[UTC 2018-12-4 03:12:09] 03:12:30 Received message from Master: op=PointingHead serial=1981 03:12:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.300000e+001 (5.950000e+001) 03:12:30 SkyScan point: az=158->10533 ze=59.5->8033 Resp=0 03:12:30 Point started: ret=0 03:12:30 point_skyscan result=0 03:12:31 Check angles 03:12:31 SkyScan query 03:12:32 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:12:32 Msec=0 True Az=157.995 Ze=59.505 Az status=0008 Ze status=0008 03:12:32 Message to Master queued w/err=0: serial=1981 error=0 03:12:37 Received message from Master: op=Filter serial=1982 03:12:37 Color wheel filter change from 0 to 0 03:12:37 FLIGetFilterPos err=0 currentPosition=0 03:12:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:12:37 Filter is already there-color wheel unchanged 03:12:37 Received message from Master: op=Shutter serial=1983 03:12:37 Shutter LASER close 03:12:37 Received message from Camera: op=State serial=1985 03:12:37 GetSingleValue result=40 Value=cccccccc 03:12:37 SkyScan query 03:12:38 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:12:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:38 Parameters OK 03:12:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:38 Set A/D data flow result=40 03:12:38 Set A/D channel type result=40 03:12:38 Set A/D encoding result=40 03:12:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:38 Set channel filter=0.000000e+000 result=40 03:12:38 Config A/D Result=40 03:12:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:38 Get A/D filter: -9.255963e+061 result=40 03:12:38 Get A/D value=-858993460 result=40 03:12:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:12:38 Parameters OK 03:12:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:12:38 Set A/D data flow result=40 03:12:38 Set A/D channel type result=40 03:12:38 Set A/D encoding result=40 03:12:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:12:38 Set channel filter=0.000000e+000 result=40 03:12:38 Config A/D Result=40 03:12:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:12:38 Get A/D filter: -9.255963e+061 result=40 03:12:38 Get A/D value=-858993460 result=40 03:12:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:12:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=59.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:12:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:12:38 Aux= 03:12:38 Message to Camera, serial 1985 queued 03:13:08 Received message from Master: op=PointingHead serial=1992 03:13:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:13:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:13:09 Point started: ret=0 03:13:09 point_skyscan result=0 03:13:10 Check angles 03:13:10 SkyScan query 03:13:10 SkyScan query done: ret=0 az=134.925<-8995 ze=89.46<-6036 Statuses=0009 0009 03:13:10 Msec=0 True Az=134.925 Ze=89.46 Az status=0009 Ze status=0009 03:13:10 Check angles 03:13:10 SkyScan query 03:13:11 SkyScan query done: ret=0 az=117.06<-7804 ze=110.805<-4613 Statuses=0009 0009 03:13:11 Msec=750 True Az=117.06 Ze=110.805 Az status=0009 Ze status=0009 03:13:11 Check angles 03:13:11 SkyScan query 03:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=131.76<-3216 Statuses=0008 0009 03:13:12 Msec=1500 True Az=112.995 Ze=131.76 Az status=0008 Ze status=0009 03:13:12 Check angles 03:13:12 SkyScan query 03:13:12 SkyScan query done: ret=0 az=112.995<-7533 ze=152.715<-1819 Statuses=0008 0009 03:13:12 Msec=2250 True Az=112.995 Ze=152.715 Az status=0008 Ze status=0009 03:13:13 Check angles 03:13:13 SkyScan query 03:13:13 SkyScan query done: ret=0 az=112.995<-7533 ze=174.105<-393 Statuses=0008 0009 03:13:13 Msec=3000 True Az=112.995 Ze=174.105 Az status=0008 Ze status=0009 03:13:13 Check angles 03:13:13 SkyScan query 03:13:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 03:13:14 Msec=3750 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 03:13:14 Message to Master queued w/err=0: serial=1992 error=0 03:13:19 Received message from Master: op=Filter serial=1993 03:13:19 Color wheel filter change from 0 to 0 03:13:19 FLIGetFilterPos err=0 currentPosition=0 03:13:19 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:19 Filter is already there-color wheel unchanged 03:13:19 Received message from Master: op=Shutter serial=1994 03:13:19 Shutter LASER open 03:13:19 Received message from Camera: op=State serial=1996 03:13:19 GetSingleValue result=40 Value=cccccccc 03:13:19 SkyScan query 03:13:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:13:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:20 Parameters OK 03:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:20 Set A/D data flow result=40 03:13:20 Set A/D channel type result=40 03:13:20 Set A/D encoding result=40 03:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:20 Set channel filter=0.000000e+000 result=40 03:13:20 Config A/D Result=40 03:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:20 Get A/D filter: -9.255963e+061 result=40 03:13:20 Get A/D value=-858993460 result=40 03:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:20 Parameters OK 03:13:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:20 Set A/D data flow result=40 03:13:20 Set A/D channel type result=40 03:13:20 Set A/D encoding result=40 03:13:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:20 Set channel filter=0.000000e+000 result=40 03:13:20 Config A/D Result=40 03:13:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:20 Get A/D filter: -9.255963e+061 result=40 03:13:20 Get A/D value=-858993460 result=40 03:13:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:20 Aux= 03:13:20 Message to Camera, serial 1996 queued 03:13:22 Received message from Master: op=Shutter serial=2000 03:13:22 Shutter LASER close 03:13:23 Received message from Master: op=PointingHead serial=2004 03:13:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.200000e+001 (6.850000e+001) 03:13:23 SkyScan point: az=158->10533 ze=68.5->7433 Resp=0 03:13:23 Point started: ret=0 03:13:23 point_skyscan result=0 03:13:24 Check angles 03:13:24 SkyScan query 03:13:25 SkyScan query done: ret=0 az=136.215<-9081 ze=156.9<-1540 Statuses=0009 0009 03:13:25 Msec=0 True Az=136.215 Ze=156.9 Az status=0009 Ze status=0009 03:13:25 Check angles 03:13:25 SkyScan query 03:13:25 SkyScan query done: ret=0 az=153.72<-10248 ze=135.945<-2937 Statuses=0009 0009 03:13:25 Msec=750 True Az=153.72 Ze=135.945 Az status=0009 Ze status=0009 03:13:25 Check angles 03:13:25 SkyScan query 03:13:26 SkyScan query done: ret=0 az=158.025<-10535 ze=114.975<-4335 Statuses=0008 0009 03:13:26 Msec=1500 True Az=158.025 Ze=114.975 Az status=0008 Ze status=0009 03:13:26 Check angles 03:13:26 SkyScan query 03:13:27 SkyScan query done: ret=0 az=157.995<-10533 ze=93.6<-5760 Statuses=0008 0009 03:13:27 Msec=2250 True Az=157.995 Ze=93.6 Az status=0008 Ze status=0009 03:13:27 Check angles 03:13:27 SkyScan query 03:13:28 SkyScan query done: ret=0 az=157.995<-10533 ze=72.615<-7159 Statuses=0008 0009 03:13:28 Msec=3000 True Az=157.995 Ze=72.615 Az status=0008 Ze status=0009 03:13:28 Check angles 03:13:28 SkyScan query 03:13:28 SkyScan query done: ret=0 az=157.995<-10533 ze=68.475<-7435 Statuses=0008 0008 03:13:28 Msec=3750 True Az=157.995 Ze=68.475 Az status=0008 Ze status=0008 03:13:28 Message to Master queued w/err=0: serial=2004 error=0 03:13:33 Received message from Master: op=Filter serial=2005 03:13:33 Color wheel filter change from 0 to 0 03:13:33 FLIGetFilterPos err=0 currentPosition=0 03:13:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:13:33 Filter is already there-color wheel unchanged 03:13:33 Received message from Master: op=Shutter serial=2006 03:13:33 Shutter LASER close 03:13:34 Received message from Camera: op=State serial=2008 03:13:34 GetSingleValue result=40 Value=cccccccc 03:13:34 SkyScan query 03:13:34 SkyScan query done: ret=0 az=157.995<-10533 ze=68.505<-7433 Statuses=0008 0008 03:13:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:34 Parameters OK 03:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:34 Set A/D data flow result=40 03:13:34 Set A/D channel type result=40 03:13:34 Set A/D encoding result=40 03:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:34 Set channel filter=0.000000e+000 result=40 03:13:34 Config A/D Result=40 03:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:34 Get A/D filter: -9.255963e+061 result=40 03:13:34 Get A/D value=-858993460 result=40 03:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:13:34 Parameters OK 03:13:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:13:34 Set A/D data flow result=40 03:13:34 Set A/D channel type result=40 03:13:34 Set A/D encoding result=40 03:13:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:13:34 Set channel filter=0.000000e+000 result=40 03:13:34 Config A/D Result=40 03:13:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:13:34 Get A/D filter: -9.255963e+061 result=40 03:13:34 Get A/D value=-858993460 result=40 03:13:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:13:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=68.504997 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:13:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:13:34 Aux= 03:13:34 Message to Camera, serial 2008 queued 03:14:05 Received message from Master: op=PointingHead serial=2015 03:14:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:14:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:14:05 Point started: ret=0 03:14:05 point_skyscan result=0 03:14:06 Check angles 03:14:06 SkyScan query 03:14:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:14:07 Msec=0 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:14:07 Message to Master queued w/err=0: serial=2015 error=0 03:14:12 Received message from Master: op=Filter serial=2016 03:14:12 Color wheel filter change from 0 to 0 03:14:12 FLIGetFilterPos err=0 currentPosition=0 03:14:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:12 Filter is already there-color wheel unchanged 03:14:12 Received message from Master: op=Shutter serial=2017 03:14:12 Shutter LASER close 03:14:12 Received message from Camera: op=State serial=2019 03:14:12 GetSingleValue result=40 Value=cccccccc 03:14:12 SkyScan query 03:14:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:13 Parameters OK 03:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:13 Set A/D data flow result=40 03:14:13 Set A/D channel type result=40 03:14:13 Set A/D encoding result=40 03:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:13 Set channel filter=0.000000e+000 result=40 03:14:13 Config A/D Result=40 03:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:13 Get A/D filter: -9.255963e+061 result=40 03:14:13 Get A/D value=-858993460 result=40 03:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:13 Parameters OK 03:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:13 Set A/D data flow result=40 03:14:13 Set A/D channel type result=40 03:14:13 Set A/D encoding result=40 03:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:13 Set channel filter=0.000000e+000 result=40 03:14:13 Config A/D Result=40 03:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:13 Get A/D filter: -9.255963e+061 result=40 03:14:13 Get A/D value=-858993460 result=40 03:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:13 Aux= 03:14:13 Message to Camera, serial 2019 queued 03:14:43 Received message from Master: op=PointingHead serial=2026 03:14:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.800000e+001 (6.450000e+001) 03:14:43 SkyScan point: az=158->10533 ze=64.5->7700 Resp=0 03:14:44 Point started: ret=0 03:14:44 point_skyscan result=0 03:14:44 Check angles 03:14:44 SkyScan query 03:14:45 SkyScan query done: ret=0 az=157.995<-10533 ze=64.5<-7700 Statuses=0008 0008 03:14:45 Msec=0 True Az=157.995 Ze=64.5 Az status=0008 Ze status=0008 03:14:45 Message to Master queued w/err=0: serial=2026 error=0 03:14:50 Received message from Master: op=Filter serial=2027 03:14:50 Color wheel filter change from 0 to 0 03:14:50 FLIGetFilterPos err=0 currentPosition=0 03:14:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:14:50 Filter is already there-color wheel unchanged 03:14:50 Received message from Master: op=Shutter serial=2028 03:14:50 Shutter LASER close 03:14:50 Received message from Camera: op=State serial=2030 03:14:50 GetSingleValue result=40 Value=cccccccc 03:14:50 SkyScan query 03:14:51 SkyScan query done: ret=0 az=157.995<-10533 ze=64.5<-7700 Statuses=0008 0008 03:14:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:51 Parameters OK 03:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:51 Set A/D data flow result=40 03:14:51 Set A/D channel type result=40 03:14:51 Set A/D encoding result=40 03:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:51 Set channel filter=0.000000e+000 result=40 03:14:51 Config A/D Result=40 03:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:51 Get A/D filter: -9.255963e+061 result=40 03:14:51 Get A/D value=-858993460 result=40 03:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:14:51 Parameters OK 03:14:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:14:51 Set A/D data flow result=40 03:14:51 Set A/D channel type result=40 03:14:51 Set A/D encoding result=40 03:14:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:14:51 Set channel filter=0.000000e+000 result=40 03:14:51 Config A/D Result=40 03:14:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:14:51 Get A/D filter: -9.255963e+061 result=40 03:14:51 Get A/D value=-858993460 result=40 03:14:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:14:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=64.500000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:14:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:14:51 Aux= 03:14:51 Message to Camera, serial 2030 queued 03:15:22 Received message from Master: op=PointingHead serial=2037 03:15:22 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.300000e+001 (5.950000e+001) 03:15:22 SkyScan point: az=158->10533 ze=59.5->8033 Resp=0 03:15:22 Point started: ret=0 03:15:22 point_skyscan result=0 03:15:23 Check angles 03:15:23 SkyScan query 03:15:23 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:15:23 Msec=0 True Az=157.995 Ze=59.505 Az status=0008 Ze status=0008 03:15:23 Message to Master queued w/err=0: serial=2037 error=0 03:15:28 Received message from Master: op=Filter serial=2038 03:15:28 Color wheel filter change from 0 to 0 03:15:28 FLIGetFilterPos err=0 currentPosition=0 03:15:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:15:28 Filter is already there-color wheel unchanged 03:15:29 Received message from Master: op=Shutter serial=2039 03:15:29 Shutter LASER close 03:15:29 Received message from Camera: op=State serial=2041 03:15:29 GetSingleValue result=40 Value=cccccccc 03:15:29 SkyScan query 03:15:29 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:15:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:29 Parameters OK 03:15:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:29 Set A/D data flow result=40 03:15:29 Set A/D channel type result=40 03:15:29 Set A/D encoding result=40 03:15:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:29 Set channel filter=0.000000e+000 result=40 03:15:29 Config A/D Result=40 03:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:29 Get A/D filter: -9.255963e+061 result=40 03:15:29 Get A/D value=-858993460 result=40 03:15:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:15:29 Parameters OK 03:15:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:15:29 Set A/D data flow result=40 03:15:29 Set A/D channel type result=40 03:15:29 Set A/D encoding result=40 03:15:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:15:29 Set channel filter=0.000000e+000 result=40 03:15:29 Config A/D Result=40 03:15:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:15:29 Get A/D filter: -9.255963e+061 result=40 03:15:29 Get A/D value=-858993460 result=40 03:15:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:15:29 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=59.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:15:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:15:29 Aux= 03:15:29 Message to Camera, serial 2041 queued 03:16:00 Received message from Master: op=PointingHead serial=2048 03:16:00 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:16:00 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:16:00 Point started: ret=0 03:16:00 point_skyscan result=0 03:16:01 Check angles 03:16:01 SkyScan query 03:16:02 SkyScan query done: ret=0 az=134.82<-8988 ze=89.73<-6018 Statuses=0009 0009 03:16:02 Msec=0 True Az=134.82 Ze=89.73 Az status=0009 Ze status=0009 03:16:02 Check angles 03:16:02 SkyScan query 03:16:02 SkyScan query done: ret=0 az=117.495<-7833 ze=110.28<-4648 Statuses=0009 0009 03:16:02 Msec=750 True Az=117.495 Ze=110.28 Az status=0009 Ze status=0009 03:16:03 Check angles 03:16:03 SkyScan query 03:16:03 SkyScan query done: ret=0 az=112.995<-7533 ze=131.625<-3225 Statuses=0008 0009 03:16:03 Msec=1500 True Az=112.995 Ze=131.625 Az status=0008 Ze status=0009 03:16:03 Check angles 03:16:03 SkyScan query 03:16:04 SkyScan query done: ret=0 az=112.995<-7533 ze=152.565<-1829 Statuses=0008 0009 03:16:04 Msec=2250 True Az=112.995 Ze=152.565 Az status=0008 Ze status=0009 03:16:04 Check angles 03:16:04 SkyScan query 03:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=173.505<-433 Statuses=0008 0009 03:16:05 Msec=3000 True Az=112.995 Ze=173.505 Az status=0008 Ze status=0009 03:16:05 Check angles 03:16:05 SkyScan query 03:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 03:16:05 Msec=3750 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 03:16:05 Message to Master queued w/err=0: serial=2048 error=0 03:16:10 Received message from Master: op=Filter serial=2049 03:16:10 Color wheel filter change from 0 to 0 03:16:10 FLIGetFilterPos err=0 currentPosition=0 03:16:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:10 Filter is already there-color wheel unchanged 03:16:11 Received message from Master: op=Shutter serial=2050 03:16:11 Shutter LASER open 03:16:11 Received message from Camera: op=State serial=2052 03:16:11 GetSingleValue result=40 Value=cccccccc 03:16:11 SkyScan query 03:16:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:16:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:11 Parameters OK 03:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:11 Set A/D data flow result=40 03:16:11 Set A/D channel type result=40 03:16:11 Set A/D encoding result=40 03:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:11 Set channel filter=0.000000e+000 result=40 03:16:11 Config A/D Result=40 03:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:11 Get A/D filter: -9.255963e+061 result=40 03:16:11 Get A/D value=-858993460 result=40 03:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:11 Parameters OK 03:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:11 Set A/D data flow result=40 03:16:11 Set A/D channel type result=40 03:16:11 Set A/D encoding result=40 03:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:11 Set channel filter=0.000000e+000 result=40 03:16:11 Config A/D Result=40 03:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:11 Get A/D filter: -9.255963e+061 result=40 03:16:11 Get A/D value=-858993460 result=40 03:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:11 Aux= 03:16:11 Message to Camera, serial 2052 queued 03:16:14 Received message from Master: op=Shutter serial=2056 03:16:14 Shutter LASER close 03:16:14 Received message from Master: op=PointingHead serial=2060 03:16:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.200000e+001 (6.850000e+001) 03:16:14 SkyScan point: az=158->10533 ze=68.5->7433 Resp=0 03:16:15 Point started: ret=0 03:16:15 point_skyscan result=0 03:16:16 Check angles 03:16:16 SkyScan query 03:16:16 SkyScan query done: ret=0 az=136.38<-9092 ze=156.84<-1544 Statuses=0009 0009 03:16:16 Msec=0 True Az=136.38 Ze=156.84 Az status=0009 Ze status=0009 03:16:16 Check angles 03:16:16 SkyScan query 03:16:17 SkyScan query done: ret=0 az=154.215<-10281 ze=135.45<-2970 Statuses=0009 0009 03:16:17 Msec=750 True Az=154.215 Ze=135.45 Az status=0009 Ze status=0009 03:16:17 Check angles 03:16:17 SkyScan query 03:16:18 SkyScan query done: ret=0 az=158.025<-10535 ze=114.48<-4368 Statuses=0008 0009 03:16:18 Msec=1500 True Az=158.025 Ze=114.48 Az status=0008 Ze status=0009 03:16:18 Check angles 03:16:18 SkyScan query 03:16:18 SkyScan query done: ret=0 az=157.995<-10533 ze=93.105<-5793 Statuses=0008 0009 03:16:18 Msec=2250 True Az=157.995 Ze=93.105 Az status=0008 Ze status=0009 03:16:19 Check angles 03:16:19 SkyScan query 03:16:19 SkyScan query done: ret=0 az=157.995<-10533 ze=72.135<-7191 Statuses=0008 0009 03:16:19 Msec=3000 True Az=157.995 Ze=72.135 Az status=0008 Ze status=0009 03:16:19 Check angles 03:16:19 SkyScan query 03:16:20 SkyScan query done: ret=0 az=157.995<-10533 ze=68.49<-7434 Statuses=0008 0008 03:16:20 Msec=3750 True Az=157.995 Ze=68.49 Az status=0008 Ze status=0008 03:16:20 Message to Master queued w/err=0: serial=2060 error=0 03:16:25 Received message from Master: op=Filter serial=2061 03:16:25 Color wheel filter change from 0 to 0 03:16:25 FLIGetFilterPos err=0 currentPosition=0 03:16:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:16:25 Filter is already there-color wheel unchanged 03:16:25 Received message from Master: op=Shutter serial=2062 03:16:25 Shutter LASER close 03:16:25 Received message from Camera: op=State serial=2064 03:16:25 GetSingleValue result=40 Value=cccccccc 03:16:25 SkyScan query 03:16:26 SkyScan query done: ret=0 az=157.995<-10533 ze=68.505<-7433 Statuses=0008 0008 03:16:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:26 Parameters OK 03:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:26 Set A/D data flow result=40 03:16:26 Set A/D channel type result=40 03:16:26 Set A/D encoding result=40 03:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:26 Set channel filter=0.000000e+000 result=40 03:16:26 Config A/D Result=40 03:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:26 Get A/D filter: -9.255963e+061 result=40 03:16:26 Get A/D value=-858993460 result=40 03:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:16:26 Parameters OK 03:16:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:16:26 Set A/D data flow result=40 03:16:26 Set A/D channel type result=40 03:16:26 Set A/D encoding result=40 03:16:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:16:26 Set channel filter=0.000000e+000 result=40 03:16:26 Config A/D Result=40 03:16:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:16:26 Get A/D filter: -9.255963e+061 result=40 03:16:26 Get A/D value=-858993460 result=40 03:16:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:16:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=68.504997 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:16:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:16:26 Aux= 03:16:26 Message to Camera, serial 2064 queued 03:16:57 Received message from Master: op=PointingHead serial=2071 03:16:57 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:16:57 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:16:57 Point started: ret=0 03:16:57 point_skyscan result=0 03:16:58 Check angles 03:16:58 SkyScan query 03:16:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:16:58 Msec=0 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:16:58 Message to Master queued w/err=0: serial=2071 error=0 03:17:03 Received message from Master: op=Filter serial=2072 03:17:03 Color wheel filter change from 0 to 0 03:17:03 FLIGetFilterPos err=0 currentPosition=0 03:17:03 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:03 Filter is already there-color wheel unchanged 03:17:04 Received message from Master: op=Shutter serial=2073 03:17:04 Shutter LASER close 03:17:04 Received message from Camera: op=State serial=2075 03:17:04 GetSingleValue result=40 Value=cccccccc 03:17:04 SkyScan query 03:17:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:17:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:04 Parameters OK 03:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:04 Set A/D data flow result=40 03:17:04 Set A/D channel type result=40 03:17:04 Set A/D encoding result=40 03:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:04 Set channel filter=0.000000e+000 result=40 03:17:04 Config A/D Result=40 03:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:04 Get A/D filter: -9.255963e+061 result=40 03:17:04 Get A/D value=-858993460 result=40 03:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:04 Parameters OK 03:17:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:04 Set A/D data flow result=40 03:17:04 Set A/D channel type result=40 03:17:04 Set A/D encoding result=40 03:17:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:04 Set channel filter=0.000000e+000 result=40 03:17:04 Config A/D Result=40 03:17:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:04 Get A/D filter: -9.255963e+061 result=40 03:17:04 Get A/D value=-858993460 result=40 03:17:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:04 Aux= 03:17:04 Message to Camera, serial 2075 queued 03:17:35 Received message from Master: op=PointingHead serial=2082 03:17:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.800000e+001 (6.450000e+001) 03:17:35 SkyScan point: az=158->10533 ze=64.5->7700 Resp=0 03:17:35 Point started: ret=0 03:17:35 point_skyscan result=0 03:17:36 Check angles 03:17:36 SkyScan query 03:17:37 SkyScan query done: ret=0 az=157.995<-10533 ze=64.5<-7700 Statuses=0008 0008 03:17:37 Msec=0 True Az=157.995 Ze=64.5 Az status=0008 Ze status=0008 03:17:37 Message to Master queued w/err=0: serial=2082 error=0 03:17:42 Received message from Master: op=Filter serial=2083 03:17:42 Color wheel filter change from 0 to 0 03:17:42 FLIGetFilterPos err=0 currentPosition=0 03:17:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:17:42 Filter is already there-color wheel unchanged 03:17:42 Received message from Master: op=Shutter serial=2084 03:17:42 Shutter LASER close 03:17:42 Received message from Camera: op=State serial=2086 03:17:42 GetSingleValue result=40 Value=cccccccc 03:17:42 SkyScan query 03:17:43 SkyScan query done: ret=0 az=157.995<-10533 ze=64.5<-7700 Statuses=0008 0008 03:17:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:43 Parameters OK 03:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:43 Set A/D data flow result=40 03:17:43 Set A/D channel type result=40 03:17:43 Set A/D encoding result=40 03:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:43 Set channel filter=0.000000e+000 result=40 03:17:43 Config A/D Result=40 03:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:43 Get A/D filter: -9.255963e+061 result=40 03:17:43 Get A/D value=-858993460 result=40 03:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:17:43 Parameters OK 03:17:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:17:43 Set A/D data flow result=40 03:17:43 Set A/D channel type result=40 03:17:43 Set A/D encoding result=40 03:17:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:17:43 Set channel filter=0.000000e+000 result=40 03:17:43 Config A/D Result=40 03:17:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:17:43 Get A/D filter: -9.255963e+061 result=40 03:17:43 Get A/D value=-858993460 result=40 03:17:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:17:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=64.500000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:17:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:17:43 Aux= 03:17:43 Message to Camera, serial 2086 queued 03:18:13 Received message from Master: op=PointingHead serial=2093 03:18:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.300000e+001 (5.950000e+001) 03:18:13 SkyScan point: az=158->10533 ze=59.5->8033 Resp=0 03:18:14 Point started: ret=0 03:18:14 point_skyscan result=0 03:18:14 Check angles 03:18:14 SkyScan query 03:18:15 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:18:15 Msec=0 True Az=157.995 Ze=59.505 Az status=0008 Ze status=0008 03:18:15 Message to Master queued w/err=0: serial=2093 error=0 03:18:20 Received message from Master: op=Filter serial=2094 03:18:20 Color wheel filter change from 0 to 0 03:18:20 FLIGetFilterPos err=0 currentPosition=0 03:18:20 FLIGetStepsRemaining err=0 RemainingSteps=0 03:18:20 Filter is already there-color wheel unchanged 03:18:20 Received message from Master: op=Shutter serial=2095 03:18:20 Shutter LASER close 03:18:20 Received message from Camera: op=State serial=2097 03:18:20 GetSingleValue result=40 Value=cccccccc 03:18:20 SkyScan query 03:18:21 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:18:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:21 Parameters OK 03:18:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:21 Set A/D data flow result=40 03:18:21 Set A/D channel type result=40 03:18:21 Set A/D encoding result=40 03:18:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:21 Set channel filter=0.000000e+000 result=40 03:18:21 Config A/D Result=40 03:18:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:21 Get A/D filter: -9.255963e+061 result=40 03:18:21 Get A/D value=-858993460 result=40 03:18:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:18:21 Parameters OK 03:18:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:18:21 Set A/D data flow result=40 03:18:21 Set A/D channel type result=40 03:18:21 Set A/D encoding result=40 03:18:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:18:21 Set channel filter=0.000000e+000 result=40 03:18:21 Config A/D Result=40 03:18:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:18:21 Get A/D filter: -9.255963e+061 result=40 03:18:21 Get A/D value=-858993460 result=40 03:18:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:18:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=59.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:18:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:18:21 Aux= 03:18:21 Message to Camera, serial 2097 queued 03:18:52 Received message from Master: op=PointingHead serial=2104 03:18:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:18:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:18:52 Point started: ret=0 03:18:52 point_skyscan result=0 03:18:53 Check angles 03:18:53 SkyScan query 03:18:53 SkyScan query done: ret=0 az=134.88<-8992 ze=89.4<-6040 Statuses=0009 0009 03:18:53 Msec=0 True Az=134.88 Ze=89.4 Az status=0009 Ze status=0009 03:18:54 Check angles 03:18:54 SkyScan query 03:18:54 SkyScan query done: ret=0 az=117.315<-7821 ze=110.325<-4645 Statuses=0009 0009 03:18:54 Msec=750 True Az=117.315 Ze=110.325 Az status=0009 Ze status=0009 03:18:54 Check angles 03:18:54 SkyScan query 03:18:55 SkyScan query done: ret=0 az=112.995<-7533 ze=131.265<-3249 Statuses=0008 0009 03:18:55 Msec=1500 True Az=112.995 Ze=131.265 Az status=0008 Ze status=0009 03:18:55 Check angles 03:18:55 SkyScan query 03:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=152.67<-1822 Statuses=0008 0009 03:18:56 Msec=2250 True Az=112.995 Ze=152.67 Az status=0008 Ze status=0009 03:18:56 Check angles 03:18:56 SkyScan query 03:18:56 SkyScan query done: ret=0 az=112.995<-7533 ze=174.06<-396 Statuses=0008 0009 03:18:56 Msec=3000 True Az=112.995 Ze=174.06 Az status=0008 Ze status=0009 03:18:57 Check angles 03:18:57 SkyScan query 03:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 03:18:57 Msec=3750 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 03:18:57 Message to Master queued w/err=0: serial=2104 error=0 03:19:02 Received message from Master: op=Filter serial=2105 03:19:02 Color wheel filter change from 0 to 0 03:19:02 FLIGetFilterPos err=0 currentPosition=0 03:19:02 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:02 Filter is already there-color wheel unchanged 03:19:02 Received message from Master: op=Shutter serial=2106 03:19:02 Shutter LASER open 03:19:02 Received message from Camera: op=State serial=2108 03:19:02 GetSingleValue result=40 Value=cccccccc 03:19:02 SkyScan query 03:19:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:19:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:03 Parameters OK 03:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:03 Set A/D data flow result=40 03:19:03 Set A/D channel type result=40 03:19:03 Set A/D encoding result=40 03:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:03 Set channel filter=0.000000e+000 result=40 03:19:03 Config A/D Result=40 03:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:03 Get A/D filter: -9.255963e+061 result=40 03:19:03 Get A/D value=-858993460 result=40 03:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:03 Parameters OK 03:19:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:03 Set A/D data flow result=40 03:19:03 Set A/D channel type result=40 03:19:03 Set A/D encoding result=40 03:19:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:03 Set channel filter=0.000000e+000 result=40 03:19:03 Config A/D Result=40 03:19:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:03 Get A/D filter: -9.255963e+061 result=40 03:19:03 Get A/D value=-858993460 result=40 03:19:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:03 Aux= 03:19:03 Message to Camera, serial 2108 queued 03:19:05 Received message from Master: op=Shutter serial=2112 03:19:06 Shutter LASER close 03:19:06 Received message from Master: op=PointingHead serial=2116 03:19:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.200000e+001 (6.850000e+001) 03:19:06 SkyScan point: az=158->10533 ze=68.5->7433 Resp=0 03:19:06 Point started: ret=0 03:19:06 point_skyscan result=0 03:19:07 Check angles 03:19:07 SkyScan query 03:19:08 SkyScan query done: ret=0 az=135.675<-9045 ze=157.515<-1499 Statuses=0009 0009 03:19:08 Msec=0 True Az=135.675 Ze=157.515 Az status=0009 Ze status=0009 03:19:08 Check angles 03:19:08 SkyScan query 03:19:09 SkyScan query done: ret=0 az=153.21<-10214 ze=136.56<-2896 Statuses=0009 0009 03:19:09 Msec=750 True Az=153.21 Ze=136.56 Az status=0009 Ze status=0009 03:19:09 Check angles 03:19:09 SkyScan query 03:19:09 SkyScan query done: ret=0 az=158.025<-10535 ze=115.59<-4294 Statuses=0008 0009 03:19:09 Msec=1500 True Az=158.025 Ze=115.59 Az status=0008 Ze status=0009 03:19:09 Check angles 03:19:09 SkyScan query 03:19:10 SkyScan query done: ret=0 az=157.995<-10533 ze=94.635<-5691 Statuses=0008 0009 03:19:10 Msec=2250 True Az=157.995 Ze=94.635 Az status=0008 Ze status=0009 03:19:10 Check angles 03:19:10 SkyScan query 03:19:11 SkyScan query done: ret=0 az=157.995<-10533 ze=73.695<-7087 Statuses=0008 0009 03:19:11 Msec=3000 True Az=157.995 Ze=73.695 Az status=0008 Ze status=0009 03:19:11 Check angles 03:19:11 SkyScan query 03:19:12 SkyScan query done: ret=0 az=157.995<-10533 ze=68.475<-7435 Statuses=0008 0008 03:19:12 Msec=3750 True Az=157.995 Ze=68.475 Az status=0008 Ze status=0008 03:19:12 Message to Master queued w/err=0: serial=2116 error=0 03:19:17 Received message from Master: op=Filter serial=2117 03:19:17 Color wheel filter change from 0 to 0 03:19:17 FLIGetFilterPos err=0 currentPosition=0 03:19:17 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:17 Filter is already there-color wheel unchanged 03:19:17 Received message from Master: op=Shutter serial=2118 03:19:17 Shutter LASER close 03:19:17 Received message from Camera: op=State serial=2120 03:19:17 GetSingleValue result=40 Value=cccccccc 03:19:17 SkyScan query 03:19:17 SkyScan query done: ret=0 az=157.995<-10533 ze=68.505<-7433 Statuses=0008 0008 03:19:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:17 Parameters OK 03:19:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:17 Set A/D data flow result=40 03:19:17 Set A/D channel type result=40 03:19:17 Set A/D encoding result=40 03:19:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:17 Set channel filter=0.000000e+000 result=40 03:19:17 Config A/D Result=40 03:19:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:17 Get A/D filter: -9.255963e+061 result=40 03:19:17 Get A/D value=-858993460 result=40 03:19:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:17 Parameters OK 03:19:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:17 Set A/D data flow result=40 03:19:17 Set A/D channel type result=40 03:19:17 Set A/D encoding result=40 03:19:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:17 Set channel filter=0.000000e+000 result=40 03:19:17 Config A/D Result=40 03:19:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:17 Get A/D filter: -9.255963e+061 result=40 03:19:17 Get A/D value=-858993460 result=40 03:19:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=68.504997 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:17 Aux= 03:19:17 Message to Camera, serial 2120 queued 03:19:48 Received message from Master: op=PointingHead serial=2127 03:19:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:19:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:19:49 Point started: ret=0 03:19:49 point_skyscan result=0 03:19:49 Check angles 03:19:49 SkyScan query 03:19:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:19:50 Msec=0 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 03:19:50 Message to Master queued w/err=0: serial=2127 error=0 03:19:55 Received message from Master: op=Filter serial=2128 03:19:55 Color wheel filter change from 0 to 0 03:19:55 FLIGetFilterPos err=0 currentPosition=0 03:19:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:19:55 Filter is already there-color wheel unchanged 03:19:55 Received message from Master: op=Shutter serial=2129 03:19:55 Shutter LASER close 03:19:55 Received message from Camera: op=State serial=2131 03:19:55 GetSingleValue result=40 Value=cccccccc 03:19:55 SkyScan query 03:19:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:19:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:56 Parameters OK 03:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:56 Set A/D data flow result=40 03:19:56 Set A/D channel type result=40 03:19:56 Set A/D encoding result=40 03:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:56 Set channel filter=0.000000e+000 result=40 03:19:56 Config A/D Result=40 03:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:56 Get A/D filter: -9.255963e+061 result=40 03:19:56 Get A/D value=-858993460 result=40 03:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:19:56 Parameters OK 03:19:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:19:56 Set A/D data flow result=40 03:19:56 Set A/D channel type result=40 03:19:56 Set A/D encoding result=40 03:19:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:19:56 Set channel filter=0.000000e+000 result=40 03:19:56 Config A/D Result=40 03:19:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:19:56 Get A/D filter: -9.255963e+061 result=40 03:19:56 Get A/D value=-858993460 result=40 03:19:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:19:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:19:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:19:56 Aux= 03:19:56 Message to Camera, serial 2131 queued 03:20:27 Received message from Master: op=PointingHead serial=2138 03:20:27 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.800000e+001 (6.450000e+001) 03:20:27 SkyScan point: az=158->10533 ze=64.5->7700 Resp=0 03:20:27 Point started: ret=0 03:20:27 point_skyscan result=0 03:20:28 Check angles 03:20:28 SkyScan query 03:20:28 SkyScan query done: ret=0 az=157.995<-10533 ze=64.5<-7700 Statuses=0008 0008 03:20:28 Msec=0 True Az=157.995 Ze=64.5 Az status=0008 Ze status=0008 03:20:28 Message to Master queued w/err=0: serial=2138 error=0 03:20:33 Received message from Master: op=Filter serial=2139 03:20:33 Color wheel filter change from 0 to 0 03:20:33 FLIGetFilterPos err=0 currentPosition=0 03:20:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:20:33 Filter is already there-color wheel unchanged 03:20:34 Received message from Master: op=Shutter serial=2140 03:20:34 Shutter LASER close 03:20:34 Received message from Camera: op=State serial=2142 03:20:34 GetSingleValue result=40 Value=cccccccc 03:20:34 SkyScan query 03:20:34 SkyScan query done: ret=0 az=157.995<-10533 ze=64.5<-7700 Statuses=0008 0008 03:20:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:34 Parameters OK 03:20:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:34 Set A/D data flow result=40 03:20:34 Set A/D channel type result=40 03:20:34 Set A/D encoding result=40 03:20:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:34 Set channel filter=0.000000e+000 result=40 03:20:34 Config A/D Result=40 03:20:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:34 Get A/D filter: -9.255963e+061 result=40 03:20:34 Get A/D value=-858993460 result=40 03:20:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:20:34 Parameters OK 03:20:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:20:34 Set A/D data flow result=40 03:20:34 Set A/D channel type result=40 03:20:34 Set A/D encoding result=40 03:20:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:20:34 Set channel filter=0.000000e+000 result=40 03:20:34 Config A/D Result=40 03:20:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:20:34 Get A/D filter: -9.255963e+061 result=40 03:20:34 Get A/D value=-858993460 result=40 03:20:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:20:34 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=64.500000 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:20:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:20:34 Aux= 03:20:34 Message to Camera, serial 2142 queued 03:21:05 Received message from Master: op=PointingHead serial=2149 03:21:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=5.300000e+001 (5.950000e+001) 03:21:05 SkyScan point: az=158->10533 ze=59.5->8033 Resp=0 03:21:05 Point started: ret=0 03:21:05 point_skyscan result=0 03:21:06 Check angles 03:21:06 SkyScan query 03:21:07 SkyScan query done: ret=0 az=157.995<-10533 ze=59.505<-8033 Statuses=0008 0008 03:21:07 Msec=0 True Az=157.995 Ze=59.505 Az status=0008 Ze status=0008 03:21:07 Message to Master queued w/err=0: serial=2149 error=0 03:21:48 Received message from Master: op=Identify serial=111 03:21:57 Received message from Master: op=Log directory change serial=115 03:21:57 Log file directory remains C:\PKZPrograms\Logs\20181204 03:21:57 Log file name is PKZ20181204032157_Observatory.txt 03:22:55 Received message from Master: op=PointingHead serial=124 03:22:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:22:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:22:56 Point started: ret=0 03:22:56 point_skyscan result=0 03:22:57 Check angles 03:22:57 SkyScan query 03:22:57 SkyScan query done: ret=0 az=133.905<-8927 ze=90.585<-5961 Statuses=0009 0009 03:22:57 Msec=0 True Az=133.905 Ze=90.585 Az status=0009 Ze status=0009 03:22:57 Check angles 03:22:57 SkyScan query 03:22:58 SkyScan query done: ret=0 az=116.13<-7742 ze=111.99<-4534 Statuses=0009 0009 03:22:58 Msec=750 True Az=116.13 Ze=111.99 Az status=0009 Ze status=0009 03:22:58 Check angles 03:22:58 SkyScan query 03:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=132.93<-3138 Statuses=0008 0009 03:22:59 Msec=1500 True Az=112.995 Ze=132.93 Az status=0008 Ze status=0009 03:22:59 Check angles 03:22:59 SkyScan query 03:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=153.9<-1740 Statuses=0008 0009 03:22:59 Msec=2250 True Az=112.995 Ze=153.9 Az status=0008 Ze status=0009 03:23:00 Check angles 03:23:00 SkyScan query 03:23:00 SkyScan query done: ret=0 az=112.995<-7533 ze=174.84<-344 Statuses=0008 0009 03:23:00 Msec=3000 True Az=112.995 Ze=174.84 Az status=0008 Ze status=0009 03:23:00 Check angles 03:23:00 SkyScan query 03:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.95<-23530 Statuses=0008 0008 03:23:01 Msec=3750 True Az=112.995 Ze=-172.95 Az status=0008 Ze status=0008 03:23:01 Message to Master queued w/err=0: serial=124 error=0 03:23:07 Received message from Master: op=Filter serial=125 03:23:07 Color wheel filter change from 0 to 2 03:23:07 FLIGetFilterPos err=0 currentPosition=0 03:23:07 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:10 FLISetFilterPos err=0 rqPosition=2 03:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:10 Check after 0.00 sec for filter wheel DIn/CWh=0 03:23:10 FLIGetFilterPos err=0 currentPosition=2 03:23:10 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:16 Received message from Master: op=Shutter serial=126 03:23:16 Shutter LASER close 03:23:16 Received message from Camera: op=State serial=128 03:23:16 GetSingleValue result=40 Value=cccccccc 03:23:16 SkyScan query 03:23:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:17 Parameters OK 03:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:17 Set A/D data flow result=40 03:23:17 Set A/D channel type result=40 03:23:17 Set A/D encoding result=40 03:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:17 Set channel filter=0.000000e+000 result=40 03:23:17 Config A/D Result=40 03:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:17 Get A/D filter: -9.255963e+061 result=40 03:23:17 Get A/D value=-858993460 result=40 03:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:17 Parameters OK 03:23:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:17 Set A/D data flow result=40 03:23:17 Set A/D channel type result=40 03:23:17 Set A/D encoding result=40 03:23:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:17 Set channel filter=0.000000e+000 result=40 03:23:17 Config A/D Result=40 03:23:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:17 Get A/D filter: -9.255963e+061 result=40 03:23:17 Get A/D value=-858993460 result=40 03:23:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:17 Aux= 03:23:17 Message to Camera, serial 128 queued 03:23:28 Received message from Master: op=PointingHead serial=133 03:23:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:23:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:23:28 Point started: ret=0 03:23:28 point_skyscan result=0 03:23:29 Check angles 03:23:29 SkyScan query 03:23:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:30 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:23:30 Message to Master queued w/err=0: serial=133 error=0 03:23:36 Received message from Master: op=Filter serial=134 03:23:36 Color wheel filter change from 2 to 2 03:23:36 FLIGetFilterPos err=0 currentPosition=2 03:23:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:23:36 Filter is already there-color wheel unchanged 03:23:41 Received message from Master: op=Shutter serial=135 03:23:41 Shutter LASER close 03:23:41 Received message from Camera: op=State serial=137 03:23:41 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-4 03:23:41] 03:23:41 SkyScan query 03:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:23:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:44 Parameters OK 03:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:44 Set A/D data flow result=40 03:23:45 Set A/D channel type result=40 03:23:45 Set A/D encoding result=40 03:23:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:45 Set channel filter=0.000000e+000 result=40 03:23:45 Config A/D Result=40 03:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:45 Get A/D filter: -9.255963e+061 result=40 03:23:45 Get A/D value=-858993460 result=40 03:23:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:23:45 Parameters OK 03:23:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:23:45 Set A/D data flow result=40 03:23:45 Set A/D channel type result=40 03:23:45 Set A/D encoding result=40 03:23:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:23:45 Set channel filter=0.000000e+000 result=40 03:23:45 Config A/D Result=40 03:23:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:23:45 Get A/D filter: -9.255963e+061 result=40 03:23:45 Get A/D value=-858993460 result=40 03:23:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:23:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:23:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:23:45 Aux= 03:23:45 Message to Camera, serial 137 queued 03:24:20 Received message from Master: op=PointingHead serial=142 03:24:20 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:24:20 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:24:21 Point started: ret=0 03:24:21 point_skyscan result=0 03:24:22 Check angles 03:24:22 SkyScan query 03:24:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:22 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:24:22 Message to Master queued w/err=0: serial=142 error=0 03:24:28 Received message from Master: op=Filter serial=143 03:24:28 Color wheel filter change from 2 to 2 03:24:28 FLIGetFilterPos err=0 currentPosition=2 03:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:28 Filter is already there-color wheel unchanged 03:24:34 Received message from Master: op=Shutter serial=144 03:24:34 Shutter LASER open 03:24:34 Received message from Camera: op=State serial=146 03:24:34 GetSingleValue result=40 Value=cccccccc 03:24:34 SkyScan query 03:24:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:35 Parameters OK 03:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:35 Set A/D data flow result=40 03:24:35 Set A/D channel type result=40 03:24:35 Set A/D encoding result=40 03:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:35 Set channel filter=0.000000e+000 result=40 03:24:35 Config A/D Result=40 03:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:35 Get A/D filter: -9.255963e+061 result=40 03:24:35 Get A/D value=-858993460 result=40 03:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:24:35 Parameters OK 03:24:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:24:35 Set A/D data flow result=40 03:24:35 Set A/D channel type result=40 03:24:35 Set A/D encoding result=40 03:24:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:24:35 Set channel filter=0.000000e+000 result=40 03:24:35 Config A/D Result=40 03:24:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:24:35 Get A/D filter: -9.255963e+061 result=40 03:24:35 Get A/D value=-858993460 result=40 03:24:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:24:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:24:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:24:35 Aux= 03:24:35 Message to Camera, serial 146 queued 03:24:37 Received message from Master: op=Shutter serial=148 03:24:37 Shutter LASER close 03:24:46 Received message from Master: op=PointingHead serial=152 03:24:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:24:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:24:46 Point started: ret=0 03:24:46 point_skyscan result=0 03:24:47 Check angles 03:24:47 SkyScan query 03:24:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:24:48 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 03:24:48 Message to Master queued w/err=0: serial=152 error=0 03:24:53 Received message from Master: op=Filter serial=153 03:24:53 Color wheel filter change from 2 to 2 03:24:53 FLIGetFilterPos err=0 currentPosition=2 03:24:53 FLIGetStepsRemaining err=0 RemainingSteps=0 03:24:53 Filter is already there-color wheel unchanged 03:24:59 Received message from Master: op=Shutter serial=154 03:24:59 Shutter LASER close 03:24:59 Received message from Camera: op=State serial=156 03:24:59 GetSingleValue result=40 Value=cccccccc 03:24:59 SkyScan query 03:25:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:25:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:00 Parameters OK 03:25:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:00 Set A/D data flow result=40 03:25:00 Set A/D channel type result=40 03:25:00 Set A/D encoding result=40 03:25:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:00 Set channel filter=0.000000e+000 result=40 03:25:00 Config A/D Result=40 03:25:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:00 Get A/D filter: -9.255963e+061 result=40 03:25:00 Get A/D value=-858993460 result=40 03:25:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:00 Parameters OK 03:25:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:00 Set A/D data flow result=40 03:25:00 Set A/D channel type result=40 03:25:00 Set A/D encoding result=40 03:25:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:00 Set channel filter=0.000000e+000 result=40 03:25:00 Config A/D Result=40 03:25:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:00 Get A/D filter: -9.255963e+061 result=40 03:25:00 Get A/D value=-858993460 result=40 03:25:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:00 Aux= 03:25:00 Message to Camera, serial 156 queued 03:25:20 Received message from Master: op=PointingHead serial=161 03:25:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:25:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:25:20 Point started: ret=0 03:25:20 point_skyscan result=0 03:25:21 Check angles 03:25:21 SkyScan query 03:25:21 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.53<-21502 Statuses=0009 0009 03:25:21 Msec=0 True Az=136.485 Ze=-142.53 Az status=0009 Ze status=0009 03:25:21 Check angles 03:25:21 SkyScan query 03:25:22 SkyScan query done: ret=0 az=154.395<-10293 ze=-121.125<-20075 Statuses=0009 0009 03:25:22 Msec=750 True Az=154.395 Ze=-121.125 Az status=0009 Ze status=0009 03:25:22 Check angles 03:25:22 SkyScan query 03:25:23 SkyScan query done: ret=0 az=171.855<-11457 ze=-100.155<-18677 Statuses=0009 0009 03:25:23 Msec=1500 True Az=171.855 Ze=-100.155 Az status=0009 Ze status=0009 03:25:23 Check angles 03:25:23 SkyScan query 03:25:24 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.215<-17281 Statuses=0008 0009 03:25:24 Msec=2250 True Az=176.025 Ze=-79.215 Az status=0008 Ze status=0009 03:25:24 Check angles 03:25:24 SkyScan query 03:25:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.84<-15856 Statuses=0008 0009 03:25:24 Msec=3000 True Az=175.995 Ze=-57.84 Az status=0008 Ze status=0009 03:25:24 Check angles 03:25:24 SkyScan query 03:25:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.48<-15432 Statuses=0008 0008 03:25:25 Msec=3750 True Az=175.995 Ze=-51.48 Az status=0008 Ze status=0008 03:25:25 Message to Master queued w/err=0: serial=161 error=0 03:25:31 Received message from Master: op=Filter serial=162 03:25:31 Color wheel filter change from 2 to 0 03:25:31 FLIGetFilterPos err=0 currentPosition=2 03:25:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:37 FLISetFilterPos err=0 rqPosition=0 03:25:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:37 Check after 0.00 sec for filter wheel DIn/CWh=0 03:25:37 FLIGetFilterPos err=0 currentPosition=0 03:25:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:25:42 Received message from Master: op=Shutter serial=163 03:25:42 Shutter LASER close 03:25:42 Received message from Camera: op=State serial=165 03:25:42 GetSingleValue result=40 Value=cccccccc 03:25:42 SkyScan query 03:25:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.51<-15434 Statuses=0008 0008 03:25:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:43 Parameters OK 03:25:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:43 Set A/D data flow result=40 03:25:43 Set A/D channel type result=40 03:25:43 Set A/D encoding result=40 03:25:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:43 Set channel filter=0.000000e+000 result=40 03:25:43 Config A/D Result=40 03:25:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:43 Get A/D filter: -9.255963e+061 result=40 03:25:43 Get A/D value=-858993460 result=40 03:25:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:25:43 Parameters OK 03:25:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:25:43 Set A/D data flow result=40 03:25:43 Set A/D channel type result=40 03:25:43 Set A/D encoding result=40 03:25:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:25:43 Set channel filter=0.000000e+000 result=40 03:25:43 Config A/D Result=40 03:25:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:25:43 Get A/D filter: -9.255963e+061 result=40 03:25:43 Get A/D value=-858993460 result=40 03:25:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:25:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.509998 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:25:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:25:43 Aux= 03:25:43 Message to Camera, serial 165 queued 03:26:25 Received message from Master: op=PointingHead serial=170 03:26:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:26:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:26:26 Point started: ret=0 03:26:26 point_skyscan result=0 03:26:27 Check angles 03:26:27 SkyScan query 03:26:27 SkyScan query done: ret=0 az=152.04<-10136 ze=-20.79<-13386 Statuses=0009 0009 03:26:27 Msec=0 True Az=152.04 Ze=-20.79 Az status=0009 Ze status=0009 03:26:27 Check angles 03:26:27 SkyScan query 03:26:28 SkyScan query done: ret=0 az=134.175<-8945 ze=0.6<-11960 Statuses=0009 0009 03:26:28 Msec=750 True Az=134.175 Ze=0.6 Az status=0009 Ze status=0009 03:26:28 Check angles 03:26:28 SkyScan query 03:26:29 SkyScan query done: ret=0 az=116.775<-7785 ze=21.555<-10563 Statuses=0009 0009 03:26:29 Msec=1500 True Az=116.775 Ze=21.555 Az status=0009 Ze status=0009 03:26:29 Check angles 03:26:29 SkyScan query 03:26:29 SkyScan query done: ret=0 az=99.315<-6621 ze=42.525<-9165 Statuses=0009 0009 03:26:29 Msec=2250 True Az=99.315 Ze=42.525 Az status=0009 Ze status=0009 03:26:30 Check angles 03:26:30 SkyScan query 03:26:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 03:26:30 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 03:26:30 Check angles 03:26:30 SkyScan query 03:26:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:26:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:26:31 Message to Master queued w/err=0: serial=170 error=0 03:26:37 Received message from Master: op=Filter serial=171 03:26:37 Color wheel filter change from 0 to 0 03:26:37 FLIGetFilterPos err=0 currentPosition=0 03:26:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:26:37 Filter is already there-color wheel unchanged 03:26:41 Received message from Master: op=Shutter serial=172 03:26:41 Shutter LASER close 03:26:42 Received message from Camera: op=State serial=174 03:26:42 GetSingleValue result=40 Value=cccccccc 03:26:42 SkyScan query 03:26:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:26:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:42 Parameters OK 03:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:42 Set A/D data flow result=40 03:26:42 Set A/D channel type result=40 03:26:42 Set A/D encoding result=40 03:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:42 Set channel filter=0.000000e+000 result=40 03:26:42 Config A/D Result=40 03:26:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:42 Get A/D filter: -9.255963e+061 result=40 03:26:42 Get A/D value=-858993460 result=40 03:26:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:26:42 Parameters OK 03:26:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:26:42 Set A/D data flow result=40 03:26:42 Set A/D channel type result=40 03:26:42 Set A/D encoding result=40 03:26:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:26:43 Set channel filter=0.000000e+000 result=40 03:26:43 Config A/D Result=40 03:26:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:26:43 Get A/D filter: -9.255963e+061 result=40 03:26:43 Get A/D value=-858993460 result=40 03:26:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:26:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:26:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:26:43 Aux= 03:26:43 Message to Camera, serial 174 queued 03:27:25 Received message from Master: op=PointingHead serial=180 03:27:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:27:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:27:26 Point started: ret=0 03:27:26 point_skyscan result=0 03:27:27 Check angles 03:27:27 SkyScan query 03:27:27 SkyScan query done: ret=0 az=109.965<-7331 ze=38.49<-9434 Statuses=0009 0008 03:27:27 Msec=0 True Az=109.965 Ze=38.49 Az status=0009 Ze status=0008 03:27:27 Check angles 03:27:27 SkyScan query 03:27:28 SkyScan query done: ret=0 az=127.38<-8492 ze=38.505<-9433 Statuses=0009 0008 03:27:28 Msec=750 True Az=127.38 Ze=38.505 Az status=0009 Ze status=0008 03:27:28 Check angles 03:27:28 SkyScan query 03:27:29 SkyScan query done: ret=0 az=145.2<-9680 ze=38.505<-9433 Statuses=0009 0008 03:27:29 Msec=1500 True Az=145.2 Ze=38.505 Az status=0009 Ze status=0008 03:27:29 Check angles 03:27:29 SkyScan query 03:27:29 SkyScan query done: ret=0 az=162.705<-10847 ze=38.505<-9433 Statuses=0009 0008 03:27:29 Msec=2250 True Az=162.705 Ze=38.505 Az status=0009 Ze status=0008 03:27:30 Check angles 03:27:30 SkyScan query 03:27:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:27:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:27:30 Check angles 03:27:30 SkyScan query 03:27:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:27:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:27:31 Message to Master queued w/err=0: serial=180 error=0 03:27:37 Received message from Master: op=Filter serial=181 03:27:37 Color wheel filter change from 0 to 0 03:27:37 FLIGetFilterPos err=0 currentPosition=0 03:27:37 FLIGetStepsRemaining err=0 RemainingSteps=0 03:27:37 Filter is already there-color wheel unchanged 03:27:42 Received message from Master: op=Shutter serial=182 03:27:42 Shutter LASER close 03:27:42 Received message from Camera: op=State serial=184 03:27:42 GetSingleValue result=40 Value=cccccccc 03:27:42 SkyScan query 03:27:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:27:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:42 Parameters OK 03:27:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:42 Set A/D data flow result=40 03:27:42 Set A/D channel type result=40 03:27:42 Set A/D encoding result=40 03:27:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:42 Set channel filter=0.000000e+000 result=40 03:27:42 Config A/D Result=40 03:27:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:42 Get A/D filter: -9.255963e+061 result=40 03:27:42 Get A/D value=-858993460 result=40 03:27:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:27:43 Parameters OK 03:27:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:27:43 Set A/D data flow result=40 03:27:43 Set A/D channel type result=40 03:27:43 Set A/D encoding result=40 03:27:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:27:43 Set channel filter=0.000000e+000 result=40 03:27:43 Config A/D Result=40 03:27:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:27:43 Get A/D filter: -9.255963e+061 result=40 03:27:43 Get A/D value=-858993460 result=40 03:27:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:27:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:27:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:27:43 Aux= 03:27:43 Message to Camera, serial 184 queued 03:28:25 Received message from Master: op=PointingHead serial=190 03:28:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:28:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:28:26 Point started: ret=0 03:28:26 point_skyscan result=0 03:28:26 Check angles 03:28:26 SkyScan query 03:28:27 SkyScan query done: ret=0 az=151.845<-10123 ze=7.215<-11519 Statuses=0009 0009 03:28:27 Msec=0 True Az=151.845 Ze=7.215 Az status=0009 Ze status=0009 03:28:27 Check angles 03:28:27 SkyScan query 03:28:28 SkyScan query done: ret=0 az=133.86<-8924 ze=-14.175<-12945 Statuses=0009 0009 03:28:28 Msec=750 True Az=133.86 Ze=-14.175 Az status=0009 Ze status=0009 03:28:28 Check angles 03:28:28 SkyScan query 03:28:28 SkyScan query done: ret=0 az=116.46<-7764 ze=-35.13<-14342 Statuses=0009 0009 03:28:28 Msec=1500 True Az=116.46 Ze=-35.13 Az status=0009 Ze status=0009 03:28:29 Check angles 03:28:29 SkyScan query 03:28:29 SkyScan query done: ret=0 az=98.91<-6594 ze=-51.54<-15436 Statuses=0009 0009 03:28:29 Msec=2250 True Az=98.91 Ze=-51.54 Az status=0009 Ze status=0009 03:28:29 Check angles 03:28:29 SkyScan query 03:28:30 SkyScan query done: ret=0 az=85.98<-5732 ze=-51.54<-15436 Statuses=0009 0008 03:28:30 Msec=3000 True Az=85.98 Ze=-51.54 Az status=0009 Ze status=0008 03:28:30 Check angles 03:28:30 SkyScan query 03:28:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:28:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:28:31 Message to Master queued w/err=0: serial=190 error=0 03:28:36 Received message from Master: op=Filter serial=191 03:28:36 Color wheel filter change from 0 to 0 03:28:36 FLIGetFilterPos err=0 currentPosition=0 03:28:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:28:36 Filter is already there-color wheel unchanged 03:28:41 Received message from Master: op=Shutter serial=192 03:28:41 Shutter LASER close 03:28:42 Received message from Camera: op=State serial=194 03:28:42 GetSingleValue result=40 Value=cccccccc 03:28:42 SkyScan query 03:28:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:28:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:42 Parameters OK 03:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:42 Set A/D data flow result=40 03:28:42 Set A/D channel type result=40 03:28:42 Set A/D encoding result=40 03:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:42 Set channel filter=0.000000e+000 result=40 03:28:42 Config A/D Result=40 03:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:42 Get A/D filter: -9.255963e+061 result=40 03:28:42 Get A/D value=-858993460 result=40 03:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:28:42 Parameters OK 03:28:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:28:42 Set A/D data flow result=40 03:28:42 Set A/D channel type result=40 03:28:42 Set A/D encoding result=40 03:28:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:28:42 Set channel filter=0.000000e+000 result=40 03:28:42 Config A/D Result=40 03:28:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:28:42 Get A/D filter: -9.255963e+061 result=40 03:28:42 Get A/D value=-858993460 result=40 03:28:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:28:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:28:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:28:42 Aux= 03:28:42 Message to Camera, serial 194 queued 03:29:25 Received message from Master: op=PointingHead serial=200 03:29:25 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:29:25 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:29:25 Point started: ret=0 03:29:25 point_skyscan result=0 03:29:26 Check angles 03:29:26 SkyScan query 03:29:27 SkyScan query done: ret=0 az=109.875<-7325 ze=-82.335<-17489 Statuses=0009 0009 03:29:27 Msec=0 True Az=109.875 Ze=-82.335 Az status=0009 Ze status=0009 03:29:27 Check angles 03:29:27 SkyScan query 03:29:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-103.29<-18886 Statuses=0008 0009 03:29:27 Msec=750 True Az=113.01 Ze=-103.29 Az status=0008 Ze status=0009 03:29:28 Check angles 03:29:28 SkyScan query 03:29:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.68<-20312 Statuses=0008 0009 03:29:28 Msec=1500 True Az=113.01 Ze=-124.68 Az status=0008 Ze status=0009 03:29:28 Check angles 03:29:28 SkyScan query 03:29:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-146.085<-21739 Statuses=0008 0009 03:29:29 Msec=2250 True Az=112.995 Ze=-146.085 Az status=0008 Ze status=0009 03:29:29 Check angles 03:29:29 SkyScan query 03:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-167.04<-23136 Statuses=0008 0009 03:29:30 Msec=3000 True Az=112.995 Ze=-167.04 Az status=0008 Ze status=0009 03:29:30 Check angles 03:29:30 SkyScan query 03:29:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:29:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:29:30 Message to Master queued w/err=0: serial=200 error=0 03:29:36 Received message from Master: op=Filter serial=201 03:29:36 Color wheel filter change from 0 to 0 03:29:36 FLIGetFilterPos err=0 currentPosition=0 03:29:36 FLIGetStepsRemaining err=0 RemainingSteps=0 03:29:36 Filter is already there-color wheel unchanged 03:29:41 Received message from Master: op=Shutter serial=202 03:29:41 Shutter LASER open 03:29:44 Received message from Camera: op=State serial=204 03:29:44 GetSingleValue result=40 Value=cccccccc 03:29:44 SkyScan query 03:29:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:29:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:45 Parameters OK 03:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:45 Set A/D data flow result=40 03:29:45 Set A/D channel type result=40 03:29:45 Set A/D encoding result=40 03:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:45 Set channel filter=0.000000e+000 result=40 03:29:45 Config A/D Result=40 03:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:45 Get A/D filter: -9.255963e+061 result=40 03:29:45 Get A/D value=-858993460 result=40 03:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:29:45 Parameters OK 03:29:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:29:45 Set A/D data flow result=40 03:29:45 Set A/D channel type result=40 03:29:45 Set A/D encoding result=40 03:29:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:29:45 Set channel filter=0.000000e+000 result=40 03:29:45 Config A/D Result=40 03:29:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:29:45 Get A/D filter: -9.255963e+061 result=40 03:29:45 Get A/D value=-858993460 result=40 03:29:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:29:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:29:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:29:45 Aux= 03:29:45 Message to Camera, serial 204 queued 03:29:47 Received message from Master: op=Shutter serial=206 03:29:47 Shutter LASER close 03:30:01 Received message from Master: op=PointingHead serial=210 03:30:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:30:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:30:01 Point started: ret=0 03:30:01 point_skyscan result=0 03:30:02 Check angles 03:30:02 SkyScan query 03:30:02 SkyScan query done: ret=0 az=89.205<-5947 ze=156.51<-1566 Statuses=0009 0009 03:30:02 Msec=0 True Az=89.205 Ze=156.51 Az status=0009 Ze status=0009 03:30:02 Check angles 03:30:02 SkyScan query 03:30:03 SkyScan query done: ret=0 az=71.85<-4790 ze=135.525<-2965 Statuses=0009 0009 03:30:03 Msec=750 True Az=71.85 Ze=135.525 Az status=0009 Ze status=0009 03:30:03 Check angles 03:30:03 SkyScan query 03:30:04 SkyScan query done: ret=0 az=54.555<-3637 ze=114.585<-4361 Statuses=0009 0009 03:30:04 Msec=1500 True Az=54.555 Ze=114.585 Az status=0009 Ze status=0009 03:30:04 Check angles 03:30:04 SkyScan query 03:30:05 SkyScan query done: ret=0 az=40.875<-2725 ze=93.645<-5757 Statuses=0009 0009 03:30:05 Msec=2250 True Az=40.875 Ze=93.645 Az status=0009 Ze status=0009 03:30:05 Check angles 03:30:05 SkyScan query 03:30:05 SkyScan query done: ret=0 az=41.01<-2734 ze=72.66<-7156 Statuses=0008 0009 03:30:05 Msec=3000 True Az=41.01 Ze=72.66 Az status=0008 Ze status=0009 03:30:05 Check angles 03:30:05 SkyScan query 03:30:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 03:30:06 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 03:30:06 Check angles 03:30:06 SkyScan query 03:30:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:30:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:30:07 Message to Master queued w/err=0: serial=210 error=0 03:30:12 Received message from Master: op=Filter serial=211 03:30:12 Color wheel filter change from 0 to 0 03:30:12 FLIGetFilterPos err=0 currentPosition=0 03:30:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:30:12 Filter is already there-color wheel unchanged 03:30:17 Received message from Master: op=Shutter serial=212 03:30:17 Shutter LASER close 03:30:18 Received message from Camera: op=State serial=214 03:30:18 GetSingleValue result=40 Value=cccccccc 03:30:18 SkyScan query 03:30:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:30:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:18 Parameters OK 03:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:18 Set A/D data flow result=40 03:30:18 Set A/D channel type result=40 03:30:18 Set A/D encoding result=40 03:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:18 Set channel filter=0.000000e+000 result=40 03:30:18 Config A/D Result=40 03:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:18 Get A/D filter: -9.255963e+061 result=40 03:30:18 Get A/D value=-858993460 result=40 03:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:30:18 Parameters OK 03:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:30:18 Set A/D data flow result=40 03:30:18 Set A/D channel type result=40 03:30:18 Set A/D encoding result=40 03:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:30:18 Set channel filter=0.000000e+000 result=40 03:30:18 Config A/D Result=40 03:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:30:19 Get A/D filter: -9.255963e+061 result=40 03:30:19 Get A/D value=-858993460 result=40 03:30:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:30:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:30:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:30:19 Aux= 03:30:19 Message to Camera, serial 214 queued 03:31:00 Received message from Master: op=PointingHead serial=219 03:31:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:31:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:31:01 Point started: ret=0 03:31:01 point_skyscan result=0 03:31:02 Check angles 03:31:02 SkyScan query 03:31:02 SkyScan query done: ret=0 az=64.515<-4301 ze=66.555<-7563 Statuses=0009 0008 03:31:02 Msec=0 True Az=64.515 Ze=66.555 Az status=0009 Ze status=0008 03:31:02 Check angles 03:31:02 SkyScan query 03:31:03 SkyScan query done: ret=0 az=82.14<-5476 ze=66.495<-7567 Statuses=0009 0008 03:31:03 Msec=750 True Az=82.14 Ze=66.495 Az status=0009 Ze status=0008 03:31:03 Check angles 03:31:03 SkyScan query 03:31:04 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 03:31:04 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 03:31:04 Check angles 03:31:04 SkyScan query 03:31:04 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 03:31:04 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 03:31:05 Check angles 03:31:05 SkyScan query 03:31:05 SkyScan query done: ret=0 az=134.895<-8993 ze=66.495<-7567 Statuses=0009 0008 03:31:05 Msec=3000 True Az=134.895 Ze=66.495 Az status=0009 Ze status=0008 03:31:05 Check angles 03:31:05 SkyScan query 03:31:06 SkyScan query done: ret=0 az=152.145<-10143 ze=66.495<-7567 Statuses=0009 0008 03:31:06 Msec=3750 True Az=152.145 Ze=66.495 Az status=0009 Ze status=0008 03:31:06 Check angles 03:31:06 SkyScan query 03:31:07 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 03:31:07 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 03:31:07 Message to Master queued w/err=0: serial=219 error=0 03:31:12 Received message from Master: op=Filter serial=220 03:31:12 Color wheel filter change from 0 to 0 03:31:12 FLIGetFilterPos err=0 currentPosition=0 03:31:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:31:12 Filter is already there-color wheel unchanged 03:31:17 Received message from Master: op=Shutter serial=221 03:31:17 Shutter LASER close 03:31:17 Received message from Camera: op=State serial=223 03:31:17 GetSingleValue result=40 Value=cccccccc 03:31:17 SkyScan query 03:31:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:31:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:18 Parameters OK 03:31:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:18 Set A/D data flow result=40 03:31:18 Set A/D channel type result=40 03:31:18 Set A/D encoding result=40 03:31:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:18 Set channel filter=0.000000e+000 result=40 03:31:18 Config A/D Result=40 03:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:18 Get A/D filter: -9.255963e+061 result=40 03:31:18 Get A/D value=-858993460 result=40 03:31:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:31:18 Parameters OK 03:31:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:31:18 Set A/D data flow result=40 03:31:18 Set A/D channel type result=40 03:31:18 Set A/D encoding result=40 03:31:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:31:18 Set channel filter=0.000000e+000 result=40 03:31:18 Config A/D Result=40 03:31:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:31:18 Get A/D filter: -9.255963e+061 result=40 03:31:18 Get A/D value=-858993460 result=40 03:31:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:31:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:31:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:31:18 Aux= 03:31:18 Message to Camera, serial 223 queued 03:32:01 Received message from Master: op=PointingHead serial=229 03:32:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:32:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:32:01 Point started: ret=0 03:32:01 point_skyscan result=0 03:32:02 Check angles 03:32:02 SkyScan query 03:32:03 SkyScan query done: ret=0 az=133.695<-8913 ze=35.235<-9651 Statuses=0009 0009 03:32:03 Msec=0 True Az=133.695 Ze=35.235 Az status=0009 Ze status=0009 03:32:03 Check angles 03:32:03 SkyScan query 03:32:03 SkyScan query done: ret=0 az=115.92<-7728 ze=13.86<-11076 Statuses=0009 0009 03:32:03 Msec=750 True Az=115.92 Ze=13.86 Az status=0009 Ze status=0009 03:32:04 Check angles 03:32:04 SkyScan query 03:32:04 SkyScan query done: ret=0 az=98.37<-6558 ze=-7.095<-12473 Statuses=0009 0009 03:32:04 Msec=1500 True Az=98.37 Ze=-7.095 Az status=0009 Ze status=0009 03:32:04 Check angles 03:32:04 SkyScan query 03:32:05 SkyScan query done: ret=0 az=80.595<-5373 ze=-28.5<-13900 Statuses=0009 0009 03:32:05 Msec=2250 True Az=80.595 Ze=-28.5 Az status=0009 Ze status=0009 03:32:05 Check angles 03:32:05 SkyScan query 03:32:06 SkyScan query done: ret=0 az=62.79<-4186 ze=-38.565<-14571 Statuses=0009 0008 03:32:06 Msec=3000 True Az=62.79 Ze=-38.565 Az status=0009 Ze status=0008 03:32:06 Check angles 03:32:06 SkyScan query 03:32:06 SkyScan query done: ret=0 az=44.97<-2998 ze=-38.52<-14568 Statuses=0009 0008 03:32:06 Msec=3750 True Az=44.97 Ze=-38.52 Az status=0009 Ze status=0008 03:32:07 Check angles 03:32:07 SkyScan query 03:32:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:32:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:32:07 Message to Master queued w/err=0: serial=229 error=0 [UTC 2018-12-4 03:32:09] 03:32:13 Received message from Master: op=Filter serial=230 03:32:13 Color wheel filter change from 0 to 0 03:32:13 FLIGetFilterPos err=0 currentPosition=0 03:32:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:32:13 Filter is already there-color wheel unchanged 03:32:18 Received message from Master: op=Shutter serial=231 03:32:18 Shutter LASER close 03:32:18 Received message from Camera: op=State serial=233 03:32:18 GetSingleValue result=40 Value=cccccccc 03:32:18 SkyScan query 03:32:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:32:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:19 Parameters OK 03:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:19 Set A/D data flow result=40 03:32:19 Set A/D channel type result=40 03:32:19 Set A/D encoding result=40 03:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:19 Set channel filter=0.000000e+000 result=40 03:32:19 Config A/D Result=40 03:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:19 Get A/D filter: -9.255963e+061 result=40 03:32:19 Get A/D value=-858993460 result=40 03:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:32:19 Parameters OK 03:32:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:32:19 Set A/D data flow result=40 03:32:19 Set A/D channel type result=40 03:32:19 Set A/D encoding result=40 03:32:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:32:19 Set channel filter=0.000000e+000 result=40 03:32:19 Config A/D Result=40 03:32:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:32:19 Get A/D filter: -9.255963e+061 result=40 03:32:19 Get A/D value=-858993460 result=40 03:32:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:32:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:32:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:32:19 Aux= 03:32:19 Message to Camera, serial 233 queued 03:33:00 Received message from Master: op=PointingHead serial=239 03:33:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:33:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:33:01 Point started: ret=0 03:33:01 point_skyscan result=0 03:33:02 Check angles 03:33:02 SkyScan query 03:33:02 SkyScan query done: ret=0 az=64.875<-4325 ze=-69.36<-16624 Statuses=0009 0009 03:33:02 Msec=0 True Az=64.875 Ze=-69.36 Az status=0009 Ze status=0009 03:33:02 Check angles 03:33:02 SkyScan query 03:33:03 SkyScan query done: ret=0 az=82.59<-5506 ze=-90.315<-18021 Statuses=0009 0009 03:33:03 Msec=750 True Az=82.59 Ze=-90.315 Az status=0009 Ze status=0009 03:33:03 Check angles 03:33:03 SkyScan query 03:33:04 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.27<-19418 Statuses=0009 0009 03:33:04 Msec=1500 True Az=99.855 Ze=-111.27 Az status=0009 Ze status=0009 03:33:04 Check angles 03:33:04 SkyScan query 03:33:04 SkyScan query done: ret=0 az=117.375<-7825 ze=-132.21<-20814 Statuses=0009 0009 03:33:04 Msec=2250 True Az=117.375 Ze=-132.21 Az status=0009 Ze status=0009 03:33:05 Check angles 03:33:05 SkyScan query 03:33:05 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 03:33:05 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 03:33:05 Check angles 03:33:05 SkyScan query 03:33:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:33:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:33:06 Message to Master queued w/err=0: serial=239 error=0 03:33:11 Received message from Master: op=Filter serial=240 03:33:11 Color wheel filter change from 0 to 0 03:33:11 FLIGetFilterPos err=0 currentPosition=0 03:33:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:33:11 Filter is already there-color wheel unchanged 03:33:16 Received message from Master: op=Shutter serial=241 03:33:16 Shutter LASER close 03:33:16 Received message from Camera: op=State serial=243 03:33:16 GetSingleValue result=40 Value=cccccccc 03:33:16 SkyScan query 03:33:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:33:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:16 Parameters OK 03:33:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:16 Set A/D data flow result=40 03:33:16 Set A/D channel type result=40 03:33:16 Set A/D encoding result=40 03:33:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:16 Set channel filter=0.000000e+000 result=40 03:33:17 Config A/D Result=40 03:33:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:17 Get A/D filter: -9.255963e+061 result=40 03:33:17 Get A/D value=-858993460 result=40 03:33:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:33:17 Parameters OK 03:33:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:33:17 Set A/D data flow result=40 03:33:17 Set A/D channel type result=40 03:33:17 Set A/D encoding result=40 03:33:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:33:17 Set channel filter=0.000000e+000 result=40 03:33:17 Config A/D Result=40 03:33:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:33:17 Get A/D filter: -9.255963e+061 result=40 03:33:17 Get A/D value=-858993460 result=40 03:33:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:33:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:33:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:33:17 Aux= 03:33:17 Message to Camera, serial 243 queued 03:33:58 Received message from Master: op=PointingHead serial=249 03:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:33:59 Point started: ret=0 03:33:59 point_skyscan result=0 03:33:59 Check angles 03:33:59 SkyScan query 03:34:00 SkyScan query done: ret=0 az=112.98<-7532 ze=-171.885<-23459 Statuses=0008 0009 03:34:00 Msec=0 True Az=112.98 Ze=-171.885 Az status=0008 Ze status=0009 03:34:00 Check angles 03:34:00 SkyScan query 03:34:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:34:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:34:01 Message to Master queued w/err=0: serial=249 error=0 03:34:06 Received message from Master: op=Filter serial=250 03:34:06 Color wheel filter change from 0 to 0 03:34:06 FLIGetFilterPos err=0 currentPosition=0 03:34:06 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:06 Filter is already there-color wheel unchanged 03:34:10 Received message from Master: op=Shutter serial=251 03:34:10 Shutter LASER open 03:34:11 Received message from Camera: op=State serial=253 03:34:11 GetSingleValue result=40 Value=cccccccc 03:34:11 SkyScan query 03:34:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:34:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:12 Parameters OK 03:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:12 Set A/D data flow result=40 03:34:12 Set A/D channel type result=40 03:34:12 Set A/D encoding result=40 03:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:12 Set channel filter=0.000000e+000 result=40 03:34:12 Config A/D Result=40 03:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:12 Get A/D filter: -9.255963e+061 result=40 03:34:12 Get A/D value=-858993460 result=40 03:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:12 Parameters OK 03:34:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:12 Set A/D data flow result=40 03:34:12 Set A/D channel type result=40 03:34:12 Set A/D encoding result=40 03:34:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:12 Set channel filter=0.000000e+000 result=40 03:34:12 Config A/D Result=40 03:34:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:12 Get A/D filter: -9.255963e+061 result=40 03:34:12 Get A/D value=-858993460 result=40 03:34:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:12 Aux= 03:34:12 Message to Camera, serial 253 queued 03:34:14 Received message from Master: op=Shutter serial=256 03:34:14 Shutter LASER close 03:34:32 Received message from Master: op=PointingHead serial=260 03:34:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:34:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:34:33 Point started: ret=0 03:34:33 point_skyscan result=0 03:34:33 Check angles 03:34:33 SkyScan query 03:34:34 SkyScan query done: ret=0 az=136.65<-9110 ze=-142.44<-21496 Statuses=0009 0009 03:34:34 Msec=0 True Az=136.65 Ze=-142.44 Az status=0009 Ze status=0009 03:34:34 Check angles 03:34:34 SkyScan query 03:34:35 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.485<-20099 Statuses=0009 0009 03:34:35 Msec=750 True Az=154.095 Ze=-121.485 Az status=0009 Ze status=0009 03:34:35 Check angles 03:34:35 SkyScan query 03:34:35 SkyScan query done: ret=0 az=171.93<-11462 ze=-100.065<-18671 Statuses=0009 0009 03:34:35 Msec=1500 True Az=171.93 Ze=-100.065 Az status=0009 Ze status=0009 03:34:36 Check angles 03:34:36 SkyScan query 03:34:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.11<-17274 Statuses=0008 0009 03:34:36 Msec=2250 True Az=176.01 Ze=-79.11 Az status=0008 Ze status=0009 03:34:36 Check angles 03:34:36 SkyScan query 03:34:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.14<-15876 Statuses=0008 0009 03:34:37 Msec=3000 True Az=175.995 Ze=-58.14 Az status=0008 Ze status=0009 03:34:37 Check angles 03:34:37 SkyScan query 03:34:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:34:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:34:38 Message to Master queued w/err=0: serial=260 error=0 03:34:43 Received message from Master: op=Filter serial=261 03:34:43 Color wheel filter change from 0 to 0 03:34:43 FLIGetFilterPos err=0 currentPosition=0 03:34:43 FLIGetStepsRemaining err=0 RemainingSteps=0 03:34:43 Filter is already there-color wheel unchanged 03:34:47 Received message from Master: op=Shutter serial=262 03:34:47 Shutter LASER close 03:34:48 Received message from Camera: op=State serial=264 03:34:48 GetSingleValue result=40 Value=cccccccc 03:34:48 SkyScan query 03:34:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:34:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:48 Parameters OK 03:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:48 Set A/D data flow result=40 03:34:48 Set A/D channel type result=40 03:34:48 Set A/D encoding result=40 03:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:48 Set channel filter=0.000000e+000 result=40 03:34:48 Config A/D Result=40 03:34:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:48 Get A/D filter: -9.255963e+061 result=40 03:34:48 Get A/D value=-858993460 result=40 03:34:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:34:48 Parameters OK 03:34:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:34:48 Set A/D data flow result=40 03:34:48 Set A/D channel type result=40 03:34:48 Set A/D encoding result=40 03:34:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:34:48 Set channel filter=0.000000e+000 result=40 03:34:48 Config A/D Result=40 03:34:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:34:49 Get A/D filter: -9.255963e+061 result=40 03:34:49 Get A/D value=-858993460 result=40 03:34:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:34:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:34:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:34:49 Aux= 03:34:49 Message to Camera, serial 264 queued 03:35:30 Received message from Master: op=PointingHead serial=270 03:35:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:35:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:35:30 Point started: ret=0 03:35:30 point_skyscan result=0 03:35:31 Check angles 03:35:31 SkyScan query 03:35:32 SkyScan query done: ret=0 az=152.1<-10140 ze=-20.7<-13380 Statuses=0009 0009 03:35:32 Msec=0 True Az=152.1 Ze=-20.7 Az status=0009 Ze status=0009 03:35:32 Check angles 03:35:32 SkyScan query 03:35:33 SkyScan query done: ret=0 az=134.205<-8947 ze=0.69<-11954 Statuses=0009 0009 03:35:33 Msec=750 True Az=134.205 Ze=0.69 Az status=0009 Ze status=0009 03:35:33 Check angles 03:35:33 SkyScan query 03:35:33 SkyScan query done: ret=0 az=116.43<-7762 ze=22.08<-10528 Statuses=0009 0009 03:35:33 Msec=1500 True Az=116.43 Ze=22.08 Az status=0009 Ze status=0009 03:35:33 Check angles 03:35:33 SkyScan query 03:35:34 SkyScan query done: ret=0 az=98.94<-6596 ze=43.035<-9131 Statuses=0009 0009 03:35:34 Msec=2250 True Az=98.94 Ze=43.035 Az status=0009 Ze status=0009 03:35:34 Check angles 03:35:34 SkyScan query 03:35:35 SkyScan query done: ret=0 az=85.98<-5732 ze=51.555<-8563 Statuses=0009 0008 03:35:35 Msec=3000 True Az=85.98 Ze=51.555 Az status=0009 Ze status=0008 03:35:35 Check angles 03:35:35 SkyScan query 03:35:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:35:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:35:36 Message to Master queued w/err=0: serial=270 error=0 03:35:41 Received message from Master: op=Filter serial=271 03:35:41 Color wheel filter change from 0 to 0 03:35:41 FLIGetFilterPos err=0 currentPosition=0 03:35:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:35:41 Filter is already there-color wheel unchanged 03:35:45 Received message from Master: op=Shutter serial=272 03:35:45 Shutter LASER close 03:35:45 Received message from Camera: op=State serial=274 03:35:45 GetSingleValue result=40 Value=cccccccc 03:35:45 SkyScan query 03:35:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:35:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:46 Parameters OK 03:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:46 Set A/D data flow result=40 03:35:46 Set A/D channel type result=40 03:35:46 Set A/D encoding result=40 03:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:46 Set channel filter=0.000000e+000 result=40 03:35:46 Config A/D Result=40 03:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:46 Get A/D filter: -9.255963e+061 result=40 03:35:46 Get A/D value=-858993460 result=40 03:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:35:46 Parameters OK 03:35:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:35:46 Set A/D data flow result=40 03:35:46 Set A/D channel type result=40 03:35:46 Set A/D encoding result=40 03:35:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:35:46 Set channel filter=0.000000e+000 result=40 03:35:46 Config A/D Result=40 03:35:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:35:46 Get A/D filter: -9.255963e+061 result=40 03:35:46 Get A/D value=-858993460 result=40 03:35:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:35:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:35:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:35:46 Aux= 03:35:46 Message to Camera, serial 274 queued 03:36:28 Received message from Master: op=PointingHead serial=280 03:36:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:36:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:36:28 Point started: ret=0 03:36:28 point_skyscan result=0 03:36:29 Check angles 03:36:29 SkyScan query 03:36:30 SkyScan query done: ret=0 az=110.04<-7336 ze=38.49<-9434 Statuses=0009 0008 03:36:30 Msec=0 True Az=110.04 Ze=38.49 Az status=0009 Ze status=0008 03:36:30 Check angles 03:36:30 SkyScan query 03:36:30 SkyScan query done: ret=0 az=127.41<-8494 ze=38.505<-9433 Statuses=0009 0008 03:36:30 Msec=750 True Az=127.41 Ze=38.505 Az status=0009 Ze status=0008 03:36:31 Check angles 03:36:31 SkyScan query 03:36:31 SkyScan query done: ret=0 az=144.855<-9657 ze=38.505<-9433 Statuses=0009 0008 03:36:31 Msec=1500 True Az=144.855 Ze=38.505 Az status=0009 Ze status=0008 03:36:31 Check angles 03:36:31 SkyScan query 03:36:32 SkyScan query done: ret=0 az=162.39<-10826 ze=38.505<-9433 Statuses=0009 0008 03:36:32 Msec=2250 True Az=162.39 Ze=38.505 Az status=0009 Ze status=0008 03:36:32 Check angles 03:36:32 SkyScan query 03:36:33 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:36:33 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:36:33 Check angles 03:36:33 SkyScan query 03:36:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:36:33 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 03:36:33 Message to Master queued w/err=0: serial=280 error=0 03:36:39 Received message from Master: op=Filter serial=281 03:36:39 Color wheel filter change from 0 to 0 03:36:39 FLIGetFilterPos err=0 currentPosition=0 03:36:39 FLIGetStepsRemaining err=0 RemainingSteps=0 03:36:39 Filter is already there-color wheel unchanged 03:36:43 Received message from Master: op=Shutter serial=282 03:36:43 Shutter LASER close 03:36:43 Received message from Camera: op=State serial=284 03:36:43 GetSingleValue result=40 Value=cccccccc 03:36:43 SkyScan query 03:36:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:36:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:44 Parameters OK 03:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:44 Set A/D data flow result=40 03:36:44 Set A/D channel type result=40 03:36:44 Set A/D encoding result=40 03:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:44 Set channel filter=0.000000e+000 result=40 03:36:44 Config A/D Result=40 03:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:44 Get A/D filter: -9.255963e+061 result=40 03:36:44 Get A/D value=-858993460 result=40 03:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:36:44 Parameters OK 03:36:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:36:44 Set A/D data flow result=40 03:36:44 Set A/D channel type result=40 03:36:44 Set A/D encoding result=40 03:36:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:36:44 Set channel filter=0.000000e+000 result=40 03:36:44 Config A/D Result=40 03:36:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:36:44 Get A/D filter: -9.255963e+061 result=40 03:36:44 Get A/D value=-858993460 result=40 03:36:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:36:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:36:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:36:44 Aux= 03:36:44 Message to Camera, serial 284 queued 03:37:18 Received message from Master: op=PointingHead serial=290 03:37:18 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:37:18 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:37:19 Point started: ret=0 03:37:19 point_skyscan result=0 03:37:19 Check angles 03:37:19 SkyScan query 03:37:20 SkyScan query done: ret=0 az=152.985<-10199 ze=8.685<-11421 Statuses=0009 0009 03:37:20 Msec=0 True Az=152.985 Ze=8.685 Az status=0009 Ze status=0009 03:37:20 Check angles 03:37:20 SkyScan query 03:37:21 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.705<-12847 Statuses=0009 0009 03:37:21 Msec=750 True Az=135.15 Ze=-12.705 Az status=0009 Ze status=0009 03:37:21 Check angles 03:37:21 SkyScan query 03:37:22 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.645<-14243 Statuses=0009 0009 03:37:22 Msec=1500 True Az=117.6 Ze=-33.645 Az status=0009 Ze status=0009 03:37:22 Check angles 03:37:22 SkyScan query 03:37:22 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.54<-15436 Statuses=0009 0009 03:37:22 Msec=2250 True Az=100.215 Ze=-51.54 Az status=0009 Ze status=0009 03:37:22 Check angles 03:37:22 SkyScan query 03:37:23 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 03:37:23 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 03:37:23 Check angles 03:37:23 SkyScan query 03:37:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:37:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:37:24 Message to Master queued w/err=0: serial=290 error=0 03:37:29 Received message from Master: op=Filter serial=291 03:37:29 Color wheel filter change from 0 to 0 03:37:29 FLIGetFilterPos err=0 currentPosition=0 03:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 03:37:29 Filter is already there-color wheel unchanged 03:37:29 Received message from Master: op=Shutter serial=292 03:37:29 Shutter LASER close 03:37:29 Received message from Camera: op=State serial=294 03:37:29 GetSingleValue result=40 Value=cccccccc 03:37:29 SkyScan query 03:37:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:30 Parameters OK 03:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:30 Set A/D data flow result=40 03:37:30 Set A/D channel type result=40 03:37:30 Set A/D encoding result=40 03:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:30 Set channel filter=0.000000e+000 result=40 03:37:30 Config A/D Result=40 03:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:30 Get A/D filter: -9.255963e+061 result=40 03:37:30 Get A/D value=-858993460 result=40 03:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:37:30 Parameters OK 03:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:37:30 Set A/D data flow result=40 03:37:30 Set A/D channel type result=40 03:37:30 Set A/D encoding result=40 03:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:37:30 Set channel filter=0.000000e+000 result=40 03:37:30 Config A/D Result=40 03:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:37:30 Get A/D filter: -9.255963e+061 result=40 03:37:30 Get A/D value=-858993460 result=40 03:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:37:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:37:30 Aux= 03:37:30 Message to Camera, serial 294 queued 03:38:01 Received message from Master: op=PointingHead serial=301 03:38:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:38:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:38:02 Point started: ret=0 03:38:02 point_skyscan result=0 03:38:02 Check angles 03:38:02 SkyScan query 03:38:03 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.27<-17418 Statuses=0009 0009 03:38:03 Msec=0 True Az=108.9 Ze=-81.27 Az status=0009 Ze status=0009 03:38:03 Check angles 03:38:03 SkyScan query 03:38:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.66<-18844 Statuses=0008 0009 03:38:04 Msec=750 True Az=113.01 Ze=-102.66 Az status=0008 Ze status=0009 03:38:04 Check angles 03:38:04 SkyScan query 03:38:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.615<-20241 Statuses=0008 0009 03:38:04 Msec=1500 True Az=113.01 Ze=-123.615 Az status=0008 Ze status=0009 03:38:05 Check angles 03:38:05 SkyScan query 03:38:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 03:38:05 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 03:38:05 Check angles 03:38:05 SkyScan query 03:38:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 03:38:06 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 03:38:06 Check angles 03:38:06 SkyScan query 03:38:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:38:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:38:07 Message to Master queued w/err=0: serial=301 error=0 03:38:12 Received message from Master: op=Filter serial=302 03:38:12 Color wheel filter change from 0 to 0 03:38:12 FLIGetFilterPos err=0 currentPosition=0 03:38:12 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:12 Filter is already there-color wheel unchanged 03:38:12 Received message from Master: op=Shutter serial=303 03:38:12 Shutter LASER open 03:38:12 Received message from Camera: op=State serial=305 03:38:12 GetSingleValue result=40 Value=cccccccc 03:38:12 SkyScan query 03:38:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:38:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:13 Parameters OK 03:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:13 Set A/D data flow result=40 03:38:13 Set A/D channel type result=40 03:38:13 Set A/D encoding result=40 03:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:13 Set channel filter=0.000000e+000 result=40 03:38:13 Config A/D Result=40 03:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:13 Get A/D filter: -9.255963e+061 result=40 03:38:13 Get A/D value=-858993460 result=40 03:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:13 Parameters OK 03:38:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:13 Set A/D data flow result=40 03:38:13 Set A/D channel type result=40 03:38:13 Set A/D encoding result=40 03:38:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:13 Set channel filter=0.000000e+000 result=40 03:38:13 Config A/D Result=40 03:38:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:13 Get A/D filter: -9.255963e+061 result=40 03:38:13 Get A/D value=-858993460 result=40 03:38:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:13 Aux= 03:38:13 Message to Camera, serial 305 queued 03:38:15 Received message from Master: op=Shutter serial=309 03:38:15 Shutter LASER close 03:38:16 Received message from Master: op=PointingHead serial=313 03:38:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:38:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:38:17 Point started: ret=0 03:38:17 point_skyscan result=0 03:38:17 Check angles 03:38:17 SkyScan query 03:38:18 SkyScan query done: ret=0 az=89.94<-5996 ze=157.35<-1510 Statuses=0009 0009 03:38:18 Msec=0 True Az=89.94 Ze=157.35 Az status=0009 Ze status=0009 03:38:18 Check angles 03:38:18 SkyScan query 03:38:19 SkyScan query done: ret=0 az=72.615<-4841 ze=136.395<-2907 Statuses=0009 0009 03:38:19 Msec=750 True Az=72.615 Ze=136.395 Az status=0009 Ze status=0009 03:38:19 Check angles 03:38:19 SkyScan query 03:38:19 SkyScan query done: ret=0 az=54.93<-3662 ze=115.425<-4305 Statuses=0009 0009 03:38:19 Msec=1500 True Az=54.93 Ze=115.425 Az status=0009 Ze status=0009 03:38:20 Check angles 03:38:20 SkyScan query 03:38:20 SkyScan query done: ret=0 az=40.89<-2726 ze=94.455<-5703 Statuses=0009 0009 03:38:20 Msec=2250 True Az=40.89 Ze=94.455 Az status=0009 Ze status=0009 03:38:20 Check angles 03:38:20 SkyScan query 03:38:21 SkyScan query done: ret=0 az=40.995<-2733 ze=73.53<-7098 Statuses=0008 0009 03:38:21 Msec=3000 True Az=40.995 Ze=73.53 Az status=0008 Ze status=0009 03:38:21 Check angles 03:38:21 SkyScan query 03:38:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 03:38:22 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 03:38:22 Check angles 03:38:22 SkyScan query 03:38:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:38:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:38:22 Message to Master queued w/err=0: serial=313 error=0 03:38:28 Received message from Master: op=Filter serial=314 03:38:28 Color wheel filter change from 0 to 0 03:38:28 FLIGetFilterPos err=0 currentPosition=0 03:38:28 FLIGetStepsRemaining err=0 RemainingSteps=0 03:38:28 Filter is already there-color wheel unchanged 03:38:28 Received message from Master: op=Shutter serial=315 03:38:28 Shutter LASER close 03:38:28 Received message from Camera: op=State serial=317 03:38:28 GetSingleValue result=40 Value=cccccccc 03:38:28 SkyScan query 03:38:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:38:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:29 Parameters OK 03:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:29 Set A/D data flow result=40 03:38:29 Set A/D channel type result=40 03:38:29 Set A/D encoding result=40 03:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:29 Set channel filter=0.000000e+000 result=40 03:38:29 Config A/D Result=40 03:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:29 Get A/D filter: -9.255963e+061 result=40 03:38:29 Get A/D value=-858993460 result=40 03:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:38:29 Parameters OK 03:38:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:38:29 Set A/D data flow result=40 03:38:29 Set A/D channel type result=40 03:38:29 Set A/D encoding result=40 03:38:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:38:29 Set channel filter=0.000000e+000 result=40 03:38:29 Config A/D Result=40 03:38:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:38:29 Get A/D filter: -9.255963e+061 result=40 03:38:29 Get A/D value=-858993460 result=40 03:38:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:38:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:38:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:38:29 Aux= 03:38:29 Message to Camera, serial 317 queued 03:39:00 Received message from Master: op=PointingHead serial=324 03:39:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:39:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:39:00 Point started: ret=0 03:39:00 point_skyscan result=0 03:39:01 Check angles 03:39:01 SkyScan query 03:39:02 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 03:39:02 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 03:39:02 Check angles 03:39:02 SkyScan query 03:39:02 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 03:39:02 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 03:39:03 Check angles 03:39:03 SkyScan query 03:39:03 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 03:39:03 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 03:39:03 Check angles 03:39:03 SkyScan query 03:39:04 SkyScan query done: ret=0 az=116.775<-7785 ze=66.495<-7567 Statuses=0009 0008 03:39:04 Msec=2250 True Az=116.775 Ze=66.495 Az status=0009 Ze status=0008 03:39:04 Check angles 03:39:04 SkyScan query 03:39:05 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 03:39:05 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 03:39:05 Check angles 03:39:05 SkyScan query 03:39:05 SkyScan query done: ret=0 az=151.53<-10102 ze=66.495<-7567 Statuses=0009 0008 03:39:05 Msec=3750 True Az=151.53 Ze=66.495 Az status=0009 Ze status=0008 03:39:06 Check angles 03:39:06 SkyScan query 03:39:06 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 03:39:06 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 03:39:06 Message to Master queued w/err=0: serial=324 error=0 03:39:11 Received message from Master: op=Filter serial=325 03:39:11 Color wheel filter change from 0 to 0 03:39:11 FLIGetFilterPos err=0 currentPosition=0 03:39:11 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:11 Filter is already there-color wheel unchanged 03:39:12 Received message from Master: op=Shutter serial=326 03:39:12 Shutter LASER close 03:39:12 Received message from Camera: op=State serial=328 03:39:12 GetSingleValue result=40 Value=cccccccc 03:39:12 SkyScan query 03:39:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:39:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:12 Parameters OK 03:39:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:12 Set A/D data flow result=40 03:39:12 Set A/D channel type result=40 03:39:12 Set A/D encoding result=40 03:39:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:12 Set channel filter=0.000000e+000 result=40 03:39:12 Config A/D Result=40 03:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:12 Get A/D filter: -9.255963e+061 result=40 03:39:12 Get A/D value=-858993460 result=40 03:39:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:12 Parameters OK 03:39:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:12 Set A/D data flow result=40 03:39:12 Set A/D channel type result=40 03:39:12 Set A/D encoding result=40 03:39:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:12 Set channel filter=0.000000e+000 result=40 03:39:12 Config A/D Result=40 03:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:12 Get A/D filter: -9.255963e+061 result=40 03:39:12 Get A/D value=-858993460 result=40 03:39:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:12 Aux= 03:39:12 Message to Camera, serial 328 queued 03:39:44 Received message from Master: op=PointingHead serial=335 03:39:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:39:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:39:44 Point started: ret=0 03:39:44 point_skyscan result=0 03:39:45 Check angles 03:39:45 SkyScan query 03:39:45 SkyScan query done: ret=0 az=134.865<-8991 ze=36.615<-9559 Statuses=0009 0009 03:39:45 Msec=0 True Az=134.865 Ze=36.615 Az status=0009 Ze status=0009 03:39:45 Check angles 03:39:45 SkyScan query 03:39:46 SkyScan query done: ret=0 az=117.105<-7807 ze=15.225<-10985 Statuses=0009 0009 03:39:46 Msec=750 True Az=117.105 Ze=15.225 Az status=0009 Ze status=0009 03:39:46 Check angles 03:39:46 SkyScan query 03:39:47 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.73<-12382 Statuses=0009 0009 03:39:47 Msec=1500 True Az=99.69 Ze=-5.73 Az status=0009 Ze status=0009 03:39:47 Check angles 03:39:47 SkyScan query 03:39:47 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.12<-13808 Statuses=0009 0009 03:39:47 Msec=2250 True Az=81.825 Ze=-27.12 Az status=0009 Ze status=0009 03:39:48 Check angles 03:39:48 SkyScan query 03:39:48 SkyScan query done: ret=0 az=64.41<-4294 ze=-38.55<-14570 Statuses=0009 0008 03:39:48 Msec=3000 True Az=64.41 Ze=-38.55 Az status=0009 Ze status=0008 03:39:48 Check angles 03:39:48 SkyScan query 03:39:49 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.535<-14569 Statuses=0009 0008 03:39:49 Msec=3750 True Az=46.83 Ze=-38.535 Az status=0009 Ze status=0008 03:39:49 Check angles 03:39:49 SkyScan query 03:39:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:39:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:39:50 Message to Master queued w/err=0: serial=335 error=0 03:39:55 Received message from Master: op=Filter serial=336 03:39:55 Color wheel filter change from 0 to 0 03:39:55 FLIGetFilterPos err=0 currentPosition=0 03:39:55 FLIGetStepsRemaining err=0 RemainingSteps=0 03:39:55 Filter is already there-color wheel unchanged 03:39:55 Received message from Master: op=Shutter serial=337 03:39:55 Shutter LASER close 03:39:55 Received message from Camera: op=State serial=339 03:39:55 GetSingleValue result=40 Value=cccccccc 03:39:55 SkyScan query 03:39:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:39:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:56 Parameters OK 03:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:56 Set A/D data flow result=40 03:39:56 Set A/D channel type result=40 03:39:56 Set A/D encoding result=40 03:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:56 Set channel filter=0.000000e+000 result=40 03:39:56 Config A/D Result=40 03:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:56 Get A/D filter: -9.255963e+061 result=40 03:39:56 Get A/D value=-858993460 result=40 03:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:39:56 Parameters OK 03:39:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:39:56 Set A/D data flow result=40 03:39:56 Set A/D channel type result=40 03:39:56 Set A/D encoding result=40 03:39:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:39:56 Set channel filter=0.000000e+000 result=40 03:39:56 Config A/D Result=40 03:39:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:39:56 Get A/D filter: -9.255963e+061 result=40 03:39:56 Get A/D value=-858993460 result=40 03:39:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:39:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:39:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:39:56 Aux= 03:39:56 Message to Camera, serial 339 queued 03:40:27 Received message from Master: op=PointingHead serial=346 03:40:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:40:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:40:28 Point started: ret=0 03:40:28 point_skyscan result=0 03:40:28 Check angles 03:40:28 SkyScan query 03:40:29 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.205<-16547 Statuses=0009 0009 03:40:29 Msec=0 True Az=63.795 Ze=-68.205 Az status=0009 Ze status=0009 03:40:29 Check angles 03:40:29 SkyScan query 03:40:30 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.16<-17944 Statuses=0009 0009 03:40:30 Msec=750 True Az=81.435 Ze=-89.16 Az status=0009 Ze status=0009 03:40:30 Check angles 03:40:30 SkyScan query 03:40:30 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.1<-19340 Statuses=0009 0009 03:40:30 Msec=1500 True Az=98.94 Ze=-110.1 Az status=0009 Ze status=0009 03:40:31 Check angles 03:40:31 SkyScan query 03:40:31 SkyScan query done: ret=0 az=116.31<-7754 ze=-131.07<-20738 Statuses=0009 0009 03:40:31 Msec=2250 True Az=116.31 Ze=-131.07 Az status=0009 Ze status=0009 03:40:31 Check angles 03:40:31 SkyScan query 03:40:32 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 03:40:32 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 03:40:32 Check angles 03:40:32 SkyScan query 03:40:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:40:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:40:33 Message to Master queued w/err=0: serial=346 error=0 03:40:38 Received message from Master: op=Filter serial=347 03:40:38 Color wheel filter change from 0 to 0 03:40:38 FLIGetFilterPos err=0 currentPosition=0 03:40:38 FLIGetStepsRemaining err=0 RemainingSteps=0 03:40:38 Filter is already there-color wheel unchanged 03:40:38 Received message from Master: op=Shutter serial=348 03:40:38 Shutter LASER close 03:40:38 Received message from Camera: op=State serial=350 03:40:38 GetSingleValue result=40 Value=cccccccc 03:40:38 SkyScan query 03:40:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:40:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:39 Parameters OK 03:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:39 Set A/D data flow result=40 03:40:39 Set A/D channel type result=40 03:40:39 Set A/D encoding result=40 03:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:39 Set channel filter=0.000000e+000 result=40 03:40:39 Config A/D Result=40 03:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:39 Get A/D filter: -9.255963e+061 result=40 03:40:39 Get A/D value=-858993460 result=40 03:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:40:39 Parameters OK 03:40:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:40:39 Set A/D data flow result=40 03:40:39 Set A/D channel type result=40 03:40:39 Set A/D encoding result=40 03:40:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:40:39 Set channel filter=0.000000e+000 result=40 03:40:39 Config A/D Result=40 03:40:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:40:39 Get A/D filter: -9.255963e+061 result=40 03:40:39 Get A/D value=-858993460 result=40 03:40:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:40:39 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:40:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:40:39 Aux= 03:40:39 Message to Camera, serial 350 queued 03:41:10 Received message from Master: op=PointingHead serial=357 03:41:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:41:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:41:10 Point started: ret=0 03:41:10 point_skyscan result=0 03:41:11 Check angles 03:41:11 SkyScan query 03:41:12 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.075<-23405 Statuses=0009 0009 03:41:12 Msec=0 True Az=113.025 Ze=-171.075 Az status=0009 Ze status=0009 03:41:12 Check angles 03:41:12 SkyScan query 03:41:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:41:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:41:12 Message to Master queued w/err=0: serial=357 error=0 03:41:18 Received message from Master: op=Filter serial=358 03:41:18 Color wheel filter change from 0 to 0 03:41:18 FLIGetFilterPos err=0 currentPosition=0 03:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:18 Filter is already there-color wheel unchanged 03:41:18 Received message from Master: op=Shutter serial=359 03:41:18 Shutter LASER open 03:41:18 Received message from Camera: op=State serial=361 03:41:18 GetSingleValue result=40 Value=cccccccc 03:41:18 SkyScan query 03:41:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:19 Parameters OK 03:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:19 Set A/D data flow result=40 03:41:19 Set A/D channel type result=40 03:41:19 Set A/D encoding result=40 03:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:19 Set channel filter=0.000000e+000 result=40 03:41:19 Config A/D Result=40 03:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:19 Get A/D filter: -9.255963e+061 result=40 03:41:19 Get A/D value=-858993460 result=40 03:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:19 Parameters OK 03:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:19 Set A/D data flow result=40 03:41:19 Set A/D channel type result=40 03:41:19 Set A/D encoding result=40 03:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:19 Set channel filter=0.000000e+000 result=40 03:41:19 Config A/D Result=40 03:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:19 Get A/D filter: -9.255963e+061 result=40 03:41:19 Get A/D value=-858993460 result=40 03:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:19 Aux= 03:41:19 Message to Camera, serial 361 queued 03:41:21 Received message from Master: op=Shutter serial=365 03:41:21 Shutter LASER close 03:41:22 Received message from Master: op=PointingHead serial=369 03:41:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:41:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:41:23 Point started: ret=0 03:41:23 point_skyscan result=0 03:41:24 Check angles 03:41:24 SkyScan query 03:41:24 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.295<-21553 Statuses=0009 0009 03:41:24 Msec=0 True Az=135.825 Ze=-143.295 Az status=0009 Ze status=0009 03:41:24 Check angles 03:41:24 SkyScan query 03:41:25 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.935<-20129 Statuses=0009 0009 03:41:25 Msec=750 True Az=153.72 Ze=-121.935 Az status=0009 Ze status=0009 03:41:25 Check angles 03:41:25 SkyScan query 03:41:26 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.01<-18734 Statuses=0009 0009 03:41:26 Msec=1500 True Az=171.21 Ze=-101.01 Az status=0009 Ze status=0009 03:41:26 Check angles 03:41:26 SkyScan query 03:41:26 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 03:41:26 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 03:41:27 Check angles 03:41:27 SkyScan query 03:41:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 03:41:27 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 03:41:27 Check angles 03:41:27 SkyScan query 03:41:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:41:28 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:41:28 Message to Master queued w/err=0: serial=369 error=0 03:41:33 Received message from Master: op=Filter serial=370 03:41:33 Color wheel filter change from 0 to 0 03:41:33 FLIGetFilterPos err=0 currentPosition=0 03:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:41:33 Filter is already there-color wheel unchanged 03:41:33 Received message from Master: op=Shutter serial=371 03:41:33 Shutter LASER close 03:41:34 Received message from Camera: op=State serial=373 03:41:34 GetSingleValue result=40 Value=cccccccc 03:41:34 SkyScan query 03:41:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:34 Parameters OK 03:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:34 Set A/D data flow result=40 03:41:34 Set A/D channel type result=40 03:41:34 Set A/D encoding result=40 03:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:34 Set channel filter=0.000000e+000 result=40 03:41:34 Config A/D Result=40 03:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:34 Get A/D filter: -9.255963e+061 result=40 03:41:34 Get A/D value=-858993460 result=40 03:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:41:34 Parameters OK 03:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:41:34 Set A/D data flow result=40 03:41:34 Set A/D channel type result=40 03:41:34 Set A/D encoding result=40 03:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:41:34 Set channel filter=0.000000e+000 result=40 03:41:34 Config A/D Result=40 03:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:41:34 Get A/D filter: -9.255963e+061 result=40 03:41:34 Get A/D value=-858993460 result=40 03:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:41:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:41:34 Aux= 03:41:34 Message to Camera, serial 373 queued 03:42:05 Received message from Master: op=PointingHead serial=380 03:42:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:42:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:42:06 Point started: ret=0 03:42:06 point_skyscan result=0 03:42:07 Check angles 03:42:07 SkyScan query 03:42:07 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.66<-13444 Statuses=0009 0009 03:42:07 Msec=0 True Az=152.97 Ze=-21.66 Az status=0009 Ze status=0009 03:42:07 Check angles 03:42:07 SkyScan query 03:42:08 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.69<-12046 Statuses=0009 0009 03:42:08 Msec=750 True Az=135.435 Ze=-0.69 Az status=0009 Ze status=0009 03:42:08 Check angles 03:42:08 SkyScan query 03:42:09 SkyScan query done: ret=0 az=118.005<-7867 ze=20.25<-10650 Statuses=0009 0009 03:42:09 Msec=1500 True Az=118.005 Ze=20.25 Az status=0009 Ze status=0009 03:42:09 Check angles 03:42:09 SkyScan query 03:42:09 SkyScan query done: ret=0 az=100.215<-6681 ze=41.625<-9225 Statuses=0009 0009 03:42:09 Msec=2250 True Az=100.215 Ze=41.625 Az status=0009 Ze status=0009 03:42:10 Check angles 03:42:10 SkyScan query 03:42:10 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 03:42:10 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 03:42:10 Check angles 03:42:10 SkyScan query 03:42:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:42:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:42:11 Message to Master queued w/err=0: serial=380 error=0 03:42:16 Received message from Master: op=Filter serial=381 03:42:16 Color wheel filter change from 0 to 0 03:42:16 FLIGetFilterPos err=0 currentPosition=0 03:42:16 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:16 Filter is already there-color wheel unchanged 03:42:16 Received message from Master: op=Shutter serial=382 03:42:16 Shutter LASER close 03:42:16 Received message from Camera: op=State serial=384 03:42:16 GetSingleValue result=40 Value=cccccccc 03:42:16 SkyScan query 03:42:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:42:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:17 Parameters OK 03:42:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:17 Set A/D data flow result=40 03:42:17 Set A/D channel type result=40 03:42:17 Set A/D encoding result=40 03:42:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:17 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-4 03:42:17] 03:42:17 Config A/D Result=40 03:42:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:17 Get A/D filter: -9.255963e+061 result=40 03:42:17 Get A/D value=-858993460 result=40 03:42:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:42:17 Parameters OK 03:42:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:42:17 Set A/D data flow result=40 03:42:17 Set A/D channel type result=40 03:42:17 Set A/D encoding result=40 03:42:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:42:17 Set channel filter=0.000000e+000 result=40 03:42:17 Config A/D Result=40 03:42:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:42:17 Get A/D filter: -9.255963e+061 result=40 03:42:17 Get A/D value=-858993460 result=40 03:42:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:42:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:42:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:42:17 Aux= 03:42:17 Message to Camera, serial 384 queued 03:42:48 Received message from Master: op=PointingHead serial=391 03:42:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:42:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:42:49 Point started: ret=0 03:42:49 point_skyscan result=0 03:42:49 Check angles 03:42:49 SkyScan query 03:42:50 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 03:42:50 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 03:42:50 Check angles 03:42:50 SkyScan query 03:42:51 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 03:42:51 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 03:42:51 Check angles 03:42:51 SkyScan query 03:42:51 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 03:42:51 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 03:42:52 Check angles 03:42:52 SkyScan query 03:42:52 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 03:42:52 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 03:42:52 Check angles 03:42:52 SkyScan query 03:42:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 03:42:53 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 03:42:53 Check angles 03:42:53 SkyScan query 03:42:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:42:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:42:54 Message to Master queued w/err=0: serial=391 error=0 03:42:59 Received message from Master: op=Filter serial=392 03:42:59 Color wheel filter change from 0 to 0 03:42:59 FLIGetFilterPos err=0 currentPosition=0 03:42:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:42:59 Filter is already there-color wheel unchanged 03:42:59 Received message from Master: op=Shutter serial=393 03:42:59 Shutter LASER close 03:42:59 Received message from Camera: op=State serial=395 03:42:59 GetSingleValue result=40 Value=cccccccc 03:42:59 SkyScan query 03:43:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:43:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:00 Parameters OK 03:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:00 Set A/D data flow result=40 03:43:00 Set A/D channel type result=40 03:43:00 Set A/D encoding result=40 03:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:00 Set channel filter=0.000000e+000 result=40 03:43:00 Config A/D Result=40 03:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:00 Get A/D filter: -9.255963e+061 result=40 03:43:00 Get A/D value=-858993460 result=40 03:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:00 Parameters OK 03:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:00 Set A/D data flow result=40 03:43:00 Set A/D channel type result=40 03:43:00 Set A/D encoding result=40 03:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:00 Set channel filter=0.000000e+000 result=40 03:43:00 Config A/D Result=40 03:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:00 Get A/D filter: -9.255963e+061 result=40 03:43:00 Get A/D value=-858993460 result=40 03:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:00 Aux= 03:43:00 Message to Camera, serial 395 queued 03:43:31 Received message from Master: op=PointingHead serial=402 03:43:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:43:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:43:31 Point started: ret=0 03:43:31 point_skyscan result=0 03:43:32 Check angles 03:43:32 SkyScan query 03:43:33 SkyScan query done: ret=0 az=152.79<-10186 ze=8.415<-11439 Statuses=0009 0009 03:43:33 Msec=0 True Az=152.79 Ze=8.415 Az status=0009 Ze status=0009 03:43:33 Check angles 03:43:33 SkyScan query 03:43:34 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.54<-12836 Statuses=0009 0009 03:43:34 Msec=750 True Az=135.345 Ze=-12.54 Az status=0009 Ze status=0009 03:43:34 Check angles 03:43:34 SkyScan query 03:43:34 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.495<-14233 Statuses=0009 0009 03:43:34 Msec=1500 True Az=117.81 Ze=-33.495 Az status=0009 Ze status=0009 03:43:34 Check angles 03:43:34 SkyScan query 03:43:35 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 03:43:35 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 03:43:35 Check angles 03:43:35 SkyScan query 03:43:36 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 03:43:36 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 03:43:36 Check angles 03:43:36 SkyScan query 03:43:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:43:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:43:37 Message to Master queued w/err=0: serial=402 error=0 03:43:42 Received message from Master: op=Filter serial=403 03:43:42 Color wheel filter change from 0 to 0 03:43:42 FLIGetFilterPos err=0 currentPosition=0 03:43:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:43:42 Filter is already there-color wheel unchanged 03:43:42 Received message from Master: op=Shutter serial=404 03:43:42 Shutter LASER close 03:43:42 Received message from Camera: op=State serial=406 03:43:42 GetSingleValue result=40 Value=cccccccc 03:43:42 SkyScan query 03:43:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:43:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:43 Parameters OK 03:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:43 Set A/D data flow result=40 03:43:43 Set A/D channel type result=40 03:43:43 Set A/D encoding result=40 03:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:43 Set channel filter=0.000000e+000 result=40 03:43:43 Config A/D Result=40 03:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:43 Get A/D filter: -9.255963e+061 result=40 03:43:43 Get A/D value=-858993460 result=40 03:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:43:43 Parameters OK 03:43:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:43:43 Set A/D data flow result=40 03:43:43 Set A/D channel type result=40 03:43:43 Set A/D encoding result=40 03:43:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:43:43 Set channel filter=0.000000e+000 result=40 03:43:43 Config A/D Result=40 03:43:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:43:43 Get A/D filter: -9.255963e+061 result=40 03:43:43 Get A/D value=-858993460 result=40 03:43:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:43:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:43:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:43:43 Aux= 03:43:43 Message to Camera, serial 406 queued 03:44:14 Received message from Master: op=PointingHead serial=413 03:44:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:44:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:44:14 Point started: ret=0 03:44:14 point_skyscan result=0 03:44:15 Check angles 03:44:15 SkyScan query 03:44:16 SkyScan query done: ret=0 az=108.87<-7258 ze=-81.18<-17412 Statuses=0009 0009 03:44:16 Msec=0 True Az=108.87 Ze=-81.18 Az status=0009 Ze status=0009 03:44:16 Check angles 03:44:16 SkyScan query 03:44:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.135<-18809 Statuses=0008 0009 03:44:16 Msec=750 True Az=113.01 Ze=-102.135 Az status=0008 Ze status=0009 03:44:17 Check angles 03:44:17 SkyScan query 03:44:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.525<-20235 Statuses=0008 0009 03:44:17 Msec=1500 True Az=113.01 Ze=-123.525 Az status=0008 Ze status=0009 03:44:17 Check angles 03:44:17 SkyScan query 03:44:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.465<-21631 Statuses=0008 0009 03:44:18 Msec=2250 True Az=112.995 Ze=-144.465 Az status=0008 Ze status=0009 03:44:18 Check angles 03:44:18 SkyScan query 03:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.435<-23029 Statuses=0008 0009 03:44:19 Msec=3000 True Az=112.995 Ze=-165.435 Az status=0008 Ze status=0009 03:44:19 Check angles 03:44:19 SkyScan query 03:44:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:44:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:44:19 Message to Master queued w/err=0: serial=413 error=0 03:44:24 Received message from Master: op=Filter serial=414 03:44:24 Color wheel filter change from 0 to 0 03:44:24 FLIGetFilterPos err=0 currentPosition=0 03:44:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:24 Filter is already there-color wheel unchanged 03:44:25 Received message from Master: op=Shutter serial=415 03:44:25 Shutter LASER open 03:44:25 Received message from Camera: op=State serial=417 03:44:25 GetSingleValue result=40 Value=cccccccc 03:44:25 SkyScan query 03:44:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:44:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:26 Parameters OK 03:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:26 Set A/D data flow result=40 03:44:26 Set A/D channel type result=40 03:44:26 Set A/D encoding result=40 03:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:26 Set channel filter=0.000000e+000 result=40 03:44:26 Config A/D Result=40 03:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:26 Get A/D filter: -9.255963e+061 result=40 03:44:26 Get A/D value=-858993460 result=40 03:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:26 Parameters OK 03:44:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:26 Set A/D data flow result=40 03:44:26 Set A/D channel type result=40 03:44:26 Set A/D encoding result=40 03:44:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:26 Set channel filter=0.000000e+000 result=40 03:44:26 Config A/D Result=40 03:44:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:26 Get A/D filter: -9.255963e+061 result=40 03:44:26 Get A/D value=-858993460 result=40 03:44:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:26 Aux= 03:44:26 Message to Camera, serial 417 queued 03:44:28 Received message from Master: op=Shutter serial=421 03:44:28 Shutter LASER close 03:44:29 Received message from Master: op=PointingHead serial=425 03:44:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:44:29 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:44:29 Point started: ret=0 03:44:29 point_skyscan result=0 03:44:30 Check angles 03:44:30 SkyScan query 03:44:31 SkyScan query done: ret=0 az=90.255<-6017 ze=157.47<-1502 Statuses=0009 0009 03:44:31 Msec=0 True Az=90.255 Ze=157.47 Az status=0009 Ze status=0009 03:44:31 Check angles 03:44:31 SkyScan query 03:44:31 SkyScan query done: ret=0 az=72.795<-4853 ze=136.545<-2897 Statuses=0009 0009 03:44:31 Msec=750 True Az=72.795 Ze=136.545 Az status=0009 Ze status=0009 03:44:32 Check angles 03:44:32 SkyScan query 03:44:32 SkyScan query done: ret=0 az=55.17<-3678 ze=115.575<-4295 Statuses=0009 0009 03:44:32 Msec=1500 True Az=55.17 Ze=115.575 Az status=0009 Ze status=0009 03:44:32 Check angles 03:44:32 SkyScan query 03:44:33 SkyScan query done: ret=0 az=40.89<-2726 ze=94.62<-5692 Statuses=0009 0009 03:44:33 Msec=2250 True Az=40.89 Ze=94.62 Az status=0009 Ze status=0009 03:44:33 Check angles 03:44:33 SkyScan query 03:44:34 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 03:44:34 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 03:44:34 Check angles 03:44:34 SkyScan query 03:44:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 03:44:34 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 03:44:35 Check angles 03:44:35 SkyScan query 03:44:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:44:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:44:35 Message to Master queued w/err=0: serial=425 error=0 03:44:40 Received message from Master: op=Filter serial=426 03:44:40 Color wheel filter change from 0 to 0 03:44:40 FLIGetFilterPos err=0 currentPosition=0 03:44:40 FLIGetStepsRemaining err=0 RemainingSteps=0 03:44:40 Filter is already there-color wheel unchanged 03:44:41 Received message from Master: op=Shutter serial=427 03:44:41 Shutter LASER close 03:44:41 Received message from Camera: op=State serial=429 03:44:41 GetSingleValue result=40 Value=cccccccc 03:44:41 SkyScan query 03:44:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:44:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:41 Parameters OK 03:44:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:41 Set A/D data flow result=40 03:44:41 Set A/D channel type result=40 03:44:41 Set A/D encoding result=40 03:44:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:41 Set channel filter=0.000000e+000 result=40 03:44:41 Config A/D Result=40 03:44:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:41 Get A/D filter: -9.255963e+061 result=40 03:44:41 Get A/D value=-858993460 result=40 03:44:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:44:41 Parameters OK 03:44:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:44:41 Set A/D data flow result=40 03:44:41 Set A/D channel type result=40 03:44:41 Set A/D encoding result=40 03:44:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:44:41 Set channel filter=0.000000e+000 result=40 03:44:41 Config A/D Result=40 03:44:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:44:41 Get A/D filter: -9.255963e+061 result=40 03:44:41 Get A/D value=-858993460 result=40 03:44:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:44:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:44:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:44:41 Aux= 03:44:41 Message to Camera, serial 429 queued 03:45:13 Received message from Master: op=PointingHead serial=436 03:45:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:45:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:45:13 Point started: ret=0 03:45:13 point_skyscan result=0 03:45:14 Check angles 03:45:14 SkyScan query 03:45:14 SkyScan query done: ret=0 az=63.93<-4262 ze=66.54<-7564 Statuses=0009 0008 03:45:14 Msec=0 True Az=63.93 Ze=66.54 Az status=0009 Ze status=0008 03:45:15 Check angles 03:45:15 SkyScan query 03:45:15 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 03:45:15 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 03:45:15 Check angles 03:45:15 SkyScan query 03:45:16 SkyScan query done: ret=0 az=99.36<-6624 ze=66.495<-7567 Statuses=0009 0008 03:45:16 Msec=1500 True Az=99.36 Ze=66.495 Az status=0009 Ze status=0008 03:45:16 Check angles 03:45:16 SkyScan query 03:45:17 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 03:45:17 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 03:45:17 Check angles 03:45:17 SkyScan query 03:45:17 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 03:45:17 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 03:45:18 Check angles 03:45:18 SkyScan query 03:45:18 SkyScan query done: ret=0 az=151.62<-10108 ze=66.495<-7567 Statuses=0009 0008 03:45:18 Msec=3750 True Az=151.62 Ze=66.495 Az status=0009 Ze status=0008 03:45:18 Check angles 03:45:18 SkyScan query 03:45:19 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 03:45:19 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 03:45:19 Message to Master queued w/err=0: serial=436 error=0 03:45:24 Received message from Master: op=Filter serial=437 03:45:24 Color wheel filter change from 0 to 0 03:45:24 FLIGetFilterPos err=0 currentPosition=0 03:45:24 FLIGetStepsRemaining err=0 RemainingSteps=0 03:45:24 Filter is already there-color wheel unchanged 03:45:24 Received message from Master: op=Shutter serial=438 03:45:24 Shutter LASER close 03:45:24 Received message from Camera: op=State serial=440 03:45:24 GetSingleValue result=40 Value=cccccccc 03:45:24 SkyScan query 03:45:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:45:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:25 Parameters OK 03:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:25 Set A/D data flow result=40 03:45:25 Set A/D channel type result=40 03:45:25 Set A/D encoding result=40 03:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:25 Set channel filter=0.000000e+000 result=40 03:45:25 Config A/D Result=40 03:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:25 Get A/D filter: -9.255963e+061 result=40 03:45:25 Get A/D value=-858993460 result=40 03:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:45:25 Parameters OK 03:45:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:45:25 Set A/D data flow result=40 03:45:25 Set A/D channel type result=40 03:45:25 Set A/D encoding result=40 03:45:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:45:25 Set channel filter=0.000000e+000 result=40 03:45:25 Config A/D Result=40 03:45:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:45:25 Get A/D filter: -9.255963e+061 result=40 03:45:25 Get A/D value=-858993460 result=40 03:45:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:45:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:45:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:45:25 Aux= 03:45:25 Message to Camera, serial 440 queued 03:45:56 Received message from Master: op=PointingHead serial=447 03:45:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:45:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:45:57 Point started: ret=0 03:45:57 point_skyscan result=0 03:45:57 Check angles 03:45:57 SkyScan query 03:45:58 SkyScan query done: ret=0 az=134.625<-8975 ze=36.285<-9581 Statuses=0009 0009 03:45:58 Msec=0 True Az=134.625 Ze=36.285 Az status=0009 Ze status=0009 03:45:58 Check angles 03:45:58 SkyScan query 03:45:59 SkyScan query done: ret=0 az=117.075<-7805 ze=15.315<-10979 Statuses=0009 0009 03:45:59 Msec=750 True Az=117.075 Ze=15.315 Az status=0009 Ze status=0009 03:45:59 Check angles 03:45:59 SkyScan query 03:46:00 SkyScan query done: ret=0 az=99.405<-6627 ze=-6.06<-12404 Statuses=0009 0009 03:46:00 Msec=1500 True Az=99.405 Ze=-6.06 Az status=0009 Ze status=0009 03:46:00 Check angles 03:46:00 SkyScan query 03:46:00 SkyScan query done: ret=0 az=81.945<-5463 ze=-27.015<-13801 Statuses=0009 0009 03:46:00 Msec=2250 True Az=81.945 Ze=-27.015 Az status=0009 Ze status=0009 03:46:00 Check angles 03:46:00 SkyScan query 03:46:01 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 03:46:01 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 03:46:01 Check angles 03:46:01 SkyScan query 03:46:02 SkyScan query done: ret=0 az=46.59<-3106 ze=-38.52<-14568 Statuses=0009 0008 03:46:02 Msec=3750 True Az=46.59 Ze=-38.52 Az status=0009 Ze status=0008 03:46:02 Check angles 03:46:02 SkyScan query 03:46:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:46:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:46:03 Message to Master queued w/err=0: serial=447 error=0 03:46:08 Received message from Master: op=Filter serial=448 03:46:08 Color wheel filter change from 0 to 0 03:46:08 FLIGetFilterPos err=0 currentPosition=0 03:46:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:08 Filter is already there-color wheel unchanged 03:46:08 Received message from Master: op=Shutter serial=449 03:46:08 Shutter LASER close 03:46:08 Received message from Camera: op=State serial=451 03:46:08 GetSingleValue result=40 Value=cccccccc 03:46:08 SkyScan query 03:46:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:46:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:09 Parameters OK 03:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:09 Set A/D data flow result=40 03:46:09 Set A/D channel type result=40 03:46:09 Set A/D encoding result=40 03:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:09 Set channel filter=0.000000e+000 result=40 03:46:09 Config A/D Result=40 03:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:09 Get A/D filter: -9.255963e+061 result=40 03:46:09 Get A/D value=-858993460 result=40 03:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:09 Parameters OK 03:46:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:09 Set A/D data flow result=40 03:46:09 Set A/D channel type result=40 03:46:09 Set A/D encoding result=40 03:46:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:09 Set channel filter=0.000000e+000 result=40 03:46:09 Config A/D Result=40 03:46:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:09 Get A/D filter: -9.255963e+061 result=40 03:46:09 Get A/D value=-858993460 result=40 03:46:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:09 Aux= 03:46:09 Message to Camera, serial 451 queued 03:46:40 Received message from Master: op=PointingHead serial=458 03:46:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:46:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:46:40 Point started: ret=0 03:46:40 point_skyscan result=0 03:46:41 Check angles 03:46:41 SkyScan query 03:46:42 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.7<-16580 Statuses=0009 0009 03:46:42 Msec=0 True Az=64.245 Ze=-68.7 Az status=0009 Ze status=0009 03:46:42 Check angles 03:46:42 SkyScan query 03:46:42 SkyScan query done: ret=0 az=81.945<-5463 ze=-89.64<-17976 Statuses=0009 0009 03:46:42 Msec=750 True Az=81.945 Ze=-89.64 Az status=0009 Ze status=0009 03:46:43 Check angles 03:46:43 SkyScan query 03:46:43 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.61<-19374 Statuses=0009 0009 03:46:43 Msec=1500 True Az=99.345 Ze=-110.61 Az status=0009 Ze status=0009 03:46:43 Check angles 03:46:43 SkyScan query 03:46:44 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.55<-20770 Statuses=0009 0009 03:46:44 Msec=2250 True Az=116.715 Ze=-131.55 Az status=0009 Ze status=0009 03:46:44 Check angles 03:46:44 SkyScan query 03:46:45 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 03:46:45 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 03:46:45 Check angles 03:46:45 SkyScan query 03:46:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:46:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:46:45 Message to Master queued w/err=0: serial=458 error=0 03:46:50 Received message from Master: op=Filter serial=459 03:46:50 Color wheel filter change from 0 to 0 03:46:50 FLIGetFilterPos err=0 currentPosition=0 03:46:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:46:50 Filter is already there-color wheel unchanged 03:46:51 Received message from Master: op=Shutter serial=460 03:46:51 Shutter LASER close 03:46:51 Received message from Camera: op=State serial=462 03:46:51 GetSingleValue result=40 Value=cccccccc 03:46:51 SkyScan query 03:46:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:46:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:52 Parameters OK 03:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:52 Set A/D data flow result=40 03:46:52 Set A/D channel type result=40 03:46:52 Set A/D encoding result=40 03:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:52 Set channel filter=0.000000e+000 result=40 03:46:52 Config A/D Result=40 03:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:52 Get A/D filter: -9.255963e+061 result=40 03:46:52 Get A/D value=-858993460 result=40 03:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:46:52 Parameters OK 03:46:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:46:52 Set A/D data flow result=40 03:46:52 Set A/D channel type result=40 03:46:52 Set A/D encoding result=40 03:46:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:46:52 Set channel filter=0.000000e+000 result=40 03:46:52 Config A/D Result=40 03:46:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:46:52 Get A/D filter: -9.255963e+061 result=40 03:46:52 Get A/D value=-858993460 result=40 03:46:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:46:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:46:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:46:52 Aux= 03:46:52 Message to Camera, serial 462 queued 03:47:22 Received message from Master: op=PointingHead serial=469 03:47:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:47:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:47:23 Point started: ret=0 03:47:23 point_skyscan result=0 03:47:24 Check angles 03:47:24 SkyScan query 03:47:24 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.925<-23395 Statuses=0009 0009 03:47:24 Msec=0 True Az=113.025 Ze=-170.925 Az status=0009 Ze status=0009 03:47:24 Check angles 03:47:24 SkyScan query 03:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:47:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:47:25 Message to Master queued w/err=0: serial=469 error=0 03:47:30 Received message from Master: op=Filter serial=470 03:47:30 Color wheel filter change from 0 to 0 03:47:30 FLIGetFilterPos err=0 currentPosition=0 03:47:30 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:30 Filter is already there-color wheel unchanged 03:47:30 Received message from Master: op=Shutter serial=471 03:47:30 Shutter LASER open 03:47:30 Received message from Camera: op=State serial=473 03:47:30 GetSingleValue result=40 Value=cccccccc 03:47:30 SkyScan query 03:47:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:47:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:31 Parameters OK 03:47:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:31 Set A/D data flow result=40 03:47:31 Set A/D channel type result=40 03:47:31 Set A/D encoding result=40 03:47:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:31 Set channel filter=0.000000e+000 result=40 03:47:31 Config A/D Result=40 03:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:31 Get A/D filter: -9.255963e+061 result=40 03:47:31 Get A/D value=-858993460 result=40 03:47:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:31 Parameters OK 03:47:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:31 Set A/D data flow result=40 03:47:31 Set A/D channel type result=40 03:47:31 Set A/D encoding result=40 03:47:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:31 Set channel filter=0.000000e+000 result=40 03:47:31 Config A/D Result=40 03:47:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:31 Get A/D filter: -9.255963e+061 result=40 03:47:31 Get A/D value=-858993460 result=40 03:47:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:31 Aux= 03:47:31 Message to Camera, serial 473 queued 03:47:33 Received message from Master: op=Shutter serial=477 03:47:33 Shutter LASER close 03:47:34 Received message from Master: op=PointingHead serial=481 03:47:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:47:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:47:34 Point started: ret=0 03:47:34 point_skyscan result=0 03:47:35 Check angles 03:47:35 SkyScan query 03:47:36 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.905<-21527 Statuses=0009 0009 03:47:36 Msec=0 True Az=136.155 Ze=-142.905 Az status=0009 Ze status=0009 03:47:36 Check angles 03:47:36 SkyScan query 03:47:36 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.95<-20130 Statuses=0009 0009 03:47:36 Msec=750 True Az=153.72 Ze=-121.95 Az status=0009 Ze status=0009 03:47:36 Check angles 03:47:36 SkyScan query 03:47:37 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.575<-18705 Statuses=0009 0009 03:47:37 Msec=1500 True Az=171.48 Ze=-100.575 Az status=0009 Ze status=0009 03:47:37 Check angles 03:47:37 SkyScan query 03:47:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.605<-17307 Statuses=0008 0009 03:47:38 Msec=2250 True Az=176.01 Ze=-79.605 Az status=0008 Ze status=0009 03:47:38 Check angles 03:47:38 SkyScan query 03:47:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.65<-15910 Statuses=0008 0009 03:47:39 Msec=3000 True Az=175.995 Ze=-58.65 Az status=0008 Ze status=0009 03:47:39 Check angles 03:47:39 SkyScan query 03:47:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:47:39 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:47:39 Message to Master queued w/err=0: serial=481 error=0 03:47:44 Received message from Master: op=Filter serial=482 03:47:44 Color wheel filter change from 0 to 0 03:47:44 FLIGetFilterPos err=0 currentPosition=0 03:47:44 FLIGetStepsRemaining err=0 RemainingSteps=0 03:47:44 Filter is already there-color wheel unchanged 03:47:44 Received message from Master: op=Shutter serial=483 03:47:44 Shutter LASER close 03:47:45 Received message from Camera: op=State serial=485 03:47:45 GetSingleValue result=40 Value=cccccccc 03:47:45 SkyScan query 03:47:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:47:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:45 Parameters OK 03:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:45 Set A/D data flow result=40 03:47:45 Set A/D channel type result=40 03:47:45 Set A/D encoding result=40 03:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:45 Set channel filter=0.000000e+000 result=40 03:47:45 Config A/D Result=40 03:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:45 Get A/D filter: -9.255963e+061 result=40 03:47:45 Get A/D value=-858993460 result=40 03:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:47:45 Parameters OK 03:47:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:47:45 Set A/D data flow result=40 03:47:45 Set A/D channel type result=40 03:47:45 Set A/D encoding result=40 03:47:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:47:45 Set channel filter=0.000000e+000 result=40 03:47:45 Config A/D Result=40 03:47:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:47:45 Get A/D filter: -9.255963e+061 result=40 03:47:45 Get A/D value=-858993460 result=40 03:47:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:47:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:47:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:47:45 Aux= 03:47:45 Message to Camera, serial 485 queued 03:48:16 Received message from Master: op=PointingHead serial=492 03:48:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:48:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:48:16 Point started: ret=0 03:48:16 point_skyscan result=0 03:48:17 Check angles 03:48:17 SkyScan query 03:48:18 SkyScan query done: ret=0 az=152.58<-10172 ze=-21.225<-13415 Statuses=0009 0009 03:48:18 Msec=0 True Az=152.58 Ze=-21.225 Az status=0009 Ze status=0009 03:48:18 Check angles 03:48:18 SkyScan query 03:48:18 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.255<-12017 Statuses=0009 0009 03:48:18 Msec=750 True Az=135.105 Ze=-0.255 Az status=0009 Ze status=0009 03:48:19 Check angles 03:48:19 SkyScan query 03:48:19 SkyScan query done: ret=0 az=117.57<-7838 ze=20.685<-10621 Statuses=0009 0009 03:48:19 Msec=1500 True Az=117.57 Ze=20.685 Az status=0009 Ze status=0009 03:48:19 Check angles 03:48:19 SkyScan query 03:48:20 SkyScan query done: ret=0 az=99.69<-6646 ze=42.09<-9194 Statuses=0009 0009 03:48:20 Msec=2250 True Az=99.69 Ze=42.09 Az status=0009 Ze status=0009 03:48:20 Check angles 03:48:20 SkyScan query 03:48:21 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 03:48:21 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 03:48:21 Check angles 03:48:21 SkyScan query 03:48:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:48:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:48:21 Message to Master queued w/err=0: serial=492 error=0 03:48:26 Received message from Master: op=Filter serial=493 03:48:26 Color wheel filter change from 0 to 0 03:48:26 FLIGetFilterPos err=0 currentPosition=0 03:48:26 FLIGetStepsRemaining err=0 RemainingSteps=0 03:48:26 Filter is already there-color wheel unchanged 03:48:27 Received message from Master: op=Shutter serial=494 03:48:27 Shutter LASER close 03:48:27 Received message from Camera: op=State serial=496 03:48:27 GetSingleValue result=40 Value=cccccccc 03:48:27 SkyScan query 03:48:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:48:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:27 Parameters OK 03:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:27 Set A/D data flow result=40 03:48:27 Set A/D channel type result=40 03:48:27 Set A/D encoding result=40 03:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:27 Set channel filter=0.000000e+000 result=40 03:48:27 Config A/D Result=40 03:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:27 Get A/D filter: -9.255963e+061 result=40 03:48:27 Get A/D value=-858993460 result=40 03:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:48:27 Parameters OK 03:48:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:48:27 Set A/D data flow result=40 03:48:27 Set A/D channel type result=40 03:48:27 Set A/D encoding result=40 03:48:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:48:27 Set channel filter=0.000000e+000 result=40 03:48:27 Config A/D Result=40 03:48:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:48:27 Get A/D filter: -9.255963e+061 result=40 03:48:27 Get A/D value=-858993460 result=40 03:48:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:48:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:48:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:48:27 Aux= 03:48:27 Message to Camera, serial 496 queued 03:48:58 Received message from Master: op=PointingHead serial=503 03:48:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:48:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:48:58 Point started: ret=0 03:48:58 point_skyscan result=0 03:48:59 Check angles 03:48:59 SkyScan query 03:49:00 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 03:49:00 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 03:49:00 Check angles 03:49:00 SkyScan query 03:49:01 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 03:49:01 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 03:49:01 Check angles 03:49:01 SkyScan query 03:49:01 SkyScan query done: ret=0 az=144.525<-9635 ze=38.505<-9433 Statuses=0009 0008 03:49:01 Msec=1500 True Az=144.525 Ze=38.505 Az status=0009 Ze status=0008 03:49:02 Check angles 03:49:02 SkyScan query 03:49:02 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 03:49:02 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 03:49:02 Check angles 03:49:02 SkyScan query 03:49:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:49:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:49:03 Check angles 03:49:03 SkyScan query 03:49:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:49:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:49:04 Message to Master queued w/err=0: serial=503 error=0 03:49:09 Received message from Master: op=Filter serial=504 03:49:09 Color wheel filter change from 0 to 0 03:49:09 FLIGetFilterPos err=0 currentPosition=0 03:49:09 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:09 Filter is already there-color wheel unchanged 03:49:09 Received message from Master: op=Shutter serial=505 03:49:09 Shutter LASER close 03:49:09 Received message from Camera: op=State serial=507 03:49:09 GetSingleValue result=40 Value=cccccccc 03:49:09 SkyScan query 03:49:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:49:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:09 Parameters OK 03:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:09 Set A/D data flow result=40 03:49:09 Set A/D channel type result=40 03:49:09 Set A/D encoding result=40 03:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:09 Set channel filter=0.000000e+000 result=40 03:49:09 Config A/D Result=40 03:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:09 Get A/D filter: -9.255963e+061 result=40 03:49:09 Get A/D value=-858993460 result=40 03:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:09 Parameters OK 03:49:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:09 Set A/D data flow result=40 03:49:09 Set A/D channel type result=40 03:49:09 Set A/D encoding result=40 03:49:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:09 Set channel filter=0.000000e+000 result=40 03:49:09 Config A/D Result=40 03:49:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:09 Get A/D filter: -9.255963e+061 result=40 03:49:09 Get A/D value=-858993460 result=40 03:49:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:09 Aux= 03:49:09 Message to Camera, serial 507 queued 03:49:40 Received message from Master: op=PointingHead serial=514 03:49:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:49:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:49:41 Point started: ret=0 03:49:41 point_skyscan result=0 03:49:41 Check angles 03:49:41 SkyScan query 03:49:42 SkyScan query done: ret=0 az=152.97<-10198 ze=8.67<-11422 Statuses=0009 0009 03:49:42 Msec=0 True Az=152.97 Ze=8.67 Az status=0009 Ze status=0009 03:49:42 Check angles 03:49:42 SkyScan query 03:49:43 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.285<-12819 Statuses=0009 0009 03:49:43 Msec=750 True Az=135.45 Ze=-12.285 Az status=0009 Ze status=0009 03:49:43 Check angles 03:49:43 SkyScan query 03:49:43 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.225<-14215 Statuses=0009 0009 03:49:43 Msec=1500 True Az=118.02 Ze=-33.225 Az status=0009 Ze status=0009 03:49:44 Check angles 03:49:44 SkyScan query 03:49:44 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.54<-15436 Statuses=0009 0009 03:49:44 Msec=2250 True Az=100.245 Ze=-51.54 Az status=0009 Ze status=0009 03:49:44 Check angles 03:49:44 SkyScan query 03:49:45 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 03:49:45 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 03:49:45 Check angles 03:49:45 SkyScan query 03:49:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 03:49:46 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 03:49:46 Message to Master queued w/err=0: serial=514 error=0 03:49:51 Received message from Master: op=Filter serial=515 03:49:51 Color wheel filter change from 0 to 0 03:49:51 FLIGetFilterPos err=0 currentPosition=0 03:49:51 FLIGetStepsRemaining err=0 RemainingSteps=0 03:49:51 Filter is already there-color wheel unchanged 03:49:51 Received message from Master: op=Shutter serial=516 03:49:51 Shutter LASER close 03:49:51 Received message from Camera: op=State serial=518 03:49:51 GetSingleValue result=40 Value=cccccccc 03:49:51 SkyScan query 03:49:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:49:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:51 Parameters OK 03:49:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:51 Set A/D data flow result=40 03:49:51 Set A/D channel type result=40 03:49:51 Set A/D encoding result=40 03:49:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:51 Set channel filter=0.000000e+000 result=40 03:49:51 Config A/D Result=40 03:49:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:51 Get A/D filter: -9.255963e+061 result=40 03:49:51 Get A/D value=-858993460 result=40 03:49:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:49:51 Parameters OK 03:49:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:49:51 Set A/D data flow result=40 03:49:51 Set A/D channel type result=40 03:49:51 Set A/D encoding result=40 03:49:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:49:51 Set channel filter=0.000000e+000 result=40 03:49:51 Config A/D Result=40 03:49:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:49:51 Get A/D filter: -9.255963e+061 result=40 03:49:51 Get A/D value=-858993460 result=40 03:49:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:49:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:49:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:49:51 Aux= 03:49:51 Message to Camera, serial 518 queued 03:50:22 Received message from Master: op=PointingHead serial=525 03:50:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:50:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:50:23 Point started: ret=0 03:50:23 point_skyscan result=0 03:50:23 Check angles 03:50:23 SkyScan query 03:50:24 SkyScan query done: ret=0 az=108.735<-7249 ze=-80.97<-17398 Statuses=0009 0009 03:50:24 Msec=0 True Az=108.735 Ze=-80.97 Az status=0009 Ze status=0009 03:50:24 Check angles 03:50:24 SkyScan query 03:50:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.39<-18826 Statuses=0008 0009 03:50:25 Msec=750 True Az=113.01 Ze=-102.39 Az status=0008 Ze status=0009 03:50:25 Check angles 03:50:25 SkyScan query 03:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.75<-20250 Statuses=0008 0009 03:50:26 Msec=1500 True Az=112.995 Ze=-123.75 Az status=0008 Ze status=0009 03:50:26 Check angles 03:50:26 SkyScan query 03:50:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.72<-21648 Statuses=0008 0009 03:50:26 Msec=2250 True Az=112.995 Ze=-144.72 Az status=0008 Ze status=0009 03:50:26 Check angles 03:50:26 SkyScan query 03:50:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.66<-23044 Statuses=0008 0009 03:50:27 Msec=3000 True Az=112.995 Ze=-165.66 Az status=0008 Ze status=0009 03:50:27 Check angles 03:50:27 SkyScan query 03:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:50:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:50:28 Message to Master queued w/err=0: serial=525 error=0 03:50:33 Received message from Master: op=Filter serial=526 03:50:33 Color wheel filter change from 0 to 0 03:50:33 FLIGetFilterPos err=0 currentPosition=0 03:50:33 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:33 Filter is already there-color wheel unchanged 03:50:33 Received message from Master: op=Shutter serial=527 03:50:33 Shutter LASER open 03:50:33 Received message from Camera: op=State serial=529 03:50:33 GetSingleValue result=40 Value=cccccccc 03:50:33 SkyScan query 03:50:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:50:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:34 Parameters OK 03:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:34 Set A/D data flow result=40 03:50:34 Set A/D channel type result=40 03:50:34 Set A/D encoding result=40 03:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:34 Set channel filter=0.000000e+000 result=40 03:50:34 Config A/D Result=40 03:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:34 Get A/D filter: -9.255963e+061 result=40 03:50:34 Get A/D value=-858993460 result=40 03:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:34 Parameters OK 03:50:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:34 Set A/D data flow result=40 03:50:34 Set A/D channel type result=40 03:50:34 Set A/D encoding result=40 03:50:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:34 Set channel filter=0.000000e+000 result=40 03:50:34 Config A/D Result=40 03:50:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:34 Get A/D filter: -9.255963e+061 result=40 03:50:34 Get A/D value=-858993460 result=40 03:50:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:34 Aux= 03:50:34 Message to Camera, serial 529 queued 03:50:36 Received message from Master: op=Shutter serial=533 03:50:36 Shutter LASER close 03:50:37 Received message from Master: op=PointingHead serial=537 03:50:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:50:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:50:37 Point started: ret=0 03:50:37 point_skyscan result=0 03:50:38 Check angles 03:50:38 SkyScan query 03:50:38 SkyScan query done: ret=0 az=90.285<-6019 ze=157.575<-1495 Statuses=0009 0009 03:50:38 Msec=0 True Az=90.285 Ze=157.575 Az status=0009 Ze status=0009 03:50:38 Check angles 03:50:38 SkyScan query 03:50:39 SkyScan query done: ret=0 az=72.84<-4856 ze=136.605<-2893 Statuses=0009 0009 03:50:39 Msec=750 True Az=72.84 Ze=136.605 Az status=0009 Ze status=0009 03:50:39 Check angles 03:50:39 SkyScan query 03:50:40 SkyScan query done: ret=0 az=55.245<-3683 ze=115.665<-4289 Statuses=0009 0009 03:50:40 Msec=1500 True Az=55.245 Ze=115.665 Az status=0009 Ze status=0009 03:50:40 Check angles 03:50:40 SkyScan query 03:50:40 SkyScan query done: ret=0 az=41.04<-2736 ze=94.695<-5687 Statuses=0009 0009 03:50:40 Msec=2250 True Az=41.04 Ze=94.695 Az status=0009 Ze status=0009 03:50:41 Check angles 03:50:41 SkyScan query 03:50:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 03:50:41 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 03:50:41 Check angles 03:50:41 SkyScan query 03:50:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 03:50:42 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 03:50:42 Check angles 03:50:42 SkyScan query 03:50:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:50:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:50:43 Message to Master queued w/err=0: serial=537 error=0 03:50:48 Received message from Master: op=Filter serial=538 03:50:48 Color wheel filter change from 0 to 0 03:50:48 FLIGetFilterPos err=0 currentPosition=0 03:50:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:50:48 Filter is already there-color wheel unchanged 03:50:48 Received message from Master: op=Shutter serial=539 03:50:48 Shutter LASER close 03:50:48 Received message from Camera: op=State serial=541 03:50:48 GetSingleValue result=40 Value=cccccccc 03:50:48 SkyScan query 03:50:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:50:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:49 Parameters OK 03:50:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:49 Set A/D data flow result=40 03:50:49 Set A/D channel type result=40 03:50:49 Set A/D encoding result=40 03:50:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-4 03:50:49] 03:50:49 Set channel filter=0.000000e+000 result=40 03:50:49 Config A/D Result=40 03:50:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:49 Get A/D filter: -9.255963e+061 result=40 03:50:49 Get A/D value=-858993460 result=40 03:50:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:50:49 Parameters OK 03:50:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:50:49 Set A/D data flow result=40 03:50:49 Set A/D channel type result=40 03:50:49 Set A/D encoding result=40 03:50:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:50:49 Set channel filter=0.000000e+000 result=40 03:50:49 Config A/D Result=40 03:50:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:50:49 Get A/D filter: -9.255963e+061 result=40 03:50:49 Get A/D value=-858993460 result=40 03:50:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:50:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:50:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:50:49 Aux= 03:50:49 Message to Camera, serial 541 queued 03:51:20 Received message from Master: op=PointingHead serial=548 03:51:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:51:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:51:20 Point started: ret=0 03:51:20 point_skyscan result=0 03:51:21 Check angles 03:51:21 SkyScan query 03:51:21 SkyScan query done: ret=0 az=63.66<-4244 ze=66.555<-7563 Statuses=0009 0008 03:51:21 Msec=0 True Az=63.66 Ze=66.555 Az status=0009 Ze status=0008 03:51:21 Check angles 03:51:21 SkyScan query 03:51:22 SkyScan query done: ret=0 az=81.15<-5410 ze=66.51<-7566 Statuses=0009 0008 03:51:22 Msec=750 True Az=81.15 Ze=66.51 Az status=0009 Ze status=0008 03:51:22 Check angles 03:51:22 SkyScan query 03:51:23 SkyScan query done: ret=0 az=98.745<-6583 ze=66.495<-7567 Statuses=0009 0008 03:51:23 Msec=1500 True Az=98.745 Ze=66.495 Az status=0009 Ze status=0008 03:51:23 Check angles 03:51:23 SkyScan query 03:51:24 SkyScan query done: ret=0 az=116.115<-7741 ze=66.495<-7567 Statuses=0009 0008 03:51:24 Msec=2250 True Az=116.115 Ze=66.495 Az status=0009 Ze status=0008 03:51:24 Check angles 03:51:24 SkyScan query 03:51:24 SkyScan query done: ret=0 az=133.86<-8924 ze=66.495<-7567 Statuses=0009 0008 03:51:24 Msec=3000 True Az=133.86 Ze=66.495 Az status=0009 Ze status=0008 03:51:24 Check angles 03:51:24 SkyScan query 03:51:25 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 03:51:25 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 03:51:25 Check angles 03:51:25 SkyScan query 03:51:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 03:51:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 03:51:26 Message to Master queued w/err=0: serial=548 error=0 03:51:31 Received message from Master: op=Filter serial=549 03:51:31 Color wheel filter change from 0 to 0 03:51:31 FLIGetFilterPos err=0 currentPosition=0 03:51:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:51:31 Filter is already there-color wheel unchanged 03:51:31 Received message from Master: op=Shutter serial=550 03:51:31 Shutter LASER close 03:51:31 Received message from Camera: op=State serial=552 03:51:31 GetSingleValue result=40 Value=cccccccc 03:51:31 SkyScan query 03:51:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:51:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:32 Parameters OK 03:51:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:32 Set A/D data flow result=40 03:51:32 Set A/D channel type result=40 03:51:32 Set A/D encoding result=40 03:51:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:32 Set channel filter=0.000000e+000 result=40 03:51:32 Config A/D Result=40 03:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:32 Get A/D filter: -9.255963e+061 result=40 03:51:32 Get A/D value=-858993460 result=40 03:51:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:51:32 Parameters OK 03:51:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:51:32 Set A/D data flow result=40 03:51:32 Set A/D channel type result=40 03:51:32 Set A/D encoding result=40 03:51:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:51:32 Set channel filter=0.000000e+000 result=40 03:51:32 Config A/D Result=40 03:51:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:51:32 Get A/D filter: -9.255963e+061 result=40 03:51:32 Get A/D value=-858993460 result=40 03:51:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:51:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:51:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:51:32 Aux= 03:51:32 Message to Camera, serial 552 queued 03:51:49 Received message from Master: op=Identify serial=553 03:52:04 Received message from Master: op=PointingHead serial=562 03:52:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:52:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:52:04 Point started: ret=0 03:52:04 point_skyscan result=0 03:52:05 Check angles 03:52:05 SkyScan query 03:52:05 SkyScan query done: ret=0 az=134.655<-8977 ze=36.705<-9553 Statuses=0009 0009 03:52:05 Msec=0 True Az=134.655 Ze=36.705 Az status=0009 Ze status=0009 03:52:05 Check angles 03:52:05 SkyScan query 03:52:06 SkyScan query done: ret=0 az=117.18<-7812 ze=15.75<-10950 Statuses=0009 0009 03:52:06 Msec=750 True Az=117.18 Ze=15.75 Az status=0009 Ze status=0009 03:52:06 Check angles 03:52:06 SkyScan query 03:52:07 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.55<-12370 Statuses=0009 0009 03:52:07 Msec=1500 True Az=99.54 Ze=-5.55 Az status=0009 Ze status=0009 03:52:07 Check angles 03:52:07 SkyScan query 03:52:08 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.115<-13741 Statuses=0009 0009 03:52:08 Msec=2250 True Az=82.2 Ze=-26.115 Az status=0009 Ze status=0009 03:52:08 Check angles 03:52:08 SkyScan query 03:52:08 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 03:52:08 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 03:52:08 Check angles 03:52:08 SkyScan query 03:52:09 SkyScan query done: ret=0 az=47.1<-3140 ze=-38.535<-14569 Statuses=0009 0008 03:52:09 Msec=3750 True Az=47.1 Ze=-38.535 Az status=0009 Ze status=0008 [UTC 2018-12-4 03:52:09] 03:52:09 Check angles 03:52:09 SkyScan query 03:52:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:52:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:52:10 Message to Master queued w/err=0: serial=562 error=0 03:52:15 Received message from Master: op=Filter serial=563 03:52:15 Color wheel filter change from 0 to 0 03:52:15 FLIGetFilterPos err=0 currentPosition=0 03:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:15 Filter is already there-color wheel unchanged 03:52:16 Received message from Master: op=Shutter serial=564 03:52:16 Shutter LASER close 03:52:16 Received message from Camera: op=State serial=566 03:52:16 GetSingleValue result=40 Value=cccccccc 03:52:16 SkyScan query 03:52:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:52:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:17 Parameters OK 03:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:17 Set A/D data flow result=40 03:52:17 Set A/D channel type result=40 03:52:17 Set A/D encoding result=40 03:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:17 Set channel filter=0.000000e+000 result=40 03:52:17 Config A/D Result=40 03:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:17 Get A/D filter: -9.255963e+061 result=40 03:52:17 Get A/D value=-858993460 result=40 03:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:52:17 Parameters OK 03:52:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:52:17 Set A/D data flow result=40 03:52:17 Set A/D channel type result=40 03:52:17 Set A/D encoding result=40 03:52:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:52:17 Set channel filter=0.000000e+000 result=40 03:52:17 Config A/D Result=40 03:52:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:52:17 Get A/D filter: -9.255963e+061 result=40 03:52:17 Get A/D value=-858993460 result=40 03:52:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:52:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:52:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:52:17 Aux= 03:52:17 Message to Camera, serial 566 queued 03:52:49 Received message from Master: op=PointingHead serial=573 03:52:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:52:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:52:49 Point started: ret=0 03:52:49 point_skyscan result=0 03:52:50 Check angles 03:52:50 SkyScan query 03:52:50 SkyScan query done: ret=0 az=64.59<-4306 ze=-68.16<-16544 Statuses=0009 0009 03:52:50 Msec=0 True Az=64.59 Ze=-68.16 Az status=0009 Ze status=0009 03:52:51 Check angles 03:52:51 SkyScan query 03:52:51 SkyScan query done: ret=0 az=82.83<-5522 ze=-89.88<-17992 Statuses=0009 0009 03:52:51 Msec=750 True Az=82.83 Ze=-89.88 Az status=0009 Ze status=0009 03:52:51 Check angles 03:52:51 SkyScan query 03:52:52 SkyScan query done: ret=0 az=100.32<-6688 ze=-111.03<-19402 Statuses=0009 0009 03:52:52 Msec=1500 True Az=100.32 Ze=-111.03 Az status=0009 Ze status=0009 03:52:52 Check angles 03:52:52 SkyScan query 03:52:53 SkyScan query done: ret=0 az=117.57<-7838 ze=-131.595<-20773 Statuses=0009 0009 03:52:53 Msec=2250 True Az=117.57 Ze=-131.595 Az status=0009 Ze status=0009 03:52:53 Check angles 03:52:53 SkyScan query 03:52:54 SkyScan query done: ret=0 az=131.025<-8735 ze=-141.525<-21435 Statuses=0009 0008 03:52:54 Msec=3000 True Az=131.025 Ze=-141.525 Az status=0009 Ze status=0008 03:52:54 Check angles 03:52:54 SkyScan query 03:52:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:52:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:52:54 Message to Master queued w/err=0: serial=573 error=0 03:52:59 Received message from Master: op=Filter serial=574 03:52:59 Color wheel filter change from 0 to 0 03:52:59 FLIGetFilterPos err=0 currentPosition=0 03:52:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:52:59 Filter is already there-color wheel unchanged 03:53:00 Received message from Master: op=Shutter serial=575 03:53:00 Shutter LASER close 03:53:00 Received message from Camera: op=State serial=577 03:53:00 GetSingleValue result=40 Value=cccccccc 03:53:00 SkyScan query 03:53:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:53:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:01 Parameters OK 03:53:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:01 Set A/D data flow result=40 03:53:01 Set A/D channel type result=40 03:53:01 Set A/D encoding result=40 03:53:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:01 Set channel filter=0.000000e+000 result=40 03:53:01 Config A/D Result=40 03:53:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:01 Get A/D filter: -9.255963e+061 result=40 03:53:01 Get A/D value=-858993460 result=40 03:53:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:01 Parameters OK 03:53:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:01 Set A/D data flow result=40 03:53:01 Set A/D channel type result=40 03:53:01 Set A/D encoding result=40 03:53:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:01 Set channel filter=0.000000e+000 result=40 03:53:01 Config A/D Result=40 03:53:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:01 Get A/D filter: -9.255963e+061 result=40 03:53:01 Get A/D value=-858993460 result=40 03:53:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:01 Aux= 03:53:01 Message to Camera, serial 577 queued 03:53:33 Received message from Master: op=PointingHead serial=584 03:53:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:53:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:53:34 Point started: ret=0 03:53:34 point_skyscan result=0 03:53:34 Check angles 03:53:34 SkyScan query 03:53:35 SkyScan query done: ret=0 az=112.98<-7532 ze=-171.495<-23433 Statuses=0008 0009 03:53:35 Msec=0 True Az=112.98 Ze=-171.495 Az status=0008 Ze status=0009 03:53:35 Check angles 03:53:35 SkyScan query 03:53:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:53:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:53:36 Message to Master queued w/err=0: serial=584 error=0 03:53:41 Received message from Master: op=Filter serial=585 03:53:41 Color wheel filter change from 0 to 0 03:53:41 FLIGetFilterPos err=0 currentPosition=0 03:53:41 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:41 Filter is already there-color wheel unchanged 03:53:42 Received message from Master: op=Shutter serial=586 03:53:42 Shutter LASER open 03:53:43 Received message from Camera: op=State serial=588 03:53:43 GetSingleValue result=40 Value=cccccccc 03:53:43 SkyScan query 03:53:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:53:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:43 Parameters OK 03:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:43 Set A/D data flow result=40 03:53:43 Set A/D channel type result=40 03:53:43 Set A/D encoding result=40 03:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:43 Set channel filter=0.000000e+000 result=40 03:53:43 Config A/D Result=40 03:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:43 Get A/D filter: -9.255963e+061 result=40 03:53:43 Get A/D value=-858993460 result=40 03:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:53:43 Parameters OK 03:53:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:53:43 Set A/D data flow result=40 03:53:43 Set A/D channel type result=40 03:53:43 Set A/D encoding result=40 03:53:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:53:43 Set channel filter=0.000000e+000 result=40 03:53:43 Config A/D Result=40 03:53:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:53:43 Get A/D filter: -9.255963e+061 result=40 03:53:43 Get A/D value=-858993460 result=40 03:53:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:53:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:53:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:53:43 Aux= 03:53:43 Message to Camera, serial 588 queued 03:53:46 Received message from Master: op=Shutter serial=592 03:53:46 Shutter LASER close 03:53:48 Received message from Master: op=PointingHead serial=596 03:53:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:53:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:53:49 Point started: ret=0 03:53:49 point_skyscan result=0 03:53:49 Check angles 03:53:49 SkyScan query 03:53:50 SkyScan query done: ret=0 az=136.605<-9107 ze=-142.905<-21527 Statuses=0009 0009 03:53:50 Msec=0 True Az=136.605 Ze=-142.905 Az status=0009 Ze status=0009 03:53:50 Check angles 03:53:50 SkyScan query 03:53:51 SkyScan query done: ret=0 az=154.5<-10300 ze=-121.125<-20075 Statuses=0009 0009 03:53:51 Msec=750 True Az=154.5 Ze=-121.125 Az status=0009 Ze status=0009 03:53:51 Check angles 03:53:51 SkyScan query 03:53:51 SkyScan query done: ret=0 az=172.32<-11488 ze=-100.335<-18689 Statuses=0009 0009 03:53:51 Msec=1500 True Az=172.32 Ze=-100.335 Az status=0009 Ze status=0009 03:53:52 Check angles 03:53:52 SkyScan query 03:53:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.245<-17283 Statuses=0008 0009 03:53:52 Msec=2250 True Az=176.025 Ze=-79.245 Az status=0008 Ze status=0009 03:53:52 Check angles 03:53:52 SkyScan query 03:53:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.305<-15887 Statuses=0008 0009 03:53:53 Msec=3000 True Az=175.995 Ze=-58.305 Az status=0008 Ze status=0009 03:53:53 Check angles 03:53:53 SkyScan query 03:53:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 03:53:54 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 03:53:54 Message to Master queued w/err=0: serial=596 error=0 03:53:59 Received message from Master: op=Filter serial=597 03:53:59 Color wheel filter change from 0 to 0 03:53:59 FLIGetFilterPos err=0 currentPosition=0 03:53:59 FLIGetStepsRemaining err=0 RemainingSteps=0 03:53:59 Filter is already there-color wheel unchanged 03:53:59 Received message from Master: op=Shutter serial=598 03:53:59 Shutter LASER close 03:53:59 Received message from Camera: op=State serial=600 03:53:59 GetSingleValue result=40 Value=cccccccc 03:53:59 SkyScan query 03:54:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 03:54:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:00 Parameters OK 03:54:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:00 Set A/D data flow result=40 03:54:00 Set A/D channel type result=40 03:54:00 Set A/D encoding result=40 03:54:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:00 Set channel filter=0.000000e+000 result=40 03:54:00 Config A/D Result=40 03:54:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:00 Get A/D filter: -9.255963e+061 result=40 03:54:00 Get A/D value=-858993460 result=40 03:54:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:00 Parameters OK 03:54:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:00 Set A/D data flow result=40 03:54:00 Set A/D channel type result=40 03:54:00 Set A/D encoding result=40 03:54:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:00 Set channel filter=0.000000e+000 result=40 03:54:00 Config A/D Result=40 03:54:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:00 Get A/D filter: -9.255963e+061 result=40 03:54:00 Get A/D value=-858993460 result=40 03:54:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:00 Aux= 03:54:00 Message to Camera, serial 600 queued 03:54:31 Received message from Master: op=PointingHead serial=607 03:54:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 03:54:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 03:54:32 Point started: ret=0 03:54:32 point_skyscan result=0 03:54:32 Check angles 03:54:32 SkyScan query 03:54:33 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.585<-13439 Statuses=0009 0009 03:54:33 Msec=0 True Az=152.985 Ze=-21.585 Az status=0009 Ze status=0009 03:54:33 Check angles 03:54:33 SkyScan query 03:54:34 SkyScan query done: ret=0 az=134.835<-8989 ze=0.45<-11970 Statuses=0009 0009 03:54:34 Msec=750 True Az=134.835 Ze=0.45 Az status=0009 Ze status=0009 03:54:34 Check angles 03:54:34 SkyScan query 03:54:34 SkyScan query done: ret=0 az=117.045<-7803 ze=21.675<-10555 Statuses=0009 0009 03:54:34 Msec=1500 True Az=117.045 Ze=21.675 Az status=0009 Ze status=0009 03:54:35 Check angles 03:54:35 SkyScan query 03:54:35 SkyScan query done: ret=0 az=100.17<-6678 ze=41.73<-9218 Statuses=0009 0009 03:54:35 Msec=2250 True Az=100.17 Ze=41.73 Az status=0009 Ze status=0009 03:54:35 Check angles 03:54:35 SkyScan query 03:54:36 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 03:54:36 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 03:54:36 Check angles 03:54:36 SkyScan query 03:54:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 03:54:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 03:54:37 Message to Master queued w/err=0: serial=607 error=0 03:54:42 Received message from Master: op=Filter serial=608 03:54:42 Color wheel filter change from 0 to 0 03:54:42 FLIGetFilterPos err=0 currentPosition=0 03:54:42 FLIGetStepsRemaining err=0 RemainingSteps=0 03:54:42 Filter is already there-color wheel unchanged 03:54:42 Received message from Master: op=Shutter serial=609 03:54:42 Shutter LASER close 03:54:42 Received message from Camera: op=State serial=611 03:54:42 GetSingleValue result=40 Value=cccccccc 03:54:42 SkyScan query 03:54:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 03:54:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:43 Parameters OK 03:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:43 Set A/D data flow result=40 03:54:43 Set A/D channel type result=40 03:54:43 Set A/D encoding result=40 03:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:43 Set channel filter=0.000000e+000 result=40 03:54:43 Config A/D Result=40 03:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:43 Get A/D filter: -9.255963e+061 result=40 03:54:43 Get A/D value=-858993460 result=40 03:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:54:43 Parameters OK 03:54:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:54:43 Set A/D data flow result=40 03:54:43 Set A/D channel type result=40 03:54:43 Set A/D encoding result=40 03:54:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:54:43 Set channel filter=0.000000e+000 result=40 03:54:43 Config A/D Result=40 03:54:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:54:43 Get A/D filter: -9.255963e+061 result=40 03:54:43 Get A/D value=-858993460 result=40 03:54:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:54:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:54:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:54:43 Aux= 03:54:43 Message to Camera, serial 611 queued 03:55:14 Received message from Master: op=PointingHead serial=618 03:55:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 03:55:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 03:55:15 Point started: ret=0 03:55:15 point_skyscan result=0 03:55:15 Check angles 03:55:15 SkyScan query 03:55:16 SkyScan query done: ret=0 az=109.83<-7322 ze=38.49<-9434 Statuses=0009 0008 03:55:16 Msec=0 True Az=109.83 Ze=38.49 Az status=0009 Ze status=0008 03:55:16 Check angles 03:55:16 SkyScan query 03:55:17 SkyScan query done: ret=0 az=127.11<-8474 ze=38.505<-9433 Statuses=0009 0008 03:55:17 Msec=750 True Az=127.11 Ze=38.505 Az status=0009 Ze status=0008 03:55:17 Check angles 03:55:17 SkyScan query 03:55:18 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 03:55:18 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 03:55:18 Check angles 03:55:18 SkyScan query 03:55:18 SkyScan query done: ret=0 az=162.405<-10827 ze=38.505<-9433 Statuses=0009 0008 03:55:18 Msec=2250 True Az=162.405 Ze=38.505 Az status=0009 Ze status=0008 03:55:18 Check angles 03:55:18 SkyScan query 03:55:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 03:55:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 03:55:19 Check angles 03:55:19 SkyScan query 03:55:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 03:55:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 03:55:20 Message to Master queued w/err=0: serial=618 error=0 03:55:25 Received message from Master: op=Filter serial=619 03:55:25 Color wheel filter change from 0 to 0 03:55:25 FLIGetFilterPos err=0 currentPosition=0 03:55:25 FLIGetStepsRemaining err=0 RemainingSteps=0 03:55:25 Filter is already there-color wheel unchanged 03:55:25 Received message from Master: op=Shutter serial=620 03:55:25 Shutter LASER close 03:55:26 Received message from Camera: op=State serial=622 03:55:26 GetSingleValue result=40 Value=cccccccc 03:55:26 SkyScan query 03:55:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 03:55:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:26 Parameters OK 03:55:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:26 Set A/D data flow result=40 03:55:26 Set A/D channel type result=40 03:55:26 Set A/D encoding result=40 03:55:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:26 Set channel filter=0.000000e+000 result=40 03:55:26 Config A/D Result=40 03:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:26 Get A/D filter: -9.255963e+061 result=40 03:55:26 Get A/D value=-858993460 result=40 03:55:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:55:26 Parameters OK 03:55:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:55:26 Set A/D data flow result=40 03:55:26 Set A/D channel type result=40 03:55:26 Set A/D encoding result=40 03:55:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:55:26 Set channel filter=0.000000e+000 result=40 03:55:26 Config A/D Result=40 03:55:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:55:26 Get A/D filter: -9.255963e+061 result=40 03:55:26 Get A/D value=-858993460 result=40 03:55:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:55:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:55:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:55:26 Aux= 03:55:26 Message to Camera, serial 622 queued 03:55:57 Received message from Master: op=PointingHead serial=629 03:55:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 03:55:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 03:55:58 Point started: ret=0 03:55:58 point_skyscan result=0 03:55:58 Check angles 03:55:58 SkyScan query 03:55:59 SkyScan query done: ret=0 az=153.18<-10212 ze=8.895<-11407 Statuses=0009 0009 03:55:59 Msec=0 True Az=153.18 Ze=8.895 Az status=0009 Ze status=0009 03:55:59 Check angles 03:55:59 SkyScan query 03:56:00 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.465<-12831 Statuses=0009 0009 03:56:00 Msec=750 True Az=135.375 Ze=-12.465 Az status=0009 Ze status=0009 03:56:00 Check angles 03:56:00 SkyScan query 03:56:00 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.405<-14227 Statuses=0009 0009 03:56:00 Msec=1500 True Az=117.825 Ze=-33.405 Az status=0009 Ze status=0009 03:56:01 Check angles 03:56:01 SkyScan query 03:56:01 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 03:56:01 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 03:56:01 Check angles 03:56:01 SkyScan query 03:56:02 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 03:56:02 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 03:56:02 Check angles 03:56:02 SkyScan query 03:56:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:56:03 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 03:56:03 Message to Master queued w/err=0: serial=629 error=0 03:56:08 Received message from Master: op=Filter serial=630 03:56:08 Color wheel filter change from 0 to 0 03:56:08 FLIGetFilterPos err=0 currentPosition=0 03:56:08 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:08 Filter is already there-color wheel unchanged 03:56:08 Received message from Master: op=Shutter serial=631 03:56:08 Shutter LASER close 03:56:08 Received message from Camera: op=State serial=633 03:56:08 GetSingleValue result=40 Value=cccccccc 03:56:08 SkyScan query 03:56:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 03:56:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:08 Parameters OK 03:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:08 Set A/D data flow result=40 03:56:08 Set A/D channel type result=40 03:56:08 Set A/D encoding result=40 03:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:08 Set channel filter=0.000000e+000 result=40 03:56:08 Config A/D Result=40 03:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:08 Get A/D filter: -9.255963e+061 result=40 03:56:08 Get A/D value=-858993460 result=40 03:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:08 Parameters OK 03:56:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:08 Set A/D data flow result=40 03:56:08 Set A/D channel type result=40 03:56:08 Set A/D encoding result=40 03:56:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:08 Set channel filter=0.000000e+000 result=40 03:56:08 Config A/D Result=40 03:56:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:08 Get A/D filter: -9.255963e+061 result=40 03:56:08 Get A/D value=-858993460 result=40 03:56:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:08 Aux= 03:56:08 Message to Camera, serial 633 queued 03:56:39 Received message from Master: op=PointingHead serial=640 03:56:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:56:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:56:40 Point started: ret=0 03:56:40 point_skyscan result=0 03:56:40 Check angles 03:56:40 SkyScan query 03:56:41 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.21<-17414 Statuses=0009 0009 03:56:41 Msec=0 True Az=108.99 Ze=-81.21 Az status=0009 Ze status=0009 03:56:41 Check angles 03:56:41 SkyScan query 03:56:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.165<-18811 Statuses=0008 0009 03:56:42 Msec=750 True Az=113.01 Ze=-102.165 Az status=0008 Ze status=0009 03:56:42 Check angles 03:56:42 SkyScan query 03:56:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.525<-20235 Statuses=0008 0009 03:56:42 Msec=1500 True Az=113.01 Ze=-123.525 Az status=0008 Ze status=0009 03:56:43 Check angles 03:56:43 SkyScan query 03:56:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 03:56:43 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 03:56:43 Check angles 03:56:43 SkyScan query 03:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 03:56:44 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 03:56:44 Check angles 03:56:44 SkyScan query 03:56:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 03:56:45 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 03:56:45 Message to Master queued w/err=0: serial=640 error=0 03:56:50 Received message from Master: op=Filter serial=641 03:56:50 Color wheel filter change from 0 to 0 03:56:50 FLIGetFilterPos err=0 currentPosition=0 03:56:50 FLIGetStepsRemaining err=0 RemainingSteps=0 03:56:50 Filter is already there-color wheel unchanged 03:56:50 Received message from Master: op=Shutter serial=642 03:56:50 Shutter LASER open 03:56:50 Received message from Camera: op=State serial=644 03:56:50 GetSingleValue result=40 Value=cccccccc 03:56:50 SkyScan query 03:56:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:56:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:51 Parameters OK 03:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:51 Set A/D data flow result=40 03:56:51 Set A/D channel type result=40 03:56:51 Set A/D encoding result=40 03:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:51 Set channel filter=0.000000e+000 result=40 03:56:51 Config A/D Result=40 03:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:51 Get A/D filter: -9.255963e+061 result=40 03:56:51 Get A/D value=-858993460 result=40 03:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:56:51 Parameters OK 03:56:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:56:51 Set A/D data flow result=40 03:56:51 Set A/D channel type result=40 03:56:51 Set A/D encoding result=40 03:56:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:56:51 Set channel filter=0.000000e+000 result=40 03:56:51 Config A/D Result=40 03:56:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:56:51 Get A/D filter: -9.255963e+061 result=40 03:56:51 Get A/D value=-858993460 result=40 03:56:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:56:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:56:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:56:51 Aux= 03:56:51 Message to Camera, serial 644 queued 03:56:53 Received message from Master: op=Shutter serial=648 03:56:53 Shutter LASER close 03:56:54 Received message from Master: op=PointingHead serial=652 03:56:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 03:56:54 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 03:56:54 Point started: ret=0 03:56:54 point_skyscan result=0 03:56:55 Check angles 03:56:55 SkyScan query 03:56:55 SkyScan query done: ret=0 az=90.105<-6007 ze=157.53<-1498 Statuses=0009 0009 03:56:55 Msec=0 True Az=90.105 Ze=157.53 Az status=0009 Ze status=0009 03:56:55 Check angles 03:56:55 SkyScan query 03:56:56 SkyScan query done: ret=0 az=72.63<-4842 ze=136.575<-2895 Statuses=0009 0009 03:56:56 Msec=750 True Az=72.63 Ze=136.575 Az status=0009 Ze status=0009 03:56:56 Check angles 03:56:56 SkyScan query 03:56:57 SkyScan query done: ret=0 az=54.855<-3657 ze=115.185<-4321 Statuses=0009 0009 03:56:57 Msec=1500 True Az=54.855 Ze=115.185 Az status=0009 Ze status=0009 03:56:57 Check angles 03:56:57 SkyScan query 03:56:58 SkyScan query done: ret=0 az=41.025<-2735 ze=94.245<-5717 Statuses=0009 0009 03:56:58 Msec=2250 True Az=41.025 Ze=94.245 Az status=0009 Ze status=0009 03:56:58 Check angles 03:56:58 SkyScan query 03:56:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 03:56:58 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 03:56:59 Check angles 03:56:59 SkyScan query 03:56:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 03:56:59 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 03:56:59 Check angles 03:56:59 SkyScan query 03:57:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 03:57:00 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 03:57:00 Message to Master queued w/err=0: serial=652 error=0 03:57:05 Received message from Master: op=Filter serial=653 03:57:05 Color wheel filter change from 0 to 0 03:57:05 FLIGetFilterPos err=0 currentPosition=0 03:57:05 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:05 Filter is already there-color wheel unchanged 03:57:05 Received message from Master: op=Shutter serial=654 03:57:05 Shutter LASER close 03:57:05 Received message from Camera: op=State serial=656 03:57:05 GetSingleValue result=40 Value=cccccccc 03:57:05 SkyScan query 03:57:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 03:57:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:06 Parameters OK 03:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:06 Set A/D data flow result=40 03:57:06 Set A/D channel type result=40 03:57:06 Set A/D encoding result=40 03:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:06 Set channel filter=0.000000e+000 result=40 03:57:06 Config A/D Result=40 03:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:06 Get A/D filter: -9.255963e+061 result=40 03:57:06 Get A/D value=-858993460 result=40 03:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:06 Parameters OK 03:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:06 Set A/D data flow result=40 03:57:06 Set A/D channel type result=40 03:57:06 Set A/D encoding result=40 03:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:06 Set channel filter=0.000000e+000 result=40 03:57:06 Config A/D Result=40 03:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:06 Get A/D filter: -9.255963e+061 result=40 03:57:06 Get A/D value=-858993460 result=40 03:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:06 Aux= 03:57:06 Message to Camera, serial 656 queued 03:57:37 Received message from Master: op=PointingHead serial=663 03:57:37 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 03:57:37 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 03:57:37 Point started: ret=0 03:57:37 point_skyscan result=0 03:57:38 Check angles 03:57:38 SkyScan query 03:57:38 SkyScan query done: ret=0 az=64.005<-4267 ze=66.54<-7564 Statuses=0009 0008 03:57:38 Msec=0 True Az=64.005 Ze=66.54 Az status=0009 Ze status=0008 03:57:38 Check angles 03:57:38 SkyScan query 03:57:39 SkyScan query done: ret=0 az=81.915<-5461 ze=66.51<-7566 Statuses=0009 0008 03:57:39 Msec=750 True Az=81.915 Ze=66.51 Az status=0009 Ze status=0008 03:57:39 Check angles 03:57:39 SkyScan query 03:57:40 SkyScan query done: ret=0 az=99.54<-6636 ze=66.495<-7567 Statuses=0009 0008 03:57:40 Msec=1500 True Az=99.54 Ze=66.495 Az status=0009 Ze status=0008 03:57:40 Check angles 03:57:40 SkyScan query 03:57:41 SkyScan query done: ret=0 az=116.91<-7794 ze=66.495<-7567 Statuses=0009 0008 03:57:41 Msec=2250 True Az=116.91 Ze=66.495 Az status=0009 Ze status=0008 03:57:41 Check angles 03:57:41 SkyScan query 03:57:41 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 03:57:41 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 03:57:41 Check angles 03:57:41 SkyScan query 03:57:42 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 03:57:42 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 03:57:42 Check angles 03:57:42 SkyScan query 03:57:43 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 03:57:43 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 03:57:43 Message to Master queued w/err=0: serial=663 error=0 03:57:48 Received message from Master: op=Filter serial=664 03:57:48 Color wheel filter change from 0 to 0 03:57:48 FLIGetFilterPos err=0 currentPosition=0 03:57:48 FLIGetStepsRemaining err=0 RemainingSteps=0 03:57:48 Filter is already there-color wheel unchanged 03:57:48 Received message from Master: op=Shutter serial=665 03:57:48 Shutter LASER close 03:57:48 Received message from Camera: op=State serial=667 03:57:48 GetSingleValue result=40 Value=cccccccc 03:57:48 SkyScan query 03:57:49 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 03:57:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:49 Parameters OK 03:57:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:49 Set A/D data flow result=40 03:57:49 Set A/D channel type result=40 03:57:49 Set A/D encoding result=40 03:57:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:49 Set channel filter=0.000000e+000 result=40 03:57:49 Config A/D Result=40 03:57:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:49 Get A/D filter: -9.255963e+061 result=40 03:57:49 Get A/D value=-858993460 result=40 03:57:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:57:49 Parameters OK 03:57:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:57:49 Set A/D data flow result=40 03:57:49 Set A/D channel type result=40 03:57:49 Set A/D encoding result=40 03:57:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:57:49 Set channel filter=0.000000e+000 result=40 03:57:49 Config A/D Result=40 03:57:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:57:49 Get A/D filter: -9.255963e+061 result=40 03:57:49 Get A/D value=-858993460 result=40 03:57:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:57:49 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:57:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:57:49 Aux= 03:57:49 Message to Camera, serial 667 queued 03:58:19 Received message from Master: op=PointingHead serial=674 03:58:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 03:58:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 03:58:20 Point started: ret=0 03:58:20 point_skyscan result=0 03:58:21 Check angles 03:58:21 SkyScan query 03:58:21 SkyScan query done: ret=0 az=134.61<-8974 ze=36.27<-9582 Statuses=0009 0009 03:58:21 Msec=0 True Az=134.61 Ze=36.27 Az status=0009 Ze status=0009 03:58:21 Check angles 03:58:21 SkyScan query 03:58:22 SkyScan query done: ret=0 az=117.06<-7804 ze=15.33<-10978 Statuses=0009 0009 03:58:22 Msec=750 True Az=117.06 Ze=15.33 Az status=0009 Ze status=0009 03:58:22 Check angles 03:58:22 SkyScan query 03:58:23 SkyScan query done: ret=0 az=99.39<-6626 ze=-6.075<-12405 Statuses=0009 0009 03:58:23 Msec=1500 True Az=99.39 Ze=-6.075 Az status=0009 Ze status=0009 03:58:23 Check angles 03:58:23 SkyScan query 03:58:23 SkyScan query done: ret=0 az=81.945<-5463 ze=-27.03<-13802 Statuses=0009 0009 03:58:23 Msec=2250 True Az=81.945 Ze=-27.03 Az status=0009 Ze status=0009 03:58:24 Check angles 03:58:24 SkyScan query 03:58:24 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.565<-14571 Statuses=0009 0008 03:58:24 Msec=3000 True Az=64.515 Ze=-38.565 Az status=0009 Ze status=0008 03:58:24 Check angles 03:58:24 SkyScan query 03:58:25 SkyScan query done: ret=0 az=47.01<-3134 ze=-38.535<-14569 Statuses=0009 0008 03:58:25 Msec=3750 True Az=47.01 Ze=-38.535 Az status=0009 Ze status=0008 03:58:25 Check angles 03:58:25 SkyScan query 03:58:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:58:26 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 03:58:26 Message to Master queued w/err=0: serial=674 error=0 03:58:31 Received message from Master: op=Filter serial=675 03:58:31 Color wheel filter change from 0 to 0 03:58:31 FLIGetFilterPos err=0 currentPosition=0 03:58:31 FLIGetStepsRemaining err=0 RemainingSteps=0 03:58:31 Filter is already there-color wheel unchanged 03:58:31 Received message from Master: op=Shutter serial=676 03:58:31 Shutter LASER close 03:58:31 Received message from Camera: op=State serial=678 03:58:31 GetSingleValue result=40 Value=cccccccc 03:58:31 SkyScan query 03:58:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 03:58:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:31 Parameters OK 03:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:31 Set A/D data flow result=40 03:58:31 Set A/D channel type result=40 03:58:31 Set A/D encoding result=40 03:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:31 Set channel filter=0.000000e+000 result=40 03:58:31 Config A/D Result=40 03:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:31 Get A/D filter: -9.255963e+061 result=40 03:58:31 Get A/D value=-858993460 result=40 03:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:58:31 Parameters OK 03:58:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:58:31 Set A/D data flow result=40 03:58:31 Set A/D channel type result=40 03:58:31 Set A/D encoding result=40 03:58:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:58:31 Set channel filter=0.000000e+000 result=40 03:58:31 Config A/D Result=40 03:58:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:58:31 Get A/D filter: -9.255963e+061 result=40 03:58:31 Get A/D value=-858993460 result=40 03:58:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:58:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:58:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:58:31 Aux= 03:58:31 Message to Camera, serial 678 queued 03:59:02 Received message from Master: op=PointingHead serial=685 03:59:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 03:59:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 03:59:03 Point started: ret=0 03:59:03 point_skyscan result=0 03:59:03 Check angles 03:59:03 SkyScan query 03:59:04 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.43<-16562 Statuses=0009 0009 03:59:04 Msec=0 True Az=63.99 Ze=-68.43 Az status=0009 Ze status=0009 03:59:04 Check angles 03:59:04 SkyScan query 03:59:05 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.82<-17988 Statuses=0009 0009 03:59:05 Msec=750 True Az=82.05 Ze=-89.82 Az status=0009 Ze status=0009 03:59:05 Check angles 03:59:05 SkyScan query 03:59:05 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.775<-19385 Statuses=0009 0009 03:59:05 Msec=1500 True Az=99.51 Ze=-110.775 Az status=0009 Ze status=0009 03:59:06 Check angles 03:59:06 SkyScan query 03:59:06 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.715<-20781 Statuses=0009 0009 03:59:06 Msec=2250 True Az=116.955 Ze=-131.715 Az status=0009 Ze status=0009 03:59:06 Check angles 03:59:06 SkyScan query 03:59:07 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 03:59:07 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 03:59:07 Check angles 03:59:07 SkyScan query 03:59:08 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 03:59:08 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 03:59:08 Message to Master queued w/err=0: serial=685 error=0 03:59:13 Received message from Master: op=Filter serial=686 03:59:13 Color wheel filter change from 0 to 0 03:59:13 FLIGetFilterPos err=0 currentPosition=0 03:59:13 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:13 Filter is already there-color wheel unchanged 03:59:13 Received message from Master: op=Shutter serial=687 03:59:13 Shutter LASER close 03:59:13 Received message from Camera: op=State serial=689 03:59:13 GetSingleValue result=40 Value=cccccccc 03:59:13 SkyScan query 03:59:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 03:59:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:14 Parameters OK 03:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:14 Set A/D data flow result=40 03:59:14 Set A/D channel type result=40 03:59:14 Set A/D encoding result=40 03:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:14 Set channel filter=0.000000e+000 result=40 03:59:14 Config A/D Result=40 03:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:14 Get A/D filter: -9.255963e+061 result=40 03:59:14 Get A/D value=-858993460 result=40 03:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:14 Parameters OK 03:59:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:14 Set A/D data flow result=40 03:59:14 Set A/D channel type result=40 03:59:14 Set A/D encoding result=40 03:59:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:14 Set channel filter=0.000000e+000 result=40 03:59:14 Config A/D Result=40 03:59:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:14 Get A/D filter: -9.255963e+061 result=40 03:59:14 Get A/D value=-858993460 result=40 03:59:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:14 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:14 Aux= 03:59:14 Message to Camera, serial 689 queued 03:59:44 Received message from Master: op=PointingHead serial=696 03:59:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 03:59:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 03:59:45 Point started: ret=0 03:59:45 point_skyscan result=0 03:59:45 Check angles 03:59:45 SkyScan query 03:59:46 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.97<-23398 Statuses=0009 0009 03:59:46 Msec=0 True Az=113.025 Ze=-170.97 Az status=0009 Ze status=0009 03:59:46 Check angles 03:59:46 SkyScan query 03:59:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 03:59:47 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 03:59:47 Message to Master queued w/err=0: serial=696 error=0 03:59:52 Received message from Master: op=Filter serial=697 03:59:52 Color wheel filter change from 0 to 0 03:59:52 FLIGetFilterPos err=0 currentPosition=0 03:59:52 FLIGetStepsRemaining err=0 RemainingSteps=0 03:59:52 Filter is already there-color wheel unchanged 03:59:52 Received message from Master: op=Shutter serial=698 03:59:52 Shutter LASER open 03:59:52 Received message from Camera: op=State serial=700 03:59:52 GetSingleValue result=40 Value=cccccccc 03:59:52 SkyScan query 03:59:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 03:59:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:53 Parameters OK 03:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:53 Set A/D data flow result=40 03:59:53 Set A/D channel type result=40 03:59:53 Set A/D encoding result=40 03:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:53 Set channel filter=0.000000e+000 result=40 03:59:53 Config A/D Result=40 03:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:53 Get A/D filter: -9.255963e+061 result=40 03:59:53 Get A/D value=-858993460 result=40 03:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 03:59:53 Parameters OK 03:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 03:59:53 Set A/D data flow result=40 03:59:53 Set A/D channel type result=40 03:59:53 Set A/D encoding result=40 03:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 03:59:53 Set channel filter=0.000000e+000 result=40 03:59:53 Config A/D Result=40 03:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 03:59:53 Get A/D filter: -9.255963e+061 result=40 03:59:53 Get A/D value=-858993460 result=40 03:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 03:59:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 03:59:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 03:59:53 Aux= 03:59:53 Message to Camera, serial 700 queued 03:59:55 Received message from Master: op=Shutter serial=704 03:59:55 Shutter LASER close 03:59:56 Received message from Master: op=PointingHead serial=708 03:59:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 03:59:56 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 03:59:56 Point started: ret=0 03:59:56 point_skyscan result=0 03:59:57 Check angles 03:59:57 SkyScan query 03:59:57 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.055<-21537 Statuses=0009 0009 03:59:57 Msec=0 True Az=135.99 Ze=-143.055 Az status=0009 Ze status=0009 03:59:58 Check angles 03:59:58 SkyScan query 03:59:58 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.085<-20139 Statuses=0009 0009 03:59:58 Msec=750 True Az=153.615 Ze=-122.085 Az status=0009 Ze status=0009 03:59:58 Check angles 03:59:58 SkyScan query 03:59:59 SkyScan query done: ret=0 az=171<-11400 ze=-101.175<-18745 Statuses=0009 0009 03:59:59 Msec=1500 True Az=171 Ze=-101.175 Az status=0009 Ze status=0009 03:59:59 Check angles 03:59:59 SkyScan query 04:00:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.205<-17347 Statuses=0008 0009 04:00:00 Msec=2250 True Az=176.01 Ze=-80.205 Az status=0008 Ze status=0009 04:00:00 Check angles 04:00:00 SkyScan query 04:00:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 04:00:00 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 04:00:01 Check angles 04:00:01 SkyScan query 04:00:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:00:01 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:00:01 Message to Master queued w/err=0: serial=708 error=0 04:00:06 Received message from Master: op=Filter serial=709 04:00:06 Color wheel filter change from 0 to 0 04:00:06 FLIGetFilterPos err=0 currentPosition=0 04:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:06 Filter is already there-color wheel unchanged 04:00:06 Received message from Master: op=Shutter serial=710 04:00:06 Shutter LASER close 04:00:07 Received message from Camera: op=State serial=712 04:00:07 GetSingleValue result=40 Value=cccccccc 04:00:07 SkyScan query 04:00:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:07 Parameters OK 04:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:07 Set A/D data flow result=40 04:00:07 Set A/D channel type result=40 04:00:07 Set A/D encoding result=40 04:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:07 Set channel filter=0.000000e+000 result=40 04:00:07 Config A/D Result=40 04:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:07 Get A/D filter: -9.255963e+061 result=40 04:00:07 Get A/D value=-858993460 result=40 04:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:07 Parameters OK 04:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:07 Set A/D data flow result=40 04:00:07 Set A/D channel type result=40 04:00:07 Set A/D encoding result=40 04:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:07 Set channel filter=0.000000e+000 result=40 04:00:07 Config A/D Result=40 04:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:07 Get A/D filter: -9.255963e+061 result=40 04:00:07 Get A/D value=-858993460 result=40 04:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:07 Aux= 04:00:07 Message to Camera, serial 712 queued 04:00:38 Received message from Master: op=PointingHead serial=719 04:00:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:00:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:00:38 Point started: ret=0 04:00:38 point_skyscan result=0 04:00:39 Check angles 04:00:39 SkyScan query 04:00:40 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.005<-13467 Statuses=0009 0009 04:00:40 Msec=0 True Az=153.225 Ze=-22.005 Az status=0009 Ze status=0009 04:00:40 Check angles 04:00:40 SkyScan query 04:00:40 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.615<-12041 Statuses=0009 0009 04:00:40 Msec=750 True Az=135.345 Ze=-0.615 Az status=0009 Ze status=0009 04:00:41 Check angles 04:00:41 SkyScan query 04:00:41 SkyScan query done: ret=0 az=117.78<-7852 ze=20.34<-10644 Statuses=0009 0009 04:00:41 Msec=1500 True Az=117.78 Ze=20.34 Az status=0009 Ze status=0009 04:00:41 Check angles 04:00:41 SkyScan query 04:00:42 SkyScan query done: ret=0 az=100.38<-6692 ze=41.31<-9246 Statuses=0009 0009 04:00:42 Msec=2250 True Az=100.38 Ze=41.31 Az status=0009 Ze status=0009 04:00:42 Check angles 04:00:42 SkyScan query 04:00:43 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 04:00:43 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 04:00:43 Check angles 04:00:43 SkyScan query 04:00:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:00:43 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:00:43 Message to Master queued w/err=0: serial=719 error=0 04:00:48 Received message from Master: op=Filter serial=720 04:00:48 Color wheel filter change from 0 to 0 04:00:48 FLIGetFilterPos err=0 currentPosition=0 04:00:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:00:48 Filter is already there-color wheel unchanged 04:00:49 Received message from Master: op=Shutter serial=721 04:00:49 Shutter LASER close 04:00:49 Received message from Camera: op=State serial=723 04:00:49 GetSingleValue result=40 Value=cccccccc 04:00:49 SkyScan query 04:00:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:00:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:49 Parameters OK 04:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 [UTC 2018-12-4 04:00:49] 04:00:49 Set A/D data flow result=40 04:00:49 Set A/D channel type result=40 04:00:49 Set A/D encoding result=40 04:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:49 Set channel filter=0.000000e+000 result=40 04:00:49 Config A/D Result=40 04:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:49 Get A/D filter: -9.255963e+061 result=40 04:00:49 Get A/D value=-858993460 result=40 04:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:00:49 Parameters OK 04:00:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:00:49 Set A/D data flow result=40 04:00:49 Set A/D channel type result=40 04:00:49 Set A/D encoding result=40 04:00:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:00:49 Set channel filter=0.000000e+000 result=40 04:00:49 Config A/D Result=40 04:00:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:00:49 Get A/D filter: -9.255963e+061 result=40 04:00:49 Get A/D value=-858993460 result=40 04:00:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:00:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:00:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:00:49 Aux= 04:00:49 Message to Camera, serial 723 queued 04:01:20 Received message from Master: op=PointingHead serial=730 04:01:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:01:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:01:20 Point started: ret=0 04:01:20 point_skyscan result=0 04:01:21 Check angles 04:01:21 SkyScan query 04:01:22 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 04:01:22 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 04:01:22 Check angles 04:01:22 SkyScan query 04:01:23 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 04:01:23 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 04:01:23 Check angles 04:01:23 SkyScan query 04:01:23 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 04:01:23 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 04:01:23 Check angles 04:01:23 SkyScan query 04:01:24 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 04:01:24 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 04:01:24 Check angles 04:01:24 SkyScan query 04:01:25 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:01:25 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:01:25 Check angles 04:01:25 SkyScan query 04:01:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:01:26 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:01:26 Message to Master queued w/err=0: serial=730 error=0 04:01:31 Received message from Master: op=Filter serial=731 04:01:31 Color wheel filter change from 0 to 0 04:01:31 FLIGetFilterPos err=0 currentPosition=0 04:01:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:01:31 Filter is already there-color wheel unchanged 04:01:31 Received message from Master: op=Shutter serial=732 04:01:31 Shutter LASER close 04:01:31 Received message from Camera: op=State serial=734 04:01:31 GetSingleValue result=40 Value=cccccccc 04:01:31 SkyScan query 04:01:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:01:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:31 Parameters OK 04:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:31 Set A/D data flow result=40 04:01:31 Set A/D channel type result=40 04:01:31 Set A/D encoding result=40 04:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:31 Set channel filter=0.000000e+000 result=40 04:01:31 Config A/D Result=40 04:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:31 Get A/D filter: -9.255963e+061 result=40 04:01:31 Get A/D value=-858993460 result=40 04:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:01:31 Parameters OK 04:01:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:01:31 Set A/D data flow result=40 04:01:31 Set A/D channel type result=40 04:01:31 Set A/D encoding result=40 04:01:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:01:31 Set channel filter=0.000000e+000 result=40 04:01:31 Config A/D Result=40 04:01:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:01:31 Get A/D filter: -9.255963e+061 result=40 04:01:31 Get A/D value=-858993460 result=40 04:01:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:01:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:01:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:01:31 Aux= 04:01:31 Message to Camera, serial 734 queued 04:02:02 Received message from Master: op=PointingHead serial=741 04:02:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:02:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:02:03 Point started: ret=0 04:02:03 point_skyscan result=0 04:02:03 Check angles 04:02:03 SkyScan query 04:02:04 SkyScan query done: ret=0 az=152.67<-10178 ze=8.25<-11450 Statuses=0009 0009 04:02:04 Msec=0 True Az=152.67 Ze=8.25 Az status=0009 Ze status=0009 04:02:04 Check angles 04:02:04 SkyScan query 04:02:05 SkyScan query done: ret=0 az=134.655<-8977 ze=-13.14<-12876 Statuses=0009 0009 04:02:05 Msec=750 True Az=134.655 Ze=-13.14 Az status=0009 Ze status=0009 04:02:05 Check angles 04:02:05 SkyScan query 04:02:05 SkyScan query done: ret=0 az=117.105<-7807 ze=-34.53<-14302 Statuses=0009 0009 04:02:05 Msec=1500 True Az=117.105 Ze=-34.53 Az status=0009 Ze status=0009 04:02:06 Check angles 04:02:06 SkyScan query 04:02:06 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.555<-15437 Statuses=0009 0009 04:02:06 Msec=2250 True Az=99.93 Ze=-51.555 Az status=0009 Ze status=0009 04:02:06 Check angles 04:02:06 SkyScan query 04:02:07 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:02:07 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:02:07 Check angles 04:02:07 SkyScan query 04:02:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:02:08 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:02:08 Message to Master queued w/err=0: serial=741 error=0 04:02:13 Received message from Master: op=Filter serial=742 04:02:13 Color wheel filter change from 0 to 0 04:02:13 FLIGetFilterPos err=0 currentPosition=0 04:02:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:13 Filter is already there-color wheel unchanged 04:02:13 Received message from Master: op=Shutter serial=743 04:02:13 Shutter LASER close 04:02:13 Received message from Camera: op=State serial=745 04:02:13 GetSingleValue result=40 Value=cccccccc 04:02:13 SkyScan query 04:02:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:02:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:13 Parameters OK 04:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:13 Set A/D data flow result=40 04:02:13 Set A/D channel type result=40 04:02:13 Set A/D encoding result=40 04:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:13 Set channel filter=0.000000e+000 result=40 04:02:13 Config A/D Result=40 04:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:13 Get A/D filter: -9.255963e+061 result=40 04:02:13 Get A/D value=-858993460 result=40 04:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:13 Parameters OK 04:02:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:13 Set A/D data flow result=40 04:02:13 Set A/D channel type result=40 04:02:13 Set A/D encoding result=40 04:02:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:13 Set channel filter=0.000000e+000 result=40 04:02:13 Config A/D Result=40 04:02:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:13 Get A/D filter: -9.255963e+061 result=40 04:02:13 Get A/D value=-858993460 result=40 04:02:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:13 Aux= 04:02:13 Message to Camera, serial 745 queued 04:02:44 Received message from Master: op=PointingHead serial=752 04:02:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:02:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:02:45 Point started: ret=0 04:02:45 point_skyscan result=0 04:02:45 Check angles 04:02:45 SkyScan query 04:02:46 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.465<-17431 Statuses=0009 0009 04:02:46 Msec=0 True Az=109.155 Ze=-81.465 Az status=0009 Ze status=0009 04:02:46 Check angles 04:02:46 SkyScan query 04:02:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.42<-18828 Statuses=0008 0009 04:02:47 Msec=750 True Az=113.01 Ze=-102.42 Az status=0008 Ze status=0009 04:02:47 Check angles 04:02:47 SkyScan query 04:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 04:02:48 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 04:02:48 Check angles 04:02:48 SkyScan query 04:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 04:02:48 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 04:02:48 Check angles 04:02:48 SkyScan query 04:02:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 04:02:49 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 04:02:49 Check angles 04:02:49 SkyScan query 04:02:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:02:50 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:02:50 Message to Master queued w/err=0: serial=752 error=0 04:02:55 Received message from Master: op=Filter serial=753 04:02:55 Color wheel filter change from 0 to 0 04:02:55 FLIGetFilterPos err=0 currentPosition=0 04:02:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:02:55 Filter is already there-color wheel unchanged 04:02:55 Received message from Master: op=Shutter serial=754 04:02:55 Shutter LASER open 04:02:55 Received message from Camera: op=State serial=756 04:02:55 GetSingleValue result=40 Value=cccccccc 04:02:55 SkyScan query 04:02:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:02:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:56 Parameters OK 04:02:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:56 Set A/D data flow result=40 04:02:56 Set A/D channel type result=40 04:02:56 Set A/D encoding result=40 04:02:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:56 Set channel filter=0.000000e+000 result=40 04:02:56 Config A/D Result=40 04:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:56 Get A/D filter: -9.255963e+061 result=40 04:02:56 Get A/D value=-858993460 result=40 04:02:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:02:56 Parameters OK 04:02:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:02:56 Set A/D data flow result=40 04:02:56 Set A/D channel type result=40 04:02:56 Set A/D encoding result=40 04:02:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:02:56 Set channel filter=0.000000e+000 result=40 04:02:56 Config A/D Result=40 04:02:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:02:56 Get A/D filter: -9.255963e+061 result=40 04:02:56 Get A/D value=-858993460 result=40 04:02:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:02:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:02:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:02:56 Aux= 04:02:56 Message to Camera, serial 756 queued 04:02:58 Received message from Master: op=Shutter serial=760 04:02:58 Shutter LASER close 04:02:59 Received message from Master: op=PointingHead serial=764 04:02:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:02:59 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:02:59 Point started: ret=0 04:02:59 point_skyscan result=0 04:03:00 Check angles 04:03:00 SkyScan query 04:03:00 SkyScan query done: ret=0 az=90.12<-6008 ze=157.38<-1508 Statuses=0009 0009 04:03:00 Msec=0 True Az=90.12 Ze=157.38 Az status=0009 Ze status=0009 04:03:00 Check angles 04:03:00 SkyScan query 04:03:01 SkyScan query done: ret=0 az=72.15<-4810 ze=136.005<-2933 Statuses=0009 0009 04:03:01 Msec=750 True Az=72.15 Ze=136.005 Az status=0009 Ze status=0009 04:03:01 Check angles 04:03:01 SkyScan query 04:03:02 SkyScan query done: ret=0 az=54.765<-3651 ze=115.065<-4329 Statuses=0009 0009 04:03:02 Msec=1500 True Az=54.765 Ze=115.065 Az status=0009 Ze status=0009 04:03:02 Check angles 04:03:02 SkyScan query 04:03:03 SkyScan query done: ret=0 az=41.01<-2734 ze=94.095<-5727 Statuses=0009 0009 04:03:03 Msec=2250 True Az=41.01 Ze=94.095 Az status=0009 Ze status=0009 04:03:03 Check angles 04:03:03 SkyScan query 04:03:03 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 04:03:03 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 04:03:03 Check angles 04:03:03 SkyScan query 04:03:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 04:03:04 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 04:03:04 Check angles 04:03:04 SkyScan query 04:03:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:03:05 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:03:05 Message to Master queued w/err=0: serial=764 error=0 04:03:10 Received message from Master: op=Filter serial=765 04:03:10 Color wheel filter change from 0 to 0 04:03:10 FLIGetFilterPos err=0 currentPosition=0 04:03:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:10 Filter is already there-color wheel unchanged 04:03:10 Received message from Master: op=Shutter serial=766 04:03:10 Shutter LASER close 04:03:10 Received message from Camera: op=State serial=768 04:03:10 GetSingleValue result=40 Value=cccccccc 04:03:10 SkyScan query 04:03:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:11 Parameters OK 04:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:11 Set A/D data flow result=40 04:03:11 Set A/D channel type result=40 04:03:11 Set A/D encoding result=40 04:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:11 Set channel filter=0.000000e+000 result=40 04:03:11 Config A/D Result=40 04:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:11 Get A/D filter: -9.255963e+061 result=40 04:03:11 Get A/D value=-858993460 result=40 04:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:11 Parameters OK 04:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:11 Set A/D data flow result=40 04:03:11 Set A/D channel type result=40 04:03:11 Set A/D encoding result=40 04:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:11 Set channel filter=0.000000e+000 result=40 04:03:11 Config A/D Result=40 04:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:11 Get A/D filter: -9.255963e+061 result=40 04:03:11 Get A/D value=-858993460 result=40 04:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:11 Aux= 04:03:11 Message to Camera, serial 768 queued 04:03:42 Received message from Master: op=PointingHead serial=775 04:03:42 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:03:42 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:03:42 Point started: ret=0 04:03:42 point_skyscan result=0 04:03:43 Check angles 04:03:43 SkyScan query 04:03:43 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 04:03:43 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 04:03:43 Check angles 04:03:43 SkyScan query 04:03:44 SkyScan query done: ret=0 az=81.24<-5416 ze=66.51<-7566 Statuses=0009 0008 04:03:44 Msec=750 True Az=81.24 Ze=66.51 Az status=0009 Ze status=0008 04:03:44 Check angles 04:03:44 SkyScan query 04:03:45 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 04:03:45 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 04:03:45 Check angles 04:03:45 SkyScan query 04:03:46 SkyScan query done: ret=0 az=117.105<-7807 ze=66.495<-7567 Statuses=0009 0008 04:03:46 Msec=2250 True Az=117.105 Ze=66.495 Az status=0009 Ze status=0008 04:03:46 Check angles 04:03:46 SkyScan query 04:03:46 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 04:03:46 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 04:03:46 Check angles 04:03:46 SkyScan query 04:03:47 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 04:03:47 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 04:03:47 Check angles 04:03:47 SkyScan query 04:03:48 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:03:48 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:03:48 Message to Master queued w/err=0: serial=775 error=0 04:03:53 Received message from Master: op=Filter serial=776 04:03:53 Color wheel filter change from 0 to 0 04:03:53 FLIGetFilterPos err=0 currentPosition=0 04:03:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:03:53 Filter is already there-color wheel unchanged 04:03:53 Received message from Master: op=Shutter serial=777 04:03:53 Shutter LASER close 04:03:53 Received message from Camera: op=State serial=779 04:03:53 GetSingleValue result=40 Value=cccccccc 04:03:53 SkyScan query 04:03:54 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:03:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:54 Parameters OK 04:03:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:54 Set A/D data flow result=40 04:03:54 Set A/D channel type result=40 04:03:54 Set A/D encoding result=40 04:03:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:54 Set channel filter=0.000000e+000 result=40 04:03:54 Config A/D Result=40 04:03:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:54 Get A/D filter: -9.255963e+061 result=40 04:03:54 Get A/D value=-858993460 result=40 04:03:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:03:54 Parameters OK 04:03:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:03:54 Set A/D data flow result=40 04:03:54 Set A/D channel type result=40 04:03:54 Set A/D encoding result=40 04:03:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:03:54 Set channel filter=0.000000e+000 result=40 04:03:54 Config A/D Result=40 04:03:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:03:54 Get A/D filter: -9.255963e+061 result=40 04:03:54 Get A/D value=-858993460 result=40 04:03:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:03:54 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:03:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:03:54 Aux= 04:03:54 Message to Camera, serial 779 queued 04:04:24 Received message from Master: op=PointingHead serial=786 04:04:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:04:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:04:25 Point started: ret=0 04:04:25 point_skyscan result=0 04:04:25 Check angles 04:04:25 SkyScan query 04:04:26 SkyScan query done: ret=0 az=135.165<-9011 ze=36.84<-9544 Statuses=0009 0009 04:04:26 Msec=0 True Az=135.165 Ze=36.84 Az status=0009 Ze status=0009 04:04:26 Check angles 04:04:26 SkyScan query 04:04:27 SkyScan query done: ret=0 az=117.585<-7839 ze=15.87<-10942 Statuses=0009 0009 04:04:27 Msec=750 True Az=117.585 Ze=15.87 Az status=0009 Ze status=0009 04:04:27 Check angles 04:04:27 SkyScan query 04:04:28 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.085<-12339 Statuses=0009 0009 04:04:28 Msec=1500 True Az=100.245 Ze=-5.085 Az status=0009 Ze status=0009 04:04:28 Check angles 04:04:28 SkyScan query 04:04:28 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.055<-13737 Statuses=0009 0009 04:04:28 Msec=2250 True Az=82.725 Ze=-26.055 Az status=0009 Ze status=0009 04:04:28 Check angles 04:04:28 SkyScan query 04:04:29 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.55<-14570 Statuses=0009 0008 04:04:29 Msec=3000 True Az=65.28 Ze=-38.55 Az status=0009 Ze status=0008 04:04:29 Check angles 04:04:29 SkyScan query 04:04:30 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.535<-14569 Statuses=0009 0008 04:04:30 Msec=3750 True Az=47.805 Ze=-38.535 Az status=0009 Ze status=0008 04:04:30 Check angles 04:04:30 SkyScan query 04:04:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:04:31 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:04:31 Message to Master queued w/err=0: serial=786 error=0 04:04:36 Received message from Master: op=Filter serial=787 04:04:36 Color wheel filter change from 0 to 0 04:04:36 FLIGetFilterPos err=0 currentPosition=0 04:04:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:04:36 Filter is already there-color wheel unchanged 04:04:36 Received message from Master: op=Shutter serial=788 04:04:36 Shutter LASER close 04:04:36 Received message from Camera: op=State serial=790 04:04:36 GetSingleValue result=40 Value=cccccccc 04:04:36 SkyScan query 04:04:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:04:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:36 Parameters OK 04:04:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:36 Set A/D data flow result=40 04:04:36 Set A/D channel type result=40 04:04:36 Set A/D encoding result=40 04:04:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:36 Set channel filter=0.000000e+000 result=40 04:04:36 Config A/D Result=40 04:04:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:36 Get A/D filter: -9.255963e+061 result=40 04:04:36 Get A/D value=-858993460 result=40 04:04:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:04:36 Parameters OK 04:04:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:04:36 Set A/D data flow result=40 04:04:36 Set A/D channel type result=40 04:04:36 Set A/D encoding result=40 04:04:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:04:36 Set channel filter=0.000000e+000 result=40 04:04:36 Config A/D Result=40 04:04:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:04:36 Get A/D filter: -9.255963e+061 result=40 04:04:36 Get A/D value=-858993460 result=40 04:04:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:04:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:04:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:04:36 Aux= 04:04:36 Message to Camera, serial 790 queued 04:05:07 Received message from Master: op=PointingHead serial=797 04:05:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:05:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:05:08 Point started: ret=0 04:05:08 point_skyscan result=0 04:05:08 Check angles 04:05:08 SkyScan query 04:05:09 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.01<-16534 Statuses=0009 0009 04:05:09 Msec=0 True Az=63.795 Ze=-68.01 Az status=0009 Ze status=0009 04:05:09 Check angles 04:05:09 SkyScan query 04:05:10 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.01<-17934 Statuses=0009 0009 04:05:10 Msec=750 True Az=81.3 Ze=-89.01 Az status=0009 Ze status=0009 04:05:10 Check angles 04:05:10 SkyScan query 04:05:10 SkyScan query done: ret=0 az=98.925<-6595 ze=-109.95<-19330 Statuses=0009 0009 04:05:10 Msec=1500 True Az=98.925 Ze=-109.95 Az status=0009 Ze status=0009 04:05:11 Check angles 04:05:11 SkyScan query 04:05:11 SkyScan query done: ret=0 az=116.595<-7773 ze=-131.385<-20759 Statuses=0009 0009 04:05:11 Msec=2250 True Az=116.595 Ze=-131.385 Az status=0009 Ze status=0009 04:05:11 Check angles 04:05:11 SkyScan query 04:05:12 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 04:05:12 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 04:05:12 Check angles 04:05:12 SkyScan query 04:05:13 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:05:13 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:05:13 Message to Master queued w/err=0: serial=797 error=0 04:05:18 Received message from Master: op=Filter serial=798 04:05:18 Color wheel filter change from 0 to 0 04:05:18 FLIGetFilterPos err=0 currentPosition=0 04:05:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:18 Filter is already there-color wheel unchanged 04:05:18 Received message from Master: op=Shutter serial=799 04:05:18 Shutter LASER close 04:05:18 Received message from Camera: op=State serial=801 04:05:18 GetSingleValue result=40 Value=cccccccc 04:05:18 SkyScan query 04:05:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:05:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:18 Parameters OK 04:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:18 Set A/D data flow result=40 04:05:18 Set A/D channel type result=40 04:05:18 Set A/D encoding result=40 04:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:18 Set channel filter=0.000000e+000 result=40 04:05:18 Config A/D Result=40 04:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:18 Get A/D filter: -9.255963e+061 result=40 04:05:18 Get A/D value=-858993460 result=40 04:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:18 Parameters OK 04:05:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:18 Set A/D data flow result=40 04:05:18 Set A/D channel type result=40 04:05:18 Set A/D encoding result=40 04:05:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:18 Set channel filter=0.000000e+000 result=40 04:05:18 Config A/D Result=40 04:05:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:18 Get A/D filter: -9.255963e+061 result=40 04:05:18 Get A/D value=-858993460 result=40 04:05:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:18 Aux= 04:05:18 Message to Camera, serial 801 queued 04:05:49 Received message from Master: op=PointingHead serial=808 04:05:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:05:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:05:50 Point started: ret=0 04:05:50 point_skyscan result=0 04:05:50 Check angles 04:05:50 SkyScan query 04:05:51 SkyScan query done: ret=0 az=113.025<-7535 ze=-171<-23400 Statuses=0009 0009 04:05:51 Msec=0 True Az=113.025 Ze=-171 Az status=0009 Ze status=0009 04:05:51 Check angles 04:05:51 SkyScan query 04:05:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:05:52 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:05:52 Message to Master queued w/err=0: serial=808 error=0 04:05:57 Received message from Master: op=Filter serial=809 04:05:57 Color wheel filter change from 0 to 0 04:05:57 FLIGetFilterPos err=0 currentPosition=0 04:05:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:05:57 Filter is already there-color wheel unchanged 04:05:57 Received message from Master: op=Shutter serial=810 04:05:57 Shutter LASER open 04:05:57 Received message from Camera: op=State serial=812 04:05:57 GetSingleValue result=40 Value=cccccccc 04:05:57 SkyScan query 04:05:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:58 Parameters OK 04:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:58 Set A/D data flow result=40 04:05:58 Set A/D channel type result=40 04:05:58 Set A/D encoding result=40 04:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:58 Set channel filter=0.000000e+000 result=40 04:05:58 Config A/D Result=40 04:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:58 Get A/D filter: -9.255963e+061 result=40 04:05:58 Get A/D value=-858993460 result=40 04:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:05:58 Parameters OK 04:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:05:58 Set A/D data flow result=40 04:05:58 Set A/D channel type result=40 04:05:58 Set A/D encoding result=40 04:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:05:58 Set channel filter=0.000000e+000 result=40 04:05:58 Config A/D Result=40 04:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:05:58 Get A/D filter: -9.255963e+061 result=40 04:05:58 Get A/D value=-858993460 result=40 04:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:05:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:05:58 Aux= 04:05:58 Message to Camera, serial 812 queued 04:06:00 Received message from Master: op=Shutter serial=816 04:06:00 Shutter LASER close 04:06:01 Received message from Master: op=PointingHead serial=820 04:06:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:06:01 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:06:01 Point started: ret=0 04:06:01 point_skyscan result=0 04:06:02 Check angles 04:06:02 SkyScan query 04:06:02 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.43<-21562 Statuses=0009 0009 04:06:02 Msec=0 True Az=135.75 Ze=-143.43 Az status=0009 Ze status=0009 04:06:03 Check angles 04:06:03 SkyScan query 04:06:03 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.01<-20134 Statuses=0009 0009 04:06:03 Msec=750 True Az=153.675 Ze=-122.01 Az status=0009 Ze status=0009 04:06:03 Check angles 04:06:03 SkyScan query 04:06:04 SkyScan query done: ret=0 az=171.09<-11406 ze=-101.1<-18740 Statuses=0009 0009 04:06:04 Msec=1500 True Az=171.09 Ze=-101.1 Az status=0009 Ze status=0009 04:06:04 Check angles 04:06:04 SkyScan query 04:06:05 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.145<-17343 Statuses=0008 0009 04:06:05 Msec=2250 True Az=176.025 Ze=-80.145 Az status=0008 Ze status=0009 04:06:05 Check angles 04:06:05 SkyScan query 04:06:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.725<-15915 Statuses=0008 0009 04:06:05 Msec=3000 True Az=175.995 Ze=-58.725 Az status=0008 Ze status=0009 04:06:06 Check angles 04:06:06 SkyScan query 04:06:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:06:06 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:06:06 Message to Master queued w/err=0: serial=820 error=0 04:06:11 Received message from Master: op=Filter serial=821 04:06:11 Color wheel filter change from 0 to 0 04:06:11 FLIGetFilterPos err=0 currentPosition=0 04:06:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:11 Filter is already there-color wheel unchanged 04:06:11 Received message from Master: op=Shutter serial=822 04:06:11 Shutter LASER close 04:06:11 Received message from Camera: op=State serial=824 04:06:11 GetSingleValue result=40 Value=cccccccc 04:06:11 SkyScan query 04:06:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:06:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:12 Parameters OK 04:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:12 Set A/D data flow result=40 04:06:12 Set A/D channel type result=40 04:06:12 Set A/D encoding result=40 04:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:12 Set channel filter=0.000000e+000 result=40 04:06:12 Config A/D Result=40 04:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:12 Get A/D filter: -9.255963e+061 result=40 04:06:12 Get A/D value=-858993460 result=40 04:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:12 Parameters OK 04:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:12 Set A/D data flow result=40 04:06:12 Set A/D channel type result=40 04:06:12 Set A/D encoding result=40 04:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:12 Set channel filter=0.000000e+000 result=40 04:06:12 Config A/D Result=40 04:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:12 Get A/D filter: -9.255963e+061 result=40 04:06:12 Get A/D value=-858993460 result=40 04:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:12 Aux= 04:06:12 Message to Camera, serial 824 queued 04:06:43 Received message from Master: op=PointingHead serial=831 04:06:43 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:06:43 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:06:43 Point started: ret=0 04:06:43 point_skyscan result=0 04:06:44 Check angles 04:06:44 SkyScan query 04:06:45 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.81<-13454 Statuses=0009 0009 04:06:45 Msec=0 True Az=152.91 Ze=-21.81 Az status=0009 Ze status=0009 04:06:45 Check angles 04:06:45 SkyScan query 04:06:45 SkyScan query done: ret=0 az=135.21<-9014 ze=-0.435<-12029 Statuses=0009 0009 04:06:45 Msec=750 True Az=135.21 Ze=-0.435 Az status=0009 Ze status=0009 04:06:45 Check angles 04:06:45 SkyScan query 04:06:46 SkyScan query done: ret=0 az=117.675<-7845 ze=20.535<-10631 Statuses=0009 0009 04:06:46 Msec=1500 True Az=117.675 Ze=20.535 Az status=0009 Ze status=0009 04:06:46 Check angles 04:06:46 SkyScan query 04:06:47 SkyScan query done: ret=0 az=100.275<-6685 ze=41.49<-9234 Statuses=0009 0009 04:06:47 Msec=2250 True Az=100.275 Ze=41.49 Az status=0009 Ze status=0009 04:06:47 Check angles 04:06:47 SkyScan query 04:06:48 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 04:06:48 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 04:06:48 Check angles 04:06:48 SkyScan query 04:06:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:06:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:06:48 Message to Master queued w/err=0: serial=831 error=0 04:06:53 Received message from Master: op=Filter serial=832 04:06:53 Color wheel filter change from 0 to 0 04:06:53 FLIGetFilterPos err=0 currentPosition=0 04:06:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:06:53 Filter is already there-color wheel unchanged 04:06:53 Received message from Master: op=Shutter serial=833 04:06:53 Shutter LASER close 04:06:54 Received message from Camera: op=State serial=835 04:06:54 GetSingleValue result=40 Value=cccccccc 04:06:54 SkyScan query 04:06:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:06:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:54 Parameters OK 04:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:54 Set A/D data flow result=40 04:06:54 Set A/D channel type result=40 04:06:54 Set A/D encoding result=40 04:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:54 Set channel filter=0.000000e+000 result=40 04:06:54 Config A/D Result=40 04:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:54 Get A/D filter: -9.255963e+061 result=40 04:06:54 Get A/D value=-858993460 result=40 04:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:06:54 Parameters OK 04:06:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:06:54 Set A/D data flow result=40 04:06:54 Set A/D channel type result=40 04:06:54 Set A/D encoding result=40 04:06:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:06:54 Set channel filter=0.000000e+000 result=40 04:06:54 Config A/D Result=40 04:06:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:06:54 Get A/D filter: -9.255963e+061 result=40 04:06:54 Get A/D value=-858993460 result=40 04:06:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:06:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:06:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:06:54 Aux= 04:06:54 Message to Camera, serial 835 queued 04:07:25 Received message from Master: op=PointingHead serial=842 04:07:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:07:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:07:25 Point started: ret=0 04:07:25 point_skyscan result=0 04:07:26 Check angles 04:07:26 SkyScan query 04:07:27 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 04:07:27 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 04:07:27 Check angles 04:07:27 SkyScan query 04:07:27 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 04:07:27 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 04:07:28 Check angles 04:07:28 SkyScan query 04:07:28 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 04:07:28 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 04:07:28 Check angles 04:07:28 SkyScan query 04:07:29 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 04:07:29 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 04:07:29 Check angles 04:07:29 SkyScan query 04:07:30 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:07:30 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:07:30 Check angles 04:07:30 SkyScan query 04:07:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:07:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:07:30 Message to Master queued w/err=0: serial=842 error=0 04:07:35 Received message from Master: op=Filter serial=843 04:07:35 Color wheel filter change from 0 to 0 04:07:35 FLIGetFilterPos err=0 currentPosition=0 04:07:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:07:35 Filter is already there-color wheel unchanged 04:07:36 Received message from Master: op=Shutter serial=844 04:07:36 Shutter LASER close 04:07:36 Received message from Camera: op=State serial=846 04:07:36 GetSingleValue result=40 Value=cccccccc 04:07:36 SkyScan query 04:07:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:07:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:36 Parameters OK 04:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:36 Set A/D data flow result=40 04:07:36 Set A/D channel type result=40 04:07:36 Set A/D encoding result=40 04:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:36 Set channel filter=0.000000e+000 result=40 04:07:36 Config A/D Result=40 04:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:36 Get A/D filter: -9.255963e+061 result=40 04:07:36 Get A/D value=-858993460 result=40 04:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:07:36 Parameters OK 04:07:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:07:36 Set A/D data flow result=40 04:07:36 Set A/D channel type result=40 04:07:36 Set A/D encoding result=40 04:07:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:07:36 Set channel filter=0.000000e+000 result=40 04:07:36 Config A/D Result=40 04:07:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:07:36 Get A/D filter: -9.255963e+061 result=40 04:07:36 Get A/D value=-858993460 result=40 04:07:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:07:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:07:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:07:36 Aux= 04:07:36 Message to Camera, serial 846 queued 04:08:07 Received message from Master: op=PointingHead serial=853 04:08:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:08:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:08:07 Point started: ret=0 04:08:07 point_skyscan result=0 04:08:08 Check angles 04:08:08 SkyScan query 04:08:09 SkyScan query done: ret=0 az=152.985<-10199 ze=8.61<-11426 Statuses=0009 0009 04:08:09 Msec=0 True Az=152.985 Ze=8.61 Az status=0009 Ze status=0009 04:08:09 Check angles 04:08:09 SkyScan query 04:08:10 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.3<-12820 Statuses=0009 0009 04:08:10 Msec=750 True Az=135.465 Ze=-12.3 Az status=0009 Ze status=0009 04:08:10 Check angles 04:08:10 SkyScan query 04:08:10 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.285<-14219 Statuses=0009 0009 04:08:10 Msec=1500 True Az=118.035 Ze=-33.285 Az status=0009 Ze status=0009 04:08:10 Check angles 04:08:10 SkyScan query 04:08:11 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 04:08:11 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 04:08:11 Check angles 04:08:11 SkyScan query 04:08:12 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 04:08:12 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 04:08:12 Check angles 04:08:12 SkyScan query 04:08:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:08:13 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:08:13 Message to Master queued w/err=0: serial=853 error=0 04:08:18 Received message from Master: op=Filter serial=854 04:08:18 Color wheel filter change from 0 to 0 04:08:18 FLIGetFilterPos err=0 currentPosition=0 04:08:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:08:18 Filter is already there-color wheel unchanged 04:08:18 Received message from Master: op=Shutter serial=855 04:08:18 Shutter LASER close 04:08:18 Received message from Camera: op=State serial=857 04:08:18 GetSingleValue result=40 Value=cccccccc 04:08:18 SkyScan query 04:08:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:08:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:18 Parameters OK 04:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:18 Set A/D data flow result=40 04:08:18 Set A/D channel type result=40 04:08:18 Set A/D encoding result=40 04:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:18 Set channel filter=0.000000e+000 result=40 04:08:18 Config A/D Result=40 04:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:18 Get A/D filter: -9.255963e+061 result=40 04:08:18 Get A/D value=-858993460 result=40 04:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:08:18 Parameters OK 04:08:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:08:18 Set A/D data flow result=40 04:08:18 Set A/D channel type result=40 04:08:18 Set A/D encoding result=40 04:08:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:08:18 Set channel filter=0.000000e+000 result=40 04:08:18 Config A/D Result=40 04:08:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:08:18 Get A/D filter: -9.255963e+061 result=40 04:08:18 Get A/D value=-858993460 result=40 04:08:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:08:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:08:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:08:18 Aux= 04:08:18 Message to Camera, serial 857 queued 04:08:49 Received message from Master: op=PointingHead serial=864 04:08:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:08:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:08:50 Point started: ret=0 04:08:50 point_skyscan result=0 04:08:50 Check angles 04:08:50 SkyScan query 04:08:51 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.315<-17421 Statuses=0009 0009 04:08:51 Msec=0 True Az=109.02 Ze=-81.315 Az status=0009 Ze status=0009 04:08:51 Check angles 04:08:51 SkyScan query 04:08:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.72<-18848 Statuses=0008 0009 04:08:52 Msec=750 True Az=113.01 Ze=-102.72 Az status=0008 Ze status=0009 04:08:52 Check angles 04:08:52 SkyScan query 04:08:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.11<-20274 Statuses=0008 0009 04:08:52 Msec=1500 True Az=113.01 Ze=-124.11 Az status=0008 Ze status=0009 04:08:53 Check angles 04:08:53 SkyScan query 04:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 04:08:53 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 04:08:53 Check angles 04:08:53 SkyScan query 04:08:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 04:08:54 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 04:08:54 Check angles 04:08:54 SkyScan query 04:08:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:08:55 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:08:55 Message to Master queued w/err=0: serial=864 error=0 04:09:00 Received message from Master: op=Filter serial=865 04:09:00 Color wheel filter change from 0 to 0 04:09:00 FLIGetFilterPos err=0 currentPosition=0 04:09:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:00 Filter is already there-color wheel unchanged 04:09:00 Received message from Master: op=Shutter serial=866 04:09:00 Shutter LASER open 04:09:00 Received message from Camera: op=State serial=868 04:09:00 GetSingleValue result=40 Value=cccccccc 04:09:00 SkyScan query 04:09:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:09:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:01 Parameters OK 04:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:01 Set A/D data flow result=40 04:09:01 Set A/D channel type result=40 04:09:01 Set A/D encoding result=40 04:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:01 Set channel filter=0.000000e+000 result=40 04:09:01 Config A/D Result=40 04:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:01 Get A/D filter: -9.255963e+061 result=40 04:09:01 Get A/D value=-858993460 result=40 04:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:01 Parameters OK 04:09:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:01 Set A/D data flow result=40 04:09:01 Set A/D channel type result=40 04:09:01 Set A/D encoding result=40 04:09:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:01 Set channel filter=0.000000e+000 result=40 04:09:01 Config A/D Result=40 04:09:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:01 Get A/D filter: -9.255963e+061 result=40 04:09:01 Get A/D value=-858993460 result=40 04:09:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:01 Aux= 04:09:01 Message to Camera, serial 868 queued 04:09:03 Received message from Master: op=Shutter serial=872 04:09:03 Shutter LASER close 04:09:03 Received message from Master: op=PointingHead serial=876 04:09:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:09:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:09:04 Point started: ret=0 04:09:04 point_skyscan result=0 04:09:05 Check angles 04:09:05 SkyScan query 04:09:05 SkyScan query done: ret=0 az=90.255<-6017 ze=157.53<-1498 Statuses=0009 0009 04:09:05 Msec=0 True Az=90.255 Ze=157.53 Az status=0009 Ze status=0009 04:09:05 Check angles 04:09:05 SkyScan query 04:09:06 SkyScan query done: ret=0 az=72.39<-4826 ze=136.125<-2925 Statuses=0009 0009 04:09:06 Msec=750 True Az=72.39 Ze=136.125 Az status=0009 Ze status=0009 04:09:06 Check angles 04:09:06 SkyScan query 04:09:07 SkyScan query done: ret=0 az=54.93<-3662 ze=115.2<-4320 Statuses=0009 0009 04:09:07 Msec=1500 True Az=54.93 Ze=115.2 Az status=0009 Ze status=0009 04:09:07 Check angles 04:09:07 SkyScan query 04:09:07 SkyScan query done: ret=0 az=40.875<-2725 ze=94.2<-5720 Statuses=0009 0009 04:09:07 Msec=2250 True Az=40.875 Ze=94.2 Az status=0009 Ze status=0009 04:09:08 Check angles 04:09:08 SkyScan query 04:09:08 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 04:09:08 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 04:09:08 Check angles 04:09:08 SkyScan query 04:09:09 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 04:09:09 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 04:09:09 Check angles 04:09:09 SkyScan query 04:09:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:09:10 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:09:10 Message to Master queued w/err=0: serial=876 error=0 04:09:15 Received message from Master: op=Filter serial=877 04:09:15 Color wheel filter change from 0 to 0 04:09:15 FLIGetFilterPos err=0 currentPosition=0 04:09:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:15 Filter is already there-color wheel unchanged 04:09:15 Received message from Master: op=Shutter serial=878 04:09:15 Shutter LASER close 04:09:15 Received message from Camera: op=State serial=880 04:09:15 GetSingleValue result=40 Value=cccccccc 04:09:15 SkyScan query 04:09:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:09:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:16 Parameters OK [UTC 2018-12-4 04:09:16] 04:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:16 Set A/D data flow result=40 04:09:16 Set A/D channel type result=40 04:09:16 Set A/D encoding result=40 04:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:16 Set channel filter=0.000000e+000 result=40 04:09:16 Config A/D Result=40 04:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:16 Get A/D filter: -9.255963e+061 result=40 04:09:16 Get A/D value=-858993460 result=40 04:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:16 Parameters OK 04:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:16 Set A/D data flow result=40 04:09:16 Set A/D channel type result=40 04:09:16 Set A/D encoding result=40 04:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:16 Set channel filter=0.000000e+000 result=40 04:09:16 Config A/D Result=40 04:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:16 Get A/D filter: -9.255963e+061 result=40 04:09:16 Get A/D value=-858993460 result=40 04:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:16 Aux= 04:09:16 Message to Camera, serial 880 queued 04:09:46 Received message from Master: op=PointingHead serial=887 04:09:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:09:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:09:47 Point started: ret=0 04:09:47 point_skyscan result=0 04:09:47 Check angles 04:09:47 SkyScan query 04:09:48 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 04:09:48 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 04:09:48 Check angles 04:09:48 SkyScan query 04:09:49 SkyScan query done: ret=0 az=81.315<-5421 ze=66.495<-7567 Statuses=0009 0008 04:09:49 Msec=750 True Az=81.315 Ze=66.495 Az status=0009 Ze status=0008 04:09:49 Check angles 04:09:49 SkyScan query 04:09:50 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 04:09:50 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 04:09:50 Check angles 04:09:50 SkyScan query 04:09:50 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 04:09:50 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 04:09:50 Check angles 04:09:50 SkyScan query 04:09:51 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 04:09:51 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 04:09:51 Check angles 04:09:51 SkyScan query 04:09:52 SkyScan query done: ret=0 az=151.215<-10081 ze=66.495<-7567 Statuses=0009 0008 04:09:52 Msec=3750 True Az=151.215 Ze=66.495 Az status=0009 Ze status=0008 04:09:52 Check angles 04:09:52 SkyScan query 04:09:53 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:09:53 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:09:53 Message to Master queued w/err=0: serial=887 error=0 04:09:58 Received message from Master: op=Filter serial=888 04:09:58 Color wheel filter change from 0 to 0 04:09:58 FLIGetFilterPos err=0 currentPosition=0 04:09:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:09:58 Filter is already there-color wheel unchanged 04:09:58 Received message from Master: op=Shutter serial=889 04:09:58 Shutter LASER close 04:09:58 Received message from Camera: op=State serial=891 04:09:58 GetSingleValue result=40 Value=cccccccc 04:09:58 SkyScan query 04:09:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:09:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:58 Parameters OK 04:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:58 Set A/D data flow result=40 04:09:58 Set A/D channel type result=40 04:09:58 Set A/D encoding result=40 04:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:58 Set channel filter=0.000000e+000 result=40 04:09:58 Config A/D Result=40 04:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:58 Get A/D filter: -9.255963e+061 result=40 04:09:58 Get A/D value=-858993460 result=40 04:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:09:58 Parameters OK 04:09:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:09:58 Set A/D data flow result=40 04:09:58 Set A/D channel type result=40 04:09:58 Set A/D encoding result=40 04:09:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:09:58 Set channel filter=0.000000e+000 result=40 04:09:58 Config A/D Result=40 04:09:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:09:58 Get A/D filter: -9.255963e+061 result=40 04:09:58 Get A/D value=-858993460 result=40 04:09:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:09:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:09:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:09:58 Aux= 04:09:58 Message to Camera, serial 891 queued 04:10:29 Received message from Master: op=PointingHead serial=898 04:10:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:10:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:10:30 Point started: ret=0 04:10:30 point_skyscan result=0 04:10:30 Check angles 04:10:30 SkyScan query 04:10:31 SkyScan query done: ret=0 az=135.015<-9001 ze=36.72<-9552 Statuses=0009 0009 04:10:31 Msec=0 True Az=135.015 Ze=36.72 Az status=0009 Ze status=0009 04:10:31 Check angles 04:10:31 SkyScan query 04:10:32 SkyScan query done: ret=0 az=117.09<-7806 ze=15.315<-10979 Statuses=0009 0009 04:10:32 Msec=750 True Az=117.09 Ze=15.315 Az status=0009 Ze status=0009 04:10:32 Check angles 04:10:32 SkyScan query 04:10:32 SkyScan query done: ret=0 az=99.15<-6610 ze=-6.51<-12434 Statuses=0009 0009 04:10:32 Msec=1500 True Az=99.15 Ze=-6.51 Az status=0009 Ze status=0009 04:10:33 Check angles 04:10:33 SkyScan query 04:10:33 SkyScan query done: ret=0 az=81.945<-5463 ze=-27.06<-13804 Statuses=0009 0009 04:10:33 Msec=2250 True Az=81.945 Ze=-27.06 Az status=0009 Ze status=0009 04:10:33 Check angles 04:10:33 SkyScan query 04:10:34 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.565<-14571 Statuses=0009 0008 04:10:34 Msec=3000 True Az=64.425 Ze=-38.565 Az status=0009 Ze status=0008 04:10:34 Check angles 04:10:34 SkyScan query 04:10:35 SkyScan query done: ret=0 az=47.01<-3134 ze=-38.52<-14568 Statuses=0009 0008 04:10:35 Msec=3750 True Az=47.01 Ze=-38.52 Az status=0009 Ze status=0008 04:10:35 Check angles 04:10:35 SkyScan query 04:10:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:10:35 Message to Master queued w/err=0: serial=898 error=0 04:10:40 Received message from Master: op=Filter serial=899 04:10:40 Color wheel filter change from 0 to 0 04:10:40 FLIGetFilterPos err=0 currentPosition=0 04:10:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:10:40 Filter is already there-color wheel unchanged 04:10:41 Received message from Master: op=Shutter serial=900 04:10:41 Shutter LASER close 04:10:41 Received message from Camera: op=State serial=902 04:10:41 GetSingleValue result=40 Value=cccccccc 04:10:41 SkyScan query 04:10:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:10:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:41 Parameters OK 04:10:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:41 Set A/D data flow result=40 04:10:41 Set A/D channel type result=40 04:10:41 Set A/D encoding result=40 04:10:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:41 Set channel filter=0.000000e+000 result=40 04:10:41 Config A/D Result=40 04:10:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:41 Get A/D filter: -9.255963e+061 result=40 04:10:41 Get A/D value=-858993460 result=40 04:10:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:10:41 Parameters OK 04:10:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:10:41 Set A/D data flow result=40 04:10:41 Set A/D channel type result=40 04:10:41 Set A/D encoding result=40 04:10:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:10:41 Set channel filter=0.000000e+000 result=40 04:10:41 Config A/D Result=40 04:10:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:10:41 Get A/D filter: -9.255963e+061 result=40 04:10:41 Get A/D value=-858993460 result=40 04:10:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:10:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:10:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:10:41 Aux= 04:10:41 Message to Camera, serial 902 queued 04:11:12 Received message from Master: op=PointingHead serial=909 04:11:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:11:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:11:12 Point started: ret=0 04:11:12 point_skyscan result=0 04:11:13 Check angles 04:11:13 SkyScan query 04:11:14 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.505<-16567 Statuses=0009 0009 04:11:14 Msec=0 True Az=64.02 Ze=-68.505 Az status=0009 Ze status=0009 04:11:14 Check angles 04:11:14 SkyScan query 04:11:14 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.49<-17966 Statuses=0009 0009 04:11:14 Msec=750 True Az=81.66 Ze=-89.49 Az status=0009 Ze status=0009 04:11:15 Check angles 04:11:15 SkyScan query 04:11:15 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.415<-19361 Statuses=0009 0009 04:11:15 Msec=1500 True Az=99.195 Ze=-110.415 Az status=0009 Ze status=0009 04:11:15 Check angles 04:11:15 SkyScan query 04:11:16 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.37<-20758 Statuses=0009 0009 04:11:16 Msec=2250 True Az=116.55 Ze=-131.37 Az status=0009 Ze status=0009 04:11:16 Check angles 04:11:16 SkyScan query 04:11:17 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 04:11:17 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 04:11:17 Check angles 04:11:17 SkyScan query 04:11:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:11:17 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:11:17 Message to Master queued w/err=0: serial=909 error=0 04:11:22 Received message from Master: op=Filter serial=910 04:11:22 Color wheel filter change from 0 to 0 04:11:22 FLIGetFilterPos err=0 currentPosition=0 04:11:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:11:22 Filter is already there-color wheel unchanged 04:11:23 Received message from Master: op=Shutter serial=911 04:11:23 Shutter LASER close 04:11:23 Received message from Camera: op=State serial=913 04:11:23 GetSingleValue result=40 Value=cccccccc 04:11:23 SkyScan query 04:11:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:11:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:23 Parameters OK 04:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:23 Set A/D data flow result=40 04:11:23 Set A/D channel type result=40 04:11:23 Set A/D encoding result=40 04:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:23 Set channel filter=0.000000e+000 result=40 04:11:23 Config A/D Result=40 04:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:23 Get A/D filter: -9.255963e+061 result=40 04:11:23 Get A/D value=-858993460 result=40 04:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:11:23 Parameters OK 04:11:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:11:23 Set A/D data flow result=40 04:11:23 Set A/D channel type result=40 04:11:23 Set A/D encoding result=40 04:11:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:11:23 Set channel filter=0.000000e+000 result=40 04:11:23 Config A/D Result=40 04:11:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:11:23 Get A/D filter: -9.255963e+061 result=40 04:11:23 Get A/D value=-858993460 result=40 04:11:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:11:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:11:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:11:23 Aux= 04:11:23 Message to Camera, serial 913 queued 04:11:54 Received message from Master: op=PointingHead serial=920 04:11:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:11:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:11:54 Point started: ret=0 04:11:54 point_skyscan result=0 04:11:55 Check angles 04:11:55 SkyScan query 04:11:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 04:11:56 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 04:11:56 Check angles 04:11:56 SkyScan query 04:11:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:11:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:11:57 Message to Master queued w/err=0: serial=920 error=0 04:12:02 Received message from Master: op=Filter serial=921 04:12:02 Color wheel filter change from 0 to 0 04:12:02 FLIGetFilterPos err=0 currentPosition=0 04:12:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:02 Filter is already there-color wheel unchanged 04:12:02 Received message from Master: op=Shutter serial=922 04:12:02 Shutter LASER open 04:12:02 Received message from Camera: op=State serial=924 04:12:02 GetSingleValue result=40 Value=cccccccc 04:12:02 SkyScan query 04:12:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:12:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:03 Parameters OK 04:12:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:03 Set A/D data flow result=40 04:12:03 Set A/D channel type result=40 04:12:03 Set A/D encoding result=40 04:12:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:03 Set channel filter=0.000000e+000 result=40 04:12:03 Config A/D Result=40 04:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:03 Get A/D filter: -9.255963e+061 result=40 04:12:03 Get A/D value=-858993460 result=40 04:12:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:03 Parameters OK 04:12:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:03 Set A/D data flow result=40 04:12:03 Set A/D channel type result=40 04:12:03 Set A/D encoding result=40 04:12:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:03 Set channel filter=0.000000e+000 result=40 04:12:03 Config A/D Result=40 04:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:03 Get A/D filter: -9.255963e+061 result=40 04:12:03 Get A/D value=-858993460 result=40 04:12:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:03 Aux= 04:12:03 Message to Camera, serial 924 queued 04:12:05 Received message from Master: op=Shutter serial=928 04:12:05 Shutter LASER close 04:12:06 Received message from Master: op=PointingHead serial=932 04:12:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:12:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:12:06 Point started: ret=0 04:12:06 point_skyscan result=0 04:12:07 Check angles 04:12:07 SkyScan query 04:12:07 SkyScan query done: ret=0 az=136.05<-9070 ze=-143.19<-21546 Statuses=0009 0009 04:12:07 Msec=0 True Az=136.05 Ze=-143.19 Az status=0009 Ze status=0009 04:12:07 Check angles 04:12:07 SkyScan query 04:12:08 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.785<-20119 Statuses=0009 0009 04:12:08 Msec=750 True Az=153.885 Ze=-121.785 Az status=0009 Ze status=0009 04:12:08 Check angles 04:12:08 SkyScan query 04:12:09 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.38<-18692 Statuses=0009 0009 04:12:09 Msec=1500 True Az=171.705 Ze=-100.38 Az status=0009 Ze status=0009 [UTC 2018-12-4 04:12:09] 04:12:09 Check angles 04:12:09 SkyScan query 04:12:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.425<-17295 Statuses=0008 0009 04:12:09 Msec=2250 True Az=176.025 Ze=-79.425 Az status=0008 Ze status=0009 04:12:10 Check angles 04:12:10 SkyScan query 04:12:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.455<-15897 Statuses=0008 0009 04:12:10 Msec=3000 True Az=176.01 Ze=-58.455 Az status=0008 Ze status=0009 04:12:10 Check angles 04:12:10 SkyScan query 04:12:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:12:11 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:12:11 Message to Master queued w/err=0: serial=932 error=0 04:12:16 Received message from Master: op=Filter serial=933 04:12:16 Color wheel filter change from 0 to 0 04:12:16 FLIGetFilterPos err=0 currentPosition=0 04:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:16 Filter is already there-color wheel unchanged 04:12:16 Received message from Master: op=Shutter serial=934 04:12:16 Shutter LASER close 04:12:16 Received message from Camera: op=State serial=936 04:12:16 GetSingleValue result=40 Value=cccccccc 04:12:16 SkyScan query 04:12:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:17 Parameters OK 04:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:17 Set A/D data flow result=40 04:12:17 Set A/D channel type result=40 04:12:17 Set A/D encoding result=40 04:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:17 Set channel filter=0.000000e+000 result=40 04:12:17 Config A/D Result=40 04:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:17 Get A/D filter: -9.255963e+061 result=40 04:12:17 Get A/D value=-858993460 result=40 04:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:17 Parameters OK 04:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:17 Set A/D data flow result=40 04:12:17 Set A/D channel type result=40 04:12:17 Set A/D encoding result=40 04:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:17 Set channel filter=0.000000e+000 result=40 04:12:17 Config A/D Result=40 04:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:17 Get A/D filter: -9.255963e+061 result=40 04:12:17 Get A/D value=-858993460 result=40 04:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:17 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:17 Aux= 04:12:17 Message to Camera, serial 936 queued 04:12:48 Received message from Master: op=PointingHead serial=943 04:12:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:12:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:12:48 Point started: ret=0 04:12:48 point_skyscan result=0 04:12:49 Check angles 04:12:49 SkyScan query 04:12:49 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.915<-13461 Statuses=0009 0009 04:12:49 Msec=0 True Az=153.12 Ze=-21.915 Az status=0009 Ze status=0009 04:12:50 Check angles 04:12:50 SkyScan query 04:12:50 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.525<-12035 Statuses=0009 0009 04:12:50 Msec=750 True Az=135.315 Ze=-0.525 Az status=0009 Ze status=0009 04:12:50 Check angles 04:12:50 SkyScan query 04:12:51 SkyScan query done: ret=0 az=117.42<-7828 ze=20.85<-10610 Statuses=0009 0009 04:12:51 Msec=1500 True Az=117.42 Ze=20.85 Az status=0009 Ze status=0009 04:12:51 Check angles 04:12:51 SkyScan query 04:12:52 SkyScan query done: ret=0 az=99.66<-6644 ze=42.255<-9183 Statuses=0009 0009 04:12:52 Msec=2250 True Az=99.66 Ze=42.255 Az status=0009 Ze status=0009 04:12:52 Check angles 04:12:52 SkyScan query 04:12:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:12:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:12:53 Check angles 04:12:53 SkyScan query 04:12:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:12:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:12:53 Message to Master queued w/err=0: serial=943 error=0 04:12:58 Received message from Master: op=Filter serial=944 04:12:58 Color wheel filter change from 0 to 0 04:12:58 FLIGetFilterPos err=0 currentPosition=0 04:12:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:12:58 Filter is already there-color wheel unchanged 04:12:58 Received message from Master: op=Shutter serial=945 04:12:58 Shutter LASER close 04:12:58 Received message from Camera: op=State serial=947 04:12:58 GetSingleValue result=40 Value=cccccccc 04:12:58 SkyScan query 04:12:59 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:12:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:59 Parameters OK 04:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:59 Set A/D data flow result=40 04:12:59 Set A/D channel type result=40 04:12:59 Set A/D encoding result=40 04:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:59 Set channel filter=0.000000e+000 result=40 04:12:59 Config A/D Result=40 04:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:59 Get A/D filter: -9.255963e+061 result=40 04:12:59 Get A/D value=-858993460 result=40 04:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:12:59 Parameters OK 04:12:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:12:59 Set A/D data flow result=40 04:12:59 Set A/D channel type result=40 04:12:59 Set A/D encoding result=40 04:12:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:12:59 Set channel filter=0.000000e+000 result=40 04:12:59 Config A/D Result=40 04:12:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:12:59 Get A/D filter: -9.255963e+061 result=40 04:12:59 Get A/D value=-858993460 result=40 04:12:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:12:59 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:12:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:12:59 Aux= 04:12:59 Message to Camera, serial 947 queued 04:13:30 Received message from Master: op=PointingHead serial=954 04:13:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:13:30 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:13:30 Point started: ret=0 04:13:30 point_skyscan result=0 04:13:31 Check angles 04:13:31 SkyScan query 04:13:32 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 04:13:32 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 04:13:32 Check angles 04:13:32 SkyScan query 04:13:32 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 04:13:32 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 04:13:33 Check angles 04:13:33 SkyScan query 04:13:33 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 04:13:33 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 04:13:33 Check angles 04:13:33 SkyScan query 04:13:34 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 04:13:34 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 04:13:34 Check angles 04:13:34 SkyScan query 04:13:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:13:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:13:35 Check angles 04:13:35 SkyScan query 04:13:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:13:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:13:35 Message to Master queued w/err=0: serial=954 error=0 04:13:40 Received message from Master: op=Filter serial=955 04:13:40 Color wheel filter change from 0 to 0 04:13:40 FLIGetFilterPos err=0 currentPosition=0 04:13:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:13:40 Filter is already there-color wheel unchanged 04:13:41 Received message from Master: op=Shutter serial=956 04:13:41 Shutter LASER close 04:13:41 Received message from Camera: op=State serial=958 04:13:41 GetSingleValue result=40 Value=cccccccc 04:13:41 SkyScan query 04:13:41 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:13:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:41 Parameters OK 04:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:41 Set A/D data flow result=40 04:13:41 Set A/D channel type result=40 04:13:41 Set A/D encoding result=40 04:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:41 Set channel filter=0.000000e+000 result=40 04:13:41 Config A/D Result=40 04:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:41 Get A/D filter: -9.255963e+061 result=40 04:13:41 Get A/D value=-858993460 result=40 04:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:13:41 Parameters OK 04:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:13:41 Set A/D data flow result=40 04:13:41 Set A/D channel type result=40 04:13:41 Set A/D encoding result=40 04:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:13:41 Set channel filter=0.000000e+000 result=40 04:13:41 Config A/D Result=40 04:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:13:41 Get A/D filter: -9.255963e+061 result=40 04:13:41 Get A/D value=-858993460 result=40 04:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:13:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:13:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:13:41 Aux= 04:13:41 Message to Camera, serial 958 queued 04:14:12 Received message from Master: op=PointingHead serial=965 04:14:12 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:14:12 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:14:12 Point started: ret=0 04:14:12 point_skyscan result=0 04:14:13 Check angles 04:14:13 SkyScan query 04:14:14 SkyScan query done: ret=0 az=153.24<-10216 ze=8.94<-11404 Statuses=0009 0009 04:14:14 Msec=0 True Az=153.24 Ze=8.94 Az status=0009 Ze status=0009 04:14:14 Check angles 04:14:14 SkyScan query 04:14:14 SkyScan query done: ret=0 az=135.795<-9053 ze=-12<-12800 Statuses=0009 0009 04:14:14 Msec=750 True Az=135.795 Ze=-12 Az status=0009 Ze status=0009 04:14:15 Check angles 04:14:15 SkyScan query 04:14:15 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.97<-14198 Statuses=0009 0009 04:14:15 Msec=1500 True Az=118.26 Ze=-32.97 Az status=0009 Ze status=0009 04:14:15 Check angles 04:14:15 SkyScan query 04:14:16 SkyScan query done: ret=0 az=100.815<-6721 ze=-51.495<-15433 Statuses=0009 0009 04:14:16 Msec=2250 True Az=100.815 Ze=-51.495 Az status=0009 Ze status=0009 04:14:16 Check angles 04:14:16 SkyScan query 04:14:17 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:14:17 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:14:17 Check angles 04:14:17 SkyScan query 04:14:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:14:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:14:17 Message to Master queued w/err=0: serial=965 error=0 04:14:22 Received message from Master: op=Filter serial=966 04:14:22 Color wheel filter change from 0 to 0 04:14:22 FLIGetFilterPos err=0 currentPosition=0 04:14:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:14:22 Filter is already there-color wheel unchanged 04:14:23 Received message from Master: op=Shutter serial=967 04:14:23 Shutter LASER close 04:14:23 Received message from Camera: op=State serial=969 04:14:23 GetSingleValue result=40 Value=cccccccc 04:14:23 SkyScan query 04:14:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:14:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:23 Parameters OK 04:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:23 Set A/D data flow result=40 04:14:23 Set A/D channel type result=40 04:14:23 Set A/D encoding result=40 04:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:23 Set channel filter=0.000000e+000 result=40 04:14:23 Config A/D Result=40 04:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:23 Get A/D filter: -9.255963e+061 result=40 04:14:23 Get A/D value=-858993460 result=40 04:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:14:23 Parameters OK 04:14:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:14:23 Set A/D data flow result=40 04:14:23 Set A/D channel type result=40 04:14:23 Set A/D encoding result=40 04:14:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:14:23 Set channel filter=0.000000e+000 result=40 04:14:23 Config A/D Result=40 04:14:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:14:23 Get A/D filter: -9.255963e+061 result=40 04:14:23 Get A/D value=-858993460 result=40 04:14:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:14:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:14:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:14:23 Aux= 04:14:23 Message to Camera, serial 969 queued 04:14:54 Received message from Master: op=PointingHead serial=976 04:14:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:14:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:14:54 Point started: ret=0 04:14:54 point_skyscan result=0 04:14:55 Check angles 04:14:55 SkyScan query 04:14:56 SkyScan query done: ret=0 az=108.78<-7252 ze=-81<-17400 Statuses=0009 0009 04:14:56 Msec=0 True Az=108.78 Ze=-81 Az status=0009 Ze status=0009 04:14:56 Check angles 04:14:56 SkyScan query 04:14:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-101.955<-18797 Statuses=0008 0009 04:14:56 Msec=750 True Az=113.01 Ze=-101.955 Az status=0008 Ze status=0009 04:14:57 Check angles 04:14:57 SkyScan query 04:14:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.925<-20195 Statuses=0008 0009 04:14:57 Msec=1500 True Az=112.995 Ze=-122.925 Az status=0008 Ze status=0009 04:14:57 Check angles 04:14:57 SkyScan query 04:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 04:14:58 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 04:14:58 Check angles 04:14:58 SkyScan query 04:14:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 04:14:59 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 04:14:59 Check angles 04:14:59 SkyScan query 04:15:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:15:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:15:00 Message to Master queued w/err=0: serial=976 error=0 04:15:05 Received message from Master: op=Filter serial=977 04:15:05 Color wheel filter change from 0 to 0 04:15:05 FLIGetFilterPos err=0 currentPosition=0 04:15:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:05 Filter is already there-color wheel unchanged 04:15:05 Received message from Master: op=Shutter serial=978 04:15:05 Shutter LASER open 04:15:05 Received message from Camera: op=State serial=980 04:15:05 GetSingleValue result=40 Value=cccccccc 04:15:05 SkyScan query 04:15:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:15:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:05 Parameters OK 04:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:05 Set A/D data flow result=40 04:15:05 Set A/D channel type result=40 04:15:05 Set A/D encoding result=40 04:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:05 Set channel filter=0.000000e+000 result=40 04:15:05 Config A/D Result=40 04:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:05 Get A/D filter: -9.255963e+061 result=40 04:15:05 Get A/D value=-858993460 result=40 04:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:05 Parameters OK 04:15:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:05 Set A/D data flow result=40 04:15:05 Set A/D channel type result=40 04:15:05 Set A/D encoding result=40 04:15:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:05 Set channel filter=0.000000e+000 result=40 04:15:05 Config A/D Result=40 04:15:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:05 Get A/D filter: -9.255963e+061 result=40 04:15:05 Get A/D value=-858993460 result=40 04:15:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:05 Aux= 04:15:05 Message to Camera, serial 980 queued 04:15:08 Received message from Master: op=Shutter serial=984 04:15:08 Shutter LASER close 04:15:08 Received message from Master: op=PointingHead serial=988 04:15:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:15:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:15:09 Point started: ret=0 04:15:09 point_skyscan result=0 04:15:09 Check angles 04:15:09 SkyScan query 04:15:10 SkyScan query done: ret=0 az=89.64<-5976 ze=156.915<-1539 Statuses=0009 0009 04:15:10 Msec=0 True Az=89.64 Ze=156.915 Az status=0009 Ze status=0009 04:15:10 Check angles 04:15:10 SkyScan query 04:15:11 SkyScan query done: ret=0 az=72.135<-4809 ze=135.945<-2937 Statuses=0009 0009 04:15:11 Msec=750 True Az=72.135 Ze=135.945 Az status=0009 Ze status=0009 04:15:11 Check angles 04:15:11 SkyScan query 04:15:11 SkyScan query done: ret=0 az=54.69<-3646 ze=115.02<-4332 Statuses=0009 0009 04:15:11 Msec=1500 True Az=54.69 Ze=115.02 Az status=0009 Ze status=0009 04:15:12 Check angles 04:15:12 SkyScan query 04:15:12 SkyScan query done: ret=0 az=40.995<-2733 ze=93.615<-5759 Statuses=0009 0009 04:15:12 Msec=2250 True Az=40.995 Ze=93.615 Az status=0009 Ze status=0009 04:15:12 Check angles 04:15:12 SkyScan query 04:15:13 SkyScan query done: ret=0 az=40.995<-2733 ze=72.24<-7184 Statuses=0008 0009 04:15:13 Msec=3000 True Az=40.995 Ze=72.24 Az status=0008 Ze status=0009 04:15:13 Check angles 04:15:13 SkyScan query 04:15:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 04:15:14 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 04:15:14 Check angles 04:15:14 SkyScan query 04:15:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:15:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:15:15 Message to Master queued w/err=0: serial=988 error=0 04:15:20 Received message from Master: op=Filter serial=989 04:15:20 Color wheel filter change from 0 to 0 04:15:20 FLIGetFilterPos err=0 currentPosition=0 04:15:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:15:20 Filter is already there-color wheel unchanged 04:15:20 Received message from Master: op=Shutter serial=990 04:15:20 Shutter LASER close 04:15:20 Received message from Camera: op=State serial=992 04:15:20 GetSingleValue result=40 Value=cccccccc 04:15:20 SkyScan query 04:15:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:15:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:20 Parameters OK 04:15:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:20 Set A/D data flow result=40 04:15:20 Set A/D channel type result=40 04:15:20 Set A/D encoding result=40 04:15:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:20 Set channel filter=0.000000e+000 result=40 04:15:20 Config A/D Result=40 04:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:20 Get A/D filter: -9.255963e+061 result=40 04:15:20 Get A/D value=-858993460 result=40 04:15:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:15:20 Parameters OK 04:15:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:15:20 Set A/D data flow result=40 04:15:20 Set A/D channel type result=40 04:15:20 Set A/D encoding result=40 04:15:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:15:20 Set channel filter=0.000000e+000 result=40 04:15:20 Config A/D Result=40 04:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:15:20 Get A/D filter: -9.255963e+061 result=40 04:15:20 Get A/D value=-858993460 result=40 04:15:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:15:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:15:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:15:20 Aux= 04:15:20 Message to Camera, serial 992 queued 04:15:51 Received message from Master: op=PointingHead serial=999 04:15:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:15:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:15:52 Point started: ret=0 04:15:52 point_skyscan result=0 04:15:52 Check angles 04:15:52 SkyScan query 04:15:53 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 04:15:53 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 04:15:53 Check angles 04:15:53 SkyScan query 04:15:54 SkyScan query done: ret=0 az=81.93<-5462 ze=66.495<-7567 Statuses=0009 0008 04:15:54 Msec=750 True Az=81.93 Ze=66.495 Az status=0009 Ze status=0008 04:15:54 Check angles 04:15:54 SkyScan query 04:15:54 SkyScan query done: ret=0 az=99.375<-6625 ze=66.495<-7567 Statuses=0009 0008 04:15:54 Msec=1500 True Az=99.375 Ze=66.495 Az status=0009 Ze status=0008 04:15:55 Check angles 04:15:55 SkyScan query 04:15:55 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 04:15:55 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 04:15:55 Check angles 04:15:55 SkyScan query 04:15:56 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 04:15:56 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 04:15:56 Check angles 04:15:56 SkyScan query 04:15:57 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 04:15:57 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 04:15:57 Check angles 04:15:57 SkyScan query 04:15:57 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:15:57 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:15:57 Message to Master queued w/err=0: serial=999 error=0 04:16:02 Received message from Master: op=Filter serial=1000 04:16:02 Color wheel filter change from 0 to 0 04:16:02 FLIGetFilterPos err=0 currentPosition=0 04:16:02 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:02 Filter is already there-color wheel unchanged 04:16:03 Received message from Master: op=Shutter serial=1001 04:16:03 Shutter LASER close 04:16:03 Received message from Camera: op=State serial=1003 04:16:03 GetSingleValue result=40 Value=cccccccc 04:16:03 SkyScan query 04:16:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:16:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:03 Parameters OK 04:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:03 Set A/D data flow result=40 04:16:03 Set A/D channel type result=40 04:16:03 Set A/D encoding result=40 04:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:03 Set channel filter=0.000000e+000 result=40 04:16:03 Config A/D Result=40 04:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:03 Get A/D filter: -9.255963e+061 result=40 04:16:03 Get A/D value=-858993460 result=40 04:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:03 Parameters OK 04:16:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:03 Set A/D data flow result=40 04:16:03 Set A/D channel type result=40 04:16:03 Set A/D encoding result=40 04:16:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:03 Set channel filter=0.000000e+000 result=40 04:16:03 Config A/D Result=40 04:16:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:03 Get A/D filter: -9.255963e+061 result=40 04:16:03 Get A/D value=-858993460 result=40 04:16:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:03 Aux= 04:16:03 Message to Camera, serial 1003 queued 04:16:34 Received message from Master: op=PointingHead serial=1010 04:16:34 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:16:34 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:16:34 Point started: ret=0 04:16:34 point_skyscan result=0 04:16:35 Check angles 04:16:35 SkyScan query 04:16:36 SkyScan query done: ret=0 az=134.85<-8990 ze=36.63<-9558 Statuses=0009 0009 04:16:36 Msec=0 True Az=134.85 Ze=36.63 Az status=0009 Ze status=0009 04:16:36 Check angles 04:16:36 SkyScan query 04:16:37 SkyScan query done: ret=0 az=117.3<-7820 ze=15.675<-10955 Statuses=0009 0009 04:16:37 Msec=750 True Az=117.3 Ze=15.675 Az status=0009 Ze status=0009 04:16:37 Check angles 04:16:37 SkyScan query 04:16:37 SkyScan query done: ret=0 az=100.035<-6669 ze=-5.295<-12353 Statuses=0009 0009 04:16:37 Msec=1500 True Az=100.035 Ze=-5.295 Az status=0009 Ze status=0009 04:16:37 Check angles 04:16:37 SkyScan query 04:16:38 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.265<-13751 Statuses=0009 0009 04:16:38 Msec=2250 True Az=82.44 Ze=-26.265 Az status=0009 Ze status=0009 04:16:38 Check angles 04:16:38 SkyScan query 04:16:39 SkyScan query done: ret=0 az=64.95<-4330 ze=-38.565<-14571 Statuses=0009 0008 04:16:39 Msec=3000 True Az=64.95 Ze=-38.565 Az status=0009 Ze status=0008 04:16:39 Check angles 04:16:39 SkyScan query 04:16:40 SkyScan query done: ret=0 az=47.565<-3171 ze=-38.535<-14569 Statuses=0009 0008 04:16:40 Msec=3750 True Az=47.565 Ze=-38.535 Az status=0009 Ze status=0008 04:16:40 Check angles 04:16:40 SkyScan query 04:16:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:16:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:16:40 Message to Master queued w/err=0: serial=1010 error=0 04:16:45 Received message from Master: op=Filter serial=1011 04:16:45 Color wheel filter change from 0 to 0 04:16:45 FLIGetFilterPos err=0 currentPosition=0 04:16:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:16:45 Filter is already there-color wheel unchanged 04:16:45 Received message from Master: op=Shutter serial=1012 04:16:45 Shutter LASER close 04:16:46 Received message from Camera: op=State serial=1014 04:16:46 GetSingleValue result=40 Value=cccccccc 04:16:46 SkyScan query 04:16:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:16:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:46 Parameters OK 04:16:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:46 Set A/D data flow result=40 04:16:46 Set A/D channel type result=40 04:16:46 Set A/D encoding result=40 04:16:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:46 Set channel filter=0.000000e+000 result=40 04:16:46 Config A/D Result=40 04:16:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:46 Get A/D filter: -9.255963e+061 result=40 04:16:46 Get A/D value=-858993460 result=40 04:16:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:16:46 Parameters OK 04:16:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:16:46 Set A/D data flow result=40 04:16:46 Set A/D channel type result=40 04:16:46 Set A/D encoding result=40 04:16:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:16:46 Set channel filter=0.000000e+000 result=40 04:16:46 Config A/D Result=40 04:16:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:16:46 Get A/D filter: -9.255963e+061 result=40 04:16:46 Get A/D value=-858993460 result=40 04:16:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:16:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:16:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:16:46 Aux= 04:16:46 Message to Camera, serial 1014 queued 04:17:17 Received message from Master: op=PointingHead serial=1021 04:17:17 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:17:17 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:17:17 Point started: ret=0 04:17:17 point_skyscan result=0 04:17:18 Check angles 04:17:18 SkyScan query 04:17:19 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.625<-16575 Statuses=0009 0009 04:17:19 Msec=0 True Az=64.17 Ze=-68.625 Az status=0009 Ze status=0009 04:17:19 Check angles 04:17:19 SkyScan query 04:17:19 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.595<-17973 Statuses=0009 0009 04:17:19 Msec=750 True Az=81.84 Ze=-89.595 Az status=0009 Ze status=0009 04:17:20 Check angles 04:17:20 SkyScan query 04:17:20 SkyScan query done: ret=0 az=99.555<-6637 ze=-111<-19400 Statuses=0009 0009 04:17:20 Msec=1500 True Az=99.555 Ze=-111 Az status=0009 Ze status=0009 04:17:20 Check angles 04:17:20 SkyScan query 04:17:21 SkyScan query done: ret=0 az=117<-7800 ze=-131.91<-20794 Statuses=0009 0009 04:17:21 Msec=2250 True Az=117 Ze=-131.91 Az status=0009 Ze status=0009 04:17:21 Check angles 04:17:21 SkyScan query 04:17:22 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 04:17:22 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 04:17:22 Check angles 04:17:22 SkyScan query 04:17:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:17:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:17:22 Message to Master queued w/err=0: serial=1021 error=0 04:17:27 Received message from Master: op=Filter serial=1022 04:17:27 Color wheel filter change from 0 to 0 04:17:27 FLIGetFilterPos err=0 currentPosition=0 04:17:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:17:27 Filter is already there-color wheel unchanged 04:17:28 Received message from Master: op=Shutter serial=1023 04:17:28 Shutter LASER close 04:17:28 Received message from Camera: op=State serial=1025 04:17:28 GetSingleValue result=40 Value=cccccccc 04:17:28 SkyScan query 04:17:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:17:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:28 Parameters OK 04:17:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:28 Set A/D data flow result=40 04:17:28 Set A/D channel type result=40 04:17:28 Set A/D encoding result=40 04:17:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:28 Set channel filter=0.000000e+000 result=40 04:17:28 Config A/D Result=40 04:17:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:28 Get A/D filter: -9.255963e+061 result=40 04:17:28 Get A/D value=-858993460 result=40 04:17:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:17:28 Parameters OK 04:17:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:17:28 Set A/D data flow result=40 04:17:28 Set A/D channel type result=40 04:17:28 Set A/D encoding result=40 04:17:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:17:28 Set channel filter=0.000000e+000 result=40 04:17:28 Config A/D Result=40 04:17:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:17:28 Get A/D filter: -9.255963e+061 result=40 04:17:28 Get A/D value=-858993460 result=40 04:17:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:17:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:17:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:17:28 Aux= 04:17:28 Message to Camera, serial 1025 queued 04:17:59 Received message from Master: op=PointingHead serial=1032 04:17:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:17:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:17:59 Point started: ret=0 04:17:59 point_skyscan result=0 04:18:00 Check angles 04:18:00 SkyScan query 04:18:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 04:18:01 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 04:18:01 Check angles 04:18:01 SkyScan query 04:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:18:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:18:01 Message to Master queued w/err=0: serial=1032 error=0 04:18:06 Received message from Master: op=Filter serial=1033 04:18:06 Color wheel filter change from 0 to 0 04:18:06 FLIGetFilterPos err=0 currentPosition=0 04:18:06 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:06 Filter is already there-color wheel unchanged 04:18:07 Received message from Master: op=Shutter serial=1034 04:18:07 Shutter LASER open 04:18:07 Received message from Camera: op=State serial=1036 04:18:07 GetSingleValue result=40 Value=cccccccc 04:18:07 SkyScan query 04:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:18:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:07 Parameters OK 04:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:07 Set A/D data flow result=40 04:18:07 Set A/D channel type result=40 04:18:07 Set A/D encoding result=40 04:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:07 Set channel filter=0.000000e+000 result=40 04:18:07 Config A/D Result=40 04:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:07 Get A/D filter: -9.255963e+061 result=40 04:18:07 Get A/D value=-858993460 result=40 04:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:07 Parameters OK 04:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:07 Set A/D data flow result=40 04:18:07 Set A/D channel type result=40 04:18:07 Set A/D encoding result=40 04:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:07 Set channel filter=0.000000e+000 result=40 04:18:07 Config A/D Result=40 04:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:07 Get A/D filter: -9.255963e+061 result=40 04:18:07 Get A/D value=-858993460 result=40 04:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:07 Aux= 04:18:07 Message to Camera, serial 1036 queued 04:18:10 Received message from Master: op=Shutter serial=1040 04:18:10 Shutter LASER close 04:18:11 Received message from Master: op=PointingHead serial=1044 04:18:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:18:11 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:18:11 Point started: ret=0 04:18:11 point_skyscan result=0 04:18:12 Check angles 04:18:12 SkyScan query 04:18:12 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.725<-21515 Statuses=0009 0009 04:18:12 Msec=0 True Az=136.395 Ze=-142.725 Az status=0009 Ze status=0009 04:18:12 Check angles 04:18:12 SkyScan query 04:18:13 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.77<-20118 Statuses=0009 0009 04:18:13 Msec=750 True Az=153.915 Ze=-121.77 Az status=0009 Ze status=0009 04:18:13 Check angles 04:18:13 SkyScan query 04:18:14 SkyScan query done: ret=0 az=171.675<-11445 ze=-100.365<-18691 Statuses=0009 0009 04:18:14 Msec=1500 True Az=171.675 Ze=-100.365 Az status=0009 Ze status=0009 04:18:14 Check angles 04:18:14 SkyScan query 04:18:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 04:18:14 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 04:18:15 Check angles 04:18:15 SkyScan query 04:18:15 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.44<-15896 Statuses=0008 0009 04:18:15 Msec=3000 True Az=176.01 Ze=-58.44 Az status=0008 Ze status=0009 04:18:15 Check angles 04:18:15 SkyScan query 04:18:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:18:16 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:18:16 Message to Master queued w/err=0: serial=1044 error=0 04:18:21 Received message from Master: op=Filter serial=1045 04:18:21 Color wheel filter change from 0 to 0 04:18:21 FLIGetFilterPos err=0 currentPosition=0 04:18:21 FLIGetStepsRemaining err=0 RemainingSteps=0 04:18:21 Filter is already there-color wheel unchanged 04:18:21 Received message from Master: op=Shutter serial=1046 04:18:21 Shutter LASER close 04:18:21 Received message from Camera: op=State serial=1048 04:18:21 GetSingleValue result=40 Value=cccccccc 04:18:21 SkyScan query 04:18:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:22 Parameters OK 04:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:22 Set A/D data flow result=40 04:18:22 Set A/D channel type result=40 04:18:22 Set A/D encoding result=40 04:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:22 Set channel filter=0.000000e+000 result=40 04:18:22 Config A/D Result=40 04:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:22 Get A/D filter: -9.255963e+061 result=40 04:18:22 Get A/D value=-858993460 result=40 04:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:18:22 Parameters OK 04:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:18:22 Set A/D data flow result=40 04:18:22 Set A/D channel type result=40 04:18:22 Set A/D encoding result=40 04:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:18:22 Set channel filter=0.000000e+000 result=40 04:18:22 Config A/D Result=40 04:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:18:22 Get A/D filter: -9.255963e+061 result=40 04:18:22 Get A/D value=-858993460 result=40 04:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:18:22 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:18:22 Aux= 04:18:22 Message to Camera, serial 1048 queued 04:18:53 Received message from Master: op=PointingHead serial=1055 04:18:53 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:18:53 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:18:53 Point started: ret=0 04:18:53 point_skyscan result=0 04:18:54 Check angles 04:18:54 SkyScan query 04:18:54 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 04:18:54 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 04:18:55 Check angles 04:18:55 SkyScan query 04:18:55 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.42<-12028 Statuses=0009 0009 04:18:55 Msec=750 True Az=135.3 Ze=-0.42 Az status=0009 Ze status=0009 04:18:55 Check angles 04:18:55 SkyScan query 04:18:56 SkyScan query done: ret=0 az=117.33<-7822 ze=20.97<-10602 Statuses=0009 0009 04:18:56 Msec=1500 True Az=117.33 Ze=20.97 Az status=0009 Ze status=0009 04:18:56 Check angles 04:18:56 SkyScan query 04:18:57 SkyScan query done: ret=0 az=99.945<-6663 ze=41.94<-9204 Statuses=0009 0009 04:18:57 Msec=2250 True Az=99.945 Ze=41.94 Az status=0009 Ze status=0009 04:18:57 Check angles 04:18:57 SkyScan query 04:18:57 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 04:18:57 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 04:18:58 Check angles 04:18:58 SkyScan query 04:18:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:18:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:18:58 Message to Master queued w/err=0: serial=1055 error=0 04:19:03 Received message from Master: op=Filter serial=1056 04:19:03 Color wheel filter change from 0 to 0 04:19:03 FLIGetFilterPos err=0 currentPosition=0 04:19:03 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:03 Filter is already there-color wheel unchanged 04:19:03 Received message from Master: op=Shutter serial=1057 04:19:03 Shutter LASER close 04:19:03 Received message from Camera: op=State serial=1059 04:19:03 GetSingleValue result=40 Value=cccccccc 04:19:03 SkyScan query 04:19:04 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:19:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:04 Parameters OK 04:19:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:04 Set A/D data flow result=40 04:19:04 Set A/D channel type result=40 04:19:04 Set A/D encoding result=40 04:19:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:04 Set channel filter=0.000000e+000 result=40 04:19:04 Config A/D Result=40 04:19:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:04 Get A/D filter: -9.255963e+061 result=40 04:19:04 Get A/D value=-858993460 result=40 04:19:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:04 Parameters OK 04:19:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:04 Set A/D data flow result=40 04:19:04 Set A/D channel type result=40 04:19:04 Set A/D encoding result=40 04:19:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:04 Set channel filter=0.000000e+000 result=40 04:19:04 Config A/D Result=40 04:19:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:04 Get A/D filter: -9.255963e+061 result=40 04:19:04 Get A/D value=-858993460 result=40 04:19:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:04 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:04 Aux= 04:19:04 Message to Camera, serial 1059 queued 04:19:35 Received message from Master: op=PointingHead serial=1066 04:19:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:19:35 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:19:35 Point started: ret=0 04:19:35 point_skyscan result=0 04:19:36 Check angles 04:19:36 SkyScan query 04:19:37 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 04:19:37 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 04:19:37 Check angles 04:19:37 SkyScan query 04:19:37 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 04:19:37 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 04:19:37 Check angles 04:19:37 SkyScan query 04:19:38 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 04:19:38 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 04:19:38 Check angles 04:19:38 SkyScan query 04:19:39 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 04:19:39 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 04:19:39 Check angles 04:19:39 SkyScan query 04:19:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 04:19:40 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 04:19:40 Check angles 04:19:40 SkyScan query 04:19:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:19:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:19:40 Message to Master queued w/err=0: serial=1066 error=0 04:19:45 Received message from Master: op=Filter serial=1067 04:19:45 Color wheel filter change from 0 to 0 04:19:45 FLIGetFilterPos err=0 currentPosition=0 04:19:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:19:45 Filter is already there-color wheel unchanged 04:19:45 Received message from Master: op=Shutter serial=1068 04:19:45 Shutter LASER close 04:19:46 Received message from Camera: op=State serial=1070 04:19:46 GetSingleValue result=40 Value=cccccccc 04:19:46 SkyScan query 04:19:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:46 Parameters OK 04:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:46 Set A/D data flow result=40 04:19:46 Set A/D channel type result=40 04:19:46 Set A/D encoding result=40 04:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:46 Set channel filter=0.000000e+000 result=40 04:19:46 Config A/D Result=40 04:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:46 Get A/D filter: -9.255963e+061 result=40 04:19:46 Get A/D value=-858993460 result=40 04:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:19:46 Parameters OK 04:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:19:46 Set A/D data flow result=40 04:19:46 Set A/D channel type result=40 04:19:46 Set A/D encoding result=40 04:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:19:46 Set channel filter=0.000000e+000 result=40 04:19:46 Config A/D Result=40 04:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:19:46 Get A/D filter: -9.255963e+061 result=40 04:19:46 Get A/D value=-858993460 result=40 04:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:19:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:19:46 Aux= 04:19:46 Message to Camera, serial 1070 queued 04:20:17 Received message from Master: op=PointingHead serial=1077 04:20:17 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:20:17 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:20:17 Point started: ret=0 04:20:17 point_skyscan result=0 04:20:18 Check angles 04:20:18 SkyScan query 04:20:19 SkyScan query done: ret=0 az=152.79<-10186 ze=8.415<-11439 Statuses=0009 0009 04:20:19 Msec=0 True Az=152.79 Ze=8.415 Az status=0009 Ze status=0009 04:20:19 Check angles 04:20:19 SkyScan query 04:20:19 SkyScan query done: ret=0 az=135.255<-9017 ze=-12.555<-12837 Statuses=0009 0009 04:20:19 Msec=750 True Az=135.255 Ze=-12.555 Az status=0009 Ze status=0009 04:20:20 Check angles 04:20:20 SkyScan query 04:20:20 SkyScan query done: ret=0 az=117.69<-7846 ze=-33.48<-14232 Statuses=0009 0009 04:20:20 Msec=1500 True Az=117.69 Ze=-33.48 Az status=0009 Ze status=0009 04:20:20 Check angles 04:20:20 SkyScan query 04:20:21 SkyScan query done: ret=0 az=100.32<-6688 ze=-51.54<-15436 Statuses=0009 0009 04:20:21 Msec=2250 True Az=100.32 Ze=-51.54 Az status=0009 Ze status=0009 04:20:21 Check angles 04:20:21 SkyScan query 04:20:22 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 04:20:22 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 04:20:22 Check angles 04:20:22 SkyScan query 04:20:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:20:22 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:20:22 Message to Master queued w/err=0: serial=1077 error=0 04:20:27 Received message from Master: op=Filter serial=1078 04:20:27 Color wheel filter change from 0 to 0 04:20:27 FLIGetFilterPos err=0 currentPosition=0 04:20:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:20:27 Filter is already there-color wheel unchanged 04:20:28 Received message from Master: op=Shutter serial=1079 04:20:28 Shutter LASER close 04:20:28 Received message from Camera: op=State serial=1081 04:20:28 GetSingleValue result=40 Value=cccccccc 04:20:28 SkyScan query 04:20:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:20:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:28 Parameters OK 04:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:28 Set A/D data flow result=40 04:20:28 Set A/D channel type result=40 04:20:28 Set A/D encoding result=40 04:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:28 Set channel filter=0.000000e+000 result=40 04:20:28 Config A/D Result=40 04:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:28 Get A/D filter: -9.255963e+061 result=40 04:20:28 Get A/D value=-858993460 result=40 04:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:20:28 Parameters OK 04:20:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:20:28 Set A/D data flow result=40 04:20:28 Set A/D channel type result=40 04:20:28 Set A/D encoding result=40 04:20:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:20:28 Set channel filter=0.000000e+000 result=40 04:20:28 Config A/D Result=40 04:20:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:20:28 Get A/D filter: -9.255963e+061 result=40 04:20:28 Get A/D value=-858993460 result=40 04:20:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:20:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:20:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:20:28 Aux= 04:20:28 Message to Camera, serial 1081 queued 04:20:59 Received message from Master: op=PointingHead serial=1088 04:20:59 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:20:59 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:20:59 Point started: ret=0 04:20:59 point_skyscan result=0 04:21:00 Check angles 04:21:00 SkyScan query 04:21:01 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.54<-17436 Statuses=0009 0009 04:21:01 Msec=0 True Az=109.185 Ze=-81.54 Az status=0009 Ze status=0009 04:21:01 Check angles 04:21:01 SkyScan query 04:21:02 SkyScan query done: ret=0 az=113.025<-7535 ze=-102.495<-18833 Statuses=0008 0009 04:21:02 Msec=750 True Az=113.025 Ze=-102.495 Az status=0008 Ze status=0009 04:21:02 Check angles 04:21:02 SkyScan query 04:21:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 04:21:02 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 04:21:02 Check angles 04:21:02 SkyScan query 04:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 04:21:03 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 04:21:03 Check angles [UTC 2018-12-4 04:21:03] 04:21:03 SkyScan query 04:21:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-167.1<-23140 Statuses=0008 0009 04:21:04 Msec=3000 True Az=112.995 Ze=-167.1 Az status=0008 Ze status=0009 04:21:04 Check angles 04:21:04 SkyScan query 04:21:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:21:05 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:21:05 Message to Master queued w/err=0: serial=1088 error=0 04:21:10 Received message from Master: op=Filter serial=1089 04:21:10 Color wheel filter change from 0 to 0 04:21:10 FLIGetFilterPos err=0 currentPosition=0 04:21:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:10 Filter is already there-color wheel unchanged 04:21:10 Received message from Master: op=Shutter serial=1090 04:21:10 Shutter LASER open 04:21:10 Received message from Camera: op=State serial=1092 04:21:10 GetSingleValue result=40 Value=cccccccc 04:21:10 SkyScan query 04:21:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:21:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:10 Parameters OK 04:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:10 Set A/D data flow result=40 04:21:10 Set A/D channel type result=40 04:21:10 Set A/D encoding result=40 04:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:10 Set channel filter=0.000000e+000 result=40 04:21:10 Config A/D Result=40 04:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:10 Get A/D filter: -9.255963e+061 result=40 04:21:10 Get A/D value=-858993460 result=40 04:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:10 Parameters OK 04:21:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:10 Set A/D data flow result=40 04:21:10 Set A/D channel type result=40 04:21:10 Set A/D encoding result=40 04:21:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:10 Set channel filter=0.000000e+000 result=40 04:21:10 Config A/D Result=40 04:21:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:10 Get A/D filter: -9.255963e+061 result=40 04:21:10 Get A/D value=-858993460 result=40 04:21:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:10 Aux= 04:21:10 Message to Camera, serial 1092 queued 04:21:13 Received message from Master: op=Shutter serial=1096 04:21:13 Shutter LASER close 04:21:13 Received message from Master: op=PointingHead serial=1100 04:21:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:21:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:21:14 Point started: ret=0 04:21:14 point_skyscan result=0 04:21:14 Check angles 04:21:14 SkyScan query 04:21:15 SkyScan query done: ret=0 az=89.655<-5977 ze=156.93<-1538 Statuses=0009 0009 04:21:15 Msec=0 True Az=89.655 Ze=156.93 Az status=0009 Ze status=0009 04:21:15 Check angles 04:21:15 SkyScan query 04:21:16 SkyScan query done: ret=0 az=71.79<-4786 ze=135.525<-2965 Statuses=0009 0009 04:21:16 Msec=750 True Az=71.79 Ze=135.525 Az status=0009 Ze status=0009 04:21:16 Check angles 04:21:16 SkyScan query 04:21:17 SkyScan query done: ret=0 az=54.405<-3627 ze=114.57<-4362 Statuses=0009 0009 04:21:17 Msec=1500 True Az=54.405 Ze=114.57 Az status=0009 Ze status=0009 04:21:17 Check angles 04:21:17 SkyScan query 04:21:17 SkyScan query done: ret=0 az=40.995<-2733 ze=93.63<-5758 Statuses=0009 0009 04:21:17 Msec=2250 True Az=40.995 Ze=93.63 Az status=0009 Ze status=0009 04:21:17 Check angles 04:21:17 SkyScan query 04:21:18 SkyScan query done: ret=0 az=40.995<-2733 ze=72.21<-7186 Statuses=0008 0009 04:21:18 Msec=3000 True Az=40.995 Ze=72.21 Az status=0008 Ze status=0009 04:21:18 Check angles 04:21:18 SkyScan query 04:21:19 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 04:21:19 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 04:21:19 Check angles 04:21:19 SkyScan query 04:21:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:21:20 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:21:20 Message to Master queued w/err=0: serial=1100 error=0 04:21:25 Received message from Master: op=Filter serial=1101 04:21:25 Color wheel filter change from 0 to 0 04:21:25 FLIGetFilterPos err=0 currentPosition=0 04:21:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:21:25 Filter is already there-color wheel unchanged 04:21:25 Received message from Master: op=Shutter serial=1102 04:21:25 Shutter LASER close 04:21:25 Received message from Camera: op=State serial=1104 04:21:25 GetSingleValue result=40 Value=cccccccc 04:21:25 SkyScan query 04:21:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:21:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:25 Parameters OK 04:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:25 Set A/D data flow result=40 04:21:25 Set A/D channel type result=40 04:21:25 Set A/D encoding result=40 04:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:25 Set channel filter=0.000000e+000 result=40 04:21:25 Config A/D Result=40 04:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:25 Get A/D filter: -9.255963e+061 result=40 04:21:25 Get A/D value=-858993460 result=40 04:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:21:25 Parameters OK 04:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:21:25 Set A/D data flow result=40 04:21:25 Set A/D channel type result=40 04:21:25 Set A/D encoding result=40 04:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:21:25 Set channel filter=0.000000e+000 result=40 04:21:25 Config A/D Result=40 04:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:21:25 Get A/D filter: -9.255963e+061 result=40 04:21:25 Get A/D value=-858993460 result=40 04:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:21:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:21:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:21:25 Aux= 04:21:25 Message to Camera, serial 1104 queued 04:21:49 Received message from Master: op=Identify serial=1105 04:21:56 Received message from Master: op=PointingHead serial=1114 04:21:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:21:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:21:57 Point started: ret=0 04:21:57 point_skyscan result=0 04:21:57 Check angles 04:21:57 SkyScan query 04:21:58 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 04:21:58 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 04:21:58 Check angles 04:21:58 SkyScan query 04:21:59 SkyScan query done: ret=0 az=81.525<-5435 ze=66.51<-7566 Statuses=0009 0008 04:21:59 Msec=750 True Az=81.525 Ze=66.51 Az status=0009 Ze status=0008 04:21:59 Check angles 04:21:59 SkyScan query 04:21:59 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 04:21:59 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 04:22:00 Check angles 04:22:00 SkyScan query 04:22:00 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 04:22:00 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 04:22:00 Check angles 04:22:00 SkyScan query 04:22:01 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 04:22:01 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 04:22:01 Check angles 04:22:01 SkyScan query 04:22:02 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 04:22:02 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 04:22:02 Check angles 04:22:02 SkyScan query 04:22:03 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:22:03 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:22:03 Message to Master queued w/err=0: serial=1114 error=0 04:22:08 Received message from Master: op=Filter serial=1115 04:22:08 Color wheel filter change from 0 to 0 04:22:08 FLIGetFilterPos err=0 currentPosition=0 04:22:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:08 Filter is already there-color wheel unchanged 04:22:08 Received message from Master: op=Shutter serial=1116 04:22:08 Shutter LASER close 04:22:08 Received message from Camera: op=State serial=1118 04:22:08 GetSingleValue result=40 Value=cccccccc 04:22:08 SkyScan query 04:22:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:22:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:08 Parameters OK 04:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:08 Set A/D data flow result=40 04:22:08 Set A/D channel type result=40 04:22:08 Set A/D encoding result=40 04:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:08 Set channel filter=0.000000e+000 result=40 04:22:08 Config A/D Result=40 04:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:08 Get A/D filter: -9.255963e+061 result=40 04:22:08 Get A/D value=-858993460 result=40 04:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:08 Parameters OK 04:22:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:08 Set A/D data flow result=40 04:22:08 Set A/D channel type result=40 04:22:08 Set A/D encoding result=40 04:22:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:08 Set channel filter=0.000000e+000 result=40 04:22:08 Config A/D Result=40 04:22:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:08 Get A/D filter: -9.255963e+061 result=40 04:22:08 Get A/D value=-858993460 result=40 04:22:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:08 Aux= 04:22:08 Message to Camera, serial 1118 queued 04:22:39 Received message from Master: op=PointingHead serial=1125 04:22:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:22:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:22:40 Point started: ret=0 04:22:40 point_skyscan result=0 04:22:40 Check angles 04:22:40 SkyScan query 04:22:41 SkyScan query done: ret=0 az=134.715<-8981 ze=36.33<-9578 Statuses=0009 0009 04:22:41 Msec=0 True Az=134.715 Ze=36.33 Az status=0009 Ze status=0009 04:22:41 Check angles 04:22:41 SkyScan query 04:22:42 SkyScan query done: ret=0 az=117.06<-7804 ze=15.39<-10974 Statuses=0009 0009 04:22:42 Msec=750 True Az=117.06 Ze=15.39 Az status=0009 Ze status=0009 04:22:42 Check angles 04:22:42 SkyScan query 04:22:42 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.565<-12371 Statuses=0009 0009 04:22:42 Msec=1500 True Az=99.78 Ze=-5.565 Az status=0009 Ze status=0009 04:22:43 Check angles 04:22:43 SkyScan query 04:22:43 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.565<-13771 Statuses=0009 0009 04:22:43 Msec=2250 True Az=82.2 Ze=-26.565 Az status=0009 Ze status=0009 04:22:43 Check angles 04:22:43 SkyScan query 04:22:44 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.565<-14571 Statuses=0009 0008 04:22:44 Msec=3000 True Az=64.86 Ze=-38.565 Az status=0009 Ze status=0008 04:22:44 Check angles 04:22:44 SkyScan query 04:22:45 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 04:22:45 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 04:22:45 Check angles 04:22:45 SkyScan query 04:22:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:22:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:22:45 Message to Master queued w/err=0: serial=1125 error=0 04:22:50 Received message from Master: op=Filter serial=1126 04:22:50 Color wheel filter change from 0 to 0 04:22:50 FLIGetFilterPos err=0 currentPosition=0 04:22:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:22:50 Filter is already there-color wheel unchanged 04:22:51 Received message from Master: op=Shutter serial=1127 04:22:51 Shutter LASER close 04:22:51 Received message from Camera: op=State serial=1129 04:22:51 GetSingleValue result=40 Value=cccccccc 04:22:51 SkyScan query 04:22:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:22:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:51 Parameters OK 04:22:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:51 Set A/D data flow result=40 04:22:51 Set A/D channel type result=40 04:22:51 Set A/D encoding result=40 04:22:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:51 Set channel filter=0.000000e+000 result=40 04:22:51 Config A/D Result=40 04:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:51 Get A/D filter: -9.255963e+061 result=40 04:22:51 Get A/D value=-858993460 result=40 04:22:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:22:51 Parameters OK 04:22:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:22:51 Set A/D data flow result=40 04:22:51 Set A/D channel type result=40 04:22:51 Set A/D encoding result=40 04:22:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:22:51 Set channel filter=0.000000e+000 result=40 04:22:51 Config A/D Result=40 04:22:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:22:51 Get A/D filter: -9.255963e+061 result=40 04:22:51 Get A/D value=-858993460 result=40 04:22:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:22:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:22:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:22:51 Aux= 04:22:51 Message to Camera, serial 1129 queued 04:23:22 Received message from Master: op=PointingHead serial=1136 04:23:22 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:23:22 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:23:22 Point started: ret=0 04:23:22 point_skyscan result=0 04:23:23 Check angles 04:23:23 SkyScan query 04:23:24 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.745<-16583 Statuses=0009 0009 04:23:24 Msec=0 True Az=64.23 Ze=-68.745 Az status=0009 Ze status=0009 04:23:24 Check angles 04:23:24 SkyScan query 04:23:24 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.7<-17980 Statuses=0009 0009 04:23:24 Msec=750 True Az=82.02 Ze=-89.7 Az status=0009 Ze status=0009 04:23:25 Check angles 04:23:25 SkyScan query 04:23:25 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.655<-19377 Statuses=0009 0009 04:23:25 Msec=1500 True Az=99.405 Ze=-110.655 Az status=0009 Ze status=0009 04:23:25 Check angles 04:23:25 SkyScan query 04:23:26 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.595<-20773 Statuses=0009 0009 04:23:26 Msec=2250 True Az=116.775 Ze=-131.595 Az status=0009 Ze status=0009 04:23:26 Check angles 04:23:26 SkyScan query 04:23:27 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 04:23:27 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 04:23:27 Check angles 04:23:27 SkyScan query 04:23:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:23:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:23:27 Message to Master queued w/err=0: serial=1136 error=0 04:23:32 Received message from Master: op=Filter serial=1137 04:23:32 Color wheel filter change from 0 to 0 04:23:32 FLIGetFilterPos err=0 currentPosition=0 04:23:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:23:32 Filter is already there-color wheel unchanged 04:23:33 Received message from Master: op=Shutter serial=1138 04:23:33 Shutter LASER close 04:23:33 Received message from Camera: op=State serial=1140 04:23:33 GetSingleValue result=40 Value=cccccccc 04:23:33 SkyScan query 04:23:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:23:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:33 Parameters OK 04:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:33 Set A/D data flow result=40 04:23:33 Set A/D channel type result=40 04:23:33 Set A/D encoding result=40 04:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:33 Set channel filter=0.000000e+000 result=40 04:23:33 Config A/D Result=40 04:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:33 Get A/D filter: -9.255963e+061 result=40 04:23:33 Get A/D value=-858993460 result=40 04:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:23:33 Parameters OK 04:23:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:23:33 Set A/D data flow result=40 04:23:33 Set A/D channel type result=40 04:23:33 Set A/D encoding result=40 04:23:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:23:33 Set channel filter=0.000000e+000 result=40 04:23:33 Config A/D Result=40 04:23:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:23:33 Get A/D filter: -9.255963e+061 result=40 04:23:33 Get A/D value=-858993460 result=40 04:23:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:23:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:23:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:23:33 Aux= 04:23:33 Message to Camera, serial 1140 queued 04:24:04 Received message from Master: op=PointingHead serial=1147 04:24:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:24:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:24:05 Point started: ret=0 04:24:05 point_skyscan result=0 04:24:05 Check angles 04:24:05 SkyScan query 04:24:06 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.15<-23410 Statuses=0009 0009 04:24:06 Msec=0 True Az=113.025 Ze=-171.15 Az status=0009 Ze status=0009 04:24:06 Check angles 04:24:06 SkyScan query 04:24:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:24:07 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:24:07 Message to Master queued w/err=0: serial=1147 error=0 04:24:12 Received message from Master: op=Filter serial=1148 04:24:12 Color wheel filter change from 0 to 0 04:24:12 FLIGetFilterPos err=0 currentPosition=0 04:24:12 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:12 Filter is already there-color wheel unchanged 04:24:12 Received message from Master: op=Shutter serial=1149 04:24:12 Shutter LASER open 04:24:12 Received message from Camera: op=State serial=1151 04:24:12 GetSingleValue result=40 Value=cccccccc 04:24:12 SkyScan query 04:24:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:13 Parameters OK 04:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:13 Set A/D data flow result=40 04:24:13 Set A/D channel type result=40 04:24:13 Set A/D encoding result=40 04:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:13 Set channel filter=0.000000e+000 result=40 04:24:13 Config A/D Result=40 04:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:13 Get A/D filter: -9.255963e+061 result=40 04:24:13 Get A/D value=-858993460 result=40 04:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:13 Parameters OK 04:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:13 Set A/D data flow result=40 04:24:13 Set A/D channel type result=40 04:24:13 Set A/D encoding result=40 04:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:13 Set channel filter=0.000000e+000 result=40 04:24:13 Config A/D Result=40 04:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:13 Get A/D filter: -9.255963e+061 result=40 04:24:13 Get A/D value=-858993460 result=40 04:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:13 Aux= 04:24:13 Message to Camera, serial 1151 queued 04:24:15 Received message from Master: op=Shutter serial=1155 04:24:15 Shutter LASER close 04:24:16 Received message from Master: op=PointingHead serial=1159 04:24:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:24:16 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:24:16 Point started: ret=0 04:24:16 point_skyscan result=0 04:24:17 Check angles 04:24:17 SkyScan query 04:24:17 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.74<-21516 Statuses=0009 0009 04:24:17 Msec=0 True Az=136.38 Ze=-142.74 Az status=0009 Ze status=0009 04:24:17 Check angles 04:24:17 SkyScan query 04:24:18 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.8<-20120 Statuses=0009 0009 04:24:18 Msec=750 True Az=153.93 Ze=-121.8 Az status=0009 Ze status=0009 04:24:18 Check angles 04:24:18 SkyScan query 04:24:19 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.86<-18724 Statuses=0009 0009 04:24:19 Msec=1500 True Az=171.3 Ze=-100.86 Az status=0009 Ze status=0009 04:24:19 Check angles 04:24:19 SkyScan query 04:24:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 04:24:20 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 04:24:20 Check angles 04:24:20 SkyScan query 04:24:20 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.935<-15929 Statuses=0008 0009 04:24:20 Msec=3000 True Az=176.01 Ze=-58.935 Az status=0008 Ze status=0009 04:24:20 Check angles 04:24:20 SkyScan query 04:24:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:24:21 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:24:21 Message to Master queued w/err=0: serial=1159 error=0 04:24:26 Received message from Master: op=Filter serial=1160 04:24:26 Color wheel filter change from 0 to 0 04:24:26 FLIGetFilterPos err=0 currentPosition=0 04:24:26 FLIGetStepsRemaining err=0 RemainingSteps=0 04:24:26 Filter is already there-color wheel unchanged 04:24:26 Received message from Master: op=Shutter serial=1161 04:24:26 Shutter LASER close 04:24:26 Received message from Camera: op=State serial=1163 04:24:26 GetSingleValue result=40 Value=cccccccc 04:24:26 SkyScan query 04:24:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:24:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:27 Parameters OK 04:24:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:27 Set A/D data flow result=40 04:24:27 Set A/D channel type result=40 04:24:27 Set A/D encoding result=40 04:24:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:27 Set channel filter=0.000000e+000 result=40 04:24:27 Config A/D Result=40 04:24:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:27 Get A/D filter: -9.255963e+061 result=40 04:24:27 Get A/D value=-858993460 result=40 04:24:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:24:27 Parameters OK 04:24:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:24:27 Set A/D data flow result=40 04:24:27 Set A/D channel type result=40 04:24:27 Set A/D encoding result=40 04:24:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:24:27 Set channel filter=0.000000e+000 result=40 04:24:27 Config A/D Result=40 04:24:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:24:27 Get A/D filter: -9.255963e+061 result=40 04:24:27 Get A/D value=-858993460 result=40 04:24:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:24:27 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:24:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:24:27 Aux= 04:24:27 Message to Camera, serial 1163 queued 04:24:58 Received message from Master: op=PointingHead serial=1170 04:24:58 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:24:58 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:24:58 Point started: ret=0 04:24:58 point_skyscan result=0 04:24:59 Check angles 04:24:59 SkyScan query 04:24:59 SkyScan query done: ret=0 az=153.12<-10208 ze=-22.035<-13469 Statuses=0009 0009 04:24:59 Msec=0 True Az=153.12 Ze=-22.035 Az status=0009 Ze status=0009 04:25:00 Check angles 04:25:00 SkyScan query 04:25:00 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.63<-12042 Statuses=0009 0009 04:25:00 Msec=750 True Az=135.36 Ze=-0.63 Az status=0009 Ze status=0009 04:25:00 Check angles 04:25:00 SkyScan query 04:25:01 SkyScan query done: ret=0 az=117.795<-7853 ze=20.34<-10644 Statuses=0009 0009 04:25:01 Msec=1500 True Az=117.795 Ze=20.34 Az status=0009 Ze status=0009 04:25:01 Check angles 04:25:01 SkyScan query 04:25:02 SkyScan query done: ret=0 az=100.41<-6694 ze=41.28<-9248 Statuses=0009 0009 04:25:02 Msec=2250 True Az=100.41 Ze=41.28 Az status=0009 Ze status=0009 04:25:02 Check angles 04:25:02 SkyScan query 04:25:02 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:25:02 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:25:03 Check angles 04:25:03 SkyScan query 04:25:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:25:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:25:03 Message to Master queued w/err=0: serial=1170 error=0 04:25:08 Received message from Master: op=Filter serial=1171 04:25:08 Color wheel filter change from 0 to 0 04:25:08 FLIGetFilterPos err=0 currentPosition=0 04:25:08 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:08 Filter is already there-color wheel unchanged 04:25:08 Received message from Master: op=Shutter serial=1172 04:25:08 Shutter LASER close 04:25:08 Received message from Camera: op=State serial=1174 04:25:08 GetSingleValue result=40 Value=cccccccc 04:25:08 SkyScan query 04:25:09 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:25:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:09 Parameters OK 04:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:09 Set A/D data flow result=40 04:25:09 Set A/D channel type result=40 04:25:09 Set A/D encoding result=40 04:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:09 Set channel filter=0.000000e+000 result=40 04:25:09 Config A/D Result=40 04:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:09 Get A/D filter: -9.255963e+061 result=40 04:25:09 Get A/D value=-858993460 result=40 04:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:09 Parameters OK 04:25:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:09 Set A/D data flow result=40 04:25:09 Set A/D channel type result=40 04:25:09 Set A/D encoding result=40 04:25:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:09 Set channel filter=0.000000e+000 result=40 04:25:09 Config A/D Result=40 04:25:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:09 Get A/D filter: -9.255963e+061 result=40 04:25:09 Get A/D value=-858993460 result=40 04:25:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:09 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:09 Aux= 04:25:09 Message to Camera, serial 1174 queued 04:25:40 Received message from Master: op=PointingHead serial=1181 04:25:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:25:40 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:25:40 Point started: ret=0 04:25:40 point_skyscan result=0 04:25:41 Check angles 04:25:41 SkyScan query 04:25:42 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 04:25:42 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 04:25:42 Check angles 04:25:42 SkyScan query 04:25:42 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 04:25:42 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 04:25:42 Check angles 04:25:42 SkyScan query 04:25:43 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 04:25:43 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 04:25:43 Check angles 04:25:43 SkyScan query 04:25:44 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 04:25:44 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 04:25:44 Check angles 04:25:44 SkyScan query 04:25:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 04:25:45 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 04:25:45 Check angles 04:25:45 SkyScan query 04:25:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:25:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:25:45 Message to Master queued w/err=0: serial=1181 error=0 04:25:50 Received message from Master: op=Filter serial=1182 04:25:50 Color wheel filter change from 0 to 0 04:25:50 FLIGetFilterPos err=0 currentPosition=0 04:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:25:50 Filter is already there-color wheel unchanged 04:25:50 Received message from Master: op=Shutter serial=1183 04:25:50 Shutter LASER close 04:25:51 Received message from Camera: op=State serial=1185 04:25:51 GetSingleValue result=40 Value=cccccccc 04:25:51 SkyScan query 04:25:51 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:51 Parameters OK 04:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:51 Set A/D data flow result=40 04:25:51 Set A/D channel type result=40 04:25:51 Set A/D encoding result=40 04:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:51 Set channel filter=0.000000e+000 result=40 04:25:51 Config A/D Result=40 04:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:51 Get A/D filter: -9.255963e+061 result=40 04:25:51 Get A/D value=-858993460 result=40 04:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:25:51 Parameters OK 04:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:25:51 Set A/D data flow result=40 04:25:51 Set A/D channel type result=40 04:25:51 Set A/D encoding result=40 04:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:25:51 Set channel filter=0.000000e+000 result=40 04:25:51 Config A/D Result=40 04:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:25:51 Get A/D filter: -9.255963e+061 result=40 04:25:51 Get A/D value=-858993460 result=40 04:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:25:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:25:51 Aux= 04:25:51 Message to Camera, serial 1185 queued 04:26:22 Received message from Master: op=PointingHead serial=1192 04:26:22 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:26:22 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:26:22 Point started: ret=0 04:26:22 point_skyscan result=0 04:26:23 Check angles 04:26:23 SkyScan query 04:26:24 SkyScan query done: ret=0 az=152.745<-10183 ze=8.34<-11444 Statuses=0009 0009 04:26:24 Msec=0 True Az=152.745 Ze=8.34 Az status=0009 Ze status=0009 04:26:24 Check angles 04:26:24 SkyScan query 04:26:24 SkyScan query done: ret=0 az=135.06<-9004 ze=-13.08<-12872 Statuses=0009 0009 04:26:24 Msec=750 True Az=135.06 Ze=-13.08 Az status=0009 Ze status=0009 04:26:25 Check angles 04:26:25 SkyScan query 04:26:25 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.99<-14266 Statuses=0009 0009 04:26:25 Msec=1500 True Az=117.375 Ze=-33.99 Az status=0009 Ze status=0009 04:26:25 Check angles 04:26:25 SkyScan query 04:26:26 SkyScan query done: ret=0 az=99.57<-6638 ze=-51.555<-15437 Statuses=0009 0009 04:26:26 Msec=2250 True Az=99.57 Ze=-51.555 Az status=0009 Ze status=0009 04:26:26 Check angles 04:26:26 SkyScan query 04:26:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:26:27 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:26:27 Check angles 04:26:27 SkyScan query 04:26:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:26:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:26:27 Message to Master queued w/err=0: serial=1192 error=0 04:26:32 Received message from Master: op=Filter serial=1193 04:26:32 Color wheel filter change from 0 to 0 04:26:32 FLIGetFilterPos err=0 currentPosition=0 04:26:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:26:32 Filter is already there-color wheel unchanged 04:26:33 Received message from Master: op=Shutter serial=1194 04:26:33 Shutter LASER close 04:26:33 Received message from Camera: op=State serial=1196 04:26:33 GetSingleValue result=40 Value=cccccccc 04:26:33 SkyScan query 04:26:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:26:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:33 Parameters OK 04:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:33 Set A/D data flow result=40 04:26:33 Set A/D channel type result=40 04:26:33 Set A/D encoding result=40 04:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:33 Set channel filter=0.000000e+000 result=40 04:26:33 Config A/D Result=40 04:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:33 Get A/D filter: -9.255963e+061 result=40 04:26:33 Get A/D value=-858993460 result=40 04:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:26:33 Parameters OK 04:26:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:26:33 Set A/D data flow result=40 04:26:33 Set A/D channel type result=40 04:26:33 Set A/D encoding result=40 04:26:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:26:33 Set channel filter=0.000000e+000 result=40 04:26:33 Config A/D Result=40 04:26:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:26:33 Get A/D filter: -9.255963e+061 result=40 04:26:33 Get A/D value=-858993460 result=40 04:26:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:26:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:26:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:26:33 Aux= 04:26:33 Message to Camera, serial 1196 queued 04:27:04 Received message from Master: op=PointingHead serial=1203 04:27:04 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:27:04 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:27:04 Point started: ret=0 04:27:04 point_skyscan result=0 04:27:05 Check angles 04:27:05 SkyScan query 04:27:06 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.825<-17455 Statuses=0009 0009 04:27:06 Msec=0 True Az=109.38 Ze=-81.825 Az status=0009 Ze status=0009 04:27:06 Check angles 04:27:06 SkyScan query 04:27:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.75<-18850 Statuses=0008 0009 04:27:07 Msec=750 True Az=113.01 Ze=-102.75 Az status=0008 Ze status=0009 04:27:07 Check angles 04:27:07 SkyScan query 04:27:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 04:27:07 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 04:27:07 Check angles 04:27:07 SkyScan query 04:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.125<-21675 Statuses=0008 0009 04:27:08 Msec=2250 True Az=112.995 Ze=-145.125 Az status=0008 Ze status=0009 04:27:08 Check angles 04:27:08 SkyScan query 04:27:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 04:27:09 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 04:27:09 Check angles 04:27:09 SkyScan query 04:27:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:27:10 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:27:10 Message to Master queued w/err=0: serial=1203 error=0 04:27:15 Received message from Master: op=Filter serial=1204 04:27:15 Color wheel filter change from 0 to 0 04:27:15 FLIGetFilterPos err=0 currentPosition=0 04:27:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:15 Filter is already there-color wheel unchanged 04:27:15 Received message from Master: op=Shutter serial=1205 04:27:15 Shutter LASER open 04:27:15 Received message from Camera: op=State serial=1207 04:27:15 GetSingleValue result=40 Value=cccccccc 04:27:15 SkyScan query 04:27:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:27:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:15 Parameters OK 04:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:15 Set A/D data flow result=40 04:27:15 Set A/D channel type result=40 04:27:15 Set A/D encoding result=40 04:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:15 Set channel filter=0.000000e+000 result=40 04:27:15 Config A/D Result=40 04:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:15 Get A/D filter: -9.255963e+061 result=40 04:27:15 Get A/D value=-858993460 result=40 04:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:15 Parameters OK 04:27:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:15 Set A/D data flow result=40 04:27:15 Set A/D channel type result=40 04:27:15 Set A/D encoding result=40 04:27:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:15 Set channel filter=0.000000e+000 result=40 04:27:15 Config A/D Result=40 04:27:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:15 Get A/D filter: -9.255963e+061 result=40 04:27:15 Get A/D value=-858993460 result=40 04:27:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:15 Aux= 04:27:15 Message to Camera, serial 1207 queued 04:27:18 Received message from Master: op=Shutter serial=1211 04:27:18 Shutter LASER close 04:27:18 Received message from Master: op=PointingHead serial=1215 04:27:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:27:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:27:19 Point started: ret=0 04:27:19 point_skyscan result=0 04:27:19 Check angles 04:27:19 SkyScan query 04:27:20 SkyScan query done: ret=0 az=89.925<-5995 ze=157.305<-1513 Statuses=0009 0009 04:27:20 Msec=0 True Az=89.925 Ze=157.305 Az status=0009 Ze status=0009 04:27:20 Check angles 04:27:20 SkyScan query 04:27:21 SkyScan query done: ret=0 az=72.15<-4810 ze=135.915<-2939 Statuses=0009 0009 04:27:21 Msec=750 True Az=72.15 Ze=135.915 Az status=0009 Ze status=0009 04:27:21 Check angles 04:27:21 SkyScan query 04:27:22 SkyScan query done: ret=0 az=54.705<-3647 ze=114.96<-4336 Statuses=0009 0009 04:27:22 Msec=1500 True Az=54.705 Ze=114.96 Az status=0009 Ze status=0009 04:27:22 Check angles 04:27:22 SkyScan query 04:27:22 SkyScan query done: ret=0 az=41.04<-2736 ze=94.005<-5733 Statuses=0009 0009 04:27:22 Msec=2250 True Az=41.04 Ze=94.005 Az status=0009 Ze status=0009 04:27:22 Check angles 04:27:22 SkyScan query 04:27:23 SkyScan query done: ret=0 az=40.995<-2733 ze=72.615<-7159 Statuses=0008 0009 04:27:23 Msec=3000 True Az=40.995 Ze=72.615 Az status=0008 Ze status=0009 04:27:23 Check angles 04:27:23 SkyScan query 04:27:24 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 04:27:24 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 04:27:24 Check angles 04:27:24 SkyScan query 04:27:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:27:25 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:27:25 Message to Master queued w/err=0: serial=1215 error=0 04:27:30 Received message from Master: op=Filter serial=1216 04:27:30 Color wheel filter change from 0 to 0 04:27:30 FLIGetFilterPos err=0 currentPosition=0 04:27:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:27:30 Filter is already there-color wheel unchanged 04:27:30 Received message from Master: op=Shutter serial=1217 04:27:30 Shutter LASER close 04:27:30 Received message from Camera: op=State serial=1219 04:27:30 GetSingleValue result=40 Value=cccccccc 04:27:30 SkyScan query 04:27:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:30 Parameters OK 04:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:30 Set A/D data flow result=40 04:27:30 Set A/D channel type result=40 04:27:30 Set A/D encoding result=40 04:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:30 Set channel filter=0.000000e+000 result=40 04:27:30 Config A/D Result=40 04:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:30 Get A/D filter: -9.255963e+061 result=40 04:27:30 Get A/D value=-858993460 result=40 04:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:27:30 Parameters OK 04:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:27:30 Set A/D data flow result=40 04:27:30 Set A/D channel type result=40 04:27:30 Set A/D encoding result=40 04:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:27:30 Set channel filter=0.000000e+000 result=40 04:27:30 Config A/D Result=40 04:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:27:30 Get A/D filter: -9.255963e+061 result=40 04:27:30 Get A/D value=-858993460 result=40 04:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:27:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:27:30 Aux= 04:27:30 Message to Camera, serial 1219 queued 04:28:01 Received message from Master: op=PointingHead serial=1226 04:28:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:28:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:28:02 Point started: ret=0 04:28:02 point_skyscan result=0 04:28:02 Check angles 04:28:02 SkyScan query 04:28:03 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 04:28:03 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 04:28:03 Check angles 04:28:03 SkyScan query 04:28:04 SkyScan query done: ret=0 az=82.215<-5481 ze=66.495<-7567 Statuses=0009 0008 04:28:04 Msec=750 True Az=82.215 Ze=66.495 Az status=0009 Ze status=0008 04:28:04 Check angles 04:28:04 SkyScan query 04:28:04 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 04:28:04 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 04:28:05 Check angles 04:28:05 SkyScan query 04:28:05 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 04:28:05 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 04:28:05 Check angles 04:28:05 SkyScan query 04:28:06 SkyScan query done: ret=0 az=134.865<-8991 ze=66.495<-7567 Statuses=0009 0008 04:28:06 Msec=3000 True Az=134.865 Ze=66.495 Az status=0009 Ze status=0008 04:28:06 Check angles 04:28:06 SkyScan query 04:28:07 SkyScan query done: ret=0 az=152.565<-10171 ze=66.495<-7567 Statuses=0009 0008 04:28:07 Msec=3750 True Az=152.565 Ze=66.495 Az status=0009 Ze status=0008 04:28:07 Check angles 04:28:07 SkyScan query 04:28:08 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:28:08 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:28:08 Message to Master queued w/err=0: serial=1226 error=0 04:28:13 Received message from Master: op=Filter serial=1227 04:28:13 Color wheel filter change from 0 to 0 04:28:13 FLIGetFilterPos err=0 currentPosition=0 04:28:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:13 Filter is already there-color wheel unchanged 04:28:13 Received message from Master: op=Shutter serial=1228 04:28:13 Shutter LASER close 04:28:13 Received message from Camera: op=State serial=1230 04:28:13 GetSingleValue result=40 Value=cccccccc 04:28:13 SkyScan query 04:28:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:28:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:13 Parameters OK 04:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:13 Set A/D data flow result=40 04:28:13 Set A/D channel type result=40 04:28:13 Set A/D encoding result=40 04:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:13 Set channel filter=0.000000e+000 result=40 04:28:13 Config A/D Result=40 04:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:13 Get A/D filter: -9.255963e+061 result=40 04:28:13 Get A/D value=-858993460 result=40 04:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:13 Parameters OK 04:28:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:13 Set A/D data flow result=40 04:28:13 Set A/D channel type result=40 04:28:13 Set A/D encoding result=40 04:28:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:13 Set channel filter=0.000000e+000 result=40 04:28:13 Config A/D Result=40 04:28:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:13 Get A/D filter: -9.255963e+061 result=40 04:28:13 Get A/D value=-858993460 result=40 04:28:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:13 Aux= 04:28:13 Message to Camera, serial 1230 queued 04:28:44 Received message from Master: op=PointingHead serial=1237 04:28:44 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:28:44 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:28:45 Point started: ret=0 04:28:45 point_skyscan result=0 04:28:45 Check angles 04:28:45 SkyScan query 04:28:46 SkyScan query done: ret=0 az=135.24<-9016 ze=36.945<-9537 Statuses=0009 0009 04:28:46 Msec=0 True Az=135.24 Ze=36.945 Az status=0009 Ze status=0009 04:28:46 Check angles 04:28:46 SkyScan query 04:28:47 SkyScan query done: ret=0 az=117.765<-7851 ze=15.975<-10935 Statuses=0009 0009 04:28:47 Msec=750 True Az=117.765 Ze=15.975 Az status=0009 Ze status=0009 04:28:47 Check angles 04:28:47 SkyScan query 04:28:47 SkyScan query done: ret=0 az=100.365<-6691 ze=-4.995<-12333 Statuses=0009 0009 04:28:47 Msec=1500 True Az=100.365 Ze=-4.995 Az status=0009 Ze status=0009 04:28:48 Check angles 04:28:48 SkyScan query 04:28:48 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.37<-13758 Statuses=0009 0009 04:28:48 Msec=2250 True Az=82.5 Ze=-26.37 Az status=0009 Ze status=0009 04:28:48 Check angles 04:28:48 SkyScan query 04:28:49 SkyScan query done: ret=0 az=64.995<-4333 ze=-38.565<-14571 Statuses=0009 0008 04:28:49 Msec=3000 True Az=64.995 Ze=-38.565 Az status=0009 Ze status=0008 04:28:49 Check angles 04:28:49 SkyScan query 04:28:50 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.535<-14569 Statuses=0009 0008 04:28:50 Msec=3750 True Az=47.595 Ze=-38.535 Az status=0009 Ze status=0008 04:28:50 Check angles 04:28:50 SkyScan query 04:28:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:28:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:28:50 Message to Master queued w/err=0: serial=1237 error=0 04:28:55 Received message from Master: op=Filter serial=1238 04:28:55 Color wheel filter change from 0 to 0 04:28:55 FLIGetFilterPos err=0 currentPosition=0 04:28:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:28:55 Filter is already there-color wheel unchanged 04:28:56 Received message from Master: op=Shutter serial=1239 04:28:56 Shutter LASER close 04:28:56 Received message from Camera: op=State serial=1241 04:28:56 GetSingleValue result=40 Value=cccccccc 04:28:56 SkyScan query 04:28:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:28:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:56 Parameters OK 04:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:56 Set A/D data flow result=40 04:28:56 Set A/D channel type result=40 04:28:56 Set A/D encoding result=40 04:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:56 Set channel filter=0.000000e+000 result=40 04:28:56 Config A/D Result=40 04:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:56 Get A/D filter: -9.255963e+061 result=40 04:28:56 Get A/D value=-858993460 result=40 04:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:28:56 Parameters OK 04:28:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:28:56 Set A/D data flow result=40 04:28:56 Set A/D channel type result=40 04:28:56 Set A/D encoding result=40 04:28:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:28:56 Set channel filter=0.000000e+000 result=40 04:28:56 Config A/D Result=40 04:28:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:28:56 Get A/D filter: -9.255963e+061 result=40 04:28:56 Get A/D value=-858993460 result=40 04:28:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:28:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:28:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:28:56 Aux= 04:28:56 Message to Camera, serial 1241 queued 04:29:27 Received message from Master: op=PointingHead serial=1248 04:29:27 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:29:27 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:29:27 Point started: ret=0 04:29:27 point_skyscan result=0 04:29:28 Check angles 04:29:28 SkyScan query 04:29:29 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.325<-16555 Statuses=0009 0009 04:29:29 Msec=0 True Az=63.99 Ze=-68.325 Az status=0009 Ze status=0009 04:29:29 Check angles 04:29:29 SkyScan query 04:29:30 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.28<-17952 Statuses=0009 0009 [UTC 2018-12-4 04:29:30] 04:29:30 Msec=750 True Az=81.585 Ze=-89.28 Az status=0009 Ze status=0009 04:29:30 Check angles 04:29:30 SkyScan query 04:29:30 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.655<-19377 Statuses=0009 0009 04:29:30 Msec=1500 True Az=99.39 Ze=-110.655 Az status=0009 Ze status=0009 04:29:30 Check angles 04:29:30 SkyScan query 04:29:31 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.595<-20773 Statuses=0009 0009 04:29:31 Msec=2250 True Az=116.76 Ze=-131.595 Az status=0009 Ze status=0009 04:29:31 Check angles 04:29:31 SkyScan query 04:29:32 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 04:29:32 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 04:29:32 Check angles 04:29:32 SkyScan query 04:29:33 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:29:33 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:29:33 Message to Master queued w/err=0: serial=1248 error=0 04:29:38 Received message from Master: op=Filter serial=1249 04:29:38 Color wheel filter change from 0 to 0 04:29:38 FLIGetFilterPos err=0 currentPosition=0 04:29:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:29:38 Filter is already there-color wheel unchanged 04:29:38 Received message from Master: op=Shutter serial=1250 04:29:38 Shutter LASER close 04:29:38 Received message from Camera: op=State serial=1252 04:29:38 GetSingleValue result=40 Value=cccccccc 04:29:38 SkyScan query 04:29:38 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:29:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:38 Parameters OK 04:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:38 Set A/D data flow result=40 04:29:38 Set A/D channel type result=40 04:29:38 Set A/D encoding result=40 04:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:38 Set channel filter=0.000000e+000 result=40 04:29:38 Config A/D Result=40 04:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:38 Get A/D filter: -9.255963e+061 result=40 04:29:38 Get A/D value=-858993460 result=40 04:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:29:38 Parameters OK 04:29:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:29:38 Set A/D data flow result=40 04:29:38 Set A/D channel type result=40 04:29:38 Set A/D encoding result=40 04:29:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:29:38 Set channel filter=0.000000e+000 result=40 04:29:38 Config A/D Result=40 04:29:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:29:38 Get A/D filter: -9.255963e+061 result=40 04:29:38 Get A/D value=-858993460 result=40 04:29:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:29:38 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:29:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:29:38 Aux= 04:29:38 Message to Camera, serial 1252 queued 04:30:09 Received message from Master: op=PointingHead serial=1259 04:30:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:30:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:30:10 Point started: ret=0 04:30:10 point_skyscan result=0 04:30:10 Check angles 04:30:10 SkyScan query 04:30:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0009 0009 04:30:11 Msec=0 True Az=113.01 Ze=-171.495 Az status=0009 Ze status=0009 04:30:11 Check angles 04:30:11 SkyScan query 04:30:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:30:12 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:30:12 Message to Master queued w/err=0: serial=1259 error=0 04:30:17 Received message from Master: op=Filter serial=1260 04:30:17 Color wheel filter change from 0 to 0 04:30:17 FLIGetFilterPos err=0 currentPosition=0 04:30:17 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:17 Filter is already there-color wheel unchanged 04:30:17 Received message from Master: op=Shutter serial=1261 04:30:17 Shutter LASER open 04:30:17 Received message from Camera: op=State serial=1263 04:30:17 GetSingleValue result=40 Value=cccccccc 04:30:17 SkyScan query 04:30:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:30:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:18 Parameters OK 04:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:18 Set A/D data flow result=40 04:30:18 Set A/D channel type result=40 04:30:18 Set A/D encoding result=40 04:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:18 Set channel filter=0.000000e+000 result=40 04:30:18 Config A/D Result=40 04:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:18 Get A/D filter: -9.255963e+061 result=40 04:30:18 Get A/D value=-858993460 result=40 04:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:18 Parameters OK 04:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:18 Set A/D data flow result=40 04:30:18 Set A/D channel type result=40 04:30:18 Set A/D encoding result=40 04:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:18 Set channel filter=0.000000e+000 result=40 04:30:18 Config A/D Result=40 04:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:18 Get A/D filter: -9.255963e+061 result=40 04:30:18 Get A/D value=-858993460 result=40 04:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:18 Aux= 04:30:18 Message to Camera, serial 1263 queued 04:30:20 Received message from Master: op=Shutter serial=1267 04:30:20 Shutter LASER close 04:30:21 Received message from Master: op=PointingHead serial=1271 04:30:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:30:21 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:30:21 Point started: ret=0 04:30:21 point_skyscan result=0 04:30:22 Check angles 04:30:22 SkyScan query 04:30:22 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.89<-21526 Statuses=0009 0009 04:30:22 Msec=0 True Az=136.185 Ze=-142.89 Az status=0009 Ze status=0009 04:30:22 Check angles 04:30:22 SkyScan query 04:30:23 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.905<-20127 Statuses=0009 0009 04:30:23 Msec=750 True Az=153.735 Ze=-121.905 Az status=0009 Ze status=0009 04:30:23 Check angles 04:30:23 SkyScan query 04:30:24 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.98<-18732 Statuses=0009 0009 04:30:24 Msec=1500 True Az=171.21 Ze=-100.98 Az status=0009 Ze status=0009 04:30:24 Check angles 04:30:24 SkyScan query 04:30:25 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.025<-17335 Statuses=0008 0009 04:30:25 Msec=2250 True Az=176.025 Ze=-80.025 Az status=0008 Ze status=0009 04:30:25 Check angles 04:30:25 SkyScan query 04:30:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.055<-15937 Statuses=0008 0009 04:30:25 Msec=3000 True Az=175.995 Ze=-59.055 Az status=0008 Ze status=0009 04:30:25 Check angles 04:30:25 SkyScan query 04:30:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:30:26 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:30:26 Message to Master queued w/err=0: serial=1271 error=0 04:30:31 Received message from Master: op=Filter serial=1272 04:30:31 Color wheel filter change from 0 to 0 04:30:31 FLIGetFilterPos err=0 currentPosition=0 04:30:31 FLIGetStepsRemaining err=0 RemainingSteps=0 04:30:31 Filter is already there-color wheel unchanged 04:30:31 Received message from Master: op=Shutter serial=1273 04:30:31 Shutter LASER close 04:30:31 Received message from Camera: op=State serial=1275 04:30:31 GetSingleValue result=40 Value=cccccccc 04:30:31 SkyScan query 04:30:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:30:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:32 Parameters OK 04:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:32 Set A/D data flow result=40 04:30:32 Set A/D channel type result=40 04:30:32 Set A/D encoding result=40 04:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:32 Set channel filter=0.000000e+000 result=40 04:30:32 Config A/D Result=40 04:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:32 Get A/D filter: -9.255963e+061 result=40 04:30:32 Get A/D value=-858993460 result=40 04:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:30:32 Parameters OK 04:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:30:32 Set A/D data flow result=40 04:30:32 Set A/D channel type result=40 04:30:32 Set A/D encoding result=40 04:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:30:32 Set channel filter=0.000000e+000 result=40 04:30:32 Config A/D Result=40 04:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:30:32 Get A/D filter: -9.255963e+061 result=40 04:30:32 Get A/D value=-858993460 result=40 04:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:30:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:30:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:30:32 Aux= 04:30:32 Message to Camera, serial 1275 queued 04:31:03 Received message from Master: op=PointingHead serial=1282 04:31:03 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:31:03 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:31:03 Point started: ret=0 04:31:03 point_skyscan result=0 04:31:04 Check angles 04:31:04 SkyScan query 04:31:05 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.375<-13425 Statuses=0009 0009 04:31:05 Msec=0 True Az=152.67 Ze=-21.375 Az status=0009 Ze status=0009 04:31:05 Check angles 04:31:05 SkyScan query 04:31:05 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.39<-12026 Statuses=0009 0009 04:31:05 Msec=750 True Az=135.195 Ze=-0.39 Az status=0009 Ze status=0009 04:31:05 Check angles 04:31:05 SkyScan query 04:31:06 SkyScan query done: ret=0 az=117.615<-7841 ze=20.565<-10629 Statuses=0009 0009 04:31:06 Msec=1500 True Az=117.615 Ze=20.565 Az status=0009 Ze status=0009 04:31:06 Check angles 04:31:06 SkyScan query 04:31:07 SkyScan query done: ret=0 az=100.245<-6683 ze=41.52<-9232 Statuses=0009 0009 04:31:07 Msec=2250 True Az=100.245 Ze=41.52 Az status=0009 Ze status=0009 04:31:07 Check angles 04:31:07 SkyScan query 04:31:08 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:31:08 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:31:08 Check angles 04:31:08 SkyScan query 04:31:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:31:08 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:31:08 Message to Master queued w/err=0: serial=1282 error=0 04:31:13 Received message from Master: op=Filter serial=1283 04:31:13 Color wheel filter change from 0 to 0 04:31:13 FLIGetFilterPos err=0 currentPosition=0 04:31:13 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:13 Filter is already there-color wheel unchanged 04:31:13 Received message from Master: op=Shutter serial=1284 04:31:13 Shutter LASER close 04:31:13 Received message from Camera: op=State serial=1286 04:31:13 GetSingleValue result=40 Value=cccccccc 04:31:13 SkyScan query 04:31:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:31:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:14 Parameters OK 04:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:14 Set A/D data flow result=40 04:31:14 Set A/D channel type result=40 04:31:14 Set A/D encoding result=40 04:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:14 Set channel filter=0.000000e+000 result=40 04:31:14 Config A/D Result=40 04:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:14 Get A/D filter: -9.255963e+061 result=40 04:31:14 Get A/D value=-858993460 result=40 04:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:14 Parameters OK 04:31:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:14 Set A/D data flow result=40 04:31:14 Set A/D channel type result=40 04:31:14 Set A/D encoding result=40 04:31:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:14 Set channel filter=0.000000e+000 result=40 04:31:14 Config A/D Result=40 04:31:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:14 Get A/D filter: -9.255963e+061 result=40 04:31:14 Get A/D value=-858993460 result=40 04:31:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:14 Aux= 04:31:14 Message to Camera, serial 1286 queued 04:31:45 Received message from Master: op=PointingHead serial=1293 04:31:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:31:45 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:31:45 Point started: ret=0 04:31:45 point_skyscan result=0 04:31:46 Check angles 04:31:46 SkyScan query 04:31:47 SkyScan query done: ret=0 az=109.44<-7296 ze=38.49<-9434 Statuses=0009 0008 04:31:47 Msec=0 True Az=109.44 Ze=38.49 Az status=0009 Ze status=0008 04:31:47 Check angles 04:31:47 SkyScan query 04:31:47 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 04:31:47 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 04:31:48 Check angles 04:31:48 SkyScan query 04:31:48 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 04:31:48 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 04:31:48 Check angles 04:31:48 SkyScan query 04:31:49 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 04:31:49 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 04:31:49 Check angles 04:31:49 SkyScan query 04:31:50 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:31:50 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:31:50 Check angles 04:31:50 SkyScan query 04:31:50 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:31:50 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:31:50 Message to Master queued w/err=0: serial=1293 error=0 04:31:55 Received message from Master: op=Filter serial=1294 04:31:55 Color wheel filter change from 0 to 0 04:31:55 FLIGetFilterPos err=0 currentPosition=0 04:31:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:31:55 Filter is already there-color wheel unchanged 04:31:56 Received message from Master: op=Shutter serial=1295 04:31:56 Shutter LASER close 04:31:56 Received message from Camera: op=State serial=1297 04:31:56 GetSingleValue result=40 Value=cccccccc 04:31:56 SkyScan query 04:31:56 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:56 Parameters OK 04:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:56 Set A/D data flow result=40 04:31:56 Set A/D channel type result=40 04:31:56 Set A/D encoding result=40 04:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:56 Set channel filter=0.000000e+000 result=40 04:31:56 Config A/D Result=40 04:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:56 Get A/D filter: -9.255963e+061 result=40 04:31:56 Get A/D value=-858993460 result=40 04:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:31:56 Parameters OK 04:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:31:56 Set A/D data flow result=40 04:31:56 Set A/D channel type result=40 04:31:56 Set A/D encoding result=40 04:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:31:56 Set channel filter=0.000000e+000 result=40 04:31:56 Config A/D Result=40 04:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:31:56 Get A/D filter: -9.255963e+061 result=40 04:31:56 Get A/D value=-858993460 result=40 04:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:31:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:31:56 Aux= 04:31:56 Message to Camera, serial 1297 queued [UTC 2018-12-4 04:32:09] 04:32:27 Received message from Master: op=PointingHead serial=1304 04:32:27 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:32:27 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:32:27 Point started: ret=0 04:32:27 point_skyscan result=0 04:32:28 Check angles 04:32:28 SkyScan query 04:32:29 SkyScan query done: ret=0 az=153.12<-10208 ze=8.79<-11414 Statuses=0009 0009 04:32:29 Msec=0 True Az=153.12 Ze=8.79 Az status=0009 Ze status=0009 04:32:29 Check angles 04:32:29 SkyScan query 04:32:29 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.135<-12809 Statuses=0009 0009 04:32:29 Msec=750 True Az=135.6 Ze=-12.135 Az status=0009 Ze status=0009 04:32:30 Check angles 04:32:30 SkyScan query 04:32:30 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.075<-14205 Statuses=0009 0009 04:32:30 Msec=1500 True Az=118.125 Ze=-33.075 Az status=0009 Ze status=0009 04:32:30 Check angles 04:32:30 SkyScan query 04:32:31 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 04:32:31 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 04:32:31 Check angles 04:32:31 SkyScan query 04:32:32 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 04:32:32 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 04:32:32 Check angles 04:32:32 SkyScan query 04:32:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:32:32 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:32:32 Message to Master queued w/err=0: serial=1304 error=0 04:32:37 Received message from Master: op=Filter serial=1305 04:32:37 Color wheel filter change from 0 to 0 04:32:37 FLIGetFilterPos err=0 currentPosition=0 04:32:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:32:37 Filter is already there-color wheel unchanged 04:32:38 Received message from Master: op=Shutter serial=1306 04:32:38 Shutter LASER close 04:32:38 Received message from Camera: op=State serial=1308 04:32:38 GetSingleValue result=40 Value=cccccccc 04:32:38 SkyScan query 04:32:38 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:32:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:38 Parameters OK 04:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:38 Set A/D data flow result=40 04:32:38 Set A/D channel type result=40 04:32:38 Set A/D encoding result=40 04:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:38 Set channel filter=0.000000e+000 result=40 04:32:38 Config A/D Result=40 04:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:38 Get A/D filter: -9.255963e+061 result=40 04:32:38 Get A/D value=-858993460 result=40 04:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:32:38 Parameters OK 04:32:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:32:38 Set A/D data flow result=40 04:32:38 Set A/D channel type result=40 04:32:38 Set A/D encoding result=40 04:32:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:32:38 Set channel filter=0.000000e+000 result=40 04:32:38 Config A/D Result=40 04:32:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:32:38 Get A/D filter: -9.255963e+061 result=40 04:32:38 Get A/D value=-858993460 result=40 04:32:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:32:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:32:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:32:38 Aux= 04:32:38 Message to Camera, serial 1308 queued 04:33:09 Received message from Master: op=PointingHead serial=1315 04:33:09 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:33:09 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:33:09 Point started: ret=0 04:33:09 point_skyscan result=0 04:33:10 Check angles 04:33:10 SkyScan query 04:33:11 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.375<-17425 Statuses=0009 0009 04:33:11 Msec=0 True Az=109.02 Ze=-81.375 Az status=0009 Ze status=0009 04:33:11 Check angles 04:33:11 SkyScan query 04:33:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.315<-18821 Statuses=0008 0009 04:33:12 Msec=750 True Az=113.01 Ze=-102.315 Az status=0008 Ze status=0009 04:33:12 Check angles 04:33:12 SkyScan query 04:33:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.27<-20218 Statuses=0008 0009 04:33:12 Msec=1500 True Az=113.01 Ze=-123.27 Az status=0008 Ze status=0009 04:33:12 Check angles 04:33:12 SkyScan query 04:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.225<-21615 Statuses=0008 0009 04:33:13 Msec=2250 True Az=112.995 Ze=-144.225 Az status=0008 Ze status=0009 04:33:13 Check angles 04:33:13 SkyScan query 04:33:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.195<-23013 Statuses=0008 0009 04:33:14 Msec=3000 True Az=112.995 Ze=-165.195 Az status=0008 Ze status=0009 04:33:14 Check angles 04:33:14 SkyScan query 04:33:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:33:15 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:33:15 Message to Master queued w/err=0: serial=1315 error=0 04:33:20 Received message from Master: op=Filter serial=1316 04:33:20 Color wheel filter change from 0 to 0 04:33:20 FLIGetFilterPos err=0 currentPosition=0 04:33:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:20 Filter is already there-color wheel unchanged 04:33:20 Received message from Master: op=Shutter serial=1317 04:33:20 Shutter LASER open 04:33:20 Received message from Camera: op=State serial=1319 04:33:20 GetSingleValue result=40 Value=cccccccc 04:33:20 SkyScan query 04:33:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:33:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:20 Parameters OK 04:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:20 Set A/D data flow result=40 04:33:20 Set A/D channel type result=40 04:33:20 Set A/D encoding result=40 04:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:20 Set channel filter=0.000000e+000 result=40 04:33:20 Config A/D Result=40 04:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:20 Get A/D filter: -9.255963e+061 result=40 04:33:20 Get A/D value=-858993460 result=40 04:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:20 Parameters OK 04:33:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:20 Set A/D data flow result=40 04:33:20 Set A/D channel type result=40 04:33:20 Set A/D encoding result=40 04:33:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:20 Set channel filter=0.000000e+000 result=40 04:33:20 Config A/D Result=40 04:33:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:20 Get A/D filter: -9.255963e+061 result=40 04:33:20 Get A/D value=-858993460 result=40 04:33:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:20 Aux= 04:33:20 Message to Camera, serial 1319 queued 04:33:23 Received message from Master: op=Shutter serial=1323 04:33:23 Shutter LASER close 04:33:23 Received message from Master: op=PointingHead serial=1327 04:33:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:33:23 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:33:24 Point started: ret=0 04:33:24 point_skyscan result=0 04:33:24 Check angles 04:33:24 SkyScan query 04:33:25 SkyScan query done: ret=0 az=89.94<-5996 ze=157.305<-1513 Statuses=0009 0009 04:33:25 Msec=0 True Az=89.94 Ze=157.305 Az status=0009 Ze status=0009 04:33:25 Check angles 04:33:25 SkyScan query 04:33:26 SkyScan query done: ret=0 az=72.54<-4836 ze=136.335<-2911 Statuses=0009 0009 04:33:26 Msec=750 True Az=72.54 Ze=136.335 Az status=0009 Ze status=0009 04:33:26 Check angles 04:33:26 SkyScan query 04:33:27 SkyScan query done: ret=0 az=54.78<-3652 ze=114.99<-4334 Statuses=0009 0009 04:33:27 Msec=1500 True Az=54.78 Ze=114.99 Az status=0009 Ze status=0009 04:33:27 Check angles 04:33:27 SkyScan query 04:33:27 SkyScan query done: ret=0 az=40.98<-2732 ze=94.005<-5733 Statuses=0009 0009 04:33:27 Msec=2250 True Az=40.98 Ze=94.005 Az status=0009 Ze status=0009 04:33:27 Check angles 04:33:27 SkyScan query 04:33:28 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 04:33:28 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 04:33:28 Check angles 04:33:28 SkyScan query 04:33:29 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 04:33:29 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 04:33:29 Check angles 04:33:29 SkyScan query 04:33:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:33:30 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:33:30 Message to Master queued w/err=0: serial=1327 error=0 04:33:35 Received message from Master: op=Filter serial=1328 04:33:35 Color wheel filter change from 0 to 0 04:33:35 FLIGetFilterPos err=0 currentPosition=0 04:33:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:33:35 Filter is already there-color wheel unchanged 04:33:35 Received message from Master: op=Shutter serial=1329 04:33:35 Shutter LASER close 04:33:35 Received message from Camera: op=State serial=1331 04:33:35 GetSingleValue result=40 Value=cccccccc 04:33:35 SkyScan query 04:33:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:33:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:35 Parameters OK 04:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:35 Set A/D data flow result=40 04:33:35 Set A/D channel type result=40 04:33:35 Set A/D encoding result=40 04:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:35 Set channel filter=0.000000e+000 result=40 04:33:35 Config A/D Result=40 04:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:35 Get A/D filter: -9.255963e+061 result=40 04:33:35 Get A/D value=-858993460 result=40 04:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:33:35 Parameters OK 04:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:33:35 Set A/D data flow result=40 04:33:35 Set A/D channel type result=40 04:33:35 Set A/D encoding result=40 04:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:33:35 Set channel filter=0.000000e+000 result=40 04:33:35 Config A/D Result=40 04:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:33:35 Get A/D filter: -9.255963e+061 result=40 04:33:35 Get A/D value=-858993460 result=40 04:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:33:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:33:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:33:35 Aux= 04:33:35 Message to Camera, serial 1331 queued 04:34:06 Received message from Master: op=PointingHead serial=1338 04:34:06 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:34:06 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:34:07 Point started: ret=0 04:34:07 point_skyscan result=0 04:34:08 Check angles 04:34:08 SkyScan query 04:34:08 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 04:34:08 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 04:34:08 Check angles 04:34:08 SkyScan query 04:34:09 SkyScan query done: ret=0 az=81.435<-5429 ze=66.495<-7567 Statuses=0009 0008 04:34:09 Msec=750 True Az=81.435 Ze=66.495 Az status=0009 Ze status=0008 04:34:09 Check angles 04:34:09 SkyScan query 04:34:10 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 04:34:10 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 04:34:10 Check angles 04:34:10 SkyScan query 04:34:10 SkyScan query done: ret=0 az=116.7<-7780 ze=66.495<-7567 Statuses=0009 0008 04:34:10 Msec=2250 True Az=116.7 Ze=66.495 Az status=0009 Ze status=0008 04:34:11 Check angles 04:34:11 SkyScan query 04:34:11 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 04:34:11 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 04:34:11 Check angles 04:34:11 SkyScan query 04:34:12 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 04:34:12 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 04:34:12 Check angles 04:34:12 SkyScan query 04:34:13 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 04:34:13 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 04:34:13 Message to Master queued w/err=0: serial=1338 error=0 04:34:18 Received message from Master: op=Filter serial=1339 04:34:18 Color wheel filter change from 0 to 0 04:34:18 FLIGetFilterPos err=0 currentPosition=0 04:34:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:34:18 Filter is already there-color wheel unchanged 04:34:18 Received message from Master: op=Shutter serial=1340 04:34:18 Shutter LASER close 04:34:18 Received message from Camera: op=State serial=1342 04:34:18 GetSingleValue result=40 Value=cccccccc 04:34:18 SkyScan query 04:34:18 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:34:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:18 Parameters OK 04:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:18 Set A/D data flow result=40 04:34:18 Set A/D channel type result=40 04:34:18 Set A/D encoding result=40 04:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:18 Set channel filter=0.000000e+000 result=40 04:34:18 Config A/D Result=40 04:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:18 Get A/D filter: -9.255963e+061 result=40 04:34:18 Get A/D value=-858993460 result=40 04:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:34:18 Parameters OK 04:34:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:34:18 Set A/D data flow result=40 04:34:18 Set A/D channel type result=40 04:34:18 Set A/D encoding result=40 04:34:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:34:18 Set channel filter=0.000000e+000 result=40 04:34:18 Config A/D Result=40 04:34:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:34:18 Get A/D filter: -9.255963e+061 result=40 04:34:18 Get A/D value=-858993460 result=40 04:34:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:34:18 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:34:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:34:18 Aux= 04:34:18 Message to Camera, serial 1342 queued 04:34:49 Received message from Master: op=PointingHead serial=1349 04:34:49 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:34:49 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:34:50 Point started: ret=0 04:34:50 point_skyscan result=0 04:34:50 Check angles 04:34:50 SkyScan query 04:34:51 SkyScan query done: ret=0 az=134.85<-8990 ze=36.57<-9562 Statuses=0009 0009 04:34:51 Msec=0 True Az=134.85 Ze=36.57 Az status=0009 Ze status=0009 04:34:51 Check angles 04:34:51 SkyScan query 04:34:52 SkyScan query done: ret=0 az=117.285<-7819 ze=15.615<-10959 Statuses=0009 0009 04:34:52 Msec=750 True Az=117.285 Ze=15.615 Az status=0009 Ze status=0009 04:34:52 Check angles 04:34:52 SkyScan query 04:34:52 SkyScan query done: ret=0 az=100.02<-6668 ze=-5.355<-12357 Statuses=0009 0009 04:34:52 Msec=1500 True Az=100.02 Ze=-5.355 Az status=0009 Ze status=0009 04:34:53 Check angles 04:34:53 SkyScan query 04:34:53 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.325<-13755 Statuses=0009 0009 04:34:53 Msec=2250 True Az=82.425 Ze=-26.325 Az status=0009 Ze status=0009 04:34:53 Check angles 04:34:53 SkyScan query 04:34:54 SkyScan query done: ret=0 az=65.07<-4338 ze=-38.565<-14571 Statuses=0009 0008 04:34:54 Msec=3000 True Az=65.07 Ze=-38.565 Az status=0009 Ze status=0008 04:34:54 Check angles 04:34:54 SkyScan query 04:34:55 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.535<-14569 Statuses=0009 0008 04:34:55 Msec=3750 True Az=47.505 Ze=-38.535 Az status=0009 Ze status=0008 04:34:55 Check angles 04:34:55 SkyScan query 04:34:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:34:55 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:34:55 Message to Master queued w/err=0: serial=1349 error=0 04:35:00 Received message from Master: op=Filter serial=1350 04:35:00 Color wheel filter change from 0 to 0 04:35:00 FLIGetFilterPos err=0 currentPosition=0 04:35:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:00 Filter is already there-color wheel unchanged 04:35:01 Received message from Master: op=Shutter serial=1351 04:35:01 Shutter LASER close 04:35:01 Received message from Camera: op=State serial=1353 04:35:01 GetSingleValue result=40 Value=cccccccc 04:35:01 SkyScan query 04:35:01 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:35:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:01 Parameters OK 04:35:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:01 Set A/D data flow result=40 04:35:01 Set A/D channel type result=40 04:35:01 Set A/D encoding result=40 04:35:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:01 Set channel filter=0.000000e+000 result=40 04:35:01 Config A/D Result=40 04:35:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:01 Get A/D filter: -9.255963e+061 result=40 04:35:01 Get A/D value=-858993460 result=40 04:35:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:01 Parameters OK 04:35:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:01 Set A/D data flow result=40 04:35:01 Set A/D channel type result=40 04:35:01 Set A/D encoding result=40 04:35:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:01 Set channel filter=0.000000e+000 result=40 04:35:01 Config A/D Result=40 04:35:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:01 Get A/D filter: -9.255963e+061 result=40 04:35:01 Get A/D value=-858993460 result=40 04:35:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:01 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:01 Aux= 04:35:01 Message to Camera, serial 1353 queued 04:35:32 Received message from Master: op=PointingHead serial=1360 04:35:32 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:35:32 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:35:32 Point started: ret=0 04:35:32 point_skyscan result=0 04:35:33 Check angles 04:35:33 SkyScan query 04:35:34 SkyScan query done: ret=0 az=64.08<-4272 ze=-68.535<-16569 Statuses=0009 0009 04:35:34 Msec=0 True Az=64.08 Ze=-68.535 Az status=0009 Ze status=0009 04:35:34 Check angles 04:35:34 SkyScan query 04:35:35 SkyScan query done: ret=0 az=82.11<-5474 ze=-89.925<-17995 Statuses=0009 0009 04:35:35 Msec=750 True Az=82.11 Ze=-89.925 Az status=0009 Ze status=0009 04:35:35 Check angles 04:35:35 SkyScan query 04:35:35 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.88<-19392 Statuses=0009 0009 04:35:35 Msec=1500 True Az=99.54 Ze=-110.88 Az status=0009 Ze status=0009 04:35:35 Check angles 04:35:35 SkyScan query 04:35:36 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.82<-20788 Statuses=0009 0009 04:35:36 Msec=2250 True Az=116.955 Ze=-131.82 Az status=0009 Ze status=0009 04:35:36 Check angles 04:35:36 SkyScan query 04:35:37 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 04:35:37 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 04:35:37 Check angles 04:35:37 SkyScan query 04:35:38 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:35:38 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:35:38 Message to Master queued w/err=0: serial=1360 error=0 04:35:43 Received message from Master: op=Filter serial=1361 04:35:43 Color wheel filter change from 0 to 0 04:35:43 FLIGetFilterPos err=0 currentPosition=0 04:35:43 FLIGetStepsRemaining err=0 RemainingSteps=0 04:35:43 Filter is already there-color wheel unchanged 04:35:43 Received message from Master: op=Shutter serial=1362 04:35:43 Shutter LASER close 04:35:43 Received message from Camera: op=State serial=1364 04:35:43 GetSingleValue result=40 Value=cccccccc 04:35:43 SkyScan query 04:35:43 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:35:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:43 Parameters OK 04:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:43 Set A/D data flow result=40 04:35:43 Set A/D channel type result=40 04:35:43 Set A/D encoding result=40 04:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:43 Set channel filter=0.000000e+000 result=40 04:35:43 Config A/D Result=40 04:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:43 Get A/D filter: -9.255963e+061 result=40 04:35:43 Get A/D value=-858993460 result=40 04:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:35:43 Parameters OK 04:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:35:43 Set A/D data flow result=40 04:35:43 Set A/D channel type result=40 04:35:43 Set A/D encoding result=40 04:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:35:43 Set channel filter=0.000000e+000 result=40 04:35:43 Config A/D Result=40 04:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:35:43 Get A/D filter: -9.255963e+061 result=40 04:35:43 Get A/D value=-858993460 result=40 04:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:35:43 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:35:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:35:43 Aux= 04:35:43 Message to Camera, serial 1364 queued 04:36:14 Received message from Master: op=PointingHead serial=1371 04:36:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:36:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:36:15 Point started: ret=0 04:36:15 point_skyscan result=0 04:36:15 Check angles 04:36:15 SkyScan query 04:36:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.255<-23417 Statuses=0009 0009 04:36:16 Msec=0 True Az=113.01 Ze=-171.255 Az status=0009 Ze status=0009 04:36:16 Check angles 04:36:16 SkyScan query 04:36:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:36:17 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:36:17 Message to Master queued w/err=0: serial=1371 error=0 04:36:22 Received message from Master: op=Filter serial=1372 04:36:22 Color wheel filter change from 0 to 0 04:36:22 FLIGetFilterPos err=0 currentPosition=0 04:36:22 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:22 Filter is already there-color wheel unchanged 04:36:22 Received message from Master: op=Shutter serial=1373 04:36:22 Shutter LASER open 04:36:22 Received message from Camera: op=State serial=1375 04:36:22 GetSingleValue result=40 Value=cccccccc 04:36:22 SkyScan query 04:36:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:36:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:23 Parameters OK 04:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:23 Set A/D data flow result=40 04:36:23 Set A/D channel type result=40 04:36:23 Set A/D encoding result=40 04:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:23 Set channel filter=0.000000e+000 result=40 04:36:23 Config A/D Result=40 04:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:23 Get A/D filter: -9.255963e+061 result=40 04:36:23 Get A/D value=-858993460 result=40 04:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:23 Parameters OK 04:36:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:23 Set A/D data flow result=40 04:36:23 Set A/D channel type result=40 04:36:23 Set A/D encoding result=40 04:36:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:23 Set channel filter=0.000000e+000 result=40 04:36:23 Config A/D Result=40 04:36:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:23 Get A/D filter: -9.255963e+061 result=40 04:36:23 Get A/D value=-858993460 result=40 04:36:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:23 Aux= 04:36:23 Message to Camera, serial 1375 queued 04:36:25 Received message from Master: op=Shutter serial=1379 04:36:25 Shutter LASER close 04:36:26 Received message from Master: op=PointingHead serial=1383 04:36:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:36:26 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:36:26 Point started: ret=0 04:36:26 point_skyscan result=0 04:36:27 Check angles 04:36:27 SkyScan query 04:36:27 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.995<-21533 Statuses=0009 0009 04:36:27 Msec=0 True Az=136.185 Ze=-142.995 Az status=0009 Ze status=0009 04:36:27 Check angles 04:36:27 SkyScan query 04:36:28 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.025<-20135 Statuses=0009 0009 04:36:28 Msec=750 True Az=153.675 Ze=-122.025 Az status=0009 Ze status=0009 04:36:28 Check angles 04:36:28 SkyScan query 04:36:29 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.1<-18740 Statuses=0009 0009 04:36:29 Msec=1500 True Az=171.21 Ze=-101.1 Az status=0009 Ze status=0009 04:36:29 Check angles 04:36:29 SkyScan query 04:36:30 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 04:36:30 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 04:36:30 Check angles 04:36:30 SkyScan query 04:36:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.175<-15945 Statuses=0008 0009 04:36:30 Msec=3000 True Az=175.995 Ze=-59.175 Az status=0008 Ze status=0009 04:36:30 Check angles 04:36:30 SkyScan query 04:36:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:36:31 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:36:31 Message to Master queued w/err=0: serial=1383 error=0 04:36:36 Received message from Master: op=Filter serial=1384 04:36:36 Color wheel filter change from 0 to 0 04:36:36 FLIGetFilterPos err=0 currentPosition=0 04:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 04:36:36 Filter is already there-color wheel unchanged 04:36:36 Received message from Master: op=Shutter serial=1385 04:36:36 Shutter LASER close 04:36:36 Received message from Camera: op=State serial=1387 04:36:36 GetSingleValue result=40 Value=cccccccc 04:36:36 SkyScan query 04:36:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:37 Parameters OK 04:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:37 Set A/D data flow result=40 04:36:37 Set A/D channel type result=40 04:36:37 Set A/D encoding result=40 04:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:37 Set channel filter=0.000000e+000 result=40 04:36:37 Config A/D Result=40 04:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:37 Get A/D filter: -9.255963e+061 result=40 04:36:37 Get A/D value=-858993460 result=40 04:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:36:37 Parameters OK 04:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:36:37 Set A/D data flow result=40 04:36:37 Set A/D channel type result=40 04:36:37 Set A/D encoding result=40 04:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:36:37 Set channel filter=0.000000e+000 result=40 04:36:37 Config A/D Result=40 04:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:36:37 Get A/D filter: -9.255963e+061 result=40 04:36:37 Get A/D value=-858993460 result=40 04:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:36:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:36:37 Aux= 04:36:37 Message to Camera, serial 1387 queued 04:37:08 Received message from Master: op=PointingHead serial=1394 04:37:08 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:37:08 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:37:08 Point started: ret=0 04:37:08 point_skyscan result=0 04:37:09 Check angles 04:37:09 SkyScan query 04:37:09 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.69<-13446 Statuses=0009 0009 04:37:09 Msec=0 True Az=152.94 Ze=-21.69 Az status=0009 Ze status=0009 04:37:10 Check angles 04:37:10 SkyScan query 04:37:10 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.735<-12049 Statuses=0009 0009 04:37:10 Msec=750 True Az=135.465 Ze=-0.735 Az status=0009 Ze status=0009 04:37:10 Check angles 04:37:10 SkyScan query 04:37:11 SkyScan query done: ret=0 az=118.005<-7867 ze=20.205<-10653 Statuses=0009 0009 04:37:11 Msec=1500 True Az=118.005 Ze=20.205 Az status=0009 Ze status=0009 04:37:11 Check angles 04:37:11 SkyScan query 04:37:12 SkyScan query done: ret=0 az=100.245<-6683 ze=41.595<-9227 Statuses=0009 0009 04:37:12 Msec=2250 True Az=100.245 Ze=41.595 Az status=0009 Ze status=0009 04:37:12 Check angles 04:37:12 SkyScan query 04:37:13 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:37:13 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:37:13 Check angles 04:37:13 SkyScan query 04:37:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:37:13 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:37:13 Message to Master queued w/err=0: serial=1394 error=0 04:37:18 Received message from Master: op=Filter serial=1395 04:37:18 Color wheel filter change from 0 to 0 04:37:18 FLIGetFilterPos err=0 currentPosition=0 04:37:18 FLIGetStepsRemaining err=0 RemainingSteps=0 04:37:18 Filter is already there-color wheel unchanged 04:37:18 Received message from Master: op=Shutter serial=1396 04:37:18 Shutter LASER close 04:37:18 Received message from Camera: op=State serial=1398 04:37:18 GetSingleValue result=40 Value=cccccccc 04:37:18 SkyScan query 04:37:19 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:37:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:19 Parameters OK 04:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:19 Set A/D data flow result=40 04:37:19 Set A/D channel type result=40 04:37:19 Set A/D encoding result=40 04:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:19 Set channel filter=0.000000e+000 result=40 04:37:19 Config A/D Result=40 04:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:19 Get A/D filter: -9.255963e+061 result=40 04:37:19 Get A/D value=-858993460 result=40 04:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:37:19 Parameters OK 04:37:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:37:19 Set A/D data flow result=40 04:37:19 Set A/D channel type result=40 04:37:19 Set A/D encoding result=40 04:37:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:37:19 Set channel filter=0.000000e+000 result=40 04:37:19 Config A/D Result=40 04:37:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:37:19 Get A/D filter: -9.255963e+061 result=40 04:37:19 Get A/D value=-858993460 result=40 04:37:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:37:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:37:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:37:19 Aux= 04:37:19 Message to Camera, serial 1398 queued 04:37:50 Received message from Master: op=PointingHead serial=1405 04:37:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:37:50 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:37:50 Point started: ret=0 04:37:50 point_skyscan result=0 04:37:51 Check angles 04:37:51 SkyScan query 04:37:52 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 04:37:52 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 04:37:52 Check angles 04:37:52 SkyScan query 04:37:52 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 04:37:52 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 04:37:53 Check angles 04:37:53 SkyScan query 04:37:53 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 04:37:53 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 04:37:53 Check angles 04:37:53 SkyScan query 04:37:54 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 04:37:54 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 04:37:54 Check angles 04:37:54 SkyScan query 04:37:55 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:37:55 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:37:55 Check angles 04:37:55 SkyScan query 04:37:55 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:37:55 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:37:55 Message to Master queued w/err=0: serial=1405 error=0 04:38:00 Received message from Master: op=Filter serial=1406 04:38:00 Color wheel filter change from 0 to 0 04:38:00 FLIGetFilterPos err=0 currentPosition=0 04:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:00 Filter is already there-color wheel unchanged 04:38:01 Received message from Master: op=Shutter serial=1407 04:38:01 Shutter LASER close 04:38:01 Received message from Camera: op=State serial=1409 04:38:01 GetSingleValue result=40 Value=cccccccc 04:38:01 SkyScan query 04:38:01 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:01 Parameters OK 04:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:01 Set A/D data flow result=40 04:38:01 Set A/D channel type result=40 04:38:01 Set A/D encoding result=40 04:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:01 Set channel filter=0.000000e+000 result=40 04:38:01 Config A/D Result=40 04:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:01 Get A/D filter: -9.255963e+061 result=40 04:38:01 Get A/D value=-858993460 result=40 04:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:01 Parameters OK 04:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:01 Set A/D data flow result=40 04:38:01 Set A/D channel type result=40 04:38:01 Set A/D encoding result=40 04:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:01 Set channel filter=0.000000e+000 result=40 04:38:01 Config A/D Result=40 04:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:01 Get A/D filter: -9.255963e+061 result=40 04:38:01 Get A/D value=-858993460 result=40 04:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:01 Aux= 04:38:01 Message to Camera, serial 1409 queued 04:38:32 Received message from Master: op=PointingHead serial=1416 04:38:32 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:38:32 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:38:32 Point started: ret=0 04:38:32 point_skyscan result=0 04:38:33 Check angles 04:38:33 SkyScan query 04:38:34 SkyScan query done: ret=0 az=153.24<-10216 ze=8.94<-11404 Statuses=0009 0009 04:38:34 Msec=0 True Az=153.24 Ze=8.94 Az status=0009 Ze status=0009 04:38:34 Check angles 04:38:34 SkyScan query 04:38:34 SkyScan query done: ret=0 az=135.735<-9049 ze=-11.97<-12798 Statuses=0009 0009 04:38:34 Msec=750 True Az=135.735 Ze=-11.97 Az status=0009 Ze status=0009 04:38:35 Check angles 04:38:35 SkyScan query 04:38:35 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.94<-14196 Statuses=0009 0009 04:38:35 Msec=1500 True Az=118.29 Ze=-32.94 Az status=0009 Ze status=0009 04:38:35 Check angles 04:38:35 SkyScan query 04:38:36 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.495<-15433 Statuses=0009 0009 04:38:36 Msec=2250 True Az=100.845 Ze=-51.495 Az status=0009 Ze status=0009 04:38:36 Check angles 04:38:36 SkyScan query 04:38:37 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:38:37 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:38:37 Check angles 04:38:37 SkyScan query 04:38:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:38:37 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:38:37 Message to Master queued w/err=0: serial=1416 error=0 04:38:42 Received message from Master: op=Filter serial=1417 04:38:42 Color wheel filter change from 0 to 0 04:38:42 FLIGetFilterPos err=0 currentPosition=0 04:38:42 FLIGetStepsRemaining err=0 RemainingSteps=0 04:38:42 Filter is already there-color wheel unchanged 04:38:43 Received message from Master: op=Shutter serial=1418 04:38:43 Shutter LASER close 04:38:43 Received message from Camera: op=State serial=1420 04:38:43 GetSingleValue result=40 Value=cccccccc 04:38:43 SkyScan query 04:38:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:38:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:43 Parameters OK 04:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:43 Set A/D data flow result=40 04:38:43 Set A/D channel type result=40 04:38:43 Set A/D encoding result=40 04:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:43 Set channel filter=0.000000e+000 result=40 04:38:43 Config A/D Result=40 04:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:43 Get A/D filter: -9.255963e+061 result=40 04:38:43 Get A/D value=-858993460 result=40 04:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:38:43 Parameters OK 04:38:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:38:43 Set A/D data flow result=40 04:38:43 Set A/D channel type result=40 04:38:43 Set A/D encoding result=40 04:38:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:38:43 Set channel filter=0.000000e+000 result=40 04:38:43 Config A/D Result=40 04:38:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:38:43 Get A/D filter: -9.255963e+061 result=40 04:38:43 Get A/D value=-858993460 result=40 04:38:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:38:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:38:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:38:43 Aux= 04:38:43 Message to Camera, serial 1420 queued 04:39:14 Received message from Master: op=PointingHead serial=1427 04:39:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:39:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:39:14 Point started: ret=0 04:39:14 point_skyscan result=0 04:39:15 Check angles 04:39:15 SkyScan query 04:39:16 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.285<-17419 Statuses=0009 0009 04:39:16 Msec=0 True Az=108.96 Ze=-81.285 Az status=0009 Ze status=0009 04:39:16 Check angles 04:39:16 SkyScan query 04:39:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.66<-18844 Statuses=0008 0009 04:39:17 Msec=750 True Az=113.01 Ze=-102.66 Az status=0008 Ze status=0009 04:39:17 Check angles 04:39:17 SkyScan query 04:39:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.6<-20240 Statuses=0008 0009 04:39:17 Msec=1500 True Az=113.01 Ze=-123.6 Az status=0008 Ze status=0009 04:39:17 Check angles 04:39:17 SkyScan query 04:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 04:39:18 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 04:39:18 Check angles 04:39:18 SkyScan query 04:39:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 04:39:19 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 04:39:19 Check angles 04:39:19 SkyScan query 04:39:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:39:20 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:39:20 Message to Master queued w/err=0: serial=1427 error=0 04:39:25 Received message from Master: op=Filter serial=1428 04:39:25 Color wheel filter change from 0 to 0 04:39:25 FLIGetFilterPos err=0 currentPosition=0 04:39:25 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:25 Filter is already there-color wheel unchanged 04:39:25 Received message from Master: op=Shutter serial=1429 04:39:25 Shutter LASER open 04:39:25 Received message from Camera: op=State serial=1431 04:39:25 GetSingleValue result=40 Value=cccccccc 04:39:25 SkyScan query 04:39:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:39:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:25 Parameters OK 04:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:25 Set A/D data flow result=40 04:39:25 Set A/D channel type result=40 04:39:25 Set A/D encoding result=40 04:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:25 Set channel filter=0.000000e+000 result=40 04:39:25 Config A/D Result=40 04:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:25 Get A/D filter: -9.255963e+061 result=40 04:39:25 Get A/D value=-858993460 result=40 04:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:25 Parameters OK 04:39:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:25 Set A/D data flow result=40 04:39:25 Set A/D channel type result=40 04:39:25 Set A/D encoding result=40 04:39:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:25 Set channel filter=0.000000e+000 result=40 04:39:25 Config A/D Result=40 04:39:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:25 Get A/D filter: -9.255963e+061 result=40 04:39:25 Get A/D value=-858993460 result=40 04:39:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:25 Aux= 04:39:25 Message to Camera, serial 1431 queued 04:39:28 Received message from Master: op=Shutter serial=1435 04:39:28 Shutter LASER close 04:39:28 Received message from Master: op=PointingHead serial=1439 04:39:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:39:28 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:39:29 Point started: ret=0 04:39:29 point_skyscan result=0 04:39:30 Check angles 04:39:30 SkyScan query 04:39:30 SkyScan query done: ret=0 az=90.285<-6019 ze=157.53<-1498 Statuses=0009 0009 04:39:30 Msec=0 True Az=90.285 Ze=157.53 Az status=0009 Ze status=0009 04:39:30 Check angles 04:39:30 SkyScan query 04:39:31 SkyScan query done: ret=0 az=72.345<-4823 ze=136.155<-2923 Statuses=0009 0009 04:39:31 Msec=750 True Az=72.345 Ze=136.155 Az status=0009 Ze status=0009 04:39:31 Check angles 04:39:31 SkyScan query 04:39:32 SkyScan query done: ret=0 az=54.93<-3662 ze=115.185<-4321 Statuses=0009 0009 04:39:32 Msec=1500 True Az=54.93 Ze=115.185 Az status=0009 Ze status=0009 04:39:32 Check angles 04:39:32 SkyScan query 04:39:32 SkyScan query done: ret=0 az=41.01<-2734 ze=94.215<-5719 Statuses=0009 0009 04:39:32 Msec=2250 True Az=41.01 Ze=94.215 Az status=0009 Ze status=0009 04:39:33 Check angles 04:39:33 SkyScan query 04:39:33 SkyScan query done: ret=0 az=40.995<-2733 ze=72.825<-7145 Statuses=0008 0009 04:39:33 Msec=3000 True Az=40.995 Ze=72.825 Az status=0008 Ze status=0009 04:39:33 Check angles 04:39:33 SkyScan query 04:39:34 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 04:39:34 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 04:39:34 Check angles 04:39:34 SkyScan query 04:39:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:39:35 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:39:35 Message to Master queued w/err=0: serial=1439 error=0 04:39:40 Received message from Master: op=Filter serial=1440 04:39:40 Color wheel filter change from 0 to 0 04:39:40 FLIGetFilterPos err=0 currentPosition=0 04:39:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:39:40 Filter is already there-color wheel unchanged 04:39:40 Received message from Master: op=Shutter serial=1441 04:39:40 Shutter LASER close 04:39:40 Received message from Camera: op=State serial=1443 04:39:40 GetSingleValue result=40 Value=cccccccc 04:39:40 SkyScan query 04:39:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:41 Parameters OK 04:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:41 Set A/D data flow result=40 04:39:41 Set A/D channel type result=40 04:39:41 Set A/D encoding result=40 04:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:41 Set channel filter=0.000000e+000 result=40 04:39:41 Config A/D Result=40 04:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:41 Get A/D filter: -9.255963e+061 result=40 04:39:41 Get A/D value=-858993460 result=40 04:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:39:41 Parameters OK 04:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:39:41 Set A/D data flow result=40 04:39:41 Set A/D channel type result=40 04:39:41 Set A/D encoding result=40 04:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:39:41 Set channel filter=0.000000e+000 result=40 04:39:41 Config A/D Result=40 04:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:39:41 Get A/D filter: -9.255963e+061 result=40 04:39:41 Get A/D value=-858993460 result=40 04:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:39:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:39:41 Aux= 04:39:41 Message to Camera, serial 1443 queued 04:40:11 Received message from Master: op=PointingHead serial=1450 04:40:11 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:40:11 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:40:12 Point started: ret=0 04:40:12 point_skyscan result=0 04:40:12 Check angles 04:40:12 SkyScan query 04:40:13 SkyScan query done: ret=0 az=64.395<-4293 ze=66.57<-7562 Statuses=0009 0008 04:40:13 Msec=0 True Az=64.395 Ze=66.57 Az status=0009 Ze status=0008 04:40:13 Check angles 04:40:13 SkyScan query 04:40:14 SkyScan query done: ret=0 az=81.885<-5459 ze=66.51<-7566 Statuses=0009 0008 04:40:14 Msec=750 True Az=81.885 Ze=66.51 Az status=0009 Ze status=0008 04:40:14 Check angles 04:40:14 SkyScan query 04:40:15 SkyScan query done: ret=0 az=99.555<-6637 ze=66.51<-7566 Statuses=0009 0008 04:40:15 Msec=1500 True Az=99.555 Ze=66.51 Az status=0009 Ze status=0008 04:40:15 Check angles 04:40:15 SkyScan query 04:40:15 SkyScan query done: ret=0 az=117.015<-7801 ze=66.51<-7566 Statuses=0009 0008 04:40:15 Msec=2250 True Az=117.015 Ze=66.51 Az status=0009 Ze status=0008 04:40:15 Check angles 04:40:15 SkyScan query 04:40:16 SkyScan query done: ret=0 az=134.385<-8959 ze=66.51<-7566 Statuses=0009 0008 04:40:16 Msec=3000 True Az=134.385 Ze=66.51 Az status=0009 Ze status=0008 04:40:16 Check angles 04:40:16 SkyScan query 04:40:17 SkyScan query done: ret=0 az=151.605<-10107 ze=66.51<-7566 Statuses=0009 0008 04:40:17 Msec=3750 True Az=151.605 Ze=66.51 Az status=0009 Ze status=0008 04:40:17 Check angles 04:40:17 SkyScan query 04:40:18 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 04:40:18 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 04:40:18 Message to Master queued w/err=0: serial=1450 error=0 04:40:23 Received message from Master: op=Filter serial=1451 04:40:23 Color wheel filter change from 0 to 0 04:40:23 FLIGetFilterPos err=0 currentPosition=0 04:40:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:40:23 Filter is already there-color wheel unchanged 04:40:23 Received message from Master: op=Shutter serial=1452 04:40:23 Shutter LASER close 04:40:23 Received message from Camera: op=State serial=1454 04:40:23 GetSingleValue result=40 Value=cccccccc 04:40:23 SkyScan query 04:40:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 04:40:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:23 Parameters OK 04:40:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:23 Set A/D data flow result=40 04:40:23 Set A/D channel type result=40 04:40:23 Set A/D encoding result=40 04:40:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:23 Set channel filter=0.000000e+000 result=40 04:40:23 Config A/D Result=40 04:40:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:23 Get A/D filter: -9.255963e+061 result=40 04:40:23 Get A/D value=-858993460 result=40 04:40:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:40:23 Parameters OK 04:40:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:40:23 Set A/D data flow result=40 04:40:23 Set A/D channel type result=40 04:40:23 Set A/D encoding result=40 04:40:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:40:23 Set channel filter=0.000000e+000 result=40 04:40:23 Config A/D Result=40 04:40:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:40:23 Get A/D filter: -9.255963e+061 result=40 04:40:23 Get A/D value=-858993460 result=40 [UTC 2018-12-4 04:40:23] 04:40:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:40:23 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:40:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:40:23 Aux= 04:40:23 Message to Camera, serial 1454 queued 04:40:54 Received message from Master: op=PointingHead serial=1461 04:40:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:40:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:40:55 Point started: ret=0 04:40:55 point_skyscan result=0 04:40:55 Check angles 04:40:55 SkyScan query 04:40:56 SkyScan query done: ret=0 az=135.18<-9012 ze=36.885<-9541 Statuses=0009 0009 04:40:56 Msec=0 True Az=135.18 Ze=36.885 Az status=0009 Ze status=0009 04:40:56 Check angles 04:40:56 SkyScan query 04:40:57 SkyScan query done: ret=0 az=117.645<-7843 ze=15.915<-10939 Statuses=0009 0009 04:40:57 Msec=750 True Az=117.645 Ze=15.915 Az status=0009 Ze status=0009 04:40:57 Check angles 04:40:57 SkyScan query 04:40:57 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.025<-12335 Statuses=0009 0009 04:40:57 Msec=1500 True Az=100.245 Ze=-5.025 Az status=0009 Ze status=0009 04:40:58 Check angles 04:40:58 SkyScan query 04:40:58 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.445<-13763 Statuses=0009 0009 04:40:58 Msec=2250 True Az=82.305 Ze=-26.445 Az status=0009 Ze status=0009 04:40:58 Check angles 04:40:58 SkyScan query 04:40:59 SkyScan query done: ret=0 az=64.965<-4331 ze=-38.565<-14571 Statuses=0009 0008 04:40:59 Msec=3000 True Az=64.965 Ze=-38.565 Az status=0009 Ze status=0008 04:40:59 Check angles 04:40:59 SkyScan query 04:41:00 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.535<-14569 Statuses=0009 0008 04:41:00 Msec=3750 True Az=47.4 Ze=-38.535 Az status=0009 Ze status=0008 04:41:00 Check angles 04:41:00 SkyScan query 04:41:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:41:00 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:41:00 Message to Master queued w/err=0: serial=1461 error=0 04:41:05 Received message from Master: op=Filter serial=1462 04:41:05 Color wheel filter change from 0 to 0 04:41:05 FLIGetFilterPos err=0 currentPosition=0 04:41:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:05 Filter is already there-color wheel unchanged 04:41:06 Received message from Master: op=Shutter serial=1463 04:41:06 Shutter LASER close 04:41:06 Received message from Camera: op=State serial=1465 04:41:06 GetSingleValue result=40 Value=cccccccc 04:41:06 SkyScan query 04:41:06 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:41:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:06 Parameters OK 04:41:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:06 Set A/D data flow result=40 04:41:06 Set A/D channel type result=40 04:41:06 Set A/D encoding result=40 04:41:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:06 Set channel filter=0.000000e+000 result=40 04:41:06 Config A/D Result=40 04:41:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:06 Get A/D filter: -9.255963e+061 result=40 04:41:06 Get A/D value=-858993460 result=40 04:41:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:06 Parameters OK 04:41:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:06 Set A/D data flow result=40 04:41:06 Set A/D channel type result=40 04:41:06 Set A/D encoding result=40 04:41:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:06 Set channel filter=0.000000e+000 result=40 04:41:06 Config A/D Result=40 04:41:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:06 Get A/D filter: -9.255963e+061 result=40 04:41:06 Get A/D value=-858993460 result=40 04:41:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:06 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:06 Aux= 04:41:06 Message to Camera, serial 1465 queued 04:41:37 Received message from Master: op=PointingHead serial=1472 04:41:37 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:41:37 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:41:37 Point started: ret=0 04:41:37 point_skyscan result=0 04:41:38 Check angles 04:41:38 SkyScan query 04:41:39 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.64<-16576 Statuses=0009 0009 04:41:39 Msec=0 True Az=64.215 Ze=-68.64 Az status=0009 Ze status=0009 04:41:39 Check angles 04:41:39 SkyScan query 04:41:39 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.595<-17973 Statuses=0009 0009 04:41:39 Msec=750 True Az=81.9 Ze=-89.595 Az status=0009 Ze status=0009 04:41:40 Check angles 04:41:40 SkyScan query 04:41:40 SkyScan query done: ret=0 az=99.69<-6646 ze=-110.97<-19398 Statuses=0009 0009 04:41:40 Msec=1500 True Az=99.69 Ze=-110.97 Az status=0009 Ze status=0009 04:41:40 Check angles 04:41:40 SkyScan query 04:41:41 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.91<-20794 Statuses=0009 0009 04:41:41 Msec=2250 True Az=117.06 Ze=-131.91 Az status=0009 Ze status=0009 04:41:41 Check angles 04:41:41 SkyScan query 04:41:42 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 04:41:42 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 04:41:42 Check angles 04:41:42 SkyScan query 04:41:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:41:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:41:42 Message to Master queued w/err=0: serial=1472 error=0 04:41:47 Received message from Master: op=Filter serial=1473 04:41:47 Color wheel filter change from 0 to 0 04:41:47 FLIGetFilterPos err=0 currentPosition=0 04:41:47 FLIGetStepsRemaining err=0 RemainingSteps=0 04:41:47 Filter is already there-color wheel unchanged 04:41:48 Received message from Master: op=Shutter serial=1474 04:41:48 Shutter LASER close 04:41:48 Received message from Camera: op=State serial=1476 04:41:48 GetSingleValue result=40 Value=cccccccc 04:41:48 SkyScan query 04:41:48 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:41:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:48 Parameters OK 04:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:48 Set A/D data flow result=40 04:41:48 Set A/D channel type result=40 04:41:48 Set A/D encoding result=40 04:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:48 Set channel filter=0.000000e+000 result=40 04:41:48 Config A/D Result=40 04:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:48 Get A/D filter: -9.255963e+061 result=40 04:41:48 Get A/D value=-858993460 result=40 04:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:41:48 Parameters OK 04:41:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:41:48 Set A/D data flow result=40 04:41:48 Set A/D channel type result=40 04:41:48 Set A/D encoding result=40 04:41:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:41:48 Set channel filter=0.000000e+000 result=40 04:41:48 Config A/D Result=40 04:41:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:41:48 Get A/D filter: -9.255963e+061 result=40 04:41:48 Get A/D value=-858993460 result=40 04:41:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:41:48 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:41:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:41:48 Aux= 04:41:48 Message to Camera, serial 1476 queued 04:42:19 Received message from Master: op=PointingHead serial=1483 04:42:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:42:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:42:19 Point started: ret=0 04:42:19 point_skyscan result=0 04:42:20 Check angles 04:42:20 SkyScan query 04:42:21 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.135<-23409 Statuses=0009 0009 04:42:21 Msec=0 True Az=113.025 Ze=-171.135 Az status=0009 Ze status=0009 04:42:21 Check angles 04:42:21 SkyScan query 04:42:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:42:22 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:42:22 Message to Master queued w/err=0: serial=1483 error=0 04:42:27 Received message from Master: op=Filter serial=1484 04:42:27 Color wheel filter change from 0 to 0 04:42:27 FLIGetFilterPos err=0 currentPosition=0 04:42:27 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:27 Filter is already there-color wheel unchanged 04:42:27 Received message from Master: op=Shutter serial=1485 04:42:27 Shutter LASER open 04:42:27 Received message from Camera: op=State serial=1487 04:42:27 GetSingleValue result=40 Value=cccccccc 04:42:27 SkyScan query 04:42:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:42:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:28 Parameters OK 04:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:28 Set A/D data flow result=40 04:42:28 Set A/D channel type result=40 04:42:28 Set A/D encoding result=40 04:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:28 Set channel filter=0.000000e+000 result=40 04:42:28 Config A/D Result=40 04:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:28 Get A/D filter: -9.255963e+061 result=40 04:42:28 Get A/D value=-858993460 result=40 04:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:28 Parameters OK 04:42:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:28 Set A/D data flow result=40 04:42:28 Set A/D channel type result=40 04:42:28 Set A/D encoding result=40 04:42:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:28 Set channel filter=0.000000e+000 result=40 04:42:28 Config A/D Result=40 04:42:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:28 Get A/D filter: -9.255963e+061 result=40 04:42:28 Get A/D value=-858993460 result=40 04:42:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:28 Aux= 04:42:28 Message to Camera, serial 1487 queued 04:42:30 Received message from Master: op=Shutter serial=1491 04:42:30 Shutter LASER close 04:42:31 Received message from Master: op=PointingHead serial=1495 04:42:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:42:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:42:31 Point started: ret=0 04:42:31 point_skyscan result=0 04:42:32 Check angles 04:42:32 SkyScan query 04:42:32 SkyScan query done: ret=0 az=136.215<-9081 ze=-143.01<-21534 Statuses=0009 0009 04:42:32 Msec=0 True Az=136.215 Ze=-143.01 Az status=0009 Ze status=0009 04:42:32 Check angles 04:42:32 SkyScan query 04:42:33 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.04<-20136 Statuses=0009 0009 04:42:33 Msec=750 True Az=153.705 Ze=-122.04 Az status=0009 Ze status=0009 04:42:33 Check angles 04:42:33 SkyScan query 04:42:34 SkyScan query done: ret=0 az=171.12<-11408 ze=-101.085<-18739 Statuses=0009 0009 04:42:34 Msec=1500 True Az=171.12 Ze=-101.085 Az status=0009 Ze status=0009 04:42:34 Check angles 04:42:34 SkyScan query 04:42:34 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 04:42:34 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 04:42:35 Check angles 04:42:35 SkyScan query 04:42:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.755<-15917 Statuses=0008 0009 04:42:35 Msec=3000 True Az=175.995 Ze=-58.755 Az status=0008 Ze status=0009 04:42:35 Check angles 04:42:35 SkyScan query 04:42:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 04:42:36 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 04:42:36 Message to Master queued w/err=0: serial=1495 error=0 04:42:41 Received message from Master: op=Filter serial=1496 04:42:41 Color wheel filter change from 0 to 0 04:42:41 FLIGetFilterPos err=0 currentPosition=0 04:42:41 FLIGetStepsRemaining err=0 RemainingSteps=0 04:42:41 Filter is already there-color wheel unchanged 04:42:41 Received message from Master: op=Shutter serial=1497 04:42:41 Shutter LASER close 04:42:41 Received message from Camera: op=State serial=1499 04:42:41 GetSingleValue result=40 Value=cccccccc 04:42:41 SkyScan query 04:42:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:42 Parameters OK 04:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:42 Set A/D data flow result=40 04:42:42 Set A/D channel type result=40 04:42:42 Set A/D encoding result=40 04:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:42 Set channel filter=0.000000e+000 result=40 04:42:42 Config A/D Result=40 04:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:42 Get A/D filter: -9.255963e+061 result=40 04:42:42 Get A/D value=-858993460 result=40 04:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:42:42 Parameters OK 04:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:42:42 Set A/D data flow result=40 04:42:42 Set A/D channel type result=40 04:42:42 Set A/D encoding result=40 04:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:42:42 Set channel filter=0.000000e+000 result=40 04:42:42 Config A/D Result=40 04:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:42:42 Get A/D filter: -9.255963e+061 result=40 04:42:42 Get A/D value=-858993460 result=40 04:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:42:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:42:42 Aux= 04:42:42 Message to Camera, serial 1499 queued 04:43:13 Received message from Master: op=PointingHead serial=1506 04:43:13 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:43:13 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:43:13 Point started: ret=0 04:43:13 point_skyscan result=0 04:43:14 Check angles 04:43:14 SkyScan query 04:43:14 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.63<-13442 Statuses=0009 0009 04:43:14 Msec=0 True Az=152.94 Ze=-21.63 Az status=0009 Ze status=0009 04:43:15 Check angles 04:43:15 SkyScan query 04:43:15 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.69<-12046 Statuses=0009 0009 04:43:15 Msec=750 True Az=135.42 Ze=-0.69 Az status=0009 Ze status=0009 04:43:15 Check angles 04:43:15 SkyScan query 04:43:16 SkyScan query done: ret=0 az=117.57<-7838 ze=20.715<-10619 Statuses=0009 0009 04:43:16 Msec=1500 True Az=117.57 Ze=20.715 Az status=0009 Ze status=0009 04:43:16 Check angles 04:43:16 SkyScan query 04:43:17 SkyScan query done: ret=0 az=99.735<-6649 ze=42.12<-9192 Statuses=0009 0009 04:43:17 Msec=2250 True Az=99.735 Ze=42.12 Az status=0009 Ze status=0009 04:43:17 Check angles 04:43:17 SkyScan query 04:43:18 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 04:43:18 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 04:43:18 Check angles 04:43:18 SkyScan query 04:43:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:43:18 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:43:18 Message to Master queued w/err=0: serial=1506 error=0 04:43:23 Received message from Master: op=Filter serial=1507 04:43:23 Color wheel filter change from 0 to 0 04:43:23 FLIGetFilterPos err=0 currentPosition=0 04:43:23 FLIGetStepsRemaining err=0 RemainingSteps=0 04:43:23 Filter is already there-color wheel unchanged 04:43:23 Received message from Master: op=Shutter serial=1508 04:43:23 Shutter LASER close 04:43:23 Received message from Camera: op=State serial=1510 04:43:23 GetSingleValue result=40 Value=cccccccc 04:43:23 SkyScan query 04:43:24 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:43:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:24 Parameters OK 04:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:24 Set A/D data flow result=40 04:43:24 Set A/D channel type result=40 04:43:24 Set A/D encoding result=40 04:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:24 Set channel filter=0.000000e+000 result=40 04:43:24 Config A/D Result=40 04:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:24 Get A/D filter: -9.255963e+061 result=40 04:43:24 Get A/D value=-858993460 result=40 04:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:43:24 Parameters OK 04:43:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:43:24 Set A/D data flow result=40 04:43:24 Set A/D channel type result=40 04:43:24 Set A/D encoding result=40 04:43:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:43:24 Set channel filter=0.000000e+000 result=40 04:43:24 Config A/D Result=40 04:43:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:43:24 Get A/D filter: -9.255963e+061 result=40 04:43:24 Get A/D value=-858993460 result=40 04:43:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:43:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:43:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:43:24 Aux= 04:43:24 Message to Camera, serial 1510 queued 04:43:55 Received message from Master: op=PointingHead serial=1517 04:43:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:43:55 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:43:55 Point started: ret=0 04:43:55 point_skyscan result=0 04:43:56 Check angles 04:43:56 SkyScan query 04:43:57 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 04:43:57 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 04:43:57 Check angles 04:43:57 SkyScan query 04:43:57 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 04:43:57 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 04:43:58 Check angles 04:43:58 SkyScan query 04:43:58 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 04:43:58 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 04:43:58 Check angles 04:43:58 SkyScan query 04:43:59 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 04:43:59 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 04:43:59 Check angles 04:43:59 SkyScan query 04:44:00 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:44:00 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:44:00 Check angles 04:44:00 SkyScan query 04:44:00 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:44:00 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:44:00 Message to Master queued w/err=0: serial=1517 error=0 04:44:05 Received message from Master: op=Filter serial=1518 04:44:05 Color wheel filter change from 0 to 0 04:44:05 FLIGetFilterPos err=0 currentPosition=0 04:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:05 Filter is already there-color wheel unchanged 04:44:06 Received message from Master: op=Shutter serial=1519 04:44:06 Shutter LASER close 04:44:06 Received message from Camera: op=State serial=1521 04:44:06 GetSingleValue result=40 Value=cccccccc 04:44:06 SkyScan query 04:44:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:06 Parameters OK 04:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:06 Set A/D data flow result=40 04:44:06 Set A/D channel type result=40 04:44:06 Set A/D encoding result=40 04:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:06 Set channel filter=0.000000e+000 result=40 04:44:06 Config A/D Result=40 04:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:06 Get A/D filter: -9.255963e+061 result=40 04:44:06 Get A/D value=-858993460 result=40 04:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:06 Parameters OK 04:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:06 Set A/D data flow result=40 04:44:06 Set A/D channel type result=40 04:44:06 Set A/D encoding result=40 04:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:06 Set channel filter=0.000000e+000 result=40 04:44:06 Config A/D Result=40 04:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:06 Get A/D filter: -9.255963e+061 result=40 04:44:06 Get A/D value=-858993460 result=40 04:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:06 Aux= 04:44:06 Message to Camera, serial 1521 queued 04:44:37 Received message from Master: op=PointingHead serial=1528 04:44:37 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:44:37 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:44:37 Point started: ret=0 04:44:37 point_skyscan result=0 04:44:38 Check angles 04:44:38 SkyScan query 04:44:39 SkyScan query done: ret=0 az=152.67<-10178 ze=8.25<-11450 Statuses=0009 0009 04:44:39 Msec=0 True Az=152.67 Ze=8.25 Az status=0009 Ze status=0009 04:44:39 Check angles 04:44:39 SkyScan query 04:44:39 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.705<-12847 Statuses=0009 0009 04:44:39 Msec=750 True Az=135.18 Ze=-12.705 Az status=0009 Ze status=0009 04:44:40 Check angles 04:44:40 SkyScan query 04:44:40 SkyScan query done: ret=0 az=117.18<-7812 ze=-34.08<-14272 Statuses=0009 0009 04:44:40 Msec=1500 True Az=117.18 Ze=-34.08 Az status=0009 Ze status=0009 04:44:40 Check angles 04:44:40 SkyScan query 04:44:41 SkyScan query done: ret=0 az=99.495<-6633 ze=-51.54<-15436 Statuses=0009 0009 04:44:41 Msec=2250 True Az=99.495 Ze=-51.54 Az status=0009 Ze status=0009 04:44:41 Check angles 04:44:41 SkyScan query 04:44:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 04:44:42 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 04:44:42 Check angles 04:44:42 SkyScan query 04:44:43 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:44:43 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:44:43 Message to Master queued w/err=0: serial=1528 error=0 04:44:48 Received message from Master: op=Filter serial=1529 04:44:48 Color wheel filter change from 0 to 0 04:44:48 FLIGetFilterPos err=0 currentPosition=0 04:44:48 FLIGetStepsRemaining err=0 RemainingSteps=0 04:44:48 Filter is already there-color wheel unchanged 04:44:48 Received message from Master: op=Shutter serial=1530 04:44:48 Shutter LASER close 04:44:48 Received message from Camera: op=State serial=1532 04:44:48 GetSingleValue result=40 Value=cccccccc 04:44:48 SkyScan query 04:44:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:44:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:48 Parameters OK 04:44:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:48 Set A/D data flow result=40 04:44:48 Set A/D channel type result=40 04:44:48 Set A/D encoding result=40 04:44:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:48 Set channel filter=0.000000e+000 result=40 04:44:48 Config A/D Result=40 04:44:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:48 Get A/D filter: -9.255963e+061 result=40 04:44:48 Get A/D value=-858993460 result=40 04:44:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:44:48 Parameters OK 04:44:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:44:48 Set A/D data flow result=40 04:44:48 Set A/D channel type result=40 04:44:48 Set A/D encoding result=40 04:44:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:44:48 Set channel filter=0.000000e+000 result=40 04:44:48 Config A/D Result=40 04:44:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:44:48 Get A/D filter: -9.255963e+061 result=40 04:44:48 Get A/D value=-858993460 result=40 04:44:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:44:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:44:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:44:48 Aux= 04:44:48 Message to Camera, serial 1532 queued 04:45:19 Received message from Master: op=PointingHead serial=1539 04:45:19 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:45:19 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:45:20 Point started: ret=0 04:45:20 point_skyscan result=0 04:45:20 Check angles 04:45:20 SkyScan query 04:45:21 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.69<-17446 Statuses=0009 0009 04:45:21 Msec=0 True Az=109.365 Ze=-81.69 Az status=0009 Ze status=0009 04:45:21 Check angles 04:45:21 SkyScan query 04:45:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.63<-18842 Statuses=0008 0009 04:45:22 Msec=750 True Az=113.01 Ze=-102.63 Az status=0008 Ze status=0009 04:45:22 Check angles 04:45:22 SkyScan query 04:45:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.57<-20238 Statuses=0008 0009 04:45:22 Msec=1500 True Az=113.01 Ze=-123.57 Az status=0008 Ze status=0009 04:45:23 Check angles 04:45:23 SkyScan query 04:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 04:45:23 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 04:45:23 Check angles 04:45:23 SkyScan query 04:45:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 04:45:24 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 04:45:24 Check angles 04:45:24 SkyScan query 04:45:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:45:25 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:45:25 Message to Master queued w/err=0: serial=1539 error=0 04:45:30 Received message from Master: op=Filter serial=1540 04:45:30 Color wheel filter change from 0 to 0 04:45:30 FLIGetFilterPos err=0 currentPosition=0 04:45:30 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:30 Filter is already there-color wheel unchanged 04:45:30 Received message from Master: op=Shutter serial=1541 04:45:30 Shutter LASER open 04:45:30 Received message from Camera: op=State serial=1543 04:45:30 GetSingleValue result=40 Value=cccccccc 04:45:30 SkyScan query 04:45:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:45:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:31 Parameters OK 04:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:31 Set A/D data flow result=40 04:45:31 Set A/D channel type result=40 04:45:31 Set A/D encoding result=40 04:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:31 Set channel filter=0.000000e+000 result=40 04:45:31 Config A/D Result=40 04:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:31 Get A/D filter: -9.255963e+061 result=40 04:45:31 Get A/D value=-858993460 result=40 04:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:31 Parameters OK 04:45:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:31 Set A/D data flow result=40 04:45:31 Set A/D channel type result=40 04:45:31 Set A/D encoding result=40 04:45:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:31 Set channel filter=0.000000e+000 result=40 04:45:31 Config A/D Result=40 04:45:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:31 Get A/D filter: -9.255963e+061 result=40 04:45:31 Get A/D value=-858993460 result=40 04:45:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:31 Aux= 04:45:31 Message to Camera, serial 1543 queued 04:45:33 Received message from Master: op=Shutter serial=1547 04:45:33 Shutter LASER close 04:45:33 Received message from Master: op=PointingHead serial=1551 04:45:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:45:33 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:45:34 Point started: ret=0 04:45:34 point_skyscan result=0 04:45:35 Check angles 04:45:35 SkyScan query 04:45:35 SkyScan query done: ret=0 az=89.805<-5987 ze=156.96<-1536 Statuses=0009 0009 04:45:35 Msec=0 True Az=89.805 Ze=156.96 Az status=0009 Ze status=0009 04:45:35 Check angles 04:45:35 SkyScan query 04:45:36 SkyScan query done: ret=0 az=72.315<-4821 ze=136.05<-2930 Statuses=0009 0009 04:45:36 Msec=750 True Az=72.315 Ze=136.05 Az status=0009 Ze status=0009 04:45:36 Check angles 04:45:36 SkyScan query 04:45:37 SkyScan query done: ret=0 az=54.825<-3655 ze=115.11<-4326 Statuses=0009 0009 04:45:37 Msec=1500 True Az=54.825 Ze=115.11 Az status=0009 Ze status=0009 04:45:37 Check angles 04:45:37 SkyScan query 04:45:37 SkyScan query done: ret=0 az=40.965<-2731 ze=94.155<-5723 Statuses=0009 0009 04:45:37 Msec=2250 True Az=40.965 Ze=94.155 Az status=0009 Ze status=0009 04:45:38 Check angles 04:45:38 SkyScan query 04:45:38 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 04:45:38 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 04:45:38 Check angles 04:45:38 SkyScan query 04:45:39 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 04:45:39 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 04:45:39 Check angles 04:45:39 SkyScan query 04:45:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:45:40 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:45:40 Message to Master queued w/err=0: serial=1551 error=0 04:45:45 Received message from Master: op=Filter serial=1552 04:45:45 Color wheel filter change from 0 to 0 04:45:45 FLIGetFilterPos err=0 currentPosition=0 04:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 04:45:45 Filter is already there-color wheel unchanged 04:45:45 Received message from Master: op=Shutter serial=1553 04:45:45 Shutter LASER close 04:45:45 Received message from Camera: op=State serial=1555 04:45:45 GetSingleValue result=40 Value=cccccccc 04:45:45 SkyScan query 04:45:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:46 Parameters OK 04:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:46 Set A/D data flow result=40 04:45:46 Set A/D channel type result=40 04:45:46 Set A/D encoding result=40 04:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:46 Set channel filter=0.000000e+000 result=40 04:45:46 Config A/D Result=40 04:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:46 Get A/D filter: -9.255963e+061 result=40 04:45:46 Get A/D value=-858993460 result=40 04:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:45:46 Parameters OK 04:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:45:46 Set A/D data flow result=40 04:45:46 Set A/D channel type result=40 04:45:46 Set A/D encoding result=40 04:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:45:46 Set channel filter=0.000000e+000 result=40 04:45:46 Config A/D Result=40 04:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:45:46 Get A/D filter: -9.255963e+061 result=40 04:45:46 Get A/D value=-858993460 result=40 04:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:45:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:45:46 Aux= 04:45:46 Message to Camera, serial 1555 queued 04:46:16 Received message from Master: op=PointingHead serial=1562 04:46:16 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:46:16 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:46:17 Point started: ret=0 04:46:17 point_skyscan result=0 04:46:18 Check angles 04:46:18 SkyScan query 04:46:18 SkyScan query done: ret=0 az=64.455<-4297 ze=66.555<-7563 Statuses=0009 0008 04:46:18 Msec=0 True Az=64.455 Ze=66.555 Az status=0009 Ze status=0008 04:46:18 Check angles 04:46:18 SkyScan query 04:46:19 SkyScan query done: ret=0 az=81.825<-5455 ze=66.495<-7567 Statuses=0009 0008 04:46:19 Msec=750 True Az=81.825 Ze=66.495 Az status=0009 Ze status=0008 04:46:19 Check angles 04:46:19 SkyScan query 04:46:20 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 04:46:20 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 04:46:20 Check angles 04:46:20 SkyScan query 04:46:20 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 04:46:20 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 04:46:21 Check angles 04:46:21 SkyScan query 04:46:21 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 04:46:21 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 04:46:21 Check angles 04:46:21 SkyScan query 04:46:22 SkyScan query done: ret=0 az=152.475<-10165 ze=66.495<-7567 Statuses=0009 0008 04:46:22 Msec=3750 True Az=152.475 Ze=66.495 Az status=0009 Ze status=0008 04:46:22 Check angles 04:46:22 SkyScan query 04:46:23 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:46:23 Msec=4500 True Az=157.995 Ze=66.495 Az status=0008 Ze status=0008 04:46:23 Message to Master queued w/err=0: serial=1562 error=0 04:46:28 Received message from Master: op=Filter serial=1563 04:46:28 Color wheel filter change from 0 to 0 04:46:28 FLIGetFilterPos err=0 currentPosition=0 04:46:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:46:28 Filter is already there-color wheel unchanged 04:46:28 Received message from Master: op=Shutter serial=1564 04:46:28 Shutter LASER close 04:46:28 Received message from Camera: op=State serial=1566 04:46:28 GetSingleValue result=40 Value=cccccccc 04:46:28 SkyScan query 04:46:28 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:46:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:28 Parameters OK 04:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:28 Set A/D data flow result=40 04:46:28 Set A/D channel type result=40 04:46:28 Set A/D encoding result=40 04:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:28 Set channel filter=0.000000e+000 result=40 04:46:28 Config A/D Result=40 04:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:28 Get A/D filter: -9.255963e+061 result=40 04:46:28 Get A/D value=-858993460 result=40 04:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:46:28 Parameters OK 04:46:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:46:28 Set A/D data flow result=40 04:46:28 Set A/D channel type result=40 04:46:28 Set A/D encoding result=40 04:46:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:46:28 Set channel filter=0.000000e+000 result=40 04:46:28 Config A/D Result=40 04:46:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:46:28 Get A/D filter: -9.255963e+061 result=40 04:46:28 Get A/D value=-858993460 result=40 04:46:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:46:28 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:46:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:46:28 Aux= 04:46:28 Message to Camera, serial 1566 queued 04:46:59 Received message from Master: op=PointingHead serial=1573 04:46:59 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:46:59 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:47:00 Point started: ret=0 04:47:00 point_skyscan result=0 04:47:00 Check angles 04:47:00 SkyScan query 04:47:01 SkyScan query done: ret=0 az=134.85<-8990 ze=36.675<-9555 Statuses=0009 0009 04:47:01 Msec=0 True Az=134.85 Ze=36.675 Az status=0009 Ze status=0009 04:47:01 Check angles 04:47:01 SkyScan query 04:47:02 SkyScan query done: ret=0 az=117.45<-7830 ze=15.705<-10953 Statuses=0009 0009 04:47:02 Msec=750 True Az=117.45 Ze=15.705 Az status=0009 Ze status=0009 04:47:02 Check angles 04:47:02 SkyScan query 04:47:02 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.685<-12379 Statuses=0009 0009 04:47:02 Msec=1500 True Az=99.66 Ze=-5.685 Az status=0009 Ze status=0009 04:47:03 Check angles 04:47:03 SkyScan query 04:47:03 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.655<-13777 Statuses=0009 0009 04:47:03 Msec=2250 True Az=82.23 Ze=-26.655 Az status=0009 Ze status=0009 04:47:03 Check angles 04:47:03 SkyScan query 04:47:04 SkyScan query done: ret=0 az=64.305<-4287 ze=-38.565<-14571 Statuses=0009 0008 04:47:04 Msec=3000 True Az=64.305 Ze=-38.565 Az status=0009 Ze status=0008 04:47:04 Check angles 04:47:04 SkyScan query 04:47:05 SkyScan query done: ret=0 az=46.845<-3123 ze=-38.535<-14569 Statuses=0009 0008 04:47:05 Msec=3750 True Az=46.845 Ze=-38.535 Az status=0009 Ze status=0008 04:47:05 Check angles 04:47:05 SkyScan query 04:47:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:47:05 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:47:05 Message to Master queued w/err=0: serial=1573 error=0 04:47:10 Received message from Master: op=Filter serial=1574 04:47:10 Color wheel filter change from 0 to 0 04:47:10 FLIGetFilterPos err=0 currentPosition=0 04:47:10 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:10 Filter is already there-color wheel unchanged 04:47:11 Received message from Master: op=Shutter serial=1575 04:47:11 Shutter LASER close 04:47:11 Received message from Camera: op=State serial=1577 04:47:11 GetSingleValue result=40 Value=cccccccc 04:47:11 SkyScan query 04:47:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:47:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:11 Parameters OK 04:47:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:11 Set A/D data flow result=40 04:47:11 Set A/D channel type result=40 04:47:11 Set A/D encoding result=40 04:47:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:11 Set channel filter=0.000000e+000 result=40 04:47:11 Config A/D Result=40 04:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:11 Get A/D filter: -9.255963e+061 result=40 04:47:11 Get A/D value=-858993460 result=40 04:47:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:11 Parameters OK 04:47:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:11 Set A/D data flow result=40 04:47:11 Set A/D channel type result=40 04:47:11 Set A/D encoding result=40 04:47:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:11 Set channel filter=0.000000e+000 result=40 04:47:11 Config A/D Result=40 04:47:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:11 Get A/D filter: -9.255963e+061 result=40 04:47:11 Get A/D value=-858993460 result=40 04:47:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:11 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:11 Aux= 04:47:11 Message to Camera, serial 1577 queued 04:47:42 Received message from Master: op=PointingHead serial=1584 04:47:42 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:47:42 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:47:42 Point started: ret=0 04:47:42 point_skyscan result=0 04:47:43 Check angles 04:47:43 SkyScan query 04:47:44 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.385<-16559 Statuses=0009 0009 04:47:44 Msec=0 True Az=63.99 Ze=-68.385 Az status=0009 Ze status=0009 04:47:44 Check angles 04:47:44 SkyScan query 04:47:45 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.355<-17957 Statuses=0009 0009 04:47:45 Msec=750 True Az=81.585 Ze=-89.355 Az status=0009 Ze status=0009 04:47:45 Check angles 04:47:45 SkyScan query 04:47:45 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.295<-19353 Statuses=0009 0009 04:47:45 Msec=1500 True Az=99.135 Ze=-110.295 Az status=0009 Ze status=0009 04:47:45 Check angles 04:47:45 SkyScan query 04:47:46 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.25<-20750 Statuses=0009 0009 04:47:46 Msec=2250 True Az=116.505 Ze=-131.25 Az status=0009 Ze status=0009 04:47:46 Check angles 04:47:46 SkyScan query 04:47:47 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 04:47:47 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 04:47:47 Check angles 04:47:47 SkyScan query 04:47:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:47:48 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:47:48 Message to Master queued w/err=0: serial=1584 error=0 04:47:53 Received message from Master: op=Filter serial=1585 04:47:53 Color wheel filter change from 0 to 0 04:47:53 FLIGetFilterPos err=0 currentPosition=0 04:47:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:47:53 Filter is already there-color wheel unchanged 04:47:53 Received message from Master: op=Shutter serial=1586 04:47:53 Shutter LASER close 04:47:53 Received message from Camera: op=State serial=1588 04:47:53 GetSingleValue result=40 Value=cccccccc 04:47:53 SkyScan query 04:47:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:47:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:53 Parameters OK 04:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:53 Set A/D data flow result=40 04:47:53 Set A/D channel type result=40 04:47:53 Set A/D encoding result=40 04:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:53 Set channel filter=0.000000e+000 result=40 04:47:53 Config A/D Result=40 04:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:53 Get A/D filter: -9.255963e+061 result=40 04:47:53 Get A/D value=-858993460 result=40 04:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:47:53 Parameters OK 04:47:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:47:53 Set A/D data flow result=40 04:47:53 Set A/D channel type result=40 04:47:53 Set A/D encoding result=40 04:47:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:47:53 Set channel filter=0.000000e+000 result=40 04:47:53 Config A/D Result=40 04:47:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:47:53 Get A/D filter: -9.255963e+061 result=40 04:47:53 Get A/D value=-858993460 result=40 04:47:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:47:53 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:47:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:47:53 Aux= 04:47:53 Message to Camera, serial 1588 queued 04:48:24 Received message from Master: op=PointingHead serial=1595 04:48:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:48:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:48:25 Point started: ret=0 04:48:25 point_skyscan result=0 04:48:25 Check angles 04:48:25 SkyScan query 04:48:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 04:48:26 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 04:48:26 Check angles 04:48:26 SkyScan query 04:48:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:48:27 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:48:27 Message to Master queued w/err=0: serial=1595 error=0 04:48:32 Received message from Master: op=Filter serial=1596 04:48:32 Color wheel filter change from 0 to 0 04:48:32 FLIGetFilterPos err=0 currentPosition=0 04:48:32 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:32 Filter is already there-color wheel unchanged 04:48:32 Received message from Master: op=Shutter serial=1597 04:48:32 Shutter LASER open 04:48:32 Received message from Camera: op=State serial=1599 04:48:32 GetSingleValue result=40 Value=cccccccc 04:48:32 SkyScan query 04:48:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:48:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:33 Parameters OK 04:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:33 Set A/D data flow result=40 04:48:33 Set A/D channel type result=40 04:48:33 Set A/D encoding result=40 04:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:33 Set channel filter=0.000000e+000 result=40 04:48:33 Config A/D Result=40 04:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:33 Get A/D filter: -9.255963e+061 result=40 04:48:33 Get A/D value=-858993460 result=40 04:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:33 Parameters OK 04:48:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:33 Set A/D data flow result=40 04:48:33 Set A/D channel type result=40 04:48:33 Set A/D encoding result=40 04:48:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:33 Set channel filter=0.000000e+000 result=40 04:48:33 Config A/D Result=40 04:48:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:33 Get A/D filter: -9.255963e+061 result=40 04:48:33 Get A/D value=-858993460 result=40 04:48:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:33 Aux= 04:48:33 Message to Camera, serial 1599 queued 04:48:35 Received message from Master: op=Shutter serial=1603 04:48:35 Shutter LASER close 04:48:36 Received message from Master: op=PointingHead serial=1607 04:48:36 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:48:36 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:48:36 Point started: ret=0 04:48:36 point_skyscan result=0 04:48:37 Check angles 04:48:37 SkyScan query 04:48:37 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.175<-21545 Statuses=0009 0009 04:48:37 Msec=0 True Az=135.99 Ze=-143.175 Az status=0009 Ze status=0009 04:48:37 Check angles 04:48:37 SkyScan query 04:48:38 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 04:48:38 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 04:48:38 Check angles 04:48:38 SkyScan query 04:48:39 SkyScan query done: ret=0 az=171.3<-11420 ze=-100.83<-18722 Statuses=0009 0009 04:48:39 Msec=1500 True Az=171.3 Ze=-100.83 Az status=0009 Ze status=0009 04:48:39 Check angles 04:48:39 SkyScan query 04:48:40 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.89<-17326 Statuses=0008 0009 04:48:40 Msec=2250 True Az=176.025 Ze=-79.89 Az status=0008 Ze status=0009 04:48:40 Check angles 04:48:40 SkyScan query 04:48:40 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.905<-15927 Statuses=0008 0009 04:48:40 Msec=3000 True Az=176.01 Ze=-58.905 Az status=0008 Ze status=0009 04:48:40 Check angles 04:48:40 SkyScan query 04:48:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:48:41 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:48:41 Message to Master queued w/err=0: serial=1607 error=0 04:48:46 Received message from Master: op=Filter serial=1608 04:48:46 Color wheel filter change from 0 to 0 04:48:46 FLIGetFilterPos err=0 currentPosition=0 04:48:46 FLIGetStepsRemaining err=0 RemainingSteps=0 04:48:46 Filter is already there-color wheel unchanged 04:48:46 Received message from Master: op=Shutter serial=1609 04:48:46 Shutter LASER close 04:48:46 Received message from Camera: op=State serial=1611 04:48:46 GetSingleValue result=40 Value=cccccccc 04:48:46 SkyScan query 04:48:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:48:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:47 Parameters OK 04:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:47 Set A/D data flow result=40 04:48:47 Set A/D channel type result=40 04:48:47 Set A/D encoding result=40 04:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:47 Set channel filter=0.000000e+000 result=40 04:48:47 Config A/D Result=40 04:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:47 Get A/D filter: -9.255963e+061 result=40 04:48:47 Get A/D value=-858993460 result=40 04:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:48:47 Parameters OK 04:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:48:47 Set A/D data flow result=40 04:48:47 Set A/D channel type result=40 04:48:47 Set A/D encoding result=40 04:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:48:47 Set channel filter=0.000000e+000 result=40 04:48:47 Config A/D Result=40 04:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:48:47 Get A/D filter: -9.255963e+061 result=40 04:48:47 Get A/D value=-858993460 result=40 04:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:48:47 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:48:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:48:47 Aux= 04:48:47 Message to Camera, serial 1611 queued 04:49:18 Received message from Master: op=PointingHead serial=1618 04:49:18 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:49:18 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:49:18 Point started: ret=0 04:49:18 point_skyscan result=0 04:49:19 Check angles 04:49:19 SkyScan query 04:49:19 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.84<-13456 Statuses=0009 0009 04:49:19 Msec=0 True Az=153.12 Ze=-21.84 Az status=0009 Ze status=0009 04:49:20 Check angles [UTC 2018-12-4 04:49:20] 04:49:20 SkyScan query 04:49:20 SkyScan query done: ret=0 az=134.145<-8943 ze=0.84<-11944 Statuses=0009 0009 04:49:20 Msec=750 True Az=134.145 Ze=0.84 Az status=0009 Ze status=0009 04:49:20 Check angles 04:49:20 SkyScan query 04:49:21 SkyScan query done: ret=0 az=117.735<-7849 ze=20.52<-10632 Statuses=0009 0009 04:49:21 Msec=1500 True Az=117.735 Ze=20.52 Az status=0009 Ze status=0009 04:49:21 Check angles 04:49:21 SkyScan query 04:49:22 SkyScan query done: ret=0 az=99.975<-6665 ze=41.91<-9206 Statuses=0009 0009 04:49:22 Msec=2250 True Az=99.975 Ze=41.91 Az status=0009 Ze status=0009 04:49:22 Check angles 04:49:22 SkyScan query 04:49:23 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 04:49:23 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 04:49:23 Check angles 04:49:23 SkyScan query 04:49:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:49:23 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 04:49:23 Message to Master queued w/err=0: serial=1618 error=0 04:49:28 Received message from Master: op=Filter serial=1619 04:49:28 Color wheel filter change from 0 to 0 04:49:28 FLIGetFilterPos err=0 currentPosition=0 04:49:28 FLIGetStepsRemaining err=0 RemainingSteps=0 04:49:28 Filter is already there-color wheel unchanged 04:49:28 Received message from Master: op=Shutter serial=1620 04:49:28 Shutter LASER close 04:49:29 Received message from Camera: op=State serial=1622 04:49:29 GetSingleValue result=40 Value=cccccccc 04:49:29 SkyScan query 04:49:29 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:49:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:29 Parameters OK 04:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:29 Set A/D data flow result=40 04:49:29 Set A/D channel type result=40 04:49:29 Set A/D encoding result=40 04:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:29 Set channel filter=0.000000e+000 result=40 04:49:29 Config A/D Result=40 04:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:29 Get A/D filter: -9.255963e+061 result=40 04:49:29 Get A/D value=-858993460 result=40 04:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:49:29 Parameters OK 04:49:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:49:29 Set A/D data flow result=40 04:49:29 Set A/D channel type result=40 04:49:29 Set A/D encoding result=40 04:49:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:49:29 Set channel filter=0.000000e+000 result=40 04:49:29 Config A/D Result=40 04:49:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:49:29 Get A/D filter: -9.255963e+061 result=40 04:49:29 Get A/D value=-858993460 result=40 04:49:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:49:29 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:49:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:49:29 Aux= 04:49:29 Message to Camera, serial 1622 queued 04:50:00 Received message from Master: op=PointingHead serial=1629 04:50:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:50:00 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:50:00 Point started: ret=0 04:50:00 point_skyscan result=0 04:50:01 Check angles 04:50:01 SkyScan query 04:50:02 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 04:50:02 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 04:50:02 Check angles 04:50:02 SkyScan query 04:50:02 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 04:50:02 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 04:50:03 Check angles 04:50:03 SkyScan query 04:50:03 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 04:50:03 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 04:50:03 Check angles 04:50:03 SkyScan query 04:50:04 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 04:50:04 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 04:50:04 Check angles 04:50:04 SkyScan query 04:50:05 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:50:05 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:50:05 Check angles 04:50:05 SkyScan query 04:50:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:50:06 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 04:50:06 Message to Master queued w/err=0: serial=1629 error=0 04:50:11 Received message from Master: op=Filter serial=1630 04:50:11 Color wheel filter change from 0 to 0 04:50:11 FLIGetFilterPos err=0 currentPosition=0 04:50:11 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:11 Filter is already there-color wheel unchanged 04:50:11 Received message from Master: op=Shutter serial=1631 04:50:11 Shutter LASER close 04:50:11 Received message from Camera: op=State serial=1633 04:50:11 GetSingleValue result=40 Value=cccccccc 04:50:11 SkyScan query 04:50:11 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:11 Parameters OK 04:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:11 Set A/D data flow result=40 04:50:11 Set A/D channel type result=40 04:50:11 Set A/D encoding result=40 04:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:11 Set channel filter=0.000000e+000 result=40 04:50:11 Config A/D Result=40 04:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:11 Get A/D filter: -9.255963e+061 result=40 04:50:11 Get A/D value=-858993460 result=40 04:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:11 Parameters OK 04:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:11 Set A/D data flow result=40 04:50:11 Set A/D channel type result=40 04:50:11 Set A/D encoding result=40 04:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:11 Set channel filter=0.000000e+000 result=40 04:50:11 Config A/D Result=40 04:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:11 Get A/D filter: -9.255963e+061 result=40 04:50:11 Get A/D value=-858993460 result=40 04:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:11 Aux= 04:50:11 Message to Camera, serial 1633 queued 04:50:42 Received message from Master: op=PointingHead serial=1640 04:50:42 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:50:42 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:50:43 Point started: ret=0 04:50:43 point_skyscan result=0 04:50:43 Check angles 04:50:43 SkyScan query 04:50:44 SkyScan query done: ret=0 az=153.24<-10216 ze=8.925<-11405 Statuses=0009 0009 04:50:44 Msec=0 True Az=153.24 Ze=8.925 Az status=0009 Ze status=0009 04:50:44 Check angles 04:50:44 SkyScan query 04:50:45 SkyScan query done: ret=0 az=135.72<-9048 ze=-12.015<-12801 Statuses=0009 0009 04:50:45 Msec=750 True Az=135.72 Ze=-12.015 Az status=0009 Ze status=0009 04:50:45 Check angles 04:50:45 SkyScan query 04:50:45 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.97<-14198 Statuses=0009 0009 04:50:45 Msec=1500 True Az=118.26 Ze=-32.97 Az status=0009 Ze status=0009 04:50:46 Check angles 04:50:46 SkyScan query 04:50:46 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 04:50:46 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 04:50:46 Check angles 04:50:46 SkyScan query 04:50:47 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 04:50:47 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 04:50:47 Check angles 04:50:47 SkyScan query 04:50:48 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 04:50:48 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 04:50:48 Message to Master queued w/err=0: serial=1640 error=0 04:50:53 Received message from Master: op=Filter serial=1641 04:50:53 Color wheel filter change from 0 to 0 04:50:53 FLIGetFilterPos err=0 currentPosition=0 04:50:53 FLIGetStepsRemaining err=0 RemainingSteps=0 04:50:53 Filter is already there-color wheel unchanged 04:50:53 Received message from Master: op=Shutter serial=1642 04:50:53 Shutter LASER close 04:50:53 Received message from Camera: op=State serial=1644 04:50:53 GetSingleValue result=40 Value=cccccccc 04:50:53 SkyScan query 04:50:53 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:50:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:53 Parameters OK 04:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:53 Set A/D data flow result=40 04:50:53 Set A/D channel type result=40 04:50:53 Set A/D encoding result=40 04:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:53 Set channel filter=0.000000e+000 result=40 04:50:53 Config A/D Result=40 04:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:53 Get A/D filter: -9.255963e+061 result=40 04:50:53 Get A/D value=-858993460 result=40 04:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:50:53 Parameters OK 04:50:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:50:53 Set A/D data flow result=40 04:50:53 Set A/D channel type result=40 04:50:53 Set A/D encoding result=40 04:50:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:50:53 Set channel filter=0.000000e+000 result=40 04:50:53 Config A/D Result=40 04:50:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:50:53 Get A/D filter: -9.255963e+061 result=40 04:50:53 Get A/D value=-858993460 result=40 04:50:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:50:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:50:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:50:53 Aux= 04:50:53 Message to Camera, serial 1644 queued 04:51:24 Received message from Master: op=PointingHead serial=1651 04:51:24 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:51:24 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:51:25 Point started: ret=0 04:51:25 point_skyscan result=0 04:51:25 Check angles 04:51:25 SkyScan query 04:51:26 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.03<-17402 Statuses=0009 0009 04:51:26 Msec=0 True Az=108.855 Ze=-81.03 Az status=0009 Ze status=0009 04:51:26 Check angles 04:51:26 SkyScan query 04:51:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.435<-18829 Statuses=0008 0009 04:51:27 Msec=750 True Az=113.01 Ze=-102.435 Az status=0008 Ze status=0009 04:51:27 Check angles 04:51:27 SkyScan query 04:51:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.795<-20253 Statuses=0008 0009 04:51:27 Msec=1500 True Az=113.01 Ze=-123.795 Az status=0008 Ze status=0009 04:51:28 Check angles 04:51:28 SkyScan query 04:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 04:51:28 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 04:51:28 Check angles 04:51:28 SkyScan query 04:51:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 04:51:29 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 04:51:29 Check angles 04:51:29 SkyScan query 04:51:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:51:30 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:51:30 Message to Master queued w/err=0: serial=1651 error=0 04:51:35 Received message from Master: op=Filter serial=1652 04:51:35 Color wheel filter change from 0 to 0 04:51:35 FLIGetFilterPos err=0 currentPosition=0 04:51:35 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:35 Filter is already there-color wheel unchanged 04:51:35 Received message from Master: op=Shutter serial=1653 04:51:35 Shutter LASER open 04:51:35 Received message from Camera: op=State serial=1655 04:51:35 GetSingleValue result=40 Value=cccccccc 04:51:35 SkyScan query 04:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:51:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:36 Parameters OK 04:51:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:36 Set A/D data flow result=40 04:51:36 Set A/D channel type result=40 04:51:36 Set A/D encoding result=40 04:51:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:36 Set channel filter=0.000000e+000 result=40 04:51:36 Config A/D Result=40 04:51:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:36 Get A/D filter: -9.255963e+061 result=40 04:51:36 Get A/D value=-858993460 result=40 04:51:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:36 Parameters OK 04:51:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:36 Set A/D data flow result=40 04:51:36 Set A/D channel type result=40 04:51:36 Set A/D encoding result=40 04:51:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:36 Set channel filter=0.000000e+000 result=40 04:51:36 Config A/D Result=40 04:51:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:36 Get A/D filter: -9.255963e+061 result=40 04:51:36 Get A/D value=-858993460 result=40 04:51:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:36 Aux= 04:51:36 Message to Camera, serial 1655 queued 04:51:38 Received message from Master: op=Shutter serial=1659 04:51:38 Shutter LASER close 04:51:39 Received message from Master: op=PointingHead serial=1663 04:51:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:51:39 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:51:39 Point started: ret=0 04:51:39 point_skyscan result=0 04:51:40 Check angles 04:51:40 SkyScan query 04:51:40 SkyScan query done: ret=0 az=90.18<-6012 ze=157.53<-1498 Statuses=0009 0009 04:51:40 Msec=0 True Az=90.18 Ze=157.53 Az status=0009 Ze status=0009 04:51:40 Check angles 04:51:40 SkyScan query 04:51:41 SkyScan query done: ret=0 az=72.72<-4848 ze=136.59<-2894 Statuses=0009 0009 04:51:41 Msec=750 True Az=72.72 Ze=136.59 Az status=0009 Ze status=0009 04:51:41 Check angles 04:51:41 SkyScan query 04:51:42 SkyScan query done: ret=0 az=55.17<-3678 ze=115.62<-4292 Statuses=0009 0009 04:51:42 Msec=1500 True Az=55.17 Ze=115.62 Az status=0009 Ze status=0009 04:51:42 Check angles 04:51:42 SkyScan query 04:51:42 SkyScan query done: ret=0 az=41.07<-2738 ze=94.68<-5688 Statuses=0009 0009 04:51:42 Msec=2250 True Az=41.07 Ze=94.68 Az status=0009 Ze status=0009 04:51:43 Check angles 04:51:43 SkyScan query 04:51:43 SkyScan query done: ret=0 az=40.995<-2733 ze=73.74<-7084 Statuses=0008 0009 04:51:43 Msec=3000 True Az=40.995 Ze=73.74 Az status=0008 Ze status=0009 04:51:43 Check angles 04:51:43 SkyScan query 04:51:44 SkyScan query done: ret=0 az=40.995<-2733 ze=53.055<-8463 Statuses=0008 0009 04:51:44 Msec=3750 True Az=40.995 Ze=53.055 Az status=0008 Ze status=0009 04:51:44 Check angles 04:51:44 SkyScan query 04:51:45 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:51:45 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:51:45 Message to Master queued w/err=0: serial=1663 error=0 04:51:49 Received message from Master: op=Identify serial=1664 04:51:50 Received message from Master: op=Filter serial=1667 04:51:50 Color wheel filter change from 0 to 0 04:51:50 FLIGetFilterPos err=0 currentPosition=0 04:51:50 FLIGetStepsRemaining err=0 RemainingSteps=0 04:51:50 Filter is already there-color wheel unchanged 04:51:50 Received message from Master: op=Shutter serial=1668 04:51:50 Shutter LASER close 04:51:50 Received message from Camera: op=State serial=1670 04:51:50 GetSingleValue result=40 Value=cccccccc 04:51:50 SkyScan query 04:51:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:51:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:51 Parameters OK 04:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:51 Set A/D data flow result=40 04:51:51 Set A/D channel type result=40 04:51:51 Set A/D encoding result=40 04:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:51 Set channel filter=0.000000e+000 result=40 04:51:51 Config A/D Result=40 04:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:51 Get A/D filter: -9.255963e+061 result=40 04:51:51 Get A/D value=-858993460 result=40 04:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:51:51 Parameters OK 04:51:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:51:51 Set A/D data flow result=40 04:51:51 Set A/D channel type result=40 04:51:51 Set A/D encoding result=40 04:51:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:51:51 Set channel filter=0.000000e+000 result=40 04:51:51 Config A/D Result=40 04:51:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:51:51 Get A/D filter: -9.255963e+061 result=40 04:51:51 Get A/D value=-858993460 result=40 04:51:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:51:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:51:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:51:51 Aux= 04:51:51 Message to Camera, serial 1670 queued [UTC 2018-12-4 04:52:09] 04:52:21 Received message from Master: op=PointingHead serial=1677 04:52:21 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:52:21 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:52:22 Point started: ret=0 04:52:22 point_skyscan result=0 04:52:23 Check angles 04:52:23 SkyScan query 04:52:23 SkyScan query done: ret=0 az=64.08<-4272 ze=66.54<-7564 Statuses=0009 0008 04:52:23 Msec=0 True Az=64.08 Ze=66.54 Az status=0009 Ze status=0008 04:52:23 Check angles 04:52:23 SkyScan query 04:52:24 SkyScan query done: ret=0 az=81.81<-5454 ze=66.495<-7567 Statuses=0009 0008 04:52:24 Msec=750 True Az=81.81 Ze=66.495 Az status=0009 Ze status=0008 04:52:24 Check angles 04:52:24 SkyScan query 04:52:25 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 04:52:25 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 04:52:25 Check angles 04:52:25 SkyScan query 04:52:25 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 04:52:25 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 04:52:26 Check angles 04:52:26 SkyScan query 04:52:26 SkyScan query done: ret=0 az=134.1<-8940 ze=66.495<-7567 Statuses=0009 0008 04:52:26 Msec=3000 True Az=134.1 Ze=66.495 Az status=0009 Ze status=0008 04:52:26 Check angles 04:52:26 SkyScan query 04:52:27 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 04:52:27 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 04:52:27 Check angles 04:52:27 SkyScan query 04:52:28 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:52:28 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:52:28 Message to Master queued w/err=0: serial=1677 error=0 04:52:33 Received message from Master: op=Filter serial=1678 04:52:33 Color wheel filter change from 0 to 0 04:52:33 FLIGetFilterPos err=0 currentPosition=0 04:52:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:52:33 Filter is already there-color wheel unchanged 04:52:33 Received message from Master: op=Shutter serial=1679 04:52:33 Shutter LASER close 04:52:33 Received message from Camera: op=State serial=1681 04:52:33 GetSingleValue result=40 Value=cccccccc 04:52:33 SkyScan query 04:52:33 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:52:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:33 Parameters OK 04:52:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:33 Set A/D data flow result=40 04:52:33 Set A/D channel type result=40 04:52:33 Set A/D encoding result=40 04:52:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:33 Set channel filter=0.000000e+000 result=40 04:52:33 Config A/D Result=40 04:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:33 Get A/D filter: -9.255963e+061 result=40 04:52:33 Get A/D value=-858993460 result=40 04:52:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:52:33 Parameters OK 04:52:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:52:33 Set A/D data flow result=40 04:52:33 Set A/D channel type result=40 04:52:33 Set A/D encoding result=40 04:52:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:52:33 Set channel filter=0.000000e+000 result=40 04:52:33 Config A/D Result=40 04:52:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:52:33 Get A/D filter: -9.255963e+061 result=40 04:52:33 Get A/D value=-858993460 result=40 04:52:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:52:33 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:52:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:52:33 Aux= 04:52:33 Message to Camera, serial 1681 queued 04:53:04 Received message from Master: op=PointingHead serial=1688 04:53:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:53:04 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:53:05 Point started: ret=0 04:53:05 point_skyscan result=0 04:53:05 Check angles 04:53:05 SkyScan query 04:53:06 SkyScan query done: ret=0 az=135.03<-9002 ze=36.72<-9552 Statuses=0009 0009 04:53:06 Msec=0 True Az=135.03 Ze=36.72 Az status=0009 Ze status=0009 04:53:06 Check angles 04:53:06 SkyScan query 04:53:07 SkyScan query done: ret=0 az=117.585<-7839 ze=15.765<-10949 Statuses=0009 0009 04:53:07 Msec=750 True Az=117.585 Ze=15.765 Az status=0009 Ze status=0009 04:53:07 Check angles 04:53:07 SkyScan query 04:53:07 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.205<-12347 Statuses=0009 0009 04:53:07 Msec=1500 True Az=100.14 Ze=-5.205 Az status=0009 Ze status=0009 04:53:08 Check angles 04:53:08 SkyScan query 04:53:08 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.19<-13746 Statuses=0009 0009 04:53:08 Msec=2250 True Az=82.65 Ze=-26.19 Az status=0009 Ze status=0009 04:53:08 Check angles 04:53:08 SkyScan query 04:53:09 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.565<-14571 Statuses=0009 0008 04:53:09 Msec=3000 True Az=65.235 Ze=-38.565 Az status=0009 Ze status=0008 04:53:09 Check angles 04:53:09 SkyScan query 04:53:10 SkyScan query done: ret=0 az=47.775<-3185 ze=-38.535<-14569 Statuses=0009 0008 04:53:10 Msec=3750 True Az=47.775 Ze=-38.535 Az status=0009 Ze status=0008 04:53:10 Check angles 04:53:10 SkyScan query 04:53:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:53:10 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:53:10 Message to Master queued w/err=0: serial=1688 error=0 04:53:15 Received message from Master: op=Filter serial=1689 04:53:15 Color wheel filter change from 0 to 0 04:53:15 FLIGetFilterPos err=0 currentPosition=0 04:53:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:15 Filter is already there-color wheel unchanged 04:53:16 Received message from Master: op=Shutter serial=1690 04:53:16 Shutter LASER close 04:53:16 Received message from Camera: op=State serial=1692 04:53:16 GetSingleValue result=40 Value=cccccccc 04:53:16 SkyScan query 04:53:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:53:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:16 Parameters OK 04:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:16 Set A/D data flow result=40 04:53:16 Set A/D channel type result=40 04:53:16 Set A/D encoding result=40 04:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:16 Set channel filter=0.000000e+000 result=40 04:53:16 Config A/D Result=40 04:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:16 Get A/D filter: -9.255963e+061 result=40 04:53:16 Get A/D value=-858993460 result=40 04:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:16 Parameters OK 04:53:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:16 Set A/D data flow result=40 04:53:16 Set A/D channel type result=40 04:53:16 Set A/D encoding result=40 04:53:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:16 Set channel filter=0.000000e+000 result=40 04:53:16 Config A/D Result=40 04:53:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:16 Get A/D filter: -9.255963e+061 result=40 04:53:16 Get A/D value=-858993460 result=40 04:53:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:16 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:16 Aux= 04:53:16 Message to Camera, serial 1692 queued 04:53:47 Received message from Master: op=PointingHead serial=1699 04:53:47 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:53:47 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:53:47 Point started: ret=0 04:53:47 point_skyscan result=0 04:53:48 Check angles 04:53:48 SkyScan query 04:53:49 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.34<-16556 Statuses=0009 0009 04:53:49 Msec=0 True Az=63.975 Ze=-68.34 Az status=0009 Ze status=0009 04:53:49 Check angles 04:53:49 SkyScan query 04:53:50 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.745<-17983 Statuses=0009 0009 04:53:50 Msec=750 True Az=82.02 Ze=-89.745 Az status=0009 Ze status=0009 04:53:50 Check angles 04:53:50 SkyScan query 04:53:50 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.67<-19378 Statuses=0009 0009 04:53:50 Msec=1500 True Az=99.375 Ze=-110.67 Az status=0009 Ze status=0009 04:53:50 Check angles 04:53:50 SkyScan query 04:53:51 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.625<-20775 Statuses=0009 0009 04:53:51 Msec=2250 True Az=116.91 Ze=-131.625 Az status=0009 Ze status=0009 04:53:51 Check angles 04:53:51 SkyScan query 04:53:52 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 04:53:52 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 04:53:52 Check angles 04:53:52 SkyScan query 04:53:53 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 04:53:53 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 04:53:53 Message to Master queued w/err=0: serial=1699 error=0 04:53:58 Received message from Master: op=Filter serial=1700 04:53:58 Color wheel filter change from 0 to 0 04:53:58 FLIGetFilterPos err=0 currentPosition=0 04:53:58 FLIGetStepsRemaining err=0 RemainingSteps=0 04:53:58 Filter is already there-color wheel unchanged 04:53:58 Received message from Master: op=Shutter serial=1701 04:53:58 Shutter LASER close 04:53:58 Received message from Camera: op=State serial=1703 04:53:58 GetSingleValue result=40 Value=cccccccc 04:53:58 SkyScan query 04:53:58 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 04:53:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:58 Parameters OK 04:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:58 Set A/D data flow result=40 04:53:58 Set A/D channel type result=40 04:53:58 Set A/D encoding result=40 04:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:58 Set channel filter=0.000000e+000 result=40 04:53:58 Config A/D Result=40 04:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:58 Get A/D filter: -9.255963e+061 result=40 04:53:58 Get A/D value=-858993460 result=40 04:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:53:58 Parameters OK 04:53:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:53:58 Set A/D data flow result=40 04:53:58 Set A/D channel type result=40 04:53:58 Set A/D encoding result=40 04:53:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:53:58 Set channel filter=0.000000e+000 result=40 04:53:58 Config A/D Result=40 04:53:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:53:58 Get A/D filter: -9.255963e+061 result=40 04:53:58 Get A/D value=-858993460 result=40 04:53:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:53:58 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:53:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:53:58 Aux= 04:53:58 Message to Camera, serial 1703 queued 04:54:29 Received message from Master: op=PointingHead serial=1710 04:54:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:54:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:54:30 Point started: ret=0 04:54:30 point_skyscan result=0 04:54:30 Check angles 04:54:30 SkyScan query 04:54:31 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.27<-23418 Statuses=0009 0009 04:54:31 Msec=0 True Az=113.01 Ze=-171.27 Az status=0009 Ze status=0009 04:54:31 Check angles 04:54:31 SkyScan query 04:54:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 04:54:32 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 04:54:32 Message to Master queued w/err=0: serial=1710 error=0 04:54:37 Received message from Master: op=Filter serial=1711 04:54:37 Color wheel filter change from 0 to 0 04:54:37 FLIGetFilterPos err=0 currentPosition=0 04:54:37 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:37 Filter is already there-color wheel unchanged 04:54:37 Received message from Master: op=Shutter serial=1712 04:54:37 Shutter LASER open 04:54:37 Received message from Camera: op=State serial=1714 04:54:37 GetSingleValue result=40 Value=cccccccc 04:54:37 SkyScan query 04:54:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:38 Parameters OK 04:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:38 Set A/D data flow result=40 04:54:38 Set A/D channel type result=40 04:54:38 Set A/D encoding result=40 04:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:38 Set channel filter=0.000000e+000 result=40 04:54:38 Config A/D Result=40 04:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:38 Get A/D filter: -9.255963e+061 result=40 04:54:38 Get A/D value=-858993460 result=40 04:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:38 Parameters OK 04:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:38 Set A/D data flow result=40 04:54:38 Set A/D channel type result=40 04:54:38 Set A/D encoding result=40 04:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:38 Set channel filter=0.000000e+000 result=40 04:54:38 Config A/D Result=40 04:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:38 Get A/D filter: -9.255963e+061 result=40 04:54:38 Get A/D value=-858993460 result=40 04:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:38 Aux= 04:54:38 Message to Camera, serial 1714 queued 04:54:40 Received message from Master: op=Shutter serial=1718 04:54:40 Shutter LASER close 04:54:41 Received message from Master: op=PointingHead serial=1722 04:54:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 04:54:41 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 04:54:41 Point started: ret=0 04:54:41 point_skyscan result=0 04:54:42 Check angles 04:54:42 SkyScan query 04:54:42 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.325<-21555 Statuses=0009 0009 04:54:42 Msec=0 True Az=135.855 Ze=-143.325 Az status=0009 Ze status=0009 04:54:42 Check angles 04:54:42 SkyScan query 04:54:43 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.385<-20159 Statuses=0009 0009 04:54:43 Msec=750 True Az=153.375 Ze=-122.385 Az status=0009 Ze status=0009 04:54:43 Check angles 04:54:43 SkyScan query 04:54:44 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.43<-18762 Statuses=0009 0009 04:54:44 Msec=1500 True Az=170.835 Ze=-101.43 Az status=0009 Ze status=0009 04:54:44 Check angles 04:54:44 SkyScan query 04:54:44 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.475<-17365 Statuses=0008 0009 04:54:44 Msec=2250 True Az=176.01 Ze=-80.475 Az status=0008 Ze status=0009 04:54:45 Check angles 04:54:45 SkyScan query 04:54:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.505<-15967 Statuses=0008 0009 04:54:45 Msec=3000 True Az=175.995 Ze=-59.505 Az status=0008 Ze status=0009 04:54:45 Check angles 04:54:45 SkyScan query 04:54:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 04:54:46 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 04:54:46 Message to Master queued w/err=0: serial=1722 error=0 04:54:51 Received message from Master: op=Filter serial=1723 04:54:51 Color wheel filter change from 0 to 0 04:54:51 FLIGetFilterPos err=0 currentPosition=0 04:54:51 FLIGetStepsRemaining err=0 RemainingSteps=0 04:54:51 Filter is already there-color wheel unchanged 04:54:51 Received message from Master: op=Shutter serial=1724 04:54:51 Shutter LASER close 04:54:51 Received message from Camera: op=State serial=1726 04:54:51 GetSingleValue result=40 Value=cccccccc 04:54:51 SkyScan query 04:54:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 04:54:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:52 Parameters OK 04:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:52 Set A/D data flow result=40 04:54:52 Set A/D channel type result=40 04:54:52 Set A/D encoding result=40 04:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:52 Set channel filter=0.000000e+000 result=40 04:54:52 Config A/D Result=40 04:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:52 Get A/D filter: -9.255963e+061 result=40 04:54:52 Get A/D value=-858993460 result=40 04:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:54:52 Parameters OK 04:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:54:52 Set A/D data flow result=40 04:54:52 Set A/D channel type result=40 04:54:52 Set A/D encoding result=40 04:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:54:52 Set channel filter=0.000000e+000 result=40 04:54:52 Config A/D Result=40 04:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:54:52 Get A/D filter: -9.255963e+061 result=40 04:54:52 Get A/D value=-858993460 result=40 04:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:54:52 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:54:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:54:52 Aux= 04:54:52 Message to Camera, serial 1726 queued 04:55:23 Received message from Master: op=PointingHead serial=1733 04:55:23 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 04:55:23 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 04:55:23 Point started: ret=0 04:55:23 point_skyscan result=0 04:55:24 Check angles 04:55:24 SkyScan query 04:55:24 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.93<-13462 Statuses=0009 0009 04:55:24 Msec=0 True Az=153.105 Ze=-21.93 Az status=0009 Ze status=0009 04:55:25 Check angles 04:55:25 SkyScan query 04:55:25 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.555<-12037 Statuses=0009 0009 04:55:25 Msec=750 True Az=135.165 Ze=-0.555 Az status=0009 Ze status=0009 04:55:25 Check angles 04:55:25 SkyScan query 04:55:26 SkyScan query done: ret=0 az=117.36<-7824 ze=20.835<-10611 Statuses=0009 0009 04:55:26 Msec=1500 True Az=117.36 Ze=20.835 Az status=0009 Ze status=0009 04:55:26 Check angles 04:55:26 SkyScan query 04:55:27 SkyScan query done: ret=0 az=99.6<-6640 ze=42.225<-9185 Statuses=0009 0009 04:55:27 Msec=2250 True Az=99.6 Ze=42.225 Az status=0009 Ze status=0009 04:55:27 Check angles 04:55:27 SkyScan query 04:55:28 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 04:55:28 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 04:55:28 Check angles 04:55:28 SkyScan query 04:55:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 04:55:28 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 04:55:28 Message to Master queued w/err=0: serial=1733 error=0 04:55:33 Received message from Master: op=Filter serial=1734 04:55:33 Color wheel filter change from 0 to 0 04:55:33 FLIGetFilterPos err=0 currentPosition=0 04:55:33 FLIGetStepsRemaining err=0 RemainingSteps=0 04:55:33 Filter is already there-color wheel unchanged 04:55:33 Received message from Master: op=Shutter serial=1735 04:55:33 Shutter LASER close 04:55:33 Received message from Camera: op=State serial=1737 04:55:33 GetSingleValue result=40 Value=cccccccc 04:55:33 SkyScan query 04:55:34 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 04:55:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:34 Parameters OK 04:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:34 Set A/D data flow result=40 04:55:34 Set A/D channel type result=40 04:55:34 Set A/D encoding result=40 04:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:34 Set channel filter=0.000000e+000 result=40 04:55:34 Config A/D Result=40 04:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:34 Get A/D filter: -9.255963e+061 result=40 04:55:34 Get A/D value=-858993460 result=40 04:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:55:34 Parameters OK 04:55:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:55:34 Set A/D data flow result=40 04:55:34 Set A/D channel type result=40 04:55:34 Set A/D encoding result=40 04:55:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:55:34 Set channel filter=0.000000e+000 result=40 04:55:34 Config A/D Result=40 04:55:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:55:34 Get A/D filter: -9.255963e+061 result=40 04:55:34 Get A/D value=-858993460 result=40 04:55:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:55:34 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:55:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:55:34 Aux= 04:55:34 Message to Camera, serial 1737 queued 04:56:05 Received message from Master: op=PointingHead serial=1744 04:56:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 04:56:05 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 04:56:05 Point started: ret=0 04:56:05 point_skyscan result=0 04:56:06 Check angles 04:56:06 SkyScan query 04:56:07 SkyScan query done: ret=0 az=109.41<-7294 ze=38.49<-9434 Statuses=0009 0008 04:56:07 Msec=0 True Az=109.41 Ze=38.49 Az status=0009 Ze status=0008 04:56:07 Check angles 04:56:07 SkyScan query 04:56:07 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 04:56:07 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 04:56:08 Check angles 04:56:08 SkyScan query 04:56:08 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 04:56:08 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 04:56:08 Check angles 04:56:08 SkyScan query 04:56:09 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 04:56:09 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 04:56:09 Check angles 04:56:09 SkyScan query 04:56:10 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 04:56:10 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 04:56:10 Check angles 04:56:10 SkyScan query 04:56:10 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 04:56:10 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 04:56:10 Message to Master queued w/err=0: serial=1744 error=0 04:56:15 Received message from Master: op=Filter serial=1745 04:56:15 Color wheel filter change from 0 to 0 04:56:15 FLIGetFilterPos err=0 currentPosition=0 04:56:15 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:15 Filter is already there-color wheel unchanged 04:56:16 Received message from Master: op=Shutter serial=1746 04:56:16 Shutter LASER close 04:56:16 Received message from Camera: op=State serial=1748 04:56:16 GetSingleValue result=40 Value=cccccccc 04:56:16 SkyScan query 04:56:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 04:56:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:16 Parameters OK 04:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:16 Set A/D data flow result=40 04:56:16 Set A/D channel type result=40 04:56:16 Set A/D encoding result=40 04:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:16 Set channel filter=0.000000e+000 result=40 04:56:16 Config A/D Result=40 04:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:16 Get A/D filter: -9.255963e+061 result=40 04:56:16 Get A/D value=-858993460 result=40 04:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:16 Parameters OK 04:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:16 Set A/D data flow result=40 04:56:16 Set A/D channel type result=40 04:56:16 Set A/D encoding result=40 04:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:16 Set channel filter=0.000000e+000 result=40 04:56:16 Config A/D Result=40 04:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:16 Get A/D filter: -9.255963e+061 result=40 04:56:16 Get A/D value=-858993460 result=40 04:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:16 Aux= 04:56:16 Message to Camera, serial 1748 queued 04:56:47 Received message from Master: op=PointingHead serial=1755 04:56:47 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 04:56:47 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 04:56:47 Point started: ret=0 04:56:47 point_skyscan result=0 04:56:48 Check angles 04:56:48 SkyScan query 04:56:49 SkyScan query done: ret=0 az=152.925<-10195 ze=8.49<-11434 Statuses=0009 0009 04:56:49 Msec=0 True Az=152.925 Ze=8.49 Az status=0009 Ze status=0009 04:56:49 Check angles 04:56:49 SkyScan query 04:56:49 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.45<-12830 Statuses=0009 0009 04:56:49 Msec=750 True Az=135.435 Ze=-12.45 Az status=0009 Ze status=0009 04:56:50 Check angles 04:56:50 SkyScan query 04:56:50 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.825<-14255 Statuses=0009 0009 04:56:50 Msec=1500 True Az=117.54 Ze=-33.825 Az status=0009 Ze status=0009 04:56:50 Check angles 04:56:50 SkyScan query 04:56:51 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.54<-15436 Statuses=0009 0009 04:56:51 Msec=2250 True Az=100.17 Ze=-51.54 Az status=0009 Ze status=0009 04:56:51 Check angles 04:56:51 SkyScan query 04:56:52 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 04:56:52 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 04:56:52 Check angles 04:56:52 SkyScan query 04:56:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:56:52 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 04:56:52 Message to Master queued w/err=0: serial=1755 error=0 04:56:57 Received message from Master: op=Filter serial=1756 04:56:57 Color wheel filter change from 0 to 0 04:56:57 FLIGetFilterPos err=0 currentPosition=0 04:56:57 FLIGetStepsRemaining err=0 RemainingSteps=0 04:56:57 Filter is already there-color wheel unchanged 04:56:58 Received message from Master: op=Shutter serial=1757 04:56:58 Shutter LASER close 04:56:58 Received message from Camera: op=State serial=1759 04:56:58 GetSingleValue result=40 Value=cccccccc 04:56:58 SkyScan query 04:56:58 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 04:56:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:58 Parameters OK 04:56:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:58 Set A/D data flow result=40 04:56:58 Set A/D channel type result=40 04:56:58 Set A/D encoding result=40 04:56:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:58 Set channel filter=0.000000e+000 result=40 04:56:58 Config A/D Result=40 04:56:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:58 Get A/D filter: -9.255963e+061 result=40 04:56:58 Get A/D value=-858993460 result=40 04:56:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:56:58 Parameters OK 04:56:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:56:58 Set A/D data flow result=40 04:56:58 Set A/D channel type result=40 04:56:58 Set A/D encoding result=40 04:56:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:56:58 Set channel filter=0.000000e+000 result=40 04:56:58 Config A/D Result=40 04:56:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:56:58 Get A/D filter: -9.255963e+061 result=40 04:56:58 Get A/D value=-858993460 result=40 04:56:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:56:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:56:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:56:58 Aux= 04:56:58 Message to Camera, serial 1759 queued 04:57:29 Received message from Master: op=PointingHead serial=1766 04:57:29 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 04:57:29 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 04:57:29 Point started: ret=0 04:57:29 point_skyscan result=0 04:57:30 Check angles 04:57:30 SkyScan query 04:57:31 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.075<-17405 Statuses=0009 0009 04:57:31 Msec=0 True Az=108.855 Ze=-81.075 Az status=0009 Ze status=0009 04:57:31 Check angles 04:57:31 SkyScan query 04:57:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.045<-18803 Statuses=0008 0009 04:57:32 Msec=750 True Az=113.01 Ze=-102.045 Az status=0008 Ze status=0009 04:57:32 Check angles 04:57:32 SkyScan query 04:57:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.45<-20230 Statuses=0008 0009 04:57:32 Msec=1500 True Az=113.01 Ze=-123.45 Az status=0008 Ze status=0009 04:57:33 Check angles 04:57:33 SkyScan query 04:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 04:57:33 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 04:57:33 Check angles 04:57:33 SkyScan query 04:57:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.75<-23050 Statuses=0008 0009 04:57:34 Msec=3000 True Az=112.995 Ze=-165.75 Az status=0008 Ze status=0009 04:57:34 Check angles 04:57:34 SkyScan query 04:57:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 04:57:35 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 04:57:35 Message to Master queued w/err=0: serial=1766 error=0 04:57:40 Received message from Master: op=Filter serial=1767 04:57:40 Color wheel filter change from 0 to 0 04:57:40 FLIGetFilterPos err=0 currentPosition=0 04:57:40 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:40 Filter is already there-color wheel unchanged 04:57:40 Received message from Master: op=Shutter serial=1768 04:57:40 Shutter LASER open 04:57:40 Received message from Camera: op=State serial=1770 04:57:40 GetSingleValue result=40 Value=cccccccc 04:57:40 SkyScan query 04:57:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 04:57:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:41 Parameters OK 04:57:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:41 Set A/D data flow result=40 04:57:41 Set A/D channel type result=40 04:57:41 Set A/D encoding result=40 04:57:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:41 Set channel filter=0.000000e+000 result=40 04:57:41 Config A/D Result=40 04:57:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:41 Get A/D filter: -9.255963e+061 result=40 04:57:41 Get A/D value=-858993460 result=40 04:57:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:41 Parameters OK 04:57:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:41 Set A/D data flow result=40 04:57:41 Set A/D channel type result=40 04:57:41 Set A/D encoding result=40 04:57:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:41 Set channel filter=0.000000e+000 result=40 04:57:41 Config A/D Result=40 04:57:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:41 Get A/D filter: -9.255963e+061 result=40 04:57:41 Get A/D value=-858993460 result=40 04:57:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:41 Aux= 04:57:41 Message to Camera, serial 1770 queued 04:57:43 Received message from Master: op=Shutter serial=1774 04:57:43 Shutter LASER close 04:57:43 Received message from Master: op=PointingHead serial=1778 04:57:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 04:57:43 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 04:57:44 Point started: ret=0 04:57:44 point_skyscan result=0 04:57:44 Check angles 04:57:44 SkyScan query 04:57:45 SkyScan query done: ret=0 az=90.18<-6012 ze=157.47<-1502 Statuses=0009 0009 04:57:45 Msec=0 True Az=90.18 Ze=157.47 Az status=0009 Ze status=0009 04:57:45 Check angles 04:57:45 SkyScan query 04:57:46 SkyScan query done: ret=0 az=72.315<-4821 ze=136.08<-2928 Statuses=0009 0009 04:57:46 Msec=750 True Az=72.315 Ze=136.08 Az status=0009 Ze status=0009 04:57:46 Check angles 04:57:46 SkyScan query 04:57:47 SkyScan query done: ret=0 az=54.555<-3637 ze=114.69<-4354 Statuses=0009 0009 04:57:47 Msec=1500 True Az=54.555 Ze=114.69 Az status=0009 Ze status=0009 04:57:47 Check angles 04:57:47 SkyScan query 04:57:47 SkyScan query done: ret=0 az=41.04<-2736 ze=93.735<-5751 Statuses=0009 0009 04:57:47 Msec=2250 True Az=41.04 Ze=93.735 Az status=0009 Ze status=0009 04:57:48 Check angles 04:57:48 SkyScan query 04:57:48 SkyScan query done: ret=0 az=40.995<-2733 ze=72.765<-7149 Statuses=0008 0009 04:57:48 Msec=3000 True Az=40.995 Ze=72.765 Az status=0008 Ze status=0009 04:57:48 Check angles 04:57:48 SkyScan query 04:57:49 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 04:57:49 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 04:57:49 Check angles 04:57:49 SkyScan query 04:57:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 04:57:50 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 04:57:50 Message to Master queued w/err=0: serial=1778 error=0 04:57:55 Received message from Master: op=Filter serial=1779 04:57:55 Color wheel filter change from 0 to 0 04:57:55 FLIGetFilterPos err=0 currentPosition=0 04:57:55 FLIGetStepsRemaining err=0 RemainingSteps=0 04:57:55 Filter is already there-color wheel unchanged 04:57:55 Received message from Master: op=Shutter serial=1780 04:57:55 Shutter LASER close 04:57:55 Received message from Camera: op=State serial=1782 04:57:55 GetSingleValue result=40 Value=cccccccc 04:57:55 SkyScan query 04:57:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 04:57:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:56 Parameters OK 04:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:56 Set A/D data flow result=40 04:57:56 Set A/D channel type result=40 04:57:56 Set A/D encoding result=40 04:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:56 Set channel filter=0.000000e+000 result=40 04:57:56 Config A/D Result=40 04:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:56 Get A/D filter: -9.255963e+061 result=40 04:57:56 Get A/D value=-858993460 result=40 04:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:57:56 Parameters OK 04:57:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:57:56 Set A/D data flow result=40 04:57:56 Set A/D channel type result=40 04:57:56 Set A/D encoding result=40 04:57:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:57:56 Set channel filter=0.000000e+000 result=40 04:57:56 Config A/D Result=40 04:57:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:57:56 Get A/D filter: -9.255963e+061 result=40 04:57:56 Get A/D value=-858993460 result=40 04:57:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:57:56 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:57:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:57:56 Aux= 04:57:56 Message to Camera, serial 1782 queued 04:58:26 Received message from Master: op=PointingHead serial=1789 04:58:26 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 04:58:26 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 04:58:27 Point started: ret=0 04:58:27 point_skyscan result=0 04:58:27 Check angles 04:58:27 SkyScan query 04:58:28 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 04:58:28 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 04:58:28 Check angles 04:58:28 SkyScan query 04:58:29 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 04:58:29 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 04:58:29 Check angles 04:58:29 SkyScan query 04:58:30 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 04:58:30 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 04:58:30 Check angles 04:58:30 SkyScan query 04:58:30 SkyScan query done: ret=0 az=116.73<-7782 ze=66.495<-7567 Statuses=0009 0008 04:58:30 Msec=2250 True Az=116.73 Ze=66.495 Az status=0009 Ze status=0008 04:58:30 Check angles 04:58:30 SkyScan query 04:58:31 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 04:58:31 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 04:58:31 Check angles 04:58:31 SkyScan query 04:58:32 SkyScan query done: ret=0 az=151.545<-10103 ze=66.495<-7567 Statuses=0009 0008 04:58:32 Msec=3750 True Az=151.545 Ze=66.495 Az status=0009 Ze status=0008 04:58:32 Check angles 04:58:32 SkyScan query 04:58:33 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 04:58:33 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 04:58:33 Message to Master queued w/err=0: serial=1789 error=0 04:58:38 Received message from Master: op=Filter serial=1790 04:58:38 Color wheel filter change from 0 to 0 04:58:38 FLIGetFilterPos err=0 currentPosition=0 04:58:38 FLIGetStepsRemaining err=0 RemainingSteps=0 04:58:38 Filter is already there-color wheel unchanged 04:58:38 Received message from Master: op=Shutter serial=1791 04:58:38 Shutter LASER close 04:58:38 Received message from Camera: op=State serial=1793 04:58:38 GetSingleValue result=40 Value=cccccccc 04:58:38 SkyScan query 04:58:38 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 04:58:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:38 Parameters OK 04:58:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:38 Set A/D data flow result=40 04:58:38 Set A/D channel type result=40 04:58:38 Set A/D encoding result=40 04:58:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:38 Set channel filter=0.000000e+000 result=40 04:58:38 Config A/D Result=40 04:58:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:38 Get A/D filter: -9.255963e+061 result=40 04:58:38 Get A/D value=-858993460 result=40 04:58:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:58:38 Parameters OK 04:58:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:58:38 Set A/D data flow result=40 04:58:38 Set A/D channel type result=40 04:58:38 Set A/D encoding result=40 04:58:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:58:38 Set channel filter=0.000000e+000 result=40 04:58:38 Config A/D Result=40 04:58:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:58:38 Get A/D filter: -9.255963e+061 result=40 04:58:38 Get A/D value=-858993460 result=40 04:58:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:58:38 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:58:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:58:38 Aux= 04:58:38 Message to Camera, serial 1793 queued 04:59:09 Received message from Master: op=PointingHead serial=1800 04:59:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 04:59:09 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 04:59:10 Point started: ret=0 04:59:10 point_skyscan result=0 04:59:10 Check angles 04:59:10 SkyScan query 04:59:11 SkyScan query done: ret=0 az=135.18<-9012 ze=36.96<-9536 Statuses=0009 0009 04:59:11 Msec=0 True Az=135.18 Ze=36.96 Az status=0009 Ze status=0009 04:59:11 Check angles 04:59:11 SkyScan query 04:59:12 SkyScan query done: ret=0 az=117.72<-7848 ze=15.99<-10934 Statuses=0009 0009 04:59:12 Msec=750 True Az=117.72 Ze=15.99 Az status=0009 Ze status=0009 04:59:12 Check angles 04:59:12 SkyScan query 04:59:12 SkyScan query done: ret=0 az=100.32<-6688 ze=-4.965<-12331 Statuses=0009 0009 04:59:12 Msec=1500 True Az=100.32 Ze=-4.965 Az status=0009 Ze status=0009 04:59:13 Check angles 04:59:13 SkyScan query 04:59:13 SkyScan query done: ret=0 az=82.77<-5518 ze=-25.95<-13730 Statuses=0009 0009 04:59:13 Msec=2250 True Az=82.77 Ze=-25.95 Az status=0009 Ze status=0009 04:59:13 Check angles 04:59:13 SkyScan query 04:59:14 SkyScan query done: ret=0 az=65.355<-4357 ze=-38.565<-14571 Statuses=0009 0008 04:59:14 Msec=3000 True Az=65.355 Ze=-38.565 Az status=0009 Ze status=0008 04:59:14 Check angles 04:59:14 SkyScan query 04:59:15 SkyScan query done: ret=0 az=47.88<-3192 ze=-38.535<-14569 Statuses=0009 0008 04:59:15 Msec=3750 True Az=47.88 Ze=-38.535 Az status=0009 Ze status=0008 04:59:15 Check angles 04:59:15 SkyScan query 04:59:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:59:15 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 04:59:15 Message to Master queued w/err=0: serial=1800 error=0 04:59:20 Received message from Master: op=Filter serial=1801 04:59:20 Color wheel filter change from 0 to 0 04:59:20 FLIGetFilterPos err=0 currentPosition=0 04:59:20 FLIGetStepsRemaining err=0 RemainingSteps=0 04:59:20 Filter is already there-color wheel unchanged 04:59:21 Received message from Master: op=Shutter serial=1802 04:59:21 Shutter LASER close 04:59:21 Received message from Camera: op=State serial=1804 04:59:21 GetSingleValue result=40 Value=cccccccc 04:59:21 SkyScan query 04:59:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 04:59:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:21 Parameters OK 04:59:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:21 Set A/D data flow result=40 04:59:21 Set A/D channel type result=40 04:59:21 Set A/D encoding result=40 04:59:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:21 Set channel filter=0.000000e+000 result=40 04:59:21 Config A/D Result=40 04:59:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:21 Get A/D filter: -9.255963e+061 result=40 04:59:21 Get A/D value=-858993460 result=40 04:59:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 04:59:21 Parameters OK 04:59:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 04:59:21 Set A/D data flow result=40 04:59:21 Set A/D channel type result=40 04:59:21 Set A/D encoding result=40 04:59:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 04:59:21 Set channel filter=0.000000e+000 result=40 04:59:21 Config A/D Result=40 04:59:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 04:59:21 Get A/D filter: -9.255963e+061 result=40 04:59:21 Get A/D value=-858993460 result=40 04:59:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 04:59:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 04:59:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 04:59:21 Aux= 04:59:21 Message to Camera, serial 1804 queued 04:59:52 Received message from Master: op=PointingHead serial=1811 04:59:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 04:59:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 04:59:52 Point started: ret=0 04:59:52 point_skyscan result=0 04:59:53 Check angles 04:59:53 SkyScan query 04:59:54 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.22<-16548 Statuses=0009 0009 04:59:54 Msec=0 True Az=63.885 Ze=-68.22 Az status=0009 Ze status=0009 04:59:54 Check angles 04:59:54 SkyScan query 04:59:54 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.205<-17947 Statuses=0009 0009 04:59:54 Msec=750 True Az=81.585 Ze=-89.205 Az status=0009 Ze status=0009 04:59:55 Check angles 04:59:55 SkyScan query 04:59:55 SkyScan query done: ret=0 az=99<-6600 ze=-110.145<-19343 Statuses=0009 0009 04:59:55 Msec=1500 True Az=99 Ze=-110.145 Az status=0009 Ze status=0009 04:59:55 Check angles 04:59:55 SkyScan query 04:59:56 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.52<-20768 Statuses=0009 0009 04:59:56 Msec=2250 True Az=116.715 Ze=-131.52 Az status=0009 Ze status=0009 04:59:56 Check angles 04:59:56 SkyScan query 04:59:57 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 04:59:57 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 04:59:57 Check angles 04:59:57 SkyScan query 04:59:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 04:59:57 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 04:59:57 Message to Master queued w/err=0: serial=1811 error=0 05:00:02 Received message from Master: op=Filter serial=1812 05:00:02 Color wheel filter change from 0 to 0 05:00:02 FLIGetFilterPos err=0 currentPosition=0 05:00:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:02 Filter is already there-color wheel unchanged 05:00:03 Received message from Master: op=Shutter serial=1813 05:00:03 Shutter LASER close 05:00:03 Received message from Camera: op=State serial=1815 05:00:03 GetSingleValue result=40 Value=cccccccc 05:00:03 SkyScan query 05:00:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:00:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:03 Parameters OK 05:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:03 Set A/D data flow result=40 05:00:03 Set A/D channel type result=40 05:00:03 Set A/D encoding result=40 05:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:03 Set channel filter=0.000000e+000 result=40 05:00:03 Config A/D Result=40 05:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:03 Get A/D filter: -9.255963e+061 result=40 05:00:03 Get A/D value=-858993460 result=40 05:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:03 Parameters OK 05:00:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:03 Set A/D data flow result=40 05:00:03 Set A/D channel type result=40 05:00:03 Set A/D encoding result=40 05:00:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:03 Set channel filter=0.000000e+000 result=40 05:00:03 Config A/D Result=40 05:00:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:03 Get A/D filter: -9.255963e+061 result=40 05:00:03 Get A/D value=-858993460 result=40 05:00:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:03 Aux= 05:00:03 Message to Camera, serial 1815 queued 05:00:34 Received message from Master: op=PointingHead serial=1822 05:00:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:00:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:00:34 Point started: ret=0 05:00:34 point_skyscan result=0 05:00:35 Check angles 05:00:35 SkyScan query 05:00:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 05:00:36 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 05:00:36 Check angles 05:00:36 SkyScan query 05:00:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:00:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:00:36 Message to Master queued w/err=0: serial=1822 error=0 05:00:41 Received message from Master: op=Filter serial=1823 05:00:41 Color wheel filter change from 0 to 0 05:00:41 FLIGetFilterPos err=0 currentPosition=0 05:00:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:41 Filter is already there-color wheel unchanged 05:00:42 Received message from Master: op=Shutter serial=1824 05:00:42 Shutter LASER open 05:00:42 Received message from Camera: op=State serial=1826 05:00:42 GetSingleValue result=40 Value=cccccccc 05:00:42 SkyScan query 05:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:00:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:42 Parameters OK 05:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:42 Set A/D data flow result=40 05:00:42 Set A/D channel type result=40 05:00:42 Set A/D encoding result=40 05:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:42 Set channel filter=0.000000e+000 result=40 05:00:42 Config A/D Result=40 05:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:42 Get A/D filter: -9.255963e+061 result=40 05:00:42 Get A/D value=-858993460 result=40 05:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:42 Parameters OK 05:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:42 Set A/D data flow result=40 05:00:42 Set A/D channel type result=40 05:00:42 Set A/D encoding result=40 05:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:42 Set channel filter=0.000000e+000 result=40 05:00:42 Config A/D Result=40 05:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:42 Get A/D filter: -9.255963e+061 result=40 05:00:42 Get A/D value=-858993460 result=40 05:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:42 Aux= 05:00:42 Message to Camera, serial 1826 queued 05:00:45 Received message from Master: op=Shutter serial=1830 05:00:45 Shutter LASER close 05:00:46 Received message from Master: op=PointingHead serial=1834 05:00:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:00:46 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:00:46 Point started: ret=0 05:00:46 point_skyscan result=0 05:00:47 Check angles 05:00:47 SkyScan query 05:00:47 SkyScan query done: ret=0 az=135.87<-9058 ze=-143.34<-21556 Statuses=0009 0009 05:00:47 Msec=0 True Az=135.87 Ze=-143.34 Az status=0009 Ze status=0009 05:00:47 Check angles 05:00:47 SkyScan query [UTC 2018-12-4 05:00:48] 05:00:48 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.385<-20159 Statuses=0009 0009 05:00:48 Msec=750 True Az=153.39 Ze=-122.385 Az status=0009 Ze status=0009 05:00:48 Check angles 05:00:48 SkyScan query 05:00:49 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.01<-18734 Statuses=0009 0009 05:00:49 Msec=1500 True Az=171.225 Ze=-101.01 Az status=0009 Ze status=0009 05:00:49 Check angles 05:00:49 SkyScan query 05:00:49 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.055<-17337 Statuses=0008 0009 05:00:49 Msec=2250 True Az=176.025 Ze=-80.055 Az status=0008 Ze status=0009 05:00:50 Check angles 05:00:50 SkyScan query 05:00:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.085<-15939 Statuses=0008 0009 05:00:50 Msec=3000 True Az=175.995 Ze=-59.085 Az status=0008 Ze status=0009 05:00:50 Check angles 05:00:50 SkyScan query 05:00:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:00:51 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:00:51 Message to Master queued w/err=0: serial=1834 error=0 05:00:56 Received message from Master: op=Filter serial=1835 05:00:56 Color wheel filter change from 0 to 0 05:00:56 FLIGetFilterPos err=0 currentPosition=0 05:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:00:56 Filter is already there-color wheel unchanged 05:00:56 Received message from Master: op=Shutter serial=1836 05:00:56 Shutter LASER close 05:00:56 Received message from Camera: op=State serial=1838 05:00:56 GetSingleValue result=40 Value=cccccccc 05:00:56 SkyScan query 05:00:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:57 Parameters OK 05:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:57 Set A/D data flow result=40 05:00:57 Set A/D channel type result=40 05:00:57 Set A/D encoding result=40 05:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:57 Set channel filter=0.000000e+000 result=40 05:00:57 Config A/D Result=40 05:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:57 Get A/D filter: -9.255963e+061 result=40 05:00:57 Get A/D value=-858993460 result=40 05:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:00:57 Parameters OK 05:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:00:57 Set A/D data flow result=40 05:00:57 Set A/D channel type result=40 05:00:57 Set A/D encoding result=40 05:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:00:57 Set channel filter=0.000000e+000 result=40 05:00:57 Config A/D Result=40 05:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:00:57 Get A/D filter: -9.255963e+061 result=40 05:00:57 Get A/D value=-858993460 result=40 05:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:00:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:00:57 Aux= 05:00:57 Message to Camera, serial 1838 queued 05:01:28 Received message from Master: op=PointingHead serial=1845 05:01:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:01:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:01:28 Point started: ret=0 05:01:28 point_skyscan result=0 05:01:29 Check angles 05:01:29 SkyScan query 05:01:29 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.21<-13414 Statuses=0009 0009 05:01:29 Msec=0 True Az=152.76 Ze=-21.21 Az status=0009 Ze status=0009 05:01:30 Check angles 05:01:30 SkyScan query 05:01:30 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.675<-12045 Statuses=0009 0009 05:01:30 Msec=750 True Az=135.435 Ze=-0.675 Az status=0009 Ze status=0009 05:01:30 Check angles 05:01:30 SkyScan query 05:01:31 SkyScan query done: ret=0 az=117.825<-7855 ze=20.28<-10648 Statuses=0009 0009 05:01:31 Msec=1500 True Az=117.825 Ze=20.28 Az status=0009 Ze status=0009 05:01:31 Check angles 05:01:31 SkyScan query 05:01:32 SkyScan query done: ret=0 az=100.41<-6694 ze=41.235<-9251 Statuses=0009 0009 05:01:32 Msec=2250 True Az=100.41 Ze=41.235 Az status=0009 Ze status=0009 05:01:32 Check angles 05:01:32 SkyScan query 05:01:32 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:01:32 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:01:33 Check angles 05:01:33 SkyScan query 05:01:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:01:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:01:33 Message to Master queued w/err=0: serial=1845 error=0 05:01:38 Received message from Master: op=Filter serial=1846 05:01:38 Color wheel filter change from 0 to 0 05:01:38 FLIGetFilterPos err=0 currentPosition=0 05:01:38 FLIGetStepsRemaining err=0 RemainingSteps=0 05:01:38 Filter is already there-color wheel unchanged 05:01:38 Received message from Master: op=Shutter serial=1847 05:01:38 Shutter LASER close 05:01:38 Received message from Camera: op=State serial=1849 05:01:38 GetSingleValue result=40 Value=cccccccc 05:01:38 SkyScan query 05:01:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:01:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:39 Parameters OK 05:01:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:39 Set A/D data flow result=40 05:01:39 Set A/D channel type result=40 05:01:39 Set A/D encoding result=40 05:01:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:39 Set channel filter=0.000000e+000 result=40 05:01:39 Config A/D Result=40 05:01:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:39 Get A/D filter: -9.255963e+061 result=40 05:01:39 Get A/D value=-858993460 result=40 05:01:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:01:39 Parameters OK 05:01:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:01:39 Set A/D data flow result=40 05:01:39 Set A/D channel type result=40 05:01:39 Set A/D encoding result=40 05:01:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:01:39 Set channel filter=0.000000e+000 result=40 05:01:39 Config A/D Result=40 05:01:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:01:39 Get A/D filter: -9.255963e+061 result=40 05:01:39 Get A/D value=-858993460 result=40 05:01:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:01:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:01:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:01:39 Aux= 05:01:39 Message to Camera, serial 1849 queued 05:02:10 Received message from Master: op=PointingHead serial=1856 05:02:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:02:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:02:10 Point started: ret=0 05:02:10 point_skyscan result=0 05:02:11 Check angles 05:02:11 SkyScan query 05:02:11 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 05:02:11 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 05:02:12 Check angles 05:02:12 SkyScan query 05:02:12 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 05:02:12 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 05:02:12 Check angles 05:02:12 SkyScan query 05:02:13 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 05:02:13 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 05:02:13 Check angles 05:02:13 SkyScan query 05:02:14 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 05:02:14 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 05:02:14 Check angles 05:02:14 SkyScan query 05:02:15 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:02:15 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:02:15 Check angles 05:02:15 SkyScan query 05:02:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:02:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:02:15 Message to Master queued w/err=0: serial=1856 error=0 05:02:20 Received message from Master: op=Filter serial=1857 05:02:20 Color wheel filter change from 0 to 0 05:02:20 FLIGetFilterPos err=0 currentPosition=0 05:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:02:20 Filter is already there-color wheel unchanged 05:02:20 Received message from Master: op=Shutter serial=1858 05:02:20 Shutter LASER close 05:02:20 Received message from Camera: op=State serial=1860 05:02:20 GetSingleValue result=40 Value=cccccccc 05:02:20 SkyScan query 05:02:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:02:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:21 Parameters OK 05:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:21 Set A/D data flow result=40 05:02:21 Set A/D channel type result=40 05:02:21 Set A/D encoding result=40 05:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:21 Set channel filter=0.000000e+000 result=40 05:02:21 Config A/D Result=40 05:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:21 Get A/D filter: -9.255963e+061 result=40 05:02:21 Get A/D value=-858993460 result=40 05:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:02:21 Parameters OK 05:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:02:21 Set A/D data flow result=40 05:02:21 Set A/D channel type result=40 05:02:21 Set A/D encoding result=40 05:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:02:21 Set channel filter=0.000000e+000 result=40 05:02:21 Config A/D Result=40 05:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:02:21 Get A/D filter: -9.255963e+061 result=40 05:02:21 Get A/D value=-858993460 result=40 05:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:02:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:02:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:02:21 Aux= 05:02:21 Message to Camera, serial 1860 queued 05:02:52 Received message from Master: op=PointingHead serial=1867 05:02:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:02:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:02:52 Point started: ret=0 05:02:52 point_skyscan result=0 05:02:53 Check angles 05:02:53 SkyScan query 05:02:54 SkyScan query done: ret=0 az=152.79<-10186 ze=8.46<-11436 Statuses=0009 0009 05:02:54 Msec=0 True Az=152.79 Ze=8.46 Az status=0009 Ze status=0009 05:02:54 Check angles 05:02:54 SkyScan query 05:02:54 SkyScan query done: ret=0 az=134.925<-8995 ze=-12.945<-12863 Statuses=0009 0009 05:02:54 Msec=750 True Az=134.925 Ze=-12.945 Az status=0009 Ze status=0009 05:02:55 Check angles 05:02:55 SkyScan query 05:02:55 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.855<-14257 Statuses=0009 0009 05:02:55 Msec=1500 True Az=117.42 Ze=-33.855 Az status=0009 Ze status=0009 05:02:55 Check angles 05:02:55 SkyScan query 05:02:56 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.54<-15436 Statuses=0009 0009 05:02:56 Msec=2250 True Az=100.02 Ze=-51.54 Az status=0009 Ze status=0009 05:02:56 Check angles 05:02:56 SkyScan query 05:02:57 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:02:57 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:02:57 Check angles 05:02:57 SkyScan query 05:02:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:02:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:02:57 Message to Master queued w/err=0: serial=1867 error=0 05:03:02 Received message from Master: op=Filter serial=1868 05:03:02 Color wheel filter change from 0 to 0 05:03:02 FLIGetFilterPos err=0 currentPosition=0 05:03:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:02 Filter is already there-color wheel unchanged 05:03:03 Received message from Master: op=Shutter serial=1869 05:03:03 Shutter LASER close 05:03:03 Received message from Camera: op=State serial=1871 05:03:03 GetSingleValue result=40 Value=cccccccc 05:03:03 SkyScan query 05:03:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:03:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:03 Parameters OK 05:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:03 Set A/D data flow result=40 05:03:03 Set A/D channel type result=40 05:03:03 Set A/D encoding result=40 05:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:03 Set channel filter=0.000000e+000 result=40 05:03:03 Config A/D Result=40 05:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:03 Get A/D filter: -9.255963e+061 result=40 05:03:03 Get A/D value=-858993460 result=40 05:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:03 Parameters OK 05:03:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:03 Set A/D data flow result=40 05:03:03 Set A/D channel type result=40 05:03:03 Set A/D encoding result=40 05:03:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:03 Set channel filter=0.000000e+000 result=40 05:03:03 Config A/D Result=40 05:03:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:03 Get A/D filter: -9.255963e+061 result=40 05:03:03 Get A/D value=-858993460 result=40 05:03:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:03 Aux= 05:03:03 Message to Camera, serial 1871 queued 05:03:34 Received message from Master: op=PointingHead serial=1878 05:03:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:03:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:03:34 Point started: ret=0 05:03:34 point_skyscan result=0 05:03:35 Check angles 05:03:35 SkyScan query 05:03:36 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.03<-17402 Statuses=0009 0009 05:03:36 Msec=0 True Az=108.795 Ze=-81.03 Az status=0009 Ze status=0009 05:03:36 Check angles 05:03:36 SkyScan query 05:03:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-101.985<-18799 Statuses=0008 0009 05:03:36 Msec=750 True Az=113.01 Ze=-101.985 Az status=0008 Ze status=0009 05:03:37 Check angles 05:03:37 SkyScan query 05:03:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.36<-20224 Statuses=0008 0009 05:03:37 Msec=1500 True Az=113.01 Ze=-123.36 Az status=0008 Ze status=0009 05:03:37 Check angles 05:03:37 SkyScan query 05:03:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 05:03:38 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 05:03:38 Check angles 05:03:38 SkyScan query 05:03:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 05:03:39 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 05:03:39 Check angles 05:03:39 SkyScan query 05:03:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:03:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:03:39 Message to Master queued w/err=0: serial=1878 error=0 05:03:44 Received message from Master: op=Filter serial=1879 05:03:44 Color wheel filter change from 0 to 0 05:03:44 FLIGetFilterPos err=0 currentPosition=0 05:03:44 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:44 Filter is already there-color wheel unchanged 05:03:45 Received message from Master: op=Shutter serial=1880 05:03:45 Shutter LASER open 05:03:45 Received message from Camera: op=State serial=1882 05:03:45 GetSingleValue result=40 Value=cccccccc 05:03:45 SkyScan query 05:03:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:03:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:45 Parameters OK 05:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:45 Set A/D data flow result=40 05:03:45 Set A/D channel type result=40 05:03:45 Set A/D encoding result=40 05:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:45 Set channel filter=0.000000e+000 result=40 05:03:45 Config A/D Result=40 05:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:45 Get A/D filter: -9.255963e+061 result=40 05:03:45 Get A/D value=-858993460 result=40 05:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:03:45 Parameters OK 05:03:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:03:45 Set A/D data flow result=40 05:03:45 Set A/D channel type result=40 05:03:45 Set A/D encoding result=40 05:03:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:03:45 Set channel filter=0.000000e+000 result=40 05:03:45 Config A/D Result=40 05:03:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:03:45 Get A/D filter: -9.255963e+061 result=40 05:03:45 Get A/D value=-858993460 result=40 05:03:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:03:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:03:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:03:45 Aux= 05:03:45 Message to Camera, serial 1882 queued 05:03:48 Received message from Master: op=Shutter serial=1886 05:03:48 Shutter LASER close 05:03:48 Received message from Master: op=PointingHead serial=1890 05:03:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:03:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:03:49 Point started: ret=0 05:03:49 point_skyscan result=0 05:03:49 Check angles 05:03:49 SkyScan query 05:03:50 SkyScan query done: ret=0 az=89.64<-5976 ze=156.855<-1543 Statuses=0009 0009 05:03:50 Msec=0 True Az=89.64 Ze=156.855 Az status=0009 Ze status=0009 05:03:50 Check angles 05:03:50 SkyScan query 05:03:51 SkyScan query done: ret=0 az=72.18<-4812 ze=135.885<-2941 Statuses=0009 0009 05:03:51 Msec=750 True Az=72.18 Ze=135.885 Az status=0009 Ze status=0009 05:03:51 Check angles 05:03:51 SkyScan query 05:03:51 SkyScan query done: ret=0 az=54.705<-3647 ze=114.93<-4338 Statuses=0009 0009 05:03:51 Msec=1500 True Az=54.705 Ze=114.93 Az status=0009 Ze status=0009 05:03:52 Check angles 05:03:52 SkyScan query 05:03:52 SkyScan query done: ret=0 az=40.905<-2727 ze=93.525<-5765 Statuses=0009 0009 05:03:52 Msec=2250 True Az=40.905 Ze=93.525 Az status=0009 Ze status=0009 05:03:52 Check angles 05:03:52 SkyScan query 05:03:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 05:03:53 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 05:03:53 Check angles 05:03:53 SkyScan query 05:03:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 05:03:54 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 05:03:54 Check angles 05:03:54 SkyScan query 05:03:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:03:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:03:54 Message to Master queued w/err=0: serial=1890 error=0 05:03:59 Received message from Master: op=Filter serial=1891 05:03:59 Color wheel filter change from 0 to 0 05:03:59 FLIGetFilterPos err=0 currentPosition=0 05:03:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:03:59 Filter is already there-color wheel unchanged 05:04:00 Received message from Master: op=Shutter serial=1892 05:04:00 Shutter LASER close 05:04:00 Received message from Camera: op=State serial=1894 05:04:00 GetSingleValue result=40 Value=cccccccc 05:04:00 SkyScan query 05:04:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:04:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:00 Parameters OK 05:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:00 Set A/D data flow result=40 05:04:00 Set A/D channel type result=40 05:04:00 Set A/D encoding result=40 05:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:00 Set channel filter=0.000000e+000 result=40 05:04:00 Config A/D Result=40 05:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:00 Get A/D filter: -9.255963e+061 result=40 05:04:00 Get A/D value=-858993460 result=40 05:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:00 Parameters OK 05:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:00 Set A/D data flow result=40 05:04:00 Set A/D channel type result=40 05:04:00 Set A/D encoding result=40 05:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:00 Set channel filter=0.000000e+000 result=40 05:04:00 Config A/D Result=40 05:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:00 Get A/D filter: -9.255963e+061 result=40 05:04:00 Get A/D value=-858993460 result=40 05:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:00 Aux= 05:04:00 Message to Camera, serial 1894 queued 05:04:31 Received message from Master: op=PointingHead serial=1901 05:04:31 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:04:31 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:04:32 Point started: ret=0 05:04:32 point_skyscan result=0 05:04:32 Check angles 05:04:32 SkyScan query 05:04:33 SkyScan query done: ret=0 az=64.095<-4273 ze=66.54<-7564 Statuses=0009 0008 05:04:33 Msec=0 True Az=64.095 Ze=66.54 Az status=0009 Ze status=0008 05:04:33 Check angles 05:04:33 SkyScan query 05:04:34 SkyScan query done: ret=0 az=81.585<-5439 ze=66.51<-7566 Statuses=0009 0008 05:04:34 Msec=750 True Az=81.585 Ze=66.51 Az status=0009 Ze status=0008 05:04:34 Check angles 05:04:34 SkyScan query 05:04:34 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 05:04:34 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 05:04:35 Check angles 05:04:35 SkyScan query 05:04:35 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 05:04:35 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 05:04:35 Check angles 05:04:35 SkyScan query 05:04:36 SkyScan query done: ret=0 az=134.175<-8945 ze=66.495<-7567 Statuses=0009 0008 05:04:36 Msec=3000 True Az=134.175 Ze=66.495 Az status=0009 Ze status=0008 05:04:36 Check angles 05:04:36 SkyScan query 05:04:37 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 05:04:37 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 05:04:37 Check angles 05:04:37 SkyScan query 05:04:37 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:04:37 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:04:37 Message to Master queued w/err=0: serial=1901 error=0 05:04:42 Received message from Master: op=Filter serial=1902 05:04:42 Color wheel filter change from 0 to 0 05:04:42 FLIGetFilterPos err=0 currentPosition=0 05:04:42 FLIGetStepsRemaining err=0 RemainingSteps=0 05:04:42 Filter is already there-color wheel unchanged 05:04:43 Received message from Master: op=Shutter serial=1903 05:04:43 Shutter LASER close 05:04:43 Received message from Camera: op=State serial=1905 05:04:43 GetSingleValue result=40 Value=cccccccc 05:04:43 SkyScan query 05:04:43 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:04:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:43 Parameters OK 05:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:43 Set A/D data flow result=40 05:04:43 Set A/D channel type result=40 05:04:43 Set A/D encoding result=40 05:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:43 Set channel filter=0.000000e+000 result=40 05:04:43 Config A/D Result=40 05:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:43 Get A/D filter: -9.255963e+061 result=40 05:04:43 Get A/D value=-858993460 result=40 05:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:04:43 Parameters OK 05:04:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:04:43 Set A/D data flow result=40 05:04:43 Set A/D channel type result=40 05:04:43 Set A/D encoding result=40 05:04:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:04:43 Set channel filter=0.000000e+000 result=40 05:04:43 Config A/D Result=40 05:04:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:04:43 Get A/D filter: -9.255963e+061 result=40 05:04:43 Get A/D value=-858993460 result=40 05:04:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:04:43 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:04:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:04:43 Aux= 05:04:43 Message to Camera, serial 1905 queued 05:05:14 Received message from Master: op=PointingHead serial=1912 05:05:14 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:05:14 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:05:14 Point started: ret=0 05:05:14 point_skyscan result=0 05:05:15 Check angles 05:05:15 SkyScan query 05:05:16 SkyScan query done: ret=0 az=135.03<-9002 ze=36.645<-9557 Statuses=0009 0009 05:05:16 Msec=0 True Az=135.03 Ze=36.645 Az status=0009 Ze status=0009 05:05:16 Check angles 05:05:16 SkyScan query 05:05:16 SkyScan query done: ret=0 az=117.315<-7821 ze=15.69<-10954 Statuses=0009 0009 05:05:16 Msec=750 True Az=117.315 Ze=15.69 Az status=0009 Ze status=0009 05:05:17 Check angles 05:05:17 SkyScan query 05:05:17 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.265<-12351 Statuses=0009 0009 05:05:17 Msec=1500 True Az=100.14 Ze=-5.265 Az status=0009 Ze status=0009 05:05:17 Check angles 05:05:17 SkyScan query 05:05:18 SkyScan query done: ret=0 az=82.605<-5507 ze=-26.235<-13749 Statuses=0009 0009 05:05:18 Msec=2250 True Az=82.605 Ze=-26.235 Az status=0009 Ze status=0009 05:05:18 Check angles 05:05:18 SkyScan query 05:05:19 SkyScan query done: ret=0 az=65.145<-4343 ze=-38.565<-14571 Statuses=0009 0008 05:05:19 Msec=3000 True Az=65.145 Ze=-38.565 Az status=0009 Ze status=0008 05:05:19 Check angles 05:05:19 SkyScan query 05:05:19 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.535<-14569 Statuses=0009 0008 05:05:19 Msec=3750 True Az=47.61 Ze=-38.535 Az status=0009 Ze status=0008 05:05:20 Check angles 05:05:20 SkyScan query 05:05:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:05:20 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:05:20 Message to Master queued w/err=0: serial=1912 error=0 05:05:25 Received message from Master: op=Filter serial=1913 05:05:25 Color wheel filter change from 0 to 0 05:05:25 FLIGetFilterPos err=0 currentPosition=0 05:05:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:05:25 Filter is already there-color wheel unchanged 05:05:25 Received message from Master: op=Shutter serial=1914 05:05:25 Shutter LASER close 05:05:25 Received message from Camera: op=State serial=1916 05:05:25 GetSingleValue result=40 Value=cccccccc 05:05:25 SkyScan query 05:05:26 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:05:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:26 Parameters OK 05:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:26 Set A/D data flow result=40 05:05:26 Set A/D channel type result=40 05:05:26 Set A/D encoding result=40 05:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:26 Set channel filter=0.000000e+000 result=40 05:05:26 Config A/D Result=40 05:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:26 Get A/D filter: -9.255963e+061 result=40 05:05:26 Get A/D value=-858993460 result=40 05:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:05:26 Parameters OK 05:05:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:05:26 Set A/D data flow result=40 05:05:26 Set A/D channel type result=40 05:05:26 Set A/D encoding result=40 05:05:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:05:26 Set channel filter=0.000000e+000 result=40 05:05:26 Config A/D Result=40 05:05:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:05:26 Get A/D filter: -9.255963e+061 result=40 05:05:26 Get A/D value=-858993460 result=40 05:05:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:05:26 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:05:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:05:26 Aux= 05:05:26 Message to Camera, serial 1916 queued 05:05:57 Received message from Master: op=PointingHead serial=1923 05:05:57 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:05:57 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:05:57 Point started: ret=0 05:05:57 point_skyscan result=0 05:05:58 Check angles 05:05:58 SkyScan query 05:05:59 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.745<-16583 Statuses=0009 0009 05:05:59 Msec=0 True Az=64.395 Ze=-68.745 Az status=0009 Ze status=0009 05:05:59 Check angles 05:05:59 SkyScan query 05:05:59 SkyScan query done: ret=0 az=82.455<-5497 ze=-90.135<-18009 Statuses=0009 0009 05:05:59 Msec=750 True Az=82.455 Ze=-90.135 Az status=0009 Ze status=0009 05:05:59 Check angles 05:05:59 SkyScan query 05:06:00 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.075<-19405 Statuses=0009 0009 05:06:00 Msec=1500 True Az=99.72 Ze=-111.075 Az status=0009 Ze status=0009 05:06:00 Check angles 05:06:00 SkyScan query 05:06:01 SkyScan query done: ret=0 az=117.57<-7838 ze=-132.465<-20831 Statuses=0009 0009 05:06:01 Msec=2250 True Az=117.57 Ze=-132.465 Az status=0009 Ze status=0009 05:06:01 Check angles 05:06:01 SkyScan query 05:06:02 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.525<-21435 Statuses=0009 0008 05:06:02 Msec=3000 True Az=131.04 Ze=-141.525 Az status=0009 Ze status=0008 05:06:02 Check angles 05:06:02 SkyScan query 05:06:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:06:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:06:02 Message to Master queued w/err=0: serial=1923 error=0 05:06:07 Received message from Master: op=Filter serial=1924 05:06:07 Color wheel filter change from 0 to 0 05:06:07 FLIGetFilterPos err=0 currentPosition=0 05:06:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:07 Filter is already there-color wheel unchanged 05:06:07 Received message from Master: op=Shutter serial=1925 05:06:07 Shutter LASER close 05:06:08 Received message from Camera: op=State serial=1927 05:06:08 GetSingleValue result=40 Value=cccccccc 05:06:08 SkyScan query 05:06:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:06:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:08 Parameters OK 05:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:08 Set A/D data flow result=40 05:06:08 Set A/D channel type result=40 05:06:08 Set A/D encoding result=40 05:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:08 Set channel filter=0.000000e+000 result=40 05:06:08 Config A/D Result=40 05:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:08 Get A/D filter: -9.255963e+061 result=40 05:06:08 Get A/D value=-858993460 result=40 05:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:08 Parameters OK 05:06:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:08 Set A/D data flow result=40 05:06:08 Set A/D channel type result=40 05:06:08 Set A/D encoding result=40 05:06:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:08 Set channel filter=0.000000e+000 result=40 05:06:08 Config A/D Result=40 05:06:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:08 Get A/D filter: -9.255963e+061 result=40 05:06:08 Get A/D value=-858993460 result=40 05:06:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:08 Aux= 05:06:08 Message to Camera, serial 1927 queued 05:06:39 Received message from Master: op=PointingHead serial=1934 05:06:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:06:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:06:39 Point started: ret=0 05:06:39 point_skyscan result=0 05:06:40 Check angles 05:06:40 SkyScan query 05:06:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 05:06:41 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 05:06:41 Check angles 05:06:41 SkyScan query 05:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:06:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:06:41 Message to Master queued w/err=0: serial=1934 error=0 05:06:46 Received message from Master: op=Filter serial=1935 05:06:46 Color wheel filter change from 0 to 0 05:06:46 FLIGetFilterPos err=0 currentPosition=0 05:06:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:06:46 Filter is already there-color wheel unchanged 05:06:47 Received message from Master: op=Shutter serial=1936 05:06:47 Shutter LASER open 05:06:47 Received message from Camera: op=State serial=1938 05:06:47 GetSingleValue result=40 Value=cccccccc 05:06:47 SkyScan query 05:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:47 Parameters OK 05:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:47 Set A/D data flow result=40 05:06:47 Set A/D channel type result=40 05:06:47 Set A/D encoding result=40 05:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:47 Set channel filter=0.000000e+000 result=40 05:06:47 Config A/D Result=40 05:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:47 Get A/D filter: -9.255963e+061 result=40 05:06:47 Get A/D value=-858993460 result=40 05:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:06:47 Parameters OK 05:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:06:47 Set A/D data flow result=40 05:06:47 Set A/D channel type result=40 05:06:47 Set A/D encoding result=40 05:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:06:47 Set channel filter=0.000000e+000 result=40 05:06:47 Config A/D Result=40 05:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:06:47 Get A/D filter: -9.255963e+061 result=40 05:06:47 Get A/D value=-858993460 result=40 05:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:06:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:06:47 Aux= 05:06:47 Message to Camera, serial 1938 queued 05:06:50 Received message from Master: op=Shutter serial=1942 05:06:50 Shutter LASER close 05:06:50 Received message from Master: op=PointingHead serial=1946 05:06:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:06:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:06:51 Point started: ret=0 05:06:51 point_skyscan result=0 05:06:52 Check angles 05:06:52 SkyScan query 05:06:52 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.325<-21555 Statuses=0009 0009 05:06:52 Msec=0 True Az=135.81 Ze=-143.325 Az status=0009 Ze status=0009 05:06:52 Check angles 05:06:52 SkyScan query 05:06:53 SkyScan query done: ret=0 az=153.75<-10250 ze=-121.995<-20133 Statuses=0009 0009 05:06:53 Msec=750 True Az=153.75 Ze=-121.995 Az status=0009 Ze status=0009 05:06:53 Check angles 05:06:53 SkyScan query 05:06:54 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.635<-18709 Statuses=0009 0009 05:06:54 Msec=1500 True Az=171.54 Ze=-100.635 Az status=0009 Ze status=0009 05:06:54 Check angles 05:06:54 SkyScan query 05:06:54 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.665<-17311 Statuses=0008 0009 05:06:54 Msec=2250 True Az=176.025 Ze=-79.665 Az status=0008 Ze status=0009 05:06:55 Check angles 05:06:55 SkyScan query 05:06:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.71<-15914 Statuses=0008 0009 05:06:55 Msec=3000 True Az=175.995 Ze=-58.71 Az status=0008 Ze status=0009 05:06:55 Check angles 05:06:55 SkyScan query 05:06:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:06:56 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:06:56 Message to Master queued w/err=0: serial=1946 error=0 05:07:01 Received message from Master: op=Filter serial=1947 05:07:01 Color wheel filter change from 0 to 0 05:07:01 FLIGetFilterPos err=0 currentPosition=0 05:07:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:01 Filter is already there-color wheel unchanged 05:07:01 Received message from Master: op=Shutter serial=1948 05:07:01 Shutter LASER close 05:07:01 Received message from Camera: op=State serial=1950 05:07:01 GetSingleValue result=40 Value=cccccccc 05:07:01 SkyScan query 05:07:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:07:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:02 Parameters OK 05:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:02 Set A/D data flow result=40 05:07:02 Set A/D channel type result=40 05:07:02 Set A/D encoding result=40 05:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:02 Set channel filter=0.000000e+000 result=40 05:07:02 Config A/D Result=40 05:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:02 Get A/D filter: -9.255963e+061 result=40 05:07:02 Get A/D value=-858993460 result=40 05:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:02 Parameters OK 05:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:02 Set A/D data flow result=40 05:07:02 Set A/D channel type result=40 05:07:02 Set A/D encoding result=40 05:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:02 Set channel filter=0.000000e+000 result=40 05:07:02 Config A/D Result=40 05:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:02 Get A/D filter: -9.255963e+061 result=40 05:07:02 Get A/D value=-858993460 result=40 05:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:02 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:02 Aux= 05:07:02 Message to Camera, serial 1950 queued 05:07:33 Received message from Master: op=PointingHead serial=1957 05:07:33 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:07:33 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:07:33 Point started: ret=0 05:07:33 point_skyscan result=0 05:07:34 Check angles 05:07:34 SkyScan query 05:07:34 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.855<-13457 Statuses=0009 0009 05:07:34 Msec=0 True Az=152.955 Ze=-21.855 Az status=0009 Ze status=0009 05:07:35 Check angles 05:07:35 SkyScan query 05:07:35 SkyScan query done: ret=0 az=135.555<-9037 ze=-0.885<-12059 Statuses=0009 0009 05:07:35 Msec=750 True Az=135.555 Ze=-0.885 Az status=0009 Ze status=0009 05:07:35 Check angles 05:07:35 SkyScan query 05:07:36 SkyScan query done: ret=0 az=118.065<-7871 ze=20.055<-10663 Statuses=0009 0009 05:07:36 Msec=1500 True Az=118.065 Ze=20.055 Az status=0009 Ze status=0009 05:07:36 Check angles 05:07:36 SkyScan query 05:07:37 SkyScan query done: ret=0 az=100.65<-6710 ze=41.025<-9265 Statuses=0009 0009 05:07:37 Msec=2250 True Az=100.65 Ze=41.025 Az status=0009 Ze status=0009 05:07:37 Check angles 05:07:37 SkyScan query 05:07:37 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:07:37 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:07:38 Check angles 05:07:38 SkyScan query 05:07:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:07:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:07:38 Message to Master queued w/err=0: serial=1957 error=0 05:07:43 Received message from Master: op=Filter serial=1958 05:07:43 Color wheel filter change from 0 to 0 05:07:43 FLIGetFilterPos err=0 currentPosition=0 05:07:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:07:43 Filter is already there-color wheel unchanged 05:07:43 Received message from Master: op=Shutter serial=1959 05:07:43 Shutter LASER close 05:07:43 Received message from Camera: op=State serial=1961 05:07:43 GetSingleValue result=40 Value=cccccccc 05:07:43 SkyScan query 05:07:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:07:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:44 Parameters OK 05:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:44 Set A/D data flow result=40 05:07:44 Set A/D channel type result=40 05:07:44 Set A/D encoding result=40 05:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:44 Set channel filter=0.000000e+000 result=40 05:07:44 Config A/D Result=40 05:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:44 Get A/D filter: -9.255963e+061 result=40 05:07:44 Get A/D value=-858993460 result=40 05:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:07:44 Parameters OK 05:07:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:07:44 Set A/D data flow result=40 05:07:44 Set A/D channel type result=40 05:07:44 Set A/D encoding result=40 05:07:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:07:44 Set channel filter=0.000000e+000 result=40 05:07:44 Config A/D Result=40 05:07:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:07:44 Get A/D filter: -9.255963e+061 result=40 05:07:44 Get A/D value=-858993460 result=40 05:07:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:07:44 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:07:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:07:44 Aux= 05:07:44 Message to Camera, serial 1961 queued 05:08:15 Received message from Master: op=PointingHead serial=1968 05:08:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:08:15 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:08:15 Point started: ret=0 05:08:15 point_skyscan result=0 05:08:16 Check angles 05:08:16 SkyScan query 05:08:16 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 05:08:16 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 05:08:17 Check angles 05:08:17 SkyScan query 05:08:17 SkyScan query done: ret=0 az=126.885<-8459 ze=38.505<-9433 Statuses=0009 0008 05:08:17 Msec=750 True Az=126.885 Ze=38.505 Az status=0009 Ze status=0008 05:08:17 Check angles 05:08:17 SkyScan query 05:08:18 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 05:08:18 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 05:08:18 Check angles 05:08:18 SkyScan query 05:08:19 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 05:08:19 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 05:08:19 Check angles 05:08:19 SkyScan query 05:08:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:08:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:08:20 Check angles 05:08:20 SkyScan query 05:08:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:08:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:08:20 Message to Master queued w/err=0: serial=1968 error=0 05:08:25 Received message from Master: op=Filter serial=1969 05:08:25 Color wheel filter change from 0 to 0 05:08:25 FLIGetFilterPos err=0 currentPosition=0 05:08:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:08:25 Filter is already there-color wheel unchanged 05:08:25 Received message from Master: op=Shutter serial=1970 05:08:25 Shutter LASER close 05:08:25 Received message from Camera: op=State serial=1972 05:08:25 GetSingleValue result=40 Value=cccccccc 05:08:25 SkyScan query 05:08:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:08:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:26 Parameters OK 05:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:26 Set A/D data flow result=40 05:08:26 Set A/D channel type result=40 05:08:26 Set A/D encoding result=40 05:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:26 Set channel filter=0.000000e+000 result=40 05:08:26 Config A/D Result=40 05:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:26 Get A/D filter: -9.255963e+061 result=40 05:08:26 Get A/D value=-858993460 result=40 05:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:08:26 Parameters OK 05:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:08:26 Set A/D data flow result=40 05:08:26 Set A/D channel type result=40 05:08:26 Set A/D encoding result=40 05:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:08:26 Set channel filter=0.000000e+000 result=40 05:08:26 Config A/D Result=40 05:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:08:26 Get A/D filter: -9.255963e+061 result=40 05:08:26 Get A/D value=-858993460 result=40 05:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:08:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:08:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:08:26 Aux= 05:08:26 Message to Camera, serial 1972 queued 05:08:57 Received message from Master: op=PointingHead serial=1979 05:08:57 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:08:57 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:08:57 Point started: ret=0 05:08:57 point_skyscan result=0 05:08:58 Check angles 05:08:58 SkyScan query 05:08:58 SkyScan query done: ret=0 az=153<-10200 ze=8.775<-11415 Statuses=0009 0009 05:08:58 Msec=0 True Az=153 Ze=8.775 Az status=0009 Ze status=0009 05:08:59 Check angles 05:08:59 SkyScan query 05:08:59 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.615<-12841 Statuses=0009 0009 05:08:59 Msec=750 True Az=135.15 Ze=-12.615 Az status=0009 Ze status=0009 05:08:59 Check angles 05:08:59 SkyScan query 05:09:00 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.54<-14236 Statuses=0009 0009 05:09:00 Msec=1500 True Az=117.615 Ze=-33.54 Az status=0009 Ze status=0009 05:09:00 Check angles 05:09:00 SkyScan query 05:09:01 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.54<-15436 Statuses=0009 0009 05:09:01 Msec=2250 True Az=100.2 Ze=-51.54 Az status=0009 Ze status=0009 05:09:01 Check angles 05:09:01 SkyScan query 05:09:02 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:09:02 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:09:02 Check angles 05:09:02 SkyScan query 05:09:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 05:09:02 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 05:09:02 Message to Master queued w/err=0: serial=1979 error=0 05:09:07 Received message from Master: op=Filter serial=1980 05:09:07 Color wheel filter change from 0 to 0 05:09:07 FLIGetFilterPos err=0 currentPosition=0 05:09:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:07 Filter is already there-color wheel unchanged 05:09:07 Received message from Master: op=Shutter serial=1981 05:09:07 Shutter LASER close 05:09:07 Received message from Camera: op=State serial=1983 05:09:07 GetSingleValue result=40 Value=cccccccc 05:09:07 SkyScan query 05:09:08 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:09:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:08 Parameters OK 05:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:08 Set A/D data flow result=40 05:09:08 Set A/D channel type result=40 05:09:08 Set A/D encoding result=40 05:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:08 Set channel filter=0.000000e+000 result=40 05:09:08 Config A/D Result=40 05:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:08 Get A/D filter: -9.255963e+061 result=40 05:09:08 Get A/D value=-858993460 result=40 05:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:08 Parameters OK 05:09:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:08 Set A/D data flow result=40 05:09:08 Set A/D channel type result=40 05:09:08 Set A/D encoding result=40 05:09:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:08 Set channel filter=0.000000e+000 result=40 05:09:08 Config A/D Result=40 05:09:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:08 Get A/D filter: -9.255963e+061 result=40 05:09:08 Get A/D value=-858993460 result=40 05:09:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:08 Aux= 05:09:08 Message to Camera, serial 1983 queued 05:09:39 Received message from Master: op=PointingHead serial=1990 05:09:39 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:09:39 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:09:39 Point started: ret=0 05:09:39 point_skyscan result=0 05:09:40 Check angles 05:09:40 SkyScan query 05:09:41 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.135<-17409 Statuses=0009 0009 05:09:41 Msec=0 True Az=108.855 Ze=-81.135 Az status=0009 Ze status=0009 05:09:41 Check angles 05:09:41 SkyScan query 05:09:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.105<-18807 Statuses=0008 0009 05:09:41 Msec=750 True Az=113.01 Ze=-102.105 Az status=0008 Ze status=0009 05:09:42 Check angles 05:09:42 SkyScan query 05:09:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.045<-20203 Statuses=0008 0009 [UTC 2018-12-4 05:09:42] 05:09:42 Msec=1500 True Az=112.995 Ze=-123.045 Az status=0008 Ze status=0009 05:09:42 Check angles 05:09:42 SkyScan query 05:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 05:09:43 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 05:09:43 Check angles 05:09:43 SkyScan query 05:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.955<-22997 Statuses=0008 0009 05:09:44 Msec=3000 True Az=112.995 Ze=-164.955 Az status=0008 Ze status=0009 05:09:44 Check angles 05:09:44 SkyScan query 05:09:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:09:44 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:09:44 Message to Master queued w/err=0: serial=1990 error=0 05:09:49 Received message from Master: op=Filter serial=1991 05:09:49 Color wheel filter change from 0 to 0 05:09:49 FLIGetFilterPos err=0 currentPosition=0 05:09:49 FLIGetStepsRemaining err=0 RemainingSteps=0 05:09:49 Filter is already there-color wheel unchanged 05:09:50 Received message from Master: op=Shutter serial=1992 05:09:50 Shutter LASER open 05:09:50 Received message from Camera: op=State serial=1994 05:09:50 GetSingleValue result=40 Value=cccccccc 05:09:50 SkyScan query 05:09:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:09:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:50 Parameters OK 05:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:50 Set A/D data flow result=40 05:09:50 Set A/D channel type result=40 05:09:50 Set A/D encoding result=40 05:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:50 Set channel filter=0.000000e+000 result=40 05:09:50 Config A/D Result=40 05:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:50 Get A/D filter: -9.255963e+061 result=40 05:09:50 Get A/D value=-858993460 result=40 05:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:09:50 Parameters OK 05:09:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:09:50 Set A/D data flow result=40 05:09:50 Set A/D channel type result=40 05:09:50 Set A/D encoding result=40 05:09:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:09:50 Set channel filter=0.000000e+000 result=40 05:09:50 Config A/D Result=40 05:09:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:09:50 Get A/D filter: -9.255963e+061 result=40 05:09:50 Get A/D value=-858993460 result=40 05:09:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:09:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:09:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:09:50 Aux= 05:09:50 Message to Camera, serial 1994 queued 05:09:53 Received message from Master: op=Shutter serial=1998 05:09:53 Shutter LASER close 05:09:53 Received message from Master: op=PointingHead serial=2002 05:09:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:09:53 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:09:53 Point started: ret=0 05:09:53 point_skyscan result=0 05:09:54 Check angles 05:09:54 SkyScan query 05:09:55 SkyScan query done: ret=0 az=90.165<-6011 ze=157.41<-1506 Statuses=0009 0009 05:09:55 Msec=0 True Az=90.165 Ze=157.41 Az status=0009 Ze status=0009 05:09:55 Check angles 05:09:55 SkyScan query 05:09:56 SkyScan query done: ret=0 az=72.345<-4823 ze=136.035<-2931 Statuses=0009 0009 05:09:56 Msec=750 True Az=72.345 Ze=136.035 Az status=0009 Ze status=0009 05:09:56 Check angles 05:09:56 SkyScan query 05:09:56 SkyScan query done: ret=0 az=54.765<-3651 ze=115.095<-4327 Statuses=0009 0009 05:09:56 Msec=1500 True Az=54.765 Ze=115.095 Az status=0009 Ze status=0009 05:09:57 Check angles 05:09:57 SkyScan query 05:09:57 SkyScan query done: ret=0 az=40.905<-2727 ze=94.125<-5725 Statuses=0009 0009 05:09:57 Msec=2250 True Az=40.905 Ze=94.125 Az status=0009 Ze status=0009 05:09:57 Check angles 05:09:57 SkyScan query 05:09:58 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 05:09:58 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 05:09:58 Check angles 05:09:58 SkyScan query 05:09:59 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 05:09:59 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 05:09:59 Check angles 05:09:59 SkyScan query 05:09:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:09:59 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:09:59 Message to Master queued w/err=0: serial=2002 error=0 05:10:04 Received message from Master: op=Filter serial=2003 05:10:04 Color wheel filter change from 0 to 0 05:10:04 FLIGetFilterPos err=0 currentPosition=0 05:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:04 Filter is already there-color wheel unchanged 05:10:05 Received message from Master: op=Shutter serial=2004 05:10:05 Shutter LASER close 05:10:05 Received message from Camera: op=State serial=2006 05:10:05 GetSingleValue result=40 Value=cccccccc 05:10:05 SkyScan query 05:10:05 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:05 Parameters OK 05:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:05 Set A/D data flow result=40 05:10:05 Set A/D channel type result=40 05:10:05 Set A/D encoding result=40 05:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:05 Set channel filter=0.000000e+000 result=40 05:10:05 Config A/D Result=40 05:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:05 Get A/D filter: -9.255963e+061 result=40 05:10:05 Get A/D value=-858993460 result=40 05:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:05 Parameters OK 05:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:05 Set A/D data flow result=40 05:10:05 Set A/D channel type result=40 05:10:05 Set A/D encoding result=40 05:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:05 Set channel filter=0.000000e+000 result=40 05:10:05 Config A/D Result=40 05:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:05 Get A/D filter: -9.255963e+061 result=40 05:10:05 Get A/D value=-858993460 result=40 05:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:05 Aux= 05:10:05 Message to Camera, serial 2006 queued 05:10:36 Received message from Master: op=PointingHead serial=2013 05:10:36 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:10:36 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:10:36 Point started: ret=0 05:10:36 point_skyscan result=0 05:10:37 Check angles 05:10:37 SkyScan query 05:10:38 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 05:10:38 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 05:10:38 Check angles 05:10:38 SkyScan query 05:10:39 SkyScan query done: ret=0 az=81.48<-5432 ze=66.51<-7566 Statuses=0009 0008 05:10:39 Msec=750 True Az=81.48 Ze=66.51 Az status=0009 Ze status=0008 05:10:39 Check angles 05:10:39 SkyScan query 05:10:39 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 05:10:39 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 05:10:39 Check angles 05:10:39 SkyScan query 05:10:40 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 05:10:40 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 05:10:40 Check angles 05:10:40 SkyScan query 05:10:41 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 05:10:41 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 05:10:41 Check angles 05:10:41 SkyScan query 05:10:42 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 05:10:42 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 05:10:42 Check angles 05:10:42 SkyScan query 05:10:42 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:10:42 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:10:42 Message to Master queued w/err=0: serial=2013 error=0 05:10:47 Received message from Master: op=Filter serial=2014 05:10:47 Color wheel filter change from 0 to 0 05:10:47 FLIGetFilterPos err=0 currentPosition=0 05:10:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:10:47 Filter is already there-color wheel unchanged 05:10:47 Received message from Master: op=Shutter serial=2015 05:10:47 Shutter LASER close 05:10:48 Received message from Camera: op=State serial=2017 05:10:48 GetSingleValue result=40 Value=cccccccc 05:10:48 SkyScan query 05:10:48 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:10:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:48 Parameters OK 05:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:48 Set A/D data flow result=40 05:10:48 Set A/D channel type result=40 05:10:48 Set A/D encoding result=40 05:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:48 Set channel filter=0.000000e+000 result=40 05:10:48 Config A/D Result=40 05:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:48 Get A/D filter: -9.255963e+061 result=40 05:10:48 Get A/D value=-858993460 result=40 05:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:10:48 Parameters OK 05:10:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:10:48 Set A/D data flow result=40 05:10:48 Set A/D channel type result=40 05:10:48 Set A/D encoding result=40 05:10:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:10:48 Set channel filter=0.000000e+000 result=40 05:10:48 Config A/D Result=40 05:10:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:10:48 Get A/D filter: -9.255963e+061 result=40 05:10:48 Get A/D value=-858993460 result=40 05:10:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:10:48 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:10:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:10:48 Aux= 05:10:48 Message to Camera, serial 2017 queued 05:11:19 Received message from Master: op=PointingHead serial=2024 05:11:19 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:11:19 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:11:19 Point started: ret=0 05:11:19 point_skyscan result=0 05:11:20 Check angles 05:11:20 SkyScan query 05:11:21 SkyScan query done: ret=0 az=134.745<-8983 ze=36.345<-9577 Statuses=0009 0009 05:11:21 Msec=0 True Az=134.745 Ze=36.345 Az status=0009 Ze status=0009 05:11:21 Check angles 05:11:21 SkyScan query 05:11:21 SkyScan query done: ret=0 az=116.85<-7790 ze=14.97<-11002 Statuses=0009 0009 05:11:21 Msec=750 True Az=116.85 Ze=14.97 Az status=0009 Ze status=0009 05:11:22 Check angles 05:11:22 SkyScan query 05:11:22 SkyScan query done: ret=0 az=99.45<-6630 ze=-6<-12400 Statuses=0009 0009 05:11:22 Msec=1500 True Az=99.45 Ze=-6 Az status=0009 Ze status=0009 05:11:22 Check angles 05:11:22 SkyScan query 05:11:23 SkyScan query done: ret=0 az=82.005<-5467 ze=-26.94<-13796 Statuses=0009 0009 05:11:23 Msec=2250 True Az=82.005 Ze=-26.94 Az status=0009 Ze status=0009 05:11:23 Check angles 05:11:23 SkyScan query 05:11:24 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.55<-14570 Statuses=0009 0008 05:11:24 Msec=3000 True Az=64.47 Ze=-38.55 Az status=0009 Ze status=0008 05:11:24 Check angles 05:11:24 SkyScan query 05:11:24 SkyScan query done: ret=0 az=47.055<-3137 ze=-38.535<-14569 Statuses=0009 0008 05:11:24 Msec=3750 True Az=47.055 Ze=-38.535 Az status=0009 Ze status=0008 05:11:25 Check angles 05:11:25 SkyScan query 05:11:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:11:25 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:11:25 Message to Master queued w/err=0: serial=2024 error=0 05:11:30 Received message from Master: op=Filter serial=2025 05:11:30 Color wheel filter change from 0 to 0 05:11:30 FLIGetFilterPos err=0 currentPosition=0 05:11:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:11:30 Filter is already there-color wheel unchanged 05:11:30 Received message from Master: op=Shutter serial=2026 05:11:30 Shutter LASER close 05:11:30 Received message from Camera: op=State serial=2028 05:11:30 GetSingleValue result=40 Value=cccccccc 05:11:30 SkyScan query 05:11:31 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:11:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:31 Parameters OK 05:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:31 Set A/D data flow result=40 05:11:31 Set A/D channel type result=40 05:11:31 Set A/D encoding result=40 05:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:31 Set channel filter=0.000000e+000 result=40 05:11:31 Config A/D Result=40 05:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:31 Get A/D filter: -9.255963e+061 result=40 05:11:31 Get A/D value=-858993460 result=40 05:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:11:31 Parameters OK 05:11:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:11:31 Set A/D data flow result=40 05:11:31 Set A/D channel type result=40 05:11:31 Set A/D encoding result=40 05:11:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:11:31 Set channel filter=0.000000e+000 result=40 05:11:31 Config A/D Result=40 05:11:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:11:31 Get A/D filter: -9.255963e+061 result=40 05:11:31 Get A/D value=-858993460 result=40 05:11:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:11:31 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:11:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:11:31 Aux= 05:11:31 Message to Camera, serial 2028 queued 05:12:02 Received message from Master: op=PointingHead serial=2035 05:12:02 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:12:02 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:12:02 Point started: ret=0 05:12:02 point_skyscan result=0 05:12:03 Check angles 05:12:03 SkyScan query 05:12:04 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.805<-16587 Statuses=0009 0009 05:12:04 Msec=0 True Az=64.245 Ze=-68.805 Az status=0009 Ze status=0009 05:12:04 Check angles 05:12:04 SkyScan query 05:12:04 SkyScan query done: ret=0 az=82.395<-5493 ze=-90.165<-18011 Statuses=0009 0009 05:12:04 Msec=750 True Az=82.395 Ze=-90.165 Az status=0009 Ze status=0009 05:12:05 Check angles 05:12:05 SkyScan query 05:12:05 SkyScan query done: ret=0 az=99.69<-6646 ze=-111.15<-19410 Statuses=0009 0009 05:12:05 Msec=1500 True Az=99.69 Ze=-111.15 Az status=0009 Ze status=0009 05:12:05 Check angles 05:12:05 SkyScan query 05:12:06 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.09<-20806 Statuses=0009 0009 05:12:06 Msec=2250 True Az=117.18 Ze=-132.09 Az status=0009 Ze status=0009 05:12:06 Check angles 05:12:06 SkyScan query 05:12:07 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 05:12:07 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 05:12:07 Check angles 05:12:07 SkyScan query 05:12:07 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:12:07 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:12:07 Message to Master queued w/err=0: serial=2035 error=0 [UTC 2018-12-4 05:12:09] 05:12:12 Received message from Master: op=Filter serial=2036 05:12:12 Color wheel filter change from 0 to 0 05:12:12 FLIGetFilterPos err=0 currentPosition=0 05:12:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:12 Filter is already there-color wheel unchanged 05:12:13 Received message from Master: op=Shutter serial=2037 05:12:13 Shutter LASER close 05:12:13 Received message from Camera: op=State serial=2039 05:12:13 GetSingleValue result=40 Value=cccccccc 05:12:13 SkyScan query 05:12:13 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:12:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:13 Parameters OK 05:12:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:13 Set A/D data flow result=40 05:12:13 Set A/D channel type result=40 05:12:13 Set A/D encoding result=40 05:12:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:13 Set channel filter=0.000000e+000 result=40 05:12:13 Config A/D Result=40 05:12:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:13 Get A/D filter: -9.255963e+061 result=40 05:12:13 Get A/D value=-858993460 result=40 05:12:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:13 Parameters OK 05:12:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:13 Set A/D data flow result=40 05:12:13 Set A/D channel type result=40 05:12:13 Set A/D encoding result=40 05:12:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:13 Set channel filter=0.000000e+000 result=40 05:12:13 Config A/D Result=40 05:12:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:13 Get A/D filter: -9.255963e+061 result=40 05:12:13 Get A/D value=-858993460 result=40 05:12:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:13 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:13 Aux= 05:12:13 Message to Camera, serial 2039 queued 05:12:44 Received message from Master: op=PointingHead serial=2046 05:12:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:12:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:12:44 Point started: ret=0 05:12:44 point_skyscan result=0 05:12:45 Check angles 05:12:45 SkyScan query 05:12:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 05:12:46 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 05:12:46 Check angles 05:12:46 SkyScan query 05:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:12:46 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:12:46 Message to Master queued w/err=0: serial=2046 error=0 05:12:51 Received message from Master: op=Filter serial=2047 05:12:51 Color wheel filter change from 0 to 0 05:12:51 FLIGetFilterPos err=0 currentPosition=0 05:12:51 FLIGetStepsRemaining err=0 RemainingSteps=0 05:12:51 Filter is already there-color wheel unchanged 05:12:52 Received message from Master: op=Shutter serial=2048 05:12:52 Shutter LASER open 05:12:52 Received message from Camera: op=State serial=2050 05:12:52 GetSingleValue result=40 Value=cccccccc 05:12:52 SkyScan query 05:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:12:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:52 Parameters OK 05:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:52 Set A/D data flow result=40 05:12:52 Set A/D channel type result=40 05:12:52 Set A/D encoding result=40 05:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:52 Set channel filter=0.000000e+000 result=40 05:12:52 Config A/D Result=40 05:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:52 Get A/D filter: -9.255963e+061 result=40 05:12:52 Get A/D value=-858993460 result=40 05:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:12:52 Parameters OK 05:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:12:52 Set A/D data flow result=40 05:12:52 Set A/D channel type result=40 05:12:52 Set A/D encoding result=40 05:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:12:52 Set channel filter=0.000000e+000 result=40 05:12:52 Config A/D Result=40 05:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:12:52 Get A/D filter: -9.255963e+061 result=40 05:12:52 Get A/D value=-858993460 result=40 05:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:12:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:12:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:12:52 Aux= 05:12:52 Message to Camera, serial 2050 queued 05:12:55 Received message from Master: op=Shutter serial=2054 05:12:55 Shutter LASER close 05:12:55 Received message from Master: op=PointingHead serial=2058 05:12:55 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:12:55 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:12:56 Point started: ret=0 05:12:56 point_skyscan result=0 05:12:56 Check angles 05:12:56 SkyScan query 05:12:57 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.22<-21548 Statuses=0009 0009 05:12:57 Msec=0 True Az=135.975 Ze=-143.22 Az status=0009 Ze status=0009 05:12:57 Check angles 05:12:57 SkyScan query 05:12:58 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.235<-20149 Statuses=0009 0009 05:12:58 Msec=750 True Az=153.585 Ze=-122.235 Az status=0009 Ze status=0009 05:12:58 Check angles 05:12:58 SkyScan query 05:12:59 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.325<-18755 Statuses=0009 0009 05:12:59 Msec=1500 True Az=170.94 Ze=-101.325 Az status=0009 Ze status=0009 05:12:59 Check angles 05:12:59 SkyScan query 05:12:59 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.37<-17358 Statuses=0008 0009 05:12:59 Msec=2250 True Az=176.025 Ze=-80.37 Az status=0008 Ze status=0009 05:12:59 Check angles 05:12:59 SkyScan query 05:13:00 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.4<-15960 Statuses=0008 0009 05:13:00 Msec=3000 True Az=176.01 Ze=-59.4 Az status=0008 Ze status=0009 05:13:00 Check angles 05:13:00 SkyScan query 05:13:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 05:13:01 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 05:13:01 Message to Master queued w/err=0: serial=2058 error=0 05:13:06 Received message from Master: op=Filter serial=2059 05:13:06 Color wheel filter change from 0 to 0 05:13:06 FLIGetFilterPos err=0 currentPosition=0 05:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:06 Filter is already there-color wheel unchanged 05:13:06 Received message from Master: op=Shutter serial=2060 05:13:06 Shutter LASER close 05:13:06 Received message from Camera: op=State serial=2062 05:13:06 GetSingleValue result=40 Value=cccccccc 05:13:06 SkyScan query 05:13:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:07 Parameters OK 05:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:07 Set A/D data flow result=40 05:13:07 Set A/D channel type result=40 05:13:07 Set A/D encoding result=40 05:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:07 Set channel filter=0.000000e+000 result=40 05:13:07 Config A/D Result=40 05:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:07 Get A/D filter: -9.255963e+061 result=40 05:13:07 Get A/D value=-858993460 result=40 05:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:07 Parameters OK 05:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:07 Set A/D data flow result=40 05:13:07 Set A/D channel type result=40 05:13:07 Set A/D encoding result=40 05:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:07 Set channel filter=0.000000e+000 result=40 05:13:07 Config A/D Result=40 05:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:07 Get A/D filter: -9.255963e+061 result=40 05:13:07 Get A/D value=-858993460 result=40 05:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:07 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:07 Aux= 05:13:07 Message to Camera, serial 2062 queued 05:13:38 Received message from Master: op=PointingHead serial=2069 05:13:38 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:13:38 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:13:38 Point started: ret=0 05:13:38 point_skyscan result=0 05:13:39 Check angles 05:13:39 SkyScan query 05:13:39 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.225<-13415 Statuses=0009 0009 05:13:39 Msec=0 True Az=152.565 Ze=-21.225 Az status=0009 Ze status=0009 05:13:40 Check angles 05:13:40 SkyScan query 05:13:40 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.285<-12019 Statuses=0009 0009 05:13:40 Msec=750 True Az=135.105 Ze=-0.285 Az status=0009 Ze status=0009 05:13:40 Check angles 05:13:40 SkyScan query 05:13:41 SkyScan query done: ret=0 az=117.24<-7816 ze=21.12<-10592 Statuses=0009 0009 05:13:41 Msec=1500 True Az=117.24 Ze=21.12 Az status=0009 Ze status=0009 05:13:41 Check angles 05:13:41 SkyScan query 05:13:42 SkyScan query done: ret=0 az=99.81<-6654 ze=42.075<-9195 Statuses=0009 0009 05:13:42 Msec=2250 True Az=99.81 Ze=42.075 Az status=0009 Ze status=0009 05:13:42 Check angles 05:13:42 SkyScan query 05:13:42 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:13:42 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:13:43 Check angles 05:13:43 SkyScan query 05:13:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:13:43 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 05:13:43 Message to Master queued w/err=0: serial=2069 error=0 05:13:48 Received message from Master: op=Filter serial=2070 05:13:48 Color wheel filter change from 0 to 0 05:13:48 FLIGetFilterPos err=0 currentPosition=0 05:13:48 FLIGetStepsRemaining err=0 RemainingSteps=0 05:13:48 Filter is already there-color wheel unchanged 05:13:48 Received message from Master: op=Shutter serial=2071 05:13:48 Shutter LASER close 05:13:48 Received message from Camera: op=State serial=2073 05:13:48 GetSingleValue result=40 Value=cccccccc 05:13:48 SkyScan query 05:13:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:13:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:49 Parameters OK 05:13:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:49 Set A/D data flow result=40 05:13:49 Set A/D channel type result=40 05:13:49 Set A/D encoding result=40 05:13:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:49 Set channel filter=0.000000e+000 result=40 05:13:49 Config A/D Result=40 05:13:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:49 Get A/D filter: -9.255963e+061 result=40 05:13:49 Get A/D value=-858993460 result=40 05:13:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:13:49 Parameters OK 05:13:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:13:49 Set A/D data flow result=40 05:13:49 Set A/D channel type result=40 05:13:49 Set A/D encoding result=40 05:13:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:13:49 Set channel filter=0.000000e+000 result=40 05:13:49 Config A/D Result=40 05:13:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:13:49 Get A/D filter: -9.255963e+061 result=40 05:13:49 Get A/D value=-858993460 result=40 05:13:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:13:49 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:13:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:13:49 Aux= 05:13:49 Message to Camera, serial 2073 queued 05:14:20 Received message from Master: op=PointingHead serial=2080 05:14:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:14:20 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:14:20 Point started: ret=0 05:14:20 point_skyscan result=0 05:14:21 Check angles 05:14:21 SkyScan query 05:14:21 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 05:14:21 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 05:14:22 Check angles 05:14:22 SkyScan query 05:14:22 SkyScan query done: ret=0 az=126.675<-8445 ze=38.505<-9433 Statuses=0009 0008 05:14:22 Msec=750 True Az=126.675 Ze=38.505 Az status=0009 Ze status=0008 05:14:22 Check angles 05:14:22 SkyScan query 05:14:23 SkyScan query done: ret=0 az=144.15<-9610 ze=38.505<-9433 Statuses=0009 0008 05:14:23 Msec=1500 True Az=144.15 Ze=38.505 Az status=0009 Ze status=0008 05:14:23 Check angles 05:14:23 SkyScan query 05:14:24 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 05:14:24 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 05:14:24 Check angles 05:14:24 SkyScan query 05:14:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:14:24 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:14:25 Check angles 05:14:25 SkyScan query 05:14:25 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:14:25 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:14:25 Message to Master queued w/err=0: serial=2080 error=0 05:14:30 Received message from Master: op=Filter serial=2081 05:14:30 Color wheel filter change from 0 to 0 05:14:30 FLIGetFilterPos err=0 currentPosition=0 05:14:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:14:30 Filter is already there-color wheel unchanged 05:14:30 Received message from Master: op=Shutter serial=2082 05:14:30 Shutter LASER close 05:14:30 Received message from Camera: op=State serial=2084 05:14:30 GetSingleValue result=40 Value=cccccccc 05:14:30 SkyScan query 05:14:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:31 Parameters OK 05:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:31 Set A/D data flow result=40 05:14:31 Set A/D channel type result=40 05:14:31 Set A/D encoding result=40 05:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:31 Set channel filter=0.000000e+000 result=40 05:14:31 Config A/D Result=40 05:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:31 Get A/D filter: -9.255963e+061 result=40 05:14:31 Get A/D value=-858993460 result=40 05:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:14:31 Parameters OK 05:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:14:31 Set A/D data flow result=40 05:14:31 Set A/D channel type result=40 05:14:31 Set A/D encoding result=40 05:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:14:31 Set channel filter=0.000000e+000 result=40 05:14:31 Config A/D Result=40 05:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:14:31 Get A/D filter: -9.255963e+061 result=40 05:14:31 Get A/D value=-858993460 result=40 05:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:14:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:14:31 Aux= 05:14:31 Message to Camera, serial 2084 queued 05:15:02 Received message from Master: op=PointingHead serial=2091 05:15:02 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:15:02 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:15:02 Point started: ret=0 05:15:02 point_skyscan result=0 05:15:03 Check angles 05:15:03 SkyScan query 05:15:03 SkyScan query done: ret=0 az=152.925<-10195 ze=8.67<-11422 Statuses=0009 0009 05:15:03 Msec=0 True Az=152.925 Ze=8.67 Az status=0009 Ze status=0009 05:15:04 Check angles 05:15:04 SkyScan query 05:15:04 SkyScan query done: ret=0 az=135.435<-9029 ze=-12.27<-12818 Statuses=0009 0009 05:15:04 Msec=750 True Az=135.435 Ze=-12.27 Az status=0009 Ze status=0009 05:15:04 Check angles 05:15:04 SkyScan query 05:15:05 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.225<-14215 Statuses=0009 0009 05:15:05 Msec=1500 True Az=117.975 Ze=-33.225 Az status=0009 Ze status=0009 05:15:05 Check angles 05:15:05 SkyScan query 05:15:06 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.525<-15435 Statuses=0009 0009 05:15:06 Msec=2250 True Az=100.575 Ze=-51.525 Az status=0009 Ze status=0009 05:15:06 Check angles 05:15:06 SkyScan query 05:15:06 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 05:15:06 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 05:15:07 Check angles 05:15:07 SkyScan query 05:15:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:15:07 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:15:07 Message to Master queued w/err=0: serial=2091 error=0 05:15:12 Received message from Master: op=Filter serial=2092 05:15:12 Color wheel filter change from 0 to 0 05:15:12 FLIGetFilterPos err=0 currentPosition=0 05:15:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:12 Filter is already there-color wheel unchanged 05:15:12 Received message from Master: op=Shutter serial=2093 05:15:12 Shutter LASER close 05:15:12 Received message from Camera: op=State serial=2095 05:15:12 GetSingleValue result=40 Value=cccccccc 05:15:12 SkyScan query 05:15:13 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:15:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:13 Parameters OK 05:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:13 Set A/D data flow result=40 05:15:13 Set A/D channel type result=40 05:15:13 Set A/D encoding result=40 05:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:13 Set channel filter=0.000000e+000 result=40 05:15:13 Config A/D Result=40 05:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:13 Get A/D filter: -9.255963e+061 result=40 05:15:13 Get A/D value=-858993460 result=40 05:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:13 Parameters OK 05:15:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:13 Set A/D data flow result=40 05:15:13 Set A/D channel type result=40 05:15:13 Set A/D encoding result=40 05:15:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:13 Set channel filter=0.000000e+000 result=40 05:15:13 Config A/D Result=40 05:15:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:13 Get A/D filter: -9.255963e+061 result=40 05:15:13 Get A/D value=-858993460 result=40 05:15:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:13 Aux= 05:15:13 Message to Camera, serial 2095 queued 05:15:44 Received message from Master: op=PointingHead serial=2102 05:15:44 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:15:44 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:15:44 Point started: ret=0 05:15:44 point_skyscan result=0 05:15:45 Check angles 05:15:45 SkyScan query 05:15:46 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.465<-17431 Statuses=0009 0009 05:15:46 Msec=0 True Az=109.17 Ze=-81.465 Az status=0009 Ze status=0009 05:15:46 Check angles 05:15:46 SkyScan query 05:15:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.42<-18828 Statuses=0008 0009 05:15:46 Msec=750 True Az=113.01 Ze=-102.42 Az status=0008 Ze status=0009 05:15:46 Check angles 05:15:46 SkyScan query 05:15:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 05:15:47 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 05:15:47 Check angles 05:15:47 SkyScan query 05:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 05:15:48 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 05:15:48 Check angles 05:15:48 SkyScan query 05:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 05:15:49 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 05:15:49 Check angles 05:15:49 SkyScan query 05:15:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:15:49 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:15:49 Message to Master queued w/err=0: serial=2102 error=0 05:15:54 Received message from Master: op=Filter serial=2103 05:15:54 Color wheel filter change from 0 to 0 05:15:54 FLIGetFilterPos err=0 currentPosition=0 05:15:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:15:54 Filter is already there-color wheel unchanged 05:15:54 Received message from Master: op=Shutter serial=2104 05:15:54 Shutter LASER open 05:15:55 Received message from Camera: op=State serial=2106 05:15:55 GetSingleValue result=40 Value=cccccccc 05:15:55 SkyScan query 05:15:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:15:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:55 Parameters OK 05:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:55 Set A/D data flow result=40 05:15:55 Set A/D channel type result=40 05:15:55 Set A/D encoding result=40 05:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:55 Set channel filter=0.000000e+000 result=40 05:15:55 Config A/D Result=40 05:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:55 Get A/D filter: -9.255963e+061 result=40 05:15:55 Get A/D value=-858993460 result=40 05:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:15:55 Parameters OK 05:15:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:15:55 Set A/D data flow result=40 05:15:55 Set A/D channel type result=40 05:15:55 Set A/D encoding result=40 05:15:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:15:55 Set channel filter=0.000000e+000 result=40 05:15:55 Config A/D Result=40 05:15:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:15:55 Get A/D filter: -9.255963e+061 result=40 05:15:55 Get A/D value=-858993460 result=40 05:15:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:15:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:15:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:15:55 Aux= 05:15:55 Message to Camera, serial 2106 queued 05:15:58 Received message from Master: op=Shutter serial=2110 05:15:58 Shutter LASER close 05:15:58 Received message from Master: op=PointingHead serial=2114 05:15:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:15:58 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:15:58 Point started: ret=0 05:15:58 point_skyscan result=0 05:15:59 Check angles 05:15:59 SkyScan query 05:16:00 SkyScan query done: ret=0 az=89.91<-5994 ze=157.335<-1511 Statuses=0009 0009 05:16:00 Msec=0 True Az=89.91 Ze=157.335 Az status=0009 Ze status=0009 05:16:00 Check angles 05:16:00 SkyScan query 05:16:01 SkyScan query done: ret=0 az=72.675<-4845 ze=136.38<-2908 Statuses=0009 0009 05:16:01 Msec=750 True Az=72.675 Ze=136.38 Az status=0009 Ze status=0009 05:16:01 Check angles 05:16:01 SkyScan query 05:16:01 SkyScan query done: ret=0 az=55.02<-3668 ze=115.425<-4305 Statuses=0009 0009 05:16:01 Msec=1500 True Az=55.02 Ze=115.425 Az status=0009 Ze status=0009 05:16:01 Check angles 05:16:01 SkyScan query 05:16:02 SkyScan query done: ret=0 az=40.86<-2724 ze=94.47<-5702 Statuses=0009 0009 05:16:02 Msec=2250 True Az=40.86 Ze=94.47 Az status=0009 Ze status=0009 05:16:02 Check angles 05:16:02 SkyScan query 05:16:03 SkyScan query done: ret=0 az=40.995<-2733 ze=73.53<-7098 Statuses=0008 0009 05:16:03 Msec=3000 True Az=40.995 Ze=73.53 Az status=0008 Ze status=0009 05:16:03 Check angles 05:16:03 SkyScan query 05:16:04 SkyScan query done: ret=0 az=40.995<-2733 ze=52.905<-8473 Statuses=0008 0009 05:16:04 Msec=3750 True Az=40.995 Ze=52.905 Az status=0008 Ze status=0009 05:16:04 Check angles 05:16:04 SkyScan query 05:16:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:16:04 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:16:04 Message to Master queued w/err=0: serial=2114 error=0 05:16:09 Received message from Master: op=Filter serial=2115 05:16:09 Color wheel filter change from 0 to 0 05:16:09 FLIGetFilterPos err=0 currentPosition=0 05:16:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:09 Filter is already there-color wheel unchanged 05:16:09 Received message from Master: op=Shutter serial=2116 05:16:09 Shutter LASER close 05:16:10 Received message from Camera: op=State serial=2118 05:16:10 GetSingleValue result=40 Value=cccccccc 05:16:10 SkyScan query 05:16:10 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:16:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:10 Parameters OK 05:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:10 Set A/D data flow result=40 05:16:10 Set A/D channel type result=40 05:16:10 Set A/D encoding result=40 05:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:10 Set channel filter=0.000000e+000 result=40 05:16:10 Config A/D Result=40 05:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:10 Get A/D filter: -9.255963e+061 result=40 05:16:10 Get A/D value=-858993460 result=40 05:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:10 Parameters OK 05:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:10 Set A/D data flow result=40 05:16:10 Set A/D channel type result=40 05:16:10 Set A/D encoding result=40 05:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:10 Set channel filter=0.000000e+000 result=40 05:16:10 Config A/D Result=40 05:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:10 Get A/D filter: -9.255963e+061 result=40 05:16:10 Get A/D value=-858993460 result=40 05:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:10 Aux= 05:16:10 Message to Camera, serial 2118 queued 05:16:41 Received message from Master: op=PointingHead serial=2125 05:16:41 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:16:41 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:16:41 Point started: ret=0 05:16:41 point_skyscan result=0 05:16:42 Check angles 05:16:42 SkyScan query 05:16:43 SkyScan query done: ret=0 az=63.96<-4264 ze=66.54<-7564 Statuses=0009 0008 05:16:43 Msec=0 True Az=63.96 Ze=66.54 Az status=0009 Ze status=0008 05:16:43 Check angles 05:16:43 SkyScan query 05:16:44 SkyScan query done: ret=0 az=81.96<-5464 ze=66.51<-7566 Statuses=0009 0008 05:16:44 Msec=750 True Az=81.96 Ze=66.51 Az status=0009 Ze status=0008 05:16:44 Check angles 05:16:44 SkyScan query 05:16:44 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 05:16:44 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 05:16:45 Check angles 05:16:45 SkyScan query 05:16:45 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 05:16:45 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 05:16:45 Check angles 05:16:45 SkyScan query 05:16:46 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 05:16:46 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 05:16:46 Check angles 05:16:46 SkyScan query 05:16:47 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 05:16:47 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 05:16:47 Check angles 05:16:47 SkyScan query 05:16:47 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 05:16:47 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 05:16:47 Message to Master queued w/err=0: serial=2125 error=0 05:16:52 Received message from Master: op=Filter serial=2126 05:16:52 Color wheel filter change from 0 to 0 05:16:52 FLIGetFilterPos err=0 currentPosition=0 05:16:52 FLIGetStepsRemaining err=0 RemainingSteps=0 05:16:52 Filter is already there-color wheel unchanged 05:16:53 Received message from Master: op=Shutter serial=2127 05:16:53 Shutter LASER close 05:16:53 Received message from Camera: op=State serial=2129 05:16:53 GetSingleValue result=40 Value=cccccccc 05:16:53 SkyScan query 05:16:53 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:16:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:53 Parameters OK 05:16:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:53 Set A/D data flow result=40 05:16:53 Set A/D channel type result=40 05:16:53 Set A/D encoding result=40 05:16:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:53 Set channel filter=0.000000e+000 result=40 05:16:53 Config A/D Result=40 05:16:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:53 Get A/D filter: -9.255963e+061 result=40 05:16:53 Get A/D value=-858993460 result=40 05:16:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:16:53 Parameters OK 05:16:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:16:53 Set A/D data flow result=40 05:16:53 Set A/D channel type result=40 05:16:53 Set A/D encoding result=40 05:16:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:16:53 Set channel filter=0.000000e+000 result=40 05:16:53 Config A/D Result=40 05:16:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:16:53 Get A/D filter: -9.255963e+061 result=40 05:16:53 Get A/D value=-858993460 result=40 05:16:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:16:53 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:16:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:16:53 Aux= 05:16:53 Message to Camera, serial 2129 queued 05:17:24 Received message from Master: op=PointingHead serial=2136 05:17:24 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:17:24 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:17:24 Point started: ret=0 05:17:24 point_skyscan result=0 05:17:25 Check angles 05:17:25 SkyScan query 05:17:26 SkyScan query done: ret=0 az=135.15<-9010 ze=36.84<-9544 Statuses=0009 0009 05:17:26 Msec=0 True Az=135.15 Ze=36.84 Az status=0009 Ze status=0009 05:17:26 Check angles 05:17:26 SkyScan query 05:17:26 SkyScan query done: ret=0 az=117.615<-7841 ze=15.915<-10939 Statuses=0009 0009 05:17:26 Msec=750 True Az=117.615 Ze=15.915 Az status=0009 Ze status=0009 05:17:27 Check angles 05:17:27 SkyScan query 05:17:27 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.07<-12338 Statuses=0009 0009 05:17:27 Msec=1500 True Az=100.215 Ze=-5.07 Az status=0009 Ze status=0009 05:17:27 Check angles 05:17:27 SkyScan query 05:17:28 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.025<-13735 Statuses=0009 0009 05:17:28 Msec=2250 True Az=82.725 Ze=-26.025 Az status=0009 Ze status=0009 05:17:28 Check angles 05:17:28 SkyScan query 05:17:29 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.565<-14571 Statuses=0009 0008 05:17:29 Msec=3000 True Az=65.235 Ze=-38.565 Az status=0009 Ze status=0008 05:17:29 Check angles 05:17:29 SkyScan query 05:17:29 SkyScan query done: ret=0 az=47.805<-3187 ze=-38.535<-14569 Statuses=0009 0008 05:17:29 Msec=3750 True Az=47.805 Ze=-38.535 Az status=0009 Ze status=0008 05:17:30 Check angles 05:17:30 SkyScan query 05:17:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:17:30 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:17:30 Message to Master queued w/err=0: serial=2136 error=0 05:17:35 Received message from Master: op=Filter serial=2137 05:17:35 Color wheel filter change from 0 to 0 05:17:35 FLIGetFilterPos err=0 currentPosition=0 05:17:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:17:35 Filter is already there-color wheel unchanged 05:17:35 Received message from Master: op=Shutter serial=2138 05:17:35 Shutter LASER close 05:17:35 Received message from Camera: op=State serial=2140 05:17:35 GetSingleValue result=40 Value=cccccccc 05:17:35 SkyScan query 05:17:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:17:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:36 Parameters OK 05:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:36 Set A/D data flow result=40 05:17:36 Set A/D channel type result=40 05:17:36 Set A/D encoding result=40 05:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:36 Set channel filter=0.000000e+000 result=40 05:17:36 Config A/D Result=40 05:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:36 Get A/D filter: -9.255963e+061 result=40 05:17:36 Get A/D value=-858993460 result=40 05:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:17:36 Parameters OK 05:17:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:17:36 Set A/D data flow result=40 05:17:36 Set A/D channel type result=40 05:17:36 Set A/D encoding result=40 05:17:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:17:36 Set channel filter=0.000000e+000 result=40 05:17:36 Config A/D Result=40 05:17:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:17:36 Get A/D filter: -9.255963e+061 result=40 05:17:36 Get A/D value=-858993460 result=40 05:17:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:17:36 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:17:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:17:36 Aux= 05:17:36 Message to Camera, serial 2140 queued 05:18:07 Received message from Master: op=PointingHead serial=2147 05:18:07 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:18:07 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:18:07 Point started: ret=0 05:18:07 point_skyscan result=0 05:18:08 Check angles 05:18:08 SkyScan query 05:18:09 SkyScan query done: ret=0 az=64.365<-4291 ze=-68.85<-16590 Statuses=0009 0009 05:18:09 Msec=0 True Az=64.365 Ze=-68.85 Az status=0009 Ze status=0009 05:18:09 Check angles 05:18:09 SkyScan query 05:18:09 SkyScan query done: ret=0 az=82.395<-5493 ze=-90.24<-18016 Statuses=0009 0009 05:18:09 Msec=750 True Az=82.395 Ze=-90.24 Az status=0009 Ze status=0009 05:18:09 Check angles 05:18:09 SkyScan query 05:18:10 SkyScan query done: ret=0 az=99.69<-6646 ze=-111.195<-19413 Statuses=0009 0009 05:18:10 Msec=1500 True Az=99.69 Ze=-111.195 Az status=0009 Ze status=0009 05:18:10 Check angles 05:18:10 SkyScan query 05:18:11 SkyScan query done: ret=0 az=117.15<-7810 ze=-132.15<-20810 Statuses=0009 0009 05:18:11 Msec=2250 True Az=117.15 Ze=-132.15 Az status=0009 Ze status=0009 05:18:11 Check angles 05:18:11 SkyScan query 05:18:12 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 05:18:12 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 05:18:12 Check angles 05:18:12 SkyScan query 05:18:12 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:18:12 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:18:12 Message to Master queued w/err=0: serial=2147 error=0 05:18:17 Received message from Master: op=Filter serial=2148 05:18:17 Color wheel filter change from 0 to 0 05:18:17 FLIGetFilterPos err=0 currentPosition=0 05:18:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:17 Filter is already there-color wheel unchanged 05:18:17 Received message from Master: op=Shutter serial=2149 05:18:17 Shutter LASER close 05:18:17 Received message from Camera: op=State serial=2151 05:18:17 GetSingleValue result=40 Value=cccccccc 05:18:17 SkyScan query 05:18:18 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:18:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:18 Parameters OK 05:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:18 Set A/D data flow result=40 05:18:18 Set A/D channel type result=40 05:18:18 Set A/D encoding result=40 05:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:18 Set channel filter=0.000000e+000 result=40 05:18:18 Config A/D Result=40 05:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:18 Get A/D filter: -9.255963e+061 result=40 05:18:18 Get A/D value=-858993460 result=40 05:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:18 Parameters OK 05:18:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:18 Set A/D data flow result=40 05:18:18 Set A/D channel type result=40 05:18:18 Set A/D encoding result=40 05:18:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:18 Set channel filter=0.000000e+000 result=40 05:18:18 Config A/D Result=40 05:18:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:18 Get A/D filter: -9.255963e+061 result=40 05:18:18 Get A/D value=-858993460 result=40 05:18:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:18 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:18 Aux= 05:18:18 Message to Camera, serial 2151 queued 05:18:49 Received message from Master: op=PointingHead serial=2158 05:18:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:18:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:18:49 Point started: ret=0 05:18:49 point_skyscan result=0 05:18:50 Check angles 05:18:50 SkyScan query 05:18:51 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 05:18:51 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 05:18:51 Check angles 05:18:51 SkyScan query 05:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:18:51 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:18:51 Message to Master queued w/err=0: serial=2158 error=0 05:18:56 Received message from Master: op=Filter serial=2159 05:18:56 Color wheel filter change from 0 to 0 05:18:56 FLIGetFilterPos err=0 currentPosition=0 05:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 05:18:56 Filter is already there-color wheel unchanged 05:18:57 Received message from Master: op=Shutter serial=2160 05:18:57 Shutter LASER open 05:18:57 Received message from Camera: op=State serial=2162 05:18:57 GetSingleValue result=40 Value=cccccccc 05:18:57 SkyScan query 05:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:57 Parameters OK 05:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:57 Set A/D data flow result=40 05:18:57 Set A/D channel type result=40 05:18:57 Set A/D encoding result=40 05:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:57 Set channel filter=0.000000e+000 result=40 05:18:57 Config A/D Result=40 05:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:57 Get A/D filter: -9.255963e+061 result=40 05:18:57 Get A/D value=-858993460 result=40 05:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:18:57 Parameters OK 05:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:18:57 Set A/D data flow result=40 05:18:57 Set A/D channel type result=40 05:18:57 Set A/D encoding result=40 05:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:18:57 Set channel filter=0.000000e+000 result=40 05:18:57 Config A/D Result=40 05:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:18:57 Get A/D filter: -9.255963e+061 result=40 05:18:57 Get A/D value=-858993460 result=40 05:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:18:57 Aux= 05:18:57 Message to Camera, serial 2162 queued 05:19:00 Received message from Master: op=Shutter serial=2166 05:19:00 Shutter LASER close 05:19:00 Received message from Master: op=PointingHead serial=2170 05:19:00 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:19:00 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:19:01 Point started: ret=0 05:19:01 point_skyscan result=0 05:19:01 Check angles 05:19:01 SkyScan query 05:19:02 SkyScan query done: ret=0 az=136.065<-9071 ze=-143.19<-21546 Statuses=0009 0009 05:19:02 Msec=0 True Az=136.065 Ze=-143.19 Az status=0009 Ze status=0009 05:19:02 Check angles 05:19:02 SkyScan query 05:19:03 SkyScan query done: ret=0 az=153.96<-10264 ze=-121.8<-20120 Statuses=0009 0009 05:19:03 Msec=750 True Az=153.96 Ze=-121.8 Az status=0009 Ze status=0009 05:19:03 Check angles 05:19:03 SkyScan query 05:19:03 SkyScan query done: ret=0 az=171.315<-11421 ze=-100.86<-18724 Statuses=0009 0009 05:19:03 Msec=1500 True Az=171.315 Ze=-100.86 Az status=0009 Ze status=0009 05:19:04 Check angles 05:19:04 SkyScan query 05:19:04 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 05:19:04 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 05:19:04 Check angles 05:19:04 SkyScan query 05:19:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 05:19:05 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 05:19:05 Check angles 05:19:05 SkyScan query 05:19:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:19:06 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:19:06 Message to Master queued w/err=0: serial=2170 error=0 05:19:11 Received message from Master: op=Filter serial=2171 05:19:11 Color wheel filter change from 0 to 0 05:19:11 FLIGetFilterPos err=0 currentPosition=0 05:19:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:11 Filter is already there-color wheel unchanged 05:19:11 Received message from Master: op=Shutter serial=2172 05:19:11 Shutter LASER close 05:19:11 Received message from Camera: op=State serial=2174 05:19:11 GetSingleValue result=40 Value=cccccccc 05:19:11 SkyScan query 05:19:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:12 Parameters OK 05:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:12 Set A/D data flow result=40 05:19:12 Set A/D channel type result=40 05:19:12 Set A/D encoding result=40 05:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:12 Set channel filter=0.000000e+000 result=40 05:19:12 Config A/D Result=40 05:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:12 Get A/D filter: -9.255963e+061 result=40 05:19:12 Get A/D value=-858993460 result=40 05:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:12 Parameters OK 05:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:12 Set A/D data flow result=40 05:19:12 Set A/D channel type result=40 05:19:12 Set A/D encoding result=40 05:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:12 Set channel filter=0.000000e+000 result=40 05:19:12 Config A/D Result=40 05:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:12 Get A/D filter: -9.255963e+061 result=40 05:19:12 Get A/D value=-858993460 result=40 05:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:12 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:12 Aux= 05:19:12 Message to Camera, serial 2174 queued 05:19:42 Received message from Master: op=PointingHead serial=2181 05:19:42 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:19:42 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:19:43 Point started: ret=0 05:19:43 point_skyscan result=0 05:19:44 Check angles 05:19:44 SkyScan query 05:19:44 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.33<-13422 Statuses=0009 0009 05:19:44 Msec=0 True Az=152.61 Ze=-21.33 Az status=0009 Ze status=0009 05:19:44 Check angles 05:19:44 SkyScan query 05:19:45 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.345<-12023 Statuses=0009 0009 05:19:45 Msec=750 True Az=135.24 Ze=-0.345 Az status=0009 Ze status=0009 05:19:45 Check angles 05:19:45 SkyScan query 05:19:46 SkyScan query done: ret=0 az=117.63<-7842 ze=20.595<-10627 Statuses=0009 0009 05:19:46 Msec=1500 True Az=117.63 Ze=20.595 Az status=0009 Ze status=0009 05:19:46 Check angles 05:19:46 SkyScan query 05:19:46 SkyScan query done: ret=0 az=100.23<-6682 ze=41.565<-9229 Statuses=0009 0009 05:19:46 Msec=2250 True Az=100.23 Ze=41.565 Az status=0009 Ze status=0009 05:19:47 Check angles 05:19:47 SkyScan query 05:19:47 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:19:47 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:19:47 Check angles 05:19:47 SkyScan query 05:19:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:19:48 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:19:48 Message to Master queued w/err=0: serial=2181 error=0 05:19:53 Received message from Master: op=Filter serial=2182 05:19:53 Color wheel filter change from 0 to 0 05:19:53 FLIGetFilterPos err=0 currentPosition=0 05:19:53 FLIGetStepsRemaining err=0 RemainingSteps=0 05:19:53 Filter is already there-color wheel unchanged 05:19:53 Received message from Master: op=Shutter serial=2183 05:19:53 Shutter LASER close 05:19:53 Received message from Camera: op=State serial=2185 05:19:53 GetSingleValue result=40 Value=cccccccc 05:19:53 SkyScan query 05:19:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:19:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:54 Parameters OK 05:19:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:54 Set A/D data flow result=40 05:19:54 Set A/D channel type result=40 05:19:54 Set A/D encoding result=40 05:19:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:54 Set channel filter=0.000000e+000 result=40 05:19:54 Config A/D Result=40 05:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:54 Get A/D filter: -9.255963e+061 result=40 05:19:54 Get A/D value=-858993460 result=40 05:19:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:19:54 Parameters OK 05:19:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:19:54 Set A/D data flow result=40 05:19:54 Set A/D channel type result=40 05:19:54 Set A/D encoding result=40 05:19:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:19:54 Set channel filter=0.000000e+000 result=40 05:19:54 Config A/D Result=40 05:19:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:19:54 Get A/D filter: -9.255963e+061 result=40 05:19:54 Get A/D value=-858993460 result=40 05:19:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:19:54 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:19:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:19:54 Aux= 05:19:54 Message to Camera, serial 2185 queued 05:20:25 Received message from Master: op=PointingHead serial=2192 05:20:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:20:25 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:20:25 Point started: ret=0 05:20:25 point_skyscan result=0 05:20:26 Check angles 05:20:26 SkyScan query 05:20:26 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 05:20:26 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 05:20:26 Check angles 05:20:26 SkyScan query 05:20:27 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 05:20:27 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 05:20:27 Check angles 05:20:27 SkyScan query 05:20:28 SkyScan query done: ret=0 az=144.57<-9638 ze=38.505<-9433 Statuses=0009 0008 05:20:28 Msec=1500 True Az=144.57 Ze=38.505 Az status=0009 Ze status=0008 05:20:28 Check angles 05:20:28 SkyScan query 05:20:29 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 05:20:29 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 05:20:29 Check angles 05:20:29 SkyScan query 05:20:29 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:20:29 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:20:29 Check angles 05:20:29 SkyScan query 05:20:30 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:20:30 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:20:30 Message to Master queued w/err=0: serial=2192 error=0 05:20:35 Received message from Master: op=Filter serial=2193 05:20:35 Color wheel filter change from 0 to 0 05:20:35 FLIGetFilterPos err=0 currentPosition=0 05:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:20:35 Filter is already there-color wheel unchanged 05:20:35 Received message from Master: op=Shutter serial=2194 05:20:35 Shutter LASER close 05:20:35 Received message from Camera: op=State serial=2196 05:20:35 GetSingleValue result=40 Value=cccccccc 05:20:35 SkyScan query 05:20:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:36 Parameters OK 05:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:36 Set A/D data flow result=40 05:20:36 Set A/D channel type result=40 05:20:36 Set A/D encoding result=40 05:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:36 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-4 05:20:36] 05:20:36 Config A/D Result=40 05:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:36 Get A/D filter: -9.255963e+061 result=40 05:20:36 Get A/D value=-858993460 result=40 05:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:20:36 Parameters OK 05:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:20:36 Set A/D data flow result=40 05:20:36 Set A/D channel type result=40 05:20:36 Set A/D encoding result=40 05:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:20:36 Set channel filter=0.000000e+000 result=40 05:20:36 Config A/D Result=40 05:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:20:36 Get A/D filter: -9.255963e+061 result=40 05:20:36 Get A/D value=-858993460 result=40 05:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:20:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:20:36 Aux= 05:20:36 Message to Camera, serial 2196 queued 05:21:07 Received message from Master: op=PointingHead serial=2203 05:21:07 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:21:07 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:21:07 Point started: ret=0 05:21:07 point_skyscan result=0 05:21:08 Check angles 05:21:08 SkyScan query 05:21:08 SkyScan query done: ret=0 az=152.595<-10173 ze=8.175<-11455 Statuses=0009 0009 05:21:08 Msec=0 True Az=152.595 Ze=8.175 Az status=0009 Ze status=0009 05:21:09 Check angles 05:21:09 SkyScan query 05:21:09 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.75<-12850 Statuses=0009 0009 05:21:09 Msec=750 True Az=135.165 Ze=-12.75 Az status=0009 Ze status=0009 05:21:09 Check angles 05:21:09 SkyScan query 05:21:10 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.705<-14247 Statuses=0009 0009 05:21:10 Msec=1500 True Az=117.585 Ze=-33.705 Az status=0009 Ze status=0009 05:21:10 Check angles 05:21:10 SkyScan query 05:21:11 SkyScan query done: ret=0 az=99.765<-6651 ze=-51.555<-15437 Statuses=0009 0009 05:21:11 Msec=2250 True Az=99.765 Ze=-51.555 Az status=0009 Ze status=0009 05:21:11 Check angles 05:21:11 SkyScan query 05:21:11 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:21:11 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:21:12 Check angles 05:21:12 SkyScan query 05:21:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:21:12 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:21:12 Message to Master queued w/err=0: serial=2203 error=0 05:21:17 Received message from Master: op=Filter serial=2204 05:21:17 Color wheel filter change from 0 to 0 05:21:17 FLIGetFilterPos err=0 currentPosition=0 05:21:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:17 Filter is already there-color wheel unchanged 05:21:17 Received message from Master: op=Shutter serial=2205 05:21:17 Shutter LASER close 05:21:17 Received message from Camera: op=State serial=2207 05:21:17 GetSingleValue result=40 Value=cccccccc 05:21:17 SkyScan query 05:21:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:21:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:18 Parameters OK 05:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:18 Set A/D data flow result=40 05:21:18 Set A/D channel type result=40 05:21:18 Set A/D encoding result=40 05:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:18 Set channel filter=0.000000e+000 result=40 05:21:18 Config A/D Result=40 05:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:18 Get A/D filter: -9.255963e+061 result=40 05:21:18 Get A/D value=-858993460 result=40 05:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:21:18 Parameters OK 05:21:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:21:18 Set A/D data flow result=40 05:21:18 Set A/D channel type result=40 05:21:18 Set A/D encoding result=40 05:21:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:21:18 Set channel filter=0.000000e+000 result=40 05:21:18 Config A/D Result=40 05:21:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:21:18 Get A/D filter: -9.255963e+061 result=40 05:21:18 Get A/D value=-858993460 result=40 05:21:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:21:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:21:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:21:18 Aux= 05:21:18 Message to Camera, serial 2207 queued 05:21:49 Received message from Master: op=Identify serial=2213 05:21:49 Received message from Master: op=PointingHead serial=2217 05:21:49 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:21:49 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:21:49 Point started: ret=0 05:21:49 point_skyscan result=0 05:21:50 Check angles 05:21:50 SkyScan query 05:21:50 SkyScan query done: ret=0 az=108.735<-7249 ze=-80.985<-17399 Statuses=0009 0009 05:21:50 Msec=0 True Az=108.735 Ze=-80.985 Az status=0009 Ze status=0009 05:21:51 Check angles 05:21:51 SkyScan query 05:21:51 SkyScan query done: ret=0 az=113.01<-7534 ze=-101.925<-18795 Statuses=0008 0009 05:21:51 Msec=750 True Az=113.01 Ze=-101.925 Az status=0008 Ze status=0009 05:21:51 Check angles 05:21:51 SkyScan query 05:21:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-122.88<-20192 Statuses=0008 0009 05:21:52 Msec=1500 True Az=113.01 Ze=-122.88 Az status=0008 Ze status=0009 05:21:52 Check angles 05:21:52 SkyScan query 05:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.835<-21589 Statuses=0008 0009 05:21:53 Msec=2250 True Az=112.995 Ze=-143.835 Az status=0008 Ze status=0009 05:21:53 Check angles 05:21:53 SkyScan query 05:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.79<-22986 Statuses=0008 0009 05:21:53 Msec=3000 True Az=112.995 Ze=-164.79 Az status=0008 Ze status=0009 05:21:54 Check angles 05:21:54 SkyScan query 05:21:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:21:54 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:21:54 Message to Master queued w/err=0: serial=2217 error=0 05:21:59 Received message from Master: op=Filter serial=2218 05:21:59 Color wheel filter change from 0 to 0 05:21:59 FLIGetFilterPos err=0 currentPosition=0 05:21:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:21:59 Filter is already there-color wheel unchanged 05:21:59 Received message from Master: op=Shutter serial=2219 05:21:59 Shutter LASER open 05:22:00 Received message from Camera: op=State serial=2221 05:22:00 GetSingleValue result=40 Value=cccccccc 05:22:00 SkyScan query 05:22:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:22:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:00 Parameters OK 05:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:00 Set A/D data flow result=40 05:22:00 Set A/D channel type result=40 05:22:00 Set A/D encoding result=40 05:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:00 Set channel filter=0.000000e+000 result=40 05:22:00 Config A/D Result=40 05:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:00 Get A/D filter: -9.255963e+061 result=40 05:22:00 Get A/D value=-858993460 result=40 05:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:00 Parameters OK 05:22:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:00 Set A/D data flow result=40 05:22:00 Set A/D channel type result=40 05:22:00 Set A/D encoding result=40 05:22:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:00 Set channel filter=0.000000e+000 result=40 05:22:00 Config A/D Result=40 05:22:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:00 Get A/D filter: -9.255963e+061 result=40 05:22:00 Get A/D value=-858993460 result=40 05:22:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:00 Aux= 05:22:00 Message to Camera, serial 2221 queued 05:22:03 Received message from Master: op=Shutter serial=2225 05:22:03 Shutter LASER close 05:22:03 Received message from Master: op=PointingHead serial=2229 05:22:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:22:03 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:22:03 Point started: ret=0 05:22:03 point_skyscan result=0 05:22:04 Check angles 05:22:04 SkyScan query 05:22:05 SkyScan query done: ret=0 az=89.88<-5992 ze=157.185<-1521 Statuses=0009 0009 05:22:05 Msec=0 True Az=89.88 Ze=157.185 Az status=0009 Ze status=0009 05:22:05 Check angles 05:22:05 SkyScan query 05:22:05 SkyScan query done: ret=0 az=72.465<-4831 ze=136.23<-2918 Statuses=0009 0009 05:22:05 Msec=750 True Az=72.465 Ze=136.23 Az status=0009 Ze status=0009 05:22:06 Check angles 05:22:06 SkyScan query 05:22:06 SkyScan query done: ret=0 az=54.9<-3660 ze=115.275<-4315 Statuses=0009 0009 05:22:06 Msec=1500 True Az=54.9 Ze=115.275 Az status=0009 Ze status=0009 05:22:06 Check angles 05:22:06 SkyScan query 05:22:07 SkyScan query done: ret=0 az=40.905<-2727 ze=94.335<-5711 Statuses=0009 0009 05:22:07 Msec=2250 True Az=40.905 Ze=94.335 Az status=0009 Ze status=0009 05:22:07 Check angles 05:22:07 SkyScan query 05:22:08 SkyScan query done: ret=0 az=41.01<-2734 ze=73.365<-7109 Statuses=0008 0009 05:22:08 Msec=3000 True Az=41.01 Ze=73.365 Az status=0008 Ze status=0009 05:22:08 Check angles 05:22:08 SkyScan query 05:22:08 SkyScan query done: ret=0 az=40.995<-2733 ze=52.815<-8479 Statuses=0008 0009 05:22:08 Msec=3750 True Az=40.995 Ze=52.815 Az status=0008 Ze status=0009 05:22:09 Check angles 05:22:09 SkyScan query 05:22:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:22:09 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:22:09 Message to Master queued w/err=0: serial=2229 error=0 05:22:14 Received message from Master: op=Filter serial=2230 05:22:14 Color wheel filter change from 0 to 0 05:22:14 FLIGetFilterPos err=0 currentPosition=0 05:22:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:14 Filter is already there-color wheel unchanged 05:22:14 Received message from Master: op=Shutter serial=2231 05:22:14 Shutter LASER close 05:22:15 Received message from Camera: op=State serial=2233 05:22:15 GetSingleValue result=40 Value=cccccccc 05:22:15 SkyScan query 05:22:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:15 Parameters OK 05:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:15 Set A/D data flow result=40 05:22:15 Set A/D channel type result=40 05:22:15 Set A/D encoding result=40 05:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:15 Set channel filter=0.000000e+000 result=40 05:22:15 Config A/D Result=40 05:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:15 Get A/D filter: -9.255963e+061 result=40 05:22:15 Get A/D value=-858993460 result=40 05:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:15 Parameters OK 05:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:15 Set A/D data flow result=40 05:22:15 Set A/D channel type result=40 05:22:15 Set A/D encoding result=40 05:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:15 Set channel filter=0.000000e+000 result=40 05:22:15 Config A/D Result=40 05:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:15 Get A/D filter: -9.255963e+061 result=40 05:22:15 Get A/D value=-858993460 result=40 05:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:15 Aux= 05:22:15 Message to Camera, serial 2233 queued 05:22:46 Received message from Master: op=PointingHead serial=2240 05:22:46 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:22:46 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:22:46 Point started: ret=0 05:22:46 point_skyscan result=0 05:22:47 Check angles 05:22:47 SkyScan query 05:22:48 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 05:22:48 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 05:22:48 Check angles 05:22:48 SkyScan query 05:22:48 SkyScan query done: ret=0 az=81.21<-5414 ze=66.51<-7566 Statuses=0009 0008 05:22:48 Msec=750 True Az=81.21 Ze=66.51 Az status=0009 Ze status=0008 05:22:49 Check angles 05:22:49 SkyScan query 05:22:49 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 05:22:49 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 05:22:49 Check angles 05:22:49 SkyScan query 05:22:50 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 05:22:50 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 05:22:50 Check angles 05:22:50 SkyScan query 05:22:51 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 05:22:51 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 05:22:51 Check angles 05:22:51 SkyScan query 05:22:51 SkyScan query done: ret=0 az=151.14<-10076 ze=66.495<-7567 Statuses=0009 0008 05:22:51 Msec=3750 True Az=151.14 Ze=66.495 Az status=0009 Ze status=0008 05:22:52 Check angles 05:22:52 SkyScan query 05:22:52 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:22:52 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:22:52 Message to Master queued w/err=0: serial=2240 error=0 05:22:57 Received message from Master: op=Filter serial=2241 05:22:57 Color wheel filter change from 0 to 0 05:22:57 FLIGetFilterPos err=0 currentPosition=0 05:22:57 FLIGetStepsRemaining err=0 RemainingSteps=0 05:22:57 Filter is already there-color wheel unchanged 05:22:57 Received message from Master: op=Shutter serial=2242 05:22:57 Shutter LASER close 05:22:57 Received message from Camera: op=State serial=2244 05:22:57 GetSingleValue result=40 Value=cccccccc 05:22:57 SkyScan query 05:22:58 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:22:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:58 Parameters OK 05:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:58 Set A/D data flow result=40 05:22:58 Set A/D channel type result=40 05:22:58 Set A/D encoding result=40 05:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:58 Set channel filter=0.000000e+000 result=40 05:22:58 Config A/D Result=40 05:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:58 Get A/D filter: -9.255963e+061 result=40 05:22:58 Get A/D value=-858993460 result=40 05:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:22:58 Parameters OK 05:22:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:22:58 Set A/D data flow result=40 05:22:58 Set A/D channel type result=40 05:22:58 Set A/D encoding result=40 05:22:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:22:58 Set channel filter=0.000000e+000 result=40 05:22:58 Config A/D Result=40 05:22:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:22:58 Get A/D filter: -9.255963e+061 result=40 05:22:58 Get A/D value=-858993460 result=40 05:22:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:22:58 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:22:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:22:58 Aux= 05:22:58 Message to Camera, serial 2244 queued 05:23:29 Received message from Master: op=PointingHead serial=2251 05:23:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:23:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:23:29 Point started: ret=0 05:23:29 point_skyscan result=0 05:23:30 Check angles 05:23:30 SkyScan query 05:23:30 SkyScan query done: ret=0 az=134.64<-8976 ze=36.42<-9572 Statuses=0009 0009 05:23:30 Msec=0 True Az=134.64 Ze=36.42 Az status=0009 Ze status=0009 05:23:31 Check angles 05:23:31 SkyScan query 05:23:31 SkyScan query done: ret=0 az=117.24<-7816 ze=15.465<-10969 Statuses=0009 0009 05:23:31 Msec=750 True Az=117.24 Ze=15.465 Az status=0009 Ze status=0009 05:23:31 Check angles 05:23:31 SkyScan query 05:23:32 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.505<-12367 Statuses=0009 0009 05:23:32 Msec=1500 True Az=99.825 Ze=-5.505 Az status=0009 Ze status=0009 05:23:32 Check angles 05:23:32 SkyScan query 05:23:33 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.46<-13764 Statuses=0009 0009 05:23:33 Msec=2250 True Az=82.245 Ze=-26.46 Az status=0009 Ze status=0009 05:23:33 Check angles 05:23:33 SkyScan query 05:23:33 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 05:23:33 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 05:23:34 Check angles 05:23:34 SkyScan query 05:23:34 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.535<-14569 Statuses=0009 0008 05:23:34 Msec=3750 True Az=47.34 Ze=-38.535 Az status=0009 Ze status=0008 05:23:34 Check angles 05:23:34 SkyScan query 05:23:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:23:35 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:23:35 Message to Master queued w/err=0: serial=2251 error=0 05:23:40 Received message from Master: op=Filter serial=2252 05:23:40 Color wheel filter change from 0 to 0 05:23:40 FLIGetFilterPos err=0 currentPosition=0 05:23:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:23:40 Filter is already there-color wheel unchanged 05:23:40 Received message from Master: op=Shutter serial=2253 05:23:40 Shutter LASER close 05:23:40 Received message from Camera: op=State serial=2255 05:23:40 GetSingleValue result=40 Value=cccccccc 05:23:40 SkyScan query 05:23:41 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:23:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:41 Parameters OK 05:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:41 Set A/D data flow result=40 05:23:41 Set A/D channel type result=40 05:23:41 Set A/D encoding result=40 05:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:41 Set channel filter=0.000000e+000 result=40 05:23:41 Config A/D Result=40 05:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:41 Get A/D filter: -9.255963e+061 result=40 05:23:41 Get A/D value=-858993460 result=40 05:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:23:41 Parameters OK 05:23:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:23:41 Set A/D data flow result=40 05:23:41 Set A/D channel type result=40 05:23:41 Set A/D encoding result=40 05:23:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:23:41 Set channel filter=0.000000e+000 result=40 05:23:41 Config A/D Result=40 05:23:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:23:41 Get A/D filter: -9.255963e+061 result=40 05:23:41 Get A/D value=-858993460 result=40 05:23:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:23:41 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:23:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:23:41 Aux= 05:23:41 Message to Camera, serial 2255 queued 05:24:12 Received message from Master: op=PointingHead serial=2262 05:24:12 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:24:12 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:24:12 Point started: ret=0 05:24:12 point_skyscan result=0 05:24:13 Check angles 05:24:13 SkyScan query 05:24:13 SkyScan query done: ret=0 az=63.66<-4244 ze=-68.01<-16534 Statuses=0009 0009 05:24:13 Msec=0 True Az=63.66 Ze=-68.01 Az status=0009 Ze status=0009 05:24:13 Check angles 05:24:13 SkyScan query 05:24:14 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.4<-17960 Statuses=0009 0009 05:24:14 Msec=750 True Az=81.585 Ze=-89.4 Az status=0009 Ze status=0009 05:24:14 Check angles 05:24:14 SkyScan query 05:24:15 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.355<-19357 Statuses=0009 0009 05:24:15 Msec=1500 True Az=99.135 Ze=-110.355 Az status=0009 Ze status=0009 05:24:15 Check angles 05:24:15 SkyScan query 05:24:15 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.295<-20753 Statuses=0009 0009 05:24:15 Msec=2250 True Az=116.505 Ze=-131.295 Az status=0009 Ze status=0009 05:24:16 Check angles 05:24:16 SkyScan query 05:24:16 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 05:24:16 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 05:24:16 Check angles 05:24:16 SkyScan query 05:24:17 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:24:17 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:24:17 Message to Master queued w/err=0: serial=2262 error=0 05:24:22 Received message from Master: op=Filter serial=2263 05:24:22 Color wheel filter change from 0 to 0 05:24:22 FLIGetFilterPos err=0 currentPosition=0 05:24:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:24:22 Filter is already there-color wheel unchanged 05:24:22 Received message from Master: op=Shutter serial=2264 05:24:22 Shutter LASER close 05:24:22 Received message from Camera: op=State serial=2266 05:24:22 GetSingleValue result=40 Value=cccccccc 05:24:22 SkyScan query 05:24:23 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:24:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:23 Parameters OK 05:24:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:23 Set A/D data flow result=40 05:24:23 Set A/D channel type result=40 05:24:23 Set A/D encoding result=40 05:24:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:23 Set channel filter=0.000000e+000 result=40 05:24:23 Config A/D Result=40 05:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:23 Get A/D filter: -9.255963e+061 result=40 05:24:23 Get A/D value=-858993460 result=40 05:24:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:24:23 Parameters OK 05:24:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:24:23 Set A/D data flow result=40 05:24:23 Set A/D channel type result=40 05:24:23 Set A/D encoding result=40 05:24:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:24:23 Set channel filter=0.000000e+000 result=40 05:24:23 Config A/D Result=40 05:24:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:24:23 Get A/D filter: -9.255963e+061 result=40 05:24:23 Get A/D value=-858993460 result=40 05:24:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:24:23 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:24:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:24:23 Aux= 05:24:23 Message to Camera, serial 2266 queued 05:24:54 Received message from Master: op=PointingHead serial=2273 05:24:54 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:24:54 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:24:54 Point started: ret=0 05:24:54 point_skyscan result=0 05:24:55 Check angles 05:24:55 SkyScan query 05:24:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.45<-23430 Statuses=0009 0009 05:24:55 Msec=0 True Az=113.01 Ze=-171.45 Az status=0009 Ze status=0009 05:24:55 Check angles 05:24:55 SkyScan query 05:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:24:56 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:24:56 Message to Master queued w/err=0: serial=2273 error=0 05:25:01 Received message from Master: op=Filter serial=2274 05:25:01 Color wheel filter change from 0 to 0 05:25:01 FLIGetFilterPos err=0 currentPosition=0 05:25:01 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:01 Filter is already there-color wheel unchanged 05:25:01 Received message from Master: op=Shutter serial=2275 05:25:01 Shutter LASER open 05:25:01 Received message from Camera: op=State serial=2277 05:25:01 GetSingleValue result=40 Value=cccccccc 05:25:01 SkyScan query 05:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:25:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:02 Parameters OK 05:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:02 Set A/D data flow result=40 05:25:02 Set A/D channel type result=40 05:25:02 Set A/D encoding result=40 05:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:02 Set channel filter=0.000000e+000 result=40 05:25:02 Config A/D Result=40 05:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:02 Get A/D filter: -9.255963e+061 result=40 05:25:02 Get A/D value=-858993460 result=40 05:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:02 Parameters OK 05:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:02 Set A/D data flow result=40 05:25:02 Set A/D channel type result=40 05:25:02 Set A/D encoding result=40 05:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:02 Set channel filter=0.000000e+000 result=40 05:25:02 Config A/D Result=40 05:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:02 Get A/D filter: -9.255963e+061 result=40 05:25:02 Get A/D value=-858993460 result=40 05:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:02 Aux= 05:25:02 Message to Camera, serial 2277 queued 05:25:04 Received message from Master: op=Shutter serial=2281 05:25:04 Shutter LASER close 05:25:05 Received message from Master: op=PointingHead serial=2285 05:25:05 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:25:05 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:25:05 Point started: ret=0 05:25:05 point_skyscan result=0 05:25:06 Check angles 05:25:06 SkyScan query 05:25:07 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.13<-21542 Statuses=0009 0009 05:25:07 Msec=0 True Az=135.99 Ze=-143.13 Az status=0009 Ze status=0009 05:25:07 Check angles 05:25:07 SkyScan query 05:25:07 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.16<-20144 Statuses=0009 0009 05:25:07 Msec=750 True Az=153.615 Ze=-122.16 Az status=0009 Ze status=0009 05:25:08 Check angles 05:25:08 SkyScan query 05:25:08 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.235<-18749 Statuses=0009 0009 05:25:08 Msec=1500 True Az=170.91 Ze=-101.235 Az status=0009 Ze status=0009 05:25:08 Check angles 05:25:08 SkyScan query 05:25:09 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.28<-17352 Statuses=0008 0009 05:25:09 Msec=2250 True Az=176.025 Ze=-80.28 Az status=0008 Ze status=0009 05:25:09 Check angles 05:25:09 SkyScan query 05:25:10 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.325<-15955 Statuses=0008 0009 05:25:10 Msec=3000 True Az=176.01 Ze=-59.325 Az status=0008 Ze status=0009 05:25:10 Check angles 05:25:10 SkyScan query 05:25:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:25:10 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:25:10 Message to Master queued w/err=0: serial=2285 error=0 05:25:15 Received message from Master: op=Filter serial=2286 05:25:15 Color wheel filter change from 0 to 0 05:25:15 FLIGetFilterPos err=0 currentPosition=0 05:25:15 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:15 Filter is already there-color wheel unchanged 05:25:16 Received message from Master: op=Shutter serial=2287 05:25:16 Shutter LASER close 05:25:16 Received message from Camera: op=State serial=2289 05:25:16 GetSingleValue result=40 Value=cccccccc 05:25:16 SkyScan query 05:25:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:25:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:16 Parameters OK 05:25:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:16 Set A/D data flow result=40 05:25:16 Set A/D channel type result=40 05:25:16 Set A/D encoding result=40 05:25:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:16 Set channel filter=0.000000e+000 result=40 05:25:16 Config A/D Result=40 05:25:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:16 Get A/D filter: -9.255963e+061 result=40 05:25:16 Get A/D value=-858993460 result=40 05:25:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:16 Parameters OK 05:25:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:16 Set A/D data flow result=40 05:25:16 Set A/D channel type result=40 05:25:16 Set A/D encoding result=40 05:25:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:16 Set channel filter=0.000000e+000 result=40 05:25:16 Config A/D Result=40 05:25:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:16 Get A/D filter: -9.255963e+061 result=40 05:25:16 Get A/D value=-858993460 result=40 05:25:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:16 Aux= 05:25:16 Message to Camera, serial 2289 queued 05:25:47 Received message from Master: op=PointingHead serial=2296 05:25:47 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:25:47 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:25:48 Point started: ret=0 05:25:48 point_skyscan result=0 05:25:48 Check angles 05:25:48 SkyScan query 05:25:49 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.78<-13452 Statuses=0009 0009 05:25:49 Msec=0 True Az=152.97 Ze=-21.78 Az status=0009 Ze status=0009 05:25:49 Check angles 05:25:49 SkyScan query 05:25:50 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.81<-12054 Statuses=0009 0009 05:25:50 Msec=750 True Az=135.585 Ze=-0.81 Az status=0009 Ze status=0009 05:25:50 Check angles 05:25:50 SkyScan query 05:25:50 SkyScan query done: ret=0 az=118.095<-7873 ze=20.145<-10657 Statuses=0009 0009 05:25:50 Msec=1500 True Az=118.095 Ze=20.145 Az status=0009 Ze status=0009 05:25:51 Check angles 05:25:51 SkyScan query 05:25:51 SkyScan query done: ret=0 az=100.68<-6712 ze=41.1<-9260 Statuses=0009 0009 05:25:51 Msec=2250 True Az=100.68 Ze=41.1 Az status=0009 Ze status=0009 05:25:51 Check angles 05:25:51 SkyScan query 05:25:52 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:25:52 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:25:52 Check angles 05:25:52 SkyScan query 05:25:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:25:53 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:25:53 Message to Master queued w/err=0: serial=2296 error=0 05:25:58 Received message from Master: op=Filter serial=2297 05:25:58 Color wheel filter change from 0 to 0 05:25:58 FLIGetFilterPos err=0 currentPosition=0 05:25:58 FLIGetStepsRemaining err=0 RemainingSteps=0 05:25:58 Filter is already there-color wheel unchanged 05:25:58 Received message from Master: op=Shutter serial=2298 05:25:58 Shutter LASER close 05:25:58 Received message from Camera: op=State serial=2300 05:25:58 GetSingleValue result=40 Value=cccccccc 05:25:58 SkyScan query 05:25:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:25:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:58 Parameters OK 05:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:58 Set A/D data flow result=40 05:25:58 Set A/D channel type result=40 05:25:58 Set A/D encoding result=40 05:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:58 Set channel filter=0.000000e+000 result=40 05:25:58 Config A/D Result=40 05:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:58 Get A/D filter: -9.255963e+061 result=40 05:25:58 Get A/D value=-858993460 result=40 05:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:25:58 Parameters OK 05:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:25:58 Set A/D data flow result=40 05:25:58 Set A/D channel type result=40 05:25:58 Set A/D encoding result=40 05:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:25:58 Set channel filter=0.000000e+000 result=40 05:25:58 Config A/D Result=40 05:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:25:58 Get A/D filter: -9.255963e+061 result=40 05:25:58 Get A/D value=-858993460 result=40 05:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:25:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:25:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:25:58 Aux= 05:25:58 Message to Camera, serial 2300 queued 05:26:29 Received message from Master: op=PointingHead serial=2307 05:26:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:26:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:26:30 Point started: ret=0 05:26:30 point_skyscan result=0 05:26:30 Check angles 05:26:30 SkyScan query 05:26:31 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 05:26:31 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 05:26:31 Check angles 05:26:31 SkyScan query 05:26:32 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 05:26:32 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 05:26:32 Check angles 05:26:32 SkyScan query 05:26:32 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 05:26:32 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 05:26:33 Check angles 05:26:33 SkyScan query 05:26:33 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 05:26:33 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 05:26:33 Check angles 05:26:33 SkyScan query 05:26:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 05:26:34 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 05:26:34 Check angles 05:26:34 SkyScan query 05:26:35 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:26:35 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:26:35 Message to Master queued w/err=0: serial=2307 error=0 05:26:40 Received message from Master: op=Filter serial=2308 05:26:40 Color wheel filter change from 0 to 0 05:26:40 FLIGetFilterPos err=0 currentPosition=0 05:26:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:26:40 Filter is already there-color wheel unchanged 05:26:40 Received message from Master: op=Shutter serial=2309 05:26:40 Shutter LASER close 05:26:40 Received message from Camera: op=State serial=2311 05:26:40 GetSingleValue result=40 Value=cccccccc 05:26:40 SkyScan query 05:26:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:40 Parameters OK 05:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:40 Set A/D data flow result=40 05:26:40 Set A/D channel type result=40 05:26:40 Set A/D encoding result=40 05:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:40 Set channel filter=0.000000e+000 result=40 05:26:40 Config A/D Result=40 05:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:40 Get A/D filter: -9.255963e+061 result=40 05:26:40 Get A/D value=-858993460 result=40 05:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:26:40 Parameters OK 05:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:26:40 Set A/D data flow result=40 05:26:40 Set A/D channel type result=40 05:26:40 Set A/D encoding result=40 05:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:26:40 Set channel filter=0.000000e+000 result=40 05:26:40 Config A/D Result=40 05:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:26:40 Get A/D filter: -9.255963e+061 result=40 05:26:40 Get A/D value=-858993460 result=40 05:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:26:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:26:40 Aux= 05:26:40 Message to Camera, serial 2311 queued 05:27:11 Received message from Master: op=PointingHead serial=2318 05:27:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:27:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:27:12 Point started: ret=0 05:27:12 point_skyscan result=0 05:27:13 Check angles 05:27:13 SkyScan query 05:27:13 SkyScan query done: ret=0 az=152.94<-10196 ze=8.655<-11423 Statuses=0009 0009 05:27:13 Msec=0 True Az=152.94 Ze=8.655 Az status=0009 Ze status=0009 05:27:13 Check angles 05:27:13 SkyScan query 05:27:14 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.3<-12820 Statuses=0009 0009 05:27:14 Msec=750 True Az=135.45 Ze=-12.3 Az status=0009 Ze status=0009 05:27:14 Check angles 05:27:14 SkyScan query 05:27:15 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.24<-14216 Statuses=0009 0009 05:27:15 Msec=1500 True Az=117.825 Ze=-33.24 Az status=0009 Ze status=0009 05:27:15 Check angles 05:27:15 SkyScan query 05:27:15 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.525<-15435 Statuses=0009 0009 05:27:15 Msec=2250 True Az=100.44 Ze=-51.525 Az status=0009 Ze status=0009 05:27:16 Check angles 05:27:16 SkyScan query 05:27:16 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 05:27:16 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 05:27:16 Check angles 05:27:16 SkyScan query 05:27:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:27:17 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:27:17 Message to Master queued w/err=0: serial=2318 error=0 05:27:22 Received message from Master: op=Filter serial=2319 05:27:22 Color wheel filter change from 0 to 0 05:27:22 FLIGetFilterPos err=0 currentPosition=0 05:27:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:27:22 Filter is already there-color wheel unchanged 05:27:22 Received message from Master: op=Shutter serial=2320 05:27:22 Shutter LASER close 05:27:22 Received message from Camera: op=State serial=2322 05:27:22 GetSingleValue result=40 Value=cccccccc 05:27:22 SkyScan query 05:27:23 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:27:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:23 Parameters OK 05:27:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:23 Set A/D data flow result=40 05:27:23 Set A/D channel type result=40 05:27:23 Set A/D encoding result=40 05:27:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:23 Set channel filter=0.000000e+000 result=40 05:27:23 Config A/D Result=40 05:27:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:23 Get A/D filter: -9.255963e+061 result=40 05:27:23 Get A/D value=-858993460 result=40 05:27:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:27:23 Parameters OK 05:27:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:27:23 Set A/D data flow result=40 05:27:23 Set A/D channel type result=40 05:27:23 Set A/D encoding result=40 05:27:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:27:23 Set channel filter=0.000000e+000 result=40 05:27:23 Config A/D Result=40 05:27:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:27:23 Get A/D filter: -9.255963e+061 result=40 05:27:23 Get A/D value=-858993460 result=40 05:27:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:27:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:27:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:27:23 Aux= 05:27:23 Message to Camera, serial 2322 queued 05:27:53 Received message from Master: op=PointingHead serial=2329 05:27:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:27:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:27:54 Point started: ret=0 05:27:54 point_skyscan result=0 05:27:55 Check angles 05:27:55 SkyScan query 05:27:55 SkyScan query done: ret=0 az=109.005<-7267 ze=-81.345<-17423 Statuses=0009 0009 05:27:55 Msec=0 True Az=109.005 Ze=-81.345 Az status=0009 Ze status=0009 05:27:55 Check angles 05:27:55 SkyScan query 05:27:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.3<-18820 Statuses=0008 0009 05:27:56 Msec=750 True Az=113.01 Ze=-102.3 Az status=0008 Ze status=0009 05:27:56 Check angles 05:27:56 SkyScan query 05:27:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 05:27:57 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 05:27:57 Check angles 05:27:57 SkyScan query 05:27:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 05:27:57 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 05:27:58 Check angles 05:27:58 SkyScan query 05:27:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 05:27:58 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 05:27:58 Check angles 05:27:58 SkyScan query 05:27:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:27:59 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:27:59 Message to Master queued w/err=0: serial=2329 error=0 05:28:04 Received message from Master: op=Filter serial=2330 05:28:04 Color wheel filter change from 0 to 0 05:28:04 FLIGetFilterPos err=0 currentPosition=0 05:28:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:04 Filter is already there-color wheel unchanged 05:28:04 Received message from Master: op=Shutter serial=2331 05:28:04 Shutter LASER open 05:28:04 Received message from Camera: op=State serial=2333 05:28:04 GetSingleValue result=40 Value=cccccccc 05:28:04 SkyScan query 05:28:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:28:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:05 Parameters OK 05:28:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:05 Set A/D data flow result=40 05:28:05 Set A/D channel type result=40 05:28:05 Set A/D encoding result=40 05:28:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:05 Set channel filter=0.000000e+000 result=40 05:28:05 Config A/D Result=40 05:28:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:05 Get A/D filter: -9.255963e+061 result=40 05:28:05 Get A/D value=-858993460 result=40 05:28:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:05 Parameters OK 05:28:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:05 Set A/D data flow result=40 05:28:05 Set A/D channel type result=40 05:28:05 Set A/D encoding result=40 05:28:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:05 Set channel filter=0.000000e+000 result=40 05:28:05 Config A/D Result=40 05:28:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:05 Get A/D filter: -9.255963e+061 result=40 05:28:05 Get A/D value=-858993460 result=40 05:28:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:05 Aux= 05:28:05 Message to Camera, serial 2333 queued 05:28:07 Received message from Master: op=Shutter serial=2337 05:28:07 Shutter LASER close 05:28:08 Received message from Master: op=PointingHead serial=2341 05:28:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:28:08 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:28:08 Point started: ret=0 05:28:08 point_skyscan result=0 05:28:09 Check angles 05:28:09 SkyScan query 05:28:09 SkyScan query done: ret=0 az=90.18<-6012 ze=157.47<-1502 Statuses=0009 0009 05:28:09 Msec=0 True Az=90.18 Ze=157.47 Az status=0009 Ze status=0009 05:28:10 Check angles 05:28:10 SkyScan query 05:28:10 SkyScan query done: ret=0 az=72.165<-4811 ze=136.08<-2928 Statuses=0009 0009 05:28:10 Msec=750 True Az=72.165 Ze=136.08 Az status=0009 Ze status=0009 05:28:10 Check angles 05:28:10 SkyScan query 05:28:11 SkyScan query done: ret=0 az=54.795<-3653 ze=115.14<-4324 Statuses=0009 0009 05:28:11 Msec=1500 True Az=54.795 Ze=115.14 Az status=0009 Ze status=0009 05:28:11 Check angles 05:28:11 SkyScan query 05:28:12 SkyScan query done: ret=0 az=40.86<-2724 ze=94.17<-5722 Statuses=0009 0009 05:28:12 Msec=2250 True Az=40.86 Ze=94.17 Az status=0009 Ze status=0009 05:28:12 Check angles 05:28:12 SkyScan query 05:28:12 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 05:28:12 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 05:28:13 Check angles 05:28:13 SkyScan query 05:28:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 05:28:13 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 05:28:13 Check angles 05:28:13 SkyScan query 05:28:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:28:14 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:28:14 Message to Master queued w/err=0: serial=2341 error=0 05:28:19 Received message from Master: op=Filter serial=2342 05:28:19 Color wheel filter change from 0 to 0 05:28:19 FLIGetFilterPos err=0 currentPosition=0 05:28:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:28:19 Filter is already there-color wheel unchanged 05:28:19 Received message from Master: op=Shutter serial=2343 05:28:19 Shutter LASER close 05:28:19 Received message from Camera: op=State serial=2345 05:28:19 GetSingleValue result=40 Value=cccccccc 05:28:19 SkyScan query 05:28:20 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:28:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:20 Parameters OK 05:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:20 Set A/D data flow result=40 05:28:20 Set A/D channel type result=40 05:28:20 Set A/D encoding result=40 05:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:20 Set channel filter=0.000000e+000 result=40 05:28:20 Config A/D Result=40 05:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:20 Get A/D filter: -9.255963e+061 result=40 05:28:20 Get A/D value=-858993460 result=40 05:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:28:20 Parameters OK 05:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:28:20 Set A/D data flow result=40 05:28:20 Set A/D channel type result=40 05:28:20 Set A/D encoding result=40 05:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:28:20 Set channel filter=0.000000e+000 result=40 05:28:20 Config A/D Result=40 05:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:28:20 Get A/D filter: -9.255963e+061 result=40 05:28:20 Get A/D value=-858993460 result=40 05:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:28:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:28:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:28:20 Aux= 05:28:20 Message to Camera, serial 2345 queued 05:28:51 Received message from Master: op=PointingHead serial=2352 05:28:51 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:28:51 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:28:51 Point started: ret=0 05:28:51 point_skyscan result=0 05:28:52 Check angles 05:28:52 SkyScan query 05:28:52 SkyScan query done: ret=0 az=63.885<-4259 ze=66.54<-7564 Statuses=0009 0008 05:28:52 Msec=0 True Az=63.885 Ze=66.54 Az status=0009 Ze status=0008 05:28:53 Check angles 05:28:53 SkyScan query 05:28:53 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 05:28:53 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 05:28:53 Check angles 05:28:53 SkyScan query 05:28:54 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 05:28:54 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 05:28:54 Check angles 05:28:54 SkyScan query 05:28:55 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 05:28:55 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 05:28:55 Check angles 05:28:55 SkyScan query 05:28:55 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 05:28:55 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 05:28:56 Check angles 05:28:56 SkyScan query 05:28:56 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 05:28:56 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 05:28:56 Check angles 05:28:56 SkyScan query 05:28:57 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:28:57 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:28:57 Message to Master queued w/err=0: serial=2352 error=0 05:29:02 Received message from Master: op=Filter serial=2353 05:29:02 Color wheel filter change from 0 to 0 05:29:02 FLIGetFilterPos err=0 currentPosition=0 05:29:02 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:02 Filter is already there-color wheel unchanged 05:29:02 Received message from Master: op=Shutter serial=2354 05:29:02 Shutter LASER close 05:29:02 Received message from Camera: op=State serial=2356 05:29:02 GetSingleValue result=40 Value=cccccccc 05:29:02 SkyScan query 05:29:03 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:29:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:03 Parameters OK [UTC 2018-12-4 05:29:03] 05:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:03 Set A/D data flow result=40 05:29:03 Set A/D channel type result=40 05:29:03 Set A/D encoding result=40 05:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:03 Set channel filter=0.000000e+000 result=40 05:29:03 Config A/D Result=40 05:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:03 Get A/D filter: -9.255963e+061 result=40 05:29:03 Get A/D value=-858993460 result=40 05:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:03 Parameters OK 05:29:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:03 Set A/D data flow result=40 05:29:03 Set A/D channel type result=40 05:29:03 Set A/D encoding result=40 05:29:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:03 Set channel filter=0.000000e+000 result=40 05:29:03 Config A/D Result=40 05:29:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:03 Get A/D filter: -9.255963e+061 result=40 05:29:03 Get A/D value=-858993460 result=40 05:29:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:03 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:03 Aux= 05:29:03 Message to Camera, serial 2356 queued 05:29:33 Received message from Master: op=PointingHead serial=2363 05:29:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:29:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:29:34 Point started: ret=0 05:29:34 point_skyscan result=0 05:29:35 Check angles 05:29:35 SkyScan query 05:29:35 SkyScan query done: ret=0 az=135.18<-9012 ze=36.855<-9543 Statuses=0009 0009 05:29:35 Msec=0 True Az=135.18 Ze=36.855 Az status=0009 Ze status=0009 05:29:35 Check angles 05:29:35 SkyScan query 05:29:36 SkyScan query done: ret=0 az=117.285<-7819 ze=15.495<-10967 Statuses=0009 0009 05:29:36 Msec=750 True Az=117.285 Ze=15.495 Az status=0009 Ze status=0009 05:29:36 Check angles 05:29:36 SkyScan query 05:29:37 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.49<-12366 Statuses=0009 0009 05:29:37 Msec=1500 True Az=99.87 Ze=-5.49 Az status=0009 Ze status=0009 05:29:37 Check angles 05:29:37 SkyScan query 05:29:37 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.445<-13763 Statuses=0009 0009 05:29:37 Msec=2250 True Az=82.305 Ze=-26.445 Az status=0009 Ze status=0009 05:29:38 Check angles 05:29:38 SkyScan query 05:29:38 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 05:29:38 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 05:29:38 Check angles 05:29:38 SkyScan query 05:29:39 SkyScan query done: ret=0 az=47.505<-3167 ze=-38.535<-14569 Statuses=0009 0008 05:29:39 Msec=3750 True Az=47.505 Ze=-38.535 Az status=0009 Ze status=0008 05:29:39 Check angles 05:29:39 SkyScan query 05:29:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:29:40 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:29:40 Message to Master queued w/err=0: serial=2363 error=0 05:29:45 Received message from Master: op=Filter serial=2364 05:29:45 Color wheel filter change from 0 to 0 05:29:45 FLIGetFilterPos err=0 currentPosition=0 05:29:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:29:45 Filter is already there-color wheel unchanged 05:29:45 Received message from Master: op=Shutter serial=2365 05:29:45 Shutter LASER close 05:29:45 Received message from Camera: op=State serial=2367 05:29:45 GetSingleValue result=40 Value=cccccccc 05:29:45 SkyScan query 05:29:46 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:29:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:46 Parameters OK 05:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:46 Set A/D data flow result=40 05:29:46 Set A/D channel type result=40 05:29:46 Set A/D encoding result=40 05:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:46 Set channel filter=0.000000e+000 result=40 05:29:46 Config A/D Result=40 05:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:46 Get A/D filter: -9.255963e+061 result=40 05:29:46 Get A/D value=-858993460 result=40 05:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:29:46 Parameters OK 05:29:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:29:46 Set A/D data flow result=40 05:29:46 Set A/D channel type result=40 05:29:46 Set A/D encoding result=40 05:29:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:29:46 Set channel filter=0.000000e+000 result=40 05:29:46 Config A/D Result=40 05:29:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:29:46 Get A/D filter: -9.255963e+061 result=40 05:29:46 Get A/D value=-858993460 result=40 05:29:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:29:46 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:29:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:29:46 Aux= 05:29:46 Message to Camera, serial 2367 queued 05:30:16 Received message from Master: op=PointingHead serial=2374 05:30:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:30:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:30:17 Point started: ret=0 05:30:17 point_skyscan result=0 05:30:17 Check angles 05:30:17 SkyScan query 05:30:18 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.205<-16547 Statuses=0009 0009 05:30:18 Msec=0 True Az=63.96 Ze=-68.205 Az status=0009 Ze status=0009 05:30:18 Check angles 05:30:18 SkyScan query 05:30:19 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.19<-17946 Statuses=0009 0009 05:30:19 Msec=750 True Az=81.36 Ze=-89.19 Az status=0009 Ze status=0009 05:30:19 Check angles 05:30:19 SkyScan query 05:30:20 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.1<-19340 Statuses=0009 0009 05:30:20 Msec=1500 True Az=98.955 Ze=-110.1 Az status=0009 Ze status=0009 05:30:20 Check angles 05:30:20 SkyScan query 05:30:20 SkyScan query done: ret=0 az=116.37<-7758 ze=-131.085<-20739 Statuses=0009 0009 05:30:20 Msec=2250 True Az=116.37 Ze=-131.085 Az status=0009 Ze status=0009 05:30:20 Check angles 05:30:20 SkyScan query 05:30:21 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 05:30:21 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 05:30:21 Check angles 05:30:21 SkyScan query 05:30:22 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:30:22 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:30:22 Message to Master queued w/err=0: serial=2374 error=0 05:30:27 Received message from Master: op=Filter serial=2375 05:30:27 Color wheel filter change from 0 to 0 05:30:27 FLIGetFilterPos err=0 currentPosition=0 05:30:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:30:27 Filter is already there-color wheel unchanged 05:30:27 Received message from Master: op=Shutter serial=2376 05:30:27 Shutter LASER close 05:30:27 Received message from Camera: op=State serial=2378 05:30:27 GetSingleValue result=40 Value=cccccccc 05:30:27 SkyScan query 05:30:28 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:30:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:28 Parameters OK 05:30:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:28 Set A/D data flow result=40 05:30:28 Set A/D channel type result=40 05:30:28 Set A/D encoding result=40 05:30:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:28 Set channel filter=0.000000e+000 result=40 05:30:28 Config A/D Result=40 05:30:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:28 Get A/D filter: -9.255963e+061 result=40 05:30:28 Get A/D value=-858993460 result=40 05:30:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:30:28 Parameters OK 05:30:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:30:28 Set A/D data flow result=40 05:30:28 Set A/D channel type result=40 05:30:28 Set A/D encoding result=40 05:30:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:30:28 Set channel filter=0.000000e+000 result=40 05:30:28 Config A/D Result=40 05:30:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:30:28 Get A/D filter: -9.255963e+061 result=40 05:30:28 Get A/D value=-858993460 result=40 05:30:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:30:28 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:30:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:30:28 Aux= 05:30:28 Message to Camera, serial 2378 queued 05:30:58 Received message from Master: op=PointingHead serial=2385 05:30:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:30:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:30:59 Point started: ret=0 05:30:59 point_skyscan result=0 05:31:00 Check angles 05:31:00 SkyScan query 05:31:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.48<-23432 Statuses=0008 0009 05:31:00 Msec=0 True Az=113.01 Ze=-171.48 Az status=0008 Ze status=0009 05:31:00 Check angles 05:31:00 SkyScan query 05:31:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:31:01 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:31:01 Message to Master queued w/err=0: serial=2385 error=0 05:31:06 Received message from Master: op=Filter serial=2386 05:31:06 Color wheel filter change from 0 to 0 05:31:06 FLIGetFilterPos err=0 currentPosition=0 05:31:06 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:06 Filter is already there-color wheel unchanged 05:31:06 Received message from Master: op=Shutter serial=2387 05:31:06 Shutter LASER open 05:31:06 Received message from Camera: op=State serial=2389 05:31:06 GetSingleValue result=40 Value=cccccccc 05:31:06 SkyScan query 05:31:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:31:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:07 Parameters OK 05:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:07 Set A/D data flow result=40 05:31:07 Set A/D channel type result=40 05:31:07 Set A/D encoding result=40 05:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:07 Set channel filter=0.000000e+000 result=40 05:31:07 Config A/D Result=40 05:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:07 Get A/D filter: -9.255963e+061 result=40 05:31:07 Get A/D value=-858993460 result=40 05:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:07 Parameters OK 05:31:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:07 Set A/D data flow result=40 05:31:07 Set A/D channel type result=40 05:31:07 Set A/D encoding result=40 05:31:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:07 Set channel filter=0.000000e+000 result=40 05:31:07 Config A/D Result=40 05:31:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:07 Get A/D filter: -9.255963e+061 result=40 05:31:07 Get A/D value=-858993460 result=40 05:31:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:07 Aux= 05:31:07 Message to Camera, serial 2389 queued 05:31:09 Received message from Master: op=Shutter serial=2393 05:31:09 Shutter LASER close 05:31:10 Received message from Master: op=PointingHead serial=2397 05:31:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:31:10 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:31:10 Point started: ret=0 05:31:10 point_skyscan result=0 05:31:11 Check angles 05:31:11 SkyScan query 05:31:12 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.325<-21555 Statuses=0009 0009 05:31:12 Msec=0 True Az=135.855 Ze=-143.325 Az status=0009 Ze status=0009 05:31:12 Check angles 05:31:12 SkyScan query 05:31:12 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.385<-20159 Statuses=0009 0009 05:31:12 Msec=750 True Az=153.39 Ze=-122.385 Az status=0009 Ze status=0009 05:31:12 Check angles 05:31:12 SkyScan query 05:31:13 SkyScan query done: ret=0 az=171.27<-11418 ze=-101.01<-18734 Statuses=0009 0009 05:31:13 Msec=1500 True Az=171.27 Ze=-101.01 Az status=0009 Ze status=0009 05:31:13 Check angles 05:31:13 SkyScan query 05:31:14 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.04<-17336 Statuses=0008 0009 05:31:14 Msec=2250 True Az=176.025 Ze=-80.04 Az status=0008 Ze status=0009 05:31:14 Check angles 05:31:14 SkyScan query 05:31:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 05:31:15 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 05:31:15 Check angles 05:31:15 SkyScan query 05:31:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:31:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:31:15 Message to Master queued w/err=0: serial=2397 error=0 05:31:20 Received message from Master: op=Filter serial=2398 05:31:20 Color wheel filter change from 0 to 0 05:31:20 FLIGetFilterPos err=0 currentPosition=0 05:31:20 FLIGetStepsRemaining err=0 RemainingSteps=0 05:31:20 Filter is already there-color wheel unchanged 05:31:20 Received message from Master: op=Shutter serial=2399 05:31:20 Shutter LASER close 05:31:21 Received message from Camera: op=State serial=2401 05:31:21 GetSingleValue result=40 Value=cccccccc 05:31:21 SkyScan query 05:31:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:31:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:21 Parameters OK 05:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:21 Set A/D data flow result=40 05:31:21 Set A/D channel type result=40 05:31:21 Set A/D encoding result=40 05:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:21 Set channel filter=0.000000e+000 result=40 05:31:21 Config A/D Result=40 05:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:21 Get A/D filter: -9.255963e+061 result=40 05:31:21 Get A/D value=-858993460 result=40 05:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:31:21 Parameters OK 05:31:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:31:21 Set A/D data flow result=40 05:31:21 Set A/D channel type result=40 05:31:21 Set A/D encoding result=40 05:31:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:31:21 Set channel filter=0.000000e+000 result=40 05:31:21 Config A/D Result=40 05:31:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:31:21 Get A/D filter: -9.255963e+061 result=40 05:31:21 Get A/D value=-858993460 result=40 05:31:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:31:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:31:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:31:21 Aux= 05:31:21 Message to Camera, serial 2401 queued 05:31:52 Received message from Master: op=PointingHead serial=2408 05:31:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:31:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:31:52 Point started: ret=0 05:31:52 point_skyscan result=0 05:31:53 Check angles 05:31:53 SkyScan query 05:31:54 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.915<-13461 Statuses=0009 0009 05:31:54 Msec=0 True Az=153.165 Ze=-21.915 Az status=0009 Ze status=0009 05:31:54 Check angles 05:31:54 SkyScan query 05:31:54 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.96<-12064 Statuses=0009 0009 05:31:54 Msec=750 True Az=135.705 Ze=-0.96 Az status=0009 Ze status=0009 05:31:55 Check angles 05:31:55 SkyScan query 05:31:55 SkyScan query done: ret=0 az=118.155<-7877 ze=19.995<-10667 Statuses=0009 0009 05:31:55 Msec=1500 True Az=118.155 Ze=19.995 Az status=0009 Ze status=0009 05:31:55 Check angles 05:31:55 SkyScan query 05:31:56 SkyScan query done: ret=0 az=100.38<-6692 ze=41.4<-9240 Statuses=0009 0009 05:31:56 Msec=2250 True Az=100.38 Ze=41.4 Az status=0009 Ze status=0009 05:31:56 Check angles 05:31:56 SkyScan query 05:31:57 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:31:57 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:31:57 Check angles 05:31:57 SkyScan query 05:31:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:31:58 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:31:58 Message to Master queued w/err=0: serial=2408 error=0 05:32:03 Received message from Master: op=Filter serial=2409 05:32:03 Color wheel filter change from 0 to 0 05:32:03 FLIGetFilterPos err=0 currentPosition=0 05:32:03 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:03 Filter is already there-color wheel unchanged 05:32:03 Received message from Master: op=Shutter serial=2410 05:32:03 Shutter LASER close 05:32:03 Received message from Camera: op=State serial=2412 05:32:03 GetSingleValue result=40 Value=cccccccc 05:32:03 SkyScan query 05:32:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:32:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:03 Parameters OK 05:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:03 Set A/D data flow result=40 05:32:03 Set A/D channel type result=40 05:32:03 Set A/D encoding result=40 05:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:03 Set channel filter=0.000000e+000 result=40 05:32:03 Config A/D Result=40 05:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:03 Get A/D filter: -9.255963e+061 result=40 05:32:03 Get A/D value=-858993460 result=40 05:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:03 Parameters OK 05:32:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:03 Set A/D data flow result=40 05:32:03 Set A/D channel type result=40 05:32:03 Set A/D encoding result=40 05:32:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:03 Set channel filter=0.000000e+000 result=40 05:32:03 Config A/D Result=40 05:32:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:03 Get A/D filter: -9.255963e+061 result=40 05:32:03 Get A/D value=-858993460 result=40 05:32:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:03 Aux= 05:32:03 Message to Camera, serial 2412 queued [UTC 2018-12-4 05:32:09] 05:32:34 Received message from Master: op=PointingHead serial=2419 05:32:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:32:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:32:35 Point started: ret=0 05:32:35 point_skyscan result=0 05:32:35 Check angles 05:32:35 SkyScan query 05:32:36 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 05:32:36 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 05:32:36 Check angles 05:32:36 SkyScan query 05:32:37 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 05:32:37 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 05:32:37 Check angles 05:32:37 SkyScan query 05:32:37 SkyScan query done: ret=0 az=143.985<-9599 ze=38.505<-9433 Statuses=0009 0008 05:32:37 Msec=1500 True Az=143.985 Ze=38.505 Az status=0009 Ze status=0008 05:32:38 Check angles 05:32:38 SkyScan query 05:32:38 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 05:32:38 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 05:32:38 Check angles 05:32:38 SkyScan query 05:32:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 05:32:39 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 05:32:39 Check angles 05:32:39 SkyScan query 05:32:40 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:32:40 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:32:40 Message to Master queued w/err=0: serial=2419 error=0 05:32:45 Received message from Master: op=Filter serial=2420 05:32:45 Color wheel filter change from 0 to 0 05:32:45 FLIGetFilterPos err=0 currentPosition=0 05:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 05:32:45 Filter is already there-color wheel unchanged 05:32:45 Received message from Master: op=Shutter serial=2421 05:32:45 Shutter LASER close 05:32:45 Received message from Camera: op=State serial=2423 05:32:45 GetSingleValue result=40 Value=cccccccc 05:32:45 SkyScan query 05:32:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:32:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:45 Parameters OK 05:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:45 Set A/D data flow result=40 05:32:45 Set A/D channel type result=40 05:32:45 Set A/D encoding result=40 05:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:45 Set channel filter=0.000000e+000 result=40 05:32:45 Config A/D Result=40 05:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:45 Get A/D filter: -9.255963e+061 result=40 05:32:45 Get A/D value=-858993460 result=40 05:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:32:45 Parameters OK 05:32:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:32:45 Set A/D data flow result=40 05:32:45 Set A/D channel type result=40 05:32:45 Set A/D encoding result=40 05:32:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:32:45 Set channel filter=0.000000e+000 result=40 05:32:45 Config A/D Result=40 05:32:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:32:45 Get A/D filter: -9.255963e+061 result=40 05:32:45 Get A/D value=-858993460 result=40 05:32:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:32:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:32:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:32:45 Aux= 05:32:45 Message to Camera, serial 2423 queued 05:33:16 Received message from Master: op=PointingHead serial=2430 05:33:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:33:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:33:17 Point started: ret=0 05:33:17 point_skyscan result=0 05:33:17 Check angles 05:33:17 SkyScan query 05:33:18 SkyScan query done: ret=0 az=152.775<-10185 ze=8.415<-11439 Statuses=0009 0009 05:33:18 Msec=0 True Az=152.775 Ze=8.415 Az status=0009 Ze status=0009 05:33:18 Check angles 05:33:18 SkyScan query 05:33:19 SkyScan query done: ret=0 az=135.33<-9022 ze=-12.645<-12843 Statuses=0009 0009 05:33:19 Msec=750 True Az=135.33 Ze=-12.645 Az status=0009 Ze status=0009 05:33:19 Check angles 05:33:19 SkyScan query 05:33:20 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.495<-14233 Statuses=0009 0009 05:33:20 Msec=1500 True Az=117.84 Ze=-33.495 Az status=0009 Ze status=0009 05:33:20 Check angles 05:33:20 SkyScan query 05:33:20 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 05:33:20 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 05:33:20 Check angles 05:33:20 SkyScan query 05:33:21 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 05:33:21 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 05:33:21 Check angles 05:33:21 SkyScan query 05:33:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 05:33:22 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 05:33:22 Message to Master queued w/err=0: serial=2430 error=0 05:33:27 Received message from Master: op=Filter serial=2431 05:33:27 Color wheel filter change from 0 to 0 05:33:27 FLIGetFilterPos err=0 currentPosition=0 05:33:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:33:27 Filter is already there-color wheel unchanged 05:33:27 Received message from Master: op=Shutter serial=2432 05:33:27 Shutter LASER close 05:33:27 Received message from Camera: op=State serial=2434 05:33:27 GetSingleValue result=40 Value=cccccccc 05:33:27 SkyScan query 05:33:28 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:33:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:28 Parameters OK 05:33:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:28 Set A/D data flow result=40 05:33:28 Set A/D channel type result=40 05:33:28 Set A/D encoding result=40 05:33:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:28 Set channel filter=0.000000e+000 result=40 05:33:28 Config A/D Result=40 05:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:28 Get A/D filter: -9.255963e+061 result=40 05:33:28 Get A/D value=-858993460 result=40 05:33:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:33:28 Parameters OK 05:33:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:33:28 Set A/D data flow result=40 05:33:28 Set A/D channel type result=40 05:33:28 Set A/D encoding result=40 05:33:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:33:28 Set channel filter=0.000000e+000 result=40 05:33:28 Config A/D Result=40 05:33:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:33:28 Get A/D filter: -9.255963e+061 result=40 05:33:28 Get A/D value=-858993460 result=40 05:33:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:33:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:33:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:33:28 Aux= 05:33:28 Message to Camera, serial 2434 queued 05:33:58 Received message from Master: op=PointingHead serial=2441 05:33:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:33:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:33:59 Point started: ret=0 05:33:59 point_skyscan result=0 05:34:00 Check angles 05:34:00 SkyScan query 05:34:00 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.15<-17410 Statuses=0009 0009 05:34:00 Msec=0 True Az=108.9 Ze=-81.15 Az status=0009 Ze status=0009 05:34:00 Check angles 05:34:00 SkyScan query 05:34:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.09<-18806 Statuses=0008 0009 05:34:01 Msec=750 True Az=113.01 Ze=-102.09 Az status=0008 Ze status=0009 05:34:01 Check angles 05:34:01 SkyScan query 05:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 05:34:02 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 05:34:02 Check angles 05:34:02 SkyScan query 05:34:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 05:34:02 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 05:34:03 Check angles 05:34:03 SkyScan query 05:34:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 05:34:03 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 05:34:03 Check angles 05:34:03 SkyScan query 05:34:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:34:04 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:34:04 Message to Master queued w/err=0: serial=2441 error=0 05:34:09 Received message from Master: op=Filter serial=2442 05:34:09 Color wheel filter change from 0 to 0 05:34:09 FLIGetFilterPos err=0 currentPosition=0 05:34:09 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:09 Filter is already there-color wheel unchanged 05:34:09 Received message from Master: op=Shutter serial=2443 05:34:09 Shutter LASER open 05:34:09 Received message from Camera: op=State serial=2445 05:34:09 GetSingleValue result=40 Value=cccccccc 05:34:09 SkyScan query 05:34:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:34:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:10 Parameters OK 05:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:10 Set A/D data flow result=40 05:34:10 Set A/D channel type result=40 05:34:10 Set A/D encoding result=40 05:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:10 Set channel filter=0.000000e+000 result=40 05:34:10 Config A/D Result=40 05:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:10 Get A/D filter: -9.255963e+061 result=40 05:34:10 Get A/D value=-858993460 result=40 05:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:10 Parameters OK 05:34:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:10 Set A/D data flow result=40 05:34:10 Set A/D channel type result=40 05:34:10 Set A/D encoding result=40 05:34:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:10 Set channel filter=0.000000e+000 result=40 05:34:10 Config A/D Result=40 05:34:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:10 Get A/D filter: -9.255963e+061 result=40 05:34:10 Get A/D value=-858993460 result=40 05:34:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:10 Aux= 05:34:10 Message to Camera, serial 2445 queued 05:34:12 Received message from Master: op=Shutter serial=2449 05:34:12 Shutter LASER close 05:34:13 Received message from Master: op=PointingHead serial=2453 05:34:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:34:13 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:34:13 Point started: ret=0 05:34:13 point_skyscan result=0 05:34:14 Check angles 05:34:14 SkyScan query 05:34:14 SkyScan query done: ret=0 az=89.685<-5979 ze=156.915<-1539 Statuses=0009 0009 05:34:14 Msec=0 True Az=89.685 Ze=156.915 Az status=0009 Ze status=0009 05:34:15 Check angles 05:34:15 SkyScan query 05:34:15 SkyScan query done: ret=0 az=72.285<-4819 ze=135.945<-2937 Statuses=0009 0009 05:34:15 Msec=750 True Az=72.285 Ze=135.945 Az status=0009 Ze status=0009 05:34:15 Check angles 05:34:15 SkyScan query 05:34:16 SkyScan query done: ret=0 az=54.78<-3652 ze=115.005<-4333 Statuses=0009 0009 05:34:16 Msec=1500 True Az=54.78 Ze=115.005 Az status=0009 Ze status=0009 05:34:16 Check angles 05:34:16 SkyScan query 05:34:17 SkyScan query done: ret=0 az=40.875<-2725 ze=94.035<-5731 Statuses=0009 0009 05:34:17 Msec=2250 True Az=40.875 Ze=94.035 Az status=0009 Ze status=0009 05:34:17 Check angles 05:34:17 SkyScan query 05:34:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 05:34:17 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 05:34:18 Check angles 05:34:18 SkyScan query 05:34:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 05:34:18 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 05:34:18 Check angles 05:34:18 SkyScan query 05:34:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:34:19 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:34:19 Message to Master queued w/err=0: serial=2453 error=0 05:34:24 Received message from Master: op=Filter serial=2454 05:34:24 Color wheel filter change from 0 to 0 05:34:24 FLIGetFilterPos err=0 currentPosition=0 05:34:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:34:24 Filter is already there-color wheel unchanged 05:34:24 Received message from Master: op=Shutter serial=2455 05:34:24 Shutter LASER close 05:34:24 Received message from Camera: op=State serial=2457 05:34:24 GetSingleValue result=40 Value=cccccccc 05:34:24 SkyScan query 05:34:25 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:25 Parameters OK 05:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:25 Set A/D data flow result=40 05:34:25 Set A/D channel type result=40 05:34:25 Set A/D encoding result=40 05:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:25 Set channel filter=0.000000e+000 result=40 05:34:25 Config A/D Result=40 05:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:25 Get A/D filter: -9.255963e+061 result=40 05:34:25 Get A/D value=-858993460 result=40 05:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:34:25 Parameters OK 05:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:34:25 Set A/D data flow result=40 05:34:25 Set A/D channel type result=40 05:34:25 Set A/D encoding result=40 05:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:34:25 Set channel filter=0.000000e+000 result=40 05:34:25 Config A/D Result=40 05:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:34:25 Get A/D filter: -9.255963e+061 result=40 05:34:25 Get A/D value=-858993460 result=40 05:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:34:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:34:25 Aux= 05:34:25 Message to Camera, serial 2457 queued 05:34:56 Received message from Master: op=PointingHead serial=2464 05:34:56 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:34:56 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:34:56 Point started: ret=0 05:34:56 point_skyscan result=0 05:34:57 Check angles 05:34:57 SkyScan query 05:34:57 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 05:34:57 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 05:34:58 Check angles 05:34:58 SkyScan query 05:34:58 SkyScan query done: ret=0 az=82.095<-5473 ze=66.51<-7566 Statuses=0009 0008 05:34:58 Msec=750 True Az=82.095 Ze=66.51 Az status=0009 Ze status=0008 05:34:58 Check angles 05:34:58 SkyScan query 05:34:59 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 05:34:59 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 05:34:59 Check angles 05:34:59 SkyScan query 05:35:00 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 05:35:00 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 05:35:00 Check angles 05:35:00 SkyScan query 05:35:00 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 05:35:00 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 05:35:01 Check angles 05:35:01 SkyScan query 05:35:01 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 05:35:01 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 05:35:01 Check angles 05:35:01 SkyScan query 05:35:02 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:35:02 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:35:02 Message to Master queued w/err=0: serial=2464 error=0 05:35:07 Received message from Master: op=Filter serial=2465 05:35:07 Color wheel filter change from 0 to 0 05:35:07 FLIGetFilterPos err=0 currentPosition=0 05:35:07 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:07 Filter is already there-color wheel unchanged 05:35:07 Received message from Master: op=Shutter serial=2466 05:35:07 Shutter LASER close 05:35:07 Received message from Camera: op=State serial=2468 05:35:07 GetSingleValue result=40 Value=cccccccc 05:35:07 SkyScan query 05:35:08 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:35:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:08 Parameters OK 05:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:08 Set A/D data flow result=40 05:35:08 Set A/D channel type result=40 05:35:08 Set A/D encoding result=40 05:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:08 Set channel filter=0.000000e+000 result=40 05:35:08 Config A/D Result=40 05:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:08 Get A/D filter: -9.255963e+061 result=40 05:35:08 Get A/D value=-858993460 result=40 05:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:08 Parameters OK 05:35:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:08 Set A/D data flow result=40 05:35:08 Set A/D channel type result=40 05:35:08 Set A/D encoding result=40 05:35:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:08 Set channel filter=0.000000e+000 result=40 05:35:08 Config A/D Result=40 05:35:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:08 Get A/D filter: -9.255963e+061 result=40 05:35:08 Get A/D value=-858993460 result=40 05:35:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:08 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:08 Aux= 05:35:08 Message to Camera, serial 2468 queued 05:35:39 Received message from Master: op=PointingHead serial=2475 05:35:39 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:35:39 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:35:39 Point started: ret=0 05:35:39 point_skyscan result=0 05:35:40 Check angles 05:35:40 SkyScan query 05:35:40 SkyScan query done: ret=0 az=134.79<-8986 ze=36.435<-9571 Statuses=0009 0009 05:35:40 Msec=0 True Az=134.79 Ze=36.435 Az status=0009 Ze status=0009 05:35:40 Check angles 05:35:40 SkyScan query 05:35:41 SkyScan query done: ret=0 az=116.895<-7793 ze=15.075<-10995 Statuses=0009 0009 05:35:41 Msec=750 True Az=116.895 Ze=15.075 Az status=0009 Ze status=0009 05:35:41 Check angles 05:35:41 SkyScan query 05:35:42 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.895<-12393 Statuses=0009 0009 05:35:42 Msec=1500 True Az=99.51 Ze=-5.895 Az status=0009 Ze status=0009 05:35:42 Check angles 05:35:42 SkyScan query 05:35:42 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.85<-13790 Statuses=0009 0009 05:35:42 Msec=2250 True Az=82.05 Ze=-26.85 Az status=0009 Ze status=0009 05:35:43 Check angles 05:35:43 SkyScan query 05:35:43 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.565<-14571 Statuses=0009 0008 05:35:43 Msec=3000 True Az=64.62 Ze=-38.565 Az status=0009 Ze status=0008 05:35:43 Check angles 05:35:43 SkyScan query 05:35:44 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.52<-14568 Statuses=0009 0008 05:35:44 Msec=3750 True Az=47.115 Ze=-38.52 Az status=0009 Ze status=0008 05:35:44 Check angles 05:35:44 SkyScan query 05:35:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:35:45 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:35:45 Message to Master queued w/err=0: serial=2475 error=0 05:35:50 Received message from Master: op=Filter serial=2476 05:35:50 Color wheel filter change from 0 to 0 05:35:50 FLIGetFilterPos err=0 currentPosition=0 05:35:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:35:50 Filter is already there-color wheel unchanged 05:35:50 Received message from Master: op=Shutter serial=2477 05:35:50 Shutter LASER close 05:35:50 Received message from Camera: op=State serial=2479 05:35:50 GetSingleValue result=40 Value=cccccccc 05:35:50 SkyScan query 05:35:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:35:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:51 Parameters OK 05:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:51 Set A/D data flow result=40 05:35:51 Set A/D channel type result=40 05:35:51 Set A/D encoding result=40 05:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:51 Set channel filter=0.000000e+000 result=40 05:35:51 Config A/D Result=40 05:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:51 Get A/D filter: -9.255963e+061 result=40 05:35:51 Get A/D value=-858993460 result=40 05:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:35:51 Parameters OK 05:35:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:35:51 Set A/D data flow result=40 05:35:51 Set A/D channel type result=40 05:35:51 Set A/D encoding result=40 05:35:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:35:51 Set channel filter=0.000000e+000 result=40 05:35:51 Config A/D Result=40 05:35:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:35:51 Get A/D filter: -9.255963e+061 result=40 05:35:51 Get A/D value=-858993460 result=40 05:35:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:35:51 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:35:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:35:51 Aux= 05:35:51 Message to Camera, serial 2479 queued 05:36:21 Received message from Master: op=PointingHead serial=2486 05:36:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:36:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:36:22 Point started: ret=0 05:36:22 point_skyscan result=0 05:36:22 Check angles 05:36:22 SkyScan query 05:36:23 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.64<-16576 Statuses=0009 0009 05:36:23 Msec=0 True Az=64.38 Ze=-68.64 Az status=0009 Ze status=0009 05:36:23 Check angles 05:36:23 SkyScan query 05:36:24 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.61<-17974 Statuses=0009 0009 05:36:24 Msec=750 True Az=81.975 Ze=-89.61 Az status=0009 Ze status=0009 05:36:24 Check angles 05:36:24 SkyScan query 05:36:25 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.565<-19371 Statuses=0009 0009 05:36:25 Msec=1500 True Az=99.39 Ze=-110.565 Az status=0009 Ze status=0009 05:36:25 Check angles 05:36:25 SkyScan query 05:36:25 SkyScan query done: ret=0 az=116.895<-7793 ze=-131.505<-20767 Statuses=0009 0009 05:36:25 Msec=2250 True Az=116.895 Ze=-131.505 Az status=0009 Ze status=0009 05:36:25 Check angles 05:36:25 SkyScan query 05:36:26 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 05:36:26 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 05:36:26 Check angles 05:36:26 SkyScan query 05:36:27 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:36:27 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:36:27 Message to Master queued w/err=0: serial=2486 error=0 05:36:32 Received message from Master: op=Filter serial=2487 05:36:32 Color wheel filter change from 0 to 0 05:36:32 FLIGetFilterPos err=0 currentPosition=0 05:36:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:36:32 Filter is already there-color wheel unchanged 05:36:32 Received message from Master: op=Shutter serial=2488 05:36:32 Shutter LASER close 05:36:32 Received message from Camera: op=State serial=2490 05:36:32 GetSingleValue result=40 Value=cccccccc 05:36:32 SkyScan query 05:36:33 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:36:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:33 Parameters OK 05:36:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:33 Set A/D data flow result=40 05:36:33 Set A/D channel type result=40 05:36:33 Set A/D encoding result=40 05:36:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:33 Set channel filter=0.000000e+000 result=40 05:36:33 Config A/D Result=40 05:36:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:33 Get A/D filter: -9.255963e+061 result=40 05:36:33 Get A/D value=-858993460 result=40 05:36:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:36:33 Parameters OK 05:36:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:36:33 Set A/D data flow result=40 05:36:33 Set A/D channel type result=40 05:36:33 Set A/D encoding result=40 05:36:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:36:33 Set channel filter=0.000000e+000 result=40 05:36:33 Config A/D Result=40 05:36:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:36:33 Get A/D filter: -9.255963e+061 result=40 05:36:33 Get A/D value=-858993460 result=40 05:36:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:36:33 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:36:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:36:33 Aux= 05:36:33 Message to Camera, serial 2490 queued 05:37:03 Received message from Master: op=PointingHead serial=2497 05:37:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:37:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:37:04 Point started: ret=0 05:37:04 point_skyscan result=0 05:37:05 Check angles 05:37:05 SkyScan query 05:37:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.955<-23397 Statuses=0009 0009 05:37:05 Msec=0 True Az=113.01 Ze=-170.955 Az status=0009 Ze status=0009 05:37:05 Check angles 05:37:05 SkyScan query 05:37:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:37:06 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:37:06 Message to Master queued w/err=0: serial=2497 error=0 05:37:11 Received message from Master: op=Filter serial=2498 05:37:11 Color wheel filter change from 0 to 0 05:37:11 FLIGetFilterPos err=0 currentPosition=0 05:37:11 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:11 Filter is already there-color wheel unchanged 05:37:11 Received message from Master: op=Shutter serial=2499 05:37:11 Shutter LASER open 05:37:11 Received message from Camera: op=State serial=2501 05:37:11 GetSingleValue result=40 Value=cccccccc 05:37:11 SkyScan query 05:37:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:37:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:12 Parameters OK 05:37:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:12 Set A/D data flow result=40 05:37:12 Set A/D channel type result=40 05:37:12 Set A/D encoding result=40 05:37:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:12 Set channel filter=0.000000e+000 result=40 05:37:12 Config A/D Result=40 05:37:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:12 Get A/D filter: -9.255963e+061 result=40 05:37:12 Get A/D value=-858993460 result=40 05:37:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:12 Parameters OK 05:37:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:12 Set A/D data flow result=40 05:37:12 Set A/D channel type result=40 05:37:12 Set A/D encoding result=40 05:37:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:12 Set channel filter=0.000000e+000 result=40 05:37:12 Config A/D Result=40 05:37:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:12 Get A/D filter: -9.255963e+061 result=40 05:37:12 Get A/D value=-858993460 result=40 05:37:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:12 Aux= 05:37:12 Message to Camera, serial 2501 queued 05:37:14 Received message from Master: op=Shutter serial=2505 05:37:14 Shutter LASER close 05:37:15 Received message from Master: op=PointingHead serial=2509 05:37:15 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:37:15 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:37:15 Point started: ret=0 05:37:15 point_skyscan result=0 05:37:16 Check angles 05:37:16 SkyScan query 05:37:16 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.52<-21568 Statuses=0009 0009 05:37:16 Msec=0 True Az=135.78 Ze=-143.52 Az status=0009 Ze status=0009 05:37:17 Check angles 05:37:17 SkyScan query 05:37:17 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.115<-20141 Statuses=0009 0009 05:37:17 Msec=750 True Az=153.615 Ze=-122.115 Az status=0009 Ze status=0009 05:37:17 Check angles 05:37:17 SkyScan query 05:37:18 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.755<-18717 Statuses=0009 0009 05:37:18 Msec=1500 True Az=171.45 Ze=-100.755 Az status=0009 Ze status=0009 05:37:18 Check angles 05:37:18 SkyScan query 05:37:19 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.8<-17320 Statuses=0008 0009 05:37:19 Msec=2250 True Az=176.025 Ze=-79.8 Az status=0008 Ze status=0009 05:37:19 Check angles 05:37:19 SkyScan query 05:37:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.845<-15923 Statuses=0008 0009 05:37:20 Msec=3000 True Az=175.995 Ze=-58.845 Az status=0008 Ze status=0009 05:37:20 Check angles 05:37:20 SkyScan query 05:37:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:37:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:37:20 Message to Master queued w/err=0: serial=2509 error=0 05:37:25 Received message from Master: op=Filter serial=2510 05:37:25 Color wheel filter change from 0 to 0 05:37:25 FLIGetFilterPos err=0 currentPosition=0 05:37:25 FLIGetStepsRemaining err=0 RemainingSteps=0 05:37:25 Filter is already there-color wheel unchanged 05:37:25 Received message from Master: op=Shutter serial=2511 05:37:25 Shutter LASER close 05:37:26 Received message from Camera: op=State serial=2513 05:37:26 GetSingleValue result=40 Value=cccccccc 05:37:26 SkyScan query 05:37:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:37:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:26 Parameters OK 05:37:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:26 Set A/D data flow result=40 05:37:26 Set A/D channel type result=40 05:37:26 Set A/D encoding result=40 05:37:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:26 Set channel filter=0.000000e+000 result=40 05:37:26 Config A/D Result=40 05:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:26 Get A/D filter: -9.255963e+061 result=40 05:37:26 Get A/D value=-858993460 result=40 05:37:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:37:26 Parameters OK 05:37:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:37:26 Set A/D data flow result=40 05:37:26 Set A/D channel type result=40 05:37:26 Set A/D encoding result=40 05:37:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:37:26 Set channel filter=0.000000e+000 result=40 05:37:26 Config A/D Result=40 05:37:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:37:26 Get A/D filter: -9.255963e+061 result=40 05:37:26 Get A/D value=-858993460 result=40 05:37:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:37:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:37:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:37:26 Aux= 05:37:26 Message to Camera, serial 2513 queued 05:37:57 Received message from Master: op=PointingHead serial=2520 05:37:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:37:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:37:57 Point started: ret=0 05:37:57 point_skyscan result=0 05:37:58 Check angles 05:37:58 SkyScan query 05:37:59 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.825<-13455 Statuses=0009 0009 05:37:59 Msec=0 True Az=153.105 Ze=-21.825 Az status=0009 Ze status=0009 05:37:59 Check angles 05:37:59 SkyScan query 05:38:00 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.87<-12058 Statuses=0009 0009 05:38:00 Msec=750 True Az=135.705 Ze=-0.87 Az status=0009 Ze status=0009 05:38:00 Check angles 05:38:00 SkyScan query 05:38:00 SkyScan query done: ret=0 az=118.08<-7872 ze=20.085<-10661 Statuses=0009 0009 05:38:00 Msec=1500 True Az=118.08 Ze=20.085 Az status=0009 Ze status=0009 05:38:00 Check angles 05:38:00 SkyScan query 05:38:01 SkyScan query done: ret=0 az=100.335<-6689 ze=41.475<-9235 Statuses=0009 0009 05:38:01 Msec=2250 True Az=100.335 Ze=41.475 Az status=0009 Ze status=0009 05:38:01 Check angles 05:38:01 SkyScan query 05:38:02 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:38:02 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:38:02 Check angles 05:38:02 SkyScan query 05:38:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:38:03 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:38:03 Message to Master queued w/err=0: serial=2520 error=0 05:38:08 Received message from Master: op=Filter serial=2521 05:38:08 Color wheel filter change from 0 to 0 05:38:08 FLIGetFilterPos err=0 currentPosition=0 05:38:08 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:08 Filter is already there-color wheel unchanged 05:38:08 Received message from Master: op=Shutter serial=2522 05:38:08 Shutter LASER close 05:38:08 Received message from Camera: op=State serial=2524 05:38:08 GetSingleValue result=40 Value=cccccccc 05:38:08 SkyScan query 05:38:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:38:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:08 Parameters OK 05:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:08 Set A/D data flow result=40 05:38:08 Set A/D channel type result=40 05:38:08 Set A/D encoding result=40 05:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:08 Set channel filter=0.000000e+000 result=40 05:38:08 Config A/D Result=40 05:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:08 Get A/D filter: -9.255963e+061 result=40 05:38:08 Get A/D value=-858993460 result=40 05:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:08 Parameters OK 05:38:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:08 Set A/D data flow result=40 05:38:08 Set A/D channel type result=40 05:38:08 Set A/D encoding result=40 05:38:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:08 Set channel filter=0.000000e+000 result=40 05:38:08 Config A/D Result=40 05:38:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:08 Get A/D filter: -9.255963e+061 result=40 05:38:08 Get A/D value=-858993460 result=40 05:38:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:08 Aux= 05:38:08 Message to Camera, serial 2524 queued 05:38:39 Received message from Master: op=PointingHead serial=2531 05:38:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:38:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:38:40 Point started: ret=0 05:38:40 point_skyscan result=0 05:38:40 Check angles 05:38:40 SkyScan query 05:38:41 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 05:38:41 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 05:38:41 Check angles 05:38:41 SkyScan query 05:38:42 SkyScan query done: ret=0 az=126.705<-8447 ze=38.505<-9433 Statuses=0009 0008 05:38:42 Msec=750 True Az=126.705 Ze=38.505 Az status=0009 Ze status=0008 05:38:42 Check angles 05:38:42 SkyScan query 05:38:42 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 05:38:42 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 05:38:43 Check angles 05:38:43 SkyScan query 05:38:43 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 05:38:43 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 05:38:43 Check angles 05:38:43 SkyScan query 05:38:44 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:38:44 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:38:44 Check angles 05:38:44 SkyScan query 05:38:45 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:38:45 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:38:45 Message to Master queued w/err=0: serial=2531 error=0 05:38:50 Received message from Master: op=Filter serial=2532 05:38:50 Color wheel filter change from 0 to 0 05:38:50 FLIGetFilterPos err=0 currentPosition=0 05:38:50 FLIGetStepsRemaining err=0 RemainingSteps=0 05:38:50 Filter is already there-color wheel unchanged 05:38:50 Received message from Master: op=Shutter serial=2533 05:38:50 Shutter LASER close 05:38:50 Received message from Camera: op=State serial=2535 05:38:50 GetSingleValue result=40 Value=cccccccc 05:38:50 SkyScan query 05:38:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:38:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:50 Parameters OK 05:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:50 Set A/D data flow result=40 05:38:50 Set A/D channel type result=40 05:38:50 Set A/D encoding result=40 05:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:50 Set channel filter=0.000000e+000 result=40 05:38:50 Config A/D Result=40 05:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:50 Get A/D filter: -9.255963e+061 result=40 05:38:50 Get A/D value=-858993460 result=40 05:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:38:50 Parameters OK 05:38:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:38:50 Set A/D data flow result=40 05:38:50 Set A/D channel type result=40 05:38:50 Set A/D encoding result=40 05:38:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:38:50 Set channel filter=0.000000e+000 result=40 05:38:50 Config A/D Result=40 05:38:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:38:50 Get A/D filter: -9.255963e+061 result=40 05:38:50 Get A/D value=-858993460 result=40 05:38:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:38:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:38:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:38:50 Aux= 05:38:50 Message to Camera, serial 2535 queued 05:39:21 Received message from Master: op=PointingHead serial=2542 05:39:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:39:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:39:22 Point started: ret=0 05:39:22 point_skyscan result=0 05:39:22 Check angles 05:39:22 SkyScan query 05:39:23 SkyScan query done: ret=0 az=152.97<-10198 ze=8.685<-11421 Statuses=0009 0009 05:39:23 Msec=0 True Az=152.97 Ze=8.685 Az status=0009 Ze status=0009 05:39:23 Check angles 05:39:23 SkyScan query 05:39:24 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.705<-12847 Statuses=0009 0009 05:39:24 Msec=750 True Az=135.135 Ze=-12.705 Az status=0009 Ze status=0009 05:39:24 Check angles 05:39:24 SkyScan query 05:39:24 SkyScan query done: ret=0 az=117.675<-7845 ze=-33.63<-14242 Statuses=0009 0009 05:39:24 Msec=1500 True Az=117.675 Ze=-33.63 Az status=0009 Ze status=0009 05:39:25 Check angles 05:39:25 SkyScan query 05:39:25 SkyScan query done: ret=0 az=99.96<-6664 ze=-51.555<-15437 Statuses=0009 0009 05:39:25 Msec=2250 True Az=99.96 Ze=-51.555 Az status=0009 Ze status=0009 05:39:25 Check angles 05:39:25 SkyScan query 05:39:26 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:39:26 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:39:26 Check angles 05:39:26 SkyScan query 05:39:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:39:27 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:39:27 Message to Master queued w/err=0: serial=2542 error=0 05:39:32 Received message from Master: op=Filter serial=2543 05:39:32 Color wheel filter change from 0 to 0 05:39:32 FLIGetFilterPos err=0 currentPosition=0 05:39:32 FLIGetStepsRemaining err=0 RemainingSteps=0 05:39:32 Filter is already there-color wheel unchanged 05:39:32 Received message from Master: op=Shutter serial=2544 05:39:32 Shutter LASER close 05:39:32 Received message from Camera: op=State serial=2546 05:39:32 GetSingleValue result=40 Value=cccccccc 05:39:32 SkyScan query 05:39:33 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:39:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:33 Parameters OK 05:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:33 Set A/D data flow result=40 05:39:33 Set A/D channel type result=40 05:39:33 Set A/D encoding result=40 05:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:33 Set channel filter=0.000000e+000 result=40 05:39:33 Config A/D Result=40 05:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:33 Get A/D filter: -9.255963e+061 result=40 05:39:33 Get A/D value=-858993460 result=40 05:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:39:33 Parameters OK 05:39:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:39:33 Set A/D data flow result=40 05:39:33 Set A/D channel type result=40 05:39:33 Set A/D encoding result=40 05:39:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:39:33 Set channel filter=0.000000e+000 result=40 05:39:33 Config A/D Result=40 05:39:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:39:33 Get A/D filter: -9.255963e+061 result=40 05:39:33 Get A/D value=-858993460 result=40 05:39:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:39:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:39:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:39:33 Aux= 05:39:33 Message to Camera, serial 2546 queued 05:40:03 Received message from Master: op=PointingHead serial=2553 05:40:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:40:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:40:04 Point started: ret=0 05:40:04 point_skyscan result=0 05:40:04 Check angles 05:40:04 SkyScan query 05:40:05 SkyScan query done: ret=0 az=109.29<-7286 ze=-81.33<-17422 Statuses=0009 0009 05:40:05 Msec=0 True Az=109.29 Ze=-81.33 Az status=0009 Ze status=0009 05:40:05 Check angles 05:40:05 SkyScan query 05:40:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.285<-18819 Statuses=0008 0009 05:40:06 Msec=750 True Az=113.01 Ze=-102.285 Az status=0008 Ze status=0009 05:40:06 Check angles 05:40:06 SkyScan query 05:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.255<-20217 Statuses=0008 0009 05:40:07 Msec=1500 True Az=112.995 Ze=-123.255 Az status=0008 Ze status=0009 05:40:07 Check angles 05:40:07 SkyScan query 05:40:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.195<-21613 Statuses=0008 0009 05:40:07 Msec=2250 True Az=112.995 Ze=-144.195 Az status=0008 Ze status=0009 05:40:07 Check angles 05:40:07 SkyScan query 05:40:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.15<-23010 Statuses=0008 0009 05:40:08 Msec=3000 True Az=112.995 Ze=-165.15 Az status=0008 Ze status=0009 05:40:08 Check angles 05:40:08 SkyScan query 05:40:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:40:09 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:40:09 Message to Master queued w/err=0: serial=2553 error=0 05:40:14 Received message from Master: op=Filter serial=2554 05:40:14 Color wheel filter change from 0 to 0 05:40:14 FLIGetFilterPos err=0 currentPosition=0 05:40:14 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:14 Filter is already there-color wheel unchanged 05:40:14 Received message from Master: op=Shutter serial=2555 05:40:14 Shutter LASER open 05:40:14 Received message from Camera: op=State serial=2557 05:40:14 GetSingleValue result=40 Value=cccccccc 05:40:14 SkyScan query 05:40:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:40:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:15 Parameters OK 05:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:15 Set A/D data flow result=40 05:40:15 Set A/D channel type result=40 05:40:15 Set A/D encoding result=40 05:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:15 Set channel filter=0.000000e+000 result=40 05:40:15 Config A/D Result=40 05:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:15 Get A/D filter: -9.255963e+061 result=40 05:40:15 Get A/D value=-858993460 result=40 05:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:15 Parameters OK 05:40:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:15 Set A/D data flow result=40 05:40:15 Set A/D channel type result=40 05:40:15 Set A/D encoding result=40 05:40:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:15 Set channel filter=0.000000e+000 result=40 05:40:15 Config A/D Result=40 05:40:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:15 Get A/D filter: -9.255963e+061 result=40 05:40:15 Get A/D value=-858993460 result=40 05:40:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:15 Aux= 05:40:15 Message to Camera, serial 2557 queued 05:40:17 Received message from Master: op=Shutter serial=2561 05:40:17 Shutter LASER close 05:40:18 Received message from Master: op=PointingHead serial=2565 05:40:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:40:18 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:40:18 Point started: ret=0 05:40:18 point_skyscan result=0 05:40:19 Check angles 05:40:19 SkyScan query 05:40:19 SkyScan query done: ret=0 az=90.165<-6011 ze=157.485<-1501 Statuses=0009 0009 05:40:19 Msec=0 True Az=90.165 Ze=157.485 Az status=0009 Ze status=0009 05:40:19 Check angles 05:40:19 SkyScan query 05:40:20 SkyScan query done: ret=0 az=72.78<-4852 ze=136.53<-2898 Statuses=0009 0009 05:40:20 Msec=750 True Az=72.78 Ze=136.53 Az status=0009 Ze status=0009 05:40:20 Check angles 05:40:20 SkyScan query 05:40:21 SkyScan query done: ret=0 az=55.095<-3673 ze=115.485<-4301 Statuses=0009 0009 05:40:21 Msec=1500 True Az=55.095 Ze=115.485 Az status=0009 Ze status=0009 05:40:21 Check angles 05:40:21 SkyScan query 05:40:22 SkyScan query done: ret=0 az=40.92<-2728 ze=94.605<-5693 Statuses=0009 0009 05:40:22 Msec=2250 True Az=40.92 Ze=94.605 Az status=0009 Ze status=0009 05:40:22 Check angles 05:40:22 SkyScan query 05:40:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.665<-7089 Statuses=0008 0009 05:40:22 Msec=3000 True Az=40.995 Ze=73.665 Az status=0008 Ze status=0009 05:40:22 Check angles 05:40:22 SkyScan query 05:40:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.995<-8467 Statuses=0008 0009 05:40:23 Msec=3750 True Az=40.995 Ze=52.995 Az status=0008 Ze status=0009 05:40:23 Check angles 05:40:23 SkyScan query 05:40:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:40:24 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:40:24 Message to Master queued w/err=0: serial=2565 error=0 05:40:29 Received message from Master: op=Filter serial=2566 05:40:29 Color wheel filter change from 0 to 0 05:40:29 FLIGetFilterPos err=0 currentPosition=0 05:40:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:40:29 Filter is already there-color wheel unchanged 05:40:29 Received message from Master: op=Shutter serial=2567 05:40:29 Shutter LASER close 05:40:29 Received message from Camera: op=State serial=2569 05:40:29 GetSingleValue result=40 Value=cccccccc 05:40:29 SkyScan query 05:40:30 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:30 Parameters OK 05:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:30 Set A/D data flow result=40 05:40:30 Set A/D channel type result=40 05:40:30 Set A/D encoding result=40 05:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:30 Set channel filter=0.000000e+000 result=40 05:40:30 Config A/D Result=40 05:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:30 Get A/D filter: -9.255963e+061 result=40 05:40:30 Get A/D value=-858993460 result=40 05:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:40:30 Parameters OK 05:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:40:30 Set A/D data flow result=40 05:40:30 Set A/D channel type result=40 05:40:30 Set A/D encoding result=40 05:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:40:30 Set channel filter=0.000000e+000 result=40 05:40:30 Config A/D Result=40 05:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:40:30 Get A/D filter: -9.255963e+061 result=40 05:40:30 Get A/D value=-858993460 result=40 05:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:40:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:40:30 Aux= [UTC 2018-12-4 05:40:30] 05:40:30 Message to Camera, serial 2569 queued 05:41:01 Received message from Master: op=PointingHead serial=2576 05:41:01 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:41:01 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:41:01 Point started: ret=0 05:41:01 point_skyscan result=0 05:41:02 Check angles 05:41:02 SkyScan query 05:41:02 SkyScan query done: ret=0 az=63.825<-4255 ze=66.57<-7562 Statuses=0009 0008 05:41:02 Msec=0 True Az=63.825 Ze=66.57 Az status=0009 Ze status=0008 05:41:02 Check angles 05:41:02 SkyScan query 05:41:03 SkyScan query done: ret=0 az=81.255<-5417 ze=66.51<-7566 Statuses=0009 0008 05:41:03 Msec=750 True Az=81.255 Ze=66.51 Az status=0009 Ze status=0008 05:41:03 Check angles 05:41:03 SkyScan query 05:41:04 SkyScan query done: ret=0 az=99.3<-6620 ze=66.51<-7566 Statuses=0009 0008 05:41:04 Msec=1500 True Az=99.3 Ze=66.51 Az status=0009 Ze status=0008 05:41:04 Check angles 05:41:04 SkyScan query 05:41:04 SkyScan query done: ret=0 az=116.745<-7783 ze=66.51<-7566 Statuses=0009 0008 05:41:04 Msec=2250 True Az=116.745 Ze=66.51 Az status=0009 Ze status=0008 05:41:05 Check angles 05:41:05 SkyScan query 05:41:05 SkyScan query done: ret=0 az=134.25<-8950 ze=66.51<-7566 Statuses=0009 0008 05:41:05 Msec=3000 True Az=134.25 Ze=66.51 Az status=0009 Ze status=0008 05:41:05 Check angles 05:41:05 SkyScan query 05:41:06 SkyScan query done: ret=0 az=151.905<-10127 ze=66.51<-7566 Statuses=0009 0008 05:41:06 Msec=3750 True Az=151.905 Ze=66.51 Az status=0009 Ze status=0008 05:41:06 Check angles 05:41:06 SkyScan query 05:41:07 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 05:41:07 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 05:41:07 Message to Master queued w/err=0: serial=2576 error=0 05:41:12 Received message from Master: op=Filter serial=2577 05:41:12 Color wheel filter change from 0 to 0 05:41:12 FLIGetFilterPos err=0 currentPosition=0 05:41:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:12 Filter is already there-color wheel unchanged 05:41:12 Received message from Master: op=Shutter serial=2578 05:41:12 Shutter LASER close 05:41:12 Received message from Camera: op=State serial=2580 05:41:12 GetSingleValue result=40 Value=cccccccc 05:41:12 SkyScan query 05:41:13 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 05:41:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:13 Parameters OK 05:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:13 Set A/D data flow result=40 05:41:13 Set A/D channel type result=40 05:41:13 Set A/D encoding result=40 05:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:13 Set channel filter=0.000000e+000 result=40 05:41:13 Config A/D Result=40 05:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:13 Get A/D filter: -9.255963e+061 result=40 05:41:13 Get A/D value=-858993460 result=40 05:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:13 Parameters OK 05:41:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:13 Set A/D data flow result=40 05:41:13 Set A/D channel type result=40 05:41:13 Set A/D encoding result=40 05:41:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:13 Set channel filter=0.000000e+000 result=40 05:41:13 Config A/D Result=40 05:41:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:13 Get A/D filter: -9.255963e+061 result=40 05:41:13 Get A/D value=-858993460 result=40 05:41:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:13 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:13 Aux= 05:41:13 Message to Camera, serial 2580 queued 05:41:43 Received message from Master: op=PointingHead serial=2587 05:41:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:41:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:41:44 Point started: ret=0 05:41:44 point_skyscan result=0 05:41:44 Check angles 05:41:44 SkyScan query 05:41:45 SkyScan query done: ret=0 az=134.745<-8983 ze=36.6<-9560 Statuses=0009 0009 05:41:45 Msec=0 True Az=134.745 Ze=36.6 Az status=0009 Ze status=0009 05:41:45 Check angles 05:41:45 SkyScan query 05:41:46 SkyScan query done: ret=0 az=117.255<-7817 ze=15.585<-10961 Statuses=0009 0009 05:41:46 Msec=750 True Az=117.255 Ze=15.585 Az status=0009 Ze status=0009 05:41:46 Check angles 05:41:46 SkyScan query 05:41:47 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.325<-12355 Statuses=0009 0009 05:41:47 Msec=1500 True Az=99.855 Ze=-5.325 Az status=0009 Ze status=0009 05:41:47 Check angles 05:41:47 SkyScan query 05:41:47 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.295<-13753 Statuses=0009 0009 05:41:47 Msec=2250 True Az=82.29 Ze=-26.295 Az status=0009 Ze status=0009 05:41:47 Check angles 05:41:47 SkyScan query 05:41:48 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 05:41:48 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 05:41:48 Check angles 05:41:48 SkyScan query 05:41:49 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 05:41:49 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 05:41:49 Check angles 05:41:49 SkyScan query 05:41:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:41:50 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:41:50 Message to Master queued w/err=0: serial=2587 error=0 05:41:55 Received message from Master: op=Filter serial=2588 05:41:55 Color wheel filter change from 0 to 0 05:41:55 FLIGetFilterPos err=0 currentPosition=0 05:41:55 FLIGetStepsRemaining err=0 RemainingSteps=0 05:41:55 Filter is already there-color wheel unchanged 05:41:55 Received message from Master: op=Shutter serial=2589 05:41:55 Shutter LASER close 05:41:55 Received message from Camera: op=State serial=2591 05:41:55 GetSingleValue result=40 Value=cccccccc 05:41:55 SkyScan query 05:41:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:41:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:55 Parameters OK 05:41:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:55 Set A/D data flow result=40 05:41:55 Set A/D channel type result=40 05:41:55 Set A/D encoding result=40 05:41:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:55 Set channel filter=0.000000e+000 result=40 05:41:55 Config A/D Result=40 05:41:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:55 Get A/D filter: -9.255963e+061 result=40 05:41:55 Get A/D value=-858993460 result=40 05:41:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:41:55 Parameters OK 05:41:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:41:55 Set A/D data flow result=40 05:41:55 Set A/D channel type result=40 05:41:55 Set A/D encoding result=40 05:41:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:41:55 Set channel filter=0.000000e+000 result=40 05:41:55 Config A/D Result=40 05:41:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:41:55 Get A/D filter: -9.255963e+061 result=40 05:41:55 Get A/D value=-858993460 result=40 05:41:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:41:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:41:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:41:55 Aux= 05:41:55 Message to Camera, serial 2591 queued 05:42:26 Received message from Master: op=PointingHead serial=2598 05:42:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:42:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:42:27 Point started: ret=0 05:42:27 point_skyscan result=0 05:42:27 Check angles 05:42:27 SkyScan query 05:42:28 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.52<-16568 Statuses=0009 0009 05:42:28 Msec=0 True Az=64.02 Ze=-68.52 Az status=0009 Ze status=0009 05:42:28 Check angles 05:42:28 SkyScan query 05:42:29 SkyScan query done: ret=0 az=81.705<-5447 ze=-89.475<-17965 Statuses=0009 0009 05:42:29 Msec=750 True Az=81.705 Ze=-89.475 Az status=0009 Ze status=0009 05:42:29 Check angles 05:42:29 SkyScan query 05:42:29 SkyScan query done: ret=0 az=99.225<-6615 ze=-110.43<-19362 Statuses=0009 0009 05:42:29 Msec=1500 True Az=99.225 Ze=-110.43 Az status=0009 Ze status=0009 05:42:30 Check angles 05:42:30 SkyScan query 05:42:30 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.37<-20758 Statuses=0009 0009 05:42:30 Msec=2250 True Az=116.565 Ze=-131.37 Az status=0009 Ze status=0009 05:42:30 Check angles 05:42:30 SkyScan query 05:42:31 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 05:42:31 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 05:42:31 Check angles 05:42:31 SkyScan query 05:42:32 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:42:32 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:42:32 Message to Master queued w/err=0: serial=2598 error=0 05:42:37 Received message from Master: op=Filter serial=2599 05:42:37 Color wheel filter change from 0 to 0 05:42:37 FLIGetFilterPos err=0 currentPosition=0 05:42:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:42:37 Filter is already there-color wheel unchanged 05:42:37 Received message from Master: op=Shutter serial=2600 05:42:37 Shutter LASER close 05:42:37 Received message from Camera: op=State serial=2602 05:42:37 GetSingleValue result=40 Value=cccccccc 05:42:37 SkyScan query 05:42:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:42:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:37 Parameters OK 05:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:37 Set A/D data flow result=40 05:42:37 Set A/D channel type result=40 05:42:37 Set A/D encoding result=40 05:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:37 Set channel filter=0.000000e+000 result=40 05:42:37 Config A/D Result=40 05:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:37 Get A/D filter: -9.255963e+061 result=40 05:42:37 Get A/D value=-858993460 result=40 05:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:42:37 Parameters OK 05:42:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:42:37 Set A/D data flow result=40 05:42:37 Set A/D channel type result=40 05:42:37 Set A/D encoding result=40 05:42:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:42:37 Set channel filter=0.000000e+000 result=40 05:42:37 Config A/D Result=40 05:42:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:42:37 Get A/D filter: -9.255963e+061 result=40 05:42:37 Get A/D value=-858993460 result=40 05:42:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:42:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:42:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:42:37 Aux= 05:42:37 Message to Camera, serial 2602 queued 05:43:08 Received message from Master: op=PointingHead serial=2609 05:43:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:43:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:43:09 Point started: ret=0 05:43:09 point_skyscan result=0 05:43:09 Check angles 05:43:09 SkyScan query 05:43:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 05:43:10 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 05:43:10 Check angles 05:43:10 SkyScan query 05:43:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:43:11 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:43:11 Message to Master queued w/err=0: serial=2609 error=0 05:43:16 Received message from Master: op=Filter serial=2610 05:43:16 Color wheel filter change from 0 to 0 05:43:16 FLIGetFilterPos err=0 currentPosition=0 05:43:16 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:16 Filter is already there-color wheel unchanged 05:43:16 Received message from Master: op=Shutter serial=2611 05:43:16 Shutter LASER open 05:43:16 Received message from Camera: op=State serial=2613 05:43:16 GetSingleValue result=40 Value=cccccccc 05:43:16 SkyScan query 05:43:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:43:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:17 Parameters OK 05:43:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:17 Set A/D data flow result=40 05:43:17 Set A/D channel type result=40 05:43:17 Set A/D encoding result=40 05:43:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:17 Set channel filter=0.000000e+000 result=40 05:43:17 Config A/D Result=40 05:43:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:17 Get A/D filter: -9.255963e+061 result=40 05:43:17 Get A/D value=-858993460 result=40 05:43:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:17 Parameters OK 05:43:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:17 Set A/D data flow result=40 05:43:17 Set A/D channel type result=40 05:43:17 Set A/D encoding result=40 05:43:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:17 Set channel filter=0.000000e+000 result=40 05:43:17 Config A/D Result=40 05:43:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:17 Get A/D filter: -9.255963e+061 result=40 05:43:17 Get A/D value=-858993460 result=40 05:43:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:17 Aux= 05:43:17 Message to Camera, serial 2613 queued 05:43:19 Received message from Master: op=Shutter serial=2617 05:43:19 Shutter LASER close 05:43:20 Received message from Master: op=PointingHead serial=2621 05:43:20 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:43:20 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:43:20 Point started: ret=0 05:43:20 point_skyscan result=0 05:43:21 Check angles 05:43:21 SkyScan query 05:43:21 SkyScan query done: ret=0 az=135.795<-9053 ze=-143.37<-21558 Statuses=0009 0009 05:43:21 Msec=0 True Az=135.795 Ze=-143.37 Az status=0009 Ze status=0009 05:43:22 Check angles 05:43:22 SkyScan query 05:43:22 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.43<-20162 Statuses=0009 0009 05:43:22 Msec=750 True Az=153.39 Ze=-122.43 Az status=0009 Ze status=0009 05:43:22 Check angles 05:43:22 SkyScan query 05:43:23 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.475<-18765 Statuses=0009 0009 05:43:23 Msec=1500 True Az=170.73 Ze=-101.475 Az status=0009 Ze status=0009 05:43:23 Check angles 05:43:23 SkyScan query 05:43:24 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.115<-17341 Statuses=0008 0009 05:43:24 Msec=2250 True Az=176.025 Ze=-80.115 Az status=0008 Ze status=0009 05:43:24 Check angles 05:43:24 SkyScan query 05:43:24 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 05:43:24 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 05:43:25 Check angles 05:43:25 SkyScan query 05:43:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:43:25 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:43:25 Message to Master queued w/err=0: serial=2621 error=0 05:43:30 Received message from Master: op=Filter serial=2622 05:43:30 Color wheel filter change from 0 to 0 05:43:30 FLIGetFilterPos err=0 currentPosition=0 05:43:30 FLIGetStepsRemaining err=0 RemainingSteps=0 05:43:30 Filter is already there-color wheel unchanged 05:43:30 Received message from Master: op=Shutter serial=2623 05:43:30 Shutter LASER close 05:43:31 Received message from Camera: op=State serial=2625 05:43:31 GetSingleValue result=40 Value=cccccccc 05:43:31 SkyScan query 05:43:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:43:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:31 Parameters OK 05:43:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:31 Set A/D data flow result=40 05:43:31 Set A/D channel type result=40 05:43:31 Set A/D encoding result=40 05:43:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:31 Set channel filter=0.000000e+000 result=40 05:43:31 Config A/D Result=40 05:43:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:31 Get A/D filter: -9.255963e+061 result=40 05:43:31 Get A/D value=-858993460 result=40 05:43:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:43:31 Parameters OK 05:43:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:43:31 Set A/D data flow result=40 05:43:31 Set A/D channel type result=40 05:43:31 Set A/D encoding result=40 05:43:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:43:31 Set channel filter=0.000000e+000 result=40 05:43:31 Config A/D Result=40 05:43:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:43:31 Get A/D filter: -9.255963e+061 result=40 05:43:31 Get A/D value=-858993460 result=40 05:43:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:43:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:43:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:43:31 Aux= 05:43:31 Message to Camera, serial 2625 queued 05:44:02 Received message from Master: op=PointingHead serial=2632 05:44:02 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:44:02 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:44:02 Point started: ret=0 05:44:02 point_skyscan result=0 05:44:03 Check angles 05:44:03 SkyScan query 05:44:04 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.645<-13443 Statuses=0009 0009 05:44:04 Msec=0 True Az=152.91 Ze=-21.645 Az status=0009 Ze status=0009 05:44:04 Check angles 05:44:04 SkyScan query 05:44:04 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.24<-12016 Statuses=0009 0009 05:44:04 Msec=750 True Az=135.09 Ze=-0.24 Az status=0009 Ze status=0009 05:44:05 Check angles 05:44:05 SkyScan query 05:44:05 SkyScan query done: ret=0 az=117.54<-7836 ze=20.7<-10620 Statuses=0009 0009 05:44:05 Msec=1500 True Az=117.54 Ze=20.7 Az status=0009 Ze status=0009 05:44:05 Check angles 05:44:05 SkyScan query 05:44:06 SkyScan query done: ret=0 az=100.185<-6679 ze=41.655<-9223 Statuses=0009 0009 05:44:06 Msec=2250 True Az=100.185 Ze=41.655 Az status=0009 Ze status=0009 05:44:06 Check angles 05:44:06 SkyScan query 05:44:07 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 05:44:07 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 05:44:07 Check angles 05:44:07 SkyScan query 05:44:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:44:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:44:07 Message to Master queued w/err=0: serial=2632 error=0 05:44:12 Received message from Master: op=Filter serial=2633 05:44:12 Color wheel filter change from 0 to 0 05:44:12 FLIGetFilterPos err=0 currentPosition=0 05:44:12 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:12 Filter is already there-color wheel unchanged 05:44:13 Received message from Master: op=Shutter serial=2634 05:44:13 Shutter LASER close 05:44:13 Received message from Camera: op=State serial=2636 05:44:13 GetSingleValue result=40 Value=cccccccc 05:44:13 SkyScan query 05:44:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:44:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:13 Parameters OK 05:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:13 Set A/D data flow result=40 05:44:13 Set A/D channel type result=40 05:44:13 Set A/D encoding result=40 05:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:13 Set channel filter=0.000000e+000 result=40 05:44:13 Config A/D Result=40 05:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:13 Get A/D filter: -9.255963e+061 result=40 05:44:13 Get A/D value=-858993460 result=40 05:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:13 Parameters OK 05:44:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:13 Set A/D data flow result=40 05:44:13 Set A/D channel type result=40 05:44:13 Set A/D encoding result=40 05:44:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:13 Set channel filter=0.000000e+000 result=40 05:44:13 Config A/D Result=40 05:44:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:13 Get A/D filter: -9.255963e+061 result=40 05:44:13 Get A/D value=-858993460 result=40 05:44:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:13 Aux= 05:44:13 Message to Camera, serial 2636 queued 05:44:44 Received message from Master: op=PointingHead serial=2643 05:44:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:44:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:44:44 Point started: ret=0 05:44:44 point_skyscan result=0 05:44:45 Check angles 05:44:45 SkyScan query 05:44:46 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 05:44:46 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 05:44:46 Check angles 05:44:46 SkyScan query 05:44:46 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 05:44:46 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 05:44:47 Check angles 05:44:47 SkyScan query 05:44:47 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 05:44:47 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 05:44:47 Check angles 05:44:47 SkyScan query 05:44:48 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 05:44:48 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 05:44:48 Check angles 05:44:48 SkyScan query 05:44:49 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 05:44:49 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 05:44:49 Check angles 05:44:49 SkyScan query 05:44:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:44:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:44:49 Message to Master queued w/err=0: serial=2643 error=0 05:44:54 Received message from Master: op=Filter serial=2644 05:44:54 Color wheel filter change from 0 to 0 05:44:54 FLIGetFilterPos err=0 currentPosition=0 05:44:54 FLIGetStepsRemaining err=0 RemainingSteps=0 05:44:54 Filter is already there-color wheel unchanged 05:44:55 Received message from Master: op=Shutter serial=2645 05:44:55 Shutter LASER close 05:44:55 Received message from Camera: op=State serial=2647 05:44:55 GetSingleValue result=40 Value=cccccccc 05:44:55 SkyScan query 05:44:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:44:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:55 Parameters OK 05:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:55 Set A/D data flow result=40 05:44:55 Set A/D channel type result=40 05:44:55 Set A/D encoding result=40 05:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:55 Set channel filter=0.000000e+000 result=40 05:44:55 Config A/D Result=40 05:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:55 Get A/D filter: -9.255963e+061 result=40 05:44:55 Get A/D value=-858993460 result=40 05:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:44:55 Parameters OK 05:44:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:44:55 Set A/D data flow result=40 05:44:55 Set A/D channel type result=40 05:44:55 Set A/D encoding result=40 05:44:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:44:55 Set channel filter=0.000000e+000 result=40 05:44:55 Config A/D Result=40 05:44:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:44:55 Get A/D filter: -9.255963e+061 result=40 05:44:55 Get A/D value=-858993460 result=40 05:44:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:44:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:44:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:44:55 Aux= 05:44:55 Message to Camera, serial 2647 queued 05:45:26 Received message from Master: op=PointingHead serial=2654 05:45:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:45:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:45:26 Point started: ret=0 05:45:26 point_skyscan result=0 05:45:27 Check angles 05:45:27 SkyScan query 05:45:28 SkyScan query done: ret=0 az=152.655<-10177 ze=8.16<-11456 Statuses=0009 0009 05:45:28 Msec=0 True Az=152.655 Ze=8.16 Az status=0009 Ze status=0009 05:45:28 Check angles 05:45:28 SkyScan query 05:45:29 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.78<-12852 Statuses=0009 0009 05:45:29 Msec=750 True Az=135.18 Ze=-12.78 Az status=0009 Ze status=0009 05:45:29 Check angles 05:45:29 SkyScan query 05:45:29 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.705<-14247 Statuses=0009 0009 05:45:29 Msec=1500 True Az=117.585 Ze=-33.705 Az status=0009 Ze status=0009 05:45:29 Check angles 05:45:29 SkyScan query 05:45:30 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.54<-15436 Statuses=0009 0009 05:45:30 Msec=2250 True Az=100.2 Ze=-51.54 Az status=0009 Ze status=0009 05:45:30 Check angles 05:45:30 SkyScan query 05:45:31 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:45:31 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:45:31 Check angles 05:45:31 SkyScan query 05:45:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:45:32 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:45:32 Message to Master queued w/err=0: serial=2654 error=0 05:45:37 Received message from Master: op=Filter serial=2655 05:45:37 Color wheel filter change from 0 to 0 05:45:37 FLIGetFilterPos err=0 currentPosition=0 05:45:37 FLIGetStepsRemaining err=0 RemainingSteps=0 05:45:37 Filter is already there-color wheel unchanged 05:45:37 Received message from Master: op=Shutter serial=2656 05:45:37 Shutter LASER close 05:45:37 Received message from Camera: op=State serial=2658 05:45:37 GetSingleValue result=40 Value=cccccccc 05:45:37 SkyScan query 05:45:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:45:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:37 Parameters OK 05:45:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:37 Set A/D data flow result=40 05:45:37 Set A/D channel type result=40 05:45:37 Set A/D encoding result=40 05:45:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:37 Set channel filter=0.000000e+000 result=40 05:45:37 Config A/D Result=40 05:45:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:37 Get A/D filter: -9.255963e+061 result=40 05:45:37 Get A/D value=-858993460 result=40 05:45:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:45:37 Parameters OK 05:45:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:45:37 Set A/D data flow result=40 05:45:37 Set A/D channel type result=40 05:45:37 Set A/D encoding result=40 05:45:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:45:37 Set channel filter=0.000000e+000 result=40 05:45:37 Config A/D Result=40 05:45:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:45:37 Get A/D filter: -9.255963e+061 result=40 05:45:37 Get A/D value=-858993460 result=40 05:45:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:45:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:45:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:45:37 Aux= 05:45:37 Message to Camera, serial 2658 queued 05:46:08 Received message from Master: op=PointingHead serial=2665 05:46:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:46:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:46:09 Point started: ret=0 05:46:09 point_skyscan result=0 05:46:09 Check angles 05:46:09 SkyScan query 05:46:10 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.66<-17444 Statuses=0009 0009 05:46:10 Msec=0 True Az=109.23 Ze=-81.66 Az status=0009 Ze status=0009 05:46:10 Check angles 05:46:10 SkyScan query 05:46:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.6<-18840 Statuses=0008 0009 05:46:11 Msec=750 True Az=113.01 Ze=-102.6 Az status=0008 Ze status=0009 05:46:11 Check angles 05:46:11 SkyScan query 05:46:11 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.975<-20265 Statuses=0008 0009 05:46:11 Msec=1500 True Az=113.01 Ze=-123.975 Az status=0008 Ze status=0009 05:46:12 Check angles 05:46:12 SkyScan query 05:46:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 05:46:12 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 05:46:12 Check angles 05:46:12 SkyScan query 05:46:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.855<-23057 Statuses=0008 0009 05:46:13 Msec=3000 True Az=112.995 Ze=-165.855 Az status=0008 Ze status=0009 05:46:13 Check angles 05:46:13 SkyScan query 05:46:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:46:14 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:46:14 Message to Master queued w/err=0: serial=2665 error=0 05:46:19 Received message from Master: op=Filter serial=2666 05:46:19 Color wheel filter change from 0 to 0 05:46:19 FLIGetFilterPos err=0 currentPosition=0 05:46:19 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:19 Filter is already there-color wheel unchanged 05:46:19 Received message from Master: op=Shutter serial=2667 05:46:19 Shutter LASER open 05:46:19 Received message from Camera: op=State serial=2669 05:46:19 GetSingleValue result=40 Value=cccccccc 05:46:19 SkyScan query 05:46:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:46:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:20 Parameters OK 05:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:20 Set A/D data flow result=40 05:46:20 Set A/D channel type result=40 05:46:20 Set A/D encoding result=40 05:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:20 Set channel filter=0.000000e+000 result=40 05:46:20 Config A/D Result=40 05:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:20 Get A/D filter: -9.255963e+061 result=40 05:46:20 Get A/D value=-858993460 result=40 05:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:20 Parameters OK 05:46:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:20 Set A/D data flow result=40 05:46:20 Set A/D channel type result=40 05:46:20 Set A/D encoding result=40 05:46:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:20 Set channel filter=0.000000e+000 result=40 05:46:20 Config A/D Result=40 05:46:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:20 Get A/D filter: -9.255963e+061 result=40 05:46:20 Get A/D value=-858993460 result=40 05:46:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:20 Aux= 05:46:20 Message to Camera, serial 2669 queued 05:46:22 Received message from Master: op=Shutter serial=2673 05:46:22 Shutter LASER close 05:46:22 Received message from Master: op=PointingHead serial=2677 05:46:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:46:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:46:23 Point started: ret=0 05:46:23 point_skyscan result=0 05:46:24 Check angles 05:46:24 SkyScan query 05:46:24 SkyScan query done: ret=0 az=89.655<-5977 ze=157.065<-1529 Statuses=0009 0009 05:46:24 Msec=0 True Az=89.655 Ze=157.065 Az status=0009 Ze status=0009 05:46:24 Check angles 05:46:24 SkyScan query 05:46:25 SkyScan query done: ret=0 az=72.33<-4822 ze=136.095<-2927 Statuses=0009 0009 05:46:25 Msec=750 True Az=72.33 Ze=136.095 Az status=0009 Ze status=0009 05:46:25 Check angles 05:46:25 SkyScan query 05:46:26 SkyScan query done: ret=0 az=54.765<-3651 ze=115.17<-4322 Statuses=0009 0009 05:46:26 Msec=1500 True Az=54.765 Ze=115.17 Az status=0009 Ze status=0009 05:46:26 Check angles 05:46:26 SkyScan query 05:46:26 SkyScan query done: ret=0 az=40.86<-2724 ze=94.17<-5722 Statuses=0009 0009 05:46:26 Msec=2250 True Az=40.86 Ze=94.17 Az status=0009 Ze status=0009 05:46:27 Check angles 05:46:27 SkyScan query 05:46:27 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 05:46:27 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 05:46:27 Check angles 05:46:27 SkyScan query 05:46:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 05:46:28 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 05:46:28 Check angles 05:46:28 SkyScan query 05:46:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:46:29 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:46:29 Message to Master queued w/err=0: serial=2677 error=0 05:46:34 Received message from Master: op=Filter serial=2678 05:46:34 Color wheel filter change from 0 to 0 05:46:34 FLIGetFilterPos err=0 currentPosition=0 05:46:34 FLIGetStepsRemaining err=0 RemainingSteps=0 05:46:34 Filter is already there-color wheel unchanged 05:46:34 Received message from Master: op=Shutter serial=2679 05:46:34 Shutter LASER close 05:46:34 Received message from Camera: op=State serial=2681 05:46:34 GetSingleValue result=40 Value=cccccccc 05:46:34 SkyScan query 05:46:35 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:46:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:35 Parameters OK 05:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:35 Set A/D data flow result=40 05:46:35 Set A/D channel type result=40 05:46:35 Set A/D encoding result=40 05:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:35 Set channel filter=0.000000e+000 result=40 05:46:35 Config A/D Result=40 05:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:35 Get A/D filter: -9.255963e+061 result=40 05:46:35 Get A/D value=-858993460 result=40 05:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:46:35 Parameters OK 05:46:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:46:35 Set A/D data flow result=40 05:46:35 Set A/D channel type result=40 05:46:35 Set A/D encoding result=40 05:46:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:46:35 Set channel filter=0.000000e+000 result=40 05:46:35 Config A/D Result=40 05:46:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:46:35 Get A/D filter: -9.255963e+061 result=40 05:46:35 Get A/D value=-858993460 result=40 05:46:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:46:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:46:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:46:35 Aux= 05:46:35 Message to Camera, serial 2681 queued 05:47:05 Received message from Master: op=PointingHead serial=2688 05:47:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:47:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:47:06 Point started: ret=0 05:47:06 point_skyscan result=0 05:47:06 Check angles 05:47:06 SkyScan query 05:47:07 SkyScan query done: ret=0 az=64.23<-4282 ze=66.555<-7563 Statuses=0009 0008 05:47:07 Msec=0 True Az=64.23 Ze=66.555 Az status=0009 Ze status=0008 05:47:07 Check angles 05:47:07 SkyScan query 05:47:08 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 05:47:08 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 05:47:08 Check angles 05:47:08 SkyScan query 05:47:09 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 05:47:09 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 05:47:09 Check angles 05:47:09 SkyScan query 05:47:09 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 05:47:09 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 05:47:09 Check angles 05:47:09 SkyScan query 05:47:10 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 05:47:10 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 05:47:10 Check angles 05:47:10 SkyScan query 05:47:11 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 05:47:11 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 05:47:11 Check angles 05:47:11 SkyScan query 05:47:12 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:47:12 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:47:12 Message to Master queued w/err=0: serial=2688 error=0 05:47:17 Received message from Master: op=Filter serial=2689 05:47:17 Color wheel filter change from 0 to 0 05:47:17 FLIGetFilterPos err=0 currentPosition=0 05:47:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:17 Filter is already there-color wheel unchanged 05:47:17 Received message from Master: op=Shutter serial=2690 05:47:17 Shutter LASER close 05:47:17 Received message from Camera: op=State serial=2692 05:47:17 GetSingleValue result=40 Value=cccccccc 05:47:17 SkyScan query 05:47:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:47:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:17 Parameters OK 05:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:17 Set A/D data flow result=40 05:47:17 Set A/D channel type result=40 05:47:17 Set A/D encoding result=40 05:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:17 Set channel filter=0.000000e+000 result=40 05:47:17 Config A/D Result=40 05:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:17 Get A/D filter: -9.255963e+061 result=40 05:47:17 Get A/D value=-858993460 result=40 05:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:47:17 Parameters OK 05:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:47:17 Set A/D data flow result=40 05:47:17 Set A/D channel type result=40 05:47:17 Set A/D encoding result=40 05:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:47:17 Set channel filter=0.000000e+000 result=40 05:47:17 Config A/D Result=40 05:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:47:17 Get A/D filter: -9.255963e+061 result=40 05:47:17 Get A/D value=-858993460 result=40 05:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:47:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:47:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:47:17 Aux= 05:47:17 Message to Camera, serial 2692 queued 05:47:48 Received message from Master: op=PointingHead serial=2699 05:47:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:47:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:47:49 Point started: ret=0 05:47:49 point_skyscan result=0 05:47:49 Check angles 05:47:49 SkyScan query 05:47:50 SkyScan query done: ret=0 az=134.865<-8991 ze=36.57<-9562 Statuses=0009 0009 05:47:50 Msec=0 True Az=134.865 Ze=36.57 Az status=0009 Ze status=0009 05:47:50 Check angles 05:47:50 SkyScan query 05:47:51 SkyScan query done: ret=0 az=117.045<-7803 ze=15.165<-10989 Statuses=0009 0009 05:47:51 Msec=750 True Az=117.045 Ze=15.165 Az status=0009 Ze status=0009 05:47:51 Check angles 05:47:51 SkyScan query 05:47:51 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.82<-12388 Statuses=0009 0009 05:47:51 Msec=1500 True Az=99.66 Ze=-5.82 Az status=0009 Ze status=0009 05:47:52 Check angles 05:47:52 SkyScan query 05:47:52 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.76<-13784 Statuses=0009 0009 05:47:52 Msec=2250 True Az=82.155 Ze=-26.76 Az status=0009 Ze status=0009 05:47:52 Check angles 05:47:52 SkyScan query 05:47:53 SkyScan query done: ret=0 az=64.32<-4288 ze=-38.565<-14571 Statuses=0009 0008 05:47:53 Msec=3000 True Az=64.32 Ze=-38.565 Az status=0009 Ze status=0008 05:47:53 Check angles 05:47:53 SkyScan query 05:47:54 SkyScan query done: ret=0 az=46.53<-3102 ze=-38.52<-14568 Statuses=0009 0008 05:47:54 Msec=3750 True Az=46.53 Ze=-38.52 Az status=0009 Ze status=0008 05:47:54 Check angles 05:47:54 SkyScan query 05:47:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:47:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:47:54 Message to Master queued w/err=0: serial=2699 error=0 05:47:59 Received message from Master: op=Filter serial=2700 05:47:59 Color wheel filter change from 0 to 0 05:47:59 FLIGetFilterPos err=0 currentPosition=0 05:47:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:47:59 Filter is already there-color wheel unchanged 05:48:00 Received message from Master: op=Shutter serial=2701 05:48:00 Shutter LASER close 05:48:00 Received message from Camera: op=State serial=2703 05:48:00 GetSingleValue result=40 Value=cccccccc 05:48:00 SkyScan query 05:48:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:48:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:00 Parameters OK 05:48:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:00 Set A/D data flow result=40 05:48:00 Set A/D channel type result=40 05:48:00 Set A/D encoding result=40 05:48:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:00 Set channel filter=0.000000e+000 result=40 05:48:00 Config A/D Result=40 05:48:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:00 Get A/D filter: -9.255963e+061 result=40 05:48:00 Get A/D value=-858993460 result=40 05:48:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:00 Parameters OK 05:48:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:00 Set A/D data flow result=40 05:48:00 Set A/D channel type result=40 05:48:00 Set A/D encoding result=40 05:48:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:00 Set channel filter=0.000000e+000 result=40 05:48:00 Config A/D Result=40 05:48:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:00 Get A/D filter: -9.255963e+061 result=40 05:48:00 Get A/D value=-858993460 result=40 05:48:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:00 Aux= 05:48:00 Message to Camera, serial 2703 queued 05:48:31 Received message from Master: op=PointingHead serial=2710 05:48:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:48:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:48:31 Point started: ret=0 05:48:31 point_skyscan result=0 05:48:32 Check angles 05:48:32 SkyScan query 05:48:33 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.805<-16587 Statuses=0009 0009 05:48:33 Msec=0 True Az=64.26 Ze=-68.805 Az status=0009 Ze status=0009 05:48:33 Check angles 05:48:33 SkyScan query 05:48:33 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.745<-17983 Statuses=0009 0009 05:48:33 Msec=750 True Az=82.02 Ze=-89.745 Az status=0009 Ze status=0009 05:48:34 Check angles 05:48:34 SkyScan query 05:48:34 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.7<-19380 Statuses=0009 0009 05:48:34 Msec=1500 True Az=99.435 Ze=-110.7 Az status=0009 Ze status=0009 05:48:34 Check angles 05:48:34 SkyScan query 05:48:35 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.64<-20776 Statuses=0009 0009 05:48:35 Msec=2250 True Az=116.82 Ze=-131.64 Az status=0009 Ze status=0009 05:48:35 Check angles 05:48:35 SkyScan query 05:48:36 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 05:48:36 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 05:48:36 Check angles 05:48:36 SkyScan query 05:48:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:48:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:48:36 Message to Master queued w/err=0: serial=2710 error=0 05:48:41 Received message from Master: op=Filter serial=2711 05:48:41 Color wheel filter change from 0 to 0 05:48:41 FLIGetFilterPos err=0 currentPosition=0 05:48:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:48:41 Filter is already there-color wheel unchanged 05:48:42 Received message from Master: op=Shutter serial=2712 05:48:42 Shutter LASER close 05:48:42 Received message from Camera: op=State serial=2714 05:48:42 GetSingleValue result=40 Value=cccccccc 05:48:42 SkyScan query 05:48:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:48:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:42 Parameters OK 05:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:42 Set A/D data flow result=40 05:48:42 Set A/D channel type result=40 05:48:42 Set A/D encoding result=40 05:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:42 Set channel filter=0.000000e+000 result=40 05:48:42 Config A/D Result=40 05:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:42 Get A/D filter: -9.255963e+061 result=40 05:48:42 Get A/D value=-858993460 result=40 05:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:48:42 Parameters OK 05:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:48:42 Set A/D data flow result=40 05:48:42 Set A/D channel type result=40 05:48:42 Set A/D encoding result=40 05:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:48:42 Set channel filter=0.000000e+000 result=40 05:48:42 Config A/D Result=40 05:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:48:42 Get A/D filter: -9.255963e+061 result=40 05:48:42 Get A/D value=-858993460 result=40 05:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:48:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:48:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:48:42 Aux= 05:48:42 Message to Camera, serial 2714 queued 05:49:13 Received message from Master: op=PointingHead serial=2721 05:49:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:49:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:49:14 Point started: ret=0 05:49:14 point_skyscan result=0 05:49:14 Check angles 05:49:14 SkyScan query 05:49:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.09<-23406 Statuses=0009 0009 05:49:15 Msec=0 True Az=113.01 Ze=-171.09 Az status=0009 Ze status=0009 05:49:15 Check angles 05:49:15 SkyScan query 05:49:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:49:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:49:16 Message to Master queued w/err=0: serial=2721 error=0 05:49:21 Received message from Master: op=Filter serial=2722 05:49:21 Color wheel filter change from 0 to 0 05:49:21 FLIGetFilterPos err=0 currentPosition=0 05:49:21 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:21 Filter is already there-color wheel unchanged 05:49:21 Received message from Master: op=Shutter serial=2723 05:49:21 Shutter LASER open 05:49:21 Received message from Camera: op=State serial=2725 05:49:21 GetSingleValue result=40 Value=cccccccc 05:49:21 SkyScan query 05:49:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:49:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:22 Parameters OK 05:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:22 Set A/D data flow result=40 05:49:22 Set A/D channel type result=40 05:49:22 Set A/D encoding result=40 05:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:22 Set channel filter=0.000000e+000 result=40 05:49:22 Config A/D Result=40 05:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:22 Get A/D filter: -9.255963e+061 result=40 05:49:22 Get A/D value=-858993460 result=40 05:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:22 Parameters OK 05:49:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:22 Set A/D data flow result=40 05:49:22 Set A/D channel type result=40 05:49:22 Set A/D encoding result=40 05:49:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:22 Set channel filter=0.000000e+000 result=40 05:49:22 Config A/D Result=40 05:49:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:22 Get A/D filter: -9.255963e+061 result=40 05:49:22 Get A/D value=-858993460 result=40 05:49:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:22 Aux= 05:49:22 Message to Camera, serial 2725 queued 05:49:24 Received message from Master: op=Shutter serial=2729 05:49:24 Shutter LASER close 05:49:25 Received message from Master: op=PointingHead serial=2733 05:49:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:49:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:49:25 Point started: ret=0 05:49:25 point_skyscan result=0 05:49:26 Check angles 05:49:26 SkyScan query 05:49:26 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.13<-21542 Statuses=0009 0009 05:49:26 Msec=0 True Az=135.975 Ze=-143.13 Az status=0009 Ze status=0009 05:49:26 Check angles [UTC 2018-12-4 05:49:26] 05:49:26 SkyScan query 05:49:27 SkyScan query done: ret=0 az=155.055<-10337 ze=-120.405<-20027 Statuses=0009 0009 05:49:27 Msec=750 True Az=155.055 Ze=-120.405 Az status=0009 Ze status=0009 05:49:27 Check angles 05:49:27 SkyScan query 05:49:28 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.235<-18749 Statuses=0009 0009 05:49:28 Msec=1500 True Az=171.015 Ze=-101.235 Az status=0009 Ze status=0009 05:49:28 Check angles 05:49:28 SkyScan query 05:49:29 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.845<-17323 Statuses=0008 0009 05:49:29 Msec=2250 True Az=176.025 Ze=-79.845 Az status=0008 Ze status=0009 05:49:29 Check angles 05:49:29 SkyScan query 05:49:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 05:49:29 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 05:49:29 Check angles 05:49:29 SkyScan query 05:49:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:49:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:49:30 Message to Master queued w/err=0: serial=2733 error=0 05:49:35 Received message from Master: op=Filter serial=2734 05:49:35 Color wheel filter change from 0 to 0 05:49:35 FLIGetFilterPos err=0 currentPosition=0 05:49:35 FLIGetStepsRemaining err=0 RemainingSteps=0 05:49:35 Filter is already there-color wheel unchanged 05:49:35 Received message from Master: op=Shutter serial=2735 05:49:35 Shutter LASER close 05:49:35 Received message from Camera: op=State serial=2737 05:49:35 GetSingleValue result=40 Value=cccccccc 05:49:35 SkyScan query 05:49:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:49:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:36 Parameters OK 05:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:36 Set A/D data flow result=40 05:49:36 Set A/D channel type result=40 05:49:36 Set A/D encoding result=40 05:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:36 Set channel filter=0.000000e+000 result=40 05:49:36 Config A/D Result=40 05:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:36 Get A/D filter: -9.255963e+061 result=40 05:49:36 Get A/D value=-858993460 result=40 05:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:49:36 Parameters OK 05:49:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:49:36 Set A/D data flow result=40 05:49:36 Set A/D channel type result=40 05:49:36 Set A/D encoding result=40 05:49:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:49:36 Set channel filter=0.000000e+000 result=40 05:49:36 Config A/D Result=40 05:49:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:49:36 Get A/D filter: -9.255963e+061 result=40 05:49:36 Get A/D value=-858993460 result=40 05:49:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:49:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:49:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:49:36 Aux= 05:49:36 Message to Camera, serial 2737 queued 05:50:07 Received message from Master: op=PointingHead serial=2744 05:50:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:50:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:50:07 Point started: ret=0 05:50:07 point_skyscan result=0 05:50:08 Check angles 05:50:08 SkyScan query 05:50:09 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.375<-13425 Statuses=0009 0009 05:50:09 Msec=0 True Az=152.655 Ze=-21.375 Az status=0009 Ze status=0009 05:50:09 Check angles 05:50:09 SkyScan query 05:50:09 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.42<-12028 Statuses=0009 0009 05:50:09 Msec=750 True Az=135.165 Ze=-0.42 Az status=0009 Ze status=0009 05:50:09 Check angles 05:50:09 SkyScan query 05:50:10 SkyScan query done: ret=0 az=117.57<-7838 ze=20.565<-10629 Statuses=0009 0009 05:50:10 Msec=1500 True Az=117.57 Ze=20.565 Az status=0009 Ze status=0009 05:50:10 Check angles 05:50:10 SkyScan query 05:50:11 SkyScan query done: ret=0 az=100.17<-6678 ze=41.52<-9232 Statuses=0009 0009 05:50:11 Msec=2250 True Az=100.17 Ze=41.52 Az status=0009 Ze status=0009 05:50:11 Check angles 05:50:11 SkyScan query 05:50:12 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 05:50:12 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 05:50:12 Check angles 05:50:12 SkyScan query 05:50:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:50:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:50:12 Message to Master queued w/err=0: serial=2744 error=0 05:50:17 Received message from Master: op=Filter serial=2745 05:50:17 Color wheel filter change from 0 to 0 05:50:17 FLIGetFilterPos err=0 currentPosition=0 05:50:17 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:17 Filter is already there-color wheel unchanged 05:50:17 Received message from Master: op=Shutter serial=2746 05:50:17 Shutter LASER close 05:50:17 Received message from Camera: op=State serial=2748 05:50:17 GetSingleValue result=40 Value=cccccccc 05:50:17 SkyScan query 05:50:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:50:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:18 Parameters OK 05:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:18 Set A/D data flow result=40 05:50:18 Set A/D channel type result=40 05:50:18 Set A/D encoding result=40 05:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:18 Set channel filter=0.000000e+000 result=40 05:50:18 Config A/D Result=40 05:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:18 Get A/D filter: -9.255963e+061 result=40 05:50:18 Get A/D value=-858993460 result=40 05:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:50:18 Parameters OK 05:50:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:50:18 Set A/D data flow result=40 05:50:18 Set A/D channel type result=40 05:50:18 Set A/D encoding result=40 05:50:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:50:18 Set channel filter=0.000000e+000 result=40 05:50:18 Config A/D Result=40 05:50:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:50:18 Get A/D filter: -9.255963e+061 result=40 05:50:18 Get A/D value=-858993460 result=40 05:50:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:50:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:50:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:50:18 Aux= 05:50:18 Message to Camera, serial 2748 queued 05:50:49 Received message from Master: op=PointingHead serial=2755 05:50:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:50:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:50:49 Point started: ret=0 05:50:49 point_skyscan result=0 05:50:50 Check angles 05:50:50 SkyScan query 05:50:51 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 05:50:51 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 05:50:51 Check angles 05:50:51 SkyScan query 05:50:51 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 05:50:51 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 05:50:52 Check angles 05:50:52 SkyScan query 05:50:52 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 05:50:52 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 05:50:52 Check angles 05:50:52 SkyScan query 05:50:53 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 05:50:53 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 05:50:53 Check angles 05:50:53 SkyScan query 05:50:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 05:50:54 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 05:50:54 Check angles 05:50:54 SkyScan query 05:50:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:50:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:50:54 Message to Master queued w/err=0: serial=2755 error=0 05:50:59 Received message from Master: op=Filter serial=2756 05:50:59 Color wheel filter change from 0 to 0 05:50:59 FLIGetFilterPos err=0 currentPosition=0 05:50:59 FLIGetStepsRemaining err=0 RemainingSteps=0 05:50:59 Filter is already there-color wheel unchanged 05:51:00 Received message from Master: op=Shutter serial=2757 05:51:00 Shutter LASER close 05:51:00 Received message from Camera: op=State serial=2759 05:51:00 GetSingleValue result=40 Value=cccccccc 05:51:00 SkyScan query 05:51:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:51:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:00 Parameters OK 05:51:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:00 Set A/D data flow result=40 05:51:00 Set A/D channel type result=40 05:51:00 Set A/D encoding result=40 05:51:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:00 Set channel filter=0.000000e+000 result=40 05:51:00 Config A/D Result=40 05:51:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:00 Get A/D filter: -9.255963e+061 result=40 05:51:00 Get A/D value=-858993460 result=40 05:51:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:00 Parameters OK 05:51:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:00 Set A/D data flow result=40 05:51:00 Set A/D channel type result=40 05:51:00 Set A/D encoding result=40 05:51:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:00 Set channel filter=0.000000e+000 result=40 05:51:00 Config A/D Result=40 05:51:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:00 Get A/D filter: -9.255963e+061 result=40 05:51:00 Get A/D value=-858993460 result=40 05:51:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:00 Aux= 05:51:00 Message to Camera, serial 2759 queued 05:51:31 Received message from Master: op=PointingHead serial=2766 05:51:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:51:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:51:31 Point started: ret=0 05:51:31 point_skyscan result=0 05:51:32 Check angles 05:51:32 SkyScan query 05:51:33 SkyScan query done: ret=0 az=153.195<-10213 ze=8.91<-11406 Statuses=0009 0009 05:51:33 Msec=0 True Az=153.195 Ze=8.91 Az status=0009 Ze status=0009 05:51:33 Check angles 05:51:33 SkyScan query 05:51:33 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.465<-12831 Statuses=0009 0009 05:51:33 Msec=750 True Az=135.39 Ze=-12.465 Az status=0009 Ze status=0009 05:51:34 Check angles 05:51:34 SkyScan query 05:51:34 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.405<-14227 Statuses=0009 0009 05:51:34 Msec=1500 True Az=117.84 Ze=-33.405 Az status=0009 Ze status=0009 05:51:34 Check angles 05:51:34 SkyScan query 05:51:35 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.54<-15436 Statuses=0009 0009 05:51:35 Msec=2250 True Az=100.455 Ze=-51.54 Az status=0009 Ze status=0009 05:51:35 Check angles 05:51:35 SkyScan query 05:51:36 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 05:51:36 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 05:51:36 Check angles 05:51:36 SkyScan query 05:51:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:51:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:51:36 Message to Master queued w/err=0: serial=2766 error=0 05:51:41 Received message from Master: op=Filter serial=2767 05:51:41 Color wheel filter change from 0 to 0 05:51:41 FLIGetFilterPos err=0 currentPosition=0 05:51:41 FLIGetStepsRemaining err=0 RemainingSteps=0 05:51:41 Filter is already there-color wheel unchanged 05:51:42 Received message from Master: op=Shutter serial=2768 05:51:42 Shutter LASER close 05:51:42 Received message from Camera: op=State serial=2770 05:51:42 GetSingleValue result=40 Value=cccccccc 05:51:42 SkyScan query 05:51:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:51:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:42 Parameters OK 05:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:42 Set A/D data flow result=40 05:51:42 Set A/D channel type result=40 05:51:42 Set A/D encoding result=40 05:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:42 Set channel filter=0.000000e+000 result=40 05:51:42 Config A/D Result=40 05:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:42 Get A/D filter: -9.255963e+061 result=40 05:51:42 Get A/D value=-858993460 result=40 05:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:51:42 Parameters OK 05:51:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:51:42 Set A/D data flow result=40 05:51:42 Set A/D channel type result=40 05:51:42 Set A/D encoding result=40 05:51:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:51:42 Set channel filter=0.000000e+000 result=40 05:51:42 Config A/D Result=40 05:51:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:51:42 Get A/D filter: -9.255963e+061 result=40 05:51:42 Get A/D value=-858993460 result=40 05:51:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:51:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:51:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:51:42 Aux= 05:51:42 Message to Camera, serial 2770 queued 05:51:49 Received message from Master: op=Identify serial=2771 [UTC 2018-12-4 05:52:09] 05:52:13 Received message from Master: op=PointingHead serial=2780 05:52:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:52:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:52:13 Point started: ret=0 05:52:13 point_skyscan result=0 05:52:14 Check angles 05:52:14 SkyScan query 05:52:15 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.78<-17452 Statuses=0009 0009 05:52:15 Msec=0 True Az=109.38 Ze=-81.78 Az status=0009 Ze status=0009 05:52:15 Check angles 05:52:15 SkyScan query 05:52:16 SkyScan query done: ret=0 az=113.01<-7534 ze=-103.155<-18877 Statuses=0008 0009 05:52:16 Msec=750 True Az=113.01 Ze=-103.155 Az status=0008 Ze status=0009 05:52:16 Check angles 05:52:16 SkyScan query 05:52:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.095<-20273 Statuses=0008 0009 05:52:16 Msec=1500 True Az=112.995 Ze=-124.095 Az status=0008 Ze status=0009 05:52:16 Check angles 05:52:16 SkyScan query 05:52:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.05<-21670 Statuses=0008 0009 05:52:17 Msec=2250 True Az=112.995 Ze=-145.05 Az status=0008 Ze status=0009 05:52:17 Check angles 05:52:17 SkyScan query 05:52:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 05:52:18 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 05:52:18 Check angles 05:52:18 SkyScan query 05:52:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:52:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:52:19 Message to Master queued w/err=0: serial=2780 error=0 05:52:24 Received message from Master: op=Filter serial=2781 05:52:24 Color wheel filter change from 0 to 0 05:52:24 FLIGetFilterPos err=0 currentPosition=0 05:52:24 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:24 Filter is already there-color wheel unchanged 05:52:24 Received message from Master: op=Shutter serial=2782 05:52:24 Shutter LASER open 05:52:24 Received message from Camera: op=State serial=2784 05:52:24 GetSingleValue result=40 Value=cccccccc 05:52:24 SkyScan query 05:52:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:52:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:24 Parameters OK 05:52:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:24 Set A/D data flow result=40 05:52:24 Set A/D channel type result=40 05:52:24 Set A/D encoding result=40 05:52:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:24 Set channel filter=0.000000e+000 result=40 05:52:24 Config A/D Result=40 05:52:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:24 Get A/D filter: -9.255963e+061 result=40 05:52:24 Get A/D value=-858993460 result=40 05:52:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:24 Parameters OK 05:52:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:24 Set A/D data flow result=40 05:52:24 Set A/D channel type result=40 05:52:24 Set A/D encoding result=40 05:52:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:24 Set channel filter=0.000000e+000 result=40 05:52:24 Config A/D Result=40 05:52:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:24 Get A/D filter: -9.255963e+061 result=40 05:52:24 Get A/D value=-858993460 result=40 05:52:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:24 Aux= 05:52:24 Message to Camera, serial 2784 queued 05:52:27 Received message from Master: op=Shutter serial=2788 05:52:27 Shutter LASER close 05:52:27 Received message from Master: op=PointingHead serial=2792 05:52:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:52:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:52:28 Point started: ret=0 05:52:28 point_skyscan result=0 05:52:28 Check angles 05:52:28 SkyScan query 05:52:29 SkyScan query done: ret=0 az=89.865<-5991 ze=157.44<-1504 Statuses=0009 0009 05:52:29 Msec=0 True Az=89.865 Ze=157.44 Az status=0009 Ze status=0009 05:52:29 Check angles 05:52:29 SkyScan query 05:52:30 SkyScan query done: ret=0 az=72.03<-4802 ze=135.93<-2938 Statuses=0009 0009 05:52:30 Msec=750 True Az=72.03 Ze=135.93 Az status=0009 Ze status=0009 05:52:30 Check angles 05:52:30 SkyScan query 05:52:31 SkyScan query done: ret=0 az=54.405<-3627 ze=114.66<-4356 Statuses=0009 0009 05:52:31 Msec=1500 True Az=54.405 Ze=114.66 Az status=0009 Ze status=0009 05:52:31 Check angles 05:52:31 SkyScan query 05:52:31 SkyScan query done: ret=0 az=40.905<-2727 ze=93.705<-5753 Statuses=0009 0009 05:52:31 Msec=2250 True Az=40.905 Ze=93.705 Az status=0009 Ze status=0009 05:52:31 Check angles 05:52:31 SkyScan query 05:52:32 SkyScan query done: ret=0 az=40.995<-2733 ze=72.285<-7181 Statuses=0008 0009 05:52:32 Msec=3000 True Az=40.995 Ze=72.285 Az status=0008 Ze status=0009 05:52:32 Check angles 05:52:32 SkyScan query 05:52:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.02<-8532 Statuses=0008 0009 05:52:33 Msec=3750 True Az=40.995 Ze=52.02 Az status=0008 Ze status=0009 05:52:33 Check angles 05:52:33 SkyScan query 05:52:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:52:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:52:34 Message to Master queued w/err=0: serial=2792 error=0 05:52:39 Received message from Master: op=Filter serial=2793 05:52:39 Color wheel filter change from 0 to 0 05:52:39 FLIGetFilterPos err=0 currentPosition=0 05:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 05:52:39 Filter is already there-color wheel unchanged 05:52:39 Received message from Master: op=Shutter serial=2794 05:52:39 Shutter LASER close 05:52:39 Received message from Camera: op=State serial=2796 05:52:39 GetSingleValue result=40 Value=cccccccc 05:52:39 SkyScan query 05:52:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:39 Parameters OK 05:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:39 Set A/D data flow result=40 05:52:39 Set A/D channel type result=40 05:52:39 Set A/D encoding result=40 05:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:39 Set channel filter=0.000000e+000 result=40 05:52:39 Config A/D Result=40 05:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:39 Get A/D filter: -9.255963e+061 result=40 05:52:39 Get A/D value=-858993460 result=40 05:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:52:39 Parameters OK 05:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:52:39 Set A/D data flow result=40 05:52:39 Set A/D channel type result=40 05:52:39 Set A/D encoding result=40 05:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:52:39 Set channel filter=0.000000e+000 result=40 05:52:39 Config A/D Result=40 05:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:52:39 Get A/D filter: -9.255963e+061 result=40 05:52:39 Get A/D value=-858993460 result=40 05:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:52:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:52:39 Aux= 05:52:39 Message to Camera, serial 2796 queued 05:53:10 Received message from Master: op=PointingHead serial=2803 05:53:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:53:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:53:11 Point started: ret=0 05:53:11 point_skyscan result=0 05:53:11 Check angles 05:53:11 SkyScan query 05:53:12 SkyScan query done: ret=0 az=64.065<-4271 ze=66.555<-7563 Statuses=0009 0008 05:53:12 Msec=0 True Az=64.065 Ze=66.555 Az status=0009 Ze status=0008 05:53:12 Check angles 05:53:12 SkyScan query 05:53:13 SkyScan query done: ret=0 az=81.57<-5438 ze=66.495<-7567 Statuses=0009 0008 05:53:13 Msec=750 True Az=81.57 Ze=66.495 Az status=0009 Ze status=0008 05:53:13 Check angles 05:53:13 SkyScan query 05:53:14 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 05:53:14 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 05:53:14 Check angles 05:53:14 SkyScan query 05:53:14 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 05:53:14 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 05:53:14 Check angles 05:53:14 SkyScan query 05:53:15 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 05:53:15 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 05:53:15 Check angles 05:53:15 SkyScan query 05:53:16 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 05:53:16 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 05:53:16 Check angles 05:53:16 SkyScan query 05:53:17 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:53:17 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:53:17 Message to Master queued w/err=0: serial=2803 error=0 05:53:22 Received message from Master: op=Filter serial=2804 05:53:22 Color wheel filter change from 0 to 0 05:53:22 FLIGetFilterPos err=0 currentPosition=0 05:53:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:53:22 Filter is already there-color wheel unchanged 05:53:22 Received message from Master: op=Shutter serial=2805 05:53:22 Shutter LASER close 05:53:22 Received message from Camera: op=State serial=2807 05:53:22 GetSingleValue result=40 Value=cccccccc 05:53:22 SkyScan query 05:53:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:53:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:22 Parameters OK 05:53:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:22 Set A/D data flow result=40 05:53:22 Set A/D channel type result=40 05:53:22 Set A/D encoding result=40 05:53:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:22 Set channel filter=0.000000e+000 result=40 05:53:22 Config A/D Result=40 05:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:22 Get A/D filter: -9.255963e+061 result=40 05:53:22 Get A/D value=-858993460 result=40 05:53:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:53:22 Parameters OK 05:53:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:53:22 Set A/D data flow result=40 05:53:22 Set A/D channel type result=40 05:53:22 Set A/D encoding result=40 05:53:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:53:22 Set channel filter=0.000000e+000 result=40 05:53:22 Config A/D Result=40 05:53:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:53:22 Get A/D filter: -9.255963e+061 result=40 05:53:22 Get A/D value=-858993460 result=40 05:53:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:53:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:53:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:53:22 Aux= 05:53:22 Message to Camera, serial 2807 queued 05:53:53 Received message from Master: op=PointingHead serial=2814 05:53:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:53:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:53:54 Point started: ret=0 05:53:54 point_skyscan result=0 05:53:54 Check angles 05:53:54 SkyScan query 05:53:55 SkyScan query done: ret=0 az=134.745<-8983 ze=36.345<-9577 Statuses=0009 0009 05:53:55 Msec=0 True Az=134.745 Ze=36.345 Az status=0009 Ze status=0009 05:53:55 Check angles 05:53:55 SkyScan query 05:53:56 SkyScan query done: ret=0 az=117.09<-7806 ze=15.39<-10974 Statuses=0009 0009 05:53:56 Msec=750 True Az=117.09 Ze=15.39 Az status=0009 Ze status=0009 05:53:56 Check angles 05:53:56 SkyScan query 05:53:56 SkyScan query done: ret=0 az=99.435<-6629 ze=-6.015<-12401 Statuses=0009 0009 05:53:56 Msec=1500 True Az=99.435 Ze=-6.015 Az status=0009 Ze status=0009 05:53:57 Check angles 05:53:57 SkyScan query 05:53:57 SkyScan query done: ret=0 az=81.96<-5464 ze=-26.955<-13797 Statuses=0009 0009 05:53:57 Msec=2250 True Az=81.96 Ze=-26.955 Az status=0009 Ze status=0009 05:53:57 Check angles 05:53:57 SkyScan query 05:53:58 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 05:53:58 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 05:53:58 Check angles 05:53:58 SkyScan query 05:53:59 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.52<-14568 Statuses=0009 0008 05:53:59 Msec=3750 True Az=47.04 Ze=-38.52 Az status=0009 Ze status=0008 05:53:59 Check angles 05:53:59 SkyScan query 05:53:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:53:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 05:53:59 Message to Master queued w/err=0: serial=2814 error=0 05:54:04 Received message from Master: op=Filter serial=2815 05:54:04 Color wheel filter change from 0 to 0 05:54:04 FLIGetFilterPos err=0 currentPosition=0 05:54:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:04 Filter is already there-color wheel unchanged 05:54:05 Received message from Master: op=Shutter serial=2816 05:54:05 Shutter LASER close 05:54:05 Received message from Camera: op=State serial=2818 05:54:05 GetSingleValue result=40 Value=cccccccc 05:54:05 SkyScan query 05:54:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 05:54:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:05 Parameters OK 05:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:05 Set A/D data flow result=40 05:54:05 Set A/D channel type result=40 05:54:05 Set A/D encoding result=40 05:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:05 Set channel filter=0.000000e+000 result=40 05:54:05 Config A/D Result=40 05:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:05 Get A/D filter: -9.255963e+061 result=40 05:54:05 Get A/D value=-858993460 result=40 05:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:05 Parameters OK 05:54:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:05 Set A/D data flow result=40 05:54:05 Set A/D channel type result=40 05:54:05 Set A/D encoding result=40 05:54:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:05 Set channel filter=0.000000e+000 result=40 05:54:05 Config A/D Result=40 05:54:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:05 Get A/D filter: -9.255963e+061 result=40 05:54:05 Get A/D value=-858993460 result=40 05:54:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:05 Aux= 05:54:05 Message to Camera, serial 2818 queued 05:54:36 Received message from Master: op=PointingHead serial=2825 05:54:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 05:54:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 05:54:36 Point started: ret=0 05:54:36 point_skyscan result=0 05:54:37 Check angles 05:54:37 SkyScan query 05:54:38 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.175<-16545 Statuses=0009 0009 05:54:38 Msec=0 True Az=63.795 Ze=-68.175 Az status=0009 Ze status=0009 05:54:38 Check angles 05:54:38 SkyScan query 05:54:39 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.145<-17943 Statuses=0009 0009 05:54:39 Msec=750 True Az=81.33 Ze=-89.145 Az status=0009 Ze status=0009 05:54:39 Check angles 05:54:39 SkyScan query 05:54:39 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.07<-19338 Statuses=0009 0009 05:54:39 Msec=1500 True Az=98.94 Ze=-110.07 Az status=0009 Ze status=0009 05:54:39 Check angles 05:54:39 SkyScan query 05:54:40 SkyScan query done: ret=0 az=116.355<-7757 ze=-131.04<-20736 Statuses=0009 0009 05:54:40 Msec=2250 True Az=116.355 Ze=-131.04 Az status=0009 Ze status=0009 05:54:40 Check angles 05:54:40 SkyScan query 05:54:41 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 05:54:41 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 05:54:41 Check angles 05:54:41 SkyScan query 05:54:42 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 05:54:42 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 05:54:42 Message to Master queued w/err=0: serial=2825 error=0 05:54:47 Received message from Master: op=Filter serial=2826 05:54:47 Color wheel filter change from 0 to 0 05:54:47 FLIGetFilterPos err=0 currentPosition=0 05:54:47 FLIGetStepsRemaining err=0 RemainingSteps=0 05:54:47 Filter is already there-color wheel unchanged 05:54:47 Received message from Master: op=Shutter serial=2827 05:54:47 Shutter LASER close 05:54:47 Received message from Camera: op=State serial=2829 05:54:47 GetSingleValue result=40 Value=cccccccc 05:54:47 SkyScan query 05:54:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 05:54:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:47 Parameters OK 05:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:47 Set A/D data flow result=40 05:54:47 Set A/D channel type result=40 05:54:47 Set A/D encoding result=40 05:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:47 Set channel filter=0.000000e+000 result=40 05:54:47 Config A/D Result=40 05:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:47 Get A/D filter: -9.255963e+061 result=40 05:54:47 Get A/D value=-858993460 result=40 05:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:54:47 Parameters OK 05:54:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:54:47 Set A/D data flow result=40 05:54:47 Set A/D channel type result=40 05:54:47 Set A/D encoding result=40 05:54:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:54:47 Set channel filter=0.000000e+000 result=40 05:54:47 Config A/D Result=40 05:54:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:54:47 Get A/D filter: -9.255963e+061 result=40 05:54:47 Get A/D value=-858993460 result=40 05:54:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:54:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:54:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:54:47 Aux= 05:54:47 Message to Camera, serial 2829 queued 05:55:18 Received message from Master: op=PointingHead serial=2836 05:55:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:55:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:55:19 Point started: ret=0 05:55:19 point_skyscan result=0 05:55:19 Check angles 05:55:19 SkyScan query 05:55:20 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.925<-23395 Statuses=0009 0009 05:55:20 Msec=0 True Az=113.025 Ze=-170.925 Az status=0009 Ze status=0009 05:55:20 Check angles 05:55:20 SkyScan query 05:55:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 05:55:21 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 05:55:21 Message to Master queued w/err=0: serial=2836 error=0 05:55:26 Received message from Master: op=Filter serial=2837 05:55:26 Color wheel filter change from 0 to 0 05:55:26 FLIGetFilterPos err=0 currentPosition=0 05:55:26 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:26 Filter is already there-color wheel unchanged 05:55:26 Received message from Master: op=Shutter serial=2838 05:55:26 Shutter LASER open 05:55:26 Received message from Camera: op=State serial=2840 05:55:26 GetSingleValue result=40 Value=cccccccc 05:55:26 SkyScan query 05:55:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:55:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:27 Parameters OK 05:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:27 Set A/D data flow result=40 05:55:27 Set A/D channel type result=40 05:55:27 Set A/D encoding result=40 05:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:27 Set channel filter=0.000000e+000 result=40 05:55:27 Config A/D Result=40 05:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:27 Get A/D filter: -9.255963e+061 result=40 05:55:27 Get A/D value=-858993460 result=40 05:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:27 Parameters OK 05:55:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:27 Set A/D data flow result=40 05:55:27 Set A/D channel type result=40 05:55:27 Set A/D encoding result=40 05:55:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:27 Set channel filter=0.000000e+000 result=40 05:55:27 Config A/D Result=40 05:55:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:27 Get A/D filter: -9.255963e+061 result=40 05:55:27 Get A/D value=-858993460 result=40 05:55:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:27 Aux= 05:55:27 Message to Camera, serial 2840 queued 05:55:29 Received message from Master: op=Shutter serial=2844 05:55:29 Shutter LASER close 05:55:30 Received message from Master: op=PointingHead serial=2848 05:55:30 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 05:55:30 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 05:55:30 Point started: ret=0 05:55:30 point_skyscan result=0 05:55:31 Check angles 05:55:31 SkyScan query 05:55:31 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.415<-21561 Statuses=0009 0009 05:55:31 Msec=0 True Az=135.765 Ze=-143.415 Az status=0009 Ze status=0009 05:55:31 Check angles 05:55:31 SkyScan query 05:55:32 SkyScan query done: ret=0 az=153.285<-10219 ze=-122.46<-20164 Statuses=0009 0009 05:55:32 Msec=750 True Az=153.285 Ze=-122.46 Az status=0009 Ze status=0009 05:55:32 Check angles 05:55:32 SkyScan query 05:55:33 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.43<-18762 Statuses=0009 0009 05:55:33 Msec=1500 True Az=170.775 Ze=-101.43 Az status=0009 Ze status=0009 05:55:33 Check angles 05:55:33 SkyScan query 05:55:34 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.55<-17370 Statuses=0008 0009 05:55:34 Msec=2250 True Az=176.025 Ze=-80.55 Az status=0008 Ze status=0009 05:55:34 Check angles 05:55:34 SkyScan query 05:55:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.16<-15944 Statuses=0008 0009 05:55:34 Msec=3000 True Az=175.995 Ze=-59.16 Az status=0008 Ze status=0009 05:55:34 Check angles 05:55:34 SkyScan query 05:55:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 05:55:35 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 05:55:35 Message to Master queued w/err=0: serial=2848 error=0 05:55:40 Received message from Master: op=Filter serial=2849 05:55:40 Color wheel filter change from 0 to 0 05:55:40 FLIGetFilterPos err=0 currentPosition=0 05:55:40 FLIGetStepsRemaining err=0 RemainingSteps=0 05:55:40 Filter is already there-color wheel unchanged 05:55:40 Received message from Master: op=Shutter serial=2850 05:55:40 Shutter LASER close 05:55:40 Received message from Camera: op=State serial=2852 05:55:40 GetSingleValue result=40 Value=cccccccc 05:55:40 SkyScan query 05:55:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 05:55:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:41 Parameters OK 05:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:41 Set A/D data flow result=40 05:55:41 Set A/D channel type result=40 05:55:41 Set A/D encoding result=40 05:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:41 Set channel filter=0.000000e+000 result=40 05:55:41 Config A/D Result=40 05:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:41 Get A/D filter: -9.255963e+061 result=40 05:55:41 Get A/D value=-858993460 result=40 05:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:55:41 Parameters OK 05:55:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:55:41 Set A/D data flow result=40 05:55:41 Set A/D channel type result=40 05:55:41 Set A/D encoding result=40 05:55:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:55:41 Set channel filter=0.000000e+000 result=40 05:55:41 Config A/D Result=40 05:55:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:55:41 Get A/D filter: -9.255963e+061 result=40 05:55:41 Get A/D value=-858993460 result=40 05:55:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:55:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:55:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:55:41 Aux= 05:55:41 Message to Camera, serial 2852 queued 05:56:12 Received message from Master: op=PointingHead serial=2859 05:56:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 05:56:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 05:56:12 Point started: ret=0 05:56:12 point_skyscan result=0 05:56:13 Check angles 05:56:13 SkyScan query 05:56:13 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.885<-13459 Statuses=0009 0009 05:56:13 Msec=0 True Az=153.12 Ze=-21.885 Az status=0009 Ze status=0009 05:56:14 Check angles 05:56:14 SkyScan query 05:56:14 SkyScan query done: ret=0 az=135.675<-9045 ze=-0.915<-12061 Statuses=0009 0009 05:56:14 Msec=750 True Az=135.675 Ze=-0.915 Az status=0009 Ze status=0009 05:56:14 Check angles 05:56:14 SkyScan query 05:56:15 SkyScan query done: ret=0 az=117.765<-7851 ze=20.49<-10634 Statuses=0009 0009 05:56:15 Msec=1500 True Az=117.765 Ze=20.49 Az status=0009 Ze status=0009 05:56:15 Check angles 05:56:15 SkyScan query 05:56:16 SkyScan query done: ret=0 az=100.38<-6692 ze=41.43<-9238 Statuses=0009 0009 05:56:16 Msec=2250 True Az=100.38 Ze=41.43 Az status=0009 Ze status=0009 05:56:16 Check angles 05:56:16 SkyScan query 05:56:16 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 05:56:16 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 05:56:17 Check angles 05:56:17 SkyScan query 05:56:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 05:56:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 05:56:17 Message to Master queued w/err=0: serial=2859 error=0 05:56:22 Received message from Master: op=Filter serial=2860 05:56:22 Color wheel filter change from 0 to 0 05:56:22 FLIGetFilterPos err=0 currentPosition=0 05:56:22 FLIGetStepsRemaining err=0 RemainingSteps=0 05:56:22 Filter is already there-color wheel unchanged 05:56:22 Received message from Master: op=Shutter serial=2861 05:56:22 Shutter LASER close 05:56:22 Received message from Camera: op=State serial=2863 05:56:22 GetSingleValue result=40 Value=cccccccc 05:56:22 SkyScan query 05:56:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 05:56:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:23 Parameters OK 05:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:23 Set A/D data flow result=40 05:56:23 Set A/D channel type result=40 05:56:23 Set A/D encoding result=40 05:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:23 Set channel filter=0.000000e+000 result=40 05:56:23 Config A/D Result=40 05:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:23 Get A/D filter: -9.255963e+061 result=40 05:56:23 Get A/D value=-858993460 result=40 05:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:56:23 Parameters OK 05:56:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:56:23 Set A/D data flow result=40 05:56:23 Set A/D channel type result=40 05:56:23 Set A/D encoding result=40 05:56:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:56:23 Set channel filter=0.000000e+000 result=40 05:56:23 Config A/D Result=40 05:56:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:56:23 Get A/D filter: -9.255963e+061 result=40 05:56:23 Get A/D value=-858993460 result=40 05:56:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:56:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:56:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:56:23 Aux= 05:56:23 Message to Camera, serial 2863 queued 05:56:54 Received message from Master: op=PointingHead serial=2870 05:56:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 05:56:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 05:56:54 Point started: ret=0 05:56:54 point_skyscan result=0 05:56:55 Check angles 05:56:55 SkyScan query 05:56:56 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 05:56:56 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 05:56:56 Check angles 05:56:56 SkyScan query 05:56:56 SkyScan query done: ret=0 az=126.21<-8414 ze=38.505<-9433 Statuses=0009 0008 05:56:56 Msec=750 True Az=126.21 Ze=38.505 Az status=0009 Ze status=0008 05:56:56 Check angles 05:56:56 SkyScan query 05:56:57 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 05:56:57 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 05:56:57 Check angles 05:56:57 SkyScan query 05:56:58 SkyScan query done: ret=0 az=161.025<-10735 ze=38.505<-9433 Statuses=0009 0008 05:56:58 Msec=2250 True Az=161.025 Ze=38.505 Az status=0009 Ze status=0008 05:56:58 Check angles 05:56:58 SkyScan query 05:56:59 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 05:56:59 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 05:56:59 Check angles 05:56:59 SkyScan query 05:56:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 05:56:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 05:56:59 Message to Master queued w/err=0: serial=2870 error=0 05:57:04 Received message from Master: op=Filter serial=2871 05:57:04 Color wheel filter change from 0 to 0 05:57:04 FLIGetFilterPos err=0 currentPosition=0 05:57:04 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:04 Filter is already there-color wheel unchanged 05:57:04 Received message from Master: op=Shutter serial=2872 05:57:04 Shutter LASER close 05:57:05 Received message from Camera: op=State serial=2874 05:57:05 GetSingleValue result=40 Value=cccccccc 05:57:05 SkyScan query 05:57:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 05:57:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:05 Parameters OK 05:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:05 Set A/D data flow result=40 05:57:05 Set A/D channel type result=40 05:57:05 Set A/D encoding result=40 05:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:05 Set channel filter=0.000000e+000 result=40 05:57:05 Config A/D Result=40 05:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:05 Get A/D filter: -9.255963e+061 result=40 05:57:05 Get A/D value=-858993460 result=40 05:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:05 Parameters OK 05:57:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:05 Set A/D data flow result=40 05:57:05 Set A/D channel type result=40 05:57:05 Set A/D encoding result=40 05:57:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:05 Set channel filter=0.000000e+000 result=40 05:57:05 Config A/D Result=40 05:57:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:05 Get A/D filter: -9.255963e+061 result=40 05:57:05 Get A/D value=-858993460 result=40 05:57:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:05 Aux= 05:57:05 Message to Camera, serial 2874 queued 05:57:36 Received message from Master: op=PointingHead serial=2881 05:57:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 05:57:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 05:57:36 Point started: ret=0 05:57:36 point_skyscan result=0 05:57:37 Check angles 05:57:37 SkyScan query 05:57:38 SkyScan query done: ret=0 az=152.97<-10198 ze=8.535<-11431 Statuses=0009 0009 05:57:38 Msec=0 True Az=152.97 Ze=8.535 Az status=0009 Ze status=0009 05:57:38 Check angles 05:57:38 SkyScan query 05:57:38 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.33<-12822 Statuses=0009 0009 05:57:38 Msec=750 True Az=135.465 Ze=-12.33 Az status=0009 Ze status=0009 05:57:39 Check angles 05:57:39 SkyScan query 05:57:39 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.72<-14248 Statuses=0009 0009 05:57:39 Msec=1500 True Az=117.63 Ze=-33.72 Az status=0009 Ze status=0009 05:57:39 Check angles 05:57:39 SkyScan query 05:57:40 SkyScan query done: ret=0 az=99.735<-6649 ze=-51.54<-15436 Statuses=0009 0009 05:57:40 Msec=2250 True Az=99.735 Ze=-51.54 Az status=0009 Ze status=0009 05:57:40 Check angles 05:57:40 SkyScan query 05:57:41 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 05:57:41 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 05:57:41 Check angles 05:57:41 SkyScan query 05:57:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:57:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 05:57:41 Message to Master queued w/err=0: serial=2881 error=0 05:57:46 Received message from Master: op=Filter serial=2882 05:57:46 Color wheel filter change from 0 to 0 05:57:46 FLIGetFilterPos err=0 currentPosition=0 05:57:46 FLIGetStepsRemaining err=0 RemainingSteps=0 05:57:46 Filter is already there-color wheel unchanged 05:57:47 Received message from Master: op=Shutter serial=2883 05:57:47 Shutter LASER close 05:57:47 Received message from Camera: op=State serial=2885 05:57:47 GetSingleValue result=40 Value=cccccccc 05:57:47 SkyScan query 05:57:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 05:57:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:47 Parameters OK 05:57:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:47 Set A/D data flow result=40 05:57:47 Set A/D channel type result=40 05:57:47 Set A/D encoding result=40 05:57:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:47 Set channel filter=0.000000e+000 result=40 05:57:47 Config A/D Result=40 05:57:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:47 Get A/D filter: -9.255963e+061 result=40 05:57:47 Get A/D value=-858993460 result=40 05:57:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:57:47 Parameters OK 05:57:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:57:47 Set A/D data flow result=40 05:57:47 Set A/D channel type result=40 05:57:47 Set A/D encoding result=40 05:57:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:57:47 Set channel filter=0.000000e+000 result=40 05:57:47 Config A/D Result=40 05:57:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:57:47 Get A/D filter: -9.255963e+061 result=40 05:57:47 Get A/D value=-858993460 result=40 05:57:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:57:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:57:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:57:47 Aux= 05:57:47 Message to Camera, serial 2885 queued 05:58:18 Received message from Master: op=PointingHead serial=2892 05:58:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 05:58:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 05:58:18 Point started: ret=0 05:58:18 point_skyscan result=0 05:58:19 Check angles 05:58:19 SkyScan query 05:58:20 SkyScan query done: ret=0 az=109.41<-7294 ze=-81.585<-17439 Statuses=0009 0009 05:58:20 Msec=0 True Az=109.41 Ze=-81.585 Az status=0009 Ze status=0009 05:58:20 Check angles 05:58:20 SkyScan query 05:58:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 05:58:20 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 05:58:21 Check angles 05:58:21 SkyScan query 05:58:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 05:58:21 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 05:58:21 Check angles 05:58:21 SkyScan query 05:58:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 05:58:22 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 05:58:22 Check angles 05:58:22 SkyScan query 05:58:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 05:58:23 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 05:58:23 Check angles 05:58:23 SkyScan query 05:58:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 05:58:24 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 05:58:24 Message to Master queued w/err=0: serial=2892 error=0 05:58:29 Received message from Master: op=Filter serial=2893 05:58:29 Color wheel filter change from 0 to 0 05:58:29 FLIGetFilterPos err=0 currentPosition=0 05:58:29 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:29 Filter is already there-color wheel unchanged 05:58:29 Received message from Master: op=Shutter serial=2894 05:58:29 Shutter LASER open 05:58:29 Received message from Camera: op=State serial=2896 05:58:29 GetSingleValue result=40 Value=cccccccc 05:58:29 SkyScan query 05:58:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 05:58:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:29 Parameters OK 05:58:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:29 Set A/D data flow result=40 05:58:29 Set A/D channel type result=40 05:58:29 Set A/D encoding result=40 05:58:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:29 Set channel filter=0.000000e+000 result=40 05:58:29 Config A/D Result=40 05:58:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:29 Get A/D filter: -9.255963e+061 result=40 05:58:29 Get A/D value=-858993460 result=40 05:58:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:29 Parameters OK 05:58:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:29 Set A/D data flow result=40 05:58:29 Set A/D channel type result=40 05:58:29 Set A/D encoding result=40 05:58:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:29 Set channel filter=0.000000e+000 result=40 05:58:29 Config A/D Result=40 05:58:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:29 Get A/D filter: -9.255963e+061 result=40 05:58:29 Get A/D value=-858993460 result=40 05:58:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:29 Aux= 05:58:29 Message to Camera, serial 2896 queued 05:58:32 Received message from Master: op=Shutter serial=2900 05:58:32 Shutter LASER close 05:58:32 Received message from Master: op=PointingHead serial=2904 05:58:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 05:58:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 05:58:33 Point started: ret=0 05:58:33 point_skyscan result=0 05:58:33 Check angles 05:58:33 SkyScan query 05:58:34 SkyScan query done: ret=0 az=89.58<-5972 ze=156.96<-1536 Statuses=0009 0009 05:58:34 Msec=0 True Az=89.58 Ze=156.96 Az status=0009 Ze status=0009 05:58:34 Check angles 05:58:34 SkyScan query 05:58:35 SkyScan query done: ret=0 az=72.135<-4809 ze=135.99<-2934 Statuses=0009 0009 05:58:35 Msec=750 True Az=72.135 Ze=135.99 Az status=0009 Ze status=0009 05:58:35 Check angles 05:58:35 SkyScan query 05:58:35 SkyScan query done: ret=0 az=54.765<-3651 ze=115.065<-4329 Statuses=0009 0009 05:58:35 Msec=1500 True Az=54.765 Ze=115.065 Az status=0009 Ze status=0009 05:58:36 Check angles 05:58:36 SkyScan query 05:58:36 SkyScan query done: ret=0 az=40.86<-2724 ze=94.08<-5728 Statuses=0009 0009 05:58:36 Msec=2250 True Az=40.86 Ze=94.08 Az status=0009 Ze status=0009 05:58:36 Check angles 05:58:36 SkyScan query 05:58:37 SkyScan query done: ret=0 az=41.01<-2734 ze=73.14<-7124 Statuses=0008 0009 05:58:37 Msec=3000 True Az=41.01 Ze=73.14 Az status=0008 Ze status=0009 05:58:37 Check angles 05:58:37 SkyScan query 05:58:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 05:58:38 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 05:58:38 Check angles 05:58:38 SkyScan query 05:58:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 05:58:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 05:58:38 Message to Master queued w/err=0: serial=2904 error=0 05:58:43 Received message from Master: op=Filter serial=2905 05:58:43 Color wheel filter change from 0 to 0 05:58:43 FLIGetFilterPos err=0 currentPosition=0 05:58:43 FLIGetStepsRemaining err=0 RemainingSteps=0 05:58:43 Filter is already there-color wheel unchanged 05:58:44 Received message from Master: op=Shutter serial=2906 05:58:44 Shutter LASER close 05:58:44 Received message from Camera: op=State serial=2908 05:58:44 GetSingleValue result=40 Value=cccccccc 05:58:44 SkyScan query 05:58:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 05:58:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:44 Parameters OK 05:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:44 Set A/D data flow result=40 05:58:44 Set A/D channel type result=40 05:58:44 Set A/D encoding result=40 05:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:44 Set channel filter=0.000000e+000 result=40 05:58:44 Config A/D Result=40 05:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:44 Get A/D filter: -9.255963e+061 result=40 05:58:44 Get A/D value=-858993460 result=40 05:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:58:44 Parameters OK 05:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:58:44 Set A/D data flow result=40 05:58:44 Set A/D channel type result=40 05:58:44 Set A/D encoding result=40 05:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:58:44 Set channel filter=0.000000e+000 result=40 05:58:44 Config A/D Result=40 05:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:58:44 Get A/D filter: -9.255963e+061 result=40 05:58:44 Get A/D value=-858993460 result=40 05:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:58:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:58:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:58:44 Aux= 05:58:44 Message to Camera, serial 2908 queued 05:59:15 Received message from Master: op=PointingHead serial=2915 05:59:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 05:59:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 05:59:16 Point started: ret=0 05:59:16 point_skyscan result=0 05:59:16 Check angles 05:59:16 SkyScan query 05:59:17 SkyScan query done: ret=0 az=63.825<-4255 ze=66.54<-7564 Statuses=0009 0008 05:59:17 Msec=0 True Az=63.825 Ze=66.54 Az status=0009 Ze status=0008 05:59:17 Check angles 05:59:17 SkyScan query 05:59:18 SkyScan query done: ret=0 az=81.195<-5413 ze=66.51<-7566 Statuses=0009 0008 05:59:18 Msec=750 True Az=81.195 Ze=66.51 Az status=0009 Ze status=0008 05:59:18 Check angles 05:59:18 SkyScan query 05:59:19 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 05:59:19 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 05:59:19 Check angles 05:59:19 SkyScan query 05:59:19 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 05:59:19 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 05:59:19 Check angles 05:59:19 SkyScan query 05:59:20 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 05:59:20 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 05:59:20 Check angles 05:59:20 SkyScan query 05:59:21 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 05:59:21 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 05:59:21 Check angles 05:59:21 SkyScan query 05:59:22 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 05:59:22 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 05:59:22 Message to Master queued w/err=0: serial=2915 error=0 05:59:27 Received message from Master: op=Filter serial=2916 05:59:27 Color wheel filter change from 0 to 0 05:59:27 FLIGetFilterPos err=0 currentPosition=0 05:59:27 FLIGetStepsRemaining err=0 RemainingSteps=0 05:59:27 Filter is already there-color wheel unchanged 05:59:27 Received message from Master: op=Shutter serial=2917 05:59:27 Shutter LASER close 05:59:27 Received message from Camera: op=State serial=2919 05:59:27 GetSingleValue result=40 Value=cccccccc 05:59:27 SkyScan query 05:59:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 05:59:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:27 Parameters OK 05:59:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:27 Set A/D data flow result=40 05:59:27 Set A/D channel type result=40 05:59:27 Set A/D encoding result=40 05:59:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:27 Set channel filter=0.000000e+000 result=40 05:59:27 Config A/D Result=40 05:59:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:27 Get A/D filter: -9.255963e+061 result=40 05:59:27 Get A/D value=-858993460 result=40 05:59:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 05:59:27 Parameters OK 05:59:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 05:59:27 Set A/D data flow result=40 05:59:27 Set A/D channel type result=40 05:59:27 Set A/D encoding result=40 05:59:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 05:59:27 Set channel filter=0.000000e+000 result=40 05:59:27 Config A/D Result=40 05:59:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 05:59:27 Get A/D filter: -9.255963e+061 result=40 05:59:27 Get A/D value=-858993460 result=40 05:59:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 05:59:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 05:59:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 05:59:27 Aux= 05:59:27 Message to Camera, serial 2919 queued 05:59:58 Received message from Master: op=PointingHead serial=2926 05:59:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 05:59:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 05:59:59 Point started: ret=0 05:59:59 point_skyscan result=0 05:59:59 Check angles 05:59:59 SkyScan query 06:00:00 SkyScan query done: ret=0 az=134.805<-8987 ze=36.45<-9570 Statuses=0009 0009 06:00:00 Msec=0 True Az=134.805 Ze=36.45 Az status=0009 Ze status=0009 06:00:00 Check angles 06:00:00 SkyScan query 06:00:01 SkyScan query done: ret=0 az=116.88<-7792 ze=15.06<-10996 Statuses=0009 0009 06:00:01 Msec=750 True Az=116.88 Ze=15.06 Az status=0009 Ze status=0009 06:00:01 Check angles 06:00:01 SkyScan query 06:00:01 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.895<-12393 Statuses=0009 0009 06:00:01 Msec=1500 True Az=99.51 Ze=-5.895 Az status=0009 Ze status=0009 06:00:02 Check angles 06:00:02 SkyScan query 06:00:02 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.85<-13790 Statuses=0009 0009 06:00:02 Msec=2250 True Az=82.08 Ze=-26.85 Az status=0009 Ze status=0009 06:00:02 Check angles 06:00:02 SkyScan query 06:00:03 SkyScan query done: ret=0 az=64.26<-4284 ze=-38.565<-14571 Statuses=0009 0008 06:00:03 Msec=3000 True Az=64.26 Ze=-38.565 Az status=0009 Ze status=0008 06:00:03 Check angles 06:00:03 SkyScan query 06:00:04 SkyScan query done: ret=0 az=46.455<-3097 ze=-38.52<-14568 Statuses=0009 0008 06:00:04 Msec=3750 True Az=46.455 Ze=-38.52 Az status=0009 Ze status=0008 06:00:04 Check angles 06:00:04 SkyScan query 06:00:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:00:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:00:04 Message to Master queued w/err=0: serial=2926 error=0 06:00:09 Received message from Master: op=Filter serial=2927 06:00:09 Color wheel filter change from 0 to 0 06:00:09 FLIGetFilterPos err=0 currentPosition=0 06:00:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:09 Filter is already there-color wheel unchanged 06:00:10 Received message from Master: op=Shutter serial=2928 06:00:10 Shutter LASER close 06:00:10 Received message from Camera: op=State serial=2930 06:00:10 GetSingleValue result=40 Value=cccccccc 06:00:10 SkyScan query 06:00:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:00:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:10 Parameters OK 06:00:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:10 Set A/D data flow result=40 06:00:10 Set A/D channel type result=40 06:00:10 Set A/D encoding result=40 06:00:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:10 Set channel filter=0.000000e+000 result=40 06:00:10 Config A/D Result=40 06:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:10 Get A/D filter: -9.255963e+061 result=40 06:00:10 Get A/D value=-858993460 result=40 06:00:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:10 Parameters OK 06:00:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:10 Set A/D data flow result=40 06:00:10 Set A/D channel type result=40 06:00:10 Set A/D encoding result=40 06:00:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:10 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-4 06:00:10] 06:00:10 Config A/D Result=40 06:00:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:10 Get A/D filter: -9.255963e+061 result=40 06:00:10 Get A/D value=-858993460 result=40 06:00:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:10 Aux= 06:00:10 Message to Camera, serial 2930 queued 06:00:41 Received message from Master: op=PointingHead serial=2937 06:00:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:00:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:00:41 Point started: ret=0 06:00:41 point_skyscan result=0 06:00:42 Check angles 06:00:42 SkyScan query 06:00:43 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.805<-16587 Statuses=0009 0009 06:00:43 Msec=0 True Az=64.26 Ze=-68.805 Az status=0009 Ze status=0009 06:00:43 Check angles 06:00:43 SkyScan query 06:00:43 SkyScan query done: ret=0 az=82.02<-5468 ze=-89.76<-17984 Statuses=0009 0009 06:00:43 Msec=750 True Az=82.02 Ze=-89.76 Az status=0009 Ze status=0009 06:00:44 Check angles 06:00:44 SkyScan query 06:00:44 SkyScan query done: ret=0 az=99.435<-6629 ze=-110.7<-19380 Statuses=0009 0009 06:00:44 Msec=1500 True Az=99.435 Ze=-110.7 Az status=0009 Ze status=0009 06:00:44 Check angles 06:00:44 SkyScan query 06:00:45 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.09<-20806 Statuses=0009 0009 06:00:45 Msec=2250 True Az=117.18 Ze=-132.09 Az status=0009 Ze status=0009 06:00:45 Check angles 06:00:45 SkyScan query 06:00:46 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 06:00:46 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 06:00:46 Check angles 06:00:46 SkyScan query 06:00:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:00:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:00:46 Message to Master queued w/err=0: serial=2937 error=0 06:00:51 Received message from Master: op=Filter serial=2938 06:00:51 Color wheel filter change from 0 to 0 06:00:51 FLIGetFilterPos err=0 currentPosition=0 06:00:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:00:51 Filter is already there-color wheel unchanged 06:00:52 Received message from Master: op=Shutter serial=2939 06:00:52 Shutter LASER close 06:00:52 Received message from Camera: op=State serial=2941 06:00:52 GetSingleValue result=40 Value=cccccccc 06:00:52 SkyScan query 06:00:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:00:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:52 Parameters OK 06:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:52 Set A/D data flow result=40 06:00:52 Set A/D channel type result=40 06:00:52 Set A/D encoding result=40 06:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:52 Set channel filter=0.000000e+000 result=40 06:00:52 Config A/D Result=40 06:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:52 Get A/D filter: -9.255963e+061 result=40 06:00:52 Get A/D value=-858993460 result=40 06:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:00:52 Parameters OK 06:00:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:00:52 Set A/D data flow result=40 06:00:52 Set A/D channel type result=40 06:00:52 Set A/D encoding result=40 06:00:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:00:52 Set channel filter=0.000000e+000 result=40 06:00:52 Config A/D Result=40 06:00:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:00:52 Get A/D filter: -9.255963e+061 result=40 06:00:52 Get A/D value=-858993460 result=40 06:00:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:00:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:00:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:00:52 Aux= 06:00:52 Message to Camera, serial 2941 queued 06:01:23 Received message from Master: op=PointingHead serial=2948 06:01:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:01:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:01:23 Point started: ret=0 06:01:23 point_skyscan result=0 06:01:24 Check angles 06:01:24 SkyScan query 06:01:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0009 0009 06:01:25 Msec=0 True Az=113.01 Ze=-171.495 Az status=0009 Ze status=0009 06:01:25 Check angles 06:01:25 SkyScan query 06:01:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:01:26 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:01:26 Message to Master queued w/err=0: serial=2948 error=0 06:01:31 Received message from Master: op=Filter serial=2949 06:01:31 Color wheel filter change from 0 to 0 06:01:31 FLIGetFilterPos err=0 currentPosition=0 06:01:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:31 Filter is already there-color wheel unchanged 06:01:31 Received message from Master: op=Shutter serial=2950 06:01:31 Shutter LASER open 06:01:31 Received message from Camera: op=State serial=2952 06:01:31 GetSingleValue result=40 Value=cccccccc 06:01:31 SkyScan query 06:01:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:01:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:32 Parameters OK 06:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:32 Set A/D data flow result=40 06:01:32 Set A/D channel type result=40 06:01:32 Set A/D encoding result=40 06:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:32 Set channel filter=0.000000e+000 result=40 06:01:32 Config A/D Result=40 06:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:32 Get A/D filter: -9.255963e+061 result=40 06:01:32 Get A/D value=-858993460 result=40 06:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:32 Parameters OK 06:01:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:32 Set A/D data flow result=40 06:01:32 Set A/D channel type result=40 06:01:32 Set A/D encoding result=40 06:01:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:32 Set channel filter=0.000000e+000 result=40 06:01:32 Config A/D Result=40 06:01:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:32 Get A/D filter: -9.255963e+061 result=40 06:01:32 Get A/D value=-858993460 result=40 06:01:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:32 Aux= 06:01:32 Message to Camera, serial 2952 queued 06:01:34 Received message from Master: op=Shutter serial=2956 06:01:34 Shutter LASER close 06:01:35 Received message from Master: op=PointingHead serial=2960 06:01:35 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:01:35 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:01:35 Point started: ret=0 06:01:35 point_skyscan result=0 06:01:36 Check angles 06:01:36 SkyScan query 06:01:36 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.86<-21524 Statuses=0009 0009 06:01:36 Msec=0 True Az=136.215 Ze=-142.86 Az status=0009 Ze status=0009 06:01:36 Check angles 06:01:36 SkyScan query 06:01:37 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.89<-20126 Statuses=0009 0009 06:01:37 Msec=750 True Az=153.78 Ze=-121.89 Az status=0009 Ze status=0009 06:01:37 Check angles 06:01:37 SkyScan query 06:01:38 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.515<-18701 Statuses=0009 0009 06:01:38 Msec=1500 True Az=171.6 Ze=-100.515 Az status=0009 Ze status=0009 06:01:38 Check angles 06:01:38 SkyScan query 06:01:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.125<-17275 Statuses=0008 0009 06:01:39 Msec=2250 True Az=176.01 Ze=-79.125 Az status=0008 Ze status=0009 06:01:39 Check angles 06:01:39 SkyScan query 06:01:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.72<-15848 Statuses=0008 0009 06:01:39 Msec=3000 True Az=175.995 Ze=-57.72 Az status=0008 Ze status=0009 06:01:39 Check angles 06:01:39 SkyScan query 06:01:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:01:40 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:01:40 Message to Master queued w/err=0: serial=2960 error=0 06:01:45 Received message from Master: op=Filter serial=2961 06:01:45 Color wheel filter change from 0 to 0 06:01:45 FLIGetFilterPos err=0 currentPosition=0 06:01:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:01:45 Filter is already there-color wheel unchanged 06:01:45 Received message from Master: op=Shutter serial=2962 06:01:45 Shutter LASER close 06:01:45 Received message from Camera: op=State serial=2964 06:01:45 GetSingleValue result=40 Value=cccccccc 06:01:45 SkyScan query 06:01:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:01:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:46 Parameters OK 06:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:46 Set A/D data flow result=40 06:01:46 Set A/D channel type result=40 06:01:46 Set A/D encoding result=40 06:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:46 Set channel filter=0.000000e+000 result=40 06:01:46 Config A/D Result=40 06:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:46 Get A/D filter: -9.255963e+061 result=40 06:01:46 Get A/D value=-858993460 result=40 06:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:01:46 Parameters OK 06:01:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:01:46 Set A/D data flow result=40 06:01:46 Set A/D channel type result=40 06:01:46 Set A/D encoding result=40 06:01:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:01:46 Set channel filter=0.000000e+000 result=40 06:01:46 Config A/D Result=40 06:01:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:01:46 Get A/D filter: -9.255963e+061 result=40 06:01:46 Get A/D value=-858993460 result=40 06:01:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:01:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:01:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:01:46 Aux= 06:01:46 Message to Camera, serial 2964 queued 06:02:17 Received message from Master: op=PointingHead serial=2971 06:02:17 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:02:17 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:02:17 Point started: ret=0 06:02:17 point_skyscan result=0 06:02:18 Check angles 06:02:18 SkyScan query 06:02:18 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 06:02:18 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 06:02:19 Check angles 06:02:19 SkyScan query 06:02:19 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.42<-12028 Statuses=0009 0009 06:02:19 Msec=750 True Az=135.165 Ze=-0.42 Az status=0009 Ze status=0009 06:02:19 Check angles 06:02:19 SkyScan query 06:02:20 SkyScan query done: ret=0 az=117.33<-7822 ze=20.955<-10603 Statuses=0009 0009 06:02:20 Msec=1500 True Az=117.33 Ze=20.955 Az status=0009 Ze status=0009 06:02:20 Check angles 06:02:20 SkyScan query 06:02:21 SkyScan query done: ret=0 az=99.93<-6662 ze=41.91<-9206 Statuses=0009 0009 06:02:21 Msec=2250 True Az=99.93 Ze=41.91 Az status=0009 Ze status=0009 06:02:21 Check angles 06:02:21 SkyScan query 06:02:21 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 06:02:21 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 06:02:22 Check angles 06:02:22 SkyScan query 06:02:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:02:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:02:22 Message to Master queued w/err=0: serial=2971 error=0 06:02:27 Received message from Master: op=Filter serial=2972 06:02:27 Color wheel filter change from 0 to 0 06:02:27 FLIGetFilterPos err=0 currentPosition=0 06:02:27 FLIGetStepsRemaining err=0 RemainingSteps=0 06:02:27 Filter is already there-color wheel unchanged 06:02:27 Received message from Master: op=Shutter serial=2973 06:02:27 Shutter LASER close 06:02:27 Received message from Camera: op=State serial=2975 06:02:27 GetSingleValue result=40 Value=cccccccc 06:02:27 SkyScan query 06:02:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:02:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:28 Parameters OK 06:02:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:28 Set A/D data flow result=40 06:02:28 Set A/D channel type result=40 06:02:28 Set A/D encoding result=40 06:02:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:28 Set channel filter=0.000000e+000 result=40 06:02:28 Config A/D Result=40 06:02:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:28 Get A/D filter: -9.255963e+061 result=40 06:02:28 Get A/D value=-858993460 result=40 06:02:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:02:28 Parameters OK 06:02:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:02:28 Set A/D data flow result=40 06:02:28 Set A/D channel type result=40 06:02:28 Set A/D encoding result=40 06:02:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:02:28 Set channel filter=0.000000e+000 result=40 06:02:28 Config A/D Result=40 06:02:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:02:28 Get A/D filter: -9.255963e+061 result=40 06:02:28 Get A/D value=-858993460 result=40 06:02:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:02:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:02:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:02:28 Aux= 06:02:28 Message to Camera, serial 2975 queued 06:02:59 Received message from Master: op=PointingHead serial=2982 06:02:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:02:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:02:59 Point started: ret=0 06:02:59 point_skyscan result=0 06:03:00 Check angles 06:03:00 SkyScan query 06:03:01 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 06:03:01 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 06:03:01 Check angles 06:03:01 SkyScan query 06:03:01 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 06:03:01 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 06:03:01 Check angles 06:03:01 SkyScan query 06:03:02 SkyScan query done: ret=0 az=144.345<-9623 ze=38.505<-9433 Statuses=0009 0008 06:03:02 Msec=1500 True Az=144.345 Ze=38.505 Az status=0009 Ze status=0008 06:03:02 Check angles 06:03:02 SkyScan query 06:03:03 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 06:03:03 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 06:03:03 Check angles 06:03:03 SkyScan query 06:03:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 06:03:04 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 06:03:04 Check angles 06:03:04 SkyScan query 06:03:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:03:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:03:04 Message to Master queued w/err=0: serial=2982 error=0 06:03:09 Received message from Master: op=Filter serial=2983 06:03:09 Color wheel filter change from 0 to 0 06:03:09 FLIGetFilterPos err=0 currentPosition=0 06:03:09 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:09 Filter is already there-color wheel unchanged 06:03:09 Received message from Master: op=Shutter serial=2984 06:03:09 Shutter LASER close 06:03:10 Received message from Camera: op=State serial=2986 06:03:10 GetSingleValue result=40 Value=cccccccc 06:03:10 SkyScan query 06:03:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:03:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:10 Parameters OK 06:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:10 Set A/D data flow result=40 06:03:10 Set A/D channel type result=40 06:03:10 Set A/D encoding result=40 06:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:10 Set channel filter=0.000000e+000 result=40 06:03:10 Config A/D Result=40 06:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:10 Get A/D filter: -9.255963e+061 result=40 06:03:10 Get A/D value=-858993460 result=40 06:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:10 Parameters OK 06:03:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:10 Set A/D data flow result=40 06:03:10 Set A/D channel type result=40 06:03:10 Set A/D encoding result=40 06:03:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:10 Set channel filter=0.000000e+000 result=40 06:03:10 Config A/D Result=40 06:03:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:10 Get A/D filter: -9.255963e+061 result=40 06:03:10 Get A/D value=-858993460 result=40 06:03:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:10 Aux= 06:03:10 Message to Camera, serial 2986 queued 06:03:41 Received message from Master: op=PointingHead serial=2993 06:03:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:03:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:03:41 Point started: ret=0 06:03:41 point_skyscan result=0 06:03:42 Check angles 06:03:42 SkyScan query 06:03:43 SkyScan query done: ret=0 az=152.985<-10199 ze=8.655<-11423 Statuses=0009 0009 06:03:43 Msec=0 True Az=152.985 Ze=8.655 Az status=0009 Ze status=0009 06:03:43 Check angles 06:03:43 SkyScan query 06:03:43 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.27<-12818 Statuses=0009 0009 06:03:43 Msec=750 True Az=135.45 Ze=-12.27 Az status=0009 Ze status=0009 06:03:44 Check angles 06:03:44 SkyScan query 06:03:44 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.24<-14216 Statuses=0009 0009 06:03:44 Msec=1500 True Az=118.02 Ze=-33.24 Az status=0009 Ze status=0009 06:03:44 Check angles 06:03:44 SkyScan query 06:03:45 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 06:03:45 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 06:03:45 Check angles 06:03:45 SkyScan query 06:03:46 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:03:46 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:03:46 Check angles 06:03:46 SkyScan query 06:03:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:03:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:03:46 Message to Master queued w/err=0: serial=2993 error=0 06:03:51 Received message from Master: op=Filter serial=2994 06:03:51 Color wheel filter change from 0 to 0 06:03:51 FLIGetFilterPos err=0 currentPosition=0 06:03:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:03:51 Filter is already there-color wheel unchanged 06:03:52 Received message from Master: op=Shutter serial=2995 06:03:52 Shutter LASER close 06:03:52 Received message from Camera: op=State serial=2997 06:03:52 GetSingleValue result=40 Value=cccccccc 06:03:52 SkyScan query 06:03:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:03:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:52 Parameters OK 06:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:52 Set A/D data flow result=40 06:03:52 Set A/D channel type result=40 06:03:52 Set A/D encoding result=40 06:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:52 Set channel filter=0.000000e+000 result=40 06:03:52 Config A/D Result=40 06:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:52 Get A/D filter: -9.255963e+061 result=40 06:03:52 Get A/D value=-858993460 result=40 06:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:03:52 Parameters OK 06:03:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:03:52 Set A/D data flow result=40 06:03:52 Set A/D channel type result=40 06:03:52 Set A/D encoding result=40 06:03:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:03:52 Set channel filter=0.000000e+000 result=40 06:03:52 Config A/D Result=40 06:03:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:03:52 Get A/D filter: -9.255963e+061 result=40 06:03:52 Get A/D value=-858993460 result=40 06:03:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:03:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:03:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:03:52 Aux= 06:03:52 Message to Camera, serial 2997 queued 06:04:23 Received message from Master: op=PointingHead serial=3004 06:04:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:04:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:04:23 Point started: ret=0 06:04:23 point_skyscan result=0 06:04:24 Check angles 06:04:24 SkyScan query 06:04:25 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.72<-17448 Statuses=0009 0009 06:04:25 Msec=0 True Az=109.23 Ze=-81.72 Az status=0009 Ze status=0009 06:04:25 Check angles 06:04:25 SkyScan query 06:04:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 06:04:26 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 06:04:26 Check angles 06:04:26 SkyScan query 06:04:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.93<-20262 Statuses=0008 0009 06:04:26 Msec=1500 True Az=113.01 Ze=-123.93 Az status=0008 Ze status=0009 06:04:26 Check angles 06:04:26 SkyScan query 06:04:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.87<-21658 Statuses=0008 0009 06:04:27 Msec=2250 True Az=112.995 Ze=-144.87 Az status=0008 Ze status=0009 06:04:27 Check angles 06:04:27 SkyScan query 06:04:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.81<-23054 Statuses=0008 0009 06:04:28 Msec=3000 True Az=112.995 Ze=-165.81 Az status=0008 Ze status=0009 06:04:28 Check angles 06:04:28 SkyScan query 06:04:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:04:29 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:04:29 Message to Master queued w/err=0: serial=3004 error=0 06:04:34 Received message from Master: op=Filter serial=3005 06:04:34 Color wheel filter change from 0 to 0 06:04:34 FLIGetFilterPos err=0 currentPosition=0 06:04:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:34 Filter is already there-color wheel unchanged 06:04:34 Received message from Master: op=Shutter serial=3006 06:04:34 Shutter LASER open 06:04:34 Received message from Camera: op=State serial=3008 06:04:34 GetSingleValue result=40 Value=cccccccc 06:04:34 SkyScan query 06:04:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:04:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:35 Parameters OK 06:04:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:35 Set A/D data flow result=40 06:04:35 Set A/D channel type result=40 06:04:35 Set A/D encoding result=40 06:04:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:35 Set channel filter=0.000000e+000 result=40 06:04:35 Config A/D Result=40 06:04:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:35 Get A/D filter: -9.255963e+061 result=40 06:04:35 Get A/D value=-858993460 result=40 06:04:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:35 Parameters OK 06:04:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:35 Set A/D data flow result=40 06:04:35 Set A/D channel type result=40 06:04:35 Set A/D encoding result=40 06:04:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:35 Set channel filter=0.000000e+000 result=40 06:04:35 Config A/D Result=40 06:04:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:35 Get A/D filter: -9.255963e+061 result=40 06:04:35 Get A/D value=-858993460 result=40 06:04:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:35 Aux= 06:04:35 Message to Camera, serial 3008 queued 06:04:37 Received message from Master: op=Shutter serial=3012 06:04:37 Shutter LASER close 06:04:37 Received message from Master: op=PointingHead serial=3016 06:04:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:04:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:04:38 Point started: ret=0 06:04:38 point_skyscan result=0 06:04:39 Check angles 06:04:39 SkyScan query 06:04:39 SkyScan query done: ret=0 az=89.91<-5994 ze=157.41<-1506 Statuses=0009 0009 06:04:39 Msec=0 True Az=89.91 Ze=157.41 Az status=0009 Ze status=0009 06:04:39 Check angles 06:04:39 SkyScan query 06:04:40 SkyScan query done: ret=0 az=72.405<-4827 ze=136.455<-2903 Statuses=0009 0009 06:04:40 Msec=750 True Az=72.405 Ze=136.455 Az status=0009 Ze status=0009 06:04:40 Check angles 06:04:40 SkyScan query 06:04:41 SkyScan query done: ret=0 az=54.765<-3651 ze=115.08<-4328 Statuses=0009 0009 06:04:41 Msec=1500 True Az=54.765 Ze=115.08 Az status=0009 Ze status=0009 06:04:41 Check angles 06:04:41 SkyScan query 06:04:41 SkyScan query done: ret=0 az=40.86<-2724 ze=94.11<-5726 Statuses=0009 0009 06:04:41 Msec=2250 True Az=40.86 Ze=94.11 Az status=0009 Ze status=0009 06:04:42 Check angles 06:04:42 SkyScan query 06:04:42 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 06:04:42 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 06:04:42 Check angles 06:04:42 SkyScan query 06:04:43 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 06:04:43 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 06:04:43 Check angles 06:04:43 SkyScan query 06:04:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:04:44 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:04:44 Message to Master queued w/err=0: serial=3016 error=0 06:04:49 Received message from Master: op=Filter serial=3017 06:04:49 Color wheel filter change from 0 to 0 06:04:49 FLIGetFilterPos err=0 currentPosition=0 06:04:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:04:49 Filter is already there-color wheel unchanged 06:04:49 Received message from Master: op=Shutter serial=3018 06:04:49 Shutter LASER close 06:04:49 Received message from Camera: op=State serial=3020 06:04:49 GetSingleValue result=40 Value=cccccccc 06:04:49 SkyScan query 06:04:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:04:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:50 Parameters OK 06:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:50 Set A/D data flow result=40 06:04:50 Set A/D channel type result=40 06:04:50 Set A/D encoding result=40 06:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:50 Set channel filter=0.000000e+000 result=40 06:04:50 Config A/D Result=40 06:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:50 Get A/D filter: -9.255963e+061 result=40 06:04:50 Get A/D value=-858993460 result=40 06:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:04:50 Parameters OK 06:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:04:50 Set A/D data flow result=40 06:04:50 Set A/D channel type result=40 06:04:50 Set A/D encoding result=40 06:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:04:50 Set channel filter=0.000000e+000 result=40 06:04:50 Config A/D Result=40 06:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:04:50 Get A/D filter: -9.255963e+061 result=40 06:04:50 Get A/D value=-858993460 result=40 06:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:04:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:04:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:04:50 Aux= 06:04:50 Message to Camera, serial 3020 queued 06:05:20 Received message from Master: op=PointingHead serial=3027 06:05:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:05:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:05:21 Point started: ret=0 06:05:21 point_skyscan result=0 06:05:21 Check angles 06:05:21 SkyScan query 06:05:22 SkyScan query done: ret=0 az=64.005<-4267 ze=66.54<-7564 Statuses=0009 0008 06:05:22 Msec=0 True Az=64.005 Ze=66.54 Az status=0009 Ze status=0008 06:05:22 Check angles 06:05:22 SkyScan query 06:05:23 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 06:05:23 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 06:05:23 Check angles 06:05:23 SkyScan query 06:05:24 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 06:05:24 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 06:05:24 Check angles 06:05:24 SkyScan query 06:05:24 SkyScan query done: ret=0 az=117.21<-7814 ze=66.495<-7567 Statuses=0009 0008 06:05:24 Msec=2250 True Az=117.21 Ze=66.495 Az status=0009 Ze status=0008 06:05:25 Check angles 06:05:25 SkyScan query 06:05:25 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 06:05:25 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 06:05:25 Check angles 06:05:25 SkyScan query 06:05:26 SkyScan query done: ret=0 az=152.415<-10161 ze=66.495<-7567 Statuses=0009 0008 06:05:26 Msec=3750 True Az=152.415 Ze=66.495 Az status=0009 Ze status=0008 06:05:26 Check angles 06:05:26 SkyScan query 06:05:27 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:05:27 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:05:27 Message to Master queued w/err=0: serial=3027 error=0 06:05:32 Received message from Master: op=Filter serial=3028 06:05:32 Color wheel filter change from 0 to 0 06:05:32 FLIGetFilterPos err=0 currentPosition=0 06:05:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:05:32 Filter is already there-color wheel unchanged 06:05:32 Received message from Master: op=Shutter serial=3029 06:05:32 Shutter LASER close 06:05:32 Received message from Camera: op=State serial=3031 06:05:32 GetSingleValue result=40 Value=cccccccc 06:05:32 SkyScan query 06:05:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:05:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:32 Parameters OK 06:05:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:32 Set A/D data flow result=40 06:05:32 Set A/D channel type result=40 06:05:32 Set A/D encoding result=40 06:05:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:32 Set channel filter=0.000000e+000 result=40 06:05:32 Config A/D Result=40 06:05:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:32 Get A/D filter: -9.255963e+061 result=40 06:05:32 Get A/D value=-858993460 result=40 06:05:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:05:32 Parameters OK 06:05:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:05:32 Set A/D data flow result=40 06:05:32 Set A/D channel type result=40 06:05:32 Set A/D encoding result=40 06:05:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:05:32 Set channel filter=0.000000e+000 result=40 06:05:32 Config A/D Result=40 06:05:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:05:32 Get A/D filter: -9.255963e+061 result=40 06:05:32 Get A/D value=-858993460 result=40 06:05:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:05:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:05:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:05:32 Aux= 06:05:32 Message to Camera, serial 3031 queued 06:06:03 Received message from Master: op=PointingHead serial=3038 06:06:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:06:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:06:04 Point started: ret=0 06:06:04 point_skyscan result=0 06:06:04 Check angles 06:06:04 SkyScan query 06:06:05 SkyScan query done: ret=0 az=134.58<-8972 ze=36.18<-9588 Statuses=0009 0009 06:06:05 Msec=0 True Az=134.58 Ze=36.18 Az status=0009 Ze status=0009 06:06:05 Check angles 06:06:05 SkyScan query 06:06:06 SkyScan query done: ret=0 az=117.06<-7804 ze=15.24<-10984 Statuses=0009 0009 06:06:06 Msec=750 True Az=117.06 Ze=15.24 Az status=0009 Ze status=0009 06:06:06 Check angles 06:06:06 SkyScan query 06:06:06 SkyScan query done: ret=0 az=99.165<-6611 ze=-6.165<-12411 Statuses=0009 0009 06:06:06 Msec=1500 True Az=99.165 Ze=-6.165 Az status=0009 Ze status=0009 06:06:07 Check angles 06:06:07 SkyScan query 06:06:07 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.12<-13808 Statuses=0009 0009 06:06:07 Msec=2250 True Az=81.81 Ze=-27.12 Az status=0009 Ze status=0009 06:06:07 Check angles 06:06:07 SkyScan query 06:06:08 SkyScan query done: ret=0 az=64.29<-4286 ze=-38.55<-14570 Statuses=0009 0008 06:06:08 Msec=3000 True Az=64.29 Ze=-38.55 Az status=0009 Ze status=0008 06:06:08 Check angles 06:06:08 SkyScan query 06:06:09 SkyScan query done: ret=0 az=46.56<-3104 ze=-38.535<-14569 Statuses=0009 0008 06:06:09 Msec=3750 True Az=46.56 Ze=-38.535 Az status=0009 Ze status=0008 06:06:09 Check angles 06:06:09 SkyScan query 06:06:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:06:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:06:09 Message to Master queued w/err=0: serial=3038 error=0 06:06:14 Received message from Master: op=Filter serial=3039 06:06:14 Color wheel filter change from 0 to 0 06:06:14 FLIGetFilterPos err=0 currentPosition=0 06:06:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:14 Filter is already there-color wheel unchanged 06:06:15 Received message from Master: op=Shutter serial=3040 06:06:15 Shutter LASER close 06:06:15 Received message from Camera: op=State serial=3042 06:06:15 GetSingleValue result=40 Value=cccccccc 06:06:15 SkyScan query 06:06:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:06:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:15 Parameters OK 06:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:15 Set A/D data flow result=40 06:06:15 Set A/D channel type result=40 06:06:15 Set A/D encoding result=40 06:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:15 Set channel filter=0.000000e+000 result=40 06:06:15 Config A/D Result=40 06:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:15 Get A/D filter: -9.255963e+061 result=40 06:06:15 Get A/D value=-858993460 result=40 06:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:15 Parameters OK 06:06:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:15 Set A/D data flow result=40 06:06:15 Set A/D channel type result=40 06:06:15 Set A/D encoding result=40 06:06:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:15 Set channel filter=0.000000e+000 result=40 06:06:15 Config A/D Result=40 06:06:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:15 Get A/D filter: -9.255963e+061 result=40 06:06:15 Get A/D value=-858993460 result=40 06:06:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:15 Aux= 06:06:15 Message to Camera, serial 3042 queued 06:06:46 Received message from Master: op=PointingHead serial=3049 06:06:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:06:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:06:46 Point started: ret=0 06:06:46 point_skyscan result=0 06:06:47 Check angles 06:06:47 SkyScan query 06:06:48 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.37<-16558 Statuses=0009 0009 06:06:48 Msec=0 True Az=64.005 Ze=-68.37 Az status=0009 Ze status=0009 06:06:48 Check angles 06:06:48 SkyScan query 06:06:49 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.355<-17957 Statuses=0009 0009 06:06:49 Msec=750 True Az=81.6 Ze=-89.355 Az status=0009 Ze status=0009 06:06:49 Check angles 06:06:49 SkyScan query 06:06:49 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.295<-19353 Statuses=0009 0009 06:06:49 Msec=1500 True Az=99.15 Ze=-110.295 Az status=0009 Ze status=0009 06:06:49 Check angles 06:06:49 SkyScan query 06:06:50 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.235<-20749 Statuses=0009 0009 06:06:50 Msec=2250 True Az=116.505 Ze=-131.235 Az status=0009 Ze status=0009 06:06:50 Check angles 06:06:50 SkyScan query 06:06:51 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 06:06:51 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 06:06:51 Check angles 06:06:51 SkyScan query 06:06:52 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:06:52 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:06:52 Message to Master queued w/err=0: serial=3049 error=0 06:06:57 Received message from Master: op=Filter serial=3050 06:06:57 Color wheel filter change from 0 to 0 06:06:57 FLIGetFilterPos err=0 currentPosition=0 06:06:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:06:57 Filter is already there-color wheel unchanged 06:06:57 Received message from Master: op=Shutter serial=3051 06:06:57 Shutter LASER close 06:06:57 Received message from Camera: op=State serial=3053 06:06:57 GetSingleValue result=40 Value=cccccccc 06:06:57 SkyScan query 06:06:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:06:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:57 Parameters OK 06:06:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:57 Set A/D data flow result=40 06:06:57 Set A/D channel type result=40 06:06:57 Set A/D encoding result=40 06:06:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:57 Set channel filter=0.000000e+000 result=40 06:06:57 Config A/D Result=40 06:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:57 Get A/D filter: -9.255963e+061 result=40 06:06:57 Get A/D value=-858993460 result=40 06:06:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:06:57 Parameters OK 06:06:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:06:57 Set A/D data flow result=40 06:06:57 Set A/D channel type result=40 06:06:57 Set A/D encoding result=40 06:06:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:06:57 Set channel filter=0.000000e+000 result=40 06:06:57 Config A/D Result=40 06:06:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:06:57 Get A/D filter: -9.255963e+061 result=40 06:06:57 Get A/D value=-858993460 result=40 06:06:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:06:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:06:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:06:57 Aux= 06:06:57 Message to Camera, serial 3053 queued 06:07:28 Received message from Master: op=PointingHead serial=3060 06:07:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:07:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:07:29 Point started: ret=0 06:07:29 point_skyscan result=0 06:07:29 Check angles 06:07:29 SkyScan query 06:07:30 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.015<-23401 Statuses=0009 0009 06:07:30 Msec=0 True Az=113.025 Ze=-171.015 Az status=0009 Ze status=0009 06:07:30 Check angles 06:07:30 SkyScan query 06:07:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:07:31 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:07:31 Message to Master queued w/err=0: serial=3060 error=0 06:07:36 Received message from Master: op=Filter serial=3061 06:07:36 Color wheel filter change from 0 to 0 06:07:36 FLIGetFilterPos err=0 currentPosition=0 06:07:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:36 Filter is already there-color wheel unchanged 06:07:36 Received message from Master: op=Shutter serial=3062 06:07:36 Shutter LASER open 06:07:36 Received message from Camera: op=State serial=3064 06:07:36 GetSingleValue result=40 Value=cccccccc 06:07:36 SkyScan query 06:07:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:07:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:37 Parameters OK 06:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:37 Set A/D data flow result=40 06:07:37 Set A/D channel type result=40 06:07:37 Set A/D encoding result=40 06:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:37 Set channel filter=0.000000e+000 result=40 06:07:37 Config A/D Result=40 06:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:37 Get A/D filter: -9.255963e+061 result=40 06:07:37 Get A/D value=-858993460 result=40 06:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:37 Parameters OK 06:07:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:37 Set A/D data flow result=40 06:07:37 Set A/D channel type result=40 06:07:37 Set A/D encoding result=40 06:07:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:37 Set channel filter=0.000000e+000 result=40 06:07:37 Config A/D Result=40 06:07:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:37 Get A/D filter: -9.255963e+061 result=40 06:07:37 Get A/D value=-858993460 result=40 06:07:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:37 Aux= 06:07:37 Message to Camera, serial 3064 queued 06:07:39 Received message from Master: op=Shutter serial=3068 06:07:39 Shutter LASER close 06:07:40 Received message from Master: op=PointingHead serial=3072 06:07:40 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:07:40 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:07:40 Point started: ret=0 06:07:40 point_skyscan result=0 06:07:41 Check angles 06:07:41 SkyScan query 06:07:41 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.325<-21555 Statuses=0009 0009 06:07:41 Msec=0 True Az=135.93 Ze=-143.325 Az status=0009 Ze status=0009 06:07:41 Check angles 06:07:41 SkyScan query 06:07:42 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.37<-20158 Statuses=0009 0009 06:07:42 Msec=750 True Az=153.42 Ze=-122.37 Az status=0009 Ze status=0009 06:07:42 Check angles 06:07:42 SkyScan query 06:07:43 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.01<-18734 Statuses=0009 0009 06:07:43 Msec=1500 True Az=171.18 Ze=-101.01 Az status=0009 Ze status=0009 06:07:43 Check angles 06:07:43 SkyScan query 06:07:43 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.04<-17336 Statuses=0008 0009 06:07:43 Msec=2250 True Az=176.025 Ze=-80.04 Az status=0008 Ze status=0009 06:07:44 Check angles 06:07:44 SkyScan query 06:07:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.07<-15938 Statuses=0008 0009 06:07:44 Msec=3000 True Az=175.995 Ze=-59.07 Az status=0008 Ze status=0009 06:07:44 Check angles 06:07:44 SkyScan query 06:07:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:07:45 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:07:45 Message to Master queued w/err=0: serial=3072 error=0 06:07:50 Received message from Master: op=Filter serial=3073 06:07:50 Color wheel filter change from 0 to 0 06:07:50 FLIGetFilterPos err=0 currentPosition=0 06:07:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:07:50 Filter is already there-color wheel unchanged 06:07:50 Received message from Master: op=Shutter serial=3074 06:07:50 Shutter LASER close 06:07:50 Received message from Camera: op=State serial=3076 06:07:50 GetSingleValue result=40 Value=cccccccc 06:07:50 SkyScan query 06:07:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:07:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:51 Parameters OK 06:07:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:51 Set A/D data flow result=40 06:07:51 Set A/D channel type result=40 06:07:51 Set A/D encoding result=40 06:07:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:51 Set channel filter=0.000000e+000 result=40 06:07:51 Config A/D Result=40 06:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:51 Get A/D filter: -9.255963e+061 result=40 06:07:51 Get A/D value=-858993460 result=40 06:07:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:07:51 Parameters OK 06:07:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:07:51 Set A/D data flow result=40 06:07:51 Set A/D channel type result=40 06:07:51 Set A/D encoding result=40 06:07:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:07:51 Set channel filter=0.000000e+000 result=40 06:07:51 Config A/D Result=40 06:07:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:07:51 Get A/D filter: -9.255963e+061 result=40 06:07:51 Get A/D value=-858993460 result=40 06:07:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:07:51 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:07:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:07:51 Aux= 06:07:51 Message to Camera, serial 3076 queued 06:08:22 Received message from Master: op=PointingHead serial=3083 06:08:22 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:08:22 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:08:22 Point started: ret=0 06:08:22 point_skyscan result=0 06:08:23 Check angles 06:08:23 SkyScan query 06:08:23 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.66<-13444 Statuses=0009 0009 06:08:23 Msec=0 True Az=152.97 Ze=-21.66 Az status=0009 Ze status=0009 06:08:24 Check angles 06:08:24 SkyScan query 06:08:24 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.69<-12046 Statuses=0009 0009 06:08:24 Msec=750 True Az=135.435 Ze=-0.69 Az status=0009 Ze status=0009 06:08:24 Check angles 06:08:24 SkyScan query 06:08:25 SkyScan query done: ret=0 az=117.615<-7841 ze=20.685<-10621 Statuses=0009 0009 06:08:25 Msec=1500 True Az=117.615 Ze=20.685 Az status=0009 Ze status=0009 06:08:25 Check angles 06:08:25 SkyScan query 06:08:26 SkyScan query done: ret=0 az=100.2<-6680 ze=41.64<-9224 Statuses=0009 0009 06:08:26 Msec=2250 True Az=100.2 Ze=41.64 Az status=0009 Ze status=0009 06:08:26 Check angles 06:08:26 SkyScan query 06:08:26 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:08:26 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:08:27 Check angles 06:08:27 SkyScan query 06:08:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:08:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:08:27 Message to Master queued w/err=0: serial=3083 error=0 06:08:32 Received message from Master: op=Filter serial=3084 06:08:32 Color wheel filter change from 0 to 0 06:08:32 FLIGetFilterPos err=0 currentPosition=0 06:08:32 FLIGetStepsRemaining err=0 RemainingSteps=0 06:08:32 Filter is already there-color wheel unchanged 06:08:32 Received message from Master: op=Shutter serial=3085 06:08:32 Shutter LASER close 06:08:32 Received message from Camera: op=State serial=3087 06:08:32 GetSingleValue result=40 Value=cccccccc 06:08:32 SkyScan query 06:08:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:08:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:33 Parameters OK 06:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:33 Set A/D data flow result=40 06:08:33 Set A/D channel type result=40 06:08:33 Set A/D encoding result=40 06:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:33 Set channel filter=0.000000e+000 result=40 06:08:33 Config A/D Result=40 06:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:33 Get A/D filter: -9.255963e+061 result=40 06:08:33 Get A/D value=-858993460 result=40 06:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:08:33 Parameters OK 06:08:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:08:33 Set A/D data flow result=40 06:08:33 Set A/D channel type result=40 06:08:33 Set A/D encoding result=40 06:08:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:08:33 Set channel filter=0.000000e+000 result=40 06:08:33 Config A/D Result=40 06:08:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:08:33 Get A/D filter: -9.255963e+061 result=40 06:08:33 Get A/D value=-858993460 result=40 06:08:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:08:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:08:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:08:33 Aux= 06:08:33 Message to Camera, serial 3087 queued 06:09:04 Received message from Master: op=PointingHead serial=3094 06:09:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:09:04 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:09:04 Point started: ret=0 06:09:04 point_skyscan result=0 06:09:05 Check angles 06:09:05 SkyScan query 06:09:06 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 06:09:06 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 06:09:06 Check angles [UTC 2018-12-4 06:09:06] 06:09:06 SkyScan query 06:09:06 SkyScan query done: ret=0 az=127.8<-8520 ze=38.505<-9433 Statuses=0009 0008 06:09:06 Msec=750 True Az=127.8 Ze=38.505 Az status=0009 Ze status=0008 06:09:06 Check angles 06:09:06 SkyScan query 06:09:07 SkyScan query done: ret=0 az=143.91<-9594 ze=38.505<-9433 Statuses=0009 0008 06:09:07 Msec=1500 True Az=143.91 Ze=38.505 Az status=0009 Ze status=0008 06:09:07 Check angles 06:09:07 SkyScan query 06:09:08 SkyScan query done: ret=0 az=161.58<-10772 ze=38.505<-9433 Statuses=0009 0008 06:09:08 Msec=2250 True Az=161.58 Ze=38.505 Az status=0009 Ze status=0008 06:09:08 Check angles 06:09:08 SkyScan query 06:09:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 06:09:09 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 06:09:09 Check angles 06:09:09 SkyScan query 06:09:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:09:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:09:09 Message to Master queued w/err=0: serial=3094 error=0 06:09:14 Received message from Master: op=Filter serial=3095 06:09:14 Color wheel filter change from 0 to 0 06:09:14 FLIGetFilterPos err=0 currentPosition=0 06:09:14 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:14 Filter is already there-color wheel unchanged 06:09:14 Received message from Master: op=Shutter serial=3096 06:09:14 Shutter LASER close 06:09:15 Received message from Camera: op=State serial=3098 06:09:15 GetSingleValue result=40 Value=cccccccc 06:09:15 SkyScan query 06:09:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:09:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:15 Parameters OK 06:09:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:15 Set A/D data flow result=40 06:09:15 Set A/D channel type result=40 06:09:15 Set A/D encoding result=40 06:09:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:15 Set channel filter=0.000000e+000 result=40 06:09:15 Config A/D Result=40 06:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:15 Get A/D filter: -9.255963e+061 result=40 06:09:15 Get A/D value=-858993460 result=40 06:09:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:15 Parameters OK 06:09:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:15 Set A/D data flow result=40 06:09:15 Set A/D channel type result=40 06:09:15 Set A/D encoding result=40 06:09:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:15 Set channel filter=0.000000e+000 result=40 06:09:15 Config A/D Result=40 06:09:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:15 Get A/D filter: -9.255963e+061 result=40 06:09:15 Get A/D value=-858993460 result=40 06:09:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:15 Aux= 06:09:15 Message to Camera, serial 3098 queued 06:09:46 Received message from Master: op=PointingHead serial=3105 06:09:46 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:09:46 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:09:46 Point started: ret=0 06:09:46 point_skyscan result=0 06:09:47 Check angles 06:09:47 SkyScan query 06:09:48 SkyScan query done: ret=0 az=152.685<-10179 ze=8.25<-11450 Statuses=0009 0009 06:09:48 Msec=0 True Az=152.685 Ze=8.25 Az status=0009 Ze status=0009 06:09:48 Check angles 06:09:48 SkyScan query 06:09:48 SkyScan query done: ret=0 az=134.67<-8978 ze=-13.155<-12877 Statuses=0009 0009 06:09:48 Msec=750 True Az=134.67 Ze=-13.155 Az status=0009 Ze status=0009 06:09:49 Check angles 06:09:49 SkyScan query 06:09:49 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.08<-14272 Statuses=0009 0009 06:09:49 Msec=1500 True Az=117.285 Ze=-34.08 Az status=0009 Ze status=0009 06:09:49 Check angles 06:09:49 SkyScan query 06:09:50 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.54<-15436 Statuses=0009 0009 06:09:50 Msec=2250 True Az=99.93 Ze=-51.54 Az status=0009 Ze status=0009 06:09:50 Check angles 06:09:50 SkyScan query 06:09:51 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:09:51 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:09:51 Check angles 06:09:51 SkyScan query 06:09:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:09:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:09:51 Message to Master queued w/err=0: serial=3105 error=0 06:09:56 Received message from Master: op=Filter serial=3106 06:09:56 Color wheel filter change from 0 to 0 06:09:56 FLIGetFilterPos err=0 currentPosition=0 06:09:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:09:56 Filter is already there-color wheel unchanged 06:09:57 Received message from Master: op=Shutter serial=3107 06:09:57 Shutter LASER close 06:09:57 Received message from Camera: op=State serial=3109 06:09:57 GetSingleValue result=40 Value=cccccccc 06:09:57 SkyScan query 06:09:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:09:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:57 Parameters OK 06:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:57 Set A/D data flow result=40 06:09:57 Set A/D channel type result=40 06:09:57 Set A/D encoding result=40 06:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:57 Set channel filter=0.000000e+000 result=40 06:09:57 Config A/D Result=40 06:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:57 Get A/D filter: -9.255963e+061 result=40 06:09:57 Get A/D value=-858993460 result=40 06:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:09:57 Parameters OK 06:09:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:09:57 Set A/D data flow result=40 06:09:57 Set A/D channel type result=40 06:09:57 Set A/D encoding result=40 06:09:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:09:57 Set channel filter=0.000000e+000 result=40 06:09:57 Config A/D Result=40 06:09:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:09:57 Get A/D filter: -9.255963e+061 result=40 06:09:57 Get A/D value=-858993460 result=40 06:09:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:09:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:09:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:09:57 Aux= 06:09:57 Message to Camera, serial 3109 queued 06:10:28 Received message from Master: op=PointingHead serial=3116 06:10:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:10:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:10:28 Point started: ret=0 06:10:28 point_skyscan result=0 06:10:29 Check angles 06:10:29 SkyScan query 06:10:30 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.78<-17452 Statuses=0009 0009 06:10:30 Msec=0 True Az=109.395 Ze=-81.78 Az status=0009 Ze status=0009 06:10:30 Check angles 06:10:30 SkyScan query 06:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 06:10:31 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 06:10:31 Check angles 06:10:31 SkyScan query 06:10:31 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.69<-20246 Statuses=0008 0009 06:10:31 Msec=1500 True Az=113.01 Ze=-123.69 Az status=0008 Ze status=0009 06:10:31 Check angles 06:10:31 SkyScan query 06:10:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 06:10:32 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 06:10:32 Check angles 06:10:32 SkyScan query 06:10:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 06:10:33 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 06:10:33 Check angles 06:10:33 SkyScan query 06:10:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:10:34 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:10:34 Message to Master queued w/err=0: serial=3116 error=0 06:10:39 Received message from Master: op=Filter serial=3117 06:10:39 Color wheel filter change from 0 to 0 06:10:39 FLIGetFilterPos err=0 currentPosition=0 06:10:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:39 Filter is already there-color wheel unchanged 06:10:39 Received message from Master: op=Shutter serial=3118 06:10:39 Shutter LASER open 06:10:39 Received message from Camera: op=State serial=3120 06:10:39 GetSingleValue result=40 Value=cccccccc 06:10:39 SkyScan query 06:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:39 Parameters OK 06:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:39 Set A/D data flow result=40 06:10:39 Set A/D channel type result=40 06:10:39 Set A/D encoding result=40 06:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:39 Set channel filter=0.000000e+000 result=40 06:10:39 Config A/D Result=40 06:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:39 Get A/D filter: -9.255963e+061 result=40 06:10:39 Get A/D value=-858993460 result=40 06:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:39 Parameters OK 06:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:39 Set A/D data flow result=40 06:10:39 Set A/D channel type result=40 06:10:39 Set A/D encoding result=40 06:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:39 Set channel filter=0.000000e+000 result=40 06:10:39 Config A/D Result=40 06:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:39 Get A/D filter: -9.255963e+061 result=40 06:10:39 Get A/D value=-858993460 result=40 06:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:39 Aux= 06:10:39 Message to Camera, serial 3120 queued 06:10:42 Received message from Master: op=Shutter serial=3124 06:10:42 Shutter LASER close 06:10:42 Received message from Master: op=PointingHead serial=3128 06:10:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:10:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:10:43 Point started: ret=0 06:10:43 point_skyscan result=0 06:10:43 Check angles 06:10:43 SkyScan query 06:10:44 SkyScan query done: ret=0 az=89.145<-5943 ze=156.75<-1550 Statuses=0009 0009 06:10:44 Msec=0 True Az=89.145 Ze=156.75 Az status=0009 Ze status=0009 06:10:44 Check angles 06:10:44 SkyScan query 06:10:45 SkyScan query done: ret=0 az=71.82<-4788 ze=135.78<-2948 Statuses=0009 0009 06:10:45 Msec=750 True Az=71.82 Ze=135.78 Az status=0009 Ze status=0009 06:10:45 Check angles 06:10:45 SkyScan query 06:10:46 SkyScan query done: ret=0 az=54.555<-3637 ze=114.825<-4345 Statuses=0009 0009 06:10:46 Msec=1500 True Az=54.555 Ze=114.825 Az status=0009 Ze status=0009 06:10:46 Check angles 06:10:46 SkyScan query 06:10:46 SkyScan query done: ret=0 az=40.89<-2726 ze=93.855<-5743 Statuses=0009 0009 06:10:46 Msec=2250 True Az=40.89 Ze=93.855 Az status=0009 Ze status=0009 06:10:46 Check angles 06:10:46 SkyScan query 06:10:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 06:10:47 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 06:10:47 Check angles 06:10:47 SkyScan query 06:10:48 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 06:10:48 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 06:10:48 Check angles 06:10:48 SkyScan query 06:10:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:10:49 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:10:49 Message to Master queued w/err=0: serial=3128 error=0 06:10:54 Received message from Master: op=Filter serial=3129 06:10:54 Color wheel filter change from 0 to 0 06:10:54 FLIGetFilterPos err=0 currentPosition=0 06:10:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:10:54 Filter is already there-color wheel unchanged 06:10:54 Received message from Master: op=Shutter serial=3130 06:10:54 Shutter LASER close 06:10:54 Received message from Camera: op=State serial=3132 06:10:54 GetSingleValue result=40 Value=cccccccc 06:10:54 SkyScan query 06:10:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:10:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:54 Parameters OK 06:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:54 Set A/D data flow result=40 06:10:54 Set A/D channel type result=40 06:10:54 Set A/D encoding result=40 06:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:54 Set channel filter=0.000000e+000 result=40 06:10:54 Config A/D Result=40 06:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:54 Get A/D filter: -9.255963e+061 result=40 06:10:54 Get A/D value=-858993460 result=40 06:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:10:54 Parameters OK 06:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:10:54 Set A/D data flow result=40 06:10:54 Set A/D channel type result=40 06:10:54 Set A/D encoding result=40 06:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:10:54 Set channel filter=0.000000e+000 result=40 06:10:54 Config A/D Result=40 06:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:10:54 Get A/D filter: -9.255963e+061 result=40 06:10:54 Get A/D value=-858993460 result=40 06:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:10:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:10:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:10:54 Aux= 06:10:54 Message to Camera, serial 3132 queued 06:11:25 Received message from Master: op=PointingHead serial=3139 06:11:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:11:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:11:26 Point started: ret=0 06:11:26 point_skyscan result=0 06:11:26 Check angles 06:11:26 SkyScan query 06:11:27 SkyScan query done: ret=0 az=63.825<-4255 ze=66.54<-7564 Statuses=0009 0008 06:11:27 Msec=0 True Az=63.825 Ze=66.54 Az status=0009 Ze status=0008 06:11:27 Check angles 06:11:27 SkyScan query 06:11:28 SkyScan query done: ret=0 az=81.66<-5444 ze=66.51<-7566 Statuses=0009 0008 06:11:28 Msec=750 True Az=81.66 Ze=66.51 Az status=0009 Ze status=0008 06:11:28 Check angles 06:11:28 SkyScan query 06:11:28 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 06:11:28 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 06:11:29 Check angles 06:11:29 SkyScan query 06:11:29 SkyScan query done: ret=0 az=116.55<-7770 ze=66.495<-7567 Statuses=0009 0008 06:11:29 Msec=2250 True Az=116.55 Ze=66.495 Az status=0009 Ze status=0008 06:11:29 Check angles 06:11:29 SkyScan query 06:11:30 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 06:11:30 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 06:11:30 Check angles 06:11:30 SkyScan query 06:11:31 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 06:11:31 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 06:11:31 Check angles 06:11:31 SkyScan query 06:11:31 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:11:31 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:11:31 Message to Master queued w/err=0: serial=3139 error=0 06:11:36 Received message from Master: op=Filter serial=3140 06:11:36 Color wheel filter change from 0 to 0 06:11:36 FLIGetFilterPos err=0 currentPosition=0 06:11:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:11:36 Filter is already there-color wheel unchanged 06:11:37 Received message from Master: op=Shutter serial=3141 06:11:37 Shutter LASER close 06:11:37 Received message from Camera: op=State serial=3143 06:11:37 GetSingleValue result=40 Value=cccccccc 06:11:37 SkyScan query 06:11:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:11:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:37 Parameters OK 06:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:37 Set A/D data flow result=40 06:11:37 Set A/D channel type result=40 06:11:37 Set A/D encoding result=40 06:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:37 Set channel filter=0.000000e+000 result=40 06:11:37 Config A/D Result=40 06:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:37 Get A/D filter: -9.255963e+061 result=40 06:11:37 Get A/D value=-858993460 result=40 06:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:11:37 Parameters OK 06:11:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:11:37 Set A/D data flow result=40 06:11:37 Set A/D channel type result=40 06:11:37 Set A/D encoding result=40 06:11:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:11:37 Set channel filter=0.000000e+000 result=40 06:11:37 Config A/D Result=40 06:11:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:11:37 Get A/D filter: -9.255963e+061 result=40 06:11:37 Get A/D value=-858993460 result=40 06:11:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:11:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:11:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:11:37 Aux= 06:11:37 Message to Camera, serial 3143 queued 06:12:08 Received message from Master: op=PointingHead serial=3150 06:12:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:12:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:12:09 Point started: ret=0 06:12:09 point_skyscan result=0 [UTC 2018-12-4 06:12:09] 06:12:09 Check angles 06:12:09 SkyScan query 06:12:10 SkyScan query done: ret=0 az=134.865<-8991 ze=36.615<-9559 Statuses=0009 0009 06:12:10 Msec=0 True Az=134.865 Ze=36.615 Az status=0009 Ze status=0009 06:12:10 Check angles 06:12:10 SkyScan query 06:12:11 SkyScan query done: ret=0 az=117.045<-7803 ze=15.24<-10984 Statuses=0009 0009 06:12:11 Msec=750 True Az=117.045 Ze=15.24 Az status=0009 Ze status=0009 06:12:11 Check angles 06:12:11 SkyScan query 06:12:11 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.745<-12383 Statuses=0009 0009 06:12:11 Msec=1500 True Az=99.69 Ze=-5.745 Az status=0009 Ze status=0009 06:12:12 Check angles 06:12:12 SkyScan query 06:12:12 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.685<-13779 Statuses=0009 0009 06:12:12 Msec=2250 True Az=82.215 Ze=-26.685 Az status=0009 Ze status=0009 06:12:12 Check angles 06:12:12 SkyScan query 06:12:13 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 06:12:13 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 06:12:13 Check angles 06:12:13 SkyScan query 06:12:14 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 06:12:14 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 06:12:14 Check angles 06:12:14 SkyScan query 06:12:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:12:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:12:14 Message to Master queued w/err=0: serial=3150 error=0 06:12:19 Received message from Master: op=Filter serial=3151 06:12:19 Color wheel filter change from 0 to 0 06:12:19 FLIGetFilterPos err=0 currentPosition=0 06:12:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:12:19 Filter is already there-color wheel unchanged 06:12:20 Received message from Master: op=Shutter serial=3152 06:12:20 Shutter LASER close 06:12:20 Received message from Camera: op=State serial=3154 06:12:20 GetSingleValue result=40 Value=cccccccc 06:12:20 SkyScan query 06:12:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:12:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:20 Parameters OK 06:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:20 Set A/D data flow result=40 06:12:20 Set A/D channel type result=40 06:12:20 Set A/D encoding result=40 06:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:20 Set channel filter=0.000000e+000 result=40 06:12:20 Config A/D Result=40 06:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:20 Get A/D filter: -9.255963e+061 result=40 06:12:20 Get A/D value=-858993460 result=40 06:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:12:20 Parameters OK 06:12:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:12:20 Set A/D data flow result=40 06:12:20 Set A/D channel type result=40 06:12:20 Set A/D encoding result=40 06:12:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:12:20 Set channel filter=0.000000e+000 result=40 06:12:20 Config A/D Result=40 06:12:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:12:20 Get A/D filter: -9.255963e+061 result=40 06:12:20 Get A/D value=-858993460 result=40 06:12:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:12:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:12:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:12:20 Aux= 06:12:20 Message to Camera, serial 3154 queued 06:12:51 Received message from Master: op=PointingHead serial=3161 06:12:51 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:12:51 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:12:51 Point started: ret=0 06:12:51 point_skyscan result=0 06:12:52 Check angles 06:12:52 SkyScan query 06:12:53 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.46<-16564 Statuses=0009 0009 06:12:53 Msec=0 True Az=64.02 Ze=-68.46 Az status=0009 Ze status=0009 06:12:53 Check angles 06:12:53 SkyScan query 06:12:53 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.85<-17990 Statuses=0009 0009 06:12:53 Msec=750 True Az=82.095 Ze=-89.85 Az status=0009 Ze status=0009 06:12:54 Check angles 06:12:54 SkyScan query 06:12:54 SkyScan query done: ret=0 az=99.48<-6632 ze=-110.79<-19386 Statuses=0009 0009 06:12:54 Msec=1500 True Az=99.48 Ze=-110.79 Az status=0009 Ze status=0009 06:12:54 Check angles 06:12:54 SkyScan query 06:12:55 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.745<-20783 Statuses=0009 0009 06:12:55 Msec=2250 True Az=116.925 Ze=-131.745 Az status=0009 Ze status=0009 06:12:55 Check angles 06:12:55 SkyScan query 06:12:56 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 06:12:56 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 06:12:56 Check angles 06:12:56 SkyScan query 06:12:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:12:56 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:12:56 Message to Master queued w/err=0: serial=3161 error=0 06:13:01 Received message from Master: op=Filter serial=3162 06:13:01 Color wheel filter change from 0 to 0 06:13:01 FLIGetFilterPos err=0 currentPosition=0 06:13:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:01 Filter is already there-color wheel unchanged 06:13:02 Received message from Master: op=Shutter serial=3163 06:13:02 Shutter LASER close 06:13:02 Received message from Camera: op=State serial=3165 06:13:02 GetSingleValue result=40 Value=cccccccc 06:13:02 SkyScan query 06:13:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:13:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:02 Parameters OK 06:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:02 Set A/D data flow result=40 06:13:02 Set A/D channel type result=40 06:13:02 Set A/D encoding result=40 06:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:02 Set channel filter=0.000000e+000 result=40 06:13:02 Config A/D Result=40 06:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:02 Get A/D filter: -9.255963e+061 result=40 06:13:02 Get A/D value=-858993460 result=40 06:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:02 Parameters OK 06:13:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:02 Set A/D data flow result=40 06:13:02 Set A/D channel type result=40 06:13:02 Set A/D encoding result=40 06:13:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:02 Set channel filter=0.000000e+000 result=40 06:13:02 Config A/D Result=40 06:13:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:02 Get A/D filter: -9.255963e+061 result=40 06:13:02 Get A/D value=-858993460 result=40 06:13:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:02 Aux= 06:13:02 Message to Camera, serial 3165 queued 06:13:33 Received message from Master: op=PointingHead serial=3172 06:13:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:13:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:13:33 Point started: ret=0 06:13:33 point_skyscan result=0 06:13:34 Check angles 06:13:34 SkyScan query 06:13:35 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.97<-23398 Statuses=0009 0009 06:13:35 Msec=0 True Az=113.025 Ze=-170.97 Az status=0009 Ze status=0009 06:13:35 Check angles 06:13:35 SkyScan query 06:13:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:13:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:13:36 Message to Master queued w/err=0: serial=3172 error=0 06:13:41 Received message from Master: op=Filter serial=3173 06:13:41 Color wheel filter change from 0 to 0 06:13:41 FLIGetFilterPos err=0 currentPosition=0 06:13:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:41 Filter is already there-color wheel unchanged 06:13:41 Received message from Master: op=Shutter serial=3174 06:13:41 Shutter LASER open 06:13:41 Received message from Camera: op=State serial=3176 06:13:41 GetSingleValue result=40 Value=cccccccc 06:13:41 SkyScan query 06:13:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:13:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:41 Parameters OK 06:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:41 Set A/D data flow result=40 06:13:41 Set A/D channel type result=40 06:13:41 Set A/D encoding result=40 06:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:41 Set channel filter=0.000000e+000 result=40 06:13:41 Config A/D Result=40 06:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:41 Get A/D filter: -9.255963e+061 result=40 06:13:41 Get A/D value=-858993460 result=40 06:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:41 Parameters OK 06:13:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:41 Set A/D data flow result=40 06:13:41 Set A/D channel type result=40 06:13:41 Set A/D encoding result=40 06:13:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:41 Set channel filter=0.000000e+000 result=40 06:13:41 Config A/D Result=40 06:13:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:41 Get A/D filter: -9.255963e+061 result=40 06:13:41 Get A/D value=-858993460 result=40 06:13:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:41 Aux= 06:13:41 Message to Camera, serial 3176 queued 06:13:44 Received message from Master: op=Shutter serial=3180 06:13:44 Shutter LASER close 06:13:44 Received message from Master: op=PointingHead serial=3184 06:13:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:13:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:13:45 Point started: ret=0 06:13:45 point_skyscan result=0 06:13:46 Check angles 06:13:46 SkyScan query 06:13:46 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.875<-21525 Statuses=0009 0009 06:13:46 Msec=0 True Az=136.215 Ze=-142.875 Az status=0009 Ze status=0009 06:13:46 Check angles 06:13:46 SkyScan query 06:13:47 SkyScan query done: ret=0 az=153.72<-10248 ze=-121.89<-20126 Statuses=0009 0009 06:13:47 Msec=750 True Az=153.72 Ze=-121.89 Az status=0009 Ze status=0009 06:13:47 Check angles 06:13:47 SkyScan query 06:13:48 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.98<-18732 Statuses=0009 0009 06:13:48 Msec=1500 True Az=171.21 Ze=-100.98 Az status=0009 Ze status=0009 06:13:48 Check angles 06:13:48 SkyScan query 06:13:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 06:13:48 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 06:13:49 Check angles 06:13:49 SkyScan query 06:13:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.055<-15937 Statuses=0008 0009 06:13:49 Msec=3000 True Az=176.01 Ze=-59.055 Az status=0008 Ze status=0009 06:13:49 Check angles 06:13:49 SkyScan query 06:13:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:13:50 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:13:50 Message to Master queued w/err=0: serial=3184 error=0 06:13:55 Received message from Master: op=Filter serial=3185 06:13:55 Color wheel filter change from 0 to 0 06:13:55 FLIGetFilterPos err=0 currentPosition=0 06:13:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:13:55 Filter is already there-color wheel unchanged 06:13:55 Received message from Master: op=Shutter serial=3186 06:13:55 Shutter LASER close 06:13:55 Received message from Camera: op=State serial=3188 06:13:55 GetSingleValue result=40 Value=cccccccc 06:13:55 SkyScan query 06:13:56 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:13:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:56 Parameters OK 06:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:56 Set A/D data flow result=40 06:13:56 Set A/D channel type result=40 06:13:56 Set A/D encoding result=40 06:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:56 Set channel filter=0.000000e+000 result=40 06:13:56 Config A/D Result=40 06:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:56 Get A/D filter: -9.255963e+061 result=40 06:13:56 Get A/D value=-858993460 result=40 06:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:13:56 Parameters OK 06:13:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:13:56 Set A/D data flow result=40 06:13:56 Set A/D channel type result=40 06:13:56 Set A/D encoding result=40 06:13:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:13:56 Set channel filter=0.000000e+000 result=40 06:13:56 Config A/D Result=40 06:13:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:13:56 Get A/D filter: -9.255963e+061 result=40 06:13:56 Get A/D value=-858993460 result=40 06:13:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:13:56 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:13:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:13:56 Aux= 06:13:56 Message to Camera, serial 3188 queued 06:14:27 Received message from Master: op=PointingHead serial=3195 06:14:27 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:14:27 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:14:27 Point started: ret=0 06:14:27 point_skyscan result=0 06:14:28 Check angles 06:14:28 SkyScan query 06:14:28 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.645<-13443 Statuses=0009 0009 06:14:28 Msec=0 True Az=152.91 Ze=-21.645 Az status=0009 Ze status=0009 06:14:29 Check angles 06:14:29 SkyScan query 06:14:29 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.24<-12016 Statuses=0009 0009 06:14:29 Msec=750 True Az=135.09 Ze=-0.24 Az status=0009 Ze status=0009 06:14:29 Check angles 06:14:29 SkyScan query 06:14:30 SkyScan query done: ret=0 az=117.225<-7815 ze=21.15<-10590 Statuses=0009 0009 06:14:30 Msec=1500 True Az=117.225 Ze=21.15 Az status=0009 Ze status=0009 06:14:30 Check angles 06:14:30 SkyScan query 06:14:31 SkyScan query done: ret=0 az=99.81<-6654 ze=42.09<-9194 Statuses=0009 0009 06:14:31 Msec=2250 True Az=99.81 Ze=42.09 Az status=0009 Ze status=0009 06:14:31 Check angles 06:14:31 SkyScan query 06:14:31 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 06:14:31 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 06:14:32 Check angles 06:14:32 SkyScan query 06:14:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:14:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:14:32 Message to Master queued w/err=0: serial=3195 error=0 06:14:37 Received message from Master: op=Filter serial=3196 06:14:37 Color wheel filter change from 0 to 0 06:14:37 FLIGetFilterPos err=0 currentPosition=0 06:14:37 FLIGetStepsRemaining err=0 RemainingSteps=0 06:14:37 Filter is already there-color wheel unchanged 06:14:37 Received message from Master: op=Shutter serial=3197 06:14:37 Shutter LASER close 06:14:37 Received message from Camera: op=State serial=3199 06:14:37 GetSingleValue result=40 Value=cccccccc 06:14:37 SkyScan query 06:14:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:14:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:38 Parameters OK 06:14:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:38 Set A/D data flow result=40 06:14:38 Set A/D channel type result=40 06:14:38 Set A/D encoding result=40 06:14:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:38 Set channel filter=0.000000e+000 result=40 06:14:38 Config A/D Result=40 06:14:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:38 Get A/D filter: -9.255963e+061 result=40 06:14:38 Get A/D value=-858993460 result=40 06:14:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:14:38 Parameters OK 06:14:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:14:38 Set A/D data flow result=40 06:14:38 Set A/D channel type result=40 06:14:38 Set A/D encoding result=40 06:14:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:14:38 Set channel filter=0.000000e+000 result=40 06:14:38 Config A/D Result=40 06:14:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:14:38 Get A/D filter: -9.255963e+061 result=40 06:14:38 Get A/D value=-858993460 result=40 06:14:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:14:38 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:14:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:14:38 Aux= 06:14:38 Message to Camera, serial 3199 queued 06:15:09 Received message from Master: op=PointingHead serial=3206 06:15:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:15:09 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:15:09 Point started: ret=0 06:15:09 point_skyscan result=0 06:15:10 Check angles 06:15:10 SkyScan query 06:15:11 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 06:15:11 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 06:15:11 Check angles 06:15:11 SkyScan query 06:15:11 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 06:15:11 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 06:15:12 Check angles 06:15:12 SkyScan query 06:15:12 SkyScan query done: ret=0 az=144.735<-9649 ze=38.505<-9433 Statuses=0009 0008 06:15:12 Msec=1500 True Az=144.735 Ze=38.505 Az status=0009 Ze status=0008 06:15:12 Check angles 06:15:12 SkyScan query 06:15:13 SkyScan query done: ret=0 az=162.21<-10814 ze=38.505<-9433 Statuses=0009 0008 06:15:13 Msec=2250 True Az=162.21 Ze=38.505 Az status=0009 Ze status=0008 06:15:13 Check angles 06:15:13 SkyScan query 06:15:14 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:15:14 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:15:14 Check angles 06:15:14 SkyScan query 06:15:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:15:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:15:14 Message to Master queued w/err=0: serial=3206 error=0 06:15:19 Received message from Master: op=Filter serial=3207 06:15:19 Color wheel filter change from 0 to 0 06:15:19 FLIGetFilterPos err=0 currentPosition=0 06:15:19 FLIGetStepsRemaining err=0 RemainingSteps=0 06:15:19 Filter is already there-color wheel unchanged 06:15:20 Received message from Master: op=Shutter serial=3208 06:15:20 Shutter LASER close 06:15:20 Received message from Camera: op=State serial=3210 06:15:20 GetSingleValue result=40 Value=cccccccc 06:15:20 SkyScan query 06:15:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:15:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:20 Parameters OK 06:15:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:20 Set A/D data flow result=40 06:15:20 Set A/D channel type result=40 06:15:20 Set A/D encoding result=40 06:15:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:20 Set channel filter=0.000000e+000 result=40 06:15:20 Config A/D Result=40 06:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:20 Get A/D filter: -9.255963e+061 result=40 06:15:20 Get A/D value=-858993460 result=40 06:15:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:15:20 Parameters OK 06:15:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:15:20 Set A/D data flow result=40 06:15:20 Set A/D channel type result=40 06:15:20 Set A/D encoding result=40 06:15:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:15:20 Set channel filter=0.000000e+000 result=40 06:15:20 Config A/D Result=40 06:15:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:15:20 Get A/D filter: -9.255963e+061 result=40 06:15:20 Get A/D value=-858993460 result=40 06:15:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:15:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:15:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:15:20 Aux= 06:15:20 Message to Camera, serial 3210 queued 06:15:51 Received message from Master: op=PointingHead serial=3217 06:15:51 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:15:51 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:15:51 Point started: ret=0 06:15:51 point_skyscan result=0 06:15:52 Check angles 06:15:52 SkyScan query 06:15:53 SkyScan query done: ret=0 az=152.985<-10199 ze=8.655<-11423 Statuses=0009 0009 06:15:53 Msec=0 True Az=152.985 Ze=8.655 Az status=0009 Ze status=0009 06:15:53 Check angles 06:15:53 SkyScan query 06:15:53 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.735<-12849 Statuses=0009 0009 06:15:53 Msec=750 True Az=135.135 Ze=-12.735 Az status=0009 Ze status=0009 06:15:54 Check angles 06:15:54 SkyScan query 06:15:54 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.66<-14244 Statuses=0009 0009 06:15:54 Msec=1500 True Az=117.63 Ze=-33.66 Az status=0009 Ze status=0009 06:15:54 Check angles 06:15:54 SkyScan query 06:15:55 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.54<-15436 Statuses=0009 0009 06:15:55 Msec=2250 True Az=100.23 Ze=-51.54 Az status=0009 Ze status=0009 06:15:55 Check angles 06:15:55 SkyScan query 06:15:56 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:15:56 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:15:56 Check angles 06:15:56 SkyScan query 06:15:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:15:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:15:56 Message to Master queued w/err=0: serial=3217 error=0 06:16:01 Received message from Master: op=Filter serial=3218 06:16:01 Color wheel filter change from 0 to 0 06:16:01 FLIGetFilterPos err=0 currentPosition=0 06:16:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:01 Filter is already there-color wheel unchanged 06:16:02 Received message from Master: op=Shutter serial=3219 06:16:02 Shutter LASER close 06:16:02 Received message from Camera: op=State serial=3221 06:16:02 GetSingleValue result=40 Value=cccccccc 06:16:02 SkyScan query 06:16:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:16:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:02 Parameters OK 06:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:02 Set A/D data flow result=40 06:16:02 Set A/D channel type result=40 06:16:02 Set A/D encoding result=40 06:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:02 Set channel filter=0.000000e+000 result=40 06:16:02 Config A/D Result=40 06:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:02 Get A/D filter: -9.255963e+061 result=40 06:16:02 Get A/D value=-858993460 result=40 06:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:02 Parameters OK 06:16:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:02 Set A/D data flow result=40 06:16:02 Set A/D channel type result=40 06:16:02 Set A/D encoding result=40 06:16:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:02 Set channel filter=0.000000e+000 result=40 06:16:02 Config A/D Result=40 06:16:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:02 Get A/D filter: -9.255963e+061 result=40 06:16:02 Get A/D value=-858993460 result=40 06:16:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:02 Aux= 06:16:02 Message to Camera, serial 3221 queued 06:16:33 Received message from Master: op=PointingHead serial=3228 06:16:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:16:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:16:33 Point started: ret=0 06:16:33 point_skyscan result=0 06:16:34 Check angles 06:16:34 SkyScan query 06:16:35 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.525<-17435 Statuses=0009 0009 06:16:35 Msec=0 True Az=109.17 Ze=-81.525 Az status=0009 Ze status=0009 06:16:35 Check angles 06:16:35 SkyScan query 06:16:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.48<-18832 Statuses=0008 0009 06:16:36 Msec=750 True Az=113.01 Ze=-102.48 Az status=0008 Ze status=0009 06:16:36 Check angles 06:16:36 SkyScan query 06:16:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.42<-20228 Statuses=0008 0009 06:16:36 Msec=1500 True Az=113.01 Ze=-123.42 Az status=0008 Ze status=0009 06:16:36 Check angles 06:16:36 SkyScan query 06:16:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 06:16:37 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 06:16:37 Check angles 06:16:37 SkyScan query 06:16:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 06:16:38 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 06:16:38 Check angles 06:16:38 SkyScan query 06:16:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:16:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:16:39 Message to Master queued w/err=0: serial=3228 error=0 06:16:44 Received message from Master: op=Filter serial=3229 06:16:44 Color wheel filter change from 0 to 0 06:16:44 FLIGetFilterPos err=0 currentPosition=0 06:16:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:44 Filter is already there-color wheel unchanged 06:16:44 Received message from Master: op=Shutter serial=3230 06:16:44 Shutter LASER open 06:16:44 Received message from Camera: op=State serial=3232 06:16:44 GetSingleValue result=40 Value=cccccccc 06:16:44 SkyScan query 06:16:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:16:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:44 Parameters OK 06:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:44 Set A/D data flow result=40 06:16:44 Set A/D channel type result=40 06:16:44 Set A/D encoding result=40 06:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:44 Set channel filter=0.000000e+000 result=40 06:16:44 Config A/D Result=40 06:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:44 Get A/D filter: -9.255963e+061 result=40 06:16:44 Get A/D value=-858993460 result=40 06:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:44 Parameters OK 06:16:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:44 Set A/D data flow result=40 06:16:44 Set A/D channel type result=40 06:16:44 Set A/D encoding result=40 06:16:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:44 Set channel filter=0.000000e+000 result=40 06:16:44 Config A/D Result=40 06:16:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:44 Get A/D filter: -9.255963e+061 result=40 06:16:44 Get A/D value=-858993460 result=40 06:16:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:44 Aux= 06:16:44 Message to Camera, serial 3232 queued 06:16:47 Received message from Master: op=Shutter serial=3236 06:16:47 Shutter LASER close 06:16:47 Received message from Master: op=PointingHead serial=3240 06:16:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:16:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:16:48 Point started: ret=0 06:16:48 point_skyscan result=0 06:16:48 Check angles 06:16:48 SkyScan query 06:16:49 SkyScan query done: ret=0 az=89.28<-5952 ze=156.84<-1544 Statuses=0009 0009 06:16:49 Msec=0 True Az=89.28 Ze=156.84 Az status=0009 Ze status=0009 06:16:49 Check angles 06:16:49 SkyScan query 06:16:50 SkyScan query done: ret=0 az=71.91<-4794 ze=135.855<-2943 Statuses=0009 0009 06:16:50 Msec=750 True Az=71.91 Ze=135.855 Az status=0009 Ze status=0009 06:16:50 Check angles 06:16:50 SkyScan query 06:16:51 SkyScan query done: ret=0 az=54.645<-3643 ze=114.93<-4338 Statuses=0009 0009 06:16:51 Msec=1500 True Az=54.645 Ze=114.93 Az status=0009 Ze status=0009 06:16:51 Check angles 06:16:51 SkyScan query 06:16:51 SkyScan query done: ret=0 az=40.875<-2725 ze=93.945<-5737 Statuses=0009 0009 06:16:51 Msec=2250 True Az=40.875 Ze=93.945 Az status=0009 Ze status=0009 06:16:51 Check angles 06:16:51 SkyScan query 06:16:52 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 06:16:52 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 06:16:52 Check angles 06:16:52 SkyScan query 06:16:53 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 06:16:53 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 06:16:53 Check angles 06:16:53 SkyScan query 06:16:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:16:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:16:54 Message to Master queued w/err=0: serial=3240 error=0 06:16:59 Received message from Master: op=Filter serial=3241 06:16:59 Color wheel filter change from 0 to 0 06:16:59 FLIGetFilterPos err=0 currentPosition=0 06:16:59 FLIGetStepsRemaining err=0 RemainingSteps=0 06:16:59 Filter is already there-color wheel unchanged 06:16:59 Received message from Master: op=Shutter serial=3242 06:16:59 Shutter LASER close 06:16:59 Received message from Camera: op=State serial=3244 06:16:59 GetSingleValue result=40 Value=cccccccc 06:16:59 SkyScan query 06:16:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:16:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:59 Parameters OK 06:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:59 Set A/D data flow result=40 06:16:59 Set A/D channel type result=40 06:16:59 Set A/D encoding result=40 06:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:59 Set channel filter=0.000000e+000 result=40 06:16:59 Config A/D Result=40 06:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:59 Get A/D filter: -9.255963e+061 result=40 06:16:59 Get A/D value=-858993460 result=40 06:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:16:59 Parameters OK 06:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:16:59 Set A/D data flow result=40 06:16:59 Set A/D channel type result=40 06:16:59 Set A/D encoding result=40 06:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:16:59 Set channel filter=0.000000e+000 result=40 06:16:59 Config A/D Result=40 06:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:16:59 Get A/D filter: -9.255963e+061 result=40 06:16:59 Get A/D value=-858993460 result=40 06:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:16:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:16:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:16:59 Aux= 06:16:59 Message to Camera, serial 3244 queued 06:17:30 Received message from Master: op=PointingHead serial=3251 06:17:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:17:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:17:31 Point started: ret=0 06:17:31 point_skyscan result=0 06:17:31 Check angles 06:17:31 SkyScan query 06:17:32 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 06:17:32 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 06:17:32 Check angles 06:17:32 SkyScan query 06:17:33 SkyScan query done: ret=0 az=81.3<-5420 ze=66.51<-7566 Statuses=0009 0008 06:17:33 Msec=750 True Az=81.3 Ze=66.51 Az status=0009 Ze status=0008 06:17:33 Check angles 06:17:33 SkyScan query 06:17:33 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 06:17:33 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 06:17:34 Check angles 06:17:34 SkyScan query 06:17:34 SkyScan query done: ret=0 az=116.31<-7754 ze=66.495<-7567 Statuses=0009 0008 06:17:34 Msec=2250 True Az=116.31 Ze=66.495 Az status=0009 Ze status=0008 06:17:34 Check angles 06:17:34 SkyScan query 06:17:35 SkyScan query done: ret=0 az=134.13<-8942 ze=66.495<-7567 Statuses=0009 0008 06:17:35 Msec=3000 True Az=134.13 Ze=66.495 Az status=0009 Ze status=0008 06:17:35 Check angles 06:17:35 SkyScan query 06:17:36 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 06:17:36 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 06:17:36 Check angles 06:17:36 SkyScan query 06:17:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:17:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:17:36 Message to Master queued w/err=0: serial=3251 error=0 06:17:41 Received message from Master: op=Filter serial=3252 06:17:41 Color wheel filter change from 0 to 0 06:17:41 FLIGetFilterPos err=0 currentPosition=0 06:17:41 FLIGetStepsRemaining err=0 RemainingSteps=0 06:17:41 Filter is already there-color wheel unchanged 06:17:42 Received message from Master: op=Shutter serial=3253 06:17:42 Shutter LASER close 06:17:42 Received message from Camera: op=State serial=3255 06:17:42 GetSingleValue result=40 Value=cccccccc 06:17:42 SkyScan query 06:17:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:17:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:42 Parameters OK 06:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:42 Set A/D data flow result=40 06:17:42 Set A/D channel type result=40 06:17:42 Set A/D encoding result=40 06:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:42 Set channel filter=0.000000e+000 result=40 06:17:42 Config A/D Result=40 06:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:42 Get A/D filter: -9.255963e+061 result=40 06:17:42 Get A/D value=-858993460 result=40 06:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:17:42 Parameters OK 06:17:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:17:42 Set A/D data flow result=40 06:17:42 Set A/D channel type result=40 06:17:42 Set A/D encoding result=40 06:17:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:17:42 Set channel filter=0.000000e+000 result=40 06:17:42 Config A/D Result=40 06:17:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:17:42 Get A/D filter: -9.255963e+061 result=40 06:17:42 Get A/D value=-858993460 result=40 06:17:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:17:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:17:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:17:42 Aux= 06:17:42 Message to Camera, serial 3255 queued 06:18:13 Received message from Master: op=PointingHead serial=3262 06:18:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:18:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:18:13 Point started: ret=0 06:18:13 point_skyscan result=0 06:18:14 Check angles 06:18:14 SkyScan query 06:18:15 SkyScan query done: ret=0 az=134.64<-8976 ze=36.27<-9582 Statuses=0009 0009 06:18:15 Msec=0 True Az=134.64 Ze=36.27 Az status=0009 Ze status=0009 06:18:15 Check angles 06:18:15 SkyScan query 06:18:16 SkyScan query done: ret=0 az=117.075<-7805 ze=15.315<-10979 Statuses=0009 0009 06:18:16 Msec=750 True Az=117.075 Ze=15.315 Az status=0009 Ze status=0009 06:18:16 Check angles 06:18:16 SkyScan query 06:18:16 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.64<-12376 Statuses=0009 0009 06:18:16 Msec=1500 True Az=99.78 Ze=-5.64 Az status=0009 Ze status=0009 06:18:16 Check angles 06:18:16 SkyScan query 06:18:17 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.595<-13773 Statuses=0009 0009 06:18:17 Msec=2250 True Az=82.23 Ze=-26.595 Az status=0009 Ze status=0009 06:18:17 Check angles 06:18:17 SkyScan query 06:18:18 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.55<-14570 Statuses=0009 0008 06:18:18 Msec=3000 True Az=64.725 Ze=-38.55 Az status=0009 Ze status=0008 06:18:18 Check angles 06:18:18 SkyScan query 06:18:19 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.535<-14569 Statuses=0009 0008 06:18:19 Msec=3750 True Az=47.355 Ze=-38.535 Az status=0009 Ze status=0008 06:18:19 Check angles 06:18:19 SkyScan query 06:18:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:18:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:18:19 Message to Master queued w/err=0: serial=3262 error=0 06:18:24 Received message from Master: op=Filter serial=3263 06:18:24 Color wheel filter change from 0 to 0 06:18:24 FLIGetFilterPos err=0 currentPosition=0 06:18:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:18:24 Filter is already there-color wheel unchanged 06:18:24 Received message from Master: op=Shutter serial=3264 06:18:24 Shutter LASER close 06:18:25 Received message from Camera: op=State serial=3266 06:18:25 GetSingleValue result=40 Value=cccccccc 06:18:25 SkyScan query 06:18:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:18:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:25 Parameters OK 06:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:25 Set A/D data flow result=40 06:18:25 Set A/D channel type result=40 06:18:25 Set A/D encoding result=40 06:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:25 Set channel filter=0.000000e+000 result=40 06:18:25 Config A/D Result=40 06:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:25 Get A/D filter: -9.255963e+061 result=40 06:18:25 Get A/D value=-858993460 result=40 06:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:18:25 Parameters OK 06:18:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:18:25 Set A/D data flow result=40 06:18:25 Set A/D channel type result=40 06:18:25 Set A/D encoding result=40 06:18:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:18:25 Set channel filter=0.000000e+000 result=40 06:18:25 Config A/D Result=40 06:18:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:18:25 Get A/D filter: -9.255963e+061 result=40 06:18:25 Get A/D value=-858993460 result=40 06:18:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:18:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:18:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:18:25 Aux= 06:18:25 Message to Camera, serial 3266 queued 06:18:56 Received message from Master: op=PointingHead serial=3273 06:18:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:18:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:18:56 Point started: ret=0 06:18:56 point_skyscan result=0 06:18:57 Check angles 06:18:57 SkyScan query 06:18:58 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.115<-16541 Statuses=0009 0009 06:18:58 Msec=0 True Az=63.78 Ze=-68.115 Az status=0009 Ze status=0009 06:18:58 Check angles 06:18:58 SkyScan query 06:18:58 SkyScan query done: ret=0 az=81.3<-5420 ze=-89.085<-17939 Statuses=0009 0009 06:18:58 Msec=750 True Az=81.3 Ze=-89.085 Az status=0009 Ze status=0009 06:18:59 Check angles 06:18:59 SkyScan query 06:18:59 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.04<-19336 Statuses=0009 0009 06:18:59 Msec=1500 True Az=98.91 Ze=-110.04 Az status=0009 Ze status=0009 06:18:59 Check angles 06:18:59 SkyScan query 06:19:00 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.4<-20760 Statuses=0009 0009 06:19:00 Msec=2250 True Az=116.715 Ze=-131.4 Az status=0009 Ze status=0009 06:19:00 Check angles 06:19:00 SkyScan query 06:19:01 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 06:19:01 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 06:19:01 Check angles 06:19:01 SkyScan query 06:19:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:19:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:19:01 Message to Master queued w/err=0: serial=3273 error=0 06:19:06 Received message from Master: op=Filter serial=3274 06:19:06 Color wheel filter change from 0 to 0 06:19:06 FLIGetFilterPos err=0 currentPosition=0 06:19:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:06 Filter is already there-color wheel unchanged 06:19:07 Received message from Master: op=Shutter serial=3275 06:19:07 Shutter LASER close 06:19:07 Received message from Camera: op=State serial=3277 06:19:07 GetSingleValue result=40 Value=cccccccc 06:19:07 SkyScan query 06:19:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:19:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:07 Parameters OK 06:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:07 Set A/D data flow result=40 06:19:07 Set A/D channel type result=40 06:19:07 Set A/D encoding result=40 06:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:07 Set channel filter=0.000000e+000 result=40 06:19:07 Config A/D Result=40 06:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:07 Get A/D filter: -9.255963e+061 result=40 06:19:07 Get A/D value=-858993460 result=40 06:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:07 Parameters OK 06:19:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:07 Set A/D data flow result=40 06:19:07 Set A/D channel type result=40 06:19:07 Set A/D encoding result=40 06:19:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:07 Set channel filter=0.000000e+000 result=40 06:19:07 Config A/D Result=40 06:19:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:07 Get A/D filter: -9.255963e+061 result=40 06:19:07 Get A/D value=-858993460 result=40 06:19:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:07 Aux= 06:19:07 Message to Camera, serial 3277 queued 06:19:38 Received message from Master: op=PointingHead serial=3284 06:19:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:19:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:19:38 Point started: ret=0 06:19:38 point_skyscan result=0 06:19:39 Check angles 06:19:39 SkyScan query 06:19:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 06:19:40 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 06:19:40 Check angles 06:19:40 SkyScan query 06:19:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:19:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:19:40 Message to Master queued w/err=0: serial=3284 error=0 06:19:45 Received message from Master: op=Filter serial=3285 06:19:45 Color wheel filter change from 0 to 0 06:19:45 FLIGetFilterPos err=0 currentPosition=0 06:19:45 FLIGetStepsRemaining err=0 RemainingSteps=0 06:19:45 Filter is already there-color wheel unchanged 06:19:46 Received message from Master: op=Shutter serial=3286 06:19:46 Shutter LASER open 06:19:46 Received message from Camera: op=State serial=3288 06:19:46 GetSingleValue result=40 Value=cccccccc 06:19:46 SkyScan query 06:19:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:19:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:46 Parameters OK 06:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:46 Set A/D data flow result=40 06:19:46 Set A/D channel type result=40 06:19:46 Set A/D encoding result=40 06:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:46 Set channel filter=0.000000e+000 result=40 06:19:46 Config A/D Result=40 06:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:46 Get A/D filter: -9.255963e+061 result=40 06:19:46 Get A/D value=-858993460 result=40 06:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:19:46 Parameters OK 06:19:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:19:46 Set A/D data flow result=40 06:19:46 Set A/D channel type result=40 06:19:46 Set A/D encoding result=40 06:19:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:19:46 Set channel filter=0.000000e+000 result=40 06:19:46 Config A/D Result=40 06:19:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:19:46 Get A/D filter: -9.255963e+061 result=40 06:19:46 Get A/D value=-858993460 result=40 06:19:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:19:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:19:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:19:46 Aux= 06:19:46 Message to Camera, serial 3288 queued 06:19:49 Received message from Master: op=Shutter serial=3292 06:19:49 Shutter LASER close 06:19:49 Received message from Master: op=PointingHead serial=3296 06:19:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:19:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:19:50 Point started: ret=0 06:19:50 point_skyscan result=0 06:19:50 Check angles 06:19:50 SkyScan query 06:19:51 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 06:19:51 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 06:19:51 Check angles 06:19:51 SkyScan query 06:19:52 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.58<-20172 Statuses=0009 0009 06:19:52 Msec=750 True Az=153.225 Ze=-122.58 Az status=0009 Ze status=0009 06:19:52 Check angles 06:19:52 SkyScan query 06:19:53 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.61<-18774 Statuses=0009 0009 06:19:53 Msec=1500 True Az=170.7 Ze=-101.61 Az status=0009 Ze status=0009 06:19:53 Check angles 06:19:53 SkyScan query 06:19:53 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.655<-17377 Statuses=0008 0009 06:19:53 Msec=2250 True Az=176.025 Ze=-80.655 Az status=0008 Ze status=0009 06:19:53 Check angles 06:19:53 SkyScan query 06:19:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.7<-15980 Statuses=0008 0009 06:19:54 Msec=3000 True Az=175.995 Ze=-59.7 Az status=0008 Ze status=0009 06:19:54 Check angles 06:19:54 SkyScan query 06:19:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:19:55 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:19:55 Message to Master queued w/err=0: serial=3296 error=0 06:20:00 Received message from Master: op=Filter serial=3297 06:20:00 Color wheel filter change from 0 to 0 06:20:00 FLIGetFilterPos err=0 currentPosition=0 06:20:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:00 Filter is already there-color wheel unchanged 06:20:00 Received message from Master: op=Shutter serial=3298 06:20:00 Shutter LASER close 06:20:00 Received message from Camera: op=State serial=3300 06:20:00 GetSingleValue result=40 Value=cccccccc 06:20:00 SkyScan query 06:20:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:20:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:01 Parameters OK 06:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:01 Set A/D data flow result=40 06:20:01 Set A/D channel type result=40 06:20:01 Set A/D encoding result=40 06:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:01 Set channel filter=0.000000e+000 result=40 06:20:01 Config A/D Result=40 06:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:01 Get A/D filter: -9.255963e+061 result=40 06:20:01 Get A/D value=-858993460 result=40 06:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:01 Parameters OK 06:20:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:01 Set A/D data flow result=40 06:20:01 Set A/D channel type result=40 06:20:01 Set A/D encoding result=40 06:20:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:01 Set channel filter=0.000000e+000 result=40 06:20:01 Config A/D Result=40 06:20:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:01 Get A/D filter: -9.255963e+061 result=40 06:20:01 Get A/D value=-858993460 result=40 06:20:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:01 Aux= 06:20:01 Message to Camera, serial 3300 queued 06:20:32 Received message from Master: op=PointingHead serial=3307 06:20:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:20:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:20:32 Point started: ret=0 06:20:32 point_skyscan result=0 06:20:33 Check angles 06:20:33 SkyScan query 06:20:33 SkyScan query done: ret=0 az=152.565<-10171 ze=-21.165<-13411 Statuses=0009 0009 06:20:33 Msec=0 True Az=152.565 Ze=-21.165 Az status=0009 Ze status=0009 06:20:34 Check angles 06:20:34 SkyScan query 06:20:34 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.225<-12015 Statuses=0009 0009 06:20:34 Msec=750 True Az=135.03 Ze=-0.225 Az status=0009 Ze status=0009 06:20:34 Check angles 06:20:34 SkyScan query 06:20:35 SkyScan query done: ret=0 az=117.525<-7835 ze=20.73<-10618 Statuses=0009 0009 06:20:35 Msec=1500 True Az=117.525 Ze=20.73 Az status=0009 Ze status=0009 06:20:35 Check angles 06:20:35 SkyScan query 06:20:36 SkyScan query done: ret=0 az=100.14<-6676 ze=41.7<-9220 Statuses=0009 0009 [UTC 2018-12-4 06:20:36] 06:20:36 Msec=2250 True Az=100.14 Ze=41.7 Az status=0009 Ze status=0009 06:20:36 Check angles 06:20:36 SkyScan query 06:20:36 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:20:36 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:20:37 Check angles 06:20:37 SkyScan query 06:20:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:20:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:20:37 Message to Master queued w/err=0: serial=3307 error=0 06:20:42 Received message from Master: op=Filter serial=3308 06:20:42 Color wheel filter change from 0 to 0 06:20:42 FLIGetFilterPos err=0 currentPosition=0 06:20:42 FLIGetStepsRemaining err=0 RemainingSteps=0 06:20:42 Filter is already there-color wheel unchanged 06:20:42 Received message from Master: op=Shutter serial=3309 06:20:42 Shutter LASER close 06:20:42 Received message from Camera: op=State serial=3311 06:20:42 GetSingleValue result=40 Value=cccccccc 06:20:42 SkyScan query 06:20:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:20:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:43 Parameters OK 06:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:43 Set A/D data flow result=40 06:20:43 Set A/D channel type result=40 06:20:43 Set A/D encoding result=40 06:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:43 Set channel filter=0.000000e+000 result=40 06:20:43 Config A/D Result=40 06:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:43 Get A/D filter: -9.255963e+061 result=40 06:20:43 Get A/D value=-858993460 result=40 06:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:20:43 Parameters OK 06:20:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:20:43 Set A/D data flow result=40 06:20:43 Set A/D channel type result=40 06:20:43 Set A/D encoding result=40 06:20:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:20:43 Set channel filter=0.000000e+000 result=40 06:20:43 Config A/D Result=40 06:20:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:20:43 Get A/D filter: -9.255963e+061 result=40 06:20:43 Get A/D value=-858993460 result=40 06:20:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:20:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:20:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:20:43 Aux= 06:20:43 Message to Camera, serial 3311 queued 06:21:14 Received message from Master: op=PointingHead serial=3318 06:21:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:21:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:21:14 Point started: ret=0 06:21:14 point_skyscan result=0 06:21:15 Check angles 06:21:15 SkyScan query 06:21:15 SkyScan query done: ret=0 az=108.705<-7247 ze=38.49<-9434 Statuses=0009 0008 06:21:15 Msec=0 True Az=108.705 Ze=38.49 Az status=0009 Ze status=0008 06:21:16 Check angles 06:21:16 SkyScan query 06:21:16 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 06:21:16 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 06:21:16 Check angles 06:21:16 SkyScan query 06:21:17 SkyScan query done: ret=0 az=144.165<-9611 ze=38.505<-9433 Statuses=0009 0008 06:21:17 Msec=1500 True Az=144.165 Ze=38.505 Az status=0009 Ze status=0008 06:21:17 Check angles 06:21:17 SkyScan query 06:21:18 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 06:21:18 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 06:21:18 Check angles 06:21:18 SkyScan query 06:21:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:21:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:21:19 Check angles 06:21:19 SkyScan query 06:21:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:21:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:21:19 Message to Master queued w/err=0: serial=3318 error=0 06:21:24 Received message from Master: op=Filter serial=3319 06:21:24 Color wheel filter change from 0 to 0 06:21:24 FLIGetFilterPos err=0 currentPosition=0 06:21:24 FLIGetStepsRemaining err=0 RemainingSteps=0 06:21:24 Filter is already there-color wheel unchanged 06:21:24 Received message from Master: op=Shutter serial=3320 06:21:24 Shutter LASER close 06:21:24 Received message from Camera: op=State serial=3322 06:21:24 GetSingleValue result=40 Value=cccccccc 06:21:24 SkyScan query 06:21:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:21:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:25 Parameters OK 06:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:25 Set A/D data flow result=40 06:21:25 Set A/D channel type result=40 06:21:25 Set A/D encoding result=40 06:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:25 Set channel filter=0.000000e+000 result=40 06:21:25 Config A/D Result=40 06:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:25 Get A/D filter: -9.255963e+061 result=40 06:21:25 Get A/D value=-858993460 result=40 06:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:21:25 Parameters OK 06:21:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:21:25 Set A/D data flow result=40 06:21:25 Set A/D channel type result=40 06:21:25 Set A/D encoding result=40 06:21:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:21:25 Set channel filter=0.000000e+000 result=40 06:21:25 Config A/D Result=40 06:21:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:21:25 Get A/D filter: -9.255963e+061 result=40 06:21:25 Get A/D value=-858993460 result=40 06:21:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:21:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:21:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:21:25 Aux= 06:21:25 Message to Camera, serial 3322 queued 06:21:49 Received message from Master: op=Identify serial=3323 06:21:56 Received message from Master: op=PointingHead serial=3332 06:21:56 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:21:56 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:21:56 Point started: ret=0 06:21:56 point_skyscan result=0 06:21:57 Check angles 06:21:57 SkyScan query 06:21:57 SkyScan query done: ret=0 az=152.79<-10186 ze=8.445<-11437 Statuses=0009 0009 06:21:57 Msec=0 True Az=152.79 Ze=8.445 Az status=0009 Ze status=0009 06:21:58 Check angles 06:21:58 SkyScan query 06:21:58 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.495<-12833 Statuses=0009 0009 06:21:58 Msec=750 True Az=135.42 Ze=-12.495 Az status=0009 Ze status=0009 06:21:58 Check angles 06:21:58 SkyScan query 06:21:59 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.435<-14229 Statuses=0009 0009 06:21:59 Msec=1500 True Az=117.87 Ze=-33.435 Az status=0009 Ze status=0009 06:21:59 Check angles 06:21:59 SkyScan query 06:22:00 SkyScan query done: ret=0 az=100.05<-6670 ze=-51.555<-15437 Statuses=0009 0009 06:22:00 Msec=2250 True Az=100.05 Ze=-51.555 Az status=0009 Ze status=0009 06:22:00 Check angles 06:22:00 SkyScan query 06:22:01 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:22:01 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:22:01 Check angles 06:22:01 SkyScan query 06:22:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:22:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:22:01 Message to Master queued w/err=0: serial=3332 error=0 06:22:06 Received message from Master: op=Filter serial=3333 06:22:06 Color wheel filter change from 0 to 0 06:22:06 FLIGetFilterPos err=0 currentPosition=0 06:22:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:06 Filter is already there-color wheel unchanged 06:22:06 Received message from Master: op=Shutter serial=3334 06:22:06 Shutter LASER close 06:22:06 Received message from Camera: op=State serial=3336 06:22:06 GetSingleValue result=40 Value=cccccccc 06:22:06 SkyScan query 06:22:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:22:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:07 Parameters OK 06:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:07 Set A/D data flow result=40 06:22:07 Set A/D channel type result=40 06:22:07 Set A/D encoding result=40 06:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:07 Set channel filter=0.000000e+000 result=40 06:22:07 Config A/D Result=40 06:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:07 Get A/D filter: -9.255963e+061 result=40 06:22:07 Get A/D value=-858993460 result=40 06:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:07 Parameters OK 06:22:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:07 Set A/D data flow result=40 06:22:07 Set A/D channel type result=40 06:22:07 Set A/D encoding result=40 06:22:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:07 Set channel filter=0.000000e+000 result=40 06:22:07 Config A/D Result=40 06:22:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:07 Get A/D filter: -9.255963e+061 result=40 06:22:07 Get A/D value=-858993460 result=40 06:22:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:07 Aux= 06:22:07 Message to Camera, serial 3336 queued 06:22:38 Received message from Master: op=PointingHead serial=3343 06:22:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:22:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:22:38 Point started: ret=0 06:22:38 point_skyscan result=0 06:22:39 Check angles 06:22:39 SkyScan query 06:22:40 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.66<-17444 Statuses=0009 0009 06:22:40 Msec=0 True Az=109.395 Ze=-81.66 Az status=0009 Ze status=0009 06:22:40 Check angles 06:22:40 SkyScan query 06:22:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 06:22:40 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 06:22:41 Check angles 06:22:41 SkyScan query 06:22:41 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.585<-20239 Statuses=0008 0009 06:22:41 Msec=1500 True Az=113.01 Ze=-123.585 Az status=0008 Ze status=0009 06:22:41 Check angles 06:22:41 SkyScan query 06:22:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.93<-21662 Statuses=0008 0009 06:22:42 Msec=2250 True Az=112.995 Ze=-144.93 Az status=0008 Ze status=0009 06:22:42 Check angles 06:22:42 SkyScan query 06:22:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-165.885<-23059 Statuses=0008 0009 06:22:43 Msec=3000 True Az=113.01 Ze=-165.885 Az status=0008 Ze status=0009 06:22:43 Check angles 06:22:43 SkyScan query 06:22:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:22:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:22:43 Message to Master queued w/err=0: serial=3343 error=0 06:22:48 Received message from Master: op=Filter serial=3344 06:22:48 Color wheel filter change from 0 to 0 06:22:48 FLIGetFilterPos err=0 currentPosition=0 06:22:48 FLIGetStepsRemaining err=0 RemainingSteps=0 06:22:48 Filter is already there-color wheel unchanged 06:22:49 Received message from Master: op=Shutter serial=3345 06:22:49 Shutter LASER open 06:22:49 Received message from Camera: op=State serial=3347 06:22:49 GetSingleValue result=40 Value=cccccccc 06:22:49 SkyScan query 06:22:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:22:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:49 Parameters OK 06:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:49 Set A/D data flow result=40 06:22:49 Set A/D channel type result=40 06:22:49 Set A/D encoding result=40 06:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:49 Set channel filter=0.000000e+000 result=40 06:22:49 Config A/D Result=40 06:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:49 Get A/D filter: -9.255963e+061 result=40 06:22:49 Get A/D value=-858993460 result=40 06:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:22:49 Parameters OK 06:22:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:22:49 Set A/D data flow result=40 06:22:49 Set A/D channel type result=40 06:22:49 Set A/D encoding result=40 06:22:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:22:49 Set channel filter=0.000000e+000 result=40 06:22:49 Config A/D Result=40 06:22:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:22:49 Get A/D filter: -9.255963e+061 result=40 06:22:49 Get A/D value=-858993460 result=40 06:22:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:22:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:22:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:22:49 Aux= 06:22:49 Message to Camera, serial 3347 queued 06:22:52 Received message from Master: op=Shutter serial=3351 06:22:52 Shutter LASER close 06:22:52 Received message from Master: op=PointingHead serial=3355 06:22:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:22:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:22:53 Point started: ret=0 06:22:53 point_skyscan result=0 06:22:53 Check angles 06:22:53 SkyScan query 06:22:54 SkyScan query done: ret=0 az=89.91<-5994 ze=157.245<-1517 Statuses=0009 0009 06:22:54 Msec=0 True Az=89.91 Ze=157.245 Az status=0009 Ze status=0009 06:22:54 Check angles 06:22:54 SkyScan query 06:22:55 SkyScan query done: ret=0 az=72.615<-4841 ze=136.305<-2913 Statuses=0009 0009 06:22:55 Msec=750 True Az=72.615 Ze=136.305 Az status=0009 Ze status=0009 06:22:55 Check angles 06:22:55 SkyScan query 06:22:55 SkyScan query done: ret=0 az=54.96<-3664 ze=115.365<-4309 Statuses=0009 0009 06:22:55 Msec=1500 True Az=54.96 Ze=115.365 Az status=0009 Ze status=0009 06:22:56 Check angles 06:22:56 SkyScan query 06:22:56 SkyScan query done: ret=0 az=40.83<-2722 ze=94.38<-5708 Statuses=0009 0009 06:22:56 Msec=2250 True Az=40.83 Ze=94.38 Az status=0009 Ze status=0009 06:22:56 Check angles 06:22:56 SkyScan query 06:22:57 SkyScan query done: ret=0 az=41.01<-2734 ze=73.005<-7133 Statuses=0008 0009 06:22:57 Msec=3000 True Az=41.01 Ze=73.005 Az status=0008 Ze status=0009 06:22:57 Check angles 06:22:57 SkyScan query 06:22:58 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 06:22:58 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 06:22:58 Check angles 06:22:58 SkyScan query 06:22:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:22:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:22:58 Message to Master queued w/err=0: serial=3355 error=0 06:23:03 Received message from Master: op=Filter serial=3356 06:23:03 Color wheel filter change from 0 to 0 06:23:03 FLIGetFilterPos err=0 currentPosition=0 06:23:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:03 Filter is already there-color wheel unchanged 06:23:04 Received message from Master: op=Shutter serial=3357 06:23:04 Shutter LASER close 06:23:04 Received message from Camera: op=State serial=3359 06:23:04 GetSingleValue result=40 Value=cccccccc 06:23:04 SkyScan query 06:23:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:23:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:04 Parameters OK 06:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:04 Set A/D data flow result=40 06:23:04 Set A/D channel type result=40 06:23:04 Set A/D encoding result=40 06:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:04 Set channel filter=0.000000e+000 result=40 06:23:04 Config A/D Result=40 06:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:04 Get A/D filter: -9.255963e+061 result=40 06:23:04 Get A/D value=-858993460 result=40 06:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:04 Parameters OK 06:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:04 Set A/D data flow result=40 06:23:04 Set A/D channel type result=40 06:23:04 Set A/D encoding result=40 06:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:04 Set channel filter=0.000000e+000 result=40 06:23:04 Config A/D Result=40 06:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:04 Get A/D filter: -9.255963e+061 result=40 06:23:04 Get A/D value=-858993460 result=40 06:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:04 Aux= 06:23:04 Message to Camera, serial 3359 queued 06:23:35 Received message from Master: op=PointingHead serial=3366 06:23:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:23:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:23:35 Point started: ret=0 06:23:35 point_skyscan result=0 06:23:36 Check angles 06:23:36 SkyScan query 06:23:37 SkyScan query done: ret=0 az=63.825<-4255 ze=66.54<-7564 Statuses=0009 0008 06:23:37 Msec=0 True Az=63.825 Ze=66.54 Az status=0009 Ze status=0008 06:23:37 Check angles 06:23:37 SkyScan query 06:23:38 SkyScan query done: ret=0 az=81.18<-5412 ze=66.51<-7566 Statuses=0009 0008 06:23:38 Msec=750 True Az=81.18 Ze=66.51 Az status=0009 Ze status=0008 06:23:38 Check angles 06:23:38 SkyScan query 06:23:38 SkyScan query done: ret=0 az=98.925<-6595 ze=66.495<-7567 Statuses=0009 0008 06:23:38 Msec=1500 True Az=98.925 Ze=66.495 Az status=0009 Ze status=0008 06:23:38 Check angles 06:23:38 SkyScan query 06:23:39 SkyScan query done: ret=0 az=116.31<-7754 ze=66.495<-7567 Statuses=0009 0008 06:23:39 Msec=2250 True Az=116.31 Ze=66.495 Az status=0009 Ze status=0008 06:23:39 Check angles 06:23:39 SkyScan query 06:23:40 SkyScan query done: ret=0 az=133.62<-8908 ze=66.495<-7567 Statuses=0009 0008 06:23:40 Msec=3000 True Az=133.62 Ze=66.495 Az status=0009 Ze status=0008 06:23:40 Check angles 06:23:40 SkyScan query 06:23:41 SkyScan query done: ret=0 az=151.14<-10076 ze=66.495<-7567 Statuses=0009 0008 06:23:41 Msec=3750 True Az=151.14 Ze=66.495 Az status=0009 Ze status=0008 06:23:41 Check angles 06:23:41 SkyScan query 06:23:41 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:23:41 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:23:41 Message to Master queued w/err=0: serial=3366 error=0 06:23:46 Received message from Master: op=Filter serial=3367 06:23:46 Color wheel filter change from 0 to 0 06:23:46 FLIGetFilterPos err=0 currentPosition=0 06:23:46 FLIGetStepsRemaining err=0 RemainingSteps=0 06:23:46 Filter is already there-color wheel unchanged 06:23:46 Received message from Master: op=Shutter serial=3368 06:23:46 Shutter LASER close 06:23:47 Received message from Camera: op=State serial=3370 06:23:47 GetSingleValue result=40 Value=cccccccc 06:23:47 SkyScan query 06:23:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:23:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:47 Parameters OK 06:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:47 Set A/D data flow result=40 06:23:47 Set A/D channel type result=40 06:23:47 Set A/D encoding result=40 06:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:47 Set channel filter=0.000000e+000 result=40 06:23:47 Config A/D Result=40 06:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:47 Get A/D filter: -9.255963e+061 result=40 06:23:47 Get A/D value=-858993460 result=40 06:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:23:47 Parameters OK 06:23:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:23:47 Set A/D data flow result=40 06:23:47 Set A/D channel type result=40 06:23:47 Set A/D encoding result=40 06:23:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:23:47 Set channel filter=0.000000e+000 result=40 06:23:47 Config A/D Result=40 06:23:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:23:47 Get A/D filter: -9.255963e+061 result=40 06:23:47 Get A/D value=-858993460 result=40 06:23:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:23:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:23:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:23:47 Aux= 06:23:47 Message to Camera, serial 3370 queued 06:24:18 Received message from Master: op=PointingHead serial=3377 06:24:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:24:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:24:18 Point started: ret=0 06:24:18 point_skyscan result=0 06:24:19 Check angles 06:24:19 SkyScan query 06:24:20 SkyScan query done: ret=0 az=134.88<-8992 ze=36.585<-9561 Statuses=0009 0009 06:24:20 Msec=0 True Az=134.88 Ze=36.585 Az status=0009 Ze status=0009 06:24:20 Check angles 06:24:20 SkyScan query 06:24:20 SkyScan query done: ret=0 az=117.015<-7801 ze=15.195<-10987 Statuses=0009 0009 06:24:20 Msec=750 True Az=117.015 Ze=15.195 Az status=0009 Ze status=0009 06:24:21 Check angles 06:24:21 SkyScan query 06:24:21 SkyScan query done: ret=0 az=99.18<-6612 ze=-6.21<-12414 Statuses=0009 0009 06:24:21 Msec=1500 True Az=99.18 Ze=-6.21 Az status=0009 Ze status=0009 06:24:21 Check angles 06:24:21 SkyScan query 06:24:22 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.165<-13811 Statuses=0009 0009 06:24:22 Msec=2250 True Az=81.81 Ze=-27.165 Az status=0009 Ze status=0009 06:24:22 Check angles 06:24:22 SkyScan query 06:24:23 SkyScan query done: ret=0 az=64.32<-4288 ze=-38.565<-14571 Statuses=0009 0008 06:24:23 Msec=3000 True Az=64.32 Ze=-38.565 Az status=0009 Ze status=0008 06:24:23 Check angles 06:24:23 SkyScan query 06:24:23 SkyScan query done: ret=0 az=46.845<-3123 ze=-38.535<-14569 Statuses=0009 0008 06:24:23 Msec=3750 True Az=46.845 Ze=-38.535 Az status=0009 Ze status=0008 06:24:24 Check angles 06:24:24 SkyScan query 06:24:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:24:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:24:24 Message to Master queued w/err=0: serial=3377 error=0 06:24:29 Received message from Master: op=Filter serial=3378 06:24:29 Color wheel filter change from 0 to 0 06:24:29 FLIGetFilterPos err=0 currentPosition=0 06:24:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:24:29 Filter is already there-color wheel unchanged 06:24:29 Received message from Master: op=Shutter serial=3379 06:24:29 Shutter LASER close 06:24:29 Received message from Camera: op=State serial=3381 06:24:29 GetSingleValue result=40 Value=cccccccc 06:24:29 SkyScan query 06:24:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:24:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:30 Parameters OK 06:24:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:30 Set A/D data flow result=40 06:24:30 Set A/D channel type result=40 06:24:30 Set A/D encoding result=40 06:24:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:30 Set channel filter=0.000000e+000 result=40 06:24:30 Config A/D Result=40 06:24:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:30 Get A/D filter: -9.255963e+061 result=40 06:24:30 Get A/D value=-858993460 result=40 06:24:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:24:30 Parameters OK 06:24:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:24:30 Set A/D data flow result=40 06:24:30 Set A/D channel type result=40 06:24:30 Set A/D encoding result=40 06:24:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:24:30 Set channel filter=0.000000e+000 result=40 06:24:30 Config A/D Result=40 06:24:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:24:30 Get A/D filter: -9.255963e+061 result=40 06:24:30 Get A/D value=-858993460 result=40 06:24:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:24:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:24:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:24:30 Aux= 06:24:30 Message to Camera, serial 3381 queued 06:25:01 Received message from Master: op=PointingHead serial=3388 06:25:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:25:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:25:01 Point started: ret=0 06:25:01 point_skyscan result=0 06:25:02 Check angles 06:25:02 SkyScan query 06:25:02 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.22<-16548 Statuses=0009 0009 06:25:02 Msec=0 True Az=63.78 Ze=-68.22 Az status=0009 Ze status=0009 06:25:03 Check angles 06:25:03 SkyScan query 06:25:03 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.19<-17946 Statuses=0009 0009 06:25:03 Msec=750 True Az=81.33 Ze=-89.19 Az status=0009 Ze status=0009 06:25:03 Check angles 06:25:03 SkyScan query 06:25:04 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.13<-19342 Statuses=0009 0009 06:25:04 Msec=1500 True Az=98.925 Ze=-110.13 Az status=0009 Ze status=0009 06:25:04 Check angles 06:25:04 SkyScan query 06:25:05 SkyScan query done: ret=0 az=116.295<-7753 ze=-131.085<-20739 Statuses=0009 0009 06:25:05 Msec=2250 True Az=116.295 Ze=-131.085 Az status=0009 Ze status=0009 06:25:05 Check angles 06:25:05 SkyScan query 06:25:05 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.525<-21435 Statuses=0009 0008 06:25:05 Msec=3000 True Az=131.04 Ze=-141.525 Az status=0009 Ze status=0008 06:25:06 Check angles 06:25:06 SkyScan query 06:25:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:25:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:25:06 Message to Master queued w/err=0: serial=3388 error=0 06:25:11 Received message from Master: op=Filter serial=3389 06:25:11 Color wheel filter change from 0 to 0 06:25:11 FLIGetFilterPos err=0 currentPosition=0 06:25:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:11 Filter is already there-color wheel unchanged 06:25:11 Received message from Master: op=Shutter serial=3390 06:25:11 Shutter LASER close 06:25:11 Received message from Camera: op=State serial=3392 06:25:11 GetSingleValue result=40 Value=cccccccc 06:25:11 SkyScan query 06:25:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:25:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:12 Parameters OK 06:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:12 Set A/D data flow result=40 06:25:12 Set A/D channel type result=40 06:25:12 Set A/D encoding result=40 06:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:12 Set channel filter=0.000000e+000 result=40 06:25:12 Config A/D Result=40 06:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:12 Get A/D filter: -9.255963e+061 result=40 06:25:12 Get A/D value=-858993460 result=40 06:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:12 Parameters OK 06:25:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:12 Set A/D data flow result=40 06:25:12 Set A/D channel type result=40 06:25:12 Set A/D encoding result=40 06:25:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:12 Set channel filter=0.000000e+000 result=40 06:25:12 Config A/D Result=40 06:25:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:12 Get A/D filter: -9.255963e+061 result=40 06:25:12 Get A/D value=-858993460 result=40 06:25:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:12 Aux= 06:25:12 Message to Camera, serial 3392 queued 06:25:43 Received message from Master: op=PointingHead serial=3399 06:25:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:25:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:25:43 Point started: ret=0 06:25:43 point_skyscan result=0 06:25:44 Check angles 06:25:44 SkyScan query 06:25:45 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.12<-23408 Statuses=0009 0009 06:25:45 Msec=0 True Az=113.025 Ze=-171.12 Az status=0009 Ze status=0009 06:25:45 Check angles 06:25:45 SkyScan query 06:25:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:25:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:25:45 Message to Master queued w/err=0: serial=3399 error=0 06:25:50 Received message from Master: op=Filter serial=3400 06:25:50 Color wheel filter change from 0 to 0 06:25:50 FLIGetFilterPos err=0 currentPosition=0 06:25:50 FLIGetStepsRemaining err=0 RemainingSteps=0 06:25:50 Filter is already there-color wheel unchanged 06:25:51 Received message from Master: op=Shutter serial=3401 06:25:51 Shutter LASER open 06:25:51 Received message from Camera: op=State serial=3403 06:25:51 GetSingleValue result=40 Value=cccccccc 06:25:51 SkyScan query 06:25:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:25:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:51 Parameters OK 06:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:51 Set A/D data flow result=40 06:25:51 Set A/D channel type result=40 06:25:51 Set A/D encoding result=40 06:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:51 Set channel filter=0.000000e+000 result=40 06:25:51 Config A/D Result=40 06:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:51 Get A/D filter: -9.255963e+061 result=40 06:25:51 Get A/D value=-858993460 result=40 06:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:25:51 Parameters OK 06:25:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:25:51 Set A/D data flow result=40 06:25:51 Set A/D channel type result=40 06:25:51 Set A/D encoding result=40 06:25:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:25:51 Set channel filter=0.000000e+000 result=40 06:25:51 Config A/D Result=40 06:25:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:25:51 Get A/D filter: -9.255963e+061 result=40 06:25:51 Get A/D value=-858993460 result=40 06:25:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:25:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:25:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:25:51 Aux= 06:25:51 Message to Camera, serial 3403 queued 06:25:54 Received message from Master: op=Shutter serial=3407 06:25:54 Shutter LASER close 06:25:54 Received message from Master: op=PointingHead serial=3411 06:25:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:25:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:25:55 Point started: ret=0 06:25:55 point_skyscan result=0 06:25:55 Check angles 06:25:55 SkyScan query 06:25:56 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.445<-21563 Statuses=0009 0009 06:25:56 Msec=0 True Az=135.96 Ze=-143.445 Az status=0009 Ze status=0009 06:25:56 Check angles 06:25:56 SkyScan query 06:25:57 SkyScan query done: ret=0 az=153.9<-10260 ze=-122.04<-20136 Statuses=0009 0009 06:25:57 Msec=750 True Az=153.9 Ze=-122.04 Az status=0009 Ze status=0009 06:25:57 Check angles 06:25:57 SkyScan query 06:25:58 SkyScan query done: ret=0 az=171.405<-11427 ze=-101.115<-18741 Statuses=0009 0009 06:25:58 Msec=1500 True Az=171.405 Ze=-101.115 Az status=0009 Ze status=0009 06:25:58 Check angles 06:25:58 SkyScan query 06:25:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.175<-17345 Statuses=0008 0009 06:25:58 Msec=2250 True Az=176.01 Ze=-80.175 Az status=0008 Ze status=0009 06:25:58 Check angles 06:25:58 SkyScan query 06:25:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 06:25:59 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 06:25:59 Check angles 06:25:59 SkyScan query 06:26:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:26:00 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:26:00 Message to Master queued w/err=0: serial=3411 error=0 06:26:05 Received message from Master: op=Filter serial=3412 06:26:05 Color wheel filter change from 0 to 0 06:26:05 FLIGetFilterPos err=0 currentPosition=0 06:26:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:05 Filter is already there-color wheel unchanged 06:26:05 Received message from Master: op=Shutter serial=3413 06:26:05 Shutter LASER close 06:26:05 Received message from Camera: op=State serial=3415 06:26:05 GetSingleValue result=40 Value=cccccccc 06:26:05 SkyScan query 06:26:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:26:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:06 Parameters OK 06:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:06 Set A/D data flow result=40 06:26:06 Set A/D channel type result=40 06:26:06 Set A/D encoding result=40 06:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:06 Set channel filter=0.000000e+000 result=40 06:26:06 Config A/D Result=40 06:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:06 Get A/D filter: -9.255963e+061 result=40 06:26:06 Get A/D value=-858993460 result=40 06:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:06 Parameters OK 06:26:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:06 Set A/D data flow result=40 06:26:06 Set A/D channel type result=40 06:26:06 Set A/D encoding result=40 06:26:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:06 Set channel filter=0.000000e+000 result=40 06:26:06 Config A/D Result=40 06:26:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:06 Get A/D filter: -9.255963e+061 result=40 06:26:06 Get A/D value=-858993460 result=40 06:26:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:06 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:06 Aux= 06:26:06 Message to Camera, serial 3415 queued 06:26:37 Received message from Master: op=PointingHead serial=3422 06:26:37 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:26:37 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:26:37 Point started: ret=0 06:26:37 point_skyscan result=0 06:26:38 Check angles 06:26:38 SkyScan query 06:26:38 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.885<-13459 Statuses=0009 0009 06:26:38 Msec=0 True Az=153.105 Ze=-21.885 Az status=0009 Ze status=0009 06:26:38 Check angles 06:26:38 SkyScan query 06:26:39 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.915<-12061 Statuses=0009 0009 06:26:39 Msec=750 True Az=135.66 Ze=-0.915 Az status=0009 Ze status=0009 06:26:39 Check angles 06:26:39 SkyScan query 06:26:40 SkyScan query done: ret=0 az=117.75<-7850 ze=20.58<-10628 Statuses=0009 0009 06:26:40 Msec=1500 True Az=117.75 Ze=20.58 Az status=0009 Ze status=0009 06:26:40 Check angles 06:26:40 SkyScan query 06:26:41 SkyScan query done: ret=0 az=99.975<-6665 ze=41.85<-9210 Statuses=0009 0009 06:26:41 Msec=2250 True Az=99.975 Ze=41.85 Az status=0009 Ze status=0009 06:26:41 Check angles 06:26:41 SkyScan query 06:26:41 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:26:41 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:26:41 Check angles 06:26:41 SkyScan query 06:26:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:26:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:26:42 Message to Master queued w/err=0: serial=3422 error=0 06:26:47 Received message from Master: op=Filter serial=3423 06:26:47 Color wheel filter change from 0 to 0 06:26:47 FLIGetFilterPos err=0 currentPosition=0 06:26:47 FLIGetStepsRemaining err=0 RemainingSteps=0 06:26:47 Filter is already there-color wheel unchanged 06:26:47 Received message from Master: op=Shutter serial=3424 06:26:47 Shutter LASER close 06:26:47 Received message from Camera: op=State serial=3426 06:26:47 GetSingleValue result=40 Value=cccccccc 06:26:47 SkyScan query 06:26:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:26:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:48 Parameters OK 06:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:48 Set A/D data flow result=40 06:26:48 Set A/D channel type result=40 06:26:48 Set A/D encoding result=40 06:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:48 Set channel filter=0.000000e+000 result=40 06:26:48 Config A/D Result=40 06:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:48 Get A/D filter: -9.255963e+061 result=40 06:26:48 Get A/D value=-858993460 result=40 06:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:26:48 Parameters OK 06:26:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:26:48 Set A/D data flow result=40 06:26:48 Set A/D channel type result=40 06:26:48 Set A/D encoding result=40 06:26:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:26:48 Set channel filter=0.000000e+000 result=40 06:26:48 Config A/D Result=40 06:26:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:26:48 Get A/D filter: -9.255963e+061 result=40 06:26:48 Get A/D value=-858993460 result=40 06:26:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:26:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:26:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:26:48 Aux= 06:26:48 Message to Camera, serial 3426 queued 06:27:19 Received message from Master: op=PointingHead serial=3433 06:27:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:27:19 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:27:19 Point started: ret=0 06:27:19 point_skyscan result=0 06:27:20 Check angles 06:27:20 SkyScan query 06:27:20 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 06:27:20 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 06:27:21 Check angles 06:27:21 SkyScan query 06:27:21 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 06:27:21 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 06:27:21 Check angles 06:27:21 SkyScan query 06:27:22 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 06:27:22 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 06:27:22 Check angles 06:27:22 SkyScan query 06:27:23 SkyScan query done: ret=0 az=162.12<-10808 ze=38.505<-9433 Statuses=0009 0008 06:27:23 Msec=2250 True Az=162.12 Ze=38.505 Az status=0009 Ze status=0008 06:27:23 Check angles 06:27:23 SkyScan query 06:27:23 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:27:23 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:27:24 Check angles 06:27:24 SkyScan query 06:27:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:27:24 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 06:27:24 Message to Master queued w/err=0: serial=3433 error=0 06:27:29 Received message from Master: op=Filter serial=3434 06:27:29 Color wheel filter change from 0 to 0 06:27:29 FLIGetFilterPos err=0 currentPosition=0 06:27:29 FLIGetStepsRemaining err=0 RemainingSteps=0 06:27:29 Filter is already there-color wheel unchanged 06:27:29 Received message from Master: op=Shutter serial=3435 06:27:29 Shutter LASER close 06:27:29 Received message from Camera: op=State serial=3437 06:27:29 GetSingleValue result=40 Value=cccccccc 06:27:29 SkyScan query 06:27:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:27:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:30 Parameters OK 06:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:30 Set A/D data flow result=40 06:27:30 Set A/D channel type result=40 06:27:30 Set A/D encoding result=40 06:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:30 Set channel filter=0.000000e+000 result=40 06:27:30 Config A/D Result=40 06:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:30 Get A/D filter: -9.255963e+061 result=40 06:27:30 Get A/D value=-858993460 result=40 06:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:27:30 Parameters OK 06:27:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:27:30 Set A/D data flow result=40 06:27:30 Set A/D channel type result=40 06:27:30 Set A/D encoding result=40 06:27:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:27:30 Set channel filter=0.000000e+000 result=40 06:27:30 Config A/D Result=40 06:27:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:27:30 Get A/D filter: -9.255963e+061 result=40 06:27:30 Get A/D value=-858993460 result=40 06:27:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:27:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:27:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:27:30 Aux= 06:27:30 Message to Camera, serial 3437 queued 06:28:01 Received message from Master: op=PointingHead serial=3444 06:28:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:28:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:28:01 Point started: ret=0 06:28:01 point_skyscan result=0 06:28:02 Check angles 06:28:02 SkyScan query 06:28:02 SkyScan query done: ret=0 az=152.76<-10184 ze=8.385<-11441 Statuses=0009 0009 06:28:02 Msec=0 True Az=152.76 Ze=8.385 Az status=0009 Ze status=0009 06:28:03 Check angles 06:28:03 SkyScan query 06:28:03 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.54<-12836 Statuses=0009 0009 06:28:03 Msec=750 True Az=135.285 Ze=-12.54 Az status=0009 Ze status=0009 06:28:03 Check angles 06:28:03 SkyScan query 06:28:04 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.93<-14262 Statuses=0009 0009 06:28:04 Msec=1500 True Az=117.465 Ze=-33.93 Az status=0009 Ze status=0009 06:28:04 Check angles 06:28:04 SkyScan query 06:28:05 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.54<-15436 Statuses=0009 0009 06:28:05 Msec=2250 True Az=100.005 Ze=-51.54 Az status=0009 Ze status=0009 06:28:05 Check angles 06:28:05 SkyScan query 06:28:05 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:28:05 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:28:06 Check angles 06:28:06 SkyScan query 06:28:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:28:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:28:06 Message to Master queued w/err=0: serial=3444 error=0 06:28:11 Received message from Master: op=Filter serial=3445 06:28:11 Color wheel filter change from 0 to 0 06:28:11 FLIGetFilterPos err=0 currentPosition=0 06:28:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:11 Filter is already there-color wheel unchanged 06:28:11 Received message from Master: op=Shutter serial=3446 06:28:11 Shutter LASER close 06:28:11 Received message from Camera: op=State serial=3448 06:28:11 GetSingleValue result=40 Value=cccccccc 06:28:11 SkyScan query 06:28:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:28:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:12 Parameters OK 06:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:12 Set A/D data flow result=40 06:28:12 Set A/D channel type result=40 06:28:12 Set A/D encoding result=40 06:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:12 Set channel filter=0.000000e+000 result=40 06:28:12 Config A/D Result=40 06:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:12 Get A/D filter: -9.255963e+061 result=40 06:28:12 Get A/D value=-858993460 result=40 06:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:12 Parameters OK 06:28:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:12 Set A/D data flow result=40 06:28:12 Set A/D channel type result=40 06:28:12 Set A/D encoding result=40 06:28:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:12 Set channel filter=0.000000e+000 result=40 06:28:12 Config A/D Result=40 06:28:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:12 Get A/D filter: -9.255963e+061 result=40 06:28:12 Get A/D value=-858993460 result=40 06:28:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:12 Aux= 06:28:12 Message to Camera, serial 3448 queued 06:28:43 Received message from Master: op=PointingHead serial=3455 06:28:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:28:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:28:43 Point started: ret=0 06:28:43 point_skyscan result=0 06:28:44 Check angles 06:28:44 SkyScan query 06:28:45 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.15<-17410 Statuses=0009 0009 06:28:45 Msec=0 True Az=108.9 Ze=-81.15 Az status=0009 Ze status=0009 06:28:45 Check angles 06:28:45 SkyScan query 06:28:45 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.105<-18807 Statuses=0008 0009 06:28:45 Msec=750 True Az=113.01 Ze=-102.105 Az status=0008 Ze status=0009 06:28:45 Check angles 06:28:45 SkyScan query 06:28:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 06:28:46 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 06:28:46 Check angles 06:28:46 SkyScan query 06:28:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 06:28:47 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 06:28:47 Check angles 06:28:47 SkyScan query 06:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 06:28:48 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 06:28:48 Check angles 06:28:48 SkyScan query 06:28:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:28:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:28:48 Message to Master queued w/err=0: serial=3455 error=0 06:28:53 Received message from Master: op=Filter serial=3456 06:28:53 Color wheel filter change from 0 to 0 06:28:53 FLIGetFilterPos err=0 currentPosition=0 06:28:53 FLIGetStepsRemaining err=0 RemainingSteps=0 06:28:53 Filter is already there-color wheel unchanged 06:28:53 Received message from Master: op=Shutter serial=3457 06:28:53 Shutter LASER open 06:28:54 Received message from Camera: op=State serial=3459 06:28:54 GetSingleValue result=40 Value=cccccccc 06:28:54 SkyScan query 06:28:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:28:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:54 Parameters OK 06:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:54 Set A/D data flow result=40 06:28:54 Set A/D channel type result=40 06:28:54 Set A/D encoding result=40 06:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:54 Set channel filter=0.000000e+000 result=40 06:28:54 Config A/D Result=40 06:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:54 Get A/D filter: -9.255963e+061 result=40 06:28:54 Get A/D value=-858993460 result=40 06:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:28:54 Parameters OK 06:28:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:28:54 Set A/D data flow result=40 06:28:54 Set A/D channel type result=40 06:28:54 Set A/D encoding result=40 06:28:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:28:54 Set channel filter=0.000000e+000 result=40 06:28:54 Config A/D Result=40 06:28:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:28:54 Get A/D filter: -9.255963e+061 result=40 06:28:54 Get A/D value=-858993460 result=40 06:28:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:28:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:28:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:28:54 Aux= 06:28:54 Message to Camera, serial 3459 queued 06:28:57 Received message from Master: op=Shutter serial=3463 06:28:57 Shutter LASER close 06:28:57 Received message from Master: op=PointingHead serial=3467 06:28:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:28:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:28:57 Point started: ret=0 06:28:57 point_skyscan result=0 06:28:58 Check angles 06:28:58 SkyScan query 06:28:59 SkyScan query done: ret=0 az=90.15<-6010 ze=157.41<-1506 Statuses=0009 0009 06:28:59 Msec=0 True Az=90.15 Ze=157.41 Az status=0009 Ze status=0009 06:28:59 Check angles 06:28:59 SkyScan query 06:29:00 SkyScan query done: ret=0 az=72.285<-4819 ze=136.02<-2932 Statuses=0009 0009 06:29:00 Msec=750 True Az=72.285 Ze=136.02 Az status=0009 Ze status=0009 06:29:00 Check angles 06:29:00 SkyScan query 06:29:00 SkyScan query done: ret=0 az=54.585<-3639 ze=114.645<-4357 Statuses=0009 0009 06:29:00 Msec=1500 True Az=54.585 Ze=114.645 Az status=0009 Ze status=0009 06:29:00 Check angles 06:29:00 SkyScan query 06:29:01 SkyScan query done: ret=0 az=40.89<-2726 ze=93.675<-5755 Statuses=0009 0009 06:29:01 Msec=2250 True Az=40.89 Ze=93.675 Az status=0009 Ze status=0009 06:29:01 Check angles [UTC 2018-12-4 06:29:01] 06:29:01 SkyScan query 06:29:02 SkyScan query done: ret=0 az=40.995<-2733 ze=70.98<-7268 Statuses=0008 0009 06:29:02 Msec=3000 True Az=40.995 Ze=70.98 Az status=0008 Ze status=0009 06:29:02 Check angles 06:29:02 SkyScan query 06:29:03 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 06:29:03 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 06:29:03 Check angles 06:29:03 SkyScan query 06:29:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:29:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:29:03 Message to Master queued w/err=0: serial=3467 error=0 06:29:08 Received message from Master: op=Filter serial=3468 06:29:08 Color wheel filter change from 0 to 0 06:29:08 FLIGetFilterPos err=0 currentPosition=0 06:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:08 Filter is already there-color wheel unchanged 06:29:08 Received message from Master: op=Shutter serial=3469 06:29:08 Shutter LASER close 06:29:09 Received message from Camera: op=State serial=3471 06:29:09 GetSingleValue result=40 Value=cccccccc 06:29:09 SkyScan query 06:29:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:09 Parameters OK 06:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:09 Set A/D data flow result=40 06:29:09 Set A/D channel type result=40 06:29:09 Set A/D encoding result=40 06:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:09 Set channel filter=0.000000e+000 result=40 06:29:09 Config A/D Result=40 06:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:09 Get A/D filter: -9.255963e+061 result=40 06:29:09 Get A/D value=-858993460 result=40 06:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:09 Parameters OK 06:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:09 Set A/D data flow result=40 06:29:09 Set A/D channel type result=40 06:29:09 Set A/D encoding result=40 06:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:09 Set channel filter=0.000000e+000 result=40 06:29:09 Config A/D Result=40 06:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:09 Get A/D filter: -9.255963e+061 result=40 06:29:09 Get A/D value=-858993460 result=40 06:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:09 Aux= 06:29:09 Message to Camera, serial 3471 queued 06:29:40 Received message from Master: op=PointingHead serial=3478 06:29:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:29:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:29:40 Point started: ret=0 06:29:40 point_skyscan result=0 06:29:41 Check angles 06:29:41 SkyScan query 06:29:42 SkyScan query done: ret=0 az=63.675<-4245 ze=66.555<-7563 Statuses=0009 0008 06:29:42 Msec=0 True Az=63.675 Ze=66.555 Az status=0009 Ze status=0008 06:29:42 Check angles 06:29:42 SkyScan query 06:29:42 SkyScan query done: ret=0 az=81.165<-5411 ze=66.495<-7567 Statuses=0009 0008 06:29:42 Msec=750 True Az=81.165 Ze=66.495 Az status=0009 Ze status=0008 06:29:43 Check angles 06:29:43 SkyScan query 06:29:43 SkyScan query done: ret=0 az=98.79<-6586 ze=66.495<-7567 Statuses=0009 0008 06:29:43 Msec=1500 True Az=98.79 Ze=66.495 Az status=0009 Ze status=0008 06:29:43 Check angles 06:29:43 SkyScan query 06:29:44 SkyScan query done: ret=0 az=116.19<-7746 ze=66.495<-7567 Statuses=0009 0008 06:29:44 Msec=2250 True Az=116.19 Ze=66.495 Az status=0009 Ze status=0008 06:29:44 Check angles 06:29:44 SkyScan query 06:29:45 SkyScan query done: ret=0 az=133.5<-8900 ze=66.495<-7567 Statuses=0009 0008 06:29:45 Msec=3000 True Az=133.5 Ze=66.495 Az status=0009 Ze status=0008 06:29:45 Check angles 06:29:45 SkyScan query 06:29:45 SkyScan query done: ret=0 az=150.99<-10066 ze=66.495<-7567 Statuses=0009 0008 06:29:45 Msec=3750 True Az=150.99 Ze=66.495 Az status=0009 Ze status=0008 06:29:46 Check angles 06:29:46 SkyScan query 06:29:46 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:29:46 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:29:46 Message to Master queued w/err=0: serial=3478 error=0 06:29:51 Received message from Master: op=Filter serial=3479 06:29:51 Color wheel filter change from 0 to 0 06:29:51 FLIGetFilterPos err=0 currentPosition=0 06:29:51 FLIGetStepsRemaining err=0 RemainingSteps=0 06:29:51 Filter is already there-color wheel unchanged 06:29:51 Received message from Master: op=Shutter serial=3480 06:29:51 Shutter LASER close 06:29:51 Received message from Camera: op=State serial=3482 06:29:51 GetSingleValue result=40 Value=cccccccc 06:29:51 SkyScan query 06:29:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:29:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:52 Parameters OK 06:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:52 Set A/D data flow result=40 06:29:52 Set A/D channel type result=40 06:29:52 Set A/D encoding result=40 06:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:52 Set channel filter=0.000000e+000 result=40 06:29:52 Config A/D Result=40 06:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:52 Get A/D filter: -9.255963e+061 result=40 06:29:52 Get A/D value=-858993460 result=40 06:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:29:52 Parameters OK 06:29:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:29:52 Set A/D data flow result=40 06:29:52 Set A/D channel type result=40 06:29:52 Set A/D encoding result=40 06:29:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:29:52 Set channel filter=0.000000e+000 result=40 06:29:52 Config A/D Result=40 06:29:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:29:52 Get A/D filter: -9.255963e+061 result=40 06:29:52 Get A/D value=-858993460 result=40 06:29:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:29:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:29:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:29:52 Aux= 06:29:52 Message to Camera, serial 3482 queued 06:30:23 Received message from Master: op=PointingHead serial=3489 06:30:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:30:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:30:23 Point started: ret=0 06:30:23 point_skyscan result=0 06:30:24 Check angles 06:30:24 SkyScan query 06:30:24 SkyScan query done: ret=0 az=135.03<-9002 ze=36.78<-9548 Statuses=0009 0009 06:30:24 Msec=0 True Az=135.03 Ze=36.78 Az status=0009 Ze status=0009 06:30:25 Check angles 06:30:25 SkyScan query 06:30:25 SkyScan query done: ret=0 az=117.54<-7836 ze=15.825<-10945 Statuses=0009 0009 06:30:25 Msec=750 True Az=117.54 Ze=15.825 Az status=0009 Ze status=0009 06:30:25 Check angles 06:30:25 SkyScan query 06:30:26 SkyScan query done: ret=0 az=100.14<-6676 ze=-5.145<-12343 Statuses=0009 0009 06:30:26 Msec=1500 True Az=100.14 Ze=-5.145 Az status=0009 Ze status=0009 06:30:26 Check angles 06:30:26 SkyScan query 06:30:27 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.535<-13769 Statuses=0009 0009 06:30:27 Msec=2250 True Az=82.26 Ze=-26.535 Az status=0009 Ze status=0009 06:30:27 Check angles 06:30:27 SkyScan query 06:30:28 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.565<-14571 Statuses=0009 0008 06:30:28 Msec=3000 True Az=64.755 Ze=-38.565 Az status=0009 Ze status=0008 06:30:28 Check angles 06:30:28 SkyScan query 06:30:28 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.535<-14569 Statuses=0009 0008 06:30:28 Msec=3750 True Az=46.995 Ze=-38.535 Az status=0009 Ze status=0008 06:30:28 Check angles 06:30:28 SkyScan query 06:30:29 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 06:30:29 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 06:30:29 Message to Master queued w/err=0: serial=3489 error=0 06:30:34 Received message from Master: op=Filter serial=3490 06:30:34 Color wheel filter change from 0 to 0 06:30:34 FLIGetFilterPos err=0 currentPosition=0 06:30:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:30:34 Filter is already there-color wheel unchanged 06:30:34 Received message from Master: op=Shutter serial=3491 06:30:34 Shutter LASER close 06:30:34 Received message from Camera: op=State serial=3493 06:30:34 GetSingleValue result=40 Value=cccccccc 06:30:34 SkyScan query 06:30:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:30:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:35 Parameters OK 06:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:35 Set A/D data flow result=40 06:30:35 Set A/D channel type result=40 06:30:35 Set A/D encoding result=40 06:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:35 Set channel filter=0.000000e+000 result=40 06:30:35 Config A/D Result=40 06:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:35 Get A/D filter: -9.255963e+061 result=40 06:30:35 Get A/D value=-858993460 result=40 06:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:30:35 Parameters OK 06:30:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:30:35 Set A/D data flow result=40 06:30:35 Set A/D channel type result=40 06:30:35 Set A/D encoding result=40 06:30:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:30:35 Set channel filter=0.000000e+000 result=40 06:30:35 Config A/D Result=40 06:30:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:30:35 Get A/D filter: -9.255963e+061 result=40 06:30:35 Get A/D value=-858993460 result=40 06:30:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:30:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:30:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:30:35 Aux= 06:30:35 Message to Camera, serial 3493 queued 06:31:06 Received message from Master: op=PointingHead serial=3500 06:31:06 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:31:06 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:31:06 Point started: ret=0 06:31:06 point_skyscan result=0 06:31:07 Check angles 06:31:07 SkyScan query 06:31:07 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.355<-16557 Statuses=0009 0009 06:31:07 Msec=0 True Az=63.915 Ze=-68.355 Az status=0009 Ze status=0009 06:31:08 Check angles 06:31:08 SkyScan query 06:31:08 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.745<-17983 Statuses=0009 0009 06:31:08 Msec=750 True Az=81.975 Ze=-89.745 Az status=0009 Ze status=0009 06:31:08 Check angles 06:31:08 SkyScan query 06:31:09 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.105<-19407 Statuses=0009 0009 06:31:09 Msec=1500 True Az=99.72 Ze=-111.105 Az status=0009 Ze status=0009 06:31:09 Check angles 06:31:09 SkyScan query 06:31:10 SkyScan query done: ret=0 az=117.165<-7811 ze=-132.075<-20805 Statuses=0009 0009 06:31:10 Msec=2250 True Az=117.165 Ze=-132.075 Az status=0009 Ze status=0009 06:31:10 Check angles 06:31:10 SkyScan query 06:31:10 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 06:31:10 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 06:31:11 Check angles 06:31:11 SkyScan query 06:31:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:31:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:31:11 Message to Master queued w/err=0: serial=3500 error=0 06:31:16 Received message from Master: op=Filter serial=3501 06:31:16 Color wheel filter change from 0 to 0 06:31:16 FLIGetFilterPos err=0 currentPosition=0 06:31:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:16 Filter is already there-color wheel unchanged 06:31:16 Received message from Master: op=Shutter serial=3502 06:31:16 Shutter LASER close 06:31:16 Received message from Camera: op=State serial=3504 06:31:16 GetSingleValue result=40 Value=cccccccc 06:31:16 SkyScan query 06:31:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:31:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:17 Parameters OK 06:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:17 Set A/D data flow result=40 06:31:17 Set A/D channel type result=40 06:31:17 Set A/D encoding result=40 06:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:17 Set channel filter=0.000000e+000 result=40 06:31:17 Config A/D Result=40 06:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:17 Get A/D filter: -9.255963e+061 result=40 06:31:17 Get A/D value=-858993460 result=40 06:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:17 Parameters OK 06:31:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:17 Set A/D data flow result=40 06:31:17 Set A/D channel type result=40 06:31:17 Set A/D encoding result=40 06:31:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:17 Set channel filter=0.000000e+000 result=40 06:31:17 Config A/D Result=40 06:31:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:17 Get A/D filter: -9.255963e+061 result=40 06:31:17 Get A/D value=-858993460 result=40 06:31:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:17 Aux= 06:31:17 Message to Camera, serial 3504 queued 06:31:48 Received message from Master: op=PointingHead serial=3511 06:31:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:31:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:31:48 Point started: ret=0 06:31:48 point_skyscan result=0 06:31:49 Check angles 06:31:49 SkyScan query 06:31:50 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.865<-23391 Statuses=0009 0009 06:31:50 Msec=0 True Az=113.025 Ze=-170.865 Az status=0009 Ze status=0009 06:31:50 Check angles 06:31:50 SkyScan query 06:31:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:31:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:31:50 Message to Master queued w/err=0: serial=3511 error=0 06:31:55 Received message from Master: op=Filter serial=3512 06:31:55 Color wheel filter change from 0 to 0 06:31:55 FLIGetFilterPos err=0 currentPosition=0 06:31:55 FLIGetStepsRemaining err=0 RemainingSteps=0 06:31:55 Filter is already there-color wheel unchanged 06:31:55 Received message from Master: op=Shutter serial=3513 06:31:55 Shutter LASER open 06:31:56 Received message from Camera: op=State serial=3515 06:31:56 GetSingleValue result=40 Value=cccccccc 06:31:56 SkyScan query 06:31:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:31:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:56 Parameters OK 06:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:56 Set A/D data flow result=40 06:31:56 Set A/D channel type result=40 06:31:56 Set A/D encoding result=40 06:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:56 Set channel filter=0.000000e+000 result=40 06:31:56 Config A/D Result=40 06:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:56 Get A/D filter: -9.255963e+061 result=40 06:31:56 Get A/D value=-858993460 result=40 06:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:31:56 Parameters OK 06:31:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:31:56 Set A/D data flow result=40 06:31:56 Set A/D channel type result=40 06:31:56 Set A/D encoding result=40 06:31:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:31:56 Set channel filter=0.000000e+000 result=40 06:31:56 Config A/D Result=40 06:31:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:31:56 Get A/D filter: -9.255963e+061 result=40 06:31:56 Get A/D value=-858993460 result=40 06:31:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:31:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:31:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:31:56 Aux= 06:31:56 Message to Camera, serial 3515 queued 06:31:59 Received message from Master: op=Shutter serial=3519 06:31:59 Shutter LASER close 06:31:59 Received message from Master: op=PointingHead serial=3523 06:31:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:31:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:32:00 Point started: ret=0 06:32:00 point_skyscan result=0 06:32:00 Check angles 06:32:00 SkyScan query 06:32:01 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.37<-21558 Statuses=0009 0009 06:32:01 Msec=0 True Az=135.765 Ze=-143.37 Az status=0009 Ze status=0009 06:32:01 Check angles 06:32:01 SkyScan query 06:32:02 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.415<-20161 Statuses=0009 0009 06:32:02 Msec=750 True Az=153.36 Ze=-122.415 Az status=0009 Ze status=0009 06:32:02 Check angles 06:32:02 SkyScan query 06:32:02 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.04<-18736 Statuses=0009 0009 06:32:02 Msec=1500 True Az=171.18 Ze=-101.04 Az status=0009 Ze status=0009 06:32:03 Check angles 06:32:03 SkyScan query 06:32:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.085<-17339 Statuses=0008 0009 06:32:03 Msec=2250 True Az=176.01 Ze=-80.085 Az status=0008 Ze status=0009 06:32:03 Check angles 06:32:03 SkyScan query 06:32:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.68<-15912 Statuses=0008 0009 06:32:04 Msec=3000 True Az=175.995 Ze=-58.68 Az status=0008 Ze status=0009 06:32:04 Check angles 06:32:04 SkyScan query 06:32:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:32:05 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:32:05 Message to Master queued w/err=0: serial=3523 error=0 [UTC 2018-12-4 06:32:09] 06:32:10 Received message from Master: op=Filter serial=3524 06:32:10 Color wheel filter change from 0 to 0 06:32:10 FLIGetFilterPos err=0 currentPosition=0 06:32:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:10 Filter is already there-color wheel unchanged 06:32:10 Received message from Master: op=Shutter serial=3525 06:32:10 Shutter LASER close 06:32:10 Received message from Camera: op=State serial=3527 06:32:10 GetSingleValue result=40 Value=cccccccc 06:32:10 SkyScan query 06:32:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:32:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:11 Parameters OK 06:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:11 Set A/D data flow result=40 06:32:11 Set A/D channel type result=40 06:32:11 Set A/D encoding result=40 06:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:11 Set channel filter=0.000000e+000 result=40 06:32:11 Config A/D Result=40 06:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:11 Get A/D filter: -9.255963e+061 result=40 06:32:11 Get A/D value=-858993460 result=40 06:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:11 Parameters OK 06:32:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:11 Set A/D data flow result=40 06:32:11 Set A/D channel type result=40 06:32:11 Set A/D encoding result=40 06:32:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:11 Set channel filter=0.000000e+000 result=40 06:32:11 Config A/D Result=40 06:32:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:11 Get A/D filter: -9.255963e+061 result=40 06:32:11 Get A/D value=-858993460 result=40 06:32:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:11 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:11 Aux= 06:32:11 Message to Camera, serial 3527 queued 06:32:41 Received message from Master: op=PointingHead serial=3534 06:32:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:32:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:32:42 Point started: ret=0 06:32:42 point_skyscan result=0 06:32:43 Check angles 06:32:43 SkyScan query 06:32:43 SkyScan query done: ret=0 az=153.24<-10216 ze=-22.02<-13468 Statuses=0009 0009 06:32:43 Msec=0 True Az=153.24 Ze=-22.02 Az status=0009 Ze status=0009 06:32:43 Check angles 06:32:43 SkyScan query 06:32:44 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.63<-12042 Statuses=0009 0009 06:32:44 Msec=750 True Az=135.42 Ze=-0.63 Az status=0009 Ze status=0009 06:32:44 Check angles 06:32:44 SkyScan query 06:32:45 SkyScan query done: ret=0 az=117.78<-7852 ze=20.325<-10645 Statuses=0009 0009 06:32:45 Msec=1500 True Az=117.78 Ze=20.325 Az status=0009 Ze status=0009 06:32:45 Check angles 06:32:45 SkyScan query 06:32:45 SkyScan query done: ret=0 az=100.485<-6699 ze=41.265<-9249 Statuses=0009 0009 06:32:45 Msec=2250 True Az=100.485 Ze=41.265 Az status=0009 Ze status=0009 06:32:46 Check angles 06:32:46 SkyScan query 06:32:46 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:32:46 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:32:46 Check angles 06:32:46 SkyScan query 06:32:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:32:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:32:47 Message to Master queued w/err=0: serial=3534 error=0 06:32:52 Received message from Master: op=Filter serial=3535 06:32:52 Color wheel filter change from 0 to 0 06:32:52 FLIGetFilterPos err=0 currentPosition=0 06:32:52 FLIGetStepsRemaining err=0 RemainingSteps=0 06:32:52 Filter is already there-color wheel unchanged 06:32:52 Received message from Master: op=Shutter serial=3536 06:32:52 Shutter LASER close 06:32:52 Received message from Camera: op=State serial=3538 06:32:52 GetSingleValue result=40 Value=cccccccc 06:32:52 SkyScan query 06:32:53 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:32:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:53 Parameters OK 06:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:53 Set A/D data flow result=40 06:32:53 Set A/D channel type result=40 06:32:53 Set A/D encoding result=40 06:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:53 Set channel filter=0.000000e+000 result=40 06:32:53 Config A/D Result=40 06:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:53 Get A/D filter: -9.255963e+061 result=40 06:32:53 Get A/D value=-858993460 result=40 06:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:32:53 Parameters OK 06:32:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:32:53 Set A/D data flow result=40 06:32:53 Set A/D channel type result=40 06:32:53 Set A/D encoding result=40 06:32:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:32:53 Set channel filter=0.000000e+000 result=40 06:32:53 Config A/D Result=40 06:32:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:32:53 Get A/D filter: -9.255963e+061 result=40 06:32:53 Get A/D value=-858993460 result=40 06:32:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:32:53 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:32:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:32:53 Aux= 06:32:53 Message to Camera, serial 3538 queued 06:33:24 Received message from Master: op=PointingHead serial=3545 06:33:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:33:24 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:33:24 Point started: ret=0 06:33:24 point_skyscan result=0 06:33:25 Check angles 06:33:25 SkyScan query 06:33:25 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 06:33:25 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 06:33:25 Check angles 06:33:25 SkyScan query 06:33:26 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 06:33:26 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 06:33:26 Check angles 06:33:26 SkyScan query 06:33:27 SkyScan query done: ret=0 az=144.675<-9645 ze=38.505<-9433 Statuses=0009 0008 06:33:27 Msec=1500 True Az=144.675 Ze=38.505 Az status=0009 Ze status=0008 06:33:27 Check angles 06:33:27 SkyScan query 06:33:28 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 06:33:28 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 06:33:28 Check angles 06:33:28 SkyScan query 06:33:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:33:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:33:28 Check angles 06:33:28 SkyScan query 06:33:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:33:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:33:29 Message to Master queued w/err=0: serial=3545 error=0 06:33:34 Received message from Master: op=Filter serial=3546 06:33:34 Color wheel filter change from 0 to 0 06:33:34 FLIGetFilterPos err=0 currentPosition=0 06:33:34 FLIGetStepsRemaining err=0 RemainingSteps=0 06:33:34 Filter is already there-color wheel unchanged 06:33:34 Received message from Master: op=Shutter serial=3547 06:33:34 Shutter LASER close 06:33:34 Received message from Camera: op=State serial=3549 06:33:34 GetSingleValue result=40 Value=cccccccc 06:33:34 SkyScan query 06:33:35 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:33:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:35 Parameters OK 06:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:35 Set A/D data flow result=40 06:33:35 Set A/D channel type result=40 06:33:35 Set A/D encoding result=40 06:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:35 Set channel filter=0.000000e+000 result=40 06:33:35 Config A/D Result=40 06:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:35 Get A/D filter: -9.255963e+061 result=40 06:33:35 Get A/D value=-858993460 result=40 06:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:33:35 Parameters OK 06:33:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:33:35 Set A/D data flow result=40 06:33:35 Set A/D channel type result=40 06:33:35 Set A/D encoding result=40 06:33:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:33:35 Set channel filter=0.000000e+000 result=40 06:33:35 Config A/D Result=40 06:33:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:33:35 Get A/D filter: -9.255963e+061 result=40 06:33:35 Get A/D value=-858993460 result=40 06:33:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:33:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:33:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:33:35 Aux= 06:33:35 Message to Camera, serial 3549 queued 06:34:06 Received message from Master: op=PointingHead serial=3556 06:34:06 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:34:06 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:34:06 Point started: ret=0 06:34:06 point_skyscan result=0 06:34:07 Check angles 06:34:07 SkyScan query 06:34:07 SkyScan query done: ret=0 az=152.79<-10186 ze=8.415<-11439 Statuses=0009 0009 06:34:07 Msec=0 True Az=152.79 Ze=8.415 Az status=0009 Ze status=0009 06:34:08 Check angles 06:34:08 SkyScan query 06:34:08 SkyScan query done: ret=0 az=134.925<-8995 ze=-12.99<-12866 Statuses=0009 0009 06:34:08 Msec=750 True Az=134.925 Ze=-12.99 Az status=0009 Ze status=0009 06:34:08 Check angles 06:34:08 SkyScan query 06:34:09 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.915<-14261 Statuses=0009 0009 06:34:09 Msec=1500 True Az=117.39 Ze=-33.915 Az status=0009 Ze status=0009 06:34:09 Check angles 06:34:09 SkyScan query 06:34:10 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.555<-15437 Statuses=0009 0009 06:34:10 Msec=2250 True Az=100.005 Ze=-51.555 Az status=0009 Ze status=0009 06:34:10 Check angles 06:34:10 SkyScan query 06:34:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 06:34:10 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 06:34:11 Check angles 06:34:11 SkyScan query 06:34:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:34:11 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:34:11 Message to Master queued w/err=0: serial=3556 error=0 06:34:16 Received message from Master: op=Filter serial=3557 06:34:16 Color wheel filter change from 0 to 0 06:34:16 FLIGetFilterPos err=0 currentPosition=0 06:34:16 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:16 Filter is already there-color wheel unchanged 06:34:16 Received message from Master: op=Shutter serial=3558 06:34:16 Shutter LASER close 06:34:16 Received message from Camera: op=State serial=3560 06:34:16 GetSingleValue result=40 Value=cccccccc 06:34:16 SkyScan query 06:34:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:34:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:17 Parameters OK 06:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:17 Set A/D data flow result=40 06:34:17 Set A/D channel type result=40 06:34:17 Set A/D encoding result=40 06:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:17 Set channel filter=0.000000e+000 result=40 06:34:17 Config A/D Result=40 06:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:17 Get A/D filter: -9.255963e+061 result=40 06:34:17 Get A/D value=-858993460 result=40 06:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:17 Parameters OK 06:34:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:17 Set A/D data flow result=40 06:34:17 Set A/D channel type result=40 06:34:17 Set A/D encoding result=40 06:34:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:17 Set channel filter=0.000000e+000 result=40 06:34:17 Config A/D Result=40 06:34:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:17 Get A/D filter: -9.255963e+061 result=40 06:34:17 Get A/D value=-858993460 result=40 06:34:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:17 Aux= 06:34:17 Message to Camera, serial 3560 queued 06:34:48 Received message from Master: op=PointingHead serial=3567 06:34:48 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:34:48 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:34:48 Point started: ret=0 06:34:48 point_skyscan result=0 06:34:49 Check angles 06:34:49 SkyScan query 06:34:49 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.045<-17403 Statuses=0009 0009 06:34:49 Msec=0 True Az=108.825 Ze=-81.045 Az status=0009 Ze status=0009 06:34:50 Check angles 06:34:50 SkyScan query 06:34:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.435<-18829 Statuses=0008 0009 06:34:50 Msec=750 True Az=113.01 Ze=-102.435 Az status=0008 Ze status=0009 06:34:50 Check angles 06:34:50 SkyScan query 06:34:51 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.39<-20226 Statuses=0008 0009 06:34:51 Msec=1500 True Az=113.01 Ze=-123.39 Az status=0008 Ze status=0009 06:34:51 Check angles 06:34:51 SkyScan query 06:34:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 06:34:52 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 06:34:52 Check angles 06:34:52 SkyScan query 06:34:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.735<-23049 Statuses=0008 0009 06:34:52 Msec=3000 True Az=112.995 Ze=-165.735 Az status=0008 Ze status=0009 06:34:53 Check angles 06:34:53 SkyScan query 06:34:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:34:53 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:34:53 Message to Master queued w/err=0: serial=3567 error=0 06:34:58 Received message from Master: op=Filter serial=3568 06:34:58 Color wheel filter change from 0 to 0 06:34:58 FLIGetFilterPos err=0 currentPosition=0 06:34:58 FLIGetStepsRemaining err=0 RemainingSteps=0 06:34:58 Filter is already there-color wheel unchanged 06:34:58 Received message from Master: op=Shutter serial=3569 06:34:58 Shutter LASER open 06:34:59 Received message from Camera: op=State serial=3571 06:34:59 GetSingleValue result=40 Value=cccccccc 06:34:59 SkyScan query 06:34:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:34:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:59 Parameters OK 06:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:59 Set A/D data flow result=40 06:34:59 Set A/D channel type result=40 06:34:59 Set A/D encoding result=40 06:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:59 Set channel filter=0.000000e+000 result=40 06:34:59 Config A/D Result=40 06:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:59 Get A/D filter: -9.255963e+061 result=40 06:34:59 Get A/D value=-858993460 result=40 06:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:34:59 Parameters OK 06:34:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:34:59 Set A/D data flow result=40 06:34:59 Set A/D channel type result=40 06:34:59 Set A/D encoding result=40 06:34:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:34:59 Set channel filter=0.000000e+000 result=40 06:34:59 Config A/D Result=40 06:34:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:34:59 Get A/D filter: -9.255963e+061 result=40 06:34:59 Get A/D value=-858993460 result=40 06:34:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:34:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:34:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:34:59 Aux= 06:34:59 Message to Camera, serial 3571 queued 06:35:02 Received message from Master: op=Shutter serial=3575 06:35:02 Shutter LASER close 06:35:02 Received message from Master: op=PointingHead serial=3579 06:35:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:35:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:35:02 Point started: ret=0 06:35:02 point_skyscan result=0 06:35:03 Check angles 06:35:03 SkyScan query 06:35:04 SkyScan query done: ret=0 az=89.625<-5975 ze=156.87<-1542 Statuses=0009 0009 06:35:04 Msec=0 True Az=89.625 Ze=156.87 Az status=0009 Ze status=0009 06:35:04 Check angles 06:35:04 SkyScan query 06:35:04 SkyScan query done: ret=0 az=72.135<-4809 ze=135.9<-2940 Statuses=0009 0009 06:35:04 Msec=750 True Az=72.135 Ze=135.9 Az status=0009 Ze status=0009 06:35:05 Check angles 06:35:05 SkyScan query 06:35:05 SkyScan query done: ret=0 az=54.75<-3650 ze=114.945<-4337 Statuses=0009 0009 06:35:05 Msec=1500 True Az=54.75 Ze=114.945 Az status=0009 Ze status=0009 06:35:05 Check angles 06:35:05 SkyScan query 06:35:06 SkyScan query done: ret=0 az=40.86<-2724 ze=93.99<-5734 Statuses=0009 0009 06:35:06 Msec=2250 True Az=40.86 Ze=93.99 Az status=0009 Ze status=0009 06:35:06 Check angles 06:35:06 SkyScan query 06:35:07 SkyScan query done: ret=0 az=40.995<-2733 ze=73.035<-7131 Statuses=0008 0009 06:35:07 Msec=3000 True Az=40.995 Ze=73.035 Az status=0008 Ze status=0009 06:35:07 Check angles 06:35:07 SkyScan query 06:35:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.335<-8511 Statuses=0008 0009 06:35:07 Msec=3750 True Az=40.995 Ze=52.335 Az status=0008 Ze status=0009 06:35:08 Check angles 06:35:08 SkyScan query 06:35:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:35:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:35:08 Message to Master queued w/err=0: serial=3579 error=0 06:35:13 Received message from Master: op=Filter serial=3580 06:35:13 Color wheel filter change from 0 to 0 06:35:13 FLIGetFilterPos err=0 currentPosition=0 06:35:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:13 Filter is already there-color wheel unchanged 06:35:13 Received message from Master: op=Shutter serial=3581 06:35:13 Shutter LASER close 06:35:14 Received message from Camera: op=State serial=3583 06:35:14 GetSingleValue result=40 Value=cccccccc 06:35:14 SkyScan query 06:35:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:35:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:14 Parameters OK 06:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:14 Set A/D data flow result=40 06:35:14 Set A/D channel type result=40 06:35:14 Set A/D encoding result=40 06:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:14 Set channel filter=0.000000e+000 result=40 06:35:14 Config A/D Result=40 06:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:14 Get A/D filter: -9.255963e+061 result=40 06:35:14 Get A/D value=-858993460 result=40 06:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:14 Parameters OK 06:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:14 Set A/D data flow result=40 06:35:14 Set A/D channel type result=40 06:35:14 Set A/D encoding result=40 06:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:14 Set channel filter=0.000000e+000 result=40 06:35:14 Config A/D Result=40 06:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:14 Get A/D filter: -9.255963e+061 result=40 06:35:14 Get A/D value=-858993460 result=40 06:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:14 Aux= 06:35:14 Message to Camera, serial 3583 queued 06:35:45 Received message from Master: op=PointingHead serial=3590 06:35:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:35:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:35:45 Point started: ret=0 06:35:45 point_skyscan result=0 06:35:46 Check angles 06:35:46 SkyScan query 06:35:47 SkyScan query done: ret=0 az=64.215<-4281 ze=66.54<-7564 Statuses=0009 0008 06:35:47 Msec=0 True Az=64.215 Ze=66.54 Az status=0009 Ze status=0008 06:35:47 Check angles 06:35:47 SkyScan query 06:35:47 SkyScan query done: ret=0 az=81.825<-5455 ze=66.51<-7566 Statuses=0009 0008 06:35:47 Msec=750 True Az=81.825 Ze=66.51 Az status=0009 Ze status=0008 06:35:48 Check angles 06:35:48 SkyScan query 06:35:48 SkyScan query done: ret=0 az=99.255<-6617 ze=66.495<-7567 Statuses=0009 0008 06:35:48 Msec=1500 True Az=99.255 Ze=66.495 Az status=0009 Ze status=0008 06:35:48 Check angles 06:35:48 SkyScan query 06:35:49 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 06:35:49 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 06:35:49 Check angles 06:35:49 SkyScan query 06:35:50 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 06:35:50 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 06:35:50 Check angles 06:35:50 SkyScan query 06:35:50 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 06:35:50 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 06:35:51 Check angles 06:35:51 SkyScan query 06:35:51 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:35:51 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:35:51 Message to Master queued w/err=0: serial=3590 error=0 06:35:56 Received message from Master: op=Filter serial=3591 06:35:56 Color wheel filter change from 0 to 0 06:35:56 FLIGetFilterPos err=0 currentPosition=0 06:35:56 FLIGetStepsRemaining err=0 RemainingSteps=0 06:35:56 Filter is already there-color wheel unchanged 06:35:56 Received message from Master: op=Shutter serial=3592 06:35:56 Shutter LASER close 06:35:56 Received message from Camera: op=State serial=3594 06:35:56 GetSingleValue result=40 Value=cccccccc 06:35:56 SkyScan query 06:35:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:35:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:57 Parameters OK 06:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:57 Set A/D data flow result=40 06:35:57 Set A/D channel type result=40 06:35:57 Set A/D encoding result=40 06:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:57 Set channel filter=0.000000e+000 result=40 06:35:57 Config A/D Result=40 06:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:57 Get A/D filter: -9.255963e+061 result=40 06:35:57 Get A/D value=-858993460 result=40 06:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:35:57 Parameters OK 06:35:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:35:57 Set A/D data flow result=40 06:35:57 Set A/D channel type result=40 06:35:57 Set A/D encoding result=40 06:35:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:35:57 Set channel filter=0.000000e+000 result=40 06:35:57 Config A/D Result=40 06:35:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:35:57 Get A/D filter: -9.255963e+061 result=40 06:35:57 Get A/D value=-858993460 result=40 06:35:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:35:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:35:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:35:57 Aux= 06:35:57 Message to Camera, serial 3594 queued 06:36:28 Received message from Master: op=PointingHead serial=3601 06:36:28 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:36:28 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:36:28 Point started: ret=0 06:36:28 point_skyscan result=0 06:36:29 Check angles 06:36:29 SkyScan query 06:36:30 SkyScan query done: ret=0 az=134.745<-8983 ze=36.405<-9573 Statuses=0009 0009 06:36:30 Msec=0 True Az=134.745 Ze=36.405 Az status=0009 Ze status=0009 06:36:30 Check angles 06:36:30 SkyScan query 06:36:30 SkyScan query done: ret=0 az=117.24<-7816 ze=15.465<-10969 Statuses=0009 0009 06:36:30 Msec=750 True Az=117.24 Ze=15.465 Az status=0009 Ze status=0009 06:36:31 Check angles 06:36:31 SkyScan query 06:36:31 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.505<-12367 Statuses=0009 0009 06:36:31 Msec=1500 True Az=99.885 Ze=-5.505 Az status=0009 Ze status=0009 06:36:31 Check angles 06:36:31 SkyScan query 06:36:32 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.475<-13765 Statuses=0009 0009 06:36:32 Msec=2250 True Az=82.41 Ze=-26.475 Az status=0009 Ze status=0009 06:36:32 Check angles 06:36:32 SkyScan query 06:36:33 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.565<-14571 Statuses=0009 0008 06:36:33 Msec=3000 True Az=64.92 Ze=-38.565 Az status=0009 Ze status=0008 06:36:33 Check angles 06:36:33 SkyScan query 06:36:33 SkyScan query done: ret=0 az=47.49<-3166 ze=-38.535<-14569 Statuses=0009 0008 06:36:33 Msec=3750 True Az=47.49 Ze=-38.535 Az status=0009 Ze status=0008 06:36:34 Check angles 06:36:34 SkyScan query 06:36:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:36:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:36:34 Message to Master queued w/err=0: serial=3601 error=0 06:36:39 Received message from Master: op=Filter serial=3602 06:36:39 Color wheel filter change from 0 to 0 06:36:39 FLIGetFilterPos err=0 currentPosition=0 06:36:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:36:39 Filter is already there-color wheel unchanged 06:36:39 Received message from Master: op=Shutter serial=3603 06:36:39 Shutter LASER close 06:36:39 Received message from Camera: op=State serial=3605 06:36:39 GetSingleValue result=40 Value=cccccccc 06:36:39 SkyScan query 06:36:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:40 Parameters OK 06:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:40 Set A/D data flow result=40 06:36:40 Set A/D channel type result=40 06:36:40 Set A/D encoding result=40 06:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:40 Set channel filter=0.000000e+000 result=40 06:36:40 Config A/D Result=40 06:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:40 Get A/D filter: -9.255963e+061 result=40 06:36:40 Get A/D value=-858993460 result=40 06:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:36:40 Parameters OK 06:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:36:40 Set A/D data flow result=40 06:36:40 Set A/D channel type result=40 06:36:40 Set A/D encoding result=40 06:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:36:40 Set channel filter=0.000000e+000 result=40 06:36:40 Config A/D Result=40 06:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:36:40 Get A/D filter: -9.255963e+061 result=40 06:36:40 Get A/D value=-858993460 result=40 06:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:36:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:36:40 Aux= 06:36:40 Message to Camera, serial 3605 queued 06:37:11 Received message from Master: op=PointingHead serial=3612 06:37:11 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:37:11 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:37:11 Point started: ret=0 06:37:11 point_skyscan result=0 06:37:12 Check angles 06:37:12 SkyScan query 06:37:12 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.31<-16554 Statuses=0009 0009 06:37:12 Msec=0 True Az=63.915 Ze=-68.31 Az status=0009 Ze status=0009 06:37:13 Check angles 06:37:13 SkyScan query 06:37:13 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.31<-17954 Statuses=0009 0009 06:37:13 Msec=750 True Az=81.63 Ze=-89.31 Az status=0009 Ze status=0009 06:37:13 Check angles 06:37:13 SkyScan query 06:37:14 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.235<-19349 Statuses=0009 0009 06:37:14 Msec=1500 True Az=99.195 Ze=-110.235 Az status=0009 Ze status=0009 06:37:14 Check angles 06:37:14 SkyScan query 06:37:15 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.175<-20745 Statuses=0009 0009 06:37:15 Msec=2250 True Az=116.46 Ze=-131.175 Az status=0009 Ze status=0009 06:37:15 Check angles 06:37:15 SkyScan query 06:37:15 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 06:37:15 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 06:37:16 Check angles 06:37:16 SkyScan query 06:37:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:37:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:37:16 Message to Master queued w/err=0: serial=3612 error=0 06:37:21 Received message from Master: op=Filter serial=3613 06:37:21 Color wheel filter change from 0 to 0 06:37:21 FLIGetFilterPos err=0 currentPosition=0 06:37:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:37:21 Filter is already there-color wheel unchanged 06:37:21 Received message from Master: op=Shutter serial=3614 06:37:21 Shutter LASER close 06:37:21 Received message from Camera: op=State serial=3616 06:37:21 GetSingleValue result=40 Value=cccccccc 06:37:21 SkyScan query 06:37:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:22 Parameters OK 06:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:22 Set A/D data flow result=40 06:37:22 Set A/D channel type result=40 06:37:22 Set A/D encoding result=40 06:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:22 Set channel filter=0.000000e+000 result=40 06:37:22 Config A/D Result=40 06:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:22 Get A/D filter: -9.255963e+061 result=40 06:37:22 Get A/D value=-858993460 result=40 06:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:37:22 Parameters OK 06:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:37:22 Set A/D data flow result=40 06:37:22 Set A/D channel type result=40 06:37:22 Set A/D encoding result=40 06:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:37:22 Set channel filter=0.000000e+000 result=40 06:37:22 Config A/D Result=40 06:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:37:22 Get A/D filter: -9.255963e+061 result=40 06:37:22 Get A/D value=-858993460 result=40 06:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:37:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:37:22 Aux= 06:37:22 Message to Camera, serial 3616 queued 06:37:53 Received message from Master: op=PointingHead serial=3623 06:37:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:37:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:37:53 Point started: ret=0 06:37:53 point_skyscan result=0 06:37:54 Check angles 06:37:54 SkyScan query 06:37:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 06:37:54 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 06:37:55 Check angles 06:37:55 SkyScan query 06:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:37:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:37:55 Message to Master queued w/err=0: serial=3623 error=0 06:38:00 Received message from Master: op=Filter serial=3624 06:38:00 Color wheel filter change from 0 to 0 06:38:00 FLIGetFilterPos err=0 currentPosition=0 06:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:00 Filter is already there-color wheel unchanged 06:38:00 Received message from Master: op=Shutter serial=3625 06:38:00 Shutter LASER open 06:38:01 Received message from Camera: op=State serial=3627 06:38:01 GetSingleValue result=40 Value=cccccccc 06:38:01 SkyScan query 06:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:01 Parameters OK 06:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:01 Set A/D data flow result=40 06:38:01 Set A/D channel type result=40 06:38:01 Set A/D encoding result=40 06:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:01 Set channel filter=0.000000e+000 result=40 06:38:01 Config A/D Result=40 06:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:01 Get A/D filter: -9.255963e+061 result=40 06:38:01 Get A/D value=-858993460 result=40 06:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:01 Parameters OK 06:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:01 Set A/D data flow result=40 06:38:01 Set A/D channel type result=40 06:38:01 Set A/D encoding result=40 06:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:01 Set channel filter=0.000000e+000 result=40 06:38:01 Config A/D Result=40 06:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:01 Get A/D filter: -9.255963e+061 result=40 06:38:01 Get A/D value=-858993460 result=40 06:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:01 Aux= 06:38:01 Message to Camera, serial 3627 queued 06:38:04 Received message from Master: op=Shutter serial=3631 06:38:04 Shutter LASER close 06:38:04 Received message from Master: op=PointingHead serial=3635 06:38:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:38:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:38:05 Point started: ret=0 06:38:05 point_skyscan result=0 06:38:05 Check angles 06:38:05 SkyScan query 06:38:06 SkyScan query done: ret=0 az=136.23<-9082 ze=-142.815<-21521 Statuses=0009 0009 06:38:06 Msec=0 True Az=136.23 Ze=-142.815 Az status=0009 Ze status=0009 06:38:06 Check angles 06:38:06 SkyScan query 06:38:07 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.86<-20124 Statuses=0009 0009 06:38:07 Msec=750 True Az=153.765 Ze=-121.86 Az status=0009 Ze status=0009 06:38:07 Check angles 06:38:07 SkyScan query 06:38:07 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.47<-18698 Statuses=0009 0009 06:38:07 Msec=1500 True Az=171.66 Ze=-100.47 Az status=0009 Ze status=0009 06:38:08 Check angles 06:38:08 SkyScan query 06:38:08 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.5<-17300 Statuses=0008 0009 06:38:08 Msec=2250 True Az=176.025 Ze=-79.5 Az status=0008 Ze status=0009 06:38:08 Check angles 06:38:08 SkyScan query 06:38:09 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.53<-15902 Statuses=0008 0009 06:38:09 Msec=3000 True Az=176.01 Ze=-58.53 Az status=0008 Ze status=0009 06:38:09 Check angles 06:38:09 SkyScan query 06:38:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:38:10 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:38:10 Message to Master queued w/err=0: serial=3635 error=0 06:38:15 Received message from Master: op=Filter serial=3636 06:38:15 Color wheel filter change from 0 to 0 06:38:15 FLIGetFilterPos err=0 currentPosition=0 06:38:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:15 Filter is already there-color wheel unchanged 06:38:15 Received message from Master: op=Shutter serial=3637 06:38:15 Shutter LASER close 06:38:15 Received message from Camera: op=State serial=3639 06:38:15 GetSingleValue result=40 Value=cccccccc 06:38:15 SkyScan query 06:38:16 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:38:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:16 Parameters OK 06:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:16 Set A/D data flow result=40 06:38:16 Set A/D channel type result=40 06:38:16 Set A/D encoding result=40 06:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:16 Set channel filter=0.000000e+000 result=40 06:38:16 Config A/D Result=40 06:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:16 Get A/D filter: -9.255963e+061 result=40 06:38:16 Get A/D value=-858993460 result=40 06:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:16 Parameters OK 06:38:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:16 Set A/D data flow result=40 06:38:16 Set A/D channel type result=40 06:38:16 Set A/D encoding result=40 06:38:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:16 Set channel filter=0.000000e+000 result=40 06:38:16 Config A/D Result=40 06:38:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:16 Get A/D filter: -9.255963e+061 result=40 06:38:16 Get A/D value=-858993460 result=40 06:38:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:16 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:16 Aux= 06:38:16 Message to Camera, serial 3639 queued 06:38:46 Received message from Master: op=PointingHead serial=3646 06:38:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:38:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:38:47 Point started: ret=0 06:38:47 point_skyscan result=0 06:38:48 Check angles 06:38:48 SkyScan query 06:38:48 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.495<-13433 Statuses=0009 0009 06:38:48 Msec=0 True Az=152.745 Ze=-21.495 Az status=0009 Ze status=0009 06:38:48 Check angles 06:38:48 SkyScan query 06:38:49 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.525<-12035 Statuses=0009 0009 06:38:49 Msec=750 True Az=135.345 Ze=-0.525 Az status=0009 Ze status=0009 06:38:49 Check angles 06:38:49 SkyScan query 06:38:50 SkyScan query done: ret=0 az=117.795<-7853 ze=20.415<-10639 Statuses=0009 0009 06:38:50 Msec=1500 True Az=117.795 Ze=20.415 Az status=0009 Ze status=0009 06:38:50 Check angles 06:38:50 SkyScan query 06:38:50 SkyScan query done: ret=0 az=99.99<-6666 ze=41.805<-9213 Statuses=0009 0009 06:38:50 Msec=2250 True Az=99.99 Ze=41.805 Az status=0009 Ze status=0009 06:38:51 Check angles 06:38:51 SkyScan query 06:38:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 06:38:51 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 06:38:51 Check angles 06:38:51 SkyScan query 06:38:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:38:52 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:38:52 Message to Master queued w/err=0: serial=3646 error=0 06:38:57 Received message from Master: op=Filter serial=3647 06:38:57 Color wheel filter change from 0 to 0 06:38:57 FLIGetFilterPos err=0 currentPosition=0 06:38:57 FLIGetStepsRemaining err=0 RemainingSteps=0 06:38:57 Filter is already there-color wheel unchanged 06:38:57 Received message from Master: op=Shutter serial=3648 06:38:57 Shutter LASER close 06:38:57 Received message from Camera: op=State serial=3650 06:38:57 GetSingleValue result=40 Value=cccccccc 06:38:57 SkyScan query 06:38:58 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:38:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:58 Parameters OK 06:38:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:58 Set A/D data flow result=40 06:38:58 Set A/D channel type result=40 06:38:58 Set A/D encoding result=40 06:38:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:58 Set channel filter=0.000000e+000 result=40 06:38:58 Config A/D Result=40 06:38:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:58 Get A/D filter: -9.255963e+061 result=40 06:38:58 Get A/D value=-858993460 result=40 06:38:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:38:58 Parameters OK 06:38:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:38:58 Set A/D data flow result=40 06:38:58 Set A/D channel type result=40 06:38:58 Set A/D encoding result=40 06:38:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:38:58 Set channel filter=0.000000e+000 result=40 06:38:58 Config A/D Result=40 06:38:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:38:58 Get A/D filter: -9.255963e+061 result=40 06:38:58 Get A/D value=-858993460 result=40 06:38:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:38:58 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:38:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:38:58 Aux= 06:38:58 Message to Camera, serial 3650 queued 06:39:29 Received message from Master: op=PointingHead serial=3657 06:39:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:39:29 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:39:29 Point started: ret=0 06:39:29 point_skyscan result=0 06:39:30 Check angles 06:39:30 SkyScan query 06:39:30 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 06:39:30 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 06:39:30 Check angles 06:39:30 SkyScan query 06:39:31 SkyScan query done: ret=0 az=127.05<-8470 ze=38.505<-9433 Statuses=0009 0008 06:39:31 Msec=750 True Az=127.05 Ze=38.505 Az status=0009 Ze status=0008 06:39:31 Check angles 06:39:31 SkyScan query 06:39:32 SkyScan query done: ret=0 az=144.9<-9660 ze=38.505<-9433 Statuses=0009 0008 06:39:32 Msec=1500 True Az=144.9 Ze=38.505 Az status=0009 Ze status=0008 06:39:32 Check angles 06:39:32 SkyScan query 06:39:33 SkyScan query done: ret=0 az=162.405<-10827 ze=38.505<-9433 Statuses=0009 0008 06:39:33 Msec=2250 True Az=162.405 Ze=38.505 Az status=0009 Ze status=0008 06:39:33 Check angles 06:39:33 SkyScan query 06:39:33 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:39:33 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:39:33 Check angles 06:39:33 SkyScan query 06:39:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:39:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:39:34 Message to Master queued w/err=0: serial=3657 error=0 06:39:39 Received message from Master: op=Filter serial=3658 06:39:39 Color wheel filter change from 0 to 0 06:39:39 FLIGetFilterPos err=0 currentPosition=0 06:39:39 FLIGetStepsRemaining err=0 RemainingSteps=0 06:39:39 Filter is already there-color wheel unchanged 06:39:39 Received message from Master: op=Shutter serial=3659 06:39:39 Shutter LASER close 06:39:39 Received message from Camera: op=State serial=3661 06:39:39 GetSingleValue result=40 Value=cccccccc 06:39:39 SkyScan query 06:39:40 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:39:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:40 Parameters OK 06:39:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:40 Set A/D data flow result=40 06:39:40 Set A/D channel type result=40 06:39:40 Set A/D encoding result=40 06:39:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:40 Set channel filter=0.000000e+000 result=40 06:39:40 Config A/D Result=40 06:39:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:40 Get A/D filter: -9.255963e+061 result=40 06:39:40 Get A/D value=-858993460 result=40 06:39:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:39:40 Parameters OK 06:39:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:39:40 Set A/D data flow result=40 06:39:40 Set A/D channel type result=40 06:39:40 Set A/D encoding result=40 06:39:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:39:40 Set channel filter=0.000000e+000 result=40 06:39:40 Config A/D Result=40 06:39:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:39:40 Get A/D filter: -9.255963e+061 result=40 06:39:40 Get A/D value=-858993460 result=40 06:39:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:39:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:39:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:39:40 Aux= 06:39:40 Message to Camera, serial 3661 queued 06:40:11 Received message from Master: op=PointingHead serial=3668 06:40:11 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:40:11 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:40:11 Point started: ret=0 06:40:11 point_skyscan result=0 06:40:12 Check angles 06:40:12 SkyScan query 06:40:12 SkyScan query done: ret=0 az=152.685<-10179 ze=8.265<-11449 Statuses=0009 0009 06:40:12 Msec=0 True Az=152.685 Ze=8.265 Az status=0009 Ze status=0009 06:40:13 Check angles 06:40:13 SkyScan query 06:40:13 SkyScan query done: ret=0 az=135.255<-9017 ze=-12.69<-12846 Statuses=0009 0009 06:40:13 Msec=750 True Az=135.255 Ze=-12.69 Az status=0009 Ze status=0009 06:40:13 Check angles 06:40:13 SkyScan query 06:40:14 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.63<-14242 Statuses=0009 0009 06:40:14 Msec=1500 True Az=117.555 Ze=-33.63 Az status=0009 Ze status=0009 06:40:14 Check angles 06:40:14 SkyScan query 06:40:15 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.54<-15436 Statuses=0009 0009 06:40:15 Msec=2250 True Az=100.155 Ze=-51.54 Az status=0009 Ze status=0009 06:40:15 Check angles 06:40:15 SkyScan query 06:40:15 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:40:15 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:40:16 Check angles 06:40:16 SkyScan query 06:40:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:40:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:40:16 Message to Master queued w/err=0: serial=3668 error=0 06:40:21 Received message from Master: op=Filter serial=3669 06:40:21 Color wheel filter change from 0 to 0 06:40:21 FLIGetFilterPos err=0 currentPosition=0 06:40:21 FLIGetStepsRemaining err=0 RemainingSteps=0 06:40:21 Filter is already there-color wheel unchanged 06:40:21 Received message from Master: op=Shutter serial=3670 06:40:21 Shutter LASER close 06:40:21 Received message from Camera: op=State serial=3672 06:40:21 GetSingleValue result=40 Value=cccccccc 06:40:21 SkyScan query 06:40:22 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:40:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:22 Parameters OK 06:40:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:22 Set A/D data flow result=40 06:40:22 Set A/D channel type result=40 06:40:22 Set A/D encoding result=40 06:40:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:22 Set channel filter=0.000000e+000 result=40 06:40:22 Config A/D Result=40 06:40:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:22 Get A/D filter: -9.255963e+061 result=40 06:40:22 Get A/D value=-858993460 result=40 06:40:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:40:22 Parameters OK 06:40:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:40:22 Set A/D data flow result=40 06:40:22 Set A/D channel type result=40 06:40:22 Set A/D encoding result=40 06:40:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:40:22 Set channel filter=0.000000e+000 result=40 06:40:22 Config A/D Result=40 06:40:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:40:22 Get A/D filter: -9.255963e+061 result=40 06:40:22 Get A/D value=-858993460 result=40 06:40:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:40:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:40:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:40:22 Aux= 06:40:22 Message to Camera, serial 3672 queued 06:40:53 Received message from Master: op=PointingHead serial=3679 06:40:53 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:40:53 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:40:53 Point started: ret=0 06:40:53 point_skyscan result=0 06:40:54 Check angles 06:40:54 SkyScan query 06:40:54 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.12<-17408 Statuses=0009 0009 06:40:54 Msec=0 True Az=108.795 Ze=-81.12 Az status=0009 Ze status=0009 06:40:55 Check angles 06:40:55 SkyScan query 06:40:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.06<-18804 Statuses=0008 0009 06:40:55 Msec=750 True Az=113.01 Ze=-102.06 Az status=0008 Ze status=0009 06:40:55 Check angles 06:40:55 SkyScan query 06:40:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-123<-20200 Statuses=0008 0009 06:40:56 Msec=1500 True Az=113.01 Ze=-123 Az status=0008 Ze status=0009 06:40:56 Check angles 06:40:56 SkyScan query 06:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.495<-21633 Statuses=0008 0009 06:40:57 Msec=2250 True Az=112.995 Ze=-144.495 Az status=0008 Ze status=0009 06:40:57 Check angles 06:40:57 SkyScan query 06:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 06:40:58 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 06:40:58 Check angles 06:40:58 SkyScan query 06:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:40:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:40:58 Message to Master queued w/err=0: serial=3679 error=0 06:41:03 Received message from Master: op=Filter serial=3680 06:41:03 Color wheel filter change from 0 to 0 06:41:03 FLIGetFilterPos err=0 currentPosition=0 06:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:03 Filter is already there-color wheel unchanged [UTC 2018-12-4 06:41:03] 06:41:03 Received message from Master: op=Shutter serial=3681 06:41:04 Shutter LASER open 06:41:04 Received message from Camera: op=State serial=3683 06:41:04 GetSingleValue result=40 Value=cccccccc 06:41:04 SkyScan query 06:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:41:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:04 Parameters OK 06:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:04 Set A/D data flow result=40 06:41:04 Set A/D channel type result=40 06:41:04 Set A/D encoding result=40 06:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:04 Set channel filter=0.000000e+000 result=40 06:41:04 Config A/D Result=40 06:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:04 Get A/D filter: -9.255963e+061 result=40 06:41:04 Get A/D value=-858993460 result=40 06:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:04 Parameters OK 06:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:04 Set A/D data flow result=40 06:41:04 Set A/D channel type result=40 06:41:04 Set A/D encoding result=40 06:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:04 Set channel filter=0.000000e+000 result=40 06:41:04 Config A/D Result=40 06:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:04 Get A/D filter: -9.255963e+061 result=40 06:41:04 Get A/D value=-858993460 result=40 06:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:04 Aux= 06:41:04 Message to Camera, serial 3683 queued 06:41:07 Received message from Master: op=Shutter serial=3687 06:41:07 Shutter LASER close 06:41:07 Received message from Master: op=PointingHead serial=3691 06:41:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:41:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:41:07 Point started: ret=0 06:41:07 point_skyscan result=0 06:41:08 Check angles 06:41:08 SkyScan query 06:41:09 SkyScan query done: ret=0 az=89.835<-5989 ze=157.02<-1532 Statuses=0009 0009 06:41:09 Msec=0 True Az=89.835 Ze=157.02 Az status=0009 Ze status=0009 06:41:09 Check angles 06:41:09 SkyScan query 06:41:10 SkyScan query done: ret=0 az=72<-4800 ze=135.735<-2951 Statuses=0009 0009 06:41:10 Msec=750 True Az=72 Ze=135.735 Az status=0009 Ze status=0009 06:41:10 Check angles 06:41:10 SkyScan query 06:41:10 SkyScan query done: ret=0 az=54.63<-3642 ze=114.78<-4348 Statuses=0009 0009 06:41:10 Msec=1500 True Az=54.63 Ze=114.78 Az status=0009 Ze status=0009 06:41:10 Check angles 06:41:10 SkyScan query 06:41:11 SkyScan query done: ret=0 az=40.875<-2725 ze=93.825<-5745 Statuses=0009 0009 06:41:11 Msec=2250 True Az=40.875 Ze=93.825 Az status=0009 Ze status=0009 06:41:11 Check angles 06:41:11 SkyScan query 06:41:12 SkyScan query done: ret=0 az=41.01<-2734 ze=72.87<-7142 Statuses=0008 0009 06:41:12 Msec=3000 True Az=41.01 Ze=72.87 Az status=0008 Ze status=0009 06:41:12 Check angles 06:41:12 SkyScan query 06:41:13 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 06:41:13 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 06:41:13 Check angles 06:41:13 SkyScan query 06:41:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:41:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:41:13 Message to Master queued w/err=0: serial=3691 error=0 06:41:18 Received message from Master: op=Filter serial=3692 06:41:18 Color wheel filter change from 0 to 0 06:41:18 FLIGetFilterPos err=0 currentPosition=0 06:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:41:18 Filter is already there-color wheel unchanged 06:41:19 Received message from Master: op=Shutter serial=3693 06:41:19 Shutter LASER close 06:41:19 Received message from Camera: op=State serial=3695 06:41:19 GetSingleValue result=40 Value=cccccccc 06:41:19 SkyScan query 06:41:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:19 Parameters OK 06:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:19 Set A/D data flow result=40 06:41:19 Set A/D channel type result=40 06:41:19 Set A/D encoding result=40 06:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:19 Set channel filter=0.000000e+000 result=40 06:41:19 Config A/D Result=40 06:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:19 Get A/D filter: -9.255963e+061 result=40 06:41:19 Get A/D value=-858993460 result=40 06:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:41:19 Parameters OK 06:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:41:19 Set A/D data flow result=40 06:41:19 Set A/D channel type result=40 06:41:19 Set A/D encoding result=40 06:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:41:19 Set channel filter=0.000000e+000 result=40 06:41:19 Config A/D Result=40 06:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:41:19 Get A/D filter: -9.255963e+061 result=40 06:41:19 Get A/D value=-858993460 result=40 06:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:41:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:41:19 Aux= 06:41:19 Message to Camera, serial 3695 queued 06:41:50 Received message from Master: op=PointingHead serial=3702 06:41:50 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:41:50 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:41:50 Point started: ret=0 06:41:50 point_skyscan result=0 06:41:51 Check angles 06:41:51 SkyScan query 06:41:52 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 06:41:52 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 06:41:52 Check angles 06:41:52 SkyScan query 06:41:53 SkyScan query done: ret=0 az=82.005<-5467 ze=66.495<-7567 Statuses=0009 0008 06:41:53 Msec=750 True Az=82.005 Ze=66.495 Az status=0009 Ze status=0008 06:41:53 Check angles 06:41:53 SkyScan query 06:41:53 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 06:41:53 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 06:41:54 Check angles 06:41:54 SkyScan query 06:41:54 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 06:41:54 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 06:41:54 Check angles 06:41:54 SkyScan query 06:41:55 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 06:41:55 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 06:41:55 Check angles 06:41:55 SkyScan query 06:41:56 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 06:41:56 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 06:41:56 Check angles 06:41:56 SkyScan query 06:41:56 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:41:56 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:41:56 Message to Master queued w/err=0: serial=3702 error=0 06:42:01 Received message from Master: op=Filter serial=3703 06:42:01 Color wheel filter change from 0 to 0 06:42:01 FLIGetFilterPos err=0 currentPosition=0 06:42:01 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:01 Filter is already there-color wheel unchanged 06:42:02 Received message from Master: op=Shutter serial=3704 06:42:02 Shutter LASER close 06:42:02 Received message from Camera: op=State serial=3706 06:42:02 GetSingleValue result=40 Value=cccccccc 06:42:02 SkyScan query 06:42:02 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:42:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:02 Parameters OK 06:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:02 Set A/D data flow result=40 06:42:02 Set A/D channel type result=40 06:42:02 Set A/D encoding result=40 06:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:02 Set channel filter=0.000000e+000 result=40 06:42:02 Config A/D Result=40 06:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:02 Get A/D filter: -9.255963e+061 result=40 06:42:02 Get A/D value=-858993460 result=40 06:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:02 Parameters OK 06:42:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:02 Set A/D data flow result=40 06:42:02 Set A/D channel type result=40 06:42:02 Set A/D encoding result=40 06:42:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:02 Set channel filter=0.000000e+000 result=40 06:42:02 Config A/D Result=40 06:42:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:02 Get A/D filter: -9.255963e+061 result=40 06:42:02 Get A/D value=-858993460 result=40 06:42:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:02 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:02 Aux= 06:42:02 Message to Camera, serial 3706 queued 06:42:33 Received message from Master: op=PointingHead serial=3713 06:42:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:42:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:42:33 Point started: ret=0 06:42:33 point_skyscan result=0 06:42:34 Check angles 06:42:34 SkyScan query 06:42:35 SkyScan query done: ret=0 az=134.565<-8971 ze=36.18<-9588 Statuses=0009 0009 06:42:35 Msec=0 True Az=134.565 Ze=36.18 Az status=0009 Ze status=0009 06:42:35 Check angles 06:42:35 SkyScan query 06:42:35 SkyScan query done: ret=0 az=117.03<-7802 ze=15.24<-10984 Statuses=0009 0009 06:42:35 Msec=750 True Az=117.03 Ze=15.24 Az status=0009 Ze status=0009 06:42:36 Check angles 06:42:36 SkyScan query 06:42:36 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.73<-12382 Statuses=0009 0009 06:42:36 Msec=1500 True Az=99.66 Ze=-5.73 Az status=0009 Ze status=0009 06:42:36 Check angles 06:42:36 SkyScan query 06:42:37 SkyScan query done: ret=0 az=82.185<-5479 ze=-26.7<-13780 Statuses=0009 0009 06:42:37 Msec=2250 True Az=82.185 Ze=-26.7 Az status=0009 Ze status=0009 06:42:37 Check angles 06:42:37 SkyScan query 06:42:38 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.565<-14571 Statuses=0009 0008 06:42:38 Msec=3000 True Az=64.71 Ze=-38.565 Az status=0009 Ze status=0008 06:42:38 Check angles 06:42:38 SkyScan query 06:42:38 SkyScan query done: ret=0 az=47.28<-3152 ze=-38.535<-14569 Statuses=0009 0008 06:42:38 Msec=3750 True Az=47.28 Ze=-38.535 Az status=0009 Ze status=0008 06:42:39 Check angles 06:42:39 SkyScan query 06:42:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:42:39 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:42:39 Message to Master queued w/err=0: serial=3713 error=0 06:42:44 Received message from Master: op=Filter serial=3714 06:42:44 Color wheel filter change from 0 to 0 06:42:44 FLIGetFilterPos err=0 currentPosition=0 06:42:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:42:44 Filter is already there-color wheel unchanged 06:42:44 Received message from Master: op=Shutter serial=3715 06:42:44 Shutter LASER close 06:42:44 Received message from Camera: op=State serial=3717 06:42:44 GetSingleValue result=40 Value=cccccccc 06:42:44 SkyScan query 06:42:45 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:42:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:45 Parameters OK 06:42:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:45 Set A/D data flow result=40 06:42:45 Set A/D channel type result=40 06:42:45 Set A/D encoding result=40 06:42:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:45 Set channel filter=0.000000e+000 result=40 06:42:45 Config A/D Result=40 06:42:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:45 Get A/D filter: -9.255963e+061 result=40 06:42:45 Get A/D value=-858993460 result=40 06:42:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:42:45 Parameters OK 06:42:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:42:45 Set A/D data flow result=40 06:42:45 Set A/D channel type result=40 06:42:45 Set A/D encoding result=40 06:42:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:42:45 Set channel filter=0.000000e+000 result=40 06:42:45 Config A/D Result=40 06:42:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:42:45 Get A/D filter: -9.255963e+061 result=40 06:42:45 Get A/D value=-858993460 result=40 06:42:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:42:45 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:42:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:42:45 Aux= 06:42:45 Message to Camera, serial 3717 queued 06:43:16 Received message from Master: op=PointingHead serial=3724 06:43:16 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:43:16 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:43:16 Point started: ret=0 06:43:16 point_skyscan result=0 06:43:17 Check angles 06:43:17 SkyScan query 06:43:18 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.775<-16585 Statuses=0009 0009 06:43:18 Msec=0 True Az=64.23 Ze=-68.775 Az status=0009 Ze status=0009 06:43:18 Check angles 06:43:18 SkyScan query 06:43:18 SkyScan query done: ret=0 az=82.395<-5493 ze=-90.165<-18011 Statuses=0009 0009 06:43:18 Msec=750 True Az=82.395 Ze=-90.165 Az status=0009 Ze status=0009 06:43:18 Check angles 06:43:18 SkyScan query 06:43:19 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.12<-19408 Statuses=0009 0009 06:43:19 Msec=1500 True Az=99.705 Ze=-111.12 Az status=0009 Ze status=0009 06:43:19 Check angles 06:43:19 SkyScan query 06:43:20 SkyScan query done: ret=0 az=117.09<-7806 ze=-132.12<-20808 Statuses=0009 0009 06:43:20 Msec=2250 True Az=117.09 Ze=-132.12 Az status=0009 Ze status=0009 06:43:20 Check angles 06:43:20 SkyScan query 06:43:21 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 06:43:21 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 06:43:21 Check angles 06:43:21 SkyScan query 06:43:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:43:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:43:21 Message to Master queued w/err=0: serial=3724 error=0 06:43:26 Received message from Master: op=Filter serial=3725 06:43:26 Color wheel filter change from 0 to 0 06:43:26 FLIGetFilterPos err=0 currentPosition=0 06:43:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:43:26 Filter is already there-color wheel unchanged 06:43:26 Received message from Master: op=Shutter serial=3726 06:43:26 Shutter LASER close 06:43:27 Received message from Camera: op=State serial=3728 06:43:27 GetSingleValue result=40 Value=cccccccc 06:43:27 SkyScan query 06:43:27 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:43:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:27 Parameters OK 06:43:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:27 Set A/D data flow result=40 06:43:27 Set A/D channel type result=40 06:43:27 Set A/D encoding result=40 06:43:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:27 Set channel filter=0.000000e+000 result=40 06:43:27 Config A/D Result=40 06:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:27 Get A/D filter: -9.255963e+061 result=40 06:43:27 Get A/D value=-858993460 result=40 06:43:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:43:27 Parameters OK 06:43:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:43:27 Set A/D data flow result=40 06:43:27 Set A/D channel type result=40 06:43:27 Set A/D encoding result=40 06:43:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:43:27 Set channel filter=0.000000e+000 result=40 06:43:27 Config A/D Result=40 06:43:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:43:27 Get A/D filter: -9.255963e+061 result=40 06:43:27 Get A/D value=-858993460 result=40 06:43:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:43:27 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:43:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:43:27 Aux= 06:43:27 Message to Camera, serial 3728 queued 06:43:58 Received message from Master: op=PointingHead serial=3735 06:43:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:43:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:43:58 Point started: ret=0 06:43:58 point_skyscan result=0 06:43:59 Check angles 06:43:59 SkyScan query 06:44:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.39<-23426 Statuses=0009 0009 06:44:00 Msec=0 True Az=113.01 Ze=-171.39 Az status=0009 Ze status=0009 06:44:00 Check angles 06:44:00 SkyScan query 06:44:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:44:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:44:00 Message to Master queued w/err=0: serial=3735 error=0 06:44:05 Received message from Master: op=Filter serial=3736 06:44:05 Color wheel filter change from 0 to 0 06:44:05 FLIGetFilterPos err=0 currentPosition=0 06:44:05 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:05 Filter is already there-color wheel unchanged 06:44:06 Received message from Master: op=Shutter serial=3737 06:44:06 Shutter LASER open 06:44:06 Received message from Camera: op=State serial=3739 06:44:06 GetSingleValue result=40 Value=cccccccc 06:44:06 SkyScan query 06:44:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:44:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:06 Parameters OK 06:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:06 Set A/D data flow result=40 06:44:06 Set A/D channel type result=40 06:44:06 Set A/D encoding result=40 06:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:06 Set channel filter=0.000000e+000 result=40 06:44:06 Config A/D Result=40 06:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:06 Get A/D filter: -9.255963e+061 result=40 06:44:06 Get A/D value=-858993460 result=40 06:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:06 Parameters OK 06:44:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:06 Set A/D data flow result=40 06:44:06 Set A/D channel type result=40 06:44:06 Set A/D encoding result=40 06:44:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:06 Set channel filter=0.000000e+000 result=40 06:44:06 Config A/D Result=40 06:44:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:06 Get A/D filter: -9.255963e+061 result=40 06:44:06 Get A/D value=-858993460 result=40 06:44:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:06 Aux= 06:44:06 Message to Camera, serial 3739 queued 06:44:09 Received message from Master: op=Shutter serial=3743 06:44:09 Shutter LASER close 06:44:09 Received message from Master: op=PointingHead serial=3747 06:44:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:44:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:44:10 Point started: ret=0 06:44:10 point_skyscan result=0 06:44:10 Check angles 06:44:10 SkyScan query 06:44:11 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.935<-21529 Statuses=0009 0009 06:44:11 Msec=0 True Az=136.38 Ze=-142.935 Az status=0009 Ze status=0009 06:44:11 Check angles 06:44:11 SkyScan query 06:44:12 SkyScan query done: ret=0 az=154.26<-10284 ze=-121.38<-20092 Statuses=0009 0009 06:44:12 Msec=750 True Az=154.26 Ze=-121.38 Az status=0009 Ze status=0009 06:44:12 Check angles 06:44:12 SkyScan query 06:44:13 SkyScan query done: ret=0 az=171.675<-11445 ze=-100.59<-18706 Statuses=0009 0009 06:44:13 Msec=1500 True Az=171.675 Ze=-100.59 Az status=0009 Ze status=0009 06:44:13 Check angles 06:44:13 SkyScan query 06:44:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 06:44:13 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 06:44:13 Check angles 06:44:13 SkyScan query 06:44:14 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 06:44:14 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 06:44:14 Check angles 06:44:14 SkyScan query 06:44:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:44:15 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:44:15 Message to Master queued w/err=0: serial=3747 error=0 06:44:20 Received message from Master: op=Filter serial=3748 06:44:20 Color wheel filter change from 0 to 0 06:44:20 FLIGetFilterPos err=0 currentPosition=0 06:44:20 FLIGetStepsRemaining err=0 RemainingSteps=0 06:44:20 Filter is already there-color wheel unchanged 06:44:20 Received message from Master: op=Shutter serial=3749 06:44:20 Shutter LASER close 06:44:20 Received message from Camera: op=State serial=3751 06:44:20 GetSingleValue result=40 Value=cccccccc 06:44:20 SkyScan query 06:44:21 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:44:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:21 Parameters OK 06:44:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:21 Set A/D data flow result=40 06:44:21 Set A/D channel type result=40 06:44:21 Set A/D encoding result=40 06:44:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:21 Set channel filter=0.000000e+000 result=40 06:44:21 Config A/D Result=40 06:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:21 Get A/D filter: -9.255963e+061 result=40 06:44:21 Get A/D value=-858993460 result=40 06:44:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:44:21 Parameters OK 06:44:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:44:21 Set A/D data flow result=40 06:44:21 Set A/D channel type result=40 06:44:21 Set A/D encoding result=40 06:44:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:44:21 Set channel filter=0.000000e+000 result=40 06:44:21 Config A/D Result=40 06:44:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:44:21 Get A/D filter: -9.255963e+061 result=40 06:44:21 Get A/D value=-858993460 result=40 06:44:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:44:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:44:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:44:21 Aux= 06:44:21 Message to Camera, serial 3751 queued 06:44:52 Received message from Master: op=PointingHead serial=3758 06:44:52 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:44:52 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:44:52 Point started: ret=0 06:44:52 point_skyscan result=0 06:44:53 Check angles 06:44:53 SkyScan query 06:44:53 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.81<-13454 Statuses=0009 0009 06:44:53 Msec=0 True Az=152.97 Ze=-21.81 Az status=0009 Ze status=0009 06:44:53 Check angles 06:44:53 SkyScan query 06:44:54 SkyScan query done: ret=0 az=135.285<-9019 ze=-0.42<-12028 Statuses=0009 0009 06:44:54 Msec=750 True Az=135.285 Ze=-0.42 Az status=0009 Ze status=0009 06:44:54 Check angles 06:44:54 SkyScan query 06:44:55 SkyScan query done: ret=0 az=117.72<-7848 ze=20.535<-10631 Statuses=0009 0009 06:44:55 Msec=1500 True Az=117.72 Ze=20.535 Az status=0009 Ze status=0009 06:44:55 Check angles 06:44:55 SkyScan query 06:44:55 SkyScan query done: ret=0 az=100.35<-6690 ze=41.475<-9235 Statuses=0009 0009 06:44:55 Msec=2250 True Az=100.35 Ze=41.475 Az status=0009 Ze status=0009 06:44:56 Check angles 06:44:56 SkyScan query 06:44:56 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:44:56 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:44:56 Check angles 06:44:56 SkyScan query 06:44:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:44:57 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:44:57 Message to Master queued w/err=0: serial=3758 error=0 06:45:02 Received message from Master: op=Filter serial=3759 06:45:02 Color wheel filter change from 0 to 0 06:45:02 FLIGetFilterPos err=0 currentPosition=0 06:45:02 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:02 Filter is already there-color wheel unchanged 06:45:02 Received message from Master: op=Shutter serial=3760 06:45:02 Shutter LASER close 06:45:02 Received message from Camera: op=State serial=3762 06:45:02 GetSingleValue result=40 Value=cccccccc 06:45:02 SkyScan query 06:45:03 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:45:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:03 Parameters OK 06:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:03 Set A/D data flow result=40 06:45:03 Set A/D channel type result=40 06:45:03 Set A/D encoding result=40 06:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:03 Set channel filter=0.000000e+000 result=40 06:45:03 Config A/D Result=40 06:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:03 Get A/D filter: -9.255963e+061 result=40 06:45:03 Get A/D value=-858993460 result=40 06:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:03 Parameters OK 06:45:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:03 Set A/D data flow result=40 06:45:03 Set A/D channel type result=40 06:45:03 Set A/D encoding result=40 06:45:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:03 Set channel filter=0.000000e+000 result=40 06:45:03 Config A/D Result=40 06:45:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:03 Get A/D filter: -9.255963e+061 result=40 06:45:03 Get A/D value=-858993460 result=40 06:45:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:03 Aux= 06:45:03 Message to Camera, serial 3762 queued 06:45:34 Received message from Master: op=PointingHead serial=3769 06:45:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:45:34 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:45:34 Point started: ret=0 06:45:34 point_skyscan result=0 06:45:35 Check angles 06:45:35 SkyScan query 06:45:35 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 06:45:35 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 06:45:36 Check angles 06:45:36 SkyScan query 06:45:36 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 06:45:36 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 06:45:36 Check angles 06:45:36 SkyScan query 06:45:37 SkyScan query done: ret=0 az=144.66<-9644 ze=38.505<-9433 Statuses=0009 0008 06:45:37 Msec=1500 True Az=144.66 Ze=38.505 Az status=0009 Ze status=0008 06:45:37 Check angles 06:45:37 SkyScan query 06:45:38 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 06:45:38 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 06:45:38 Check angles 06:45:38 SkyScan query 06:45:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 06:45:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 06:45:39 Check angles 06:45:39 SkyScan query 06:45:39 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:45:39 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:45:39 Message to Master queued w/err=0: serial=3769 error=0 06:45:44 Received message from Master: op=Filter serial=3770 06:45:44 Color wheel filter change from 0 to 0 06:45:44 FLIGetFilterPos err=0 currentPosition=0 06:45:44 FLIGetStepsRemaining err=0 RemainingSteps=0 06:45:44 Filter is already there-color wheel unchanged 06:45:44 Received message from Master: op=Shutter serial=3771 06:45:44 Shutter LASER close 06:45:44 Received message from Camera: op=State serial=3773 06:45:44 GetSingleValue result=40 Value=cccccccc 06:45:44 SkyScan query 06:45:45 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:45:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:45 Parameters OK 06:45:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:45 Set A/D data flow result=40 06:45:45 Set A/D channel type result=40 06:45:45 Set A/D encoding result=40 06:45:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:45 Set channel filter=0.000000e+000 result=40 06:45:45 Config A/D Result=40 06:45:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:45 Get A/D filter: -9.255963e+061 result=40 06:45:45 Get A/D value=-858993460 result=40 06:45:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:45:45 Parameters OK 06:45:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:45:45 Set A/D data flow result=40 06:45:45 Set A/D channel type result=40 06:45:45 Set A/D encoding result=40 06:45:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:45:45 Set channel filter=0.000000e+000 result=40 06:45:45 Config A/D Result=40 06:45:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:45:45 Get A/D filter: -9.255963e+061 result=40 06:45:45 Get A/D value=-858993460 result=40 06:45:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:45:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:45:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:45:45 Aux= 06:45:45 Message to Camera, serial 3773 queued 06:46:16 Received message from Master: op=PointingHead serial=3780 06:46:16 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:46:16 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:46:16 Point started: ret=0 06:46:16 point_skyscan result=0 06:46:17 Check angles 06:46:17 SkyScan query 06:46:17 SkyScan query done: ret=0 az=152.73<-10182 ze=8.325<-11445 Statuses=0009 0009 06:46:17 Msec=0 True Az=152.73 Ze=8.325 Az status=0009 Ze status=0009 06:46:18 Check angles 06:46:18 SkyScan query 06:46:18 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.63<-12842 Statuses=0009 0009 06:46:18 Msec=750 True Az=135.18 Ze=-12.63 Az status=0009 Ze status=0009 06:46:18 Check angles 06:46:18 SkyScan query 06:46:19 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.54<-14236 Statuses=0009 0009 06:46:19 Msec=1500 True Az=117.765 Ze=-33.54 Az status=0009 Ze status=0009 06:46:19 Check angles 06:46:19 SkyScan query 06:46:20 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.54<-15436 Statuses=0009 0009 06:46:20 Msec=2250 True Az=100.38 Ze=-51.54 Az status=0009 Ze status=0009 06:46:20 Check angles 06:46:20 SkyScan query 06:46:20 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 06:46:20 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 06:46:21 Check angles 06:46:21 SkyScan query 06:46:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 06:46:21 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 06:46:21 Message to Master queued w/err=0: serial=3780 error=0 06:46:26 Received message from Master: op=Filter serial=3781 06:46:26 Color wheel filter change from 0 to 0 06:46:26 FLIGetFilterPos err=0 currentPosition=0 06:46:26 FLIGetStepsRemaining err=0 RemainingSteps=0 06:46:26 Filter is already there-color wheel unchanged 06:46:26 Received message from Master: op=Shutter serial=3782 06:46:26 Shutter LASER close 06:46:26 Received message from Camera: op=State serial=3784 06:46:26 GetSingleValue result=40 Value=cccccccc 06:46:26 SkyScan query 06:46:27 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:46:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:27 Parameters OK 06:46:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:27 Set A/D data flow result=40 06:46:27 Set A/D channel type result=40 06:46:27 Set A/D encoding result=40 06:46:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:27 Set channel filter=0.000000e+000 result=40 06:46:27 Config A/D Result=40 06:46:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:27 Get A/D filter: -9.255963e+061 result=40 06:46:27 Get A/D value=-858993460 result=40 06:46:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:46:27 Parameters OK 06:46:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:46:27 Set A/D data flow result=40 06:46:27 Set A/D channel type result=40 06:46:27 Set A/D encoding result=40 06:46:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:46:27 Set channel filter=0.000000e+000 result=40 06:46:27 Config A/D Result=40 06:46:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:46:27 Get A/D filter: -9.255963e+061 result=40 06:46:27 Get A/D value=-858993460 result=40 06:46:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:46:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:46:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:46:27 Aux= 06:46:27 Message to Camera, serial 3784 queued 06:46:58 Received message from Master: op=PointingHead serial=3791 06:46:58 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:46:58 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:46:58 Point started: ret=0 06:46:58 point_skyscan result=0 06:46:59 Check angles 06:46:59 SkyScan query 06:47:00 SkyScan query done: ret=0 az=109.065<-7271 ze=-81.315<-17421 Statuses=0009 0009 06:47:00 Msec=0 True Az=109.065 Ze=-81.315 Az status=0009 Ze status=0009 06:47:00 Check angles 06:47:00 SkyScan query 06:47:00 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.255<-18817 Statuses=0008 0009 06:47:00 Msec=750 True Az=113.01 Ze=-102.255 Az status=0008 Ze status=0009 06:47:01 Check angles 06:47:01 SkyScan query 06:47:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 06:47:01 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 06:47:01 Check angles 06:47:01 SkyScan query 06:47:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 06:47:02 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 06:47:02 Check angles 06:47:02 SkyScan query 06:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 06:47:03 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 06:47:03 Check angles 06:47:03 SkyScan query 06:47:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:47:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:47:03 Message to Master queued w/err=0: serial=3791 error=0 06:47:08 Received message from Master: op=Filter serial=3792 06:47:08 Color wheel filter change from 0 to 0 06:47:08 FLIGetFilterPos err=0 currentPosition=0 06:47:08 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:08 Filter is already there-color wheel unchanged 06:47:09 Received message from Master: op=Shutter serial=3793 06:47:09 Shutter LASER open 06:47:09 Received message from Camera: op=State serial=3795 06:47:09 GetSingleValue result=40 Value=cccccccc 06:47:09 SkyScan query 06:47:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:47:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:09 Parameters OK 06:47:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:09 Set A/D data flow result=40 06:47:09 Set A/D channel type result=40 06:47:09 Set A/D encoding result=40 06:47:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:09 Set channel filter=0.000000e+000 result=40 06:47:09 Config A/D Result=40 06:47:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:09 Get A/D filter: -9.255963e+061 result=40 06:47:09 Get A/D value=-858993460 result=40 06:47:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:09 Parameters OK 06:47:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:09 Set A/D data flow result=40 06:47:09 Set A/D channel type result=40 06:47:09 Set A/D encoding result=40 06:47:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:09 Set channel filter=0.000000e+000 result=40 06:47:09 Config A/D Result=40 06:47:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:09 Get A/D filter: -9.255963e+061 result=40 06:47:09 Get A/D value=-858993460 result=40 06:47:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:09 Aux= 06:47:09 Message to Camera, serial 3795 queued 06:47:12 Received message from Master: op=Shutter serial=3799 06:47:12 Shutter LASER close 06:47:12 Received message from Master: op=PointingHead serial=3803 06:47:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:47:12 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:47:13 Point started: ret=0 06:47:13 point_skyscan result=0 06:47:13 Check angles 06:47:13 SkyScan query 06:47:14 SkyScan query done: ret=0 az=89.925<-5995 ze=157.2<-1520 Statuses=0009 0009 06:47:14 Msec=0 True Az=89.925 Ze=157.2 Az status=0009 Ze status=0009 06:47:14 Check angles 06:47:14 SkyScan query 06:47:15 SkyScan query done: ret=0 az=72.405<-4827 ze=136.23<-2918 Statuses=0009 0009 06:47:15 Msec=750 True Az=72.405 Ze=136.23 Az status=0009 Ze status=0009 06:47:15 Check angles 06:47:15 SkyScan query 06:47:15 SkyScan query done: ret=0 az=54.9<-3660 ze=115.29<-4314 Statuses=0009 0009 06:47:15 Msec=1500 True Az=54.9 Ze=115.29 Az status=0009 Ze status=0009 06:47:16 Check angles 06:47:16 SkyScan query 06:47:16 SkyScan query done: ret=0 az=40.89<-2726 ze=93.885<-5741 Statuses=0009 0009 06:47:16 Msec=2250 True Az=40.89 Ze=93.885 Az status=0009 Ze status=0009 06:47:16 Check angles 06:47:16 SkyScan query 06:47:17 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 06:47:17 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 06:47:17 Check angles 06:47:17 SkyScan query 06:47:18 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 06:47:18 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 06:47:18 Check angles 06:47:18 SkyScan query 06:47:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:47:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:47:18 Message to Master queued w/err=0: serial=3803 error=0 06:47:23 Received message from Master: op=Filter serial=3804 06:47:23 Color wheel filter change from 0 to 0 06:47:23 FLIGetFilterPos err=0 currentPosition=0 06:47:23 FLIGetStepsRemaining err=0 RemainingSteps=0 06:47:23 Filter is already there-color wheel unchanged 06:47:24 Received message from Master: op=Shutter serial=3805 06:47:24 Shutter LASER close 06:47:24 Received message from Camera: op=State serial=3807 06:47:24 GetSingleValue result=40 Value=cccccccc 06:47:24 SkyScan query 06:47:24 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:24 Parameters OK 06:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:24 Set A/D data flow result=40 06:47:24 Set A/D channel type result=40 06:47:24 Set A/D encoding result=40 06:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:24 Set channel filter=0.000000e+000 result=40 06:47:24 Config A/D Result=40 06:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:24 Get A/D filter: -9.255963e+061 result=40 06:47:24 Get A/D value=-858993460 result=40 06:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:47:24 Parameters OK 06:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:47:24 Set A/D data flow result=40 06:47:24 Set A/D channel type result=40 06:47:24 Set A/D encoding result=40 06:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:47:24 Set channel filter=0.000000e+000 result=40 06:47:24 Config A/D Result=40 06:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:47:24 Get A/D filter: -9.255963e+061 result=40 06:47:24 Get A/D value=-858993460 result=40 06:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:47:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:47:24 Aux= 06:47:24 Message to Camera, serial 3807 queued 06:47:55 Received message from Master: op=PointingHead serial=3814 06:47:55 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:47:55 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:47:56 Point started: ret=0 06:47:56 point_skyscan result=0 06:47:56 Check angles 06:47:56 SkyScan query 06:47:57 SkyScan query done: ret=0 az=64.215<-4281 ze=66.54<-7564 Statuses=0009 0008 06:47:57 Msec=0 True Az=64.215 Ze=66.54 Az status=0009 Ze status=0008 06:47:57 Check angles 06:47:57 SkyScan query 06:47:58 SkyScan query done: ret=0 az=81.705<-5447 ze=66.495<-7567 Statuses=0009 0008 06:47:58 Msec=750 True Az=81.705 Ze=66.495 Az status=0009 Ze status=0008 06:47:58 Check angles 06:47:58 SkyScan query 06:47:58 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 06:47:58 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 06:47:59 Check angles 06:47:59 SkyScan query 06:47:59 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 06:47:59 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 06:47:59 Check angles 06:47:59 SkyScan query 06:48:00 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 06:48:00 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 06:48:00 Check angles 06:48:00 SkyScan query 06:48:01 SkyScan query done: ret=0 az=151.44<-10096 ze=66.495<-7567 Statuses=0009 0008 06:48:01 Msec=3750 True Az=151.44 Ze=66.495 Az status=0009 Ze status=0008 06:48:01 Check angles 06:48:01 SkyScan query 06:48:01 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 06:48:01 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 06:48:01 Message to Master queued w/err=0: serial=3814 error=0 06:48:06 Received message from Master: op=Filter serial=3815 06:48:06 Color wheel filter change from 0 to 0 06:48:06 FLIGetFilterPos err=0 currentPosition=0 06:48:06 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:06 Filter is already there-color wheel unchanged 06:48:07 Received message from Master: op=Shutter serial=3816 06:48:07 Shutter LASER close 06:48:07 Received message from Camera: op=State serial=3818 06:48:07 GetSingleValue result=40 Value=cccccccc 06:48:07 SkyScan query 06:48:07 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:48:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:07 Parameters OK 06:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:07 Set A/D data flow result=40 06:48:07 Set A/D channel type result=40 06:48:07 Set A/D encoding result=40 06:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:07 Set channel filter=0.000000e+000 result=40 06:48:07 Config A/D Result=40 06:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:07 Get A/D filter: -9.255963e+061 result=40 06:48:07 Get A/D value=-858993460 result=40 06:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:07 Parameters OK 06:48:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:07 Set A/D data flow result=40 06:48:07 Set A/D channel type result=40 06:48:07 Set A/D encoding result=40 06:48:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:07 Set channel filter=0.000000e+000 result=40 06:48:07 Config A/D Result=40 06:48:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:07 Get A/D filter: -9.255963e+061 result=40 06:48:07 Get A/D value=-858993460 result=40 06:48:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:07 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:07 Aux= 06:48:07 Message to Camera, serial 3818 queued 06:48:38 Received message from Master: op=PointingHead serial=3825 06:48:38 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:48:38 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:48:38 Point started: ret=0 06:48:38 point_skyscan result=0 06:48:39 Check angles 06:48:39 SkyScan query 06:48:40 SkyScan query done: ret=0 az=135.18<-9012 ze=36.84<-9544 Statuses=0009 0009 06:48:40 Msec=0 True Az=135.18 Ze=36.84 Az status=0009 Ze status=0009 06:48:40 Check angles 06:48:40 SkyScan query 06:48:40 SkyScan query done: ret=0 az=117.255<-7817 ze=15.465<-10969 Statuses=0009 0009 06:48:40 Msec=750 True Az=117.255 Ze=15.465 Az status=0009 Ze status=0009 06:48:41 Check angles 06:48:41 SkyScan query 06:48:41 SkyScan query done: ret=0 az=99.87<-6658 ze=-5.52<-12368 Statuses=0009 0009 06:48:41 Msec=1500 True Az=99.87 Ze=-5.52 Az status=0009 Ze status=0009 06:48:41 Check angles 06:48:41 SkyScan query 06:48:42 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.49<-13766 Statuses=0009 0009 06:48:42 Msec=2250 True Az=82.395 Ze=-26.49 Az status=0009 Ze status=0009 06:48:42 Check angles 06:48:42 SkyScan query 06:48:43 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 06:48:43 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 06:48:43 Check angles 06:48:43 SkyScan query 06:48:43 SkyScan query done: ret=0 az=47.52<-3168 ze=-38.535<-14569 Statuses=0009 0008 06:48:43 Msec=3750 True Az=47.52 Ze=-38.535 Az status=0009 Ze status=0008 06:48:44 Check angles 06:48:44 SkyScan query 06:48:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:48:44 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 06:48:44 Message to Master queued w/err=0: serial=3825 error=0 06:48:49 Received message from Master: op=Filter serial=3826 06:48:49 Color wheel filter change from 0 to 0 06:48:49 FLIGetFilterPos err=0 currentPosition=0 06:48:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:48:49 Filter is already there-color wheel unchanged 06:48:49 Received message from Master: op=Shutter serial=3827 06:48:49 Shutter LASER close 06:48:49 Received message from Camera: op=State serial=3829 06:48:49 GetSingleValue result=40 Value=cccccccc 06:48:49 SkyScan query 06:48:50 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:48:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:50 Parameters OK 06:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:50 Set A/D data flow result=40 06:48:50 Set A/D channel type result=40 06:48:50 Set A/D encoding result=40 06:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:50 Set channel filter=0.000000e+000 result=40 06:48:50 Config A/D Result=40 06:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:50 Get A/D filter: -9.255963e+061 result=40 06:48:50 Get A/D value=-858993460 result=40 06:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:48:50 Parameters OK 06:48:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:48:50 Set A/D data flow result=40 06:48:50 Set A/D channel type result=40 06:48:50 Set A/D encoding result=40 06:48:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:48:50 Set channel filter=0.000000e+000 result=40 06:48:50 Config A/D Result=40 06:48:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:48:50 Get A/D filter: -9.255963e+061 result=40 06:48:50 Get A/D value=-858993460 result=40 06:48:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:48:50 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:48:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:48:50 Aux= 06:48:50 Message to Camera, serial 3829 queued 06:49:21 Received message from Master: op=PointingHead serial=3836 06:49:21 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:49:21 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:49:21 Point started: ret=0 06:49:21 point_skyscan result=0 06:49:22 Check angles 06:49:22 SkyScan query 06:49:22 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.715<-16581 Statuses=0009 0009 06:49:22 Msec=0 True Az=64.23 Ze=-68.715 Az status=0009 Ze status=0009 06:49:23 Check angles 06:49:23 SkyScan query 06:49:23 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.67<-17978 Statuses=0009 0009 06:49:23 Msec=750 True Az=81.9 Ze=-89.67 Az status=0009 Ze status=0009 06:49:23 Check angles 06:49:23 SkyScan query 06:49:24 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.61<-19374 Statuses=0009 0009 06:49:24 Msec=1500 True Az=99.345 Ze=-110.61 Az status=0009 Ze status=0009 06:49:24 Check angles 06:49:24 SkyScan query 06:49:25 SkyScan query done: ret=0 az=117.18<-7812 ze=-132<-20800 Statuses=0009 0009 06:49:25 Msec=2250 True Az=117.18 Ze=-132 Az status=0009 Ze status=0009 06:49:25 Check angles 06:49:25 SkyScan query 06:49:26 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 06:49:26 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 06:49:26 Check angles [UTC 2018-12-4 06:49:26] 06:49:26 SkyScan query 06:49:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:49:26 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:49:26 Message to Master queued w/err=0: serial=3836 error=0 06:49:31 Received message from Master: op=Filter serial=3837 06:49:31 Color wheel filter change from 0 to 0 06:49:31 FLIGetFilterPos err=0 currentPosition=0 06:49:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:49:31 Filter is already there-color wheel unchanged 06:49:32 Received message from Master: op=Shutter serial=3838 06:49:32 Shutter LASER close 06:49:32 Received message from Camera: op=State serial=3840 06:49:32 GetSingleValue result=40 Value=cccccccc 06:49:32 SkyScan query 06:49:32 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:49:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:32 Parameters OK 06:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:32 Set A/D data flow result=40 06:49:32 Set A/D channel type result=40 06:49:32 Set A/D encoding result=40 06:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:32 Set channel filter=0.000000e+000 result=40 06:49:32 Config A/D Result=40 06:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:32 Get A/D filter: -9.255963e+061 result=40 06:49:32 Get A/D value=-858993460 result=40 06:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:49:32 Parameters OK 06:49:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:49:32 Set A/D data flow result=40 06:49:32 Set A/D channel type result=40 06:49:32 Set A/D encoding result=40 06:49:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:49:32 Set channel filter=0.000000e+000 result=40 06:49:32 Config A/D Result=40 06:49:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:49:32 Get A/D filter: -9.255963e+061 result=40 06:49:32 Get A/D value=-858993460 result=40 06:49:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:49:32 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:49:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:49:32 Aux= 06:49:32 Message to Camera, serial 3840 queued 06:50:03 Received message from Master: op=PointingHead serial=3847 06:50:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:50:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:50:03 Point started: ret=0 06:50:03 point_skyscan result=0 06:50:04 Check angles 06:50:04 SkyScan query 06:50:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.51<-23434 Statuses=0009 0009 06:50:05 Msec=0 True Az=113.01 Ze=-171.51 Az status=0009 Ze status=0009 06:50:05 Check angles 06:50:05 SkyScan query 06:50:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:50:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:50:05 Message to Master queued w/err=0: serial=3847 error=0 06:50:10 Received message from Master: op=Filter serial=3848 06:50:10 Color wheel filter change from 0 to 0 06:50:10 FLIGetFilterPos err=0 currentPosition=0 06:50:10 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:10 Filter is already there-color wheel unchanged 06:50:11 Received message from Master: op=Shutter serial=3849 06:50:11 Shutter LASER open 06:50:11 Received message from Camera: op=State serial=3851 06:50:11 GetSingleValue result=40 Value=cccccccc 06:50:11 SkyScan query 06:50:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:50:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:11 Parameters OK 06:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:11 Set A/D data flow result=40 06:50:11 Set A/D channel type result=40 06:50:11 Set A/D encoding result=40 06:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:11 Set channel filter=0.000000e+000 result=40 06:50:11 Config A/D Result=40 06:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:11 Get A/D filter: -9.255963e+061 result=40 06:50:11 Get A/D value=-858993460 result=40 06:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:11 Parameters OK 06:50:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:11 Set A/D data flow result=40 06:50:11 Set A/D channel type result=40 06:50:11 Set A/D encoding result=40 06:50:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:11 Set channel filter=0.000000e+000 result=40 06:50:11 Config A/D Result=40 06:50:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:11 Get A/D filter: -9.255963e+061 result=40 06:50:11 Get A/D value=-858993460 result=40 06:50:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:11 Aux= 06:50:11 Message to Camera, serial 3851 queued 06:50:14 Received message from Master: op=Shutter serial=3855 06:50:14 Shutter LASER close 06:50:14 Received message from Master: op=PointingHead serial=3859 06:50:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:50:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:50:15 Point started: ret=0 06:50:15 point_skyscan result=0 06:50:16 Check angles 06:50:16 SkyScan query 06:50:16 SkyScan query done: ret=0 az=136.41<-9094 ze=-142.71<-21514 Statuses=0009 0009 06:50:16 Msec=0 True Az=136.41 Ze=-142.71 Az status=0009 Ze status=0009 06:50:16 Check angles 06:50:16 SkyScan query 06:50:17 SkyScan query done: ret=0 az=154.305<-10287 ze=-121.305<-20087 Statuses=0009 0009 06:50:17 Msec=750 True Az=154.305 Ze=-121.305 Az status=0009 Ze status=0009 06:50:17 Check angles 06:50:17 SkyScan query 06:50:18 SkyScan query done: ret=0 az=171.855<-11457 ze=-100.35<-18690 Statuses=0009 0009 06:50:18 Msec=1500 True Az=171.855 Ze=-100.35 Az status=0009 Ze status=0009 06:50:18 Check angles 06:50:18 SkyScan query 06:50:18 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.38<-17292 Statuses=0008 0009 06:50:18 Msec=2250 True Az=176.025 Ze=-79.38 Az status=0008 Ze status=0009 06:50:19 Check angles 06:50:19 SkyScan query 06:50:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.44<-15896 Statuses=0008 0009 06:50:19 Msec=3000 True Az=175.995 Ze=-58.44 Az status=0008 Ze status=0009 06:50:19 Check angles 06:50:19 SkyScan query 06:50:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:50:20 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:50:20 Message to Master queued w/err=0: serial=3859 error=0 06:50:25 Received message from Master: op=Filter serial=3860 06:50:25 Color wheel filter change from 0 to 0 06:50:25 FLIGetFilterPos err=0 currentPosition=0 06:50:25 FLIGetStepsRemaining err=0 RemainingSteps=0 06:50:25 Filter is already there-color wheel unchanged 06:50:25 Received message from Master: op=Shutter serial=3861 06:50:25 Shutter LASER close 06:50:25 Received message from Camera: op=State serial=3863 06:50:25 GetSingleValue result=40 Value=cccccccc 06:50:25 SkyScan query 06:50:26 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:50:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:26 Parameters OK 06:50:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:26 Set A/D data flow result=40 06:50:26 Set A/D channel type result=40 06:50:26 Set A/D encoding result=40 06:50:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:26 Set channel filter=0.000000e+000 result=40 06:50:26 Config A/D Result=40 06:50:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:26 Get A/D filter: -9.255963e+061 result=40 06:50:26 Get A/D value=-858993460 result=40 06:50:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:50:26 Parameters OK 06:50:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:50:26 Set A/D data flow result=40 06:50:26 Set A/D channel type result=40 06:50:26 Set A/D encoding result=40 06:50:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:50:26 Set channel filter=0.000000e+000 result=40 06:50:26 Config A/D Result=40 06:50:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:50:26 Get A/D filter: -9.255963e+061 result=40 06:50:26 Get A/D value=-858993460 result=40 06:50:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:50:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:50:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:50:26 Aux= 06:50:26 Message to Camera, serial 3863 queued 06:50:57 Received message from Master: op=PointingHead serial=3870 06:50:57 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:50:57 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:50:57 Point started: ret=0 06:50:57 point_skyscan result=0 06:50:58 Check angles 06:50:58 SkyScan query 06:50:58 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.495<-13433 Statuses=0009 0009 06:50:58 Msec=0 True Az=152.76 Ze=-21.495 Az status=0009 Ze status=0009 06:50:58 Check angles 06:50:58 SkyScan query 06:50:59 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.54<-12036 Statuses=0009 0009 06:50:59 Msec=750 True Az=135.375 Ze=-0.54 Az status=0009 Ze status=0009 06:50:59 Check angles 06:50:59 SkyScan query 06:51:00 SkyScan query done: ret=0 az=117.825<-7855 ze=20.49<-10634 Statuses=0009 0009 06:51:00 Msec=1500 True Az=117.825 Ze=20.49 Az status=0009 Ze status=0009 06:51:00 Check angles 06:51:00 SkyScan query 06:51:01 SkyScan query done: ret=0 az=100.41<-6694 ze=41.355<-9243 Statuses=0009 0009 06:51:01 Msec=2250 True Az=100.41 Ze=41.355 Az status=0009 Ze status=0009 06:51:01 Check angles 06:51:01 SkyScan query 06:51:01 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 06:51:01 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 06:51:01 Check angles 06:51:01 SkyScan query 06:51:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:51:02 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:51:02 Message to Master queued w/err=0: serial=3870 error=0 06:51:07 Received message from Master: op=Filter serial=3871 06:51:07 Color wheel filter change from 0 to 0 06:51:07 FLIGetFilterPos err=0 currentPosition=0 06:51:07 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:07 Filter is already there-color wheel unchanged 06:51:07 Received message from Master: op=Shutter serial=3872 06:51:07 Shutter LASER close 06:51:07 Received message from Camera: op=State serial=3874 06:51:07 GetSingleValue result=40 Value=cccccccc 06:51:07 SkyScan query 06:51:08 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:51:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:08 Parameters OK 06:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:08 Set A/D data flow result=40 06:51:08 Set A/D channel type result=40 06:51:08 Set A/D encoding result=40 06:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:08 Set channel filter=0.000000e+000 result=40 06:51:08 Config A/D Result=40 06:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:08 Get A/D filter: -9.255963e+061 result=40 06:51:08 Get A/D value=-858993460 result=40 06:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:08 Parameters OK 06:51:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:08 Set A/D data flow result=40 06:51:08 Set A/D channel type result=40 06:51:08 Set A/D encoding result=40 06:51:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:08 Set channel filter=0.000000e+000 result=40 06:51:08 Config A/D Result=40 06:51:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:08 Get A/D filter: -9.255963e+061 result=40 06:51:08 Get A/D value=-858993460 result=40 06:51:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:08 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:08 Aux= 06:51:08 Message to Camera, serial 3874 queued 06:51:39 Received message from Master: op=PointingHead serial=3881 06:51:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:51:39 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:51:39 Point started: ret=0 06:51:39 point_skyscan result=0 06:51:40 Check angles 06:51:40 SkyScan query 06:51:40 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 06:51:40 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 06:51:41 Check angles 06:51:41 SkyScan query 06:51:41 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 06:51:41 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 06:51:41 Check angles 06:51:41 SkyScan query 06:51:42 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 06:51:42 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 06:51:42 Check angles 06:51:42 SkyScan query 06:51:43 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 06:51:43 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 06:51:43 Check angles 06:51:43 SkyScan query 06:51:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 06:51:43 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 06:51:44 Check angles 06:51:44 SkyScan query 06:51:44 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:51:44 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:51:44 Message to Master queued w/err=0: serial=3881 error=0 06:51:49 Received message from Master: op=Identify serial=3882 06:51:49 Received message from Master: op=Filter serial=3885 06:51:49 Color wheel filter change from 0 to 0 06:51:49 FLIGetFilterPos err=0 currentPosition=0 06:51:49 FLIGetStepsRemaining err=0 RemainingSteps=0 06:51:49 Filter is already there-color wheel unchanged 06:51:49 Received message from Master: op=Shutter serial=3886 06:51:49 Shutter LASER close 06:51:49 Received message from Camera: op=State serial=3888 06:51:49 GetSingleValue result=40 Value=cccccccc 06:51:49 SkyScan query 06:51:50 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:50 Parameters OK 06:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:50 Set A/D data flow result=40 06:51:50 Set A/D channel type result=40 06:51:50 Set A/D encoding result=40 06:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:50 Set channel filter=0.000000e+000 result=40 06:51:50 Config A/D Result=40 06:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:50 Get A/D filter: -9.255963e+061 result=40 06:51:50 Get A/D value=-858993460 result=40 06:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:51:50 Parameters OK 06:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:51:50 Set A/D data flow result=40 06:51:50 Set A/D channel type result=40 06:51:50 Set A/D encoding result=40 06:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:51:50 Set channel filter=0.000000e+000 result=40 06:51:50 Config A/D Result=40 06:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:51:50 Get A/D filter: -9.255963e+061 result=40 06:51:50 Get A/D value=-858993460 result=40 06:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:51:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:51:50 Aux= 06:51:50 Message to Camera, serial 3888 queued [UTC 2018-12-4 06:52:09] 06:52:21 Received message from Master: op=PointingHead serial=3895 06:52:21 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:52:21 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:52:21 Point started: ret=0 06:52:21 point_skyscan result=0 06:52:22 Check angles 06:52:22 SkyScan query 06:52:23 SkyScan query done: ret=0 az=152.985<-10199 ze=8.64<-11424 Statuses=0009 0009 06:52:23 Msec=0 True Az=152.985 Ze=8.64 Az status=0009 Ze status=0009 06:52:23 Check angles 06:52:23 SkyScan query 06:52:23 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.3<-12820 Statuses=0009 0009 06:52:23 Msec=750 True Az=135.48 Ze=-12.3 Az status=0009 Ze status=0009 06:52:23 Check angles 06:52:23 SkyScan query 06:52:24 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.255<-14217 Statuses=0009 0009 06:52:24 Msec=1500 True Az=118.02 Ze=-33.255 Az status=0009 Ze status=0009 06:52:24 Check angles 06:52:24 SkyScan query 06:52:25 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 06:52:25 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 06:52:25 Check angles 06:52:25 SkyScan query 06:52:26 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:52:26 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:52:26 Check angles 06:52:26 SkyScan query 06:52:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:52:26 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:52:26 Message to Master queued w/err=0: serial=3895 error=0 06:52:31 Received message from Master: op=Filter serial=3896 06:52:31 Color wheel filter change from 0 to 0 06:52:31 FLIGetFilterPos err=0 currentPosition=0 06:52:31 FLIGetStepsRemaining err=0 RemainingSteps=0 06:52:31 Filter is already there-color wheel unchanged 06:52:31 Received message from Master: op=Shutter serial=3897 06:52:31 Shutter LASER close 06:52:31 Received message from Camera: op=State serial=3899 06:52:31 GetSingleValue result=40 Value=cccccccc 06:52:31 SkyScan query 06:52:32 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:52:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:32 Parameters OK 06:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:32 Set A/D data flow result=40 06:52:32 Set A/D channel type result=40 06:52:32 Set A/D encoding result=40 06:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:32 Set channel filter=0.000000e+000 result=40 06:52:32 Config A/D Result=40 06:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:32 Get A/D filter: -9.255963e+061 result=40 06:52:32 Get A/D value=-858993460 result=40 06:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:52:32 Parameters OK 06:52:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:52:32 Set A/D data flow result=40 06:52:32 Set A/D channel type result=40 06:52:32 Set A/D encoding result=40 06:52:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:52:32 Set channel filter=0.000000e+000 result=40 06:52:32 Config A/D Result=40 06:52:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:52:32 Get A/D filter: -9.255963e+061 result=40 06:52:32 Get A/D value=-858993460 result=40 06:52:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:52:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:52:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:52:32 Aux= 06:52:32 Message to Camera, serial 3899 queued 06:53:03 Received message from Master: op=PointingHead serial=3906 06:53:03 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:53:03 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:53:03 Point started: ret=0 06:53:03 point_skyscan result=0 06:53:04 Check angles 06:53:04 SkyScan query 06:53:05 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.825<-17455 Statuses=0009 0009 06:53:05 Msec=0 True Az=109.395 Ze=-81.825 Az status=0009 Ze status=0009 06:53:05 Check angles 06:53:05 SkyScan query 06:53:05 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.78<-18852 Statuses=0008 0009 06:53:05 Msec=750 True Az=113.01 Ze=-102.78 Az status=0008 Ze status=0009 06:53:06 Check angles 06:53:06 SkyScan query 06:53:06 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.72<-20248 Statuses=0008 0009 06:53:06 Msec=1500 True Az=113.01 Ze=-123.72 Az status=0008 Ze status=0009 06:53:06 Check angles 06:53:06 SkyScan query 06:53:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 06:53:07 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 06:53:07 Check angles 06:53:07 SkyScan query 06:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 06:53:08 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 06:53:08 Check angles 06:53:08 SkyScan query 06:53:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:53:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:53:08 Message to Master queued w/err=0: serial=3906 error=0 06:53:13 Received message from Master: op=Filter serial=3907 06:53:13 Color wheel filter change from 0 to 0 06:53:13 FLIGetFilterPos err=0 currentPosition=0 06:53:13 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:13 Filter is already there-color wheel unchanged 06:53:14 Received message from Master: op=Shutter serial=3908 06:53:14 Shutter LASER open 06:53:14 Received message from Camera: op=State serial=3910 06:53:14 GetSingleValue result=40 Value=cccccccc 06:53:14 SkyScan query 06:53:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:53:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:14 Parameters OK 06:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:14 Set A/D data flow result=40 06:53:14 Set A/D channel type result=40 06:53:14 Set A/D encoding result=40 06:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:14 Set channel filter=0.000000e+000 result=40 06:53:14 Config A/D Result=40 06:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:14 Get A/D filter: -9.255963e+061 result=40 06:53:14 Get A/D value=-858993460 result=40 06:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:14 Parameters OK 06:53:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:14 Set A/D data flow result=40 06:53:14 Set A/D channel type result=40 06:53:14 Set A/D encoding result=40 06:53:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:14 Set channel filter=0.000000e+000 result=40 06:53:14 Config A/D Result=40 06:53:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:14 Get A/D filter: -9.255963e+061 result=40 06:53:14 Get A/D value=-858993460 result=40 06:53:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:14 Aux= 06:53:14 Message to Camera, serial 3910 queued 06:53:17 Received message from Master: op=Shutter serial=3914 06:53:17 Shutter LASER close 06:53:17 Received message from Master: op=PointingHead serial=3918 06:53:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:53:17 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:53:17 Point started: ret=0 06:53:17 point_skyscan result=0 06:53:18 Check angles 06:53:18 SkyScan query 06:53:19 SkyScan query done: ret=0 az=89.895<-5993 ze=157.26<-1516 Statuses=0009 0009 06:53:19 Msec=0 True Az=89.895 Ze=157.26 Az status=0009 Ze status=0009 06:53:19 Check angles 06:53:19 SkyScan query 06:53:20 SkyScan query done: ret=0 az=72.435<-4829 ze=136.32<-2912 Statuses=0009 0009 06:53:20 Msec=750 True Az=72.435 Ze=136.32 Az status=0009 Ze status=0009 06:53:20 Check angles 06:53:20 SkyScan query 06:53:20 SkyScan query done: ret=0 az=54.93<-3662 ze=115.35<-4310 Statuses=0009 0009 06:53:20 Msec=1500 True Az=54.93 Ze=115.35 Az status=0009 Ze status=0009 06:53:20 Check angles 06:53:20 SkyScan query 06:53:21 SkyScan query done: ret=0 az=40.845<-2723 ze=94.38<-5708 Statuses=0009 0009 06:53:21 Msec=2250 True Az=40.845 Ze=94.38 Az status=0009 Ze status=0009 06:53:21 Check angles 06:53:21 SkyScan query 06:53:22 SkyScan query done: ret=0 az=40.995<-2733 ze=73.425<-7105 Statuses=0008 0009 06:53:22 Msec=3000 True Az=40.995 Ze=73.425 Az status=0008 Ze status=0009 06:53:22 Check angles 06:53:22 SkyScan query 06:53:23 SkyScan query done: ret=0 az=40.995<-2733 ze=52.845<-8477 Statuses=0008 0009 06:53:23 Msec=3750 True Az=40.995 Ze=52.845 Az status=0008 Ze status=0009 06:53:23 Check angles 06:53:23 SkyScan query 06:53:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:53:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:53:23 Message to Master queued w/err=0: serial=3918 error=0 06:53:28 Received message from Master: op=Filter serial=3919 06:53:28 Color wheel filter change from 0 to 0 06:53:28 FLIGetFilterPos err=0 currentPosition=0 06:53:28 FLIGetStepsRemaining err=0 RemainingSteps=0 06:53:28 Filter is already there-color wheel unchanged 06:53:28 Received message from Master: op=Shutter serial=3920 06:53:28 Shutter LASER close 06:53:29 Received message from Camera: op=State serial=3922 06:53:29 GetSingleValue result=40 Value=cccccccc 06:53:29 SkyScan query 06:53:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:53:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:29 Parameters OK 06:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:29 Set A/D data flow result=40 06:53:29 Set A/D channel type result=40 06:53:29 Set A/D encoding result=40 06:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:29 Set channel filter=0.000000e+000 result=40 06:53:29 Config A/D Result=40 06:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:29 Get A/D filter: -9.255963e+061 result=40 06:53:29 Get A/D value=-858993460 result=40 06:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:53:29 Parameters OK 06:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:53:29 Set A/D data flow result=40 06:53:29 Set A/D channel type result=40 06:53:29 Set A/D encoding result=40 06:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:53:29 Set channel filter=0.000000e+000 result=40 06:53:29 Config A/D Result=40 06:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:53:29 Get A/D filter: -9.255963e+061 result=40 06:53:29 Get A/D value=-858993460 result=40 06:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:53:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:53:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:53:29 Aux= 06:53:29 Message to Camera, serial 3922 queued 06:54:00 Received message from Master: op=PointingHead serial=3929 06:54:00 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 06:54:00 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 06:54:00 Point started: ret=0 06:54:00 point_skyscan result=0 06:54:01 Check angles 06:54:01 SkyScan query 06:54:02 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 06:54:02 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 06:54:02 Check angles 06:54:02 SkyScan query 06:54:02 SkyScan query done: ret=0 az=82.215<-5481 ze=66.495<-7567 Statuses=0009 0008 06:54:02 Msec=750 True Az=82.215 Ze=66.495 Az status=0009 Ze status=0008 06:54:03 Check angles 06:54:03 SkyScan query 06:54:03 SkyScan query done: ret=0 az=99.63<-6642 ze=66.495<-7567 Statuses=0009 0008 06:54:03 Msec=1500 True Az=99.63 Ze=66.495 Az status=0009 Ze status=0008 06:54:03 Check angles 06:54:03 SkyScan query 06:54:04 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 06:54:04 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 06:54:04 Check angles 06:54:04 SkyScan query 06:54:05 SkyScan query done: ret=0 az=134.94<-8996 ze=66.495<-7567 Statuses=0009 0008 06:54:05 Msec=3000 True Az=134.94 Ze=66.495 Az status=0009 Ze status=0008 06:54:05 Check angles 06:54:05 SkyScan query 06:54:06 SkyScan query done: ret=0 az=152.58<-10172 ze=66.495<-7567 Statuses=0009 0008 06:54:06 Msec=3750 True Az=152.58 Ze=66.495 Az status=0009 Ze status=0008 06:54:06 Check angles 06:54:06 SkyScan query 06:54:06 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 06:54:06 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 06:54:06 Message to Master queued w/err=0: serial=3929 error=0 06:54:11 Received message from Master: op=Filter serial=3930 06:54:11 Color wheel filter change from 0 to 0 06:54:11 FLIGetFilterPos err=0 currentPosition=0 06:54:11 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:11 Filter is already there-color wheel unchanged 06:54:11 Received message from Master: op=Shutter serial=3931 06:54:11 Shutter LASER close 06:54:11 Received message from Camera: op=State serial=3933 06:54:11 GetSingleValue result=40 Value=cccccccc 06:54:11 SkyScan query 06:54:12 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 06:54:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:12 Parameters OK 06:54:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:12 Set A/D data flow result=40 06:54:12 Set A/D channel type result=40 06:54:12 Set A/D encoding result=40 06:54:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:12 Set channel filter=0.000000e+000 result=40 06:54:12 Config A/D Result=40 06:54:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:12 Get A/D filter: -9.255963e+061 result=40 06:54:12 Get A/D value=-858993460 result=40 06:54:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:12 Parameters OK 06:54:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:12 Set A/D data flow result=40 06:54:12 Set A/D channel type result=40 06:54:12 Set A/D encoding result=40 06:54:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:12 Set channel filter=0.000000e+000 result=40 06:54:12 Config A/D Result=40 06:54:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:12 Get A/D filter: -9.255963e+061 result=40 06:54:12 Get A/D value=-858993460 result=40 06:54:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:12 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:12 Aux= 06:54:12 Message to Camera, serial 3933 queued 06:54:43 Received message from Master: op=PointingHead serial=3940 06:54:43 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 06:54:43 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 06:54:43 Point started: ret=0 06:54:43 point_skyscan result=0 06:54:44 Check angles 06:54:44 SkyScan query 06:54:45 SkyScan query done: ret=0 az=135.18<-9012 ze=36.855<-9543 Statuses=0009 0009 06:54:45 Msec=0 True Az=135.18 Ze=36.855 Az status=0009 Ze status=0009 06:54:45 Check angles 06:54:45 SkyScan query 06:54:45 SkyScan query done: ret=0 az=117.3<-7820 ze=15.45<-10970 Statuses=0009 0009 06:54:45 Msec=750 True Az=117.3 Ze=15.45 Az status=0009 Ze status=0009 06:54:46 Check angles 06:54:46 SkyScan query 06:54:46 SkyScan query done: ret=0 az=99.48<-6632 ze=-5.955<-12397 Statuses=0009 0009 06:54:46 Msec=1500 True Az=99.48 Ze=-5.955 Az status=0009 Ze status=0009 06:54:46 Check angles 06:54:46 SkyScan query 06:54:47 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.895<-13793 Statuses=0009 0009 06:54:47 Msec=2250 True Az=82.05 Ze=-26.895 Az status=0009 Ze status=0009 06:54:47 Check angles 06:54:47 SkyScan query 06:54:48 SkyScan query done: ret=0 az=64.575<-4305 ze=-38.565<-14571 Statuses=0009 0008 06:54:48 Msec=3000 True Az=64.575 Ze=-38.565 Az status=0009 Ze status=0008 06:54:48 Check angles 06:54:48 SkyScan query 06:54:48 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.52<-14568 Statuses=0009 0008 06:54:48 Msec=3750 True Az=47.115 Ze=-38.52 Az status=0009 Ze status=0008 06:54:49 Check angles 06:54:49 SkyScan query 06:54:49 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 06:54:49 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 06:54:49 Message to Master queued w/err=0: serial=3940 error=0 06:54:54 Received message from Master: op=Filter serial=3941 06:54:54 Color wheel filter change from 0 to 0 06:54:54 FLIGetFilterPos err=0 currentPosition=0 06:54:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:54:54 Filter is already there-color wheel unchanged 06:54:54 Received message from Master: op=Shutter serial=3942 06:54:54 Shutter LASER close 06:54:54 Received message from Camera: op=State serial=3944 06:54:54 GetSingleValue result=40 Value=cccccccc 06:54:54 SkyScan query 06:54:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 06:54:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:55 Parameters OK 06:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:55 Set A/D data flow result=40 06:54:55 Set A/D channel type result=40 06:54:55 Set A/D encoding result=40 06:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:55 Set channel filter=0.000000e+000 result=40 06:54:55 Config A/D Result=40 06:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:55 Get A/D filter: -9.255963e+061 result=40 06:54:55 Get A/D value=-858993460 result=40 06:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:54:55 Parameters OK 06:54:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:54:55 Set A/D data flow result=40 06:54:55 Set A/D channel type result=40 06:54:55 Set A/D encoding result=40 06:54:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:54:55 Set channel filter=0.000000e+000 result=40 06:54:55 Config A/D Result=40 06:54:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:54:55 Get A/D filter: -9.255963e+061 result=40 06:54:55 Get A/D value=-858993460 result=40 06:54:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:54:55 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:54:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:54:55 Aux= 06:54:55 Message to Camera, serial 3944 queued 06:55:26 Received message from Master: op=PointingHead serial=3951 06:55:26 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 06:55:26 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 06:55:26 Point started: ret=0 06:55:26 point_skyscan result=0 06:55:27 Check angles 06:55:27 SkyScan query 06:55:27 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.76<-16584 Statuses=0009 0009 06:55:27 Msec=0 True Az=64.29 Ze=-68.76 Az status=0009 Ze status=0009 06:55:28 Check angles 06:55:28 SkyScan query 06:55:28 SkyScan query done: ret=0 az=81.945<-5463 ze=-89.73<-17982 Statuses=0009 0009 06:55:28 Msec=750 True Az=81.945 Ze=-89.73 Az status=0009 Ze status=0009 06:55:28 Check angles 06:55:28 SkyScan query 06:55:29 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.67<-19378 Statuses=0009 0009 06:55:29 Msec=1500 True Az=99.405 Ze=-110.67 Az status=0009 Ze status=0009 06:55:29 Check angles 06:55:29 SkyScan query 06:55:30 SkyScan query done: ret=0 az=117.165<-7811 ze=-132.06<-20804 Statuses=0009 0009 06:55:30 Msec=2250 True Az=117.165 Ze=-132.06 Az status=0009 Ze status=0009 06:55:30 Check angles 06:55:30 SkyScan query 06:55:31 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 06:55:31 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 06:55:31 Check angles 06:55:31 SkyScan query 06:55:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 06:55:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 06:55:31 Message to Master queued w/err=0: serial=3951 error=0 06:55:36 Received message from Master: op=Filter serial=3952 06:55:36 Color wheel filter change from 0 to 0 06:55:36 FLIGetFilterPos err=0 currentPosition=0 06:55:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:55:36 Filter is already there-color wheel unchanged 06:55:36 Received message from Master: op=Shutter serial=3953 06:55:36 Shutter LASER close 06:55:36 Received message from Camera: op=State serial=3955 06:55:36 GetSingleValue result=40 Value=cccccccc 06:55:36 SkyScan query 06:55:37 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 06:55:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:37 Parameters OK 06:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:37 Set A/D data flow result=40 06:55:37 Set A/D channel type result=40 06:55:37 Set A/D encoding result=40 06:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:37 Set channel filter=0.000000e+000 result=40 06:55:37 Config A/D Result=40 06:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:37 Get A/D filter: -9.255963e+061 result=40 06:55:37 Get A/D value=-858993460 result=40 06:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:55:37 Parameters OK 06:55:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:55:37 Set A/D data flow result=40 06:55:37 Set A/D channel type result=40 06:55:37 Set A/D encoding result=40 06:55:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:55:37 Set channel filter=0.000000e+000 result=40 06:55:37 Config A/D Result=40 06:55:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:55:37 Get A/D filter: -9.255963e+061 result=40 06:55:37 Get A/D value=-858993460 result=40 06:55:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:55:37 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:55:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:55:37 Aux= 06:55:37 Message to Camera, serial 3955 queued 06:56:08 Received message from Master: op=PointingHead serial=3962 06:56:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:56:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:56:08 Point started: ret=0 06:56:08 point_skyscan result=0 06:56:09 Check angles 06:56:09 SkyScan query 06:56:10 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.135<-23409 Statuses=0009 0009 06:56:10 Msec=0 True Az=113.025 Ze=-171.135 Az status=0009 Ze status=0009 06:56:10 Check angles 06:56:10 SkyScan query 06:56:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 06:56:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 06:56:10 Message to Master queued w/err=0: serial=3962 error=0 06:56:15 Received message from Master: op=Filter serial=3963 06:56:15 Color wheel filter change from 0 to 0 06:56:15 FLIGetFilterPos err=0 currentPosition=0 06:56:15 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:15 Filter is already there-color wheel unchanged 06:56:15 Received message from Master: op=Shutter serial=3964 06:56:15 Shutter LASER open 06:56:16 Received message from Camera: op=State serial=3966 06:56:16 GetSingleValue result=40 Value=cccccccc 06:56:16 SkyScan query 06:56:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:56:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:16 Parameters OK 06:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:16 Set A/D data flow result=40 06:56:16 Set A/D channel type result=40 06:56:16 Set A/D encoding result=40 06:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:16 Set channel filter=0.000000e+000 result=40 06:56:16 Config A/D Result=40 06:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:16 Get A/D filter: -9.255963e+061 result=40 06:56:16 Get A/D value=-858993460 result=40 06:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:16 Parameters OK 06:56:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:16 Set A/D data flow result=40 06:56:16 Set A/D channel type result=40 06:56:16 Set A/D encoding result=40 06:56:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:16 Set channel filter=0.000000e+000 result=40 06:56:16 Config A/D Result=40 06:56:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:16 Get A/D filter: -9.255963e+061 result=40 06:56:16 Get A/D value=-858993460 result=40 06:56:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:16 Aux= 06:56:16 Message to Camera, serial 3966 queued 06:56:19 Received message from Master: op=Shutter serial=3970 06:56:19 Shutter LASER close 06:56:19 Received message from Master: op=PointingHead serial=3974 06:56:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 06:56:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 06:56:20 Point started: ret=0 06:56:20 point_skyscan result=0 06:56:20 Check angles 06:56:20 SkyScan query 06:56:21 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.37<-21558 Statuses=0009 0009 06:56:21 Msec=0 True Az=135.84 Ze=-143.37 Az status=0009 Ze status=0009 06:56:21 Check angles 06:56:21 SkyScan query 06:56:22 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.4<-20160 Statuses=0009 0009 06:56:22 Msec=750 True Az=153.39 Ze=-122.4 Az status=0009 Ze status=0009 06:56:22 Check angles 06:56:22 SkyScan query 06:56:22 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.025<-18735 Statuses=0009 0009 06:56:22 Msec=1500 True Az=171.21 Ze=-101.025 Az status=0009 Ze status=0009 06:56:23 Check angles 06:56:23 SkyScan query 06:56:23 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 06:56:23 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 06:56:23 Check angles 06:56:23 SkyScan query 06:56:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.13<-15942 Statuses=0008 0009 06:56:24 Msec=3000 True Az=175.995 Ze=-59.13 Az status=0008 Ze status=0009 06:56:24 Check angles 06:56:24 SkyScan query 06:56:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 06:56:25 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 06:56:25 Message to Master queued w/err=0: serial=3974 error=0 06:56:30 Received message from Master: op=Filter serial=3975 06:56:30 Color wheel filter change from 0 to 0 06:56:30 FLIGetFilterPos err=0 currentPosition=0 06:56:30 FLIGetStepsRemaining err=0 RemainingSteps=0 06:56:30 Filter is already there-color wheel unchanged 06:56:30 Received message from Master: op=Shutter serial=3976 06:56:30 Shutter LASER close 06:56:30 Received message from Camera: op=State serial=3978 06:56:30 GetSingleValue result=40 Value=cccccccc 06:56:30 SkyScan query 06:56:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 06:56:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:31 Parameters OK 06:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:31 Set A/D data flow result=40 06:56:31 Set A/D channel type result=40 06:56:31 Set A/D encoding result=40 06:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:31 Set channel filter=0.000000e+000 result=40 06:56:31 Config A/D Result=40 06:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:31 Get A/D filter: -9.255963e+061 result=40 06:56:31 Get A/D value=-858993460 result=40 06:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:56:31 Parameters OK 06:56:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:56:31 Set A/D data flow result=40 06:56:31 Set A/D channel type result=40 06:56:31 Set A/D encoding result=40 06:56:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:56:31 Set channel filter=0.000000e+000 result=40 06:56:31 Config A/D Result=40 06:56:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:56:31 Get A/D filter: -9.255963e+061 result=40 06:56:31 Get A/D value=-858993460 result=40 06:56:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:56:31 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:56:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:56:31 Aux= 06:56:31 Message to Camera, serial 3978 queued 06:57:01 Received message from Master: op=PointingHead serial=3985 06:57:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 06:57:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 06:57:02 Point started: ret=0 06:57:02 point_skyscan result=0 06:57:03 Check angles 06:57:03 SkyScan query 06:57:03 SkyScan query done: ret=0 az=152.88<-10192 ze=-21.63<-13442 Statuses=0009 0009 06:57:03 Msec=0 True Az=152.88 Ze=-21.63 Az status=0009 Ze status=0009 06:57:03 Check angles 06:57:03 SkyScan query 06:57:04 SkyScan query done: ret=0 az=135.495<-9033 ze=-0.69<-12046 Statuses=0009 0009 06:57:04 Msec=750 True Az=135.495 Ze=-0.69 Az status=0009 Ze status=0009 06:57:04 Check angles 06:57:04 SkyScan query 06:57:05 SkyScan query done: ret=0 az=117.945<-7863 ze=20.295<-10647 Statuses=0009 0009 06:57:05 Msec=1500 True Az=117.945 Ze=20.295 Az status=0009 Ze status=0009 06:57:05 Check angles 06:57:05 SkyScan query 06:57:05 SkyScan query done: ret=0 az=100.545<-6703 ze=41.235<-9251 Statuses=0009 0009 06:57:05 Msec=2250 True Az=100.545 Ze=41.235 Az status=0009 Ze status=0009 06:57:06 Check angles 06:57:06 SkyScan query 06:57:06 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 06:57:06 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 06:57:06 Check angles 06:57:06 SkyScan query 06:57:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 06:57:07 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 06:57:07 Message to Master queued w/err=0: serial=3985 error=0 06:57:12 Received message from Master: op=Filter serial=3986 06:57:12 Color wheel filter change from 0 to 0 06:57:12 FLIGetFilterPos err=0 currentPosition=0 06:57:12 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:12 Filter is already there-color wheel unchanged 06:57:12 Received message from Master: op=Shutter serial=3987 06:57:12 Shutter LASER close 06:57:12 Received message from Camera: op=State serial=3989 06:57:12 GetSingleValue result=40 Value=cccccccc 06:57:12 SkyScan query 06:57:13 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 06:57:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:13 Parameters OK 06:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:13 Set A/D data flow result=40 06:57:13 Set A/D channel type result=40 06:57:13 Set A/D encoding result=40 06:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:13 Set channel filter=0.000000e+000 result=40 06:57:13 Config A/D Result=40 06:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:13 Get A/D filter: -9.255963e+061 result=40 06:57:13 Get A/D value=-858993460 result=40 06:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:13 Parameters OK 06:57:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:13 Set A/D data flow result=40 06:57:13 Set A/D channel type result=40 06:57:13 Set A/D encoding result=40 06:57:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:13 Set channel filter=0.000000e+000 result=40 06:57:13 Config A/D Result=40 06:57:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:13 Get A/D filter: -9.255963e+061 result=40 06:57:13 Get A/D value=-858993460 result=40 06:57:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:13 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:13 Aux= 06:57:13 Message to Camera, serial 3989 queued 06:57:44 Received message from Master: op=PointingHead serial=3996 06:57:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 06:57:44 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 06:57:44 Point started: ret=0 06:57:44 point_skyscan result=0 06:57:45 Check angles 06:57:45 SkyScan query 06:57:45 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 06:57:45 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 06:57:46 Check angles 06:57:46 SkyScan query 06:57:46 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 06:57:46 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 06:57:46 Check angles 06:57:46 SkyScan query 06:57:47 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 06:57:47 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 06:57:47 Check angles 06:57:47 SkyScan query 06:57:48 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 06:57:48 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 06:57:48 Check angles 06:57:48 SkyScan query 06:57:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 06:57:48 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 06:57:49 Check angles 06:57:49 SkyScan query 06:57:49 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 06:57:49 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 06:57:49 Message to Master queued w/err=0: serial=3996 error=0 06:57:54 Received message from Master: op=Filter serial=3997 06:57:54 Color wheel filter change from 0 to 0 06:57:54 FLIGetFilterPos err=0 currentPosition=0 06:57:54 FLIGetStepsRemaining err=0 RemainingSteps=0 06:57:54 Filter is already there-color wheel unchanged 06:57:54 Received message from Master: op=Shutter serial=3998 06:57:54 Shutter LASER close 06:57:54 Received message from Camera: op=State serial=4000 06:57:54 GetSingleValue result=40 Value=cccccccc 06:57:54 SkyScan query 06:57:55 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 06:57:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:55 Parameters OK 06:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:55 Set A/D data flow result=40 06:57:55 Set A/D channel type result=40 06:57:55 Set A/D encoding result=40 06:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:55 Set channel filter=0.000000e+000 result=40 06:57:55 Config A/D Result=40 06:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:55 Get A/D filter: -9.255963e+061 result=40 06:57:55 Get A/D value=-858993460 result=40 06:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:57:55 Parameters OK 06:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:57:55 Set A/D data flow result=40 06:57:55 Set A/D channel type result=40 06:57:55 Set A/D encoding result=40 06:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:57:55 Set channel filter=0.000000e+000 result=40 06:57:55 Config A/D Result=40 06:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:57:55 Get A/D filter: -9.255963e+061 result=40 06:57:55 Get A/D value=-858993460 result=40 06:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:57:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:57:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:57:55 Aux= 06:57:55 Message to Camera, serial 4000 queued 06:58:26 Received message from Master: op=PointingHead serial=4007 06:58:26 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 06:58:26 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 06:58:26 Point started: ret=0 06:58:26 point_skyscan result=0 06:58:27 Check angles 06:58:27 SkyScan query 06:58:27 SkyScan query done: ret=0 az=152.94<-10196 ze=8.58<-11428 Statuses=0009 0009 06:58:27 Msec=0 True Az=152.94 Ze=8.58 Az status=0009 Ze status=0009 06:58:28 Check angles 06:58:28 SkyScan query 06:58:28 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.36<-12824 Statuses=0009 0009 06:58:28 Msec=750 True Az=135.465 Ze=-12.36 Az status=0009 Ze status=0009 06:58:28 Check angles 06:58:28 SkyScan query 06:58:29 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.315<-14221 Statuses=0009 0009 06:58:29 Msec=1500 True Az=117.84 Ze=-33.315 Az status=0009 Ze status=0009 06:58:29 Check angles 06:58:29 SkyScan query 06:58:30 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.54<-15436 Statuses=0009 0009 06:58:30 Msec=2250 True Az=100.2 Ze=-51.54 Az status=0009 Ze status=0009 06:58:30 Check angles 06:58:30 SkyScan query 06:58:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 06:58:30 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 06:58:31 Check angles 06:58:31 SkyScan query 06:58:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:58:31 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 06:58:31 Message to Master queued w/err=0: serial=4007 error=0 06:58:36 Received message from Master: op=Filter serial=4008 06:58:36 Color wheel filter change from 0 to 0 06:58:36 FLIGetFilterPos err=0 currentPosition=0 06:58:36 FLIGetStepsRemaining err=0 RemainingSteps=0 06:58:36 Filter is already there-color wheel unchanged 06:58:36 Received message from Master: op=Shutter serial=4009 06:58:36 Shutter LASER close 06:58:36 Received message from Camera: op=State serial=4011 06:58:36 GetSingleValue result=40 Value=cccccccc 06:58:36 SkyScan query 06:58:37 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 06:58:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:37 Parameters OK 06:58:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:37 Set A/D data flow result=40 06:58:37 Set A/D channel type result=40 06:58:37 Set A/D encoding result=40 06:58:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:37 Set channel filter=0.000000e+000 result=40 06:58:37 Config A/D Result=40 06:58:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:37 Get A/D filter: -9.255963e+061 result=40 06:58:37 Get A/D value=-858993460 result=40 06:58:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:58:37 Parameters OK 06:58:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:58:37 Set A/D data flow result=40 06:58:37 Set A/D channel type result=40 06:58:37 Set A/D encoding result=40 06:58:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:58:37 Set channel filter=0.000000e+000 result=40 06:58:37 Config A/D Result=40 06:58:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:58:37 Get A/D filter: -9.255963e+061 result=40 06:58:37 Get A/D value=-858993460 result=40 06:58:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:58:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:58:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:58:37 Aux= 06:58:37 Message to Camera, serial 4011 queued 06:59:08 Received message from Master: op=PointingHead serial=4018 06:59:08 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 06:59:08 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 06:59:08 Point started: ret=0 06:59:08 point_skyscan result=0 06:59:09 Check angles 06:59:09 SkyScan query 06:59:09 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.345<-17423 Statuses=0009 0009 06:59:09 Msec=0 True Az=109.035 Ze=-81.345 Az status=0009 Ze status=0009 06:59:10 Check angles 06:59:10 SkyScan query 06:59:10 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.3<-18820 Statuses=0008 0009 06:59:10 Msec=750 True Az=113.01 Ze=-102.3 Az status=0008 Ze status=0009 06:59:10 Check angles 06:59:10 SkyScan query 06:59:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.66<-20244 Statuses=0008 0009 06:59:11 Msec=1500 True Az=112.995 Ze=-123.66 Az status=0008 Ze status=0009 06:59:11 Check angles 06:59:11 SkyScan query 06:59:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 06:59:12 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 06:59:12 Check angles 06:59:12 SkyScan query 06:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 06:59:13 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 06:59:13 Check angles 06:59:13 SkyScan query 06:59:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 06:59:13 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 06:59:13 Message to Master queued w/err=0: serial=4018 error=0 06:59:18 Received message from Master: op=Filter serial=4019 06:59:18 Color wheel filter change from 0 to 0 06:59:18 FLIGetFilterPos err=0 currentPosition=0 06:59:18 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:18 Filter is already there-color wheel unchanged 06:59:18 Received message from Master: op=Shutter serial=4020 06:59:18 Shutter LASER open 06:59:19 Received message from Camera: op=State serial=4022 06:59:19 GetSingleValue result=40 Value=cccccccc 06:59:19 SkyScan query 06:59:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 06:59:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:19 Parameters OK 06:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:19 Set A/D data flow result=40 06:59:19 Set A/D channel type result=40 06:59:19 Set A/D encoding result=40 06:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:19 Set channel filter=0.000000e+000 result=40 06:59:19 Config A/D Result=40 06:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:19 Get A/D filter: -9.255963e+061 result=40 06:59:19 Get A/D value=-858993460 result=40 06:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:19 Parameters OK 06:59:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:19 Set A/D data flow result=40 06:59:19 Set A/D channel type result=40 06:59:19 Set A/D encoding result=40 06:59:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:19 Set channel filter=0.000000e+000 result=40 06:59:19 Config A/D Result=40 06:59:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:19 Get A/D filter: -9.255963e+061 result=40 06:59:19 Get A/D value=-858993460 result=40 06:59:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:19 Aux= 06:59:19 Message to Camera, serial 4022 queued 06:59:22 Received message from Master: op=Shutter serial=4026 06:59:22 Shutter LASER close 06:59:22 Received message from Master: op=PointingHead serial=4030 06:59:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 06:59:22 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 06:59:22 Point started: ret=0 06:59:22 point_skyscan result=0 06:59:23 Check angles 06:59:23 SkyScan query 06:59:24 SkyScan query done: ret=0 az=90.255<-6017 ze=157.575<-1495 Statuses=0009 0009 06:59:24 Msec=0 True Az=90.255 Ze=157.575 Az status=0009 Ze status=0009 06:59:24 Check angles 06:59:24 SkyScan query 06:59:24 SkyScan query done: ret=0 az=72.825<-4855 ze=136.62<-2892 Statuses=0009 0009 06:59:24 Msec=750 True Az=72.825 Ze=136.62 Az status=0009 Ze status=0009 06:59:25 Check angles 06:59:25 SkyScan query 06:59:25 SkyScan query done: ret=0 az=55.2<-3680 ze=115.665<-4289 Statuses=0009 0009 06:59:25 Msec=1500 True Az=55.2 Ze=115.665 Az status=0009 Ze status=0009 06:59:25 Check angles 06:59:25 SkyScan query 06:59:26 SkyScan query done: ret=0 az=40.845<-2723 ze=94.275<-5715 Statuses=0009 0009 06:59:26 Msec=2250 True Az=40.845 Ze=94.275 Az status=0009 Ze status=0009 06:59:26 Check angles 06:59:26 SkyScan query 06:59:27 SkyScan query done: ret=0 az=41.01<-2734 ze=72.885<-7141 Statuses=0008 0009 06:59:27 Msec=3000 True Az=41.01 Ze=72.885 Az status=0008 Ze status=0009 06:59:27 Check angles 06:59:27 SkyScan query 06:59:28 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 06:59:28 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 06:59:28 Check angles 06:59:28 SkyScan query 06:59:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 06:59:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 06:59:28 Message to Master queued w/err=0: serial=4030 error=0 06:59:33 Received message from Master: op=Filter serial=4031 06:59:33 Color wheel filter change from 0 to 0 06:59:33 FLIGetFilterPos err=0 currentPosition=0 06:59:33 FLIGetStepsRemaining err=0 RemainingSteps=0 06:59:33 Filter is already there-color wheel unchanged 06:59:33 Received message from Master: op=Shutter serial=4032 06:59:33 Shutter LASER close 06:59:34 Received message from Camera: op=State serial=4034 06:59:34 GetSingleValue result=40 Value=cccccccc 06:59:34 SkyScan query 06:59:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 06:59:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:34 Parameters OK 06:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:34 Set A/D data flow result=40 06:59:34 Set A/D channel type result=40 06:59:34 Set A/D encoding result=40 06:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:34 Set channel filter=0.000000e+000 result=40 06:59:34 Config A/D Result=40 06:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:34 Get A/D filter: -9.255963e+061 result=40 06:59:34 Get A/D value=-858993460 result=40 06:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 06:59:34 Parameters OK 06:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 06:59:34 Set A/D data flow result=40 06:59:34 Set A/D channel type result=40 06:59:34 Set A/D encoding result=40 06:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 06:59:34 Set channel filter=0.000000e+000 result=40 06:59:34 Config A/D Result=40 06:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 06:59:34 Get A/D filter: -9.255963e+061 result=40 06:59:34 Get A/D value=-858993460 result=40 06:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 06:59:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 06:59:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 06:59:34 Aux= 06:59:34 Message to Camera, serial 4034 queued 07:00:05 Received message from Master: op=PointingHead serial=4041 07:00:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:00:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:00:05 Point started: ret=0 07:00:05 point_skyscan result=0 07:00:06 Check angles 07:00:06 SkyScan query 07:00:07 SkyScan query done: ret=0 az=64.41<-4294 ze=66.555<-7563 Statuses=0009 0008 07:00:07 Msec=0 True Az=64.41 Ze=66.555 Az status=0009 Ze status=0008 07:00:07 Check angles 07:00:07 SkyScan query 07:00:07 SkyScan query done: ret=0 az=82.38<-5492 ze=66.495<-7567 Statuses=0009 0008 07:00:07 Msec=750 True Az=82.38 Ze=66.495 Az status=0009 Ze status=0008 07:00:08 Check angles 07:00:08 SkyScan query 07:00:08 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 07:00:08 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 07:00:08 Check angles 07:00:08 SkyScan query 07:00:09 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 07:00:09 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 07:00:09 Check angles 07:00:09 SkyScan query 07:00:10 SkyScan query done: ret=0 az=135.15<-9010 ze=66.495<-7567 Statuses=0009 0008 07:00:10 Msec=3000 True Az=135.15 Ze=66.495 Az status=0009 Ze status=0008 07:00:10 Check angles 07:00:10 SkyScan query 07:00:11 SkyScan query done: ret=0 az=152.79<-10186 ze=66.495<-7567 Statuses=0009 0008 07:00:11 Msec=3750 True Az=152.79 Ze=66.495 Az status=0009 Ze status=0008 07:00:11 Check angles 07:00:11 SkyScan query 07:00:11 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:00:11 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:00:11 Message to Master queued w/err=0: serial=4041 error=0 07:00:16 Received message from Master: op=Filter serial=4042 07:00:16 Color wheel filter change from 0 to 0 07:00:16 FLIGetFilterPos err=0 currentPosition=0 07:00:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:16 Filter is already there-color wheel unchanged 07:00:16 Received message from Master: op=Shutter serial=4043 07:00:16 Shutter LASER close 07:00:16 Received message from Camera: op=State serial=4045 07:00:16 GetSingleValue result=40 Value=cccccccc 07:00:16 SkyScan query 07:00:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:00:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:17 Parameters OK 07:00:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:17 Set A/D data flow result=40 07:00:17 Set A/D channel type result=40 07:00:17 Set A/D encoding result=40 07:00:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:17 Set channel filter=0.000000e+000 result=40 07:00:17 Config A/D Result=40 07:00:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:17 Get A/D filter: -9.255963e+061 result=40 07:00:17 Get A/D value=-858993460 result=40 07:00:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:00:17 Parameters OK 07:00:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:00:17 Set A/D data flow result=40 07:00:17 Set A/D channel type result=40 07:00:17 Set A/D encoding result=40 07:00:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:00:17 Set channel filter=0.000000e+000 result=40 07:00:17 Config A/D Result=40 07:00:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:00:17 Get A/D filter: -9.255963e+061 result=40 07:00:17 Get A/D value=-858993460 result=40 [UTC 2018-12-4 07:00:17] 07:00:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:00:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:00:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:00:17 Aux= 07:00:17 Message to Camera, serial 4045 queued 07:00:48 Received message from Master: op=PointingHead serial=4052 07:00:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:00:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:00:48 Point started: ret=0 07:00:48 point_skyscan result=0 07:00:49 Check angles 07:00:49 SkyScan query 07:00:50 SkyScan query done: ret=0 az=134.88<-8992 ze=36.63<-9558 Statuses=0009 0009 07:00:50 Msec=0 True Az=134.88 Ze=36.63 Az status=0009 Ze status=0009 07:00:50 Check angles 07:00:50 SkyScan query 07:00:50 SkyScan query done: ret=0 az=117.48<-7832 ze=15.69<-10954 Statuses=0009 0009 07:00:50 Msec=750 True Az=117.48 Ze=15.69 Az status=0009 Ze status=0009 07:00:51 Check angles 07:00:51 SkyScan query 07:00:51 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.28<-12352 Statuses=0009 0009 07:00:51 Msec=1500 True Az=100.065 Ze=-5.28 Az status=0009 Ze status=0009 07:00:51 Check angles 07:00:51 SkyScan query 07:00:52 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.655<-13777 Statuses=0009 0009 07:00:52 Msec=2250 True Az=82.23 Ze=-26.655 Az status=0009 Ze status=0009 07:00:52 Check angles 07:00:52 SkyScan query 07:00:53 SkyScan query done: ret=0 az=64.77<-4318 ze=-38.565<-14571 Statuses=0009 0008 07:00:53 Msec=3000 True Az=64.77 Ze=-38.565 Az status=0009 Ze status=0008 07:00:53 Check angles 07:00:53 SkyScan query 07:00:53 SkyScan query done: ret=0 az=47.325<-3155 ze=-38.535<-14569 Statuses=0009 0008 07:00:53 Msec=3750 True Az=47.325 Ze=-38.535 Az status=0009 Ze status=0008 07:00:54 Check angles 07:00:54 SkyScan query 07:00:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:00:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:00:54 Message to Master queued w/err=0: serial=4052 error=0 07:00:59 Received message from Master: op=Filter serial=4053 07:00:59 Color wheel filter change from 0 to 0 07:00:59 FLIGetFilterPos err=0 currentPosition=0 07:00:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:00:59 Filter is already there-color wheel unchanged 07:00:59 Received message from Master: op=Shutter serial=4054 07:00:59 Shutter LASER close 07:00:59 Received message from Camera: op=State serial=4056 07:00:59 GetSingleValue result=40 Value=cccccccc 07:00:59 SkyScan query 07:01:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:01:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:00 Parameters OK 07:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:00 Set A/D data flow result=40 07:01:00 Set A/D channel type result=40 07:01:00 Set A/D encoding result=40 07:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:00 Set channel filter=0.000000e+000 result=40 07:01:00 Config A/D Result=40 07:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:00 Get A/D filter: -9.255963e+061 result=40 07:01:00 Get A/D value=-858993460 result=40 07:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:00 Parameters OK 07:01:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:00 Set A/D data flow result=40 07:01:00 Set A/D channel type result=40 07:01:00 Set A/D encoding result=40 07:01:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:00 Set channel filter=0.000000e+000 result=40 07:01:00 Config A/D Result=40 07:01:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:00 Get A/D filter: -9.255963e+061 result=40 07:01:00 Get A/D value=-858993460 result=40 07:01:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:00 Aux= 07:01:00 Message to Camera, serial 4056 queued 07:01:31 Received message from Master: op=PointingHead serial=4063 07:01:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:01:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:01:31 Point started: ret=0 07:01:31 point_skyscan result=0 07:01:32 Check angles 07:01:32 SkyScan query 07:01:32 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.655<-16577 Statuses=0009 0009 07:01:32 Msec=0 True Az=64.2 Ze=-68.655 Az status=0009 Ze status=0009 07:01:33 Check angles 07:01:33 SkyScan query 07:01:33 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.625<-17975 Statuses=0009 0009 07:01:33 Msec=750 True Az=81.855 Ze=-89.625 Az status=0009 Ze status=0009 07:01:33 Check angles 07:01:33 SkyScan query 07:01:34 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.58<-19372 Statuses=0009 0009 07:01:34 Msec=1500 True Az=99.33 Ze=-110.58 Az status=0009 Ze status=0009 07:01:34 Check angles 07:01:34 SkyScan query 07:01:35 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.52<-20768 Statuses=0009 0009 07:01:35 Msec=2250 True Az=116.73 Ze=-131.52 Az status=0009 Ze status=0009 07:01:35 Check angles 07:01:35 SkyScan query 07:01:35 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 07:01:35 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 07:01:36 Check angles 07:01:36 SkyScan query 07:01:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 07:01:36 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 07:01:36 Message to Master queued w/err=0: serial=4063 error=0 07:01:41 Received message from Master: op=Filter serial=4064 07:01:41 Color wheel filter change from 0 to 0 07:01:41 FLIGetFilterPos err=0 currentPosition=0 07:01:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:01:41 Filter is already there-color wheel unchanged 07:01:41 Received message from Master: op=Shutter serial=4065 07:01:41 Shutter LASER close 07:01:41 Received message from Camera: op=State serial=4067 07:01:41 GetSingleValue result=40 Value=cccccccc 07:01:41 SkyScan query 07:01:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:01:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:42 Parameters OK 07:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:42 Set A/D data flow result=40 07:01:42 Set A/D channel type result=40 07:01:42 Set A/D encoding result=40 07:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:42 Set channel filter=0.000000e+000 result=40 07:01:42 Config A/D Result=40 07:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:42 Get A/D filter: -9.255963e+061 result=40 07:01:42 Get A/D value=-858993460 result=40 07:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:01:42 Parameters OK 07:01:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:01:42 Set A/D data flow result=40 07:01:42 Set A/D channel type result=40 07:01:42 Set A/D encoding result=40 07:01:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:01:42 Set channel filter=0.000000e+000 result=40 07:01:42 Config A/D Result=40 07:01:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:01:42 Get A/D filter: -9.255963e+061 result=40 07:01:42 Get A/D value=-858993460 result=40 07:01:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:01:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:01:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:01:42 Aux= 07:01:42 Message to Camera, serial 4067 queued 07:02:13 Received message from Master: op=PointingHead serial=4074 07:02:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:02:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:02:13 Point started: ret=0 07:02:13 point_skyscan result=0 07:02:14 Check angles 07:02:14 SkyScan query 07:02:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 07:02:15 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 07:02:15 Check angles 07:02:15 SkyScan query 07:02:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:02:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:02:15 Message to Master queued w/err=0: serial=4074 error=0 07:02:20 Received message from Master: op=Filter serial=4075 07:02:20 Color wheel filter change from 0 to 0 07:02:20 FLIGetFilterPos err=0 currentPosition=0 07:02:20 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:20 Filter is already there-color wheel unchanged 07:02:20 Received message from Master: op=Shutter serial=4076 07:02:20 Shutter LASER open 07:02:21 Received message from Camera: op=State serial=4078 07:02:21 GetSingleValue result=40 Value=cccccccc 07:02:21 SkyScan query 07:02:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:02:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:21 Parameters OK 07:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:21 Set A/D data flow result=40 07:02:21 Set A/D channel type result=40 07:02:21 Set A/D encoding result=40 07:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:21 Set channel filter=0.000000e+000 result=40 07:02:21 Config A/D Result=40 07:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:21 Get A/D filter: -9.255963e+061 result=40 07:02:21 Get A/D value=-858993460 result=40 07:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:21 Parameters OK 07:02:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:21 Set A/D data flow result=40 07:02:21 Set A/D channel type result=40 07:02:21 Set A/D encoding result=40 07:02:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:21 Set channel filter=0.000000e+000 result=40 07:02:21 Config A/D Result=40 07:02:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:21 Get A/D filter: -9.255963e+061 result=40 07:02:21 Get A/D value=-858993460 result=40 07:02:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:21 Aux= 07:02:21 Message to Camera, serial 4078 queued 07:02:24 Received message from Master: op=Shutter serial=4082 07:02:24 Shutter LASER close 07:02:24 Received message from Master: op=PointingHead serial=4086 07:02:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:02:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:02:25 Point started: ret=0 07:02:25 point_skyscan result=0 07:02:25 Check angles 07:02:25 SkyScan query 07:02:26 SkyScan query done: ret=0 az=136.05<-9070 ze=-143.19<-21546 Statuses=0009 0009 07:02:26 Msec=0 True Az=136.05 Ze=-143.19 Az status=0009 Ze status=0009 07:02:26 Check angles 07:02:26 SkyScan query 07:02:27 SkyScan query done: ret=0 az=153.93<-10262 ze=-121.725<-20115 Statuses=0009 0009 07:02:27 Msec=750 True Az=153.93 Ze=-121.725 Az status=0009 Ze status=0009 07:02:27 Check angles 07:02:27 SkyScan query 07:02:28 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.83<-18722 Statuses=0009 0009 07:02:28 Msec=1500 True Az=171.42 Ze=-100.83 Az status=0009 Ze status=0009 07:02:28 Check angles 07:02:28 SkyScan query 07:02:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.875<-17325 Statuses=0008 0009 07:02:28 Msec=2250 True Az=176.025 Ze=-79.875 Az status=0008 Ze status=0009 07:02:28 Check angles 07:02:28 SkyScan query 07:02:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.455<-15897 Statuses=0008 0009 07:02:29 Msec=3000 True Az=175.995 Ze=-58.455 Az status=0008 Ze status=0009 07:02:29 Check angles 07:02:29 SkyScan query 07:02:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:02:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:02:30 Message to Master queued w/err=0: serial=4086 error=0 07:02:35 Received message from Master: op=Filter serial=4087 07:02:35 Color wheel filter change from 0 to 0 07:02:35 FLIGetFilterPos err=0 currentPosition=0 07:02:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:02:35 Filter is already there-color wheel unchanged 07:02:35 Received message from Master: op=Shutter serial=4088 07:02:35 Shutter LASER close 07:02:35 Received message from Camera: op=State serial=4090 07:02:35 GetSingleValue result=40 Value=cccccccc 07:02:35 SkyScan query 07:02:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:02:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:36 Parameters OK 07:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:36 Set A/D data flow result=40 07:02:36 Set A/D channel type result=40 07:02:36 Set A/D encoding result=40 07:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:36 Set channel filter=0.000000e+000 result=40 07:02:36 Config A/D Result=40 07:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:36 Get A/D filter: -9.255963e+061 result=40 07:02:36 Get A/D value=-858993460 result=40 07:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:02:36 Parameters OK 07:02:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:02:36 Set A/D data flow result=40 07:02:36 Set A/D channel type result=40 07:02:36 Set A/D encoding result=40 07:02:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:02:36 Set channel filter=0.000000e+000 result=40 07:02:36 Config A/D Result=40 07:02:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:02:36 Get A/D filter: -9.255963e+061 result=40 07:02:36 Get A/D value=-858993460 result=40 07:02:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:02:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:02:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:02:36 Aux= 07:02:36 Message to Camera, serial 4090 queued 07:03:07 Received message from Master: op=PointingHead serial=4097 07:03:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:03:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:03:07 Point started: ret=0 07:03:07 point_skyscan result=0 07:03:08 Check angles 07:03:08 SkyScan query 07:03:08 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.765<-13451 Statuses=0009 0009 07:03:08 Msec=0 True Az=152.955 Ze=-21.765 Az status=0009 Ze status=0009 07:03:08 Check angles 07:03:08 SkyScan query 07:03:09 SkyScan query done: ret=0 az=135.615<-9041 ze=-0.81<-12054 Statuses=0009 0009 07:03:09 Msec=750 True Az=135.615 Ze=-0.81 Az status=0009 Ze status=0009 07:03:09 Check angles 07:03:09 SkyScan query 07:03:10 SkyScan query done: ret=0 az=118.05<-7870 ze=20.16<-10656 Statuses=0009 0009 07:03:10 Msec=1500 True Az=118.05 Ze=20.16 Az status=0009 Ze status=0009 07:03:10 Check angles 07:03:10 SkyScan query 07:03:11 SkyScan query done: ret=0 az=100.635<-6709 ze=41.1<-9260 Statuses=0009 0009 07:03:11 Msec=2250 True Az=100.635 Ze=41.1 Az status=0009 Ze status=0009 07:03:11 Check angles 07:03:11 SkyScan query 07:03:11 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 07:03:11 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 07:03:11 Check angles 07:03:11 SkyScan query 07:03:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:03:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:03:12 Message to Master queued w/err=0: serial=4097 error=0 07:03:17 Received message from Master: op=Filter serial=4098 07:03:17 Color wheel filter change from 0 to 0 07:03:17 FLIGetFilterPos err=0 currentPosition=0 07:03:17 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:17 Filter is already there-color wheel unchanged 07:03:17 Received message from Master: op=Shutter serial=4099 07:03:17 Shutter LASER close 07:03:17 Received message from Camera: op=State serial=4101 07:03:17 GetSingleValue result=40 Value=cccccccc 07:03:17 SkyScan query 07:03:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:03:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:18 Parameters OK 07:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:18 Set A/D data flow result=40 07:03:18 Set A/D channel type result=40 07:03:18 Set A/D encoding result=40 07:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:18 Set channel filter=0.000000e+000 result=40 07:03:18 Config A/D Result=40 07:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:18 Get A/D filter: -9.255963e+061 result=40 07:03:18 Get A/D value=-858993460 result=40 07:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:03:18 Parameters OK 07:03:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:03:18 Set A/D data flow result=40 07:03:18 Set A/D channel type result=40 07:03:18 Set A/D encoding result=40 07:03:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:03:18 Set channel filter=0.000000e+000 result=40 07:03:18 Config A/D Result=40 07:03:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:03:18 Get A/D filter: -9.255963e+061 result=40 07:03:18 Get A/D value=-858993460 result=40 07:03:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:03:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:03:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:03:18 Aux= 07:03:18 Message to Camera, serial 4101 queued 07:03:49 Received message from Master: op=PointingHead serial=4108 07:03:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:03:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:03:49 Point started: ret=0 07:03:49 point_skyscan result=0 07:03:50 Check angles 07:03:50 SkyScan query 07:03:50 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 07:03:50 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 07:03:51 Check angles 07:03:51 SkyScan query 07:03:51 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 07:03:51 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 07:03:51 Check angles 07:03:51 SkyScan query 07:03:52 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 07:03:52 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 07:03:52 Check angles 07:03:52 SkyScan query 07:03:53 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 07:03:53 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 07:03:53 Check angles 07:03:53 SkyScan query 07:03:53 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:03:53 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:03:54 Check angles 07:03:54 SkyScan query 07:03:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:03:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:03:54 Message to Master queued w/err=0: serial=4108 error=0 07:03:59 Received message from Master: op=Filter serial=4109 07:03:59 Color wheel filter change from 0 to 0 07:03:59 FLIGetFilterPos err=0 currentPosition=0 07:03:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:03:59 Filter is already there-color wheel unchanged 07:03:59 Received message from Master: op=Shutter serial=4110 07:03:59 Shutter LASER close 07:03:59 Received message from Camera: op=State serial=4112 07:03:59 GetSingleValue result=40 Value=cccccccc 07:03:59 SkyScan query 07:04:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:04:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:00 Parameters OK 07:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:00 Set A/D data flow result=40 07:04:00 Set A/D channel type result=40 07:04:00 Set A/D encoding result=40 07:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:00 Set channel filter=0.000000e+000 result=40 07:04:00 Config A/D Result=40 07:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:00 Get A/D filter: -9.255963e+061 result=40 07:04:00 Get A/D value=-858993460 result=40 07:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:00 Parameters OK 07:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:00 Set A/D data flow result=40 07:04:00 Set A/D channel type result=40 07:04:00 Set A/D encoding result=40 07:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:00 Set channel filter=0.000000e+000 result=40 07:04:00 Config A/D Result=40 07:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:00 Get A/D filter: -9.255963e+061 result=40 07:04:00 Get A/D value=-858993460 result=40 07:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:00 Aux= 07:04:00 Message to Camera, serial 4112 queued 07:04:31 Received message from Master: op=PointingHead serial=4119 07:04:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:04:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:04:31 Point started: ret=0 07:04:31 point_skyscan result=0 07:04:32 Check angles 07:04:32 SkyScan query 07:04:32 SkyScan query done: ret=0 az=152.775<-10185 ze=8.46<-11436 Statuses=0009 0009 07:04:32 Msec=0 True Az=152.775 Ze=8.46 Az status=0009 Ze status=0009 07:04:33 Check angles 07:04:33 SkyScan query 07:04:33 SkyScan query done: ret=0 az=135.225<-9015 ze=-12.495<-12833 Statuses=0009 0009 07:04:33 Msec=750 True Az=135.225 Ze=-12.495 Az status=0009 Ze status=0009 07:04:33 Check angles 07:04:33 SkyScan query 07:04:34 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.45<-14230 Statuses=0009 0009 07:04:34 Msec=1500 True Az=117.84 Ze=-33.45 Az status=0009 Ze status=0009 07:04:34 Check angles 07:04:34 SkyScan query 07:04:35 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.54<-15436 Statuses=0009 0009 07:04:35 Msec=2250 True Az=100.035 Ze=-51.54 Az status=0009 Ze status=0009 07:04:35 Check angles 07:04:35 SkyScan query 07:04:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 07:04:36 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 07:04:36 Check angles 07:04:36 SkyScan query 07:04:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:04:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:04:36 Message to Master queued w/err=0: serial=4119 error=0 07:04:41 Received message from Master: op=Filter serial=4120 07:04:41 Color wheel filter change from 0 to 0 07:04:41 FLIGetFilterPos err=0 currentPosition=0 07:04:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:04:41 Filter is already there-color wheel unchanged 07:04:41 Received message from Master: op=Shutter serial=4121 07:04:41 Shutter LASER close 07:04:41 Received message from Camera: op=State serial=4123 07:04:41 GetSingleValue result=40 Value=cccccccc 07:04:41 SkyScan query 07:04:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:04:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:42 Parameters OK 07:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:42 Set A/D data flow result=40 07:04:42 Set A/D channel type result=40 07:04:42 Set A/D encoding result=40 07:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:42 Set channel filter=0.000000e+000 result=40 07:04:42 Config A/D Result=40 07:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:42 Get A/D filter: -9.255963e+061 result=40 07:04:42 Get A/D value=-858993460 result=40 07:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:04:42 Parameters OK 07:04:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:04:42 Set A/D data flow result=40 07:04:42 Set A/D channel type result=40 07:04:42 Set A/D encoding result=40 07:04:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:04:42 Set channel filter=0.000000e+000 result=40 07:04:42 Config A/D Result=40 07:04:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:04:42 Get A/D filter: -9.255963e+061 result=40 07:04:42 Get A/D value=-858993460 result=40 07:04:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:04:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:04:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:04:42 Aux= 07:04:42 Message to Camera, serial 4123 queued 07:05:13 Received message from Master: op=PointingHead serial=4130 07:05:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:05:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:05:13 Point started: ret=0 07:05:13 point_skyscan result=0 07:05:14 Check angles 07:05:14 SkyScan query 07:05:15 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.21<-17414 Statuses=0009 0009 07:05:15 Msec=0 True Az=109.035 Ze=-81.21 Az status=0009 Ze status=0009 07:05:15 Check angles 07:05:15 SkyScan query 07:05:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.225<-18815 Statuses=0008 0009 07:05:15 Msec=750 True Az=113.01 Ze=-102.225 Az status=0008 Ze status=0009 07:05:16 Check angles 07:05:16 SkyScan query 07:05:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 07:05:16 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 07:05:16 Check angles 07:05:16 SkyScan query 07:05:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 07:05:17 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 07:05:17 Check angles 07:05:17 SkyScan query 07:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.45<-23030 Statuses=0008 0009 07:05:18 Msec=3000 True Az=112.995 Ze=-165.45 Az status=0008 Ze status=0009 07:05:18 Check angles 07:05:18 SkyScan query 07:05:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:05:18 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:05:18 Message to Master queued w/err=0: serial=4130 error=0 07:05:23 Received message from Master: op=Filter serial=4131 07:05:23 Color wheel filter change from 0 to 0 07:05:23 FLIGetFilterPos err=0 currentPosition=0 07:05:23 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:23 Filter is already there-color wheel unchanged 07:05:24 Received message from Master: op=Shutter serial=4132 07:05:24 Shutter LASER open 07:05:24 Received message from Camera: op=State serial=4134 07:05:24 GetSingleValue result=40 Value=cccccccc 07:05:24 SkyScan query 07:05:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:05:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:24 Parameters OK 07:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:24 Set A/D data flow result=40 07:05:24 Set A/D channel type result=40 07:05:24 Set A/D encoding result=40 07:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:24 Set channel filter=0.000000e+000 result=40 07:05:24 Config A/D Result=40 07:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:24 Get A/D filter: -9.255963e+061 result=40 07:05:24 Get A/D value=-858993460 result=40 07:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:24 Parameters OK 07:05:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:24 Set A/D data flow result=40 07:05:24 Set A/D channel type result=40 07:05:24 Set A/D encoding result=40 07:05:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:24 Set channel filter=0.000000e+000 result=40 07:05:24 Config A/D Result=40 07:05:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:24 Get A/D filter: -9.255963e+061 result=40 07:05:24 Get A/D value=-858993460 result=40 07:05:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:24 Aux= 07:05:24 Message to Camera, serial 4134 queued 07:05:27 Received message from Master: op=Shutter serial=4138 07:05:27 Shutter LASER close 07:05:27 Received message from Master: op=PointingHead serial=4142 07:05:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:05:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:05:28 Point started: ret=0 07:05:28 point_skyscan result=0 07:05:28 Check angles 07:05:28 SkyScan query 07:05:29 SkyScan query done: ret=0 az=89.85<-5990 ze=157.17<-1522 Statuses=0009 0009 07:05:29 Msec=0 True Az=89.85 Ze=157.17 Az status=0009 Ze status=0009 07:05:29 Check angles 07:05:29 SkyScan query 07:05:30 SkyScan query done: ret=0 az=72.24<-4816 ze=135.78<-2948 Statuses=0009 0009 07:05:30 Msec=750 True Az=72.24 Ze=135.78 Az status=0009 Ze status=0009 07:05:30 Check angles 07:05:30 SkyScan query 07:05:30 SkyScan query done: ret=0 az=54.93<-3662 ze=115.29<-4314 Statuses=0009 0009 07:05:30 Msec=1500 True Az=54.93 Ze=115.29 Az status=0009 Ze status=0009 07:05:31 Check angles 07:05:31 SkyScan query 07:05:31 SkyScan query done: ret=0 az=40.845<-2723 ze=94.32<-5712 Statuses=0009 0009 07:05:31 Msec=2250 True Az=40.845 Ze=94.32 Az status=0009 Ze status=0009 07:05:31 Check angles 07:05:31 SkyScan query 07:05:32 SkyScan query done: ret=0 az=41.01<-2734 ze=72.915<-7139 Statuses=0008 0009 07:05:32 Msec=3000 True Az=41.01 Ze=72.915 Az status=0008 Ze status=0009 07:05:32 Check angles 07:05:32 SkyScan query 07:05:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 07:05:33 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 07:05:33 Check angles 07:05:33 SkyScan query 07:05:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:05:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:05:33 Message to Master queued w/err=0: serial=4142 error=0 07:05:38 Received message from Master: op=Filter serial=4143 07:05:38 Color wheel filter change from 0 to 0 07:05:38 FLIGetFilterPos err=0 currentPosition=0 07:05:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:05:38 Filter is already there-color wheel unchanged 07:05:39 Received message from Master: op=Shutter serial=4144 07:05:39 Shutter LASER close 07:05:39 Received message from Camera: op=State serial=4146 07:05:39 GetSingleValue result=40 Value=cccccccc 07:05:39 SkyScan query 07:05:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:05:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:39 Parameters OK 07:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:39 Set A/D data flow result=40 07:05:39 Set A/D channel type result=40 07:05:39 Set A/D encoding result=40 07:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:39 Set channel filter=0.000000e+000 result=40 07:05:39 Config A/D Result=40 07:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:39 Get A/D filter: -9.255963e+061 result=40 07:05:39 Get A/D value=-858993460 result=40 07:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:05:39 Parameters OK 07:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:05:39 Set A/D data flow result=40 07:05:39 Set A/D channel type result=40 07:05:39 Set A/D encoding result=40 07:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:05:39 Set channel filter=0.000000e+000 result=40 07:05:39 Config A/D Result=40 07:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:05:39 Get A/D filter: -9.255963e+061 result=40 07:05:39 Get A/D value=-858993460 result=40 07:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:05:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:05:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:05:39 Aux= 07:05:39 Message to Camera, serial 4146 queued 07:06:10 Received message from Master: op=PointingHead serial=4153 07:06:10 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:06:10 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:06:10 Point started: ret=0 07:06:10 point_skyscan result=0 07:06:11 Check angles 07:06:11 SkyScan query 07:06:12 SkyScan query done: ret=0 az=64.02<-4268 ze=66.54<-7564 Statuses=0009 0008 07:06:12 Msec=0 True Az=64.02 Ze=66.54 Az status=0009 Ze status=0008 07:06:12 Check angles 07:06:12 SkyScan query 07:06:13 SkyScan query done: ret=0 az=81.48<-5432 ze=66.51<-7566 Statuses=0009 0008 07:06:13 Msec=750 True Az=81.48 Ze=66.51 Az status=0009 Ze status=0008 07:06:13 Check angles 07:06:13 SkyScan query 07:06:13 SkyScan query done: ret=0 az=99.165<-6611 ze=66.495<-7567 Statuses=0009 0008 07:06:13 Msec=1500 True Az=99.165 Ze=66.495 Az status=0009 Ze status=0008 07:06:13 Check angles 07:06:13 SkyScan query 07:06:14 SkyScan query done: ret=0 az=116.535<-7769 ze=66.495<-7567 Statuses=0009 0008 07:06:14 Msec=2250 True Az=116.535 Ze=66.495 Az status=0009 Ze status=0008 07:06:14 Check angles 07:06:14 SkyScan query 07:06:15 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 07:06:15 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 07:06:15 Check angles 07:06:15 SkyScan query 07:06:16 SkyScan query done: ret=0 az=151.35<-10090 ze=66.495<-7567 Statuses=0009 0008 07:06:16 Msec=3750 True Az=151.35 Ze=66.495 Az status=0009 Ze status=0008 07:06:16 Check angles 07:06:16 SkyScan query 07:06:16 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:06:16 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:06:16 Message to Master queued w/err=0: serial=4153 error=0 07:06:21 Received message from Master: op=Filter serial=4154 07:06:21 Color wheel filter change from 0 to 0 07:06:21 FLIGetFilterPos err=0 currentPosition=0 07:06:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:06:21 Filter is already there-color wheel unchanged 07:06:21 Received message from Master: op=Shutter serial=4155 07:06:21 Shutter LASER close 07:06:22 Received message from Camera: op=State serial=4157 07:06:22 GetSingleValue result=40 Value=cccccccc 07:06:22 SkyScan query 07:06:22 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:06:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:22 Parameters OK 07:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:22 Set A/D data flow result=40 07:06:22 Set A/D channel type result=40 07:06:22 Set A/D encoding result=40 07:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:22 Set channel filter=0.000000e+000 result=40 07:06:22 Config A/D Result=40 07:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:22 Get A/D filter: -9.255963e+061 result=40 07:06:22 Get A/D value=-858993460 result=40 07:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:06:22 Parameters OK 07:06:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:06:22 Set A/D data flow result=40 07:06:22 Set A/D channel type result=40 07:06:22 Set A/D encoding result=40 07:06:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:06:22 Set channel filter=0.000000e+000 result=40 07:06:22 Config A/D Result=40 07:06:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:06:22 Get A/D filter: -9.255963e+061 result=40 07:06:22 Get A/D value=-858993460 result=40 07:06:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:06:22 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:06:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:06:22 Aux= 07:06:22 Message to Camera, serial 4157 queued 07:06:53 Received message from Master: op=PointingHead serial=4164 07:06:53 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:06:53 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:06:53 Point started: ret=0 07:06:53 point_skyscan result=0 07:06:54 Check angles 07:06:54 SkyScan query 07:06:55 SkyScan query done: ret=0 az=134.415<-8961 ze=36.18<-9588 Statuses=0009 0009 07:06:55 Msec=0 True Az=134.415 Ze=36.18 Az status=0009 Ze status=0009 07:06:55 Check angles 07:06:55 SkyScan query 07:06:55 SkyScan query done: ret=0 az=116.97<-7798 ze=15.225<-10985 Statuses=0009 0009 07:06:55 Msec=750 True Az=116.97 Ze=15.225 Az status=0009 Ze status=0009 07:06:56 Check angles 07:06:56 SkyScan query 07:06:56 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.73<-12382 Statuses=0009 0009 07:06:56 Msec=1500 True Az=99.585 Ze=-5.73 Az status=0009 Ze status=0009 07:06:56 Check angles 07:06:56 SkyScan query 07:06:57 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.685<-13779 Statuses=0009 0009 07:06:57 Msec=2250 True Az=82.08 Ze=-26.685 Az status=0009 Ze status=0009 07:06:57 Check angles 07:06:57 SkyScan query 07:06:58 SkyScan query done: ret=0 az=64.59<-4306 ze=-38.565<-14571 Statuses=0009 0008 07:06:58 Msec=3000 True Az=64.59 Ze=-38.565 Az status=0009 Ze status=0008 07:06:58 Check angles 07:06:58 SkyScan query 07:06:58 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.535<-14569 Statuses=0009 0008 07:06:58 Msec=3750 True Az=47.16 Ze=-38.535 Az status=0009 Ze status=0008 07:06:59 Check angles 07:06:59 SkyScan query 07:06:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:06:59 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:06:59 Message to Master queued w/err=0: serial=4164 error=0 07:07:04 Received message from Master: op=Filter serial=4165 07:07:04 Color wheel filter change from 0 to 0 07:07:04 FLIGetFilterPos err=0 currentPosition=0 07:07:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:04 Filter is already there-color wheel unchanged 07:07:04 Received message from Master: op=Shutter serial=4166 07:07:04 Shutter LASER close 07:07:04 Received message from Camera: op=State serial=4168 07:07:04 GetSingleValue result=40 Value=cccccccc 07:07:04 SkyScan query 07:07:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:05 Parameters OK 07:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:05 Set A/D data flow result=40 07:07:05 Set A/D channel type result=40 07:07:05 Set A/D encoding result=40 07:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:05 Set channel filter=0.000000e+000 result=40 07:07:05 Config A/D Result=40 07:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:05 Get A/D filter: -9.255963e+061 result=40 07:07:05 Get A/D value=-858993460 result=40 07:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:05 Parameters OK 07:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:05 Set A/D data flow result=40 07:07:05 Set A/D channel type result=40 07:07:05 Set A/D encoding result=40 07:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:05 Set channel filter=0.000000e+000 result=40 07:07:05 Config A/D Result=40 07:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:05 Get A/D filter: -9.255963e+061 result=40 07:07:05 Get A/D value=-858993460 result=40 07:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:05 Aux= 07:07:05 Message to Camera, serial 4168 queued 07:07:36 Received message from Master: op=PointingHead serial=4175 07:07:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:07:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:07:36 Point started: ret=0 07:07:36 point_skyscan result=0 07:07:37 Check angles 07:07:37 SkyScan query 07:07:37 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.82<-16588 Statuses=0009 0009 07:07:37 Msec=0 True Az=64.395 Ze=-68.82 Az status=0009 Ze status=0009 07:07:38 Check angles 07:07:38 SkyScan query 07:07:38 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.775<-17985 Statuses=0009 0009 07:07:38 Msec=750 True Az=81.975 Ze=-89.775 Az status=0009 Ze status=0009 07:07:38 Check angles 07:07:38 SkyScan query 07:07:39 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.165<-19411 Statuses=0009 0009 07:07:39 Msec=1500 True Az=99.765 Ze=-111.165 Az status=0009 Ze status=0009 07:07:39 Check angles 07:07:39 SkyScan query 07:07:40 SkyScan query done: ret=0 az=117.195<-7813 ze=-132.105<-20807 Statuses=0009 0009 07:07:40 Msec=2250 True Az=117.195 Ze=-132.105 Az status=0009 Ze status=0009 07:07:40 Check angles 07:07:40 SkyScan query 07:07:40 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 07:07:40 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 07:07:41 Check angles 07:07:41 SkyScan query 07:07:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:07:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:07:41 Message to Master queued w/err=0: serial=4175 error=0 07:07:46 Received message from Master: op=Filter serial=4176 07:07:46 Color wheel filter change from 0 to 0 07:07:46 FLIGetFilterPos err=0 currentPosition=0 07:07:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:07:46 Filter is already there-color wheel unchanged 07:07:46 Received message from Master: op=Shutter serial=4177 07:07:46 Shutter LASER close 07:07:46 Received message from Camera: op=State serial=4179 07:07:46 GetSingleValue result=40 Value=cccccccc 07:07:46 SkyScan query 07:07:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:07:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:47 Parameters OK 07:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:47 Set A/D data flow result=40 07:07:47 Set A/D channel type result=40 07:07:47 Set A/D encoding result=40 07:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:47 Set channel filter=0.000000e+000 result=40 07:07:47 Config A/D Result=40 07:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:47 Get A/D filter: -9.255963e+061 result=40 07:07:47 Get A/D value=-858993460 result=40 07:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:07:47 Parameters OK 07:07:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:07:47 Set A/D data flow result=40 07:07:47 Set A/D channel type result=40 07:07:47 Set A/D encoding result=40 07:07:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:07:47 Set channel filter=0.000000e+000 result=40 07:07:47 Config A/D Result=40 07:07:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:07:47 Get A/D filter: -9.255963e+061 result=40 07:07:47 Get A/D value=-858993460 result=40 07:07:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:07:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:07:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:07:47 Aux= 07:07:47 Message to Camera, serial 4179 queued 07:08:18 Received message from Master: op=PointingHead serial=4186 07:08:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:08:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:08:18 Point started: ret=0 07:08:18 point_skyscan result=0 07:08:19 Check angles 07:08:19 SkyScan query 07:08:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.075<-23405 Statuses=0009 0009 07:08:20 Msec=0 True Az=113.01 Ze=-171.075 Az status=0009 Ze status=0009 07:08:20 Check angles 07:08:20 SkyScan query 07:08:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:08:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:08:20 Message to Master queued w/err=0: serial=4186 error=0 07:08:25 Received message from Master: op=Filter serial=4187 07:08:25 Color wheel filter change from 0 to 0 07:08:25 FLIGetFilterPos err=0 currentPosition=0 07:08:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:25 Filter is already there-color wheel unchanged 07:08:26 Received message from Master: op=Shutter serial=4188 07:08:26 Shutter LASER open 07:08:26 Received message from Camera: op=State serial=4190 07:08:26 GetSingleValue result=40 Value=cccccccc 07:08:26 SkyScan query 07:08:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:08:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:26 Parameters OK 07:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:26 Set A/D data flow result=40 07:08:26 Set A/D channel type result=40 07:08:26 Set A/D encoding result=40 07:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:26 Set channel filter=0.000000e+000 result=40 07:08:26 Config A/D Result=40 07:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:26 Get A/D filter: -9.255963e+061 result=40 07:08:26 Get A/D value=-858993460 result=40 07:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:26 Parameters OK 07:08:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:26 Set A/D data flow result=40 07:08:26 Set A/D channel type result=40 07:08:26 Set A/D encoding result=40 07:08:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:26 Set channel filter=0.000000e+000 result=40 07:08:26 Config A/D Result=40 07:08:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:26 Get A/D filter: -9.255963e+061 result=40 07:08:26 Get A/D value=-858993460 result=40 07:08:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:26 Aux= 07:08:26 Message to Camera, serial 4190 queued 07:08:29 Received message from Master: op=Shutter serial=4194 07:08:29 Shutter LASER close 07:08:29 Received message from Master: op=PointingHead serial=4198 07:08:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:08:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:08:30 Point started: ret=0 07:08:30 point_skyscan result=0 07:08:30 Check angles 07:08:30 SkyScan query 07:08:31 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.265<-21551 Statuses=0009 0009 07:08:31 Msec=0 True Az=135.915 Ze=-143.265 Az status=0009 Ze status=0009 07:08:31 Check angles 07:08:31 SkyScan query 07:08:32 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.89<-20126 Statuses=0009 0009 07:08:32 Msec=750 True Az=153.78 Ze=-121.89 Az status=0009 Ze status=0009 07:08:32 Check angles 07:08:32 SkyScan query 07:08:33 SkyScan query done: ret=0 az=171.195<-11413 ze=-100.935<-18729 Statuses=0009 0009 07:08:33 Msec=1500 True Az=171.195 Ze=-100.935 Az status=0009 Ze status=0009 07:08:33 Check angles 07:08:33 SkyScan query 07:08:33 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.995<-17333 Statuses=0008 0009 07:08:33 Msec=2250 True Az=176.01 Ze=-79.995 Az status=0008 Ze status=0009 07:08:33 Check angles 07:08:33 SkyScan query 07:08:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 07:08:34 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 07:08:34 Check angles 07:08:34 SkyScan query 07:08:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:08:35 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:08:35 Message to Master queued w/err=0: serial=4198 error=0 07:08:40 Received message from Master: op=Filter serial=4199 07:08:40 Color wheel filter change from 0 to 0 07:08:40 FLIGetFilterPos err=0 currentPosition=0 07:08:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:08:40 Filter is already there-color wheel unchanged 07:08:40 Received message from Master: op=Shutter serial=4200 07:08:40 Shutter LASER close 07:08:40 Received message from Camera: op=State serial=4202 07:08:40 GetSingleValue result=40 Value=cccccccc 07:08:40 SkyScan query 07:08:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:08:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:41 Parameters OK 07:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:41 Set A/D data flow result=40 07:08:41 Set A/D channel type result=40 07:08:41 Set A/D encoding result=40 07:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:41 Set channel filter=0.000000e+000 result=40 07:08:41 Config A/D Result=40 07:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:41 Get A/D filter: -9.255963e+061 result=40 07:08:41 Get A/D value=-858993460 result=40 07:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:08:41 Parameters OK 07:08:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:08:41 Set A/D data flow result=40 07:08:41 Set A/D channel type result=40 07:08:41 Set A/D encoding result=40 07:08:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:08:41 Set channel filter=0.000000e+000 result=40 07:08:41 Config A/D Result=40 07:08:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:08:41 Get A/D filter: -9.255963e+061 result=40 07:08:41 Get A/D value=-858993460 result=40 07:08:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:08:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:08:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:08:41 Aux= 07:08:41 Message to Camera, serial 4202 queued 07:09:12 Received message from Master: op=PointingHead serial=4209 07:09:12 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:09:12 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:09:12 Point started: ret=0 07:09:12 point_skyscan result=0 07:09:13 Check angles 07:09:13 SkyScan query 07:09:13 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.675<-13445 Statuses=0009 0009 07:09:13 Msec=0 True Az=152.97 Ze=-21.675 Az status=0009 Ze status=0009 07:09:13 Check angles [UTC 2018-12-4 07:09:13] 07:09:13 SkyScan query 07:09:14 SkyScan query done: ret=0 az=133.905<-8927 ze=1.035<-11931 Statuses=0009 0009 07:09:14 Msec=750 True Az=133.905 Ze=1.035 Az status=0009 Ze status=0009 07:09:14 Check angles 07:09:14 SkyScan query 07:09:15 SkyScan query done: ret=0 az=117.585<-7839 ze=20.685<-10621 Statuses=0009 0009 07:09:15 Msec=1500 True Az=117.585 Ze=20.685 Az status=0009 Ze status=0009 07:09:15 Check angles 07:09:15 SkyScan query 07:09:16 SkyScan query done: ret=0 az=100.185<-6679 ze=41.64<-9224 Statuses=0009 0009 07:09:16 Msec=2250 True Az=100.185 Ze=41.64 Az status=0009 Ze status=0009 07:09:16 Check angles 07:09:16 SkyScan query 07:09:16 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 07:09:16 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 07:09:16 Check angles 07:09:16 SkyScan query 07:09:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:09:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:09:17 Message to Master queued w/err=0: serial=4209 error=0 07:09:22 Received message from Master: op=Filter serial=4210 07:09:22 Color wheel filter change from 0 to 0 07:09:22 FLIGetFilterPos err=0 currentPosition=0 07:09:22 FLIGetStepsRemaining err=0 RemainingSteps=0 07:09:22 Filter is already there-color wheel unchanged 07:09:22 Received message from Master: op=Shutter serial=4211 07:09:22 Shutter LASER close 07:09:22 Received message from Camera: op=State serial=4213 07:09:22 GetSingleValue result=40 Value=cccccccc 07:09:22 SkyScan query 07:09:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:09:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:23 Parameters OK 07:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:23 Set A/D data flow result=40 07:09:23 Set A/D channel type result=40 07:09:23 Set A/D encoding result=40 07:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:23 Set channel filter=0.000000e+000 result=40 07:09:23 Config A/D Result=40 07:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:23 Get A/D filter: -9.255963e+061 result=40 07:09:23 Get A/D value=-858993460 result=40 07:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:09:23 Parameters OK 07:09:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:09:23 Set A/D data flow result=40 07:09:23 Set A/D channel type result=40 07:09:23 Set A/D encoding result=40 07:09:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:09:23 Set channel filter=0.000000e+000 result=40 07:09:23 Config A/D Result=40 07:09:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:09:23 Get A/D filter: -9.255963e+061 result=40 07:09:23 Get A/D value=-858993460 result=40 07:09:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:09:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:09:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:09:23 Aux= 07:09:23 Message to Camera, serial 4213 queued 07:09:54 Received message from Master: op=PointingHead serial=4220 07:09:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:09:54 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:09:54 Point started: ret=0 07:09:54 point_skyscan result=0 07:09:55 Check angles 07:09:55 SkyScan query 07:09:55 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 07:09:55 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 07:09:56 Check angles 07:09:56 SkyScan query 07:09:56 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 07:09:56 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 07:09:56 Check angles 07:09:56 SkyScan query 07:09:57 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 07:09:57 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 07:09:57 Check angles 07:09:57 SkyScan query 07:09:58 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 07:09:58 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 07:09:58 Check angles 07:09:58 SkyScan query 07:09:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:09:58 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:09:59 Check angles 07:09:59 SkyScan query 07:09:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:09:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:09:59 Message to Master queued w/err=0: serial=4220 error=0 07:10:04 Received message from Master: op=Filter serial=4221 07:10:04 Color wheel filter change from 0 to 0 07:10:04 FLIGetFilterPos err=0 currentPosition=0 07:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:04 Filter is already there-color wheel unchanged 07:10:04 Received message from Master: op=Shutter serial=4222 07:10:04 Shutter LASER close 07:10:04 Received message from Camera: op=State serial=4224 07:10:04 GetSingleValue result=40 Value=cccccccc 07:10:04 SkyScan query 07:10:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:05 Parameters OK 07:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:05 Set A/D data flow result=40 07:10:05 Set A/D channel type result=40 07:10:05 Set A/D encoding result=40 07:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:05 Set channel filter=0.000000e+000 result=40 07:10:05 Config A/D Result=40 07:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:05 Get A/D filter: -9.255963e+061 result=40 07:10:05 Get A/D value=-858993460 result=40 07:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:05 Parameters OK 07:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:05 Set A/D data flow result=40 07:10:05 Set A/D channel type result=40 07:10:05 Set A/D encoding result=40 07:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:05 Set channel filter=0.000000e+000 result=40 07:10:05 Config A/D Result=40 07:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:05 Get A/D filter: -9.255963e+061 result=40 07:10:05 Get A/D value=-858993460 result=40 07:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:05 Aux= 07:10:05 Message to Camera, serial 4224 queued 07:10:36 Received message from Master: op=PointingHead serial=4231 07:10:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:10:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:10:36 Point started: ret=0 07:10:36 point_skyscan result=0 07:10:37 Check angles 07:10:37 SkyScan query 07:10:37 SkyScan query done: ret=0 az=152.94<-10196 ze=8.505<-11433 Statuses=0009 0009 07:10:37 Msec=0 True Az=152.94 Ze=8.505 Az status=0009 Ze status=0009 07:10:38 Check angles 07:10:38 SkyScan query 07:10:38 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.435<-12829 Statuses=0009 0009 07:10:38 Msec=750 True Az=135.465 Ze=-12.435 Az status=0009 Ze status=0009 07:10:38 Check angles 07:10:38 SkyScan query 07:10:39 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.81<-14254 Statuses=0009 0009 07:10:39 Msec=1500 True Az=117.57 Ze=-33.81 Az status=0009 Ze status=0009 07:10:39 Check angles 07:10:39 SkyScan query 07:10:40 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.54<-15436 Statuses=0009 0009 07:10:40 Msec=2250 True Az=100.2 Ze=-51.54 Az status=0009 Ze status=0009 07:10:40 Check angles 07:10:40 SkyScan query 07:10:40 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 07:10:40 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 07:10:41 Check angles 07:10:41 SkyScan query 07:10:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:10:41 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:10:41 Message to Master queued w/err=0: serial=4231 error=0 07:10:46 Received message from Master: op=Filter serial=4232 07:10:46 Color wheel filter change from 0 to 0 07:10:46 FLIGetFilterPos err=0 currentPosition=0 07:10:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:10:46 Filter is already there-color wheel unchanged 07:10:46 Received message from Master: op=Shutter serial=4233 07:10:46 Shutter LASER close 07:10:46 Received message from Camera: op=State serial=4235 07:10:46 GetSingleValue result=40 Value=cccccccc 07:10:46 SkyScan query 07:10:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:10:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:47 Parameters OK 07:10:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:47 Set A/D data flow result=40 07:10:47 Set A/D channel type result=40 07:10:47 Set A/D encoding result=40 07:10:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:47 Set channel filter=0.000000e+000 result=40 07:10:47 Config A/D Result=40 07:10:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:47 Get A/D filter: -9.255963e+061 result=40 07:10:47 Get A/D value=-858993460 result=40 07:10:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:10:47 Parameters OK 07:10:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:10:47 Set A/D data flow result=40 07:10:47 Set A/D channel type result=40 07:10:47 Set A/D encoding result=40 07:10:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:10:47 Set channel filter=0.000000e+000 result=40 07:10:47 Config A/D Result=40 07:10:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:10:47 Get A/D filter: -9.255963e+061 result=40 07:10:47 Get A/D value=-858993460 result=40 07:10:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:10:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:10:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:10:47 Aux= 07:10:47 Message to Camera, serial 4235 queued 07:11:18 Received message from Master: op=PointingHead serial=4242 07:11:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:11:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:11:18 Point started: ret=0 07:11:18 point_skyscan result=0 07:11:19 Check angles 07:11:19 SkyScan query 07:11:20 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.3<-17420 Statuses=0009 0009 07:11:20 Msec=0 True Az=109.17 Ze=-81.3 Az status=0009 Ze status=0009 07:11:20 Check angles 07:11:20 SkyScan query 07:11:20 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.285<-18819 Statuses=0008 0009 07:11:20 Msec=750 True Az=113.01 Ze=-102.285 Az status=0008 Ze status=0009 07:11:20 Check angles 07:11:20 SkyScan query 07:11:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.645<-20243 Statuses=0008 0009 07:11:21 Msec=1500 True Az=112.995 Ze=-123.645 Az status=0008 Ze status=0009 07:11:21 Check angles 07:11:21 SkyScan query 07:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 07:11:22 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 07:11:22 Check angles 07:11:22 SkyScan query 07:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.555<-23037 Statuses=0008 0009 07:11:23 Msec=3000 True Az=112.995 Ze=-165.555 Az status=0008 Ze status=0009 07:11:23 Check angles 07:11:23 SkyScan query 07:11:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:11:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:11:23 Message to Master queued w/err=0: serial=4242 error=0 07:11:28 Received message from Master: op=Filter serial=4243 07:11:28 Color wheel filter change from 0 to 0 07:11:28 FLIGetFilterPos err=0 currentPosition=0 07:11:28 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:28 Filter is already there-color wheel unchanged 07:11:28 Received message from Master: op=Shutter serial=4244 07:11:28 Shutter LASER open 07:11:29 Received message from Camera: op=State serial=4246 07:11:29 GetSingleValue result=40 Value=cccccccc 07:11:29 SkyScan query 07:11:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:11:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:29 Parameters OK 07:11:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:29 Set A/D data flow result=40 07:11:29 Set A/D channel type result=40 07:11:29 Set A/D encoding result=40 07:11:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:29 Set channel filter=0.000000e+000 result=40 07:11:29 Config A/D Result=40 07:11:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:29 Get A/D filter: -9.255963e+061 result=40 07:11:29 Get A/D value=-858993460 result=40 07:11:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:29 Parameters OK 07:11:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:29 Set A/D data flow result=40 07:11:29 Set A/D channel type result=40 07:11:29 Set A/D encoding result=40 07:11:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:29 Set channel filter=0.000000e+000 result=40 07:11:29 Config A/D Result=40 07:11:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:29 Get A/D filter: -9.255963e+061 result=40 07:11:29 Get A/D value=-858993460 result=40 07:11:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:29 Aux= 07:11:29 Message to Camera, serial 4246 queued 07:11:32 Received message from Master: op=Shutter serial=4250 07:11:32 Shutter LASER close 07:11:32 Received message from Master: op=PointingHead serial=4254 07:11:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:11:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:11:32 Point started: ret=0 07:11:32 point_skyscan result=0 07:11:33 Check angles 07:11:33 SkyScan query 07:11:34 SkyScan query done: ret=0 az=89.94<-5996 ze=157.365<-1509 Statuses=0009 0009 07:11:34 Msec=0 True Az=89.94 Ze=157.365 Az status=0009 Ze status=0009 07:11:34 Check angles 07:11:34 SkyScan query 07:11:35 SkyScan query done: ret=0 az=72.18<-4812 ze=135.96<-2936 Statuses=0009 0009 07:11:35 Msec=750 True Az=72.18 Ze=135.96 Az status=0009 Ze status=0009 07:11:35 Check angles 07:11:35 SkyScan query 07:11:35 SkyScan query done: ret=0 az=54.78<-3652 ze=115.02<-4332 Statuses=0009 0009 07:11:35 Msec=1500 True Az=54.78 Ze=115.02 Az status=0009 Ze status=0009 07:11:35 Check angles 07:11:35 SkyScan query 07:11:36 SkyScan query done: ret=0 az=40.86<-2724 ze=94.05<-5730 Statuses=0009 0009 07:11:36 Msec=2250 True Az=40.86 Ze=94.05 Az status=0009 Ze status=0009 07:11:36 Check angles 07:11:36 SkyScan query 07:11:37 SkyScan query done: ret=0 az=41.01<-2734 ze=73.095<-7127 Statuses=0008 0009 07:11:37 Msec=3000 True Az=41.01 Ze=73.095 Az status=0008 Ze status=0009 07:11:37 Check angles 07:11:37 SkyScan query 07:11:38 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 07:11:38 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 07:11:38 Check angles 07:11:38 SkyScan query 07:11:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:11:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:11:38 Message to Master queued w/err=0: serial=4254 error=0 07:11:43 Received message from Master: op=Filter serial=4255 07:11:43 Color wheel filter change from 0 to 0 07:11:43 FLIGetFilterPos err=0 currentPosition=0 07:11:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:11:43 Filter is already there-color wheel unchanged 07:11:43 Received message from Master: op=Shutter serial=4256 07:11:43 Shutter LASER close 07:11:44 Received message from Camera: op=State serial=4258 07:11:44 GetSingleValue result=40 Value=cccccccc 07:11:44 SkyScan query 07:11:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:11:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:44 Parameters OK 07:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:44 Set A/D data flow result=40 07:11:44 Set A/D channel type result=40 07:11:44 Set A/D encoding result=40 07:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:44 Set channel filter=0.000000e+000 result=40 07:11:44 Config A/D Result=40 07:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:44 Get A/D filter: -9.255963e+061 result=40 07:11:44 Get A/D value=-858993460 result=40 07:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:11:44 Parameters OK 07:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:11:44 Set A/D data flow result=40 07:11:44 Set A/D channel type result=40 07:11:44 Set A/D encoding result=40 07:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:11:44 Set channel filter=0.000000e+000 result=40 07:11:44 Config A/D Result=40 07:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:11:44 Get A/D filter: -9.255963e+061 result=40 07:11:44 Get A/D value=-858993460 result=40 07:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:11:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:11:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:11:44 Aux= 07:11:44 Message to Camera, serial 4258 queued [UTC 2018-12-4 07:12:09] 07:12:15 Received message from Master: op=PointingHead serial=4265 07:12:15 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:12:15 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:12:15 Point started: ret=0 07:12:15 point_skyscan result=0 07:12:16 Check angles 07:12:16 SkyScan query 07:12:17 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 07:12:17 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 07:12:17 Check angles 07:12:17 SkyScan query 07:12:17 SkyScan query done: ret=0 az=82.02<-5468 ze=66.495<-7567 Statuses=0009 0008 07:12:17 Msec=750 True Az=82.02 Ze=66.495 Az status=0009 Ze status=0008 07:12:18 Check angles 07:12:18 SkyScan query 07:12:18 SkyScan query done: ret=0 az=99.45<-6630 ze=66.495<-7567 Statuses=0009 0008 07:12:18 Msec=1500 True Az=99.45 Ze=66.495 Az status=0009 Ze status=0008 07:12:18 Check angles 07:12:18 SkyScan query 07:12:19 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 07:12:19 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 07:12:19 Check angles 07:12:19 SkyScan query 07:12:20 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 07:12:20 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 07:12:20 Check angles 07:12:20 SkyScan query 07:12:20 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 07:12:20 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 07:12:21 Check angles 07:12:21 SkyScan query 07:12:21 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:12:21 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:12:21 Message to Master queued w/err=0: serial=4265 error=0 07:12:26 Received message from Master: op=Filter serial=4266 07:12:26 Color wheel filter change from 0 to 0 07:12:26 FLIGetFilterPos err=0 currentPosition=0 07:12:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:12:26 Filter is already there-color wheel unchanged 07:12:26 Received message from Master: op=Shutter serial=4267 07:12:26 Shutter LASER close 07:12:26 Received message from Camera: op=State serial=4269 07:12:26 GetSingleValue result=40 Value=cccccccc 07:12:26 SkyScan query 07:12:27 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:12:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:27 Parameters OK 07:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:27 Set A/D data flow result=40 07:12:27 Set A/D channel type result=40 07:12:27 Set A/D encoding result=40 07:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:27 Set channel filter=0.000000e+000 result=40 07:12:27 Config A/D Result=40 07:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:27 Get A/D filter: -9.255963e+061 result=40 07:12:27 Get A/D value=-858993460 result=40 07:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:12:27 Parameters OK 07:12:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:12:27 Set A/D data flow result=40 07:12:27 Set A/D channel type result=40 07:12:27 Set A/D encoding result=40 07:12:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:12:27 Set channel filter=0.000000e+000 result=40 07:12:27 Config A/D Result=40 07:12:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:12:27 Get A/D filter: -9.255963e+061 result=40 07:12:27 Get A/D value=-858993460 result=40 07:12:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:12:27 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:12:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:12:27 Aux= 07:12:27 Message to Camera, serial 4269 queued 07:12:58 Received message from Master: op=PointingHead serial=4276 07:12:58 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:12:58 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:12:58 Point started: ret=0 07:12:58 point_skyscan result=0 07:12:59 Check angles 07:12:59 SkyScan query 07:13:00 SkyScan query done: ret=0 az=135.045<-9003 ze=36.915<-9539 Statuses=0009 0009 07:13:00 Msec=0 True Az=135.045 Ze=36.915 Az status=0009 Ze status=0009 07:13:00 Check angles 07:13:00 SkyScan query 07:13:00 SkyScan query done: ret=0 az=117.54<-7836 ze=15.93<-10938 Statuses=0009 0009 07:13:00 Msec=750 True Az=117.54 Ze=15.93 Az status=0009 Ze status=0009 07:13:01 Check angles 07:13:01 SkyScan query 07:13:01 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.445<-12363 Statuses=0009 0009 07:13:01 Msec=1500 True Az=99.825 Ze=-5.445 Az status=0009 Ze status=0009 07:13:01 Check angles 07:13:01 SkyScan query 07:13:02 SkyScan query done: ret=0 az=81.99<-5466 ze=-26.82<-13788 Statuses=0009 0009 07:13:02 Msec=2250 True Az=81.99 Ze=-26.82 Az status=0009 Ze status=0009 07:13:02 Check angles 07:13:02 SkyScan query 07:13:03 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 07:13:03 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 07:13:03 Check angles 07:13:03 SkyScan query 07:13:03 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.52<-14568 Statuses=0009 0008 07:13:03 Msec=3750 True Az=47.04 Ze=-38.52 Az status=0009 Ze status=0008 07:13:04 Check angles 07:13:04 SkyScan query 07:13:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:13:04 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:13:04 Message to Master queued w/err=0: serial=4276 error=0 07:13:09 Received message from Master: op=Filter serial=4277 07:13:09 Color wheel filter change from 0 to 0 07:13:09 FLIGetFilterPos err=0 currentPosition=0 07:13:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:09 Filter is already there-color wheel unchanged 07:13:09 Received message from Master: op=Shutter serial=4278 07:13:09 Shutter LASER close 07:13:09 Received message from Camera: op=State serial=4280 07:13:09 GetSingleValue result=40 Value=cccccccc 07:13:09 SkyScan query 07:13:10 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:13:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:10 Parameters OK 07:13:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:10 Set A/D data flow result=40 07:13:10 Set A/D channel type result=40 07:13:10 Set A/D encoding result=40 07:13:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:10 Set channel filter=0.000000e+000 result=40 07:13:10 Config A/D Result=40 07:13:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:10 Get A/D filter: -9.255963e+061 result=40 07:13:10 Get A/D value=-858993460 result=40 07:13:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:10 Parameters OK 07:13:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:10 Set A/D data flow result=40 07:13:10 Set A/D channel type result=40 07:13:10 Set A/D encoding result=40 07:13:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:10 Set channel filter=0.000000e+000 result=40 07:13:10 Config A/D Result=40 07:13:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:10 Get A/D filter: -9.255963e+061 result=40 07:13:10 Get A/D value=-858993460 result=40 07:13:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:10 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:10 Aux= 07:13:10 Message to Camera, serial 4280 queued 07:13:41 Received message from Master: op=PointingHead serial=4287 07:13:41 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:13:41 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:13:41 Point started: ret=0 07:13:41 point_skyscan result=0 07:13:42 Check angles 07:13:42 SkyScan query 07:13:42 SkyScan query done: ret=0 az=63.66<-4244 ze=-68.01<-16534 Statuses=0009 0009 07:13:42 Msec=0 True Az=63.66 Ze=-68.01 Az status=0009 Ze status=0009 07:13:43 Check angles 07:13:43 SkyScan query 07:13:43 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.965<-17931 Statuses=0009 0009 07:13:43 Msec=750 True Az=81.105 Ze=-88.965 Az status=0009 Ze status=0009 07:13:43 Check angles 07:13:43 SkyScan query 07:13:44 SkyScan query done: ret=0 az=98.76<-6584 ze=-109.905<-19327 Statuses=0009 0009 07:13:44 Msec=1500 True Az=98.76 Ze=-109.905 Az status=0009 Ze status=0009 07:13:44 Check angles 07:13:44 SkyScan query 07:13:45 SkyScan query done: ret=0 az=116.265<-7751 ze=-130.86<-20724 Statuses=0009 0009 07:13:45 Msec=2250 True Az=116.265 Ze=-130.86 Az status=0009 Ze status=0009 07:13:45 Check angles 07:13:45 SkyScan query 07:13:45 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.525<-21435 Statuses=0009 0008 07:13:45 Msec=3000 True Az=131.04 Ze=-141.525 Az status=0009 Ze status=0008 07:13:46 Check angles 07:13:46 SkyScan query 07:13:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:13:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:13:46 Message to Master queued w/err=0: serial=4287 error=0 07:13:51 Received message from Master: op=Filter serial=4288 07:13:51 Color wheel filter change from 0 to 0 07:13:51 FLIGetFilterPos err=0 currentPosition=0 07:13:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:13:51 Filter is already there-color wheel unchanged 07:13:51 Received message from Master: op=Shutter serial=4289 07:13:51 Shutter LASER close 07:13:51 Received message from Camera: op=State serial=4291 07:13:51 GetSingleValue result=40 Value=cccccccc 07:13:51 SkyScan query 07:13:52 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:13:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:52 Parameters OK 07:13:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:52 Set A/D data flow result=40 07:13:52 Set A/D channel type result=40 07:13:52 Set A/D encoding result=40 07:13:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:52 Set channel filter=0.000000e+000 result=40 07:13:52 Config A/D Result=40 07:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:52 Get A/D filter: -9.255963e+061 result=40 07:13:52 Get A/D value=-858993460 result=40 07:13:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:13:52 Parameters OK 07:13:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:13:52 Set A/D data flow result=40 07:13:52 Set A/D channel type result=40 07:13:52 Set A/D encoding result=40 07:13:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:13:52 Set channel filter=0.000000e+000 result=40 07:13:52 Config A/D Result=40 07:13:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:13:52 Get A/D filter: -9.255963e+061 result=40 07:13:52 Get A/D value=-858993460 result=40 07:13:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:13:52 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:13:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:13:52 Aux= 07:13:52 Message to Camera, serial 4291 queued 07:14:23 Received message from Master: op=PointingHead serial=4298 07:14:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:14:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:14:23 Point started: ret=0 07:14:23 point_skyscan result=0 07:14:24 Check angles 07:14:24 SkyScan query 07:14:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.045<-23403 Statuses=0009 0009 07:14:25 Msec=0 True Az=113.01 Ze=-171.045 Az status=0009 Ze status=0009 07:14:25 Check angles 07:14:25 SkyScan query 07:14:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:14:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:14:25 Message to Master queued w/err=0: serial=4298 error=0 07:14:30 Received message from Master: op=Filter serial=4299 07:14:30 Color wheel filter change from 0 to 0 07:14:30 FLIGetFilterPos err=0 currentPosition=0 07:14:30 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:30 Filter is already there-color wheel unchanged 07:14:30 Received message from Master: op=Shutter serial=4300 07:14:30 Shutter LASER open 07:14:31 Received message from Camera: op=State serial=4302 07:14:31 GetSingleValue result=40 Value=cccccccc 07:14:31 SkyScan query 07:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:14:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:31 Parameters OK 07:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:31 Set A/D data flow result=40 07:14:31 Set A/D channel type result=40 07:14:31 Set A/D encoding result=40 07:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:31 Set channel filter=0.000000e+000 result=40 07:14:31 Config A/D Result=40 07:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:31 Get A/D filter: -9.255963e+061 result=40 07:14:31 Get A/D value=-858993460 result=40 07:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:31 Parameters OK 07:14:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:31 Set A/D data flow result=40 07:14:31 Set A/D channel type result=40 07:14:31 Set A/D encoding result=40 07:14:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:31 Set channel filter=0.000000e+000 result=40 07:14:31 Config A/D Result=40 07:14:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:31 Get A/D filter: -9.255963e+061 result=40 07:14:31 Get A/D value=-858993460 result=40 07:14:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:31 Aux= 07:14:31 Message to Camera, serial 4302 queued 07:14:34 Received message from Master: op=Shutter serial=4306 07:14:34 Shutter LASER close 07:14:34 Received message from Master: op=PointingHead serial=4310 07:14:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:14:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:14:35 Point started: ret=0 07:14:35 point_skyscan result=0 07:14:35 Check angles 07:14:35 SkyScan query 07:14:36 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.965<-21531 Statuses=0009 0009 07:14:36 Msec=0 True Az=136.185 Ze=-142.965 Az status=0009 Ze status=0009 07:14:36 Check angles 07:14:36 SkyScan query 07:14:37 SkyScan query done: ret=0 az=153.675<-10245 ze=-122.01<-20134 Statuses=0009 0009 07:14:37 Msec=750 True Az=153.675 Ze=-122.01 Az status=0009 Ze status=0009 07:14:37 Check angles 07:14:37 SkyScan query 07:14:37 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.07<-18738 Statuses=0009 0009 07:14:37 Msec=1500 True Az=171.225 Ze=-101.07 Az status=0009 Ze status=0009 07:14:38 Check angles 07:14:38 SkyScan query 07:14:38 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 07:14:38 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 07:14:38 Check angles 07:14:38 SkyScan query 07:14:39 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.145<-15943 Statuses=0008 0009 07:14:39 Msec=3000 True Az=176.01 Ze=-59.145 Az status=0008 Ze status=0009 07:14:39 Check angles 07:14:39 SkyScan query 07:14:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:14:40 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:14:40 Message to Master queued w/err=0: serial=4310 error=0 07:14:45 Received message from Master: op=Filter serial=4311 07:14:45 Color wheel filter change from 0 to 0 07:14:45 FLIGetFilterPos err=0 currentPosition=0 07:14:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:14:45 Filter is already there-color wheel unchanged 07:14:45 Received message from Master: op=Shutter serial=4312 07:14:45 Shutter LASER close 07:14:45 Received message from Camera: op=State serial=4314 07:14:45 GetSingleValue result=40 Value=cccccccc 07:14:45 SkyScan query 07:14:46 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:14:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:46 Parameters OK 07:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:46 Set A/D data flow result=40 07:14:46 Set A/D channel type result=40 07:14:46 Set A/D encoding result=40 07:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:46 Set channel filter=0.000000e+000 result=40 07:14:46 Config A/D Result=40 07:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:46 Get A/D filter: -9.255963e+061 result=40 07:14:46 Get A/D value=-858993460 result=40 07:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:14:46 Parameters OK 07:14:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:14:46 Set A/D data flow result=40 07:14:46 Set A/D channel type result=40 07:14:46 Set A/D encoding result=40 07:14:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:14:46 Set channel filter=0.000000e+000 result=40 07:14:46 Config A/D Result=40 07:14:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:14:46 Get A/D filter: -9.255963e+061 result=40 07:14:46 Get A/D value=-858993460 result=40 07:14:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:14:46 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:14:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:14:46 Aux= 07:14:46 Message to Camera, serial 4314 queued 07:15:16 Received message from Master: op=PointingHead serial=4321 07:15:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:15:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:15:17 Point started: ret=0 07:15:17 point_skyscan result=0 07:15:18 Check angles 07:15:18 SkyScan query 07:15:18 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.345<-13423 Statuses=0009 0009 07:15:18 Msec=0 True Az=152.715 Ze=-21.345 Az status=0009 Ze status=0009 07:15:18 Check angles 07:15:18 SkyScan query 07:15:19 SkyScan query done: ret=0 az=134.79<-8986 ze=0.03<-11998 Statuses=0009 0009 07:15:19 Msec=750 True Az=134.79 Ze=0.03 Az status=0009 Ze status=0009 07:15:19 Check angles 07:15:19 SkyScan query 07:15:20 SkyScan query done: ret=0 az=117.36<-7824 ze=21<-10600 Statuses=0009 0009 07:15:20 Msec=1500 True Az=117.36 Ze=21 Az status=0009 Ze status=0009 07:15:20 Check angles 07:15:20 SkyScan query 07:15:20 SkyScan query done: ret=0 az=99.945<-6663 ze=41.955<-9203 Statuses=0009 0009 07:15:20 Msec=2250 True Az=99.945 Ze=41.955 Az status=0009 Ze status=0009 07:15:21 Check angles 07:15:21 SkyScan query 07:15:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 07:15:21 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 07:15:21 Check angles 07:15:21 SkyScan query 07:15:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:15:22 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:15:22 Message to Master queued w/err=0: serial=4321 error=0 07:15:27 Received message from Master: op=Filter serial=4322 07:15:27 Color wheel filter change from 0 to 0 07:15:27 FLIGetFilterPos err=0 currentPosition=0 07:15:27 FLIGetStepsRemaining err=0 RemainingSteps=0 07:15:27 Filter is already there-color wheel unchanged 07:15:27 Received message from Master: op=Shutter serial=4323 07:15:27 Shutter LASER close 07:15:27 Received message from Camera: op=State serial=4325 07:15:27 GetSingleValue result=40 Value=cccccccc 07:15:27 SkyScan query 07:15:28 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:15:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:28 Parameters OK 07:15:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:28 Set A/D data flow result=40 07:15:28 Set A/D channel type result=40 07:15:28 Set A/D encoding result=40 07:15:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:28 Set channel filter=0.000000e+000 result=40 07:15:28 Config A/D Result=40 07:15:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:28 Get A/D filter: -9.255963e+061 result=40 07:15:28 Get A/D value=-858993460 result=40 07:15:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:15:28 Parameters OK 07:15:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:15:28 Set A/D data flow result=40 07:15:28 Set A/D channel type result=40 07:15:28 Set A/D encoding result=40 07:15:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:15:28 Set channel filter=0.000000e+000 result=40 07:15:28 Config A/D Result=40 07:15:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:15:28 Get A/D filter: -9.255963e+061 result=40 07:15:28 Get A/D value=-858993460 result=40 07:15:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:15:28 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:15:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:15:28 Aux= 07:15:28 Message to Camera, serial 4325 queued 07:15:59 Received message from Master: op=PointingHead serial=4332 07:15:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:15:59 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:15:59 Point started: ret=0 07:15:59 point_skyscan result=0 07:16:00 Check angles 07:16:00 SkyScan query 07:16:00 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 07:16:00 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 07:16:00 Check angles 07:16:00 SkyScan query 07:16:01 SkyScan query done: ret=0 az=126.87<-8458 ze=38.505<-9433 Statuses=0009 0008 07:16:01 Msec=750 True Az=126.87 Ze=38.505 Az status=0009 Ze status=0008 07:16:01 Check angles 07:16:01 SkyScan query 07:16:02 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 07:16:02 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 07:16:02 Check angles 07:16:02 SkyScan query 07:16:02 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 07:16:02 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 07:16:03 Check angles 07:16:03 SkyScan query 07:16:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:16:03 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:16:03 Check angles 07:16:03 SkyScan query 07:16:04 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:16:04 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:16:04 Message to Master queued w/err=0: serial=4332 error=0 07:16:09 Received message from Master: op=Filter serial=4333 07:16:09 Color wheel filter change from 0 to 0 07:16:09 FLIGetFilterPos err=0 currentPosition=0 07:16:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:09 Filter is already there-color wheel unchanged 07:16:09 Received message from Master: op=Shutter serial=4334 07:16:09 Shutter LASER close 07:16:09 Received message from Camera: op=State serial=4336 07:16:09 GetSingleValue result=40 Value=cccccccc 07:16:09 SkyScan query 07:16:10 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:16:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:10 Parameters OK 07:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:10 Set A/D data flow result=40 07:16:10 Set A/D channel type result=40 07:16:10 Set A/D encoding result=40 07:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:10 Set channel filter=0.000000e+000 result=40 07:16:10 Config A/D Result=40 07:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:10 Get A/D filter: -9.255963e+061 result=40 07:16:10 Get A/D value=-858993460 result=40 07:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:10 Parameters OK 07:16:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:10 Set A/D data flow result=40 07:16:10 Set A/D channel type result=40 07:16:10 Set A/D encoding result=40 07:16:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:10 Set channel filter=0.000000e+000 result=40 07:16:10 Config A/D Result=40 07:16:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:10 Get A/D filter: -9.255963e+061 result=40 07:16:10 Get A/D value=-858993460 result=40 07:16:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:10 Aux= 07:16:10 Message to Camera, serial 4336 queued 07:16:41 Received message from Master: op=PointingHead serial=4343 07:16:41 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:16:41 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:16:41 Point started: ret=0 07:16:41 point_skyscan result=0 07:16:42 Check angles 07:16:42 SkyScan query 07:16:42 SkyScan query done: ret=0 az=152.79<-10186 ze=8.4<-11440 Statuses=0009 0009 07:16:42 Msec=0 True Az=152.79 Ze=8.4 Az status=0009 Ze status=0009 07:16:42 Check angles 07:16:42 SkyScan query 07:16:43 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.555<-12837 Statuses=0009 0009 07:16:43 Msec=750 True Az=135.345 Ze=-12.555 Az status=0009 Ze status=0009 07:16:43 Check angles 07:16:43 SkyScan query 07:16:44 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.48<-14232 Statuses=0009 0009 07:16:44 Msec=1500 True Az=117.81 Ze=-33.48 Az status=0009 Ze status=0009 07:16:44 Check angles 07:16:44 SkyScan query 07:16:45 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 07:16:45 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 07:16:45 Check angles 07:16:45 SkyScan query 07:16:45 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:16:45 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:16:45 Check angles 07:16:45 SkyScan query 07:16:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:16:46 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:16:46 Message to Master queued w/err=0: serial=4343 error=0 07:16:51 Received message from Master: op=Filter serial=4344 07:16:51 Color wheel filter change from 0 to 0 07:16:51 FLIGetFilterPos err=0 currentPosition=0 07:16:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:16:51 Filter is already there-color wheel unchanged 07:16:51 Received message from Master: op=Shutter serial=4345 07:16:51 Shutter LASER close 07:16:51 Received message from Camera: op=State serial=4347 07:16:51 GetSingleValue result=40 Value=cccccccc 07:16:51 SkyScan query 07:16:52 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:16:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:52 Parameters OK 07:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:52 Set A/D data flow result=40 07:16:52 Set A/D channel type result=40 07:16:52 Set A/D encoding result=40 07:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:52 Set channel filter=0.000000e+000 result=40 07:16:52 Config A/D Result=40 07:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:52 Get A/D filter: -9.255963e+061 result=40 07:16:52 Get A/D value=-858993460 result=40 07:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:16:52 Parameters OK 07:16:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:16:52 Set A/D data flow result=40 07:16:52 Set A/D channel type result=40 07:16:52 Set A/D encoding result=40 07:16:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:16:52 Set channel filter=0.000000e+000 result=40 07:16:52 Config A/D Result=40 07:16:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:16:52 Get A/D filter: -9.255963e+061 result=40 07:16:52 Get A/D value=-858993460 result=40 07:16:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:16:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:16:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:16:52 Aux= 07:16:52 Message to Camera, serial 4347 queued 07:17:23 Received message from Master: op=PointingHead serial=4354 07:17:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:17:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:17:23 Point started: ret=0 07:17:23 point_skyscan result=0 07:17:24 Check angles 07:17:24 SkyScan query 07:17:24 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.18<-17412 Statuses=0009 0009 07:17:24 Msec=0 True Az=108.99 Ze=-81.18 Az status=0009 Ze status=0009 07:17:25 Check angles 07:17:25 SkyScan query 07:17:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.135<-18809 Statuses=0008 0009 07:17:25 Msec=750 True Az=113.01 Ze=-102.135 Az status=0008 Ze status=0009 07:17:25 Check angles 07:17:25 SkyScan query 07:17:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.495<-20233 Statuses=0008 0009 07:17:26 Msec=1500 True Az=113.01 Ze=-123.495 Az status=0008 Ze status=0009 07:17:26 Check angles 07:17:26 SkyScan query 07:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.48<-21632 Statuses=0008 0009 07:17:27 Msec=2250 True Az=112.995 Ze=-144.48 Az status=0008 Ze status=0009 07:17:27 Check angles 07:17:27 SkyScan query 07:17:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 07:17:27 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 07:17:28 Check angles 07:17:28 SkyScan query 07:17:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:17:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:17:28 Message to Master queued w/err=0: serial=4354 error=0 07:17:33 Received message from Master: op=Filter serial=4355 07:17:33 Color wheel filter change from 0 to 0 07:17:33 FLIGetFilterPos err=0 currentPosition=0 07:17:33 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:33 Filter is already there-color wheel unchanged 07:17:33 Received message from Master: op=Shutter serial=4356 07:17:33 Shutter LASER open 07:17:34 Received message from Camera: op=State serial=4358 07:17:34 GetSingleValue result=40 Value=cccccccc 07:17:34 SkyScan query 07:17:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:17:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:34 Parameters OK 07:17:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:34 Set A/D data flow result=40 07:17:34 Set A/D channel type result=40 07:17:34 Set A/D encoding result=40 07:17:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:34 Set channel filter=0.000000e+000 result=40 07:17:34 Config A/D Result=40 07:17:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:34 Get A/D filter: -9.255963e+061 result=40 07:17:34 Get A/D value=-858993460 result=40 07:17:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:34 Parameters OK 07:17:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:34 Set A/D data flow result=40 07:17:34 Set A/D channel type result=40 07:17:34 Set A/D encoding result=40 07:17:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:34 Set channel filter=0.000000e+000 result=40 07:17:34 Config A/D Result=40 07:17:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:34 Get A/D filter: -9.255963e+061 result=40 07:17:34 Get A/D value=-858993460 result=40 07:17:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:34 Aux= 07:17:34 Message to Camera, serial 4358 queued 07:17:37 Received message from Master: op=Shutter serial=4362 07:17:37 Shutter LASER close 07:17:37 Received message from Master: op=PointingHead serial=4366 07:17:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:17:37 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:17:37 Point started: ret=0 07:17:37 point_skyscan result=0 07:17:38 Check angles 07:17:38 SkyScan query 07:17:39 SkyScan query done: ret=0 az=89.46<-5964 ze=156.795<-1547 Statuses=0009 0009 07:17:39 Msec=0 True Az=89.46 Ze=156.795 Az status=0009 Ze status=0009 07:17:39 Check angles 07:17:39 SkyScan query 07:17:39 SkyScan query done: ret=0 az=72<-4800 ze=135.825<-2945 Statuses=0009 0009 07:17:39 Msec=750 True Az=72 Ze=135.825 Az status=0009 Ze status=0009 07:17:40 Check angles 07:17:40 SkyScan query 07:17:40 SkyScan query done: ret=0 az=54.645<-3643 ze=114.885<-4341 Statuses=0009 0009 07:17:40 Msec=1500 True Az=54.645 Ze=114.885 Az status=0009 Ze status=0009 07:17:40 Check angles 07:17:40 SkyScan query 07:17:41 SkyScan query done: ret=0 az=40.875<-2725 ze=93.915<-5739 Statuses=0009 0009 07:17:41 Msec=2250 True Az=40.875 Ze=93.915 Az status=0009 Ze status=0009 07:17:41 Check angles 07:17:41 SkyScan query 07:17:42 SkyScan query done: ret=0 az=40.995<-2733 ze=72.96<-7136 Statuses=0008 0009 07:17:42 Msec=3000 True Az=40.995 Ze=72.96 Az status=0008 Ze status=0009 07:17:42 Check angles 07:17:42 SkyScan query 07:17:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 07:17:42 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 07:17:43 Check angles 07:17:43 SkyScan query 07:17:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:17:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:17:43 Message to Master queued w/err=0: serial=4366 error=0 07:17:48 Received message from Master: op=Filter serial=4367 07:17:48 Color wheel filter change from 0 to 0 07:17:48 FLIGetFilterPos err=0 currentPosition=0 07:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:17:48 Filter is already there-color wheel unchanged 07:17:48 Received message from Master: op=Shutter serial=4368 07:17:48 Shutter LASER close 07:17:49 Received message from Camera: op=State serial=4370 07:17:49 GetSingleValue result=40 Value=cccccccc 07:17:49 SkyScan query 07:17:49 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:49 Parameters OK 07:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:49 Set A/D data flow result=40 07:17:49 Set A/D channel type result=40 07:17:49 Set A/D encoding result=40 07:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:49 Set channel filter=0.000000e+000 result=40 07:17:49 Config A/D Result=40 07:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:49 Get A/D filter: -9.255963e+061 result=40 07:17:49 Get A/D value=-858993460 result=40 07:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:17:49 Parameters OK 07:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:17:49 Set A/D data flow result=40 07:17:49 Set A/D channel type result=40 07:17:49 Set A/D encoding result=40 07:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:17:49 Set channel filter=0.000000e+000 result=40 07:17:49 Config A/D Result=40 07:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:17:49 Get A/D filter: -9.255963e+061 result=40 07:17:49 Get A/D value=-858993460 result=40 07:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:17:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:17:49 Aux= 07:17:49 Message to Camera, serial 4370 queued 07:18:20 Received message from Master: op=PointingHead serial=4377 07:18:20 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:18:20 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:18:20 Point started: ret=0 07:18:20 point_skyscan result=0 07:18:21 Check angles 07:18:21 SkyScan query 07:18:22 SkyScan query done: ret=0 az=64.215<-4281 ze=66.54<-7564 Statuses=0009 0008 07:18:22 Msec=0 True Az=64.215 Ze=66.54 Az status=0009 Ze status=0008 07:18:22 Check angles 07:18:22 SkyScan query 07:18:22 SkyScan query done: ret=0 az=81.75<-5450 ze=66.51<-7566 Statuses=0009 0008 07:18:22 Msec=750 True Az=81.75 Ze=66.51 Az status=0009 Ze status=0008 07:18:23 Check angles 07:18:23 SkyScan query 07:18:23 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 07:18:23 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 07:18:23 Check angles 07:18:23 SkyScan query 07:18:24 SkyScan query done: ret=0 az=116.61<-7774 ze=66.495<-7567 Statuses=0009 0008 07:18:24 Msec=2250 True Az=116.61 Ze=66.495 Az status=0009 Ze status=0008 07:18:24 Check angles 07:18:24 SkyScan query 07:18:25 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 07:18:25 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 07:18:25 Check angles 07:18:25 SkyScan query 07:18:25 SkyScan query done: ret=0 az=151.515<-10101 ze=66.495<-7567 Statuses=0009 0008 07:18:25 Msec=3750 True Az=151.515 Ze=66.495 Az status=0009 Ze status=0008 07:18:26 Check angles 07:18:26 SkyScan query 07:18:26 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:18:26 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:18:26 Message to Master queued w/err=0: serial=4377 error=0 07:18:31 Received message from Master: op=Filter serial=4378 07:18:31 Color wheel filter change from 0 to 0 07:18:31 FLIGetFilterPos err=0 currentPosition=0 07:18:31 FLIGetStepsRemaining err=0 RemainingSteps=0 07:18:31 Filter is already there-color wheel unchanged 07:18:31 Received message from Master: op=Shutter serial=4379 07:18:31 Shutter LASER close 07:18:31 Received message from Camera: op=State serial=4381 07:18:31 GetSingleValue result=40 Value=cccccccc 07:18:31 SkyScan query 07:18:32 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:18:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:32 Parameters OK 07:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:32 Set A/D data flow result=40 07:18:32 Set A/D channel type result=40 07:18:32 Set A/D encoding result=40 07:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:32 Set channel filter=0.000000e+000 result=40 07:18:32 Config A/D Result=40 07:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:32 Get A/D filter: -9.255963e+061 result=40 07:18:32 Get A/D value=-858993460 result=40 07:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:18:32 Parameters OK 07:18:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:18:32 Set A/D data flow result=40 07:18:32 Set A/D channel type result=40 07:18:32 Set A/D encoding result=40 07:18:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:18:32 Set channel filter=0.000000e+000 result=40 07:18:32 Config A/D Result=40 07:18:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:18:32 Get A/D filter: -9.255963e+061 result=40 07:18:32 Get A/D value=-858993460 result=40 07:18:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:18:32 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:18:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:18:32 Aux= 07:18:32 Message to Camera, serial 4381 queued 07:19:03 Received message from Master: op=PointingHead serial=4388 07:19:03 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:19:03 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:19:03 Point started: ret=0 07:19:03 point_skyscan result=0 07:19:04 Check angles 07:19:04 SkyScan query 07:19:05 SkyScan query done: ret=0 az=134.88<-8992 ze=36.6<-9560 Statuses=0009 0009 07:19:05 Msec=0 True Az=134.88 Ze=36.6 Az status=0009 Ze status=0009 07:19:05 Check angles 07:19:05 SkyScan query 07:19:05 SkyScan query done: ret=0 az=117.45<-7830 ze=15.66<-10956 Statuses=0009 0009 07:19:05 Msec=750 True Az=117.45 Ze=15.66 Az status=0009 Ze status=0009 07:19:05 Check angles 07:19:05 SkyScan query 07:19:06 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.325<-12355 Statuses=0009 0009 07:19:06 Msec=1500 True Az=100.065 Ze=-5.325 Az status=0009 Ze status=0009 07:19:06 Check angles 07:19:06 SkyScan query 07:19:07 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.28<-13752 Statuses=0009 0009 07:19:07 Msec=2250 True Az=82.5 Ze=-26.28 Az status=0009 Ze status=0009 07:19:07 Check angles 07:19:07 SkyScan query 07:19:08 SkyScan query done: ret=0 az=64.98<-4332 ze=-38.565<-14571 Statuses=0009 0008 07:19:08 Msec=3000 True Az=64.98 Ze=-38.565 Az status=0009 Ze status=0008 07:19:08 Check angles 07:19:08 SkyScan query 07:19:08 SkyScan query done: ret=0 az=47.58<-3172 ze=-38.535<-14569 Statuses=0009 0008 07:19:08 Msec=3750 True Az=47.58 Ze=-38.535 Az status=0009 Ze status=0008 07:19:08 Check angles 07:19:08 SkyScan query 07:19:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:19:09 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:19:09 Message to Master queued w/err=0: serial=4388 error=0 07:19:14 Received message from Master: op=Filter serial=4389 07:19:14 Color wheel filter change from 0 to 0 07:19:14 FLIGetFilterPos err=0 currentPosition=0 07:19:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:14 Filter is already there-color wheel unchanged 07:19:14 Received message from Master: op=Shutter serial=4390 07:19:14 Shutter LASER close 07:19:14 Received message from Camera: op=State serial=4392 07:19:14 GetSingleValue result=40 Value=cccccccc 07:19:14 SkyScan query 07:19:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:19:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:15 Parameters OK 07:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:15 Set A/D data flow result=40 07:19:15 Set A/D channel type result=40 07:19:15 Set A/D encoding result=40 07:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:15 Set channel filter=0.000000e+000 result=40 07:19:15 Config A/D Result=40 07:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:15 Get A/D filter: -9.255963e+061 result=40 07:19:15 Get A/D value=-858993460 result=40 07:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:15 Parameters OK 07:19:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:15 Set A/D data flow result=40 07:19:15 Set A/D channel type result=40 07:19:15 Set A/D encoding result=40 07:19:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:15 Set channel filter=0.000000e+000 result=40 07:19:15 Config A/D Result=40 07:19:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:15 Get A/D filter: -9.255963e+061 result=40 07:19:15 Get A/D value=-858993460 result=40 07:19:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:15 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:15 Aux= 07:19:15 Message to Camera, serial 4392 queued 07:19:46 Received message from Master: op=PointingHead serial=4399 07:19:46 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:19:46 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:19:46 Point started: ret=0 07:19:46 point_skyscan result=0 07:19:47 Check angles 07:19:47 SkyScan query 07:19:47 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.325<-16555 Statuses=0009 0009 07:19:47 Msec=0 True Az=63.975 Ze=-68.325 Az status=0009 Ze status=0009 07:19:48 Check angles 07:19:48 SkyScan query 07:19:48 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.715<-17981 Statuses=0009 0009 07:19:48 Msec=750 True Az=81.885 Ze=-89.715 Az status=0009 Ze status=0009 07:19:48 Check angles 07:19:48 SkyScan query 07:19:49 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.655<-19377 Statuses=0009 0009 07:19:49 Msec=1500 True Az=99.375 Ze=-110.655 Az status=0009 Ze status=0009 07:19:49 Check angles 07:19:49 SkyScan query 07:19:50 SkyScan query done: ret=0 az=117.15<-7810 ze=-132.045<-20803 Statuses=0009 0009 07:19:50 Msec=2250 True Az=117.15 Ze=-132.045 Az status=0009 Ze status=0009 07:19:50 Check angles 07:19:50 SkyScan query 07:19:50 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 07:19:50 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 07:19:51 Check angles 07:19:51 SkyScan query 07:19:51 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:19:51 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:19:51 Message to Master queued w/err=0: serial=4399 error=0 07:19:56 Received message from Master: op=Filter serial=4400 07:19:56 Color wheel filter change from 0 to 0 07:19:56 FLIGetFilterPos err=0 currentPosition=0 07:19:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:19:56 Filter is already there-color wheel unchanged 07:19:56 Received message from Master: op=Shutter serial=4401 07:19:56 Shutter LASER close 07:19:56 Received message from Camera: op=State serial=4403 07:19:56 GetSingleValue result=40 Value=cccccccc 07:19:56 SkyScan query 07:19:57 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:19:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:57 Parameters OK 07:19:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:57 Set A/D data flow result=40 07:19:57 Set A/D channel type result=40 07:19:57 Set A/D encoding result=40 07:19:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:57 Set channel filter=0.000000e+000 result=40 07:19:57 Config A/D Result=40 07:19:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:57 Get A/D filter: -9.255963e+061 result=40 07:19:57 Get A/D value=-858993460 result=40 07:19:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:19:57 Parameters OK 07:19:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:19:57 Set A/D data flow result=40 07:19:57 Set A/D channel type result=40 07:19:57 Set A/D encoding result=40 07:19:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:19:57 Set channel filter=0.000000e+000 result=40 07:19:57 Config A/D Result=40 07:19:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:19:57 Get A/D filter: -9.255963e+061 result=40 07:19:57 Get A/D value=-858993460 result=40 07:19:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:19:57 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:19:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:19:57 Aux= 07:19:57 Message to Camera, serial 4403 queued 07:20:28 Received message from Master: op=PointingHead serial=4410 07:20:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:20:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:20:28 Point started: ret=0 07:20:28 point_skyscan result=0 07:20:29 Check angles 07:20:29 SkyScan query 07:20:29 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.105<-23407 Statuses=0009 0009 07:20:29 Msec=0 True Az=113.025 Ze=-171.105 Az status=0009 Ze status=0009 07:20:30 Check angles 07:20:30 SkyScan query 07:20:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:20:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:20:30 Message to Master queued w/err=0: serial=4410 error=0 07:20:35 Received message from Master: op=Filter serial=4411 07:20:35 Color wheel filter change from 0 to 0 07:20:35 FLIGetFilterPos err=0 currentPosition=0 07:20:35 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:35 Filter is already there-color wheel unchanged 07:20:35 Received message from Master: op=Shutter serial=4412 07:20:35 Shutter LASER open 07:20:35 Received message from Camera: op=State serial=4414 07:20:35 GetSingleValue result=40 Value=cccccccc 07:20:35 SkyScan query 07:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:20:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:36 Parameters OK 07:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:36 Set A/D data flow result=40 07:20:36 Set A/D channel type result=40 07:20:36 Set A/D encoding result=40 07:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:36 Set channel filter=0.000000e+000 result=40 07:20:36 Config A/D Result=40 07:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:36 Get A/D filter: -9.255963e+061 result=40 07:20:36 Get A/D value=-858993460 result=40 07:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:36 Parameters OK 07:20:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:36 Set A/D data flow result=40 07:20:36 Set A/D channel type result=40 07:20:36 Set A/D encoding result=40 07:20:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:36 Set channel filter=0.000000e+000 result=40 07:20:36 Config A/D Result=40 07:20:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:36 Get A/D filter: -9.255963e+061 result=40 07:20:36 Get A/D value=-858993460 result=40 07:20:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:36 Aux= 07:20:36 Message to Camera, serial 4414 queued 07:20:38 Received message from Master: op=Shutter serial=4418 07:20:38 Shutter LASER close 07:20:39 Received message from Master: op=PointingHead serial=4422 07:20:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:20:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:20:39 Point started: ret=0 07:20:39 point_skyscan result=0 07:20:40 Check angles 07:20:40 SkyScan query 07:20:41 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.34<-21556 Statuses=0009 0009 07:20:41 Msec=0 True Az=135.78 Ze=-143.34 Az status=0009 Ze status=0009 07:20:41 Check angles 07:20:41 SkyScan query [UTC 2018-12-4 07:20:42] 07:20:42 SkyScan query done: ret=0 az=153.375<-10225 ze=-122.385<-20159 Statuses=0009 0009 07:20:42 Msec=750 True Az=153.375 Ze=-122.385 Az status=0009 Ze status=0009 07:20:42 Check angles 07:20:42 SkyScan query 07:20:42 SkyScan query done: ret=0 az=170.745<-11383 ze=-101.445<-18763 Statuses=0009 0009 07:20:42 Msec=1500 True Az=170.745 Ze=-101.445 Az status=0009 Ze status=0009 07:20:42 Check angles 07:20:42 SkyScan query 07:20:43 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.49<-17366 Statuses=0008 0009 07:20:43 Msec=2250 True Az=176.025 Ze=-80.49 Az status=0008 Ze status=0009 07:20:43 Check angles 07:20:43 SkyScan query 07:20:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.52<-15968 Statuses=0008 0009 07:20:44 Msec=3000 True Az=175.995 Ze=-59.52 Az status=0008 Ze status=0009 07:20:44 Check angles 07:20:44 SkyScan query 07:20:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:20:45 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:20:45 Message to Master queued w/err=0: serial=4422 error=0 07:20:50 Received message from Master: op=Filter serial=4423 07:20:50 Color wheel filter change from 0 to 0 07:20:50 FLIGetFilterPos err=0 currentPosition=0 07:20:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:20:50 Filter is already there-color wheel unchanged 07:20:50 Received message from Master: op=Shutter serial=4424 07:20:50 Shutter LASER close 07:20:50 Received message from Camera: op=State serial=4426 07:20:50 GetSingleValue result=40 Value=cccccccc 07:20:50 SkyScan query 07:20:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:20:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:50 Parameters OK 07:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:50 Set A/D data flow result=40 07:20:50 Set A/D channel type result=40 07:20:50 Set A/D encoding result=40 07:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:50 Set channel filter=0.000000e+000 result=40 07:20:50 Config A/D Result=40 07:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:50 Get A/D filter: -9.255963e+061 result=40 07:20:50 Get A/D value=-858993460 result=40 07:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:20:50 Parameters OK 07:20:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:20:50 Set A/D data flow result=40 07:20:50 Set A/D channel type result=40 07:20:50 Set A/D encoding result=40 07:20:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:20:50 Set channel filter=0.000000e+000 result=40 07:20:50 Config A/D Result=40 07:20:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:20:50 Get A/D filter: -9.255963e+061 result=40 07:20:50 Get A/D value=-858993460 result=40 07:20:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:20:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:20:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:20:50 Aux= 07:20:50 Message to Camera, serial 4426 queued 07:21:21 Received message from Master: op=PointingHead serial=4433 07:21:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:21:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:21:22 Point started: ret=0 07:21:22 point_skyscan result=0 07:21:22 Check angles 07:21:22 SkyScan query 07:21:23 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.285<-13419 Statuses=0009 0009 07:21:23 Msec=0 True Az=152.655 Ze=-21.285 Az status=0009 Ze status=0009 07:21:23 Check angles 07:21:23 SkyScan query 07:21:24 SkyScan query done: ret=0 az=134.79<-8986 ze=0.09<-11994 Statuses=0009 0009 07:21:24 Msec=750 True Az=134.79 Ze=0.09 Az status=0009 Ze status=0009 07:21:24 Check angles 07:21:24 SkyScan query 07:21:24 SkyScan query done: ret=0 az=117.285<-7819 ze=21.06<-10596 Statuses=0009 0009 07:21:24 Msec=1500 True Az=117.285 Ze=21.06 Az status=0009 Ze status=0009 07:21:25 Check angles 07:21:25 SkyScan query 07:21:25 SkyScan query done: ret=0 az=99.885<-6659 ze=42.015<-9199 Statuses=0009 0009 07:21:25 Msec=2250 True Az=99.885 Ze=42.015 Az status=0009 Ze status=0009 07:21:25 Check angles 07:21:25 SkyScan query 07:21:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 07:21:26 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 07:21:26 Check angles 07:21:26 SkyScan query 07:21:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:21:27 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:21:27 Message to Master queued w/err=0: serial=4433 error=0 07:21:32 Received message from Master: op=Filter serial=4434 07:21:32 Color wheel filter change from 0 to 0 07:21:32 FLIGetFilterPos err=0 currentPosition=0 07:21:32 FLIGetStepsRemaining err=0 RemainingSteps=0 07:21:32 Filter is already there-color wheel unchanged 07:21:32 Received message from Master: op=Shutter serial=4435 07:21:32 Shutter LASER close 07:21:32 Received message from Camera: op=State serial=4437 07:21:32 GetSingleValue result=40 Value=cccccccc 07:21:32 SkyScan query 07:21:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:21:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:33 Parameters OK 07:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:33 Set A/D data flow result=40 07:21:33 Set A/D channel type result=40 07:21:33 Set A/D encoding result=40 07:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:33 Set channel filter=0.000000e+000 result=40 07:21:33 Config A/D Result=40 07:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:33 Get A/D filter: -9.255963e+061 result=40 07:21:33 Get A/D value=-858993460 result=40 07:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:21:33 Parameters OK 07:21:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:21:33 Set A/D data flow result=40 07:21:33 Set A/D channel type result=40 07:21:33 Set A/D encoding result=40 07:21:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:21:33 Set channel filter=0.000000e+000 result=40 07:21:33 Config A/D Result=40 07:21:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:21:33 Get A/D filter: -9.255963e+061 result=40 07:21:33 Get A/D value=-858993460 result=40 07:21:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:21:33 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:21:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:21:33 Aux= 07:21:33 Message to Camera, serial 4437 queued 07:21:49 Received message from Master: op=Identify serial=4438 07:22:03 Received message from Master: op=PointingHead serial=4447 07:22:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:22:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:22:04 Point started: ret=0 07:22:04 point_skyscan result=0 07:22:05 Check angles 07:22:05 SkyScan query 07:22:05 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 07:22:05 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 07:22:05 Check angles 07:22:05 SkyScan query 07:22:06 SkyScan query done: ret=0 az=126.96<-8464 ze=38.505<-9433 Statuses=0009 0008 07:22:06 Msec=750 True Az=126.96 Ze=38.505 Az status=0009 Ze status=0008 07:22:06 Check angles 07:22:06 SkyScan query 07:22:07 SkyScan query done: ret=0 az=144.6<-9640 ze=38.505<-9433 Statuses=0009 0008 07:22:07 Msec=1500 True Az=144.6 Ze=38.505 Az status=0009 Ze status=0008 07:22:07 Check angles 07:22:07 SkyScan query 07:22:07 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 07:22:07 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 07:22:08 Check angles 07:22:08 SkyScan query 07:22:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:22:08 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:22:08 Check angles 07:22:08 SkyScan query 07:22:09 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:22:09 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:22:09 Message to Master queued w/err=0: serial=4447 error=0 07:22:14 Received message from Master: op=Filter serial=4448 07:22:14 Color wheel filter change from 0 to 0 07:22:14 FLIGetFilterPos err=0 currentPosition=0 07:22:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:14 Filter is already there-color wheel unchanged 07:22:14 Received message from Master: op=Shutter serial=4449 07:22:14 Shutter LASER close 07:22:14 Received message from Camera: op=State serial=4451 07:22:14 GetSingleValue result=40 Value=cccccccc 07:22:14 SkyScan query 07:22:15 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:15 Parameters OK 07:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:15 Set A/D data flow result=40 07:22:15 Set A/D channel type result=40 07:22:15 Set A/D encoding result=40 07:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:15 Set channel filter=0.000000e+000 result=40 07:22:15 Config A/D Result=40 07:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:15 Get A/D filter: -9.255963e+061 result=40 07:22:15 Get A/D value=-858993460 result=40 07:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:15 Parameters OK 07:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:15 Set A/D data flow result=40 07:22:15 Set A/D channel type result=40 07:22:15 Set A/D encoding result=40 07:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:15 Set channel filter=0.000000e+000 result=40 07:22:15 Config A/D Result=40 07:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:15 Get A/D filter: -9.255963e+061 result=40 07:22:15 Get A/D value=-858993460 result=40 07:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:15 Aux= 07:22:15 Message to Camera, serial 4451 queued 07:22:45 Received message from Master: op=PointingHead serial=4458 07:22:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:22:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:22:46 Point started: ret=0 07:22:46 point_skyscan result=0 07:22:47 Check angles 07:22:47 SkyScan query 07:22:47 SkyScan query done: ret=0 az=152.985<-10199 ze=8.655<-11423 Statuses=0009 0009 07:22:47 Msec=0 True Az=152.985 Ze=8.655 Az status=0009 Ze status=0009 07:22:47 Check angles 07:22:47 SkyScan query 07:22:48 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.75<-12850 Statuses=0009 0009 07:22:48 Msec=750 True Az=135.15 Ze=-12.75 Az status=0009 Ze status=0009 07:22:48 Check angles 07:22:48 SkyScan query 07:22:49 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.675<-14245 Statuses=0009 0009 07:22:49 Msec=1500 True Az=117.6 Ze=-33.675 Az status=0009 Ze status=0009 07:22:49 Check angles 07:22:49 SkyScan query 07:22:49 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.54<-15436 Statuses=0009 0009 07:22:49 Msec=2250 True Az=100.2 Ze=-51.54 Az status=0009 Ze status=0009 07:22:50 Check angles 07:22:50 SkyScan query 07:22:50 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:22:50 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:22:50 Check angles 07:22:50 SkyScan query 07:22:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:22:51 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:22:51 Message to Master queued w/err=0: serial=4458 error=0 07:22:56 Received message from Master: op=Filter serial=4459 07:22:56 Color wheel filter change from 0 to 0 07:22:56 FLIGetFilterPos err=0 currentPosition=0 07:22:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:22:56 Filter is already there-color wheel unchanged 07:22:56 Received message from Master: op=Shutter serial=4460 07:22:56 Shutter LASER close 07:22:56 Received message from Camera: op=State serial=4462 07:22:56 GetSingleValue result=40 Value=cccccccc 07:22:56 SkyScan query 07:22:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:22:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:57 Parameters OK 07:22:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:57 Set A/D data flow result=40 07:22:57 Set A/D channel type result=40 07:22:57 Set A/D encoding result=40 07:22:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:57 Set channel filter=0.000000e+000 result=40 07:22:57 Config A/D Result=40 07:22:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:57 Get A/D filter: -9.255963e+061 result=40 07:22:57 Get A/D value=-858993460 result=40 07:22:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:22:57 Parameters OK 07:22:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:22:57 Set A/D data flow result=40 07:22:57 Set A/D channel type result=40 07:22:57 Set A/D encoding result=40 07:22:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:22:57 Set channel filter=0.000000e+000 result=40 07:22:57 Config A/D Result=40 07:22:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:22:57 Get A/D filter: -9.255963e+061 result=40 07:22:57 Get A/D value=-858993460 result=40 07:22:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:22:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:22:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:22:57 Aux= 07:22:57 Message to Camera, serial 4462 queued 07:23:28 Received message from Master: op=PointingHead serial=4469 07:23:28 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:23:28 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:23:28 Point started: ret=0 07:23:28 point_skyscan result=0 07:23:29 Check angles 07:23:29 SkyScan query 07:23:29 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.345<-17423 Statuses=0009 0009 07:23:29 Msec=0 True Az=109.035 Ze=-81.345 Az status=0009 Ze status=0009 07:23:29 Check angles 07:23:29 SkyScan query 07:23:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.735<-18849 Statuses=0008 0009 07:23:30 Msec=750 True Az=113.01 Ze=-102.735 Az status=0008 Ze status=0009 07:23:30 Check angles 07:23:30 SkyScan query 07:23:31 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.125<-20275 Statuses=0008 0009 07:23:31 Msec=1500 True Az=113.01 Ze=-124.125 Az status=0008 Ze status=0009 07:23:31 Check angles 07:23:31 SkyScan query 07:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 07:23:32 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 07:23:32 Check angles 07:23:32 SkyScan query 07:23:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 07:23:32 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 07:23:32 Check angles 07:23:32 SkyScan query 07:23:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:23:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:23:33 Message to Master queued w/err=0: serial=4469 error=0 07:23:38 Received message from Master: op=Filter serial=4470 07:23:38 Color wheel filter change from 0 to 0 07:23:38 FLIGetFilterPos err=0 currentPosition=0 07:23:38 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:38 Filter is already there-color wheel unchanged 07:23:38 Received message from Master: op=Shutter serial=4471 07:23:38 Shutter LASER open 07:23:38 Received message from Camera: op=State serial=4473 07:23:38 GetSingleValue result=40 Value=cccccccc 07:23:38 SkyScan query 07:23:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:23:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:39 Parameters OK 07:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:39 Set A/D data flow result=40 07:23:39 Set A/D channel type result=40 07:23:39 Set A/D encoding result=40 07:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:39 Set channel filter=0.000000e+000 result=40 07:23:39 Config A/D Result=40 07:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:39 Get A/D filter: -9.255963e+061 result=40 07:23:39 Get A/D value=-858993460 result=40 07:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:39 Parameters OK 07:23:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:39 Set A/D data flow result=40 07:23:39 Set A/D channel type result=40 07:23:39 Set A/D encoding result=40 07:23:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:39 Set channel filter=0.000000e+000 result=40 07:23:39 Config A/D Result=40 07:23:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:39 Get A/D filter: -9.255963e+061 result=40 07:23:39 Get A/D value=-858993460 result=40 07:23:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:39 Aux= 07:23:39 Message to Camera, serial 4473 queued 07:23:41 Received message from Master: op=Shutter serial=4477 07:23:41 Shutter LASER close 07:23:42 Received message from Master: op=PointingHead serial=4481 07:23:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:23:42 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:23:42 Point started: ret=0 07:23:42 point_skyscan result=0 07:23:43 Check angles 07:23:43 SkyScan query 07:23:44 SkyScan query done: ret=0 az=89.64<-5976 ze=156.885<-1541 Statuses=0009 0009 07:23:44 Msec=0 True Az=89.64 Ze=156.885 Az status=0009 Ze status=0009 07:23:44 Check angles 07:23:44 SkyScan query 07:23:44 SkyScan query done: ret=0 az=71.76<-4784 ze=135.465<-2969 Statuses=0009 0009 07:23:44 Msec=750 True Az=71.76 Ze=135.465 Az status=0009 Ze status=0009 07:23:44 Check angles 07:23:44 SkyScan query 07:23:45 SkyScan query done: ret=0 az=54.42<-3628 ze=114.525<-4365 Statuses=0009 0009 07:23:45 Msec=1500 True Az=54.42 Ze=114.525 Az status=0009 Ze status=0009 07:23:45 Check angles 07:23:45 SkyScan query 07:23:46 SkyScan query done: ret=0 az=40.905<-2727 ze=93.57<-5762 Statuses=0009 0009 07:23:46 Msec=2250 True Az=40.905 Ze=93.57 Az status=0009 Ze status=0009 07:23:46 Check angles 07:23:46 SkyScan query 07:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=72.18<-7188 Statuses=0008 0009 07:23:47 Msec=3000 True Az=40.995 Ze=72.18 Az status=0008 Ze status=0009 07:23:47 Check angles 07:23:47 SkyScan query 07:23:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.14<-8524 Statuses=0008 0009 07:23:47 Msec=3750 True Az=40.995 Ze=52.14 Az status=0008 Ze status=0009 07:23:47 Check angles 07:23:47 SkyScan query 07:23:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:23:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:23:48 Message to Master queued w/err=0: serial=4481 error=0 07:23:53 Received message from Master: op=Filter serial=4482 07:23:53 Color wheel filter change from 0 to 0 07:23:53 FLIGetFilterPos err=0 currentPosition=0 07:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:23:53 Filter is already there-color wheel unchanged 07:23:53 Received message from Master: op=Shutter serial=4483 07:23:53 Shutter LASER close 07:23:53 Received message from Camera: op=State serial=4485 07:23:53 GetSingleValue result=40 Value=cccccccc 07:23:53 SkyScan query 07:23:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:54 Parameters OK 07:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:54 Set A/D data flow result=40 07:23:54 Set A/D channel type result=40 07:23:54 Set A/D encoding result=40 07:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:54 Set channel filter=0.000000e+000 result=40 07:23:54 Config A/D Result=40 07:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:54 Get A/D filter: -9.255963e+061 result=40 07:23:54 Get A/D value=-858993460 result=40 07:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:23:54 Parameters OK 07:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:23:54 Set A/D data flow result=40 07:23:54 Set A/D channel type result=40 07:23:54 Set A/D encoding result=40 07:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:23:54 Set channel filter=0.000000e+000 result=40 07:23:54 Config A/D Result=40 07:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:23:54 Get A/D filter: -9.255963e+061 result=40 07:23:54 Get A/D value=-858993460 result=40 07:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:23:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:23:54 Aux= 07:23:54 Message to Camera, serial 4485 queued 07:24:25 Received message from Master: op=PointingHead serial=4492 07:24:25 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:24:25 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:24:25 Point started: ret=0 07:24:25 point_skyscan result=0 07:24:26 Check angles 07:24:26 SkyScan query 07:24:26 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 07:24:26 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 07:24:27 Check angles 07:24:27 SkyScan query 07:24:27 SkyScan query done: ret=0 az=81.6<-5440 ze=66.495<-7567 Statuses=0009 0008 07:24:27 Msec=750 True Az=81.6 Ze=66.495 Az status=0009 Ze status=0008 07:24:27 Check angles 07:24:27 SkyScan query 07:24:28 SkyScan query done: ret=0 az=99.165<-6611 ze=66.495<-7567 Statuses=0009 0008 07:24:28 Msec=1500 True Az=99.165 Ze=66.495 Az status=0009 Ze status=0008 07:24:28 Check angles 07:24:28 SkyScan query 07:24:29 SkyScan query done: ret=0 az=116.85<-7790 ze=66.495<-7567 Statuses=0009 0008 07:24:29 Msec=2250 True Az=116.85 Ze=66.495 Az status=0009 Ze status=0008 07:24:29 Check angles 07:24:29 SkyScan query 07:24:29 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 07:24:29 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 07:24:30 Check angles 07:24:30 SkyScan query 07:24:30 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 07:24:30 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 07:24:30 Check angles 07:24:30 SkyScan query 07:24:31 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:24:31 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:24:31 Message to Master queued w/err=0: serial=4492 error=0 07:24:36 Received message from Master: op=Filter serial=4493 07:24:36 Color wheel filter change from 0 to 0 07:24:36 FLIGetFilterPos err=0 currentPosition=0 07:24:36 FLIGetStepsRemaining err=0 RemainingSteps=0 07:24:36 Filter is already there-color wheel unchanged 07:24:36 Received message from Master: op=Shutter serial=4494 07:24:36 Shutter LASER close 07:24:36 Received message from Camera: op=State serial=4496 07:24:36 GetSingleValue result=40 Value=cccccccc 07:24:36 SkyScan query 07:24:37 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:24:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:37 Parameters OK 07:24:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:37 Set A/D data flow result=40 07:24:37 Set A/D channel type result=40 07:24:37 Set A/D encoding result=40 07:24:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:37 Set channel filter=0.000000e+000 result=40 07:24:37 Config A/D Result=40 07:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:37 Get A/D filter: -9.255963e+061 result=40 07:24:37 Get A/D value=-858993460 result=40 07:24:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:24:37 Parameters OK 07:24:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:24:37 Set A/D data flow result=40 07:24:37 Set A/D channel type result=40 07:24:37 Set A/D encoding result=40 07:24:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:24:37 Set channel filter=0.000000e+000 result=40 07:24:37 Config A/D Result=40 07:24:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:24:37 Get A/D filter: -9.255963e+061 result=40 07:24:37 Get A/D value=-858993460 result=40 07:24:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:24:37 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:24:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:24:37 Aux= 07:24:37 Message to Camera, serial 4496 queued 07:25:08 Received message from Master: op=PointingHead serial=4503 07:25:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:25:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:25:08 Point started: ret=0 07:25:08 point_skyscan result=0 07:25:09 Check angles 07:25:09 SkyScan query 07:25:09 SkyScan query done: ret=0 az=135.12<-9008 ze=36.84<-9544 Statuses=0009 0009 07:25:09 Msec=0 True Az=135.12 Ze=36.84 Az status=0009 Ze status=0009 07:25:09 Check angles 07:25:09 SkyScan query 07:25:10 SkyScan query done: ret=0 az=117.63<-7842 ze=15.87<-10942 Statuses=0009 0009 07:25:10 Msec=750 True Az=117.63 Ze=15.87 Az status=0009 Ze status=0009 07:25:10 Check angles 07:25:10 SkyScan query 07:25:11 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.085<-12339 Statuses=0009 0009 07:25:11 Msec=1500 True Az=100.245 Ze=-5.085 Az status=0009 Ze status=0009 07:25:11 Check angles 07:25:11 SkyScan query 07:25:12 SkyScan query done: ret=0 az=82.74<-5516 ze=-26.055<-13737 Statuses=0009 0009 07:25:12 Msec=2250 True Az=82.74 Ze=-26.055 Az status=0009 Ze status=0009 07:25:12 Check angles 07:25:12 SkyScan query 07:25:12 SkyScan query done: ret=0 az=65.28<-4352 ze=-38.55<-14570 Statuses=0009 0008 07:25:12 Msec=3000 True Az=65.28 Ze=-38.55 Az status=0009 Ze status=0008 07:25:12 Check angles 07:25:12 SkyScan query 07:25:13 SkyScan query done: ret=0 az=47.835<-3189 ze=-38.535<-14569 Statuses=0009 0008 07:25:13 Msec=3750 True Az=47.835 Ze=-38.535 Az status=0009 Ze status=0008 07:25:13 Check angles 07:25:13 SkyScan query 07:25:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:25:14 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:25:14 Message to Master queued w/err=0: serial=4503 error=0 07:25:19 Received message from Master: op=Filter serial=4504 07:25:19 Color wheel filter change from 0 to 0 07:25:19 FLIGetFilterPos err=0 currentPosition=0 07:25:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:25:19 Filter is already there-color wheel unchanged 07:25:19 Received message from Master: op=Shutter serial=4505 07:25:19 Shutter LASER close 07:25:19 Received message from Camera: op=State serial=4507 07:25:19 GetSingleValue result=40 Value=cccccccc 07:25:19 SkyScan query 07:25:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:25:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:20 Parameters OK 07:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:20 Set A/D data flow result=40 07:25:20 Set A/D channel type result=40 07:25:20 Set A/D encoding result=40 07:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:20 Set channel filter=0.000000e+000 result=40 07:25:20 Config A/D Result=40 07:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:20 Get A/D filter: -9.255963e+061 result=40 07:25:20 Get A/D value=-858993460 result=40 07:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:25:20 Parameters OK 07:25:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:25:20 Set A/D data flow result=40 07:25:20 Set A/D channel type result=40 07:25:20 Set A/D encoding result=40 07:25:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:25:20 Set channel filter=0.000000e+000 result=40 07:25:20 Config A/D Result=40 07:25:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:25:20 Get A/D filter: -9.255963e+061 result=40 07:25:20 Get A/D value=-858993460 result=40 07:25:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:25:20 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:25:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:25:20 Aux= 07:25:20 Message to Camera, serial 4507 queued 07:25:50 Received message from Master: op=PointingHead serial=4514 07:25:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:25:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:25:51 Point started: ret=0 07:25:51 point_skyscan result=0 07:25:52 Check angles 07:25:52 SkyScan query 07:25:52 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.19<-16546 Statuses=0009 0009 07:25:52 Msec=0 True Az=63.81 Ze=-68.19 Az status=0009 Ze status=0009 07:25:52 Check angles 07:25:52 SkyScan query 07:25:53 SkyScan query done: ret=0 az=81.42<-5428 ze=-89.16<-17944 Statuses=0009 0009 07:25:53 Msec=750 True Az=81.42 Ze=-89.16 Az status=0009 Ze status=0009 07:25:53 Check angles 07:25:53 SkyScan query 07:25:54 SkyScan query done: ret=0 az=99.09<-6606 ze=-110.085<-19339 Statuses=0009 0009 07:25:54 Msec=1500 True Az=99.09 Ze=-110.085 Az status=0009 Ze status=0009 07:25:54 Check angles 07:25:54 SkyScan query 07:25:54 SkyScan query done: ret=0 az=116.685<-7779 ze=-131.475<-20765 Statuses=0009 0009 07:25:54 Msec=2250 True Az=116.685 Ze=-131.475 Az status=0009 Ze status=0009 07:25:55 Check angles 07:25:55 SkyScan query 07:25:55 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 07:25:55 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 07:25:55 Check angles 07:25:55 SkyScan query 07:25:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:25:56 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:25:56 Message to Master queued w/err=0: serial=4514 error=0 07:26:01 Received message from Master: op=Filter serial=4515 07:26:01 Color wheel filter change from 0 to 0 07:26:01 FLIGetFilterPos err=0 currentPosition=0 07:26:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:01 Filter is already there-color wheel unchanged 07:26:01 Received message from Master: op=Shutter serial=4516 07:26:01 Shutter LASER close 07:26:01 Received message from Camera: op=State serial=4518 07:26:01 GetSingleValue result=40 Value=cccccccc 07:26:01 SkyScan query 07:26:02 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:26:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:02 Parameters OK 07:26:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:02 Set A/D data flow result=40 07:26:02 Set A/D channel type result=40 07:26:02 Set A/D encoding result=40 07:26:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:02 Set channel filter=0.000000e+000 result=40 07:26:02 Config A/D Result=40 07:26:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:02 Get A/D filter: -9.255963e+061 result=40 07:26:02 Get A/D value=-858993460 result=40 07:26:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:02 Parameters OK 07:26:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:02 Set A/D data flow result=40 07:26:02 Set A/D channel type result=40 07:26:02 Set A/D encoding result=40 07:26:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:02 Set channel filter=0.000000e+000 result=40 07:26:02 Config A/D Result=40 07:26:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:02 Get A/D filter: -9.255963e+061 result=40 07:26:02 Get A/D value=-858993460 result=40 07:26:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:02 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:02 Aux= 07:26:02 Message to Camera, serial 4518 queued 07:26:33 Received message from Master: op=PointingHead serial=4525 07:26:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:26:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:26:33 Point started: ret=0 07:26:33 point_skyscan result=0 07:26:34 Check angles 07:26:34 SkyScan query 07:26:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.525<-23435 Statuses=0009 0009 07:26:34 Msec=0 True Az=113.01 Ze=-171.525 Az status=0009 Ze status=0009 07:26:34 Check angles 07:26:34 SkyScan query 07:26:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:26:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:26:35 Message to Master queued w/err=0: serial=4525 error=0 07:26:40 Received message from Master: op=Filter serial=4526 07:26:40 Color wheel filter change from 0 to 0 07:26:40 FLIGetFilterPos err=0 currentPosition=0 07:26:40 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:40 Filter is already there-color wheel unchanged 07:26:40 Received message from Master: op=Shutter serial=4527 07:26:40 Shutter LASER open 07:26:40 Received message from Camera: op=State serial=4529 07:26:40 GetSingleValue result=40 Value=cccccccc 07:26:40 SkyScan query 07:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:26:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:41 Parameters OK 07:26:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:41 Set A/D data flow result=40 07:26:41 Set A/D channel type result=40 07:26:41 Set A/D encoding result=40 07:26:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:41 Set channel filter=0.000000e+000 result=40 07:26:41 Config A/D Result=40 07:26:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:41 Get A/D filter: -9.255963e+061 result=40 07:26:41 Get A/D value=-858993460 result=40 07:26:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:41 Parameters OK 07:26:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:41 Set A/D data flow result=40 07:26:41 Set A/D channel type result=40 07:26:41 Set A/D encoding result=40 07:26:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:41 Set channel filter=0.000000e+000 result=40 07:26:41 Config A/D Result=40 07:26:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:41 Get A/D filter: -9.255963e+061 result=40 07:26:41 Get A/D value=-858993460 result=40 07:26:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:41 Aux= 07:26:41 Message to Camera, serial 4529 queued 07:26:43 Received message from Master: op=Shutter serial=4533 07:26:43 Shutter LASER close 07:26:44 Received message from Master: op=PointingHead serial=4537 07:26:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:26:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:26:44 Point started: ret=0 07:26:44 point_skyscan result=0 07:26:45 Check angles 07:26:45 SkyScan query 07:26:46 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.19<-21546 Statuses=0009 0009 07:26:46 Msec=0 True Az=136.185 Ze=-143.19 Az status=0009 Ze status=0009 07:26:46 Check angles 07:26:46 SkyScan query 07:26:46 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.22<-20148 Statuses=0009 0009 07:26:46 Msec=750 True Az=153.645 Ze=-122.22 Az status=0009 Ze status=0009 07:26:47 Check angles 07:26:47 SkyScan query 07:26:47 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.295<-18753 Statuses=0009 0009 07:26:47 Msec=1500 True Az=171.165 Ze=-101.295 Az status=0009 Ze status=0009 07:26:47 Check angles 07:26:47 SkyScan query 07:26:48 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.325<-17355 Statuses=0008 0009 07:26:48 Msec=2250 True Az=176.025 Ze=-80.325 Az status=0008 Ze status=0009 07:26:48 Check angles 07:26:48 SkyScan query 07:26:49 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.37<-15958 Statuses=0008 0009 07:26:49 Msec=3000 True Az=176.01 Ze=-59.37 Az status=0008 Ze status=0009 07:26:49 Check angles 07:26:49 SkyScan query 07:26:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:26:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:26:49 Message to Master queued w/err=0: serial=4537 error=0 07:26:54 Received message from Master: op=Filter serial=4538 07:26:54 Color wheel filter change from 0 to 0 07:26:54 FLIGetFilterPos err=0 currentPosition=0 07:26:54 FLIGetStepsRemaining err=0 RemainingSteps=0 07:26:54 Filter is already there-color wheel unchanged 07:26:55 Received message from Master: op=Shutter serial=4539 07:26:55 Shutter LASER close 07:26:55 Received message from Camera: op=State serial=4541 07:26:55 GetSingleValue result=40 Value=cccccccc 07:26:55 SkyScan query 07:26:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:26:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:55 Parameters OK 07:26:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:55 Set A/D data flow result=40 07:26:55 Set A/D channel type result=40 07:26:55 Set A/D encoding result=40 07:26:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:55 Set channel filter=0.000000e+000 result=40 07:26:55 Config A/D Result=40 07:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:55 Get A/D filter: -9.255963e+061 result=40 07:26:55 Get A/D value=-858993460 result=40 07:26:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:26:55 Parameters OK 07:26:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:26:55 Set A/D data flow result=40 07:26:55 Set A/D channel type result=40 07:26:55 Set A/D encoding result=40 07:26:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:26:55 Set channel filter=0.000000e+000 result=40 07:26:55 Config A/D Result=40 07:26:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:26:55 Get A/D filter: -9.255963e+061 result=40 07:26:55 Get A/D value=-858993460 result=40 07:26:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:26:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:26:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:26:55 Aux= 07:26:55 Message to Camera, serial 4541 queued 07:27:26 Received message from Master: op=PointingHead serial=4548 07:27:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:27:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:27:27 Point started: ret=0 07:27:27 point_skyscan result=0 07:27:27 Check angles 07:27:27 SkyScan query 07:27:28 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.39<-13426 Statuses=0009 0009 07:27:28 Msec=0 True Az=152.73 Ze=-21.39 Az status=0009 Ze status=0009 07:27:28 Check angles 07:27:28 SkyScan query 07:27:29 SkyScan query done: ret=0 az=134.835<-8989 ze=-0.015<-12001 Statuses=0009 0009 07:27:29 Msec=750 True Az=134.835 Ze=-0.015 Az status=0009 Ze status=0009 07:27:29 Check angles 07:27:29 SkyScan query 07:27:29 SkyScan query done: ret=0 az=117.345<-7823 ze=20.955<-10603 Statuses=0009 0009 07:27:29 Msec=1500 True Az=117.345 Ze=20.955 Az status=0009 Ze status=0009 07:27:30 Check angles 07:27:30 SkyScan query 07:27:30 SkyScan query done: ret=0 az=99.945<-6663 ze=41.88<-9208 Statuses=0009 0009 07:27:30 Msec=2250 True Az=99.945 Ze=41.88 Az status=0009 Ze status=0009 07:27:30 Check angles 07:27:30 SkyScan query 07:27:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:27:31 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:27:31 Check angles 07:27:31 SkyScan query 07:27:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:27:32 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:27:32 Message to Master queued w/err=0: serial=4548 error=0 07:27:37 Received message from Master: op=Filter serial=4549 07:27:37 Color wheel filter change from 0 to 0 07:27:37 FLIGetFilterPos err=0 currentPosition=0 07:27:37 FLIGetStepsRemaining err=0 RemainingSteps=0 07:27:37 Filter is already there-color wheel unchanged 07:27:37 Received message from Master: op=Shutter serial=4550 07:27:37 Shutter LASER close 07:27:37 Received message from Camera: op=State serial=4552 07:27:37 GetSingleValue result=40 Value=cccccccc 07:27:37 SkyScan query 07:27:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:27:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:37 Parameters OK 07:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:37 Set A/D data flow result=40 07:27:37 Set A/D channel type result=40 07:27:37 Set A/D encoding result=40 07:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:37 Set channel filter=0.000000e+000 result=40 07:27:37 Config A/D Result=40 07:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:37 Get A/D filter: -9.255963e+061 result=40 07:27:37 Get A/D value=-858993460 result=40 07:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:27:37 Parameters OK 07:27:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:27:37 Set A/D data flow result=40 07:27:37 Set A/D channel type result=40 07:27:37 Set A/D encoding result=40 07:27:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:27:37 Set channel filter=0.000000e+000 result=40 07:27:37 Config A/D Result=40 07:27:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:27:37 Get A/D filter: -9.255963e+061 result=40 07:27:37 Get A/D value=-858993460 result=40 07:27:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:27:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:27:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:27:37 Aux= 07:27:37 Message to Camera, serial 4552 queued 07:28:08 Received message from Master: op=PointingHead serial=4559 07:28:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:28:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:28:09 Point started: ret=0 07:28:09 point_skyscan result=0 07:28:09 Check angles 07:28:09 SkyScan query 07:28:10 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 07:28:10 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 07:28:10 Check angles 07:28:10 SkyScan query 07:28:11 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 07:28:11 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 07:28:11 Check angles 07:28:11 SkyScan query 07:28:11 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 07:28:11 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 07:28:12 Check angles 07:28:12 SkyScan query 07:28:12 SkyScan query done: ret=0 az=162.015<-10801 ze=38.505<-9433 Statuses=0009 0008 07:28:12 Msec=2250 True Az=162.015 Ze=38.505 Az status=0009 Ze status=0008 07:28:12 Check angles 07:28:12 SkyScan query 07:28:13 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:28:13 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:28:13 Check angles 07:28:13 SkyScan query 07:28:14 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:28:14 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:28:14 Message to Master queued w/err=0: serial=4559 error=0 07:28:19 Received message from Master: op=Filter serial=4560 07:28:19 Color wheel filter change from 0 to 0 07:28:19 FLIGetFilterPos err=0 currentPosition=0 07:28:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:28:19 Filter is already there-color wheel unchanged 07:28:19 Received message from Master: op=Shutter serial=4561 07:28:19 Shutter LASER close 07:28:19 Received message from Camera: op=State serial=4563 07:28:19 GetSingleValue result=40 Value=cccccccc 07:28:19 SkyScan query 07:28:20 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:28:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:20 Parameters OK 07:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:20 Set A/D data flow result=40 07:28:20 Set A/D channel type result=40 07:28:20 Set A/D encoding result=40 07:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:20 Set channel filter=0.000000e+000 result=40 07:28:20 Config A/D Result=40 07:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:20 Get A/D filter: -9.255963e+061 result=40 07:28:20 Get A/D value=-858993460 result=40 07:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:28:20 Parameters OK 07:28:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:28:20 Set A/D data flow result=40 07:28:20 Set A/D channel type result=40 07:28:20 Set A/D encoding result=40 07:28:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:28:20 Set channel filter=0.000000e+000 result=40 07:28:20 Config A/D Result=40 07:28:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:28:20 Get A/D filter: -9.255963e+061 result=40 07:28:20 Get A/D value=-858993460 result=40 07:28:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:28:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:28:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:28:20 Aux= 07:28:20 Message to Camera, serial 4563 queued 07:28:50 Received message from Master: op=PointingHead serial=4570 07:28:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:28:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:28:51 Point started: ret=0 07:28:51 point_skyscan result=0 07:28:51 Check angles 07:28:51 SkyScan query 07:28:52 SkyScan query done: ret=0 az=153.105<-10207 ze=8.835<-11411 Statuses=0009 0009 07:28:52 Msec=0 True Az=153.105 Ze=8.835 Az status=0009 Ze status=0009 07:28:52 Check angles 07:28:52 SkyScan query 07:28:53 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.54<-12836 Statuses=0009 0009 07:28:53 Msec=750 True Az=135.3 Ze=-12.54 Az status=0009 Ze status=0009 07:28:53 Check angles 07:28:53 SkyScan query 07:28:54 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.48<-14232 Statuses=0009 0009 07:28:54 Msec=1500 True Az=117.795 Ze=-33.48 Az status=0009 Ze status=0009 07:28:54 Check angles 07:28:54 SkyScan query 07:28:54 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.54<-15436 Statuses=0009 0009 07:28:54 Msec=2250 True Az=100.38 Ze=-51.54 Az status=0009 Ze status=0009 07:28:54 Check angles 07:28:54 SkyScan query 07:28:55 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:28:55 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:28:55 Check angles 07:28:55 SkyScan query 07:28:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:28:56 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:28:56 Message to Master queued w/err=0: serial=4570 error=0 07:29:01 Received message from Master: op=Filter serial=4571 07:29:01 Color wheel filter change from 0 to 0 07:29:01 FLIGetFilterPos err=0 currentPosition=0 07:29:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:01 Filter is already there-color wheel unchanged 07:29:01 Received message from Master: op=Shutter serial=4572 07:29:01 Shutter LASER close 07:29:01 Received message from Camera: op=State serial=4574 07:29:01 GetSingleValue result=40 Value=cccccccc 07:29:01 SkyScan query 07:29:02 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:29:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:02 Parameters OK 07:29:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:02 Set A/D data flow result=40 07:29:02 Set A/D channel type result=40 07:29:02 Set A/D encoding result=40 07:29:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:02 Set channel filter=0.000000e+000 result=40 07:29:02 Config A/D Result=40 07:29:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:02 Get A/D filter: -9.255963e+061 result=40 07:29:02 Get A/D value=-858993460 result=40 07:29:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:02 Parameters OK 07:29:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:02 Set A/D data flow result=40 07:29:02 Set A/D channel type result=40 07:29:02 Set A/D encoding result=40 07:29:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:02 Set channel filter=0.000000e+000 result=40 07:29:02 Config A/D Result=40 07:29:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:02 Get A/D filter: -9.255963e+061 result=40 07:29:02 Get A/D value=-858993460 result=40 07:29:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:02 Aux= 07:29:02 Message to Camera, serial 4574 queued 07:29:33 Received message from Master: op=PointingHead serial=4581 07:29:33 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:29:33 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:29:33 Point started: ret=0 07:29:33 point_skyscan result=0 07:29:34 Check angles 07:29:34 SkyScan query 07:29:34 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.69<-17446 Statuses=0009 0009 07:29:34 Msec=0 True Az=109.38 Ze=-81.69 Az status=0009 Ze status=0009 07:29:34 Check angles 07:29:34 SkyScan query 07:29:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.065<-18871 Statuses=0008 0009 07:29:35 Msec=750 True Az=112.995 Ze=-103.065 Az status=0008 Ze status=0009 07:29:35 Check angles 07:29:35 SkyScan query [UTC 2018-12-4 07:29:36] 07:29:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.02<-20268 Statuses=0008 0009 07:29:36 Msec=1500 True Az=113.01 Ze=-124.02 Az status=0008 Ze status=0009 07:29:36 Check angles 07:29:36 SkyScan query 07:29:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 07:29:36 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 07:29:37 Check angles 07:29:37 SkyScan query 07:29:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.9<-23060 Statuses=0008 0009 07:29:37 Msec=3000 True Az=112.995 Ze=-165.9 Az status=0008 Ze status=0009 07:29:37 Check angles 07:29:37 SkyScan query 07:29:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:29:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:29:38 Message to Master queued w/err=0: serial=4581 error=0 07:29:43 Received message from Master: op=Filter serial=4582 07:29:43 Color wheel filter change from 0 to 0 07:29:43 FLIGetFilterPos err=0 currentPosition=0 07:29:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:43 Filter is already there-color wheel unchanged 07:29:43 Received message from Master: op=Shutter serial=4583 07:29:43 Shutter LASER open 07:29:43 Received message from Camera: op=State serial=4585 07:29:43 GetSingleValue result=40 Value=cccccccc 07:29:43 SkyScan query 07:29:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:29:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:44 Parameters OK 07:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:44 Set A/D data flow result=40 07:29:44 Set A/D channel type result=40 07:29:44 Set A/D encoding result=40 07:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:44 Set channel filter=0.000000e+000 result=40 07:29:44 Config A/D Result=40 07:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:44 Get A/D filter: -9.255963e+061 result=40 07:29:44 Get A/D value=-858993460 result=40 07:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:44 Parameters OK 07:29:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:44 Set A/D data flow result=40 07:29:44 Set A/D channel type result=40 07:29:44 Set A/D encoding result=40 07:29:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:44 Set channel filter=0.000000e+000 result=40 07:29:44 Config A/D Result=40 07:29:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:44 Get A/D filter: -9.255963e+061 result=40 07:29:44 Get A/D value=-858993460 result=40 07:29:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:44 Aux= 07:29:44 Message to Camera, serial 4585 queued 07:29:46 Received message from Master: op=Shutter serial=4589 07:29:46 Shutter LASER close 07:29:47 Received message from Master: op=PointingHead serial=4593 07:29:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:29:47 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:29:47 Point started: ret=0 07:29:47 point_skyscan result=0 07:29:48 Check angles 07:29:48 SkyScan query 07:29:48 SkyScan query done: ret=0 az=89.91<-5994 ze=157.215<-1519 Statuses=0009 0009 07:29:48 Msec=0 True Az=89.91 Ze=157.215 Az status=0009 Ze status=0009 07:29:49 Check angles 07:29:49 SkyScan query 07:29:49 SkyScan query done: ret=0 az=72.06<-4804 ze=135.795<-2947 Statuses=0009 0009 07:29:49 Msec=750 True Az=72.06 Ze=135.795 Az status=0009 Ze status=0009 07:29:49 Check angles 07:29:49 SkyScan query 07:29:50 SkyScan query done: ret=0 az=54.435<-3629 ze=114.42<-4372 Statuses=0009 0009 07:29:50 Msec=1500 True Az=54.435 Ze=114.42 Az status=0009 Ze status=0009 07:29:50 Check angles 07:29:50 SkyScan query 07:29:51 SkyScan query done: ret=0 az=40.935<-2729 ze=93.465<-5769 Statuses=0009 0009 07:29:51 Msec=2250 True Az=40.935 Ze=93.465 Az status=0009 Ze status=0009 07:29:51 Check angles 07:29:51 SkyScan query 07:29:51 SkyScan query done: ret=0 az=40.995<-2733 ze=72.48<-7168 Statuses=0008 0009 07:29:51 Msec=3000 True Az=40.995 Ze=72.48 Az status=0008 Ze status=0009 07:29:52 Check angles 07:29:52 SkyScan query 07:29:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 07:29:52 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 07:29:52 Check angles 07:29:52 SkyScan query 07:29:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:29:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:29:53 Message to Master queued w/err=0: serial=4593 error=0 07:29:58 Received message from Master: op=Filter serial=4594 07:29:58 Color wheel filter change from 0 to 0 07:29:58 FLIGetFilterPos err=0 currentPosition=0 07:29:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:29:58 Filter is already there-color wheel unchanged 07:29:58 Received message from Master: op=Shutter serial=4595 07:29:58 Shutter LASER close 07:29:58 Received message from Camera: op=State serial=4597 07:29:58 GetSingleValue result=40 Value=cccccccc 07:29:58 SkyScan query 07:29:59 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:29:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:59 Parameters OK 07:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:59 Set A/D data flow result=40 07:29:59 Set A/D channel type result=40 07:29:59 Set A/D encoding result=40 07:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:59 Set channel filter=0.000000e+000 result=40 07:29:59 Config A/D Result=40 07:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:59 Get A/D filter: -9.255963e+061 result=40 07:29:59 Get A/D value=-858993460 result=40 07:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:29:59 Parameters OK 07:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:29:59 Set A/D data flow result=40 07:29:59 Set A/D channel type result=40 07:29:59 Set A/D encoding result=40 07:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:29:59 Set channel filter=0.000000e+000 result=40 07:29:59 Config A/D Result=40 07:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:29:59 Get A/D filter: -9.255963e+061 result=40 07:29:59 Get A/D value=-858993460 result=40 07:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:29:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:29:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:29:59 Aux= 07:29:59 Message to Camera, serial 4597 queued 07:30:30 Received message from Master: op=PointingHead serial=4604 07:30:30 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:30:30 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:30:30 Point started: ret=0 07:30:30 point_skyscan result=0 07:30:31 Check angles 07:30:31 SkyScan query 07:30:31 SkyScan query done: ret=0 az=63.855<-4257 ze=66.555<-7563 Statuses=0009 0008 07:30:31 Msec=0 True Az=63.855 Ze=66.555 Az status=0009 Ze status=0008 07:30:32 Check angles 07:30:32 SkyScan query 07:30:32 SkyScan query done: ret=0 az=81.345<-5423 ze=66.495<-7567 Statuses=0009 0008 07:30:32 Msec=750 True Az=81.345 Ze=66.495 Az status=0009 Ze status=0008 07:30:32 Check angles 07:30:32 SkyScan query 07:30:33 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 07:30:33 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 07:30:33 Check angles 07:30:33 SkyScan query 07:30:34 SkyScan query done: ret=0 az=116.34<-7756 ze=66.495<-7567 Statuses=0009 0008 07:30:34 Msec=2250 True Az=116.34 Ze=66.495 Az status=0009 Ze status=0008 07:30:34 Check angles 07:30:34 SkyScan query 07:30:34 SkyScan query done: ret=0 az=133.89<-8926 ze=66.495<-7567 Statuses=0009 0008 07:30:34 Msec=3000 True Az=133.89 Ze=66.495 Az status=0009 Ze status=0008 07:30:35 Check angles 07:30:35 SkyScan query 07:30:35 SkyScan query done: ret=0 az=151.32<-10088 ze=66.495<-7567 Statuses=0009 0008 07:30:35 Msec=3750 True Az=151.32 Ze=66.495 Az status=0009 Ze status=0008 07:30:35 Check angles 07:30:35 SkyScan query 07:30:36 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:30:36 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:30:36 Message to Master queued w/err=0: serial=4604 error=0 07:30:41 Received message from Master: op=Filter serial=4605 07:30:41 Color wheel filter change from 0 to 0 07:30:41 FLIGetFilterPos err=0 currentPosition=0 07:30:41 FLIGetStepsRemaining err=0 RemainingSteps=0 07:30:41 Filter is already there-color wheel unchanged 07:30:41 Received message from Master: op=Shutter serial=4606 07:30:41 Shutter LASER close 07:30:41 Received message from Camera: op=State serial=4608 07:30:41 GetSingleValue result=40 Value=cccccccc 07:30:41 SkyScan query 07:30:42 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:30:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:42 Parameters OK 07:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:42 Set A/D data flow result=40 07:30:42 Set A/D channel type result=40 07:30:42 Set A/D encoding result=40 07:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:42 Set channel filter=0.000000e+000 result=40 07:30:42 Config A/D Result=40 07:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:42 Get A/D filter: -9.255963e+061 result=40 07:30:42 Get A/D value=-858993460 result=40 07:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:30:42 Parameters OK 07:30:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:30:42 Set A/D data flow result=40 07:30:42 Set A/D channel type result=40 07:30:42 Set A/D encoding result=40 07:30:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:30:42 Set channel filter=0.000000e+000 result=40 07:30:42 Config A/D Result=40 07:30:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:30:42 Get A/D filter: -9.255963e+061 result=40 07:30:42 Get A/D value=-858993460 result=40 07:30:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:30:42 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:30:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:30:42 Aux= 07:30:42 Message to Camera, serial 4608 queued 07:31:13 Received message from Master: op=PointingHead serial=4615 07:31:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:31:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:31:13 Point started: ret=0 07:31:13 point_skyscan result=0 07:31:14 Check angles 07:31:14 SkyScan query 07:31:14 SkyScan query done: ret=0 az=134.805<-8987 ze=36.45<-9570 Statuses=0009 0009 07:31:14 Msec=0 True Az=134.805 Ze=36.45 Az status=0009 Ze status=0009 07:31:14 Check angles 07:31:14 SkyScan query 07:31:15 SkyScan query done: ret=0 az=117.27<-7818 ze=15.51<-10966 Statuses=0009 0009 07:31:15 Msec=750 True Az=117.27 Ze=15.51 Az status=0009 Ze status=0009 07:31:15 Check angles 07:31:15 SkyScan query 07:31:16 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.46<-12364 Statuses=0009 0009 07:31:16 Msec=1500 True Az=99.93 Ze=-5.46 Az status=0009 Ze status=0009 07:31:16 Check angles 07:31:16 SkyScan query 07:31:16 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.43<-13762 Statuses=0009 0009 07:31:16 Msec=2250 True Az=82.305 Ze=-26.43 Az status=0009 Ze status=0009 07:31:17 Check angles 07:31:17 SkyScan query 07:31:17 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.565<-14571 Statuses=0009 0008 07:31:17 Msec=3000 True Az=64.92 Ze=-38.565 Az status=0009 Ze status=0008 07:31:17 Check angles 07:31:17 SkyScan query 07:31:18 SkyScan query done: ret=0 az=47.475<-3165 ze=-38.535<-14569 Statuses=0009 0008 07:31:18 Msec=3750 True Az=47.475 Ze=-38.535 Az status=0009 Ze status=0008 07:31:18 Check angles 07:31:18 SkyScan query 07:31:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:31:19 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:31:19 Message to Master queued w/err=0: serial=4615 error=0 07:31:24 Received message from Master: op=Filter serial=4616 07:31:24 Color wheel filter change from 0 to 0 07:31:24 FLIGetFilterPos err=0 currentPosition=0 07:31:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:31:24 Filter is already there-color wheel unchanged 07:31:24 Received message from Master: op=Shutter serial=4617 07:31:24 Shutter LASER close 07:31:24 Received message from Camera: op=State serial=4619 07:31:24 GetSingleValue result=40 Value=cccccccc 07:31:24 SkyScan query 07:31:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:31:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:25 Parameters OK 07:31:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:25 Set A/D data flow result=40 07:31:25 Set A/D channel type result=40 07:31:25 Set A/D encoding result=40 07:31:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:25 Set channel filter=0.000000e+000 result=40 07:31:25 Config A/D Result=40 07:31:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:25 Get A/D filter: -9.255963e+061 result=40 07:31:25 Get A/D value=-858993460 result=40 07:31:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:31:25 Parameters OK 07:31:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:31:25 Set A/D data flow result=40 07:31:25 Set A/D channel type result=40 07:31:25 Set A/D encoding result=40 07:31:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:31:25 Set channel filter=0.000000e+000 result=40 07:31:25 Config A/D Result=40 07:31:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:31:25 Get A/D filter: -9.255963e+061 result=40 07:31:25 Get A/D value=-858993460 result=40 07:31:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:31:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:31:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:31:25 Aux= 07:31:25 Message to Camera, serial 4619 queued 07:31:55 Received message from Master: op=PointingHead serial=4626 07:31:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:31:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:31:56 Point started: ret=0 07:31:56 point_skyscan result=0 07:31:56 Check angles 07:31:56 SkyScan query 07:31:57 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.34<-16556 Statuses=0009 0009 07:31:57 Msec=0 True Az=63.885 Ze=-68.34 Az status=0009 Ze status=0009 07:31:57 Check angles 07:31:57 SkyScan query 07:31:58 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.73<-17982 Statuses=0009 0009 07:31:58 Msec=750 True Az=81.885 Ze=-89.73 Az status=0009 Ze status=0009 07:31:58 Check angles 07:31:58 SkyScan query 07:31:59 SkyScan query done: ret=0 az=99.345<-6623 ze=-110.685<-19379 Statuses=0009 0009 07:31:59 Msec=1500 True Az=99.345 Ze=-110.685 Az status=0009 Ze status=0009 07:31:59 Check angles 07:31:59 SkyScan query 07:31:59 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.64<-20776 Statuses=0009 0009 07:31:59 Msec=2250 True Az=116.76 Ze=-131.64 Az status=0009 Ze status=0009 07:31:59 Check angles 07:31:59 SkyScan query 07:32:00 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 07:32:00 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 07:32:00 Check angles 07:32:00 SkyScan query 07:32:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:32:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:32:01 Message to Master queued w/err=0: serial=4626 error=0 07:32:06 Received message from Master: op=Filter serial=4627 07:32:06 Color wheel filter change from 0 to 0 07:32:06 FLIGetFilterPos err=0 currentPosition=0 07:32:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:06 Filter is already there-color wheel unchanged 07:32:06 Received message from Master: op=Shutter serial=4628 07:32:06 Shutter LASER close 07:32:06 Received message from Camera: op=State serial=4630 07:32:06 GetSingleValue result=40 Value=cccccccc 07:32:06 SkyScan query 07:32:07 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:32:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:07 Parameters OK 07:32:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:07 Set A/D data flow result=40 07:32:07 Set A/D channel type result=40 07:32:07 Set A/D encoding result=40 07:32:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:07 Set channel filter=0.000000e+000 result=40 07:32:07 Config A/D Result=40 07:32:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:07 Get A/D filter: -9.255963e+061 result=40 07:32:07 Get A/D value=-858993460 result=40 07:32:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:07 Parameters OK 07:32:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:07 Set A/D data flow result=40 07:32:07 Set A/D channel type result=40 07:32:07 Set A/D encoding result=40 07:32:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:07 Set channel filter=0.000000e+000 result=40 07:32:07 Config A/D Result=40 07:32:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:07 Get A/D filter: -9.255963e+061 result=40 07:32:07 Get A/D value=-858993460 result=40 07:32:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:07 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:07 Aux= 07:32:07 Message to Camera, serial 4630 queued [UTC 2018-12-4 07:32:09] 07:32:38 Received message from Master: op=PointingHead serial=4637 07:32:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:32:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:32:38 Point started: ret=0 07:32:38 point_skyscan result=0 07:32:39 Check angles 07:32:39 SkyScan query 07:32:39 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.15<-23410 Statuses=0009 0009 07:32:39 Msec=0 True Az=113.025 Ze=-171.15 Az status=0009 Ze status=0009 07:32:39 Check angles 07:32:39 SkyScan query 07:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:32:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:32:40 Message to Master queued w/err=0: serial=4637 error=0 07:32:45 Received message from Master: op=Filter serial=4638 07:32:45 Color wheel filter change from 0 to 0 07:32:45 FLIGetFilterPos err=0 currentPosition=0 07:32:45 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:45 Filter is already there-color wheel unchanged 07:32:45 Received message from Master: op=Shutter serial=4639 07:32:45 Shutter LASER open 07:32:45 Received message from Camera: op=State serial=4641 07:32:45 GetSingleValue result=40 Value=cccccccc 07:32:45 SkyScan query 07:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:32:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:46 Parameters OK 07:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:46 Set A/D data flow result=40 07:32:46 Set A/D channel type result=40 07:32:46 Set A/D encoding result=40 07:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:46 Set channel filter=0.000000e+000 result=40 07:32:46 Config A/D Result=40 07:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:46 Get A/D filter: -9.255963e+061 result=40 07:32:46 Get A/D value=-858993460 result=40 07:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:32:46 Parameters OK 07:32:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:32:46 Set A/D data flow result=40 07:32:46 Set A/D channel type result=40 07:32:46 Set A/D encoding result=40 07:32:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:32:46 Set channel filter=0.000000e+000 result=40 07:32:46 Config A/D Result=40 07:32:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:32:46 Get A/D filter: -9.255963e+061 result=40 07:32:46 Get A/D value=-858993460 result=40 07:32:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:32:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:32:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:32:46 Aux= 07:32:46 Message to Camera, serial 4641 queued 07:32:48 Received message from Master: op=Shutter serial=4645 07:32:48 Shutter LASER close 07:32:49 Received message from Master: op=PointingHead serial=4649 07:32:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:32:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:32:49 Point started: ret=0 07:32:49 point_skyscan result=0 07:32:50 Check angles 07:32:50 SkyScan query 07:32:51 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.31<-21554 Statuses=0009 0009 07:32:51 Msec=0 True Az=135.975 Ze=-143.31 Az status=0009 Ze status=0009 07:32:51 Check angles 07:32:51 SkyScan query 07:32:51 SkyScan query done: ret=0 az=153.51<-10234 ze=-122.355<-20157 Statuses=0009 0009 07:32:51 Msec=750 True Az=153.51 Ze=-122.355 Az status=0009 Ze status=0009 07:32:52 Check angles 07:32:52 SkyScan query 07:32:52 SkyScan query done: ret=0 az=171.24<-11416 ze=-100.98<-18732 Statuses=0009 0009 07:32:52 Msec=1500 True Az=171.24 Ze=-100.98 Az status=0009 Ze status=0009 07:32:52 Check angles 07:32:52 SkyScan query 07:32:53 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.025<-17335 Statuses=0008 0009 07:32:53 Msec=2250 True Az=176.025 Ze=-80.025 Az status=0008 Ze status=0009 07:32:53 Check angles 07:32:53 SkyScan query 07:32:54 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.07<-15938 Statuses=0008 0009 07:32:54 Msec=3000 True Az=176.01 Ze=-59.07 Az status=0008 Ze status=0009 07:32:54 Check angles 07:32:54 SkyScan query 07:32:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:32:54 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:32:54 Message to Master queued w/err=0: serial=4649 error=0 07:32:59 Received message from Master: op=Filter serial=4650 07:32:59 Color wheel filter change from 0 to 0 07:32:59 FLIGetFilterPos err=0 currentPosition=0 07:32:59 FLIGetStepsRemaining err=0 RemainingSteps=0 07:32:59 Filter is already there-color wheel unchanged 07:33:00 Received message from Master: op=Shutter serial=4651 07:33:00 Shutter LASER close 07:33:00 Received message from Camera: op=State serial=4653 07:33:00 GetSingleValue result=40 Value=cccccccc 07:33:00 SkyScan query 07:33:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:33:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:00 Parameters OK 07:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:00 Set A/D data flow result=40 07:33:00 Set A/D channel type result=40 07:33:00 Set A/D encoding result=40 07:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:00 Set channel filter=0.000000e+000 result=40 07:33:00 Config A/D Result=40 07:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:00 Get A/D filter: -9.255963e+061 result=40 07:33:00 Get A/D value=-858993460 result=40 07:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:00 Parameters OK 07:33:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:00 Set A/D data flow result=40 07:33:00 Set A/D channel type result=40 07:33:00 Set A/D encoding result=40 07:33:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:00 Set channel filter=0.000000e+000 result=40 07:33:00 Config A/D Result=40 07:33:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:00 Get A/D filter: -9.255963e+061 result=40 07:33:00 Get A/D value=-858993460 result=40 07:33:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:00 Aux= 07:33:00 Message to Camera, serial 4653 queued 07:33:31 Received message from Master: op=PointingHead serial=4660 07:33:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:33:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:33:32 Point started: ret=0 07:33:32 point_skyscan result=0 07:33:32 Check angles 07:33:32 SkyScan query 07:33:33 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.93<-13462 Statuses=0009 0009 07:33:33 Msec=0 True Az=153.165 Ze=-21.93 Az status=0009 Ze status=0009 07:33:33 Check angles 07:33:33 SkyScan query 07:33:34 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.96<-12064 Statuses=0009 0009 07:33:34 Msec=750 True Az=135.705 Ze=-0.96 Az status=0009 Ze status=0009 07:33:34 Check angles 07:33:34 SkyScan query 07:33:34 SkyScan query done: ret=0 az=117.78<-7852 ze=20.415<-10639 Statuses=0009 0009 07:33:34 Msec=1500 True Az=117.78 Ze=20.415 Az status=0009 Ze status=0009 07:33:35 Check angles 07:33:35 SkyScan query 07:33:35 SkyScan query done: ret=0 az=100.41<-6694 ze=41.385<-9241 Statuses=0009 0009 07:33:35 Msec=2250 True Az=100.41 Ze=41.385 Az status=0009 Ze status=0009 07:33:35 Check angles 07:33:35 SkyScan query 07:33:36 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 07:33:36 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 07:33:36 Check angles 07:33:36 SkyScan query 07:33:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:33:37 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:33:37 Message to Master queued w/err=0: serial=4660 error=0 07:33:42 Received message from Master: op=Filter serial=4661 07:33:42 Color wheel filter change from 0 to 0 07:33:42 FLIGetFilterPos err=0 currentPosition=0 07:33:42 FLIGetStepsRemaining err=0 RemainingSteps=0 07:33:42 Filter is already there-color wheel unchanged 07:33:42 Received message from Master: op=Shutter serial=4662 07:33:42 Shutter LASER close 07:33:42 Received message from Camera: op=State serial=4664 07:33:42 GetSingleValue result=40 Value=cccccccc 07:33:42 SkyScan query 07:33:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:33:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:42 Parameters OK 07:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:42 Set A/D data flow result=40 07:33:42 Set A/D channel type result=40 07:33:42 Set A/D encoding result=40 07:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:42 Set channel filter=0.000000e+000 result=40 07:33:42 Config A/D Result=40 07:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:42 Get A/D filter: -9.255963e+061 result=40 07:33:42 Get A/D value=-858993460 result=40 07:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:33:42 Parameters OK 07:33:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:33:42 Set A/D data flow result=40 07:33:42 Set A/D channel type result=40 07:33:42 Set A/D encoding result=40 07:33:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:33:42 Set channel filter=0.000000e+000 result=40 07:33:42 Config A/D Result=40 07:33:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:33:42 Get A/D filter: -9.255963e+061 result=40 07:33:42 Get A/D value=-858993460 result=40 07:33:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:33:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:33:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:33:42 Aux= 07:33:42 Message to Camera, serial 4664 queued 07:34:13 Received message from Master: op=PointingHead serial=4671 07:34:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:34:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:34:14 Point started: ret=0 07:34:14 point_skyscan result=0 07:34:14 Check angles 07:34:14 SkyScan query 07:34:15 SkyScan query done: ret=0 az=109.065<-7271 ze=38.49<-9434 Statuses=0009 0008 07:34:15 Msec=0 True Az=109.065 Ze=38.49 Az status=0009 Ze status=0008 07:34:15 Check angles 07:34:15 SkyScan query 07:34:16 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 07:34:16 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 07:34:16 Check angles 07:34:16 SkyScan query 07:34:16 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 07:34:16 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 07:34:17 Check angles 07:34:17 SkyScan query 07:34:17 SkyScan query done: ret=0 az=161.805<-10787 ze=38.505<-9433 Statuses=0009 0008 07:34:17 Msec=2250 True Az=161.805 Ze=38.505 Az status=0009 Ze status=0008 07:34:17 Check angles 07:34:17 SkyScan query 07:34:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:34:18 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:34:18 Check angles 07:34:18 SkyScan query 07:34:19 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:34:19 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:34:19 Message to Master queued w/err=0: serial=4671 error=0 07:34:24 Received message from Master: op=Filter serial=4672 07:34:24 Color wheel filter change from 0 to 0 07:34:24 FLIGetFilterPos err=0 currentPosition=0 07:34:24 FLIGetStepsRemaining err=0 RemainingSteps=0 07:34:24 Filter is already there-color wheel unchanged 07:34:24 Received message from Master: op=Shutter serial=4673 07:34:24 Shutter LASER close 07:34:24 Received message from Camera: op=State serial=4675 07:34:24 GetSingleValue result=40 Value=cccccccc 07:34:24 SkyScan query 07:34:25 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:25 Parameters OK 07:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:25 Set A/D data flow result=40 07:34:25 Set A/D channel type result=40 07:34:25 Set A/D encoding result=40 07:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:25 Set channel filter=0.000000e+000 result=40 07:34:25 Config A/D Result=40 07:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:25 Get A/D filter: -9.255963e+061 result=40 07:34:25 Get A/D value=-858993460 result=40 07:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:34:25 Parameters OK 07:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:34:25 Set A/D data flow result=40 07:34:25 Set A/D channel type result=40 07:34:25 Set A/D encoding result=40 07:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:34:25 Set channel filter=0.000000e+000 result=40 07:34:25 Config A/D Result=40 07:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:34:25 Get A/D filter: -9.255963e+061 result=40 07:34:25 Get A/D value=-858993460 result=40 07:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:34:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:34:25 Aux= 07:34:25 Message to Camera, serial 4675 queued 07:34:55 Received message from Master: op=PointingHead serial=4682 07:34:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:34:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:34:56 Point started: ret=0 07:34:56 point_skyscan result=0 07:34:57 Check angles 07:34:57 SkyScan query 07:34:57 SkyScan query done: ret=0 az=152.67<-10178 ze=8.22<-11452 Statuses=0009 0009 07:34:57 Msec=0 True Az=152.67 Ze=8.22 Az status=0009 Ze status=0009 07:34:57 Check angles 07:34:57 SkyScan query 07:34:58 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.705<-12847 Statuses=0009 0009 07:34:58 Msec=750 True Az=135.15 Ze=-12.705 Az status=0009 Ze status=0009 07:34:58 Check angles 07:34:58 SkyScan query 07:34:59 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.66<-14244 Statuses=0009 0009 07:34:59 Msec=1500 True Az=117.6 Ze=-33.66 Az status=0009 Ze status=0009 07:34:59 Check angles 07:34:59 SkyScan query 07:34:59 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.54<-15436 Statuses=0009 0009 07:34:59 Msec=2250 True Az=100.23 Ze=-51.54 Az status=0009 Ze status=0009 07:35:00 Check angles 07:35:00 SkyScan query 07:35:00 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:35:00 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:35:00 Check angles 07:35:00 SkyScan query 07:35:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:35:01 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:35:01 Message to Master queued w/err=0: serial=4682 error=0 07:35:06 Received message from Master: op=Filter serial=4683 07:35:06 Color wheel filter change from 0 to 0 07:35:06 FLIGetFilterPos err=0 currentPosition=0 07:35:06 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:06 Filter is already there-color wheel unchanged 07:35:06 Received message from Master: op=Shutter serial=4684 07:35:06 Shutter LASER close 07:35:06 Received message from Camera: op=State serial=4686 07:35:06 GetSingleValue result=40 Value=cccccccc 07:35:06 SkyScan query 07:35:07 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:35:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:07 Parameters OK 07:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:07 Set A/D data flow result=40 07:35:07 Set A/D channel type result=40 07:35:07 Set A/D encoding result=40 07:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:07 Set channel filter=0.000000e+000 result=40 07:35:07 Config A/D Result=40 07:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:07 Get A/D filter: -9.255963e+061 result=40 07:35:07 Get A/D value=-858993460 result=40 07:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:07 Parameters OK 07:35:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:07 Set A/D data flow result=40 07:35:07 Set A/D channel type result=40 07:35:07 Set A/D encoding result=40 07:35:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:07 Set channel filter=0.000000e+000 result=40 07:35:07 Config A/D Result=40 07:35:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:07 Get A/D filter: -9.255963e+061 result=40 07:35:07 Get A/D value=-858993460 result=40 07:35:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:07 Aux= 07:35:07 Message to Camera, serial 4686 queued 07:35:38 Received message from Master: op=PointingHead serial=4693 07:35:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:35:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:35:38 Point started: ret=0 07:35:38 point_skyscan result=0 07:35:39 Check angles 07:35:39 SkyScan query 07:35:39 SkyScan query done: ret=0 az=109.29<-7286 ze=-81.555<-17437 Statuses=0009 0009 07:35:39 Msec=0 True Az=109.29 Ze=-81.555 Az status=0009 Ze status=0009 07:35:40 Check angles 07:35:40 SkyScan query 07:35:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 07:35:40 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 07:35:40 Check angles 07:35:40 SkyScan query 07:35:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 07:35:41 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 07:35:41 Check angles 07:35:41 SkyScan query 07:35:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-144.405<-21627 Statuses=0008 0009 07:35:42 Msec=2250 True Az=113.01 Ze=-144.405 Az status=0008 Ze status=0009 07:35:42 Check angles 07:35:42 SkyScan query 07:35:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 07:35:42 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 07:35:43 Check angles 07:35:43 SkyScan query 07:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:35:43 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:35:43 Message to Master queued w/err=0: serial=4693 error=0 07:35:48 Received message from Master: op=Filter serial=4694 07:35:48 Color wheel filter change from 0 to 0 07:35:48 FLIGetFilterPos err=0 currentPosition=0 07:35:48 FLIGetStepsRemaining err=0 RemainingSteps=0 07:35:48 Filter is already there-color wheel unchanged 07:35:48 Received message from Master: op=Shutter serial=4695 07:35:48 Shutter LASER open 07:35:48 Received message from Camera: op=State serial=4697 07:35:48 GetSingleValue result=40 Value=cccccccc 07:35:48 SkyScan query 07:35:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:35:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:49 Parameters OK 07:35:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:49 Set A/D data flow result=40 07:35:49 Set A/D channel type result=40 07:35:49 Set A/D encoding result=40 07:35:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:49 Set channel filter=0.000000e+000 result=40 07:35:49 Config A/D Result=40 07:35:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:49 Get A/D filter: -9.255963e+061 result=40 07:35:49 Get A/D value=-858993460 result=40 07:35:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:35:49 Parameters OK 07:35:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:35:49 Set A/D data flow result=40 07:35:49 Set A/D channel type result=40 07:35:49 Set A/D encoding result=40 07:35:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:35:49 Set channel filter=0.000000e+000 result=40 07:35:49 Config A/D Result=40 07:35:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:35:49 Get A/D filter: -9.255963e+061 result=40 07:35:49 Get A/D value=-858993460 result=40 07:35:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:35:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:35:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:35:49 Aux= 07:35:49 Message to Camera, serial 4697 queued 07:35:51 Received message from Master: op=Shutter serial=4701 07:35:51 Shutter LASER close 07:35:52 Received message from Master: op=PointingHead serial=4705 07:35:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:35:52 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:35:52 Point started: ret=0 07:35:52 point_skyscan result=0 07:35:53 Check angles 07:35:53 SkyScan query 07:35:54 SkyScan query done: ret=0 az=89.535<-5969 ze=156.72<-1552 Statuses=0009 0009 07:35:54 Msec=0 True Az=89.535 Ze=156.72 Az status=0009 Ze status=0009 07:35:54 Check angles 07:35:54 SkyScan query 07:35:54 SkyScan query done: ret=0 az=71.91<-4794 ze=135.735<-2951 Statuses=0009 0009 07:35:54 Msec=750 True Az=71.91 Ze=135.735 Az status=0009 Ze status=0009 07:35:55 Check angles 07:35:55 SkyScan query 07:35:55 SkyScan query done: ret=0 az=54.57<-3638 ze=114.825<-4345 Statuses=0009 0009 07:35:55 Msec=1500 True Az=54.57 Ze=114.825 Az status=0009 Ze status=0009 07:35:55 Check angles 07:35:55 SkyScan query 07:35:56 SkyScan query done: ret=0 az=40.89<-2726 ze=93.84<-5744 Statuses=0009 0009 07:35:56 Msec=2250 True Az=40.89 Ze=93.84 Az status=0009 Ze status=0009 07:35:56 Check angles 07:35:56 SkyScan query 07:35:57 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 07:35:57 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 07:35:57 Check angles 07:35:57 SkyScan query 07:35:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 07:35:57 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 07:35:58 Check angles 07:35:58 SkyScan query 07:35:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:35:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:35:58 Message to Master queued w/err=0: serial=4705 error=0 07:36:03 Received message from Master: op=Filter serial=4706 07:36:03 Color wheel filter change from 0 to 0 07:36:03 FLIGetFilterPos err=0 currentPosition=0 07:36:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:03 Filter is already there-color wheel unchanged 07:36:03 Received message from Master: op=Shutter serial=4707 07:36:03 Shutter LASER close 07:36:03 Received message from Camera: op=State serial=4709 07:36:03 GetSingleValue result=40 Value=cccccccc 07:36:03 SkyScan query 07:36:04 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:04 Parameters OK 07:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:04 Set A/D data flow result=40 07:36:04 Set A/D channel type result=40 07:36:04 Set A/D encoding result=40 07:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:04 Set channel filter=0.000000e+000 result=40 07:36:04 Config A/D Result=40 07:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:04 Get A/D filter: -9.255963e+061 result=40 07:36:04 Get A/D value=-858993460 result=40 07:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:04 Parameters OK 07:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:04 Set A/D data flow result=40 07:36:04 Set A/D channel type result=40 07:36:04 Set A/D encoding result=40 07:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:04 Set channel filter=0.000000e+000 result=40 07:36:04 Config A/D Result=40 07:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:04 Get A/D filter: -9.255963e+061 result=40 07:36:04 Get A/D value=-858993460 result=40 07:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:04 Aux= 07:36:04 Message to Camera, serial 4709 queued 07:36:35 Received message from Master: op=PointingHead serial=4716 07:36:35 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:36:35 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:36:35 Point started: ret=0 07:36:35 point_skyscan result=0 07:36:36 Check angles 07:36:36 SkyScan query 07:36:37 SkyScan query done: ret=0 az=63.78<-4252 ze=66.555<-7563 Statuses=0009 0008 07:36:37 Msec=0 True Az=63.78 Ze=66.555 Az status=0009 Ze status=0008 07:36:37 Check angles 07:36:37 SkyScan query 07:36:37 SkyScan query done: ret=0 az=81.33<-5422 ze=66.51<-7566 Statuses=0009 0008 07:36:37 Msec=750 True Az=81.33 Ze=66.51 Az status=0009 Ze status=0008 07:36:38 Check angles 07:36:38 SkyScan query 07:36:38 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 07:36:38 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 07:36:38 Check angles 07:36:38 SkyScan query 07:36:39 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 07:36:39 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 07:36:39 Check angles 07:36:39 SkyScan query 07:36:40 SkyScan query done: ret=0 az=134.025<-8935 ze=66.495<-7567 Statuses=0009 0008 07:36:40 Msec=3000 True Az=134.025 Ze=66.495 Az status=0009 Ze status=0008 07:36:40 Check angles 07:36:40 SkyScan query 07:36:40 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 07:36:40 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 07:36:41 Check angles 07:36:41 SkyScan query 07:36:41 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:36:41 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:36:41 Message to Master queued w/err=0: serial=4716 error=0 07:36:46 Received message from Master: op=Filter serial=4717 07:36:46 Color wheel filter change from 0 to 0 07:36:46 FLIGetFilterPos err=0 currentPosition=0 07:36:46 FLIGetStepsRemaining err=0 RemainingSteps=0 07:36:46 Filter is already there-color wheel unchanged 07:36:46 Received message from Master: op=Shutter serial=4718 07:36:46 Shutter LASER close 07:36:46 Received message from Camera: op=State serial=4720 07:36:46 GetSingleValue result=40 Value=cccccccc 07:36:46 SkyScan query 07:36:47 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:36:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:47 Parameters OK 07:36:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:47 Set A/D data flow result=40 07:36:47 Set A/D channel type result=40 07:36:47 Set A/D encoding result=40 07:36:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:47 Set channel filter=0.000000e+000 result=40 07:36:47 Config A/D Result=40 07:36:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:47 Get A/D filter: -9.255963e+061 result=40 07:36:47 Get A/D value=-858993460 result=40 07:36:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:36:47 Parameters OK 07:36:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:36:47 Set A/D data flow result=40 07:36:47 Set A/D channel type result=40 07:36:47 Set A/D encoding result=40 07:36:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:36:47 Set channel filter=0.000000e+000 result=40 07:36:47 Config A/D Result=40 07:36:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:36:47 Get A/D filter: -9.255963e+061 result=40 07:36:47 Get A/D value=-858993460 result=40 07:36:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:36:47 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:36:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:36:47 Aux= 07:36:47 Message to Camera, serial 4720 queued 07:37:18 Received message from Master: op=PointingHead serial=4727 07:37:18 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:37:18 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:37:18 Point started: ret=0 07:37:18 point_skyscan result=0 07:37:19 Check angles 07:37:19 SkyScan query 07:37:19 SkyScan query done: ret=0 az=134.61<-8974 ze=36.21<-9586 Statuses=0009 0009 07:37:19 Msec=0 True Az=134.61 Ze=36.21 Az status=0009 Ze status=0009 07:37:20 Check angles 07:37:20 SkyScan query 07:37:20 SkyScan query done: ret=0 az=117.075<-7805 ze=15.27<-10982 Statuses=0009 0009 07:37:20 Msec=750 True Az=117.075 Ze=15.27 Az status=0009 Ze status=0009 07:37:20 Check angles 07:37:20 SkyScan query 07:37:21 SkyScan query done: ret=0 az=99.69<-6646 ze=-5.685<-12379 Statuses=0009 0009 07:37:21 Msec=1500 True Az=99.69 Ze=-5.685 Az status=0009 Ze status=0009 07:37:21 Check angles 07:37:21 SkyScan query 07:37:22 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.655<-13777 Statuses=0009 0009 07:37:22 Msec=2250 True Az=82.215 Ze=-26.655 Az status=0009 Ze status=0009 07:37:22 Check angles 07:37:22 SkyScan query 07:37:22 SkyScan query done: ret=0 az=64.71<-4314 ze=-38.565<-14571 Statuses=0009 0008 07:37:22 Msec=3000 True Az=64.71 Ze=-38.565 Az status=0009 Ze status=0008 07:37:23 Check angles 07:37:23 SkyScan query 07:37:23 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.535<-14569 Statuses=0009 0008 07:37:23 Msec=3750 True Az=47.265 Ze=-38.535 Az status=0009 Ze status=0008 07:37:23 Check angles 07:37:23 SkyScan query 07:37:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:37:24 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:37:24 Message to Master queued w/err=0: serial=4727 error=0 07:37:29 Received message from Master: op=Filter serial=4728 07:37:29 Color wheel filter change from 0 to 0 07:37:29 FLIGetFilterPos err=0 currentPosition=0 07:37:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:37:29 Filter is already there-color wheel unchanged 07:37:29 Received message from Master: op=Shutter serial=4729 07:37:29 Shutter LASER close 07:37:29 Received message from Camera: op=State serial=4731 07:37:29 GetSingleValue result=40 Value=cccccccc 07:37:29 SkyScan query 07:37:30 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:37:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:30 Parameters OK 07:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:30 Set A/D data flow result=40 07:37:30 Set A/D channel type result=40 07:37:30 Set A/D encoding result=40 07:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:30 Set channel filter=0.000000e+000 result=40 07:37:30 Config A/D Result=40 07:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:30 Get A/D filter: -9.255963e+061 result=40 07:37:30 Get A/D value=-858993460 result=40 07:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:37:30 Parameters OK 07:37:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:37:30 Set A/D data flow result=40 07:37:30 Set A/D channel type result=40 07:37:30 Set A/D encoding result=40 07:37:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:37:30 Set channel filter=0.000000e+000 result=40 07:37:30 Config A/D Result=40 07:37:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:37:30 Get A/D filter: -9.255963e+061 result=40 07:37:30 Get A/D value=-858993460 result=40 07:37:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:37:30 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:37:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:37:30 Aux= 07:37:30 Message to Camera, serial 4731 queued 07:38:01 Received message from Master: op=PointingHead serial=4738 07:38:01 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:38:01 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:38:01 Point started: ret=0 07:38:01 point_skyscan result=0 07:38:02 Check angles 07:38:02 SkyScan query 07:38:02 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.595<-16573 Statuses=0009 0009 07:38:02 Msec=0 True Az=64.17 Ze=-68.595 Az status=0009 Ze status=0009 07:38:02 Check angles 07:38:02 SkyScan query 07:38:03 SkyScan query done: ret=0 az=82.23<-5482 ze=-89.985<-17999 Statuses=0009 0009 07:38:03 Msec=750 True Az=82.23 Ze=-89.985 Az status=0009 Ze status=0009 07:38:03 Check angles 07:38:03 SkyScan query 07:38:04 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.925<-19395 Statuses=0009 0009 07:38:04 Msec=1500 True Az=99.585 Ze=-110.925 Az status=0009 Ze status=0009 07:38:04 Check angles 07:38:04 SkyScan query 07:38:05 SkyScan query done: ret=0 az=117.045<-7803 ze=-131.895<-20793 Statuses=0009 0009 07:38:05 Msec=2250 True Az=117.045 Ze=-131.895 Az status=0009 Ze status=0009 07:38:05 Check angles 07:38:05 SkyScan query 07:38:05 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 07:38:05 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 07:38:05 Check angles 07:38:05 SkyScan query 07:38:06 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:38:06 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:38:06 Message to Master queued w/err=0: serial=4738 error=0 07:38:11 Received message from Master: op=Filter serial=4739 07:38:11 Color wheel filter change from 0 to 0 07:38:11 FLIGetFilterPos err=0 currentPosition=0 07:38:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:11 Filter is already there-color wheel unchanged 07:38:11 Received message from Master: op=Shutter serial=4740 07:38:11 Shutter LASER close 07:38:11 Received message from Camera: op=State serial=4742 07:38:11 GetSingleValue result=40 Value=cccccccc 07:38:11 SkyScan query 07:38:12 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:38:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:12 Parameters OK 07:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:12 Set A/D data flow result=40 07:38:12 Set A/D channel type result=40 07:38:12 Set A/D encoding result=40 07:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:12 Set channel filter=0.000000e+000 result=40 07:38:12 Config A/D Result=40 07:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:12 Get A/D filter: -9.255963e+061 result=40 07:38:12 Get A/D value=-858993460 result=40 07:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:12 Parameters OK 07:38:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:12 Set A/D data flow result=40 07:38:12 Set A/D channel type result=40 07:38:12 Set A/D encoding result=40 07:38:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:12 Set channel filter=0.000000e+000 result=40 07:38:12 Config A/D Result=40 07:38:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:12 Get A/D filter: -9.255963e+061 result=40 07:38:12 Get A/D value=-858993460 result=40 07:38:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:12 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:12 Aux= 07:38:12 Message to Camera, serial 4742 queued 07:38:43 Received message from Master: op=PointingHead serial=4749 07:38:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:38:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:38:43 Point started: ret=0 07:38:43 point_skyscan result=0 07:38:44 Check angles 07:38:44 SkyScan query 07:38:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.345<-23423 Statuses=0009 0009 07:38:44 Msec=0 True Az=113.01 Ze=-171.345 Az status=0009 Ze status=0009 07:38:45 Check angles 07:38:45 SkyScan query 07:38:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:38:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:38:45 Message to Master queued w/err=0: serial=4749 error=0 07:38:50 Received message from Master: op=Filter serial=4750 07:38:50 Color wheel filter change from 0 to 0 07:38:50 FLIGetFilterPos err=0 currentPosition=0 07:38:50 FLIGetStepsRemaining err=0 RemainingSteps=0 07:38:50 Filter is already there-color wheel unchanged 07:38:50 Received message from Master: op=Shutter serial=4751 07:38:50 Shutter LASER open 07:38:50 Received message from Camera: op=State serial=4753 07:38:50 GetSingleValue result=40 Value=cccccccc 07:38:50 SkyScan query 07:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:38:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:51 Parameters OK 07:38:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:51 Set A/D data flow result=40 07:38:51 Set A/D channel type result=40 07:38:51 Set A/D encoding result=40 07:38:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:51 Set channel filter=0.000000e+000 result=40 07:38:51 Config A/D Result=40 07:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:51 Get A/D filter: -9.255963e+061 result=40 07:38:51 Get A/D value=-858993460 result=40 07:38:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:38:51 Parameters OK 07:38:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:38:51 Set A/D data flow result=40 07:38:51 Set A/D channel type result=40 07:38:51 Set A/D encoding result=40 07:38:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:38:51 Set channel filter=0.000000e+000 result=40 07:38:51 Config A/D Result=40 07:38:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:38:51 Get A/D filter: -9.255963e+061 result=40 07:38:51 Get A/D value=-858993460 result=40 07:38:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:38:51 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:38:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:38:51 Aux= 07:38:51 Message to Camera, serial 4753 queued 07:38:53 Received message from Master: op=Shutter serial=4757 07:38:53 Shutter LASER close 07:38:54 Received message from Master: op=PointingHead serial=4761 07:38:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:38:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:38:54 Point started: ret=0 07:38:54 point_skyscan result=0 07:38:55 Check angles 07:38:55 SkyScan query 07:38:56 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.28<-21552 Statuses=0009 0009 07:38:56 Msec=0 True Az=135.96 Ze=-143.28 Az status=0009 Ze status=0009 07:38:56 Check angles 07:38:56 SkyScan query 07:38:56 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.31<-20154 Statuses=0009 0009 07:38:56 Msec=750 True Az=153.42 Ze=-122.31 Az status=0009 Ze status=0009 07:38:57 Check angles 07:38:57 SkyScan query 07:38:57 SkyScan query done: ret=0 az=170.805<-11387 ze=-101.385<-18759 Statuses=0009 0009 07:38:57 Msec=1500 True Az=170.805 Ze=-101.385 Az status=0009 Ze status=0009 07:38:57 Check angles 07:38:57 SkyScan query 07:38:58 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.43<-17362 Statuses=0008 0009 07:38:58 Msec=2250 True Az=176.025 Ze=-80.43 Az status=0008 Ze status=0009 07:38:58 Check angles 07:38:58 SkyScan query 07:38:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.46<-15964 Statuses=0008 0009 07:38:59 Msec=3000 True Az=175.995 Ze=-59.46 Az status=0008 Ze status=0009 07:38:59 Check angles 07:38:59 SkyScan query 07:38:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:38:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:38:59 Message to Master queued w/err=0: serial=4761 error=0 07:39:04 Received message from Master: op=Filter serial=4762 07:39:04 Color wheel filter change from 0 to 0 07:39:04 FLIGetFilterPos err=0 currentPosition=0 07:39:04 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:04 Filter is already there-color wheel unchanged 07:39:05 Received message from Master: op=Shutter serial=4763 07:39:05 Shutter LASER close 07:39:05 Received message from Camera: op=State serial=4765 07:39:05 GetSingleValue result=40 Value=cccccccc 07:39:05 SkyScan query 07:39:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:39:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:05 Parameters OK 07:39:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:05 Set A/D data flow result=40 07:39:05 Set A/D channel type result=40 07:39:05 Set A/D encoding result=40 07:39:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:05 Set channel filter=0.000000e+000 result=40 07:39:05 Config A/D Result=40 07:39:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:05 Get A/D filter: -9.255963e+061 result=40 07:39:05 Get A/D value=-858993460 result=40 07:39:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:05 Parameters OK 07:39:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:05 Set A/D data flow result=40 07:39:05 Set A/D channel type result=40 07:39:05 Set A/D encoding result=40 07:39:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:05 Set channel filter=0.000000e+000 result=40 07:39:05 Config A/D Result=40 07:39:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:05 Get A/D filter: -9.255963e+061 result=40 07:39:05 Get A/D value=-858993460 result=40 07:39:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:05 Aux= 07:39:05 Message to Camera, serial 4765 queued 07:39:36 Received message from Master: op=PointingHead serial=4772 07:39:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:39:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:39:37 Point started: ret=0 07:39:37 point_skyscan result=0 07:39:37 Check angles 07:39:37 SkyScan query 07:39:38 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.78<-13452 Statuses=0009 0009 07:39:38 Msec=0 True Az=152.97 Ze=-21.78 Az status=0009 Ze status=0009 07:39:38 Check angles 07:39:38 SkyScan query 07:39:39 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.84<-12056 Statuses=0009 0009 07:39:39 Msec=750 True Az=135.63 Ze=-0.84 Az status=0009 Ze status=0009 07:39:39 Check angles 07:39:39 SkyScan query 07:39:39 SkyScan query done: ret=0 az=118.065<-7871 ze=20.145<-10657 Statuses=0009 0009 07:39:39 Msec=1500 True Az=118.065 Ze=20.145 Az status=0009 Ze status=0009 07:39:40 Check angles 07:39:40 SkyScan query 07:39:40 SkyScan query done: ret=0 az=100.635<-6709 ze=41.085<-9261 Statuses=0009 0009 07:39:40 Msec=2250 True Az=100.635 Ze=41.085 Az status=0009 Ze status=0009 07:39:40 Check angles 07:39:40 SkyScan query 07:39:41 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 07:39:41 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 07:39:41 Check angles 07:39:41 SkyScan query 07:39:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:39:42 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:39:42 Message to Master queued w/err=0: serial=4772 error=0 07:39:47 Received message from Master: op=Filter serial=4773 07:39:47 Color wheel filter change from 0 to 0 07:39:47 FLIGetFilterPos err=0 currentPosition=0 07:39:47 FLIGetStepsRemaining err=0 RemainingSteps=0 07:39:47 Filter is already there-color wheel unchanged 07:39:47 Received message from Master: op=Shutter serial=4774 07:39:47 Shutter LASER close 07:39:47 Received message from Camera: op=State serial=4776 07:39:47 GetSingleValue result=40 Value=cccccccc 07:39:47 SkyScan query 07:39:48 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:39:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:48 Parameters OK 07:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:48 Set A/D data flow result=40 07:39:48 Set A/D channel type result=40 07:39:48 Set A/D encoding result=40 07:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:48 Set channel filter=0.000000e+000 result=40 07:39:48 Config A/D Result=40 07:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:48 Get A/D filter: -9.255963e+061 result=40 07:39:48 Get A/D value=-858993460 result=40 07:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:39:48 Parameters OK 07:39:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:39:48 Set A/D data flow result=40 07:39:48 Set A/D channel type result=40 07:39:48 Set A/D encoding result=40 07:39:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:39:48 Set channel filter=0.000000e+000 result=40 07:39:48 Config A/D Result=40 07:39:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:39:48 Get A/D filter: -9.255963e+061 result=40 07:39:48 Get A/D value=-858993460 result=40 07:39:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:39:48 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:39:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:39:48 Aux= 07:39:48 Message to Camera, serial 4776 queued 07:40:18 Received message from Master: op=PointingHead serial=4783 07:40:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:40:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:40:19 Point started: ret=0 07:40:19 point_skyscan result=0 07:40:19 Check angles 07:40:19 SkyScan query 07:40:20 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 07:40:20 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 07:40:20 Check angles 07:40:20 SkyScan query 07:40:21 SkyScan query done: ret=0 az=126.27<-8418 ze=38.505<-9433 Statuses=0009 0008 07:40:21 Msec=750 True Az=126.27 Ze=38.505 Az status=0009 Ze status=0008 07:40:21 Check angles 07:40:21 SkyScan query 07:40:22 SkyScan query done: ret=0 az=143.76<-9584 ze=38.505<-9433 Statuses=0009 0008 07:40:22 Msec=1500 True Az=143.76 Ze=38.505 Az status=0009 Ze status=0008 07:40:22 Check angles 07:40:22 SkyScan query 07:40:22 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 07:40:22 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 07:40:23 Check angles 07:40:23 SkyScan query 07:40:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:40:23 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:40:23 Check angles 07:40:23 SkyScan query 07:40:24 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:40:24 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:40:24 Message to Master queued w/err=0: serial=4783 error=0 07:40:29 Received message from Master: op=Filter serial=4784 07:40:29 Color wheel filter change from 0 to 0 07:40:29 FLIGetFilterPos err=0 currentPosition=0 07:40:29 FLIGetStepsRemaining err=0 RemainingSteps=0 07:40:29 Filter is already there-color wheel unchanged 07:40:29 Received message from Master: op=Shutter serial=4785 07:40:29 Shutter LASER close 07:40:29 Received message from Camera: op=State serial=4787 07:40:29 GetSingleValue result=40 Value=cccccccc 07:40:29 SkyScan query 07:40:30 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:40:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:30 Parameters OK 07:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:30 Set A/D data flow result=40 07:40:30 Set A/D channel type result=40 07:40:30 Set A/D encoding result=40 07:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:30 Set channel filter=0.000000e+000 result=40 07:40:30 Config A/D Result=40 07:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:30 Get A/D filter: -9.255963e+061 result=40 07:40:30 Get A/D value=-858993460 result=40 07:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:40:30 Parameters OK 07:40:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:40:30 Set A/D data flow result=40 07:40:30 Set A/D channel type result=40 07:40:30 Set A/D encoding result=40 07:40:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:40:30 Set channel filter=0.000000e+000 result=40 07:40:30 Config A/D Result=40 07:40:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:40:30 Get A/D filter: -9.255963e+061 result=40 07:40:30 Get A/D value=-858993460 result=40 07:40:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:40:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:40:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:40:30 Aux= 07:40:30 Message to Camera, serial 4787 queued 07:41:01 Received message from Master: op=PointingHead serial=4794 07:41:01 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:41:01 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:41:01 Point started: ret=0 07:41:01 point_skyscan result=0 07:41:02 Check angles 07:41:02 SkyScan query 07:41:02 SkyScan query done: ret=0 az=152.985<-10199 ze=8.715<-11419 Statuses=0009 0009 07:41:02 Msec=0 True Az=152.985 Ze=8.715 Az status=0009 Ze status=0009 07:41:02 Check angles 07:41:02 SkyScan query 07:41:03 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.225<-12815 Statuses=0009 0009 07:41:03 Msec=750 True Az=135.6 Ze=-12.225 Az status=0009 Ze status=0009 07:41:03 Check angles 07:41:03 SkyScan query 07:41:04 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.165<-14211 Statuses=0009 0009 07:41:04 Msec=1500 True Az=118.095 Ze=-33.165 Az status=0009 Ze status=0009 07:41:04 Check angles 07:41:04 SkyScan query [UTC 2018-12-4 07:41:04] 07:41:04 SkyScan query done: ret=0 az=100.665<-6711 ze=-51.525<-15435 Statuses=0009 0009 07:41:04 Msec=2250 True Az=100.665 Ze=-51.525 Az status=0009 Ze status=0009 07:41:05 Check angles 07:41:05 SkyScan query 07:41:05 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 07:41:05 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 07:41:05 Check angles 07:41:05 SkyScan query 07:41:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:41:06 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:41:06 Message to Master queued w/err=0: serial=4794 error=0 07:41:11 Received message from Master: op=Filter serial=4795 07:41:11 Color wheel filter change from 0 to 0 07:41:11 FLIGetFilterPos err=0 currentPosition=0 07:41:11 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:11 Filter is already there-color wheel unchanged 07:41:11 Received message from Master: op=Shutter serial=4796 07:41:11 Shutter LASER close 07:41:11 Received message from Camera: op=State serial=4798 07:41:11 GetSingleValue result=40 Value=cccccccc 07:41:11 SkyScan query 07:41:12 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:41:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:12 Parameters OK 07:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:12 Set A/D data flow result=40 07:41:12 Set A/D channel type result=40 07:41:12 Set A/D encoding result=40 07:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:12 Set channel filter=0.000000e+000 result=40 07:41:12 Config A/D Result=40 07:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:12 Get A/D filter: -9.255963e+061 result=40 07:41:12 Get A/D value=-858993460 result=40 07:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:12 Parameters OK 07:41:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:12 Set A/D data flow result=40 07:41:12 Set A/D channel type result=40 07:41:12 Set A/D encoding result=40 07:41:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:12 Set channel filter=0.000000e+000 result=40 07:41:12 Config A/D Result=40 07:41:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:12 Get A/D filter: -9.255963e+061 result=40 07:41:12 Get A/D value=-858993460 result=40 07:41:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:12 Aux= 07:41:12 Message to Camera, serial 4798 queued 07:41:43 Received message from Master: op=PointingHead serial=4805 07:41:43 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:41:43 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:41:43 Point started: ret=0 07:41:43 point_skyscan result=0 07:41:44 Check angles 07:41:44 SkyScan query 07:41:44 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.375<-17425 Statuses=0009 0009 07:41:44 Msec=0 True Az=109.02 Ze=-81.375 Az status=0009 Ze status=0009 07:41:44 Check angles 07:41:44 SkyScan query 07:41:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 07:41:45 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 07:41:45 Check angles 07:41:45 SkyScan query 07:41:46 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.27<-20218 Statuses=0008 0009 07:41:46 Msec=1500 True Az=113.01 Ze=-123.27 Az status=0008 Ze status=0009 07:41:46 Check angles 07:41:46 SkyScan query 07:41:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.21<-21614 Statuses=0008 0009 07:41:46 Msec=2250 True Az=112.995 Ze=-144.21 Az status=0008 Ze status=0009 07:41:47 Check angles 07:41:47 SkyScan query 07:41:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.18<-23012 Statuses=0008 0009 07:41:47 Msec=3000 True Az=112.995 Ze=-165.18 Az status=0008 Ze status=0009 07:41:47 Check angles 07:41:47 SkyScan query 07:41:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 07:41:48 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 07:41:48 Message to Master queued w/err=0: serial=4805 error=0 07:41:53 Received message from Master: op=Filter serial=4806 07:41:53 Color wheel filter change from 0 to 0 07:41:53 FLIGetFilterPos err=0 currentPosition=0 07:41:53 FLIGetStepsRemaining err=0 RemainingSteps=0 07:41:53 Filter is already there-color wheel unchanged 07:41:53 Received message from Master: op=Shutter serial=4807 07:41:53 Shutter LASER open 07:41:53 Received message from Camera: op=State serial=4809 07:41:53 GetSingleValue result=40 Value=cccccccc 07:41:53 SkyScan query 07:41:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:41:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:54 Parameters OK 07:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:54 Set A/D data flow result=40 07:41:54 Set A/D channel type result=40 07:41:54 Set A/D encoding result=40 07:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:54 Set channel filter=0.000000e+000 result=40 07:41:54 Config A/D Result=40 07:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:54 Get A/D filter: -9.255963e+061 result=40 07:41:54 Get A/D value=-858993460 result=40 07:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:41:54 Parameters OK 07:41:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:41:54 Set A/D data flow result=40 07:41:54 Set A/D channel type result=40 07:41:54 Set A/D encoding result=40 07:41:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:41:54 Set channel filter=0.000000e+000 result=40 07:41:54 Config A/D Result=40 07:41:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:41:54 Get A/D filter: -9.255963e+061 result=40 07:41:54 Get A/D value=-858993460 result=40 07:41:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:41:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:41:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:41:54 Aux= 07:41:54 Message to Camera, serial 4809 queued 07:41:56 Received message from Master: op=Shutter serial=4813 07:41:56 Shutter LASER close 07:41:57 Received message from Master: op=PointingHead serial=4817 07:41:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:41:57 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:41:57 Point started: ret=0 07:41:57 point_skyscan result=0 07:41:58 Check angles 07:41:58 SkyScan query 07:41:58 SkyScan query done: ret=0 az=89.7<-5980 ze=157.065<-1529 Statuses=0009 0009 07:41:58 Msec=0 True Az=89.7 Ze=157.065 Az status=0009 Ze status=0009 07:41:59 Check angles 07:41:59 SkyScan query 07:41:59 SkyScan query done: ret=0 az=72.375<-4825 ze=136.095<-2927 Statuses=0009 0009 07:41:59 Msec=750 True Az=72.375 Ze=136.095 Az status=0009 Ze status=0009 07:41:59 Check angles 07:41:59 SkyScan query 07:42:00 SkyScan query done: ret=0 az=54.795<-3653 ze=115.155<-4323 Statuses=0009 0009 07:42:00 Msec=1500 True Az=54.795 Ze=115.155 Az status=0009 Ze status=0009 07:42:00 Check angles 07:42:00 SkyScan query 07:42:01 SkyScan query done: ret=0 az=40.86<-2724 ze=94.185<-5721 Statuses=0009 0009 07:42:01 Msec=2250 True Az=40.86 Ze=94.185 Az status=0009 Ze status=0009 07:42:01 Check angles 07:42:01 SkyScan query 07:42:01 SkyScan query done: ret=0 az=40.995<-2733 ze=73.23<-7118 Statuses=0008 0009 07:42:01 Msec=3000 True Az=40.995 Ze=73.23 Az status=0008 Ze status=0009 07:42:02 Check angles 07:42:02 SkyScan query 07:42:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 07:42:02 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 07:42:02 Check angles 07:42:02 SkyScan query 07:42:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:42:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:42:03 Message to Master queued w/err=0: serial=4817 error=0 07:42:08 Received message from Master: op=Filter serial=4818 07:42:08 Color wheel filter change from 0 to 0 07:42:08 FLIGetFilterPos err=0 currentPosition=0 07:42:08 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:08 Filter is already there-color wheel unchanged 07:42:08 Received message from Master: op=Shutter serial=4819 07:42:08 Shutter LASER close 07:42:08 Received message from Camera: op=State serial=4821 07:42:08 GetSingleValue result=40 Value=cccccccc 07:42:08 SkyScan query 07:42:09 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:42:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:09 Parameters OK 07:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:09 Set A/D data flow result=40 07:42:09 Set A/D channel type result=40 07:42:09 Set A/D encoding result=40 07:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:09 Set channel filter=0.000000e+000 result=40 07:42:09 Config A/D Result=40 07:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:09 Get A/D filter: -9.255963e+061 result=40 07:42:09 Get A/D value=-858993460 result=40 07:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:09 Parameters OK 07:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:09 Set A/D data flow result=40 07:42:09 Set A/D channel type result=40 07:42:09 Set A/D encoding result=40 07:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:09 Set channel filter=0.000000e+000 result=40 07:42:09 Config A/D Result=40 07:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:09 Get A/D filter: -9.255963e+061 result=40 07:42:09 Get A/D value=-858993460 result=40 07:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:09 Aux= 07:42:09 Message to Camera, serial 4821 queued 07:42:40 Received message from Master: op=PointingHead serial=4828 07:42:40 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:42:40 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:42:40 Point started: ret=0 07:42:40 point_skyscan result=0 07:42:41 Check angles 07:42:41 SkyScan query 07:42:41 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 07:42:41 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 07:42:42 Check angles 07:42:42 SkyScan query 07:42:42 SkyScan query done: ret=0 az=81.48<-5432 ze=66.495<-7567 Statuses=0009 0008 07:42:42 Msec=750 True Az=81.48 Ze=66.495 Az status=0009 Ze status=0008 07:42:42 Check angles 07:42:42 SkyScan query 07:42:43 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 07:42:43 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 07:42:43 Check angles 07:42:43 SkyScan query 07:42:44 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 07:42:44 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 07:42:44 Check angles 07:42:44 SkyScan query 07:42:44 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 07:42:44 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 07:42:45 Check angles 07:42:45 SkyScan query 07:42:45 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 07:42:45 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 07:42:45 Check angles 07:42:45 SkyScan query 07:42:46 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:42:46 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:42:46 Message to Master queued w/err=0: serial=4828 error=0 07:42:51 Received message from Master: op=Filter serial=4829 07:42:51 Color wheel filter change from 0 to 0 07:42:51 FLIGetFilterPos err=0 currentPosition=0 07:42:51 FLIGetStepsRemaining err=0 RemainingSteps=0 07:42:51 Filter is already there-color wheel unchanged 07:42:51 Received message from Master: op=Shutter serial=4830 07:42:51 Shutter LASER close 07:42:51 Received message from Camera: op=State serial=4832 07:42:51 GetSingleValue result=40 Value=cccccccc 07:42:51 SkyScan query 07:42:52 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:42:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:52 Parameters OK 07:42:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:52 Set A/D data flow result=40 07:42:52 Set A/D channel type result=40 07:42:52 Set A/D encoding result=40 07:42:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:52 Set channel filter=0.000000e+000 result=40 07:42:52 Config A/D Result=40 07:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:52 Get A/D filter: -9.255963e+061 result=40 07:42:52 Get A/D value=-858993460 result=40 07:42:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:42:52 Parameters OK 07:42:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:42:52 Set A/D data flow result=40 07:42:52 Set A/D channel type result=40 07:42:52 Set A/D encoding result=40 07:42:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:42:52 Set channel filter=0.000000e+000 result=40 07:42:52 Config A/D Result=40 07:42:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:42:52 Get A/D filter: -9.255963e+061 result=40 07:42:52 Get A/D value=-858993460 result=40 07:42:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:42:52 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:42:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:42:52 Aux= 07:42:52 Message to Camera, serial 4832 queued 07:43:23 Received message from Master: op=PointingHead serial=4839 07:43:23 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:43:23 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:43:23 Point started: ret=0 07:43:23 point_skyscan result=0 07:43:24 Check angles 07:43:24 SkyScan query 07:43:24 SkyScan query done: ret=0 az=134.865<-8991 ze=36.525<-9565 Statuses=0009 0009 07:43:24 Msec=0 True Az=134.865 Ze=36.525 Az status=0009 Ze status=0009 07:43:24 Check angles 07:43:24 SkyScan query 07:43:25 SkyScan query done: ret=0 az=116.985<-7799 ze=15.15<-10990 Statuses=0009 0009 07:43:25 Msec=750 True Az=116.985 Ze=15.15 Az status=0009 Ze status=0009 07:43:25 Check angles 07:43:25 SkyScan query 07:43:26 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.82<-12388 Statuses=0009 0009 07:43:26 Msec=1500 True Az=99.6 Ze=-5.82 Az status=0009 Ze status=0009 07:43:26 Check angles 07:43:26 SkyScan query 07:43:26 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.79<-13786 Statuses=0009 0009 07:43:26 Msec=2250 True Az=82.155 Ze=-26.79 Az status=0009 Ze status=0009 07:43:27 Check angles 07:43:27 SkyScan query 07:43:27 SkyScan query done: ret=0 az=64.215<-4281 ze=-38.565<-14571 Statuses=0009 0008 07:43:27 Msec=3000 True Az=64.215 Ze=-38.565 Az status=0009 Ze status=0008 07:43:27 Check angles 07:43:27 SkyScan query 07:43:28 SkyScan query done: ret=0 az=46.5<-3100 ze=-38.535<-14569 Statuses=0009 0008 07:43:28 Msec=3750 True Az=46.5 Ze=-38.535 Az status=0009 Ze status=0008 07:43:28 Check angles 07:43:28 SkyScan query 07:43:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:43:29 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:43:29 Message to Master queued w/err=0: serial=4839 error=0 07:43:34 Received message from Master: op=Filter serial=4840 07:43:34 Color wheel filter change from 0 to 0 07:43:34 FLIGetFilterPos err=0 currentPosition=0 07:43:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:43:34 Filter is already there-color wheel unchanged 07:43:34 Received message from Master: op=Shutter serial=4841 07:43:34 Shutter LASER close 07:43:34 Received message from Camera: op=State serial=4843 07:43:34 GetSingleValue result=40 Value=cccccccc 07:43:34 SkyScan query 07:43:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:43:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:35 Parameters OK 07:43:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:35 Set A/D data flow result=40 07:43:35 Set A/D channel type result=40 07:43:35 Set A/D encoding result=40 07:43:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:35 Set channel filter=0.000000e+000 result=40 07:43:35 Config A/D Result=40 07:43:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:35 Get A/D filter: -9.255963e+061 result=40 07:43:35 Get A/D value=-858993460 result=40 07:43:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:43:35 Parameters OK 07:43:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:43:35 Set A/D data flow result=40 07:43:35 Set A/D channel type result=40 07:43:35 Set A/D encoding result=40 07:43:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:43:35 Set channel filter=0.000000e+000 result=40 07:43:35 Config A/D Result=40 07:43:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:43:35 Get A/D filter: -9.255963e+061 result=40 07:43:35 Get A/D value=-858993460 result=40 07:43:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:43:35 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:43:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:43:35 Aux= 07:43:35 Message to Camera, serial 4843 queued 07:44:05 Received message from Master: op=PointingHead serial=4850 07:44:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:44:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:44:06 Point started: ret=0 07:44:06 point_skyscan result=0 07:44:07 Check angles 07:44:07 SkyScan query 07:44:07 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.415<-16561 Statuses=0009 0009 07:44:07 Msec=0 True Az=63.99 Ze=-68.415 Az status=0009 Ze status=0009 07:44:07 Check angles 07:44:07 SkyScan query 07:44:08 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.385<-17959 Statuses=0009 0009 07:44:08 Msec=750 True Az=81.54 Ze=-89.385 Az status=0009 Ze status=0009 07:44:08 Check angles 07:44:08 SkyScan query 07:44:09 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.34<-19356 Statuses=0009 0009 07:44:09 Msec=1500 True Az=99.15 Ze=-110.34 Az status=0009 Ze status=0009 07:44:09 Check angles 07:44:09 SkyScan query 07:44:09 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.325<-20755 Statuses=0009 0009 07:44:09 Msec=2250 True Az=116.52 Ze=-131.325 Az status=0009 Ze status=0009 07:44:10 Check angles 07:44:10 SkyScan query 07:44:10 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 07:44:10 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 07:44:10 Check angles 07:44:10 SkyScan query 07:44:11 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:44:11 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:44:11 Message to Master queued w/err=0: serial=4850 error=0 07:44:16 Received message from Master: op=Filter serial=4851 07:44:16 Color wheel filter change from 0 to 0 07:44:16 FLIGetFilterPos err=0 currentPosition=0 07:44:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:16 Filter is already there-color wheel unchanged 07:44:16 Received message from Master: op=Shutter serial=4852 07:44:16 Shutter LASER close 07:44:16 Received message from Camera: op=State serial=4854 07:44:16 GetSingleValue result=40 Value=cccccccc 07:44:16 SkyScan query 07:44:17 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:44:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:17 Parameters OK 07:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:17 Set A/D data flow result=40 07:44:17 Set A/D channel type result=40 07:44:17 Set A/D encoding result=40 07:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:17 Set channel filter=0.000000e+000 result=40 07:44:17 Config A/D Result=40 07:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:17 Get A/D filter: -9.255963e+061 result=40 07:44:17 Get A/D value=-858993460 result=40 07:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:17 Parameters OK 07:44:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:17 Set A/D data flow result=40 07:44:17 Set A/D channel type result=40 07:44:17 Set A/D encoding result=40 07:44:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:17 Set channel filter=0.000000e+000 result=40 07:44:17 Config A/D Result=40 07:44:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:17 Get A/D filter: -9.255963e+061 result=40 07:44:17 Get A/D value=-858993460 result=40 07:44:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:17 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:17 Aux= 07:44:17 Message to Camera, serial 4854 queued 07:44:47 Received message from Master: op=PointingHead serial=4861 07:44:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:44:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:44:48 Point started: ret=0 07:44:48 point_skyscan result=0 07:44:49 Check angles 07:44:49 SkyScan query 07:44:49 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.225<-23415 Statuses=0009 0009 07:44:49 Msec=0 True Az=113.025 Ze=-171.225 Az status=0009 Ze status=0009 07:44:49 Check angles 07:44:49 SkyScan query 07:44:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:44:50 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:44:50 Message to Master queued w/err=0: serial=4861 error=0 07:44:55 Received message from Master: op=Filter serial=4862 07:44:55 Color wheel filter change from 0 to 0 07:44:55 FLIGetFilterPos err=0 currentPosition=0 07:44:55 FLIGetStepsRemaining err=0 RemainingSteps=0 07:44:55 Filter is already there-color wheel unchanged 07:44:55 Received message from Master: op=Shutter serial=4863 07:44:55 Shutter LASER open 07:44:55 Received message from Camera: op=State serial=4865 07:44:55 GetSingleValue result=40 Value=cccccccc 07:44:55 SkyScan query 07:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:44:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:56 Parameters OK 07:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:56 Set A/D data flow result=40 07:44:56 Set A/D channel type result=40 07:44:56 Set A/D encoding result=40 07:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:56 Set channel filter=0.000000e+000 result=40 07:44:56 Config A/D Result=40 07:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:56 Get A/D filter: -9.255963e+061 result=40 07:44:56 Get A/D value=-858993460 result=40 07:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:44:56 Parameters OK 07:44:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:44:56 Set A/D data flow result=40 07:44:56 Set A/D channel type result=40 07:44:56 Set A/D encoding result=40 07:44:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:44:56 Set channel filter=0.000000e+000 result=40 07:44:56 Config A/D Result=40 07:44:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:44:56 Get A/D filter: -9.255963e+061 result=40 07:44:56 Get A/D value=-858993460 result=40 07:44:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:44:56 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:44:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:44:56 Aux= 07:44:56 Message to Camera, serial 4865 queued 07:44:58 Received message from Master: op=Shutter serial=4869 07:44:58 Shutter LASER close 07:44:59 Received message from Master: op=PointingHead serial=4873 07:44:59 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:44:59 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:44:59 Point started: ret=0 07:44:59 point_skyscan result=0 07:45:00 Check angles 07:45:00 SkyScan query 07:45:01 SkyScan query done: ret=0 az=136.245<-9083 ze=-142.92<-21528 Statuses=0009 0009 07:45:01 Msec=0 True Az=136.245 Ze=-142.92 Az status=0009 Ze status=0009 07:45:01 Check angles 07:45:01 SkyScan query 07:45:01 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.965<-20131 Statuses=0009 0009 07:45:01 Msec=750 True Az=153.825 Ze=-121.965 Az status=0009 Ze status=0009 07:45:02 Check angles 07:45:02 SkyScan query 07:45:02 SkyScan query done: ret=0 az=171.21<-11414 ze=-101.025<-18735 Statuses=0009 0009 07:45:02 Msec=1500 True Az=171.21 Ze=-101.025 Az status=0009 Ze status=0009 07:45:02 Check angles 07:45:02 SkyScan query 07:45:03 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 07:45:03 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 07:45:03 Check angles 07:45:03 SkyScan query 07:45:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.215<-15881 Statuses=0008 0009 07:45:04 Msec=3000 True Az=175.995 Ze=-58.215 Az status=0008 Ze status=0009 07:45:04 Check angles 07:45:04 SkyScan query 07:45:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:45:04 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:45:04 Message to Master queued w/err=0: serial=4873 error=0 07:45:09 Received message from Master: op=Filter serial=4874 07:45:09 Color wheel filter change from 0 to 0 07:45:09 FLIGetFilterPos err=0 currentPosition=0 07:45:09 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:09 Filter is already there-color wheel unchanged 07:45:10 Received message from Master: op=Shutter serial=4875 07:45:10 Shutter LASER close 07:45:10 Received message from Camera: op=State serial=4877 07:45:10 GetSingleValue result=40 Value=cccccccc 07:45:10 SkyScan query 07:45:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:45:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:10 Parameters OK 07:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:10 Set A/D data flow result=40 07:45:10 Set A/D channel type result=40 07:45:10 Set A/D encoding result=40 07:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:10 Set channel filter=0.000000e+000 result=40 07:45:10 Config A/D Result=40 07:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:10 Get A/D filter: -9.255963e+061 result=40 07:45:10 Get A/D value=-858993460 result=40 07:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:10 Parameters OK 07:45:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:10 Set A/D data flow result=40 07:45:10 Set A/D channel type result=40 07:45:10 Set A/D encoding result=40 07:45:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:10 Set channel filter=0.000000e+000 result=40 07:45:10 Config A/D Result=40 07:45:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:10 Get A/D filter: -9.255963e+061 result=40 07:45:10 Get A/D value=-858993460 result=40 07:45:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:10 Aux= 07:45:10 Message to Camera, serial 4877 queued 07:45:41 Received message from Master: op=PointingHead serial=4884 07:45:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:45:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:45:41 Point started: ret=0 07:45:41 point_skyscan result=0 07:45:42 Check angles 07:45:42 SkyScan query 07:45:43 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 07:45:43 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 07:45:43 Check angles 07:45:43 SkyScan query 07:45:44 SkyScan query done: ret=0 az=135.72<-9048 ze=-1.005<-12067 Statuses=0009 0009 07:45:44 Msec=750 True Az=135.72 Ze=-1.005 Az status=0009 Ze status=0009 07:45:44 Check angles 07:45:44 SkyScan query 07:45:44 SkyScan query done: ret=0 az=118.26<-7884 ze=19.95<-10670 Statuses=0009 0009 07:45:44 Msec=1500 True Az=118.26 Ze=19.95 Az status=0009 Ze status=0009 07:45:44 Check angles 07:45:44 SkyScan query 07:45:45 SkyScan query done: ret=0 az=100.815<-6721 ze=40.905<-9273 Statuses=0009 0009 07:45:45 Msec=2250 True Az=100.815 Ze=40.905 Az status=0009 Ze status=0009 07:45:45 Check angles 07:45:45 SkyScan query 07:45:46 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:45:46 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:45:46 Check angles 07:45:46 SkyScan query 07:45:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:45:47 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:45:47 Message to Master queued w/err=0: serial=4884 error=0 07:45:52 Received message from Master: op=Filter serial=4885 07:45:52 Color wheel filter change from 0 to 0 07:45:52 FLIGetFilterPos err=0 currentPosition=0 07:45:52 FLIGetStepsRemaining err=0 RemainingSteps=0 07:45:52 Filter is already there-color wheel unchanged 07:45:52 Received message from Master: op=Shutter serial=4886 07:45:52 Shutter LASER close 07:45:52 Received message from Camera: op=State serial=4888 07:45:52 GetSingleValue result=40 Value=cccccccc 07:45:52 SkyScan query 07:45:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:45:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:52 Parameters OK 07:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:52 Set A/D data flow result=40 07:45:52 Set A/D channel type result=40 07:45:52 Set A/D encoding result=40 07:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:52 Set channel filter=0.000000e+000 result=40 07:45:52 Config A/D Result=40 07:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:52 Get A/D filter: -9.255963e+061 result=40 07:45:52 Get A/D value=-858993460 result=40 07:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:45:52 Parameters OK 07:45:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:45:52 Set A/D data flow result=40 07:45:52 Set A/D channel type result=40 07:45:52 Set A/D encoding result=40 07:45:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:45:52 Set channel filter=0.000000e+000 result=40 07:45:52 Config A/D Result=40 07:45:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:45:52 Get A/D filter: -9.255963e+061 result=40 07:45:52 Get A/D value=-858993460 result=40 07:45:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:45:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:45:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:45:52 Aux= 07:45:52 Message to Camera, serial 4888 queued 07:46:23 Received message from Master: op=PointingHead serial=4895 07:46:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:46:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:46:24 Point started: ret=0 07:46:24 point_skyscan result=0 07:46:24 Check angles 07:46:24 SkyScan query 07:46:25 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 07:46:25 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 07:46:25 Check angles 07:46:25 SkyScan query 07:46:26 SkyScan query done: ret=0 az=126.9<-8460 ze=38.505<-9433 Statuses=0009 0008 07:46:26 Msec=750 True Az=126.9 Ze=38.505 Az status=0009 Ze status=0008 07:46:26 Check angles 07:46:26 SkyScan query 07:46:26 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 07:46:26 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 07:46:27 Check angles 07:46:27 SkyScan query 07:46:27 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 07:46:27 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 07:46:27 Check angles 07:46:27 SkyScan query 07:46:28 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:46:28 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:46:28 Check angles 07:46:28 SkyScan query 07:46:29 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:46:29 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:46:29 Message to Master queued w/err=0: serial=4895 error=0 07:46:34 Received message from Master: op=Filter serial=4896 07:46:34 Color wheel filter change from 0 to 0 07:46:34 FLIGetFilterPos err=0 currentPosition=0 07:46:34 FLIGetStepsRemaining err=0 RemainingSteps=0 07:46:34 Filter is already there-color wheel unchanged 07:46:34 Received message from Master: op=Shutter serial=4897 07:46:34 Shutter LASER close 07:46:34 Received message from Camera: op=State serial=4899 07:46:34 GetSingleValue result=40 Value=cccccccc 07:46:34 SkyScan query 07:46:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:46:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:34 Parameters OK 07:46:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:34 Set A/D data flow result=40 07:46:34 Set A/D channel type result=40 07:46:34 Set A/D encoding result=40 07:46:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:34 Set channel filter=0.000000e+000 result=40 07:46:34 Config A/D Result=40 07:46:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:34 Get A/D filter: -9.255963e+061 result=40 07:46:34 Get A/D value=-858993460 result=40 07:46:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:46:34 Parameters OK 07:46:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:46:34 Set A/D data flow result=40 07:46:34 Set A/D channel type result=40 07:46:34 Set A/D encoding result=40 07:46:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:46:34 Set channel filter=0.000000e+000 result=40 07:46:34 Config A/D Result=40 07:46:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:46:34 Get A/D filter: -9.255963e+061 result=40 07:46:34 Get A/D value=-858993460 result=40 07:46:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:46:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:46:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:46:34 Aux= 07:46:34 Message to Camera, serial 4899 queued 07:47:05 Received message from Master: op=PointingHead serial=4906 07:47:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:47:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:47:06 Point started: ret=0 07:47:06 point_skyscan result=0 07:47:06 Check angles 07:47:06 SkyScan query 07:47:07 SkyScan query done: ret=0 az=153.195<-10213 ze=8.94<-11404 Statuses=0009 0009 07:47:07 Msec=0 True Az=153.195 Ze=8.94 Az status=0009 Ze status=0009 07:47:07 Check angles 07:47:07 SkyScan query 07:47:08 SkyScan query done: ret=0 az=135.765<-9051 ze=-12<-12800 Statuses=0009 0009 07:47:08 Msec=750 True Az=135.765 Ze=-12 Az status=0009 Ze status=0009 07:47:08 Check angles 07:47:08 SkyScan query 07:47:08 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.955<-14197 Statuses=0009 0009 07:47:08 Msec=1500 True Az=118.23 Ze=-32.955 Az status=0009 Ze status=0009 07:47:09 Check angles 07:47:09 SkyScan query 07:47:09 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.495<-15433 Statuses=0009 0009 07:47:09 Msec=2250 True Az=100.8 Ze=-51.495 Az status=0009 Ze status=0009 07:47:09 Check angles 07:47:09 SkyScan query 07:47:10 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:47:10 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:47:10 Check angles 07:47:10 SkyScan query 07:47:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 07:47:11 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 07:47:11 Message to Master queued w/err=0: serial=4906 error=0 07:47:16 Received message from Master: op=Filter serial=4907 07:47:16 Color wheel filter change from 0 to 0 07:47:16 FLIGetFilterPos err=0 currentPosition=0 07:47:16 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:16 Filter is already there-color wheel unchanged 07:47:16 Received message from Master: op=Shutter serial=4908 07:47:16 Shutter LASER close 07:47:16 Received message from Camera: op=State serial=4910 07:47:16 GetSingleValue result=40 Value=cccccccc 07:47:16 SkyScan query 07:47:17 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:47:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:17 Parameters OK 07:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:17 Set A/D data flow result=40 07:47:17 Set A/D channel type result=40 07:47:17 Set A/D encoding result=40 07:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:17 Set channel filter=0.000000e+000 result=40 07:47:17 Config A/D Result=40 07:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:17 Get A/D filter: -9.255963e+061 result=40 07:47:17 Get A/D value=-858993460 result=40 07:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:17 Parameters OK 07:47:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:17 Set A/D data flow result=40 07:47:17 Set A/D channel type result=40 07:47:17 Set A/D encoding result=40 07:47:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:17 Set channel filter=0.000000e+000 result=40 07:47:17 Config A/D Result=40 07:47:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:17 Get A/D filter: -9.255963e+061 result=40 07:47:17 Get A/D value=-858993460 result=40 07:47:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:17 Aux= 07:47:17 Message to Camera, serial 4910 queued 07:47:47 Received message from Master: op=PointingHead serial=4917 07:47:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:47:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:47:48 Point started: ret=0 07:47:48 point_skyscan result=0 07:47:48 Check angles 07:47:48 SkyScan query 07:47:49 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.21<-17414 Statuses=0009 0009 07:47:49 Msec=0 True Az=108.915 Ze=-81.21 Az status=0009 Ze status=0009 07:47:49 Check angles 07:47:49 SkyScan query 07:47:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.165<-18811 Statuses=0008 0009 07:47:50 Msec=750 True Az=112.995 Ze=-102.165 Az status=0008 Ze status=0009 07:47:50 Check angles 07:47:50 SkyScan query 07:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.12<-20208 Statuses=0008 0009 07:47:51 Msec=1500 True Az=112.995 Ze=-123.12 Az status=0008 Ze status=0009 07:47:51 Check angles 07:47:51 SkyScan query 07:47:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.06<-21604 Statuses=0008 0009 07:47:51 Msec=2250 True Az=112.995 Ze=-144.06 Az status=0008 Ze status=0009 07:47:51 Check angles 07:47:51 SkyScan query 07:47:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.015<-23001 Statuses=0008 0009 07:47:52 Msec=3000 True Az=112.995 Ze=-165.015 Az status=0008 Ze status=0009 07:47:52 Check angles 07:47:52 SkyScan query 07:47:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 07:47:53 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 07:47:53 Message to Master queued w/err=0: serial=4917 error=0 07:47:58 Received message from Master: op=Filter serial=4918 07:47:58 Color wheel filter change from 0 to 0 07:47:58 FLIGetFilterPos err=0 currentPosition=0 07:47:58 FLIGetStepsRemaining err=0 RemainingSteps=0 07:47:58 Filter is already there-color wheel unchanged 07:47:58 Received message from Master: op=Shutter serial=4919 07:47:58 Shutter LASER open 07:47:58 Received message from Camera: op=State serial=4921 07:47:58 GetSingleValue result=40 Value=cccccccc 07:47:58 SkyScan query 07:47:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:47:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:59 Parameters OK 07:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:59 Set A/D data flow result=40 07:47:59 Set A/D channel type result=40 07:47:59 Set A/D encoding result=40 07:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:59 Set channel filter=0.000000e+000 result=40 07:47:59 Config A/D Result=40 07:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:59 Get A/D filter: -9.255963e+061 result=40 07:47:59 Get A/D value=-858993460 result=40 07:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:47:59 Parameters OK 07:47:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:47:59 Set A/D data flow result=40 07:47:59 Set A/D channel type result=40 07:47:59 Set A/D encoding result=40 07:47:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:47:59 Set channel filter=0.000000e+000 result=40 07:47:59 Config A/D Result=40 07:47:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:47:59 Get A/D filter: -9.255963e+061 result=40 07:47:59 Get A/D value=-858993460 result=40 07:47:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:47:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:47:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:47:59 Aux= 07:47:59 Message to Camera, serial 4921 queued 07:48:01 Received message from Master: op=Shutter serial=4925 07:48:01 Shutter LASER close 07:48:02 Received message from Master: op=PointingHead serial=4929 07:48:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:48:02 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:48:02 Point started: ret=0 07:48:02 point_skyscan result=0 07:48:03 Check angles 07:48:03 SkyScan query 07:48:03 SkyScan query done: ret=0 az=89.685<-5979 ze=156.945<-1537 Statuses=0009 0009 07:48:03 Msec=0 True Az=89.685 Ze=156.945 Az status=0009 Ze status=0009 07:48:03 Check angles 07:48:03 SkyScan query 07:48:04 SkyScan query done: ret=0 az=72.285<-4819 ze=135.975<-2935 Statuses=0009 0009 07:48:04 Msec=750 True Az=72.285 Ze=135.975 Az status=0009 Ze status=0009 07:48:04 Check angles 07:48:04 SkyScan query 07:48:05 SkyScan query done: ret=0 az=54.81<-3654 ze=115.02<-4332 Statuses=0009 0009 07:48:05 Msec=1500 True Az=54.81 Ze=115.02 Az status=0009 Ze status=0009 07:48:05 Check angles 07:48:05 SkyScan query 07:48:06 SkyScan query done: ret=0 az=40.905<-2727 ze=93.615<-5759 Statuses=0009 0009 07:48:06 Msec=2250 True Az=40.905 Ze=93.615 Az status=0009 Ze status=0009 07:48:06 Check angles 07:48:06 SkyScan query 07:48:06 SkyScan query done: ret=0 az=41.01<-2734 ze=72.66<-7156 Statuses=0008 0009 07:48:06 Msec=3000 True Az=41.01 Ze=72.66 Az status=0008 Ze status=0009 07:48:06 Check angles 07:48:06 SkyScan query 07:48:07 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 07:48:07 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 07:48:07 Check angles 07:48:07 SkyScan query 07:48:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:48:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:48:08 Message to Master queued w/err=0: serial=4929 error=0 07:48:13 Received message from Master: op=Filter serial=4930 07:48:13 Color wheel filter change from 0 to 0 07:48:13 FLIGetFilterPos err=0 currentPosition=0 07:48:13 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:13 Filter is already there-color wheel unchanged 07:48:13 Received message from Master: op=Shutter serial=4931 07:48:13 Shutter LASER close 07:48:13 Received message from Camera: op=State serial=4933 07:48:13 GetSingleValue result=40 Value=cccccccc 07:48:13 SkyScan query 07:48:14 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:48:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:14 Parameters OK 07:48:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:14 Set A/D data flow result=40 07:48:14 Set A/D channel type result=40 07:48:14 Set A/D encoding result=40 07:48:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:14 Set channel filter=0.000000e+000 result=40 07:48:14 Config A/D Result=40 07:48:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:14 Get A/D filter: -9.255963e+061 result=40 07:48:14 Get A/D value=-858993460 result=40 07:48:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:14 Parameters OK 07:48:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:14 Set A/D data flow result=40 07:48:14 Set A/D channel type result=40 07:48:14 Set A/D encoding result=40 07:48:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:14 Set channel filter=0.000000e+000 result=40 07:48:14 Config A/D Result=40 07:48:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:14 Get A/D filter: -9.255963e+061 result=40 07:48:14 Get A/D value=-858993460 result=40 07:48:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:14 Aux= 07:48:14 Message to Camera, serial 4933 queued 07:48:45 Received message from Master: op=PointingHead serial=4940 07:48:45 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:48:45 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:48:45 Point started: ret=0 07:48:45 point_skyscan result=0 07:48:46 Check angles 07:48:46 SkyScan query 07:48:46 SkyScan query done: ret=0 az=64.215<-4281 ze=66.555<-7563 Statuses=0009 0008 07:48:46 Msec=0 True Az=64.215 Ze=66.555 Az status=0009 Ze status=0008 07:48:46 Check angles 07:48:46 SkyScan query 07:48:47 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 07:48:47 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 07:48:47 Check angles 07:48:47 SkyScan query 07:48:48 SkyScan query done: ret=0 az=99.33<-6622 ze=66.495<-7567 Statuses=0009 0008 07:48:48 Msec=1500 True Az=99.33 Ze=66.495 Az status=0009 Ze status=0008 07:48:48 Check angles 07:48:48 SkyScan query 07:48:48 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 07:48:48 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 07:48:49 Check angles 07:48:49 SkyScan query 07:48:49 SkyScan query done: ret=0 az=134.145<-8943 ze=66.495<-7567 Statuses=0009 0008 07:48:49 Msec=3000 True Az=134.145 Ze=66.495 Az status=0009 Ze status=0008 07:48:49 Check angles 07:48:49 SkyScan query 07:48:50 SkyScan query done: ret=0 az=151.89<-10126 ze=66.495<-7567 Statuses=0009 0008 07:48:50 Msec=3750 True Az=151.89 Ze=66.495 Az status=0009 Ze status=0008 07:48:50 Check angles 07:48:50 SkyScan query 07:48:51 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 07:48:51 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 07:48:51 Message to Master queued w/err=0: serial=4940 error=0 07:48:56 Received message from Master: op=Filter serial=4941 07:48:56 Color wheel filter change from 0 to 0 07:48:56 FLIGetFilterPos err=0 currentPosition=0 07:48:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:48:56 Filter is already there-color wheel unchanged 07:48:56 Received message from Master: op=Shutter serial=4942 07:48:56 Shutter LASER close 07:48:56 Received message from Camera: op=State serial=4944 07:48:56 GetSingleValue result=40 Value=cccccccc 07:48:56 SkyScan query 07:48:57 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:57 Parameters OK 07:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:57 Set A/D data flow result=40 07:48:57 Set A/D channel type result=40 07:48:57 Set A/D encoding result=40 07:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:57 Set channel filter=0.000000e+000 result=40 07:48:57 Config A/D Result=40 07:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:57 Get A/D filter: -9.255963e+061 result=40 07:48:57 Get A/D value=-858993460 result=40 07:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:48:57 Parameters OK 07:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:48:57 Set A/D data flow result=40 07:48:57 Set A/D channel type result=40 07:48:57 Set A/D encoding result=40 07:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:48:57 Set channel filter=0.000000e+000 result=40 07:48:57 Config A/D Result=40 07:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:48:57 Get A/D filter: -9.255963e+061 result=40 07:48:57 Get A/D value=-858993460 result=40 07:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:48:57 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:48:57 Aux= 07:48:57 Message to Camera, serial 4944 queued 07:49:27 Received message from Master: op=PointingHead serial=4951 07:49:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:49:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:49:28 Point started: ret=0 07:49:28 point_skyscan result=0 07:49:28 Check angles 07:49:28 SkyScan query 07:49:29 SkyScan query done: ret=0 az=134.865<-8991 ze=36.675<-9555 Statuses=0009 0009 07:49:29 Msec=0 True Az=134.865 Ze=36.675 Az status=0009 Ze status=0009 07:49:29 Check angles 07:49:29 SkyScan query 07:49:30 SkyScan query done: ret=0 az=117.465<-7831 ze=15.705<-10953 Statuses=0009 0009 07:49:30 Msec=750 True Az=117.465 Ze=15.705 Az status=0009 Ze status=0009 07:49:30 Check angles [UTC 2018-12-4 07:49:30] 07:49:30 SkyScan query 07:49:31 SkyScan query done: ret=0 az=98.4<-6560 ze=-6.99<-12466 Statuses=0009 0009 07:49:31 Msec=1500 True Az=98.4 Ze=-6.99 Az status=0009 Ze status=0009 07:49:31 Check angles 07:49:31 SkyScan query 07:49:31 SkyScan query done: ret=0 az=82.62<-5508 ze=-26.22<-13748 Statuses=0009 0009 07:49:31 Msec=2250 True Az=82.62 Ze=-26.22 Az status=0009 Ze status=0009 07:49:31 Check angles 07:49:31 SkyScan query 07:49:32 SkyScan query done: ret=0 az=65.1<-4340 ze=-38.565<-14571 Statuses=0009 0008 07:49:32 Msec=3000 True Az=65.1 Ze=-38.565 Az status=0009 Ze status=0008 07:49:32 Check angles 07:49:32 SkyScan query 07:49:33 SkyScan query done: ret=0 az=47.7<-3180 ze=-38.52<-14568 Statuses=0009 0008 07:49:33 Msec=3750 True Az=47.7 Ze=-38.52 Az status=0009 Ze status=0008 07:49:33 Check angles 07:49:33 SkyScan query 07:49:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:49:34 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:49:34 Message to Master queued w/err=0: serial=4951 error=0 07:49:39 Received message from Master: op=Filter serial=4952 07:49:39 Color wheel filter change from 0 to 0 07:49:39 FLIGetFilterPos err=0 currentPosition=0 07:49:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:49:39 Filter is already there-color wheel unchanged 07:49:39 Received message from Master: op=Shutter serial=4953 07:49:39 Shutter LASER close 07:49:39 Received message from Camera: op=State serial=4955 07:49:39 GetSingleValue result=40 Value=cccccccc 07:49:39 SkyScan query 07:49:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:49:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:39 Parameters OK 07:49:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:39 Set A/D data flow result=40 07:49:39 Set A/D channel type result=40 07:49:39 Set A/D encoding result=40 07:49:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:39 Set channel filter=0.000000e+000 result=40 07:49:39 Config A/D Result=40 07:49:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:39 Get A/D filter: -9.255963e+061 result=40 07:49:39 Get A/D value=-858993460 result=40 07:49:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:49:39 Parameters OK 07:49:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:49:39 Set A/D data flow result=40 07:49:39 Set A/D channel type result=40 07:49:39 Set A/D encoding result=40 07:49:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:49:39 Set channel filter=0.000000e+000 result=40 07:49:39 Config A/D Result=40 07:49:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:49:39 Get A/D filter: -9.255963e+061 result=40 07:49:39 Get A/D value=-858993460 result=40 07:49:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:49:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:49:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:49:39 Aux= 07:49:39 Message to Camera, serial 4955 queued 07:50:10 Received message from Master: op=PointingHead serial=4962 07:50:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:50:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:50:11 Point started: ret=0 07:50:11 point_skyscan result=0 07:50:11 Check angles 07:50:11 SkyScan query 07:50:12 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.16<-16544 Statuses=0009 0009 07:50:12 Msec=0 True Az=63.78 Ze=-68.16 Az status=0009 Ze status=0009 07:50:12 Check angles 07:50:12 SkyScan query 07:50:13 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.55<-17970 Statuses=0009 0009 07:50:13 Msec=750 True Az=81.84 Ze=-89.55 Az status=0009 Ze status=0009 07:50:13 Check angles 07:50:13 SkyScan query 07:50:13 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.925<-19395 Statuses=0009 0009 07:50:13 Msec=1500 True Az=99.585 Ze=-110.925 Az status=0009 Ze status=0009 07:50:14 Check angles 07:50:14 SkyScan query 07:50:14 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.865<-20791 Statuses=0009 0009 07:50:14 Msec=2250 True Az=117.015 Ze=-131.865 Az status=0009 Ze status=0009 07:50:14 Check angles 07:50:14 SkyScan query 07:50:15 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 07:50:15 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 07:50:15 Check angles 07:50:15 SkyScan query 07:50:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:50:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:50:16 Message to Master queued w/err=0: serial=4962 error=0 07:50:21 Received message from Master: op=Filter serial=4963 07:50:21 Color wheel filter change from 0 to 0 07:50:21 FLIGetFilterPos err=0 currentPosition=0 07:50:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:50:21 Filter is already there-color wheel unchanged 07:50:21 Received message from Master: op=Shutter serial=4964 07:50:21 Shutter LASER close 07:50:21 Received message from Camera: op=State serial=4966 07:50:21 GetSingleValue result=40 Value=cccccccc 07:50:21 SkyScan query 07:50:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:50:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:22 Parameters OK 07:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:22 Set A/D data flow result=40 07:50:22 Set A/D channel type result=40 07:50:22 Set A/D encoding result=40 07:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:22 Set channel filter=0.000000e+000 result=40 07:50:22 Config A/D Result=40 07:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:22 Get A/D filter: -9.255963e+061 result=40 07:50:22 Get A/D value=-858993460 result=40 07:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:50:22 Parameters OK 07:50:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:50:22 Set A/D data flow result=40 07:50:22 Set A/D channel type result=40 07:50:22 Set A/D encoding result=40 07:50:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:50:22 Set channel filter=0.000000e+000 result=40 07:50:22 Config A/D Result=40 07:50:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:50:22 Get A/D filter: -9.255963e+061 result=40 07:50:22 Get A/D value=-858993460 result=40 07:50:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:50:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:50:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:50:22 Aux= 07:50:22 Message to Camera, serial 4966 queued 07:50:52 Received message from Master: op=PointingHead serial=4973 07:50:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:50:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:50:53 Point started: ret=0 07:50:53 point_skyscan result=0 07:50:54 Check angles 07:50:54 SkyScan query 07:50:54 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.045<-23403 Statuses=0009 0009 07:50:54 Msec=0 True Az=113.025 Ze=-171.045 Az status=0009 Ze status=0009 07:50:54 Check angles 07:50:54 SkyScan query 07:50:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:50:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:50:55 Message to Master queued w/err=0: serial=4973 error=0 07:51:00 Received message from Master: op=Filter serial=4974 07:51:00 Color wheel filter change from 0 to 0 07:51:00 FLIGetFilterPos err=0 currentPosition=0 07:51:00 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:00 Filter is already there-color wheel unchanged 07:51:00 Received message from Master: op=Shutter serial=4975 07:51:00 Shutter LASER open 07:51:00 Received message from Camera: op=State serial=4977 07:51:00 GetSingleValue result=40 Value=cccccccc 07:51:00 SkyScan query 07:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:51:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:01 Parameters OK 07:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:01 Set A/D data flow result=40 07:51:01 Set A/D channel type result=40 07:51:01 Set A/D encoding result=40 07:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:01 Set channel filter=0.000000e+000 result=40 07:51:01 Config A/D Result=40 07:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:01 Get A/D filter: -9.255963e+061 result=40 07:51:01 Get A/D value=-858993460 result=40 07:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:01 Parameters OK 07:51:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:01 Set A/D data flow result=40 07:51:01 Set A/D channel type result=40 07:51:01 Set A/D encoding result=40 07:51:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:01 Set channel filter=0.000000e+000 result=40 07:51:01 Config A/D Result=40 07:51:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:01 Get A/D filter: -9.255963e+061 result=40 07:51:01 Get A/D value=-858993460 result=40 07:51:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:01 Aux= 07:51:01 Message to Camera, serial 4977 queued 07:51:03 Received message from Master: op=Shutter serial=4981 07:51:03 Shutter LASER close 07:51:04 Received message from Master: op=PointingHead serial=4985 07:51:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:51:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:51:04 Point started: ret=0 07:51:04 point_skyscan result=0 07:51:05 Check angles 07:51:05 SkyScan query 07:51:06 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.325<-21555 Statuses=0009 0009 07:51:06 Msec=0 True Az=135.84 Ze=-143.325 Az status=0009 Ze status=0009 07:51:06 Check angles 07:51:06 SkyScan query 07:51:06 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.355<-20157 Statuses=0009 0009 07:51:06 Msec=750 True Az=153.39 Ze=-122.355 Az status=0009 Ze status=0009 07:51:06 Check angles 07:51:06 SkyScan query 07:51:07 SkyScan query done: ret=0 az=171.18<-11412 ze=-100.98<-18732 Statuses=0009 0009 07:51:07 Msec=1500 True Az=171.18 Ze=-100.98 Az status=0009 Ze status=0009 07:51:07 Check angles 07:51:07 SkyScan query 07:51:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.025<-17335 Statuses=0008 0009 07:51:08 Msec=2250 True Az=176.01 Ze=-80.025 Az status=0008 Ze status=0009 07:51:08 Check angles 07:51:08 SkyScan query 07:51:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.055<-15937 Statuses=0008 0009 07:51:09 Msec=3000 True Az=175.995 Ze=-59.055 Az status=0008 Ze status=0009 07:51:09 Check angles 07:51:09 SkyScan query 07:51:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:51:09 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:51:09 Message to Master queued w/err=0: serial=4985 error=0 07:51:14 Received message from Master: op=Filter serial=4986 07:51:14 Color wheel filter change from 0 to 0 07:51:14 FLIGetFilterPos err=0 currentPosition=0 07:51:14 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:14 Filter is already there-color wheel unchanged 07:51:14 Received message from Master: op=Shutter serial=4987 07:51:14 Shutter LASER close 07:51:15 Received message from Camera: op=State serial=4989 07:51:15 GetSingleValue result=40 Value=cccccccc 07:51:15 SkyScan query 07:51:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:51:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:15 Parameters OK 07:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:15 Set A/D data flow result=40 07:51:15 Set A/D channel type result=40 07:51:15 Set A/D encoding result=40 07:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:15 Set channel filter=0.000000e+000 result=40 07:51:15 Config A/D Result=40 07:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:15 Get A/D filter: -9.255963e+061 result=40 07:51:15 Get A/D value=-858993460 result=40 07:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:15 Parameters OK 07:51:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:15 Set A/D data flow result=40 07:51:15 Set A/D channel type result=40 07:51:15 Set A/D encoding result=40 07:51:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:15 Set channel filter=0.000000e+000 result=40 07:51:15 Config A/D Result=40 07:51:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:15 Get A/D filter: -9.255963e+061 result=40 07:51:15 Get A/D value=-858993460 result=40 07:51:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:15 Aux= 07:51:15 Message to Camera, serial 4989 queued 07:51:46 Received message from Master: op=PointingHead serial=4996 07:51:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:51:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:51:46 Point started: ret=0 07:51:46 point_skyscan result=0 07:51:47 Check angles 07:51:47 SkyScan query 07:51:48 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.42<-13428 Statuses=0009 0009 07:51:48 Msec=0 True Az=152.775 Ze=-21.42 Az status=0009 Ze status=0009 07:51:48 Check angles 07:51:48 SkyScan query 07:51:48 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.45<-12030 Statuses=0009 0009 07:51:48 Msec=750 True Az=135.315 Ze=-0.45 Az status=0009 Ze status=0009 07:51:49 Received message from Master: op=Identify serial=4997 07:51:49 Check angles 07:51:49 SkyScan query 07:51:49 SkyScan query done: ret=0 az=117.75<-7850 ze=20.505<-10633 Statuses=0009 0009 07:51:49 Msec=1500 True Az=117.75 Ze=20.505 Az status=0009 Ze status=0009 07:51:49 Check angles 07:51:49 SkyScan query 07:51:50 SkyScan query done: ret=0 az=100.035<-6669 ze=41.895<-9207 Statuses=0009 0009 07:51:50 Msec=2250 True Az=100.035 Ze=41.895 Az status=0009 Ze status=0009 07:51:50 Check angles 07:51:50 SkyScan query 07:51:51 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 07:51:51 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 07:51:51 Check angles 07:51:51 SkyScan query 07:51:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:51:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:51:51 Message to Master queued w/err=0: serial=4996 error=0 07:51:56 Received message from Master: op=Filter serial=5000 07:51:56 Color wheel filter change from 0 to 0 07:51:56 FLIGetFilterPos err=0 currentPosition=0 07:51:56 FLIGetStepsRemaining err=0 RemainingSteps=0 07:51:56 Filter is already there-color wheel unchanged 07:51:57 Received message from Master: op=Shutter serial=5001 07:51:57 Shutter LASER close 07:51:57 Received message from Camera: op=State serial=5003 07:51:57 GetSingleValue result=40 Value=cccccccc 07:51:57 SkyScan query 07:51:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:51:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:57 Parameters OK 07:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:57 Set A/D data flow result=40 07:51:57 Set A/D channel type result=40 07:51:57 Set A/D encoding result=40 07:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:57 Set channel filter=0.000000e+000 result=40 07:51:57 Config A/D Result=40 07:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:57 Get A/D filter: -9.255963e+061 result=40 07:51:57 Get A/D value=-858993460 result=40 07:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:51:57 Parameters OK 07:51:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:51:57 Set A/D data flow result=40 07:51:57 Set A/D channel type result=40 07:51:57 Set A/D encoding result=40 07:51:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:51:57 Set channel filter=0.000000e+000 result=40 07:51:57 Config A/D Result=40 07:51:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:51:57 Get A/D filter: -9.255963e+061 result=40 07:51:57 Get A/D value=-858993460 result=40 07:51:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:51:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:51:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:51:57 Aux= 07:51:57 Message to Camera, serial 5003 queued [UTC 2018-12-4 07:52:09] 07:52:28 Received message from Master: op=PointingHead serial=5010 07:52:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:52:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:52:28 Point started: ret=0 07:52:28 point_skyscan result=0 07:52:29 Check angles 07:52:29 SkyScan query 07:52:30 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 07:52:30 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 07:52:30 Check angles 07:52:30 SkyScan query 07:52:31 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 07:52:31 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 07:52:31 Check angles 07:52:31 SkyScan query 07:52:31 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 07:52:31 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 07:52:31 Check angles 07:52:31 SkyScan query 07:52:32 SkyScan query done: ret=0 az=161.625<-10775 ze=38.505<-9433 Statuses=0009 0008 07:52:32 Msec=2250 True Az=161.625 Ze=38.505 Az status=0009 Ze status=0008 07:52:32 Check angles 07:52:32 SkyScan query 07:52:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 07:52:33 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 07:52:33 Check angles 07:52:33 SkyScan query 07:52:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:52:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:52:34 Message to Master queued w/err=0: serial=5010 error=0 07:52:39 Received message from Master: op=Filter serial=5011 07:52:39 Color wheel filter change from 0 to 0 07:52:39 FLIGetFilterPos err=0 currentPosition=0 07:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 07:52:39 Filter is already there-color wheel unchanged 07:52:39 Received message from Master: op=Shutter serial=5012 07:52:39 Shutter LASER close 07:52:39 Received message from Camera: op=State serial=5014 07:52:39 GetSingleValue result=40 Value=cccccccc 07:52:39 SkyScan query 07:52:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:52:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:39 Parameters OK 07:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:39 Set A/D data flow result=40 07:52:39 Set A/D channel type result=40 07:52:39 Set A/D encoding result=40 07:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:39 Set channel filter=0.000000e+000 result=40 07:52:39 Config A/D Result=40 07:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:39 Get A/D filter: -9.255963e+061 result=40 07:52:39 Get A/D value=-858993460 result=40 07:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:52:39 Parameters OK 07:52:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:52:39 Set A/D data flow result=40 07:52:39 Set A/D channel type result=40 07:52:39 Set A/D encoding result=40 07:52:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:52:39 Set channel filter=0.000000e+000 result=40 07:52:39 Config A/D Result=40 07:52:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:52:39 Get A/D filter: -9.255963e+061 result=40 07:52:39 Get A/D value=-858993460 result=40 07:52:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:52:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:52:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:52:39 Aux= 07:52:39 Message to Camera, serial 5014 queued 07:53:10 Received message from Master: op=PointingHead serial=5021 07:53:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:53:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:53:11 Point started: ret=0 07:53:11 point_skyscan result=0 07:53:11 Check angles 07:53:11 SkyScan query 07:53:12 SkyScan query done: ret=0 az=152.985<-10199 ze=8.7<-11420 Statuses=0009 0009 07:53:12 Msec=0 True Az=152.985 Ze=8.7 Az status=0009 Ze status=0009 07:53:12 Check angles 07:53:12 SkyScan query 07:53:13 SkyScan query done: ret=0 az=135.36<-9024 ze=-12.705<-12847 Statuses=0009 0009 07:53:13 Msec=750 True Az=135.36 Ze=-12.705 Az status=0009 Ze status=0009 07:53:13 Check angles 07:53:13 SkyScan query 07:53:13 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.255<-14217 Statuses=0009 0009 07:53:13 Msec=1500 True Az=118.035 Ze=-33.255 Az status=0009 Ze status=0009 07:53:14 Check angles 07:53:14 SkyScan query 07:53:14 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 07:53:14 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 07:53:14 Check angles 07:53:14 SkyScan query 07:53:15 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:53:15 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:53:15 Check angles 07:53:15 SkyScan query 07:53:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:53:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:53:16 Message to Master queued w/err=0: serial=5021 error=0 07:53:21 Received message from Master: op=Filter serial=5022 07:53:21 Color wheel filter change from 0 to 0 07:53:21 FLIGetFilterPos err=0 currentPosition=0 07:53:21 FLIGetStepsRemaining err=0 RemainingSteps=0 07:53:21 Filter is already there-color wheel unchanged 07:53:21 Received message from Master: op=Shutter serial=5023 07:53:21 Shutter LASER close 07:53:21 Received message from Camera: op=State serial=5025 07:53:21 GetSingleValue result=40 Value=cccccccc 07:53:21 SkyScan query 07:53:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:53:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:21 Parameters OK 07:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:21 Set A/D data flow result=40 07:53:21 Set A/D channel type result=40 07:53:21 Set A/D encoding result=40 07:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:21 Set channel filter=0.000000e+000 result=40 07:53:21 Config A/D Result=40 07:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:21 Get A/D filter: -9.255963e+061 result=40 07:53:21 Get A/D value=-858993460 result=40 07:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:53:21 Parameters OK 07:53:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:53:21 Set A/D data flow result=40 07:53:21 Set A/D channel type result=40 07:53:21 Set A/D encoding result=40 07:53:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:53:21 Set channel filter=0.000000e+000 result=40 07:53:21 Config A/D Result=40 07:53:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:53:21 Get A/D filter: -9.255963e+061 result=40 07:53:21 Get A/D value=-858993460 result=40 07:53:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:53:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:53:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:53:21 Aux= 07:53:21 Message to Camera, serial 5025 queued 07:53:52 Received message from Master: op=PointingHead serial=5032 07:53:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:53:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:53:53 Point started: ret=0 07:53:53 point_skyscan result=0 07:53:53 Check angles 07:53:53 SkyScan query 07:53:54 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.3<-17420 Statuses=0009 0009 07:53:54 Msec=0 True Az=109.035 Ze=-81.3 Az status=0009 Ze status=0009 07:53:54 Check angles 07:53:54 SkyScan query 07:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 07:53:55 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 07:53:55 Check angles 07:53:55 SkyScan query 07:53:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.24<-20216 Statuses=0008 0009 07:53:55 Msec=1500 True Az=112.995 Ze=-123.24 Az status=0008 Ze status=0009 07:53:56 Check angles 07:53:56 SkyScan query 07:53:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.165<-21611 Statuses=0008 0009 07:53:56 Msec=2250 True Az=112.995 Ze=-144.165 Az status=0008 Ze status=0009 07:53:56 Check angles 07:53:56 SkyScan query 07:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.12<-23008 Statuses=0008 0009 07:53:57 Msec=3000 True Az=112.995 Ze=-165.12 Az status=0008 Ze status=0009 07:53:57 Check angles 07:53:57 SkyScan query 07:53:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 07:53:58 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 07:53:58 Message to Master queued w/err=0: serial=5032 error=0 07:54:03 Received message from Master: op=Filter serial=5033 07:54:03 Color wheel filter change from 0 to 0 07:54:03 FLIGetFilterPos err=0 currentPosition=0 07:54:03 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:03 Filter is already there-color wheel unchanged 07:54:03 Received message from Master: op=Shutter serial=5034 07:54:03 Shutter LASER open 07:54:03 Received message from Camera: op=State serial=5036 07:54:03 GetSingleValue result=40 Value=cccccccc 07:54:03 SkyScan query 07:54:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:54:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:04 Parameters OK 07:54:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:04 Set A/D data flow result=40 07:54:04 Set A/D channel type result=40 07:54:04 Set A/D encoding result=40 07:54:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:04 Set channel filter=0.000000e+000 result=40 07:54:04 Config A/D Result=40 07:54:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:04 Get A/D filter: -9.255963e+061 result=40 07:54:04 Get A/D value=-858993460 result=40 07:54:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:04 Parameters OK 07:54:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:04 Set A/D data flow result=40 07:54:04 Set A/D channel type result=40 07:54:04 Set A/D encoding result=40 07:54:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:04 Set channel filter=0.000000e+000 result=40 07:54:04 Config A/D Result=40 07:54:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:04 Get A/D filter: -9.255963e+061 result=40 07:54:04 Get A/D value=-858993460 result=40 07:54:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:04 Aux= 07:54:04 Message to Camera, serial 5036 queued 07:54:06 Received message from Master: op=Shutter serial=5040 07:54:06 Shutter LASER close 07:54:06 Received message from Master: op=PointingHead serial=5044 07:54:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 07:54:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 07:54:07 Point started: ret=0 07:54:07 point_skyscan result=0 07:54:08 Check angles 07:54:08 SkyScan query 07:54:08 SkyScan query done: ret=0 az=89.85<-5990 ze=157.125<-1525 Statuses=0009 0009 07:54:08 Msec=0 True Az=89.85 Ze=157.125 Az status=0009 Ze status=0009 07:54:08 Check angles 07:54:08 SkyScan query 07:54:09 SkyScan query done: ret=0 az=72<-4800 ze=135.705<-2953 Statuses=0009 0009 07:54:09 Msec=750 True Az=72 Ze=135.705 Az status=0009 Ze status=0009 07:54:09 Check angles 07:54:09 SkyScan query 07:54:10 SkyScan query done: ret=0 az=54.69<-3646 ze=114.78<-4348 Statuses=0009 0009 07:54:10 Msec=1500 True Az=54.69 Ze=114.78 Az status=0009 Ze status=0009 07:54:10 Check angles 07:54:10 SkyScan query 07:54:10 SkyScan query done: ret=0 az=40.875<-2725 ze=93.825<-5745 Statuses=0009 0009 07:54:10 Msec=2250 True Az=40.875 Ze=93.825 Az status=0009 Ze status=0009 07:54:11 Check angles 07:54:11 SkyScan query 07:54:11 SkyScan query done: ret=0 az=41.01<-2734 ze=72.855<-7143 Statuses=0008 0009 07:54:11 Msec=3000 True Az=41.01 Ze=72.855 Az status=0008 Ze status=0009 07:54:11 Check angles 07:54:11 SkyScan query 07:54:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.485<-8501 Statuses=0008 0009 07:54:12 Msec=3750 True Az=40.995 Ze=52.485 Az status=0008 Ze status=0009 07:54:12 Check angles 07:54:12 SkyScan query 07:54:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 07:54:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 07:54:13 Message to Master queued w/err=0: serial=5044 error=0 07:54:18 Received message from Master: op=Filter serial=5045 07:54:18 Color wheel filter change from 0 to 0 07:54:18 FLIGetFilterPos err=0 currentPosition=0 07:54:18 FLIGetStepsRemaining err=0 RemainingSteps=0 07:54:18 Filter is already there-color wheel unchanged 07:54:18 Received message from Master: op=Shutter serial=5046 07:54:18 Shutter LASER close 07:54:18 Received message from Camera: op=State serial=5048 07:54:18 GetSingleValue result=40 Value=cccccccc 07:54:18 SkyScan query 07:54:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 07:54:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:19 Parameters OK 07:54:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:19 Set A/D data flow result=40 07:54:19 Set A/D channel type result=40 07:54:19 Set A/D encoding result=40 07:54:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:19 Set channel filter=0.000000e+000 result=40 07:54:19 Config A/D Result=40 07:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:19 Get A/D filter: -9.255963e+061 result=40 07:54:19 Get A/D value=-858993460 result=40 07:54:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:54:19 Parameters OK 07:54:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:54:19 Set A/D data flow result=40 07:54:19 Set A/D channel type result=40 07:54:19 Set A/D encoding result=40 07:54:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:54:19 Set channel filter=0.000000e+000 result=40 07:54:19 Config A/D Result=40 07:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:54:19 Get A/D filter: -9.255963e+061 result=40 07:54:19 Get A/D value=-858993460 result=40 07:54:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:54:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:54:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:54:19 Aux= 07:54:19 Message to Camera, serial 5048 queued 07:54:49 Received message from Master: op=PointingHead serial=5055 07:54:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 07:54:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 07:54:50 Point started: ret=0 07:54:50 point_skyscan result=0 07:54:50 Check angles 07:54:50 SkyScan query 07:54:51 SkyScan query done: ret=0 az=63.9<-4260 ze=66.54<-7564 Statuses=0009 0008 07:54:51 Msec=0 True Az=63.9 Ze=66.54 Az status=0009 Ze status=0008 07:54:51 Check angles 07:54:51 SkyScan query 07:54:52 SkyScan query done: ret=0 az=81.39<-5426 ze=66.51<-7566 Statuses=0009 0008 07:54:52 Msec=750 True Az=81.39 Ze=66.51 Az status=0009 Ze status=0008 07:54:52 Check angles 07:54:52 SkyScan query 07:54:53 SkyScan query done: ret=0 az=99.015<-6601 ze=66.495<-7567 Statuses=0009 0008 07:54:53 Msec=1500 True Az=99.015 Ze=66.495 Az status=0009 Ze status=0008 07:54:53 Check angles 07:54:53 SkyScan query 07:54:53 SkyScan query done: ret=0 az=116.415<-7761 ze=66.495<-7567 Statuses=0009 0008 07:54:53 Msec=2250 True Az=116.415 Ze=66.495 Az status=0009 Ze status=0008 07:54:53 Check angles 07:54:53 SkyScan query 07:54:54 SkyScan query done: ret=0 az=133.905<-8927 ze=66.495<-7567 Statuses=0009 0008 07:54:54 Msec=3000 True Az=133.905 Ze=66.495 Az status=0009 Ze status=0008 07:54:54 Check angles 07:54:54 SkyScan query 07:54:55 SkyScan query done: ret=0 az=151.32<-10088 ze=66.495<-7567 Statuses=0009 0008 07:54:55 Msec=3750 True Az=151.32 Ze=66.495 Az status=0009 Ze status=0008 07:54:55 Check angles 07:54:55 SkyScan query 07:54:56 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 07:54:56 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 07:54:56 Message to Master queued w/err=0: serial=5055 error=0 07:55:01 Received message from Master: op=Filter serial=5056 07:55:01 Color wheel filter change from 0 to 0 07:55:01 FLIGetFilterPos err=0 currentPosition=0 07:55:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:01 Filter is already there-color wheel unchanged 07:55:01 Received message from Master: op=Shutter serial=5057 07:55:01 Shutter LASER close 07:55:01 Received message from Camera: op=State serial=5059 07:55:01 GetSingleValue result=40 Value=cccccccc 07:55:01 SkyScan query 07:55:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 07:55:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:01 Parameters OK 07:55:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:01 Set A/D data flow result=40 07:55:01 Set A/D channel type result=40 07:55:01 Set A/D encoding result=40 07:55:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:01 Set channel filter=0.000000e+000 result=40 07:55:01 Config A/D Result=40 07:55:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:01 Get A/D filter: -9.255963e+061 result=40 07:55:01 Get A/D value=-858993460 result=40 07:55:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:01 Parameters OK 07:55:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:01 Set A/D data flow result=40 07:55:01 Set A/D channel type result=40 07:55:01 Set A/D encoding result=40 07:55:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:01 Set channel filter=0.000000e+000 result=40 07:55:01 Config A/D Result=40 07:55:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:01 Get A/D filter: -9.255963e+061 result=40 07:55:01 Get A/D value=-858993460 result=40 07:55:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:01 Aux= 07:55:01 Message to Camera, serial 5059 queued 07:55:32 Received message from Master: op=PointingHead serial=5066 07:55:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 07:55:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 07:55:33 Point started: ret=0 07:55:33 point_skyscan result=0 07:55:33 Check angles 07:55:33 SkyScan query 07:55:34 SkyScan query done: ret=0 az=134.565<-8971 ze=36.12<-9592 Statuses=0009 0009 07:55:34 Msec=0 True Az=134.565 Ze=36.12 Az status=0009 Ze status=0009 07:55:34 Check angles 07:55:34 SkyScan query 07:55:35 SkyScan query done: ret=0 az=117.03<-7802 ze=15.18<-10988 Statuses=0009 0009 07:55:35 Msec=750 True Az=117.03 Ze=15.18 Az status=0009 Ze status=0009 07:55:35 Check angles 07:55:35 SkyScan query 07:55:35 SkyScan query done: ret=0 az=99.63<-6642 ze=-5.79<-12386 Statuses=0009 0009 07:55:35 Msec=1500 True Az=99.63 Ze=-5.79 Az status=0009 Ze status=0009 07:55:36 Check angles 07:55:36 SkyScan query 07:55:36 SkyScan query done: ret=0 az=81.78<-5452 ze=-27.165<-13811 Statuses=0009 0009 07:55:36 Msec=2250 True Az=81.78 Ze=-27.165 Az status=0009 Ze status=0009 07:55:36 Check angles 07:55:36 SkyScan query 07:55:37 SkyScan query done: ret=0 az=64.245<-4283 ze=-38.565<-14571 Statuses=0009 0008 07:55:37 Msec=3000 True Az=64.245 Ze=-38.565 Az status=0009 Ze status=0008 07:55:37 Check angles 07:55:37 SkyScan query 07:55:38 SkyScan query done: ret=0 az=46.785<-3119 ze=-38.52<-14568 Statuses=0009 0008 07:55:38 Msec=3750 True Az=46.785 Ze=-38.52 Az status=0009 Ze status=0008 07:55:38 Check angles 07:55:38 SkyScan query 07:55:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:55:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 07:55:38 Message to Master queued w/err=0: serial=5066 error=0 07:55:43 Received message from Master: op=Filter serial=5067 07:55:43 Color wheel filter change from 0 to 0 07:55:43 FLIGetFilterPos err=0 currentPosition=0 07:55:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:55:43 Filter is already there-color wheel unchanged 07:55:44 Received message from Master: op=Shutter serial=5068 07:55:44 Shutter LASER close 07:55:44 Received message from Camera: op=State serial=5070 07:55:44 GetSingleValue result=40 Value=cccccccc 07:55:44 SkyScan query 07:55:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 07:55:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:44 Parameters OK 07:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:44 Set A/D data flow result=40 07:55:44 Set A/D channel type result=40 07:55:44 Set A/D encoding result=40 07:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:44 Set channel filter=0.000000e+000 result=40 07:55:44 Config A/D Result=40 07:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:44 Get A/D filter: -9.255963e+061 result=40 07:55:44 Get A/D value=-858993460 result=40 07:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:55:44 Parameters OK 07:55:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:55:44 Set A/D data flow result=40 07:55:44 Set A/D channel type result=40 07:55:44 Set A/D encoding result=40 07:55:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:55:44 Set channel filter=0.000000e+000 result=40 07:55:44 Config A/D Result=40 07:55:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:55:44 Get A/D filter: -9.255963e+061 result=40 07:55:44 Get A/D value=-858993460 result=40 07:55:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:55:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:55:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:55:44 Aux= 07:55:44 Message to Camera, serial 5070 queued 07:56:15 Received message from Master: op=PointingHead serial=5077 07:56:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 07:56:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 07:56:15 Point started: ret=0 07:56:15 point_skyscan result=0 07:56:16 Check angles 07:56:16 SkyScan query 07:56:17 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.145<-16543 Statuses=0009 0009 07:56:17 Msec=0 True Az=63.78 Ze=-68.145 Az status=0009 Ze status=0009 07:56:17 Check angles 07:56:17 SkyScan query 07:56:18 SkyScan query done: ret=0 az=81.27<-5418 ze=-89.1<-17940 Statuses=0009 0009 07:56:18 Msec=750 True Az=81.27 Ze=-89.1 Az status=0009 Ze status=0009 07:56:18 Check angles 07:56:18 SkyScan query 07:56:18 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.04<-19336 Statuses=0009 0009 07:56:18 Msec=1500 True Az=98.925 Ze=-110.04 Az status=0009 Ze status=0009 07:56:18 Check angles 07:56:18 SkyScan query 07:56:19 SkyScan query done: ret=0 az=116.31<-7754 ze=-130.98<-20732 Statuses=0009 0009 07:56:19 Msec=2250 True Az=116.31 Ze=-130.98 Az status=0009 Ze status=0009 07:56:19 Check angles 07:56:19 SkyScan query 07:56:20 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 07:56:20 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 07:56:20 Check angles 07:56:20 SkyScan query 07:56:21 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 07:56:21 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 07:56:21 Message to Master queued w/err=0: serial=5077 error=0 07:56:26 Received message from Master: op=Filter serial=5078 07:56:26 Color wheel filter change from 0 to 0 07:56:26 FLIGetFilterPos err=0 currentPosition=0 07:56:26 FLIGetStepsRemaining err=0 RemainingSteps=0 07:56:26 Filter is already there-color wheel unchanged 07:56:26 Received message from Master: op=Shutter serial=5079 07:56:26 Shutter LASER close 07:56:26 Received message from Camera: op=State serial=5081 07:56:26 GetSingleValue result=40 Value=cccccccc 07:56:26 SkyScan query 07:56:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 07:56:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:26 Parameters OK 07:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:26 Set A/D data flow result=40 07:56:26 Set A/D channel type result=40 07:56:26 Set A/D encoding result=40 07:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:26 Set channel filter=0.000000e+000 result=40 07:56:26 Config A/D Result=40 07:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:26 Get A/D filter: -9.255963e+061 result=40 07:56:26 Get A/D value=-858993460 result=40 07:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:56:26 Parameters OK 07:56:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:56:26 Set A/D data flow result=40 07:56:26 Set A/D channel type result=40 07:56:26 Set A/D encoding result=40 07:56:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:56:26 Set channel filter=0.000000e+000 result=40 07:56:26 Config A/D Result=40 07:56:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:56:26 Get A/D filter: -9.255963e+061 result=40 07:56:26 Get A/D value=-858993460 result=40 07:56:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:56:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:56:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:56:26 Aux= 07:56:26 Message to Camera, serial 5081 queued 07:56:57 Received message from Master: op=PointingHead serial=5088 07:56:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:56:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:56:58 Point started: ret=0 07:56:58 point_skyscan result=0 07:56:58 Check angles 07:56:58 SkyScan query 07:56:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.48<-23432 Statuses=0009 0009 07:56:59 Msec=0 True Az=113.01 Ze=-171.48 Az status=0009 Ze status=0009 07:56:59 Check angles 07:56:59 SkyScan query 07:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 07:57:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 07:57:00 Message to Master queued w/err=0: serial=5088 error=0 07:57:05 Received message from Master: op=Filter serial=5089 07:57:05 Color wheel filter change from 0 to 0 07:57:05 FLIGetFilterPos err=0 currentPosition=0 07:57:05 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:05 Filter is already there-color wheel unchanged 07:57:05 Received message from Master: op=Shutter serial=5090 07:57:05 Shutter LASER open 07:57:05 Received message from Camera: op=State serial=5092 07:57:05 GetSingleValue result=40 Value=cccccccc 07:57:05 SkyScan query 07:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 07:57:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:06 Parameters OK 07:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:06 Set A/D data flow result=40 07:57:06 Set A/D channel type result=40 07:57:06 Set A/D encoding result=40 07:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:06 Set channel filter=0.000000e+000 result=40 07:57:06 Config A/D Result=40 07:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:06 Get A/D filter: -9.255963e+061 result=40 07:57:06 Get A/D value=-858993460 result=40 07:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:06 Parameters OK 07:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:06 Set A/D data flow result=40 07:57:06 Set A/D channel type result=40 07:57:06 Set A/D encoding result=40 07:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:06 Set channel filter=0.000000e+000 result=40 07:57:06 Config A/D Result=40 07:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:06 Get A/D filter: -9.255963e+061 result=40 07:57:06 Get A/D value=-858993460 result=40 07:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:06 Aux= 07:57:06 Message to Camera, serial 5092 queued 07:57:08 Received message from Master: op=Shutter serial=5096 07:57:08 Shutter LASER close 07:57:09 Received message from Master: op=PointingHead serial=5100 07:57:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 07:57:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 07:57:09 Point started: ret=0 07:57:09 point_skyscan result=0 07:57:10 Check angles 07:57:10 SkyScan query 07:57:10 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.935<-21529 Statuses=0009 0009 07:57:10 Msec=0 True Az=136.17 Ze=-142.935 Az status=0009 Ze status=0009 07:57:10 Check angles 07:57:10 SkyScan query 07:57:11 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.965<-20131 Statuses=0009 0009 07:57:11 Msec=750 True Az=153.705 Ze=-121.965 Az status=0009 Ze status=0009 07:57:11 Check angles 07:57:11 SkyScan query 07:57:12 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.025<-18735 Statuses=0009 0009 07:57:12 Msec=1500 True Az=171.195 Ze=-101.025 Az status=0009 Ze status=0009 07:57:12 Check angles 07:57:12 SkyScan query 07:57:13 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 07:57:13 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 07:57:13 Check angles 07:57:13 SkyScan query 07:57:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 07:57:13 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 07:57:13 Check angles 07:57:13 SkyScan query 07:57:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 07:57:14 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 07:57:14 Message to Master queued w/err=0: serial=5100 error=0 07:57:19 Received message from Master: op=Filter serial=5101 07:57:19 Color wheel filter change from 0 to 0 07:57:19 FLIGetFilterPos err=0 currentPosition=0 07:57:19 FLIGetStepsRemaining err=0 RemainingSteps=0 07:57:19 Filter is already there-color wheel unchanged 07:57:19 Received message from Master: op=Shutter serial=5102 07:57:19 Shutter LASER close 07:57:19 Received message from Camera: op=State serial=5104 07:57:19 GetSingleValue result=40 Value=cccccccc 07:57:19 SkyScan query 07:57:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 07:57:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:20 Parameters OK 07:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:20 Set A/D data flow result=40 07:57:20 Set A/D channel type result=40 07:57:20 Set A/D encoding result=40 07:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:20 Set channel filter=0.000000e+000 result=40 07:57:20 Config A/D Result=40 07:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:20 Get A/D filter: -9.255963e+061 result=40 07:57:20 Get A/D value=-858993460 result=40 07:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:57:20 Parameters OK 07:57:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:57:20 Set A/D data flow result=40 07:57:20 Set A/D channel type result=40 07:57:20 Set A/D encoding result=40 07:57:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:57:20 Set channel filter=0.000000e+000 result=40 07:57:20 Config A/D Result=40 07:57:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:57:20 Get A/D filter: -9.255963e+061 result=40 07:57:20 Get A/D value=-858993460 result=40 07:57:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:57:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:57:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:57:20 Aux= 07:57:20 Message to Camera, serial 5104 queued 07:57:51 Received message from Master: op=PointingHead serial=5111 07:57:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 07:57:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 07:57:51 Point started: ret=0 07:57:51 point_skyscan result=0 07:57:52 Check angles 07:57:52 SkyScan query 07:57:52 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.39<-13426 Statuses=0009 0009 07:57:52 Msec=0 True Az=152.715 Ze=-21.39 Az status=0009 Ze status=0009 07:57:53 Check angles 07:57:53 SkyScan query 07:57:53 SkyScan query done: ret=0 az=135.18<-9012 ze=-0.435<-12029 Statuses=0009 0009 07:57:53 Msec=750 True Az=135.18 Ze=-0.435 Az status=0009 Ze status=0009 07:57:53 Check angles 07:57:53 SkyScan query 07:57:54 SkyScan query done: ret=0 az=117.585<-7839 ze=20.52<-10632 Statuses=0009 0009 07:57:54 Msec=1500 True Az=117.585 Ze=20.52 Az status=0009 Ze status=0009 07:57:54 Check angles 07:57:54 SkyScan query 07:57:55 SkyScan query done: ret=0 az=99.945<-6663 ze=41.925<-9205 Statuses=0009 0009 07:57:55 Msec=2250 True Az=99.945 Ze=41.925 Az status=0009 Ze status=0009 07:57:55 Check angles 07:57:55 SkyScan query 07:57:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 07:57:56 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 07:57:56 Check angles 07:57:56 SkyScan query 07:57:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 07:57:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 07:57:56 Message to Master queued w/err=0: serial=5111 error=0 07:58:01 Received message from Master: op=Filter serial=5112 07:58:01 Color wheel filter change from 0 to 0 07:58:01 FLIGetFilterPos err=0 currentPosition=0 07:58:01 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:01 Filter is already there-color wheel unchanged 07:58:01 Received message from Master: op=Shutter serial=5113 07:58:01 Shutter LASER close 07:58:01 Received message from Camera: op=State serial=5115 07:58:01 GetSingleValue result=40 Value=cccccccc 07:58:01 SkyScan query 07:58:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 07:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:02 Parameters OK 07:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:02 Set A/D data flow result=40 07:58:02 Set A/D channel type result=40 07:58:02 Set A/D encoding result=40 07:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:02 Set channel filter=0.000000e+000 result=40 07:58:02 Config A/D Result=40 07:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:02 Get A/D filter: -9.255963e+061 result=40 07:58:02 Get A/D value=-858993460 result=40 07:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:02 Parameters OK 07:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:02 Set A/D data flow result=40 07:58:02 Set A/D channel type result=40 07:58:02 Set A/D encoding result=40 07:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:02 Set channel filter=0.000000e+000 result=40 07:58:02 Config A/D Result=40 07:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:02 Get A/D filter: -9.255963e+061 result=40 07:58:02 Get A/D value=-858993460 result=40 07:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:02 Aux= 07:58:02 Message to Camera, serial 5115 queued 07:58:33 Received message from Master: op=PointingHead serial=5122 07:58:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 07:58:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 07:58:33 Point started: ret=0 07:58:33 point_skyscan result=0 07:58:34 Check angles 07:58:34 SkyScan query 07:58:35 SkyScan query done: ret=0 az=109.47<-7298 ze=38.49<-9434 Statuses=0009 0008 07:58:35 Msec=0 True Az=109.47 Ze=38.49 Az status=0009 Ze status=0008 07:58:35 Check angles 07:58:35 SkyScan query 07:58:35 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 07:58:35 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 07:58:36 Check angles 07:58:36 SkyScan query 07:58:36 SkyScan query done: ret=0 az=144.285<-9619 ze=38.505<-9433 Statuses=0009 0008 07:58:36 Msec=1500 True Az=144.285 Ze=38.505 Az status=0009 Ze status=0008 07:58:36 Check angles 07:58:36 SkyScan query 07:58:37 SkyScan query done: ret=0 az=162.105<-10807 ze=38.505<-9433 Statuses=0009 0008 07:58:37 Msec=2250 True Az=162.105 Ze=38.505 Az status=0009 Ze status=0008 07:58:37 Check angles 07:58:37 SkyScan query 07:58:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 07:58:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 07:58:38 Check angles 07:58:38 SkyScan query 07:58:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 07:58:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 07:58:38 Message to Master queued w/err=0: serial=5122 error=0 07:58:43 Received message from Master: op=Filter serial=5123 07:58:43 Color wheel filter change from 0 to 0 07:58:43 FLIGetFilterPos err=0 currentPosition=0 07:58:43 FLIGetStepsRemaining err=0 RemainingSteps=0 07:58:43 Filter is already there-color wheel unchanged 07:58:44 Received message from Master: op=Shutter serial=5124 07:58:44 Shutter LASER close 07:58:44 Received message from Camera: op=State serial=5126 07:58:44 GetSingleValue result=40 Value=cccccccc 07:58:44 SkyScan query 07:58:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 07:58:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:44 Parameters OK 07:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:44 Set A/D data flow result=40 07:58:44 Set A/D channel type result=40 07:58:44 Set A/D encoding result=40 07:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:44 Set channel filter=0.000000e+000 result=40 07:58:44 Config A/D Result=40 07:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:44 Get A/D filter: -9.255963e+061 result=40 07:58:44 Get A/D value=-858993460 result=40 07:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:58:44 Parameters OK 07:58:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:58:44 Set A/D data flow result=40 07:58:44 Set A/D channel type result=40 07:58:44 Set A/D encoding result=40 07:58:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:58:44 Set channel filter=0.000000e+000 result=40 07:58:44 Config A/D Result=40 07:58:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:58:44 Get A/D filter: -9.255963e+061 result=40 07:58:44 Get A/D value=-858993460 result=40 07:58:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:58:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:58:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:58:44 Aux= 07:58:44 Message to Camera, serial 5126 queued 07:59:15 Received message from Master: op=PointingHead serial=5133 07:59:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 07:59:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 07:59:15 Point started: ret=0 07:59:15 point_skyscan result=0 07:59:16 Check angles 07:59:16 SkyScan query 07:59:17 SkyScan query done: ret=0 az=152.97<-10198 ze=8.865<-11409 Statuses=0009 0009 07:59:17 Msec=0 True Az=152.97 Ze=8.865 Az status=0009 Ze status=0009 07:59:17 Check angles 07:59:17 SkyScan query 07:59:17 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.06<-12804 Statuses=0009 0009 07:59:17 Msec=750 True Az=135.405 Ze=-12.06 Az status=0009 Ze status=0009 07:59:18 Check angles 07:59:18 SkyScan query 07:59:18 SkyScan query done: ret=0 az=117.96<-7864 ze=-33.015<-14201 Statuses=0009 0009 07:59:18 Msec=1500 True Az=117.96 Ze=-33.015 Az status=0009 Ze status=0009 07:59:18 Check angles 07:59:18 SkyScan query 07:59:19 SkyScan query done: ret=0 az=100.56<-6704 ze=-51.495<-15433 Statuses=0009 0009 07:59:19 Msec=2250 True Az=100.56 Ze=-51.495 Az status=0009 Ze status=0009 07:59:19 Check angles 07:59:19 SkyScan query 07:59:20 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 07:59:20 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 07:59:20 Check angles 07:59:20 SkyScan query 07:59:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:59:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 07:59:20 Message to Master queued w/err=0: serial=5133 error=0 07:59:25 Received message from Master: op=Filter serial=5134 07:59:25 Color wheel filter change from 0 to 0 07:59:25 FLIGetFilterPos err=0 currentPosition=0 07:59:25 FLIGetStepsRemaining err=0 RemainingSteps=0 07:59:25 Filter is already there-color wheel unchanged 07:59:26 Received message from Master: op=Shutter serial=5135 07:59:26 Shutter LASER close 07:59:26 Received message from Camera: op=State serial=5137 07:59:26 GetSingleValue result=40 Value=cccccccc 07:59:26 SkyScan query 07:59:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 07:59:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:26 Parameters OK 07:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:26 Set A/D data flow result=40 07:59:26 Set A/D channel type result=40 07:59:26 Set A/D encoding result=40 07:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:26 Set channel filter=0.000000e+000 result=40 07:59:26 Config A/D Result=40 07:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:26 Get A/D filter: -9.255963e+061 result=40 07:59:26 Get A/D value=-858993460 result=40 07:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 07:59:26 Parameters OK 07:59:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 07:59:26 Set A/D data flow result=40 07:59:26 Set A/D channel type result=40 07:59:26 Set A/D encoding result=40 07:59:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 07:59:26 Set channel filter=0.000000e+000 result=40 07:59:26 Config A/D Result=40 07:59:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 07:59:26 Get A/D filter: -9.255963e+061 result=40 07:59:26 Get A/D value=-858993460 result=40 07:59:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 07:59:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 07:59:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 07:59:26 Aux= 07:59:26 Message to Camera, serial 5137 queued 07:59:57 Received message from Master: op=PointingHead serial=5144 07:59:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 07:59:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 07:59:57 Point started: ret=0 07:59:57 point_skyscan result=0 07:59:58 Check angles 07:59:58 SkyScan query 07:59:59 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.36<-17424 Statuses=0009 0009 07:59:59 Msec=0 True Az=109.035 Ze=-81.36 Az status=0009 Ze status=0009 07:59:59 Check angles 07:59:59 SkyScan query 08:00:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 08:00:00 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 08:00:00 Check angles 08:00:00 SkyScan query 08:00:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.125<-20275 Statuses=0008 0009 08:00:00 Msec=1500 True Az=112.995 Ze=-124.125 Az status=0008 Ze status=0009 08:00:00 Check angles 08:00:00 SkyScan query 08:00:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 08:00:01 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 08:00:01 Check angles 08:00:01 SkyScan query 08:00:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 08:00:02 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 08:00:02 Check angles 08:00:02 SkyScan query 08:00:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 08:00:03 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 08:00:03 Message to Master queued w/err=0: serial=5144 error=0 08:00:08 Received message from Master: op=Filter serial=5145 08:00:08 Color wheel filter change from 0 to 0 08:00:08 FLIGetFilterPos err=0 currentPosition=0 08:00:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:08 Filter is already there-color wheel unchanged 08:00:08 Received message from Master: op=Shutter serial=5146 08:00:08 Shutter LASER open 08:00:08 Received message from Camera: op=State serial=5148 08:00:08 GetSingleValue result=40 Value=cccccccc 08:00:08 SkyScan query 08:00:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:00:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:08 Parameters OK 08:00:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:08 Set A/D data flow result=40 08:00:08 Set A/D channel type result=40 08:00:08 Set A/D encoding result=40 08:00:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:08 Set channel filter=0.000000e+000 result=40 08:00:08 Config A/D Result=40 08:00:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:08 Get A/D filter: -9.255963e+061 result=40 08:00:08 Get A/D value=-858993460 result=40 08:00:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:08 Parameters OK 08:00:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:08 Set A/D data flow result=40 08:00:08 Set A/D channel type result=40 08:00:08 Set A/D encoding result=40 08:00:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:08 Set channel filter=0.000000e+000 result=40 08:00:08 Config A/D Result=40 08:00:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:08 Get A/D filter: -9.255963e+061 result=40 08:00:08 Get A/D value=-858993460 result=40 08:00:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:08 Aux= 08:00:08 Message to Camera, serial 5148 queued 08:00:11 Received message from Master: op=Shutter serial=5152 08:00:11 Shutter LASER close 08:00:11 Received message from Master: op=PointingHead serial=5156 08:00:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:00:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:00:12 Point started: ret=0 08:00:12 point_skyscan result=0 08:00:12 Check angles 08:00:12 SkyScan query 08:00:13 SkyScan query done: ret=0 az=89.67<-5978 ze=156.99<-1534 Statuses=0009 0009 08:00:13 Msec=0 True Az=89.67 Ze=156.99 Az status=0009 Ze status=0009 08:00:13 Check angles 08:00:13 SkyScan query 08:00:14 SkyScan query done: ret=0 az=72.135<-4809 ze=136.02<-2932 Statuses=0009 0009 08:00:14 Msec=750 True Az=72.135 Ze=136.02 Az status=0009 Ze status=0009 08:00:14 Check angles 08:00:14 SkyScan query 08:00:15 SkyScan query done: ret=0 az=54.75<-3650 ze=115.08<-4328 Statuses=0009 0009 08:00:15 Msec=1500 True Az=54.75 Ze=115.08 Az status=0009 Ze status=0009 08:00:15 Check angles 08:00:15 SkyScan query 08:00:15 SkyScan query done: ret=0 az=40.86<-2724 ze=94.11<-5726 Statuses=0009 0009 08:00:15 Msec=2250 True Az=40.86 Ze=94.11 Az status=0009 Ze status=0009 08:00:15 Check angles 08:00:15 SkyScan query 08:00:16 SkyScan query done: ret=0 az=40.995<-2733 ze=73.155<-7123 Statuses=0008 0009 08:00:16 Msec=3000 True Az=40.995 Ze=73.155 Az status=0008 Ze status=0009 08:00:16 Check angles 08:00:16 SkyScan query 08:00:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 08:00:17 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 08:00:17 Check angles 08:00:17 SkyScan query 08:00:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:00:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:00:18 Message to Master queued w/err=0: serial=5156 error=0 08:00:23 Received message from Master: op=Filter serial=5157 08:00:23 Color wheel filter change from 0 to 0 08:00:23 FLIGetFilterPos err=0 currentPosition=0 08:00:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:00:23 Filter is already there-color wheel unchanged 08:00:23 Received message from Master: op=Shutter serial=5158 08:00:23 Shutter LASER close 08:00:23 Received message from Camera: op=State serial=5160 08:00:23 GetSingleValue result=40 Value=cccccccc 08:00:23 SkyScan query 08:00:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:00:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:23 Parameters OK 08:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:23 Set A/D data flow result=40 08:00:23 Set A/D channel type result=40 08:00:23 Set A/D encoding result=40 08:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:23 Set channel filter=0.000000e+000 result=40 08:00:23 Config A/D Result=40 08:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:23 Get A/D filter: -9.255963e+061 result=40 08:00:23 Get A/D value=-858993460 result=40 08:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:00:23 Parameters OK 08:00:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:00:23 Set A/D data flow result=40 08:00:23 Set A/D channel type result=40 08:00:23 Set A/D encoding result=40 08:00:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:00:23 Set channel filter=0.000000e+000 result=40 08:00:23 Config A/D Result=40 08:00:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:00:23 Get A/D filter: -9.255963e+061 result=40 08:00:23 Get A/D value=-858993460 result=40 08:00:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:00:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:00:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:00:23 Aux= [UTC 2018-12-4 08:00:23] 08:00:23 Message to Camera, serial 5160 queued 08:00:54 Received message from Master: op=PointingHead serial=5167 08:00:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:00:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:00:55 Point started: ret=0 08:00:55 point_skyscan result=0 08:00:55 Check angles 08:00:55 SkyScan query 08:00:56 SkyScan query done: ret=0 az=63.87<-4258 ze=66.555<-7563 Statuses=0009 0008 08:00:56 Msec=0 True Az=63.87 Ze=66.555 Az status=0009 Ze status=0008 08:00:56 Check angles 08:00:56 SkyScan query 08:00:57 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 08:00:57 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 08:00:57 Check angles 08:00:57 SkyScan query 08:00:57 SkyScan query done: ret=0 az=99.105<-6607 ze=66.495<-7567 Statuses=0009 0008 08:00:57 Msec=1500 True Az=99.105 Ze=66.495 Az status=0009 Ze status=0008 08:00:58 Check angles 08:00:58 SkyScan query 08:00:58 SkyScan query done: ret=0 az=116.355<-7757 ze=66.495<-7567 Statuses=0009 0008 08:00:58 Msec=2250 True Az=116.355 Ze=66.495 Az status=0009 Ze status=0008 08:00:58 Check angles 08:00:58 SkyScan query 08:00:59 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 08:00:59 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 08:00:59 Check angles 08:00:59 SkyScan query 08:01:00 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 08:01:00 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 08:01:00 Check angles 08:01:00 SkyScan query 08:01:00 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:01:00 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:01:00 Message to Master queued w/err=0: serial=5167 error=0 08:01:05 Received message from Master: op=Filter serial=5168 08:01:05 Color wheel filter change from 0 to 0 08:01:05 FLIGetFilterPos err=0 currentPosition=0 08:01:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:05 Filter is already there-color wheel unchanged 08:01:06 Received message from Master: op=Shutter serial=5169 08:01:06 Shutter LASER close 08:01:06 Received message from Camera: op=State serial=5171 08:01:06 GetSingleValue result=40 Value=cccccccc 08:01:06 SkyScan query 08:01:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:01:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:06 Parameters OK 08:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:06 Set A/D data flow result=40 08:01:06 Set A/D channel type result=40 08:01:06 Set A/D encoding result=40 08:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:06 Set channel filter=0.000000e+000 result=40 08:01:06 Config A/D Result=40 08:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:06 Get A/D filter: -9.255963e+061 result=40 08:01:06 Get A/D value=-858993460 result=40 08:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:06 Parameters OK 08:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:06 Set A/D data flow result=40 08:01:06 Set A/D channel type result=40 08:01:06 Set A/D encoding result=40 08:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:06 Set channel filter=0.000000e+000 result=40 08:01:06 Config A/D Result=40 08:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:06 Get A/D filter: -9.255963e+061 result=40 08:01:06 Get A/D value=-858993460 result=40 08:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:06 Aux= 08:01:06 Message to Camera, serial 5171 queued 08:01:37 Received message from Master: op=PointingHead serial=5178 08:01:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:01:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:01:38 Point started: ret=0 08:01:38 point_skyscan result=0 08:01:38 Check angles 08:01:38 SkyScan query 08:01:39 SkyScan query done: ret=0 az=134.745<-8983 ze=36.66<-9556 Statuses=0009 0009 08:01:39 Msec=0 True Az=134.745 Ze=36.66 Az status=0009 Ze status=0009 08:01:39 Check angles 08:01:39 SkyScan query 08:01:40 SkyScan query done: ret=0 az=117.255<-7817 ze=15.69<-10954 Statuses=0009 0009 08:01:40 Msec=750 True Az=117.255 Ze=15.69 Az status=0009 Ze status=0009 08:01:40 Check angles 08:01:40 SkyScan query 08:01:40 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.265<-12351 Statuses=0009 0009 08:01:40 Msec=1500 True Az=99.855 Ze=-5.265 Az status=0009 Ze status=0009 08:01:41 Check angles 08:01:41 SkyScan query 08:01:41 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.655<-13777 Statuses=0009 0009 08:01:41 Msec=2250 True Az=82.05 Ze=-26.655 Az status=0009 Ze status=0009 08:01:41 Check angles 08:01:41 SkyScan query 08:01:42 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 08:01:42 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 08:01:42 Check angles 08:01:42 SkyScan query 08:01:43 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 08:01:43 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 08:01:43 Check angles 08:01:43 SkyScan query 08:01:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:01:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:01:43 Message to Master queued w/err=0: serial=5178 error=0 08:01:48 Received message from Master: op=Filter serial=5179 08:01:48 Color wheel filter change from 0 to 0 08:01:48 FLIGetFilterPos err=0 currentPosition=0 08:01:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:01:48 Filter is already there-color wheel unchanged 08:01:49 Received message from Master: op=Shutter serial=5180 08:01:49 Shutter LASER close 08:01:49 Received message from Camera: op=State serial=5182 08:01:49 GetSingleValue result=40 Value=cccccccc 08:01:49 SkyScan query 08:01:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:01:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:49 Parameters OK 08:01:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:49 Set A/D data flow result=40 08:01:49 Set A/D channel type result=40 08:01:49 Set A/D encoding result=40 08:01:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:49 Set channel filter=0.000000e+000 result=40 08:01:49 Config A/D Result=40 08:01:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:49 Get A/D filter: -9.255963e+061 result=40 08:01:49 Get A/D value=-858993460 result=40 08:01:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:01:49 Parameters OK 08:01:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:01:49 Set A/D data flow result=40 08:01:49 Set A/D channel type result=40 08:01:49 Set A/D encoding result=40 08:01:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:01:49 Set channel filter=0.000000e+000 result=40 08:01:49 Config A/D Result=40 08:01:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:01:49 Get A/D filter: -9.255963e+061 result=40 08:01:49 Get A/D value=-858993460 result=40 08:01:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:01:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:01:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:01:49 Aux= 08:01:49 Message to Camera, serial 5182 queued 08:02:20 Received message from Master: op=PointingHead serial=5189 08:02:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:02:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:02:20 Point started: ret=0 08:02:20 point_skyscan result=0 08:02:21 Check angles 08:02:21 SkyScan query 08:02:22 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.325<-16555 Statuses=0009 0009 08:02:22 Msec=0 True Az=63.975 Ze=-68.325 Az status=0009 Ze status=0009 08:02:22 Check angles 08:02:22 SkyScan query 08:02:22 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.715<-17981 Statuses=0009 0009 08:02:22 Msec=750 True Az=82.08 Ze=-89.715 Az status=0009 Ze status=0009 08:02:23 Check angles 08:02:23 SkyScan query 08:02:23 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.67<-19378 Statuses=0009 0009 08:02:23 Msec=1500 True Az=99.555 Ze=-110.67 Az status=0009 Ze status=0009 08:02:23 Check angles 08:02:23 SkyScan query 08:02:24 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.61<-20774 Statuses=0009 0009 08:02:24 Msec=2250 True Az=116.97 Ze=-131.61 Az status=0009 Ze status=0009 08:02:24 Check angles 08:02:24 SkyScan query 08:02:25 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 08:02:25 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 08:02:25 Check angles 08:02:25 SkyScan query 08:02:26 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:02:26 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:02:26 Message to Master queued w/err=0: serial=5189 error=0 08:02:31 Received message from Master: op=Filter serial=5190 08:02:31 Color wheel filter change from 0 to 0 08:02:31 FLIGetFilterPos err=0 currentPosition=0 08:02:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:02:31 Filter is already there-color wheel unchanged 08:02:31 Received message from Master: op=Shutter serial=5191 08:02:31 Shutter LASER close 08:02:31 Received message from Camera: op=State serial=5193 08:02:31 GetSingleValue result=40 Value=cccccccc 08:02:31 SkyScan query 08:02:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:02:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:31 Parameters OK 08:02:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:31 Set A/D data flow result=40 08:02:31 Set A/D channel type result=40 08:02:31 Set A/D encoding result=40 08:02:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:31 Set channel filter=0.000000e+000 result=40 08:02:31 Config A/D Result=40 08:02:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:31 Get A/D filter: -9.255963e+061 result=40 08:02:31 Get A/D value=-858993460 result=40 08:02:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:02:31 Parameters OK 08:02:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:02:31 Set A/D data flow result=40 08:02:31 Set A/D channel type result=40 08:02:31 Set A/D encoding result=40 08:02:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:02:31 Set channel filter=0.000000e+000 result=40 08:02:31 Config A/D Result=40 08:02:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:02:31 Get A/D filter: -9.255963e+061 result=40 08:02:31 Get A/D value=-858993460 result=40 08:02:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:02:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:02:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:02:31 Aux= 08:02:31 Message to Camera, serial 5193 queued 08:03:02 Received message from Master: op=PointingHead serial=5200 08:03:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:03:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:03:02 Point started: ret=0 08:03:02 point_skyscan result=0 08:03:03 Check angles 08:03:03 SkyScan query 08:03:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 08:03:04 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 08:03:04 Check angles 08:03:04 SkyScan query 08:03:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:03:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:03:05 Message to Master queued w/err=0: serial=5200 error=0 08:03:10 Received message from Master: op=Filter serial=5201 08:03:10 Color wheel filter change from 0 to 0 08:03:10 FLIGetFilterPos err=0 currentPosition=0 08:03:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:10 Filter is already there-color wheel unchanged 08:03:10 Received message from Master: op=Shutter serial=5202 08:03:10 Shutter LASER open 08:03:10 Received message from Camera: op=State serial=5204 08:03:10 GetSingleValue result=40 Value=cccccccc 08:03:10 SkyScan query 08:03:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:03:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:11 Parameters OK 08:03:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:11 Set A/D data flow result=40 08:03:11 Set A/D channel type result=40 08:03:11 Set A/D encoding result=40 08:03:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:11 Set channel filter=0.000000e+000 result=40 08:03:11 Config A/D Result=40 08:03:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:11 Get A/D filter: -9.255963e+061 result=40 08:03:11 Get A/D value=-858993460 result=40 08:03:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:11 Aux= 08:03:11 Message to Camera, serial 5204 queued 08:03:13 Received message from Master: op=Shutter serial=5208 08:03:13 Shutter LASER close 08:03:14 Received message from Master: op=PointingHead serial=5212 08:03:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:03:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:03:14 Point started: ret=0 08:03:14 point_skyscan result=0 08:03:15 Check angles 08:03:15 SkyScan query 08:03:15 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.445<-21563 Statuses=0009 0009 08:03:15 Msec=0 True Az=135.735 Ze=-143.445 Az status=0009 Ze status=0009 08:03:15 Check angles 08:03:15 SkyScan query 08:03:16 SkyScan query done: ret=0 az=153.6<-10240 ze=-122.055<-20137 Statuses=0009 0009 08:03:16 Msec=750 True Az=153.6 Ze=-122.055 Az status=0009 Ze status=0009 08:03:16 Check angles 08:03:16 SkyScan query 08:03:17 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.68<-18712 Statuses=0009 0009 08:03:17 Msec=1500 True Az=171.405 Ze=-100.68 Az status=0009 Ze status=0009 08:03:17 Check angles 08:03:17 SkyScan query 08:03:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.725<-17315 Statuses=0008 0009 08:03:18 Msec=2250 True Az=176.01 Ze=-79.725 Az status=0008 Ze status=0009 08:03:18 Check angles 08:03:18 SkyScan query 08:03:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.755<-15917 Statuses=0008 0009 08:03:18 Msec=3000 True Az=175.995 Ze=-58.755 Az status=0008 Ze status=0009 08:03:18 Check angles 08:03:18 SkyScan query 08:03:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:03:19 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:03:19 Message to Master queued w/err=0: serial=5212 error=0 08:03:24 Received message from Master: op=Filter serial=5213 08:03:24 Color wheel filter change from 0 to 0 08:03:24 FLIGetFilterPos err=0 currentPosition=0 08:03:24 FLIGetStepsRemaining err=0 RemainingSteps=0 08:03:24 Filter is already there-color wheel unchanged 08:03:24 Received message from Master: op=Shutter serial=5214 08:03:24 Shutter LASER close 08:03:24 Received message from Camera: op=State serial=5216 08:03:24 GetSingleValue result=40 Value=cccccccc 08:03:24 SkyScan query 08:03:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:03:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:25 Parameters OK 08:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:25 Set A/D data flow result=40 08:03:25 Set A/D channel type result=40 08:03:25 Set A/D encoding result=40 08:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:25 Set channel filter=0.000000e+000 result=40 08:03:25 Config A/D Result=40 08:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:25 Get A/D filter: -9.255963e+061 result=40 08:03:25 Get A/D value=-858993460 result=40 08:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:03:25 Parameters OK 08:03:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:03:25 Set A/D data flow result=40 08:03:25 Set A/D channel type result=40 08:03:25 Set A/D encoding result=40 08:03:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:03:25 Set channel filter=0.000000e+000 result=40 08:03:25 Config A/D Result=40 08:03:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:03:25 Get A/D filter: -9.255963e+061 result=40 08:03:25 Get A/D value=-858993460 result=40 08:03:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:03:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:03:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:03:25 Aux= 08:03:25 Message to Camera, serial 5216 queued 08:03:56 Received message from Master: op=PointingHead serial=5223 08:03:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:03:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:03:56 Point started: ret=0 08:03:56 point_skyscan result=0 08:03:57 Check angles 08:03:57 SkyScan query 08:03:57 SkyScan query done: ret=0 az=153.225<-10215 ze=-21.975<-13465 Statuses=0009 0009 08:03:57 Msec=0 True Az=153.225 Ze=-21.975 Az status=0009 Ze status=0009 08:03:58 Check angles 08:03:58 SkyScan query 08:03:58 SkyScan query done: ret=0 az=135.765<-9051 ze=-1.05<-12070 Statuses=0009 0009 08:03:58 Msec=750 True Az=135.765 Ze=-1.05 Az status=0009 Ze status=0009 08:03:58 Check angles 08:03:58 SkyScan query 08:03:59 SkyScan query done: ret=0 az=118.26<-7884 ze=19.92<-10672 Statuses=0009 0009 08:03:59 Msec=1500 True Az=118.26 Ze=19.92 Az status=0009 Ze status=0009 08:03:59 Check angles 08:03:59 SkyScan query 08:04:00 SkyScan query done: ret=0 az=100.83<-6722 ze=40.86<-9276 Statuses=0009 0009 08:04:00 Msec=2250 True Az=100.83 Ze=40.86 Az status=0009 Ze status=0009 08:04:00 Check angles 08:04:00 SkyScan query 08:04:00 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:04:00 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:04:01 Check angles 08:04:01 SkyScan query 08:04:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:04:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:04:01 Message to Master queued w/err=0: serial=5223 error=0 08:04:06 Received message from Master: op=Filter serial=5224 08:04:06 Color wheel filter change from 0 to 0 08:04:06 FLIGetFilterPos err=0 currentPosition=0 08:04:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:06 Filter is already there-color wheel unchanged 08:04:06 Received message from Master: op=Shutter serial=5225 08:04:06 Shutter LASER close 08:04:06 Received message from Camera: op=State serial=5227 08:04:06 GetSingleValue result=40 Value=cccccccc 08:04:06 SkyScan query 08:04:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:04:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:07 Parameters OK 08:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:07 Set A/D data flow result=40 08:04:07 Set A/D channel type result=40 08:04:07 Set A/D encoding result=40 08:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:07 Set channel filter=0.000000e+000 result=40 08:04:07 Config A/D Result=40 08:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:07 Get A/D filter: -9.255963e+061 result=40 08:04:07 Get A/D value=-858993460 result=40 08:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:07 Parameters OK 08:04:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:07 Set A/D data flow result=40 08:04:07 Set A/D channel type result=40 08:04:07 Set A/D encoding result=40 08:04:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:07 Set channel filter=0.000000e+000 result=40 08:04:07 Config A/D Result=40 08:04:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:07 Get A/D filter: -9.255963e+061 result=40 08:04:07 Get A/D value=-858993460 result=40 08:04:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:07 Aux= 08:04:07 Message to Camera, serial 5227 queued 08:04:38 Received message from Master: op=PointingHead serial=5234 08:04:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:04:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:04:38 Point started: ret=0 08:04:38 point_skyscan result=0 08:04:39 Check angles 08:04:39 SkyScan query 08:04:40 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 08:04:40 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 08:04:40 Check angles 08:04:40 SkyScan query 08:04:40 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 08:04:40 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 08:04:40 Check angles 08:04:40 SkyScan query 08:04:41 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 08:04:41 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 08:04:41 Check angles 08:04:41 SkyScan query 08:04:42 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 08:04:42 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 08:04:42 Check angles 08:04:42 SkyScan query 08:04:43 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 08:04:43 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 08:04:43 Check angles 08:04:43 SkyScan query 08:04:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:04:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:04:43 Message to Master queued w/err=0: serial=5234 error=0 08:04:48 Received message from Master: op=Filter serial=5235 08:04:48 Color wheel filter change from 0 to 0 08:04:48 FLIGetFilterPos err=0 currentPosition=0 08:04:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:04:48 Filter is already there-color wheel unchanged 08:04:48 Received message from Master: op=Shutter serial=5236 08:04:48 Shutter LASER close 08:04:49 Received message from Camera: op=State serial=5238 08:04:49 GetSingleValue result=40 Value=cccccccc 08:04:49 SkyScan query 08:04:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:04:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:49 Parameters OK 08:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:49 Set A/D data flow result=40 08:04:49 Set A/D channel type result=40 08:04:49 Set A/D encoding result=40 08:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:49 Set channel filter=0.000000e+000 result=40 08:04:49 Config A/D Result=40 08:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:49 Get A/D filter: -9.255963e+061 result=40 08:04:49 Get A/D value=-858993460 result=40 08:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:04:49 Parameters OK 08:04:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:04:49 Set A/D data flow result=40 08:04:49 Set A/D channel type result=40 08:04:49 Set A/D encoding result=40 08:04:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:04:49 Set channel filter=0.000000e+000 result=40 08:04:49 Config A/D Result=40 08:04:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:04:49 Get A/D filter: -9.255963e+061 result=40 08:04:49 Get A/D value=-858993460 result=40 08:04:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:04:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:04:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:04:49 Aux= 08:04:49 Message to Camera, serial 5238 queued 08:05:20 Received message from Master: op=PointingHead serial=5245 08:05:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:05:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:05:20 Point started: ret=0 08:05:20 point_skyscan result=0 08:05:21 Check angles 08:05:21 SkyScan query 08:05:22 SkyScan query done: ret=0 az=152.31<-10154 ze=8.19<-11454 Statuses=0009 0009 08:05:22 Msec=0 True Az=152.31 Ze=8.19 Az status=0009 Ze status=0009 08:05:22 Check angles 08:05:22 SkyScan query 08:05:22 SkyScan query done: ret=0 az=134.43<-8962 ze=-13.215<-12881 Statuses=0009 0009 08:05:22 Msec=750 True Az=134.43 Ze=-13.215 Az status=0009 Ze status=0009 08:05:23 Check angles 08:05:23 SkyScan query 08:05:23 SkyScan query done: ret=0 az=117.06<-7804 ze=-34.14<-14276 Statuses=0009 0009 08:05:23 Msec=1500 True Az=117.06 Ze=-34.14 Az status=0009 Ze status=0009 08:05:23 Check angles 08:05:23 SkyScan query 08:05:24 SkyScan query done: ret=0 az=99.615<-6641 ze=-51.54<-15436 Statuses=0009 0009 08:05:24 Msec=2250 True Az=99.615 Ze=-51.54 Az status=0009 Ze status=0009 08:05:24 Check angles 08:05:24 SkyScan query 08:05:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:05:25 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:05:25 Check angles 08:05:25 SkyScan query 08:05:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:05:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:05:25 Message to Master queued w/err=0: serial=5245 error=0 08:05:30 Received message from Master: op=Filter serial=5246 08:05:30 Color wheel filter change from 0 to 0 08:05:30 FLIGetFilterPos err=0 currentPosition=0 08:05:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:05:30 Filter is already there-color wheel unchanged 08:05:31 Received message from Master: op=Shutter serial=5247 08:05:31 Shutter LASER close 08:05:31 Received message from Camera: op=State serial=5249 08:05:31 GetSingleValue result=40 Value=cccccccc 08:05:31 SkyScan query 08:05:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:05:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:31 Parameters OK 08:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:31 Set A/D data flow result=40 08:05:31 Set A/D channel type result=40 08:05:31 Set A/D encoding result=40 08:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:31 Set channel filter=0.000000e+000 result=40 08:05:31 Config A/D Result=40 08:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:31 Get A/D filter: -9.255963e+061 result=40 08:05:31 Get A/D value=-858993460 result=40 08:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:05:31 Parameters OK 08:05:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:05:31 Set A/D data flow result=40 08:05:31 Set A/D channel type result=40 08:05:31 Set A/D encoding result=40 08:05:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:05:31 Set channel filter=0.000000e+000 result=40 08:05:31 Config A/D Result=40 08:05:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:05:31 Get A/D filter: -9.255963e+061 result=40 08:05:31 Get A/D value=-858993460 result=40 08:05:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:05:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:05:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:05:31 Aux= 08:05:31 Message to Camera, serial 5249 queued 08:06:02 Received message from Master: op=PointingHead serial=5256 08:06:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:06:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:06:02 Point started: ret=0 08:06:02 point_skyscan result=0 08:06:03 Check angles 08:06:03 SkyScan query 08:06:04 SkyScan query done: ret=0 az=108.75<-7250 ze=-81<-17400 Statuses=0009 0009 08:06:04 Msec=0 True Az=108.75 Ze=-81 Az status=0009 Ze status=0009 08:06:04 Check angles 08:06:04 SkyScan query 08:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 08:06:05 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 08:06:05 Check angles 08:06:05 SkyScan query 08:06:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 08:06:05 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 08:06:05 Check angles 08:06:05 SkyScan query 08:06:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 08:06:06 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 08:06:06 Check angles 08:06:06 SkyScan query 08:06:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.255<-23017 Statuses=0008 0009 08:06:07 Msec=3000 True Az=112.995 Ze=-165.255 Az status=0008 Ze status=0009 08:06:07 Check angles 08:06:07 SkyScan query 08:06:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 08:06:08 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 08:06:08 Message to Master queued w/err=0: serial=5256 error=0 08:06:13 Received message from Master: op=Filter serial=5257 08:06:13 Color wheel filter change from 0 to 0 08:06:13 FLIGetFilterPos err=0 currentPosition=0 08:06:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:13 Filter is already there-color wheel unchanged 08:06:13 Received message from Master: op=Shutter serial=5258 08:06:13 Shutter LASER open 08:06:13 Received message from Camera: op=State serial=5260 08:06:13 GetSingleValue result=40 Value=cccccccc 08:06:13 SkyScan query 08:06:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:06:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:13 Parameters OK 08:06:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:13 Set A/D data flow result=40 08:06:13 Set A/D channel type result=40 08:06:13 Set A/D encoding result=40 08:06:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:13 Set channel filter=0.000000e+000 result=40 08:06:13 Config A/D Result=40 08:06:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:13 Get A/D filter: -9.255963e+061 result=40 08:06:13 Get A/D value=-858993460 result=40 08:06:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:13 Parameters OK 08:06:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:13 Set A/D data flow result=40 08:06:13 Set A/D channel type result=40 08:06:13 Set A/D encoding result=40 08:06:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:13 Set channel filter=0.000000e+000 result=40 08:06:13 Config A/D Result=40 08:06:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:13 Get A/D filter: -9.255963e+061 result=40 08:06:13 Get A/D value=-858993460 result=40 08:06:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:13 Aux= 08:06:13 Message to Camera, serial 5260 queued 08:06:16 Received message from Master: op=Shutter serial=5264 08:06:16 Shutter LASER close 08:06:16 Received message from Master: op=PointingHead serial=5268 08:06:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:06:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:06:17 Point started: ret=0 08:06:17 point_skyscan result=0 08:06:18 Check angles 08:06:18 SkyScan query 08:06:18 SkyScan query done: ret=0 az=89.85<-5990 ze=157.125<-1525 Statuses=0009 0009 08:06:18 Msec=0 True Az=89.85 Ze=157.125 Az status=0009 Ze status=0009 08:06:18 Check angles 08:06:18 SkyScan query 08:06:19 SkyScan query done: ret=0 az=72.375<-4825 ze=136.155<-2923 Statuses=0009 0009 08:06:19 Msec=750 True Az=72.375 Ze=136.155 Az status=0009 Ze status=0009 08:06:19 Check angles 08:06:19 SkyScan query 08:06:20 SkyScan query done: ret=0 az=54.66<-3644 ze=114.795<-4347 Statuses=0009 0009 08:06:20 Msec=1500 True Az=54.66 Ze=114.795 Az status=0009 Ze status=0009 08:06:20 Check angles 08:06:20 SkyScan query 08:06:20 SkyScan query done: ret=0 az=40.965<-2731 ze=93.375<-5775 Statuses=0009 0009 08:06:20 Msec=2250 True Az=40.965 Ze=93.375 Az status=0009 Ze status=0009 08:06:21 Check angles 08:06:21 SkyScan query 08:06:21 SkyScan query done: ret=0 az=40.995<-2733 ze=71.955<-7203 Statuses=0008 0009 08:06:21 Msec=3000 True Az=40.995 Ze=71.955 Az status=0008 Ze status=0009 08:06:21 Check angles 08:06:21 SkyScan query 08:06:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.05<-8530 Statuses=0008 0009 08:06:22 Msec=3750 True Az=40.995 Ze=52.05 Az status=0008 Ze status=0009 08:06:22 Check angles 08:06:22 SkyScan query 08:06:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:06:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:06:23 Message to Master queued w/err=0: serial=5268 error=0 08:06:28 Received message from Master: op=Filter serial=5269 08:06:28 Color wheel filter change from 0 to 0 08:06:28 FLIGetFilterPos err=0 currentPosition=0 08:06:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:06:28 Filter is already there-color wheel unchanged 08:06:28 Received message from Master: op=Shutter serial=5270 08:06:28 Shutter LASER close 08:06:28 Received message from Camera: op=State serial=5272 08:06:28 GetSingleValue result=40 Value=cccccccc 08:06:28 SkyScan query 08:06:29 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:06:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:29 Parameters OK 08:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:29 Set A/D data flow result=40 08:06:29 Set A/D channel type result=40 08:06:29 Set A/D encoding result=40 08:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:29 Set channel filter=0.000000e+000 result=40 08:06:29 Config A/D Result=40 08:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:29 Get A/D filter: -9.255963e+061 result=40 08:06:29 Get A/D value=-858993460 result=40 08:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:06:29 Parameters OK 08:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:06:29 Set A/D data flow result=40 08:06:29 Set A/D channel type result=40 08:06:29 Set A/D encoding result=40 08:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:06:29 Set channel filter=0.000000e+000 result=40 08:06:29 Config A/D Result=40 08:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:06:29 Get A/D filter: -9.255963e+061 result=40 08:06:29 Get A/D value=-858993460 result=40 08:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:06:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:06:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:06:29 Aux= 08:06:29 Message to Camera, serial 5272 queued 08:06:59 Received message from Master: op=PointingHead serial=5279 08:06:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:06:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:07:00 Point started: ret=0 08:07:00 point_skyscan result=0 08:07:01 Check angles 08:07:01 SkyScan query 08:07:01 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 08:07:01 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 08:07:01 Check angles 08:07:01 SkyScan query 08:07:02 SkyScan query done: ret=0 az=82.38<-5492 ze=66.495<-7567 Statuses=0009 0008 08:07:02 Msec=750 True Az=82.38 Ze=66.495 Az status=0009 Ze status=0008 08:07:02 Check angles 08:07:02 SkyScan query 08:07:03 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 08:07:03 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 08:07:03 Check angles 08:07:03 SkyScan query 08:07:03 SkyScan query done: ret=0 az=117.225<-7815 ze=66.495<-7567 Statuses=0009 0008 08:07:03 Msec=2250 True Az=117.225 Ze=66.495 Az status=0009 Ze status=0008 08:07:04 Check angles 08:07:04 SkyScan query 08:07:04 SkyScan query done: ret=0 az=135.105<-9007 ze=66.495<-7567 Statuses=0009 0008 08:07:04 Msec=3000 True Az=135.105 Ze=66.495 Az status=0009 Ze status=0008 08:07:04 Check angles 08:07:04 SkyScan query 08:07:05 SkyScan query done: ret=0 az=152.79<-10186 ze=66.495<-7567 Statuses=0009 0008 08:07:05 Msec=3750 True Az=152.79 Ze=66.495 Az status=0009 Ze status=0008 08:07:05 Check angles 08:07:05 SkyScan query 08:07:06 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:07:06 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:07:06 Message to Master queued w/err=0: serial=5279 error=0 08:07:11 Received message from Master: op=Filter serial=5280 08:07:11 Color wheel filter change from 0 to 0 08:07:11 FLIGetFilterPos err=0 currentPosition=0 08:07:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:11 Filter is already there-color wheel unchanged 08:07:11 Received message from Master: op=Shutter serial=5281 08:07:11 Shutter LASER close 08:07:11 Received message from Camera: op=State serial=5283 08:07:11 GetSingleValue result=40 Value=cccccccc 08:07:11 SkyScan query 08:07:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:07:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:11 Parameters OK 08:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:11 Set A/D data flow result=40 08:07:11 Set A/D channel type result=40 08:07:11 Set A/D encoding result=40 08:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:11 Set channel filter=0.000000e+000 result=40 08:07:11 Config A/D Result=40 08:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:11 Get A/D filter: -9.255963e+061 result=40 08:07:11 Get A/D value=-858993460 result=40 08:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:11 Parameters OK 08:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:11 Set A/D data flow result=40 08:07:11 Set A/D channel type result=40 08:07:11 Set A/D encoding result=40 08:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:11 Set channel filter=0.000000e+000 result=40 08:07:11 Config A/D Result=40 08:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:11 Get A/D filter: -9.255963e+061 result=40 08:07:11 Get A/D value=-858993460 result=40 08:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:11 Aux= 08:07:11 Message to Camera, serial 5283 queued 08:07:42 Received message from Master: op=PointingHead serial=5290 08:07:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:07:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:07:43 Point started: ret=0 08:07:43 point_skyscan result=0 08:07:43 Check angles 08:07:43 SkyScan query 08:07:44 SkyScan query done: ret=0 az=134.82<-8988 ze=36.525<-9565 Statuses=0009 0009 08:07:44 Msec=0 True Az=134.82 Ze=36.525 Az status=0009 Ze status=0009 08:07:44 Check angles 08:07:44 SkyScan query 08:07:45 SkyScan query done: ret=0 az=117.345<-7823 ze=15.585<-10961 Statuses=0009 0009 08:07:45 Msec=750 True Az=117.345 Ze=15.585 Az status=0009 Ze status=0009 08:07:45 Check angles 08:07:45 SkyScan query 08:07:45 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.385<-12359 Statuses=0009 0009 08:07:45 Msec=1500 True Az=99.945 Ze=-5.385 Az status=0009 Ze status=0009 08:07:46 Check angles 08:07:46 SkyScan query 08:07:46 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.775<-13785 Statuses=0009 0009 08:07:46 Msec=2250 True Az=82.08 Ze=-26.775 Az status=0009 Ze status=0009 08:07:46 Check angles 08:07:46 SkyScan query 08:07:47 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 08:07:47 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 08:07:47 Check angles 08:07:47 SkyScan query 08:07:48 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.535<-14569 Statuses=0009 0008 08:07:48 Msec=3750 True Az=47.145 Ze=-38.535 Az status=0009 Ze status=0008 08:07:48 Check angles 08:07:48 SkyScan query 08:07:49 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 08:07:49 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 08:07:49 Message to Master queued w/err=0: serial=5290 error=0 08:07:54 Received message from Master: op=Filter serial=5291 08:07:54 Color wheel filter change from 0 to 0 08:07:54 FLIGetFilterPos err=0 currentPosition=0 08:07:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:07:54 Filter is already there-color wheel unchanged 08:07:54 Received message from Master: op=Shutter serial=5292 08:07:54 Shutter LASER close 08:07:54 Received message from Camera: op=State serial=5294 08:07:54 GetSingleValue result=40 Value=cccccccc 08:07:54 SkyScan query 08:07:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:07:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:54 Parameters OK 08:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:54 Set A/D data flow result=40 08:07:54 Set A/D channel type result=40 08:07:54 Set A/D encoding result=40 08:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:54 Set channel filter=0.000000e+000 result=40 08:07:54 Config A/D Result=40 08:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:54 Get A/D filter: -9.255963e+061 result=40 08:07:54 Get A/D value=-858993460 result=40 08:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:07:54 Parameters OK 08:07:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:07:54 Set A/D data flow result=40 08:07:54 Set A/D channel type result=40 08:07:54 Set A/D encoding result=40 08:07:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:07:54 Set channel filter=0.000000e+000 result=40 08:07:54 Config A/D Result=40 08:07:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:07:54 Get A/D filter: -9.255963e+061 result=40 08:07:54 Get A/D value=-858993460 result=40 08:07:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:07:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:07:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:07:54 Aux= 08:07:54 Message to Camera, serial 5294 queued 08:08:25 Received message from Master: op=PointingHead serial=5301 08:08:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:08:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:08:26 Point started: ret=0 08:08:26 point_skyscan result=0 08:08:26 Check angles 08:08:26 SkyScan query 08:08:27 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.355<-16557 Statuses=0009 0009 08:08:27 Msec=0 True Az=63.93 Ze=-68.355 Az status=0009 Ze status=0009 08:08:27 Check angles 08:08:27 SkyScan query 08:08:28 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.325<-17955 Statuses=0009 0009 08:08:28 Msec=750 True Az=81.63 Ze=-89.325 Az status=0009 Ze status=0009 08:08:28 Check angles 08:08:28 SkyScan query 08:08:28 SkyScan query done: ret=0 az=99.135<-6609 ze=-110.265<-19351 Statuses=0009 0009 08:08:28 Msec=1500 True Az=99.135 Ze=-110.265 Az status=0009 Ze status=0009 08:08:29 Check angles 08:08:29 SkyScan query 08:08:29 SkyScan query done: ret=0 az=116.91<-7794 ze=-131.64<-20776 Statuses=0009 0009 08:08:29 Msec=2250 True Az=116.91 Ze=-131.64 Az status=0009 Ze status=0009 08:08:29 Check angles 08:08:29 SkyScan query 08:08:30 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 08:08:30 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 08:08:30 Check angles 08:08:30 SkyScan query 08:08:31 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:08:31 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:08:31 Message to Master queued w/err=0: serial=5301 error=0 08:08:36 Received message from Master: op=Filter serial=5302 08:08:36 Color wheel filter change from 0 to 0 08:08:36 FLIGetFilterPos err=0 currentPosition=0 08:08:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:08:36 Filter is already there-color wheel unchanged 08:08:36 Received message from Master: op=Shutter serial=5303 08:08:36 Shutter LASER close 08:08:36 Received message from Camera: op=State serial=5305 08:08:36 GetSingleValue result=40 Value=cccccccc 08:08:36 SkyScan query 08:08:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:08:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:36 Parameters OK 08:08:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:36 Set A/D data flow result=40 08:08:36 Set A/D channel type result=40 08:08:36 Set A/D encoding result=40 08:08:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:36 Set channel filter=0.000000e+000 result=40 08:08:36 Config A/D Result=40 08:08:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:36 Get A/D filter: -9.255963e+061 result=40 08:08:36 Get A/D value=-858993460 result=40 08:08:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:08:36 Parameters OK 08:08:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:08:36 Set A/D data flow result=40 08:08:36 Set A/D channel type result=40 08:08:36 Set A/D encoding result=40 08:08:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:08:36 Set channel filter=0.000000e+000 result=40 08:08:36 Config A/D Result=40 08:08:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:08:36 Get A/D filter: -9.255963e+061 result=40 08:08:36 Get A/D value=-858993460 result=40 08:08:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:08:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:08:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:08:36 Aux= 08:08:36 Message to Camera, serial 5305 queued 08:09:07 Received message from Master: op=PointingHead serial=5312 08:09:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:09:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:09:08 Point started: ret=0 08:09:08 point_skyscan result=0 08:09:08 Check angles 08:09:08 SkyScan query 08:09:09 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.105<-23407 Statuses=0009 0009 08:09:09 Msec=0 True Az=113.025 Ze=-171.105 Az status=0009 Ze status=0009 08:09:09 Check angles 08:09:09 SkyScan query 08:09:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:09:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:09:10 Message to Master queued w/err=0: serial=5312 error=0 08:09:15 Received message from Master: op=Filter serial=5313 08:09:15 Color wheel filter change from 0 to 0 08:09:15 FLIGetFilterPos err=0 currentPosition=0 08:09:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:15 Filter is already there-color wheel unchanged 08:09:15 Received message from Master: op=Shutter serial=5314 08:09:15 Shutter LASER open 08:09:15 Received message from Camera: op=State serial=5316 08:09:15 GetSingleValue result=40 Value=cccccccc 08:09:15 SkyScan query 08:09:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:09:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:16 Parameters OK 08:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:16 Set A/D data flow result=40 08:09:16 Set A/D channel type result=40 08:09:16 Set A/D encoding result=40 08:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:16 Set channel filter=0.000000e+000 result=40 08:09:16 Config A/D Result=40 08:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:16 Get A/D filter: -9.255963e+061 result=40 08:09:16 Get A/D value=-858993460 result=40 08:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:16 Parameters OK 08:09:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:16 Set A/D data flow result=40 08:09:16 Set A/D channel type result=40 08:09:16 Set A/D encoding result=40 08:09:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:16 Set channel filter=0.000000e+000 result=40 08:09:16 Config A/D Result=40 08:09:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:16 Get A/D filter: -9.255963e+061 result=40 08:09:16 Get A/D value=-858993460 result=40 08:09:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:16 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:16 Aux= 08:09:16 Message to Camera, serial 5316 queued 08:09:18 Received message from Master: op=Shutter serial=5320 08:09:18 Shutter LASER close 08:09:19 Received message from Master: op=PointingHead serial=5324 08:09:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:09:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:09:19 Point started: ret=0 08:09:19 point_skyscan result=0 08:09:20 Check angles 08:09:20 SkyScan query 08:09:20 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.89<-21526 Statuses=0009 0009 08:09:20 Msec=0 True Az=136.185 Ze=-142.89 Az status=0009 Ze status=0009 08:09:21 Check angles [UTC 2018-12-4 08:09:21] 08:09:21 SkyScan query 08:09:21 SkyScan query done: ret=0 az=155.13<-10342 ze=-120.21<-20014 Statuses=0009 0009 08:09:21 Msec=750 True Az=155.13 Ze=-120.21 Az status=0009 Ze status=0009 08:09:21 Check angles 08:09:21 SkyScan query 08:09:22 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.59<-18706 Statuses=0009 0009 08:09:22 Msec=1500 True Az=171.495 Ze=-100.59 Az status=0009 Ze status=0009 08:09:22 Check angles 08:09:22 SkyScan query 08:09:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 08:09:23 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 08:09:23 Check angles 08:09:23 SkyScan query 08:09:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 08:09:23 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 08:09:24 Check angles 08:09:24 SkyScan query 08:09:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:09:24 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:09:24 Message to Master queued w/err=0: serial=5324 error=0 08:09:29 Received message from Master: op=Filter serial=5325 08:09:29 Color wheel filter change from 0 to 0 08:09:29 FLIGetFilterPos err=0 currentPosition=0 08:09:29 FLIGetStepsRemaining err=0 RemainingSteps=0 08:09:29 Filter is already there-color wheel unchanged 08:09:29 Received message from Master: op=Shutter serial=5326 08:09:29 Shutter LASER close 08:09:29 Received message from Camera: op=State serial=5328 08:09:29 GetSingleValue result=40 Value=cccccccc 08:09:29 SkyScan query 08:09:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:09:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:30 Parameters OK 08:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:30 Set A/D data flow result=40 08:09:30 Set A/D channel type result=40 08:09:30 Set A/D encoding result=40 08:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:30 Set channel filter=0.000000e+000 result=40 08:09:30 Config A/D Result=40 08:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:30 Get A/D filter: -9.255963e+061 result=40 08:09:30 Get A/D value=-858993460 result=40 08:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:09:30 Parameters OK 08:09:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:09:30 Set A/D data flow result=40 08:09:30 Set A/D channel type result=40 08:09:30 Set A/D encoding result=40 08:09:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:09:30 Set channel filter=0.000000e+000 result=40 08:09:30 Config A/D Result=40 08:09:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:09:30 Get A/D filter: -9.255963e+061 result=40 08:09:30 Get A/D value=-858993460 result=40 08:09:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:09:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:09:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:09:30 Aux= 08:09:30 Message to Camera, serial 5328 queued 08:10:01 Received message from Master: op=PointingHead serial=5335 08:10:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:10:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:10:01 Point started: ret=0 08:10:01 point_skyscan result=0 08:10:02 Check angles 08:10:02 SkyScan query 08:10:03 SkyScan query done: ret=0 az=153<-10200 ze=-21.72<-13448 Statuses=0009 0009 08:10:03 Msec=0 True Az=153 Ze=-21.72 Az status=0009 Ze status=0009 08:10:03 Check angles 08:10:03 SkyScan query 08:10:03 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.75<-12050 Statuses=0009 0009 08:10:03 Msec=750 True Az=135.465 Ze=-0.75 Az status=0009 Ze status=0009 08:10:03 Check angles 08:10:03 SkyScan query 08:10:04 SkyScan query done: ret=0 az=117.87<-7858 ze=20.205<-10653 Statuses=0009 0009 08:10:04 Msec=1500 True Az=117.87 Ze=20.205 Az status=0009 Ze status=0009 08:10:04 Check angles 08:10:04 SkyScan query 08:10:05 SkyScan query done: ret=0 az=100.47<-6698 ze=41.16<-9256 Statuses=0009 0009 08:10:05 Msec=2250 True Az=100.47 Ze=41.16 Az status=0009 Ze status=0009 08:10:05 Check angles 08:10:05 SkyScan query 08:10:06 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 08:10:06 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 08:10:06 Check angles 08:10:06 SkyScan query 08:10:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:10:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:10:06 Message to Master queued w/err=0: serial=5335 error=0 08:10:11 Received message from Master: op=Filter serial=5336 08:10:11 Color wheel filter change from 0 to 0 08:10:11 FLIGetFilterPos err=0 currentPosition=0 08:10:11 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:11 Filter is already there-color wheel unchanged 08:10:11 Received message from Master: op=Shutter serial=5337 08:10:11 Shutter LASER close 08:10:12 Received message from Camera: op=State serial=5339 08:10:12 GetSingleValue result=40 Value=cccccccc 08:10:12 SkyScan query 08:10:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:10:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:12 Parameters OK 08:10:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:12 Set A/D data flow result=40 08:10:12 Set A/D channel type result=40 08:10:12 Set A/D encoding result=40 08:10:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:12 Set channel filter=0.000000e+000 result=40 08:10:12 Config A/D Result=40 08:10:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:12 Get A/D filter: -9.255963e+061 result=40 08:10:12 Get A/D value=-858993460 result=40 08:10:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:12 Parameters OK 08:10:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:12 Set A/D data flow result=40 08:10:12 Set A/D channel type result=40 08:10:12 Set A/D encoding result=40 08:10:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:12 Set channel filter=0.000000e+000 result=40 08:10:12 Config A/D Result=40 08:10:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:12 Get A/D filter: -9.255963e+061 result=40 08:10:12 Get A/D value=-858993460 result=40 08:10:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:12 Aux= 08:10:12 Message to Camera, serial 5339 queued 08:10:43 Received message from Master: op=PointingHead serial=5346 08:10:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:10:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:10:43 Point started: ret=0 08:10:43 point_skyscan result=0 08:10:44 Check angles 08:10:44 SkyScan query 08:10:45 SkyScan query done: ret=0 az=108.945<-7263 ze=38.49<-9434 Statuses=0009 0008 08:10:45 Msec=0 True Az=108.945 Ze=38.49 Az status=0009 Ze status=0008 08:10:45 Check angles 08:10:45 SkyScan query 08:10:45 SkyScan query done: ret=0 az=126.39<-8426 ze=38.49<-9434 Statuses=0009 0008 08:10:45 Msec=750 True Az=126.39 Ze=38.49 Az status=0009 Ze status=0008 08:10:46 Check angles 08:10:46 SkyScan query 08:10:46 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 08:10:46 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 08:10:46 Check angles 08:10:46 SkyScan query 08:10:47 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 08:10:47 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 08:10:47 Check angles 08:10:47 SkyScan query 08:10:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:10:48 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:10:48 Check angles 08:10:48 SkyScan query 08:10:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:10:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:10:48 Message to Master queued w/err=0: serial=5346 error=0 08:10:53 Received message from Master: op=Filter serial=5347 08:10:53 Color wheel filter change from 0 to 0 08:10:53 FLIGetFilterPos err=0 currentPosition=0 08:10:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:10:53 Filter is already there-color wheel unchanged 08:10:54 Received message from Master: op=Shutter serial=5348 08:10:54 Shutter LASER close 08:10:54 Received message from Camera: op=State serial=5350 08:10:54 GetSingleValue result=40 Value=cccccccc 08:10:54 SkyScan query 08:10:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:10:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:54 Parameters OK 08:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:54 Set A/D data flow result=40 08:10:54 Set A/D channel type result=40 08:10:54 Set A/D encoding result=40 08:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:54 Set channel filter=0.000000e+000 result=40 08:10:54 Config A/D Result=40 08:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:54 Get A/D filter: -9.255963e+061 result=40 08:10:54 Get A/D value=-858993460 result=40 08:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:10:54 Parameters OK 08:10:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:10:54 Set A/D data flow result=40 08:10:54 Set A/D channel type result=40 08:10:54 Set A/D encoding result=40 08:10:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:10:54 Set channel filter=0.000000e+000 result=40 08:10:54 Config A/D Result=40 08:10:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:10:54 Get A/D filter: -9.255963e+061 result=40 08:10:54 Get A/D value=-858993460 result=40 08:10:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:10:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:10:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:10:54 Aux= 08:10:54 Message to Camera, serial 5350 queued 08:11:25 Received message from Master: op=PointingHead serial=5357 08:11:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:11:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:11:25 Point started: ret=0 08:11:25 point_skyscan result=0 08:11:26 Check angles 08:11:26 SkyScan query 08:11:27 SkyScan query done: ret=0 az=152.61<-10174 ze=8.22<-11452 Statuses=0009 0009 08:11:27 Msec=0 True Az=152.61 Ze=8.22 Az status=0009 Ze status=0009 08:11:27 Check angles 08:11:27 SkyScan query 08:11:27 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.72<-12848 Statuses=0009 0009 08:11:27 Msec=750 True Az=135.18 Ze=-12.72 Az status=0009 Ze status=0009 08:11:28 Check angles 08:11:28 SkyScan query 08:11:28 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.645<-14243 Statuses=0009 0009 08:11:28 Msec=1500 True Az=117.615 Ze=-33.645 Az status=0009 Ze status=0009 08:11:28 Check angles 08:11:28 SkyScan query 08:11:29 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.54<-15436 Statuses=0009 0009 08:11:29 Msec=2250 True Az=100.245 Ze=-51.54 Az status=0009 Ze status=0009 08:11:29 Check angles 08:11:29 SkyScan query 08:11:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:11:30 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:11:30 Check angles 08:11:30 SkyScan query 08:11:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:11:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:11:30 Message to Master queued w/err=0: serial=5357 error=0 08:11:35 Received message from Master: op=Filter serial=5358 08:11:35 Color wheel filter change from 0 to 0 08:11:35 FLIGetFilterPos err=0 currentPosition=0 08:11:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:11:35 Filter is already there-color wheel unchanged 08:11:36 Received message from Master: op=Shutter serial=5359 08:11:36 Shutter LASER close 08:11:36 Received message from Camera: op=State serial=5361 08:11:36 GetSingleValue result=40 Value=cccccccc 08:11:36 SkyScan query 08:11:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:11:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:36 Parameters OK 08:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:36 Set A/D data flow result=40 08:11:36 Set A/D channel type result=40 08:11:36 Set A/D encoding result=40 08:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:36 Set channel filter=0.000000e+000 result=40 08:11:36 Config A/D Result=40 08:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:36 Get A/D filter: -9.255963e+061 result=40 08:11:36 Get A/D value=-858993460 result=40 08:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:11:36 Parameters OK 08:11:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:11:36 Set A/D data flow result=40 08:11:36 Set A/D channel type result=40 08:11:36 Set A/D encoding result=40 08:11:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:11:36 Set channel filter=0.000000e+000 result=40 08:11:36 Config A/D Result=40 08:11:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:11:36 Get A/D filter: -9.255963e+061 result=40 08:11:36 Get A/D value=-858993460 result=40 08:11:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:11:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:11:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:11:36 Aux= 08:11:36 Message to Camera, serial 5361 queued 08:12:07 Received message from Master: op=PointingHead serial=5368 08:12:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:12:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:12:07 Point started: ret=0 08:12:07 point_skyscan result=0 08:12:08 Check angles 08:12:08 SkyScan query 08:12:09 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.09<-17406 Statuses=0009 0009 08:12:09 Msec=0 True Az=108.84 Ze=-81.09 Az status=0009 Ze status=0009 [UTC 2018-12-4 08:12:09] 08:12:09 Check angles 08:12:09 SkyScan query 08:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 08:12:10 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 08:12:10 Check angles 08:12:10 SkyScan query 08:12:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 08:12:10 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 08:12:11 Check angles 08:12:11 SkyScan query 08:12:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 08:12:11 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 08:12:11 Check angles 08:12:11 SkyScan query 08:12:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 08:12:12 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 08:12:12 Check angles 08:12:12 SkyScan query 08:12:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 08:12:13 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 08:12:13 Message to Master queued w/err=0: serial=5368 error=0 08:12:18 Received message from Master: op=Filter serial=5369 08:12:18 Color wheel filter change from 0 to 0 08:12:18 FLIGetFilterPos err=0 currentPosition=0 08:12:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:18 Filter is already there-color wheel unchanged 08:12:18 Received message from Master: op=Shutter serial=5370 08:12:18 Shutter LASER open 08:12:18 Received message from Camera: op=State serial=5372 08:12:18 GetSingleValue result=40 Value=cccccccc 08:12:18 SkyScan query 08:12:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:12:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:19 Parameters OK 08:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:19 Set A/D data flow result=40 08:12:19 Set A/D channel type result=40 08:12:19 Set A/D encoding result=40 08:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:19 Set channel filter=0.000000e+000 result=40 08:12:19 Config A/D Result=40 08:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:19 Get A/D filter: -9.255963e+061 result=40 08:12:19 Get A/D value=-858993460 result=40 08:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:19 Parameters OK 08:12:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:19 Set A/D data flow result=40 08:12:19 Set A/D channel type result=40 08:12:19 Set A/D encoding result=40 08:12:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:19 Set channel filter=0.000000e+000 result=40 08:12:19 Config A/D Result=40 08:12:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:19 Get A/D filter: -9.255963e+061 result=40 08:12:19 Get A/D value=-858993460 result=40 08:12:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:19 Aux= 08:12:19 Message to Camera, serial 5372 queued 08:12:21 Received message from Master: op=Shutter serial=5376 08:12:21 Shutter LASER close 08:12:21 Received message from Master: op=PointingHead serial=5380 08:12:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:12:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:12:22 Point started: ret=0 08:12:22 point_skyscan result=0 08:12:23 Check angles 08:12:23 SkyScan query 08:12:23 SkyScan query done: ret=0 az=89.64<-5976 ze=156.99<-1534 Statuses=0009 0009 08:12:23 Msec=0 True Az=89.64 Ze=156.99 Az status=0009 Ze status=0009 08:12:23 Check angles 08:12:23 SkyScan query 08:12:24 SkyScan query done: ret=0 az=72.15<-4810 ze=136.005<-2933 Statuses=0009 0009 08:12:24 Msec=750 True Az=72.15 Ze=136.005 Az status=0009 Ze status=0009 08:12:24 Check angles 08:12:24 SkyScan query 08:12:25 SkyScan query done: ret=0 az=54.78<-3652 ze=115.065<-4329 Statuses=0009 0009 08:12:25 Msec=1500 True Az=54.78 Ze=115.065 Az status=0009 Ze status=0009 08:12:25 Check angles 08:12:25 SkyScan query 08:12:25 SkyScan query done: ret=0 az=40.905<-2727 ze=93.645<-5757 Statuses=0009 0009 08:12:25 Msec=2250 True Az=40.905 Ze=93.645 Az status=0009 Ze status=0009 08:12:26 Check angles 08:12:26 SkyScan query 08:12:26 SkyScan query done: ret=0 az=40.995<-2733 ze=72.24<-7184 Statuses=0008 0009 08:12:26 Msec=3000 True Az=40.995 Ze=72.24 Az status=0008 Ze status=0009 08:12:26 Check angles 08:12:26 SkyScan query 08:12:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 08:12:27 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 08:12:27 Check angles 08:12:27 SkyScan query 08:12:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:12:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:12:28 Message to Master queued w/err=0: serial=5380 error=0 08:12:33 Received message from Master: op=Filter serial=5381 08:12:33 Color wheel filter change from 0 to 0 08:12:33 FLIGetFilterPos err=0 currentPosition=0 08:12:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:12:33 Filter is already there-color wheel unchanged 08:12:33 Received message from Master: op=Shutter serial=5382 08:12:33 Shutter LASER close 08:12:33 Received message from Camera: op=State serial=5384 08:12:33 GetSingleValue result=40 Value=cccccccc 08:12:33 SkyScan query 08:12:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:12:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:34 Parameters OK 08:12:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:34 Set A/D data flow result=40 08:12:34 Set A/D channel type result=40 08:12:34 Set A/D encoding result=40 08:12:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:34 Set channel filter=0.000000e+000 result=40 08:12:34 Config A/D Result=40 08:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:34 Get A/D filter: -9.255963e+061 result=40 08:12:34 Get A/D value=-858993460 result=40 08:12:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:12:34 Parameters OK 08:12:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:12:34 Set A/D data flow result=40 08:12:34 Set A/D channel type result=40 08:12:34 Set A/D encoding result=40 08:12:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:12:34 Set channel filter=0.000000e+000 result=40 08:12:34 Config A/D Result=40 08:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:12:34 Get A/D filter: -9.255963e+061 result=40 08:12:34 Get A/D value=-858993460 result=40 08:12:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:12:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:12:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:12:34 Aux= 08:12:34 Message to Camera, serial 5384 queued 08:13:05 Received message from Master: op=PointingHead serial=5391 08:13:05 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:13:05 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:13:05 Point started: ret=0 08:13:05 point_skyscan result=0 08:13:06 Check angles 08:13:06 SkyScan query 08:13:06 SkyScan query done: ret=0 az=64.215<-4281 ze=66.54<-7564 Statuses=0009 0008 08:13:06 Msec=0 True Az=64.215 Ze=66.54 Az status=0009 Ze status=0008 08:13:06 Check angles 08:13:06 SkyScan query 08:13:07 SkyScan query done: ret=0 az=81.975<-5465 ze=66.495<-7567 Statuses=0009 0008 08:13:07 Msec=750 True Az=81.975 Ze=66.495 Az status=0009 Ze status=0008 08:13:07 Check angles 08:13:07 SkyScan query 08:13:08 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 08:13:08 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 08:13:08 Check angles 08:13:08 SkyScan query 08:13:08 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 08:13:08 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 08:13:09 Check angles 08:13:09 SkyScan query 08:13:09 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 08:13:09 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 08:13:09 Check angles 08:13:09 SkyScan query 08:13:10 SkyScan query done: ret=0 az=152.295<-10153 ze=66.495<-7567 Statuses=0009 0008 08:13:10 Msec=3750 True Az=152.295 Ze=66.495 Az status=0009 Ze status=0008 08:13:10 Check angles 08:13:10 SkyScan query 08:13:11 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:13:11 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:13:11 Message to Master queued w/err=0: serial=5391 error=0 08:13:16 Received message from Master: op=Filter serial=5392 08:13:16 Color wheel filter change from 0 to 0 08:13:16 FLIGetFilterPos err=0 currentPosition=0 08:13:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:16 Filter is already there-color wheel unchanged 08:13:16 Received message from Master: op=Shutter serial=5393 08:13:16 Shutter LASER close 08:13:16 Received message from Camera: op=State serial=5395 08:13:16 GetSingleValue result=40 Value=cccccccc 08:13:16 SkyScan query 08:13:17 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:13:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:17 Parameters OK 08:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:17 Set A/D data flow result=40 08:13:17 Set A/D channel type result=40 08:13:17 Set A/D encoding result=40 08:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:17 Set channel filter=0.000000e+000 result=40 08:13:17 Config A/D Result=40 08:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:17 Get A/D filter: -9.255963e+061 result=40 08:13:17 Get A/D value=-858993460 result=40 08:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:17 Parameters OK 08:13:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:17 Set A/D data flow result=40 08:13:17 Set A/D channel type result=40 08:13:17 Set A/D encoding result=40 08:13:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:17 Set channel filter=0.000000e+000 result=40 08:13:17 Config A/D Result=40 08:13:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:17 Get A/D filter: -9.255963e+061 result=40 08:13:17 Get A/D value=-858993460 result=40 08:13:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:17 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:17 Aux= 08:13:17 Message to Camera, serial 5395 queued 08:13:47 Received message from Master: op=PointingHead serial=5402 08:13:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:13:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:13:48 Point started: ret=0 08:13:48 point_skyscan result=0 08:13:48 Check angles 08:13:48 SkyScan query 08:13:49 SkyScan query done: ret=0 az=134.58<-8972 ze=36.21<-9586 Statuses=0009 0009 08:13:49 Msec=0 True Az=134.58 Ze=36.21 Az status=0009 Ze status=0009 08:13:49 Check angles 08:13:49 SkyScan query 08:13:50 SkyScan query done: ret=0 az=117.09<-7806 ze=15.27<-10982 Statuses=0009 0009 08:13:50 Msec=750 True Az=117.09 Ze=15.27 Az status=0009 Ze status=0009 08:13:50 Check angles 08:13:50 SkyScan query 08:13:51 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.7<-12380 Statuses=0009 0009 08:13:51 Msec=1500 True Az=99.705 Ze=-5.7 Az status=0009 Ze status=0009 08:13:51 Check angles 08:13:51 SkyScan query 08:13:51 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.67<-13778 Statuses=0009 0009 08:13:51 Msec=2250 True Az=82.245 Ze=-26.67 Az status=0009 Ze status=0009 08:13:51 Check angles 08:13:51 SkyScan query 08:13:52 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 08:13:52 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 08:13:52 Check angles 08:13:52 SkyScan query 08:13:53 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.535<-14569 Statuses=0009 0008 08:13:53 Msec=3750 True Az=47.265 Ze=-38.535 Az status=0009 Ze status=0008 08:13:53 Check angles 08:13:53 SkyScan query 08:13:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:13:54 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:13:54 Message to Master queued w/err=0: serial=5402 error=0 08:13:59 Received message from Master: op=Filter serial=5403 08:13:59 Color wheel filter change from 0 to 0 08:13:59 FLIGetFilterPos err=0 currentPosition=0 08:13:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:13:59 Filter is already there-color wheel unchanged 08:13:59 Received message from Master: op=Shutter serial=5404 08:13:59 Shutter LASER close 08:13:59 Received message from Camera: op=State serial=5406 08:13:59 GetSingleValue result=40 Value=cccccccc 08:13:59 SkyScan query 08:13:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:13:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:59 Parameters OK 08:13:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:59 Set A/D data flow result=40 08:13:59 Set A/D channel type result=40 08:13:59 Set A/D encoding result=40 08:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:59 Set channel filter=0.000000e+000 result=40 08:13:59 Config A/D Result=40 08:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:59 Get A/D filter: -9.255963e+061 result=40 08:13:59 Get A/D value=-858993460 result=40 08:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:13:59 Parameters OK 08:13:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:13:59 Set A/D data flow result=40 08:13:59 Set A/D channel type result=40 08:13:59 Set A/D encoding result=40 08:13:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:13:59 Set channel filter=0.000000e+000 result=40 08:13:59 Config A/D Result=40 08:13:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:13:59 Get A/D filter: -9.255963e+061 result=40 08:13:59 Get A/D value=-858993460 result=40 08:13:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:13:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:13:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:13:59 Aux= 08:13:59 Message to Camera, serial 5406 queued 08:14:30 Received message from Master: op=PointingHead serial=5413 08:14:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:14:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:14:31 Point started: ret=0 08:14:31 point_skyscan result=0 08:14:31 Check angles 08:14:31 SkyScan query 08:14:32 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.76<-16584 Statuses=0009 0009 08:14:32 Msec=0 True Az=64.38 Ze=-68.76 Az status=0009 Ze status=0009 08:14:32 Check angles 08:14:32 SkyScan query 08:14:33 SkyScan query done: ret=0 az=82.425<-5495 ze=-90.15<-18010 Statuses=0009 0009 08:14:33 Msec=750 True Az=82.425 Ze=-90.15 Az status=0009 Ze status=0009 08:14:33 Check angles 08:14:33 SkyScan query 08:14:33 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.105<-19407 Statuses=0009 0009 08:14:33 Msec=1500 True Az=99.735 Ze=-111.105 Az status=0009 Ze status=0009 08:14:34 Check angles 08:14:34 SkyScan query 08:14:34 SkyScan query done: ret=0 az=117.24<-7816 ze=-132.075<-20805 Statuses=0009 0009 08:14:34 Msec=2250 True Az=117.24 Ze=-132.075 Az status=0009 Ze status=0009 08:14:34 Check angles 08:14:34 SkyScan query 08:14:35 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 08:14:35 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 08:14:35 Check angles 08:14:35 SkyScan query 08:14:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:14:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:14:36 Message to Master queued w/err=0: serial=5413 error=0 08:14:41 Received message from Master: op=Filter serial=5414 08:14:41 Color wheel filter change from 0 to 0 08:14:41 FLIGetFilterPos err=0 currentPosition=0 08:14:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:14:41 Filter is already there-color wheel unchanged 08:14:41 Received message from Master: op=Shutter serial=5415 08:14:41 Shutter LASER close 08:14:41 Received message from Camera: op=State serial=5417 08:14:41 GetSingleValue result=40 Value=cccccccc 08:14:41 SkyScan query 08:14:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:14:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:41 Parameters OK 08:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:41 Set A/D data flow result=40 08:14:41 Set A/D channel type result=40 08:14:41 Set A/D encoding result=40 08:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:41 Set channel filter=0.000000e+000 result=40 08:14:41 Config A/D Result=40 08:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:41 Get A/D filter: -9.255963e+061 result=40 08:14:41 Get A/D value=-858993460 result=40 08:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:14:41 Parameters OK 08:14:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:14:41 Set A/D data flow result=40 08:14:41 Set A/D channel type result=40 08:14:41 Set A/D encoding result=40 08:14:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:14:41 Set channel filter=0.000000e+000 result=40 08:14:41 Config A/D Result=40 08:14:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:14:41 Get A/D filter: -9.255963e+061 result=40 08:14:41 Get A/D value=-858993460 result=40 08:14:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:14:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:14:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:14:41 Aux= 08:14:41 Message to Camera, serial 5417 queued 08:15:12 Received message from Master: op=PointingHead serial=5424 08:15:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:15:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:15:13 Point started: ret=0 08:15:13 point_skyscan result=0 08:15:13 Check angles 08:15:13 SkyScan query 08:15:14 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.09<-23406 Statuses=0009 0009 08:15:14 Msec=0 True Az=113.025 Ze=-171.09 Az status=0009 Ze status=0009 08:15:14 Check angles 08:15:14 SkyScan query 08:15:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:15:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:15:15 Message to Master queued w/err=0: serial=5424 error=0 08:15:20 Received message from Master: op=Filter serial=5425 08:15:20 Color wheel filter change from 0 to 0 08:15:20 FLIGetFilterPos err=0 currentPosition=0 08:15:20 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:20 Filter is already there-color wheel unchanged 08:15:20 Received message from Master: op=Shutter serial=5426 08:15:20 Shutter LASER open 08:15:20 Received message from Camera: op=State serial=5428 08:15:20 GetSingleValue result=40 Value=cccccccc 08:15:20 SkyScan query 08:15:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:15:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:21 Parameters OK 08:15:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:21 Set A/D data flow result=40 08:15:21 Set A/D channel type result=40 08:15:21 Set A/D encoding result=40 08:15:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:21 Set channel filter=0.000000e+000 result=40 08:15:21 Config A/D Result=40 08:15:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:21 Get A/D filter: -9.255963e+061 result=40 08:15:21 Get A/D value=-858993460 result=40 08:15:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:21 Parameters OK 08:15:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:21 Set A/D data flow result=40 08:15:21 Set A/D channel type result=40 08:15:21 Set A/D encoding result=40 08:15:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:21 Set channel filter=0.000000e+000 result=40 08:15:21 Config A/D Result=40 08:15:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:21 Get A/D filter: -9.255963e+061 result=40 08:15:21 Get A/D value=-858993460 result=40 08:15:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:21 Aux= 08:15:21 Message to Camera, serial 5428 queued 08:15:23 Received message from Master: op=Shutter serial=5432 08:15:23 Shutter LASER close 08:15:24 Received message from Master: op=PointingHead serial=5436 08:15:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:15:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:15:24 Point started: ret=0 08:15:24 point_skyscan result=0 08:15:25 Check angles 08:15:25 SkyScan query 08:15:25 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.98<-21532 Statuses=0009 0009 08:15:25 Msec=0 True Az=136.155 Ze=-142.98 Az status=0009 Ze status=0009 08:15:26 Check angles 08:15:26 SkyScan query 08:15:26 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.605<-20107 Statuses=0009 0009 08:15:26 Msec=750 True Az=154.035 Ze=-121.605 Az status=0009 Ze status=0009 08:15:26 Check angles 08:15:26 SkyScan query 08:15:27 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.635<-18709 Statuses=0009 0009 08:15:27 Msec=1500 True Az=171.495 Ze=-100.635 Az status=0009 Ze status=0009 08:15:27 Check angles 08:15:27 SkyScan query 08:15:28 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.71<-17314 Statuses=0008 0009 08:15:28 Msec=2250 True Az=176.025 Ze=-79.71 Az status=0008 Ze status=0009 08:15:28 Check angles 08:15:28 SkyScan query 08:15:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.275<-15885 Statuses=0008 0009 08:15:28 Msec=3000 True Az=175.995 Ze=-58.275 Az status=0008 Ze status=0009 08:15:29 Check angles 08:15:29 SkyScan query 08:15:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:15:29 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:15:29 Message to Master queued w/err=0: serial=5436 error=0 08:15:34 Received message from Master: op=Filter serial=5437 08:15:34 Color wheel filter change from 0 to 0 08:15:34 FLIGetFilterPos err=0 currentPosition=0 08:15:34 FLIGetStepsRemaining err=0 RemainingSteps=0 08:15:34 Filter is already there-color wheel unchanged 08:15:34 Received message from Master: op=Shutter serial=5438 08:15:34 Shutter LASER close 08:15:35 Received message from Camera: op=State serial=5440 08:15:35 GetSingleValue result=40 Value=cccccccc 08:15:35 SkyScan query 08:15:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:15:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:35 Parameters OK 08:15:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:35 Set A/D data flow result=40 08:15:35 Set A/D channel type result=40 08:15:35 Set A/D encoding result=40 08:15:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:35 Set channel filter=0.000000e+000 result=40 08:15:35 Config A/D Result=40 08:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:35 Get A/D filter: -9.255963e+061 result=40 08:15:35 Get A/D value=-858993460 result=40 08:15:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:15:35 Parameters OK 08:15:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:15:35 Set A/D data flow result=40 08:15:35 Set A/D channel type result=40 08:15:35 Set A/D encoding result=40 08:15:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:15:35 Set channel filter=0.000000e+000 result=40 08:15:35 Config A/D Result=40 08:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:15:35 Get A/D filter: -9.255963e+061 result=40 08:15:35 Get A/D value=-858993460 result=40 08:15:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:15:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:15:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:15:35 Aux= 08:15:35 Message to Camera, serial 5440 queued 08:16:06 Received message from Master: op=PointingHead serial=5447 08:16:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:16:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:16:06 Point started: ret=0 08:16:06 point_skyscan result=0 08:16:07 Check angles 08:16:07 SkyScan query 08:16:08 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.96<-13464 Statuses=0009 0009 08:16:08 Msec=0 True Az=153.15 Ze=-21.96 Az status=0009 Ze status=0009 08:16:08 Check angles 08:16:08 SkyScan query 08:16:08 SkyScan query done: ret=0 az=135.705<-9047 ze=-0.93<-12062 Statuses=0009 0009 08:16:08 Msec=750 True Az=135.705 Ze=-0.93 Az status=0009 Ze status=0009 08:16:09 Check angles 08:16:09 SkyScan query 08:16:09 SkyScan query done: ret=0 az=118.215<-7881 ze=19.965<-10669 Statuses=0009 0009 08:16:09 Msec=1500 True Az=118.215 Ze=19.965 Az status=0009 Ze status=0009 08:16:09 Check angles 08:16:09 SkyScan query 08:16:10 SkyScan query done: ret=0 az=100.785<-6719 ze=40.905<-9273 Statuses=0009 0009 08:16:10 Msec=2250 True Az=100.785 Ze=40.905 Az status=0009 Ze status=0009 08:16:10 Check angles 08:16:10 SkyScan query 08:16:11 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 08:16:11 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 08:16:11 Check angles 08:16:11 SkyScan query 08:16:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:16:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:16:11 Message to Master queued w/err=0: serial=5447 error=0 08:16:16 Received message from Master: op=Filter serial=5448 08:16:16 Color wheel filter change from 0 to 0 08:16:16 FLIGetFilterPos err=0 currentPosition=0 08:16:16 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:16 Filter is already there-color wheel unchanged 08:16:17 Received message from Master: op=Shutter serial=5449 08:16:17 Shutter LASER close 08:16:17 Received message from Camera: op=State serial=5451 08:16:17 GetSingleValue result=40 Value=cccccccc 08:16:17 SkyScan query 08:16:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:16:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:17 Parameters OK 08:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:17 Set A/D data flow result=40 08:16:17 Set A/D channel type result=40 08:16:17 Set A/D encoding result=40 08:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:17 Set channel filter=0.000000e+000 result=40 08:16:17 Config A/D Result=40 08:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:17 Get A/D filter: -9.255963e+061 result=40 08:16:17 Get A/D value=-858993460 result=40 08:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:17 Parameters OK 08:16:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:17 Set A/D data flow result=40 08:16:17 Set A/D channel type result=40 08:16:17 Set A/D encoding result=40 08:16:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:17 Set channel filter=0.000000e+000 result=40 08:16:17 Config A/D Result=40 08:16:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:17 Get A/D filter: -9.255963e+061 result=40 08:16:17 Get A/D value=-858993460 result=40 08:16:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:17 Aux= 08:16:17 Message to Camera, serial 5451 queued 08:16:48 Received message from Master: op=PointingHead serial=5458 08:16:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:16:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:16:48 Point started: ret=0 08:16:48 point_skyscan result=0 08:16:49 Check angles 08:16:49 SkyScan query 08:16:50 SkyScan query done: ret=0 az=109.005<-7267 ze=38.49<-9434 Statuses=0009 0008 08:16:50 Msec=0 True Az=109.005 Ze=38.49 Az status=0009 Ze status=0008 08:16:50 Check angles 08:16:50 SkyScan query 08:16:50 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 08:16:50 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 08:16:51 Check angles 08:16:51 SkyScan query 08:16:51 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 08:16:51 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 08:16:51 Check angles 08:16:51 SkyScan query 08:16:52 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 08:16:52 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 08:16:52 Check angles 08:16:52 SkyScan query 08:16:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 08:16:53 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 08:16:53 Check angles 08:16:53 SkyScan query 08:16:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:16:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:16:53 Message to Master queued w/err=0: serial=5458 error=0 08:16:58 Received message from Master: op=Filter serial=5459 08:16:58 Color wheel filter change from 0 to 0 08:16:58 FLIGetFilterPos err=0 currentPosition=0 08:16:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:16:58 Filter is already there-color wheel unchanged 08:16:59 Received message from Master: op=Shutter serial=5460 08:16:59 Shutter LASER close 08:16:59 Received message from Camera: op=State serial=5462 08:16:59 GetSingleValue result=40 Value=cccccccc 08:16:59 SkyScan query 08:16:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:16:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:59 Parameters OK 08:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:59 Set A/D data flow result=40 08:16:59 Set A/D channel type result=40 08:16:59 Set A/D encoding result=40 08:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:59 Set channel filter=0.000000e+000 result=40 08:16:59 Config A/D Result=40 08:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:59 Get A/D filter: -9.255963e+061 result=40 08:16:59 Get A/D value=-858993460 result=40 08:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:16:59 Parameters OK 08:16:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:16:59 Set A/D data flow result=40 08:16:59 Set A/D channel type result=40 08:16:59 Set A/D encoding result=40 08:16:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:16:59 Set channel filter=0.000000e+000 result=40 08:16:59 Config A/D Result=40 08:16:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:16:59 Get A/D filter: -9.255963e+061 result=40 08:16:59 Get A/D value=-858993460 result=40 08:16:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:16:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:16:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:16:59 Aux= 08:16:59 Message to Camera, serial 5462 queued 08:17:30 Received message from Master: op=PointingHead serial=5469 08:17:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:17:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:17:31 Point started: ret=0 08:17:31 point_skyscan result=0 08:17:31 Check angles 08:17:31 SkyScan query 08:17:32 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 08:17:32 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 08:17:32 Check angles 08:17:32 SkyScan query 08:17:33 SkyScan query done: ret=0 az=135.06<-9004 ze=-13.05<-12870 Statuses=0009 0009 08:17:33 Msec=750 True Az=135.06 Ze=-13.05 Az status=0009 Ze status=0009 08:17:33 Check angles 08:17:33 SkyScan query 08:17:33 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.975<-14265 Statuses=0009 0009 08:17:33 Msec=1500 True Az=117.375 Ze=-33.975 Az status=0009 Ze status=0009 08:17:34 Check angles 08:17:34 SkyScan query 08:17:34 SkyScan query done: ret=0 az=99.585<-6639 ze=-51.555<-15437 Statuses=0009 0009 08:17:34 Msec=2250 True Az=99.585 Ze=-51.555 Az status=0009 Ze status=0009 08:17:34 Check angles 08:17:34 SkyScan query 08:17:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 08:17:35 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 08:17:35 Check angles 08:17:35 SkyScan query 08:17:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:17:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:17:36 Message to Master queued w/err=0: serial=5469 error=0 08:17:41 Received message from Master: op=Filter serial=5470 08:17:41 Color wheel filter change from 0 to 0 08:17:41 FLIGetFilterPos err=0 currentPosition=0 08:17:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:17:41 Filter is already there-color wheel unchanged 08:17:41 Received message from Master: op=Shutter serial=5471 08:17:41 Shutter LASER close 08:17:41 Received message from Camera: op=State serial=5473 08:17:41 GetSingleValue result=40 Value=cccccccc 08:17:41 SkyScan query 08:17:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:17:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:41 Parameters OK 08:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:41 Set A/D data flow result=40 08:17:41 Set A/D channel type result=40 08:17:41 Set A/D encoding result=40 08:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:41 Set channel filter=0.000000e+000 result=40 08:17:41 Config A/D Result=40 08:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:41 Get A/D filter: -9.255963e+061 result=40 08:17:41 Get A/D value=-858993460 result=40 08:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:17:41 Parameters OK 08:17:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:17:41 Set A/D data flow result=40 08:17:41 Set A/D channel type result=40 08:17:41 Set A/D encoding result=40 08:17:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:17:41 Set channel filter=0.000000e+000 result=40 08:17:41 Config A/D Result=40 08:17:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:17:41 Get A/D filter: -9.255963e+061 result=40 08:17:41 Get A/D value=-858993460 result=40 08:17:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:17:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:17:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:17:41 Aux= 08:17:41 Message to Camera, serial 5473 queued 08:18:12 Received message from Master: op=PointingHead serial=5480 08:18:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:18:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:18:13 Point started: ret=0 08:18:13 point_skyscan result=0 08:18:13 Check angles 08:18:13 SkyScan query 08:18:14 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.225<-17415 Statuses=0009 0009 08:18:14 Msec=0 True Az=108.915 Ze=-81.225 Az status=0009 Ze status=0009 08:18:14 Check angles 08:18:14 SkyScan query 08:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 08:18:15 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 08:18:15 Check angles 08:18:15 SkyScan query 08:18:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.165<-20211 Statuses=0008 0009 08:18:15 Msec=1500 True Az=112.995 Ze=-123.165 Az status=0008 Ze status=0009 08:18:16 Check angles 08:18:16 SkyScan query 08:18:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 08:18:16 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 08:18:16 Check angles 08:18:16 SkyScan query 08:18:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.495<-23033 Statuses=0008 0009 08:18:17 Msec=3000 True Az=112.995 Ze=-165.495 Az status=0008 Ze status=0009 08:18:17 Check angles 08:18:17 SkyScan query 08:18:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 08:18:18 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 08:18:18 Message to Master queued w/err=0: serial=5480 error=0 08:18:23 Received message from Master: op=Filter serial=5481 08:18:23 Color wheel filter change from 0 to 0 08:18:23 FLIGetFilterPos err=0 currentPosition=0 08:18:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:23 Filter is already there-color wheel unchanged 08:18:23 Received message from Master: op=Shutter serial=5482 08:18:23 Shutter LASER open 08:18:23 Received message from Camera: op=State serial=5484 08:18:23 GetSingleValue result=40 Value=cccccccc 08:18:23 SkyScan query 08:18:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:18:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:24 Parameters OK 08:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:24 Set A/D data flow result=40 08:18:24 Set A/D channel type result=40 08:18:24 Set A/D encoding result=40 08:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:24 Set channel filter=0.000000e+000 result=40 08:18:24 Config A/D Result=40 08:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:24 Get A/D filter: -9.255963e+061 result=40 08:18:24 Get A/D value=-858993460 result=40 08:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:24 Parameters OK 08:18:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:24 Set A/D data flow result=40 08:18:24 Set A/D channel type result=40 08:18:24 Set A/D encoding result=40 08:18:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:24 Set channel filter=0.000000e+000 result=40 08:18:24 Config A/D Result=40 08:18:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:24 Get A/D filter: -9.255963e+061 result=40 08:18:24 Get A/D value=-858993460 result=40 08:18:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:24 Aux= 08:18:24 Message to Camera, serial 5484 queued 08:18:26 Received message from Master: op=Shutter serial=5488 08:18:26 Shutter LASER close 08:18:27 Received message from Master: op=PointingHead serial=5492 08:18:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:18:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:18:27 Point started: ret=0 08:18:27 point_skyscan result=0 08:18:28 Check angles 08:18:28 SkyScan query 08:18:28 SkyScan query done: ret=0 az=90.165<-6011 ze=157.5<-1500 Statuses=0009 0009 08:18:28 Msec=0 True Az=90.165 Ze=157.5 Az status=0009 Ze status=0009 08:18:28 Check angles 08:18:28 SkyScan query 08:18:29 SkyScan query done: ret=0 az=72.78<-4852 ze=136.53<-2898 Statuses=0009 0009 08:18:29 Msec=750 True Az=72.78 Ze=136.53 Az status=0009 Ze status=0009 08:18:29 Check angles 08:18:29 SkyScan query 08:18:30 SkyScan query done: ret=0 az=55.125<-3675 ze=115.575<-4295 Statuses=0009 0009 08:18:30 Msec=1500 True Az=55.125 Ze=115.575 Az status=0009 Ze status=0009 08:18:30 Check angles 08:18:30 SkyScan query 08:18:30 SkyScan query done: ret=0 az=40.83<-2722 ze=94.62<-5692 Statuses=0009 0009 08:18:30 Msec=2250 True Az=40.83 Ze=94.62 Az status=0009 Ze status=0009 08:18:31 Check angles 08:18:31 SkyScan query 08:18:31 SkyScan query done: ret=0 az=40.995<-2733 ze=73.215<-7119 Statuses=0008 0009 08:18:31 Msec=3000 True Az=40.995 Ze=73.215 Az status=0008 Ze status=0009 08:18:31 Check angles 08:18:31 SkyScan query 08:18:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 08:18:32 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 08:18:32 Check angles 08:18:32 SkyScan query 08:18:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:18:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:18:33 Message to Master queued w/err=0: serial=5492 error=0 08:18:38 Received message from Master: op=Filter serial=5493 08:18:38 Color wheel filter change from 0 to 0 08:18:38 FLIGetFilterPos err=0 currentPosition=0 08:18:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:18:38 Filter is already there-color wheel unchanged 08:18:38 Received message from Master: op=Shutter serial=5494 08:18:38 Shutter LASER close 08:18:38 Received message from Camera: op=State serial=5496 08:18:38 GetSingleValue result=40 Value=cccccccc 08:18:38 SkyScan query 08:18:39 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:18:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:39 Parameters OK 08:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:39 Set A/D data flow result=40 08:18:39 Set A/D channel type result=40 08:18:39 Set A/D encoding result=40 08:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:39 Set channel filter=0.000000e+000 result=40 08:18:39 Config A/D Result=40 08:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:39 Get A/D filter: -9.255963e+061 result=40 08:18:39 Get A/D value=-858993460 result=40 08:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:18:39 Parameters OK 08:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:18:39 Set A/D data flow result=40 08:18:39 Set A/D channel type result=40 08:18:39 Set A/D encoding result=40 08:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:18:39 Set channel filter=0.000000e+000 result=40 08:18:39 Config A/D Result=40 08:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:18:39 Get A/D filter: -9.255963e+061 result=40 08:18:39 Get A/D value=-858993460 result=40 08:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:18:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:18:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:18:39 Aux= 08:18:39 Message to Camera, serial 5496 queued 08:19:09 Received message from Master: op=PointingHead serial=5503 08:19:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:19:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:19:10 Point started: ret=0 08:19:10 point_skyscan result=0 08:19:11 Check angles 08:19:11 SkyScan query 08:19:11 SkyScan query done: ret=0 az=63.975<-4265 ze=66.54<-7564 Statuses=0009 0008 08:19:11 Msec=0 True Az=63.975 Ze=66.54 Az status=0009 Ze status=0008 08:19:11 Check angles 08:19:11 SkyScan query 08:19:12 SkyScan query done: ret=0 az=81.525<-5435 ze=66.51<-7566 Statuses=0009 0008 08:19:12 Msec=750 True Az=81.525 Ze=66.51 Az status=0009 Ze status=0008 08:19:12 Check angles 08:19:12 SkyScan query 08:19:13 SkyScan query done: ret=0 az=99.165<-6611 ze=66.495<-7567 Statuses=0009 0008 08:19:13 Msec=1500 True Az=99.165 Ze=66.495 Az status=0009 Ze status=0008 08:19:13 Check angles 08:19:13 SkyScan query 08:19:13 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 08:19:13 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 08:19:14 Check angles 08:19:14 SkyScan query 08:19:14 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 08:19:14 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 08:19:14 Check angles 08:19:14 SkyScan query 08:19:15 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 08:19:15 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 08:19:15 Check angles 08:19:15 SkyScan query 08:19:16 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:19:16 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:19:16 Message to Master queued w/err=0: serial=5503 error=0 08:19:21 Received message from Master: op=Filter serial=5504 08:19:21 Color wheel filter change from 0 to 0 08:19:21 FLIGetFilterPos err=0 currentPosition=0 08:19:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:19:21 Filter is already there-color wheel unchanged 08:19:21 Received message from Master: op=Shutter serial=5505 08:19:21 Shutter LASER close 08:19:21 Received message from Camera: op=State serial=5507 08:19:21 GetSingleValue result=40 Value=cccccccc 08:19:21 SkyScan query 08:19:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:19:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:21 Parameters OK 08:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:21 Set A/D data flow result=40 08:19:21 Set A/D channel type result=40 08:19:21 Set A/D encoding result=40 08:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:21 Set channel filter=0.000000e+000 result=40 08:19:21 Config A/D Result=40 08:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:21 Get A/D filter: -9.255963e+061 result=40 08:19:21 Get A/D value=-858993460 result=40 08:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:19:21 Parameters OK 08:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:19:21 Set A/D data flow result=40 08:19:21 Set A/D channel type result=40 08:19:21 Set A/D encoding result=40 08:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:19:21 Set channel filter=0.000000e+000 result=40 08:19:21 Config A/D Result=40 08:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:19:21 Get A/D filter: -9.255963e+061 result=40 08:19:21 Get A/D value=-858993460 result=40 08:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:19:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:19:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:19:21 Aux= 08:19:21 Message to Camera, serial 5507 queued 08:19:52 Received message from Master: op=PointingHead serial=5514 08:19:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:19:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:19:53 Point started: ret=0 08:19:53 point_skyscan result=0 08:19:53 Check angles 08:19:53 SkyScan query 08:19:54 SkyScan query done: ret=0 az=135.105<-9007 ze=36.765<-9549 Statuses=0009 0009 08:19:54 Msec=0 True Az=135.105 Ze=36.765 Az status=0009 Ze status=0009 08:19:54 Check angles 08:19:54 SkyScan query 08:19:55 SkyScan query done: ret=0 az=117.105<-7807 ze=15.39<-10974 Statuses=0009 0009 08:19:55 Msec=750 True Az=117.105 Ze=15.39 Az status=0009 Ze status=0009 08:19:55 Check angles 08:19:55 SkyScan query 08:19:56 SkyScan query done: ret=0 az=99.48<-6632 ze=-6.03<-12402 Statuses=0009 0009 08:19:56 Msec=1500 True Az=99.48 Ze=-6.03 Az status=0009 Ze status=0009 08:19:56 Check angles 08:19:56 SkyScan query 08:19:56 SkyScan query done: ret=0 az=81.99<-5466 ze=-26.94<-13796 Statuses=0009 0009 08:19:56 Msec=2250 True Az=81.99 Ze=-26.94 Az status=0009 Ze status=0009 08:19:56 Check angles 08:19:56 SkyScan query 08:19:57 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.565<-14571 Statuses=0009 0008 08:19:57 Msec=3000 True Az=64.515 Ze=-38.565 Az status=0009 Ze status=0008 08:19:57 Check angles 08:19:57 SkyScan query 08:19:58 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 08:19:58 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 08:19:58 Check angles 08:19:58 SkyScan query 08:19:59 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 08:19:59 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 08:19:59 Message to Master queued w/err=0: serial=5514 error=0 08:20:04 Received message from Master: op=Filter serial=5515 08:20:04 Color wheel filter change from 0 to 0 08:20:04 FLIGetFilterPos err=0 currentPosition=0 08:20:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:04 Filter is already there-color wheel unchanged 08:20:04 Received message from Master: op=Shutter serial=5516 08:20:04 Shutter LASER close 08:20:04 Received message from Camera: op=State serial=5518 08:20:04 GetSingleValue result=40 Value=cccccccc 08:20:04 SkyScan query 08:20:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:20:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:04 Parameters OK 08:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:04 Set A/D data flow result=40 08:20:04 Set A/D channel type result=40 08:20:04 Set A/D encoding result=40 08:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:04 Set channel filter=0.000000e+000 result=40 08:20:04 Config A/D Result=40 08:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:04 Get A/D filter: -9.255963e+061 result=40 08:20:04 Get A/D value=-858993460 result=40 08:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:04 Parameters OK 08:20:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:04 Set A/D data flow result=40 08:20:04 Set A/D channel type result=40 08:20:04 Set A/D encoding result=40 08:20:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:04 Set channel filter=0.000000e+000 result=40 08:20:04 Config A/D Result=40 08:20:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:04 Get A/D filter: -9.255963e+061 result=40 08:20:04 Get A/D value=-858993460 result=40 08:20:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:04 Aux= 08:20:04 Message to Camera, serial 5518 queued [UTC 2018-12-4 08:20:35] 08:20:35 Received message from Master: op=PointingHead serial=5525 08:20:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:20:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:20:36 Point started: ret=0 08:20:36 point_skyscan result=0 08:20:36 Check angles 08:20:36 SkyScan query 08:20:37 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.04<-16536 Statuses=0009 0009 08:20:37 Msec=0 True Az=63.795 Ze=-68.04 Az status=0009 Ze status=0009 08:20:37 Check angles 08:20:37 SkyScan query 08:20:38 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.43<-17962 Statuses=0009 0009 08:20:38 Msec=750 True Az=81.645 Ze=-89.43 Az status=0009 Ze status=0009 08:20:38 Check angles 08:20:38 SkyScan query 08:20:38 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.805<-19387 Statuses=0009 0009 08:20:38 Msec=1500 True Az=99.54 Ze=-110.805 Az status=0009 Ze status=0009 08:20:39 Check angles 08:20:39 SkyScan query 08:20:39 SkyScan query done: ret=0 az=116.925<-7795 ze=-131.745<-20783 Statuses=0009 0009 08:20:39 Msec=2250 True Az=116.925 Ze=-131.745 Az status=0009 Ze status=0009 08:20:39 Check angles 08:20:39 SkyScan query 08:20:40 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 08:20:40 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 08:20:40 Check angles 08:20:40 SkyScan query 08:20:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:20:41 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:20:41 Message to Master queued w/err=0: serial=5525 error=0 08:20:46 Received message from Master: op=Filter serial=5526 08:20:46 Color wheel filter change from 0 to 0 08:20:46 FLIGetFilterPos err=0 currentPosition=0 08:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:20:46 Filter is already there-color wheel unchanged 08:20:46 Received message from Master: op=Shutter serial=5527 08:20:46 Shutter LASER close 08:20:46 Received message from Camera: op=State serial=5529 08:20:46 GetSingleValue result=40 Value=cccccccc 08:20:46 SkyScan query 08:20:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:20:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:46 Parameters OK 08:20:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:46 Set A/D data flow result=40 08:20:46 Set A/D channel type result=40 08:20:46 Set A/D encoding result=40 08:20:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:46 Set channel filter=0.000000e+000 result=40 08:20:46 Config A/D Result=40 08:20:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:46 Get A/D filter: -9.255963e+061 result=40 08:20:46 Get A/D value=-858993460 result=40 08:20:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:20:46 Parameters OK 08:20:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:20:46 Set A/D data flow result=40 08:20:46 Set A/D channel type result=40 08:20:46 Set A/D encoding result=40 08:20:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:20:46 Set channel filter=0.000000e+000 result=40 08:20:46 Config A/D Result=40 08:20:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:20:46 Get A/D filter: -9.255963e+061 result=40 08:20:46 Get A/D value=-858993460 result=40 08:20:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:20:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:20:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:20:46 Aux= 08:20:46 Message to Camera, serial 5529 queued 08:21:17 Received message from Master: op=PointingHead serial=5536 08:21:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:21:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:21:18 Point started: ret=0 08:21:18 point_skyscan result=0 08:21:18 Check angles 08:21:18 SkyScan query 08:21:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 08:21:19 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 08:21:19 Check angles 08:21:19 SkyScan query 08:21:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:21:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:21:20 Message to Master queued w/err=0: serial=5536 error=0 08:21:25 Received message from Master: op=Filter serial=5537 08:21:25 Color wheel filter change from 0 to 0 08:21:25 FLIGetFilterPos err=0 currentPosition=0 08:21:25 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:25 Filter is already there-color wheel unchanged 08:21:25 Received message from Master: op=Shutter serial=5538 08:21:25 Shutter LASER open 08:21:25 Received message from Camera: op=State serial=5540 08:21:25 GetSingleValue result=40 Value=cccccccc 08:21:25 SkyScan query 08:21:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:21:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:26 Parameters OK 08:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:26 Set A/D data flow result=40 08:21:26 Set A/D channel type result=40 08:21:26 Set A/D encoding result=40 08:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:26 Set channel filter=0.000000e+000 result=40 08:21:26 Config A/D Result=40 08:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:26 Get A/D filter: -9.255963e+061 result=40 08:21:26 Get A/D value=-858993460 result=40 08:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:26 Parameters OK 08:21:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:26 Set A/D data flow result=40 08:21:26 Set A/D channel type result=40 08:21:26 Set A/D encoding result=40 08:21:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:26 Set channel filter=0.000000e+000 result=40 08:21:26 Config A/D Result=40 08:21:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:26 Get A/D filter: -9.255963e+061 result=40 08:21:26 Get A/D value=-858993460 result=40 08:21:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:26 Aux= 08:21:26 Message to Camera, serial 5540 queued 08:21:28 Received message from Master: op=Shutter serial=5544 08:21:28 Shutter LASER close 08:21:29 Received message from Master: op=PointingHead serial=5548 08:21:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:21:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:21:29 Point started: ret=0 08:21:29 point_skyscan result=0 08:21:30 Check angles 08:21:30 SkyScan query 08:21:30 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.98<-21532 Statuses=0009 0009 08:21:30 Msec=0 True Az=136.155 Ze=-142.98 Az status=0009 Ze status=0009 08:21:31 Check angles 08:21:31 SkyScan query 08:21:31 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.025<-20135 Statuses=0009 0009 08:21:31 Msec=750 True Az=153.645 Ze=-122.025 Az status=0009 Ze status=0009 08:21:31 Check angles 08:21:31 SkyScan query 08:21:32 SkyScan query done: ret=0 az=171.195<-11413 ze=-101.085<-18739 Statuses=0009 0009 08:21:32 Msec=1500 True Az=171.195 Ze=-101.085 Az status=0009 Ze status=0009 08:21:32 Check angles 08:21:32 SkyScan query 08:21:33 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.13<-17342 Statuses=0008 0009 08:21:33 Msec=2250 True Az=176.025 Ze=-80.13 Az status=0008 Ze status=0009 08:21:33 Check angles 08:21:33 SkyScan query 08:21:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.16<-15944 Statuses=0008 0009 08:21:33 Msec=3000 True Az=175.995 Ze=-59.16 Az status=0008 Ze status=0009 08:21:34 Check angles 08:21:34 SkyScan query 08:21:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:21:34 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:21:34 Message to Master queued w/err=0: serial=5548 error=0 08:21:39 Received message from Master: op=Filter serial=5549 08:21:39 Color wheel filter change from 0 to 0 08:21:39 FLIGetFilterPos err=0 currentPosition=0 08:21:39 FLIGetStepsRemaining err=0 RemainingSteps=0 08:21:39 Filter is already there-color wheel unchanged 08:21:39 Received message from Master: op=Shutter serial=5550 08:21:39 Shutter LASER close 08:21:40 Received message from Camera: op=State serial=5552 08:21:40 GetSingleValue result=40 Value=cccccccc 08:21:40 SkyScan query 08:21:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:21:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:40 Parameters OK 08:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:40 Set A/D data flow result=40 08:21:40 Set A/D channel type result=40 08:21:40 Set A/D encoding result=40 08:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:40 Set channel filter=0.000000e+000 result=40 08:21:40 Config A/D Result=40 08:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:40 Get A/D filter: -9.255963e+061 result=40 08:21:40 Get A/D value=-858993460 result=40 08:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:21:40 Parameters OK 08:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:21:40 Set A/D data flow result=40 08:21:40 Set A/D channel type result=40 08:21:40 Set A/D encoding result=40 08:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:21:40 Set channel filter=0.000000e+000 result=40 08:21:40 Config A/D Result=40 08:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:21:40 Get A/D filter: -9.255963e+061 result=40 08:21:40 Get A/D value=-858993460 result=40 08:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:21:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:21:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:21:40 Aux= 08:21:40 Message to Camera, serial 5552 queued 08:21:49 Received message from Master: op=Identify serial=5553 08:22:11 Received message from Master: op=PointingHead serial=5562 08:22:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:22:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:22:11 Point started: ret=0 08:22:11 point_skyscan result=0 08:22:12 Check angles 08:22:12 SkyScan query 08:22:13 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.33<-13422 Statuses=0009 0009 08:22:13 Msec=0 True Az=152.715 Ze=-21.33 Az status=0009 Ze status=0009 08:22:13 Check angles 08:22:13 SkyScan query 08:22:13 SkyScan query done: ret=0 az=134.79<-8986 ze=0.06<-11996 Statuses=0009 0009 08:22:13 Msec=750 True Az=134.79 Ze=0.06 Az status=0009 Ze status=0009 08:22:14 Check angles 08:22:14 SkyScan query 08:22:14 SkyScan query done: ret=0 az=117.315<-7821 ze=21.03<-10598 Statuses=0009 0009 08:22:14 Msec=1500 True Az=117.315 Ze=21.03 Az status=0009 Ze status=0009 08:22:14 Check angles 08:22:14 SkyScan query 08:22:15 SkyScan query done: ret=0 az=99.915<-6661 ze=41.985<-9201 Statuses=0009 0009 08:22:15 Msec=2250 True Az=99.915 Ze=41.985 Az status=0009 Ze status=0009 08:22:15 Check angles 08:22:15 SkyScan query 08:22:16 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 08:22:16 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 08:22:16 Check angles 08:22:16 SkyScan query 08:22:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:22:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:22:16 Message to Master queued w/err=0: serial=5562 error=0 08:22:21 Received message from Master: op=Filter serial=5563 08:22:21 Color wheel filter change from 0 to 0 08:22:21 FLIGetFilterPos err=0 currentPosition=0 08:22:21 FLIGetStepsRemaining err=0 RemainingSteps=0 08:22:21 Filter is already there-color wheel unchanged 08:22:22 Received message from Master: op=Shutter serial=5564 08:22:22 Shutter LASER close 08:22:22 Received message from Camera: op=State serial=5566 08:22:22 GetSingleValue result=40 Value=cccccccc 08:22:22 SkyScan query 08:22:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:22:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:22 Parameters OK 08:22:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:22 Set A/D data flow result=40 08:22:22 Set A/D channel type result=40 08:22:22 Set A/D encoding result=40 08:22:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:22 Set channel filter=0.000000e+000 result=40 08:22:22 Config A/D Result=40 08:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:22 Get A/D filter: -9.255963e+061 result=40 08:22:22 Get A/D value=-858993460 result=40 08:22:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:22:22 Parameters OK 08:22:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:22:22 Set A/D data flow result=40 08:22:22 Set A/D channel type result=40 08:22:22 Set A/D encoding result=40 08:22:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:22:22 Set channel filter=0.000000e+000 result=40 08:22:22 Config A/D Result=40 08:22:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:22:22 Get A/D filter: -9.255963e+061 result=40 08:22:22 Get A/D value=-858993460 result=40 08:22:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:22:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:22:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:22:22 Aux= 08:22:22 Message to Camera, serial 5566 queued 08:22:53 Received message from Master: op=PointingHead serial=5573 08:22:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:22:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:22:53 Point started: ret=0 08:22:53 point_skyscan result=0 08:22:54 Check angles 08:22:54 SkyScan query 08:22:55 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 08:22:55 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 08:22:55 Check angles 08:22:55 SkyScan query 08:22:56 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 08:22:56 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 08:22:56 Check angles 08:22:56 SkyScan query 08:22:56 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 08:22:56 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 08:22:56 Check angles 08:22:56 SkyScan query 08:22:57 SkyScan query done: ret=0 az=161.355<-10757 ze=38.505<-9433 Statuses=0009 0008 08:22:57 Msec=2250 True Az=161.355 Ze=38.505 Az status=0009 Ze status=0008 08:22:57 Check angles 08:22:57 SkyScan query 08:22:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 08:22:58 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 08:22:58 Check angles 08:22:58 SkyScan query 08:22:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:22:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:22:59 Message to Master queued w/err=0: serial=5573 error=0 08:23:04 Received message from Master: op=Filter serial=5574 08:23:04 Color wheel filter change from 0 to 0 08:23:04 FLIGetFilterPos err=0 currentPosition=0 08:23:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:04 Filter is already there-color wheel unchanged 08:23:04 Received message from Master: op=Shutter serial=5575 08:23:04 Shutter LASER close 08:23:04 Received message from Camera: op=State serial=5577 08:23:04 GetSingleValue result=40 Value=cccccccc 08:23:04 SkyScan query 08:23:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:23:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:04 Parameters OK 08:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:04 Set A/D data flow result=40 08:23:04 Set A/D channel type result=40 08:23:04 Set A/D encoding result=40 08:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:04 Set channel filter=0.000000e+000 result=40 08:23:04 Config A/D Result=40 08:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:04 Get A/D filter: -9.255963e+061 result=40 08:23:04 Get A/D value=-858993460 result=40 08:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:04 Parameters OK 08:23:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:04 Set A/D data flow result=40 08:23:04 Set A/D channel type result=40 08:23:04 Set A/D encoding result=40 08:23:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:04 Set channel filter=0.000000e+000 result=40 08:23:04 Config A/D Result=40 08:23:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:04 Get A/D filter: -9.255963e+061 result=40 08:23:04 Get A/D value=-858993460 result=40 08:23:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:04 Aux= 08:23:04 Message to Camera, serial 5577 queued 08:23:35 Received message from Master: op=PointingHead serial=5584 08:23:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:23:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:23:36 Point started: ret=0 08:23:36 point_skyscan result=0 08:23:36 Check angles 08:23:36 SkyScan query 08:23:37 SkyScan query done: ret=0 az=152.61<-10174 ze=8.19<-11454 Statuses=0009 0009 08:23:37 Msec=0 True Az=152.61 Ze=8.19 Az status=0009 Ze status=0009 08:23:37 Check angles 08:23:37 SkyScan query 08:23:38 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.765<-12851 Statuses=0009 0009 08:23:38 Msec=750 True Az=135.09 Ze=-12.765 Az status=0009 Ze status=0009 08:23:38 Check angles 08:23:38 SkyScan query 08:23:38 SkyScan query done: ret=0 az=117.555<-7837 ze=-33.675<-14245 Statuses=0009 0009 08:23:38 Msec=1500 True Az=117.555 Ze=-33.675 Az status=0009 Ze status=0009 08:23:39 Check angles 08:23:39 SkyScan query 08:23:39 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.54<-15436 Statuses=0009 0009 08:23:39 Msec=2250 True Az=100.275 Ze=-51.54 Az status=0009 Ze status=0009 08:23:39 Check angles 08:23:39 SkyScan query 08:23:40 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:23:40 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:23:40 Check angles 08:23:40 SkyScan query 08:23:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 08:23:41 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 08:23:41 Message to Master queued w/err=0: serial=5584 error=0 08:23:46 Received message from Master: op=Filter serial=5585 08:23:46 Color wheel filter change from 0 to 0 08:23:46 FLIGetFilterPos err=0 currentPosition=0 08:23:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:23:46 Filter is already there-color wheel unchanged 08:23:46 Received message from Master: op=Shutter serial=5586 08:23:46 Shutter LASER close 08:23:46 Received message from Camera: op=State serial=5588 08:23:46 GetSingleValue result=40 Value=cccccccc 08:23:46 SkyScan query 08:23:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:23:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:46 Parameters OK 08:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:46 Set A/D data flow result=40 08:23:46 Set A/D channel type result=40 08:23:46 Set A/D encoding result=40 08:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:46 Set channel filter=0.000000e+000 result=40 08:23:46 Config A/D Result=40 08:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:46 Get A/D filter: -9.255963e+061 result=40 08:23:46 Get A/D value=-858993460 result=40 08:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:23:46 Parameters OK 08:23:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:23:46 Set A/D data flow result=40 08:23:46 Set A/D channel type result=40 08:23:46 Set A/D encoding result=40 08:23:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:23:46 Set channel filter=0.000000e+000 result=40 08:23:46 Config A/D Result=40 08:23:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:23:46 Get A/D filter: -9.255963e+061 result=40 08:23:46 Get A/D value=-858993460 result=40 08:23:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:23:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:23:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:23:46 Aux= 08:23:46 Message to Camera, serial 5588 queued 08:24:17 Received message from Master: op=PointingHead serial=5595 08:24:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:24:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:24:18 Point started: ret=0 08:24:18 point_skyscan result=0 08:24:18 Check angles 08:24:18 SkyScan query 08:24:19 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.015<-17401 Statuses=0009 0009 08:24:19 Msec=0 True Az=108.78 Ze=-81.015 Az status=0009 Ze status=0009 08:24:19 Check angles 08:24:19 SkyScan query 08:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 08:24:20 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 08:24:20 Check angles 08:24:20 SkyScan query 08:24:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 08:24:20 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 08:24:21 Check angles 08:24:21 SkyScan query 08:24:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 08:24:21 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 08:24:21 Check angles 08:24:21 SkyScan query 08:24:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 08:24:22 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 08:24:22 Check angles 08:24:22 SkyScan query 08:24:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 08:24:23 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 08:24:23 Message to Master queued w/err=0: serial=5595 error=0 08:24:28 Received message from Master: op=Filter serial=5596 08:24:28 Color wheel filter change from 0 to 0 08:24:28 FLIGetFilterPos err=0 currentPosition=0 08:24:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:28 Filter is already there-color wheel unchanged 08:24:28 Received message from Master: op=Shutter serial=5597 08:24:28 Shutter LASER open 08:24:28 Received message from Camera: op=State serial=5599 08:24:28 GetSingleValue result=40 Value=cccccccc 08:24:28 SkyScan query 08:24:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:24:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:29 Parameters OK 08:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:29 Set A/D data flow result=40 08:24:29 Set A/D channel type result=40 08:24:29 Set A/D encoding result=40 08:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:29 Set channel filter=0.000000e+000 result=40 08:24:29 Config A/D Result=40 08:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:29 Get A/D filter: -9.255963e+061 result=40 08:24:29 Get A/D value=-858993460 result=40 08:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:29 Parameters OK 08:24:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:29 Set A/D data flow result=40 08:24:29 Set A/D channel type result=40 08:24:29 Set A/D encoding result=40 08:24:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:29 Set channel filter=0.000000e+000 result=40 08:24:29 Config A/D Result=40 08:24:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:29 Get A/D filter: -9.255963e+061 result=40 08:24:29 Get A/D value=-858993460 result=40 08:24:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:29 Aux= 08:24:29 Message to Camera, serial 5599 queued 08:24:31 Received message from Master: op=Shutter serial=5603 08:24:31 Shutter LASER close 08:24:31 Received message from Master: op=PointingHead serial=5607 08:24:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:24:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:24:32 Point started: ret=0 08:24:32 point_skyscan result=0 08:24:33 Check angles 08:24:33 SkyScan query 08:24:33 SkyScan query done: ret=0 az=90.075<-6005 ze=157.41<-1506 Statuses=0009 0009 08:24:33 Msec=0 True Az=90.075 Ze=157.41 Az status=0009 Ze status=0009 08:24:33 Check angles 08:24:33 SkyScan query 08:24:34 SkyScan query done: ret=0 az=72.285<-4819 ze=136.02<-2932 Statuses=0009 0009 08:24:34 Msec=750 True Az=72.285 Ze=136.02 Az status=0009 Ze status=0009 08:24:34 Check angles 08:24:34 SkyScan query 08:24:35 SkyScan query done: ret=0 az=54.84<-3656 ze=115.08<-4328 Statuses=0009 0009 08:24:35 Msec=1500 True Az=54.84 Ze=115.08 Az status=0009 Ze status=0009 08:24:35 Check angles 08:24:35 SkyScan query 08:24:35 SkyScan query done: ret=0 az=40.845<-2723 ze=94.11<-5726 Statuses=0009 0009 08:24:35 Msec=2250 True Az=40.845 Ze=94.11 Az status=0009 Ze status=0009 08:24:36 Check angles 08:24:36 SkyScan query 08:24:36 SkyScan query done: ret=0 az=40.995<-2733 ze=73.14<-7124 Statuses=0008 0009 08:24:36 Msec=3000 True Az=40.995 Ze=73.14 Az status=0008 Ze status=0009 08:24:36 Check angles 08:24:36 SkyScan query 08:24:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 08:24:37 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 08:24:37 Check angles 08:24:37 SkyScan query 08:24:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:24:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:24:38 Message to Master queued w/err=0: serial=5607 error=0 08:24:43 Received message from Master: op=Filter serial=5608 08:24:43 Color wheel filter change from 0 to 0 08:24:43 FLIGetFilterPos err=0 currentPosition=0 08:24:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:24:43 Filter is already there-color wheel unchanged 08:24:43 Received message from Master: op=Shutter serial=5609 08:24:43 Shutter LASER close 08:24:43 Received message from Camera: op=State serial=5611 08:24:43 GetSingleValue result=40 Value=cccccccc 08:24:43 SkyScan query 08:24:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:24:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:44 Parameters OK 08:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:44 Set A/D data flow result=40 08:24:44 Set A/D channel type result=40 08:24:44 Set A/D encoding result=40 08:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:44 Set channel filter=0.000000e+000 result=40 08:24:44 Config A/D Result=40 08:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:44 Get A/D filter: -9.255963e+061 result=40 08:24:44 Get A/D value=-858993460 result=40 08:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:24:44 Parameters OK 08:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:24:44 Set A/D data flow result=40 08:24:44 Set A/D channel type result=40 08:24:44 Set A/D encoding result=40 08:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:24:44 Set channel filter=0.000000e+000 result=40 08:24:44 Config A/D Result=40 08:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:24:44 Get A/D filter: -9.255963e+061 result=40 08:24:44 Get A/D value=-858993460 result=40 08:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:24:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:24:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:24:44 Aux= 08:24:44 Message to Camera, serial 5611 queued 08:25:14 Received message from Master: op=PointingHead serial=5618 08:25:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:25:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:25:15 Point started: ret=0 08:25:15 point_skyscan result=0 08:25:16 Check angles 08:25:16 SkyScan query 08:25:16 SkyScan query done: ret=0 az=64.26<-4284 ze=66.54<-7564 Statuses=0009 0008 08:25:16 Msec=0 True Az=64.26 Ze=66.54 Az status=0009 Ze status=0008 08:25:16 Check angles 08:25:16 SkyScan query 08:25:17 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 08:25:17 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 08:25:17 Check angles 08:25:17 SkyScan query 08:25:18 SkyScan query done: ret=0 az=99.465<-6631 ze=66.495<-7567 Statuses=0009 0008 08:25:18 Msec=1500 True Az=99.465 Ze=66.495 Az status=0009 Ze status=0008 08:25:18 Check angles 08:25:18 SkyScan query 08:25:18 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 08:25:18 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 08:25:19 Check angles 08:25:19 SkyScan query 08:25:19 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 08:25:19 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 08:25:19 Check angles 08:25:19 SkyScan query 08:25:20 SkyScan query done: ret=0 az=151.665<-10111 ze=66.495<-7567 Statuses=0009 0008 08:25:20 Msec=3750 True Az=151.665 Ze=66.495 Az status=0009 Ze status=0008 08:25:20 Check angles 08:25:20 SkyScan query 08:25:21 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:25:21 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:25:21 Message to Master queued w/err=0: serial=5618 error=0 08:25:26 Received message from Master: op=Filter serial=5619 08:25:26 Color wheel filter change from 0 to 0 08:25:26 FLIGetFilterPos err=0 currentPosition=0 08:25:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:25:26 Filter is already there-color wheel unchanged 08:25:26 Received message from Master: op=Shutter serial=5620 08:25:26 Shutter LASER close 08:25:26 Received message from Camera: op=State serial=5622 08:25:26 GetSingleValue result=40 Value=cccccccc 08:25:26 SkyScan query 08:25:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:26 Parameters OK 08:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:26 Set A/D data flow result=40 08:25:26 Set A/D channel type result=40 08:25:26 Set A/D encoding result=40 08:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:26 Set channel filter=0.000000e+000 result=40 08:25:26 Config A/D Result=40 08:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:26 Get A/D filter: -9.255963e+061 result=40 08:25:26 Get A/D value=-858993460 result=40 08:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:25:26 Parameters OK 08:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:25:26 Set A/D data flow result=40 08:25:26 Set A/D channel type result=40 08:25:26 Set A/D encoding result=40 08:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:25:26 Set channel filter=0.000000e+000 result=40 08:25:26 Config A/D Result=40 08:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:25:26 Get A/D filter: -9.255963e+061 result=40 08:25:26 Get A/D value=-858993460 result=40 08:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:25:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:25:26 Aux= 08:25:26 Message to Camera, serial 5622 queued 08:25:57 Received message from Master: op=PointingHead serial=5629 08:25:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:25:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:25:58 Point started: ret=0 08:25:58 point_skyscan result=0 08:25:58 Check angles 08:25:58 SkyScan query 08:25:59 SkyScan query done: ret=0 az=135.165<-9011 ze=36.9<-9540 Statuses=0009 0009 08:25:59 Msec=0 True Az=135.165 Ze=36.9 Az status=0009 Ze status=0009 08:25:59 Check angles 08:25:59 SkyScan query 08:26:00 SkyScan query done: ret=0 az=117.33<-7822 ze=15.525<-10965 Statuses=0009 0009 08:26:00 Msec=750 True Az=117.33 Ze=15.525 Az status=0009 Ze status=0009 08:26:00 Check angles 08:26:00 SkyScan query 08:26:00 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.46<-12364 Statuses=0009 0009 08:26:00 Msec=1500 True Az=99.915 Ze=-5.46 Az status=0009 Ze status=0009 08:26:01 Check angles 08:26:01 SkyScan query 08:26:01 SkyScan query done: ret=0 az=82.47<-5498 ze=-26.4<-13760 Statuses=0009 0009 08:26:01 Msec=2250 True Az=82.47 Ze=-26.4 Az status=0009 Ze status=0009 08:26:01 Check angles 08:26:01 SkyScan query 08:26:02 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.565<-14571 Statuses=0009 0008 08:26:02 Msec=3000 True Az=64.905 Ze=-38.565 Az status=0009 Ze status=0008 08:26:02 Check angles 08:26:02 SkyScan query 08:26:03 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.535<-14569 Statuses=0009 0008 08:26:03 Msec=3750 True Az=47.445 Ze=-38.535 Az status=0009 Ze status=0008 08:26:03 Check angles 08:26:03 SkyScan query 08:26:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:26:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:26:03 Message to Master queued w/err=0: serial=5629 error=0 08:26:08 Received message from Master: op=Filter serial=5630 08:26:08 Color wheel filter change from 0 to 0 08:26:08 FLIGetFilterPos err=0 currentPosition=0 08:26:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:08 Filter is already there-color wheel unchanged 08:26:09 Received message from Master: op=Shutter serial=5631 08:26:09 Shutter LASER close 08:26:09 Received message from Camera: op=State serial=5633 08:26:09 GetSingleValue result=40 Value=cccccccc 08:26:09 SkyScan query 08:26:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:26:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:09 Parameters OK 08:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:09 Set A/D data flow result=40 08:26:09 Set A/D channel type result=40 08:26:09 Set A/D encoding result=40 08:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:09 Set channel filter=0.000000e+000 result=40 08:26:09 Config A/D Result=40 08:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:09 Get A/D filter: -9.255963e+061 result=40 08:26:09 Get A/D value=-858993460 result=40 08:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:09 Parameters OK 08:26:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:09 Set A/D data flow result=40 08:26:09 Set A/D channel type result=40 08:26:09 Set A/D encoding result=40 08:26:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:09 Set channel filter=0.000000e+000 result=40 08:26:09 Config A/D Result=40 08:26:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:09 Get A/D filter: -9.255963e+061 result=40 08:26:09 Get A/D value=-858993460 result=40 08:26:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:09 Aux= 08:26:09 Message to Camera, serial 5633 queued 08:26:40 Received message from Master: op=PointingHead serial=5640 08:26:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:26:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:26:40 Point started: ret=0 08:26:40 point_skyscan result=0 08:26:41 Check angles 08:26:41 SkyScan query 08:26:42 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.475<-16565 Statuses=0009 0009 08:26:42 Msec=0 True Az=63.99 Ze=-68.475 Az status=0009 Ze status=0009 08:26:42 Check angles 08:26:42 SkyScan query 08:26:43 SkyScan query done: ret=0 az=81.63<-5442 ze=-89.445<-17963 Statuses=0009 0009 08:26:43 Msec=750 True Az=81.63 Ze=-89.445 Az status=0009 Ze status=0009 08:26:43 Check angles 08:26:43 SkyScan query 08:26:43 SkyScan query done: ret=0 az=99.195<-6613 ze=-110.385<-19359 Statuses=0009 0009 08:26:43 Msec=1500 True Az=99.195 Ze=-110.385 Az status=0009 Ze status=0009 08:26:43 Check angles 08:26:43 SkyScan query 08:26:44 SkyScan query done: ret=0 az=116.625<-7775 ze=-131.325<-20755 Statuses=0009 0009 08:26:44 Msec=2250 True Az=116.625 Ze=-131.325 Az status=0009 Ze status=0009 08:26:44 Check angles 08:26:44 SkyScan query 08:26:45 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 08:26:45 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 08:26:45 Check angles 08:26:45 SkyScan query 08:26:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:26:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:26:46 Message to Master queued w/err=0: serial=5640 error=0 08:26:51 Received message from Master: op=Filter serial=5641 08:26:51 Color wheel filter change from 0 to 0 08:26:51 FLIGetFilterPos err=0 currentPosition=0 08:26:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:26:51 Filter is already there-color wheel unchanged 08:26:51 Received message from Master: op=Shutter serial=5642 08:26:51 Shutter LASER close 08:26:51 Received message from Camera: op=State serial=5644 08:26:51 GetSingleValue result=40 Value=cccccccc 08:26:51 SkyScan query 08:26:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:26:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:51 Parameters OK 08:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:51 Set A/D data flow result=40 08:26:51 Set A/D channel type result=40 08:26:51 Set A/D encoding result=40 08:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:51 Set channel filter=0.000000e+000 result=40 08:26:51 Config A/D Result=40 08:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:51 Get A/D filter: -9.255963e+061 result=40 08:26:51 Get A/D value=-858993460 result=40 08:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:26:51 Parameters OK 08:26:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:26:51 Set A/D data flow result=40 08:26:51 Set A/D channel type result=40 08:26:51 Set A/D encoding result=40 08:26:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:26:51 Set channel filter=0.000000e+000 result=40 08:26:51 Config A/D Result=40 08:26:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:26:51 Get A/D filter: -9.255963e+061 result=40 08:26:51 Get A/D value=-858993460 result=40 08:26:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:26:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:26:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:26:51 Aux= 08:26:51 Message to Camera, serial 5644 queued 08:27:22 Received message from Master: op=PointingHead serial=5651 08:27:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:27:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:27:23 Point started: ret=0 08:27:23 point_skyscan result=0 08:27:23 Check angles 08:27:23 SkyScan query 08:27:24 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.21<-23414 Statuses=0009 0009 08:27:24 Msec=0 True Az=113.025 Ze=-171.21 Az status=0009 Ze status=0009 08:27:24 Check angles 08:27:24 SkyScan query 08:27:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:27:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:27:25 Message to Master queued w/err=0: serial=5651 error=0 08:27:30 Received message from Master: op=Filter serial=5652 08:27:30 Color wheel filter change from 0 to 0 08:27:30 FLIGetFilterPos err=0 currentPosition=0 08:27:30 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:30 Filter is already there-color wheel unchanged 08:27:30 Received message from Master: op=Shutter serial=5653 08:27:30 Shutter LASER open 08:27:30 Received message from Camera: op=State serial=5655 08:27:30 GetSingleValue result=40 Value=cccccccc 08:27:30 SkyScan query 08:27:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:27:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:31 Parameters OK 08:27:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:31 Set A/D data flow result=40 08:27:31 Set A/D channel type result=40 08:27:31 Set A/D encoding result=40 08:27:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:31 Set channel filter=0.000000e+000 result=40 08:27:31 Config A/D Result=40 08:27:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:31 Get A/D filter: -9.255963e+061 result=40 08:27:31 Get A/D value=-858993460 result=40 08:27:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:31 Parameters OK 08:27:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:31 Set A/D data flow result=40 08:27:31 Set A/D channel type result=40 08:27:31 Set A/D encoding result=40 08:27:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:31 Set channel filter=0.000000e+000 result=40 08:27:31 Config A/D Result=40 08:27:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:31 Get A/D filter: -9.255963e+061 result=40 08:27:31 Get A/D value=-858993460 result=40 08:27:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:31 Aux= 08:27:31 Message to Camera, serial 5655 queued 08:27:33 Received message from Master: op=Shutter serial=5659 08:27:33 Shutter LASER close 08:27:34 Received message from Master: op=PointingHead serial=5663 08:27:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:27:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:27:34 Point started: ret=0 08:27:34 point_skyscan result=0 08:27:35 Check angles 08:27:35 SkyScan query 08:27:35 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.055<-21537 Statuses=0009 0009 08:27:35 Msec=0 True Az=136.17 Ze=-143.055 Az status=0009 Ze status=0009 08:27:35 Check angles 08:27:35 SkyScan query 08:27:36 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.085<-20139 Statuses=0009 0009 08:27:36 Msec=750 True Az=153.585 Ze=-122.085 Az status=0009 Ze status=0009 08:27:36 Check angles 08:27:36 SkyScan query 08:27:37 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.175<-18745 Statuses=0009 0009 08:27:37 Msec=1500 True Az=171.03 Ze=-101.175 Az status=0009 Ze status=0009 08:27:37 Check angles 08:27:37 SkyScan query 08:27:38 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.205<-17347 Statuses=0008 0009 08:27:38 Msec=2250 True Az=176.025 Ze=-80.205 Az status=0008 Ze status=0009 08:27:38 Check angles 08:27:38 SkyScan query 08:27:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.25<-15950 Statuses=0008 0009 08:27:38 Msec=3000 True Az=175.995 Ze=-59.25 Az status=0008 Ze status=0009 08:27:38 Check angles 08:27:38 SkyScan query 08:27:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:27:39 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:27:39 Message to Master queued w/err=0: serial=5663 error=0 08:27:44 Received message from Master: op=Filter serial=5664 08:27:44 Color wheel filter change from 0 to 0 08:27:44 FLIGetFilterPos err=0 currentPosition=0 08:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 08:27:44 Filter is already there-color wheel unchanged 08:27:44 Received message from Master: op=Shutter serial=5665 08:27:44 Shutter LASER close 08:27:44 Received message from Camera: op=State serial=5667 08:27:44 GetSingleValue result=40 Value=cccccccc 08:27:44 SkyScan query 08:27:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:45 Parameters OK 08:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:45 Set A/D data flow result=40 08:27:45 Set A/D channel type result=40 08:27:45 Set A/D encoding result=40 08:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:45 Set channel filter=0.000000e+000 result=40 08:27:45 Config A/D Result=40 08:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:45 Get A/D filter: -9.255963e+061 result=40 08:27:45 Get A/D value=-858993460 result=40 08:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:27:45 Parameters OK 08:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:27:45 Set A/D data flow result=40 08:27:45 Set A/D channel type result=40 08:27:45 Set A/D encoding result=40 08:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:27:45 Set channel filter=0.000000e+000 result=40 08:27:45 Config A/D Result=40 08:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:27:45 Get A/D filter: -9.255963e+061 result=40 08:27:45 Get A/D value=-858993460 result=40 08:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:27:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:27:45 Aux= 08:27:45 Message to Camera, serial 5667 queued 08:28:16 Received message from Master: op=PointingHead serial=5674 08:28:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:28:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:28:16 Point started: ret=0 08:28:16 point_skyscan result=0 08:28:17 Check angles 08:28:17 SkyScan query 08:28:17 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.555<-13437 Statuses=0009 0009 08:28:17 Msec=0 True Az=152.76 Ze=-21.555 Az status=0009 Ze status=0009 08:28:18 Check angles 08:28:18 SkyScan query 08:28:18 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.585<-12039 Statuses=0009 0009 08:28:18 Msec=750 True Az=135.375 Ze=-0.585 Az status=0009 Ze status=0009 08:28:18 Check angles 08:28:18 SkyScan query 08:28:19 SkyScan query done: ret=0 az=117.795<-7853 ze=20.37<-10642 Statuses=0009 0009 08:28:19 Msec=1500 True Az=117.795 Ze=20.37 Az status=0009 Ze status=0009 08:28:19 Check angles 08:28:19 SkyScan query 08:28:20 SkyScan query done: ret=0 az=100.35<-6690 ze=41.34<-9244 Statuses=0009 0009 08:28:20 Msec=2250 True Az=100.35 Ze=41.34 Az status=0009 Ze status=0009 08:28:20 Check angles 08:28:20 SkyScan query 08:28:21 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 08:28:21 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 08:28:21 Check angles 08:28:21 SkyScan query 08:28:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:28:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:28:21 Message to Master queued w/err=0: serial=5674 error=0 08:28:26 Received message from Master: op=Filter serial=5675 08:28:26 Color wheel filter change from 0 to 0 08:28:26 FLIGetFilterPos err=0 currentPosition=0 08:28:26 FLIGetStepsRemaining err=0 RemainingSteps=0 08:28:26 Filter is already there-color wheel unchanged 08:28:26 Received message from Master: op=Shutter serial=5676 08:28:26 Shutter LASER close 08:28:26 Received message from Camera: op=State serial=5678 08:28:26 GetSingleValue result=40 Value=cccccccc 08:28:26 SkyScan query 08:28:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:28:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:27 Parameters OK 08:28:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:27 Set A/D data flow result=40 08:28:27 Set A/D channel type result=40 08:28:27 Set A/D encoding result=40 08:28:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:27 Set channel filter=0.000000e+000 result=40 08:28:27 Config A/D Result=40 08:28:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:27 Get A/D filter: -9.255963e+061 result=40 08:28:27 Get A/D value=-858993460 result=40 08:28:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:28:27 Parameters OK 08:28:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:28:27 Set A/D data flow result=40 08:28:27 Set A/D channel type result=40 08:28:27 Set A/D encoding result=40 08:28:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:28:27 Set channel filter=0.000000e+000 result=40 08:28:27 Config A/D Result=40 08:28:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:28:27 Get A/D filter: -9.255963e+061 result=40 08:28:27 Get A/D value=-858993460 result=40 08:28:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:28:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:28:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:28:27 Aux= 08:28:27 Message to Camera, serial 5678 queued 08:28:58 Received message from Master: op=PointingHead serial=5685 08:28:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:28:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:28:58 Point started: ret=0 08:28:58 point_skyscan result=0 08:28:59 Check angles 08:28:59 SkyScan query 08:29:00 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 08:29:00 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 08:29:00 Check angles 08:29:00 SkyScan query 08:29:00 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 08:29:00 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 08:29:01 Check angles 08:29:01 SkyScan query 08:29:01 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 08:29:01 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 08:29:01 Check angles [UTC 2018-12-4 08:29:01] 08:29:01 SkyScan query 08:29:02 SkyScan query done: ret=0 az=163.65<-10910 ze=38.505<-9433 Statuses=0009 0008 08:29:02 Msec=2250 True Az=163.65 Ze=38.505 Az status=0009 Ze status=0008 08:29:02 Check angles 08:29:02 SkyScan query 08:29:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:29:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:29:03 Check angles 08:29:03 SkyScan query 08:29:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:29:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:29:03 Message to Master queued w/err=0: serial=5685 error=0 08:29:08 Received message from Master: op=Filter serial=5686 08:29:08 Color wheel filter change from 0 to 0 08:29:08 FLIGetFilterPos err=0 currentPosition=0 08:29:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:08 Filter is already there-color wheel unchanged 08:29:09 Received message from Master: op=Shutter serial=5687 08:29:09 Shutter LASER close 08:29:09 Received message from Camera: op=State serial=5689 08:29:09 GetSingleValue result=40 Value=cccccccc 08:29:09 SkyScan query 08:29:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:29:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:09 Parameters OK 08:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:09 Set A/D data flow result=40 08:29:09 Set A/D channel type result=40 08:29:09 Set A/D encoding result=40 08:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:09 Set channel filter=0.000000e+000 result=40 08:29:09 Config A/D Result=40 08:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:09 Get A/D filter: -9.255963e+061 result=40 08:29:09 Get A/D value=-858993460 result=40 08:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:09 Parameters OK 08:29:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:09 Set A/D data flow result=40 08:29:09 Set A/D channel type result=40 08:29:09 Set A/D encoding result=40 08:29:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:09 Set channel filter=0.000000e+000 result=40 08:29:09 Config A/D Result=40 08:29:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:09 Get A/D filter: -9.255963e+061 result=40 08:29:09 Get A/D value=-858993460 result=40 08:29:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:09 Aux= 08:29:09 Message to Camera, serial 5689 queued 08:29:40 Received message from Master: op=PointingHead serial=5696 08:29:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:29:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:29:40 Point started: ret=0 08:29:40 point_skyscan result=0 08:29:41 Check angles 08:29:41 SkyScan query 08:29:42 SkyScan query done: ret=0 az=153.105<-10207 ze=8.805<-11413 Statuses=0009 0009 08:29:42 Msec=0 True Az=153.105 Ze=8.805 Az status=0009 Ze status=0009 08:29:42 Check angles 08:29:42 SkyScan query 08:29:42 SkyScan query done: ret=0 az=135.69<-9046 ze=-12.135<-12809 Statuses=0009 0009 08:29:42 Msec=750 True Az=135.69 Ze=-12.135 Az status=0009 Ze status=0009 08:29:43 Check angles 08:29:43 SkyScan query 08:29:43 SkyScan query done: ret=0 az=118.155<-7877 ze=-33.105<-14207 Statuses=0009 0009 08:29:43 Msec=1500 True Az=118.155 Ze=-33.105 Az status=0009 Ze status=0009 08:29:43 Check angles 08:29:43 SkyScan query 08:29:44 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.51<-15434 Statuses=0009 0009 08:29:44 Msec=2250 True Az=100.725 Ze=-51.51 Az status=0009 Ze status=0009 08:29:44 Check angles 08:29:44 SkyScan query 08:29:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:29:45 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:29:45 Check angles 08:29:45 SkyScan query 08:29:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:29:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:29:45 Message to Master queued w/err=0: serial=5696 error=0 08:29:50 Received message from Master: op=Filter serial=5697 08:29:50 Color wheel filter change from 0 to 0 08:29:50 FLIGetFilterPos err=0 currentPosition=0 08:29:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:29:50 Filter is already there-color wheel unchanged 08:29:51 Received message from Master: op=Shutter serial=5698 08:29:51 Shutter LASER close 08:29:51 Received message from Camera: op=State serial=5700 08:29:51 GetSingleValue result=40 Value=cccccccc 08:29:51 SkyScan query 08:29:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:29:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:51 Parameters OK 08:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:51 Set A/D data flow result=40 08:29:51 Set A/D channel type result=40 08:29:51 Set A/D encoding result=40 08:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:51 Set channel filter=0.000000e+000 result=40 08:29:51 Config A/D Result=40 08:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:51 Get A/D filter: -9.255963e+061 result=40 08:29:51 Get A/D value=-858993460 result=40 08:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:29:51 Parameters OK 08:29:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:29:51 Set A/D data flow result=40 08:29:51 Set A/D channel type result=40 08:29:51 Set A/D encoding result=40 08:29:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:29:51 Set channel filter=0.000000e+000 result=40 08:29:51 Config A/D Result=40 08:29:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:29:51 Get A/D filter: -9.255963e+061 result=40 08:29:51 Get A/D value=-858993460 result=40 08:29:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:29:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:29:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:29:51 Aux= 08:29:51 Message to Camera, serial 5700 queued 08:30:22 Received message from Master: op=PointingHead serial=5707 08:30:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:30:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:30:22 Point started: ret=0 08:30:22 point_skyscan result=0 08:30:23 Check angles 08:30:23 SkyScan query 08:30:24 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.675<-17445 Statuses=0009 0009 08:30:24 Msec=0 True Az=109.395 Ze=-81.675 Az status=0009 Ze status=0009 08:30:24 Check angles 08:30:24 SkyScan query 08:30:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 08:30:24 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 08:30:25 Check angles 08:30:25 SkyScan query 08:30:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.02<-20268 Statuses=0008 0009 08:30:25 Msec=1500 True Az=112.995 Ze=-124.02 Az status=0008 Ze status=0009 08:30:25 Check angles 08:30:25 SkyScan query 08:30:26 SkyScan query done: ret=0 az=113.01<-7534 ze=-145.425<-21695 Statuses=0008 0009 08:30:26 Msec=2250 True Az=113.01 Ze=-145.425 Az status=0008 Ze status=0009 08:30:26 Check angles 08:30:26 SkyScan query 08:30:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.815<-23121 Statuses=0008 0009 08:30:27 Msec=3000 True Az=112.995 Ze=-166.815 Az status=0008 Ze status=0009 08:30:27 Check angles 08:30:27 SkyScan query 08:30:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 08:30:28 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 08:30:28 Message to Master queued w/err=0: serial=5707 error=0 08:30:33 Received message from Master: op=Filter serial=5708 08:30:33 Color wheel filter change from 0 to 0 08:30:33 FLIGetFilterPos err=0 currentPosition=0 08:30:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:33 Filter is already there-color wheel unchanged 08:30:33 Received message from Master: op=Shutter serial=5709 08:30:33 Shutter LASER open 08:30:33 Received message from Camera: op=State serial=5711 08:30:33 GetSingleValue result=40 Value=cccccccc 08:30:33 SkyScan query 08:30:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:30:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:33 Parameters OK 08:30:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:33 Set A/D data flow result=40 08:30:33 Set A/D channel type result=40 08:30:33 Set A/D encoding result=40 08:30:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:33 Set channel filter=0.000000e+000 result=40 08:30:33 Config A/D Result=40 08:30:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:33 Get A/D filter: -9.255963e+061 result=40 08:30:33 Get A/D value=-858993460 result=40 08:30:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:33 Parameters OK 08:30:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:33 Set A/D data flow result=40 08:30:33 Set A/D channel type result=40 08:30:33 Set A/D encoding result=40 08:30:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:33 Set channel filter=0.000000e+000 result=40 08:30:33 Config A/D Result=40 08:30:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:33 Get A/D filter: -9.255963e+061 result=40 08:30:33 Get A/D value=-858993460 result=40 08:30:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:33 Aux= 08:30:33 Message to Camera, serial 5711 queued 08:30:36 Received message from Master: op=Shutter serial=5715 08:30:36 Shutter LASER close 08:30:36 Received message from Master: op=PointingHead serial=5719 08:30:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:30:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:30:37 Point started: ret=0 08:30:37 point_skyscan result=0 08:30:37 Check angles 08:30:37 SkyScan query 08:30:38 SkyScan query done: ret=0 az=89.805<-5987 ze=157.11<-1526 Statuses=0009 0009 08:30:38 Msec=0 True Az=89.805 Ze=157.11 Az status=0009 Ze status=0009 08:30:38 Check angles 08:30:38 SkyScan query 08:30:39 SkyScan query done: ret=0 az=72.285<-4819 ze=136.14<-2924 Statuses=0009 0009 08:30:39 Msec=750 True Az=72.285 Ze=136.14 Az status=0009 Ze status=0009 08:30:39 Check angles 08:30:39 SkyScan query 08:30:40 SkyScan query done: ret=0 az=54.915<-3661 ze=115.185<-4321 Statuses=0009 0009 08:30:40 Msec=1500 True Az=54.915 Ze=115.185 Az status=0009 Ze status=0009 08:30:40 Check angles 08:30:40 SkyScan query 08:30:40 SkyScan query done: ret=0 az=40.83<-2722 ze=94.2<-5720 Statuses=0009 0009 08:30:40 Msec=2250 True Az=40.83 Ze=94.2 Az status=0009 Ze status=0009 08:30:40 Check angles 08:30:40 SkyScan query 08:30:41 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 08:30:41 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 08:30:41 Check angles 08:30:41 SkyScan query 08:30:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 08:30:42 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 08:30:42 Check angles 08:30:42 SkyScan query 08:30:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:30:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:30:43 Message to Master queued w/err=0: serial=5719 error=0 08:30:48 Received message from Master: op=Filter serial=5720 08:30:48 Color wheel filter change from 0 to 0 08:30:48 FLIGetFilterPos err=0 currentPosition=0 08:30:48 FLIGetStepsRemaining err=0 RemainingSteps=0 08:30:48 Filter is already there-color wheel unchanged 08:30:48 Received message from Master: op=Shutter serial=5721 08:30:48 Shutter LASER close 08:30:48 Received message from Camera: op=State serial=5723 08:30:48 GetSingleValue result=40 Value=cccccccc 08:30:48 SkyScan query 08:30:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:30:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:48 Parameters OK 08:30:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:48 Set A/D data flow result=40 08:30:48 Set A/D channel type result=40 08:30:48 Set A/D encoding result=40 08:30:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:48 Set channel filter=0.000000e+000 result=40 08:30:48 Config A/D Result=40 08:30:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:48 Get A/D filter: -9.255963e+061 result=40 08:30:48 Get A/D value=-858993460 result=40 08:30:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:30:48 Parameters OK 08:30:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:30:48 Set A/D data flow result=40 08:30:48 Set A/D channel type result=40 08:30:48 Set A/D encoding result=40 08:30:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:30:48 Set channel filter=0.000000e+000 result=40 08:30:48 Config A/D Result=40 08:30:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:30:48 Get A/D filter: -9.255963e+061 result=40 08:30:48 Get A/D value=-858993460 result=40 08:30:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:30:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:30:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:30:48 Aux= 08:30:48 Message to Camera, serial 5723 queued 08:31:19 Received message from Master: op=PointingHead serial=5730 08:31:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:31:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:31:20 Point started: ret=0 08:31:20 point_skyscan result=0 08:31:20 Check angles 08:31:20 SkyScan query 08:31:21 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 08:31:21 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 08:31:21 Check angles 08:31:21 SkyScan query 08:31:22 SkyScan query done: ret=0 az=82.38<-5492 ze=66.495<-7567 Statuses=0009 0008 08:31:22 Msec=750 True Az=82.38 Ze=66.495 Az status=0009 Ze status=0008 08:31:22 Check angles 08:31:22 SkyScan query 08:31:23 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 08:31:23 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 08:31:23 Check angles 08:31:23 SkyScan query 08:31:23 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 08:31:23 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 08:31:23 Check angles 08:31:23 SkyScan query 08:31:24 SkyScan query done: ret=0 az=134.625<-8975 ze=66.495<-7567 Statuses=0009 0008 08:31:24 Msec=3000 True Az=134.625 Ze=66.495 Az status=0009 Ze status=0008 08:31:24 Check angles 08:31:24 SkyScan query 08:31:25 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 08:31:25 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 08:31:25 Check angles 08:31:25 SkyScan query 08:31:26 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:31:26 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:31:26 Message to Master queued w/err=0: serial=5730 error=0 08:31:31 Received message from Master: op=Filter serial=5731 08:31:31 Color wheel filter change from 0 to 0 08:31:31 FLIGetFilterPos err=0 currentPosition=0 08:31:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:31:31 Filter is already there-color wheel unchanged 08:31:31 Received message from Master: op=Shutter serial=5732 08:31:31 Shutter LASER close 08:31:31 Received message from Camera: op=State serial=5734 08:31:31 GetSingleValue result=40 Value=cccccccc 08:31:31 SkyScan query 08:31:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:31:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:31 Parameters OK 08:31:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:31 Set A/D data flow result=40 08:31:31 Set A/D channel type result=40 08:31:31 Set A/D encoding result=40 08:31:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:31 Set channel filter=0.000000e+000 result=40 08:31:31 Config A/D Result=40 08:31:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:31 Get A/D filter: -9.255963e+061 result=40 08:31:31 Get A/D value=-858993460 result=40 08:31:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:31:31 Parameters OK 08:31:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:31:31 Set A/D data flow result=40 08:31:31 Set A/D channel type result=40 08:31:31 Set A/D encoding result=40 08:31:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:31:31 Set channel filter=0.000000e+000 result=40 08:31:31 Config A/D Result=40 08:31:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:31:31 Get A/D filter: -9.255963e+061 result=40 08:31:31 Get A/D value=-858993460 result=40 08:31:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:31:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:31:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:31:31 Aux= 08:31:31 Message to Camera, serial 5734 queued 08:32:02 Received message from Master: op=PointingHead serial=5741 08:32:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:32:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:32:03 Point started: ret=0 08:32:03 point_skyscan result=0 08:32:03 Check angles 08:32:03 SkyScan query 08:32:04 SkyScan query done: ret=0 az=135.105<-9007 ze=36.78<-9548 Statuses=0009 0009 08:32:04 Msec=0 True Az=135.105 Ze=36.78 Az status=0009 Ze status=0009 08:32:04 Check angles 08:32:04 SkyScan query 08:32:05 SkyScan query done: ret=0 az=117.51<-7834 ze=15.825<-10945 Statuses=0009 0009 08:32:05 Msec=750 True Az=117.51 Ze=15.825 Az status=0009 Ze status=0009 08:32:05 Check angles 08:32:05 SkyScan query 08:32:05 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.205<-12347 Statuses=0009 0009 08:32:05 Msec=1500 True Az=100.2 Ze=-5.205 Az status=0009 Ze status=0009 08:32:06 Check angles 08:32:06 SkyScan query 08:32:06 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.115<-13741 Statuses=0009 0009 08:32:06 Msec=2250 True Az=82.65 Ze=-26.115 Az status=0009 Ze status=0009 08:32:06 Check angles 08:32:06 SkyScan query 08:32:07 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.55<-14570 Statuses=0009 0008 08:32:07 Msec=3000 True Az=64.815 Ze=-38.55 Az status=0009 Ze status=0008 08:32:07 Check angles 08:32:07 SkyScan query 08:32:08 SkyScan query done: ret=0 az=47.34<-3156 ze=-38.535<-14569 Statuses=0009 0008 08:32:08 Msec=3750 True Az=47.34 Ze=-38.535 Az status=0009 Ze status=0008 08:32:08 Check angles 08:32:08 SkyScan query 08:32:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:32:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:32:08 Message to Master queued w/err=0: serial=5741 error=0 [UTC 2018-12-4 08:32:09] 08:32:13 Received message from Master: op=Filter serial=5742 08:32:13 Color wheel filter change from 0 to 0 08:32:13 FLIGetFilterPos err=0 currentPosition=0 08:32:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:13 Filter is already there-color wheel unchanged 08:32:14 Received message from Master: op=Shutter serial=5743 08:32:14 Shutter LASER close 08:32:14 Received message from Camera: op=State serial=5745 08:32:14 GetSingleValue result=40 Value=cccccccc 08:32:14 SkyScan query 08:32:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:32:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:14 Parameters OK 08:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:14 Set A/D data flow result=40 08:32:14 Set A/D channel type result=40 08:32:14 Set A/D encoding result=40 08:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:14 Set channel filter=0.000000e+000 result=40 08:32:14 Config A/D Result=40 08:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:14 Get A/D filter: -9.255963e+061 result=40 08:32:14 Get A/D value=-858993460 result=40 08:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:14 Parameters OK 08:32:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:14 Set A/D data flow result=40 08:32:14 Set A/D channel type result=40 08:32:14 Set A/D encoding result=40 08:32:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:14 Set channel filter=0.000000e+000 result=40 08:32:14 Config A/D Result=40 08:32:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:14 Get A/D filter: -9.255963e+061 result=40 08:32:14 Get A/D value=-858993460 result=40 08:32:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:14 Aux= 08:32:14 Message to Camera, serial 5745 queued 08:32:45 Received message from Master: op=PointingHead serial=5752 08:32:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:32:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:32:45 Point started: ret=0 08:32:45 point_skyscan result=0 08:32:46 Check angles 08:32:46 SkyScan query 08:32:47 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.235<-16549 Statuses=0009 0009 08:32:47 Msec=0 True Az=63.975 Ze=-68.235 Az status=0009 Ze status=0009 08:32:47 Check angles 08:32:47 SkyScan query 08:32:47 SkyScan query done: ret=0 az=81.57<-5438 ze=-89.205<-17947 Statuses=0009 0009 08:32:47 Msec=750 True Az=81.57 Ze=-89.205 Az status=0009 Ze status=0009 08:32:48 Check angles 08:32:48 SkyScan query 08:32:48 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.145<-19343 Statuses=0009 0009 08:32:48 Msec=1500 True Az=99.12 Ze=-110.145 Az status=0009 Ze status=0009 08:32:48 Check angles 08:32:48 SkyScan query 08:32:49 SkyScan query done: ret=0 az=116.52<-7768 ze=-131.07<-20738 Statuses=0009 0009 08:32:49 Msec=2250 True Az=116.52 Ze=-131.07 Az status=0009 Ze status=0009 08:32:49 Check angles 08:32:49 SkyScan query 08:32:50 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 08:32:50 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 08:32:50 Check angles 08:32:50 SkyScan query 08:32:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:32:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:32:50 Message to Master queued w/err=0: serial=5752 error=0 08:32:55 Received message from Master: op=Filter serial=5753 08:32:55 Color wheel filter change from 0 to 0 08:32:55 FLIGetFilterPos err=0 currentPosition=0 08:32:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:32:55 Filter is already there-color wheel unchanged 08:32:56 Received message from Master: op=Shutter serial=5754 08:32:56 Shutter LASER close 08:32:56 Received message from Camera: op=State serial=5756 08:32:56 GetSingleValue result=40 Value=cccccccc 08:32:56 SkyScan query 08:32:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:32:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:56 Parameters OK 08:32:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:56 Set A/D data flow result=40 08:32:56 Set A/D channel type result=40 08:32:56 Set A/D encoding result=40 08:32:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:56 Set channel filter=0.000000e+000 result=40 08:32:56 Config A/D Result=40 08:32:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:56 Get A/D filter: -9.255963e+061 result=40 08:32:56 Get A/D value=-858993460 result=40 08:32:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:32:56 Parameters OK 08:32:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:32:56 Set A/D data flow result=40 08:32:56 Set A/D channel type result=40 08:32:56 Set A/D encoding result=40 08:32:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:32:56 Set channel filter=0.000000e+000 result=40 08:32:56 Config A/D Result=40 08:32:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:32:56 Get A/D filter: -9.255963e+061 result=40 08:32:56 Get A/D value=-858993460 result=40 08:32:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:32:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:32:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:32:56 Aux= 08:32:56 Message to Camera, serial 5756 queued 08:33:27 Received message from Master: op=PointingHead serial=5763 08:33:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:33:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:33:28 Point started: ret=0 08:33:28 point_skyscan result=0 08:33:28 Check angles 08:33:28 SkyScan query 08:33:29 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.135<-23409 Statuses=0009 0009 08:33:29 Msec=0 True Az=113.025 Ze=-171.135 Az status=0009 Ze status=0009 08:33:29 Check angles 08:33:29 SkyScan query 08:33:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:33:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:33:30 Message to Master queued w/err=0: serial=5763 error=0 08:33:35 Received message from Master: op=Filter serial=5764 08:33:35 Color wheel filter change from 0 to 0 08:33:35 FLIGetFilterPos err=0 currentPosition=0 08:33:35 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:35 Filter is already there-color wheel unchanged 08:33:35 Received message from Master: op=Shutter serial=5765 08:33:35 Shutter LASER open 08:33:35 Received message from Camera: op=State serial=5767 08:33:35 GetSingleValue result=40 Value=cccccccc 08:33:35 SkyScan query 08:33:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:33:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:36 Parameters OK 08:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:36 Set A/D data flow result=40 08:33:36 Set A/D channel type result=40 08:33:36 Set A/D encoding result=40 08:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:36 Set channel filter=0.000000e+000 result=40 08:33:36 Config A/D Result=40 08:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:36 Get A/D filter: -9.255963e+061 result=40 08:33:36 Get A/D value=-858993460 result=40 08:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:36 Parameters OK 08:33:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:36 Set A/D data flow result=40 08:33:36 Set A/D channel type result=40 08:33:36 Set A/D encoding result=40 08:33:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:36 Set channel filter=0.000000e+000 result=40 08:33:36 Config A/D Result=40 08:33:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:36 Get A/D filter: -9.255963e+061 result=40 08:33:36 Get A/D value=-858993460 result=40 08:33:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:36 Aux= 08:33:36 Message to Camera, serial 5767 queued 08:33:38 Received message from Master: op=Shutter serial=5771 08:33:38 Shutter LASER close 08:33:39 Received message from Master: op=PointingHead serial=5775 08:33:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:33:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:33:39 Point started: ret=0 08:33:39 point_skyscan result=0 08:33:40 Check angles 08:33:40 SkyScan query 08:33:40 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.19<-21546 Statuses=0009 0009 08:33:40 Msec=0 True Az=135.945 Ze=-143.19 Az status=0009 Ze status=0009 08:33:40 Check angles 08:33:40 SkyScan query 08:33:41 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.785<-20119 Statuses=0009 0009 08:33:41 Msec=750 True Az=153.81 Ze=-121.785 Az status=0009 Ze status=0009 08:33:41 Check angles 08:33:41 SkyScan query 08:33:42 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.86<-18724 Statuses=0009 0009 08:33:42 Msec=1500 True Az=171.225 Ze=-100.86 Az status=0009 Ze status=0009 08:33:42 Check angles 08:33:42 SkyScan query 08:33:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.905<-17327 Statuses=0008 0009 08:33:43 Msec=2250 True Az=176.01 Ze=-79.905 Az status=0008 Ze status=0009 08:33:43 Check angles 08:33:43 SkyScan query 08:33:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.95<-15930 Statuses=0008 0009 08:33:43 Msec=3000 True Az=175.995 Ze=-58.95 Az status=0008 Ze status=0009 08:33:43 Check angles 08:33:43 SkyScan query 08:33:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:33:44 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:33:44 Message to Master queued w/err=0: serial=5775 error=0 08:33:49 Received message from Master: op=Filter serial=5776 08:33:49 Color wheel filter change from 0 to 0 08:33:49 FLIGetFilterPos err=0 currentPosition=0 08:33:49 FLIGetStepsRemaining err=0 RemainingSteps=0 08:33:49 Filter is already there-color wheel unchanged 08:33:49 Received message from Master: op=Shutter serial=5777 08:33:49 Shutter LASER close 08:33:49 Received message from Camera: op=State serial=5779 08:33:49 GetSingleValue result=40 Value=cccccccc 08:33:49 SkyScan query 08:33:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:33:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:50 Parameters OK 08:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:50 Set A/D data flow result=40 08:33:50 Set A/D channel type result=40 08:33:50 Set A/D encoding result=40 08:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:50 Set channel filter=0.000000e+000 result=40 08:33:50 Config A/D Result=40 08:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:50 Get A/D filter: -9.255963e+061 result=40 08:33:50 Get A/D value=-858993460 result=40 08:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:33:50 Parameters OK 08:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:33:50 Set A/D data flow result=40 08:33:50 Set A/D channel type result=40 08:33:50 Set A/D encoding result=40 08:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:33:50 Set channel filter=0.000000e+000 result=40 08:33:50 Config A/D Result=40 08:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:33:50 Get A/D filter: -9.255963e+061 result=40 08:33:50 Get A/D value=-858993460 result=40 08:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:33:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:33:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:33:50 Aux= 08:33:50 Message to Camera, serial 5779 queued 08:34:21 Received message from Master: op=PointingHead serial=5786 08:34:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:34:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:34:21 Point started: ret=0 08:34:21 point_skyscan result=0 08:34:22 Check angles 08:34:22 SkyScan query 08:34:22 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.57<-13438 Statuses=0009 0009 08:34:22 Msec=0 True Az=152.775 Ze=-21.57 Az status=0009 Ze status=0009 08:34:23 Check angles 08:34:23 SkyScan query 08:34:23 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.615<-12041 Statuses=0009 0009 08:34:23 Msec=750 True Az=135.39 Ze=-0.615 Az status=0009 Ze status=0009 08:34:23 Check angles 08:34:23 SkyScan query 08:34:24 SkyScan query done: ret=0 az=117.825<-7855 ze=20.34<-10644 Statuses=0009 0009 08:34:24 Msec=1500 True Az=117.825 Ze=20.34 Az status=0009 Ze status=0009 08:34:24 Check angles 08:34:24 SkyScan query 08:34:25 SkyScan query done: ret=0 az=100.125<-6675 ze=41.745<-9217 Statuses=0009 0009 08:34:25 Msec=2250 True Az=100.125 Ze=41.745 Az status=0009 Ze status=0009 08:34:25 Check angles 08:34:25 SkyScan query 08:34:26 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:34:26 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:34:26 Check angles 08:34:26 SkyScan query 08:34:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:34:26 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 08:34:26 Message to Master queued w/err=0: serial=5786 error=0 08:34:31 Received message from Master: op=Filter serial=5787 08:34:31 Color wheel filter change from 0 to 0 08:34:31 FLIGetFilterPos err=0 currentPosition=0 08:34:31 FLIGetStepsRemaining err=0 RemainingSteps=0 08:34:31 Filter is already there-color wheel unchanged 08:34:31 Received message from Master: op=Shutter serial=5788 08:34:31 Shutter LASER close 08:34:31 Received message from Camera: op=State serial=5790 08:34:31 GetSingleValue result=40 Value=cccccccc 08:34:31 SkyScan query 08:34:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:34:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:32 Parameters OK 08:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:32 Set A/D data flow result=40 08:34:32 Set A/D channel type result=40 08:34:32 Set A/D encoding result=40 08:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:32 Set channel filter=0.000000e+000 result=40 08:34:32 Config A/D Result=40 08:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:32 Get A/D filter: -9.255963e+061 result=40 08:34:32 Get A/D value=-858993460 result=40 08:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:34:32 Parameters OK 08:34:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:34:32 Set A/D data flow result=40 08:34:32 Set A/D channel type result=40 08:34:32 Set A/D encoding result=40 08:34:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:34:32 Set channel filter=0.000000e+000 result=40 08:34:32 Config A/D Result=40 08:34:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:34:32 Get A/D filter: -9.255963e+061 result=40 08:34:32 Get A/D value=-858993460 result=40 08:34:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:34:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:34:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:34:32 Aux= 08:34:32 Message to Camera, serial 5790 queued 08:35:03 Received message from Master: op=PointingHead serial=5797 08:35:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:35:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:35:03 Point started: ret=0 08:35:03 point_skyscan result=0 08:35:04 Check angles 08:35:04 SkyScan query 08:35:05 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 08:35:05 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 08:35:05 Check angles 08:35:05 SkyScan query 08:35:05 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 08:35:05 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 08:35:05 Check angles 08:35:05 SkyScan query 08:35:06 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 08:35:06 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 08:35:06 Check angles 08:35:06 SkyScan query 08:35:07 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 08:35:07 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 08:35:07 Check angles 08:35:07 SkyScan query 08:35:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 08:35:08 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 08:35:08 Check angles 08:35:08 SkyScan query 08:35:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:35:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:35:08 Message to Master queued w/err=0: serial=5797 error=0 08:35:13 Received message from Master: op=Filter serial=5798 08:35:13 Color wheel filter change from 0 to 0 08:35:13 FLIGetFilterPos err=0 currentPosition=0 08:35:13 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:13 Filter is already there-color wheel unchanged 08:35:14 Received message from Master: op=Shutter serial=5799 08:35:14 Shutter LASER close 08:35:14 Received message from Camera: op=State serial=5801 08:35:14 GetSingleValue result=40 Value=cccccccc 08:35:14 SkyScan query 08:35:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:35:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:14 Parameters OK 08:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:14 Set A/D data flow result=40 08:35:14 Set A/D channel type result=40 08:35:14 Set A/D encoding result=40 08:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:14 Set channel filter=0.000000e+000 result=40 08:35:14 Config A/D Result=40 08:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:14 Get A/D filter: -9.255963e+061 result=40 08:35:14 Get A/D value=-858993460 result=40 08:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:14 Parameters OK 08:35:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:14 Set A/D data flow result=40 08:35:14 Set A/D channel type result=40 08:35:14 Set A/D encoding result=40 08:35:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:14 Set channel filter=0.000000e+000 result=40 08:35:14 Config A/D Result=40 08:35:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:14 Get A/D filter: -9.255963e+061 result=40 08:35:14 Get A/D value=-858993460 result=40 08:35:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:14 Aux= 08:35:14 Message to Camera, serial 5801 queued 08:35:45 Received message from Master: op=PointingHead serial=5808 08:35:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:35:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:35:45 Point started: ret=0 08:35:45 point_skyscan result=0 08:35:46 Check angles 08:35:46 SkyScan query 08:35:47 SkyScan query done: ret=0 az=153.24<-10216 ze=8.91<-11406 Statuses=0009 0009 08:35:47 Msec=0 True Az=153.24 Ze=8.91 Az status=0009 Ze status=0009 08:35:47 Check angles 08:35:47 SkyScan query 08:35:47 SkyScan query done: ret=0 az=135.84<-9056 ze=-12.03<-12802 Statuses=0009 0009 08:35:47 Msec=750 True Az=135.84 Ze=-12.03 Az status=0009 Ze status=0009 08:35:48 Check angles 08:35:48 SkyScan query 08:35:48 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.985<-14199 Statuses=0009 0009 08:35:48 Msec=1500 True Az=118.29 Ze=-32.985 Az status=0009 Ze status=0009 08:35:48 Check angles 08:35:48 SkyScan query 08:35:49 SkyScan query done: ret=0 az=100.86<-6724 ze=-51.495<-15433 Statuses=0009 0009 08:35:49 Msec=2250 True Az=100.86 Ze=-51.495 Az status=0009 Ze status=0009 08:35:49 Check angles 08:35:49 SkyScan query 08:35:50 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 08:35:50 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 08:35:50 Check angles 08:35:50 SkyScan query 08:35:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:35:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:35:50 Message to Master queued w/err=0: serial=5808 error=0 08:35:55 Received message from Master: op=Filter serial=5809 08:35:55 Color wheel filter change from 0 to 0 08:35:55 FLIGetFilterPos err=0 currentPosition=0 08:35:55 FLIGetStepsRemaining err=0 RemainingSteps=0 08:35:55 Filter is already there-color wheel unchanged 08:35:56 Received message from Master: op=Shutter serial=5810 08:35:56 Shutter LASER close 08:35:56 Received message from Camera: op=State serial=5812 08:35:56 GetSingleValue result=40 Value=cccccccc 08:35:56 SkyScan query 08:35:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:35:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:56 Parameters OK 08:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:56 Set A/D data flow result=40 08:35:56 Set A/D channel type result=40 08:35:56 Set A/D encoding result=40 08:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:56 Set channel filter=0.000000e+000 result=40 08:35:56 Config A/D Result=40 08:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:56 Get A/D filter: -9.255963e+061 result=40 08:35:56 Get A/D value=-858993460 result=40 08:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:35:56 Parameters OK 08:35:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:35:56 Set A/D data flow result=40 08:35:56 Set A/D channel type result=40 08:35:56 Set A/D encoding result=40 08:35:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:35:56 Set channel filter=0.000000e+000 result=40 08:35:56 Config A/D Result=40 08:35:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:35:56 Get A/D filter: -9.255963e+061 result=40 08:35:56 Get A/D value=-858993460 result=40 08:35:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:35:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:35:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:35:56 Aux= 08:35:56 Message to Camera, serial 5812 queued 08:36:27 Received message from Master: op=PointingHead serial=5819 08:36:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:36:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:36:27 Point started: ret=0 08:36:27 point_skyscan result=0 08:36:28 Check angles 08:36:28 SkyScan query 08:36:29 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.405<-17427 Statuses=0009 0009 08:36:29 Msec=0 True Az=109.05 Ze=-81.405 Az status=0009 Ze status=0009 08:36:29 Check angles 08:36:29 SkyScan query 08:36:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.36<-18824 Statuses=0008 0009 08:36:29 Msec=750 True Az=113.01 Ze=-102.36 Az status=0008 Ze status=0009 08:36:30 Check angles 08:36:30 SkyScan query 08:36:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 08:36:30 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 08:36:30 Check angles 08:36:30 SkyScan query 08:36:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.125<-21675 Statuses=0008 0009 08:36:31 Msec=2250 True Az=112.995 Ze=-145.125 Az status=0008 Ze status=0009 08:36:31 Check angles 08:36:31 SkyScan query 08:36:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.515<-23101 Statuses=0008 0009 08:36:32 Msec=3000 True Az=112.995 Ze=-166.515 Az status=0008 Ze status=0009 08:36:32 Check angles 08:36:32 SkyScan query 08:36:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:36:33 Msec=3750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:36:33 Message to Master queued w/err=0: serial=5819 error=0 08:36:38 Received message from Master: op=Filter serial=5820 08:36:38 Color wheel filter change from 0 to 0 08:36:38 FLIGetFilterPos err=0 currentPosition=0 08:36:38 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:38 Filter is already there-color wheel unchanged 08:36:38 Received message from Master: op=Shutter serial=5821 08:36:38 Shutter LASER open 08:36:38 Received message from Camera: op=State serial=5823 08:36:38 GetSingleValue result=40 Value=cccccccc 08:36:38 SkyScan query 08:36:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:36:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:39 Parameters OK 08:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:39 Set A/D data flow result=40 08:36:39 Set A/D channel type result=40 08:36:39 Set A/D encoding result=40 08:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:39 Set channel filter=0.000000e+000 result=40 08:36:39 Config A/D Result=40 08:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:39 Get A/D filter: -9.255963e+061 result=40 08:36:39 Get A/D value=-858993460 result=40 08:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:39 Parameters OK 08:36:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:39 Set A/D data flow result=40 08:36:39 Set A/D channel type result=40 08:36:39 Set A/D encoding result=40 08:36:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:39 Set channel filter=0.000000e+000 result=40 08:36:39 Config A/D Result=40 08:36:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:39 Get A/D filter: -9.255963e+061 result=40 08:36:39 Get A/D value=-858993460 result=40 08:36:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:39 Aux= 08:36:39 Message to Camera, serial 5823 queued 08:36:41 Received message from Master: op=Shutter serial=5827 08:36:41 Shutter LASER close 08:36:41 Received message from Master: op=PointingHead serial=5831 08:36:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:36:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:36:42 Point started: ret=0 08:36:42 point_skyscan result=0 08:36:42 Check angles 08:36:42 SkyScan query 08:36:43 SkyScan query done: ret=0 az=89.925<-5995 ze=157.23<-1518 Statuses=0009 0009 08:36:43 Msec=0 True Az=89.925 Ze=157.23 Az status=0009 Ze status=0009 08:36:43 Check angles 08:36:43 SkyScan query 08:36:44 SkyScan query done: ret=0 az=72.435<-4829 ze=136.275<-2915 Statuses=0009 0009 08:36:44 Msec=750 True Az=72.435 Ze=136.275 Az status=0009 Ze status=0009 08:36:44 Check angles 08:36:44 SkyScan query 08:36:45 SkyScan query done: ret=0 az=54.93<-3662 ze=115.32<-4312 Statuses=0009 0009 08:36:45 Msec=1500 True Az=54.93 Ze=115.32 Az status=0009 Ze status=0009 08:36:45 Check angles 08:36:45 SkyScan query 08:36:45 SkyScan query done: ret=0 az=40.86<-2724 ze=94.245<-5717 Statuses=0009 0009 08:36:45 Msec=2250 True Az=40.86 Ze=94.245 Az status=0009 Ze status=0009 08:36:46 Check angles 08:36:46 SkyScan query 08:36:46 SkyScan query done: ret=0 az=40.995<-2733 ze=72.975<-7135 Statuses=0008 0009 08:36:46 Msec=3000 True Az=40.995 Ze=72.975 Az status=0008 Ze status=0009 08:36:46 Check angles 08:36:46 SkyScan query 08:36:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 08:36:47 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 08:36:47 Check angles 08:36:47 SkyScan query 08:36:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:36:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:36:48 Message to Master queued w/err=0: serial=5831 error=0 08:36:53 Received message from Master: op=Filter serial=5832 08:36:53 Color wheel filter change from 0 to 0 08:36:53 FLIGetFilterPos err=0 currentPosition=0 08:36:53 FLIGetStepsRemaining err=0 RemainingSteps=0 08:36:53 Filter is already there-color wheel unchanged 08:36:53 Received message from Master: op=Shutter serial=5833 08:36:53 Shutter LASER close 08:36:53 Received message from Camera: op=State serial=5835 08:36:53 GetSingleValue result=40 Value=cccccccc 08:36:53 SkyScan query 08:36:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:36:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:54 Parameters OK 08:36:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:54 Set A/D data flow result=40 08:36:54 Set A/D channel type result=40 08:36:54 Set A/D encoding result=40 08:36:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:54 Set channel filter=0.000000e+000 result=40 08:36:54 Config A/D Result=40 08:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:54 Get A/D filter: -9.255963e+061 result=40 08:36:54 Get A/D value=-858993460 result=40 08:36:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:36:54 Parameters OK 08:36:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:36:54 Set A/D data flow result=40 08:36:54 Set A/D channel type result=40 08:36:54 Set A/D encoding result=40 08:36:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:36:54 Set channel filter=0.000000e+000 result=40 08:36:54 Config A/D Result=40 08:36:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:36:54 Get A/D filter: -9.255963e+061 result=40 08:36:54 Get A/D value=-858993460 result=40 08:36:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:36:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:36:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:36:54 Aux= 08:36:54 Message to Camera, serial 5835 queued 08:37:24 Received message from Master: op=PointingHead serial=5842 08:37:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:37:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:37:25 Point started: ret=0 08:37:25 point_skyscan result=0 08:37:25 Check angles 08:37:25 SkyScan query 08:37:26 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 08:37:26 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 08:37:26 Check angles 08:37:26 SkyScan query 08:37:27 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 08:37:27 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 08:37:27 Check angles 08:37:27 SkyScan query 08:37:28 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 08:37:28 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 08:37:28 Check angles 08:37:28 SkyScan query 08:37:28 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 08:37:28 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 08:37:28 Check angles 08:37:28 SkyScan query 08:37:29 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 08:37:29 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 08:37:29 Check angles 08:37:29 SkyScan query 08:37:30 SkyScan query done: ret=0 az=151.725<-10115 ze=66.495<-7567 Statuses=0009 0008 08:37:30 Msec=3750 True Az=151.725 Ze=66.495 Az status=0009 Ze status=0008 08:37:30 Check angles 08:37:30 SkyScan query 08:37:31 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:37:31 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:37:31 Message to Master queued w/err=0: serial=5842 error=0 08:37:36 Received message from Master: op=Filter serial=5843 08:37:36 Color wheel filter change from 0 to 0 08:37:36 FLIGetFilterPos err=0 currentPosition=0 08:37:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:37:36 Filter is already there-color wheel unchanged 08:37:36 Received message from Master: op=Shutter serial=5844 08:37:36 Shutter LASER close 08:37:36 Received message from Camera: op=State serial=5846 08:37:36 GetSingleValue result=40 Value=cccccccc 08:37:36 SkyScan query 08:37:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:37:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:36 Parameters OK 08:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:36 Set A/D data flow result=40 08:37:36 Set A/D channel type result=40 08:37:36 Set A/D encoding result=40 08:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:36 Set channel filter=0.000000e+000 result=40 08:37:36 Config A/D Result=40 08:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:36 Get A/D filter: -9.255963e+061 result=40 08:37:36 Get A/D value=-858993460 result=40 08:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:37:36 Parameters OK 08:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:37:36 Set A/D data flow result=40 08:37:36 Set A/D channel type result=40 08:37:36 Set A/D encoding result=40 08:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:37:36 Set channel filter=0.000000e+000 result=40 08:37:36 Config A/D Result=40 08:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:37:36 Get A/D filter: -9.255963e+061 result=40 08:37:36 Get A/D value=-858993460 result=40 08:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:37:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:37:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:37:36 Aux= 08:37:36 Message to Camera, serial 5846 queued 08:38:07 Received message from Master: op=PointingHead serial=5853 08:38:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:38:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:38:08 Point started: ret=0 08:38:08 point_skyscan result=0 08:38:08 Check angles 08:38:08 SkyScan query 08:38:09 SkyScan query done: ret=0 az=134.625<-8975 ze=36.285<-9581 Statuses=0009 0009 08:38:09 Msec=0 True Az=134.625 Ze=36.285 Az status=0009 Ze status=0009 08:38:09 Check angles 08:38:09 SkyScan query 08:38:10 SkyScan query done: ret=0 az=117.075<-7805 ze=15.345<-10977 Statuses=0009 0009 08:38:10 Msec=750 True Az=117.075 Ze=15.345 Az status=0009 Ze status=0009 08:38:10 Check angles 08:38:10 SkyScan query 08:38:10 SkyScan query done: ret=0 az=99.78<-6652 ze=-5.655<-12377 Statuses=0009 0009 08:38:10 Msec=1500 True Az=99.78 Ze=-5.655 Az status=0009 Ze status=0009 08:38:11 Check angles 08:38:11 SkyScan query 08:38:11 SkyScan query done: ret=0 az=81.915<-5461 ze=-27.015<-13801 Statuses=0009 0009 08:38:11 Msec=2250 True Az=81.915 Ze=-27.015 Az status=0009 Ze status=0009 08:38:11 Check angles 08:38:11 SkyScan query 08:38:12 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.565<-14571 Statuses=0009 0008 08:38:12 Msec=3000 True Az=64.455 Ze=-38.565 Az status=0009 Ze status=0008 08:38:12 Check angles 08:38:12 SkyScan query 08:38:13 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 08:38:13 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 08:38:13 Check angles 08:38:13 SkyScan query 08:38:13 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 08:38:13 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 08:38:13 Message to Master queued w/err=0: serial=5853 error=0 08:38:18 Received message from Master: op=Filter serial=5854 08:38:18 Color wheel filter change from 0 to 0 08:38:18 FLIGetFilterPos err=0 currentPosition=0 08:38:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:38:18 Filter is already there-color wheel unchanged 08:38:19 Received message from Master: op=Shutter serial=5855 08:38:19 Shutter LASER close 08:38:19 Received message from Camera: op=State serial=5857 08:38:19 GetSingleValue result=40 Value=cccccccc 08:38:19 SkyScan query 08:38:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:38:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:19 Parameters OK 08:38:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:19 Set A/D data flow result=40 08:38:19 Set A/D channel type result=40 08:38:19 Set A/D encoding result=40 08:38:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:19 Set channel filter=0.000000e+000 result=40 08:38:19 Config A/D Result=40 08:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:19 Get A/D filter: -9.255963e+061 result=40 08:38:19 Get A/D value=-858993460 result=40 08:38:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:38:19 Parameters OK 08:38:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:38:19 Set A/D data flow result=40 08:38:19 Set A/D channel type result=40 08:38:19 Set A/D encoding result=40 08:38:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:38:19 Set channel filter=0.000000e+000 result=40 08:38:19 Config A/D Result=40 08:38:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:38:19 Get A/D filter: -9.255963e+061 result=40 08:38:19 Get A/D value=-858993460 result=40 08:38:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:38:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:38:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:38:19 Aux= 08:38:19 Message to Camera, serial 5857 queued 08:38:50 Received message from Master: op=PointingHead serial=5864 08:38:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:38:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:38:51 Point started: ret=0 08:38:51 point_skyscan result=0 08:38:51 Check angles 08:38:51 SkyScan query 08:38:52 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.76<-16584 Statuses=0009 0009 08:38:52 Msec=0 True Az=64.23 Ze=-68.76 Az status=0009 Ze status=0009 08:38:52 Check angles 08:38:52 SkyScan query 08:38:53 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.73<-17982 Statuses=0009 0009 08:38:53 Msec=750 True Az=82.095 Ze=-89.73 Az status=0009 Ze status=0009 08:38:53 Check angles 08:38:53 SkyScan query 08:38:53 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.745<-19383 Statuses=0009 0009 08:38:53 Msec=1500 True Az=99.375 Ze=-110.745 Az status=0009 Ze status=0009 08:38:54 Check angles 08:38:54 SkyScan query 08:38:54 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.625<-20775 Statuses=0009 0009 08:38:54 Msec=2250 True Az=116.85 Ze=-131.625 Az status=0009 Ze status=0009 08:38:54 Check angles 08:38:54 SkyScan query 08:38:55 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 08:38:55 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 08:38:55 Check angles 08:38:55 SkyScan query 08:38:56 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:38:56 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:38:56 Message to Master queued w/err=0: serial=5864 error=0 08:39:01 Received message from Master: op=Filter serial=5865 08:39:01 Color wheel filter change from 0 to 0 08:39:01 FLIGetFilterPos err=0 currentPosition=0 08:39:01 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:01 Filter is already there-color wheel unchanged 08:39:01 Received message from Master: op=Shutter serial=5866 08:39:01 Shutter LASER close 08:39:01 Received message from Camera: op=State serial=5868 08:39:01 GetSingleValue result=40 Value=cccccccc 08:39:01 SkyScan query 08:39:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:39:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:01 Parameters OK 08:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:01 Set A/D data flow result=40 08:39:01 Set A/D channel type result=40 08:39:01 Set A/D encoding result=40 08:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:01 Set channel filter=0.000000e+000 result=40 08:39:01 Config A/D Result=40 08:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:01 Get A/D filter: -9.255963e+061 result=40 08:39:01 Get A/D value=-858993460 result=40 08:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:01 Parameters OK 08:39:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:01 Set A/D data flow result=40 08:39:01 Set A/D channel type result=40 08:39:01 Set A/D encoding result=40 08:39:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:01 Set channel filter=0.000000e+000 result=40 08:39:01 Config A/D Result=40 08:39:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:01 Get A/D filter: -9.255963e+061 result=40 08:39:01 Get A/D value=-858993460 result=40 08:39:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:01 Aux= 08:39:01 Message to Camera, serial 5868 queued 08:39:32 Received message from Master: op=PointingHead serial=5875 08:39:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:39:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:39:33 Point started: ret=0 08:39:33 point_skyscan result=0 08:39:33 Check angles 08:39:33 SkyScan query 08:39:34 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.015<-23401 Statuses=0009 0009 08:39:34 Msec=0 True Az=113.025 Ze=-171.015 Az status=0009 Ze status=0009 08:39:34 Check angles 08:39:34 SkyScan query 08:39:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:39:35 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:39:35 Message to Master queued w/err=0: serial=5875 error=0 08:39:40 Received message from Master: op=Filter serial=5876 08:39:40 Color wheel filter change from 0 to 0 08:39:40 FLIGetFilterPos err=0 currentPosition=0 08:39:40 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:40 Filter is already there-color wheel unchanged 08:39:40 Received message from Master: op=Shutter serial=5877 08:39:40 Shutter LASER open 08:39:40 Received message from Camera: op=State serial=5879 08:39:40 GetSingleValue result=40 Value=cccccccc 08:39:40 SkyScan query 08:39:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:39:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:41 Parameters OK 08:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:41 Set A/D data flow result=40 08:39:41 Set A/D channel type result=40 08:39:41 Set A/D encoding result=40 08:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:41 Set channel filter=0.000000e+000 result=40 08:39:41 Config A/D Result=40 08:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:41 Get A/D filter: -9.255963e+061 result=40 08:39:41 Get A/D value=-858993460 result=40 08:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:41 Parameters OK 08:39:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:41 Set A/D data flow result=40 08:39:41 Set A/D channel type result=40 08:39:41 Set A/D encoding result=40 08:39:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:41 Set channel filter=0.000000e+000 result=40 08:39:41 Config A/D Result=40 08:39:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:41 Get A/D filter: -9.255963e+061 result=40 08:39:41 Get A/D value=-858993460 result=40 08:39:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:41 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:41 Aux= 08:39:41 Message to Camera, serial 5879 queued 08:39:43 Received message from Master: op=Shutter serial=5883 08:39:43 Shutter LASER close 08:39:44 Received message from Master: op=PointingHead serial=5887 08:39:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:39:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:39:44 Point started: ret=0 08:39:44 point_skyscan result=0 08:39:45 Check angles 08:39:45 SkyScan query 08:39:45 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.385<-21559 Statuses=0009 0009 08:39:45 Msec=0 True Az=135.855 Ze=-143.385 Az status=0009 Ze status=0009 08:39:45 Check angles 08:39:45 SkyScan query 08:39:46 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.49<-20166 Statuses=0009 0009 08:39:46 Msec=750 True Az=153.255 Ze=-122.49 Az status=0009 Ze status=0009 08:39:46 Check angles 08:39:46 SkyScan query 08:39:47 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.13<-18742 Statuses=0009 0009 08:39:47 Msec=1500 True Az=171.075 Ze=-101.13 Az status=0009 Ze status=0009 08:39:47 Check angles 08:39:47 SkyScan query 08:39:48 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.175<-17345 Statuses=0008 0009 08:39:48 Msec=2250 True Az=176.025 Ze=-80.175 Az status=0008 Ze status=0009 08:39:48 Check angles 08:39:48 SkyScan query 08:39:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 08:39:48 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 08:39:49 Check angles 08:39:49 SkyScan query 08:39:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:39:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:39:49 Message to Master queued w/err=0: serial=5887 error=0 08:39:54 Received message from Master: op=Filter serial=5888 08:39:54 Color wheel filter change from 0 to 0 08:39:54 FLIGetFilterPos err=0 currentPosition=0 08:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:39:54 Filter is already there-color wheel unchanged 08:39:54 Received message from Master: op=Shutter serial=5889 08:39:54 Shutter LASER close 08:39:54 Received message from Camera: op=State serial=5891 08:39:54 GetSingleValue result=40 Value=cccccccc 08:39:54 SkyScan query 08:39:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:55 Parameters OK 08:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:55 Set A/D data flow result=40 08:39:55 Set A/D channel type result=40 08:39:55 Set A/D encoding result=40 08:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:55 Set channel filter=0.000000e+000 result=40 08:39:55 Config A/D Result=40 08:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:55 Get A/D filter: -9.255963e+061 result=40 08:39:55 Get A/D value=-858993460 result=40 08:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:39:55 Parameters OK 08:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:39:55 Set A/D data flow result=40 08:39:55 Set A/D channel type result=40 08:39:55 Set A/D encoding result=40 08:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:39:55 Set channel filter=0.000000e+000 result=40 08:39:55 Config A/D Result=40 08:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:39:55 Get A/D filter: -9.255963e+061 result=40 08:39:55 Get A/D value=-858993460 result=40 08:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:39:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:39:55 Aux= 08:39:55 Message to Camera, serial 5891 queued 08:40:26 Received message from Master: op=PointingHead serial=5898 08:40:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:40:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:40:26 Point started: ret=0 08:40:26 point_skyscan result=0 08:40:27 Check angles 08:40:27 SkyScan query 08:40:28 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.915<-13461 Statuses=0009 0009 08:40:28 Msec=0 True Az=152.97 Ze=-21.915 Az status=0009 Ze status=0009 08:40:28 Check angles 08:40:28 SkyScan query 08:40:28 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.945<-12063 Statuses=0009 0009 08:40:28 Msec=750 True Az=135.42 Ze=-0.945 Az status=0009 Ze status=0009 08:40:28 Check angles 08:40:28 SkyScan query 08:40:29 SkyScan query done: ret=0 az=118.02<-7868 ze=20.01<-10666 Statuses=0009 0009 08:40:29 Msec=1500 True Az=118.02 Ze=20.01 Az status=0009 Ze status=0009 08:40:29 Check angles 08:40:29 SkyScan query 08:40:30 SkyScan query done: ret=0 az=100.62<-6708 ze=40.95<-9270 Statuses=0009 0009 08:40:30 Msec=2250 True Az=100.62 Ze=40.95 Az status=0009 Ze status=0009 08:40:30 Check angles 08:40:30 SkyScan query 08:40:31 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:40:31 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:40:31 Check angles 08:40:31 SkyScan query 08:40:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:40:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:40:31 Message to Master queued w/err=0: serial=5898 error=0 08:40:36 Received message from Master: op=Filter serial=5899 08:40:36 Color wheel filter change from 0 to 0 08:40:36 FLIGetFilterPos err=0 currentPosition=0 08:40:36 FLIGetStepsRemaining err=0 RemainingSteps=0 08:40:36 Filter is already there-color wheel unchanged 08:40:36 Received message from Master: op=Shutter serial=5900 08:40:36 Shutter LASER close 08:40:37 Received message from Camera: op=State serial=5902 08:40:37 GetSingleValue result=40 Value=cccccccc 08:40:37 SkyScan query 08:40:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:37 Parameters OK 08:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:37 Set A/D data flow result=40 08:40:37 Set A/D channel type result=40 08:40:37 Set A/D encoding result=40 08:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:37 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-4 08:40:37] 08:40:37 Config A/D Result=40 08:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:37 Get A/D filter: -9.255963e+061 result=40 08:40:37 Get A/D value=-858993460 result=40 08:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:40:37 Parameters OK 08:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:40:37 Set A/D data flow result=40 08:40:37 Set A/D channel type result=40 08:40:37 Set A/D encoding result=40 08:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:40:37 Set channel filter=0.000000e+000 result=40 08:40:37 Config A/D Result=40 08:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:40:37 Get A/D filter: -9.255963e+061 result=40 08:40:37 Get A/D value=-858993460 result=40 08:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:40:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:40:37 Aux= 08:40:37 Message to Camera, serial 5902 queued 08:41:08 Received message from Master: op=PointingHead serial=5909 08:41:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:41:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:41:08 Point started: ret=0 08:41:08 point_skyscan result=0 08:41:09 Check angles 08:41:09 SkyScan query 08:41:10 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 08:41:10 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 08:41:10 Check angles 08:41:10 SkyScan query 08:41:10 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 08:41:10 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 08:41:11 Check angles 08:41:11 SkyScan query 08:41:11 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 08:41:11 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 08:41:11 Check angles 08:41:11 SkyScan query 08:41:12 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 08:41:12 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 08:41:12 Check angles 08:41:12 SkyScan query 08:41:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 08:41:13 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 08:41:13 Check angles 08:41:13 SkyScan query 08:41:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:41:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:41:13 Message to Master queued w/err=0: serial=5909 error=0 08:41:18 Received message from Master: op=Filter serial=5910 08:41:18 Color wheel filter change from 0 to 0 08:41:18 FLIGetFilterPos err=0 currentPosition=0 08:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 08:41:18 Filter is already there-color wheel unchanged 08:41:19 Received message from Master: op=Shutter serial=5911 08:41:19 Shutter LASER close 08:41:19 Received message from Camera: op=State serial=5913 08:41:19 GetSingleValue result=40 Value=cccccccc 08:41:19 SkyScan query 08:41:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:19 Parameters OK 08:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:19 Set A/D data flow result=40 08:41:19 Set A/D channel type result=40 08:41:19 Set A/D encoding result=40 08:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:19 Set channel filter=0.000000e+000 result=40 08:41:19 Config A/D Result=40 08:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:19 Get A/D filter: -9.255963e+061 result=40 08:41:19 Get A/D value=-858993460 result=40 08:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:41:19 Parameters OK 08:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:41:19 Set A/D data flow result=40 08:41:19 Set A/D channel type result=40 08:41:19 Set A/D encoding result=40 08:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:41:19 Set channel filter=0.000000e+000 result=40 08:41:19 Config A/D Result=40 08:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:41:19 Get A/D filter: -9.255963e+061 result=40 08:41:19 Get A/D value=-858993460 result=40 08:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:41:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:41:19 Aux= 08:41:19 Message to Camera, serial 5913 queued 08:41:50 Received message from Master: op=PointingHead serial=5920 08:41:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:41:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:41:50 Point started: ret=0 08:41:50 point_skyscan result=0 08:41:51 Check angles 08:41:51 SkyScan query 08:41:52 SkyScan query done: ret=0 az=152.985<-10199 ze=8.67<-11422 Statuses=0009 0009 08:41:52 Msec=0 True Az=152.985 Ze=8.67 Az status=0009 Ze status=0009 08:41:52 Check angles 08:41:52 SkyScan query 08:41:52 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.69<-12846 Statuses=0009 0009 08:41:52 Msec=750 True Az=135.15 Ze=-12.69 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:53 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.66<-14244 Statuses=0009 0009 08:41:53 Msec=1500 True Az=117.615 Ze=-33.66 Az status=0009 Ze status=0009 08:41:53 Check angles 08:41:53 SkyScan query 08:41:54 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.54<-15436 Statuses=0009 0009 08:41:54 Msec=2250 True Az=100.23 Ze=-51.54 Az status=0009 Ze status=0009 08:41:54 Check angles 08:41:54 SkyScan query 08:41:55 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 08:41:55 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 08:41:55 Check angles 08:41:55 SkyScan query 08:41:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:41:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:41:55 Message to Master queued w/err=0: serial=5920 error=0 08:42:00 Received message from Master: op=Filter serial=5921 08:42:00 Color wheel filter change from 0 to 0 08:42:00 FLIGetFilterPos err=0 currentPosition=0 08:42:00 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:00 Filter is already there-color wheel unchanged 08:42:01 Received message from Master: op=Shutter serial=5922 08:42:01 Shutter LASER close 08:42:01 Received message from Camera: op=State serial=5924 08:42:01 GetSingleValue result=40 Value=cccccccc 08:42:01 SkyScan query 08:42:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:42:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:01 Parameters OK 08:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:01 Set A/D data flow result=40 08:42:01 Set A/D channel type result=40 08:42:01 Set A/D encoding result=40 08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:01 Set channel filter=0.000000e+000 result=40 08:42:01 Config A/D Result=40 08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:01 Get A/D filter: -9.255963e+061 result=40 08:42:01 Get A/D value=-858993460 result=40 08:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:01 Parameters OK 08:42:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:01 Set A/D data flow result=40 08:42:01 Set A/D channel type result=40 08:42:01 Set A/D encoding result=40 08:42:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:01 Set channel filter=0.000000e+000 result=40 08:42:01 Config A/D Result=40 08:42:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:01 Get A/D filter: -9.255963e+061 result=40 08:42:01 Get A/D value=-858993460 result=40 08:42:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:01 Aux= 08:42:01 Message to Camera, serial 5924 queued 08:42:32 Received message from Master: op=PointingHead serial=5931 08:42:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:42:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:42:32 Point started: ret=0 08:42:32 point_skyscan result=0 08:42:33 Check angles 08:42:33 SkyScan query 08:42:34 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.045<-17403 Statuses=0009 0009 08:42:34 Msec=0 True Az=108.78 Ze=-81.045 Az status=0009 Ze status=0009 08:42:34 Check angles 08:42:34 SkyScan query 08:42:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.42<-18828 Statuses=0008 0009 08:42:35 Msec=750 True Az=113.01 Ze=-102.42 Az status=0008 Ze status=0009 08:42:35 Check angles 08:42:35 SkyScan query 08:42:35 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.795<-20253 Statuses=0008 0009 08:42:35 Msec=1500 True Az=113.01 Ze=-123.795 Az status=0008 Ze status=0009 08:42:35 Check angles 08:42:35 SkyScan query 08:42:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.75<-21650 Statuses=0008 0009 08:42:36 Msec=2250 True Az=112.995 Ze=-144.75 Az status=0008 Ze status=0009 08:42:36 Check angles 08:42:36 SkyScan query 08:42:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 08:42:37 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 08:42:37 Check angles 08:42:37 SkyScan query 08:42:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:42:38 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:42:38 Message to Master queued w/err=0: serial=5931 error=0 08:42:43 Received message from Master: op=Filter serial=5932 08:42:43 Color wheel filter change from 0 to 0 08:42:43 FLIGetFilterPos err=0 currentPosition=0 08:42:43 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:43 Filter is already there-color wheel unchanged 08:42:43 Received message from Master: op=Shutter serial=5933 08:42:43 Shutter LASER open 08:42:43 Received message from Camera: op=State serial=5935 08:42:43 GetSingleValue result=40 Value=cccccccc 08:42:43 SkyScan query 08:42:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:42:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:43 Parameters OK 08:42:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:43 Set A/D data flow result=40 08:42:43 Set A/D channel type result=40 08:42:43 Set A/D encoding result=40 08:42:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:43 Set channel filter=0.000000e+000 result=40 08:42:43 Config A/D Result=40 08:42:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:43 Get A/D filter: -9.255963e+061 result=40 08:42:43 Get A/D value=-858993460 result=40 08:42:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:43 Parameters OK 08:42:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:43 Set A/D data flow result=40 08:42:43 Set A/D channel type result=40 08:42:43 Set A/D encoding result=40 08:42:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:43 Set channel filter=0.000000e+000 result=40 08:42:43 Config A/D Result=40 08:42:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:43 Get A/D filter: -9.255963e+061 result=40 08:42:43 Get A/D value=-858993460 result=40 08:42:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:43 Aux= 08:42:43 Message to Camera, serial 5935 queued 08:42:46 Received message from Master: op=Shutter serial=5939 08:42:46 Shutter LASER close 08:42:46 Received message from Master: op=PointingHead serial=5943 08:42:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:42:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:42:47 Point started: ret=0 08:42:47 point_skyscan result=0 08:42:47 Check angles 08:42:47 SkyScan query 08:42:48 SkyScan query done: ret=0 az=89.925<-5995 ze=157.26<-1516 Statuses=0009 0009 08:42:48 Msec=0 True Az=89.925 Ze=157.26 Az status=0009 Ze status=0009 08:42:48 Check angles 08:42:48 SkyScan query 08:42:49 SkyScan query done: ret=0 az=72.45<-4830 ze=136.305<-2913 Statuses=0009 0009 08:42:49 Msec=750 True Az=72.45 Ze=136.305 Az status=0009 Ze status=0009 08:42:49 Check angles 08:42:49 SkyScan query 08:42:50 SkyScan query done: ret=0 az=54.975<-3665 ze=115.35<-4310 Statuses=0009 0009 08:42:50 Msec=1500 True Az=54.975 Ze=115.35 Az status=0009 Ze status=0009 08:42:50 Check angles 08:42:50 SkyScan query 08:42:50 SkyScan query done: ret=0 az=40.86<-2724 ze=93.96<-5736 Statuses=0009 0009 08:42:50 Msec=2250 True Az=40.86 Ze=93.96 Az status=0009 Ze status=0009 08:42:50 Check angles 08:42:50 SkyScan query 08:42:51 SkyScan query done: ret=0 az=41.01<-2734 ze=73.02<-7132 Statuses=0008 0009 08:42:51 Msec=3000 True Az=41.01 Ze=73.02 Az status=0008 Ze status=0009 08:42:51 Check angles 08:42:51 SkyScan query 08:42:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 08:42:52 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 08:42:52 Check angles 08:42:52 SkyScan query 08:42:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:42:53 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:42:53 Message to Master queued w/err=0: serial=5943 error=0 08:42:58 Received message from Master: op=Filter serial=5944 08:42:58 Color wheel filter change from 0 to 0 08:42:58 FLIGetFilterPos err=0 currentPosition=0 08:42:58 FLIGetStepsRemaining err=0 RemainingSteps=0 08:42:58 Filter is already there-color wheel unchanged 08:42:58 Received message from Master: op=Shutter serial=5945 08:42:58 Shutter LASER close 08:42:58 Received message from Camera: op=State serial=5947 08:42:58 GetSingleValue result=40 Value=cccccccc 08:42:58 SkyScan query 08:42:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:42:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:58 Parameters OK 08:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:58 Set A/D data flow result=40 08:42:58 Set A/D channel type result=40 08:42:58 Set A/D encoding result=40 08:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:58 Set channel filter=0.000000e+000 result=40 08:42:58 Config A/D Result=40 08:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:58 Get A/D filter: -9.255963e+061 result=40 08:42:58 Get A/D value=-858993460 result=40 08:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:42:58 Parameters OK 08:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:42:58 Set A/D data flow result=40 08:42:58 Set A/D channel type result=40 08:42:58 Set A/D encoding result=40 08:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:42:58 Set channel filter=0.000000e+000 result=40 08:42:58 Config A/D Result=40 08:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:42:58 Get A/D filter: -9.255963e+061 result=40 08:42:58 Get A/D value=-858993460 result=40 08:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:42:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:42:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:42:58 Aux= 08:42:58 Message to Camera, serial 5947 queued 08:43:29 Received message from Master: op=PointingHead serial=5954 08:43:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:43:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:43:30 Point started: ret=0 08:43:30 point_skyscan result=0 08:43:30 Check angles 08:43:30 SkyScan query 08:43:31 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 08:43:31 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 08:43:31 Check angles 08:43:31 SkyScan query 08:43:32 SkyScan query done: ret=0 az=82.365<-5491 ze=66.495<-7567 Statuses=0009 0008 08:43:32 Msec=750 True Az=82.365 Ze=66.495 Az status=0009 Ze status=0008 08:43:32 Check angles 08:43:32 SkyScan query 08:43:33 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 08:43:33 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 08:43:33 Check angles 08:43:33 SkyScan query 08:43:33 SkyScan query done: ret=0 az=117.075<-7805 ze=66.495<-7567 Statuses=0009 0008 08:43:33 Msec=2250 True Az=117.075 Ze=66.495 Az status=0009 Ze status=0008 08:43:33 Check angles 08:43:33 SkyScan query 08:43:34 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 08:43:34 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 08:43:34 Check angles 08:43:34 SkyScan query 08:43:35 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 08:43:35 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 08:43:35 Check angles 08:43:35 SkyScan query 08:43:36 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 08:43:36 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 08:43:36 Message to Master queued w/err=0: serial=5954 error=0 08:43:41 Received message from Master: op=Filter serial=5955 08:43:41 Color wheel filter change from 0 to 0 08:43:41 FLIGetFilterPos err=0 currentPosition=0 08:43:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:43:41 Filter is already there-color wheel unchanged 08:43:41 Received message from Master: op=Shutter serial=5956 08:43:41 Shutter LASER close 08:43:41 Received message from Camera: op=State serial=5958 08:43:41 GetSingleValue result=40 Value=cccccccc 08:43:41 SkyScan query 08:43:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:43:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:41 Parameters OK 08:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:41 Set A/D data flow result=40 08:43:41 Set A/D channel type result=40 08:43:41 Set A/D encoding result=40 08:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:41 Set channel filter=0.000000e+000 result=40 08:43:41 Config A/D Result=40 08:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:41 Get A/D filter: -9.255963e+061 result=40 08:43:41 Get A/D value=-858993460 result=40 08:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:43:41 Parameters OK 08:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:43:41 Set A/D data flow result=40 08:43:41 Set A/D channel type result=40 08:43:41 Set A/D encoding result=40 08:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:43:41 Set channel filter=0.000000e+000 result=40 08:43:41 Config A/D Result=40 08:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:43:41 Get A/D filter: -9.255963e+061 result=40 08:43:41 Get A/D value=-858993460 result=40 08:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:43:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:43:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:43:41 Aux= 08:43:41 Message to Camera, serial 5958 queued 08:44:12 Received message from Master: op=PointingHead serial=5965 08:44:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:44:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:44:13 Point started: ret=0 08:44:13 point_skyscan result=0 08:44:13 Check angles 08:44:13 SkyScan query 08:44:14 SkyScan query done: ret=0 az=135<-9000 ze=36.63<-9558 Statuses=0009 0009 08:44:14 Msec=0 True Az=135 Ze=36.63 Az status=0009 Ze status=0009 08:44:14 Check angles 08:44:14 SkyScan query 08:44:15 SkyScan query done: ret=0 az=117.435<-7829 ze=15.66<-10956 Statuses=0009 0009 08:44:15 Msec=750 True Az=117.435 Ze=15.66 Az status=0009 Ze status=0009 08:44:15 Check angles 08:44:15 SkyScan query 08:44:15 SkyScan query done: ret=0 az=99.75<-6650 ze=-5.73<-12382 Statuses=0009 0009 08:44:15 Msec=1500 True Az=99.75 Ze=-5.73 Az status=0009 Ze status=0009 08:44:16 Check angles 08:44:16 SkyScan query 08:44:16 SkyScan query done: ret=0 az=81.9<-5460 ze=-27.105<-13807 Statuses=0009 0009 08:44:16 Msec=2250 True Az=81.9 Ze=-27.105 Az status=0009 Ze status=0009 08:44:16 Check angles 08:44:16 SkyScan query 08:44:17 SkyScan query done: ret=0 az=64.425<-4295 ze=-38.565<-14571 Statuses=0009 0008 08:44:17 Msec=3000 True Az=64.425 Ze=-38.565 Az status=0009 Ze status=0008 08:44:17 Check angles 08:44:17 SkyScan query 08:44:18 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 08:44:18 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 08:44:18 Check angles 08:44:18 SkyScan query 08:44:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:44:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:44:18 Message to Master queued w/err=0: serial=5965 error=0 08:44:23 Received message from Master: op=Filter serial=5966 08:44:23 Color wheel filter change from 0 to 0 08:44:23 FLIGetFilterPos err=0 currentPosition=0 08:44:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:44:23 Filter is already there-color wheel unchanged 08:44:24 Received message from Master: op=Shutter serial=5967 08:44:24 Shutter LASER close 08:44:24 Received message from Camera: op=State serial=5969 08:44:24 GetSingleValue result=40 Value=cccccccc 08:44:24 SkyScan query 08:44:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:44:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:24 Parameters OK 08:44:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:24 Set A/D data flow result=40 08:44:24 Set A/D channel type result=40 08:44:24 Set A/D encoding result=40 08:44:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:24 Set channel filter=0.000000e+000 result=40 08:44:24 Config A/D Result=40 08:44:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:24 Get A/D filter: -9.255963e+061 result=40 08:44:24 Get A/D value=-858993460 result=40 08:44:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:44:24 Parameters OK 08:44:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:44:24 Set A/D data flow result=40 08:44:24 Set A/D channel type result=40 08:44:24 Set A/D encoding result=40 08:44:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:44:24 Set channel filter=0.000000e+000 result=40 08:44:24 Config A/D Result=40 08:44:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:44:24 Get A/D filter: -9.255963e+061 result=40 08:44:24 Get A/D value=-858993460 result=40 08:44:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:44:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:44:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:44:24 Aux= 08:44:24 Message to Camera, serial 5969 queued 08:44:55 Received message from Master: op=PointingHead serial=5976 08:44:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:44:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:44:55 Point started: ret=0 08:44:55 point_skyscan result=0 08:44:56 Check angles 08:44:56 SkyScan query 08:44:57 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.775<-16585 Statuses=0009 0009 08:44:57 Msec=0 True Az=64.245 Ze=-68.775 Az status=0009 Ze status=0009 08:44:57 Check angles 08:44:57 SkyScan query 08:44:58 SkyScan query done: ret=0 az=81.99<-5466 ze=-89.73<-17982 Statuses=0009 0009 08:44:58 Msec=750 True Az=81.99 Ze=-89.73 Az status=0009 Ze status=0009 08:44:58 Check angles 08:44:58 SkyScan query 08:44:58 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.67<-19378 Statuses=0009 0009 08:44:58 Msec=1500 True Az=99.465 Ze=-110.67 Az status=0009 Ze status=0009 08:44:58 Check angles 08:44:58 SkyScan query 08:44:59 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.64<-20776 Statuses=0009 0009 08:44:59 Msec=2250 True Az=116.82 Ze=-131.64 Az status=0009 Ze status=0009 08:44:59 Check angles 08:44:59 SkyScan query 08:45:00 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 08:45:00 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 08:45:00 Check angles 08:45:00 SkyScan query 08:45:01 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:45:01 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:45:01 Message to Master queued w/err=0: serial=5976 error=0 08:45:06 Received message from Master: op=Filter serial=5977 08:45:06 Color wheel filter change from 0 to 0 08:45:06 FLIGetFilterPos err=0 currentPosition=0 08:45:06 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:06 Filter is already there-color wheel unchanged 08:45:06 Received message from Master: op=Shutter serial=5978 08:45:06 Shutter LASER close 08:45:06 Received message from Camera: op=State serial=5980 08:45:06 GetSingleValue result=40 Value=cccccccc 08:45:06 SkyScan query 08:45:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:45:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:06 Parameters OK 08:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:06 Set A/D data flow result=40 08:45:06 Set A/D channel type result=40 08:45:06 Set A/D encoding result=40 08:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:06 Set channel filter=0.000000e+000 result=40 08:45:06 Config A/D Result=40 08:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:06 Get A/D filter: -9.255963e+061 result=40 08:45:06 Get A/D value=-858993460 result=40 08:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:06 Parameters OK 08:45:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:06 Set A/D data flow result=40 08:45:06 Set A/D channel type result=40 08:45:06 Set A/D encoding result=40 08:45:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:06 Set channel filter=0.000000e+000 result=40 08:45:06 Config A/D Result=40 08:45:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:06 Get A/D filter: -9.255963e+061 result=40 08:45:06 Get A/D value=-858993460 result=40 08:45:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:06 Aux= 08:45:06 Message to Camera, serial 5980 queued 08:45:37 Received message from Master: op=PointingHead serial=5987 08:45:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:45:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:45:38 Point started: ret=0 08:45:38 point_skyscan result=0 08:45:38 Check angles 08:45:38 SkyScan query 08:45:39 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.88<-23392 Statuses=0009 0009 08:45:39 Msec=0 True Az=113.025 Ze=-170.88 Az status=0009 Ze status=0009 08:45:39 Check angles 08:45:39 SkyScan query 08:45:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:45:40 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:45:40 Message to Master queued w/err=0: serial=5987 error=0 08:45:45 Received message from Master: op=Filter serial=5988 08:45:45 Color wheel filter change from 0 to 0 08:45:45 FLIGetFilterPos err=0 currentPosition=0 08:45:45 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:45 Filter is already there-color wheel unchanged 08:45:45 Received message from Master: op=Shutter serial=5989 08:45:45 Shutter LASER open 08:45:45 Received message from Camera: op=State serial=5991 08:45:45 GetSingleValue result=40 Value=cccccccc 08:45:45 SkyScan query 08:45:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:45:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:46 Parameters OK 08:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:46 Set A/D data flow result=40 08:45:46 Set A/D channel type result=40 08:45:46 Set A/D encoding result=40 08:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:46 Set channel filter=0.000000e+000 result=40 08:45:46 Config A/D Result=40 08:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:46 Get A/D filter: -9.255963e+061 result=40 08:45:46 Get A/D value=-858993460 result=40 08:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:45:46 Parameters OK 08:45:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:45:46 Set A/D data flow result=40 08:45:46 Set A/D channel type result=40 08:45:46 Set A/D encoding result=40 08:45:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:45:46 Set channel filter=0.000000e+000 result=40 08:45:46 Config A/D Result=40 08:45:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:45:46 Get A/D filter: -9.255963e+061 result=40 08:45:46 Get A/D value=-858993460 result=40 08:45:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:45:46 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:45:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:45:46 Aux= 08:45:46 Message to Camera, serial 5991 queued 08:45:48 Received message from Master: op=Shutter serial=5995 08:45:48 Shutter LASER close 08:45:49 Received message from Master: op=PointingHead serial=5999 08:45:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:45:49 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:45:49 Point started: ret=0 08:45:49 point_skyscan result=0 08:45:50 Check angles 08:45:50 SkyScan query 08:45:50 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.01<-21534 Statuses=0009 0009 08:45:50 Msec=0 True Az=136.17 Ze=-143.01 Az status=0009 Ze status=0009 08:45:50 Check angles 08:45:50 SkyScan query 08:45:51 SkyScan query done: ret=0 az=154.05<-10270 ze=-121.62<-20108 Statuses=0009 0009 08:45:51 Msec=750 True Az=154.05 Ze=-121.62 Az status=0009 Ze status=0009 08:45:51 Check angles 08:45:51 SkyScan query 08:45:52 SkyScan query done: ret=0 az=171.435<-11429 ze=-100.665<-18711 Statuses=0009 0009 08:45:52 Msec=1500 True Az=171.435 Ze=-100.665 Az status=0009 Ze status=0009 08:45:52 Check angles 08:45:52 SkyScan query 08:45:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.71<-17314 Statuses=0008 0009 08:45:52 Msec=2250 True Az=176.01 Ze=-79.71 Az status=0008 Ze status=0009 08:45:53 Check angles 08:45:53 SkyScan query 08:45:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.755<-15917 Statuses=0008 0009 08:45:53 Msec=3000 True Az=175.995 Ze=-58.755 Az status=0008 Ze status=0009 08:45:53 Check angles 08:45:53 SkyScan query 08:45:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:45:54 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:45:54 Message to Master queued w/err=0: serial=5999 error=0 08:45:59 Received message from Master: op=Filter serial=6000 08:45:59 Color wheel filter change from 0 to 0 08:45:59 FLIGetFilterPos err=0 currentPosition=0 08:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 08:45:59 Filter is already there-color wheel unchanged 08:45:59 Received message from Master: op=Shutter serial=6001 08:45:59 Shutter LASER close 08:45:59 Received message from Camera: op=State serial=6003 08:45:59 GetSingleValue result=40 Value=cccccccc 08:45:59 SkyScan query 08:46:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:46:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:00 Parameters OK 08:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:00 Set A/D data flow result=40 08:46:00 Set A/D channel type result=40 08:46:00 Set A/D encoding result=40 08:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:00 Set channel filter=0.000000e+000 result=40 08:46:00 Config A/D Result=40 08:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:00 Get A/D filter: -9.255963e+061 result=40 08:46:00 Get A/D value=-858993460 result=40 08:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:00 Parameters OK 08:46:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:00 Set A/D data flow result=40 08:46:00 Set A/D channel type result=40 08:46:00 Set A/D encoding result=40 08:46:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:00 Set channel filter=0.000000e+000 result=40 08:46:00 Config A/D Result=40 08:46:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:00 Get A/D filter: -9.255963e+061 result=40 08:46:00 Get A/D value=-858993460 result=40 08:46:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:00 Aux= 08:46:00 Message to Camera, serial 6003 queued 08:46:31 Received message from Master: op=PointingHead serial=6010 08:46:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:46:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:46:31 Point started: ret=0 08:46:31 point_skyscan result=0 08:46:32 Check angles 08:46:32 SkyScan query 08:46:32 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.33<-13422 Statuses=0009 0009 08:46:32 Msec=0 True Az=152.685 Ze=-21.33 Az status=0009 Ze status=0009 08:46:33 Check angles 08:46:33 SkyScan query 08:46:33 SkyScan query done: ret=0 az=135.18<-9012 ze=-0.36<-12024 Statuses=0009 0009 08:46:33 Msec=750 True Az=135.18 Ze=-0.36 Az status=0009 Ze status=0009 08:46:33 Check angles 08:46:33 SkyScan query 08:46:34 SkyScan query done: ret=0 az=117.63<-7842 ze=20.595<-10627 Statuses=0009 0009 08:46:34 Msec=1500 True Az=117.63 Ze=20.595 Az status=0009 Ze status=0009 08:46:34 Check angles 08:46:34 SkyScan query 08:46:35 SkyScan query done: ret=0 az=100.245<-6683 ze=41.55<-9230 Statuses=0009 0009 08:46:35 Msec=2250 True Az=100.245 Ze=41.55 Az status=0009 Ze status=0009 08:46:35 Check angles 08:46:35 SkyScan query 08:46:35 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 08:46:35 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 08:46:36 Check angles 08:46:36 SkyScan query 08:46:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:46:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:46:36 Message to Master queued w/err=0: serial=6010 error=0 08:46:41 Received message from Master: op=Filter serial=6011 08:46:41 Color wheel filter change from 0 to 0 08:46:41 FLIGetFilterPos err=0 currentPosition=0 08:46:41 FLIGetStepsRemaining err=0 RemainingSteps=0 08:46:41 Filter is already there-color wheel unchanged 08:46:41 Received message from Master: op=Shutter serial=6012 08:46:41 Shutter LASER close 08:46:41 Received message from Camera: op=State serial=6014 08:46:41 GetSingleValue result=40 Value=cccccccc 08:46:41 SkyScan query 08:46:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:46:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:42 Parameters OK 08:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:42 Set A/D data flow result=40 08:46:42 Set A/D channel type result=40 08:46:42 Set A/D encoding result=40 08:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:42 Set channel filter=0.000000e+000 result=40 08:46:42 Config A/D Result=40 08:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:42 Get A/D filter: -9.255963e+061 result=40 08:46:42 Get A/D value=-858993460 result=40 08:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:46:42 Parameters OK 08:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:46:42 Set A/D data flow result=40 08:46:42 Set A/D channel type result=40 08:46:42 Set A/D encoding result=40 08:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:46:42 Set channel filter=0.000000e+000 result=40 08:46:42 Config A/D Result=40 08:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:46:42 Get A/D filter: -9.255963e+061 result=40 08:46:42 Get A/D value=-858993460 result=40 08:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:46:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:46:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:46:42 Aux= 08:46:42 Message to Camera, serial 6014 queued 08:47:13 Received message from Master: op=PointingHead serial=6021 08:47:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:47:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:47:13 Point started: ret=0 08:47:13 point_skyscan result=0 08:47:14 Check angles 08:47:14 SkyScan query 08:47:14 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 08:47:14 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 08:47:15 Check angles 08:47:15 SkyScan query 08:47:15 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 08:47:15 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 08:47:15 Check angles 08:47:15 SkyScan query 08:47:16 SkyScan query done: ret=0 az=144.615<-9641 ze=38.505<-9433 Statuses=0009 0008 08:47:16 Msec=1500 True Az=144.615 Ze=38.505 Az status=0009 Ze status=0008 08:47:16 Check angles 08:47:16 SkyScan query 08:47:17 SkyScan query done: ret=0 az=162.405<-10827 ze=38.505<-9433 Statuses=0009 0008 08:47:17 Msec=2250 True Az=162.405 Ze=38.505 Az status=0009 Ze status=0008 08:47:17 Check angles 08:47:17 SkyScan query 08:47:18 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:47:18 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:47:18 Check angles 08:47:18 SkyScan query 08:47:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:47:18 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 08:47:18 Message to Master queued w/err=0: serial=6021 error=0 08:47:23 Received message from Master: op=Filter serial=6022 08:47:23 Color wheel filter change from 0 to 0 08:47:23 FLIGetFilterPos err=0 currentPosition=0 08:47:23 FLIGetStepsRemaining err=0 RemainingSteps=0 08:47:23 Filter is already there-color wheel unchanged 08:47:23 Received message from Master: op=Shutter serial=6023 08:47:23 Shutter LASER close 08:47:23 Received message from Camera: op=State serial=6025 08:47:23 GetSingleValue result=40 Value=cccccccc 08:47:23 SkyScan query 08:47:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:24 Parameters OK 08:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:24 Set A/D data flow result=40 08:47:24 Set A/D channel type result=40 08:47:24 Set A/D encoding result=40 08:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:24 Set channel filter=0.000000e+000 result=40 08:47:24 Config A/D Result=40 08:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:24 Get A/D filter: -9.255963e+061 result=40 08:47:24 Get A/D value=-858993460 result=40 08:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:47:24 Parameters OK 08:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:47:24 Set A/D data flow result=40 08:47:24 Set A/D channel type result=40 08:47:24 Set A/D encoding result=40 08:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:47:24 Set channel filter=0.000000e+000 result=40 08:47:24 Config A/D Result=40 08:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:47:24 Get A/D filter: -9.255963e+061 result=40 08:47:24 Get A/D value=-858993460 result=40 08:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:47:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:47:24 Aux= 08:47:24 Message to Camera, serial 6025 queued 08:47:55 Received message from Master: op=PointingHead serial=6032 08:47:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:47:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:47:55 Point started: ret=0 08:47:55 point_skyscan result=0 08:47:56 Check angles 08:47:56 SkyScan query 08:47:57 SkyScan query done: ret=0 az=152.955<-10197 ze=8.865<-11409 Statuses=0009 0009 08:47:57 Msec=0 True Az=152.955 Ze=8.865 Az status=0009 Ze status=0009 08:47:57 Check angles 08:47:57 SkyScan query 08:47:57 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.075<-12805 Statuses=0009 0009 08:47:57 Msec=750 True Az=135.615 Ze=-12.075 Az status=0009 Ze status=0009 08:47:57 Check angles 08:47:57 SkyScan query 08:47:58 SkyScan query done: ret=0 az=118.155<-7877 ze=-33.045<-14203 Statuses=0009 0009 08:47:58 Msec=1500 True Az=118.155 Ze=-33.045 Az status=0009 Ze status=0009 08:47:58 Check angles 08:47:58 SkyScan query 08:47:59 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.51<-15434 Statuses=0009 0009 08:47:59 Msec=2250 True Az=100.725 Ze=-51.51 Az status=0009 Ze status=0009 08:47:59 Check angles 08:47:59 SkyScan query 08:48:00 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 08:48:00 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 08:48:00 Check angles 08:48:00 SkyScan query 08:48:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:48:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:48:00 Message to Master queued w/err=0: serial=6032 error=0 08:48:05 Received message from Master: op=Filter serial=6033 08:48:05 Color wheel filter change from 0 to 0 08:48:05 FLIGetFilterPos err=0 currentPosition=0 08:48:05 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:05 Filter is already there-color wheel unchanged 08:48:05 Received message from Master: op=Shutter serial=6034 08:48:05 Shutter LASER close 08:48:06 Received message from Camera: op=State serial=6036 08:48:06 GetSingleValue result=40 Value=cccccccc 08:48:06 SkyScan query 08:48:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:48:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:06 Parameters OK 08:48:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:06 Set A/D data flow result=40 08:48:06 Set A/D channel type result=40 08:48:06 Set A/D encoding result=40 08:48:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:06 Set channel filter=0.000000e+000 result=40 08:48:06 Config A/D Result=40 08:48:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:06 Get A/D filter: -9.255963e+061 result=40 08:48:06 Get A/D value=-858993460 result=40 08:48:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:06 Parameters OK 08:48:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:06 Set A/D data flow result=40 08:48:06 Set A/D channel type result=40 08:48:06 Set A/D encoding result=40 08:48:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:06 Set channel filter=0.000000e+000 result=40 08:48:06 Config A/D Result=40 08:48:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:06 Get A/D filter: -9.255963e+061 result=40 08:48:06 Get A/D value=-858993460 result=40 08:48:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:06 Aux= 08:48:06 Message to Camera, serial 6036 queued 08:48:37 Received message from Master: op=PointingHead serial=6043 08:48:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:48:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:48:37 Point started: ret=0 08:48:37 point_skyscan result=0 08:48:38 Check angles 08:48:38 SkyScan query 08:48:39 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.54<-17436 Statuses=0009 0009 08:48:39 Msec=0 True Az=109.2 Ze=-81.54 Az status=0009 Ze status=0009 08:48:39 Check angles 08:48:39 SkyScan query 08:48:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.495<-18833 Statuses=0008 0009 08:48:39 Msec=750 True Az=113.01 Ze=-102.495 Az status=0008 Ze status=0009 08:48:40 Check angles 08:48:40 SkyScan query 08:48:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 08:48:40 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 08:48:40 Check angles 08:48:40 SkyScan query 08:48:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 08:48:41 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 08:48:41 Check angles 08:48:41 SkyScan query 08:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 08:48:42 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 08:48:42 Check angles 08:48:42 SkyScan query 08:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:48:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:48:42 Message to Master queued w/err=0: serial=6043 error=0 08:48:47 Received message from Master: op=Filter serial=6044 08:48:47 Color wheel filter change from 0 to 0 08:48:47 FLIGetFilterPos err=0 currentPosition=0 08:48:47 FLIGetStepsRemaining err=0 RemainingSteps=0 08:48:47 Filter is already there-color wheel unchanged 08:48:48 Received message from Master: op=Shutter serial=6045 08:48:48 Shutter LASER open 08:48:48 Received message from Camera: op=State serial=6047 08:48:48 GetSingleValue result=40 Value=cccccccc 08:48:48 SkyScan query 08:48:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:48:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:48 Parameters OK 08:48:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:48 Set A/D data flow result=40 08:48:48 Set A/D channel type result=40 08:48:48 Set A/D encoding result=40 08:48:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:48 Set channel filter=0.000000e+000 result=40 08:48:48 Config A/D Result=40 08:48:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:48 Get A/D filter: -9.255963e+061 result=40 08:48:48 Get A/D value=-858993460 result=40 08:48:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:48:48 Parameters OK 08:48:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:48:48 Set A/D data flow result=40 08:48:48 Set A/D channel type result=40 08:48:48 Set A/D encoding result=40 08:48:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:48:48 Set channel filter=0.000000e+000 result=40 08:48:48 Config A/D Result=40 08:48:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:48:48 Get A/D filter: -9.255963e+061 result=40 08:48:48 Get A/D value=-858993460 result=40 08:48:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:48:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:48:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:48:48 Aux= 08:48:48 Message to Camera, serial 6047 queued 08:48:51 Received message from Master: op=Shutter serial=6051 08:48:51 Shutter LASER close 08:48:51 Received message from Master: op=PointingHead serial=6055 08:48:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:48:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:48:52 Point started: ret=0 08:48:52 point_skyscan result=0 08:48:52 Check angles 08:48:52 SkyScan query 08:48:53 SkyScan query done: ret=0 az=89.955<-5997 ze=157.275<-1515 Statuses=0009 0009 08:48:53 Msec=0 True Az=89.955 Ze=157.275 Az status=0009 Ze status=0009 08:48:53 Check angles 08:48:53 SkyScan query 08:48:54 SkyScan query done: ret=0 az=72.06<-4804 ze=135.87<-2942 Statuses=0009 0009 08:48:54 Msec=750 True Az=72.06 Ze=135.87 Az status=0009 Ze status=0009 08:48:54 Check angles 08:48:54 SkyScan query 08:48:54 SkyScan query done: ret=0 az=54.66<-3644 ze=114.93<-4338 Statuses=0009 0009 08:48:54 Msec=1500 True Az=54.66 Ze=114.93 Az status=0009 Ze status=0009 08:48:55 Check angles 08:48:55 SkyScan query 08:48:55 SkyScan query done: ret=0 az=40.98<-2732 ze=93.975<-5735 Statuses=0009 0009 08:48:55 Msec=2250 True Az=40.98 Ze=93.975 Az status=0009 Ze status=0009 08:48:55 Check angles 08:48:55 SkyScan query 08:48:56 SkyScan query done: ret=0 az=40.995<-2733 ze=72.585<-7161 Statuses=0008 0009 08:48:56 Msec=3000 True Az=40.995 Ze=72.585 Az status=0008 Ze status=0009 08:48:56 Check angles 08:48:56 SkyScan query 08:48:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.125<-8525 Statuses=0008 0009 08:48:57 Msec=3750 True Az=40.995 Ze=52.125 Az status=0008 Ze status=0009 08:48:57 Check angles 08:48:57 SkyScan query 08:48:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:48:58 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:48:58 Message to Master queued w/err=0: serial=6055 error=0 08:49:03 Received message from Master: op=Filter serial=6056 08:49:03 Color wheel filter change from 0 to 0 08:49:03 FLIGetFilterPos err=0 currentPosition=0 08:49:03 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:03 Filter is already there-color wheel unchanged 08:49:03 Received message from Master: op=Shutter serial=6057 08:49:03 Shutter LASER close 08:49:03 Received message from Camera: op=State serial=6059 08:49:03 GetSingleValue result=40 Value=cccccccc 08:49:03 SkyScan query 08:49:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:49:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:03 Parameters OK 08:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:03 Set A/D data flow result=40 08:49:03 Set A/D channel type result=40 08:49:03 Set A/D encoding result=40 08:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 [UTC 2018-12-4 08:49:03] 08:49:03 Set channel filter=0.000000e+000 result=40 08:49:04 Config A/D Result=40 08:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:04 Get A/D filter: -9.255963e+061 result=40 08:49:04 Get A/D value=-858993460 result=40 08:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:04 Parameters OK 08:49:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:04 Set A/D data flow result=40 08:49:04 Set A/D channel type result=40 08:49:04 Set A/D encoding result=40 08:49:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:04 Set channel filter=0.000000e+000 result=40 08:49:04 Config A/D Result=40 08:49:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:04 Get A/D filter: -9.255963e+061 result=40 08:49:04 Get A/D value=-858993460 result=40 08:49:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:04 Aux= 08:49:04 Message to Camera, serial 6059 queued 08:49:34 Received message from Master: op=PointingHead serial=6066 08:49:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:49:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:49:35 Point started: ret=0 08:49:35 point_skyscan result=0 08:49:35 Check angles 08:49:35 SkyScan query 08:49:36 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 08:49:36 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 08:49:36 Check angles 08:49:36 SkyScan query 08:49:37 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 08:49:37 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 08:49:37 Check angles 08:49:37 SkyScan query 08:49:37 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 08:49:37 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 08:49:38 Check angles 08:49:38 SkyScan query 08:49:38 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 08:49:38 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 08:49:38 Check angles 08:49:38 SkyScan query 08:49:39 SkyScan query done: ret=0 az=134.655<-8977 ze=66.495<-7567 Statuses=0009 0008 08:49:39 Msec=3000 True Az=134.655 Ze=66.495 Az status=0009 Ze status=0008 08:49:39 Check angles 08:49:39 SkyScan query 08:49:40 SkyScan query done: ret=0 az=152.235<-10149 ze=66.495<-7567 Statuses=0009 0008 08:49:40 Msec=3750 True Az=152.235 Ze=66.495 Az status=0009 Ze status=0008 08:49:40 Check angles 08:49:40 SkyScan query 08:49:41 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:49:41 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:49:41 Message to Master queued w/err=0: serial=6066 error=0 08:49:46 Received message from Master: op=Filter serial=6067 08:49:46 Color wheel filter change from 0 to 0 08:49:46 FLIGetFilterPos err=0 currentPosition=0 08:49:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:49:46 Filter is already there-color wheel unchanged 08:49:46 Received message from Master: op=Shutter serial=6068 08:49:46 Shutter LASER close 08:49:46 Received message from Camera: op=State serial=6070 08:49:46 GetSingleValue result=40 Value=cccccccc 08:49:46 SkyScan query 08:49:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:49:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:46 Parameters OK 08:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:46 Set A/D data flow result=40 08:49:46 Set A/D channel type result=40 08:49:46 Set A/D encoding result=40 08:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:46 Set channel filter=0.000000e+000 result=40 08:49:46 Config A/D Result=40 08:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:46 Get A/D filter: -9.255963e+061 result=40 08:49:46 Get A/D value=-858993460 result=40 08:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:49:46 Parameters OK 08:49:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:49:46 Set A/D data flow result=40 08:49:46 Set A/D channel type result=40 08:49:46 Set A/D encoding result=40 08:49:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:49:46 Set channel filter=0.000000e+000 result=40 08:49:46 Config A/D Result=40 08:49:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:49:46 Get A/D filter: -9.255963e+061 result=40 08:49:46 Get A/D value=-858993460 result=40 08:49:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:49:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:49:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:49:46 Aux= 08:49:46 Message to Camera, serial 6070 queued 08:50:17 Received message from Master: op=PointingHead serial=6077 08:50:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:50:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:50:18 Point started: ret=0 08:50:18 point_skyscan result=0 08:50:18 Check angles 08:50:18 SkyScan query 08:50:19 SkyScan query done: ret=0 az=135.255<-9017 ze=36.99<-9534 Statuses=0009 0009 08:50:19 Msec=0 True Az=135.255 Ze=36.99 Az status=0009 Ze status=0009 08:50:19 Check angles 08:50:19 SkyScan query 08:50:20 SkyScan query done: ret=0 az=117.165<-7811 ze=15.18<-10988 Statuses=0009 0009 08:50:20 Msec=750 True Az=117.165 Ze=15.18 Az status=0009 Ze status=0009 08:50:20 Check angles 08:50:20 SkyScan query 08:50:20 SkyScan query done: ret=0 az=100.02<-6668 ze=-5.355<-12357 Statuses=0009 0009 08:50:20 Msec=1500 True Az=100.02 Ze=-5.355 Az status=0009 Ze status=0009 08:50:21 Check angles 08:50:21 SkyScan query 08:50:21 SkyScan query done: ret=0 az=82.515<-5501 ze=-26.325<-13755 Statuses=0009 0009 08:50:21 Msec=2250 True Az=82.515 Ze=-26.325 Az status=0009 Ze status=0009 08:50:21 Check angles 08:50:21 SkyScan query 08:50:22 SkyScan query done: ret=0 az=65.025<-4335 ze=-38.565<-14571 Statuses=0009 0008 08:50:22 Msec=3000 True Az=65.025 Ze=-38.565 Az status=0009 Ze status=0008 08:50:22 Check angles 08:50:22 SkyScan query 08:50:23 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.535<-14569 Statuses=0009 0008 08:50:23 Msec=3750 True Az=47.61 Ze=-38.535 Az status=0009 Ze status=0008 08:50:23 Check angles 08:50:23 SkyScan query 08:50:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:50:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:50:23 Message to Master queued w/err=0: serial=6077 error=0 08:50:28 Received message from Master: op=Filter serial=6078 08:50:28 Color wheel filter change from 0 to 0 08:50:28 FLIGetFilterPos err=0 currentPosition=0 08:50:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:50:28 Filter is already there-color wheel unchanged 08:50:29 Received message from Master: op=Shutter serial=6079 08:50:29 Shutter LASER close 08:50:29 Received message from Camera: op=State serial=6081 08:50:29 GetSingleValue result=40 Value=cccccccc 08:50:29 SkyScan query 08:50:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:50:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:29 Parameters OK 08:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:29 Set A/D data flow result=40 08:50:29 Set A/D channel type result=40 08:50:29 Set A/D encoding result=40 08:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:29 Set channel filter=0.000000e+000 result=40 08:50:29 Config A/D Result=40 08:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:29 Get A/D filter: -9.255963e+061 result=40 08:50:29 Get A/D value=-858993460 result=40 08:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:50:29 Parameters OK 08:50:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:50:29 Set A/D data flow result=40 08:50:29 Set A/D channel type result=40 08:50:29 Set A/D encoding result=40 08:50:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:50:29 Set channel filter=0.000000e+000 result=40 08:50:29 Config A/D Result=40 08:50:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:50:29 Get A/D filter: -9.255963e+061 result=40 08:50:29 Get A/D value=-858993460 result=40 08:50:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:50:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:50:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:50:29 Aux= 08:50:29 Message to Camera, serial 6081 queued 08:51:00 Received message from Master: op=PointingHead serial=6088 08:51:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:51:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:51:00 Point started: ret=0 08:51:00 point_skyscan result=0 08:51:01 Check angles 08:51:01 SkyScan query 08:51:02 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.565<-16571 Statuses=0009 0009 08:51:02 Msec=0 True Az=64.185 Ze=-68.565 Az status=0009 Ze status=0009 08:51:02 Check angles 08:51:02 SkyScan query 08:51:02 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.55<-17970 Statuses=0009 0009 08:51:02 Msec=750 True Az=81.885 Ze=-89.55 Az status=0009 Ze status=0009 08:51:03 Check angles 08:51:03 SkyScan query 08:51:03 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.505<-19367 Statuses=0009 0009 08:51:03 Msec=1500 True Az=99.375 Ze=-110.505 Az status=0009 Ze status=0009 08:51:03 Check angles 08:51:03 SkyScan query 08:51:04 SkyScan query done: ret=0 az=116.775<-7785 ze=-131.43<-20762 Statuses=0009 0009 08:51:04 Msec=2250 True Az=116.775 Ze=-131.43 Az status=0009 Ze status=0009 08:51:04 Check angles 08:51:04 SkyScan query 08:51:05 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 08:51:05 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 08:51:05 Check angles 08:51:05 SkyScan query 08:51:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:51:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:51:05 Message to Master queued w/err=0: serial=6088 error=0 08:51:10 Received message from Master: op=Filter serial=6089 08:51:10 Color wheel filter change from 0 to 0 08:51:10 FLIGetFilterPos err=0 currentPosition=0 08:51:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:10 Filter is already there-color wheel unchanged 08:51:11 Received message from Master: op=Shutter serial=6090 08:51:11 Shutter LASER close 08:51:11 Received message from Camera: op=State serial=6092 08:51:11 GetSingleValue result=40 Value=cccccccc 08:51:11 SkyScan query 08:51:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:51:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:11 Parameters OK 08:51:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:11 Set A/D data flow result=40 08:51:11 Set A/D channel type result=40 08:51:11 Set A/D encoding result=40 08:51:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:11 Set channel filter=0.000000e+000 result=40 08:51:11 Config A/D Result=40 08:51:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:11 Get A/D filter: -9.255963e+061 result=40 08:51:11 Get A/D value=-858993460 result=40 08:51:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:11 Parameters OK 08:51:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:11 Set A/D data flow result=40 08:51:11 Set A/D channel type result=40 08:51:11 Set A/D encoding result=40 08:51:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:11 Set channel filter=0.000000e+000 result=40 08:51:11 Config A/D Result=40 08:51:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:11 Get A/D filter: -9.255963e+061 result=40 08:51:11 Get A/D value=-858993460 result=40 08:51:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:11 Aux= 08:51:11 Message to Camera, serial 6092 queued 08:51:42 Received message from Master: op=PointingHead serial=6099 08:51:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:51:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:51:42 Point started: ret=0 08:51:42 point_skyscan result=0 08:51:43 Check angles 08:51:43 SkyScan query 08:51:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 08:51:44 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 08:51:44 Check angles 08:51:44 SkyScan query 08:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:51:45 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:51:45 Message to Master queued w/err=0: serial=6099 error=0 08:51:49 Received message from Master: op=Identify serial=6100 08:51:50 Received message from Master: op=Filter serial=6103 08:51:50 Color wheel filter change from 0 to 0 08:51:50 FLIGetFilterPos err=0 currentPosition=0 08:51:50 FLIGetStepsRemaining err=0 RemainingSteps=0 08:51:50 Filter is already there-color wheel unchanged 08:51:50 Received message from Master: op=Shutter serial=6104 08:51:50 Shutter LASER open 08:51:50 Received message from Camera: op=State serial=6106 08:51:50 GetSingleValue result=40 Value=cccccccc 08:51:50 SkyScan query 08:51:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:51:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:50 Parameters OK 08:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:50 Set A/D data flow result=40 08:51:50 Set A/D channel type result=40 08:51:50 Set A/D encoding result=40 08:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:50 Set channel filter=0.000000e+000 result=40 08:51:50 Config A/D Result=40 08:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:50 Get A/D filter: -9.255963e+061 result=40 08:51:50 Get A/D value=-858993460 result=40 08:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:51:50 Parameters OK 08:51:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:51:50 Set A/D data flow result=40 08:51:50 Set A/D channel type result=40 08:51:50 Set A/D encoding result=40 08:51:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:51:50 Set channel filter=0.000000e+000 result=40 08:51:50 Config A/D Result=40 08:51:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:51:50 Get A/D filter: -9.255963e+061 result=40 08:51:50 Get A/D value=-858993460 result=40 08:51:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:51:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:51:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:51:50 Aux= 08:51:50 Message to Camera, serial 6106 queued 08:51:53 Received message from Master: op=Shutter serial=6110 08:51:53 Shutter LASER close 08:51:54 Received message from Master: op=PointingHead serial=6114 08:51:54 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:51:54 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:51:54 Point started: ret=0 08:51:54 point_skyscan result=0 08:51:55 Check angles 08:51:55 SkyScan query 08:51:55 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.175<-21545 Statuses=0009 0009 08:51:55 Msec=0 True Az=135.93 Ze=-143.175 Az status=0009 Ze status=0009 08:51:55 Check angles 08:51:55 SkyScan query 08:51:56 SkyScan query done: ret=0 az=153.465<-10231 ze=-122.235<-20149 Statuses=0009 0009 08:51:56 Msec=750 True Az=153.465 Ze=-122.235 Az status=0009 Ze status=0009 08:51:56 Check angles 08:51:56 SkyScan query 08:51:57 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.28<-18752 Statuses=0009 0009 08:51:57 Msec=1500 True Az=170.835 Ze=-101.28 Az status=0009 Ze status=0009 08:51:57 Check angles 08:51:57 SkyScan query 08:51:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.355<-17357 Statuses=0008 0009 08:51:57 Msec=2250 True Az=176.025 Ze=-80.355 Az status=0008 Ze status=0009 08:51:58 Check angles 08:51:58 SkyScan query 08:51:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.385<-15959 Statuses=0008 0009 08:51:58 Msec=3000 True Az=175.995 Ze=-59.385 Az status=0008 Ze status=0009 08:51:58 Check angles 08:51:58 SkyScan query 08:51:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:51:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:51:59 Message to Master queued w/err=0: serial=6114 error=0 08:52:04 Received message from Master: op=Filter serial=6115 08:52:04 Color wheel filter change from 0 to 0 08:52:04 FLIGetFilterPos err=0 currentPosition=0 08:52:04 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:04 Filter is already there-color wheel unchanged 08:52:04 Received message from Master: op=Shutter serial=6116 08:52:04 Shutter LASER close 08:52:04 Received message from Camera: op=State serial=6118 08:52:04 GetSingleValue result=40 Value=cccccccc 08:52:04 SkyScan query 08:52:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:52:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:05 Parameters OK 08:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:05 Set A/D data flow result=40 08:52:05 Set A/D channel type result=40 08:52:05 Set A/D encoding result=40 08:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:05 Set channel filter=0.000000e+000 result=40 08:52:05 Config A/D Result=40 08:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:05 Get A/D filter: -9.255963e+061 result=40 08:52:05 Get A/D value=-858993460 result=40 08:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:05 Parameters OK 08:52:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:05 Set A/D data flow result=40 08:52:05 Set A/D channel type result=40 08:52:05 Set A/D encoding result=40 08:52:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:05 Set channel filter=0.000000e+000 result=40 08:52:05 Config A/D Result=40 08:52:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:05 Get A/D filter: -9.255963e+061 result=40 08:52:05 Get A/D value=-858993460 result=40 08:52:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:05 Aux= 08:52:05 Message to Camera, serial 6118 queued [UTC 2018-12-4 08:52:09] 08:52:36 Received message from Master: op=PointingHead serial=6125 08:52:36 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:52:36 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:52:36 Point started: ret=0 08:52:36 point_skyscan result=0 08:52:37 Check angles 08:52:37 SkyScan query 08:52:37 SkyScan query done: ret=0 az=153.24<-10216 ze=-22.02<-13468 Statuses=0009 0009 08:52:37 Msec=0 True Az=153.24 Ze=-22.02 Az status=0009 Ze status=0009 08:52:38 Check angles 08:52:38 SkyScan query 08:52:38 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.63<-12042 Statuses=0009 0009 08:52:38 Msec=750 True Az=135.42 Ze=-0.63 Az status=0009 Ze status=0009 08:52:38 Check angles 08:52:38 SkyScan query 08:52:39 SkyScan query done: ret=0 az=117.765<-7851 ze=20.31<-10646 Statuses=0009 0009 08:52:39 Msec=1500 True Az=117.765 Ze=20.31 Az status=0009 Ze status=0009 08:52:39 Check angles 08:52:39 SkyScan query 08:52:40 SkyScan query done: ret=0 az=100.5<-6700 ze=41.25<-9250 Statuses=0009 0009 08:52:40 Msec=2250 True Az=100.5 Ze=41.25 Az status=0009 Ze status=0009 08:52:40 Check angles 08:52:40 SkyScan query 08:52:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 08:52:40 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 08:52:41 Check angles 08:52:41 SkyScan query 08:52:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:52:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:52:41 Message to Master queued w/err=0: serial=6125 error=0 08:52:46 Received message from Master: op=Filter serial=6126 08:52:46 Color wheel filter change from 0 to 0 08:52:46 FLIGetFilterPos err=0 currentPosition=0 08:52:46 FLIGetStepsRemaining err=0 RemainingSteps=0 08:52:46 Filter is already there-color wheel unchanged 08:52:46 Received message from Master: op=Shutter serial=6127 08:52:46 Shutter LASER close 08:52:46 Received message from Camera: op=State serial=6129 08:52:46 GetSingleValue result=40 Value=cccccccc 08:52:46 SkyScan query 08:52:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:52:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:47 Parameters OK 08:52:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:47 Set A/D data flow result=40 08:52:47 Set A/D channel type result=40 08:52:47 Set A/D encoding result=40 08:52:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:47 Set channel filter=0.000000e+000 result=40 08:52:47 Config A/D Result=40 08:52:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:47 Get A/D filter: -9.255963e+061 result=40 08:52:47 Get A/D value=-858993460 result=40 08:52:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:52:47 Parameters OK 08:52:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:52:47 Set A/D data flow result=40 08:52:47 Set A/D channel type result=40 08:52:47 Set A/D encoding result=40 08:52:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:52:47 Set channel filter=0.000000e+000 result=40 08:52:47 Config A/D Result=40 08:52:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:52:47 Get A/D filter: -9.255963e+061 result=40 08:52:47 Get A/D value=-858993460 result=40 08:52:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:52:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:52:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:52:47 Aux= 08:52:47 Message to Camera, serial 6129 queued 08:53:18 Received message from Master: op=PointingHead serial=6136 08:53:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:53:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:53:18 Point started: ret=0 08:53:18 point_skyscan result=0 08:53:19 Check angles 08:53:19 SkyScan query 08:53:19 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 08:53:19 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 08:53:20 Check angles 08:53:20 SkyScan query 08:53:20 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 08:53:20 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 08:53:20 Check angles 08:53:20 SkyScan query 08:53:21 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 08:53:21 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 08:53:21 Check angles 08:53:21 SkyScan query 08:53:22 SkyScan query done: ret=0 az=161.91<-10794 ze=38.505<-9433 Statuses=0009 0008 08:53:22 Msec=2250 True Az=161.91 Ze=38.505 Az status=0009 Ze status=0008 08:53:22 Check angles 08:53:22 SkyScan query 08:53:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:53:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:53:23 Check angles 08:53:23 SkyScan query 08:53:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:53:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:53:23 Message to Master queued w/err=0: serial=6136 error=0 08:53:28 Received message from Master: op=Filter serial=6137 08:53:28 Color wheel filter change from 0 to 0 08:53:28 FLIGetFilterPos err=0 currentPosition=0 08:53:28 FLIGetStepsRemaining err=0 RemainingSteps=0 08:53:28 Filter is already there-color wheel unchanged 08:53:28 Received message from Master: op=Shutter serial=6138 08:53:28 Shutter LASER close 08:53:28 Received message from Camera: op=State serial=6140 08:53:28 GetSingleValue result=40 Value=cccccccc 08:53:28 SkyScan query 08:53:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:53:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:29 Parameters OK 08:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:29 Set A/D data flow result=40 08:53:29 Set A/D channel type result=40 08:53:29 Set A/D encoding result=40 08:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:29 Set channel filter=0.000000e+000 result=40 08:53:29 Config A/D Result=40 08:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:29 Get A/D filter: -9.255963e+061 result=40 08:53:29 Get A/D value=-858993460 result=40 08:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:53:29 Parameters OK 08:53:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:53:29 Set A/D data flow result=40 08:53:29 Set A/D channel type result=40 08:53:29 Set A/D encoding result=40 08:53:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:53:29 Set channel filter=0.000000e+000 result=40 08:53:29 Config A/D Result=40 08:53:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:53:29 Get A/D filter: -9.255963e+061 result=40 08:53:29 Get A/D value=-858993460 result=40 08:53:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:53:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:53:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:53:29 Aux= 08:53:29 Message to Camera, serial 6140 queued 08:54:00 Received message from Master: op=PointingHead serial=6147 08:54:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 08:54:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 08:54:00 Point started: ret=0 08:54:00 point_skyscan result=0 08:54:01 Check angles 08:54:01 SkyScan query 08:54:02 SkyScan query done: ret=0 az=152.475<-10165 ze=8.19<-11454 Statuses=0009 0009 08:54:02 Msec=0 True Az=152.475 Ze=8.19 Az status=0009 Ze status=0009 08:54:02 Check angles 08:54:02 SkyScan query 08:54:02 SkyScan query done: ret=0 az=135<-9000 ze=-12.765<-12851 Statuses=0009 0009 08:54:02 Msec=750 True Az=135 Ze=-12.765 Az status=0009 Ze status=0009 08:54:02 Check angles 08:54:02 SkyScan query 08:54:03 SkyScan query done: ret=0 az=117.405<-7827 ze=-33.69<-14246 Statuses=0009 0009 08:54:03 Msec=1500 True Az=117.405 Ze=-33.69 Az status=0009 Ze status=0009 08:54:03 Check angles 08:54:03 SkyScan query 08:54:04 SkyScan query done: ret=0 az=100.095<-6673 ze=-51.54<-15436 Statuses=0009 0009 08:54:04 Msec=2250 True Az=100.095 Ze=-51.54 Az status=0009 Ze status=0009 08:54:04 Check angles 08:54:04 SkyScan query 08:54:05 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 08:54:05 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 08:54:05 Check angles 08:54:05 SkyScan query 08:54:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:54:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 08:54:05 Message to Master queued w/err=0: serial=6147 error=0 08:54:10 Received message from Master: op=Filter serial=6148 08:54:10 Color wheel filter change from 0 to 0 08:54:10 FLIGetFilterPos err=0 currentPosition=0 08:54:10 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:10 Filter is already there-color wheel unchanged 08:54:10 Received message from Master: op=Shutter serial=6149 08:54:10 Shutter LASER close 08:54:11 Received message from Camera: op=State serial=6151 08:54:11 GetSingleValue result=40 Value=cccccccc 08:54:11 SkyScan query 08:54:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 08:54:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:11 Parameters OK 08:54:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:11 Set A/D data flow result=40 08:54:11 Set A/D channel type result=40 08:54:11 Set A/D encoding result=40 08:54:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:11 Set channel filter=0.000000e+000 result=40 08:54:11 Config A/D Result=40 08:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:11 Get A/D filter: -9.255963e+061 result=40 08:54:11 Get A/D value=-858993460 result=40 08:54:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:11 Parameters OK 08:54:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:11 Set A/D data flow result=40 08:54:11 Set A/D channel type result=40 08:54:11 Set A/D encoding result=40 08:54:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:11 Set channel filter=0.000000e+000 result=40 08:54:11 Config A/D Result=40 08:54:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:11 Get A/D filter: -9.255963e+061 result=40 08:54:11 Get A/D value=-858993460 result=40 08:54:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:11 Aux= 08:54:11 Message to Camera, serial 6151 queued 08:54:42 Received message from Master: op=PointingHead serial=6158 08:54:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:54:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:54:42 Point started: ret=0 08:54:42 point_skyscan result=0 08:54:43 Check angles 08:54:43 SkyScan query 08:54:44 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.585<-17439 Statuses=0009 0009 08:54:44 Msec=0 True Az=109.215 Ze=-81.585 Az status=0009 Ze status=0009 08:54:44 Check angles 08:54:44 SkyScan query 08:54:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.555<-18837 Statuses=0008 0009 08:54:44 Msec=750 True Az=113.01 Ze=-102.555 Az status=0008 Ze status=0009 08:54:45 Check angles 08:54:45 SkyScan query 08:54:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 08:54:45 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 08:54:45 Check angles 08:54:45 SkyScan query 08:54:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.42<-21628 Statuses=0008 0009 08:54:46 Msec=2250 True Az=112.995 Ze=-144.42 Az status=0008 Ze status=0009 08:54:46 Check angles 08:54:46 SkyScan query 08:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 08:54:47 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 08:54:47 Check angles 08:54:47 SkyScan query 08:54:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 08:54:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 08:54:47 Message to Master queued w/err=0: serial=6158 error=0 08:54:52 Received message from Master: op=Filter serial=6159 08:54:52 Color wheel filter change from 0 to 0 08:54:52 FLIGetFilterPos err=0 currentPosition=0 08:54:52 FLIGetStepsRemaining err=0 RemainingSteps=0 08:54:52 Filter is already there-color wheel unchanged 08:54:53 Received message from Master: op=Shutter serial=6160 08:54:53 Shutter LASER open 08:54:53 Received message from Camera: op=State serial=6162 08:54:53 GetSingleValue result=40 Value=cccccccc 08:54:53 SkyScan query 08:54:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:54:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:53 Parameters OK 08:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:53 Set A/D data flow result=40 08:54:53 Set A/D channel type result=40 08:54:53 Set A/D encoding result=40 08:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:53 Set channel filter=0.000000e+000 result=40 08:54:53 Config A/D Result=40 08:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:53 Get A/D filter: -9.255963e+061 result=40 08:54:53 Get A/D value=-858993460 result=40 08:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:54:53 Parameters OK 08:54:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:54:53 Set A/D data flow result=40 08:54:53 Set A/D channel type result=40 08:54:53 Set A/D encoding result=40 08:54:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:54:53 Set channel filter=0.000000e+000 result=40 08:54:53 Config A/D Result=40 08:54:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:54:53 Get A/D filter: -9.255963e+061 result=40 08:54:53 Get A/D value=-858993460 result=40 08:54:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:54:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:54:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:54:53 Aux= 08:54:53 Message to Camera, serial 6162 queued 08:54:56 Received message from Master: op=Shutter serial=6166 08:54:56 Shutter LASER close 08:54:56 Received message from Master: op=PointingHead serial=6170 08:54:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 08:54:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 08:54:57 Point started: ret=0 08:54:57 point_skyscan result=0 08:54:57 Check angles 08:54:57 SkyScan query 08:54:58 SkyScan query done: ret=0 az=89.49<-5966 ze=156.84<-1544 Statuses=0009 0009 08:54:58 Msec=0 True Az=89.49 Ze=156.84 Az status=0009 Ze status=0009 08:54:58 Check angles 08:54:58 SkyScan query 08:54:59 SkyScan query done: ret=0 az=72.105<-4807 ze=135.87<-2942 Statuses=0009 0009 08:54:59 Msec=750 True Az=72.105 Ze=135.87 Az status=0009 Ze status=0009 08:54:59 Check angles 08:54:59 SkyScan query 08:55:00 SkyScan query done: ret=0 az=54.45<-3630 ze=114.48<-4368 Statuses=0009 0009 08:55:00 Msec=1500 True Az=54.45 Ze=114.48 Az status=0009 Ze status=0009 08:55:00 Check angles 08:55:00 SkyScan query 08:55:00 SkyScan query done: ret=0 az=40.92<-2728 ze=93.51<-5766 Statuses=0009 0009 08:55:00 Msec=2250 True Az=40.92 Ze=93.51 Az status=0009 Ze status=0009 08:55:00 Check angles 08:55:00 SkyScan query 08:55:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 08:55:01 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 08:55:01 Check angles 08:55:01 SkyScan query 08:55:02 SkyScan query done: ret=0 az=40.995<-2733 ze=52.11<-8526 Statuses=0008 0009 08:55:02 Msec=3750 True Az=40.995 Ze=52.11 Az status=0008 Ze status=0009 08:55:02 Check angles 08:55:02 SkyScan query 08:55:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 08:55:03 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 08:55:03 Message to Master queued w/err=0: serial=6170 error=0 08:55:08 Received message from Master: op=Filter serial=6171 08:55:08 Color wheel filter change from 0 to 0 08:55:08 FLIGetFilterPos err=0 currentPosition=0 08:55:08 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:08 Filter is already there-color wheel unchanged 08:55:08 Received message from Master: op=Shutter serial=6172 08:55:08 Shutter LASER close 08:55:08 Received message from Camera: op=State serial=6174 08:55:08 GetSingleValue result=40 Value=cccccccc 08:55:08 SkyScan query 08:55:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 08:55:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:08 Parameters OK 08:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:08 Set A/D data flow result=40 08:55:08 Set A/D channel type result=40 08:55:08 Set A/D encoding result=40 08:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:08 Set channel filter=0.000000e+000 result=40 08:55:08 Config A/D Result=40 08:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:08 Get A/D filter: -9.255963e+061 result=40 08:55:08 Get A/D value=-858993460 result=40 08:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:08 Parameters OK 08:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:08 Set A/D data flow result=40 08:55:08 Set A/D channel type result=40 08:55:08 Set A/D encoding result=40 08:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:08 Set channel filter=0.000000e+000 result=40 08:55:08 Config A/D Result=40 08:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:08 Get A/D filter: -9.255963e+061 result=40 08:55:08 Get A/D value=-858993460 result=40 08:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:08 Aux= 08:55:08 Message to Camera, serial 6174 queued 08:55:39 Received message from Master: op=PointingHead serial=6181 08:55:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 08:55:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 08:55:40 Point started: ret=0 08:55:40 point_skyscan result=0 08:55:40 Check angles 08:55:40 SkyScan query 08:55:41 SkyScan query done: ret=0 az=63.675<-4245 ze=66.555<-7563 Statuses=0009 0008 08:55:41 Msec=0 True Az=63.675 Ze=66.555 Az status=0009 Ze status=0008 08:55:41 Check angles 08:55:41 SkyScan query 08:55:42 SkyScan query done: ret=0 az=81.105<-5407 ze=66.51<-7566 Statuses=0009 0008 08:55:42 Msec=750 True Az=81.105 Ze=66.51 Az status=0009 Ze status=0008 08:55:42 Check angles 08:55:42 SkyScan query 08:55:42 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 08:55:42 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 08:55:43 Check angles 08:55:43 SkyScan query 08:55:43 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 08:55:43 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 08:55:43 Check angles 08:55:43 SkyScan query 08:55:44 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 08:55:44 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 08:55:44 Check angles 08:55:44 SkyScan query 08:55:45 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 08:55:45 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 08:55:45 Check angles 08:55:45 SkyScan query 08:55:46 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 08:55:46 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 08:55:46 Message to Master queued w/err=0: serial=6181 error=0 08:55:51 Received message from Master: op=Filter serial=6182 08:55:51 Color wheel filter change from 0 to 0 08:55:51 FLIGetFilterPos err=0 currentPosition=0 08:55:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:55:51 Filter is already there-color wheel unchanged 08:55:51 Received message from Master: op=Shutter serial=6183 08:55:51 Shutter LASER close 08:55:51 Received message from Camera: op=State serial=6185 08:55:51 GetSingleValue result=40 Value=cccccccc 08:55:51 SkyScan query 08:55:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 08:55:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:51 Parameters OK 08:55:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:51 Set A/D data flow result=40 08:55:51 Set A/D channel type result=40 08:55:51 Set A/D encoding result=40 08:55:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:51 Set channel filter=0.000000e+000 result=40 08:55:51 Config A/D Result=40 08:55:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:51 Get A/D filter: -9.255963e+061 result=40 08:55:51 Get A/D value=-858993460 result=40 08:55:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:55:51 Parameters OK 08:55:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:55:51 Set A/D data flow result=40 08:55:51 Set A/D channel type result=40 08:55:51 Set A/D encoding result=40 08:55:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:55:51 Set channel filter=0.000000e+000 result=40 08:55:51 Config A/D Result=40 08:55:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:55:51 Get A/D filter: -9.255963e+061 result=40 08:55:51 Get A/D value=-858993460 result=40 08:55:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:55:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:55:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:55:51 Aux= 08:55:51 Message to Camera, serial 6185 queued 08:56:22 Received message from Master: op=PointingHead serial=6192 08:56:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 08:56:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 08:56:23 Point started: ret=0 08:56:23 point_skyscan result=0 08:56:23 Check angles 08:56:23 SkyScan query 08:56:24 SkyScan query done: ret=0 az=135<-9000 ze=36.75<-9550 Statuses=0009 0009 08:56:24 Msec=0 True Az=135 Ze=36.75 Az status=0009 Ze status=0009 08:56:24 Check angles 08:56:24 SkyScan query 08:56:25 SkyScan query done: ret=0 az=117.06<-7804 ze=15.36<-10976 Statuses=0009 0009 08:56:25 Msec=750 True Az=117.06 Ze=15.36 Az status=0009 Ze status=0009 08:56:25 Check angles 08:56:25 SkyScan query 08:56:25 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.61<-12374 Statuses=0009 0009 08:56:25 Msec=1500 True Az=99.795 Ze=-5.61 Az status=0009 Ze status=0009 08:56:26 Check angles 08:56:26 SkyScan query 08:56:26 SkyScan query done: ret=0 az=82.215<-5481 ze=-26.58<-13772 Statuses=0009 0009 08:56:26 Msec=2250 True Az=82.215 Ze=-26.58 Az status=0009 Ze status=0009 08:56:26 Check angles 08:56:26 SkyScan query 08:56:27 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.565<-14571 Statuses=0009 0008 08:56:27 Msec=3000 True Az=64.815 Ze=-38.565 Az status=0009 Ze status=0008 08:56:27 Check angles 08:56:27 SkyScan query 08:56:28 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.535<-14569 Statuses=0009 0008 08:56:28 Msec=3750 True Az=47.355 Ze=-38.535 Az status=0009 Ze status=0008 08:56:28 Check angles 08:56:28 SkyScan query 08:56:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:56:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 08:56:28 Message to Master queued w/err=0: serial=6192 error=0 08:56:33 Received message from Master: op=Filter serial=6193 08:56:33 Color wheel filter change from 0 to 0 08:56:33 FLIGetFilterPos err=0 currentPosition=0 08:56:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:56:33 Filter is already there-color wheel unchanged 08:56:34 Received message from Master: op=Shutter serial=6194 08:56:34 Shutter LASER close 08:56:34 Received message from Camera: op=State serial=6196 08:56:34 GetSingleValue result=40 Value=cccccccc 08:56:34 SkyScan query 08:56:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 08:56:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:34 Parameters OK 08:56:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:34 Set A/D data flow result=40 08:56:34 Set A/D channel type result=40 08:56:34 Set A/D encoding result=40 08:56:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:34 Set channel filter=0.000000e+000 result=40 08:56:34 Config A/D Result=40 08:56:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:34 Get A/D filter: -9.255963e+061 result=40 08:56:34 Get A/D value=-858993460 result=40 08:56:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:56:34 Parameters OK 08:56:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:56:34 Set A/D data flow result=40 08:56:34 Set A/D channel type result=40 08:56:34 Set A/D encoding result=40 08:56:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:56:34 Set channel filter=0.000000e+000 result=40 08:56:34 Config A/D Result=40 08:56:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:56:34 Get A/D filter: -9.255963e+061 result=40 08:56:34 Get A/D value=-858993460 result=40 08:56:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:56:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:56:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:56:34 Aux= 08:56:34 Message to Camera, serial 6196 queued 08:57:05 Received message from Master: op=PointingHead serial=6203 08:57:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 08:57:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 08:57:05 Point started: ret=0 08:57:05 point_skyscan result=0 08:57:06 Check angles 08:57:06 SkyScan query 08:57:07 SkyScan query done: ret=0 az=64.365<-4291 ze=-68.82<-16588 Statuses=0009 0009 08:57:07 Msec=0 True Az=64.365 Ze=-68.82 Az status=0009 Ze status=0009 08:57:07 Check angles 08:57:07 SkyScan query 08:57:07 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.775<-17985 Statuses=0009 0009 08:57:07 Msec=750 True Az=82.095 Ze=-89.775 Az status=0009 Ze status=0009 08:57:08 Check angles 08:57:08 SkyScan query 08:57:08 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.73<-19382 Statuses=0009 0009 08:57:08 Msec=1500 True Az=99.54 Ze=-110.73 Az status=0009 Ze status=0009 08:57:08 Check angles 08:57:08 SkyScan query 08:57:09 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.67<-20778 Statuses=0009 0009 08:57:09 Msec=2250 True Az=116.97 Ze=-131.67 Az status=0009 Ze status=0009 08:57:09 Check angles 08:57:09 SkyScan query 08:57:10 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 08:57:10 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 08:57:10 Check angles 08:57:10 SkyScan query 08:57:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 08:57:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 08:57:10 Message to Master queued w/err=0: serial=6203 error=0 08:57:15 Received message from Master: op=Filter serial=6204 08:57:15 Color wheel filter change from 0 to 0 08:57:15 FLIGetFilterPos err=0 currentPosition=0 08:57:15 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:15 Filter is already there-color wheel unchanged 08:57:16 Received message from Master: op=Shutter serial=6205 08:57:16 Shutter LASER close 08:57:16 Received message from Camera: op=State serial=6207 08:57:16 GetSingleValue result=40 Value=cccccccc 08:57:16 SkyScan query 08:57:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 08:57:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:16 Parameters OK 08:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:16 Set A/D data flow result=40 08:57:16 Set A/D channel type result=40 08:57:16 Set A/D encoding result=40 08:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:16 Set channel filter=0.000000e+000 result=40 08:57:16 Config A/D Result=40 08:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:16 Get A/D filter: -9.255963e+061 result=40 08:57:16 Get A/D value=-858993460 result=40 08:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:16 Parameters OK 08:57:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:16 Set A/D data flow result=40 08:57:16 Set A/D channel type result=40 08:57:16 Set A/D encoding result=40 08:57:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:16 Set channel filter=0.000000e+000 result=40 08:57:16 Config A/D Result=40 08:57:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:16 Get A/D filter: -9.255963e+061 result=40 08:57:16 Get A/D value=-858993460 result=40 08:57:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:16 Aux= 08:57:16 Message to Camera, serial 6207 queued 08:57:47 Received message from Master: op=PointingHead serial=6214 08:57:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 08:57:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 08:57:47 Point started: ret=0 08:57:47 point_skyscan result=0 08:57:48 Check angles 08:57:48 SkyScan query 08:57:49 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.925<-23395 Statuses=0009 0009 08:57:49 Msec=0 True Az=113.025 Ze=-170.925 Az status=0009 Ze status=0009 08:57:49 Check angles 08:57:49 SkyScan query 08:57:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 08:57:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 08:57:49 Message to Master queued w/err=0: serial=6214 error=0 08:57:54 Received message from Master: op=Filter serial=6215 08:57:54 Color wheel filter change from 0 to 0 08:57:54 FLIGetFilterPos err=0 currentPosition=0 08:57:54 FLIGetStepsRemaining err=0 RemainingSteps=0 08:57:54 Filter is already there-color wheel unchanged 08:57:55 Received message from Master: op=Shutter serial=6216 08:57:55 Shutter LASER open 08:57:55 Received message from Camera: op=State serial=6218 08:57:55 GetSingleValue result=40 Value=cccccccc 08:57:55 SkyScan query 08:57:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 08:57:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:55 Parameters OK 08:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:55 Set A/D data flow result=40 08:57:55 Set A/D channel type result=40 08:57:55 Set A/D encoding result=40 08:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:55 Set channel filter=0.000000e+000 result=40 08:57:55 Config A/D Result=40 08:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:55 Get A/D filter: -9.255963e+061 result=40 08:57:55 Get A/D value=-858993460 result=40 08:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:57:55 Parameters OK 08:57:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:57:55 Set A/D data flow result=40 08:57:55 Set A/D channel type result=40 08:57:55 Set A/D encoding result=40 08:57:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:57:55 Set channel filter=0.000000e+000 result=40 08:57:55 Config A/D Result=40 08:57:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:57:55 Get A/D filter: -9.255963e+061 result=40 08:57:55 Get A/D value=-858993460 result=40 08:57:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:57:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:57:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:57:55 Aux= 08:57:55 Message to Camera, serial 6218 queued 08:57:58 Received message from Master: op=Shutter serial=6222 08:57:58 Shutter LASER close 08:57:58 Received message from Master: op=PointingHead serial=6226 08:57:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 08:57:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 08:57:59 Point started: ret=0 08:57:59 point_skyscan result=0 08:58:00 Check angles 08:58:00 SkyScan query 08:58:00 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.355<-21557 Statuses=0009 0009 08:58:00 Msec=0 True Az=135.825 Ze=-143.355 Az status=0009 Ze status=0009 08:58:00 Check angles 08:58:00 SkyScan query 08:58:01 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.415<-20161 Statuses=0009 0009 08:58:01 Msec=750 True Az=153.36 Ze=-122.415 Az status=0009 Ze status=0009 08:58:01 Check angles 08:58:01 SkyScan query 08:58:02 SkyScan query done: ret=0 az=170.91<-11394 ze=-101.46<-18764 Statuses=0009 0009 08:58:02 Msec=1500 True Az=170.91 Ze=-101.46 Az status=0009 Ze status=0009 08:58:02 Check angles 08:58:02 SkyScan query 08:58:02 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.505<-17367 Statuses=0008 0009 08:58:02 Msec=2250 True Az=176.025 Ze=-80.505 Az status=0008 Ze status=0009 08:58:03 Check angles 08:58:03 SkyScan query 08:58:03 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.52<-15968 Statuses=0008 0009 08:58:03 Msec=3000 True Az=176.01 Ze=-59.52 Az status=0008 Ze status=0009 08:58:03 Check angles 08:58:03 SkyScan query 08:58:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 08:58:04 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 08:58:04 Message to Master queued w/err=0: serial=6226 error=0 08:58:09 Received message from Master: op=Filter serial=6227 08:58:09 Color wheel filter change from 0 to 0 08:58:09 FLIGetFilterPos err=0 currentPosition=0 08:58:09 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:09 Filter is already there-color wheel unchanged 08:58:09 Received message from Master: op=Shutter serial=6228 08:58:09 Shutter LASER close 08:58:09 Received message from Camera: op=State serial=6230 08:58:09 GetSingleValue result=40 Value=cccccccc 08:58:09 SkyScan query 08:58:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 08:58:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:10 Parameters OK 08:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:10 Set A/D data flow result=40 08:58:10 Set A/D channel type result=40 08:58:10 Set A/D encoding result=40 08:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:10 Set channel filter=0.000000e+000 result=40 08:58:10 Config A/D Result=40 08:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:10 Get A/D filter: -9.255963e+061 result=40 08:58:10 Get A/D value=-858993460 result=40 08:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:10 Parameters OK 08:58:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:10 Set A/D data flow result=40 08:58:10 Set A/D channel type result=40 08:58:10 Set A/D encoding result=40 08:58:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:10 Set channel filter=0.000000e+000 result=40 08:58:10 Config A/D Result=40 08:58:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:10 Get A/D filter: -9.255963e+061 result=40 08:58:10 Get A/D value=-858993460 result=40 08:58:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:10 Aux= 08:58:10 Message to Camera, serial 6230 queued 08:58:41 Received message from Master: op=PointingHead serial=6237 08:58:41 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 08:58:41 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 08:58:41 Point started: ret=0 08:58:41 point_skyscan result=0 08:58:42 Check angles 08:58:42 SkyScan query 08:58:42 SkyScan query done: ret=0 az=153.195<-10213 ze=-21.9<-13460 Statuses=0009 0009 08:58:42 Msec=0 True Az=153.195 Ze=-21.9 Az status=0009 Ze status=0009 08:58:42 Check angles 08:58:42 SkyScan query 08:58:43 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.93<-12062 Statuses=0009 0009 08:58:43 Msec=750 True Az=135.75 Ze=-0.93 Az status=0009 Ze status=0009 08:58:43 Check angles 08:58:43 SkyScan query 08:58:44 SkyScan query done: ret=0 az=118.2<-7880 ze=20.025<-10665 Statuses=0009 0009 08:58:44 Msec=1500 True Az=118.2 Ze=20.025 Az status=0009 Ze status=0009 08:58:44 Check angles 08:58:44 SkyScan query 08:58:45 SkyScan query done: ret=0 az=100.83<-6722 ze=40.965<-9269 Statuses=0009 0009 08:58:45 Msec=2250 True Az=100.83 Ze=40.965 Az status=0009 Ze status=0009 08:58:45 Check angles 08:58:45 SkyScan query 08:58:45 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 08:58:45 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 08:58:45 Check angles 08:58:45 SkyScan query 08:58:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 08:58:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 08:58:46 Message to Master queued w/err=0: serial=6237 error=0 08:58:51 Received message from Master: op=Filter serial=6238 08:58:51 Color wheel filter change from 0 to 0 08:58:51 FLIGetFilterPos err=0 currentPosition=0 08:58:51 FLIGetStepsRemaining err=0 RemainingSteps=0 08:58:51 Filter is already there-color wheel unchanged 08:58:51 Received message from Master: op=Shutter serial=6239 08:58:51 Shutter LASER close 08:58:51 Received message from Camera: op=State serial=6241 08:58:51 GetSingleValue result=40 Value=cccccccc 08:58:51 SkyScan query 08:58:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 08:58:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:52 Parameters OK 08:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:52 Set A/D data flow result=40 08:58:52 Set A/D channel type result=40 08:58:52 Set A/D encoding result=40 08:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:52 Set channel filter=0.000000e+000 result=40 08:58:52 Config A/D Result=40 08:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:52 Get A/D filter: -9.255963e+061 result=40 08:58:52 Get A/D value=-858993460 result=40 08:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:58:52 Parameters OK 08:58:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:58:52 Set A/D data flow result=40 08:58:52 Set A/D channel type result=40 08:58:52 Set A/D encoding result=40 08:58:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:58:52 Set channel filter=0.000000e+000 result=40 08:58:52 Config A/D Result=40 08:58:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:58:52 Get A/D filter: -9.255963e+061 result=40 08:58:52 Get A/D value=-858993460 result=40 08:58:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:58:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:58:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:58:52 Aux= 08:58:52 Message to Camera, serial 6241 queued 08:59:23 Received message from Master: op=PointingHead serial=6248 08:59:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 08:59:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 08:59:23 Point started: ret=0 08:59:23 point_skyscan result=0 08:59:24 Check angles 08:59:24 SkyScan query 08:59:24 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 08:59:24 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 08:59:25 Check angles 08:59:25 SkyScan query 08:59:25 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 08:59:25 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 08:59:25 Check angles 08:59:25 SkyScan query 08:59:26 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 08:59:26 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 08:59:26 Check angles 08:59:26 SkyScan query 08:59:27 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 08:59:27 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 08:59:27 Check angles 08:59:27 SkyScan query 08:59:27 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 08:59:27 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 08:59:28 Check angles 08:59:28 SkyScan query 08:59:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 08:59:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 08:59:28 Message to Master queued w/err=0: serial=6248 error=0 08:59:33 Received message from Master: op=Filter serial=6249 08:59:33 Color wheel filter change from 0 to 0 08:59:33 FLIGetFilterPos err=0 currentPosition=0 08:59:33 FLIGetStepsRemaining err=0 RemainingSteps=0 08:59:33 Filter is already there-color wheel unchanged 08:59:33 Received message from Master: op=Shutter serial=6250 08:59:33 Shutter LASER close 08:59:33 Received message from Camera: op=State serial=6252 08:59:33 GetSingleValue result=40 Value=cccccccc 08:59:33 SkyScan query 08:59:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 08:59:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:34 Parameters OK 08:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:34 Set A/D data flow result=40 08:59:34 Set A/D channel type result=40 08:59:34 Set A/D encoding result=40 08:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:34 Set channel filter=0.000000e+000 result=40 08:59:34 Config A/D Result=40 08:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:34 Get A/D filter: -9.255963e+061 result=40 08:59:34 Get A/D value=-858993460 result=40 08:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 08:59:34 Parameters OK 08:59:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 08:59:34 Set A/D data flow result=40 08:59:34 Set A/D channel type result=40 08:59:34 Set A/D encoding result=40 08:59:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 08:59:34 Set channel filter=0.000000e+000 result=40 08:59:34 Config A/D Result=40 08:59:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 08:59:34 Get A/D filter: -9.255963e+061 result=40 08:59:34 Get A/D value=-858993460 result=40 08:59:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 08:59:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 08:59:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 08:59:34 Aux= 08:59:34 Message to Camera, serial 6252 queued 09:00:05 Received message from Master: op=PointingHead serial=6259 09:00:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:00:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:00:05 Point started: ret=0 09:00:05 point_skyscan result=0 09:00:06 Check angles 09:00:06 SkyScan query 09:00:07 SkyScan query done: ret=0 az=152.82<-10188 ze=8.25<-11450 Statuses=0009 0009 09:00:07 Msec=0 True Az=152.82 Ze=8.25 Az status=0009 Ze status=0009 09:00:07 Check angles 09:00:07 SkyScan query 09:00:07 SkyScan query done: ret=0 az=135.57<-9038 ze=-12.255<-12817 Statuses=0009 0009 09:00:07 Msec=750 True Az=135.57 Ze=-12.255 Az status=0009 Ze status=0009 09:00:08 Check angles 09:00:08 SkyScan query 09:00:08 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.21<-14214 Statuses=0009 0009 09:00:08 Msec=1500 True Az=118.035 Ze=-33.21 Az status=0009 Ze status=0009 09:00:08 Check angles 09:00:08 SkyScan query 09:00:09 SkyScan query done: ret=0 az=100.62<-6708 ze=-51.525<-15435 Statuses=0009 0009 09:00:09 Msec=2250 True Az=100.62 Ze=-51.525 Az status=0009 Ze status=0009 09:00:09 Check angles 09:00:09 SkyScan query 09:00:10 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:00:10 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:00:10 Check angles 09:00:10 SkyScan query 09:00:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 09:00:10 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 09:00:10 Message to Master queued w/err=0: serial=6259 error=0 09:00:15 Received message from Master: op=Filter serial=6260 09:00:15 Color wheel filter change from 0 to 0 09:00:15 FLIGetFilterPos err=0 currentPosition=0 09:00:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:15 Filter is already there-color wheel unchanged 09:00:16 Received message from Master: op=Shutter serial=6261 09:00:16 Shutter LASER close 09:00:16 Received message from Camera: op=State serial=6263 09:00:16 GetSingleValue result=40 Value=cccccccc 09:00:16 SkyScan query 09:00:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:00:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:16 Parameters OK 09:00:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:16 Set A/D data flow result=40 09:00:16 Set A/D channel type result=40 09:00:16 Set A/D encoding result=40 09:00:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:16 Set channel filter=0.000000e+000 result=40 09:00:16 Config A/D Result=40 09:00:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:16 Get A/D filter: -9.255963e+061 result=40 09:00:16 Get A/D value=-858993460 result=40 09:00:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:16 Parameters OK 09:00:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:16 Set A/D data flow result=40 09:00:16 Set A/D channel type result=40 09:00:16 Set A/D encoding result=40 09:00:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:16 Set channel filter=0.000000e+000 result=40 09:00:16 Config A/D Result=40 09:00:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:16 Get A/D filter: -9.255963e+061 result=40 09:00:16 Get A/D value=-858993460 result=40 09:00:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:16 Aux= 09:00:16 Message to Camera, serial 6263 queued 09:00:47 Received message from Master: op=PointingHead serial=6270 09:00:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:00:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:00:47 Point started: ret=0 09:00:47 point_skyscan result=0 09:00:48 Check angles 09:00:48 SkyScan query 09:00:49 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.33<-17422 Statuses=0009 0009 09:00:49 Msec=0 True Az=109.185 Ze=-81.33 Az status=0009 Ze status=0009 09:00:49 Check angles 09:00:49 SkyScan query 09:00:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.27<-18818 Statuses=0008 0009 09:00:49 Msec=750 True Az=113.01 Ze=-102.27 Az status=0008 Ze status=0009 09:00:50 Check angles 09:00:50 SkyScan query 09:00:50 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.225<-20215 Statuses=0008 0009 09:00:50 Msec=1500 True Az=113.01 Ze=-123.225 Az status=0008 Ze status=0009 09:00:50 Check angles 09:00:50 SkyScan query 09:00:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.18<-21612 Statuses=0008 0009 09:00:51 Msec=2250 True Az=112.995 Ze=-144.18 Az status=0008 Ze status=0009 09:00:51 Check angles 09:00:51 SkyScan query 09:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.135<-23009 Statuses=0008 0009 09:00:52 Msec=3000 True Az=112.995 Ze=-165.135 Az status=0008 Ze status=0009 09:00:52 Check angles 09:00:52 SkyScan query 09:00:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:00:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:00:52 Message to Master queued w/err=0: serial=6270 error=0 09:00:57 Received message from Master: op=Filter serial=6271 09:00:57 Color wheel filter change from 0 to 0 09:00:57 FLIGetFilterPos err=0 currentPosition=0 09:00:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:00:57 Filter is already there-color wheel unchanged 09:00:58 Received message from Master: op=Shutter serial=6272 09:00:58 Shutter LASER open 09:00:58 Received message from Camera: op=State serial=6274 09:00:58 GetSingleValue result=40 Value=cccccccc 09:00:58 SkyScan query 09:00:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:00:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:58 Parameters OK 09:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:58 Set A/D data flow result=40 09:00:58 Set A/D channel type result=40 09:00:58 Set A/D encoding result=40 09:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:58 Set channel filter=0.000000e+000 result=40 09:00:58 Config A/D Result=40 09:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:58 Get A/D filter: -9.255963e+061 result=40 09:00:58 Get A/D value=-858993460 result=40 09:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:00:58 Parameters OK 09:00:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:00:58 Set A/D data flow result=40 09:00:58 Set A/D channel type result=40 09:00:58 Set A/D encoding result=40 09:00:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:00:58 Set channel filter=0.000000e+000 result=40 09:00:58 Config A/D Result=40 09:00:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:00:58 Get A/D filter: -9.255963e+061 result=40 09:00:58 Get A/D value=-858993460 result=40 09:00:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:00:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:00:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:00:58 Aux= 09:00:58 Message to Camera, serial 6274 queued 09:01:01 Received message from Master: op=Shutter serial=6278 09:01:01 Shutter LASER close 09:01:01 Received message from Master: op=PointingHead serial=6282 09:01:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:01:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-4 09:01:02] 09:01:02 Point started: ret=0 09:01:02 point_skyscan result=0 09:01:02 Check angles 09:01:02 SkyScan query 09:01:03 SkyScan query done: ret=0 az=88.41<-5894 ze=155.4<-1640 Statuses=0009 0009 09:01:03 Msec=0 True Az=88.41 Ze=155.4 Az status=0009 Ze status=0009 09:01:03 Check angles 09:01:03 SkyScan query 09:01:04 SkyScan query done: ret=0 az=70.56<-4704 ze=134.025<-3065 Statuses=0009 0009 09:01:04 Msec=750 True Az=70.56 Ze=134.025 Az status=0009 Ze status=0009 09:01:04 Check angles 09:01:04 SkyScan query 09:01:04 SkyScan query done: ret=0 az=53.19<-3546 ze=113.04<-4464 Statuses=0009 0009 09:01:04 Msec=1500 True Az=53.19 Ze=113.04 Az status=0009 Ze status=0009 09:01:05 Check angles 09:01:05 SkyScan query 09:01:05 SkyScan query done: ret=0 az=41.07<-2738 ze=92.1<-5860 Statuses=0009 0009 09:01:05 Msec=2250 True Az=41.07 Ze=92.1 Az status=0009 Ze status=0009 09:01:05 Check angles 09:01:05 SkyScan query 09:01:06 SkyScan query done: ret=0 az=40.995<-2733 ze=70.71<-7286 Statuses=0008 0009 09:01:06 Msec=3000 True Az=40.995 Ze=70.71 Az status=0008 Ze status=0009 09:01:06 Check angles 09:01:06 SkyScan query 09:01:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.525<-8565 Statuses=0008 0009 09:01:07 Msec=3750 True Az=40.995 Ze=51.525 Az status=0008 Ze status=0009 09:01:07 Check angles 09:01:07 SkyScan query 09:01:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:01:08 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:01:08 Message to Master queued w/err=0: serial=6282 error=0 09:01:13 Received message from Master: op=Filter serial=6283 09:01:13 Color wheel filter change from 0 to 0 09:01:13 FLIGetFilterPos err=0 currentPosition=0 09:01:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:13 Filter is already there-color wheel unchanged 09:01:13 Received message from Master: op=Shutter serial=6284 09:01:13 Shutter LASER close 09:01:13 Received message from Camera: op=State serial=6286 09:01:13 GetSingleValue result=40 Value=cccccccc 09:01:13 SkyScan query 09:01:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:13 Parameters OK 09:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:13 Set A/D data flow result=40 09:01:13 Set A/D channel type result=40 09:01:13 Set A/D encoding result=40 09:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:13 Set channel filter=0.000000e+000 result=40 09:01:13 Config A/D Result=40 09:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:13 Get A/D filter: -9.255963e+061 result=40 09:01:13 Get A/D value=-858993460 result=40 09:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:13 Parameters OK 09:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:13 Set A/D data flow result=40 09:01:13 Set A/D channel type result=40 09:01:13 Set A/D encoding result=40 09:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:13 Set channel filter=0.000000e+000 result=40 09:01:13 Config A/D Result=40 09:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:13 Get A/D filter: -9.255963e+061 result=40 09:01:13 Get A/D value=-858993460 result=40 09:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:13 Aux= 09:01:13 Message to Camera, serial 6286 queued 09:01:44 Received message from Master: op=PointingHead serial=6293 09:01:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:01:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:01:45 Point started: ret=0 09:01:45 point_skyscan result=0 09:01:45 Check angles 09:01:45 SkyScan query 09:01:46 SkyScan query done: ret=0 az=64.26<-4284 ze=66.555<-7563 Statuses=0009 0008 09:01:46 Msec=0 True Az=64.26 Ze=66.555 Az status=0009 Ze status=0008 09:01:46 Check angles 09:01:46 SkyScan query 09:01:47 SkyScan query done: ret=0 az=81.99<-5466 ze=66.495<-7567 Statuses=0009 0008 09:01:47 Msec=750 True Az=81.99 Ze=66.495 Az status=0009 Ze status=0008 09:01:47 Check angles 09:01:47 SkyScan query 09:01:47 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 09:01:47 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 09:01:48 Check angles 09:01:48 SkyScan query 09:01:48 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 09:01:48 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 09:01:48 Check angles 09:01:48 SkyScan query 09:01:49 SkyScan query done: ret=0 az=134.745<-8983 ze=66.495<-7567 Statuses=0009 0008 09:01:49 Msec=3000 True Az=134.745 Ze=66.495 Az status=0009 Ze status=0008 09:01:49 Check angles 09:01:49 SkyScan query 09:01:50 SkyScan query done: ret=0 az=152.34<-10156 ze=66.495<-7567 Statuses=0009 0008 09:01:50 Msec=3750 True Az=152.34 Ze=66.495 Az status=0009 Ze status=0008 09:01:50 Check angles 09:01:50 SkyScan query 09:01:51 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:01:51 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:01:51 Message to Master queued w/err=0: serial=6293 error=0 09:01:56 Received message from Master: op=Filter serial=6294 09:01:56 Color wheel filter change from 0 to 0 09:01:56 FLIGetFilterPos err=0 currentPosition=0 09:01:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:01:56 Filter is already there-color wheel unchanged 09:01:56 Received message from Master: op=Shutter serial=6295 09:01:56 Shutter LASER close 09:01:56 Received message from Camera: op=State serial=6297 09:01:56 GetSingleValue result=40 Value=cccccccc 09:01:56 SkyScan query 09:01:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:56 Parameters OK 09:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:56 Set A/D data flow result=40 09:01:56 Set A/D channel type result=40 09:01:56 Set A/D encoding result=40 09:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:56 Set channel filter=0.000000e+000 result=40 09:01:56 Config A/D Result=40 09:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:56 Get A/D filter: -9.255963e+061 result=40 09:01:56 Get A/D value=-858993460 result=40 09:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:01:56 Parameters OK 09:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:01:56 Set A/D data flow result=40 09:01:56 Set A/D channel type result=40 09:01:56 Set A/D encoding result=40 09:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:01:56 Set channel filter=0.000000e+000 result=40 09:01:56 Config A/D Result=40 09:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:01:56 Get A/D filter: -9.255963e+061 result=40 09:01:56 Get A/D value=-858993460 result=40 09:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:01:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:01:56 Aux= 09:01:56 Message to Camera, serial 6297 queued 09:02:27 Received message from Master: op=PointingHead serial=6304 09:02:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:02:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:02:28 Point started: ret=0 09:02:28 point_skyscan result=0 09:02:28 Check angles 09:02:28 SkyScan query 09:02:29 SkyScan query done: ret=0 az=135.03<-9002 ze=36.75<-9550 Statuses=0009 0009 09:02:29 Msec=0 True Az=135.03 Ze=36.75 Az status=0009 Ze status=0009 09:02:29 Check angles 09:02:29 SkyScan query 09:02:30 SkyScan query done: ret=0 az=117.015<-7801 ze=15.375<-10975 Statuses=0009 0009 09:02:30 Msec=750 True Az=117.015 Ze=15.375 Az status=0009 Ze status=0009 09:02:30 Check angles 09:02:30 SkyScan query 09:02:30 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.58<-12372 Statuses=0009 0009 09:02:30 Msec=1500 True Az=99.825 Ze=-5.58 Az status=0009 Ze status=0009 09:02:31 Check angles 09:02:31 SkyScan query 09:02:31 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.565<-13771 Statuses=0009 0009 09:02:31 Msec=2250 True Az=82.335 Ze=-26.565 Az status=0009 Ze status=0009 09:02:31 Check angles 09:02:31 SkyScan query 09:02:32 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.565<-14571 Statuses=0009 0008 09:02:32 Msec=3000 True Az=64.455 Ze=-38.565 Az status=0009 Ze status=0008 09:02:32 Check angles 09:02:32 SkyScan query 09:02:33 SkyScan query done: ret=0 az=46.995<-3133 ze=-38.535<-14569 Statuses=0009 0008 09:02:33 Msec=3750 True Az=46.995 Ze=-38.535 Az status=0009 Ze status=0008 09:02:33 Check angles 09:02:33 SkyScan query 09:02:33 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 09:02:33 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 09:02:33 Message to Master queued w/err=0: serial=6304 error=0 09:02:38 Received message from Master: op=Filter serial=6305 09:02:38 Color wheel filter change from 0 to 0 09:02:38 FLIGetFilterPos err=0 currentPosition=0 09:02:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:02:38 Filter is already there-color wheel unchanged 09:02:39 Received message from Master: op=Shutter serial=6306 09:02:39 Shutter LASER close 09:02:39 Received message from Camera: op=State serial=6308 09:02:39 GetSingleValue result=40 Value=cccccccc 09:02:39 SkyScan query 09:02:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:02:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:39 Parameters OK 09:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:39 Set A/D data flow result=40 09:02:39 Set A/D channel type result=40 09:02:39 Set A/D encoding result=40 09:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:39 Set channel filter=0.000000e+000 result=40 09:02:39 Config A/D Result=40 09:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:39 Get A/D filter: -9.255963e+061 result=40 09:02:39 Get A/D value=-858993460 result=40 09:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:02:39 Parameters OK 09:02:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:02:39 Set A/D data flow result=40 09:02:39 Set A/D channel type result=40 09:02:39 Set A/D encoding result=40 09:02:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:02:39 Set channel filter=0.000000e+000 result=40 09:02:39 Config A/D Result=40 09:02:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:02:39 Get A/D filter: -9.255963e+061 result=40 09:02:39 Get A/D value=-858993460 result=40 09:02:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:02:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:02:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:02:39 Aux= 09:02:39 Message to Camera, serial 6308 queued 09:03:10 Received message from Master: op=PointingHead serial=6315 09:03:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:03:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:03:10 Point started: ret=0 09:03:10 point_skyscan result=0 09:03:11 Check angles 09:03:11 SkyScan query 09:03:12 SkyScan query done: ret=0 az=63.93<-4262 ze=-68.13<-16542 Statuses=0009 0009 09:03:12 Msec=0 True Az=63.93 Ze=-68.13 Az status=0009 Ze status=0009 09:03:12 Check angles 09:03:12 SkyScan query 09:03:12 SkyScan query done: ret=0 az=81.6<-5440 ze=-89.085<-17939 Statuses=0009 0009 09:03:12 Msec=750 True Az=81.6 Ze=-89.085 Az status=0009 Ze status=0009 09:03:13 Check angles 09:03:13 SkyScan query 09:03:13 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.025<-19335 Statuses=0009 0009 09:03:13 Msec=1500 True Az=99.12 Ze=-110.025 Az status=0009 Ze status=0009 09:03:13 Check angles 09:03:13 SkyScan query 09:03:14 SkyScan query done: ret=0 az=116.475<-7765 ze=-130.965<-20731 Statuses=0009 0009 09:03:14 Msec=2250 True Az=116.475 Ze=-130.965 Az status=0009 Ze status=0009 09:03:14 Check angles 09:03:14 SkyScan query 09:03:15 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 09:03:15 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 09:03:15 Check angles 09:03:15 SkyScan query 09:03:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:03:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:03:15 Message to Master queued w/err=0: serial=6315 error=0 09:03:20 Received message from Master: op=Filter serial=6316 09:03:20 Color wheel filter change from 0 to 0 09:03:20 FLIGetFilterPos err=0 currentPosition=0 09:03:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:03:20 Filter is already there-color wheel unchanged 09:03:21 Received message from Master: op=Shutter serial=6317 09:03:21 Shutter LASER close 09:03:21 Received message from Camera: op=State serial=6319 09:03:21 GetSingleValue result=40 Value=cccccccc 09:03:21 SkyScan query 09:03:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:03:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:21 Parameters OK 09:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:21 Set A/D data flow result=40 09:03:21 Set A/D channel type result=40 09:03:21 Set A/D encoding result=40 09:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:21 Set channel filter=0.000000e+000 result=40 09:03:21 Config A/D Result=40 09:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:21 Get A/D filter: -9.255963e+061 result=40 09:03:21 Get A/D value=-858993460 result=40 09:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:03:21 Parameters OK 09:03:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:03:21 Set A/D data flow result=40 09:03:21 Set A/D channel type result=40 09:03:21 Set A/D encoding result=40 09:03:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:03:21 Set channel filter=0.000000e+000 result=40 09:03:21 Config A/D Result=40 09:03:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:03:21 Get A/D filter: -9.255963e+061 result=40 09:03:21 Get A/D value=-858993460 result=40 09:03:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:03:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:03:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:03:21 Aux= 09:03:21 Message to Camera, serial 6319 queued 09:03:52 Received message from Master: op=PointingHead serial=6326 09:03:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:03:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:03:52 Point started: ret=0 09:03:52 point_skyscan result=0 09:03:53 Check angles 09:03:53 SkyScan query 09:03:54 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.315<-23421 Statuses=0009 0009 09:03:54 Msec=0 True Az=113.025 Ze=-171.315 Az status=0009 Ze status=0009 09:03:54 Check angles 09:03:54 SkyScan query 09:03:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:03:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:03:55 Message to Master queued w/err=0: serial=6326 error=0 09:04:00 Received message from Master: op=Filter serial=6327 09:04:00 Color wheel filter change from 0 to 0 09:04:00 FLIGetFilterPos err=0 currentPosition=0 09:04:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:00 Filter is already there-color wheel unchanged 09:04:00 Received message from Master: op=Shutter serial=6328 09:04:00 Shutter LASER open 09:04:00 Received message from Camera: op=State serial=6330 09:04:00 GetSingleValue result=40 Value=cccccccc 09:04:00 SkyScan query 09:04:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:04:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:00 Parameters OK 09:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:00 Set A/D data flow result=40 09:04:00 Set A/D channel type result=40 09:04:00 Set A/D encoding result=40 09:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:00 Set channel filter=0.000000e+000 result=40 09:04:00 Config A/D Result=40 09:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:00 Get A/D filter: -9.255963e+061 result=40 09:04:00 Get A/D value=-858993460 result=40 09:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:00 Parameters OK 09:04:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:00 Set A/D data flow result=40 09:04:00 Set A/D channel type result=40 09:04:00 Set A/D encoding result=40 09:04:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:00 Set channel filter=0.000000e+000 result=40 09:04:00 Config A/D Result=40 09:04:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:00 Get A/D filter: -9.255963e+061 result=40 09:04:00 Get A/D value=-858993460 result=40 09:04:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:00 Aux= 09:04:00 Message to Camera, serial 6330 queued 09:04:03 Received message from Master: op=Shutter serial=6334 09:04:03 Shutter LASER close 09:04:03 Received message from Master: op=PointingHead serial=6338 09:04:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:04:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:04:04 Point started: ret=0 09:04:04 point_skyscan result=0 09:04:05 Check angles 09:04:05 SkyScan query 09:04:05 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.13<-21542 Statuses=0009 0009 09:04:05 Msec=0 True Az=135.975 Ze=-143.13 Az status=0009 Ze status=0009 09:04:05 Check angles 09:04:05 SkyScan query 09:04:06 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.725<-20115 Statuses=0009 0009 09:04:06 Msec=750 True Az=153.9 Ze=-121.725 Az status=0009 Ze status=0009 09:04:06 Check angles 09:04:06 SkyScan query 09:04:07 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.785<-18719 Statuses=0009 0009 09:04:07 Msec=1500 True Az=171.405 Ze=-100.785 Az status=0009 Ze status=0009 09:04:07 Check angles 09:04:07 SkyScan query 09:04:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.83<-17322 Statuses=0008 0009 09:04:07 Msec=2250 True Az=176.025 Ze=-79.83 Az status=0008 Ze status=0009 09:04:08 Check angles 09:04:08 SkyScan query 09:04:08 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.86<-15924 Statuses=0008 0009 09:04:08 Msec=3000 True Az=176.01 Ze=-58.86 Az status=0008 Ze status=0009 09:04:08 Check angles 09:04:08 SkyScan query 09:04:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:04:09 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:04:09 Message to Master queued w/err=0: serial=6338 error=0 09:04:14 Received message from Master: op=Filter serial=6339 09:04:14 Color wheel filter change from 0 to 0 09:04:14 FLIGetFilterPos err=0 currentPosition=0 09:04:14 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:14 Filter is already there-color wheel unchanged 09:04:14 Received message from Master: op=Shutter serial=6340 09:04:14 Shutter LASER close 09:04:14 Received message from Camera: op=State serial=6342 09:04:14 GetSingleValue result=40 Value=cccccccc 09:04:14 SkyScan query 09:04:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:04:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:15 Parameters OK 09:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:15 Set A/D data flow result=40 09:04:15 Set A/D channel type result=40 09:04:15 Set A/D encoding result=40 09:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:15 Set channel filter=0.000000e+000 result=40 09:04:15 Config A/D Result=40 09:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:15 Get A/D filter: -9.255963e+061 result=40 09:04:15 Get A/D value=-858993460 result=40 09:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:15 Parameters OK 09:04:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:15 Set A/D data flow result=40 09:04:15 Set A/D channel type result=40 09:04:15 Set A/D encoding result=40 09:04:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:15 Set channel filter=0.000000e+000 result=40 09:04:15 Config A/D Result=40 09:04:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:15 Get A/D filter: -9.255963e+061 result=40 09:04:15 Get A/D value=-858993460 result=40 09:04:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:15 Aux= 09:04:15 Message to Camera, serial 6342 queued 09:04:46 Received message from Master: op=PointingHead serial=6349 09:04:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:04:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:04:46 Point started: ret=0 09:04:46 point_skyscan result=0 09:04:47 Check angles 09:04:47 SkyScan query 09:04:47 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.6<-13440 Statuses=0009 0009 09:04:47 Msec=0 True Az=152.94 Ze=-21.6 Az status=0009 Ze status=0009 09:04:48 Check angles 09:04:48 SkyScan query 09:04:48 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.63<-12042 Statuses=0009 0009 09:04:48 Msec=750 True Az=135.45 Ze=-0.63 Az status=0009 Ze status=0009 09:04:48 Check angles 09:04:48 SkyScan query 09:04:49 SkyScan query done: ret=0 az=117.825<-7855 ze=20.325<-10645 Statuses=0009 0009 09:04:49 Msec=1500 True Az=117.825 Ze=20.325 Az status=0009 Ze status=0009 09:04:49 Check angles 09:04:49 SkyScan query 09:04:50 SkyScan query done: ret=0 az=100.155<-6677 ze=41.7<-9220 Statuses=0009 0009 09:04:50 Msec=2250 True Az=100.155 Ze=41.7 Az status=0009 Ze status=0009 09:04:50 Check angles 09:04:50 SkyScan query 09:04:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 09:04:50 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 09:04:51 Check angles 09:04:51 SkyScan query 09:04:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:04:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:04:51 Message to Master queued w/err=0: serial=6349 error=0 09:04:56 Received message from Master: op=Filter serial=6350 09:04:56 Color wheel filter change from 0 to 0 09:04:56 FLIGetFilterPos err=0 currentPosition=0 09:04:56 FLIGetStepsRemaining err=0 RemainingSteps=0 09:04:56 Filter is already there-color wheel unchanged 09:04:56 Received message from Master: op=Shutter serial=6351 09:04:56 Shutter LASER close 09:04:56 Received message from Camera: op=State serial=6353 09:04:56 GetSingleValue result=40 Value=cccccccc 09:04:56 SkyScan query 09:04:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:04:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:57 Parameters OK 09:04:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:57 Set A/D data flow result=40 09:04:57 Set A/D channel type result=40 09:04:57 Set A/D encoding result=40 09:04:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:57 Set channel filter=0.000000e+000 result=40 09:04:57 Config A/D Result=40 09:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:57 Get A/D filter: -9.255963e+061 result=40 09:04:57 Get A/D value=-858993460 result=40 09:04:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:04:57 Parameters OK 09:04:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:04:57 Set A/D data flow result=40 09:04:57 Set A/D channel type result=40 09:04:57 Set A/D encoding result=40 09:04:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:04:57 Set channel filter=0.000000e+000 result=40 09:04:57 Config A/D Result=40 09:04:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:04:57 Get A/D filter: -9.255963e+061 result=40 09:04:57 Get A/D value=-858993460 result=40 09:04:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:04:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:04:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:04:57 Aux= 09:04:57 Message to Camera, serial 6353 queued 09:05:28 Received message from Master: op=PointingHead serial=6360 09:05:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:05:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:05:28 Point started: ret=0 09:05:28 point_skyscan result=0 09:05:29 Check angles 09:05:29 SkyScan query 09:05:30 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 09:05:30 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 09:05:30 Check angles 09:05:30 SkyScan query 09:05:30 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 09:05:30 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 09:05:30 Check angles 09:05:30 SkyScan query 09:05:31 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 09:05:31 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 09:05:31 Check angles 09:05:31 SkyScan query 09:05:32 SkyScan query done: ret=0 az=161.52<-10768 ze=38.505<-9433 Statuses=0009 0008 09:05:32 Msec=2250 True Az=161.52 Ze=38.505 Az status=0009 Ze status=0008 09:05:32 Check angles 09:05:32 SkyScan query 09:05:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 09:05:33 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 09:05:33 Check angles 09:05:33 SkyScan query 09:05:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:05:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:05:33 Message to Master queued w/err=0: serial=6360 error=0 09:05:38 Received message from Master: op=Filter serial=6361 09:05:38 Color wheel filter change from 0 to 0 09:05:38 FLIGetFilterPos err=0 currentPosition=0 09:05:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:05:38 Filter is already there-color wheel unchanged 09:05:38 Received message from Master: op=Shutter serial=6362 09:05:38 Shutter LASER close 09:05:39 Received message from Camera: op=State serial=6364 09:05:39 GetSingleValue result=40 Value=cccccccc 09:05:39 SkyScan query 09:05:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:05:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:39 Parameters OK 09:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:39 Set A/D data flow result=40 09:05:39 Set A/D channel type result=40 09:05:39 Set A/D encoding result=40 09:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:39 Set channel filter=0.000000e+000 result=40 09:05:39 Config A/D Result=40 09:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:39 Get A/D filter: -9.255963e+061 result=40 09:05:39 Get A/D value=-858993460 result=40 09:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:05:39 Parameters OK 09:05:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:05:39 Set A/D data flow result=40 09:05:39 Set A/D channel type result=40 09:05:39 Set A/D encoding result=40 09:05:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:05:39 Set channel filter=0.000000e+000 result=40 09:05:39 Config A/D Result=40 09:05:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:05:39 Get A/D filter: -9.255963e+061 result=40 09:05:39 Get A/D value=-858993460 result=40 09:05:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:05:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:05:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:05:39 Aux= 09:05:39 Message to Camera, serial 6364 queued 09:06:10 Received message from Master: op=PointingHead serial=6371 09:06:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:06:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:06:10 Point started: ret=0 09:06:10 point_skyscan result=0 09:06:11 Check angles 09:06:11 SkyScan query 09:06:12 SkyScan query done: ret=0 az=152.775<-10185 ze=8.535<-11431 Statuses=0009 0009 09:06:12 Msec=0 True Az=152.775 Ze=8.535 Az status=0009 Ze status=0009 09:06:12 Check angles 09:06:12 SkyScan query 09:06:12 SkyScan query done: ret=0 az=134.985<-8999 ze=-12.84<-12856 Statuses=0009 0009 09:06:12 Msec=750 True Az=134.985 Ze=-12.84 Az status=0009 Ze status=0009 09:06:13 Check angles 09:06:13 SkyScan query 09:06:13 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.765<-14251 Statuses=0009 0009 09:06:13 Msec=1500 True Az=117.39 Ze=-33.765 Az status=0009 Ze status=0009 09:06:13 Check angles 09:06:13 SkyScan query 09:06:14 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.54<-15436 Statuses=0009 0009 09:06:14 Msec=2250 True Az=100.02 Ze=-51.54 Az status=0009 Ze status=0009 09:06:14 Check angles 09:06:14 SkyScan query 09:06:15 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:06:15 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:06:15 Check angles 09:06:15 SkyScan query 09:06:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:06:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:06:15 Message to Master queued w/err=0: serial=6371 error=0 09:06:20 Received message from Master: op=Filter serial=6372 09:06:20 Color wheel filter change from 0 to 0 09:06:20 FLIGetFilterPos err=0 currentPosition=0 09:06:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:06:20 Filter is already there-color wheel unchanged 09:06:21 Received message from Master: op=Shutter serial=6373 09:06:21 Shutter LASER close 09:06:21 Received message from Camera: op=State serial=6375 09:06:21 GetSingleValue result=40 Value=cccccccc 09:06:21 SkyScan query 09:06:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:06:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:21 Parameters OK 09:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:21 Set A/D data flow result=40 09:06:21 Set A/D channel type result=40 09:06:21 Set A/D encoding result=40 09:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:21 Set channel filter=0.000000e+000 result=40 09:06:21 Config A/D Result=40 09:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:21 Get A/D filter: -9.255963e+061 result=40 09:06:21 Get A/D value=-858993460 result=40 09:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:06:21 Parameters OK 09:06:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:06:21 Set A/D data flow result=40 09:06:21 Set A/D channel type result=40 09:06:21 Set A/D encoding result=40 09:06:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:06:21 Set channel filter=0.000000e+000 result=40 09:06:21 Config A/D Result=40 09:06:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:06:21 Get A/D filter: -9.255963e+061 result=40 09:06:21 Get A/D value=-858993460 result=40 09:06:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:06:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:06:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:06:21 Aux= 09:06:21 Message to Camera, serial 6375 queued 09:06:52 Received message from Master: op=PointingHead serial=6382 09:06:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:06:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:06:52 Point started: ret=0 09:06:52 point_skyscan result=0 09:06:53 Check angles 09:06:53 SkyScan query 09:06:54 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.42<-17428 Statuses=0009 0009 09:06:54 Msec=0 True Az=109.17 Ze=-81.42 Az status=0009 Ze status=0009 09:06:54 Check angles 09:06:54 SkyScan query 09:06:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.375<-18825 Statuses=0008 0009 09:06:54 Msec=750 True Az=113.01 Ze=-102.375 Az status=0008 Ze status=0009 09:06:55 Check angles 09:06:55 SkyScan query 09:06:55 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.75<-20250 Statuses=0008 0009 09:06:55 Msec=1500 True Az=113.01 Ze=-123.75 Az status=0008 Ze status=0009 09:06:55 Check angles 09:06:55 SkyScan query 09:06:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.705<-21647 Statuses=0008 0009 09:06:56 Msec=2250 True Az=112.995 Ze=-144.705 Az status=0008 Ze status=0009 09:06:56 Check angles 09:06:56 SkyScan query 09:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 09:06:57 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 09:06:57 Check angles 09:06:57 SkyScan query 09:06:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:06:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:06:57 Message to Master queued w/err=0: serial=6382 error=0 09:07:02 Received message from Master: op=Filter serial=6383 09:07:02 Color wheel filter change from 0 to 0 09:07:02 FLIGetFilterPos err=0 currentPosition=0 09:07:02 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:02 Filter is already there-color wheel unchanged 09:07:03 Received message from Master: op=Shutter serial=6384 09:07:03 Shutter LASER open 09:07:03 Received message from Camera: op=State serial=6386 09:07:03 GetSingleValue result=40 Value=cccccccc 09:07:03 SkyScan query 09:07:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:07:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:03 Parameters OK 09:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:03 Set A/D data flow result=40 09:07:03 Set A/D channel type result=40 09:07:03 Set A/D encoding result=40 09:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:03 Set channel filter=0.000000e+000 result=40 09:07:03 Config A/D Result=40 09:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:03 Get A/D filter: -9.255963e+061 result=40 09:07:03 Get A/D value=-858993460 result=40 09:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:03 Parameters OK 09:07:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:03 Set A/D data flow result=40 09:07:03 Set A/D channel type result=40 09:07:03 Set A/D encoding result=40 09:07:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:03 Set channel filter=0.000000e+000 result=40 09:07:03 Config A/D Result=40 09:07:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:03 Get A/D filter: -9.255963e+061 result=40 09:07:03 Get A/D value=-858993460 result=40 09:07:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:03 Aux= 09:07:03 Message to Camera, serial 6386 queued 09:07:06 Received message from Master: op=Shutter serial=6390 09:07:06 Shutter LASER close 09:07:06 Received message from Master: op=PointingHead serial=6394 09:07:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:07:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:07:07 Point started: ret=0 09:07:07 point_skyscan result=0 09:07:07 Check angles 09:07:07 SkyScan query 09:07:08 SkyScan query done: ret=0 az=89.55<-5970 ze=156.84<-1544 Statuses=0009 0009 09:07:08 Msec=0 True Az=89.55 Ze=156.84 Az status=0009 Ze status=0009 09:07:08 Check angles 09:07:08 SkyScan query 09:07:09 SkyScan query done: ret=0 az=71.58<-4772 ze=135.39<-2974 Statuses=0009 0009 09:07:09 Msec=750 True Az=71.58 Ze=135.39 Az status=0009 Ze status=0009 09:07:09 Check angles 09:07:09 SkyScan query 09:07:09 SkyScan query done: ret=0 az=54.435<-3629 ze=114.48<-4368 Statuses=0009 0009 09:07:09 Msec=1500 True Az=54.435 Ze=114.48 Az status=0009 Ze status=0009 09:07:10 Check angles 09:07:10 SkyScan query 09:07:10 SkyScan query done: ret=0 az=41.04<-2736 ze=93.075<-5795 Statuses=0009 0009 09:07:10 Msec=2250 True Az=41.04 Ze=93.075 Az status=0009 Ze status=0009 09:07:10 Check angles 09:07:10 SkyScan query 09:07:11 SkyScan query done: ret=0 az=40.995<-2733 ze=71.715<-7219 Statuses=0008 0009 09:07:11 Msec=3000 True Az=40.995 Ze=71.715 Az status=0008 Ze status=0009 09:07:11 Check angles 09:07:11 SkyScan query 09:07:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.81<-8546 Statuses=0008 0009 09:07:12 Msec=3750 True Az=40.995 Ze=51.81 Az status=0008 Ze status=0009 09:07:12 Check angles 09:07:12 SkyScan query 09:07:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:07:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:07:13 Message to Master queued w/err=0: serial=6394 error=0 09:07:18 Received message from Master: op=Filter serial=6395 09:07:18 Color wheel filter change from 0 to 0 09:07:18 FLIGetFilterPos err=0 currentPosition=0 09:07:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:07:18 Filter is already there-color wheel unchanged 09:07:18 Received message from Master: op=Shutter serial=6396 09:07:18 Shutter LASER close 09:07:18 Received message from Camera: op=State serial=6398 09:07:18 GetSingleValue result=40 Value=cccccccc 09:07:18 SkyScan query 09:07:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:07:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:18 Parameters OK 09:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:18 Set A/D data flow result=40 09:07:18 Set A/D channel type result=40 09:07:18 Set A/D encoding result=40 09:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:18 Set channel filter=0.000000e+000 result=40 09:07:18 Config A/D Result=40 09:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:18 Get A/D filter: -9.255963e+061 result=40 09:07:18 Get A/D value=-858993460 result=40 09:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:07:18 Parameters OK 09:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:07:18 Set A/D data flow result=40 09:07:18 Set A/D channel type result=40 09:07:18 Set A/D encoding result=40 09:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:07:18 Set channel filter=0.000000e+000 result=40 09:07:18 Config A/D Result=40 09:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:07:18 Get A/D filter: -9.255963e+061 result=40 09:07:18 Get A/D value=-858993460 result=40 09:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:07:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:07:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:07:18 Aux= 09:07:18 Message to Camera, serial 6398 queued 09:07:49 Received message from Master: op=PointingHead serial=6405 09:07:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:07:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:07:50 Point started: ret=0 09:07:50 point_skyscan result=0 09:07:50 Check angles 09:07:50 SkyScan query 09:07:51 SkyScan query done: ret=0 az=63.81<-4254 ze=66.54<-7564 Statuses=0009 0008 09:07:51 Msec=0 True Az=63.81 Ze=66.54 Az status=0009 Ze status=0008 09:07:51 Check angles 09:07:51 SkyScan query 09:07:52 SkyScan query done: ret=0 az=81.615<-5441 ze=66.51<-7566 Statuses=0009 0008 09:07:52 Msec=750 True Az=81.615 Ze=66.51 Az status=0009 Ze status=0008 09:07:52 Check angles 09:07:52 SkyScan query 09:07:52 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 09:07:52 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 09:07:53 Check angles 09:07:53 SkyScan query 09:07:53 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 09:07:53 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 09:07:53 Check angles 09:07:53 SkyScan query 09:07:54 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 09:07:54 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 09:07:54 Check angles 09:07:54 SkyScan query 09:07:55 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 09:07:55 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 09:07:55 Check angles 09:07:55 SkyScan query 09:07:56 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:07:56 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:07:56 Message to Master queued w/err=0: serial=6405 error=0 09:08:01 Received message from Master: op=Filter serial=6406 09:08:01 Color wheel filter change from 0 to 0 09:08:01 FLIGetFilterPos err=0 currentPosition=0 09:08:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:01 Filter is already there-color wheel unchanged 09:08:01 Received message from Master: op=Shutter serial=6407 09:08:01 Shutter LASER close 09:08:01 Received message from Camera: op=State serial=6409 09:08:01 GetSingleValue result=40 Value=cccccccc 09:08:01 SkyScan query 09:08:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:08:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:01 Parameters OK 09:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:01 Set A/D data flow result=40 09:08:01 Set A/D channel type result=40 09:08:01 Set A/D encoding result=40 09:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:01 Set channel filter=0.000000e+000 result=40 09:08:01 Config A/D Result=40 09:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:01 Get A/D filter: -9.255963e+061 result=40 09:08:01 Get A/D value=-858993460 result=40 09:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:01 Parameters OK 09:08:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:01 Set A/D data flow result=40 09:08:01 Set A/D channel type result=40 09:08:01 Set A/D encoding result=40 09:08:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:01 Set channel filter=0.000000e+000 result=40 09:08:01 Config A/D Result=40 09:08:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:01 Get A/D filter: -9.255963e+061 result=40 09:08:01 Get A/D value=-858993460 result=40 09:08:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:01 Aux= 09:08:01 Message to Camera, serial 6409 queued 09:08:32 Received message from Master: op=PointingHead serial=6416 09:08:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:08:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:08:32 Point started: ret=0 09:08:32 point_skyscan result=0 09:08:33 Check angles 09:08:33 SkyScan query 09:08:34 SkyScan query done: ret=0 az=135.3<-9020 ze=36.99<-9534 Statuses=0009 0009 09:08:34 Msec=0 True Az=135.3 Ze=36.99 Az status=0009 Ze status=0009 09:08:34 Check angles 09:08:34 SkyScan query 09:08:35 SkyScan query done: ret=0 az=117.765<-7851 ze=16.02<-10932 Statuses=0009 0009 09:08:35 Msec=750 True Az=117.765 Ze=16.02 Az status=0009 Ze status=0009 09:08:35 Check angles 09:08:35 SkyScan query 09:08:35 SkyScan query done: ret=0 az=100.365<-6691 ze=-5.025<-12335 Statuses=0009 0009 09:08:35 Msec=1500 True Az=100.365 Ze=-5.025 Az status=0009 Ze status=0009 09:08:36 Check angles 09:08:36 SkyScan query 09:08:36 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.34<-13756 Statuses=0009 0009 09:08:36 Msec=2250 True Az=82.485 Ze=-26.34 Az status=0009 Ze status=0009 09:08:36 Check angles 09:08:36 SkyScan query 09:08:37 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.565<-14571 Statuses=0009 0008 09:08:37 Msec=3000 True Az=64.665 Ze=-38.565 Az status=0009 Ze status=0008 09:08:37 Check angles 09:08:37 SkyScan query 09:08:38 SkyScan query done: ret=0 az=47.25<-3150 ze=-38.535<-14569 Statuses=0009 0008 09:08:38 Msec=3750 True Az=47.25 Ze=-38.535 Az status=0009 Ze status=0008 09:08:38 Check angles 09:08:38 SkyScan query 09:08:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:08:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:08:38 Message to Master queued w/err=0: serial=6416 error=0 09:08:43 Received message from Master: op=Filter serial=6417 09:08:43 Color wheel filter change from 0 to 0 09:08:43 FLIGetFilterPos err=0 currentPosition=0 09:08:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:08:43 Filter is already there-color wheel unchanged 09:08:44 Received message from Master: op=Shutter serial=6418 09:08:44 Shutter LASER close 09:08:44 Received message from Camera: op=State serial=6420 09:08:44 GetSingleValue result=40 Value=cccccccc 09:08:44 SkyScan query 09:08:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:08:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:44 Parameters OK 09:08:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:44 Set A/D data flow result=40 09:08:44 Set A/D channel type result=40 09:08:44 Set A/D encoding result=40 09:08:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:44 Set channel filter=0.000000e+000 result=40 09:08:44 Config A/D Result=40 09:08:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:44 Get A/D filter: -9.255963e+061 result=40 09:08:44 Get A/D value=-858993460 result=40 09:08:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:08:44 Parameters OK 09:08:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:08:44 Set A/D data flow result=40 09:08:44 Set A/D channel type result=40 09:08:44 Set A/D encoding result=40 09:08:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:08:44 Set channel filter=0.000000e+000 result=40 09:08:44 Config A/D Result=40 09:08:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:08:44 Get A/D filter: -9.255963e+061 result=40 09:08:44 Get A/D value=-858993460 result=40 09:08:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:08:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:08:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:08:44 Aux= 09:08:44 Message to Camera, serial 6420 queued 09:09:15 Received message from Master: op=PointingHead serial=6427 09:09:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:09:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:09:15 Point started: ret=0 09:09:15 point_skyscan result=0 09:09:16 Check angles 09:09:16 SkyScan query 09:09:17 SkyScan query done: ret=0 az=64.44<-4296 ze=-68.775<-16585 Statuses=0009 0009 09:09:17 Msec=0 True Az=64.44 Ze=-68.775 Az status=0009 Ze status=0009 09:09:17 Check angles 09:09:17 SkyScan query 09:09:17 SkyScan query done: ret=0 az=82.59<-5506 ze=-90.18<-18012 Statuses=0009 0009 09:09:17 Msec=750 True Az=82.59 Ze=-90.18 Az status=0009 Ze status=0009 09:09:18 Check angles 09:09:18 SkyScan query 09:09:18 SkyScan query done: ret=0 az=99.855<-6657 ze=-111.135<-19409 Statuses=0009 0009 09:09:18 Msec=1500 True Az=99.855 Ze=-111.135 Az status=0009 Ze status=0009 09:09:18 Check angles 09:09:18 SkyScan query 09:09:19 SkyScan query done: ret=0 az=117.36<-7824 ze=-132.075<-20805 Statuses=0009 0009 09:09:19 Msec=2250 True Az=117.36 Ze=-132.075 Az status=0009 Ze status=0009 09:09:19 Check angles 09:09:19 SkyScan query 09:09:20 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 09:09:20 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 09:09:20 Check angles 09:09:20 SkyScan query 09:09:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:09:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:09:20 Message to Master queued w/err=0: serial=6427 error=0 09:09:25 Received message from Master: op=Filter serial=6428 09:09:25 Color wheel filter change from 0 to 0 09:09:25 FLIGetFilterPos err=0 currentPosition=0 09:09:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:09:25 Filter is already there-color wheel unchanged 09:09:26 Received message from Master: op=Shutter serial=6429 09:09:26 Shutter LASER close 09:09:26 Received message from Camera: op=State serial=6431 09:09:26 GetSingleValue result=40 Value=cccccccc 09:09:26 SkyScan query 09:09:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:26 Parameters OK 09:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:26 Set A/D data flow result=40 09:09:26 Set A/D channel type result=40 09:09:26 Set A/D encoding result=40 09:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:26 Set channel filter=0.000000e+000 result=40 09:09:26 Config A/D Result=40 09:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:26 Get A/D filter: -9.255963e+061 result=40 09:09:26 Get A/D value=-858993460 result=40 09:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:09:26 Parameters OK 09:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:09:26 Set A/D data flow result=40 09:09:26 Set A/D channel type result=40 09:09:26 Set A/D encoding result=40 09:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:09:26 Set channel filter=0.000000e+000 result=40 09:09:26 Config A/D Result=40 09:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:09:26 Get A/D filter: -9.255963e+061 result=40 09:09:26 Get A/D value=-858993460 result=40 09:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-4 09:09:26] 09:09:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:09:26 Aux= 09:09:26 Message to Camera, serial 6431 queued 09:09:57 Received message from Master: op=PointingHead serial=6438 09:09:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:09:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:09:57 Point started: ret=0 09:09:57 point_skyscan result=0 09:09:58 Check angles 09:09:58 SkyScan query 09:09:59 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.18<-23412 Statuses=0009 0009 09:09:59 Msec=0 True Az=113.025 Ze=-171.18 Az status=0009 Ze status=0009 09:09:59 Check angles 09:09:59 SkyScan query 09:10:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:10:00 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:10:00 Message to Master queued w/err=0: serial=6438 error=0 09:10:05 Received message from Master: op=Filter serial=6439 09:10:05 Color wheel filter change from 0 to 0 09:10:05 FLIGetFilterPos err=0 currentPosition=0 09:10:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:05 Filter is already there-color wheel unchanged 09:10:05 Received message from Master: op=Shutter serial=6440 09:10:05 Shutter LASER open 09:10:05 Received message from Camera: op=State serial=6442 09:10:05 GetSingleValue result=40 Value=cccccccc 09:10:05 SkyScan query 09:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:05 Parameters OK 09:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:05 Set A/D data flow result=40 09:10:05 Set A/D channel type result=40 09:10:05 Set A/D encoding result=40 09:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:05 Set channel filter=0.000000e+000 result=40 09:10:05 Config A/D Result=40 09:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:05 Get A/D filter: -9.255963e+061 result=40 09:10:05 Get A/D value=-858993460 result=40 09:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:05 Parameters OK 09:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:05 Set A/D data flow result=40 09:10:05 Set A/D channel type result=40 09:10:05 Set A/D encoding result=40 09:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:05 Set channel filter=0.000000e+000 result=40 09:10:05 Config A/D Result=40 09:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:05 Get A/D filter: -9.255963e+061 result=40 09:10:05 Get A/D value=-858993460 result=40 09:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:05 Aux= 09:10:05 Message to Camera, serial 6442 queued 09:10:08 Received message from Master: op=Shutter serial=6446 09:10:08 Shutter LASER close 09:10:09 Received message from Master: op=PointingHead serial=6450 09:10:09 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:10:09 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:10:09 Point started: ret=0 09:10:09 point_skyscan result=0 09:10:10 Check angles 09:10:10 SkyScan query 09:10:10 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.86<-21524 Statuses=0009 0009 09:10:10 Msec=0 True Az=136.17 Ze=-142.86 Az status=0009 Ze status=0009 09:10:10 Check angles 09:10:10 SkyScan query 09:10:11 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.905<-20127 Statuses=0009 0009 09:10:11 Msec=750 True Az=153.735 Ze=-121.905 Az status=0009 Ze status=0009 09:10:11 Check angles 09:10:11 SkyScan query 09:10:12 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.53<-18702 Statuses=0009 0009 09:10:12 Msec=1500 True Az=171.555 Ze=-100.53 Az status=0009 Ze status=0009 09:10:12 Check angles 09:10:12 SkyScan query 09:10:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.575<-17305 Statuses=0008 0009 09:10:13 Msec=2250 True Az=176.01 Ze=-79.575 Az status=0008 Ze status=0009 09:10:13 Check angles 09:10:13 SkyScan query 09:10:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.605<-15907 Statuses=0008 0009 09:10:13 Msec=3000 True Az=175.995 Ze=-58.605 Az status=0008 Ze status=0009 09:10:13 Check angles 09:10:13 SkyScan query 09:10:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:10:14 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:10:14 Message to Master queued w/err=0: serial=6450 error=0 09:10:19 Received message from Master: op=Filter serial=6451 09:10:19 Color wheel filter change from 0 to 0 09:10:19 FLIGetFilterPos err=0 currentPosition=0 09:10:19 FLIGetStepsRemaining err=0 RemainingSteps=0 09:10:19 Filter is already there-color wheel unchanged 09:10:19 Received message from Master: op=Shutter serial=6452 09:10:19 Shutter LASER close 09:10:19 Received message from Camera: op=State serial=6454 09:10:19 GetSingleValue result=40 Value=cccccccc 09:10:19 SkyScan query 09:10:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:10:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:20 Parameters OK 09:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:20 Set A/D data flow result=40 09:10:20 Set A/D channel type result=40 09:10:20 Set A/D encoding result=40 09:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:20 Set channel filter=0.000000e+000 result=40 09:10:20 Config A/D Result=40 09:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:20 Get A/D filter: -9.255963e+061 result=40 09:10:20 Get A/D value=-858993460 result=40 09:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:10:20 Parameters OK 09:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:10:20 Set A/D data flow result=40 09:10:20 Set A/D channel type result=40 09:10:20 Set A/D encoding result=40 09:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:10:20 Set channel filter=0.000000e+000 result=40 09:10:20 Config A/D Result=40 09:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:10:20 Get A/D filter: -9.255963e+061 result=40 09:10:20 Get A/D value=-858993460 result=40 09:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:10:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:10:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:10:20 Aux= 09:10:20 Message to Camera, serial 6454 queued 09:10:51 Received message from Master: op=PointingHead serial=6461 09:10:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:10:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:10:51 Point started: ret=0 09:10:51 point_skyscan result=0 09:10:52 Check angles 09:10:52 SkyScan query 09:10:52 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.48<-13432 Statuses=0009 0009 09:10:52 Msec=0 True Az=152.76 Ze=-21.48 Az status=0009 Ze status=0009 09:10:53 Check angles 09:10:53 SkyScan query 09:10:53 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.54<-12036 Statuses=0009 0009 09:10:53 Msec=750 True Az=135.345 Ze=-0.54 Az status=0009 Ze status=0009 09:10:53 Check angles 09:10:53 SkyScan query 09:10:54 SkyScan query done: ret=0 az=117.795<-7853 ze=20.445<-10637 Statuses=0009 0009 09:10:54 Msec=1500 True Az=117.795 Ze=20.445 Az status=0009 Ze status=0009 09:10:54 Check angles 09:10:54 SkyScan query 09:10:55 SkyScan query done: ret=0 az=100.365<-6691 ze=41.4<-9240 Statuses=0009 0009 09:10:55 Msec=2250 True Az=100.365 Ze=41.4 Az status=0009 Ze status=0009 09:10:55 Check angles 09:10:55 SkyScan query 09:10:56 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 09:10:56 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 09:10:56 Check angles 09:10:56 SkyScan query 09:10:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:10:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:10:56 Message to Master queued w/err=0: serial=6461 error=0 09:11:01 Received message from Master: op=Filter serial=6462 09:11:01 Color wheel filter change from 0 to 0 09:11:01 FLIGetFilterPos err=0 currentPosition=0 09:11:01 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:01 Filter is already there-color wheel unchanged 09:11:01 Received message from Master: op=Shutter serial=6463 09:11:01 Shutter LASER close 09:11:01 Received message from Camera: op=State serial=6465 09:11:01 GetSingleValue result=40 Value=cccccccc 09:11:01 SkyScan query 09:11:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:11:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:02 Parameters OK 09:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:02 Set A/D data flow result=40 09:11:02 Set A/D channel type result=40 09:11:02 Set A/D encoding result=40 09:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:02 Set channel filter=0.000000e+000 result=40 09:11:02 Config A/D Result=40 09:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:02 Get A/D filter: -9.255963e+061 result=40 09:11:02 Get A/D value=-858993460 result=40 09:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:02 Parameters OK 09:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:02 Set A/D data flow result=40 09:11:02 Set A/D channel type result=40 09:11:02 Set A/D encoding result=40 09:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:02 Set channel filter=0.000000e+000 result=40 09:11:02 Config A/D Result=40 09:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:02 Get A/D filter: -9.255963e+061 result=40 09:11:02 Get A/D value=-858993460 result=40 09:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:02 Aux= 09:11:02 Message to Camera, serial 6465 queued 09:11:33 Received message from Master: op=PointingHead serial=6472 09:11:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:11:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:11:33 Point started: ret=0 09:11:33 point_skyscan result=0 09:11:34 Check angles 09:11:34 SkyScan query 09:11:35 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 09:11:35 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 09:11:35 Check angles 09:11:35 SkyScan query 09:11:35 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 09:11:35 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 09:11:36 Check angles 09:11:36 SkyScan query 09:11:36 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 09:11:36 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 09:11:36 Check angles 09:11:36 SkyScan query 09:11:37 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 09:11:37 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 09:11:37 Check angles 09:11:37 SkyScan query 09:11:38 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:11:38 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:11:38 Check angles 09:11:38 SkyScan query 09:11:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:11:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:11:38 Message to Master queued w/err=0: serial=6472 error=0 09:11:43 Received message from Master: op=Filter serial=6473 09:11:43 Color wheel filter change from 0 to 0 09:11:43 FLIGetFilterPos err=0 currentPosition=0 09:11:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:11:43 Filter is already there-color wheel unchanged 09:11:44 Received message from Master: op=Shutter serial=6474 09:11:44 Shutter LASER close 09:11:44 Received message from Camera: op=State serial=6476 09:11:44 GetSingleValue result=40 Value=cccccccc 09:11:44 SkyScan query 09:11:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:11:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:44 Parameters OK 09:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:44 Set A/D data flow result=40 09:11:44 Set A/D channel type result=40 09:11:44 Set A/D encoding result=40 09:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:44 Set channel filter=0.000000e+000 result=40 09:11:44 Config A/D Result=40 09:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:44 Get A/D filter: -9.255963e+061 result=40 09:11:44 Get A/D value=-858993460 result=40 09:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:11:44 Parameters OK 09:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:11:44 Set A/D data flow result=40 09:11:44 Set A/D channel type result=40 09:11:44 Set A/D encoding result=40 09:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:11:44 Set channel filter=0.000000e+000 result=40 09:11:44 Config A/D Result=40 09:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:11:44 Get A/D filter: -9.255963e+061 result=40 09:11:44 Get A/D value=-858993460 result=40 09:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:11:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:11:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:11:44 Aux= 09:11:44 Message to Camera, serial 6476 queued [UTC 2018-12-4 09:12:09] 09:12:15 Received message from Master: op=PointingHead serial=6483 09:12:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:12:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:12:15 Point started: ret=0 09:12:15 point_skyscan result=0 09:12:16 Check angles 09:12:16 SkyScan query 09:12:17 SkyScan query done: ret=0 az=153.12<-10208 ze=8.805<-11413 Statuses=0009 0009 09:12:17 Msec=0 True Az=153.12 Ze=8.805 Az status=0009 Ze status=0009 09:12:17 Check angles 09:12:17 SkyScan query 09:12:17 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.12<-12808 Statuses=0009 0009 09:12:17 Msec=750 True Az=135.705 Ze=-12.12 Az status=0009 Ze status=0009 09:12:18 Check angles 09:12:18 SkyScan query 09:12:18 SkyScan query done: ret=0 az=118.17<-7878 ze=-33.09<-14206 Statuses=0009 0009 09:12:18 Msec=1500 True Az=118.17 Ze=-33.09 Az status=0009 Ze status=0009 09:12:18 Check angles 09:12:18 SkyScan query 09:12:19 SkyScan query done: ret=0 az=100.74<-6716 ze=-51.51<-15434 Statuses=0009 0009 09:12:19 Msec=2250 True Az=100.74 Ze=-51.51 Az status=0009 Ze status=0009 09:12:19 Check angles 09:12:19 SkyScan query 09:12:20 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:12:20 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:12:20 Check angles 09:12:20 SkyScan query 09:12:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 09:12:20 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 09:12:20 Message to Master queued w/err=0: serial=6483 error=0 09:12:25 Received message from Master: op=Filter serial=6484 09:12:25 Color wheel filter change from 0 to 0 09:12:25 FLIGetFilterPos err=0 currentPosition=0 09:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:12:25 Filter is already there-color wheel unchanged 09:12:26 Received message from Master: op=Shutter serial=6485 09:12:26 Shutter LASER close 09:12:26 Received message from Camera: op=State serial=6487 09:12:26 GetSingleValue result=40 Value=cccccccc 09:12:26 SkyScan query 09:12:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:26 Parameters OK 09:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:26 Set A/D data flow result=40 09:12:26 Set A/D channel type result=40 09:12:26 Set A/D encoding result=40 09:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:26 Set channel filter=0.000000e+000 result=40 09:12:26 Config A/D Result=40 09:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:26 Get A/D filter: -9.255963e+061 result=40 09:12:26 Get A/D value=-858993460 result=40 09:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:12:26 Parameters OK 09:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:12:26 Set A/D data flow result=40 09:12:26 Set A/D channel type result=40 09:12:26 Set A/D encoding result=40 09:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:12:26 Set channel filter=0.000000e+000 result=40 09:12:26 Config A/D Result=40 09:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:12:26 Get A/D filter: -9.255963e+061 result=40 09:12:26 Get A/D value=-858993460 result=40 09:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:12:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:12:26 Aux= 09:12:26 Message to Camera, serial 6487 queued 09:12:57 Received message from Master: op=PointingHead serial=6494 09:12:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:12:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:12:57 Point started: ret=0 09:12:57 point_skyscan result=0 09:12:58 Check angles 09:12:58 SkyScan query 09:12:59 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.81<-17454 Statuses=0009 0009 09:12:59 Msec=0 True Az=109.38 Ze=-81.81 Az status=0009 Ze status=0009 09:12:59 Check angles 09:12:59 SkyScan query 09:12:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.75<-18850 Statuses=0008 0009 09:12:59 Msec=750 True Az=113.01 Ze=-102.75 Az status=0008 Ze status=0009 09:13:00 Check angles 09:13:00 SkyScan query 09:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 09:13:00 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 09:13:00 Check angles 09:13:00 SkyScan query 09:13:01 SkyScan query done: ret=0 az=113.01<-7534 ze=-145.545<-21703 Statuses=0008 0009 09:13:01 Msec=2250 True Az=113.01 Ze=-145.545 Az status=0008 Ze status=0009 09:13:01 Check angles 09:13:01 SkyScan query 09:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.935<-23129 Statuses=0008 0009 09:13:02 Msec=3000 True Az=112.995 Ze=-166.935 Az status=0008 Ze status=0009 09:13:02 Check angles 09:13:02 SkyScan query 09:13:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:13:03 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:13:03 Message to Master queued w/err=0: serial=6494 error=0 09:13:08 Received message from Master: op=Filter serial=6495 09:13:08 Color wheel filter change from 0 to 0 09:13:08 FLIGetFilterPos err=0 currentPosition=0 09:13:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:08 Filter is already there-color wheel unchanged 09:13:08 Received message from Master: op=Shutter serial=6496 09:13:08 Shutter LASER open 09:13:08 Received message from Camera: op=State serial=6498 09:13:08 GetSingleValue result=40 Value=cccccccc 09:13:08 SkyScan query 09:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:08 Parameters OK 09:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:08 Set A/D data flow result=40 09:13:08 Set A/D channel type result=40 09:13:08 Set A/D encoding result=40 09:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:08 Set channel filter=0.000000e+000 result=40 09:13:08 Config A/D Result=40 09:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:08 Get A/D filter: -9.255963e+061 result=40 09:13:08 Get A/D value=-858993460 result=40 09:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:08 Parameters OK 09:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:08 Set A/D data flow result=40 09:13:08 Set A/D channel type result=40 09:13:08 Set A/D encoding result=40 09:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:08 Set channel filter=0.000000e+000 result=40 09:13:08 Config A/D Result=40 09:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:08 Get A/D filter: -9.255963e+061 result=40 09:13:08 Get A/D value=-858993460 result=40 09:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:08 Aux= 09:13:08 Message to Camera, serial 6498 queued 09:13:11 Received message from Master: op=Shutter serial=6502 09:13:11 Shutter LASER close 09:13:11 Received message from Master: op=PointingHead serial=6506 09:13:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:13:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:13:12 Point started: ret=0 09:13:12 point_skyscan result=0 09:13:12 Check angles 09:13:12 SkyScan query 09:13:13 SkyScan query done: ret=0 az=89.655<-5977 ze=156.93<-1538 Statuses=0009 0009 09:13:13 Msec=0 True Az=89.655 Ze=156.93 Az status=0009 Ze status=0009 09:13:13 Check angles 09:13:13 SkyScan query 09:13:14 SkyScan query done: ret=0 az=72.18<-4812 ze=135.945<-2937 Statuses=0009 0009 09:13:14 Msec=750 True Az=72.18 Ze=135.945 Az status=0009 Ze status=0009 09:13:14 Check angles 09:13:14 SkyScan query 09:13:15 SkyScan query done: ret=0 az=54.825<-3655 ze=115.02<-4332 Statuses=0009 0009 09:13:15 Msec=1500 True Az=54.825 Ze=115.02 Az status=0009 Ze status=0009 09:13:15 Check angles 09:13:15 SkyScan query 09:13:15 SkyScan query done: ret=0 az=40.845<-2723 ze=94.065<-5729 Statuses=0009 0009 09:13:15 Msec=2250 True Az=40.845 Ze=94.065 Az status=0009 Ze status=0009 09:13:15 Check angles 09:13:15 SkyScan query 09:13:16 SkyScan query done: ret=0 az=41.01<-2734 ze=73.095<-7127 Statuses=0008 0009 09:13:16 Msec=3000 True Az=41.01 Ze=73.095 Az status=0008 Ze status=0009 09:13:16 Check angles 09:13:16 SkyScan query 09:13:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.635<-8491 Statuses=0008 0009 09:13:17 Msec=3750 True Az=40.995 Ze=52.635 Az status=0008 Ze status=0009 09:13:17 Check angles 09:13:17 SkyScan query 09:13:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:13:18 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:13:18 Message to Master queued w/err=0: serial=6506 error=0 09:13:23 Received message from Master: op=Filter serial=6507 09:13:23 Color wheel filter change from 0 to 0 09:13:23 FLIGetFilterPos err=0 currentPosition=0 09:13:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:13:23 Filter is already there-color wheel unchanged 09:13:23 Received message from Master: op=Shutter serial=6508 09:13:23 Shutter LASER close 09:13:23 Received message from Camera: op=State serial=6510 09:13:23 GetSingleValue result=40 Value=cccccccc 09:13:23 SkyScan query 09:13:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:13:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:23 Parameters OK 09:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:23 Set A/D data flow result=40 09:13:23 Set A/D channel type result=40 09:13:23 Set A/D encoding result=40 09:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:23 Set channel filter=0.000000e+000 result=40 09:13:23 Config A/D Result=40 09:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:23 Get A/D filter: -9.255963e+061 result=40 09:13:23 Get A/D value=-858993460 result=40 09:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:13:23 Parameters OK 09:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:13:23 Set A/D data flow result=40 09:13:23 Set A/D channel type result=40 09:13:23 Set A/D encoding result=40 09:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:13:23 Set channel filter=0.000000e+000 result=40 09:13:23 Config A/D Result=40 09:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:13:23 Get A/D filter: -9.255963e+061 result=40 09:13:23 Get A/D value=-858993460 result=40 09:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:13:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:13:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:13:23 Aux= 09:13:23 Message to Camera, serial 6510 queued 09:13:54 Received message from Master: op=PointingHead serial=6517 09:13:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:13:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:13:55 Point started: ret=0 09:13:55 point_skyscan result=0 09:13:55 Check angles 09:13:55 SkyScan query 09:13:56 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 09:13:56 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 09:13:56 Check angles 09:13:56 SkyScan query 09:13:57 SkyScan query done: ret=0 az=82.425<-5495 ze=66.495<-7567 Statuses=0009 0008 09:13:57 Msec=750 True Az=82.425 Ze=66.495 Az status=0009 Ze status=0008 09:13:57 Check angles 09:13:57 SkyScan query 09:13:58 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 09:13:58 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 09:13:58 Check angles 09:13:58 SkyScan query 09:13:58 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 09:13:58 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 09:13:58 Check angles 09:13:58 SkyScan query 09:13:59 SkyScan query done: ret=0 az=134.85<-8990 ze=66.495<-7567 Statuses=0009 0008 09:13:59 Msec=3000 True Az=134.85 Ze=66.495 Az status=0009 Ze status=0008 09:13:59 Check angles 09:13:59 SkyScan query 09:14:00 SkyScan query done: ret=0 az=152.13<-10142 ze=66.495<-7567 Statuses=0009 0008 09:14:00 Msec=3750 True Az=152.13 Ze=66.495 Az status=0009 Ze status=0008 09:14:00 Check angles 09:14:00 SkyScan query 09:14:01 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:14:01 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:14:01 Message to Master queued w/err=0: serial=6517 error=0 09:14:06 Received message from Master: op=Filter serial=6518 09:14:06 Color wheel filter change from 0 to 0 09:14:06 FLIGetFilterPos err=0 currentPosition=0 09:14:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:06 Filter is already there-color wheel unchanged 09:14:06 Received message from Master: op=Shutter serial=6519 09:14:06 Shutter LASER close 09:14:06 Received message from Camera: op=State serial=6521 09:14:06 GetSingleValue result=40 Value=cccccccc 09:14:06 SkyScan query 09:14:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:14:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:06 Parameters OK 09:14:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:06 Set A/D data flow result=40 09:14:06 Set A/D channel type result=40 09:14:06 Set A/D encoding result=40 09:14:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:06 Set channel filter=0.000000e+000 result=40 09:14:06 Config A/D Result=40 09:14:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:06 Get A/D filter: -9.255963e+061 result=40 09:14:06 Get A/D value=-858993460 result=40 09:14:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:06 Parameters OK 09:14:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:06 Set A/D data flow result=40 09:14:06 Set A/D channel type result=40 09:14:06 Set A/D encoding result=40 09:14:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:06 Set channel filter=0.000000e+000 result=40 09:14:06 Config A/D Result=40 09:14:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:06 Get A/D filter: -9.255963e+061 result=40 09:14:06 Get A/D value=-858993460 result=40 09:14:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:06 Aux= 09:14:06 Message to Camera, serial 6521 queued 09:14:37 Received message from Master: op=PointingHead serial=6528 09:14:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:14:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:14:38 Point started: ret=0 09:14:38 point_skyscan result=0 09:14:38 Check angles 09:14:38 SkyScan query 09:14:39 SkyScan query done: ret=0 az=134.565<-8971 ze=36.315<-9579 Statuses=0009 0009 09:14:39 Msec=0 True Az=134.565 Ze=36.315 Az status=0009 Ze status=0009 09:14:39 Check angles 09:14:39 SkyScan query 09:14:40 SkyScan query done: ret=0 az=117<-7800 ze=15.36<-10976 Statuses=0009 0009 09:14:40 Msec=750 True Az=117 Ze=15.36 Az status=0009 Ze status=0009 09:14:40 Check angles 09:14:40 SkyScan query 09:14:40 SkyScan query done: ret=0 az=99.6<-6640 ze=-5.595<-12373 Statuses=0009 0009 09:14:40 Msec=1500 True Az=99.6 Ze=-5.595 Az status=0009 Ze status=0009 09:14:41 Check angles 09:14:41 SkyScan query 09:14:41 SkyScan query done: ret=0 az=82.17<-5478 ze=-26.565<-13771 Statuses=0009 0009 09:14:41 Msec=2250 True Az=82.17 Ze=-26.565 Az status=0009 Ze status=0009 09:14:41 Check angles 09:14:41 SkyScan query 09:14:42 SkyScan query done: ret=0 az=64.65<-4310 ze=-38.565<-14571 Statuses=0009 0008 09:14:42 Msec=3000 True Az=64.65 Ze=-38.565 Az status=0009 Ze status=0008 09:14:42 Check angles 09:14:42 SkyScan query 09:14:43 SkyScan query done: ret=0 az=47.19<-3146 ze=-38.535<-14569 Statuses=0009 0008 09:14:43 Msec=3750 True Az=47.19 Ze=-38.535 Az status=0009 Ze status=0008 09:14:43 Check angles 09:14:43 SkyScan query 09:14:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:14:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:14:43 Message to Master queued w/err=0: serial=6528 error=0 09:14:48 Received message from Master: op=Filter serial=6529 09:14:48 Color wheel filter change from 0 to 0 09:14:48 FLIGetFilterPos err=0 currentPosition=0 09:14:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:14:48 Filter is already there-color wheel unchanged 09:14:49 Received message from Master: op=Shutter serial=6530 09:14:49 Shutter LASER close 09:14:49 Received message from Camera: op=State serial=6532 09:14:49 GetSingleValue result=40 Value=cccccccc 09:14:49 SkyScan query 09:14:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:14:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:49 Parameters OK 09:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:49 Set A/D data flow result=40 09:14:49 Set A/D channel type result=40 09:14:49 Set A/D encoding result=40 09:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:49 Set channel filter=0.000000e+000 result=40 09:14:49 Config A/D Result=40 09:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:49 Get A/D filter: -9.255963e+061 result=40 09:14:49 Get A/D value=-858993460 result=40 09:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:14:49 Parameters OK 09:14:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:14:49 Set A/D data flow result=40 09:14:49 Set A/D channel type result=40 09:14:49 Set A/D encoding result=40 09:14:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:14:49 Set channel filter=0.000000e+000 result=40 09:14:49 Config A/D Result=40 09:14:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:14:49 Get A/D filter: -9.255963e+061 result=40 09:14:49 Get A/D value=-858993460 result=40 09:14:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:14:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:14:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:14:49 Aux= 09:14:49 Message to Camera, serial 6532 queued 09:15:20 Received message from Master: op=PointingHead serial=6539 09:15:20 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:15:20 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:15:20 Point started: ret=0 09:15:20 point_skyscan result=0 09:15:21 Check angles 09:15:21 SkyScan query 09:15:22 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.175<-16545 Statuses=0009 0009 09:15:22 Msec=0 True Az=63.81 Ze=-68.175 Az status=0009 Ze status=0009 09:15:22 Check angles 09:15:22 SkyScan query 09:15:22 SkyScan query done: ret=0 az=81.36<-5424 ze=-89.145<-17943 Statuses=0009 0009 09:15:22 Msec=750 True Az=81.36 Ze=-89.145 Az status=0009 Ze status=0009 09:15:23 Check angles 09:15:23 SkyScan query 09:15:23 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.085<-19339 Statuses=0009 0009 09:15:23 Msec=1500 True Az=98.97 Ze=-110.085 Az status=0009 Ze status=0009 09:15:23 Check angles 09:15:23 SkyScan query 09:15:24 SkyScan query done: ret=0 az=116.34<-7756 ze=-131.025<-20735 Statuses=0009 0009 09:15:24 Msec=2250 True Az=116.34 Ze=-131.025 Az status=0009 Ze status=0009 09:15:24 Check angles 09:15:24 SkyScan query 09:15:25 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 09:15:25 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 09:15:25 Check angles 09:15:25 SkyScan query 09:15:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:15:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:15:25 Message to Master queued w/err=0: serial=6539 error=0 09:15:30 Received message from Master: op=Filter serial=6540 09:15:30 Color wheel filter change from 0 to 0 09:15:30 FLIGetFilterPos err=0 currentPosition=0 09:15:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:15:30 Filter is already there-color wheel unchanged 09:15:31 Received message from Master: op=Shutter serial=6541 09:15:31 Shutter LASER close 09:15:31 Received message from Camera: op=State serial=6543 09:15:31 GetSingleValue result=40 Value=cccccccc 09:15:31 SkyScan query 09:15:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:15:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:31 Parameters OK 09:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:31 Set A/D data flow result=40 09:15:31 Set A/D channel type result=40 09:15:31 Set A/D encoding result=40 09:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:31 Set channel filter=0.000000e+000 result=40 09:15:31 Config A/D Result=40 09:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:31 Get A/D filter: -9.255963e+061 result=40 09:15:31 Get A/D value=-858993460 result=40 09:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:15:31 Parameters OK 09:15:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:15:31 Set A/D data flow result=40 09:15:31 Set A/D channel type result=40 09:15:31 Set A/D encoding result=40 09:15:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:15:31 Set channel filter=0.000000e+000 result=40 09:15:31 Config A/D Result=40 09:15:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:15:31 Get A/D filter: -9.255963e+061 result=40 09:15:31 Get A/D value=-858993460 result=40 09:15:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:15:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:15:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:15:31 Aux= 09:15:31 Message to Camera, serial 6543 queued 09:16:02 Received message from Master: op=PointingHead serial=6550 09:16:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:16:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:16:03 Point started: ret=0 09:16:03 point_skyscan result=0 09:16:03 Check angles 09:16:03 SkyScan query 09:16:04 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.075<-23405 Statuses=0009 0009 09:16:04 Msec=0 True Az=113.025 Ze=-171.075 Az status=0009 Ze status=0009 09:16:04 Check angles 09:16:04 SkyScan query 09:16:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:16:05 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:16:05 Message to Master queued w/err=0: serial=6550 error=0 09:16:10 Received message from Master: op=Filter serial=6551 09:16:10 Color wheel filter change from 0 to 0 09:16:10 FLIGetFilterPos err=0 currentPosition=0 09:16:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:10 Filter is already there-color wheel unchanged 09:16:10 Received message from Master: op=Shutter serial=6552 09:16:10 Shutter LASER open 09:16:10 Received message from Camera: op=State serial=6554 09:16:10 GetSingleValue result=40 Value=cccccccc 09:16:10 SkyScan query 09:16:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:16:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:11 Parameters OK 09:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:11 Set A/D data flow result=40 09:16:11 Set A/D channel type result=40 09:16:11 Set A/D encoding result=40 09:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:11 Set channel filter=0.000000e+000 result=40 09:16:11 Config A/D Result=40 09:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:11 Get A/D filter: -9.255963e+061 result=40 09:16:11 Get A/D value=-858993460 result=40 09:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:11 Parameters OK 09:16:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:11 Set A/D data flow result=40 09:16:11 Set A/D channel type result=40 09:16:11 Set A/D encoding result=40 09:16:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:11 Set channel filter=0.000000e+000 result=40 09:16:11 Config A/D Result=40 09:16:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:11 Get A/D filter: -9.255963e+061 result=40 09:16:11 Get A/D value=-858993460 result=40 09:16:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:11 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:11 Aux= 09:16:11 Message to Camera, serial 6554 queued 09:16:13 Received message from Master: op=Shutter serial=6558 09:16:13 Shutter LASER close 09:16:14 Received message from Master: op=PointingHead serial=6562 09:16:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:16:14 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:16:14 Point started: ret=0 09:16:14 point_skyscan result=0 09:16:15 Check angles 09:16:15 SkyScan query 09:16:15 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.205<-21547 Statuses=0009 0009 09:16:15 Msec=0 True Az=135.975 Ze=-143.205 Az status=0009 Ze status=0009 09:16:15 Check angles 09:16:15 SkyScan query 09:16:16 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.8<-20120 Statuses=0009 0009 09:16:16 Msec=750 True Az=153.87 Ze=-121.8 Az status=0009 Ze status=0009 09:16:16 Check angles 09:16:16 SkyScan query 09:16:17 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.86<-18724 Statuses=0009 0009 09:16:17 Msec=1500 True Az=171.225 Ze=-100.86 Az status=0009 Ze status=0009 09:16:17 Check angles 09:16:17 SkyScan query 09:16:18 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.905<-17327 Statuses=0008 0009 09:16:18 Msec=2250 True Az=176.025 Ze=-79.905 Az status=0008 Ze status=0009 09:16:18 Check angles 09:16:18 SkyScan query 09:16:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.95<-15930 Statuses=0008 0009 09:16:18 Msec=3000 True Az=176.01 Ze=-58.95 Az status=0008 Ze status=0009 09:16:18 Check angles 09:16:18 SkyScan query 09:16:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:16:19 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:16:19 Message to Master queued w/err=0: serial=6562 error=0 09:16:24 Received message from Master: op=Filter serial=6563 09:16:24 Color wheel filter change from 0 to 0 09:16:24 FLIGetFilterPos err=0 currentPosition=0 09:16:24 FLIGetStepsRemaining err=0 RemainingSteps=0 09:16:24 Filter is already there-color wheel unchanged 09:16:24 Received message from Master: op=Shutter serial=6564 09:16:24 Shutter LASER close 09:16:24 Received message from Camera: op=State serial=6566 09:16:24 GetSingleValue result=40 Value=cccccccc 09:16:24 SkyScan query 09:16:25 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:16:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:25 Parameters OK 09:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:25 Set A/D data flow result=40 09:16:25 Set A/D channel type result=40 09:16:25 Set A/D encoding result=40 09:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:25 Set channel filter=0.000000e+000 result=40 09:16:25 Config A/D Result=40 09:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:25 Get A/D filter: -9.255963e+061 result=40 09:16:25 Get A/D value=-858993460 result=40 09:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:16:25 Parameters OK 09:16:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:16:25 Set A/D data flow result=40 09:16:25 Set A/D channel type result=40 09:16:25 Set A/D encoding result=40 09:16:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:16:25 Set channel filter=0.000000e+000 result=40 09:16:25 Config A/D Result=40 09:16:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:16:25 Get A/D filter: -9.255963e+061 result=40 09:16:25 Get A/D value=-858993460 result=40 09:16:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:16:25 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:16:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:16:25 Aux= 09:16:25 Message to Camera, serial 6566 queued 09:16:56 Received message from Master: op=PointingHead serial=6573 09:16:56 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:16:56 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:16:56 Point started: ret=0 09:16:56 point_skyscan result=0 09:16:57 Check angles 09:16:57 SkyScan query 09:16:57 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.51<-13434 Statuses=0009 0009 09:16:57 Msec=0 True Az=152.76 Ze=-21.51 Az status=0009 Ze status=0009 09:16:58 Check angles 09:16:58 SkyScan query 09:16:58 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.54<-12036 Statuses=0009 0009 09:16:58 Msec=750 True Az=135.36 Ze=-0.54 Az status=0009 Ze status=0009 09:16:58 Check angles 09:16:58 SkyScan query 09:16:59 SkyScan query done: ret=0 az=117.45<-7830 ze=20.835<-10611 Statuses=0009 0009 09:16:59 Msec=1500 True Az=117.45 Ze=20.835 Az status=0009 Ze status=0009 09:16:59 Check angles 09:16:59 SkyScan query 09:17:00 SkyScan query done: ret=0 az=99.675<-6645 ze=42.225<-9185 Statuses=0009 0009 09:17:00 Msec=2250 True Az=99.675 Ze=42.225 Az status=0009 Ze status=0009 09:17:00 Check angles 09:17:00 SkyScan query 09:17:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 09:17:01 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 09:17:01 Check angles 09:17:01 SkyScan query 09:17:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:17:01 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 09:17:01 Message to Master queued w/err=0: serial=6573 error=0 09:17:06 Received message from Master: op=Filter serial=6574 09:17:06 Color wheel filter change from 0 to 0 09:17:06 FLIGetFilterPos err=0 currentPosition=0 09:17:06 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:06 Filter is already there-color wheel unchanged 09:17:06 Received message from Master: op=Shutter serial=6575 09:17:06 Shutter LASER close 09:17:06 Received message from Camera: op=State serial=6577 09:17:06 GetSingleValue result=40 Value=cccccccc 09:17:06 SkyScan query 09:17:07 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:17:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:07 Parameters OK 09:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:07 Set A/D data flow result=40 09:17:07 Set A/D channel type result=40 09:17:07 Set A/D encoding result=40 09:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:07 Set channel filter=0.000000e+000 result=40 09:17:07 Config A/D Result=40 09:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:07 Get A/D filter: -9.255963e+061 result=40 09:17:07 Get A/D value=-858993460 result=40 09:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:07 Parameters OK 09:17:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:07 Set A/D data flow result=40 09:17:07 Set A/D channel type result=40 09:17:07 Set A/D encoding result=40 09:17:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:07 Set channel filter=0.000000e+000 result=40 09:17:07 Config A/D Result=40 09:17:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:07 Get A/D filter: -9.255963e+061 result=40 09:17:07 Get A/D value=-858993460 result=40 09:17:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:07 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:07 Aux= 09:17:07 Message to Camera, serial 6577 queued 09:17:38 Received message from Master: op=PointingHead serial=6584 09:17:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:17:38 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:17:38 Point started: ret=0 09:17:38 point_skyscan result=0 09:17:39 Check angles 09:17:39 SkyScan query 09:17:40 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 09:17:40 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 09:17:40 Check angles 09:17:40 SkyScan query 09:17:40 SkyScan query done: ret=0 az=126.27<-8418 ze=38.505<-9433 Statuses=0009 0008 09:17:40 Msec=750 True Az=126.27 Ze=38.505 Az status=0009 Ze status=0008 09:17:40 Check angles 09:17:40 SkyScan query 09:17:41 SkyScan query done: ret=0 az=143.73<-9582 ze=38.505<-9433 Statuses=0009 0008 09:17:41 Msec=1500 True Az=143.73 Ze=38.505 Az status=0009 Ze status=0008 09:17:41 Check angles 09:17:41 SkyScan query 09:17:42 SkyScan query done: ret=0 az=161.07<-10738 ze=38.505<-9433 Statuses=0009 0008 09:17:42 Msec=2250 True Az=161.07 Ze=38.505 Az status=0009 Ze status=0008 09:17:42 Check angles 09:17:42 SkyScan query 09:17:43 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 09:17:43 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 09:17:43 Check angles 09:17:43 SkyScan query 09:17:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:17:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:17:43 Message to Master queued w/err=0: serial=6584 error=0 09:17:48 Received message from Master: op=Filter serial=6585 09:17:48 Color wheel filter change from 0 to 0 09:17:48 FLIGetFilterPos err=0 currentPosition=0 09:17:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:17:48 Filter is already there-color wheel unchanged 09:17:48 Received message from Master: op=Shutter serial=6586 09:17:48 Shutter LASER close 09:17:49 Received message from Camera: op=State serial=6588 09:17:49 GetSingleValue result=40 Value=cccccccc 09:17:49 SkyScan query 09:17:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:17:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:49 Parameters OK 09:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:49 Set A/D data flow result=40 09:17:49 Set A/D channel type result=40 09:17:49 Set A/D encoding result=40 09:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:49 Set channel filter=0.000000e+000 result=40 09:17:49 Config A/D Result=40 09:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:49 Get A/D filter: -9.255963e+061 result=40 09:17:49 Get A/D value=-858993460 result=40 09:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:17:49 Parameters OK 09:17:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:17:49 Set A/D data flow result=40 09:17:49 Set A/D channel type result=40 09:17:49 Set A/D encoding result=40 09:17:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:17:49 Set channel filter=0.000000e+000 result=40 09:17:49 Config A/D Result=40 09:17:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:17:49 Get A/D filter: -9.255963e+061 result=40 09:17:49 Get A/D value=-858993460 result=40 09:17:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:17:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:17:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:17:49 Aux= 09:17:49 Message to Camera, serial 6588 queued 09:18:20 Received message from Master: op=PointingHead serial=6595 09:18:20 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:18:20 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:18:20 Point started: ret=0 09:18:20 point_skyscan result=0 09:18:21 Check angles 09:18:21 SkyScan query 09:18:22 SkyScan query done: ret=0 az=152.985<-10199 ze=8.79<-11414 Statuses=0009 0009 09:18:22 Msec=0 True Az=152.985 Ze=8.79 Az status=0009 Ze status=0009 09:18:22 Check angles 09:18:22 SkyScan query 09:18:22 SkyScan query done: ret=0 az=135.21<-9014 ze=-12.585<-12839 Statuses=0009 0009 09:18:22 Msec=750 True Az=135.21 Ze=-12.585 Az status=0009 Ze status=0009 09:18:23 Check angles 09:18:23 SkyScan query 09:18:23 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.525<-14235 Statuses=0009 0009 09:18:23 Msec=1500 True Az=117.6 Ze=-33.525 Az status=0009 Ze status=0009 09:18:23 Check angles 09:18:23 SkyScan query 09:18:24 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.54<-15436 Statuses=0009 0009 09:18:24 Msec=2250 True Az=99.93 Ze=-51.54 Az status=0009 Ze status=0009 09:18:24 Check angles 09:18:24 SkyScan query 09:18:25 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:18:25 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:18:25 Check angles 09:18:25 SkyScan query 09:18:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:18:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:18:25 Message to Master queued w/err=0: serial=6595 error=0 09:18:30 Received message from Master: op=Filter serial=6596 09:18:30 Color wheel filter change from 0 to 0 09:18:30 FLIGetFilterPos err=0 currentPosition=0 09:18:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:18:30 Filter is already there-color wheel unchanged 09:18:31 Received message from Master: op=Shutter serial=6597 09:18:31 Shutter LASER close 09:18:31 Received message from Camera: op=State serial=6599 09:18:31 GetSingleValue result=40 Value=cccccccc 09:18:31 SkyScan query 09:18:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:18:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:31 Parameters OK 09:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:31 Set A/D data flow result=40 09:18:31 Set A/D channel type result=40 09:18:31 Set A/D encoding result=40 09:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:31 Set channel filter=0.000000e+000 result=40 09:18:31 Config A/D Result=40 09:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:31 Get A/D filter: -9.255963e+061 result=40 09:18:31 Get A/D value=-858993460 result=40 09:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:18:31 Parameters OK 09:18:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:18:31 Set A/D data flow result=40 09:18:31 Set A/D channel type result=40 09:18:31 Set A/D encoding result=40 09:18:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:18:31 Set channel filter=0.000000e+000 result=40 09:18:31 Config A/D Result=40 09:18:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:18:31 Get A/D filter: -9.255963e+061 result=40 09:18:31 Get A/D value=-858993460 result=40 09:18:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:18:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:18:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:18:31 Aux= 09:18:31 Message to Camera, serial 6599 queued 09:19:02 Received message from Master: op=PointingHead serial=6606 09:19:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:19:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:19:02 Point started: ret=0 09:19:02 point_skyscan result=0 09:19:03 Check angles 09:19:03 SkyScan query 09:19:04 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.225<-17415 Statuses=0009 0009 09:19:04 Msec=0 True Az=108.93 Ze=-81.225 Az status=0009 Ze status=0009 09:19:04 Check angles 09:19:04 SkyScan query 09:19:04 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.195<-18813 Statuses=0008 0009 09:19:04 Msec=750 True Az=113.01 Ze=-102.195 Az status=0008 Ze status=0009 09:19:05 Check angles 09:19:05 SkyScan query 09:19:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.555<-20237 Statuses=0008 0009 09:19:05 Msec=1500 True Az=112.995 Ze=-123.555 Az status=0008 Ze status=0009 09:19:05 Check angles 09:19:05 SkyScan query 09:19:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.945<-21663 Statuses=0008 0009 09:19:06 Msec=2250 True Az=112.995 Ze=-144.945 Az status=0008 Ze status=0009 09:19:06 Check angles 09:19:06 SkyScan query 09:19:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-166.35<-23090 Statuses=0008 0009 09:19:07 Msec=3000 True Az=113.01 Ze=-166.35 Az status=0008 Ze status=0009 09:19:07 Check angles 09:19:07 SkyScan query 09:19:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:19:08 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:19:08 Message to Master queued w/err=0: serial=6606 error=0 09:19:13 Received message from Master: op=Filter serial=6607 09:19:13 Color wheel filter change from 0 to 0 09:19:13 FLIGetFilterPos err=0 currentPosition=0 09:19:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:13 Filter is already there-color wheel unchanged 09:19:13 Received message from Master: op=Shutter serial=6608 09:19:13 Shutter LASER open 09:19:13 Received message from Camera: op=State serial=6610 09:19:13 GetSingleValue result=40 Value=cccccccc 09:19:13 SkyScan query 09:19:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:19:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:13 Parameters OK 09:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:13 Set A/D data flow result=40 09:19:13 Set A/D channel type result=40 09:19:13 Set A/D encoding result=40 09:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:13 Set channel filter=0.000000e+000 result=40 09:19:13 Config A/D Result=40 09:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:13 Get A/D filter: -9.255963e+061 result=40 09:19:13 Get A/D value=-858993460 result=40 09:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:13 Parameters OK 09:19:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:13 Set A/D data flow result=40 09:19:13 Set A/D channel type result=40 09:19:13 Set A/D encoding result=40 09:19:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:13 Set channel filter=0.000000e+000 result=40 09:19:13 Config A/D Result=40 09:19:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:13 Get A/D filter: -9.255963e+061 result=40 09:19:13 Get A/D value=-858993460 result=40 09:19:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:13 Aux= 09:19:13 Message to Camera, serial 6610 queued 09:19:16 Received message from Master: op=Shutter serial=6614 09:19:16 Shutter LASER close 09:19:16 Received message from Master: op=PointingHead serial=6618 09:19:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:19:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:19:17 Point started: ret=0 09:19:17 point_skyscan result=0 09:19:17 Check angles 09:19:17 SkyScan query 09:19:18 SkyScan query done: ret=0 az=89.58<-5972 ze=156.795<-1547 Statuses=0009 0009 09:19:18 Msec=0 True Az=89.58 Ze=156.795 Az status=0009 Ze status=0009 09:19:18 Check angles 09:19:18 SkyScan query 09:19:19 SkyScan query done: ret=0 az=72.12<-4808 ze=135.825<-2945 Statuses=0009 0009 09:19:19 Msec=750 True Az=72.12 Ze=135.825 Az status=0009 Ze status=0009 09:19:19 Check angles 09:19:19 SkyScan query 09:19:20 SkyScan query done: ret=0 az=54.45<-3630 ze=114.45<-4370 Statuses=0009 0009 09:19:20 Msec=1500 True Az=54.45 Ze=114.45 Az status=0009 Ze status=0009 09:19:20 Check angles 09:19:20 SkyScan query 09:19:20 SkyScan query done: ret=0 az=40.905<-2727 ze=93.48<-5768 Statuses=0009 0009 09:19:20 Msec=2250 True Az=40.905 Ze=93.48 Az status=0009 Ze status=0009 09:19:20 Check angles 09:19:20 SkyScan query 09:19:21 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 09:19:21 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 09:19:21 Check angles 09:19:21 SkyScan query 09:19:22 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 09:19:22 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 09:19:22 Check angles 09:19:22 SkyScan query 09:19:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:19:23 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:19:23 Message to Master queued w/err=0: serial=6618 error=0 09:19:28 Received message from Master: op=Filter serial=6619 09:19:28 Color wheel filter change from 0 to 0 09:19:28 FLIGetFilterPos err=0 currentPosition=0 09:19:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:19:28 Filter is already there-color wheel unchanged 09:19:28 Received message from Master: op=Shutter serial=6620 09:19:28 Shutter LASER close 09:19:28 Received message from Camera: op=State serial=6622 09:19:28 GetSingleValue result=40 Value=cccccccc 09:19:28 SkyScan query 09:19:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:19:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:28 Parameters OK 09:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:28 Set A/D data flow result=40 09:19:28 Set A/D channel type result=40 09:19:28 Set A/D encoding result=40 09:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:28 Set channel filter=0.000000e+000 result=40 09:19:28 Config A/D Result=40 09:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:28 Get A/D filter: -9.255963e+061 result=40 09:19:28 Get A/D value=-858993460 result=40 09:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:19:28 Parameters OK 09:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:19:28 Set A/D data flow result=40 09:19:28 Set A/D channel type result=40 09:19:28 Set A/D encoding result=40 09:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:19:28 Set channel filter=0.000000e+000 result=40 09:19:28 Config A/D Result=40 09:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:19:28 Get A/D filter: -9.255963e+061 result=40 09:19:28 Get A/D value=-858993460 result=40 09:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:19:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:19:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:19:28 Aux= 09:19:28 Message to Camera, serial 6622 queued 09:19:59 Received message from Master: op=PointingHead serial=6629 09:19:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:19:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:20:00 Point started: ret=0 09:20:00 point_skyscan result=0 09:20:00 Check angles 09:20:00 SkyScan query 09:20:01 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 09:20:01 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 09:20:01 Check angles 09:20:01 SkyScan query 09:20:02 SkyScan query done: ret=0 az=81.18<-5412 ze=66.525<-7565 Statuses=0009 0008 09:20:02 Msec=750 True Az=81.18 Ze=66.525 Az status=0009 Ze status=0008 09:20:02 Check angles 09:20:02 SkyScan query 09:20:02 SkyScan query done: ret=0 az=98.925<-6595 ze=66.51<-7566 Statuses=0009 0008 09:20:02 Msec=1500 True Az=98.925 Ze=66.51 Az status=0009 Ze status=0008 09:20:03 Check angles 09:20:03 SkyScan query 09:20:03 SkyScan query done: ret=0 az=116.31<-7754 ze=66.51<-7566 Statuses=0009 0008 09:20:03 Msec=2250 True Az=116.31 Ze=66.51 Az status=0009 Ze status=0008 09:20:03 Check angles 09:20:03 SkyScan query 09:20:04 SkyScan query done: ret=0 az=133.695<-8913 ze=66.51<-7566 Statuses=0009 0008 09:20:04 Msec=3000 True Az=133.695 Ze=66.51 Az status=0009 Ze status=0008 09:20:04 Check angles 09:20:04 SkyScan query 09:20:05 SkyScan query done: ret=0 az=151.155<-10077 ze=66.51<-7566 Statuses=0009 0008 09:20:05 Msec=3750 True Az=151.155 Ze=66.51 Az status=0009 Ze status=0008 09:20:05 Check angles 09:20:05 SkyScan query 09:20:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.51<-7566 Statuses=0008 0008 09:20:05 Msec=4500 True Az=158.01 Ze=66.51 Az status=0008 Ze status=0008 09:20:05 Message to Master queued w/err=0: serial=6629 error=0 09:20:10 Received message from Master: op=Filter serial=6630 09:20:10 Color wheel filter change from 0 to 0 09:20:10 FLIGetFilterPos err=0 currentPosition=0 09:20:10 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:10 Filter is already there-color wheel unchanged 09:20:11 Received message from Master: op=Shutter serial=6631 09:20:11 Shutter LASER close 09:20:11 Received message from Camera: op=State serial=6633 09:20:11 GetSingleValue result=40 Value=cccccccc 09:20:11 SkyScan query 09:20:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 09:20:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:11 Parameters OK 09:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:11 Set A/D data flow result=40 09:20:11 Set A/D channel type result=40 09:20:11 Set A/D encoding result=40 09:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:11 Set channel filter=0.000000e+000 result=40 09:20:11 Config A/D Result=40 09:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:11 Get A/D filter: -9.255963e+061 result=40 09:20:11 Get A/D value=-858993460 result=40 09:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:11 Parameters OK 09:20:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:11 Set A/D data flow result=40 09:20:11 Set A/D channel type result=40 09:20:11 Set A/D encoding result=40 09:20:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:11 Set channel filter=0.000000e+000 result=40 09:20:11 Config A/D Result=40 09:20:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:11 Get A/D filter: -9.255963e+061 result=40 09:20:11 Get A/D value=-858993460 result=40 [UTC 2018-12-4 09:20:11] 09:20:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:11 Aux= 09:20:11 Message to Camera, serial 6633 queued 09:20:42 Received message from Master: op=PointingHead serial=6640 09:20:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:20:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:20:42 Point started: ret=0 09:20:42 point_skyscan result=0 09:20:43 Check angles 09:20:43 SkyScan query 09:20:44 SkyScan query done: ret=0 az=135.165<-9011 ze=36.855<-9543 Statuses=0009 0009 09:20:44 Msec=0 True Az=135.165 Ze=36.855 Az status=0009 Ze status=0009 09:20:44 Check angles 09:20:44 SkyScan query 09:20:45 SkyScan query done: ret=0 az=117.69<-7846 ze=15.9<-10940 Statuses=0009 0009 09:20:45 Msec=750 True Az=117.69 Ze=15.9 Az status=0009 Ze status=0009 09:20:45 Check angles 09:20:45 SkyScan query 09:20:45 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.07<-12338 Statuses=0009 0009 09:20:45 Msec=1500 True Az=100.275 Ze=-5.07 Az status=0009 Ze status=0009 09:20:45 Check angles 09:20:45 SkyScan query 09:20:46 SkyScan query done: ret=0 az=82.83<-5522 ze=-26.04<-13736 Statuses=0009 0009 09:20:46 Msec=2250 True Az=82.83 Ze=-26.04 Az status=0009 Ze status=0009 09:20:46 Check angles 09:20:46 SkyScan query 09:20:47 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.565<-14571 Statuses=0009 0008 09:20:47 Msec=3000 True Az=65.31 Ze=-38.565 Az status=0009 Ze status=0008 09:20:47 Check angles 09:20:47 SkyScan query 09:20:48 SkyScan query done: ret=0 az=47.895<-3193 ze=-38.535<-14569 Statuses=0009 0008 09:20:48 Msec=3750 True Az=47.895 Ze=-38.535 Az status=0009 Ze status=0008 09:20:48 Check angles 09:20:48 SkyScan query 09:20:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:20:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:20:48 Message to Master queued w/err=0: serial=6640 error=0 09:20:53 Received message from Master: op=Filter serial=6641 09:20:53 Color wheel filter change from 0 to 0 09:20:53 FLIGetFilterPos err=0 currentPosition=0 09:20:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:20:53 Filter is already there-color wheel unchanged 09:20:53 Received message from Master: op=Shutter serial=6642 09:20:53 Shutter LASER close 09:20:54 Received message from Camera: op=State serial=6644 09:20:54 GetSingleValue result=40 Value=cccccccc 09:20:54 SkyScan query 09:20:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:20:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:54 Parameters OK 09:20:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:54 Set A/D data flow result=40 09:20:54 Set A/D channel type result=40 09:20:54 Set A/D encoding result=40 09:20:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:54 Set channel filter=0.000000e+000 result=40 09:20:54 Config A/D Result=40 09:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:54 Get A/D filter: -9.255963e+061 result=40 09:20:54 Get A/D value=-858993460 result=40 09:20:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:20:54 Parameters OK 09:20:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:20:54 Set A/D data flow result=40 09:20:54 Set A/D channel type result=40 09:20:54 Set A/D encoding result=40 09:20:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:20:54 Set channel filter=0.000000e+000 result=40 09:20:54 Config A/D Result=40 09:20:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:20:54 Get A/D filter: -9.255963e+061 result=40 09:20:54 Get A/D value=-858993460 result=40 09:20:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:20:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:20:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:20:54 Aux= 09:20:54 Message to Camera, serial 6644 queued 09:21:25 Received message from Master: op=PointingHead serial=6651 09:21:25 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:21:25 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:21:25 Point started: ret=0 09:21:25 point_skyscan result=0 09:21:26 Check angles 09:21:26 SkyScan query 09:21:27 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.685<-16579 Statuses=0009 0009 09:21:27 Msec=0 True Az=64.185 Ze=-68.685 Az status=0009 Ze status=0009 09:21:27 Check angles 09:21:27 SkyScan query 09:21:27 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.655<-17977 Statuses=0009 0009 09:21:27 Msec=750 True Az=81.885 Ze=-89.655 Az status=0009 Ze status=0009 09:21:28 Check angles 09:21:28 SkyScan query 09:21:28 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.595<-19373 Statuses=0009 0009 09:21:28 Msec=1500 True Az=99.36 Ze=-110.595 Az status=0009 Ze status=0009 09:21:28 Check angles 09:21:28 SkyScan query 09:21:29 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.55<-20770 Statuses=0009 0009 09:21:29 Msec=2250 True Az=116.745 Ze=-131.55 Az status=0009 Ze status=0009 09:21:29 Check angles 09:21:29 SkyScan query 09:21:30 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 09:21:30 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 09:21:30 Check angles 09:21:30 SkyScan query 09:21:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:21:30 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:21:30 Message to Master queued w/err=0: serial=6651 error=0 09:21:35 Received message from Master: op=Filter serial=6652 09:21:35 Color wheel filter change from 0 to 0 09:21:35 FLIGetFilterPos err=0 currentPosition=0 09:21:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:21:35 Filter is already there-color wheel unchanged 09:21:36 Received message from Master: op=Shutter serial=6653 09:21:36 Shutter LASER close 09:21:36 Received message from Camera: op=State serial=6655 09:21:36 GetSingleValue result=40 Value=cccccccc 09:21:36 SkyScan query 09:21:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:21:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:36 Parameters OK 09:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:36 Set A/D data flow result=40 09:21:36 Set A/D channel type result=40 09:21:36 Set A/D encoding result=40 09:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:36 Set channel filter=0.000000e+000 result=40 09:21:36 Config A/D Result=40 09:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:36 Get A/D filter: -9.255963e+061 result=40 09:21:36 Get A/D value=-858993460 result=40 09:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:21:36 Parameters OK 09:21:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:21:36 Set A/D data flow result=40 09:21:36 Set A/D channel type result=40 09:21:36 Set A/D encoding result=40 09:21:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:21:36 Set channel filter=0.000000e+000 result=40 09:21:36 Config A/D Result=40 09:21:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:21:36 Get A/D filter: -9.255963e+061 result=40 09:21:36 Get A/D value=-858993460 result=40 09:21:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:21:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:21:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:21:36 Aux= 09:21:36 Message to Camera, serial 6655 queued 09:21:49 Received message from Master: op=Identify serial=6656 09:22:07 Received message from Master: op=PointingHead serial=6665 09:22:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:22:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:22:07 Point started: ret=0 09:22:07 point_skyscan result=0 09:22:08 Check angles 09:22:08 SkyScan query 09:22:09 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.925<-23395 Statuses=0009 0009 09:22:09 Msec=0 True Az=113.025 Ze=-170.925 Az status=0009 Ze status=0009 09:22:09 Check angles 09:22:09 SkyScan query 09:22:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:22:10 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:22:10 Message to Master queued w/err=0: serial=6665 error=0 09:22:15 Received message from Master: op=Filter serial=6666 09:22:15 Color wheel filter change from 0 to 0 09:22:15 FLIGetFilterPos err=0 currentPosition=0 09:22:15 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:15 Filter is already there-color wheel unchanged 09:22:15 Received message from Master: op=Shutter serial=6667 09:22:15 Shutter LASER open 09:22:15 Received message from Camera: op=State serial=6669 09:22:15 GetSingleValue result=40 Value=cccccccc 09:22:15 SkyScan query 09:22:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:22:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:15 Parameters OK 09:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:15 Set A/D data flow result=40 09:22:15 Set A/D channel type result=40 09:22:15 Set A/D encoding result=40 09:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:15 Set channel filter=0.000000e+000 result=40 09:22:15 Config A/D Result=40 09:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:15 Get A/D filter: -9.255963e+061 result=40 09:22:15 Get A/D value=-858993460 result=40 09:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:15 Parameters OK 09:22:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:15 Set A/D data flow result=40 09:22:15 Set A/D channel type result=40 09:22:15 Set A/D encoding result=40 09:22:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:15 Set channel filter=0.000000e+000 result=40 09:22:15 Config A/D Result=40 09:22:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:15 Get A/D filter: -9.255963e+061 result=40 09:22:15 Get A/D value=-858993460 result=40 09:22:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:15 Aux= 09:22:15 Message to Camera, serial 6669 queued 09:22:18 Received message from Master: op=Shutter serial=6673 09:22:18 Shutter LASER close 09:22:19 Received message from Master: op=PointingHead serial=6677 09:22:19 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:22:19 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:22:19 Point started: ret=0 09:22:19 point_skyscan result=0 09:22:20 Check angles 09:22:20 SkyScan query 09:22:20 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.25<-21550 Statuses=0009 0009 09:22:20 Msec=0 True Az=135.93 Ze=-143.25 Az status=0009 Ze status=0009 09:22:20 Check angles 09:22:20 SkyScan query 09:22:21 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.295<-20153 Statuses=0009 0009 09:22:21 Msec=750 True Az=153.435 Ze=-122.295 Az status=0009 Ze status=0009 09:22:21 Check angles 09:22:21 SkyScan query 09:22:22 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.355<-18757 Statuses=0009 0009 09:22:22 Msec=1500 True Az=170.835 Ze=-101.355 Az status=0009 Ze status=0009 09:22:22 Check angles 09:22:22 SkyScan query 09:22:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.4<-17360 Statuses=0008 0009 09:22:22 Msec=2250 True Az=176.025 Ze=-80.4 Az status=0008 Ze status=0009 09:22:23 Check angles 09:22:23 SkyScan query 09:22:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.43<-15962 Statuses=0008 0009 09:22:23 Msec=3000 True Az=175.995 Ze=-59.43 Az status=0008 Ze status=0009 09:22:23 Check angles 09:22:23 SkyScan query 09:22:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:22:24 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:22:24 Message to Master queued w/err=0: serial=6677 error=0 09:22:29 Received message from Master: op=Filter serial=6678 09:22:29 Color wheel filter change from 0 to 0 09:22:29 FLIGetFilterPos err=0 currentPosition=0 09:22:29 FLIGetStepsRemaining err=0 RemainingSteps=0 09:22:29 Filter is already there-color wheel unchanged 09:22:29 Received message from Master: op=Shutter serial=6679 09:22:29 Shutter LASER close 09:22:29 Received message from Camera: op=State serial=6681 09:22:29 GetSingleValue result=40 Value=cccccccc 09:22:29 SkyScan query 09:22:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:22:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:30 Parameters OK 09:22:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:30 Set A/D data flow result=40 09:22:30 Set A/D channel type result=40 09:22:30 Set A/D encoding result=40 09:22:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:30 Set channel filter=0.000000e+000 result=40 09:22:30 Config A/D Result=40 09:22:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:30 Get A/D filter: -9.255963e+061 result=40 09:22:30 Get A/D value=-858993460 result=40 09:22:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:22:30 Parameters OK 09:22:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:22:30 Set A/D data flow result=40 09:22:30 Set A/D channel type result=40 09:22:30 Set A/D encoding result=40 09:22:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:22:30 Set channel filter=0.000000e+000 result=40 09:22:30 Config A/D Result=40 09:22:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:22:30 Get A/D filter: -9.255963e+061 result=40 09:22:30 Get A/D value=-858993460 result=40 09:22:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:22:30 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:22:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:22:30 Aux= 09:22:30 Message to Camera, serial 6681 queued 09:23:01 Received message from Master: op=PointingHead serial=6688 09:23:01 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:23:01 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:23:01 Point started: ret=0 09:23:01 point_skyscan result=0 09:23:02 Check angles 09:23:02 SkyScan query 09:23:02 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.9<-13460 Statuses=0009 0009 09:23:02 Msec=0 True Az=153.18 Ze=-21.9 Az status=0009 Ze status=0009 09:23:03 Check angles 09:23:03 SkyScan query 09:23:03 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.495<-12033 Statuses=0009 0009 09:23:03 Msec=750 True Az=135.36 Ze=-0.495 Az status=0009 Ze status=0009 09:23:03 Check angles 09:23:03 SkyScan query 09:23:04 SkyScan query done: ret=0 az=117.78<-7852 ze=20.445<-10637 Statuses=0009 0009 09:23:04 Msec=1500 True Az=117.78 Ze=20.445 Az status=0009 Ze status=0009 09:23:04 Check angles 09:23:04 SkyScan query 09:23:05 SkyScan query done: ret=0 az=100.41<-6694 ze=41.4<-9240 Statuses=0009 0009 09:23:05 Msec=2250 True Az=100.41 Ze=41.4 Az status=0009 Ze status=0009 09:23:05 Check angles 09:23:05 SkyScan query 09:23:05 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 09:23:05 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 09:23:06 Check angles 09:23:06 SkyScan query 09:23:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:23:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:23:06 Message to Master queued w/err=0: serial=6688 error=0 09:23:11 Received message from Master: op=Filter serial=6689 09:23:11 Color wheel filter change from 0 to 0 09:23:11 FLIGetFilterPos err=0 currentPosition=0 09:23:11 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:11 Filter is already there-color wheel unchanged 09:23:11 Received message from Master: op=Shutter serial=6690 09:23:11 Shutter LASER close 09:23:11 Received message from Camera: op=State serial=6692 09:23:11 GetSingleValue result=40 Value=cccccccc 09:23:11 SkyScan query 09:23:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:23:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:12 Parameters OK 09:23:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:12 Set A/D data flow result=40 09:23:12 Set A/D channel type result=40 09:23:12 Set A/D encoding result=40 09:23:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:12 Set channel filter=0.000000e+000 result=40 09:23:12 Config A/D Result=40 09:23:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:12 Get A/D filter: -9.255963e+061 result=40 09:23:12 Get A/D value=-858993460 result=40 09:23:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:12 Parameters OK 09:23:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:12 Set A/D data flow result=40 09:23:12 Set A/D channel type result=40 09:23:12 Set A/D encoding result=40 09:23:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:12 Set channel filter=0.000000e+000 result=40 09:23:12 Config A/D Result=40 09:23:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:12 Get A/D filter: -9.255963e+061 result=40 09:23:12 Get A/D value=-858993460 result=40 09:23:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:12 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:12 Aux= 09:23:12 Message to Camera, serial 6692 queued 09:23:43 Received message from Master: op=PointingHead serial=6699 09:23:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:23:43 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:23:43 Point started: ret=0 09:23:43 point_skyscan result=0 09:23:44 Check angles 09:23:44 SkyScan query 09:23:44 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 09:23:44 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 09:23:45 Check angles 09:23:45 SkyScan query 09:23:45 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 09:23:45 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 09:23:45 Check angles 09:23:45 SkyScan query 09:23:46 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 09:23:46 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 09:23:46 Check angles 09:23:46 SkyScan query 09:23:47 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 09:23:47 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 09:23:47 Check angles 09:23:47 SkyScan query 09:23:48 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:23:48 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:23:48 Check angles 09:23:48 SkyScan query 09:23:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:23:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:23:48 Message to Master queued w/err=0: serial=6699 error=0 09:23:53 Received message from Master: op=Filter serial=6700 09:23:53 Color wheel filter change from 0 to 0 09:23:53 FLIGetFilterPos err=0 currentPosition=0 09:23:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:23:53 Filter is already there-color wheel unchanged 09:23:53 Received message from Master: op=Shutter serial=6701 09:23:53 Shutter LASER close 09:23:53 Received message from Camera: op=State serial=6703 09:23:53 GetSingleValue result=40 Value=cccccccc 09:23:53 SkyScan query 09:23:54 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:23:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:54 Parameters OK 09:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:54 Set A/D data flow result=40 09:23:54 Set A/D channel type result=40 09:23:54 Set A/D encoding result=40 09:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:54 Set channel filter=0.000000e+000 result=40 09:23:54 Config A/D Result=40 09:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:54 Get A/D filter: -9.255963e+061 result=40 09:23:54 Get A/D value=-858993460 result=40 09:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:23:54 Parameters OK 09:23:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:23:54 Set A/D data flow result=40 09:23:54 Set A/D channel type result=40 09:23:54 Set A/D encoding result=40 09:23:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:23:54 Set channel filter=0.000000e+000 result=40 09:23:54 Config A/D Result=40 09:23:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:23:54 Get A/D filter: -9.255963e+061 result=40 09:23:54 Get A/D value=-858993460 result=40 09:23:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:23:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:23:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:23:54 Aux= 09:23:54 Message to Camera, serial 6703 queued 09:24:25 Received message from Master: op=PointingHead serial=6710 09:24:25 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:24:25 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:24:25 Point started: ret=0 09:24:25 point_skyscan result=0 09:24:26 Check angles 09:24:26 SkyScan query 09:24:27 SkyScan query done: ret=0 az=152.475<-10165 ze=8.19<-11454 Statuses=0009 0009 09:24:27 Msec=0 True Az=152.475 Ze=8.19 Az status=0009 Ze status=0009 09:24:27 Check angles 09:24:27 SkyScan query 09:24:27 SkyScan query done: ret=0 az=135.09<-9006 ze=-12.765<-12851 Statuses=0009 0009 09:24:27 Msec=750 True Az=135.09 Ze=-12.765 Az status=0009 Ze status=0009 09:24:28 Check angles 09:24:28 SkyScan query 09:24:28 SkyScan query done: ret=0 az=117.075<-7805 ze=-34.14<-14276 Statuses=0009 0009 09:24:28 Msec=1500 True Az=117.075 Ze=-34.14 Az status=0009 Ze status=0009 09:24:28 Check angles 09:24:28 SkyScan query 09:24:29 SkyScan query done: ret=0 az=99.645<-6643 ze=-51.555<-15437 Statuses=0009 0009 09:24:29 Msec=2250 True Az=99.645 Ze=-51.555 Az status=0009 Ze status=0009 09:24:29 Check angles 09:24:29 SkyScan query 09:24:30 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:24:30 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:24:30 Check angles 09:24:30 SkyScan query 09:24:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:24:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:24:30 Message to Master queued w/err=0: serial=6710 error=0 09:24:35 Received message from Master: op=Filter serial=6711 09:24:35 Color wheel filter change from 0 to 0 09:24:35 FLIGetFilterPos err=0 currentPosition=0 09:24:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:24:35 Filter is already there-color wheel unchanged 09:24:36 Received message from Master: op=Shutter serial=6712 09:24:36 Shutter LASER close 09:24:36 Received message from Camera: op=State serial=6714 09:24:36 GetSingleValue result=40 Value=cccccccc 09:24:36 SkyScan query 09:24:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:24:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:36 Parameters OK 09:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:36 Set A/D data flow result=40 09:24:36 Set A/D channel type result=40 09:24:36 Set A/D encoding result=40 09:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:36 Set channel filter=0.000000e+000 result=40 09:24:36 Config A/D Result=40 09:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:36 Get A/D filter: -9.255963e+061 result=40 09:24:36 Get A/D value=-858993460 result=40 09:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:24:36 Parameters OK 09:24:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:24:36 Set A/D data flow result=40 09:24:36 Set A/D channel type result=40 09:24:36 Set A/D encoding result=40 09:24:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:24:36 Set channel filter=0.000000e+000 result=40 09:24:36 Config A/D Result=40 09:24:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:24:36 Get A/D filter: -9.255963e+061 result=40 09:24:36 Get A/D value=-858993460 result=40 09:24:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:24:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:24:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:24:36 Aux= 09:24:36 Message to Camera, serial 6714 queued 09:25:07 Received message from Master: op=PointingHead serial=6721 09:25:07 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:25:07 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:25:07 Point started: ret=0 09:25:07 point_skyscan result=0 09:25:08 Check angles 09:25:08 SkyScan query 09:25:09 SkyScan query done: ret=0 az=109.53<-7302 ze=-81.78<-17452 Statuses=0009 0009 09:25:09 Msec=0 True Az=109.53 Ze=-81.78 Az status=0009 Ze status=0009 09:25:09 Check angles 09:25:09 SkyScan query 09:25:09 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.735<-18849 Statuses=0008 0009 09:25:09 Msec=750 True Az=113.01 Ze=-102.735 Az status=0008 Ze status=0009 09:25:10 Check angles 09:25:10 SkyScan query 09:25:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.11<-20274 Statuses=0008 0009 09:25:10 Msec=1500 True Az=112.995 Ze=-124.11 Az status=0008 Ze status=0009 09:25:10 Check angles 09:25:10 SkyScan query 09:25:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 09:25:11 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 09:25:11 Check angles 09:25:11 SkyScan query 09:25:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-166.005<-23067 Statuses=0008 0009 09:25:12 Msec=3000 True Az=113.01 Ze=-166.005 Az status=0008 Ze status=0009 09:25:12 Check angles 09:25:12 SkyScan query 09:25:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:25:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:25:12 Message to Master queued w/err=0: serial=6721 error=0 09:25:17 Received message from Master: op=Filter serial=6722 09:25:17 Color wheel filter change from 0 to 0 09:25:17 FLIGetFilterPos err=0 currentPosition=0 09:25:17 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:17 Filter is already there-color wheel unchanged 09:25:18 Received message from Master: op=Shutter serial=6723 09:25:18 Shutter LASER open 09:25:18 Received message from Camera: op=State serial=6725 09:25:18 GetSingleValue result=40 Value=cccccccc 09:25:18 SkyScan query 09:25:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:25:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:18 Parameters OK 09:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:18 Set A/D data flow result=40 09:25:18 Set A/D channel type result=40 09:25:18 Set A/D encoding result=40 09:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:18 Set channel filter=0.000000e+000 result=40 09:25:18 Config A/D Result=40 09:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:18 Get A/D filter: -9.255963e+061 result=40 09:25:18 Get A/D value=-858993460 result=40 09:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:18 Parameters OK 09:25:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:18 Set A/D data flow result=40 09:25:18 Set A/D channel type result=40 09:25:18 Set A/D encoding result=40 09:25:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:18 Set channel filter=0.000000e+000 result=40 09:25:18 Config A/D Result=40 09:25:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:18 Get A/D filter: -9.255963e+061 result=40 09:25:18 Get A/D value=-858993460 result=40 09:25:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:18 Aux= 09:25:18 Message to Camera, serial 6725 queued 09:25:21 Received message from Master: op=Shutter serial=6729 09:25:21 Shutter LASER close 09:25:21 Received message from Master: op=PointingHead serial=6733 09:25:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:25:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:25:22 Point started: ret=0 09:25:22 point_skyscan result=0 09:25:22 Check angles 09:25:22 SkyScan query 09:25:23 SkyScan query done: ret=0 az=89.61<-5974 ze=156.915<-1539 Statuses=0009 0009 09:25:23 Msec=0 True Az=89.61 Ze=156.915 Az status=0009 Ze status=0009 09:25:23 Check angles 09:25:23 SkyScan query 09:25:24 SkyScan query done: ret=0 az=72.12<-4808 ze=135.945<-2937 Statuses=0009 0009 09:25:24 Msec=750 True Az=72.12 Ze=135.945 Az status=0009 Ze status=0009 09:25:24 Check angles 09:25:24 SkyScan query 09:25:25 SkyScan query done: ret=0 az=54.54<-3636 ze=114.585<-4361 Statuses=0009 0009 09:25:25 Msec=1500 True Az=54.54 Ze=114.585 Az status=0009 Ze status=0009 09:25:25 Check angles 09:25:25 SkyScan query 09:25:25 SkyScan query done: ret=0 az=40.89<-2726 ze=93.615<-5759 Statuses=0009 0009 09:25:25 Msec=2250 True Az=40.89 Ze=93.615 Az status=0009 Ze status=0009 09:25:25 Check angles 09:25:25 SkyScan query 09:25:26 SkyScan query done: ret=0 az=41.01<-2734 ze=72.645<-7157 Statuses=0008 0009 09:25:26 Msec=3000 True Az=41.01 Ze=72.645 Az status=0008 Ze status=0009 09:25:26 Check angles 09:25:26 SkyScan query 09:25:27 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 09:25:27 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 09:25:27 Check angles 09:25:27 SkyScan query 09:25:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:25:28 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:25:28 Message to Master queued w/err=0: serial=6733 error=0 09:25:33 Received message from Master: op=Filter serial=6734 09:25:33 Color wheel filter change from 0 to 0 09:25:33 FLIGetFilterPos err=0 currentPosition=0 09:25:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:25:33 Filter is already there-color wheel unchanged 09:25:33 Received message from Master: op=Shutter serial=6735 09:25:33 Shutter LASER close 09:25:33 Received message from Camera: op=State serial=6737 09:25:33 GetSingleValue result=40 Value=cccccccc 09:25:33 SkyScan query 09:25:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:33 Parameters OK 09:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:33 Set A/D data flow result=40 09:25:33 Set A/D channel type result=40 09:25:33 Set A/D encoding result=40 09:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:33 Set channel filter=0.000000e+000 result=40 09:25:33 Config A/D Result=40 09:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:33 Get A/D filter: -9.255963e+061 result=40 09:25:33 Get A/D value=-858993460 result=40 09:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:25:33 Parameters OK 09:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:25:33 Set A/D data flow result=40 09:25:33 Set A/D channel type result=40 09:25:33 Set A/D encoding result=40 09:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:25:33 Set channel filter=0.000000e+000 result=40 09:25:33 Config A/D Result=40 09:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:25:33 Get A/D filter: -9.255963e+061 result=40 09:25:33 Get A/D value=-858993460 result=40 09:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:25:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:25:33 Aux= 09:25:33 Message to Camera, serial 6737 queued 09:26:04 Received message from Master: op=PointingHead serial=6744 09:26:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:26:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:26:05 Point started: ret=0 09:26:05 point_skyscan result=0 09:26:05 Check angles 09:26:05 SkyScan query 09:26:06 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 09:26:06 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 09:26:06 Check angles 09:26:06 SkyScan query 09:26:07 SkyScan query done: ret=0 az=81.36<-5424 ze=66.495<-7567 Statuses=0009 0008 09:26:07 Msec=750 True Az=81.36 Ze=66.495 Az status=0009 Ze status=0008 09:26:07 Check angles 09:26:07 SkyScan query 09:26:08 SkyScan query done: ret=0 az=99.015<-6601 ze=66.495<-7567 Statuses=0009 0008 09:26:08 Msec=1500 True Az=99.015 Ze=66.495 Az status=0009 Ze status=0008 09:26:08 Check angles 09:26:08 SkyScan query 09:26:08 SkyScan query done: ret=0 az=116.43<-7762 ze=66.495<-7567 Statuses=0009 0008 09:26:08 Msec=2250 True Az=116.43 Ze=66.495 Az status=0009 Ze status=0008 09:26:08 Check angles 09:26:08 SkyScan query 09:26:09 SkyScan query done: ret=0 az=133.95<-8930 ze=66.495<-7567 Statuses=0009 0008 09:26:09 Msec=3000 True Az=133.95 Ze=66.495 Az status=0009 Ze status=0008 09:26:09 Check angles 09:26:09 SkyScan query 09:26:10 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 09:26:10 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 09:26:10 Check angles 09:26:10 SkyScan query 09:26:11 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:26:11 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:26:11 Message to Master queued w/err=0: serial=6744 error=0 09:26:16 Received message from Master: op=Filter serial=6745 09:26:16 Color wheel filter change from 0 to 0 09:26:16 FLIGetFilterPos err=0 currentPosition=0 09:26:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:16 Filter is already there-color wheel unchanged 09:26:16 Received message from Master: op=Shutter serial=6746 09:26:16 Shutter LASER close 09:26:16 Received message from Camera: op=State serial=6748 09:26:16 GetSingleValue result=40 Value=cccccccc 09:26:16 SkyScan query 09:26:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:26:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:16 Parameters OK 09:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:16 Set A/D data flow result=40 09:26:16 Set A/D channel type result=40 09:26:16 Set A/D encoding result=40 09:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:16 Set channel filter=0.000000e+000 result=40 09:26:16 Config A/D Result=40 09:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:16 Get A/D filter: -9.255963e+061 result=40 09:26:16 Get A/D value=-858993460 result=40 09:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:16 Parameters OK 09:26:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:16 Set A/D data flow result=40 09:26:16 Set A/D channel type result=40 09:26:16 Set A/D encoding result=40 09:26:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:16 Set channel filter=0.000000e+000 result=40 09:26:16 Config A/D Result=40 09:26:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:16 Get A/D filter: -9.255963e+061 result=40 09:26:16 Get A/D value=-858993460 result=40 09:26:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:16 Aux= 09:26:16 Message to Camera, serial 6748 queued 09:26:47 Received message from Master: op=PointingHead serial=6755 09:26:47 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:26:47 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:26:48 Point started: ret=0 09:26:48 point_skyscan result=0 09:26:48 Check angles 09:26:48 SkyScan query 09:26:49 SkyScan query done: ret=0 az=135.195<-9013 ze=36.885<-9541 Statuses=0009 0009 09:26:49 Msec=0 True Az=135.195 Ze=36.885 Az status=0009 Ze status=0009 09:26:49 Check angles 09:26:49 SkyScan query 09:26:50 SkyScan query done: ret=0 az=117.48<-7832 ze=15.915<-10939 Statuses=0009 0009 09:26:50 Msec=750 True Az=117.48 Ze=15.915 Az status=0009 Ze status=0009 09:26:50 Check angles 09:26:50 SkyScan query 09:26:50 SkyScan query done: ret=0 az=99.93<-6662 ze=-5.475<-12365 Statuses=0009 0009 09:26:50 Msec=1500 True Az=99.93 Ze=-5.475 Az status=0009 Ze status=0009 09:26:51 Check angles 09:26:51 SkyScan query 09:26:51 SkyScan query done: ret=0 az=82.095<-5473 ze=-26.85<-13790 Statuses=0009 0009 09:26:51 Msec=2250 True Az=82.095 Ze=-26.85 Az status=0009 Ze status=0009 09:26:51 Check angles 09:26:51 SkyScan query 09:26:52 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.55<-14570 Statuses=0009 0008 09:26:52 Msec=3000 True Az=64.62 Ze=-38.55 Az status=0009 Ze status=0008 09:26:52 Check angles 09:26:52 SkyScan query 09:26:53 SkyScan query done: ret=0 az=47.16<-3144 ze=-38.535<-14569 Statuses=0009 0008 09:26:53 Msec=3750 True Az=47.16 Ze=-38.535 Az status=0009 Ze status=0008 09:26:53 Check angles 09:26:53 SkyScan query 09:26:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:26:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:26:53 Message to Master queued w/err=0: serial=6755 error=0 09:26:58 Received message from Master: op=Filter serial=6756 09:26:58 Color wheel filter change from 0 to 0 09:26:58 FLIGetFilterPos err=0 currentPosition=0 09:26:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:26:58 Filter is already there-color wheel unchanged 09:26:59 Received message from Master: op=Shutter serial=6757 09:26:59 Shutter LASER close 09:26:59 Received message from Camera: op=State serial=6759 09:26:59 GetSingleValue result=40 Value=cccccccc 09:26:59 SkyScan query 09:26:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:26:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:59 Parameters OK 09:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:59 Set A/D data flow result=40 09:26:59 Set A/D channel type result=40 09:26:59 Set A/D encoding result=40 09:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:59 Set channel filter=0.000000e+000 result=40 09:26:59 Config A/D Result=40 09:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:59 Get A/D filter: -9.255963e+061 result=40 09:26:59 Get A/D value=-858993460 result=40 09:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:26:59 Parameters OK 09:26:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:26:59 Set A/D data flow result=40 09:26:59 Set A/D channel type result=40 09:26:59 Set A/D encoding result=40 09:26:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:26:59 Set channel filter=0.000000e+000 result=40 09:26:59 Config A/D Result=40 09:26:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:26:59 Get A/D filter: -9.255963e+061 result=40 09:26:59 Get A/D value=-858993460 result=40 09:26:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:26:59 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:26:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:26:59 Aux= 09:26:59 Message to Camera, serial 6759 queued 09:27:30 Received message from Master: op=PointingHead serial=6766 09:27:30 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:27:30 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:27:30 Point started: ret=0 09:27:30 point_skyscan result=0 09:27:31 Check angles 09:27:31 SkyScan query 09:27:32 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.61<-16574 Statuses=0009 0009 09:27:32 Msec=0 True Az=64.17 Ze=-68.61 Az status=0009 Ze status=0009 09:27:32 Check angles 09:27:32 SkyScan query 09:27:32 SkyScan query done: ret=0 az=82.365<-5491 ze=-90<-18000 Statuses=0009 0009 09:27:32 Msec=750 True Az=82.365 Ze=-90 Az status=0009 Ze status=0009 09:27:33 Check angles 09:27:33 SkyScan query 09:27:33 SkyScan query done: ret=0 az=99.72<-6648 ze=-110.955<-19397 Statuses=0009 0009 09:27:33 Msec=1500 True Az=99.72 Ze=-110.955 Az status=0009 Ze status=0009 09:27:33 Check angles 09:27:33 SkyScan query 09:27:34 SkyScan query done: ret=0 az=117.06<-7804 ze=-131.91<-20794 Statuses=0009 0009 09:27:34 Msec=2250 True Az=117.06 Ze=-131.91 Az status=0009 Ze status=0009 09:27:34 Check angles 09:27:34 SkyScan query 09:27:35 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 09:27:35 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 09:27:35 Check angles 09:27:35 SkyScan query 09:27:36 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:27:36 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:27:36 Message to Master queued w/err=0: serial=6766 error=0 09:27:41 Received message from Master: op=Filter serial=6767 09:27:41 Color wheel filter change from 0 to 0 09:27:41 FLIGetFilterPos err=0 currentPosition=0 09:27:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:27:41 Filter is already there-color wheel unchanged 09:27:41 Received message from Master: op=Shutter serial=6768 09:27:41 Shutter LASER close 09:27:41 Received message from Camera: op=State serial=6770 09:27:41 GetSingleValue result=40 Value=cccccccc 09:27:41 SkyScan query 09:27:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:27:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:41 Parameters OK 09:27:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:41 Set A/D data flow result=40 09:27:41 Set A/D channel type result=40 09:27:41 Set A/D encoding result=40 09:27:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:41 Set channel filter=0.000000e+000 result=40 09:27:41 Config A/D Result=40 09:27:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:41 Get A/D filter: -9.255963e+061 result=40 09:27:41 Get A/D value=-858993460 result=40 09:27:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:27:41 Parameters OK 09:27:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:27:41 Set A/D data flow result=40 09:27:41 Set A/D channel type result=40 09:27:41 Set A/D encoding result=40 09:27:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:27:41 Set channel filter=0.000000e+000 result=40 09:27:41 Config A/D Result=40 09:27:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:27:41 Get A/D filter: -9.255963e+061 result=40 09:27:41 Get A/D value=-858993460 result=40 09:27:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:27:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:27:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:27:41 Aux= 09:27:41 Message to Camera, serial 6770 queued 09:28:12 Received message from Master: op=PointingHead serial=6777 09:28:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:28:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:28:12 Point started: ret=0 09:28:12 point_skyscan result=0 09:28:13 Check angles 09:28:13 SkyScan query 09:28:14 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.21<-23414 Statuses=0009 0009 09:28:14 Msec=0 True Az=113.025 Ze=-171.21 Az status=0009 Ze status=0009 09:28:14 Check angles 09:28:14 SkyScan query 09:28:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:28:15 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:28:15 Message to Master queued w/err=0: serial=6777 error=0 09:28:20 Received message from Master: op=Filter serial=6778 09:28:20 Color wheel filter change from 0 to 0 09:28:20 FLIGetFilterPos err=0 currentPosition=0 09:28:20 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:20 Filter is already there-color wheel unchanged 09:28:20 Received message from Master: op=Shutter serial=6779 09:28:20 Shutter LASER open 09:28:20 Received message from Camera: op=State serial=6781 09:28:20 GetSingleValue result=40 Value=cccccccc 09:28:20 SkyScan query 09:28:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:28:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:21 Parameters OK 09:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:21 Set A/D data flow result=40 09:28:21 Set A/D channel type result=40 09:28:21 Set A/D encoding result=40 09:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:21 Set channel filter=0.000000e+000 result=40 09:28:21 Config A/D Result=40 09:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:21 Get A/D filter: -9.255963e+061 result=40 09:28:21 Get A/D value=-858993460 result=40 09:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:21 Parameters OK 09:28:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:21 Set A/D data flow result=40 09:28:21 Set A/D channel type result=40 09:28:21 Set A/D encoding result=40 09:28:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:21 Set channel filter=0.000000e+000 result=40 09:28:21 Config A/D Result=40 09:28:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:21 Get A/D filter: -9.255963e+061 result=40 09:28:21 Get A/D value=-858993460 result=40 09:28:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:21 Aux= 09:28:21 Message to Camera, serial 6781 queued 09:28:23 Received message from Master: op=Shutter serial=6785 09:28:23 Shutter LASER close 09:28:24 Received message from Master: op=PointingHead serial=6789 09:28:24 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:28:24 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:28:24 Point started: ret=0 09:28:24 point_skyscan result=0 09:28:25 Check angles 09:28:25 SkyScan query 09:28:25 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.145<-21543 Statuses=0009 0009 09:28:25 Msec=0 True Az=135.975 Ze=-143.145 Az status=0009 Ze status=0009 09:28:25 Check angles 09:28:25 SkyScan query 09:28:26 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.755<-20117 Statuses=0009 0009 09:28:26 Msec=750 True Az=153.9 Ze=-121.755 Az status=0009 Ze status=0009 09:28:26 Check angles 09:28:26 SkyScan query 09:28:27 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.35<-18690 Statuses=0009 0009 09:28:27 Msec=1500 True Az=171.69 Ze=-100.35 Az status=0009 Ze status=0009 09:28:27 Check angles 09:28:27 SkyScan query 09:28:28 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.41<-17294 Statuses=0008 0009 09:28:28 Msec=2250 True Az=176.01 Ze=-79.41 Az status=0008 Ze status=0009 09:28:28 Check angles 09:28:28 SkyScan query 09:28:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.455<-15897 Statuses=0008 0009 09:28:28 Msec=3000 True Az=175.995 Ze=-58.455 Az status=0008 Ze status=0009 09:28:28 Check angles 09:28:28 SkyScan query 09:28:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:28:29 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:28:29 Message to Master queued w/err=0: serial=6789 error=0 09:28:34 Received message from Master: op=Filter serial=6790 09:28:34 Color wheel filter change from 0 to 0 09:28:34 FLIGetFilterPos err=0 currentPosition=0 09:28:34 FLIGetStepsRemaining err=0 RemainingSteps=0 09:28:34 Filter is already there-color wheel unchanged 09:28:34 Received message from Master: op=Shutter serial=6791 09:28:34 Shutter LASER close 09:28:34 Received message from Camera: op=State serial=6793 09:28:34 GetSingleValue result=40 Value=cccccccc 09:28:34 SkyScan query 09:28:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:28:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:35 Parameters OK 09:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:35 Set A/D data flow result=40 09:28:35 Set A/D channel type result=40 09:28:35 Set A/D encoding result=40 09:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:35 Set channel filter=0.000000e+000 result=40 09:28:35 Config A/D Result=40 09:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:35 Get A/D filter: -9.255963e+061 result=40 09:28:35 Get A/D value=-858993460 result=40 09:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:28:35 Parameters OK 09:28:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:28:35 Set A/D data flow result=40 09:28:35 Set A/D channel type result=40 09:28:35 Set A/D encoding result=40 09:28:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:28:35 Set channel filter=0.000000e+000 result=40 09:28:35 Config A/D Result=40 09:28:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:28:35 Get A/D filter: -9.255963e+061 result=40 09:28:35 Get A/D value=-858993460 result=40 09:28:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:28:35 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:28:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:28:35 Aux= 09:28:35 Message to Camera, serial 6793 queued 09:29:06 Received message from Master: op=PointingHead serial=6800 09:29:06 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:29:06 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:29:06 Point started: ret=0 09:29:06 point_skyscan result=0 09:29:07 Check angles 09:29:07 SkyScan query 09:29:07 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.96<-13464 Statuses=0009 0009 09:29:07 Msec=0 True Az=153.165 Ze=-21.96 Az status=0009 Ze status=0009 [UTC 2018-12-4 09:29:08] 09:29:08 Check angles 09:29:08 SkyScan query 09:29:08 SkyScan query done: ret=0 az=134.235<-8949 ze=0.72<-11952 Statuses=0009 0009 09:29:08 Msec=750 True Az=134.235 Ze=0.72 Az status=0009 Ze status=0009 09:29:08 Check angles 09:29:08 SkyScan query 09:29:09 SkyScan query done: ret=0 az=118.185<-7879 ze=19.95<-10670 Statuses=0009 0009 09:29:09 Msec=1500 True Az=118.185 Ze=19.95 Az status=0009 Ze status=0009 09:29:09 Check angles 09:29:09 SkyScan query 09:29:10 SkyScan query done: ret=0 az=100.785<-6719 ze=40.89<-9274 Statuses=0009 0009 09:29:10 Msec=2250 True Az=100.785 Ze=40.89 Az status=0009 Ze status=0009 09:29:10 Check angles 09:29:10 SkyScan query 09:29:10 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:29:10 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:29:11 Check angles 09:29:11 SkyScan query 09:29:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:29:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:29:11 Message to Master queued w/err=0: serial=6800 error=0 09:29:16 Received message from Master: op=Filter serial=6801 09:29:16 Color wheel filter change from 0 to 0 09:29:16 FLIGetFilterPos err=0 currentPosition=0 09:29:16 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:16 Filter is already there-color wheel unchanged 09:29:16 Received message from Master: op=Shutter serial=6802 09:29:16 Shutter LASER close 09:29:16 Received message from Camera: op=State serial=6804 09:29:16 GetSingleValue result=40 Value=cccccccc 09:29:16 SkyScan query 09:29:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:29:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:17 Parameters OK 09:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:17 Set A/D data flow result=40 09:29:17 Set A/D channel type result=40 09:29:17 Set A/D encoding result=40 09:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:17 Set channel filter=0.000000e+000 result=40 09:29:17 Config A/D Result=40 09:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:17 Get A/D filter: -9.255963e+061 result=40 09:29:17 Get A/D value=-858993460 result=40 09:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:17 Parameters OK 09:29:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:17 Set A/D data flow result=40 09:29:17 Set A/D channel type result=40 09:29:17 Set A/D encoding result=40 09:29:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:17 Set channel filter=0.000000e+000 result=40 09:29:17 Config A/D Result=40 09:29:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:17 Get A/D filter: -9.255963e+061 result=40 09:29:17 Get A/D value=-858993460 result=40 09:29:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:17 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:17 Aux= 09:29:17 Message to Camera, serial 6804 queued 09:29:48 Received message from Master: op=PointingHead serial=6811 09:29:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:29:48 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:29:48 Point started: ret=0 09:29:48 point_skyscan result=0 09:29:49 Check angles 09:29:49 SkyScan query 09:29:50 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 09:29:50 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 09:29:50 Check angles 09:29:50 SkyScan query 09:29:50 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 09:29:50 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 09:29:50 Check angles 09:29:50 SkyScan query 09:29:51 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 09:29:51 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 09:29:51 Check angles 09:29:51 SkyScan query 09:29:52 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 09:29:52 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 09:29:52 Check angles 09:29:52 SkyScan query 09:29:53 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:29:53 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:29:53 Check angles 09:29:53 SkyScan query 09:29:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:29:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:29:53 Message to Master queued w/err=0: serial=6811 error=0 09:29:58 Received message from Master: op=Filter serial=6812 09:29:58 Color wheel filter change from 0 to 0 09:29:58 FLIGetFilterPos err=0 currentPosition=0 09:29:58 FLIGetStepsRemaining err=0 RemainingSteps=0 09:29:58 Filter is already there-color wheel unchanged 09:29:58 Received message from Master: op=Shutter serial=6813 09:29:58 Shutter LASER close 09:29:58 Received message from Camera: op=State serial=6815 09:29:58 GetSingleValue result=40 Value=cccccccc 09:29:58 SkyScan query 09:29:59 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:29:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:59 Parameters OK 09:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:59 Set A/D data flow result=40 09:29:59 Set A/D channel type result=40 09:29:59 Set A/D encoding result=40 09:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:59 Set channel filter=0.000000e+000 result=40 09:29:59 Config A/D Result=40 09:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:59 Get A/D filter: -9.255963e+061 result=40 09:29:59 Get A/D value=-858993460 result=40 09:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:29:59 Parameters OK 09:29:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:29:59 Set A/D data flow result=40 09:29:59 Set A/D channel type result=40 09:29:59 Set A/D encoding result=40 09:29:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:29:59 Set channel filter=0.000000e+000 result=40 09:29:59 Config A/D Result=40 09:29:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:29:59 Get A/D filter: -9.255963e+061 result=40 09:29:59 Get A/D value=-858993460 result=40 09:29:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:29:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:29:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:29:59 Aux= 09:29:59 Message to Camera, serial 6815 queued 09:30:30 Received message from Master: op=PointingHead serial=6822 09:30:30 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:30:30 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:30:30 Point started: ret=0 09:30:30 point_skyscan result=0 09:30:31 Check angles 09:30:31 SkyScan query 09:30:32 SkyScan query done: ret=0 az=152.79<-10186 ze=8.655<-11423 Statuses=0009 0009 09:30:32 Msec=0 True Az=152.79 Ze=8.655 Az status=0009 Ze status=0009 09:30:32 Check angles 09:30:32 SkyScan query 09:30:32 SkyScan query done: ret=0 az=135.015<-9001 ze=-12.795<-12853 Statuses=0009 0009 09:30:32 Msec=750 True Az=135.015 Ze=-12.795 Az status=0009 Ze status=0009 09:30:33 Check angles 09:30:33 SkyScan query 09:30:33 SkyScan query done: ret=0 az=117.165<-7811 ze=-34.095<-14273 Statuses=0009 0009 09:30:33 Msec=1500 True Az=117.165 Ze=-34.095 Az status=0009 Ze status=0009 09:30:33 Check angles 09:30:33 SkyScan query 09:30:34 SkyScan query done: ret=0 az=99.75<-6650 ze=-51.555<-15437 Statuses=0009 0009 09:30:34 Msec=2250 True Az=99.75 Ze=-51.555 Az status=0009 Ze status=0009 09:30:34 Check angles 09:30:34 SkyScan query 09:30:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 09:30:35 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 09:30:35 Check angles 09:30:35 SkyScan query 09:30:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:30:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:30:35 Message to Master queued w/err=0: serial=6822 error=0 09:30:40 Received message from Master: op=Filter serial=6823 09:30:40 Color wheel filter change from 0 to 0 09:30:40 FLIGetFilterPos err=0 currentPosition=0 09:30:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:30:40 Filter is already there-color wheel unchanged 09:30:41 Received message from Master: op=Shutter serial=6824 09:30:41 Shutter LASER close 09:30:41 Received message from Camera: op=State serial=6826 09:30:41 GetSingleValue result=40 Value=cccccccc 09:30:41 SkyScan query 09:30:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:30:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:41 Parameters OK 09:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:41 Set A/D data flow result=40 09:30:41 Set A/D channel type result=40 09:30:41 Set A/D encoding result=40 09:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:41 Set channel filter=0.000000e+000 result=40 09:30:41 Config A/D Result=40 09:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:41 Get A/D filter: -9.255963e+061 result=40 09:30:41 Get A/D value=-858993460 result=40 09:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:30:41 Parameters OK 09:30:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:30:41 Set A/D data flow result=40 09:30:41 Set A/D channel type result=40 09:30:41 Set A/D encoding result=40 09:30:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:30:41 Set channel filter=0.000000e+000 result=40 09:30:41 Config A/D Result=40 09:30:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:30:41 Get A/D filter: -9.255963e+061 result=40 09:30:41 Get A/D value=-858993460 result=40 09:30:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:30:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:30:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:30:41 Aux= 09:30:41 Message to Camera, serial 6826 queued 09:31:12 Received message from Master: op=PointingHead serial=6833 09:31:12 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:31:12 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:31:12 Point started: ret=0 09:31:12 point_skyscan result=0 09:31:13 Check angles 09:31:13 SkyScan query 09:31:14 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.42<-17428 Statuses=0009 0009 09:31:14 Msec=0 True Az=109.17 Ze=-81.42 Az status=0009 Ze status=0009 09:31:14 Check angles 09:31:14 SkyScan query 09:31:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 09:31:14 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 09:31:15 Check angles 09:31:15 SkyScan query 09:31:15 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.72<-20248 Statuses=0008 0009 09:31:15 Msec=1500 True Az=113.01 Ze=-123.72 Az status=0008 Ze status=0009 09:31:15 Check angles 09:31:15 SkyScan query 09:31:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.14<-21676 Statuses=0008 0009 09:31:16 Msec=2250 True Az=112.995 Ze=-145.14 Az status=0008 Ze status=0009 09:31:16 Check angles 09:31:16 SkyScan query 09:31:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-166.05<-23070 Statuses=0008 0009 09:31:17 Msec=3000 True Az=113.01 Ze=-166.05 Az status=0008 Ze status=0009 09:31:17 Check angles 09:31:17 SkyScan query 09:31:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:31:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:31:17 Message to Master queued w/err=0: serial=6833 error=0 09:31:22 Received message from Master: op=Filter serial=6834 09:31:22 Color wheel filter change from 0 to 0 09:31:22 FLIGetFilterPos err=0 currentPosition=0 09:31:22 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:22 Filter is already there-color wheel unchanged 09:31:23 Received message from Master: op=Shutter serial=6835 09:31:23 Shutter LASER open 09:31:23 Received message from Camera: op=State serial=6837 09:31:23 GetSingleValue result=40 Value=cccccccc 09:31:23 SkyScan query 09:31:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:31:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:23 Parameters OK 09:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:23 Set A/D data flow result=40 09:31:23 Set A/D channel type result=40 09:31:23 Set A/D encoding result=40 09:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:23 Set channel filter=0.000000e+000 result=40 09:31:23 Config A/D Result=40 09:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:23 Get A/D filter: -9.255963e+061 result=40 09:31:23 Get A/D value=-858993460 result=40 09:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:23 Parameters OK 09:31:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:23 Set A/D data flow result=40 09:31:23 Set A/D channel type result=40 09:31:23 Set A/D encoding result=40 09:31:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:23 Set channel filter=0.000000e+000 result=40 09:31:23 Config A/D Result=40 09:31:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:23 Get A/D filter: -9.255963e+061 result=40 09:31:23 Get A/D value=-858993460 result=40 09:31:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:23 Aux= 09:31:23 Message to Camera, serial 6837 queued 09:31:26 Received message from Master: op=Shutter serial=6841 09:31:26 Shutter LASER close 09:31:26 Received message from Master: op=PointingHead serial=6845 09:31:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:31:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:31:27 Point started: ret=0 09:31:27 point_skyscan result=0 09:31:27 Check angles 09:31:27 SkyScan query 09:31:28 SkyScan query done: ret=0 az=90.06<-6004 ze=157.365<-1509 Statuses=0009 0009 09:31:28 Msec=0 True Az=90.06 Ze=157.365 Az status=0009 Ze status=0009 09:31:28 Check angles 09:31:28 SkyScan query 09:31:29 SkyScan query done: ret=0 az=72.675<-4845 ze=136.425<-2905 Statuses=0009 0009 09:31:29 Msec=750 True Az=72.675 Ze=136.425 Az status=0009 Ze status=0009 09:31:29 Check angles 09:31:29 SkyScan query 09:31:30 SkyScan query done: ret=0 az=55.095<-3673 ze=115.455<-4303 Statuses=0009 0009 09:31:30 Msec=1500 True Az=55.095 Ze=115.455 Az status=0009 Ze status=0009 09:31:30 Check angles 09:31:30 SkyScan query 09:31:30 SkyScan query done: ret=0 az=40.83<-2722 ze=94.5<-5700 Statuses=0009 0009 09:31:30 Msec=2250 True Az=40.83 Ze=94.5 Az status=0009 Ze status=0009 09:31:30 Check angles 09:31:30 SkyScan query 09:31:31 SkyScan query done: ret=0 az=41.01<-2734 ze=73.56<-7096 Statuses=0008 0009 09:31:31 Msec=3000 True Az=41.01 Ze=73.56 Az status=0008 Ze status=0009 09:31:31 Check angles 09:31:31 SkyScan query 09:31:32 SkyScan query done: ret=0 az=40.995<-2733 ze=52.935<-8471 Statuses=0008 0009 09:31:32 Msec=3750 True Az=40.995 Ze=52.935 Az status=0008 Ze status=0009 09:31:32 Check angles 09:31:32 SkyScan query 09:31:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:31:33 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:31:33 Message to Master queued w/err=0: serial=6845 error=0 09:31:38 Received message from Master: op=Filter serial=6846 09:31:38 Color wheel filter change from 0 to 0 09:31:38 FLIGetFilterPos err=0 currentPosition=0 09:31:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:31:38 Filter is already there-color wheel unchanged 09:31:38 Received message from Master: op=Shutter serial=6847 09:31:38 Shutter LASER close 09:31:38 Received message from Camera: op=State serial=6849 09:31:38 GetSingleValue result=40 Value=cccccccc 09:31:38 SkyScan query 09:31:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:38 Parameters OK 09:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:38 Set A/D data flow result=40 09:31:38 Set A/D channel type result=40 09:31:38 Set A/D encoding result=40 09:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:38 Set channel filter=0.000000e+000 result=40 09:31:38 Config A/D Result=40 09:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:38 Get A/D filter: -9.255963e+061 result=40 09:31:38 Get A/D value=-858993460 result=40 09:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:31:38 Parameters OK 09:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:31:38 Set A/D data flow result=40 09:31:38 Set A/D channel type result=40 09:31:38 Set A/D encoding result=40 09:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:31:38 Set channel filter=0.000000e+000 result=40 09:31:38 Config A/D Result=40 09:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:31:38 Get A/D filter: -9.255963e+061 result=40 09:31:38 Get A/D value=-858993460 result=40 09:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:31:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:31:38 Aux= 09:31:38 Message to Camera, serial 6849 queued [UTC 2018-12-4 09:32:09] 09:32:09 Received message from Master: op=PointingHead serial=6856 09:32:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:32:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:32:10 Point started: ret=0 09:32:10 point_skyscan result=0 09:32:10 Check angles 09:32:10 SkyScan query 09:32:11 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 09:32:11 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 09:32:11 Check angles 09:32:11 SkyScan query 09:32:12 SkyScan query done: ret=0 az=81.915<-5461 ze=66.495<-7567 Statuses=0009 0008 09:32:12 Msec=750 True Az=81.915 Ze=66.495 Az status=0009 Ze status=0008 09:32:12 Check angles 09:32:12 SkyScan query 09:32:13 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 09:32:13 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 09:32:13 Check angles 09:32:13 SkyScan query 09:32:13 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 09:32:13 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 09:32:13 Check angles 09:32:13 SkyScan query 09:32:14 SkyScan query done: ret=0 az=134.355<-8957 ze=66.495<-7567 Statuses=0009 0008 09:32:14 Msec=3000 True Az=134.355 Ze=66.495 Az status=0009 Ze status=0008 09:32:14 Check angles 09:32:14 SkyScan query 09:32:15 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 09:32:15 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 09:32:15 Check angles 09:32:15 SkyScan query 09:32:16 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:32:16 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:32:16 Message to Master queued w/err=0: serial=6856 error=0 09:32:21 Received message from Master: op=Filter serial=6857 09:32:21 Color wheel filter change from 0 to 0 09:32:21 FLIGetFilterPos err=0 currentPosition=0 09:32:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:32:21 Filter is already there-color wheel unchanged 09:32:21 Received message from Master: op=Shutter serial=6858 09:32:21 Shutter LASER close 09:32:21 Received message from Camera: op=State serial=6860 09:32:21 GetSingleValue result=40 Value=cccccccc 09:32:21 SkyScan query 09:32:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:32:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:21 Parameters OK 09:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:21 Set A/D data flow result=40 09:32:21 Set A/D channel type result=40 09:32:21 Set A/D encoding result=40 09:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:21 Set channel filter=0.000000e+000 result=40 09:32:21 Config A/D Result=40 09:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:21 Get A/D filter: -9.255963e+061 result=40 09:32:21 Get A/D value=-858993460 result=40 09:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:32:21 Parameters OK 09:32:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:32:21 Set A/D data flow result=40 09:32:21 Set A/D channel type result=40 09:32:21 Set A/D encoding result=40 09:32:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:32:21 Set channel filter=0.000000e+000 result=40 09:32:21 Config A/D Result=40 09:32:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:32:21 Get A/D filter: -9.255963e+061 result=40 09:32:21 Get A/D value=-858993460 result=40 09:32:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:32:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:32:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:32:21 Aux= 09:32:21 Message to Camera, serial 6860 queued 09:32:52 Received message from Master: op=PointingHead serial=6867 09:32:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:32:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:32:52 Point started: ret=0 09:32:52 point_skyscan result=0 09:32:53 Check angles 09:32:53 SkyScan query 09:32:54 SkyScan query done: ret=0 az=134.565<-8971 ze=36.21<-9586 Statuses=0009 0009 09:32:54 Msec=0 True Az=134.565 Ze=36.21 Az status=0009 Ze status=0009 09:32:54 Check angles 09:32:54 SkyScan query 09:32:55 SkyScan query done: ret=0 az=116.52<-7768 ze=14.34<-11044 Statuses=0009 0009 09:32:55 Msec=750 True Az=116.52 Ze=14.34 Az status=0009 Ze status=0009 09:32:55 Check angles 09:32:55 SkyScan query 09:32:55 SkyScan query done: ret=0 az=99.285<-6619 ze=-6.195<-12413 Statuses=0009 0009 09:32:55 Msec=1500 True Az=99.285 Ze=-6.195 Az status=0009 Ze status=0009 09:32:56 Check angles 09:32:56 SkyScan query 09:32:56 SkyScan query done: ret=0 az=81.84<-5456 ze=-27.09<-13806 Statuses=0009 0009 09:32:56 Msec=2250 True Az=81.84 Ze=-27.09 Az status=0009 Ze status=0009 09:32:56 Check angles 09:32:56 SkyScan query 09:32:57 SkyScan query done: ret=0 az=64.365<-4291 ze=-38.565<-14571 Statuses=0009 0008 09:32:57 Msec=3000 True Az=64.365 Ze=-38.565 Az status=0009 Ze status=0008 09:32:57 Check angles 09:32:57 SkyScan query 09:32:58 SkyScan query done: ret=0 az=46.905<-3127 ze=-38.52<-14568 Statuses=0009 0008 09:32:58 Msec=3750 True Az=46.905 Ze=-38.52 Az status=0009 Ze status=0008 09:32:58 Check angles 09:32:58 SkyScan query 09:32:58 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 09:32:58 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 09:32:58 Message to Master queued w/err=0: serial=6867 error=0 09:33:03 Received message from Master: op=Filter serial=6868 09:33:03 Color wheel filter change from 0 to 0 09:33:03 FLIGetFilterPos err=0 currentPosition=0 09:33:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:03 Filter is already there-color wheel unchanged 09:33:04 Received message from Master: op=Shutter serial=6869 09:33:04 Shutter LASER close 09:33:04 Received message from Camera: op=State serial=6871 09:33:04 GetSingleValue result=40 Value=cccccccc 09:33:04 SkyScan query 09:33:04 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:33:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:04 Parameters OK 09:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:04 Set A/D data flow result=40 09:33:04 Set A/D channel type result=40 09:33:04 Set A/D encoding result=40 09:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:04 Set channel filter=0.000000e+000 result=40 09:33:04 Config A/D Result=40 09:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:04 Get A/D filter: -9.255963e+061 result=40 09:33:04 Get A/D value=-858993460 result=40 09:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:04 Parameters OK 09:33:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:04 Set A/D data flow result=40 09:33:04 Set A/D channel type result=40 09:33:04 Set A/D encoding result=40 09:33:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:04 Set channel filter=0.000000e+000 result=40 09:33:04 Config A/D Result=40 09:33:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:04 Get A/D filter: -9.255963e+061 result=40 09:33:04 Get A/D value=-858993460 result=40 09:33:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:04 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:04 Aux= 09:33:04 Message to Camera, serial 6871 queued 09:33:35 Received message from Master: op=PointingHead serial=6878 09:33:35 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:33:35 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:33:35 Point started: ret=0 09:33:35 point_skyscan result=0 09:33:36 Check angles 09:33:36 SkyScan query 09:33:37 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.25<-16550 Statuses=0009 0009 09:33:37 Msec=0 True Az=63.87 Ze=-68.25 Az status=0009 Ze status=0009 09:33:37 Check angles 09:33:37 SkyScan query 09:33:37 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.655<-17977 Statuses=0009 0009 09:33:37 Msec=750 True Az=81.9 Ze=-89.655 Az status=0009 Ze status=0009 09:33:38 Check angles 09:33:38 SkyScan query 09:33:38 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.58<-19372 Statuses=0009 0009 09:33:38 Msec=1500 True Az=99.36 Ze=-110.58 Az status=0009 Ze status=0009 09:33:38 Check angles 09:33:38 SkyScan query 09:33:39 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.535<-20769 Statuses=0009 0009 09:33:39 Msec=2250 True Az=116.805 Ze=-131.535 Az status=0009 Ze status=0009 09:33:39 Check angles 09:33:39 SkyScan query 09:33:40 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 09:33:40 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 09:33:40 Check angles 09:33:40 SkyScan query 09:33:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:33:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:33:40 Message to Master queued w/err=0: serial=6878 error=0 09:33:45 Received message from Master: op=Filter serial=6879 09:33:45 Color wheel filter change from 0 to 0 09:33:45 FLIGetFilterPos err=0 currentPosition=0 09:33:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:33:45 Filter is already there-color wheel unchanged 09:33:46 Received message from Master: op=Shutter serial=6880 09:33:46 Shutter LASER close 09:33:46 Received message from Camera: op=State serial=6882 09:33:46 GetSingleValue result=40 Value=cccccccc 09:33:46 SkyScan query 09:33:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:33:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:46 Parameters OK 09:33:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:46 Set A/D data flow result=40 09:33:46 Set A/D channel type result=40 09:33:46 Set A/D encoding result=40 09:33:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:46 Set channel filter=0.000000e+000 result=40 09:33:46 Config A/D Result=40 09:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:46 Get A/D filter: -9.255963e+061 result=40 09:33:46 Get A/D value=-858993460 result=40 09:33:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:33:46 Parameters OK 09:33:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:33:46 Set A/D data flow result=40 09:33:46 Set A/D channel type result=40 09:33:46 Set A/D encoding result=40 09:33:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:33:46 Set channel filter=0.000000e+000 result=40 09:33:46 Config A/D Result=40 09:33:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:33:46 Get A/D filter: -9.255963e+061 result=40 09:33:46 Get A/D value=-858993460 result=40 09:33:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:33:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:33:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:33:46 Aux= 09:33:46 Message to Camera, serial 6882 queued 09:34:17 Received message from Master: op=PointingHead serial=6889 09:34:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:34:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:34:17 Point started: ret=0 09:34:17 point_skyscan result=0 09:34:18 Check angles 09:34:18 SkyScan query 09:34:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.315<-23421 Statuses=0009 0009 09:34:19 Msec=0 True Az=113.01 Ze=-171.315 Az status=0009 Ze status=0009 09:34:19 Check angles 09:34:19 SkyScan query 09:34:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:34:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:34:20 Message to Master queued w/err=0: serial=6889 error=0 09:34:25 Received message from Master: op=Filter serial=6890 09:34:25 Color wheel filter change from 0 to 0 09:34:25 FLIGetFilterPos err=0 currentPosition=0 09:34:25 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:25 Filter is already there-color wheel unchanged 09:34:25 Received message from Master: op=Shutter serial=6891 09:34:25 Shutter LASER open 09:34:25 Received message from Camera: op=State serial=6893 09:34:25 GetSingleValue result=40 Value=cccccccc 09:34:25 SkyScan query 09:34:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:34:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:25 Parameters OK 09:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:25 Set A/D data flow result=40 09:34:25 Set A/D channel type result=40 09:34:25 Set A/D encoding result=40 09:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:25 Set channel filter=0.000000e+000 result=40 09:34:25 Config A/D Result=40 09:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:25 Get A/D filter: -9.255963e+061 result=40 09:34:25 Get A/D value=-858993460 result=40 09:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:25 Parameters OK 09:34:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:25 Set A/D data flow result=40 09:34:25 Set A/D channel type result=40 09:34:25 Set A/D encoding result=40 09:34:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:25 Set channel filter=0.000000e+000 result=40 09:34:25 Config A/D Result=40 09:34:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:25 Get A/D filter: -9.255963e+061 result=40 09:34:25 Get A/D value=-858993460 result=40 09:34:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:25 Aux= 09:34:25 Message to Camera, serial 6893 queued 09:34:28 Received message from Master: op=Shutter serial=6897 09:34:28 Shutter LASER close 09:34:28 Received message from Master: op=PointingHead serial=6901 09:34:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:34:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:34:29 Point started: ret=0 09:34:29 point_skyscan result=0 09:34:30 Check angles 09:34:30 SkyScan query 09:34:30 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.55<-21570 Statuses=0009 0009 09:34:30 Msec=0 True Az=135.75 Ze=-143.55 Az status=0009 Ze status=0009 09:34:30 Check angles 09:34:30 SkyScan query 09:34:31 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.145<-20143 Statuses=0009 0009 09:34:31 Msec=750 True Az=153.615 Ze=-122.145 Az status=0009 Ze status=0009 09:34:31 Check angles 09:34:31 SkyScan query 09:34:32 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.22<-18748 Statuses=0009 0009 09:34:32 Msec=1500 True Az=170.925 Ze=-101.22 Az status=0009 Ze status=0009 09:34:32 Check angles 09:34:32 SkyScan query 09:34:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.265<-17351 Statuses=0008 0009 09:34:32 Msec=2250 True Az=176.025 Ze=-80.265 Az status=0008 Ze status=0009 09:34:33 Check angles 09:34:33 SkyScan query 09:34:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.31<-15954 Statuses=0008 0009 09:34:33 Msec=3000 True Az=175.995 Ze=-59.31 Az status=0008 Ze status=0009 09:34:33 Check angles 09:34:33 SkyScan query 09:34:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:34:34 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:34:34 Message to Master queued w/err=0: serial=6901 error=0 09:34:39 Received message from Master: op=Filter serial=6902 09:34:39 Color wheel filter change from 0 to 0 09:34:39 FLIGetFilterPos err=0 currentPosition=0 09:34:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:34:39 Filter is already there-color wheel unchanged 09:34:39 Received message from Master: op=Shutter serial=6903 09:34:39 Shutter LASER close 09:34:39 Received message from Camera: op=State serial=6905 09:34:39 GetSingleValue result=40 Value=cccccccc 09:34:39 SkyScan query 09:34:40 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:34:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:40 Parameters OK 09:34:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:40 Set A/D data flow result=40 09:34:40 Set A/D channel type result=40 09:34:40 Set A/D encoding result=40 09:34:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:40 Set channel filter=0.000000e+000 result=40 09:34:40 Config A/D Result=40 09:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:40 Get A/D filter: -9.255963e+061 result=40 09:34:40 Get A/D value=-858993460 result=40 09:34:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:34:40 Parameters OK 09:34:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:34:40 Set A/D data flow result=40 09:34:40 Set A/D channel type result=40 09:34:40 Set A/D encoding result=40 09:34:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:34:40 Set channel filter=0.000000e+000 result=40 09:34:40 Config A/D Result=40 09:34:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:34:40 Get A/D filter: -9.255963e+061 result=40 09:34:40 Get A/D value=-858993460 result=40 09:34:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:34:40 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:34:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:34:40 Aux= 09:34:40 Message to Camera, serial 6905 queued 09:35:11 Received message from Master: op=PointingHead serial=6912 09:35:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:35:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:35:11 Point started: ret=0 09:35:11 point_skyscan result=0 09:35:12 Check angles 09:35:12 SkyScan query 09:35:12 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.57<-13438 Statuses=0009 0009 09:35:12 Msec=0 True Az=152.91 Ze=-21.57 Az status=0009 Ze status=0009 09:35:13 Check angles 09:35:13 SkyScan query 09:35:13 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.6<-12040 Statuses=0009 0009 09:35:13 Msec=750 True Az=135.435 Ze=-0.6 Az status=0009 Ze status=0009 09:35:13 Check angles 09:35:13 SkyScan query 09:35:14 SkyScan query done: ret=0 az=117.81<-7854 ze=20.34<-10644 Statuses=0009 0009 09:35:14 Msec=1500 True Az=117.81 Ze=20.34 Az status=0009 Ze status=0009 09:35:14 Check angles 09:35:14 SkyScan query 09:35:15 SkyScan query done: ret=0 az=100.425<-6695 ze=41.31<-9246 Statuses=0009 0009 09:35:15 Msec=2250 True Az=100.425 Ze=41.31 Az status=0009 Ze status=0009 09:35:15 Check angles 09:35:15 SkyScan query 09:35:15 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 09:35:15 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 09:35:16 Check angles 09:35:16 SkyScan query 09:35:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:35:16 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:35:16 Message to Master queued w/err=0: serial=6912 error=0 09:35:21 Received message from Master: op=Filter serial=6913 09:35:21 Color wheel filter change from 0 to 0 09:35:21 FLIGetFilterPos err=0 currentPosition=0 09:35:21 FLIGetStepsRemaining err=0 RemainingSteps=0 09:35:21 Filter is already there-color wheel unchanged 09:35:21 Received message from Master: op=Shutter serial=6914 09:35:21 Shutter LASER close 09:35:21 Received message from Camera: op=State serial=6916 09:35:21 GetSingleValue result=40 Value=cccccccc 09:35:21 SkyScan query 09:35:22 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:35:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:22 Parameters OK 09:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:22 Set A/D data flow result=40 09:35:22 Set A/D channel type result=40 09:35:22 Set A/D encoding result=40 09:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:22 Set channel filter=0.000000e+000 result=40 09:35:22 Config A/D Result=40 09:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:22 Get A/D filter: -9.255963e+061 result=40 09:35:22 Get A/D value=-858993460 result=40 09:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:35:22 Parameters OK 09:35:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:35:22 Set A/D data flow result=40 09:35:22 Set A/D channel type result=40 09:35:22 Set A/D encoding result=40 09:35:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:35:22 Set channel filter=0.000000e+000 result=40 09:35:22 Config A/D Result=40 09:35:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:35:22 Get A/D filter: -9.255963e+061 result=40 09:35:22 Get A/D value=-858993460 result=40 09:35:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:35:22 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:35:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:35:22 Aux= 09:35:22 Message to Camera, serial 6916 queued 09:35:53 Received message from Master: op=PointingHead serial=6923 09:35:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:35:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:35:53 Point started: ret=0 09:35:53 point_skyscan result=0 09:35:54 Check angles 09:35:54 SkyScan query 09:35:54 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 09:35:54 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 09:35:55 Check angles 09:35:55 SkyScan query 09:35:55 SkyScan query done: ret=0 az=126.75<-8450 ze=38.505<-9433 Statuses=0009 0008 09:35:55 Msec=750 True Az=126.75 Ze=38.505 Az status=0009 Ze status=0008 09:35:55 Check angles 09:35:55 SkyScan query 09:35:56 SkyScan query done: ret=0 az=144.24<-9616 ze=38.505<-9433 Statuses=0009 0008 09:35:56 Msec=1500 True Az=144.24 Ze=38.505 Az status=0009 Ze status=0008 09:35:56 Check angles 09:35:56 SkyScan query 09:35:57 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 09:35:57 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 09:35:57 Check angles 09:35:57 SkyScan query 09:35:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:35:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:35:58 Check angles 09:35:58 SkyScan query 09:35:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:35:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:35:58 Message to Master queued w/err=0: serial=6923 error=0 09:36:03 Received message from Master: op=Filter serial=6924 09:36:03 Color wheel filter change from 0 to 0 09:36:03 FLIGetFilterPos err=0 currentPosition=0 09:36:03 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:03 Filter is already there-color wheel unchanged 09:36:03 Received message from Master: op=Shutter serial=6925 09:36:03 Shutter LASER close 09:36:03 Received message from Camera: op=State serial=6927 09:36:03 GetSingleValue result=40 Value=cccccccc 09:36:03 SkyScan query 09:36:04 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:36:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:04 Parameters OK 09:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:04 Set A/D data flow result=40 09:36:04 Set A/D channel type result=40 09:36:04 Set A/D encoding result=40 09:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:04 Set channel filter=0.000000e+000 result=40 09:36:04 Config A/D Result=40 09:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:04 Get A/D filter: -9.255963e+061 result=40 09:36:04 Get A/D value=-858993460 result=40 09:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:04 Parameters OK 09:36:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:04 Set A/D data flow result=40 09:36:04 Set A/D channel type result=40 09:36:04 Set A/D encoding result=40 09:36:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:04 Set channel filter=0.000000e+000 result=40 09:36:04 Config A/D Result=40 09:36:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:04 Get A/D filter: -9.255963e+061 result=40 09:36:04 Get A/D value=-858993460 result=40 09:36:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:04 Aux= 09:36:04 Message to Camera, serial 6927 queued 09:36:35 Received message from Master: op=PointingHead serial=6934 09:36:35 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:36:35 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:36:35 Point started: ret=0 09:36:35 point_skyscan result=0 09:36:36 Check angles 09:36:36 SkyScan query 09:36:37 SkyScan query done: ret=0 az=152.775<-10185 ze=8.655<-11423 Statuses=0009 0009 09:36:37 Msec=0 True Az=152.775 Ze=8.655 Az status=0009 Ze status=0009 09:36:37 Check angles 09:36:37 SkyScan query 09:36:37 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.3<-12820 Statuses=0009 0009 09:36:37 Msec=750 True Az=135.375 Ze=-12.3 Az status=0009 Ze status=0009 09:36:37 Check angles 09:36:37 SkyScan query 09:36:38 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.24<-14216 Statuses=0009 0009 09:36:38 Msec=1500 True Az=117.825 Ze=-33.24 Az status=0009 Ze status=0009 09:36:38 Check angles 09:36:38 SkyScan query 09:36:39 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.525<-15435 Statuses=0009 0009 09:36:39 Msec=2250 True Az=100.44 Ze=-51.525 Az status=0009 Ze status=0009 09:36:39 Check angles 09:36:39 SkyScan query 09:36:40 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 09:36:40 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 09:36:40 Check angles 09:36:40 SkyScan query 09:36:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:36:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:36:40 Message to Master queued w/err=0: serial=6934 error=0 09:36:45 Received message from Master: op=Filter serial=6935 09:36:45 Color wheel filter change from 0 to 0 09:36:45 FLIGetFilterPos err=0 currentPosition=0 09:36:45 FLIGetStepsRemaining err=0 RemainingSteps=0 09:36:45 Filter is already there-color wheel unchanged 09:36:45 Received message from Master: op=Shutter serial=6936 09:36:45 Shutter LASER close 09:36:46 Received message from Camera: op=State serial=6938 09:36:46 GetSingleValue result=40 Value=cccccccc 09:36:46 SkyScan query 09:36:46 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:36:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:46 Parameters OK 09:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:46 Set A/D data flow result=40 09:36:46 Set A/D channel type result=40 09:36:46 Set A/D encoding result=40 09:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:46 Set channel filter=0.000000e+000 result=40 09:36:46 Config A/D Result=40 09:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:46 Get A/D filter: -9.255963e+061 result=40 09:36:46 Get A/D value=-858993460 result=40 09:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:36:46 Parameters OK 09:36:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:36:46 Set A/D data flow result=40 09:36:46 Set A/D channel type result=40 09:36:46 Set A/D encoding result=40 09:36:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:36:46 Set channel filter=0.000000e+000 result=40 09:36:46 Config A/D Result=40 09:36:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:36:46 Get A/D filter: -9.255963e+061 result=40 09:36:46 Get A/D value=-858993460 result=40 09:36:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:36:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:36:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:36:46 Aux= 09:36:46 Message to Camera, serial 6938 queued 09:37:17 Received message from Master: op=PointingHead serial=6945 09:37:17 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:37:17 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:37:17 Point started: ret=0 09:37:17 point_skyscan result=0 09:37:18 Check angles 09:37:18 SkyScan query 09:37:19 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.525<-17435 Statuses=0009 0009 09:37:19 Msec=0 True Az=109.185 Ze=-81.525 Az status=0009 Ze status=0009 09:37:19 Check angles 09:37:19 SkyScan query 09:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.915<-18861 Statuses=0008 0009 09:37:20 Msec=750 True Az=112.995 Ze=-102.915 Az status=0008 Ze status=0009 09:37:20 Check angles 09:37:20 SkyScan query 09:37:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 09:37:20 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 09:37:20 Check angles 09:37:20 SkyScan query 09:37:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 09:37:21 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 09:37:21 Check angles 09:37:21 SkyScan query 09:37:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 09:37:22 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 09:37:22 Check angles 09:37:22 SkyScan query 09:37:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 09:37:23 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 09:37:23 Message to Master queued w/err=0: serial=6945 error=0 09:37:28 Received message from Master: op=Filter serial=6946 09:37:28 Color wheel filter change from 0 to 0 09:37:28 FLIGetFilterPos err=0 currentPosition=0 09:37:28 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:28 Filter is already there-color wheel unchanged 09:37:28 Received message from Master: op=Shutter serial=6947 09:37:28 Shutter LASER open 09:37:28 Received message from Camera: op=State serial=6949 09:37:28 GetSingleValue result=40 Value=cccccccc 09:37:28 SkyScan query 09:37:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:37:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:28 Parameters OK 09:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:28 Set A/D data flow result=40 09:37:28 Set A/D channel type result=40 09:37:28 Set A/D encoding result=40 09:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:28 Set channel filter=0.000000e+000 result=40 09:37:28 Config A/D Result=40 09:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:28 Get A/D filter: -9.255963e+061 result=40 09:37:28 Get A/D value=-858993460 result=40 09:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:28 Parameters OK 09:37:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:28 Set A/D data flow result=40 09:37:28 Set A/D channel type result=40 09:37:28 Set A/D encoding result=40 09:37:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:28 Set channel filter=0.000000e+000 result=40 09:37:28 Config A/D Result=40 09:37:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:28 Get A/D filter: -9.255963e+061 result=40 09:37:28 Get A/D value=-858993460 result=40 09:37:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:28 Aux= 09:37:28 Message to Camera, serial 6949 queued 09:37:31 Received message from Master: op=Shutter serial=6953 09:37:31 Shutter LASER close 09:37:31 Received message from Master: op=PointingHead serial=6957 09:37:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:37:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:37:32 Point started: ret=0 09:37:32 point_skyscan result=0 09:37:32 Check angles 09:37:32 SkyScan query 09:37:33 SkyScan query done: ret=0 az=89.67<-5978 ze=156.945<-1537 Statuses=0009 0009 09:37:33 Msec=0 True Az=89.67 Ze=156.945 Az status=0009 Ze status=0009 09:37:33 Check angles 09:37:33 SkyScan query 09:37:34 SkyScan query done: ret=0 az=72.105<-4807 ze=135.975<-2935 Statuses=0009 0009 09:37:34 Msec=750 True Az=72.105 Ze=135.975 Az status=0009 Ze status=0009 09:37:34 Check angles 09:37:34 SkyScan query 09:37:35 SkyScan query done: ret=0 az=54.54<-3636 ze=114.615<-4359 Statuses=0009 0009 09:37:35 Msec=1500 True Az=54.54 Ze=114.615 Az status=0009 Ze status=0009 09:37:35 Check angles 09:37:35 SkyScan query 09:37:35 SkyScan query done: ret=0 az=40.905<-2727 ze=93.66<-5756 Statuses=0009 0009 09:37:35 Msec=2250 True Az=40.905 Ze=93.66 Az status=0009 Ze status=0009 09:37:35 Check angles 09:37:35 SkyScan query 09:37:36 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 09:37:36 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 09:37:36 Check angles 09:37:36 SkyScan query 09:37:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 09:37:37 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 09:37:37 Check angles 09:37:37 SkyScan query 09:37:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:37:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:37:38 Message to Master queued w/err=0: serial=6957 error=0 09:37:43 Received message from Master: op=Filter serial=6958 09:37:43 Color wheel filter change from 0 to 0 09:37:43 FLIGetFilterPos err=0 currentPosition=0 09:37:43 FLIGetStepsRemaining err=0 RemainingSteps=0 09:37:43 Filter is already there-color wheel unchanged 09:37:43 Received message from Master: op=Shutter serial=6959 09:37:43 Shutter LASER close 09:37:43 Received message from Camera: op=State serial=6961 09:37:43 GetSingleValue result=40 Value=cccccccc 09:37:43 SkyScan query 09:37:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:37:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:43 Parameters OK 09:37:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:43 Set A/D data flow result=40 09:37:43 Set A/D channel type result=40 09:37:43 Set A/D encoding result=40 09:37:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:43 Set channel filter=0.000000e+000 result=40 09:37:43 Config A/D Result=40 09:37:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:43 Get A/D filter: -9.255963e+061 result=40 09:37:43 Get A/D value=-858993460 result=40 09:37:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:37:43 Parameters OK 09:37:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:37:43 Set A/D data flow result=40 09:37:43 Set A/D channel type result=40 09:37:43 Set A/D encoding result=40 09:37:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:37:43 Set channel filter=0.000000e+000 result=40 09:37:43 Config A/D Result=40 09:37:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:37:43 Get A/D filter: -9.255963e+061 result=40 09:37:43 Get A/D value=-858993460 result=40 09:37:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:37:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:37:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:37:43 Aux= 09:37:43 Message to Camera, serial 6961 queued 09:38:14 Received message from Master: op=PointingHead serial=6968 09:38:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:38:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:38:15 Point started: ret=0 09:38:15 point_skyscan result=0 09:38:15 Check angles 09:38:15 SkyScan query 09:38:16 SkyScan query done: ret=0 az=63.66<-4244 ze=66.555<-7563 Statuses=0009 0008 09:38:16 Msec=0 True Az=63.66 Ze=66.555 Az status=0009 Ze status=0008 09:38:16 Check angles 09:38:16 SkyScan query 09:38:17 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 09:38:17 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 09:38:17 Check angles 09:38:17 SkyScan query 09:38:18 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 09:38:18 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 09:38:18 Check angles 09:38:18 SkyScan query 09:38:18 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 09:38:18 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 09:38:18 Check angles 09:38:18 SkyScan query 09:38:19 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 09:38:19 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 09:38:19 Check angles 09:38:19 SkyScan query 09:38:20 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 09:38:20 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 09:38:20 Check angles 09:38:20 SkyScan query 09:38:21 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:38:21 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:38:21 Message to Master queued w/err=0: serial=6968 error=0 09:38:26 Received message from Master: op=Filter serial=6969 09:38:26 Color wheel filter change from 0 to 0 09:38:26 FLIGetFilterPos err=0 currentPosition=0 09:38:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:38:26 Filter is already there-color wheel unchanged 09:38:26 Received message from Master: op=Shutter serial=6970 09:38:26 Shutter LASER close 09:38:26 Received message from Camera: op=State serial=6972 09:38:26 GetSingleValue result=40 Value=cccccccc 09:38:26 SkyScan query 09:38:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:38:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:26 Parameters OK 09:38:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:26 Set A/D data flow result=40 09:38:26 Set A/D channel type result=40 09:38:26 Set A/D encoding result=40 09:38:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:26 Set channel filter=0.000000e+000 result=40 09:38:26 Config A/D Result=40 09:38:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:26 Get A/D filter: -9.255963e+061 result=40 09:38:26 Get A/D value=-858993460 result=40 09:38:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:38:26 Parameters OK 09:38:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:38:26 Set A/D data flow result=40 09:38:26 Set A/D channel type result=40 09:38:26 Set A/D encoding result=40 09:38:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:38:26 Set channel filter=0.000000e+000 result=40 09:38:26 Config A/D Result=40 09:38:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:38:26 Get A/D filter: -9.255963e+061 result=40 09:38:26 Get A/D value=-858993460 result=40 09:38:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:38:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:38:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:38:26 Aux= 09:38:26 Message to Camera, serial 6972 queued 09:38:57 Received message from Master: op=PointingHead serial=6979 09:38:57 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:38:57 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:38:58 Point started: ret=0 09:38:58 point_skyscan result=0 09:38:58 Check angles 09:38:58 SkyScan query 09:38:59 SkyScan query done: ret=0 az=135.045<-9003 ze=36.75<-9550 Statuses=0009 0009 09:38:59 Msec=0 True Az=135.045 Ze=36.75 Az status=0009 Ze status=0009 09:38:59 Check angles 09:38:59 SkyScan query 09:39:00 SkyScan query done: ret=0 az=117.54<-7836 ze=15.795<-10947 Statuses=0009 0009 09:39:00 Msec=750 True Az=117.54 Ze=15.795 Az status=0009 Ze status=0009 09:39:00 Check angles 09:39:00 SkyScan query 09:39:00 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.61<-12374 Statuses=0009 0009 09:39:00 Msec=1500 True Az=99.855 Ze=-5.61 Az status=0009 Ze status=0009 09:39:01 Check angles 09:39:01 SkyScan query 09:39:01 SkyScan query done: ret=0 az=81.975<-5465 ze=-26.985<-13799 Statuses=0009 0009 09:39:01 Msec=2250 True Az=81.975 Ze=-26.985 Az status=0009 Ze status=0009 09:39:01 Check angles 09:39:01 SkyScan query 09:39:02 SkyScan query done: ret=0 az=64.5<-4300 ze=-38.55<-14570 Statuses=0009 0008 09:39:02 Msec=3000 True Az=64.5 Ze=-38.55 Az status=0009 Ze status=0008 09:39:02 Check angles 09:39:02 SkyScan query 09:39:03 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.535<-14569 Statuses=0009 0008 09:39:03 Msec=3750 True Az=47.04 Ze=-38.535 Az status=0009 Ze status=0008 09:39:03 Check angles 09:39:03 SkyScan query 09:39:03 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 09:39:03 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 09:39:03 Message to Master queued w/err=0: serial=6979 error=0 09:39:08 Received message from Master: op=Filter serial=6980 09:39:08 Color wheel filter change from 0 to 0 09:39:08 FLIGetFilterPos err=0 currentPosition=0 09:39:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:08 Filter is already there-color wheel unchanged 09:39:09 Received message from Master: op=Shutter serial=6981 09:39:09 Shutter LASER close 09:39:09 Received message from Camera: op=State serial=6983 09:39:09 GetSingleValue result=40 Value=cccccccc 09:39:09 SkyScan query 09:39:09 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:39:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:09 Parameters OK 09:39:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:09 Set A/D data flow result=40 09:39:09 Set A/D channel type result=40 09:39:09 Set A/D encoding result=40 09:39:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:09 Set channel filter=0.000000e+000 result=40 09:39:09 Config A/D Result=40 09:39:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:09 Get A/D filter: -9.255963e+061 result=40 09:39:09 Get A/D value=-858993460 result=40 09:39:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:09 Parameters OK 09:39:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:09 Set A/D data flow result=40 09:39:09 Set A/D channel type result=40 09:39:09 Set A/D encoding result=40 09:39:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:09 Set channel filter=0.000000e+000 result=40 09:39:09 Config A/D Result=40 09:39:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:09 Get A/D filter: -9.255963e+061 result=40 09:39:09 Get A/D value=-858993460 result=40 09:39:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:09 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:09 Aux= 09:39:09 Message to Camera, serial 6983 queued 09:39:40 Received message from Master: op=PointingHead serial=6990 09:39:40 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:39:40 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:39:40 Point started: ret=0 09:39:40 point_skyscan result=0 09:39:41 Check angles 09:39:41 SkyScan query 09:39:42 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.73<-16582 Statuses=0009 0009 09:39:42 Msec=0 True Az=64.23 Ze=-68.73 Az status=0009 Ze status=0009 09:39:42 Check angles 09:39:42 SkyScan query 09:39:42 SkyScan query done: ret=0 az=82.38<-5492 ze=-90.12<-18008 Statuses=0009 0009 09:39:42 Msec=750 True Az=82.38 Ze=-90.12 Az status=0009 Ze status=0009 09:39:43 Check angles 09:39:43 SkyScan query 09:39:43 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.06<-19404 Statuses=0009 0009 09:39:43 Msec=1500 True Az=99.705 Ze=-111.06 Az status=0009 Ze status=0009 09:39:43 Check angles 09:39:43 SkyScan query 09:39:44 SkyScan query done: ret=0 az=117.105<-7807 ze=-132.015<-20801 Statuses=0009 0009 09:39:44 Msec=2250 True Az=117.105 Ze=-132.015 Az status=0009 Ze status=0009 09:39:44 Check angles 09:39:44 SkyScan query 09:39:45 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 09:39:45 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 09:39:45 Check angles 09:39:45 SkyScan query 09:39:46 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:39:46 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:39:46 Message to Master queued w/err=0: serial=6990 error=0 09:39:51 Received message from Master: op=Filter serial=6991 09:39:51 Color wheel filter change from 0 to 0 09:39:51 FLIGetFilterPos err=0 currentPosition=0 09:39:51 FLIGetStepsRemaining err=0 RemainingSteps=0 09:39:51 Filter is already there-color wheel unchanged 09:39:51 Received message from Master: op=Shutter serial=6992 09:39:51 Shutter LASER close 09:39:51 Received message from Camera: op=State serial=6994 09:39:51 GetSingleValue result=40 Value=cccccccc 09:39:51 SkyScan query 09:39:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:39:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:51 Parameters OK 09:39:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:51 Set A/D data flow result=40 09:39:51 Set A/D channel type result=40 09:39:51 Set A/D encoding result=40 09:39:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:51 Set channel filter=0.000000e+000 result=40 09:39:51 Config A/D Result=40 09:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:51 Get A/D filter: -9.255963e+061 result=40 09:39:51 Get A/D value=-858993460 result=40 09:39:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:39:51 Parameters OK 09:39:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:39:51 Set A/D data flow result=40 09:39:51 Set A/D channel type result=40 09:39:51 Set A/D encoding result=40 09:39:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:39:51 Set channel filter=0.000000e+000 result=40 09:39:51 Config A/D Result=40 09:39:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:39:51 Get A/D filter: -9.255963e+061 result=40 09:39:51 Get A/D value=-858993460 result=40 09:39:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:39:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:39:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:39:51 Aux= 09:39:51 Message to Camera, serial 6994 queued 09:40:22 Received message from Master: op=PointingHead serial=7001 09:40:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:40:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:40:23 Point started: ret=0 09:40:23 point_skyscan result=0 09:40:23 Check angles 09:40:23 SkyScan query 09:40:24 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.15<-23410 Statuses=0009 0009 09:40:24 Msec=0 True Az=113.025 Ze=-171.15 Az status=0009 Ze status=0009 09:40:24 Check angles 09:40:24 SkyScan query 09:40:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:40:25 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:40:25 Message to Master queued w/err=0: serial=7001 error=0 09:40:30 Received message from Master: op=Filter serial=7002 09:40:30 Color wheel filter change from 0 to 0 09:40:30 FLIGetFilterPos err=0 currentPosition=0 09:40:30 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:30 Filter is already there-color wheel unchanged 09:40:30 Received message from Master: op=Shutter serial=7003 09:40:30 Shutter LASER open 09:40:30 Received message from Camera: op=State serial=7005 09:40:30 GetSingleValue result=40 Value=cccccccc 09:40:30 SkyScan query 09:40:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:40:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:31 Parameters OK 09:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:31 Set A/D data flow result=40 09:40:31 Set A/D channel type result=40 09:40:31 Set A/D encoding result=40 09:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:31 Set channel filter=0.000000e+000 result=40 09:40:31 Config A/D Result=40 09:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:31 Get A/D filter: -9.255963e+061 result=40 09:40:31 Get A/D value=-858993460 result=40 09:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:31 Parameters OK 09:40:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:31 Set A/D data flow result=40 09:40:31 Set A/D channel type result=40 09:40:31 Set A/D encoding result=40 09:40:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:31 Set channel filter=0.000000e+000 result=40 09:40:31 Config A/D Result=40 09:40:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:31 Get A/D filter: -9.255963e+061 result=40 09:40:31 Get A/D value=-858993460 result=40 09:40:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:31 Aux= 09:40:31 Message to Camera, serial 7005 queued 09:40:33 Received message from Master: op=Shutter serial=7009 09:40:33 Shutter LASER close 09:40:34 Received message from Master: op=PointingHead serial=7013 09:40:34 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:40:34 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:40:34 Point started: ret=0 09:40:34 point_skyscan result=0 09:40:35 Check angles 09:40:35 SkyScan query 09:40:35 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.77<-21518 Statuses=0009 0009 09:40:35 Msec=0 True Az=136.365 Ze=-142.77 Az status=0009 Ze status=0009 09:40:35 Check angles 09:40:35 SkyScan query [UTC 2018-12-4 09:40:36] 09:40:36 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.8<-20120 Statuses=0009 0009 09:40:36 Msec=750 True Az=153.855 Ze=-121.8 Az status=0009 Ze status=0009 09:40:36 Check angles 09:40:36 SkyScan query 09:40:37 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.875<-18725 Statuses=0009 0009 09:40:37 Msec=1500 True Az=171.27 Ze=-100.875 Az status=0009 Ze status=0009 09:40:37 Check angles 09:40:37 SkyScan query 09:40:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.44<-17296 Statuses=0008 0009 09:40:37 Msec=2250 True Az=176.01 Ze=-79.44 Az status=0008 Ze status=0009 09:40:38 Check angles 09:40:38 SkyScan query 09:40:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.485<-15899 Statuses=0008 0009 09:40:38 Msec=3000 True Az=175.995 Ze=-58.485 Az status=0008 Ze status=0009 09:40:38 Check angles 09:40:38 SkyScan query 09:40:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:40:39 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:40:39 Message to Master queued w/err=0: serial=7013 error=0 09:40:44 Received message from Master: op=Filter serial=7014 09:40:44 Color wheel filter change from 0 to 0 09:40:44 FLIGetFilterPos err=0 currentPosition=0 09:40:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:40:44 Filter is already there-color wheel unchanged 09:40:44 Received message from Master: op=Shutter serial=7015 09:40:44 Shutter LASER close 09:40:44 Received message from Camera: op=State serial=7017 09:40:44 GetSingleValue result=40 Value=cccccccc 09:40:44 SkyScan query 09:40:45 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:40:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:45 Parameters OK 09:40:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:45 Set A/D data flow result=40 09:40:45 Set A/D channel type result=40 09:40:45 Set A/D encoding result=40 09:40:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:45 Set channel filter=0.000000e+000 result=40 09:40:45 Config A/D Result=40 09:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:45 Get A/D filter: -9.255963e+061 result=40 09:40:45 Get A/D value=-858993460 result=40 09:40:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:40:45 Parameters OK 09:40:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:40:45 Set A/D data flow result=40 09:40:45 Set A/D channel type result=40 09:40:45 Set A/D encoding result=40 09:40:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:40:45 Set channel filter=0.000000e+000 result=40 09:40:45 Config A/D Result=40 09:40:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:40:45 Get A/D filter: -9.255963e+061 result=40 09:40:45 Get A/D value=-858993460 result=40 09:40:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:40:45 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:40:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:40:45 Aux= 09:40:45 Message to Camera, serial 7017 queued 09:41:16 Received message from Master: op=PointingHead serial=7024 09:41:16 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:41:16 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:41:16 Point started: ret=0 09:41:16 point_skyscan result=0 09:41:17 Check angles 09:41:17 SkyScan query 09:41:17 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.255<-13417 Statuses=0009 0009 09:41:17 Msec=0 True Az=152.655 Ze=-21.255 Az status=0009 Ze status=0009 09:41:18 Check angles 09:41:18 SkyScan query 09:41:18 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.3<-12020 Statuses=0009 0009 09:41:18 Msec=750 True Az=135.135 Ze=-0.3 Az status=0009 Ze status=0009 09:41:18 Check angles 09:41:18 SkyScan query 09:41:19 SkyScan query done: ret=0 az=117.555<-7837 ze=20.64<-10624 Statuses=0009 0009 09:41:19 Msec=1500 True Az=117.555 Ze=20.64 Az status=0009 Ze status=0009 09:41:19 Check angles 09:41:19 SkyScan query 09:41:20 SkyScan query done: ret=0 az=100.155<-6677 ze=41.595<-9227 Statuses=0009 0009 09:41:20 Msec=2250 True Az=100.155 Ze=41.595 Az status=0009 Ze status=0009 09:41:20 Check angles 09:41:20 SkyScan query 09:41:20 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 09:41:20 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 09:41:21 Check angles 09:41:21 SkyScan query 09:41:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:41:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:41:21 Message to Master queued w/err=0: serial=7024 error=0 09:41:26 Received message from Master: op=Filter serial=7025 09:41:26 Color wheel filter change from 0 to 0 09:41:26 FLIGetFilterPos err=0 currentPosition=0 09:41:26 FLIGetStepsRemaining err=0 RemainingSteps=0 09:41:26 Filter is already there-color wheel unchanged 09:41:26 Received message from Master: op=Shutter serial=7026 09:41:26 Shutter LASER close 09:41:26 Received message from Camera: op=State serial=7028 09:41:26 GetSingleValue result=40 Value=cccccccc 09:41:26 SkyScan query 09:41:27 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:41:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:27 Parameters OK 09:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:27 Set A/D data flow result=40 09:41:27 Set A/D channel type result=40 09:41:27 Set A/D encoding result=40 09:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:27 Set channel filter=0.000000e+000 result=40 09:41:27 Config A/D Result=40 09:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:27 Get A/D filter: -9.255963e+061 result=40 09:41:27 Get A/D value=-858993460 result=40 09:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:41:27 Parameters OK 09:41:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:41:27 Set A/D data flow result=40 09:41:27 Set A/D channel type result=40 09:41:27 Set A/D encoding result=40 09:41:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:41:27 Set channel filter=0.000000e+000 result=40 09:41:27 Config A/D Result=40 09:41:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:41:27 Get A/D filter: -9.255963e+061 result=40 09:41:27 Get A/D value=-858993460 result=40 09:41:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:41:27 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:41:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:41:27 Aux= 09:41:27 Message to Camera, serial 7028 queued 09:41:58 Received message from Master: op=PointingHead serial=7035 09:41:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:41:58 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:41:58 Point started: ret=0 09:41:58 point_skyscan result=0 09:41:59 Check angles 09:41:59 SkyScan query 09:42:00 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 09:42:00 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 09:42:00 Check angles 09:42:00 SkyScan query 09:42:00 SkyScan query done: ret=0 az=127.215<-8481 ze=38.505<-9433 Statuses=0009 0008 09:42:00 Msec=750 True Az=127.215 Ze=38.505 Az status=0009 Ze status=0008 09:42:01 Check angles 09:42:01 SkyScan query 09:42:01 SkyScan query done: ret=0 az=144.705<-9647 ze=38.505<-9433 Statuses=0009 0008 09:42:01 Msec=1500 True Az=144.705 Ze=38.505 Az status=0009 Ze status=0008 09:42:01 Check angles 09:42:01 SkyScan query 09:42:02 SkyScan query done: ret=0 az=162.18<-10812 ze=38.505<-9433 Statuses=0009 0008 09:42:02 Msec=2250 True Az=162.18 Ze=38.505 Az status=0009 Ze status=0008 09:42:02 Check angles 09:42:02 SkyScan query 09:42:03 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 09:42:03 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 09:42:03 Check angles 09:42:03 SkyScan query 09:42:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:42:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:42:03 Message to Master queued w/err=0: serial=7035 error=0 09:42:08 Received message from Master: op=Filter serial=7036 09:42:08 Color wheel filter change from 0 to 0 09:42:08 FLIGetFilterPos err=0 currentPosition=0 09:42:08 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:08 Filter is already there-color wheel unchanged 09:42:09 Received message from Master: op=Shutter serial=7037 09:42:09 Shutter LASER close 09:42:09 Received message from Camera: op=State serial=7039 09:42:09 GetSingleValue result=40 Value=cccccccc 09:42:09 SkyScan query 09:42:09 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:42:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:09 Parameters OK 09:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:09 Set A/D data flow result=40 09:42:09 Set A/D channel type result=40 09:42:09 Set A/D encoding result=40 09:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:09 Set channel filter=0.000000e+000 result=40 09:42:09 Config A/D Result=40 09:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:09 Get A/D filter: -9.255963e+061 result=40 09:42:09 Get A/D value=-858993460 result=40 09:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:09 Parameters OK 09:42:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:09 Set A/D data flow result=40 09:42:09 Set A/D channel type result=40 09:42:09 Set A/D encoding result=40 09:42:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:09 Set channel filter=0.000000e+000 result=40 09:42:09 Config A/D Result=40 09:42:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:09 Get A/D filter: -9.255963e+061 result=40 09:42:09 Get A/D value=-858993460 result=40 09:42:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:09 Aux= 09:42:09 Message to Camera, serial 7039 queued 09:42:40 Received message from Master: op=PointingHead serial=7046 09:42:40 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:42:40 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:42:40 Point started: ret=0 09:42:40 point_skyscan result=0 09:42:41 Check angles 09:42:41 SkyScan query 09:42:42 SkyScan query done: ret=0 az=153.24<-10216 ze=8.94<-11404 Statuses=0009 0009 09:42:42 Msec=0 True Az=153.24 Ze=8.94 Az status=0009 Ze status=0009 09:42:42 Check angles 09:42:42 SkyScan query 09:42:42 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.45<-12830 Statuses=0009 0009 09:42:42 Msec=750 True Az=135.45 Ze=-12.45 Az status=0009 Ze status=0009 09:42:43 Check angles 09:42:43 SkyScan query 09:42:43 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.375<-14225 Statuses=0009 0009 09:42:43 Msec=1500 True Az=117.81 Ze=-33.375 Az status=0009 Ze status=0009 09:42:43 Check angles 09:42:43 SkyScan query 09:42:44 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 09:42:44 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 09:42:44 Check angles 09:42:44 SkyScan query 09:42:45 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:42:45 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:42:45 Check angles 09:42:45 SkyScan query 09:42:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 09:42:45 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 09:42:45 Message to Master queued w/err=0: serial=7046 error=0 09:42:50 Received message from Master: op=Filter serial=7047 09:42:50 Color wheel filter change from 0 to 0 09:42:50 FLIGetFilterPos err=0 currentPosition=0 09:42:50 FLIGetStepsRemaining err=0 RemainingSteps=0 09:42:50 Filter is already there-color wheel unchanged 09:42:51 Received message from Master: op=Shutter serial=7048 09:42:51 Shutter LASER close 09:42:51 Received message from Camera: op=State serial=7050 09:42:51 GetSingleValue result=40 Value=cccccccc 09:42:51 SkyScan query 09:42:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:42:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:51 Parameters OK 09:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:51 Set A/D data flow result=40 09:42:51 Set A/D channel type result=40 09:42:51 Set A/D encoding result=40 09:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:51 Set channel filter=0.000000e+000 result=40 09:42:51 Config A/D Result=40 09:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:51 Get A/D filter: -9.255963e+061 result=40 09:42:51 Get A/D value=-858993460 result=40 09:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:42:51 Parameters OK 09:42:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:42:51 Set A/D data flow result=40 09:42:51 Set A/D channel type result=40 09:42:51 Set A/D encoding result=40 09:42:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:42:51 Set channel filter=0.000000e+000 result=40 09:42:51 Config A/D Result=40 09:42:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:42:51 Get A/D filter: -9.255963e+061 result=40 09:42:51 Get A/D value=-858993460 result=40 09:42:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:42:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:42:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:42:51 Aux= 09:42:51 Message to Camera, serial 7050 queued 09:43:22 Received message from Master: op=PointingHead serial=7057 09:43:22 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:43:22 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:43:22 Point started: ret=0 09:43:22 point_skyscan result=0 09:43:23 Check angles 09:43:23 SkyScan query 09:43:24 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.39<-17426 Statuses=0009 0009 09:43:24 Msec=0 True Az=109.035 Ze=-81.39 Az status=0009 Ze status=0009 09:43:24 Check angles 09:43:24 SkyScan query 09:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 09:43:25 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 09:43:25 Check angles 09:43:25 SkyScan query 09:43:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 09:43:25 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 09:43:25 Check angles 09:43:25 SkyScan query 09:43:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 09:43:26 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 09:43:26 Check angles 09:43:26 SkyScan query 09:43:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 09:43:27 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 09:43:27 Check angles 09:43:27 SkyScan query 09:43:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:43:28 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:43:28 Message to Master queued w/err=0: serial=7057 error=0 09:43:33 Received message from Master: op=Filter serial=7058 09:43:33 Color wheel filter change from 0 to 0 09:43:33 FLIGetFilterPos err=0 currentPosition=0 09:43:33 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:33 Filter is already there-color wheel unchanged 09:43:33 Received message from Master: op=Shutter serial=7059 09:43:33 Shutter LASER open 09:43:33 Received message from Camera: op=State serial=7061 09:43:33 GetSingleValue result=40 Value=cccccccc 09:43:33 SkyScan query 09:43:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:43:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:33 Parameters OK 09:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:33 Set A/D data flow result=40 09:43:33 Set A/D channel type result=40 09:43:33 Set A/D encoding result=40 09:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:33 Set channel filter=0.000000e+000 result=40 09:43:33 Config A/D Result=40 09:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:33 Get A/D filter: -9.255963e+061 result=40 09:43:33 Get A/D value=-858993460 result=40 09:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:33 Parameters OK 09:43:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:33 Set A/D data flow result=40 09:43:33 Set A/D channel type result=40 09:43:33 Set A/D encoding result=40 09:43:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:33 Set channel filter=0.000000e+000 result=40 09:43:33 Config A/D Result=40 09:43:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:33 Get A/D filter: -9.255963e+061 result=40 09:43:33 Get A/D value=-858993460 result=40 09:43:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:33 Aux= 09:43:33 Message to Camera, serial 7061 queued 09:43:36 Received message from Master: op=Shutter serial=7065 09:43:36 Shutter LASER close 09:43:36 Received message from Master: op=PointingHead serial=7069 09:43:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:43:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:43:37 Point started: ret=0 09:43:37 point_skyscan result=0 09:43:37 Check angles 09:43:37 SkyScan query 09:43:38 SkyScan query done: ret=0 az=89.685<-5979 ze=156.84<-1544 Statuses=0009 0009 09:43:38 Msec=0 True Az=89.685 Ze=156.84 Az status=0009 Ze status=0009 09:43:38 Check angles 09:43:38 SkyScan query 09:43:39 SkyScan query done: ret=0 az=72.21<-4814 ze=135.87<-2942 Statuses=0009 0009 09:43:39 Msec=750 True Az=72.21 Ze=135.87 Az status=0009 Ze status=0009 09:43:39 Check angles 09:43:39 SkyScan query 09:43:40 SkyScan query done: ret=0 az=54.81<-3654 ze=114.93<-4338 Statuses=0009 0009 09:43:40 Msec=1500 True Az=54.81 Ze=114.93 Az status=0009 Ze status=0009 09:43:40 Check angles 09:43:40 SkyScan query 09:43:40 SkyScan query done: ret=0 az=40.845<-2723 ze=93.96<-5736 Statuses=0009 0009 09:43:40 Msec=2250 True Az=40.845 Ze=93.96 Az status=0009 Ze status=0009 09:43:40 Check angles 09:43:40 SkyScan query 09:43:41 SkyScan query done: ret=0 az=41.01<-2734 ze=73.005<-7133 Statuses=0008 0009 09:43:41 Msec=3000 True Az=41.01 Ze=73.005 Az status=0008 Ze status=0009 09:43:41 Check angles 09:43:41 SkyScan query 09:43:42 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 09:43:42 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 09:43:42 Check angles 09:43:42 SkyScan query 09:43:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:43:43 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:43:43 Message to Master queued w/err=0: serial=7069 error=0 09:43:48 Received message from Master: op=Filter serial=7070 09:43:48 Color wheel filter change from 0 to 0 09:43:48 FLIGetFilterPos err=0 currentPosition=0 09:43:48 FLIGetStepsRemaining err=0 RemainingSteps=0 09:43:48 Filter is already there-color wheel unchanged 09:43:48 Received message from Master: op=Shutter serial=7071 09:43:48 Shutter LASER close 09:43:48 Received message from Camera: op=State serial=7073 09:43:48 GetSingleValue result=40 Value=cccccccc 09:43:48 SkyScan query 09:43:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:48 Parameters OK 09:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:48 Set A/D data flow result=40 09:43:48 Set A/D channel type result=40 09:43:48 Set A/D encoding result=40 09:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:48 Set channel filter=0.000000e+000 result=40 09:43:48 Config A/D Result=40 09:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:48 Get A/D filter: -9.255963e+061 result=40 09:43:48 Get A/D value=-858993460 result=40 09:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:43:48 Parameters OK 09:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:43:48 Set A/D data flow result=40 09:43:48 Set A/D channel type result=40 09:43:48 Set A/D encoding result=40 09:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:43:48 Set channel filter=0.000000e+000 result=40 09:43:48 Config A/D Result=40 09:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:43:48 Get A/D filter: -9.255963e+061 result=40 09:43:48 Get A/D value=-858993460 result=40 09:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:43:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:43:48 Aux= 09:43:48 Message to Camera, serial 7073 queued 09:44:19 Received message from Master: op=PointingHead serial=7080 09:44:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:44:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:44:20 Point started: ret=0 09:44:20 point_skyscan result=0 09:44:20 Check angles 09:44:20 SkyScan query 09:44:21 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 09:44:21 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 09:44:21 Check angles 09:44:21 SkyScan query 09:44:22 SkyScan query done: ret=0 az=82.095<-5473 ze=66.495<-7567 Statuses=0009 0008 09:44:22 Msec=750 True Az=82.095 Ze=66.495 Az status=0009 Ze status=0008 09:44:22 Check angles 09:44:22 SkyScan query 09:44:23 SkyScan query done: ret=0 az=99.57<-6638 ze=66.495<-7567 Statuses=0009 0008 09:44:23 Msec=1500 True Az=99.57 Ze=66.495 Az status=0009 Ze status=0008 09:44:23 Check angles 09:44:23 SkyScan query 09:44:23 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 09:44:23 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 09:44:23 Check angles 09:44:23 SkyScan query 09:44:24 SkyScan query done: ret=0 az=134.37<-8958 ze=66.495<-7567 Statuses=0009 0008 09:44:24 Msec=3000 True Az=134.37 Ze=66.495 Az status=0009 Ze status=0008 09:44:24 Check angles 09:44:24 SkyScan query 09:44:25 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 09:44:25 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 09:44:25 Check angles 09:44:25 SkyScan query 09:44:26 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:44:26 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:44:26 Message to Master queued w/err=0: serial=7080 error=0 09:44:31 Received message from Master: op=Filter serial=7081 09:44:31 Color wheel filter change from 0 to 0 09:44:31 FLIGetFilterPos err=0 currentPosition=0 09:44:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:44:31 Filter is already there-color wheel unchanged 09:44:31 Received message from Master: op=Shutter serial=7082 09:44:31 Shutter LASER close 09:44:31 Received message from Camera: op=State serial=7084 09:44:31 GetSingleValue result=40 Value=cccccccc 09:44:31 SkyScan query 09:44:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:44:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:31 Parameters OK 09:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:31 Set A/D data flow result=40 09:44:31 Set A/D channel type result=40 09:44:31 Set A/D encoding result=40 09:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:31 Set channel filter=0.000000e+000 result=40 09:44:31 Config A/D Result=40 09:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:31 Get A/D filter: -9.255963e+061 result=40 09:44:31 Get A/D value=-858993460 result=40 09:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:44:31 Parameters OK 09:44:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:44:31 Set A/D data flow result=40 09:44:31 Set A/D channel type result=40 09:44:31 Set A/D encoding result=40 09:44:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:44:31 Set channel filter=0.000000e+000 result=40 09:44:31 Config A/D Result=40 09:44:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:44:31 Get A/D filter: -9.255963e+061 result=40 09:44:31 Get A/D value=-858993460 result=40 09:44:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:44:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:44:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:44:31 Aux= 09:44:31 Message to Camera, serial 7084 queued 09:45:02 Received message from Master: op=PointingHead serial=7091 09:45:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:45:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:45:03 Point started: ret=0 09:45:03 point_skyscan result=0 09:45:03 Check angles 09:45:03 SkyScan query 09:45:04 SkyScan query done: ret=0 az=135.105<-9007 ze=36.81<-9546 Statuses=0009 0009 09:45:04 Msec=0 True Az=135.105 Ze=36.81 Az status=0009 Ze status=0009 09:45:04 Check angles 09:45:04 SkyScan query 09:45:05 SkyScan query done: ret=0 az=117.6<-7840 ze=15.84<-10944 Statuses=0009 0009 09:45:05 Msec=750 True Az=117.6 Ze=15.84 Az status=0009 Ze status=0009 09:45:05 Check angles 09:45:05 SkyScan query 09:45:05 SkyScan query done: ret=0 az=100.215<-6681 ze=-5.175<-12345 Statuses=0009 0009 09:45:05 Msec=1500 True Az=100.215 Ze=-5.175 Az status=0009 Ze status=0009 09:45:06 Check angles 09:45:06 SkyScan query 09:45:06 SkyScan query done: ret=0 az=82.695<-5513 ze=-26.07<-13738 Statuses=0009 0009 09:45:06 Msec=2250 True Az=82.695 Ze=-26.07 Az status=0009 Ze status=0009 09:45:06 Check angles 09:45:06 SkyScan query 09:45:07 SkyScan query done: ret=0 az=64.845<-4323 ze=-38.565<-14571 Statuses=0009 0008 09:45:07 Msec=3000 True Az=64.845 Ze=-38.565 Az status=0009 Ze status=0008 09:45:07 Check angles 09:45:07 SkyScan query 09:45:08 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.535<-14569 Statuses=0009 0008 09:45:08 Msec=3750 True Az=47.445 Ze=-38.535 Az status=0009 Ze status=0008 09:45:08 Check angles 09:45:08 SkyScan query 09:45:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:45:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:45:08 Message to Master queued w/err=0: serial=7091 error=0 09:45:13 Received message from Master: op=Filter serial=7092 09:45:13 Color wheel filter change from 0 to 0 09:45:13 FLIGetFilterPos err=0 currentPosition=0 09:45:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:13 Filter is already there-color wheel unchanged 09:45:14 Received message from Master: op=Shutter serial=7093 09:45:14 Shutter LASER close 09:45:14 Received message from Camera: op=State serial=7095 09:45:14 GetSingleValue result=40 Value=cccccccc 09:45:14 SkyScan query 09:45:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:45:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:14 Parameters OK 09:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:14 Set A/D data flow result=40 09:45:14 Set A/D channel type result=40 09:45:14 Set A/D encoding result=40 09:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:14 Set channel filter=0.000000e+000 result=40 09:45:14 Config A/D Result=40 09:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:14 Get A/D filter: -9.255963e+061 result=40 09:45:14 Get A/D value=-858993460 result=40 09:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:14 Parameters OK 09:45:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:14 Set A/D data flow result=40 09:45:14 Set A/D channel type result=40 09:45:14 Set A/D encoding result=40 09:45:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:14 Set channel filter=0.000000e+000 result=40 09:45:14 Config A/D Result=40 09:45:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:14 Get A/D filter: -9.255963e+061 result=40 09:45:14 Get A/D value=-858993460 result=40 09:45:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:14 Aux= 09:45:14 Message to Camera, serial 7095 queued 09:45:45 Received message from Master: op=PointingHead serial=7102 09:45:45 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:45:45 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:45:45 Point started: ret=0 09:45:45 point_skyscan result=0 09:45:46 Check angles 09:45:46 SkyScan query 09:45:47 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.13<-16542 Statuses=0009 0009 09:45:47 Msec=0 True Az=63.825 Ze=-68.13 Az status=0009 Ze status=0009 09:45:47 Check angles 09:45:47 SkyScan query 09:45:47 SkyScan query done: ret=0 az=81.465<-5431 ze=-89.1<-17940 Statuses=0009 0009 09:45:47 Msec=750 True Az=81.465 Ze=-89.1 Az status=0009 Ze status=0009 09:45:48 Check angles 09:45:48 SkyScan query 09:45:48 SkyScan query done: ret=0 az=99<-6600 ze=-110.01<-19334 Statuses=0009 0009 09:45:48 Msec=1500 True Az=99 Ze=-110.01 Az status=0009 Ze status=0009 09:45:48 Check angles 09:45:48 SkyScan query 09:45:49 SkyScan query done: ret=0 az=116.43<-7762 ze=-130.98<-20732 Statuses=0009 0009 09:45:49 Msec=2250 True Az=116.43 Ze=-130.98 Az status=0009 Ze status=0009 09:45:49 Check angles 09:45:49 SkyScan query 09:45:50 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.525<-21435 Statuses=0009 0008 09:45:50 Msec=3000 True Az=131.055 Ze=-141.525 Az status=0009 Ze status=0008 09:45:50 Check angles 09:45:50 SkyScan query 09:45:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:45:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:45:50 Message to Master queued w/err=0: serial=7102 error=0 09:45:55 Received message from Master: op=Filter serial=7103 09:45:55 Color wheel filter change from 0 to 0 09:45:55 FLIGetFilterPos err=0 currentPosition=0 09:45:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:45:55 Filter is already there-color wheel unchanged 09:45:56 Received message from Master: op=Shutter serial=7104 09:45:56 Shutter LASER close 09:45:56 Received message from Camera: op=State serial=7106 09:45:56 GetSingleValue result=40 Value=cccccccc 09:45:56 SkyScan query 09:45:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:45:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:56 Parameters OK 09:45:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:56 Set A/D data flow result=40 09:45:56 Set A/D channel type result=40 09:45:56 Set A/D encoding result=40 09:45:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:56 Set channel filter=0.000000e+000 result=40 09:45:56 Config A/D Result=40 09:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:56 Get A/D filter: -9.255963e+061 result=40 09:45:56 Get A/D value=-858993460 result=40 09:45:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:45:56 Parameters OK 09:45:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:45:56 Set A/D data flow result=40 09:45:56 Set A/D channel type result=40 09:45:56 Set A/D encoding result=40 09:45:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:45:56 Set channel filter=0.000000e+000 result=40 09:45:56 Config A/D Result=40 09:45:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:45:56 Get A/D filter: -9.255963e+061 result=40 09:45:56 Get A/D value=-858993460 result=40 09:45:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:45:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:45:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:45:56 Aux= 09:45:56 Message to Camera, serial 7106 queued 09:46:27 Received message from Master: op=PointingHead serial=7113 09:46:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:46:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:46:27 Point started: ret=0 09:46:27 point_skyscan result=0 09:46:28 Check angles 09:46:28 SkyScan query 09:46:29 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.09<-23406 Statuses=0009 0009 09:46:29 Msec=0 True Az=113.025 Ze=-171.09 Az status=0009 Ze status=0009 09:46:29 Check angles 09:46:29 SkyScan query 09:46:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:46:30 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:46:30 Message to Master queued w/err=0: serial=7113 error=0 09:46:35 Received message from Master: op=Filter serial=7114 09:46:35 Color wheel filter change from 0 to 0 09:46:35 FLIGetFilterPos err=0 currentPosition=0 09:46:35 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:35 Filter is already there-color wheel unchanged 09:46:35 Received message from Master: op=Shutter serial=7115 09:46:35 Shutter LASER open 09:46:35 Received message from Camera: op=State serial=7117 09:46:35 GetSingleValue result=40 Value=cccccccc 09:46:35 SkyScan query 09:46:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:46:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:36 Parameters OK 09:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:36 Set A/D data flow result=40 09:46:36 Set A/D channel type result=40 09:46:36 Set A/D encoding result=40 09:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:36 Set channel filter=0.000000e+000 result=40 09:46:36 Config A/D Result=40 09:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:36 Get A/D filter: -9.255963e+061 result=40 09:46:36 Get A/D value=-858993460 result=40 09:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:36 Parameters OK 09:46:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:36 Set A/D data flow result=40 09:46:36 Set A/D channel type result=40 09:46:36 Set A/D encoding result=40 09:46:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:36 Set channel filter=0.000000e+000 result=40 09:46:36 Config A/D Result=40 09:46:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:36 Get A/D filter: -9.255963e+061 result=40 09:46:36 Get A/D value=-858993460 result=40 09:46:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:36 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:36 Aux= 09:46:36 Message to Camera, serial 7117 queued 09:46:38 Received message from Master: op=Shutter serial=7121 09:46:38 Shutter LASER close 09:46:39 Received message from Master: op=PointingHead serial=7125 09:46:39 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:46:39 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:46:39 Point started: ret=0 09:46:39 point_skyscan result=0 09:46:40 Check angles 09:46:40 SkyScan query 09:46:40 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.355<-21557 Statuses=0009 0009 09:46:40 Msec=0 True Az=135.84 Ze=-143.355 Az status=0009 Ze status=0009 09:46:40 Check angles 09:46:40 SkyScan query 09:46:41 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.95<-20130 Statuses=0009 0009 09:46:41 Msec=750 True Az=153.705 Ze=-121.95 Az status=0009 Ze status=0009 09:46:41 Check angles 09:46:41 SkyScan query 09:46:42 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.04<-18736 Statuses=0009 0009 09:46:42 Msec=1500 True Az=171.18 Ze=-101.04 Az status=0009 Ze status=0009 09:46:42 Check angles 09:46:42 SkyScan query 09:46:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 09:46:42 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 09:46:43 Check angles 09:46:43 SkyScan query 09:46:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.65<-15910 Statuses=0008 0009 09:46:43 Msec=3000 True Az=175.995 Ze=-58.65 Az status=0008 Ze status=0009 09:46:43 Check angles 09:46:43 SkyScan query 09:46:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:46:44 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:46:44 Message to Master queued w/err=0: serial=7125 error=0 09:46:49 Received message from Master: op=Filter serial=7126 09:46:49 Color wheel filter change from 0 to 0 09:46:49 FLIGetFilterPos err=0 currentPosition=0 09:46:49 FLIGetStepsRemaining err=0 RemainingSteps=0 09:46:49 Filter is already there-color wheel unchanged 09:46:49 Received message from Master: op=Shutter serial=7127 09:46:49 Shutter LASER close 09:46:49 Received message from Camera: op=State serial=7129 09:46:49 GetSingleValue result=40 Value=cccccccc 09:46:49 SkyScan query 09:46:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:46:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:50 Parameters OK 09:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:50 Set A/D data flow result=40 09:46:50 Set A/D channel type result=40 09:46:50 Set A/D encoding result=40 09:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:50 Set channel filter=0.000000e+000 result=40 09:46:50 Config A/D Result=40 09:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:50 Get A/D filter: -9.255963e+061 result=40 09:46:50 Get A/D value=-858993460 result=40 09:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:46:50 Parameters OK 09:46:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:46:50 Set A/D data flow result=40 09:46:50 Set A/D channel type result=40 09:46:50 Set A/D encoding result=40 09:46:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:46:50 Set channel filter=0.000000e+000 result=40 09:46:50 Config A/D Result=40 09:46:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:46:50 Get A/D filter: -9.255963e+061 result=40 09:46:50 Get A/D value=-858993460 result=40 09:46:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:46:50 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:46:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:46:50 Aux= 09:46:50 Message to Camera, serial 7129 queued 09:47:21 Received message from Master: op=PointingHead serial=7136 09:47:21 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:47:21 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:47:21 Point started: ret=0 09:47:21 point_skyscan result=0 09:47:22 Check angles 09:47:22 SkyScan query 09:47:23 SkyScan query done: ret=0 az=153.24<-10216 ze=-22.035<-13469 Statuses=0009 0009 09:47:23 Msec=0 True Az=153.24 Ze=-22.035 Az status=0009 Ze status=0009 09:47:23 Check angles 09:47:23 SkyScan query 09:47:23 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.08<-12072 Statuses=0009 0009 09:47:23 Msec=750 True Az=135.81 Ze=-1.08 Az status=0009 Ze status=0009 09:47:23 Check angles 09:47:23 SkyScan query 09:47:24 SkyScan query done: ret=0 az=118.245<-7883 ze=19.89<-10674 Statuses=0009 0009 09:47:24 Msec=1500 True Az=118.245 Ze=19.89 Az status=0009 Ze status=0009 09:47:24 Check angles 09:47:24 SkyScan query 09:47:25 SkyScan query done: ret=0 az=100.86<-6724 ze=40.815<-9279 Statuses=0009 0009 09:47:25 Msec=2250 True Az=100.86 Ze=40.815 Az status=0009 Ze status=0009 09:47:25 Check angles 09:47:25 SkyScan query 09:47:26 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:47:26 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:47:26 Check angles 09:47:26 SkyScan query 09:47:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:47:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:47:26 Message to Master queued w/err=0: serial=7136 error=0 09:47:31 Received message from Master: op=Filter serial=7137 09:47:31 Color wheel filter change from 0 to 0 09:47:31 FLIGetFilterPos err=0 currentPosition=0 09:47:31 FLIGetStepsRemaining err=0 RemainingSteps=0 09:47:31 Filter is already there-color wheel unchanged 09:47:31 Received message from Master: op=Shutter serial=7138 09:47:31 Shutter LASER close 09:47:31 Received message from Camera: op=State serial=7140 09:47:31 GetSingleValue result=40 Value=cccccccc 09:47:31 SkyScan query 09:47:32 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:47:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:32 Parameters OK 09:47:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:32 Set A/D data flow result=40 09:47:32 Set A/D channel type result=40 09:47:32 Set A/D encoding result=40 09:47:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:32 Set channel filter=0.000000e+000 result=40 09:47:32 Config A/D Result=40 09:47:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:32 Get A/D filter: -9.255963e+061 result=40 09:47:32 Get A/D value=-858993460 result=40 09:47:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:47:32 Parameters OK 09:47:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:47:32 Set A/D data flow result=40 09:47:32 Set A/D channel type result=40 09:47:32 Set A/D encoding result=40 09:47:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:47:32 Set channel filter=0.000000e+000 result=40 09:47:32 Config A/D Result=40 09:47:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:47:32 Get A/D filter: -9.255963e+061 result=40 09:47:32 Get A/D value=-858993460 result=40 09:47:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:47:32 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:47:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:47:32 Aux= 09:47:32 Message to Camera, serial 7140 queued 09:48:03 Received message from Master: op=PointingHead serial=7147 09:48:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:48:03 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:48:03 Point started: ret=0 09:48:03 point_skyscan result=0 09:48:04 Check angles 09:48:04 SkyScan query 09:48:05 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 09:48:05 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 09:48:05 Check angles 09:48:05 SkyScan query 09:48:05 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 09:48:05 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 09:48:05 Check angles 09:48:05 SkyScan query 09:48:06 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 09:48:06 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 09:48:06 Check angles 09:48:06 SkyScan query 09:48:07 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 09:48:07 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 09:48:07 Check angles 09:48:07 SkyScan query 09:48:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:48:08 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:48:08 Check angles 09:48:08 SkyScan query 09:48:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:48:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:48:08 Message to Master queued w/err=0: serial=7147 error=0 09:48:13 Received message from Master: op=Filter serial=7148 09:48:13 Color wheel filter change from 0 to 0 09:48:13 FLIGetFilterPos err=0 currentPosition=0 09:48:13 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:13 Filter is already there-color wheel unchanged 09:48:14 Received message from Master: op=Shutter serial=7149 09:48:14 Shutter LASER close 09:48:14 Received message from Camera: op=State serial=7151 09:48:14 GetSingleValue result=40 Value=cccccccc 09:48:14 SkyScan query 09:48:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:48:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:14 Parameters OK 09:48:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:14 Set A/D data flow result=40 09:48:14 Set A/D channel type result=40 09:48:14 Set A/D encoding result=40 09:48:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:14 Set channel filter=0.000000e+000 result=40 09:48:14 Config A/D Result=40 09:48:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:14 Get A/D filter: -9.255963e+061 result=40 09:48:14 Get A/D value=-858993460 result=40 09:48:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:14 Parameters OK 09:48:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:14 Set A/D data flow result=40 09:48:14 Set A/D channel type result=40 09:48:14 Set A/D encoding result=40 09:48:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:14 Set channel filter=0.000000e+000 result=40 09:48:14 Config A/D Result=40 09:48:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:14 Get A/D filter: -9.255963e+061 result=40 09:48:14 Get A/D value=-858993460 result=40 09:48:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:14 Aux= 09:48:14 Message to Camera, serial 7151 queued 09:48:45 Received message from Master: op=PointingHead serial=7158 09:48:45 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:48:45 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:48:45 Point started: ret=0 09:48:45 point_skyscan result=0 09:48:46 Check angles 09:48:46 SkyScan query 09:48:47 SkyScan query done: ret=0 az=153.195<-10213 ze=8.88<-11408 Statuses=0009 0009 09:48:47 Msec=0 True Az=153.195 Ze=8.88 Az status=0009 Ze status=0009 09:48:47 Check angles 09:48:47 SkyScan query 09:48:47 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.48<-12832 Statuses=0009 0009 09:48:47 Msec=750 True Az=135.405 Ze=-12.48 Az status=0009 Ze status=0009 09:48:48 Check angles 09:48:48 SkyScan query 09:48:48 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.435<-14229 Statuses=0009 0009 09:48:48 Msec=1500 True Az=117.87 Ze=-33.435 Az status=0009 Ze status=0009 09:48:48 Check angles 09:48:48 SkyScan query 09:48:49 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.54<-15436 Statuses=0009 0009 09:48:49 Msec=2250 True Az=100.47 Ze=-51.54 Az status=0009 Ze status=0009 09:48:49 Check angles 09:48:49 SkyScan query 09:48:50 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 09:48:50 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 09:48:50 Check angles 09:48:50 SkyScan query 09:48:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:48:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:48:50 Message to Master queued w/err=0: serial=7158 error=0 09:48:55 Received message from Master: op=Filter serial=7159 09:48:55 Color wheel filter change from 0 to 0 09:48:55 FLIGetFilterPos err=0 currentPosition=0 09:48:55 FLIGetStepsRemaining err=0 RemainingSteps=0 09:48:55 Filter is already there-color wheel unchanged 09:48:56 Received message from Master: op=Shutter serial=7160 09:48:56 Shutter LASER close 09:48:56 Received message from Camera: op=State serial=7162 09:48:56 GetSingleValue result=40 Value=cccccccc 09:48:56 SkyScan query 09:48:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:48:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:56 Parameters OK 09:48:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:56 Set A/D data flow result=40 09:48:56 Set A/D channel type result=40 09:48:56 Set A/D encoding result=40 09:48:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:56 Set channel filter=0.000000e+000 result=40 09:48:56 Config A/D Result=40 09:48:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:56 Get A/D filter: -9.255963e+061 result=40 09:48:56 Get A/D value=-858993460 result=40 09:48:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:48:56 Parameters OK 09:48:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:48:56 Set A/D data flow result=40 09:48:56 Set A/D channel type result=40 09:48:56 Set A/D encoding result=40 09:48:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:48:56 Set channel filter=0.000000e+000 result=40 09:48:56 Config A/D Result=40 09:48:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:48:56 Get A/D filter: -9.255963e+061 result=40 09:48:56 Get A/D value=-858993460 result=40 09:48:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:48:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:48:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:48:56 Aux= 09:48:56 Message to Camera, serial 7162 queued 09:49:27 Received message from Master: op=PointingHead serial=7169 09:49:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:49:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:49:27 Point started: ret=0 09:49:27 point_skyscan result=0 09:49:28 Check angles 09:49:28 SkyScan query 09:49:29 SkyScan query done: ret=0 az=109.41<-7294 ze=-81.81<-17454 Statuses=0009 0009 09:49:29 Msec=0 True Az=109.41 Ze=-81.81 Az status=0009 Ze status=0009 09:49:29 Check angles 09:49:29 SkyScan query 09:49:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.185<-18879 Statuses=0008 0009 09:49:30 Msec=750 True Az=112.995 Ze=-103.185 Az status=0008 Ze status=0009 09:49:30 Check angles 09:49:30 SkyScan query 09:49:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.14<-20276 Statuses=0008 0009 [UTC 2018-12-4 09:49:30] 09:49:30 Msec=1500 True Az=113.01 Ze=-124.14 Az status=0008 Ze status=0009 09:49:30 Check angles 09:49:30 SkyScan query 09:49:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 09:49:31 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 09:49:31 Check angles 09:49:31 SkyScan query 09:49:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.485<-23099 Statuses=0008 0009 09:49:32 Msec=3000 True Az=112.995 Ze=-166.485 Az status=0008 Ze status=0009 09:49:32 Check angles 09:49:32 SkyScan query 09:49:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:49:33 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:49:33 Message to Master queued w/err=0: serial=7169 error=0 09:49:38 Received message from Master: op=Filter serial=7170 09:49:38 Color wheel filter change from 0 to 0 09:49:38 FLIGetFilterPos err=0 currentPosition=0 09:49:38 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:38 Filter is already there-color wheel unchanged 09:49:38 Received message from Master: op=Shutter serial=7171 09:49:38 Shutter LASER open 09:49:38 Received message from Camera: op=State serial=7173 09:49:38 GetSingleValue result=40 Value=cccccccc 09:49:38 SkyScan query 09:49:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:49:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:38 Parameters OK 09:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:38 Set A/D data flow result=40 09:49:38 Set A/D channel type result=40 09:49:38 Set A/D encoding result=40 09:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:38 Set channel filter=0.000000e+000 result=40 09:49:38 Config A/D Result=40 09:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:38 Get A/D filter: -9.255963e+061 result=40 09:49:38 Get A/D value=-858993460 result=40 09:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:38 Parameters OK 09:49:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:38 Set A/D data flow result=40 09:49:38 Set A/D channel type result=40 09:49:38 Set A/D encoding result=40 09:49:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:38 Set channel filter=0.000000e+000 result=40 09:49:38 Config A/D Result=40 09:49:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:38 Get A/D filter: -9.255963e+061 result=40 09:49:38 Get A/D value=-858993460 result=40 09:49:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:38 Aux= 09:49:38 Message to Camera, serial 7173 queued 09:49:41 Received message from Master: op=Shutter serial=7177 09:49:41 Shutter LASER close 09:49:41 Received message from Master: op=PointingHead serial=7181 09:49:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:49:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:49:42 Point started: ret=0 09:49:42 point_skyscan result=0 09:49:42 Check angles 09:49:42 SkyScan query 09:49:43 SkyScan query done: ret=0 az=89.67<-5978 ze=156.9<-1540 Statuses=0009 0009 09:49:43 Msec=0 True Az=89.67 Ze=156.9 Az status=0009 Ze status=0009 09:49:43 Check angles 09:49:43 SkyScan query 09:49:44 SkyScan query done: ret=0 az=72.255<-4817 ze=135.93<-2938 Statuses=0009 0009 09:49:44 Msec=750 True Az=72.255 Ze=135.93 Az status=0009 Ze status=0009 09:49:44 Check angles 09:49:44 SkyScan query 09:49:45 SkyScan query done: ret=0 az=54.78<-3652 ze=114.99<-4334 Statuses=0009 0009 09:49:45 Msec=1500 True Az=54.78 Ze=114.99 Az status=0009 Ze status=0009 09:49:45 Check angles 09:49:45 SkyScan query 09:49:45 SkyScan query done: ret=0 az=40.86<-2724 ze=94.005<-5733 Statuses=0009 0009 09:49:45 Msec=2250 True Az=40.86 Ze=94.005 Az status=0009 Ze status=0009 09:49:45 Check angles 09:49:45 SkyScan query 09:49:46 SkyScan query done: ret=0 az=41.01<-2734 ze=73.065<-7129 Statuses=0008 0009 09:49:46 Msec=3000 True Az=41.01 Ze=73.065 Az status=0008 Ze status=0009 09:49:46 Check angles 09:49:46 SkyScan query 09:49:47 SkyScan query done: ret=0 az=40.995<-2733 ze=52.605<-8493 Statuses=0008 0009 09:49:47 Msec=3750 True Az=40.995 Ze=52.605 Az status=0008 Ze status=0009 09:49:47 Check angles 09:49:47 SkyScan query 09:49:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:49:48 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:49:48 Message to Master queued w/err=0: serial=7181 error=0 09:49:53 Received message from Master: op=Filter serial=7182 09:49:53 Color wheel filter change from 0 to 0 09:49:53 FLIGetFilterPos err=0 currentPosition=0 09:49:53 FLIGetStepsRemaining err=0 RemainingSteps=0 09:49:53 Filter is already there-color wheel unchanged 09:49:53 Received message from Master: op=Shutter serial=7183 09:49:53 Shutter LASER close 09:49:53 Received message from Camera: op=State serial=7185 09:49:53 GetSingleValue result=40 Value=cccccccc 09:49:53 SkyScan query 09:49:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:49:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:53 Parameters OK 09:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:53 Set A/D data flow result=40 09:49:53 Set A/D channel type result=40 09:49:53 Set A/D encoding result=40 09:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:53 Set channel filter=0.000000e+000 result=40 09:49:53 Config A/D Result=40 09:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:53 Get A/D filter: -9.255963e+061 result=40 09:49:53 Get A/D value=-858993460 result=40 09:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:49:53 Parameters OK 09:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:49:53 Set A/D data flow result=40 09:49:53 Set A/D channel type result=40 09:49:53 Set A/D encoding result=40 09:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:49:53 Set channel filter=0.000000e+000 result=40 09:49:53 Config A/D Result=40 09:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:49:53 Get A/D filter: -9.255963e+061 result=40 09:49:53 Get A/D value=-858993460 result=40 09:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:49:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:49:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:49:53 Aux= 09:49:53 Message to Camera, serial 7185 queued 09:50:24 Received message from Master: op=PointingHead serial=7192 09:50:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:50:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:50:25 Point started: ret=0 09:50:25 point_skyscan result=0 09:50:25 Check angles 09:50:25 SkyScan query 09:50:26 SkyScan query done: ret=0 az=63.885<-4259 ze=66.555<-7563 Statuses=0009 0008 09:50:26 Msec=0 True Az=63.885 Ze=66.555 Az status=0009 Ze status=0008 09:50:26 Check angles 09:50:26 SkyScan query 09:50:27 SkyScan query done: ret=0 az=81.9<-5460 ze=66.495<-7567 Statuses=0009 0008 09:50:27 Msec=750 True Az=81.9 Ze=66.495 Az status=0009 Ze status=0008 09:50:27 Check angles 09:50:27 SkyScan query 09:50:28 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 09:50:28 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 09:50:28 Check angles 09:50:28 SkyScan query 09:50:28 SkyScan query done: ret=0 az=116.835<-7789 ze=66.495<-7567 Statuses=0009 0008 09:50:28 Msec=2250 True Az=116.835 Ze=66.495 Az status=0009 Ze status=0008 09:50:28 Check angles 09:50:28 SkyScan query 09:50:29 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 09:50:29 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 09:50:29 Check angles 09:50:29 SkyScan query 09:50:30 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 09:50:30 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 09:50:30 Check angles 09:50:30 SkyScan query 09:50:31 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 09:50:31 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 09:50:31 Message to Master queued w/err=0: serial=7192 error=0 09:50:36 Received message from Master: op=Filter serial=7193 09:50:36 Color wheel filter change from 0 to 0 09:50:36 FLIGetFilterPos err=0 currentPosition=0 09:50:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:50:36 Filter is already there-color wheel unchanged 09:50:36 Received message from Master: op=Shutter serial=7194 09:50:36 Shutter LASER close 09:50:36 Received message from Camera: op=State serial=7196 09:50:36 GetSingleValue result=40 Value=cccccccc 09:50:36 SkyScan query 09:50:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:50:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:36 Parameters OK 09:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:36 Set A/D data flow result=40 09:50:36 Set A/D channel type result=40 09:50:36 Set A/D encoding result=40 09:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:36 Set channel filter=0.000000e+000 result=40 09:50:36 Config A/D Result=40 09:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:36 Get A/D filter: -9.255963e+061 result=40 09:50:36 Get A/D value=-858993460 result=40 09:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:50:36 Parameters OK 09:50:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:50:36 Set A/D data flow result=40 09:50:36 Set A/D channel type result=40 09:50:36 Set A/D encoding result=40 09:50:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:50:36 Set channel filter=0.000000e+000 result=40 09:50:36 Config A/D Result=40 09:50:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:50:36 Get A/D filter: -9.255963e+061 result=40 09:50:36 Get A/D value=-858993460 result=40 09:50:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:50:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:50:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:50:36 Aux= 09:50:36 Message to Camera, serial 7196 queued 09:51:07 Received message from Master: op=PointingHead serial=7203 09:51:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:51:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:51:08 Point started: ret=0 09:51:08 point_skyscan result=0 09:51:08 Check angles 09:51:08 SkyScan query 09:51:09 SkyScan query done: ret=0 az=134.865<-8991 ze=36.675<-9555 Statuses=0009 0009 09:51:09 Msec=0 True Az=134.865 Ze=36.675 Az status=0009 Ze status=0009 09:51:09 Check angles 09:51:09 SkyScan query 09:51:10 SkyScan query done: ret=0 az=117.315<-7821 ze=15.72<-10952 Statuses=0009 0009 09:51:10 Msec=750 True Az=117.315 Ze=15.72 Az status=0009 Ze status=0009 09:51:10 Check angles 09:51:10 SkyScan query 09:51:10 SkyScan query done: ret=0 az=100.065<-6671 ze=-5.25<-12350 Statuses=0009 0009 09:51:10 Msec=1500 True Az=100.065 Ze=-5.25 Az status=0009 Ze status=0009 09:51:11 Check angles 09:51:11 SkyScan query 09:51:11 SkyScan query done: ret=0 az=82.56<-5504 ze=-26.205<-13747 Statuses=0009 0009 09:51:11 Msec=2250 True Az=82.56 Ze=-26.205 Az status=0009 Ze status=0009 09:51:11 Check angles 09:51:11 SkyScan query 09:51:12 SkyScan query done: ret=0 az=64.785<-4319 ze=-38.565<-14571 Statuses=0009 0008 09:51:12 Msec=3000 True Az=64.785 Ze=-38.565 Az status=0009 Ze status=0008 09:51:12 Check angles 09:51:12 SkyScan query 09:51:13 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 09:51:13 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 09:51:13 Check angles 09:51:13 SkyScan query 09:51:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:51:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 09:51:13 Message to Master queued w/err=0: serial=7203 error=0 09:51:18 Received message from Master: op=Filter serial=7204 09:51:18 Color wheel filter change from 0 to 0 09:51:18 FLIGetFilterPos err=0 currentPosition=0 09:51:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:51:18 Filter is already there-color wheel unchanged 09:51:19 Received message from Master: op=Shutter serial=7205 09:51:19 Shutter LASER close 09:51:19 Received message from Camera: op=State serial=7207 09:51:19 GetSingleValue result=40 Value=cccccccc 09:51:19 SkyScan query 09:51:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:51:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:19 Parameters OK 09:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:19 Set A/D data flow result=40 09:51:19 Set A/D channel type result=40 09:51:19 Set A/D encoding result=40 09:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:19 Set channel filter=0.000000e+000 result=40 09:51:19 Config A/D Result=40 09:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:19 Get A/D filter: -9.255963e+061 result=40 09:51:19 Get A/D value=-858993460 result=40 09:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:51:19 Parameters OK 09:51:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:51:19 Set A/D data flow result=40 09:51:19 Set A/D channel type result=40 09:51:19 Set A/D encoding result=40 09:51:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:51:19 Set channel filter=0.000000e+000 result=40 09:51:19 Config A/D Result=40 09:51:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:51:19 Get A/D filter: -9.255963e+061 result=40 09:51:19 Get A/D value=-858993460 result=40 09:51:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:51:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:51:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:51:19 Aux= 09:51:19 Message to Camera, serial 7207 queued 09:51:49 Received message from Master: op=Identify serial=7209 09:51:50 Received message from Master: op=PointingHead serial=7217 09:51:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:51:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:51:50 Point started: ret=0 09:51:50 point_skyscan result=0 09:51:51 Check angles 09:51:51 SkyScan query 09:51:52 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.625<-16575 Statuses=0009 0009 09:51:52 Msec=0 True Az=64.29 Ze=-68.625 Az status=0009 Ze status=0009 09:51:52 Check angles 09:51:52 SkyScan query 09:51:52 SkyScan query done: ret=0 az=81.93<-5462 ze=-89.595<-17973 Statuses=0009 0009 09:51:52 Msec=750 True Az=81.93 Ze=-89.595 Az status=0009 Ze status=0009 09:51:53 Check angles 09:51:53 SkyScan query 09:51:53 SkyScan query done: ret=0 az=99.3<-6620 ze=-110.535<-19369 Statuses=0009 0009 09:51:53 Msec=1500 True Az=99.3 Ze=-110.535 Az status=0009 Ze status=0009 09:51:53 Check angles 09:51:53 SkyScan query 09:51:54 SkyScan query done: ret=0 az=116.85<-7790 ze=-131.505<-20767 Statuses=0009 0009 09:51:54 Msec=2250 True Az=116.85 Ze=-131.505 Az status=0009 Ze status=0009 09:51:54 Check angles 09:51:54 SkyScan query 09:51:55 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.525<-21435 Statuses=0009 0008 09:51:55 Msec=3000 True Az=130.98 Ze=-141.525 Az status=0009 Ze status=0008 09:51:55 Check angles 09:51:55 SkyScan query 09:51:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 09:51:55 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 09:51:55 Message to Master queued w/err=0: serial=7217 error=0 09:52:00 Received message from Master: op=Filter serial=7218 09:52:00 Color wheel filter change from 0 to 0 09:52:00 FLIGetFilterPos err=0 currentPosition=0 09:52:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:00 Filter is already there-color wheel unchanged 09:52:01 Received message from Master: op=Shutter serial=7219 09:52:01 Shutter LASER close 09:52:01 Received message from Camera: op=State serial=7221 09:52:01 GetSingleValue result=40 Value=cccccccc 09:52:01 SkyScan query 09:52:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:52:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:01 Parameters OK 09:52:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:01 Set A/D data flow result=40 09:52:01 Set A/D channel type result=40 09:52:01 Set A/D encoding result=40 09:52:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:01 Set channel filter=0.000000e+000 result=40 09:52:01 Config A/D Result=40 09:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:01 Get A/D filter: -9.255963e+061 result=40 09:52:01 Get A/D value=-858993460 result=40 09:52:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:01 Parameters OK 09:52:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:01 Set A/D data flow result=40 09:52:01 Set A/D channel type result=40 09:52:01 Set A/D encoding result=40 09:52:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:01 Set channel filter=0.000000e+000 result=40 09:52:01 Config A/D Result=40 09:52:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:01 Get A/D filter: -9.255963e+061 result=40 09:52:01 Get A/D value=-858993460 result=40 09:52:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:01 Aux= 09:52:01 Message to Camera, serial 7221 queued [UTC 2018-12-4 09:52:09] 09:52:32 Received message from Master: op=PointingHead serial=7228 09:52:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:52:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:52:32 Point started: ret=0 09:52:32 point_skyscan result=0 09:52:33 Check angles 09:52:33 SkyScan query 09:52:34 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.97<-23398 Statuses=0009 0009 09:52:34 Msec=0 True Az=113.025 Ze=-170.97 Az status=0009 Ze status=0009 09:52:34 Check angles 09:52:34 SkyScan query 09:52:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:52:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:52:34 Message to Master queued w/err=0: serial=7228 error=0 09:52:39 Received message from Master: op=Filter serial=7229 09:52:39 Color wheel filter change from 0 to 0 09:52:39 FLIGetFilterPos err=0 currentPosition=0 09:52:39 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:39 Filter is already there-color wheel unchanged 09:52:40 Received message from Master: op=Shutter serial=7230 09:52:40 Shutter LASER open 09:52:40 Received message from Camera: op=State serial=7232 09:52:40 GetSingleValue result=40 Value=cccccccc 09:52:40 SkyScan query 09:52:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:52:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:40 Parameters OK 09:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:40 Set A/D data flow result=40 09:52:40 Set A/D channel type result=40 09:52:40 Set A/D encoding result=40 09:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:40 Set channel filter=0.000000e+000 result=40 09:52:40 Config A/D Result=40 09:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:40 Get A/D filter: -9.255963e+061 result=40 09:52:40 Get A/D value=-858993460 result=40 09:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:40 Parameters OK 09:52:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:40 Set A/D data flow result=40 09:52:40 Set A/D channel type result=40 09:52:40 Set A/D encoding result=40 09:52:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:40 Set channel filter=0.000000e+000 result=40 09:52:40 Config A/D Result=40 09:52:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:40 Get A/D filter: -9.255963e+061 result=40 09:52:40 Get A/D value=-858993460 result=40 09:52:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:40 Aux= 09:52:40 Message to Camera, serial 7232 queued 09:52:43 Received message from Master: op=Shutter serial=7236 09:52:43 Shutter LASER close 09:52:44 Received message from Master: op=PointingHead serial=7240 09:52:44 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:52:44 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:52:44 Point started: ret=0 09:52:44 point_skyscan result=0 09:52:45 Check angles 09:52:45 SkyScan query 09:52:45 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.505<-21567 Statuses=0009 0009 09:52:45 Msec=0 True Az=135.735 Ze=-143.505 Az status=0009 Ze status=0009 09:52:45 Check angles 09:52:45 SkyScan query 09:52:46 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.565<-20171 Statuses=0009 0009 09:52:46 Msec=750 True Az=153.225 Ze=-122.565 Az status=0009 Ze status=0009 09:52:46 Check angles 09:52:46 SkyScan query 09:52:47 SkyScan query done: ret=0 az=170.565<-11371 ze=-101.58<-18772 Statuses=0009 0009 09:52:47 Msec=1500 True Az=170.565 Ze=-101.58 Az status=0009 Ze status=0009 09:52:47 Check angles 09:52:47 SkyScan query 09:52:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.625<-17375 Statuses=0008 0009 09:52:47 Msec=2250 True Az=176.025 Ze=-80.625 Az status=0008 Ze status=0009 09:52:48 Check angles 09:52:48 SkyScan query 09:52:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.67<-15978 Statuses=0008 0009 09:52:48 Msec=3000 True Az=175.995 Ze=-59.67 Az status=0008 Ze status=0009 09:52:48 Check angles 09:52:48 SkyScan query 09:52:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:52:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:52:49 Message to Master queued w/err=0: serial=7240 error=0 09:52:54 Received message from Master: op=Filter serial=7241 09:52:54 Color wheel filter change from 0 to 0 09:52:54 FLIGetFilterPos err=0 currentPosition=0 09:52:54 FLIGetStepsRemaining err=0 RemainingSteps=0 09:52:54 Filter is already there-color wheel unchanged 09:52:54 Received message from Master: op=Shutter serial=7242 09:52:54 Shutter LASER close 09:52:54 Received message from Camera: op=State serial=7244 09:52:54 GetSingleValue result=40 Value=cccccccc 09:52:54 SkyScan query 09:52:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:52:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:55 Parameters OK 09:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:55 Set A/D data flow result=40 09:52:55 Set A/D channel type result=40 09:52:55 Set A/D encoding result=40 09:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:55 Set channel filter=0.000000e+000 result=40 09:52:55 Config A/D Result=40 09:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:55 Get A/D filter: -9.255963e+061 result=40 09:52:55 Get A/D value=-858993460 result=40 09:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:52:55 Parameters OK 09:52:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:52:55 Set A/D data flow result=40 09:52:55 Set A/D channel type result=40 09:52:55 Set A/D encoding result=40 09:52:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:52:55 Set channel filter=0.000000e+000 result=40 09:52:55 Config A/D Result=40 09:52:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:52:55 Get A/D filter: -9.255963e+061 result=40 09:52:55 Get A/D value=-858993460 result=40 09:52:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:52:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:52:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:52:55 Aux= 09:52:55 Message to Camera, serial 7244 queued 09:53:26 Received message from Master: op=PointingHead serial=7251 09:53:26 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:53:26 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:53:26 Point started: ret=0 09:53:26 point_skyscan result=0 09:53:27 Check angles 09:53:27 SkyScan query 09:53:27 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.48<-13432 Statuses=0009 0009 09:53:27 Msec=0 True Az=152.76 Ze=-21.48 Az status=0009 Ze status=0009 09:53:28 Check angles 09:53:28 SkyScan query 09:53:28 SkyScan query done: ret=0 az=135.3<-9020 ze=-0.495<-12033 Statuses=0009 0009 09:53:28 Msec=750 True Az=135.3 Ze=-0.495 Az status=0009 Ze status=0009 09:53:28 Check angles 09:53:28 SkyScan query 09:53:29 SkyScan query done: ret=0 az=117.39<-7826 ze=20.865<-10609 Statuses=0009 0009 09:53:29 Msec=1500 True Az=117.39 Ze=20.865 Az status=0009 Ze status=0009 09:53:29 Check angles 09:53:29 SkyScan query 09:53:30 SkyScan query done: ret=0 az=100.005<-6667 ze=41.835<-9211 Statuses=0009 0009 09:53:30 Msec=2250 True Az=100.005 Ze=41.835 Az status=0009 Ze status=0009 09:53:30 Check angles 09:53:30 SkyScan query 09:53:30 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 09:53:30 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 09:53:31 Check angles 09:53:31 SkyScan query 09:53:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:53:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:53:31 Message to Master queued w/err=0: serial=7251 error=0 09:53:36 Received message from Master: op=Filter serial=7252 09:53:36 Color wheel filter change from 0 to 0 09:53:36 FLIGetFilterPos err=0 currentPosition=0 09:53:36 FLIGetStepsRemaining err=0 RemainingSteps=0 09:53:36 Filter is already there-color wheel unchanged 09:53:36 Received message from Master: op=Shutter serial=7253 09:53:36 Shutter LASER close 09:53:36 Received message from Camera: op=State serial=7255 09:53:36 GetSingleValue result=40 Value=cccccccc 09:53:36 SkyScan query 09:53:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:53:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:37 Parameters OK 09:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:37 Set A/D data flow result=40 09:53:37 Set A/D channel type result=40 09:53:37 Set A/D encoding result=40 09:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:37 Set channel filter=0.000000e+000 result=40 09:53:37 Config A/D Result=40 09:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:37 Get A/D filter: -9.255963e+061 result=40 09:53:37 Get A/D value=-858993460 result=40 09:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:53:37 Parameters OK 09:53:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:53:37 Set A/D data flow result=40 09:53:37 Set A/D channel type result=40 09:53:37 Set A/D encoding result=40 09:53:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:53:37 Set channel filter=0.000000e+000 result=40 09:53:37 Config A/D Result=40 09:53:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:53:37 Get A/D filter: -9.255963e+061 result=40 09:53:37 Get A/D value=-858993460 result=40 09:53:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:53:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:53:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:53:37 Aux= 09:53:37 Message to Camera, serial 7255 queued 09:54:08 Received message from Master: op=PointingHead serial=7262 09:54:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 09:54:08 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 09:54:08 Point started: ret=0 09:54:08 point_skyscan result=0 09:54:09 Check angles 09:54:09 SkyScan query 09:54:09 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 09:54:09 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 09:54:10 Check angles 09:54:10 SkyScan query 09:54:10 SkyScan query done: ret=0 az=126.66<-8444 ze=38.505<-9433 Statuses=0009 0008 09:54:10 Msec=750 True Az=126.66 Ze=38.505 Az status=0009 Ze status=0008 09:54:10 Check angles 09:54:10 SkyScan query 09:54:11 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 09:54:11 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 09:54:11 Check angles 09:54:11 SkyScan query 09:54:12 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 09:54:12 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 09:54:12 Check angles 09:54:12 SkyScan query 09:54:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 09:54:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 09:54:13 Check angles 09:54:13 SkyScan query 09:54:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 09:54:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 09:54:13 Message to Master queued w/err=0: serial=7262 error=0 09:54:18 Received message from Master: op=Filter serial=7263 09:54:18 Color wheel filter change from 0 to 0 09:54:18 FLIGetFilterPos err=0 currentPosition=0 09:54:18 FLIGetStepsRemaining err=0 RemainingSteps=0 09:54:18 Filter is already there-color wheel unchanged 09:54:18 Received message from Master: op=Shutter serial=7264 09:54:18 Shutter LASER close 09:54:18 Received message from Camera: op=State serial=7266 09:54:18 GetSingleValue result=40 Value=cccccccc 09:54:18 SkyScan query 09:54:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 09:54:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:19 Parameters OK 09:54:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:19 Set A/D data flow result=40 09:54:19 Set A/D channel type result=40 09:54:19 Set A/D encoding result=40 09:54:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:19 Set channel filter=0.000000e+000 result=40 09:54:19 Config A/D Result=40 09:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:19 Get A/D filter: -9.255963e+061 result=40 09:54:19 Get A/D value=-858993460 result=40 09:54:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:54:19 Parameters OK 09:54:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:54:19 Set A/D data flow result=40 09:54:19 Set A/D channel type result=40 09:54:19 Set A/D encoding result=40 09:54:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:54:19 Set channel filter=0.000000e+000 result=40 09:54:19 Config A/D Result=40 09:54:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:54:19 Get A/D filter: -9.255963e+061 result=40 09:54:19 Get A/D value=-858993460 result=40 09:54:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:54:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:54:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:54:19 Aux= 09:54:19 Message to Camera, serial 7266 queued 09:54:50 Received message from Master: op=PointingHead serial=7273 09:54:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 09:54:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 09:54:50 Point started: ret=0 09:54:50 point_skyscan result=0 09:54:51 Check angles 09:54:51 SkyScan query 09:54:52 SkyScan query done: ret=0 az=152.535<-10169 ze=8.16<-11456 Statuses=0009 0009 09:54:52 Msec=0 True Az=152.535 Ze=8.16 Az status=0009 Ze status=0009 09:54:52 Check angles 09:54:52 SkyScan query 09:54:52 SkyScan query done: ret=0 az=135.105<-9007 ze=-12.825<-12855 Statuses=0009 0009 09:54:52 Msec=750 True Az=135.105 Ze=-12.825 Az status=0009 Ze status=0009 09:54:52 Check angles 09:54:52 SkyScan query 09:54:53 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.735<-14249 Statuses=0009 0009 09:54:53 Msec=1500 True Az=117.525 Ze=-33.735 Az status=0009 Ze status=0009 09:54:53 Check angles 09:54:53 SkyScan query 09:54:54 SkyScan query done: ret=0 az=100.155<-6677 ze=-51.555<-15437 Statuses=0009 0009 09:54:54 Msec=2250 True Az=100.155 Ze=-51.555 Az status=0009 Ze status=0009 09:54:54 Check angles 09:54:54 SkyScan query 09:54:55 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 09:54:55 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 09:54:55 Check angles 09:54:55 SkyScan query 09:54:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:54:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 09:54:55 Message to Master queued w/err=0: serial=7273 error=0 09:55:00 Received message from Master: op=Filter serial=7274 09:55:00 Color wheel filter change from 0 to 0 09:55:00 FLIGetFilterPos err=0 currentPosition=0 09:55:00 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:00 Filter is already there-color wheel unchanged 09:55:00 Received message from Master: op=Shutter serial=7275 09:55:00 Shutter LASER close 09:55:01 Received message from Camera: op=State serial=7277 09:55:01 GetSingleValue result=40 Value=cccccccc 09:55:01 SkyScan query 09:55:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 09:55:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:01 Parameters OK 09:55:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:01 Set A/D data flow result=40 09:55:01 Set A/D channel type result=40 09:55:01 Set A/D encoding result=40 09:55:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:01 Set channel filter=0.000000e+000 result=40 09:55:01 Config A/D Result=40 09:55:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:01 Get A/D filter: -9.255963e+061 result=40 09:55:01 Get A/D value=-858993460 result=40 09:55:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:01 Parameters OK 09:55:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:01 Set A/D data flow result=40 09:55:01 Set A/D channel type result=40 09:55:01 Set A/D encoding result=40 09:55:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:01 Set channel filter=0.000000e+000 result=40 09:55:01 Config A/D Result=40 09:55:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:01 Get A/D filter: -9.255963e+061 result=40 09:55:01 Get A/D value=-858993460 result=40 09:55:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:01 Aux= 09:55:01 Message to Camera, serial 7277 queued 09:55:32 Received message from Master: op=PointingHead serial=7284 09:55:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:55:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:55:32 Point started: ret=0 09:55:32 point_skyscan result=0 09:55:33 Check angles 09:55:33 SkyScan query 09:55:34 SkyScan query done: ret=0 az=109.095<-7273 ze=-81.135<-17409 Statuses=0009 0009 09:55:34 Msec=0 True Az=109.095 Ze=-81.135 Az status=0009 Ze status=0009 09:55:34 Check angles 09:55:34 SkyScan query 09:55:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 09:55:34 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 09:55:35 Check angles 09:55:35 SkyScan query 09:55:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.465<-20231 Statuses=0008 0009 09:55:35 Msec=1500 True Az=112.995 Ze=-123.465 Az status=0008 Ze status=0009 09:55:35 Check angles 09:55:35 SkyScan query 09:55:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 09:55:36 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 09:55:36 Check angles 09:55:36 SkyScan query 09:55:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.39<-23026 Statuses=0008 0009 09:55:37 Msec=3000 True Az=112.995 Ze=-165.39 Az status=0008 Ze status=0009 09:55:37 Check angles 09:55:37 SkyScan query 09:55:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 09:55:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 09:55:37 Message to Master queued w/err=0: serial=7284 error=0 09:55:42 Received message from Master: op=Filter serial=7285 09:55:42 Color wheel filter change from 0 to 0 09:55:42 FLIGetFilterPos err=0 currentPosition=0 09:55:42 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:42 Filter is already there-color wheel unchanged 09:55:43 Received message from Master: op=Shutter serial=7286 09:55:43 Shutter LASER open 09:55:43 Received message from Camera: op=State serial=7288 09:55:43 GetSingleValue result=40 Value=cccccccc 09:55:43 SkyScan query 09:55:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:55:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:43 Parameters OK 09:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:43 Set A/D data flow result=40 09:55:43 Set A/D channel type result=40 09:55:43 Set A/D encoding result=40 09:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:43 Set channel filter=0.000000e+000 result=40 09:55:43 Config A/D Result=40 09:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:43 Get A/D filter: -9.255963e+061 result=40 09:55:43 Get A/D value=-858993460 result=40 09:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:43 Parameters OK 09:55:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:43 Set A/D data flow result=40 09:55:43 Set A/D channel type result=40 09:55:43 Set A/D encoding result=40 09:55:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:43 Set channel filter=0.000000e+000 result=40 09:55:43 Config A/D Result=40 09:55:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:43 Get A/D filter: -9.255963e+061 result=40 09:55:43 Get A/D value=-858993460 result=40 09:55:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:43 Aux= 09:55:43 Message to Camera, serial 7288 queued 09:55:46 Received message from Master: op=Shutter serial=7292 09:55:46 Shutter LASER close 09:55:46 Received message from Master: op=PointingHead serial=7296 09:55:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 09:55:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 09:55:47 Point started: ret=0 09:55:47 point_skyscan result=0 09:55:47 Check angles 09:55:47 SkyScan query 09:55:48 SkyScan query done: ret=0 az=89.49<-5966 ze=156.78<-1548 Statuses=0009 0009 09:55:48 Msec=0 True Az=89.49 Ze=156.78 Az status=0009 Ze status=0009 09:55:48 Check angles 09:55:48 SkyScan query 09:55:49 SkyScan query done: ret=0 az=72.03<-4802 ze=135.795<-2947 Statuses=0009 0009 09:55:49 Msec=750 True Az=72.03 Ze=135.795 Az status=0009 Ze status=0009 09:55:49 Check angles 09:55:49 SkyScan query 09:55:49 SkyScan query done: ret=0 az=54.705<-3647 ze=114.87<-4342 Statuses=0009 0009 09:55:49 Msec=1500 True Az=54.705 Ze=114.87 Az status=0009 Ze status=0009 09:55:50 Check angles 09:55:50 SkyScan query 09:55:50 SkyScan query done: ret=0 az=40.86<-2724 ze=93.885<-5741 Statuses=0009 0009 09:55:50 Msec=2250 True Az=40.86 Ze=93.885 Az status=0009 Ze status=0009 09:55:50 Check angles 09:55:50 SkyScan query 09:55:51 SkyScan query done: ret=0 az=41.01<-2734 ze=72.93<-7138 Statuses=0008 0009 09:55:51 Msec=3000 True Az=41.01 Ze=72.93 Az status=0008 Ze status=0009 09:55:51 Check angles 09:55:51 SkyScan query 09:55:52 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 09:55:52 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 09:55:52 Check angles 09:55:52 SkyScan query 09:55:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 09:55:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 09:55:52 Message to Master queued w/err=0: serial=7296 error=0 09:55:57 Received message from Master: op=Filter serial=7297 09:55:57 Color wheel filter change from 0 to 0 09:55:57 FLIGetFilterPos err=0 currentPosition=0 09:55:57 FLIGetStepsRemaining err=0 RemainingSteps=0 09:55:57 Filter is already there-color wheel unchanged 09:55:58 Received message from Master: op=Shutter serial=7298 09:55:58 Shutter LASER close 09:55:58 Received message from Camera: op=State serial=7300 09:55:58 GetSingleValue result=40 Value=cccccccc 09:55:58 SkyScan query 09:55:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 09:55:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:58 Parameters OK 09:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:58 Set A/D data flow result=40 09:55:58 Set A/D channel type result=40 09:55:58 Set A/D encoding result=40 09:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:58 Set channel filter=0.000000e+000 result=40 09:55:58 Config A/D Result=40 09:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:58 Get A/D filter: -9.255963e+061 result=40 09:55:58 Get A/D value=-858993460 result=40 09:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:55:58 Parameters OK 09:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:55:58 Set A/D data flow result=40 09:55:58 Set A/D channel type result=40 09:55:58 Set A/D encoding result=40 09:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:55:58 Set channel filter=0.000000e+000 result=40 09:55:58 Config A/D Result=40 09:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:55:58 Get A/D filter: -9.255963e+061 result=40 09:55:58 Get A/D value=-858993460 result=40 09:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:55:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:55:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:55:58 Aux= 09:55:58 Message to Camera, serial 7300 queued 09:56:29 Received message from Master: op=PointingHead serial=7307 09:56:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 09:56:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 09:56:30 Point started: ret=0 09:56:30 point_skyscan result=0 09:56:30 Check angles 09:56:30 SkyScan query 09:56:31 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 09:56:31 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 09:56:31 Check angles 09:56:31 SkyScan query 09:56:32 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 09:56:32 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 09:56:32 Check angles 09:56:32 SkyScan query 09:56:32 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 09:56:32 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 09:56:33 Check angles 09:56:33 SkyScan query 09:56:33 SkyScan query done: ret=0 az=116.82<-7788 ze=66.495<-7567 Statuses=0009 0008 09:56:33 Msec=2250 True Az=116.82 Ze=66.495 Az status=0009 Ze status=0008 09:56:33 Check angles 09:56:33 SkyScan query 09:56:34 SkyScan query done: ret=0 az=134.295<-8953 ze=66.495<-7567 Statuses=0009 0008 09:56:34 Msec=3000 True Az=134.295 Ze=66.495 Az status=0009 Ze status=0008 09:56:34 Check angles 09:56:34 SkyScan query 09:56:35 SkyScan query done: ret=0 az=151.59<-10106 ze=66.495<-7567 Statuses=0009 0008 09:56:35 Msec=3750 True Az=151.59 Ze=66.495 Az status=0009 Ze status=0008 09:56:35 Check angles 09:56:35 SkyScan query 09:56:35 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 09:56:35 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 09:56:35 Message to Master queued w/err=0: serial=7307 error=0 09:56:40 Received message from Master: op=Filter serial=7308 09:56:40 Color wheel filter change from 0 to 0 09:56:40 FLIGetFilterPos err=0 currentPosition=0 09:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 09:56:40 Filter is already there-color wheel unchanged 09:56:41 Received message from Master: op=Shutter serial=7309 09:56:41 Shutter LASER close 09:56:41 Received message from Camera: op=State serial=7311 09:56:41 GetSingleValue result=40 Value=cccccccc 09:56:41 SkyScan query 09:56:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 09:56:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:41 Parameters OK 09:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:41 Set A/D data flow result=40 09:56:41 Set A/D channel type result=40 09:56:41 Set A/D encoding result=40 09:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:41 Set channel filter=0.000000e+000 result=40 09:56:41 Config A/D Result=40 09:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:41 Get A/D filter: -9.255963e+061 result=40 09:56:41 Get A/D value=-858993460 result=40 09:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:56:41 Parameters OK 09:56:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:56:41 Set A/D data flow result=40 09:56:41 Set A/D channel type result=40 09:56:41 Set A/D encoding result=40 09:56:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:56:41 Set channel filter=0.000000e+000 result=40 09:56:41 Config A/D Result=40 09:56:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:56:41 Get A/D filter: -9.255963e+061 result=40 09:56:41 Get A/D value=-858993460 result=40 09:56:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:56:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:56:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:56:41 Aux= 09:56:41 Message to Camera, serial 7311 queued 09:57:12 Received message from Master: op=PointingHead serial=7318 09:57:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 09:57:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 09:57:12 Point started: ret=0 09:57:12 point_skyscan result=0 09:57:13 Check angles 09:57:13 SkyScan query 09:57:14 SkyScan query done: ret=0 az=134.865<-8991 ze=36.6<-9560 Statuses=0009 0009 09:57:14 Msec=0 True Az=134.865 Ze=36.6 Az status=0009 Ze status=0009 09:57:14 Check angles 09:57:14 SkyScan query 09:57:14 SkyScan query done: ret=0 az=117.315<-7821 ze=15.66<-10956 Statuses=0009 0009 09:57:14 Msec=750 True Az=117.315 Ze=15.66 Az status=0009 Ze status=0009 09:57:15 Check angles 09:57:15 SkyScan query 09:57:15 SkyScan query done: ret=0 az=99.675<-6645 ze=-5.73<-12382 Statuses=0009 0009 09:57:15 Msec=1500 True Az=99.675 Ze=-5.73 Az status=0009 Ze status=0009 09:57:15 Check angles 09:57:15 SkyScan query 09:57:16 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.7<-13780 Statuses=0009 0009 09:57:16 Msec=2250 True Az=82.23 Ze=-26.7 Az status=0009 Ze status=0009 09:57:16 Check angles 09:57:16 SkyScan query 09:57:17 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 09:57:17 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 09:57:17 Check angles 09:57:17 SkyScan query 09:57:17 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.535<-14569 Statuses=0009 0008 09:57:17 Msec=3750 True Az=46.8 Ze=-38.535 Az status=0009 Ze status=0008 09:57:18 Check angles 09:57:18 SkyScan query 09:57:18 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 09:57:18 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 09:57:18 Message to Master queued w/err=0: serial=7318 error=0 09:57:23 Received message from Master: op=Filter serial=7319 09:57:23 Color wheel filter change from 0 to 0 09:57:23 FLIGetFilterPos err=0 currentPosition=0 09:57:23 FLIGetStepsRemaining err=0 RemainingSteps=0 09:57:23 Filter is already there-color wheel unchanged 09:57:23 Received message from Master: op=Shutter serial=7320 09:57:23 Shutter LASER close 09:57:23 Received message from Camera: op=State serial=7322 09:57:23 GetSingleValue result=40 Value=cccccccc 09:57:23 SkyScan query 09:57:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 09:57:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:24 Parameters OK 09:57:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:24 Set A/D data flow result=40 09:57:24 Set A/D channel type result=40 09:57:24 Set A/D encoding result=40 09:57:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:24 Set channel filter=0.000000e+000 result=40 09:57:24 Config A/D Result=40 09:57:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:24 Get A/D filter: -9.255963e+061 result=40 09:57:24 Get A/D value=-858993460 result=40 09:57:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:57:24 Parameters OK 09:57:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:57:24 Set A/D data flow result=40 09:57:24 Set A/D channel type result=40 09:57:24 Set A/D encoding result=40 09:57:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:57:24 Set channel filter=0.000000e+000 result=40 09:57:24 Config A/D Result=40 09:57:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:57:24 Get A/D filter: -9.255963e+061 result=40 09:57:24 Get A/D value=-858993460 result=40 09:57:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:57:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:57:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:57:24 Aux= 09:57:24 Message to Camera, serial 7322 queued 09:57:55 Received message from Master: op=PointingHead serial=7329 09:57:55 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 09:57:55 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 09:57:55 Point started: ret=0 09:57:55 point_skyscan result=0 09:57:56 Check angles 09:57:56 SkyScan query 09:57:57 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.52<-16568 Statuses=0009 0009 09:57:57 Msec=0 True Az=64.185 Ze=-68.52 Az status=0009 Ze status=0009 09:57:57 Check angles 09:57:57 SkyScan query 09:57:57 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.49<-17966 Statuses=0009 0009 09:57:57 Msec=750 True Az=81.84 Ze=-89.49 Az status=0009 Ze status=0009 09:57:57 Check angles 09:57:57 SkyScan query 09:57:58 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.43<-19362 Statuses=0009 0009 09:57:58 Msec=1500 True Az=99.285 Ze=-110.43 Az status=0009 Ze status=0009 09:57:58 Check angles 09:57:58 SkyScan query 09:57:59 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.385<-20759 Statuses=0009 0009 09:57:59 Msec=2250 True Az=116.79 Ze=-131.385 Az status=0009 Ze status=0009 09:57:59 Check angles 09:57:59 SkyScan query 09:58:00 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 09:58:00 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 09:58:00 Check angles 09:58:00 SkyScan query 09:58:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 09:58:00 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 09:58:00 Message to Master queued w/err=0: serial=7329 error=0 09:58:05 Received message from Master: op=Filter serial=7330 09:58:05 Color wheel filter change from 0 to 0 09:58:05 FLIGetFilterPos err=0 currentPosition=0 09:58:05 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:05 Filter is already there-color wheel unchanged 09:58:05 Received message from Master: op=Shutter serial=7331 09:58:05 Shutter LASER close 09:58:06 Received message from Camera: op=State serial=7333 09:58:06 GetSingleValue result=40 Value=cccccccc 09:58:06 SkyScan query 09:58:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 09:58:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:06 Parameters OK 09:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:06 Set A/D data flow result=40 09:58:06 Set A/D channel type result=40 09:58:06 Set A/D encoding result=40 09:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:06 Set channel filter=0.000000e+000 result=40 09:58:06 Config A/D Result=40 09:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:06 Get A/D filter: -9.255963e+061 result=40 09:58:06 Get A/D value=-858993460 result=40 09:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:06 Parameters OK 09:58:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:06 Set A/D data flow result=40 09:58:06 Set A/D channel type result=40 09:58:06 Set A/D encoding result=40 09:58:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:06 Set channel filter=0.000000e+000 result=40 09:58:06 Config A/D Result=40 09:58:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:06 Get A/D filter: -9.255963e+061 result=40 09:58:06 Get A/D value=-858993460 result=40 09:58:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:06 Aux= 09:58:06 Message to Camera, serial 7333 queued 09:58:37 Received message from Master: op=PointingHead serial=7340 09:58:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 09:58:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 09:58:37 Point started: ret=0 09:58:37 point_skyscan result=0 09:58:38 Check angles 09:58:38 SkyScan query 09:58:39 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.135<-23409 Statuses=0009 0009 09:58:39 Msec=0 True Az=113.025 Ze=-171.135 Az status=0009 Ze status=0009 09:58:39 Check angles 09:58:39 SkyScan query 09:58:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 09:58:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 09:58:39 Message to Master queued w/err=0: serial=7340 error=0 09:58:44 Received message from Master: op=Filter serial=7341 09:58:44 Color wheel filter change from 0 to 0 09:58:44 FLIGetFilterPos err=0 currentPosition=0 09:58:44 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:44 Filter is already there-color wheel unchanged 09:58:45 Received message from Master: op=Shutter serial=7342 09:58:45 Shutter LASER open 09:58:45 Received message from Camera: op=State serial=7344 09:58:45 GetSingleValue result=40 Value=cccccccc 09:58:45 SkyScan query 09:58:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 09:58:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:45 Parameters OK 09:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:45 Set A/D data flow result=40 09:58:45 Set A/D channel type result=40 09:58:45 Set A/D encoding result=40 09:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:45 Set channel filter=0.000000e+000 result=40 09:58:45 Config A/D Result=40 09:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:45 Get A/D filter: -9.255963e+061 result=40 09:58:45 Get A/D value=-858993460 result=40 09:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:58:45 Parameters OK 09:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:58:45 Set A/D data flow result=40 09:58:45 Set A/D channel type result=40 09:58:45 Set A/D encoding result=40 09:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:58:45 Set channel filter=0.000000e+000 result=40 09:58:45 Config A/D Result=40 09:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:58:45 Get A/D filter: -9.255963e+061 result=40 09:58:45 Get A/D value=-858993460 result=40 09:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:58:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:58:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:58:45 Aux= 09:58:45 Message to Camera, serial 7344 queued 09:58:48 Received message from Master: op=Shutter serial=7348 09:58:48 Shutter LASER close 09:58:48 Received message from Master: op=PointingHead serial=7352 09:58:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 09:58:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 09:58:49 Point started: ret=0 09:58:49 point_skyscan result=0 09:58:50 Check angles 09:58:50 SkyScan query 09:58:50 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.145<-21543 Statuses=0009 0009 09:58:50 Msec=0 True Az=135.975 Ze=-143.145 Az status=0009 Ze status=0009 09:58:50 Check angles 09:58:50 SkyScan query 09:58:51 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.19<-20146 Statuses=0009 0009 09:58:51 Msec=750 True Az=153.615 Ze=-122.19 Az status=0009 Ze status=0009 09:58:51 Check angles 09:58:51 SkyScan query 09:58:52 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.8<-18720 Statuses=0009 0009 09:58:52 Msec=1500 True Az=171.255 Ze=-100.8 Az status=0009 Ze status=0009 09:58:52 Check angles 09:58:52 SkyScan query 09:58:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.395<-17293 Statuses=0008 0009 09:58:52 Msec=2250 True Az=176.01 Ze=-79.395 Az status=0008 Ze status=0009 09:58:53 Check angles 09:58:53 SkyScan query 09:58:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.44<-15896 Statuses=0008 0009 09:58:53 Msec=3000 True Az=175.995 Ze=-58.44 Az status=0008 Ze status=0009 09:58:53 Check angles 09:58:53 SkyScan query 09:58:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 09:58:54 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 09:58:54 Message to Master queued w/err=0: serial=7352 error=0 09:58:59 Received message from Master: op=Filter serial=7353 09:58:59 Color wheel filter change from 0 to 0 09:58:59 FLIGetFilterPos err=0 currentPosition=0 09:58:59 FLIGetStepsRemaining err=0 RemainingSteps=0 09:58:59 Filter is already there-color wheel unchanged 09:58:59 Received message from Master: op=Shutter serial=7354 09:58:59 Shutter LASER close 09:58:59 Received message from Camera: op=State serial=7356 09:58:59 GetSingleValue result=40 Value=cccccccc 09:58:59 SkyScan query 09:59:00 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 09:59:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:00 Parameters OK 09:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:00 Set A/D data flow result=40 09:59:00 Set A/D channel type result=40 09:59:00 Set A/D encoding result=40 09:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:00 Set channel filter=0.000000e+000 result=40 09:59:00 Config A/D Result=40 09:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:00 Get A/D filter: -9.255963e+061 result=40 09:59:00 Get A/D value=-858993460 result=40 09:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:00 Parameters OK 09:59:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:00 Set A/D data flow result=40 09:59:00 Set A/D channel type result=40 09:59:00 Set A/D encoding result=40 09:59:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:00 Set channel filter=0.000000e+000 result=40 09:59:00 Config A/D Result=40 09:59:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:00 Get A/D filter: -9.255963e+061 result=40 09:59:00 Get A/D value=-858993460 result=40 09:59:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:00 Aux= 09:59:00 Message to Camera, serial 7356 queued 09:59:31 Received message from Master: op=PointingHead serial=7363 09:59:31 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 09:59:31 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 09:59:31 Point started: ret=0 09:59:31 point_skyscan result=0 09:59:32 Check angles 09:59:32 SkyScan query 09:59:32 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.915<-13461 Statuses=0009 0009 09:59:32 Msec=0 True Az=153.21 Ze=-21.915 Az status=0009 Ze status=0009 09:59:33 Check angles 09:59:33 SkyScan query 09:59:33 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.615<-12041 Statuses=0009 0009 09:59:33 Msec=750 True Az=135.39 Ze=-0.615 Az status=0009 Ze status=0009 09:59:33 Check angles 09:59:33 SkyScan query 09:59:34 SkyScan query done: ret=0 az=117.825<-7855 ze=20.34<-10644 Statuses=0009 0009 09:59:34 Msec=1500 True Az=117.825 Ze=20.34 Az status=0009 Ze status=0009 09:59:34 Check angles 09:59:34 SkyScan query 09:59:35 SkyScan query done: ret=0 az=100.425<-6695 ze=41.295<-9247 Statuses=0009 0009 09:59:35 Msec=2250 True Az=100.425 Ze=41.295 Az status=0009 Ze status=0009 09:59:35 Check angles 09:59:35 SkyScan query 09:59:35 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 09:59:35 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 09:59:36 Check angles 09:59:36 SkyScan query 09:59:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 09:59:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 09:59:36 Message to Master queued w/err=0: serial=7363 error=0 09:59:41 Received message from Master: op=Filter serial=7364 09:59:41 Color wheel filter change from 0 to 0 09:59:41 FLIGetFilterPos err=0 currentPosition=0 09:59:41 FLIGetStepsRemaining err=0 RemainingSteps=0 09:59:41 Filter is already there-color wheel unchanged 09:59:41 Received message from Master: op=Shutter serial=7365 09:59:41 Shutter LASER close 09:59:41 Received message from Camera: op=State serial=7367 09:59:41 GetSingleValue result=40 Value=cccccccc 09:59:41 SkyScan query 09:59:42 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 09:59:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:42 Parameters OK 09:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:42 Set A/D data flow result=40 09:59:42 Set A/D channel type result=40 09:59:42 Set A/D encoding result=40 09:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:42 Set channel filter=0.000000e+000 result=40 09:59:42 Config A/D Result=40 09:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:42 Get A/D filter: -9.255963e+061 result=40 09:59:42 Get A/D value=-858993460 result=40 09:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 09:59:42 Parameters OK 09:59:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 09:59:42 Set A/D data flow result=40 09:59:42 Set A/D channel type result=40 09:59:42 Set A/D encoding result=40 09:59:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 09:59:42 Set channel filter=0.000000e+000 result=40 09:59:42 Config A/D Result=40 09:59:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 09:59:42 Get A/D filter: -9.255963e+061 result=40 09:59:42 Get A/D value=-858993460 result=40 09:59:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 09:59:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 09:59:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 09:59:42 Aux= 09:59:42 Message to Camera, serial 7367 queued 10:00:13 Received message from Master: op=PointingHead serial=7374 10:00:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:00:13 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:00:13 Point started: ret=0 10:00:13 point_skyscan result=0 10:00:14 Check angles 10:00:14 SkyScan query 10:00:14 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 10:00:14 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 10:00:15 Check angles 10:00:15 SkyScan query 10:00:15 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 10:00:15 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 10:00:15 Check angles 10:00:15 SkyScan query 10:00:16 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 10:00:16 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 10:00:16 Check angles 10:00:16 SkyScan query 10:00:17 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 10:00:17 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 10:00:17 Check angles 10:00:17 SkyScan query 10:00:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:00:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:00:18 Check angles 10:00:18 SkyScan query 10:00:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:00:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:00:18 Message to Master queued w/err=0: serial=7374 error=0 10:00:23 Received message from Master: op=Filter serial=7375 10:00:23 Color wheel filter change from 0 to 0 10:00:23 FLIGetFilterPos err=0 currentPosition=0 10:00:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:00:23 Filter is already there-color wheel unchanged 10:00:23 Received message from Master: op=Shutter serial=7376 10:00:23 Shutter LASER close 10:00:23 Received message from Camera: op=State serial=7378 10:00:23 GetSingleValue result=40 Value=cccccccc 10:00:23 SkyScan query 10:00:24 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:00:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:24 Parameters OK 10:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:24 Set A/D data flow result=40 10:00:24 Set A/D channel type result=40 10:00:24 Set A/D encoding result=40 10:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:24 Set channel filter=0.000000e+000 result=40 10:00:24 Config A/D Result=40 10:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:24 Get A/D filter: -9.255963e+061 result=40 10:00:24 Get A/D value=-858993460 result=40 10:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:00:24 Parameters OK 10:00:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:00:24 Set A/D data flow result=40 10:00:24 Set A/D channel type result=40 10:00:24 Set A/D encoding result=40 10:00:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:00:24 Set channel filter=0.000000e+000 result=40 10:00:24 Config A/D Result=40 10:00:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:00:24 Get A/D filter: -9.255963e+061 result=40 10:00:24 Get A/D value=-858993460 result=40 10:00:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:00:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:00:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:00:24 Aux= 10:00:24 Message to Camera, serial 7378 queued 10:00:55 Received message from Master: op=PointingHead serial=7385 10:00:55 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:00:55 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:00:55 Point started: ret=0 10:00:55 point_skyscan result=0 10:00:56 Check angles 10:00:56 SkyScan query 10:00:57 SkyScan query done: ret=0 az=153.135<-10209 ze=8.97<-11402 Statuses=0009 0009 10:00:57 Msec=0 True Az=153.135 Ze=8.97 Az status=0009 Ze status=0009 10:00:57 Check angles 10:00:57 SkyScan query 10:00:57 SkyScan query done: ret=0 az=135.765<-9051 ze=-11.97<-12798 Statuses=0009 0009 10:00:57 Msec=750 True Az=135.765 Ze=-11.97 Az status=0009 Ze status=0009 10:00:57 Check angles 10:00:57 SkyScan query 10:00:58 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.33<-14222 Statuses=0009 0009 10:00:58 Msec=1500 True Az=117.81 Ze=-33.33 Az status=0009 Ze status=0009 10:00:58 Check angles 10:00:58 SkyScan query [UTC 2018-12-4 10:00:59] 10:00:59 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 10:00:59 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 10:00:59 Check angles 10:00:59 SkyScan query 10:01:00 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:01:00 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:01:00 Check angles 10:01:00 SkyScan query 10:01:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:01:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:01:00 Message to Master queued w/err=0: serial=7385 error=0 10:01:05 Received message from Master: op=Filter serial=7386 10:01:05 Color wheel filter change from 0 to 0 10:01:05 FLIGetFilterPos err=0 currentPosition=0 10:01:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:05 Filter is already there-color wheel unchanged 10:01:05 Received message from Master: op=Shutter serial=7387 10:01:05 Shutter LASER close 10:01:06 Received message from Camera: op=State serial=7389 10:01:06 GetSingleValue result=40 Value=cccccccc 10:01:06 SkyScan query 10:01:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:01:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:06 Parameters OK 10:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:06 Set A/D data flow result=40 10:01:06 Set A/D channel type result=40 10:01:06 Set A/D encoding result=40 10:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:06 Set channel filter=0.000000e+000 result=40 10:01:06 Config A/D Result=40 10:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:06 Get A/D filter: -9.255963e+061 result=40 10:01:06 Get A/D value=-858993460 result=40 10:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:06 Parameters OK 10:01:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:06 Set A/D data flow result=40 10:01:06 Set A/D channel type result=40 10:01:06 Set A/D encoding result=40 10:01:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:06 Set channel filter=0.000000e+000 result=40 10:01:06 Config A/D Result=40 10:01:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:06 Get A/D filter: -9.255963e+061 result=40 10:01:06 Get A/D value=-858993460 result=40 10:01:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:06 Aux= 10:01:06 Message to Camera, serial 7389 queued 10:01:37 Received message from Master: op=PointingHead serial=7396 10:01:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:01:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:01:37 Point started: ret=0 10:01:37 point_skyscan result=0 10:01:38 Check angles 10:01:38 SkyScan query 10:01:39 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.105<-17407 Statuses=0009 0009 10:01:39 Msec=0 True Az=108.99 Ze=-81.105 Az status=0009 Ze status=0009 10:01:39 Check angles 10:01:39 SkyScan query 10:01:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 10:01:39 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 10:01:40 Check angles 10:01:40 SkyScan query 10:01:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.87<-20258 Statuses=0008 0009 10:01:40 Msec=1500 True Az=112.995 Ze=-123.87 Az status=0008 Ze status=0009 10:01:40 Check angles 10:01:40 SkyScan query 10:01:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 10:01:41 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 10:01:41 Check angles 10:01:41 SkyScan query 10:01:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 10:01:42 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 10:01:42 Check angles 10:01:42 SkyScan query 10:01:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:01:42 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:01:42 Message to Master queued w/err=0: serial=7396 error=0 10:01:47 Received message from Master: op=Filter serial=7397 10:01:47 Color wheel filter change from 0 to 0 10:01:47 FLIGetFilterPos err=0 currentPosition=0 10:01:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:01:47 Filter is already there-color wheel unchanged 10:01:48 Received message from Master: op=Shutter serial=7398 10:01:48 Shutter LASER open 10:01:48 Received message from Camera: op=State serial=7400 10:01:48 GetSingleValue result=40 Value=cccccccc 10:01:48 SkyScan query 10:01:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:01:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:48 Parameters OK 10:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:48 Set A/D data flow result=40 10:01:48 Set A/D channel type result=40 10:01:48 Set A/D encoding result=40 10:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:48 Set channel filter=0.000000e+000 result=40 10:01:48 Config A/D Result=40 10:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:48 Get A/D filter: -9.255963e+061 result=40 10:01:48 Get A/D value=-858993460 result=40 10:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:01:48 Parameters OK 10:01:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:01:48 Set A/D data flow result=40 10:01:48 Set A/D channel type result=40 10:01:48 Set A/D encoding result=40 10:01:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:01:48 Set channel filter=0.000000e+000 result=40 10:01:48 Config A/D Result=40 10:01:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:01:48 Get A/D filter: -9.255963e+061 result=40 10:01:48 Get A/D value=-858993460 result=40 10:01:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:01:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:01:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:01:48 Aux= 10:01:48 Message to Camera, serial 7400 queued 10:01:51 Received message from Master: op=Shutter serial=7404 10:01:51 Shutter LASER close 10:01:51 Received message from Master: op=PointingHead serial=7408 10:01:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:01:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:01:52 Point started: ret=0 10:01:52 point_skyscan result=0 10:01:52 Check angles 10:01:52 SkyScan query 10:01:53 SkyScan query done: ret=0 az=90.075<-6005 ze=157.425<-1505 Statuses=0009 0009 10:01:53 Msec=0 True Az=90.075 Ze=157.425 Az status=0009 Ze status=0009 10:01:53 Check angles 10:01:53 SkyScan query 10:01:54 SkyScan query done: ret=0 az=72.255<-4817 ze=136.035<-2931 Statuses=0009 0009 10:01:54 Msec=750 True Az=72.255 Ze=136.035 Az status=0009 Ze status=0009 10:01:54 Check angles 10:01:54 SkyScan query 10:01:54 SkyScan query done: ret=0 az=54.825<-3655 ze=115.095<-4327 Statuses=0009 0009 10:01:54 Msec=1500 True Az=54.825 Ze=115.095 Az status=0009 Ze status=0009 10:01:55 Check angles 10:01:55 SkyScan query 10:01:55 SkyScan query done: ret=0 az=40.83<-2722 ze=94.125<-5725 Statuses=0009 0009 10:01:55 Msec=2250 True Az=40.83 Ze=94.125 Az status=0009 Ze status=0009 10:01:55 Check angles 10:01:55 SkyScan query 10:01:56 SkyScan query done: ret=0 az=41.01<-2734 ze=72.72<-7152 Statuses=0008 0009 10:01:56 Msec=3000 True Az=41.01 Ze=72.72 Az status=0008 Ze status=0009 10:01:56 Check angles 10:01:56 SkyScan query 10:01:57 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 10:01:57 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 10:01:57 Check angles 10:01:57 SkyScan query 10:01:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:01:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:01:57 Message to Master queued w/err=0: serial=7408 error=0 10:02:02 Received message from Master: op=Filter serial=7409 10:02:02 Color wheel filter change from 0 to 0 10:02:02 FLIGetFilterPos err=0 currentPosition=0 10:02:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:02 Filter is already there-color wheel unchanged 10:02:03 Received message from Master: op=Shutter serial=7410 10:02:03 Shutter LASER close 10:02:03 Received message from Camera: op=State serial=7412 10:02:03 GetSingleValue result=40 Value=cccccccc 10:02:03 SkyScan query 10:02:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:02:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:03 Parameters OK 10:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:03 Set A/D data flow result=40 10:02:03 Set A/D channel type result=40 10:02:03 Set A/D encoding result=40 10:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:03 Set channel filter=0.000000e+000 result=40 10:02:03 Config A/D Result=40 10:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:03 Get A/D filter: -9.255963e+061 result=40 10:02:03 Get A/D value=-858993460 result=40 10:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:03 Parameters OK 10:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:03 Set A/D data flow result=40 10:02:03 Set A/D channel type result=40 10:02:03 Set A/D encoding result=40 10:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:03 Set channel filter=0.000000e+000 result=40 10:02:03 Config A/D Result=40 10:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:03 Get A/D filter: -9.255963e+061 result=40 10:02:03 Get A/D value=-858993460 result=40 10:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:03 Aux= 10:02:03 Message to Camera, serial 7412 queued 10:02:34 Received message from Master: op=PointingHead serial=7419 10:02:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:02:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:02:35 Point started: ret=0 10:02:35 point_skyscan result=0 10:02:35 Check angles 10:02:35 SkyScan query 10:02:36 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 10:02:36 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 10:02:36 Check angles 10:02:36 SkyScan query 10:02:37 SkyScan query done: ret=0 az=81.42<-5428 ze=66.495<-7567 Statuses=0009 0008 10:02:37 Msec=750 True Az=81.42 Ze=66.495 Az status=0009 Ze status=0008 10:02:37 Check angles 10:02:37 SkyScan query 10:02:37 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 10:02:37 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 10:02:38 Check angles 10:02:38 SkyScan query 10:02:38 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 10:02:38 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 10:02:38 Check angles 10:02:38 SkyScan query 10:02:39 SkyScan query done: ret=0 az=134.19<-8946 ze=66.495<-7567 Statuses=0009 0008 10:02:39 Msec=3000 True Az=134.19 Ze=66.495 Az status=0009 Ze status=0008 10:02:39 Check angles 10:02:39 SkyScan query 10:02:40 SkyScan query done: ret=0 az=151.53<-10102 ze=66.495<-7567 Statuses=0009 0008 10:02:40 Msec=3750 True Az=151.53 Ze=66.495 Az status=0009 Ze status=0008 10:02:40 Check angles 10:02:40 SkyScan query 10:02:40 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:02:40 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:02:40 Message to Master queued w/err=0: serial=7419 error=0 10:02:45 Received message from Master: op=Filter serial=7420 10:02:45 Color wheel filter change from 0 to 0 10:02:45 FLIGetFilterPos err=0 currentPosition=0 10:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:02:45 Filter is already there-color wheel unchanged 10:02:46 Received message from Master: op=Shutter serial=7421 10:02:46 Shutter LASER close 10:02:46 Received message from Camera: op=State serial=7423 10:02:46 GetSingleValue result=40 Value=cccccccc 10:02:46 SkyScan query 10:02:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:02:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:46 Parameters OK 10:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:46 Set A/D data flow result=40 10:02:46 Set A/D channel type result=40 10:02:46 Set A/D encoding result=40 10:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:46 Set channel filter=0.000000e+000 result=40 10:02:46 Config A/D Result=40 10:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:46 Get A/D filter: -9.255963e+061 result=40 10:02:46 Get A/D value=-858993460 result=40 10:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:02:46 Parameters OK 10:02:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:02:46 Set A/D data flow result=40 10:02:46 Set A/D channel type result=40 10:02:46 Set A/D encoding result=40 10:02:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:02:46 Set channel filter=0.000000e+000 result=40 10:02:46 Config A/D Result=40 10:02:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:02:46 Get A/D filter: -9.255963e+061 result=40 10:02:46 Get A/D value=-858993460 result=40 10:02:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:02:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:02:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:02:46 Aux= 10:02:46 Message to Camera, serial 7423 queued 10:03:17 Received message from Master: op=PointingHead serial=7430 10:03:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:03:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:03:17 Point started: ret=0 10:03:17 point_skyscan result=0 10:03:18 Check angles 10:03:18 SkyScan query 10:03:19 SkyScan query done: ret=0 az=134.88<-8992 ze=36.57<-9562 Statuses=0009 0009 10:03:19 Msec=0 True Az=134.88 Ze=36.57 Az status=0009 Ze status=0009 10:03:19 Check angles 10:03:19 SkyScan query 10:03:19 SkyScan query done: ret=0 az=117.315<-7821 ze=15.63<-10958 Statuses=0009 0009 10:03:19 Msec=750 True Az=117.315 Ze=15.63 Az status=0009 Ze status=0009 10:03:20 Check angles 10:03:20 SkyScan query 10:03:20 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.355<-12357 Statuses=0009 0009 10:03:20 Msec=1500 True Az=99.945 Ze=-5.355 Az status=0009 Ze status=0009 10:03:20 Check angles 10:03:20 SkyScan query 10:03:21 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.31<-13754 Statuses=0009 0009 10:03:21 Msec=2250 True Az=82.485 Ze=-26.31 Az status=0009 Ze status=0009 10:03:21 Check angles 10:03:21 SkyScan query 10:03:22 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 10:03:22 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 10:03:22 Check angles 10:03:22 SkyScan query 10:03:22 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 10:03:22 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 10:03:23 Check angles 10:03:23 SkyScan query 10:03:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:03:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:03:23 Message to Master queued w/err=0: serial=7430 error=0 10:03:28 Received message from Master: op=Filter serial=7431 10:03:28 Color wheel filter change from 0 to 0 10:03:28 FLIGetFilterPos err=0 currentPosition=0 10:03:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:03:28 Filter is already there-color wheel unchanged 10:03:28 Received message from Master: op=Shutter serial=7432 10:03:28 Shutter LASER close 10:03:28 Received message from Camera: op=State serial=7434 10:03:28 GetSingleValue result=40 Value=cccccccc 10:03:28 SkyScan query 10:03:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:03:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:29 Parameters OK 10:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:29 Set A/D data flow result=40 10:03:29 Set A/D channel type result=40 10:03:29 Set A/D encoding result=40 10:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:29 Set channel filter=0.000000e+000 result=40 10:03:29 Config A/D Result=40 10:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:29 Get A/D filter: -9.255963e+061 result=40 10:03:29 Get A/D value=-858993460 result=40 10:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:03:29 Parameters OK 10:03:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:03:29 Set A/D data flow result=40 10:03:29 Set A/D channel type result=40 10:03:29 Set A/D encoding result=40 10:03:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:03:29 Set channel filter=0.000000e+000 result=40 10:03:29 Config A/D Result=40 10:03:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:03:29 Get A/D filter: -9.255963e+061 result=40 10:03:29 Get A/D value=-858993460 result=40 10:03:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:03:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:03:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:03:29 Aux= 10:03:29 Message to Camera, serial 7434 queued 10:04:00 Received message from Master: op=PointingHead serial=7441 10:04:00 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:04:00 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:04:00 Point started: ret=0 10:04:00 point_skyscan result=0 10:04:01 Check angles 10:04:01 SkyScan query 10:04:02 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.355<-16557 Statuses=0009 0009 10:04:02 Msec=0 True Az=63.96 Ze=-68.355 Az status=0009 Ze status=0009 10:04:02 Check angles 10:04:02 SkyScan query 10:04:02 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.31<-17954 Statuses=0009 0009 10:04:02 Msec=750 True Az=81.615 Ze=-89.31 Az status=0009 Ze status=0009 10:04:02 Check angles 10:04:02 SkyScan query 10:04:03 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.25<-19350 Statuses=0009 0009 10:04:03 Msec=1500 True Az=99.21 Ze=-110.25 Az status=0009 Ze status=0009 10:04:03 Check angles 10:04:03 SkyScan query 10:04:04 SkyScan query done: ret=0 az=116.475<-7765 ze=-131.205<-20747 Statuses=0009 0009 10:04:04 Msec=2250 True Az=116.475 Ze=-131.205 Az status=0009 Ze status=0009 10:04:04 Check angles 10:04:04 SkyScan query 10:04:05 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 10:04:05 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 10:04:05 Check angles 10:04:05 SkyScan query 10:04:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:04:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:04:05 Message to Master queued w/err=0: serial=7441 error=0 10:04:10 Received message from Master: op=Filter serial=7442 10:04:10 Color wheel filter change from 0 to 0 10:04:10 FLIGetFilterPos err=0 currentPosition=0 10:04:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:10 Filter is already there-color wheel unchanged 10:04:10 Received message from Master: op=Shutter serial=7443 10:04:10 Shutter LASER close 10:04:11 Received message from Camera: op=State serial=7445 10:04:11 GetSingleValue result=40 Value=cccccccc 10:04:11 SkyScan query 10:04:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:04:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:11 Parameters OK 10:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:11 Set A/D data flow result=40 10:04:11 Set A/D channel type result=40 10:04:11 Set A/D encoding result=40 10:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:11 Set channel filter=0.000000e+000 result=40 10:04:11 Config A/D Result=40 10:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:11 Get A/D filter: -9.255963e+061 result=40 10:04:11 Get A/D value=-858993460 result=40 10:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:11 Parameters OK 10:04:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:11 Set A/D data flow result=40 10:04:11 Set A/D channel type result=40 10:04:11 Set A/D encoding result=40 10:04:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:11 Set channel filter=0.000000e+000 result=40 10:04:11 Config A/D Result=40 10:04:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:11 Get A/D filter: -9.255963e+061 result=40 10:04:11 Get A/D value=-858993460 result=40 10:04:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:11 Aux= 10:04:11 Message to Camera, serial 7445 queued 10:04:42 Received message from Master: op=PointingHead serial=7452 10:04:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:04:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:04:42 Point started: ret=0 10:04:42 point_skyscan result=0 10:04:43 Check angles 10:04:43 SkyScan query 10:04:44 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.15<-23410 Statuses=0009 0009 10:04:44 Msec=0 True Az=113.025 Ze=-171.15 Az status=0009 Ze status=0009 10:04:44 Check angles 10:04:44 SkyScan query 10:04:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:04:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:04:44 Message to Master queued w/err=0: serial=7452 error=0 10:04:49 Received message from Master: op=Filter serial=7453 10:04:49 Color wheel filter change from 0 to 0 10:04:49 FLIGetFilterPos err=0 currentPosition=0 10:04:49 FLIGetStepsRemaining err=0 RemainingSteps=0 10:04:49 Filter is already there-color wheel unchanged 10:04:50 Received message from Master: op=Shutter serial=7454 10:04:50 Shutter LASER open 10:04:50 Received message from Camera: op=State serial=7456 10:04:50 GetSingleValue result=40 Value=cccccccc 10:04:50 SkyScan query 10:04:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:04:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:50 Parameters OK 10:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:50 Set A/D data flow result=40 10:04:50 Set A/D channel type result=40 10:04:50 Set A/D encoding result=40 10:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:50 Set channel filter=0.000000e+000 result=40 10:04:50 Config A/D Result=40 10:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:50 Get A/D filter: -9.255963e+061 result=40 10:04:50 Get A/D value=-858993460 result=40 10:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:04:50 Parameters OK 10:04:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:04:50 Set A/D data flow result=40 10:04:50 Set A/D channel type result=40 10:04:50 Set A/D encoding result=40 10:04:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:04:50 Set channel filter=0.000000e+000 result=40 10:04:50 Config A/D Result=40 10:04:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:04:50 Get A/D filter: -9.255963e+061 result=40 10:04:50 Get A/D value=-858993460 result=40 10:04:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:04:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:04:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:04:50 Aux= 10:04:50 Message to Camera, serial 7456 queued 10:04:53 Received message from Master: op=Shutter serial=7460 10:04:53 Shutter LASER close 10:04:53 Received message from Master: op=PointingHead serial=7464 10:04:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:04:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:04:54 Point started: ret=0 10:04:54 point_skyscan result=0 10:04:54 Check angles 10:04:54 SkyScan query 10:04:55 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.07<-21538 Statuses=0009 0009 10:04:55 Msec=0 True Az=136.185 Ze=-143.07 Az status=0009 Ze status=0009 10:04:55 Check angles 10:04:55 SkyScan query 10:04:56 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.055<-20137 Statuses=0009 0009 10:04:56 Msec=750 True Az=153.705 Ze=-122.055 Az status=0009 Ze status=0009 10:04:56 Check angles 10:04:56 SkyScan query 10:04:56 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.145<-18743 Statuses=0009 0009 10:04:56 Msec=1500 True Az=171.015 Ze=-101.145 Az status=0009 Ze status=0009 10:04:57 Check angles 10:04:57 SkyScan query 10:04:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.19<-17346 Statuses=0008 0009 10:04:57 Msec=2250 True Az=176.025 Ze=-80.19 Az status=0008 Ze status=0009 10:04:57 Check angles 10:04:57 SkyScan query 10:04:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 10:04:58 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 10:04:58 Check angles 10:04:58 SkyScan query 10:04:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:04:59 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:04:59 Message to Master queued w/err=0: serial=7464 error=0 10:05:04 Received message from Master: op=Filter serial=7465 10:05:04 Color wheel filter change from 0 to 0 10:05:04 FLIGetFilterPos err=0 currentPosition=0 10:05:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:04 Filter is already there-color wheel unchanged 10:05:04 Received message from Master: op=Shutter serial=7466 10:05:04 Shutter LASER close 10:05:04 Received message from Camera: op=State serial=7468 10:05:04 GetSingleValue result=40 Value=cccccccc 10:05:04 SkyScan query 10:05:05 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:05:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:05 Parameters OK 10:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:05 Set A/D data flow result=40 10:05:05 Set A/D channel type result=40 10:05:05 Set A/D encoding result=40 10:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:05 Set channel filter=0.000000e+000 result=40 10:05:05 Config A/D Result=40 10:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:05 Get A/D filter: -9.255963e+061 result=40 10:05:05 Get A/D value=-858993460 result=40 10:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:05 Parameters OK 10:05:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:05 Set A/D data flow result=40 10:05:05 Set A/D channel type result=40 10:05:05 Set A/D encoding result=40 10:05:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:05 Set channel filter=0.000000e+000 result=40 10:05:05 Config A/D Result=40 10:05:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:05 Get A/D filter: -9.255963e+061 result=40 10:05:05 Get A/D value=-858993460 result=40 10:05:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:05 Aux= 10:05:05 Message to Camera, serial 7468 queued 10:05:35 Received message from Master: op=PointingHead serial=7475 10:05:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:05:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:05:36 Point started: ret=0 10:05:36 point_skyscan result=0 10:05:37 Check angles 10:05:37 SkyScan query 10:05:37 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.645<-13443 Statuses=0009 0009 10:05:37 Msec=0 True Az=152.94 Ze=-21.645 Az status=0009 Ze status=0009 10:05:37 Check angles 10:05:37 SkyScan query 10:05:38 SkyScan query done: ret=0 az=135.045<-9003 ze=-0.24<-12016 Statuses=0009 0009 10:05:38 Msec=750 True Az=135.045 Ze=-0.24 Az status=0009 Ze status=0009 10:05:38 Check angles 10:05:38 SkyScan query 10:05:39 SkyScan query done: ret=0 az=117.57<-7838 ze=20.7<-10620 Statuses=0009 0009 10:05:39 Msec=1500 True Az=117.57 Ze=20.7 Az status=0009 Ze status=0009 10:05:39 Check angles 10:05:39 SkyScan query 10:05:39 SkyScan query done: ret=0 az=100.17<-6678 ze=41.67<-9222 Statuses=0009 0009 10:05:39 Msec=2250 True Az=100.17 Ze=41.67 Az status=0009 Ze status=0009 10:05:40 Check angles 10:05:40 SkyScan query 10:05:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 10:05:40 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 10:05:40 Check angles 10:05:40 SkyScan query 10:05:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:05:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:05:41 Message to Master queued w/err=0: serial=7475 error=0 10:05:46 Received message from Master: op=Filter serial=7476 10:05:46 Color wheel filter change from 0 to 0 10:05:46 FLIGetFilterPos err=0 currentPosition=0 10:05:46 FLIGetStepsRemaining err=0 RemainingSteps=0 10:05:46 Filter is already there-color wheel unchanged 10:05:46 Received message from Master: op=Shutter serial=7477 10:05:46 Shutter LASER close 10:05:46 Received message from Camera: op=State serial=7479 10:05:46 GetSingleValue result=40 Value=cccccccc 10:05:46 SkyScan query 10:05:47 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:05:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:47 Parameters OK 10:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:47 Set A/D data flow result=40 10:05:47 Set A/D channel type result=40 10:05:47 Set A/D encoding result=40 10:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:47 Set channel filter=0.000000e+000 result=40 10:05:47 Config A/D Result=40 10:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:47 Get A/D filter: -9.255963e+061 result=40 10:05:47 Get A/D value=-858993460 result=40 10:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:05:47 Parameters OK 10:05:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:05:47 Set A/D data flow result=40 10:05:47 Set A/D channel type result=40 10:05:47 Set A/D encoding result=40 10:05:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:05:47 Set channel filter=0.000000e+000 result=40 10:05:47 Config A/D Result=40 10:05:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:05:47 Get A/D filter: -9.255963e+061 result=40 10:05:47 Get A/D value=-858993460 result=40 10:05:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:05:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:05:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:05:47 Aux= 10:05:47 Message to Camera, serial 7479 queued 10:06:18 Received message from Master: op=PointingHead serial=7486 10:06:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:06:18 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:06:18 Point started: ret=0 10:06:18 point_skyscan result=0 10:06:19 Check angles 10:06:19 SkyScan query 10:06:19 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 10:06:19 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 10:06:19 Check angles 10:06:19 SkyScan query 10:06:20 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 10:06:20 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 10:06:20 Check angles 10:06:20 SkyScan query 10:06:21 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 10:06:21 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 10:06:21 Check angles 10:06:21 SkyScan query 10:06:22 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 10:06:22 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 10:06:22 Check angles 10:06:22 SkyScan query 10:06:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:06:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:06:22 Check angles 10:06:22 SkyScan query 10:06:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:06:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:06:23 Message to Master queued w/err=0: serial=7486 error=0 10:06:28 Received message from Master: op=Filter serial=7487 10:06:28 Color wheel filter change from 0 to 0 10:06:28 FLIGetFilterPos err=0 currentPosition=0 10:06:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:06:28 Filter is already there-color wheel unchanged 10:06:28 Received message from Master: op=Shutter serial=7488 10:06:28 Shutter LASER close 10:06:28 Received message from Camera: op=State serial=7490 10:06:28 GetSingleValue result=40 Value=cccccccc 10:06:28 SkyScan query 10:06:29 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:06:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:29 Parameters OK 10:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:29 Set A/D data flow result=40 10:06:29 Set A/D channel type result=40 10:06:29 Set A/D encoding result=40 10:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:29 Set channel filter=0.000000e+000 result=40 10:06:29 Config A/D Result=40 10:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:29 Get A/D filter: -9.255963e+061 result=40 10:06:29 Get A/D value=-858993460 result=40 10:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:06:29 Parameters OK 10:06:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:06:29 Set A/D data flow result=40 10:06:29 Set A/D channel type result=40 10:06:29 Set A/D encoding result=40 10:06:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:06:29 Set channel filter=0.000000e+000 result=40 10:06:29 Config A/D Result=40 10:06:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:06:29 Get A/D filter: -9.255963e+061 result=40 10:06:29 Get A/D value=-858993460 result=40 10:06:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:06:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:06:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:06:29 Aux= 10:06:29 Message to Camera, serial 7490 queued 10:07:00 Received message from Master: op=PointingHead serial=7497 10:07:00 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:07:00 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:07:00 Point started: ret=0 10:07:00 point_skyscan result=0 10:07:01 Check angles 10:07:01 SkyScan query 10:07:01 SkyScan query done: ret=0 az=152.685<-10179 ze=8.205<-11453 Statuses=0009 0009 10:07:01 Msec=0 True Az=152.685 Ze=8.205 Az status=0009 Ze status=0009 10:07:02 Check angles 10:07:02 SkyScan query 10:07:02 SkyScan query done: ret=0 az=134.67<-8978 ze=-13.17<-12878 Statuses=0009 0009 10:07:02 Msec=750 True Az=134.67 Ze=-13.17 Az status=0009 Ze status=0009 10:07:02 Check angles 10:07:02 SkyScan query 10:07:03 SkyScan query done: ret=0 az=117.27<-7818 ze=-34.11<-14274 Statuses=0009 0009 10:07:03 Msec=1500 True Az=117.27 Ze=-34.11 Az status=0009 Ze status=0009 10:07:03 Check angles 10:07:03 SkyScan query 10:07:04 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.555<-15437 Statuses=0009 0009 10:07:04 Msec=2250 True Az=99.825 Ze=-51.555 Az status=0009 Ze status=0009 10:07:04 Check angles 10:07:04 SkyScan query 10:07:04 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:07:04 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:07:05 Check angles 10:07:05 SkyScan query 10:07:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:07:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:07:05 Message to Master queued w/err=0: serial=7497 error=0 10:07:10 Received message from Master: op=Filter serial=7498 10:07:10 Color wheel filter change from 0 to 0 10:07:10 FLIGetFilterPos err=0 currentPosition=0 10:07:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:10 Filter is already there-color wheel unchanged 10:07:10 Received message from Master: op=Shutter serial=7499 10:07:10 Shutter LASER close 10:07:10 Received message from Camera: op=State serial=7501 10:07:10 GetSingleValue result=40 Value=cccccccc 10:07:10 SkyScan query 10:07:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:07:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:11 Parameters OK 10:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:11 Set A/D data flow result=40 10:07:11 Set A/D channel type result=40 10:07:11 Set A/D encoding result=40 10:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:11 Set channel filter=0.000000e+000 result=40 10:07:11 Config A/D Result=40 10:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:11 Get A/D filter: -9.255963e+061 result=40 10:07:11 Get A/D value=-858993460 result=40 10:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:11 Parameters OK 10:07:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:11 Set A/D data flow result=40 10:07:11 Set A/D channel type result=40 10:07:11 Set A/D encoding result=40 10:07:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:11 Set channel filter=0.000000e+000 result=40 10:07:11 Config A/D Result=40 10:07:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:11 Get A/D filter: -9.255963e+061 result=40 10:07:11 Get A/D value=-858993460 result=40 10:07:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:11 Aux= 10:07:11 Message to Camera, serial 7501 queued 10:07:42 Received message from Master: op=PointingHead serial=7508 10:07:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:07:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:07:42 Point started: ret=0 10:07:42 point_skyscan result=0 10:07:43 Check angles 10:07:43 SkyScan query 10:07:43 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.375<-17425 Statuses=0009 0009 10:07:43 Msec=0 True Az=109.02 Ze=-81.375 Az status=0009 Ze status=0009 10:07:44 Check angles 10:07:44 SkyScan query 10:07:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.33<-18822 Statuses=0008 0009 10:07:44 Msec=750 True Az=112.995 Ze=-102.33 Az status=0008 Ze status=0009 10:07:44 Check angles 10:07:44 SkyScan query 10:07:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 10:07:45 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 10:07:45 Check angles 10:07:45 SkyScan query 10:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 10:07:46 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 10:07:46 Check angles 10:07:46 SkyScan query 10:07:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 10:07:46 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 10:07:47 Check angles 10:07:47 SkyScan query 10:07:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:07:47 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:07:47 Message to Master queued w/err=0: serial=7508 error=0 10:07:52 Received message from Master: op=Filter serial=7509 10:07:52 Color wheel filter change from 0 to 0 10:07:52 FLIGetFilterPos err=0 currentPosition=0 10:07:52 FLIGetStepsRemaining err=0 RemainingSteps=0 10:07:52 Filter is already there-color wheel unchanged 10:07:52 Received message from Master: op=Shutter serial=7510 10:07:52 Shutter LASER open 10:07:53 Received message from Camera: op=State serial=7512 10:07:53 GetSingleValue result=40 Value=cccccccc 10:07:53 SkyScan query 10:07:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:07:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:53 Parameters OK 10:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:53 Set A/D data flow result=40 10:07:53 Set A/D channel type result=40 10:07:53 Set A/D encoding result=40 10:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:53 Set channel filter=0.000000e+000 result=40 10:07:53 Config A/D Result=40 10:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:53 Get A/D filter: -9.255963e+061 result=40 10:07:53 Get A/D value=-858993460 result=40 10:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:07:53 Parameters OK 10:07:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:07:53 Set A/D data flow result=40 10:07:53 Set A/D channel type result=40 10:07:53 Set A/D encoding result=40 10:07:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:07:53 Set channel filter=0.000000e+000 result=40 10:07:53 Config A/D Result=40 10:07:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:07:53 Get A/D filter: -9.255963e+061 result=40 10:07:53 Get A/D value=-858993460 result=40 10:07:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:07:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:07:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:07:53 Aux= 10:07:53 Message to Camera, serial 7512 queued 10:07:56 Received message from Master: op=Shutter serial=7516 10:07:56 Shutter LASER close 10:07:56 Received message from Master: op=PointingHead serial=7520 10:07:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:07:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:07:56 Point started: ret=0 10:07:56 point_skyscan result=0 10:07:57 Check angles 10:07:57 SkyScan query 10:07:58 SkyScan query done: ret=0 az=89.37<-5958 ze=156.75<-1550 Statuses=0009 0009 10:07:58 Msec=0 True Az=89.37 Ze=156.75 Az status=0009 Ze status=0009 10:07:58 Check angles 10:07:58 SkyScan query 10:07:58 SkyScan query done: ret=0 az=71.4<-4760 ze=135.345<-2977 Statuses=0009 0009 10:07:58 Msec=750 True Az=71.4 Ze=135.345 Az status=0009 Ze status=0009 10:07:59 Check angles 10:07:59 SkyScan query 10:07:59 SkyScan query done: ret=0 az=54.36<-3624 ze=114.39<-4374 Statuses=0009 0009 10:07:59 Msec=1500 True Az=54.36 Ze=114.39 Az status=0009 Ze status=0009 10:07:59 Check angles 10:07:59 SkyScan query 10:08:00 SkyScan query done: ret=0 az=40.95<-2730 ze=93.465<-5769 Statuses=0009 0009 10:08:00 Msec=2250 True Az=40.95 Ze=93.465 Az status=0009 Ze status=0009 10:08:00 Check angles 10:08:00 SkyScan query 10:08:01 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 10:08:01 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 10:08:01 Check angles 10:08:01 SkyScan query 10:08:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 10:08:01 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 10:08:02 Check angles 10:08:02 SkyScan query 10:08:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:08:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:08:02 Message to Master queued w/err=0: serial=7520 error=0 10:08:07 Received message from Master: op=Filter serial=7521 10:08:07 Color wheel filter change from 0 to 0 10:08:07 FLIGetFilterPos err=0 currentPosition=0 10:08:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:07 Filter is already there-color wheel unchanged 10:08:07 Received message from Master: op=Shutter serial=7522 10:08:07 Shutter LASER close 10:08:08 Received message from Camera: op=State serial=7524 10:08:08 GetSingleValue result=40 Value=cccccccc 10:08:08 SkyScan query 10:08:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:08 Parameters OK 10:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:08 Set A/D data flow result=40 10:08:08 Set A/D channel type result=40 10:08:08 Set A/D encoding result=40 10:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:08 Set channel filter=0.000000e+000 result=40 10:08:08 Config A/D Result=40 10:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:08 Get A/D filter: -9.255963e+061 result=40 10:08:08 Get A/D value=-858993460 result=40 10:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:08 Parameters OK 10:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:08 Set A/D data flow result=40 10:08:08 Set A/D channel type result=40 10:08:08 Set A/D encoding result=40 10:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:08 Set channel filter=0.000000e+000 result=40 10:08:08 Config A/D Result=40 10:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:08 Get A/D filter: -9.255963e+061 result=40 10:08:08 Get A/D value=-858993460 result=40 10:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:08 Aux= 10:08:08 Message to Camera, serial 7524 queued 10:08:39 Received message from Master: op=PointingHead serial=7531 10:08:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:08:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:08:39 Point started: ret=0 10:08:39 point_skyscan result=0 10:08:40 Check angles 10:08:40 SkyScan query 10:08:41 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 10:08:41 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 10:08:41 Check angles 10:08:41 SkyScan query 10:08:41 SkyScan query done: ret=0 az=81.78<-5452 ze=66.495<-7567 Statuses=0009 0008 10:08:41 Msec=750 True Az=81.78 Ze=66.495 Az status=0009 Ze status=0008 10:08:42 Check angles 10:08:42 SkyScan query 10:08:42 SkyScan query done: ret=0 az=99.255<-6617 ze=66.495<-7567 Statuses=0009 0008 10:08:42 Msec=1500 True Az=99.255 Ze=66.495 Az status=0009 Ze status=0008 10:08:42 Check angles 10:08:42 SkyScan query 10:08:43 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 10:08:43 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 10:08:43 Check angles 10:08:43 SkyScan query 10:08:44 SkyScan query done: ret=0 az=134.865<-8991 ze=66.495<-7567 Statuses=0009 0008 10:08:44 Msec=3000 True Az=134.865 Ze=66.495 Az status=0009 Ze status=0008 10:08:44 Check angles 10:08:44 SkyScan query 10:08:44 SkyScan query done: ret=0 az=152.235<-10149 ze=66.495<-7567 Statuses=0009 0008 10:08:44 Msec=3750 True Az=152.235 Ze=66.495 Az status=0009 Ze status=0008 10:08:45 Check angles 10:08:45 SkyScan query 10:08:45 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:08:45 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:08:45 Message to Master queued w/err=0: serial=7531 error=0 10:08:50 Received message from Master: op=Filter serial=7532 10:08:50 Color wheel filter change from 0 to 0 10:08:50 FLIGetFilterPos err=0 currentPosition=0 10:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:08:50 Filter is already there-color wheel unchanged 10:08:50 Received message from Master: op=Shutter serial=7533 10:08:50 Shutter LASER close 10:08:50 Received message from Camera: op=State serial=7535 10:08:50 GetSingleValue result=40 Value=cccccccc 10:08:50 SkyScan query 10:08:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:51 Parameters OK 10:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:51 Set A/D data flow result=40 10:08:51 Set A/D channel type result=40 10:08:51 Set A/D encoding result=40 10:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:51 Set channel filter=0.000000e+000 result=40 10:08:51 Config A/D Result=40 10:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:51 Get A/D filter: -9.255963e+061 result=40 10:08:51 Get A/D value=-858993460 result=40 10:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:08:51 Parameters OK 10:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:08:51 Set A/D data flow result=40 10:08:51 Set A/D channel type result=40 10:08:51 Set A/D encoding result=40 10:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:08:51 Set channel filter=0.000000e+000 result=40 10:08:51 Config A/D Result=40 10:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:08:51 Get A/D filter: -9.255963e+061 result=40 10:08:51 Get A/D value=-858993460 result=40 10:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:08:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:08:51 Aux= 10:08:51 Message to Camera, serial 7535 queued 10:09:22 Received message from Master: op=PointingHead serial=7542 10:09:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:09:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:09:22 Point started: ret=0 10:09:22 point_skyscan result=0 10:09:23 Check angles 10:09:23 SkyScan query 10:09:24 SkyScan query done: ret=0 az=134.64<-8976 ze=36.585<-9561 Statuses=0009 0009 10:09:24 Msec=0 True Az=134.64 Ze=36.585 Az status=0009 Ze status=0009 10:09:24 Check angles 10:09:24 SkyScan query 10:09:24 SkyScan query done: ret=0 az=117.09<-7806 ze=15.645<-10957 Statuses=0009 0009 10:09:24 Msec=750 True Az=117.09 Ze=15.645 Az status=0009 Ze status=0009 10:09:24 Check angles [UTC 2018-12-4 10:09:24] 10:09:24 SkyScan query 10:09:25 SkyScan query done: ret=0 az=98.175<-6545 ze=-7.065<-12471 Statuses=0009 0009 10:09:25 Msec=1500 True Az=98.175 Ze=-7.065 Az status=0009 Ze status=0009 10:09:25 Check angles 10:09:25 SkyScan query 10:09:26 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.295<-13753 Statuses=0009 0009 10:09:26 Msec=2250 True Az=82.23 Ze=-26.295 Az status=0009 Ze status=0009 10:09:26 Check angles 10:09:26 SkyScan query 10:09:27 SkyScan query done: ret=0 az=64.815<-4321 ze=-38.565<-14571 Statuses=0009 0008 10:09:27 Msec=3000 True Az=64.815 Ze=-38.565 Az status=0009 Ze status=0008 10:09:27 Check angles 10:09:27 SkyScan query 10:09:27 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.535<-14569 Statuses=0009 0008 10:09:27 Msec=3750 True Az=47.43 Ze=-38.535 Az status=0009 Ze status=0008 10:09:27 Check angles 10:09:27 SkyScan query 10:09:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:09:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:09:28 Message to Master queued w/err=0: serial=7542 error=0 10:09:33 Received message from Master: op=Filter serial=7543 10:09:33 Color wheel filter change from 0 to 0 10:09:33 FLIGetFilterPos err=0 currentPosition=0 10:09:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:09:33 Filter is already there-color wheel unchanged 10:09:33 Received message from Master: op=Shutter serial=7544 10:09:33 Shutter LASER close 10:09:33 Received message from Camera: op=State serial=7546 10:09:33 GetSingleValue result=40 Value=cccccccc 10:09:33 SkyScan query 10:09:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:09:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:34 Parameters OK 10:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:34 Set A/D data flow result=40 10:09:34 Set A/D channel type result=40 10:09:34 Set A/D encoding result=40 10:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:34 Set channel filter=0.000000e+000 result=40 10:09:34 Config A/D Result=40 10:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:34 Get A/D filter: -9.255963e+061 result=40 10:09:34 Get A/D value=-858993460 result=40 10:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:09:34 Parameters OK 10:09:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:09:34 Set A/D data flow result=40 10:09:34 Set A/D channel type result=40 10:09:34 Set A/D encoding result=40 10:09:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:09:34 Set channel filter=0.000000e+000 result=40 10:09:34 Config A/D Result=40 10:09:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:09:34 Get A/D filter: -9.255963e+061 result=40 10:09:34 Get A/D value=-858993460 result=40 10:09:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:09:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:09:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:09:34 Aux= 10:09:34 Message to Camera, serial 7546 queued 10:10:05 Received message from Master: op=PointingHead serial=7553 10:10:05 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:10:05 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:10:05 Point started: ret=0 10:10:05 point_skyscan result=0 10:10:06 Check angles 10:10:06 SkyScan query 10:10:06 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.115<-16541 Statuses=0009 0009 10:10:06 Msec=0 True Az=63.795 Ze=-68.115 Az status=0009 Ze status=0009 10:10:07 Check angles 10:10:07 SkyScan query 10:10:07 SkyScan query done: ret=0 az=81.225<-5415 ze=-89.07<-17938 Statuses=0009 0009 10:10:07 Msec=750 True Az=81.225 Ze=-89.07 Az status=0009 Ze status=0009 10:10:07 Check angles 10:10:07 SkyScan query 10:10:08 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.01<-19334 Statuses=0009 0009 10:10:08 Msec=1500 True Az=98.955 Ze=-110.01 Az status=0009 Ze status=0009 10:10:08 Check angles 10:10:08 SkyScan query 10:10:09 SkyScan query done: ret=0 az=116.295<-7753 ze=-130.965<-20731 Statuses=0009 0009 10:10:09 Msec=2250 True Az=116.295 Ze=-130.965 Az status=0009 Ze status=0009 10:10:09 Check angles 10:10:09 SkyScan query 10:10:09 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 10:10:09 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 10:10:10 Check angles 10:10:10 SkyScan query 10:10:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:10:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:10:10 Message to Master queued w/err=0: serial=7553 error=0 10:10:15 Received message from Master: op=Filter serial=7554 10:10:15 Color wheel filter change from 0 to 0 10:10:15 FLIGetFilterPos err=0 currentPosition=0 10:10:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:15 Filter is already there-color wheel unchanged 10:10:15 Received message from Master: op=Shutter serial=7555 10:10:15 Shutter LASER close 10:10:15 Received message from Camera: op=State serial=7557 10:10:15 GetSingleValue result=40 Value=cccccccc 10:10:15 SkyScan query 10:10:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:10:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:16 Parameters OK 10:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:16 Set A/D data flow result=40 10:10:16 Set A/D channel type result=40 10:10:16 Set A/D encoding result=40 10:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:16 Set channel filter=0.000000e+000 result=40 10:10:16 Config A/D Result=40 10:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:16 Get A/D filter: -9.255963e+061 result=40 10:10:16 Get A/D value=-858993460 result=40 10:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:16 Parameters OK 10:10:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:16 Set A/D data flow result=40 10:10:16 Set A/D channel type result=40 10:10:16 Set A/D encoding result=40 10:10:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:16 Set channel filter=0.000000e+000 result=40 10:10:16 Config A/D Result=40 10:10:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:16 Get A/D filter: -9.255963e+061 result=40 10:10:16 Get A/D value=-858993460 result=40 10:10:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:16 Aux= 10:10:16 Message to Camera, serial 7557 queued 10:10:47 Received message from Master: op=PointingHead serial=7564 10:10:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:10:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:10:47 Point started: ret=0 10:10:47 point_skyscan result=0 10:10:48 Check angles 10:10:48 SkyScan query 10:10:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.525<-23435 Statuses=0009 0009 10:10:49 Msec=0 True Az=113.01 Ze=-171.525 Az status=0009 Ze status=0009 10:10:49 Check angles 10:10:49 SkyScan query 10:10:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:10:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:10:49 Message to Master queued w/err=0: serial=7564 error=0 10:10:54 Received message from Master: op=Filter serial=7565 10:10:54 Color wheel filter change from 0 to 0 10:10:54 FLIGetFilterPos err=0 currentPosition=0 10:10:54 FLIGetStepsRemaining err=0 RemainingSteps=0 10:10:54 Filter is already there-color wheel unchanged 10:10:54 Received message from Master: op=Shutter serial=7566 10:10:54 Shutter LASER open 10:10:55 Received message from Camera: op=State serial=7568 10:10:55 GetSingleValue result=40 Value=cccccccc 10:10:55 SkyScan query 10:10:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:10:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:55 Parameters OK 10:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:55 Set A/D data flow result=40 10:10:55 Set A/D channel type result=40 10:10:55 Set A/D encoding result=40 10:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:55 Set channel filter=0.000000e+000 result=40 10:10:55 Config A/D Result=40 10:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:55 Get A/D filter: -9.255963e+061 result=40 10:10:55 Get A/D value=-858993460 result=40 10:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:10:55 Parameters OK 10:10:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:10:55 Set A/D data flow result=40 10:10:55 Set A/D channel type result=40 10:10:55 Set A/D encoding result=40 10:10:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:10:55 Set channel filter=0.000000e+000 result=40 10:10:55 Config A/D Result=40 10:10:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:10:55 Get A/D filter: -9.255963e+061 result=40 10:10:55 Get A/D value=-858993460 result=40 10:10:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:10:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:10:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:10:55 Aux= 10:10:55 Message to Camera, serial 7568 queued 10:10:58 Received message from Master: op=Shutter serial=7572 10:10:58 Shutter LASER close 10:10:58 Received message from Master: op=PointingHead serial=7576 10:10:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:10:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:10:59 Point started: ret=0 10:10:59 point_skyscan result=0 10:10:59 Check angles 10:10:59 SkyScan query 10:11:00 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.175<-21545 Statuses=0009 0009 10:11:00 Msec=0 True Az=135.975 Ze=-143.175 Az status=0009 Ze status=0009 10:11:00 Check angles 10:11:00 SkyScan query 10:11:01 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.22<-20148 Statuses=0009 0009 10:11:01 Msec=750 True Az=153.615 Ze=-122.22 Az status=0009 Ze status=0009 10:11:01 Check angles 10:11:01 SkyScan query 10:11:01 SkyScan query done: ret=0 az=170.94<-11396 ze=-101.28<-18752 Statuses=0009 0009 10:11:01 Msec=1500 True Az=170.94 Ze=-101.28 Az status=0009 Ze status=0009 10:11:02 Check angles 10:11:02 SkyScan query 10:11:02 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.325<-17355 Statuses=0008 0009 10:11:02 Msec=2250 True Az=176.025 Ze=-80.325 Az status=0008 Ze status=0009 10:11:02 Check angles 10:11:02 SkyScan query 10:11:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.355<-15957 Statuses=0008 0009 10:11:03 Msec=3000 True Az=175.995 Ze=-59.355 Az status=0008 Ze status=0009 10:11:03 Check angles 10:11:03 SkyScan query 10:11:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:11:04 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:11:04 Message to Master queued w/err=0: serial=7576 error=0 10:11:09 Received message from Master: op=Filter serial=7577 10:11:09 Color wheel filter change from 0 to 0 10:11:09 FLIGetFilterPos err=0 currentPosition=0 10:11:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:09 Filter is already there-color wheel unchanged 10:11:09 Received message from Master: op=Shutter serial=7578 10:11:09 Shutter LASER close 10:11:09 Received message from Camera: op=State serial=7580 10:11:09 GetSingleValue result=40 Value=cccccccc 10:11:09 SkyScan query 10:11:10 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:11:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:10 Parameters OK 10:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:10 Set A/D data flow result=40 10:11:10 Set A/D channel type result=40 10:11:10 Set A/D encoding result=40 10:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:10 Set channel filter=0.000000e+000 result=40 10:11:10 Config A/D Result=40 10:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:10 Get A/D filter: -9.255963e+061 result=40 10:11:10 Get A/D value=-858993460 result=40 10:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:10 Parameters OK 10:11:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:10 Set A/D data flow result=40 10:11:10 Set A/D channel type result=40 10:11:10 Set A/D encoding result=40 10:11:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:10 Set channel filter=0.000000e+000 result=40 10:11:10 Config A/D Result=40 10:11:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:10 Get A/D filter: -9.255963e+061 result=40 10:11:10 Get A/D value=-858993460 result=40 10:11:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:10 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:10 Aux= 10:11:10 Message to Camera, serial 7580 queued 10:11:40 Received message from Master: op=PointingHead serial=7587 10:11:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:11:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:11:41 Point started: ret=0 10:11:41 point_skyscan result=0 10:11:42 Check angles 10:11:42 SkyScan query 10:11:42 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.69<-13446 Statuses=0009 0009 10:11:42 Msec=0 True Az=152.91 Ze=-21.69 Az status=0009 Ze status=0009 10:11:42 Check angles 10:11:42 SkyScan query 10:11:43 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.285<-12019 Statuses=0009 0009 10:11:43 Msec=750 True Az=135.105 Ze=-0.285 Az status=0009 Ze status=0009 10:11:43 Check angles 10:11:43 SkyScan query 10:11:44 SkyScan query done: ret=0 az=117.225<-7815 ze=21.09<-10594 Statuses=0009 0009 10:11:44 Msec=1500 True Az=117.225 Ze=21.09 Az status=0009 Ze status=0009 10:11:44 Check angles 10:11:44 SkyScan query 10:11:44 SkyScan query done: ret=0 az=99.825<-6655 ze=42.06<-9196 Statuses=0009 0009 10:11:44 Msec=2250 True Az=99.825 Ze=42.06 Az status=0009 Ze status=0009 10:11:45 Check angles 10:11:45 SkyScan query 10:11:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 10:11:45 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 10:11:45 Check angles 10:11:45 SkyScan query 10:11:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:11:46 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 10:11:46 Message to Master queued w/err=0: serial=7587 error=0 10:11:51 Received message from Master: op=Filter serial=7588 10:11:51 Color wheel filter change from 0 to 0 10:11:51 FLIGetFilterPos err=0 currentPosition=0 10:11:51 FLIGetStepsRemaining err=0 RemainingSteps=0 10:11:51 Filter is already there-color wheel unchanged 10:11:51 Received message from Master: op=Shutter serial=7589 10:11:51 Shutter LASER close 10:11:51 Received message from Camera: op=State serial=7591 10:11:51 GetSingleValue result=40 Value=cccccccc 10:11:51 SkyScan query 10:11:52 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:11:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:52 Parameters OK 10:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:52 Set A/D data flow result=40 10:11:52 Set A/D channel type result=40 10:11:52 Set A/D encoding result=40 10:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:52 Set channel filter=0.000000e+000 result=40 10:11:52 Config A/D Result=40 10:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:52 Get A/D filter: -9.255963e+061 result=40 10:11:52 Get A/D value=-858993460 result=40 10:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:11:52 Parameters OK 10:11:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:11:52 Set A/D data flow result=40 10:11:52 Set A/D channel type result=40 10:11:52 Set A/D encoding result=40 10:11:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:11:52 Set channel filter=0.000000e+000 result=40 10:11:52 Config A/D Result=40 10:11:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:11:52 Get A/D filter: -9.255963e+061 result=40 10:11:52 Get A/D value=-858993460 result=40 10:11:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:11:52 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:11:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:11:52 Aux= 10:11:52 Message to Camera, serial 7591 queued [UTC 2018-12-4 10:12:09] 10:12:23 Received message from Master: op=PointingHead serial=7598 10:12:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:12:23 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:12:23 Point started: ret=0 10:12:23 point_skyscan result=0 10:12:24 Check angles 10:12:24 SkyScan query 10:12:24 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 10:12:24 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 10:12:24 Check angles 10:12:24 SkyScan query 10:12:25 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 10:12:25 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 10:12:25 Check angles 10:12:25 SkyScan query 10:12:26 SkyScan query done: ret=0 az=144.375<-9625 ze=38.505<-9433 Statuses=0009 0008 10:12:26 Msec=1500 True Az=144.375 Ze=38.505 Az status=0009 Ze status=0008 10:12:26 Check angles 10:12:26 SkyScan query 10:12:26 SkyScan query done: ret=0 az=161.775<-10785 ze=38.505<-9433 Statuses=0009 0008 10:12:26 Msec=2250 True Az=161.775 Ze=38.505 Az status=0009 Ze status=0008 10:12:27 Check angles 10:12:27 SkyScan query 10:12:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:12:27 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:12:27 Check angles 10:12:27 SkyScan query 10:12:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:12:28 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:12:28 Message to Master queued w/err=0: serial=7598 error=0 10:12:33 Received message from Master: op=Filter serial=7599 10:12:33 Color wheel filter change from 0 to 0 10:12:33 FLIGetFilterPos err=0 currentPosition=0 10:12:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:12:33 Filter is already there-color wheel unchanged 10:12:33 Received message from Master: op=Shutter serial=7600 10:12:33 Shutter LASER close 10:12:33 Received message from Camera: op=State serial=7602 10:12:33 GetSingleValue result=40 Value=cccccccc 10:12:33 SkyScan query 10:12:34 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:12:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:34 Parameters OK 10:12:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:34 Set A/D data flow result=40 10:12:34 Set A/D channel type result=40 10:12:34 Set A/D encoding result=40 10:12:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:34 Set channel filter=0.000000e+000 result=40 10:12:34 Config A/D Result=40 10:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:34 Get A/D filter: -9.255963e+061 result=40 10:12:34 Get A/D value=-858993460 result=40 10:12:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:12:34 Parameters OK 10:12:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:12:34 Set A/D data flow result=40 10:12:34 Set A/D channel type result=40 10:12:34 Set A/D encoding result=40 10:12:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:12:34 Set channel filter=0.000000e+000 result=40 10:12:34 Config A/D Result=40 10:12:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:12:34 Get A/D filter: -9.255963e+061 result=40 10:12:34 Get A/D value=-858993460 result=40 10:12:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:12:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:12:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:12:34 Aux= 10:12:34 Message to Camera, serial 7602 queued 10:13:05 Received message from Master: op=PointingHead serial=7609 10:13:05 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:13:05 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:13:05 Point started: ret=0 10:13:05 point_skyscan result=0 10:13:06 Check angles 10:13:06 SkyScan query 10:13:06 SkyScan query done: ret=0 az=152.97<-10198 ze=8.64<-11424 Statuses=0009 0009 10:13:06 Msec=0 True Az=152.97 Ze=8.64 Az status=0009 Ze status=0009 10:13:06 Check angles 10:13:06 SkyScan query 10:13:07 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.225<-12815 Statuses=0009 0009 10:13:07 Msec=750 True Az=135.615 Ze=-12.225 Az status=0009 Ze status=0009 10:13:07 Check angles 10:13:07 SkyScan query 10:13:08 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.165<-14211 Statuses=0009 0009 10:13:08 Msec=1500 True Az=118.08 Ze=-33.165 Az status=0009 Ze status=0009 10:13:08 Check angles 10:13:08 SkyScan query 10:13:09 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.54<-15436 Statuses=0009 0009 10:13:09 Msec=2250 True Az=100.245 Ze=-51.54 Az status=0009 Ze status=0009 10:13:09 Check angles 10:13:09 SkyScan query 10:13:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:13:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:13:10 Check angles 10:13:10 SkyScan query 10:13:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 10:13:10 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 10:13:10 Message to Master queued w/err=0: serial=7609 error=0 10:13:15 Received message from Master: op=Filter serial=7610 10:13:15 Color wheel filter change from 0 to 0 10:13:15 FLIGetFilterPos err=0 currentPosition=0 10:13:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:15 Filter is already there-color wheel unchanged 10:13:15 Received message from Master: op=Shutter serial=7611 10:13:15 Shutter LASER close 10:13:15 Received message from Camera: op=State serial=7613 10:13:15 GetSingleValue result=40 Value=cccccccc 10:13:15 SkyScan query 10:13:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:13:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:16 Parameters OK 10:13:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:16 Set A/D data flow result=40 10:13:16 Set A/D channel type result=40 10:13:16 Set A/D encoding result=40 10:13:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:16 Set channel filter=0.000000e+000 result=40 10:13:16 Config A/D Result=40 10:13:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:16 Get A/D filter: -9.255963e+061 result=40 10:13:16 Get A/D value=-858993460 result=40 10:13:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:16 Parameters OK 10:13:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:16 Set A/D data flow result=40 10:13:16 Set A/D channel type result=40 10:13:16 Set A/D encoding result=40 10:13:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:16 Set channel filter=0.000000e+000 result=40 10:13:16 Config A/D Result=40 10:13:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:16 Get A/D filter: -9.255963e+061 result=40 10:13:16 Get A/D value=-858993460 result=40 10:13:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:16 Aux= 10:13:16 Message to Camera, serial 7613 queued 10:13:47 Received message from Master: op=PointingHead serial=7620 10:13:47 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:13:47 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:13:47 Point started: ret=0 10:13:47 point_skyscan result=0 10:13:48 Check angles 10:13:48 SkyScan query 10:13:48 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.42<-17428 Statuses=0009 0009 10:13:48 Msec=0 True Az=109.185 Ze=-81.42 Az status=0009 Ze status=0009 10:13:49 Check angles 10:13:49 SkyScan query 10:13:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 10:13:49 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 10:13:49 Check angles 10:13:49 SkyScan query 10:13:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.315<-20221 Statuses=0008 0009 10:13:50 Msec=1500 True Az=112.995 Ze=-123.315 Az status=0008 Ze status=0009 10:13:50 Check angles 10:13:50 SkyScan query 10:13:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.27<-21618 Statuses=0008 0009 10:13:51 Msec=2250 True Az=112.995 Ze=-144.27 Az status=0008 Ze status=0009 10:13:51 Check angles 10:13:51 SkyScan query 10:13:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 10:13:51 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 10:13:52 Check angles 10:13:52 SkyScan query 10:13:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:13:52 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:13:52 Message to Master queued w/err=0: serial=7620 error=0 10:13:57 Received message from Master: op=Filter serial=7621 10:13:57 Color wheel filter change from 0 to 0 10:13:57 FLIGetFilterPos err=0 currentPosition=0 10:13:57 FLIGetStepsRemaining err=0 RemainingSteps=0 10:13:57 Filter is already there-color wheel unchanged 10:13:57 Received message from Master: op=Shutter serial=7622 10:13:57 Shutter LASER open 10:13:58 Received message from Camera: op=State serial=7624 10:13:58 GetSingleValue result=40 Value=cccccccc 10:13:58 SkyScan query 10:13:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:13:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:58 Parameters OK 10:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:58 Set A/D data flow result=40 10:13:58 Set A/D channel type result=40 10:13:58 Set A/D encoding result=40 10:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:58 Set channel filter=0.000000e+000 result=40 10:13:58 Config A/D Result=40 10:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:58 Get A/D filter: -9.255963e+061 result=40 10:13:58 Get A/D value=-858993460 result=40 10:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:13:58 Parameters OK 10:13:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:13:58 Set A/D data flow result=40 10:13:58 Set A/D channel type result=40 10:13:58 Set A/D encoding result=40 10:13:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:13:58 Set channel filter=0.000000e+000 result=40 10:13:58 Config A/D Result=40 10:13:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:13:58 Get A/D filter: -9.255963e+061 result=40 10:13:58 Get A/D value=-858993460 result=40 10:13:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:13:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:13:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:13:58 Aux= 10:13:58 Message to Camera, serial 7624 queued 10:14:01 Received message from Master: op=Shutter serial=7628 10:14:01 Shutter LASER close 10:14:01 Received message from Master: op=PointingHead serial=7632 10:14:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:14:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:14:01 Point started: ret=0 10:14:01 point_skyscan result=0 10:14:02 Check angles 10:14:02 SkyScan query 10:14:03 SkyScan query done: ret=0 az=89.685<-5979 ze=156.99<-1534 Statuses=0009 0009 10:14:03 Msec=0 True Az=89.685 Ze=156.99 Az status=0009 Ze status=0009 10:14:03 Check angles 10:14:03 SkyScan query 10:14:03 SkyScan query done: ret=0 az=72.12<-4808 ze=136.02<-2932 Statuses=0009 0009 10:14:03 Msec=750 True Az=72.12 Ze=136.02 Az status=0009 Ze status=0009 10:14:04 Check angles 10:14:04 SkyScan query 10:14:04 SkyScan query done: ret=0 az=54.81<-3654 ze=115.095<-4327 Statuses=0009 0009 10:14:04 Msec=1500 True Az=54.81 Ze=115.095 Az status=0009 Ze status=0009 10:14:04 Check angles 10:14:04 SkyScan query 10:14:05 SkyScan query done: ret=0 az=40.905<-2727 ze=93.675<-5755 Statuses=0009 0009 10:14:05 Msec=2250 True Az=40.905 Ze=93.675 Az status=0009 Ze status=0009 10:14:05 Check angles 10:14:05 SkyScan query 10:14:06 SkyScan query done: ret=0 az=41.01<-2734 ze=72.72<-7152 Statuses=0008 0009 10:14:06 Msec=3000 True Az=41.01 Ze=72.72 Az status=0008 Ze status=0009 10:14:06 Check angles 10:14:06 SkyScan query 10:14:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 10:14:06 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 10:14:07 Check angles 10:14:07 SkyScan query 10:14:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:14:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:14:07 Message to Master queued w/err=0: serial=7632 error=0 10:14:12 Received message from Master: op=Filter serial=7633 10:14:12 Color wheel filter change from 0 to 0 10:14:12 FLIGetFilterPos err=0 currentPosition=0 10:14:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:12 Filter is already there-color wheel unchanged 10:14:12 Received message from Master: op=Shutter serial=7634 10:14:12 Shutter LASER close 10:14:13 Received message from Camera: op=State serial=7636 10:14:13 GetSingleValue result=40 Value=cccccccc 10:14:13 SkyScan query 10:14:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:14:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:13 Parameters OK 10:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:13 Set A/D data flow result=40 10:14:13 Set A/D channel type result=40 10:14:13 Set A/D encoding result=40 10:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:13 Set channel filter=0.000000e+000 result=40 10:14:13 Config A/D Result=40 10:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:13 Get A/D filter: -9.255963e+061 result=40 10:14:13 Get A/D value=-858993460 result=40 10:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:13 Parameters OK 10:14:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:13 Set A/D data flow result=40 10:14:13 Set A/D channel type result=40 10:14:13 Set A/D encoding result=40 10:14:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:13 Set channel filter=0.000000e+000 result=40 10:14:13 Config A/D Result=40 10:14:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:13 Get A/D filter: -9.255963e+061 result=40 10:14:13 Get A/D value=-858993460 result=40 10:14:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:13 Aux= 10:14:13 Message to Camera, serial 7636 queued 10:14:44 Received message from Master: op=PointingHead serial=7643 10:14:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:14:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:14:44 Point started: ret=0 10:14:44 point_skyscan result=0 10:14:45 Check angles 10:14:45 SkyScan query 10:14:46 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 10:14:46 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 10:14:46 Check angles 10:14:46 SkyScan query 10:14:46 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 10:14:46 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 10:14:47 Check angles 10:14:47 SkyScan query 10:14:47 SkyScan query done: ret=0 az=99.255<-6617 ze=66.495<-7567 Statuses=0009 0008 10:14:47 Msec=1500 True Az=99.255 Ze=66.495 Az status=0009 Ze status=0008 10:14:47 Check angles 10:14:47 SkyScan query 10:14:48 SkyScan query done: ret=0 az=116.76<-7784 ze=66.495<-7567 Statuses=0009 0008 10:14:48 Msec=2250 True Az=116.76 Ze=66.495 Az status=0009 Ze status=0008 10:14:48 Check angles 10:14:48 SkyScan query 10:14:49 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 10:14:49 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 10:14:49 Check angles 10:14:49 SkyScan query 10:14:49 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 10:14:49 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 10:14:50 Check angles 10:14:50 SkyScan query 10:14:50 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:14:50 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:14:50 Message to Master queued w/err=0: serial=7643 error=0 10:14:55 Received message from Master: op=Filter serial=7644 10:14:55 Color wheel filter change from 0 to 0 10:14:55 FLIGetFilterPos err=0 currentPosition=0 10:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:14:55 Filter is already there-color wheel unchanged 10:14:55 Received message from Master: op=Shutter serial=7645 10:14:55 Shutter LASER close 10:14:55 Received message from Camera: op=State serial=7647 10:14:55 GetSingleValue result=40 Value=cccccccc 10:14:55 SkyScan query 10:14:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:56 Parameters OK 10:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:56 Set A/D data flow result=40 10:14:56 Set A/D channel type result=40 10:14:56 Set A/D encoding result=40 10:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:56 Set channel filter=0.000000e+000 result=40 10:14:56 Config A/D Result=40 10:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:56 Get A/D filter: -9.255963e+061 result=40 10:14:56 Get A/D value=-858993460 result=40 10:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:14:56 Parameters OK 10:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:14:56 Set A/D data flow result=40 10:14:56 Set A/D channel type result=40 10:14:56 Set A/D encoding result=40 10:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:14:56 Set channel filter=0.000000e+000 result=40 10:14:56 Config A/D Result=40 10:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:14:56 Get A/D filter: -9.255963e+061 result=40 10:14:56 Get A/D value=-858993460 result=40 10:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:14:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:14:56 Aux= 10:14:56 Message to Camera, serial 7647 queued 10:15:27 Received message from Master: op=PointingHead serial=7654 10:15:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:15:27 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:15:27 Point started: ret=0 10:15:27 point_skyscan result=0 10:15:28 Check angles 10:15:28 SkyScan query 10:15:29 SkyScan query done: ret=0 az=134.865<-8991 ze=36.765<-9549 Statuses=0009 0009 10:15:29 Msec=0 True Az=134.865 Ze=36.765 Az status=0009 Ze status=0009 10:15:29 Check angles 10:15:29 SkyScan query 10:15:29 SkyScan query done: ret=0 az=117.315<-7821 ze=15.78<-10948 Statuses=0009 0009 10:15:29 Msec=750 True Az=117.315 Ze=15.78 Az status=0009 Ze status=0009 10:15:29 Check angles 10:15:29 SkyScan query 10:15:30 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.175<-12345 Statuses=0009 0009 10:15:30 Msec=1500 True Az=99.915 Ze=-5.175 Az status=0009 Ze status=0009 10:15:30 Check angles 10:15:30 SkyScan query 10:15:31 SkyScan query done: ret=0 az=82.485<-5499 ze=-26.145<-13743 Statuses=0009 0009 10:15:31 Msec=2250 True Az=82.485 Ze=-26.145 Az status=0009 Ze status=0009 10:15:31 Check angles 10:15:31 SkyScan query 10:15:32 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 10:15:32 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 10:15:32 Check angles 10:15:32 SkyScan query 10:15:32 SkyScan query done: ret=0 az=47.565<-3171 ze=-38.535<-14569 Statuses=0009 0008 10:15:32 Msec=3750 True Az=47.565 Ze=-38.535 Az status=0009 Ze status=0008 10:15:32 Check angles 10:15:32 SkyScan query 10:15:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:15:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:15:33 Message to Master queued w/err=0: serial=7654 error=0 10:15:38 Received message from Master: op=Filter serial=7655 10:15:38 Color wheel filter change from 0 to 0 10:15:38 FLIGetFilterPos err=0 currentPosition=0 10:15:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:15:38 Filter is already there-color wheel unchanged 10:15:38 Received message from Master: op=Shutter serial=7656 10:15:38 Shutter LASER close 10:15:38 Received message from Camera: op=State serial=7658 10:15:38 GetSingleValue result=40 Value=cccccccc 10:15:38 SkyScan query 10:15:39 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:15:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:39 Parameters OK 10:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:39 Set A/D data flow result=40 10:15:39 Set A/D channel type result=40 10:15:39 Set A/D encoding result=40 10:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:39 Set channel filter=0.000000e+000 result=40 10:15:39 Config A/D Result=40 10:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:39 Get A/D filter: -9.255963e+061 result=40 10:15:39 Get A/D value=-858993460 result=40 10:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:15:39 Parameters OK 10:15:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:15:39 Set A/D data flow result=40 10:15:39 Set A/D channel type result=40 10:15:39 Set A/D encoding result=40 10:15:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:15:39 Set channel filter=0.000000e+000 result=40 10:15:39 Config A/D Result=40 10:15:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:15:39 Get A/D filter: -9.255963e+061 result=40 10:15:39 Get A/D value=-858993460 result=40 10:15:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:15:39 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:15:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:15:39 Aux= 10:15:39 Message to Camera, serial 7658 queued 10:16:10 Received message from Master: op=PointingHead serial=7665 10:16:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:16:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:16:10 Point started: ret=0 10:16:10 point_skyscan result=0 10:16:11 Check angles 10:16:11 SkyScan query 10:16:11 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.1<-16540 Statuses=0009 0009 10:16:11 Msec=0 True Az=63.795 Ze=-68.1 Az status=0009 Ze status=0009 10:16:12 Check angles 10:16:12 SkyScan query 10:16:12 SkyScan query done: ret=0 az=81.315<-5421 ze=-89.07<-17938 Statuses=0009 0009 10:16:12 Msec=750 True Az=81.315 Ze=-89.07 Az status=0009 Ze status=0009 10:16:12 Check angles 10:16:12 SkyScan query 10:16:13 SkyScan query done: ret=0 az=98.94<-6596 ze=-109.98<-19332 Statuses=0009 0009 10:16:13 Msec=1500 True Az=98.94 Ze=-109.98 Az status=0009 Ze status=0009 10:16:13 Check angles 10:16:13 SkyScan query 10:16:14 SkyScan query done: ret=0 az=116.295<-7753 ze=-130.95<-20730 Statuses=0009 0009 10:16:14 Msec=2250 True Az=116.295 Ze=-130.95 Az status=0009 Ze status=0009 10:16:14 Check angles 10:16:14 SkyScan query 10:16:14 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 10:16:14 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 10:16:15 Check angles 10:16:15 SkyScan query 10:16:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:16:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:16:15 Message to Master queued w/err=0: serial=7665 error=0 10:16:20 Received message from Master: op=Filter serial=7666 10:16:20 Color wheel filter change from 0 to 0 10:16:20 FLIGetFilterPos err=0 currentPosition=0 10:16:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:20 Filter is already there-color wheel unchanged 10:16:20 Received message from Master: op=Shutter serial=7667 10:16:20 Shutter LASER close 10:16:20 Received message from Camera: op=State serial=7669 10:16:20 GetSingleValue result=40 Value=cccccccc 10:16:20 SkyScan query 10:16:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:16:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:21 Parameters OK 10:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:21 Set A/D data flow result=40 10:16:21 Set A/D channel type result=40 10:16:21 Set A/D encoding result=40 10:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:21 Set channel filter=0.000000e+000 result=40 10:16:21 Config A/D Result=40 10:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:21 Get A/D filter: -9.255963e+061 result=40 10:16:21 Get A/D value=-858993460 result=40 10:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:16:21 Parameters OK 10:16:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:16:21 Set A/D data flow result=40 10:16:21 Set A/D channel type result=40 10:16:21 Set A/D encoding result=40 10:16:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:16:21 Set channel filter=0.000000e+000 result=40 10:16:21 Config A/D Result=40 10:16:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:16:21 Get A/D filter: -9.255963e+061 result=40 10:16:21 Get A/D value=-858993460 result=40 10:16:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:16:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:16:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:16:21 Aux= 10:16:21 Message to Camera, serial 7669 queued 10:16:52 Received message from Master: op=PointingHead serial=7676 10:16:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:16:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:16:52 Point started: ret=0 10:16:52 point_skyscan result=0 10:16:53 Check angles 10:16:53 SkyScan query 10:16:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0009 0009 10:16:53 Msec=0 True Az=113.01 Ze=-171.495 Az status=0009 Ze status=0009 10:16:54 Check angles 10:16:54 SkyScan query 10:16:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:16:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:16:54 Message to Master queued w/err=0: serial=7676 error=0 10:16:59 Received message from Master: op=Filter serial=7677 10:16:59 Color wheel filter change from 0 to 0 10:16:59 FLIGetFilterPos err=0 currentPosition=0 10:16:59 FLIGetStepsRemaining err=0 RemainingSteps=0 10:16:59 Filter is already there-color wheel unchanged 10:16:59 Received message from Master: op=Shutter serial=7678 10:16:59 Shutter LASER open 10:17:00 Received message from Camera: op=State serial=7680 10:17:00 GetSingleValue result=40 Value=cccccccc 10:17:00 SkyScan query 10:17:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:00 Parameters OK 10:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:00 Set A/D data flow result=40 10:17:00 Set A/D channel type result=40 10:17:00 Set A/D encoding result=40 10:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:00 Set channel filter=0.000000e+000 result=40 10:17:00 Config A/D Result=40 10:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:00 Get A/D filter: -9.255963e+061 result=40 10:17:00 Get A/D value=-858993460 result=40 10:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:00 Parameters OK 10:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:00 Set A/D data flow result=40 10:17:00 Set A/D channel type result=40 10:17:00 Set A/D encoding result=40 10:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:00 Set channel filter=0.000000e+000 result=40 10:17:00 Config A/D Result=40 10:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:00 Get A/D filter: -9.255963e+061 result=40 10:17:00 Get A/D value=-858993460 result=40 10:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:00 Aux= 10:17:00 Message to Camera, serial 7680 queued 10:17:03 Received message from Master: op=Shutter serial=7684 10:17:03 Shutter LASER close 10:17:03 Received message from Master: op=PointingHead serial=7688 10:17:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:17:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:17:03 Point started: ret=0 10:17:03 point_skyscan result=0 10:17:04 Check angles 10:17:04 SkyScan query 10:17:05 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.845<-21523 Statuses=0009 0009 10:17:05 Msec=0 True Az=136.215 Ze=-142.845 Az status=0009 Ze status=0009 10:17:05 Check angles 10:17:05 SkyScan query 10:17:06 SkyScan query done: ret=0 az=154.14<-10276 ze=-121.455<-20097 Statuses=0009 0009 10:17:06 Msec=750 True Az=154.14 Ze=-121.455 Az status=0009 Ze status=0009 10:17:06 Check angles 10:17:06 SkyScan query 10:17:06 SkyScan query done: ret=0 az=171.57<-11438 ze=-100.455<-18697 Statuses=0009 0009 10:17:06 Msec=1500 True Az=171.57 Ze=-100.455 Az status=0009 Ze status=0009 10:17:07 Check angles 10:17:07 SkyScan query 10:17:07 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.545<-17303 Statuses=0008 0009 10:17:07 Msec=2250 True Az=176.01 Ze=-79.545 Az status=0008 Ze status=0009 10:17:07 Check angles 10:17:07 SkyScan query 10:17:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.59<-15906 Statuses=0008 0009 10:17:08 Msec=3000 True Az=175.995 Ze=-58.59 Az status=0008 Ze status=0009 10:17:08 Check angles 10:17:08 SkyScan query 10:17:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:17:09 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:17:09 Message to Master queued w/err=0: serial=7688 error=0 10:17:14 Received message from Master: op=Filter serial=7689 10:17:14 Color wheel filter change from 0 to 0 10:17:14 FLIGetFilterPos err=0 currentPosition=0 10:17:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:14 Filter is already there-color wheel unchanged 10:17:14 Received message from Master: op=Shutter serial=7690 10:17:14 Shutter LASER close 10:17:14 Received message from Camera: op=State serial=7692 10:17:14 GetSingleValue result=40 Value=cccccccc 10:17:14 SkyScan query 10:17:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:17:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:15 Parameters OK 10:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:15 Set A/D data flow result=40 10:17:15 Set A/D channel type result=40 10:17:15 Set A/D encoding result=40 10:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:15 Set channel filter=0.000000e+000 result=40 10:17:15 Config A/D Result=40 10:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:15 Get A/D filter: -9.255963e+061 result=40 10:17:15 Get A/D value=-858993460 result=40 10:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:15 Parameters OK 10:17:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:15 Set A/D data flow result=40 10:17:15 Set A/D channel type result=40 10:17:15 Set A/D encoding result=40 10:17:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:15 Set channel filter=0.000000e+000 result=40 10:17:15 Config A/D Result=40 10:17:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:15 Get A/D filter: -9.255963e+061 result=40 10:17:15 Get A/D value=-858993460 result=40 10:17:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:15 Aux= 10:17:15 Message to Camera, serial 7692 queued 10:17:45 Received message from Master: op=PointingHead serial=7699 10:17:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:17:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:17:46 Point started: ret=0 10:17:46 point_skyscan result=0 10:17:46 Check angles 10:17:46 SkyScan query 10:17:47 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.81<-13454 Statuses=0009 0009 10:17:47 Msec=0 True Az=152.985 Ze=-21.81 Az status=0009 Ze status=0009 10:17:47 Check angles 10:17:47 SkyScan query 10:17:48 SkyScan query done: ret=0 az=135.6<-9040 ze=-0.855<-12057 Statuses=0009 0009 10:17:48 Msec=750 True Az=135.6 Ze=-0.855 Az status=0009 Ze status=0009 10:17:48 Check angles 10:17:48 SkyScan query 10:17:49 SkyScan query done: ret=0 az=117.57<-7838 ze=20.535<-10631 Statuses=0009 0009 10:17:49 Msec=1500 True Az=117.57 Ze=20.535 Az status=0009 Ze status=0009 10:17:49 Check angles 10:17:49 SkyScan query 10:17:49 SkyScan query done: ret=0 az=100.17<-6678 ze=41.49<-9234 Statuses=0009 0009 10:17:49 Msec=2250 True Az=100.17 Ze=41.49 Az status=0009 Ze status=0009 10:17:49 Check angles 10:17:49 SkyScan query 10:17:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 10:17:50 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 10:17:50 Check angles 10:17:50 SkyScan query 10:17:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:17:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:17:51 Message to Master queued w/err=0: serial=7699 error=0 10:17:56 Received message from Master: op=Filter serial=7700 10:17:56 Color wheel filter change from 0 to 0 10:17:56 FLIGetFilterPos err=0 currentPosition=0 10:17:56 FLIGetStepsRemaining err=0 RemainingSteps=0 10:17:56 Filter is already there-color wheel unchanged 10:17:56 Received message from Master: op=Shutter serial=7701 10:17:56 Shutter LASER close 10:17:56 Received message from Camera: op=State serial=7703 10:17:56 GetSingleValue result=40 Value=cccccccc 10:17:56 SkyScan query 10:17:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:17:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:57 Parameters OK 10:17:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:57 Set A/D data flow result=40 10:17:57 Set A/D channel type result=40 10:17:57 Set A/D encoding result=40 10:17:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:57 Set channel filter=0.000000e+000 result=40 10:17:57 Config A/D Result=40 10:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:57 Get A/D filter: -9.255963e+061 result=40 10:17:57 Get A/D value=-858993460 result=40 10:17:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:17:57 Parameters OK 10:17:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:17:57 Set A/D data flow result=40 10:17:57 Set A/D channel type result=40 10:17:57 Set A/D encoding result=40 10:17:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:17:57 Set channel filter=0.000000e+000 result=40 10:17:57 Config A/D Result=40 10:17:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:17:57 Get A/D filter: -9.255963e+061 result=40 10:17:57 Get A/D value=-858993460 result=40 10:17:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:17:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:17:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:17:57 Aux= 10:17:57 Message to Camera, serial 7703 queued 10:18:27 Received message from Master: op=PointingHead serial=7710 10:18:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:18:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:18:28 Point started: ret=0 10:18:28 point_skyscan result=0 10:18:29 Check angles 10:18:29 SkyScan query 10:18:29 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 10:18:29 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 10:18:29 Check angles 10:18:29 SkyScan query 10:18:30 SkyScan query done: ret=0 az=127.05<-8470 ze=38.505<-9433 Statuses=0009 0008 10:18:30 Msec=750 True Az=127.05 Ze=38.505 Az status=0009 Ze status=0008 10:18:30 Check angles 10:18:30 SkyScan query 10:18:31 SkyScan query done: ret=0 az=144.54<-9636 ze=38.505<-9433 Statuses=0009 0008 10:18:31 Msec=1500 True Az=144.54 Ze=38.505 Az status=0009 Ze status=0008 10:18:31 Check angles 10:18:31 SkyScan query 10:18:31 SkyScan query done: ret=0 az=162<-10800 ze=38.505<-9433 Statuses=0009 0008 10:18:31 Msec=2250 True Az=162 Ze=38.505 Az status=0009 Ze status=0008 10:18:32 Check angles 10:18:32 SkyScan query 10:18:32 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:18:32 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:18:32 Check angles 10:18:32 SkyScan query 10:18:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:18:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:18:33 Message to Master queued w/err=0: serial=7710 error=0 10:18:38 Received message from Master: op=Filter serial=7711 10:18:38 Color wheel filter change from 0 to 0 10:18:38 FLIGetFilterPos err=0 currentPosition=0 10:18:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:18:38 Filter is already there-color wheel unchanged 10:18:38 Received message from Master: op=Shutter serial=7712 10:18:38 Shutter LASER close 10:18:38 Received message from Camera: op=State serial=7714 10:18:38 GetSingleValue result=40 Value=cccccccc 10:18:38 SkyScan query 10:18:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:18:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:39 Parameters OK 10:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:39 Set A/D data flow result=40 10:18:39 Set A/D channel type result=40 10:18:39 Set A/D encoding result=40 10:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:39 Set channel filter=0.000000e+000 result=40 10:18:39 Config A/D Result=40 10:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:39 Get A/D filter: -9.255963e+061 result=40 10:18:39 Get A/D value=-858993460 result=40 10:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:18:39 Parameters OK 10:18:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:18:39 Set A/D data flow result=40 10:18:39 Set A/D channel type result=40 10:18:39 Set A/D encoding result=40 10:18:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:18:39 Set channel filter=0.000000e+000 result=40 10:18:39 Config A/D Result=40 10:18:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:18:39 Get A/D filter: -9.255963e+061 result=40 10:18:39 Get A/D value=-858993460 result=40 10:18:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:18:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:18:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:18:39 Aux= 10:18:39 Message to Camera, serial 7714 queued 10:19:10 Received message from Master: op=PointingHead serial=7721 10:19:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:19:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:19:10 Point started: ret=0 10:19:10 point_skyscan result=0 10:19:11 Check angles 10:19:11 SkyScan query 10:19:11 SkyScan query done: ret=0 az=153.24<-10216 ze=8.955<-11403 Statuses=0009 0009 10:19:11 Msec=0 True Az=153.24 Ze=8.955 Az status=0009 Ze status=0009 10:19:11 Check angles 10:19:11 SkyScan query 10:19:12 SkyScan query done: ret=0 az=135.825<-9055 ze=-11.97<-12798 Statuses=0009 0009 10:19:12 Msec=750 True Az=135.825 Ze=-11.97 Az status=0009 Ze status=0009 10:19:12 Check angles 10:19:12 SkyScan query 10:19:13 SkyScan query done: ret=0 az=118.275<-7885 ze=-32.94<-14196 Statuses=0009 0009 10:19:13 Msec=1500 True Az=118.275 Ze=-32.94 Az status=0009 Ze status=0009 10:19:13 Check angles 10:19:13 SkyScan query 10:19:13 SkyScan query done: ret=0 az=100.875<-6725 ze=-51.48<-15432 Statuses=0009 0009 10:19:13 Msec=2250 True Az=100.875 Ze=-51.48 Az status=0009 Ze status=0009 10:19:14 Check angles 10:19:14 SkyScan query 10:19:14 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:19:14 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:19:14 Check angles 10:19:14 SkyScan query 10:19:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 10:19:15 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 10:19:15 Message to Master queued w/err=0: serial=7721 error=0 10:19:20 Received message from Master: op=Filter serial=7722 10:19:20 Color wheel filter change from 0 to 0 10:19:20 FLIGetFilterPos err=0 currentPosition=0 10:19:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:19:20 Filter is already there-color wheel unchanged 10:19:20 Received message from Master: op=Shutter serial=7723 10:19:20 Shutter LASER close 10:19:20 Received message from Camera: op=State serial=7725 10:19:20 GetSingleValue result=40 Value=cccccccc 10:19:20 SkyScan query 10:19:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:19:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:21 Parameters OK 10:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:21 Set A/D data flow result=40 10:19:21 Set A/D channel type result=40 10:19:21 Set A/D encoding result=40 10:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:21 Set channel filter=0.000000e+000 result=40 10:19:21 Config A/D Result=40 10:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:21 Get A/D filter: -9.255963e+061 result=40 10:19:21 Get A/D value=-858993460 result=40 10:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:19:21 Parameters OK 10:19:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:19:21 Set A/D data flow result=40 10:19:21 Set A/D channel type result=40 10:19:21 Set A/D encoding result=40 10:19:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:19:21 Set channel filter=0.000000e+000 result=40 10:19:21 Config A/D Result=40 10:19:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:19:21 Get A/D filter: -9.255963e+061 result=40 10:19:21 Get A/D value=-858993460 result=40 10:19:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:19:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:19:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:19:21 Aux= 10:19:21 Message to Camera, serial 7725 queued 10:19:52 Received message from Master: op=PointingHead serial=7732 10:19:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:19:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:19:52 Point started: ret=0 10:19:52 point_skyscan result=0 10:19:53 Check angles 10:19:53 SkyScan query 10:19:53 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.3<-17420 Statuses=0009 0009 10:19:53 Msec=0 True Az=108.975 Ze=-81.3 Az status=0009 Ze status=0009 10:19:53 Check angles 10:19:53 SkyScan query 10:19:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.255<-18817 Statuses=0008 0009 10:19:54 Msec=750 True Az=112.995 Ze=-102.255 Az status=0008 Ze status=0009 10:19:54 Check angles 10:19:54 SkyScan query 10:19:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 10:19:55 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 10:19:55 Check angles 10:19:55 SkyScan query 10:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 10:19:56 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 10:19:56 Check angles 10:19:56 SkyScan query 10:19:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 10:19:56 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 10:19:57 Check angles 10:19:57 SkyScan query 10:19:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:19:57 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:19:57 Message to Master queued w/err=0: serial=7732 error=0 10:20:02 Received message from Master: op=Filter serial=7733 10:20:02 Color wheel filter change from 0 to 0 10:20:02 FLIGetFilterPos err=0 currentPosition=0 10:20:02 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:02 Filter is already there-color wheel unchanged 10:20:02 Received message from Master: op=Shutter serial=7734 10:20:02 Shutter LASER open 10:20:02 Received message from Camera: op=State serial=7736 10:20:02 GetSingleValue result=40 Value=cccccccc 10:20:02 SkyScan query 10:20:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:20:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:03 Parameters OK 10:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:03 Set A/D data flow result=40 10:20:03 Set A/D channel type result=40 10:20:03 Set A/D encoding result=40 10:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:03 Set channel filter=0.000000e+000 result=40 10:20:03 Config A/D Result=40 10:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:03 Get A/D filter: -9.255963e+061 result=40 10:20:03 Get A/D value=-858993460 result=40 10:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:03 Parameters OK 10:20:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:03 Set A/D data flow result=40 10:20:03 Set A/D channel type result=40 10:20:03 Set A/D encoding result=40 10:20:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:03 Set channel filter=0.000000e+000 result=40 10:20:03 Config A/D Result=40 10:20:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:03 Get A/D filter: -9.255963e+061 result=40 10:20:03 Get A/D value=-858993460 result=40 10:20:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:03 Aux= 10:20:03 Message to Camera, serial 7736 queued 10:20:05 Received message from Master: op=Shutter serial=7740 10:20:05 Shutter LASER close 10:20:06 Received message from Master: op=PointingHead serial=7744 10:20:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:20:06 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:20:06 Point started: ret=0 10:20:06 point_skyscan result=0 10:20:07 Check angles 10:20:07 SkyScan query 10:20:08 SkyScan query done: ret=0 az=89.925<-5995 ze=157.2<-1520 Statuses=0009 0009 10:20:08 Msec=0 True Az=89.925 Ze=157.2 Az status=0009 Ze status=0009 10:20:08 Check angles 10:20:08 SkyScan query 10:20:08 SkyScan query done: ret=0 az=72.45<-4830 ze=136.245<-2917 Statuses=0009 0009 10:20:08 Msec=750 True Az=72.45 Ze=136.245 Az status=0009 Ze status=0009 10:20:08 Check angles 10:20:08 SkyScan query 10:20:09 SkyScan query done: ret=0 az=54.945<-3663 ze=115.29<-4314 Statuses=0009 0009 10:20:09 Msec=1500 True Az=54.945 Ze=115.29 Az status=0009 Ze status=0009 10:20:09 Check angles 10:20:09 SkyScan query 10:20:10 SkyScan query done: ret=0 az=40.86<-2724 ze=93.9<-5740 Statuses=0009 0009 10:20:10 Msec=2250 True Az=40.86 Ze=93.9 Az status=0009 Ze status=0009 10:20:10 Check angles 10:20:10 SkyScan query 10:20:11 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 10:20:11 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 10:20:11 Check angles 10:20:11 SkyScan query 10:20:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 10:20:11 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 10:20:12 Check angles 10:20:12 SkyScan query 10:20:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:20:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:20:12 Message to Master queued w/err=0: serial=7744 error=0 10:20:17 Received message from Master: op=Filter serial=7745 10:20:17 Color wheel filter change from 0 to 0 10:20:17 FLIGetFilterPos err=0 currentPosition=0 10:20:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:20:17 Filter is already there-color wheel unchanged 10:20:17 Received message from Master: op=Shutter serial=7746 10:20:17 Shutter LASER close 10:20:17 Received message from Camera: op=State serial=7748 10:20:17 GetSingleValue result=40 Value=cccccccc 10:20:17 SkyScan query 10:20:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:20:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:18 Parameters OK 10:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:18 Set A/D data flow result=40 10:20:18 Set A/D channel type result=40 10:20:18 Set A/D encoding result=40 10:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:18 Set channel filter=0.000000e+000 result=40 10:20:18 Config A/D Result=40 10:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:18 Get A/D filter: -9.255963e+061 result=40 10:20:18 Get A/D value=-858993460 result=40 10:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:20:18 Parameters OK 10:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:20:18 Set A/D data flow result=40 10:20:18 Set A/D channel type result=40 10:20:18 Set A/D encoding result=40 10:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:20:18 Set channel filter=0.000000e+000 result=40 10:20:18 Config A/D Result=40 10:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:20:18 Get A/D filter: -9.255963e+061 result=40 10:20:18 Get A/D value=-858993460 result=40 10:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:20:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:20:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:20:18 Aux= [UTC 2018-12-4 10:20:18] 10:20:18 Message to Camera, serial 7748 queued 10:20:49 Received message from Master: op=PointingHead serial=7755 10:20:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:20:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:20:49 Point started: ret=0 10:20:49 point_skyscan result=0 10:20:50 Check angles 10:20:50 SkyScan query 10:20:51 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 10:20:51 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 10:20:51 Check angles 10:20:51 SkyScan query 10:20:51 SkyScan query done: ret=0 az=81.795<-5453 ze=66.495<-7567 Statuses=0009 0008 10:20:51 Msec=750 True Az=81.795 Ze=66.495 Az status=0009 Ze status=0008 10:20:51 Check angles 10:20:51 SkyScan query 10:20:52 SkyScan query done: ret=0 az=99.24<-6616 ze=66.495<-7567 Statuses=0009 0008 10:20:52 Msec=1500 True Az=99.24 Ze=66.495 Az status=0009 Ze status=0008 10:20:52 Check angles 10:20:52 SkyScan query 10:20:53 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 10:20:53 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 10:20:53 Check angles 10:20:53 SkyScan query 10:20:54 SkyScan query done: ret=0 az=134.595<-8973 ze=66.495<-7567 Statuses=0009 0008 10:20:54 Msec=3000 True Az=134.595 Ze=66.495 Az status=0009 Ze status=0008 10:20:54 Check angles 10:20:54 SkyScan query 10:20:54 SkyScan query done: ret=0 az=151.905<-10127 ze=66.495<-7567 Statuses=0009 0008 10:20:54 Msec=3750 True Az=151.905 Ze=66.495 Az status=0009 Ze status=0008 10:20:54 Check angles 10:20:54 SkyScan query 10:20:55 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:20:55 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:20:55 Message to Master queued w/err=0: serial=7755 error=0 10:21:00 Received message from Master: op=Filter serial=7756 10:21:00 Color wheel filter change from 0 to 0 10:21:00 FLIGetFilterPos err=0 currentPosition=0 10:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:00 Filter is already there-color wheel unchanged 10:21:00 Received message from Master: op=Shutter serial=7757 10:21:00 Shutter LASER close 10:21:00 Received message from Camera: op=State serial=7759 10:21:00 GetSingleValue result=40 Value=cccccccc 10:21:00 SkyScan query 10:21:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:21:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:01 Parameters OK 10:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:01 Set A/D data flow result=40 10:21:01 Set A/D channel type result=40 10:21:01 Set A/D encoding result=40 10:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:01 Set channel filter=0.000000e+000 result=40 10:21:01 Config A/D Result=40 10:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:01 Get A/D filter: -9.255963e+061 result=40 10:21:01 Get A/D value=-858993460 result=40 10:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:01 Parameters OK 10:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:01 Set A/D data flow result=40 10:21:01 Set A/D channel type result=40 10:21:01 Set A/D encoding result=40 10:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:01 Set channel filter=0.000000e+000 result=40 10:21:01 Config A/D Result=40 10:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:01 Get A/D filter: -9.255963e+061 result=40 10:21:01 Get A/D value=-858993460 result=40 10:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:01 Aux= 10:21:01 Message to Camera, serial 7759 queued 10:21:32 Received message from Master: op=PointingHead serial=7766 10:21:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:21:32 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:21:32 Point started: ret=0 10:21:32 point_skyscan result=0 10:21:33 Check angles 10:21:33 SkyScan query 10:21:33 SkyScan query done: ret=0 az=135.06<-9004 ze=36.735<-9551 Statuses=0009 0009 10:21:33 Msec=0 True Az=135.06 Ze=36.735 Az status=0009 Ze status=0009 10:21:34 Check angles 10:21:34 SkyScan query 10:21:34 SkyScan query done: ret=0 az=117.51<-7834 ze=15.825<-10945 Statuses=0009 0009 10:21:34 Msec=750 True Az=117.51 Ze=15.825 Az status=0009 Ze status=0009 10:21:34 Check angles 10:21:34 SkyScan query 10:21:35 SkyScan query done: ret=0 az=100.155<-6677 ze=-5.13<-12342 Statuses=0009 0009 10:21:35 Msec=1500 True Az=100.155 Ze=-5.13 Az status=0009 Ze status=0009 10:21:35 Check angles 10:21:35 SkyScan query 10:21:36 SkyScan query done: ret=0 az=82.2<-5480 ze=-26.52<-13768 Statuses=0009 0009 10:21:36 Msec=2250 True Az=82.2 Ze=-26.52 Az status=0009 Ze status=0009 10:21:36 Check angles 10:21:36 SkyScan query 10:21:36 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.565<-14571 Statuses=0009 0008 10:21:36 Msec=3000 True Az=64.8 Ze=-38.565 Az status=0009 Ze status=0008 10:21:37 Check angles 10:21:37 SkyScan query 10:21:37 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.535<-14569 Statuses=0009 0008 10:21:37 Msec=3750 True Az=47.385 Ze=-38.535 Az status=0009 Ze status=0008 10:21:37 Check angles 10:21:37 SkyScan query 10:21:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:21:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:21:38 Message to Master queued w/err=0: serial=7766 error=0 10:21:43 Received message from Master: op=Filter serial=7767 10:21:43 Color wheel filter change from 0 to 0 10:21:43 FLIGetFilterPos err=0 currentPosition=0 10:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:21:43 Filter is already there-color wheel unchanged 10:21:43 Received message from Master: op=Shutter serial=7768 10:21:43 Shutter LASER close 10:21:43 Received message from Camera: op=State serial=7770 10:21:43 GetSingleValue result=40 Value=cccccccc 10:21:43 SkyScan query 10:21:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:21:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:44 Parameters OK 10:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:44 Set A/D data flow result=40 10:21:44 Set A/D channel type result=40 10:21:44 Set A/D encoding result=40 10:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:44 Set channel filter=0.000000e+000 result=40 10:21:44 Config A/D Result=40 10:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:44 Get A/D filter: -9.255963e+061 result=40 10:21:44 Get A/D value=-858993460 result=40 10:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:21:44 Parameters OK 10:21:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:21:44 Set A/D data flow result=40 10:21:44 Set A/D channel type result=40 10:21:44 Set A/D encoding result=40 10:21:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:21:44 Set channel filter=0.000000e+000 result=40 10:21:44 Config A/D Result=40 10:21:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:21:44 Get A/D filter: -9.255963e+061 result=40 10:21:44 Get A/D value=-858993460 result=40 10:21:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:21:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:21:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:21:44 Aux= 10:21:44 Message to Camera, serial 7770 queued 10:21:49 Received message from Master: op=Identify serial=7771 10:22:15 Received message from Master: op=PointingHead serial=7780 10:22:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:22:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:22:15 Point started: ret=0 10:22:15 point_skyscan result=0 10:22:16 Check angles 10:22:16 SkyScan query 10:22:16 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.04<-16536 Statuses=0009 0009 10:22:16 Msec=0 True Az=63.795 Ze=-68.04 Az status=0009 Ze status=0009 10:22:16 Check angles 10:22:16 SkyScan query 10:22:17 SkyScan query done: ret=0 az=81.105<-5407 ze=-88.995<-17933 Statuses=0009 0009 10:22:17 Msec=750 True Az=81.105 Ze=-88.995 Az status=0009 Ze status=0009 10:22:17 Check angles 10:22:17 SkyScan query 10:22:18 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.92<-19328 Statuses=0009 0009 10:22:18 Msec=1500 True Az=98.805 Ze=-109.92 Az status=0009 Ze status=0009 10:22:18 Check angles 10:22:18 SkyScan query 10:22:18 SkyScan query done: ret=0 az=116.16<-7744 ze=-130.875<-20725 Statuses=0009 0009 10:22:18 Msec=2250 True Az=116.16 Ze=-130.875 Az status=0009 Ze status=0009 10:22:19 Check angles 10:22:19 SkyScan query 10:22:19 SkyScan query done: ret=0 az=131.04<-8736 ze=-141.525<-21435 Statuses=0009 0008 10:22:19 Msec=3000 True Az=131.04 Ze=-141.525 Az status=0009 Ze status=0008 10:22:19 Check angles 10:22:19 SkyScan query 10:22:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:22:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:22:20 Message to Master queued w/err=0: serial=7780 error=0 10:22:25 Received message from Master: op=Filter serial=7781 10:22:25 Color wheel filter change from 0 to 0 10:22:25 FLIGetFilterPos err=0 currentPosition=0 10:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:22:25 Filter is already there-color wheel unchanged 10:22:25 Received message from Master: op=Shutter serial=7782 10:22:25 Shutter LASER close 10:22:25 Received message from Camera: op=State serial=7784 10:22:25 GetSingleValue result=40 Value=cccccccc 10:22:25 SkyScan query 10:22:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:26 Parameters OK 10:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:26 Set A/D data flow result=40 10:22:26 Set A/D channel type result=40 10:22:26 Set A/D encoding result=40 10:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:26 Set channel filter=0.000000e+000 result=40 10:22:26 Config A/D Result=40 10:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:26 Get A/D filter: -9.255963e+061 result=40 10:22:26 Get A/D value=-858993460 result=40 10:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:22:26 Parameters OK 10:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:22:26 Set A/D data flow result=40 10:22:26 Set A/D channel type result=40 10:22:26 Set A/D encoding result=40 10:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:22:26 Set channel filter=0.000000e+000 result=40 10:22:26 Config A/D Result=40 10:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:22:26 Get A/D filter: -9.255963e+061 result=40 10:22:26 Get A/D value=-858993460 result=40 10:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:22:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:22:26 Aux= 10:22:26 Message to Camera, serial 7784 queued 10:22:57 Received message from Master: op=PointingHead serial=7791 10:22:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:22:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:22:57 Point started: ret=0 10:22:57 point_skyscan result=0 10:22:58 Check angles 10:22:58 SkyScan query 10:22:58 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.12<-23408 Statuses=0009 0009 10:22:58 Msec=0 True Az=113.025 Ze=-171.12 Az status=0009 Ze status=0009 10:22:58 Check angles 10:22:58 SkyScan query 10:22:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:22:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:22:59 Message to Master queued w/err=0: serial=7791 error=0 10:23:04 Received message from Master: op=Filter serial=7792 10:23:04 Color wheel filter change from 0 to 0 10:23:04 FLIGetFilterPos err=0 currentPosition=0 10:23:04 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:04 Filter is already there-color wheel unchanged 10:23:04 Received message from Master: op=Shutter serial=7793 10:23:04 Shutter LASER open 10:23:04 Received message from Camera: op=State serial=7795 10:23:04 GetSingleValue result=40 Value=cccccccc 10:23:04 SkyScan query 10:23:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:23:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:05 Parameters OK 10:23:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:05 Set A/D data flow result=40 10:23:05 Set A/D channel type result=40 10:23:05 Set A/D encoding result=40 10:23:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:05 Set channel filter=0.000000e+000 result=40 10:23:05 Config A/D Result=40 10:23:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:05 Get A/D filter: -9.255963e+061 result=40 10:23:05 Get A/D value=-858993460 result=40 10:23:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:05 Parameters OK 10:23:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:05 Set A/D data flow result=40 10:23:05 Set A/D channel type result=40 10:23:05 Set A/D encoding result=40 10:23:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:05 Set channel filter=0.000000e+000 result=40 10:23:05 Config A/D Result=40 10:23:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:05 Get A/D filter: -9.255963e+061 result=40 10:23:05 Get A/D value=-858993460 result=40 10:23:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:05 Aux= 10:23:05 Message to Camera, serial 7795 queued 10:23:07 Received message from Master: op=Shutter serial=7799 10:23:07 Shutter LASER close 10:23:08 Received message from Master: op=PointingHead serial=7803 10:23:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:23:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:23:08 Point started: ret=0 10:23:08 point_skyscan result=0 10:23:09 Check angles 10:23:09 SkyScan query 10:23:10 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.13<-21542 Statuses=0009 0009 10:23:10 Msec=0 True Az=136.185 Ze=-143.13 Az status=0009 Ze status=0009 10:23:10 Check angles 10:23:10 SkyScan query 10:23:10 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.16<-20144 Statuses=0009 0009 10:23:10 Msec=750 True Az=153.63 Ze=-122.16 Az status=0009 Ze status=0009 10:23:11 Check angles 10:23:11 SkyScan query 10:23:11 SkyScan query done: ret=0 az=171.06<-11404 ze=-101.235<-18749 Statuses=0009 0009 10:23:11 Msec=1500 True Az=171.06 Ze=-101.235 Az status=0009 Ze status=0009 10:23:11 Check angles 10:23:11 SkyScan query 10:23:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.265<-17351 Statuses=0008 0009 10:23:12 Msec=2250 True Az=176.01 Ze=-80.265 Az status=0008 Ze status=0009 10:23:12 Check angles 10:23:12 SkyScan query 10:23:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.31<-15954 Statuses=0008 0009 10:23:13 Msec=3000 True Az=176.01 Ze=-59.31 Az status=0008 Ze status=0009 10:23:13 Check angles 10:23:13 SkyScan query 10:23:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:23:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:23:13 Message to Master queued w/err=0: serial=7803 error=0 10:23:18 Received message from Master: op=Filter serial=7804 10:23:18 Color wheel filter change from 0 to 0 10:23:18 FLIGetFilterPos err=0 currentPosition=0 10:23:18 FLIGetStepsRemaining err=0 RemainingSteps=0 10:23:18 Filter is already there-color wheel unchanged 10:23:19 Received message from Master: op=Shutter serial=7805 10:23:19 Shutter LASER close 10:23:19 Received message from Camera: op=State serial=7807 10:23:19 GetSingleValue result=40 Value=cccccccc 10:23:19 SkyScan query 10:23:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:23:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:19 Parameters OK 10:23:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:19 Set A/D data flow result=40 10:23:19 Set A/D channel type result=40 10:23:19 Set A/D encoding result=40 10:23:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:19 Set channel filter=0.000000e+000 result=40 10:23:19 Config A/D Result=40 10:23:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:19 Get A/D filter: -9.255963e+061 result=40 10:23:19 Get A/D value=-858993460 result=40 10:23:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:23:19 Parameters OK 10:23:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:23:19 Set A/D data flow result=40 10:23:19 Set A/D channel type result=40 10:23:19 Set A/D encoding result=40 10:23:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:23:19 Set channel filter=0.000000e+000 result=40 10:23:19 Config A/D Result=40 10:23:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:23:19 Get A/D filter: -9.255963e+061 result=40 10:23:19 Get A/D value=-858993460 result=40 10:23:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:23:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:23:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:23:19 Aux= 10:23:19 Message to Camera, serial 7807 queued 10:23:50 Received message from Master: op=PointingHead serial=7814 10:23:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:23:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:23:51 Point started: ret=0 10:23:51 point_skyscan result=0 10:23:51 Check angles 10:23:51 SkyScan query 10:23:52 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.345<-13423 Statuses=0009 0009 10:23:52 Msec=0 True Az=152.685 Ze=-21.345 Az status=0009 Ze status=0009 10:23:52 Check angles 10:23:52 SkyScan query 10:23:53 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.36<-12024 Statuses=0009 0009 10:23:53 Msec=750 True Az=135.15 Ze=-0.36 Az status=0009 Ze status=0009 10:23:53 Check angles 10:23:53 SkyScan query 10:23:53 SkyScan query done: ret=0 az=117.585<-7839 ze=20.58<-10628 Statuses=0009 0009 10:23:53 Msec=1500 True Az=117.585 Ze=20.58 Az status=0009 Ze status=0009 10:23:54 Check angles 10:23:54 SkyScan query 10:23:54 SkyScan query done: ret=0 az=99.915<-6661 ze=41.97<-9202 Statuses=0009 0009 10:23:54 Msec=2250 True Az=99.915 Ze=41.97 Az status=0009 Ze status=0009 10:23:54 Check angles 10:23:54 SkyScan query 10:23:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 10:23:55 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 10:23:55 Check angles 10:23:55 SkyScan query 10:23:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:23:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:23:56 Message to Master queued w/err=0: serial=7814 error=0 10:24:01 Received message from Master: op=Filter serial=7815 10:24:01 Color wheel filter change from 0 to 0 10:24:01 FLIGetFilterPos err=0 currentPosition=0 10:24:01 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:01 Filter is already there-color wheel unchanged 10:24:01 Received message from Master: op=Shutter serial=7816 10:24:01 Shutter LASER close 10:24:01 Received message from Camera: op=State serial=7818 10:24:01 GetSingleValue result=40 Value=cccccccc 10:24:01 SkyScan query 10:24:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:24:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:01 Parameters OK 10:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:01 Set A/D data flow result=40 10:24:01 Set A/D channel type result=40 10:24:01 Set A/D encoding result=40 10:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:01 Set channel filter=0.000000e+000 result=40 10:24:01 Config A/D Result=40 10:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:01 Get A/D filter: -9.255963e+061 result=40 10:24:01 Get A/D value=-858993460 result=40 10:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:01 Parameters OK 10:24:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:01 Set A/D data flow result=40 10:24:01 Set A/D channel type result=40 10:24:01 Set A/D encoding result=40 10:24:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:01 Set channel filter=0.000000e+000 result=40 10:24:01 Config A/D Result=40 10:24:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:01 Get A/D filter: -9.255963e+061 result=40 10:24:01 Get A/D value=-858993460 result=40 10:24:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:01 Aux= 10:24:01 Message to Camera, serial 7818 queued 10:24:32 Received message from Master: op=PointingHead serial=7825 10:24:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:24:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:24:33 Point started: ret=0 10:24:33 point_skyscan result=0 10:24:33 Check angles 10:24:33 SkyScan query 10:24:34 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 10:24:34 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 10:24:34 Check angles 10:24:34 SkyScan query 10:24:35 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 10:24:35 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 10:24:35 Check angles 10:24:35 SkyScan query 10:24:36 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 10:24:36 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 10:24:36 Check angles 10:24:36 SkyScan query 10:24:36 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 10:24:36 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 10:24:36 Check angles 10:24:36 SkyScan query 10:24:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:24:37 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:24:37 Check angles 10:24:37 SkyScan query 10:24:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:24:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:24:38 Message to Master queued w/err=0: serial=7825 error=0 10:24:43 Received message from Master: op=Filter serial=7826 10:24:43 Color wheel filter change from 0 to 0 10:24:43 FLIGetFilterPos err=0 currentPosition=0 10:24:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:24:43 Filter is already there-color wheel unchanged 10:24:43 Received message from Master: op=Shutter serial=7827 10:24:43 Shutter LASER close 10:24:43 Received message from Camera: op=State serial=7829 10:24:43 GetSingleValue result=40 Value=cccccccc 10:24:43 SkyScan query 10:24:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:24:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:44 Parameters OK 10:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:44 Set A/D data flow result=40 10:24:44 Set A/D channel type result=40 10:24:44 Set A/D encoding result=40 10:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:44 Set channel filter=0.000000e+000 result=40 10:24:44 Config A/D Result=40 10:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:44 Get A/D filter: -9.255963e+061 result=40 10:24:44 Get A/D value=-858993460 result=40 10:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:24:44 Parameters OK 10:24:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:24:44 Set A/D data flow result=40 10:24:44 Set A/D channel type result=40 10:24:44 Set A/D encoding result=40 10:24:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:24:44 Set channel filter=0.000000e+000 result=40 10:24:44 Config A/D Result=40 10:24:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:24:44 Get A/D filter: -9.255963e+061 result=40 10:24:44 Get A/D value=-858993460 result=40 10:24:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:24:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:24:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:24:44 Aux= 10:24:44 Message to Camera, serial 7829 queued 10:25:14 Received message from Master: op=PointingHead serial=7836 10:25:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:25:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:25:15 Point started: ret=0 10:25:15 point_skyscan result=0 10:25:16 Check angles 10:25:16 SkyScan query 10:25:16 SkyScan query done: ret=0 az=153.195<-10213 ze=8.85<-11410 Statuses=0009 0009 10:25:16 Msec=0 True Az=153.195 Ze=8.85 Az status=0009 Ze status=0009 10:25:16 Check angles 10:25:16 SkyScan query 10:25:17 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.51<-12834 Statuses=0009 0009 10:25:17 Msec=750 True Az=135.39 Ze=-12.51 Az status=0009 Ze status=0009 10:25:17 Check angles 10:25:17 SkyScan query 10:25:18 SkyScan query done: ret=0 az=117.48<-7832 ze=-33.87<-14258 Statuses=0009 0009 10:25:18 Msec=1500 True Az=117.48 Ze=-33.87 Az status=0009 Ze status=0009 10:25:18 Check angles 10:25:18 SkyScan query 10:25:18 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.555<-15437 Statuses=0009 0009 10:25:18 Msec=2250 True Az=100.08 Ze=-51.555 Az status=0009 Ze status=0009 10:25:19 Check angles 10:25:19 SkyScan query 10:25:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 10:25:19 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 10:25:19 Check angles 10:25:19 SkyScan query 10:25:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:25:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:25:20 Message to Master queued w/err=0: serial=7836 error=0 10:25:25 Received message from Master: op=Filter serial=7837 10:25:25 Color wheel filter change from 0 to 0 10:25:25 FLIGetFilterPos err=0 currentPosition=0 10:25:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:25:25 Filter is already there-color wheel unchanged 10:25:25 Received message from Master: op=Shutter serial=7838 10:25:25 Shutter LASER close 10:25:25 Received message from Camera: op=State serial=7840 10:25:25 GetSingleValue result=40 Value=cccccccc 10:25:25 SkyScan query 10:25:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:25:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:26 Parameters OK 10:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:26 Set A/D data flow result=40 10:25:26 Set A/D channel type result=40 10:25:26 Set A/D encoding result=40 10:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:26 Set channel filter=0.000000e+000 result=40 10:25:26 Config A/D Result=40 10:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:26 Get A/D filter: -9.255963e+061 result=40 10:25:26 Get A/D value=-858993460 result=40 10:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:25:26 Parameters OK 10:25:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:25:26 Set A/D data flow result=40 10:25:26 Set A/D channel type result=40 10:25:26 Set A/D encoding result=40 10:25:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:25:26 Set channel filter=0.000000e+000 result=40 10:25:26 Config A/D Result=40 10:25:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:25:26 Get A/D filter: -9.255963e+061 result=40 10:25:26 Get A/D value=-858993460 result=40 10:25:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:25:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:25:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:25:26 Aux= 10:25:26 Message to Camera, serial 7840 queued 10:25:57 Received message from Master: op=PointingHead serial=7847 10:25:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:25:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:25:57 Point started: ret=0 10:25:57 point_skyscan result=0 10:25:58 Check angles 10:25:58 SkyScan query 10:25:58 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.135<-17409 Statuses=0009 0009 10:25:58 Msec=0 True Az=108.84 Ze=-81.135 Az status=0009 Ze status=0009 10:25:58 Check angles 10:25:58 SkyScan query 10:25:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.51<-18834 Statuses=0008 0009 10:25:59 Msec=750 True Az=112.995 Ze=-102.51 Az status=0008 Ze status=0009 10:25:59 Check angles 10:25:59 SkyScan query 10:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.45<-20230 Statuses=0008 0009 10:26:00 Msec=1500 True Az=112.995 Ze=-123.45 Az status=0008 Ze status=0009 10:26:00 Check angles 10:26:00 SkyScan query 10:26:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.405<-21627 Statuses=0008 0009 10:26:00 Msec=2250 True Az=112.995 Ze=-144.405 Az status=0008 Ze status=0009 10:26:01 Check angles 10:26:01 SkyScan query 10:26:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 10:26:01 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 10:26:01 Check angles 10:26:01 SkyScan query 10:26:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:26:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:26:02 Message to Master queued w/err=0: serial=7847 error=0 10:26:07 Received message from Master: op=Filter serial=7848 10:26:07 Color wheel filter change from 0 to 0 10:26:07 FLIGetFilterPos err=0 currentPosition=0 10:26:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:07 Filter is already there-color wheel unchanged 10:26:07 Received message from Master: op=Shutter serial=7849 10:26:07 Shutter LASER open 10:26:07 Received message from Camera: op=State serial=7851 10:26:07 GetSingleValue result=40 Value=cccccccc 10:26:07 SkyScan query 10:26:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:26:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:08 Parameters OK 10:26:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:08 Set A/D data flow result=40 10:26:08 Set A/D channel type result=40 10:26:08 Set A/D encoding result=40 10:26:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:08 Set channel filter=0.000000e+000 result=40 10:26:08 Config A/D Result=40 10:26:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:08 Get A/D filter: -9.255963e+061 result=40 10:26:08 Get A/D value=-858993460 result=40 10:26:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:08 Parameters OK 10:26:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:08 Set A/D data flow result=40 10:26:08 Set A/D channel type result=40 10:26:08 Set A/D encoding result=40 10:26:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:08 Set channel filter=0.000000e+000 result=40 10:26:08 Config A/D Result=40 10:26:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:08 Get A/D filter: -9.255963e+061 result=40 10:26:08 Get A/D value=-858993460 result=40 10:26:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:08 Aux= 10:26:08 Message to Camera, serial 7851 queued 10:26:10 Received message from Master: op=Shutter serial=7855 10:26:10 Shutter LASER close 10:26:11 Received message from Master: op=PointingHead serial=7859 10:26:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:26:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:26:11 Point started: ret=0 10:26:11 point_skyscan result=0 10:26:12 Check angles 10:26:12 SkyScan query 10:26:12 SkyScan query done: ret=0 az=89.475<-5965 ze=156.75<-1550 Statuses=0009 0009 10:26:12 Msec=0 True Az=89.475 Ze=156.75 Az status=0009 Ze status=0009 10:26:13 Check angles 10:26:13 SkyScan query 10:26:13 SkyScan query done: ret=0 az=72.06<-4804 ze=135.765<-2949 Statuses=0009 0009 10:26:13 Msec=750 True Az=72.06 Ze=135.765 Az status=0009 Ze status=0009 10:26:13 Check angles 10:26:13 SkyScan query 10:26:14 SkyScan query done: ret=0 az=54.66<-3644 ze=114.825<-4345 Statuses=0009 0009 10:26:14 Msec=1500 True Az=54.66 Ze=114.825 Az status=0009 Ze status=0009 10:26:14 Check angles 10:26:14 SkyScan query 10:26:15 SkyScan query done: ret=0 az=40.86<-2724 ze=93.87<-5742 Statuses=0009 0009 10:26:15 Msec=2250 True Az=40.86 Ze=93.87 Az status=0009 Ze status=0009 10:26:15 Check angles 10:26:15 SkyScan query 10:26:15 SkyScan query done: ret=0 az=41.01<-2734 ze=72.9<-7140 Statuses=0008 0009 10:26:15 Msec=3000 True Az=41.01 Ze=72.9 Az status=0008 Ze status=0009 10:26:16 Check angles 10:26:16 SkyScan query 10:26:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 10:26:16 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 10:26:16 Check angles 10:26:16 SkyScan query 10:26:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:26:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:26:17 Message to Master queued w/err=0: serial=7859 error=0 10:26:22 Received message from Master: op=Filter serial=7860 10:26:22 Color wheel filter change from 0 to 0 10:26:22 FLIGetFilterPos err=0 currentPosition=0 10:26:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:26:22 Filter is already there-color wheel unchanged 10:26:22 Received message from Master: op=Shutter serial=7861 10:26:22 Shutter LASER close 10:26:22 Received message from Camera: op=State serial=7863 10:26:22 GetSingleValue result=40 Value=cccccccc 10:26:22 SkyScan query 10:26:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:26:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:23 Parameters OK 10:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:23 Set A/D data flow result=40 10:26:23 Set A/D channel type result=40 10:26:23 Set A/D encoding result=40 10:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:23 Set channel filter=0.000000e+000 result=40 10:26:23 Config A/D Result=40 10:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:23 Get A/D filter: -9.255963e+061 result=40 10:26:23 Get A/D value=-858993460 result=40 10:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:26:23 Parameters OK 10:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:26:23 Set A/D data flow result=40 10:26:23 Set A/D channel type result=40 10:26:23 Set A/D encoding result=40 10:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:26:23 Set channel filter=0.000000e+000 result=40 10:26:23 Config A/D Result=40 10:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:26:23 Get A/D filter: -9.255963e+061 result=40 10:26:23 Get A/D value=-858993460 result=40 10:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:26:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:26:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:26:23 Aux= 10:26:23 Message to Camera, serial 7863 queued 10:26:54 Received message from Master: op=PointingHead serial=7870 10:26:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:26:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:26:54 Point started: ret=0 10:26:54 point_skyscan result=0 10:26:55 Check angles 10:26:55 SkyScan query 10:26:55 SkyScan query done: ret=0 az=64.26<-4284 ze=66.54<-7564 Statuses=0009 0008 10:26:55 Msec=0 True Az=64.26 Ze=66.54 Az status=0009 Ze status=0008 10:26:56 Check angles 10:26:56 SkyScan query 10:26:56 SkyScan query done: ret=0 az=82.35<-5490 ze=66.51<-7566 Statuses=0009 0008 10:26:56 Msec=750 True Az=82.35 Ze=66.51 Az status=0009 Ze status=0008 10:26:56 Check angles 10:26:56 SkyScan query 10:26:57 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 10:26:57 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 10:26:57 Check angles 10:26:57 SkyScan query 10:26:58 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 10:26:58 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 10:26:58 Check angles 10:26:58 SkyScan query 10:26:58 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 10:26:58 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 10:26:59 Check angles 10:26:59 SkyScan query 10:26:59 SkyScan query done: ret=0 az=151.98<-10132 ze=66.495<-7567 Statuses=0009 0008 10:26:59 Msec=3750 True Az=151.98 Ze=66.495 Az status=0009 Ze status=0008 10:26:59 Check angles 10:26:59 SkyScan query 10:27:00 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:27:00 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:27:00 Message to Master queued w/err=0: serial=7870 error=0 10:27:05 Received message from Master: op=Filter serial=7871 10:27:05 Color wheel filter change from 0 to 0 10:27:05 FLIGetFilterPos err=0 currentPosition=0 10:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:05 Filter is already there-color wheel unchanged 10:27:05 Received message from Master: op=Shutter serial=7872 10:27:05 Shutter LASER close 10:27:05 Received message from Camera: op=State serial=7874 10:27:05 GetSingleValue result=40 Value=cccccccc 10:27:05 SkyScan query 10:27:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:06 Parameters OK 10:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:06 Set A/D data flow result=40 10:27:06 Set A/D channel type result=40 10:27:06 Set A/D encoding result=40 10:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:06 Set channel filter=0.000000e+000 result=40 10:27:06 Config A/D Result=40 10:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:06 Get A/D filter: -9.255963e+061 result=40 10:27:06 Get A/D value=-858993460 result=40 10:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:06 Parameters OK 10:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:06 Set A/D data flow result=40 10:27:06 Set A/D channel type result=40 10:27:06 Set A/D encoding result=40 10:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:06 Set channel filter=0.000000e+000 result=40 10:27:06 Config A/D Result=40 10:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:06 Get A/D filter: -9.255963e+061 result=40 10:27:06 Get A/D value=-858993460 result=40 10:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:06 Aux= 10:27:06 Message to Camera, serial 7874 queued 10:27:37 Received message from Master: op=PointingHead serial=7881 10:27:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:27:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:27:37 Point started: ret=0 10:27:37 point_skyscan result=0 10:27:38 Check angles 10:27:38 SkyScan query 10:27:38 SkyScan query done: ret=0 az=134.895<-8993 ze=36.6<-9560 Statuses=0009 0009 10:27:38 Msec=0 True Az=134.895 Ze=36.6 Az status=0009 Ze status=0009 10:27:38 Check angles 10:27:38 SkyScan query 10:27:39 SkyScan query done: ret=0 az=117.075<-7805 ze=15.21<-10986 Statuses=0009 0009 10:27:39 Msec=750 True Az=117.075 Ze=15.21 Az status=0009 Ze status=0009 10:27:39 Check angles 10:27:39 SkyScan query 10:27:40 SkyScan query done: ret=0 az=99.735<-6649 ze=-5.745<-12383 Statuses=0009 0009 10:27:40 Msec=1500 True Az=99.735 Ze=-5.745 Az status=0009 Ze status=0009 10:27:40 Check angles 10:27:40 SkyScan query 10:27:41 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.715<-13781 Statuses=0009 0009 10:27:41 Msec=2250 True Az=82.26 Ze=-26.715 Az status=0009 Ze status=0009 10:27:41 Check angles 10:27:41 SkyScan query 10:27:41 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 10:27:41 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 10:27:41 Check angles 10:27:41 SkyScan query 10:27:42 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.535<-14569 Statuses=0009 0008 10:27:42 Msec=3750 True Az=47.385 Ze=-38.535 Az status=0009 Ze status=0008 10:27:42 Check angles 10:27:42 SkyScan query 10:27:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:27:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:27:43 Message to Master queued w/err=0: serial=7881 error=0 10:27:48 Received message from Master: op=Filter serial=7882 10:27:48 Color wheel filter change from 0 to 0 10:27:48 FLIGetFilterPos err=0 currentPosition=0 10:27:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:27:48 Filter is already there-color wheel unchanged 10:27:48 Received message from Master: op=Shutter serial=7883 10:27:48 Shutter LASER close 10:27:48 Received message from Camera: op=State serial=7885 10:27:48 GetSingleValue result=40 Value=cccccccc 10:27:48 SkyScan query 10:27:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:27:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:49 Parameters OK 10:27:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:49 Set A/D data flow result=40 10:27:49 Set A/D channel type result=40 10:27:49 Set A/D encoding result=40 10:27:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:49 Set channel filter=0.000000e+000 result=40 10:27:49 Config A/D Result=40 10:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:49 Get A/D filter: -9.255963e+061 result=40 10:27:49 Get A/D value=-858993460 result=40 10:27:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:27:49 Parameters OK 10:27:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:27:49 Set A/D data flow result=40 10:27:49 Set A/D channel type result=40 10:27:49 Set A/D encoding result=40 10:27:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:27:49 Set channel filter=0.000000e+000 result=40 10:27:49 Config A/D Result=40 10:27:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:27:49 Get A/D filter: -9.255963e+061 result=40 10:27:49 Get A/D value=-858993460 result=40 10:27:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:27:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:27:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:27:49 Aux= 10:27:49 Message to Camera, serial 7885 queued 10:28:19 Received message from Master: op=PointingHead serial=7892 10:28:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:28:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:28:20 Point started: ret=0 10:28:20 point_skyscan result=0 10:28:21 Check angles 10:28:21 SkyScan query 10:28:21 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.535<-16569 Statuses=0009 0009 10:28:21 Msec=0 True Az=64.035 Ze=-68.535 Az status=0009 Ze status=0009 10:28:21 Check angles 10:28:21 SkyScan query 10:28:22 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.505<-17967 Statuses=0009 0009 10:28:22 Msec=750 True Az=81.66 Ze=-89.505 Az status=0009 Ze status=0009 10:28:22 Check angles 10:28:22 SkyScan query 10:28:23 SkyScan query done: ret=0 az=99.555<-6637 ze=-110.865<-19391 Statuses=0009 0009 10:28:23 Msec=1500 True Az=99.555 Ze=-110.865 Az status=0009 Ze status=0009 10:28:23 Check angles 10:28:23 SkyScan query 10:28:23 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.835<-20789 Statuses=0009 0009 10:28:23 Msec=2250 True Az=116.985 Ze=-131.835 Az status=0009 Ze status=0009 10:28:24 Check angles 10:28:24 SkyScan query 10:28:24 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 10:28:24 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 10:28:24 Check angles 10:28:24 SkyScan query 10:28:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:28:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:28:25 Message to Master queued w/err=0: serial=7892 error=0 10:28:30 Received message from Master: op=Filter serial=7893 10:28:30 Color wheel filter change from 0 to 0 10:28:30 FLIGetFilterPos err=0 currentPosition=0 10:28:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:28:30 Filter is already there-color wheel unchanged 10:28:30 Received message from Master: op=Shutter serial=7894 10:28:30 Shutter LASER close 10:28:30 Received message from Camera: op=State serial=7896 10:28:30 GetSingleValue result=40 Value=cccccccc 10:28:30 SkyScan query 10:28:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:28:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:31 Parameters OK 10:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:31 Set A/D data flow result=40 10:28:31 Set A/D channel type result=40 10:28:31 Set A/D encoding result=40 10:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:31 Set channel filter=0.000000e+000 result=40 10:28:31 Config A/D Result=40 10:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:31 Get A/D filter: -9.255963e+061 result=40 10:28:31 Get A/D value=-858993460 result=40 10:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:28:31 Parameters OK 10:28:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:28:31 Set A/D data flow result=40 10:28:31 Set A/D channel type result=40 10:28:31 Set A/D encoding result=40 10:28:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:28:31 Set channel filter=0.000000e+000 result=40 10:28:31 Config A/D Result=40 10:28:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:28:31 Get A/D filter: -9.255963e+061 result=40 10:28:31 Get A/D value=-858993460 result=40 10:28:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:28:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:28:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:28:31 Aux= 10:28:31 Message to Camera, serial 7896 queued 10:29:02 Received message from Master: op=PointingHead serial=7903 10:29:02 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:29:02 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:29:02 Point started: ret=0 10:29:02 point_skyscan result=0 10:29:03 Check angles 10:29:03 SkyScan query 10:29:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 10:29:03 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 10:29:03 Check angles 10:29:03 SkyScan query 10:29:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:29:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:29:04 Message to Master queued w/err=0: serial=7903 error=0 10:29:09 Received message from Master: op=Filter serial=7904 10:29:09 Color wheel filter change from 0 to 0 10:29:09 FLIGetFilterPos err=0 currentPosition=0 10:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:09 Filter is already there-color wheel unchanged 10:29:09 Received message from Master: op=Shutter serial=7905 10:29:09 Shutter LASER open 10:29:09 Received message from Camera: op=State serial=7907 10:29:09 GetSingleValue result=40 Value=cccccccc 10:29:09 SkyScan query 10:29:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:10 Parameters OK 10:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:10 Set A/D data flow result=40 10:29:10 Set A/D channel type result=40 10:29:10 Set A/D encoding result=40 10:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:10 Set channel filter=0.000000e+000 result=40 10:29:10 Config A/D Result=40 10:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:10 Get A/D filter: -9.255963e+061 result=40 10:29:10 Get A/D value=-858993460 result=40 10:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:10 Parameters OK 10:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:10 Set A/D data flow result=40 10:29:10 Set A/D channel type result=40 10:29:10 Set A/D encoding result=40 10:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:10 Set channel filter=0.000000e+000 result=40 10:29:10 Config A/D Result=40 10:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:10 Get A/D filter: -9.255963e+061 result=40 10:29:10 Get A/D value=-858993460 result=40 10:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:10 Aux= 10:29:10 Message to Camera, serial 7907 queued 10:29:12 Received message from Master: op=Shutter serial=7911 10:29:12 Shutter LASER close 10:29:13 Received message from Master: op=PointingHead serial=7915 10:29:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:29:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:29:13 Point started: ret=0 10:29:13 point_skyscan result=0 10:29:14 Check angles 10:29:14 SkyScan query 10:29:15 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.95<-21530 Statuses=0009 0009 10:29:15 Msec=0 True Az=136.215 Ze=-142.95 Az status=0009 Ze status=0009 [UTC 2018-12-4 10:29:15] 10:29:15 Check angles 10:29:15 SkyScan query 10:29:15 SkyScan query done: ret=0 az=155.16<-10344 ze=-120.225<-20015 Statuses=0009 0009 10:29:15 Msec=750 True Az=155.16 Ze=-120.225 Az status=0009 Ze status=0009 10:29:16 Check angles 10:29:16 SkyScan query 10:29:16 SkyScan query done: ret=0 az=171.525<-11435 ze=-100.605<-18707 Statuses=0009 0009 10:29:16 Msec=1500 True Az=171.525 Ze=-100.605 Az status=0009 Ze status=0009 10:29:16 Check angles 10:29:16 SkyScan query 10:29:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.65<-17310 Statuses=0008 0009 10:29:17 Msec=2250 True Az=176.025 Ze=-79.65 Az status=0008 Ze status=0009 10:29:17 Check angles 10:29:17 SkyScan query 10:29:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.695<-15913 Statuses=0008 0009 10:29:18 Msec=3000 True Az=175.995 Ze=-58.695 Az status=0008 Ze status=0009 10:29:18 Check angles 10:29:18 SkyScan query 10:29:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:29:18 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:29:18 Message to Master queued w/err=0: serial=7915 error=0 10:29:23 Received message from Master: op=Filter serial=7916 10:29:23 Color wheel filter change from 0 to 0 10:29:23 FLIGetFilterPos err=0 currentPosition=0 10:29:23 FLIGetStepsRemaining err=0 RemainingSteps=0 10:29:23 Filter is already there-color wheel unchanged 10:29:24 Received message from Master: op=Shutter serial=7917 10:29:24 Shutter LASER close 10:29:24 Received message from Camera: op=State serial=7919 10:29:24 GetSingleValue result=40 Value=cccccccc 10:29:24 SkyScan query 10:29:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:29:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:24 Parameters OK 10:29:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:24 Set A/D data flow result=40 10:29:24 Set A/D channel type result=40 10:29:24 Set A/D encoding result=40 10:29:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:24 Set channel filter=0.000000e+000 result=40 10:29:24 Config A/D Result=40 10:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:24 Get A/D filter: -9.255963e+061 result=40 10:29:24 Get A/D value=-858993460 result=40 10:29:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:29:24 Parameters OK 10:29:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:29:24 Set A/D data flow result=40 10:29:24 Set A/D channel type result=40 10:29:24 Set A/D encoding result=40 10:29:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:29:24 Set channel filter=0.000000e+000 result=40 10:29:24 Config A/D Result=40 10:29:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:29:24 Get A/D filter: -9.255963e+061 result=40 10:29:24 Get A/D value=-858993460 result=40 10:29:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:29:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:29:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:29:24 Aux= 10:29:24 Message to Camera, serial 7919 queued 10:29:55 Received message from Master: op=PointingHead serial=7926 10:29:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:29:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:29:56 Point started: ret=0 10:29:56 point_skyscan result=0 10:29:56 Check angles 10:29:56 SkyScan query 10:29:57 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.99<-13466 Statuses=0009 0009 10:29:57 Msec=0 True Az=153.165 Ze=-21.99 Az status=0009 Ze status=0009 10:29:57 Check angles 10:29:57 SkyScan query 10:29:58 SkyScan query done: ret=0 az=135.75<-9050 ze=-1.035<-12069 Statuses=0009 0009 10:29:58 Msec=750 True Az=135.75 Ze=-1.035 Az status=0009 Ze status=0009 10:29:58 Check angles 10:29:58 SkyScan query 10:29:58 SkyScan query done: ret=0 az=118.2<-7880 ze=19.92<-10672 Statuses=0009 0009 10:29:58 Msec=1500 True Az=118.2 Ze=19.92 Az status=0009 Ze status=0009 10:29:59 Check angles 10:29:59 SkyScan query 10:29:59 SkyScan query done: ret=0 az=100.425<-6695 ze=41.31<-9246 Statuses=0009 0009 10:29:59 Msec=2250 True Az=100.425 Ze=41.31 Az status=0009 Ze status=0009 10:29:59 Check angles 10:29:59 SkyScan query 10:30:00 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 10:30:00 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 10:30:00 Check angles 10:30:00 SkyScan query 10:30:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:30:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:30:01 Message to Master queued w/err=0: serial=7926 error=0 10:30:06 Received message from Master: op=Filter serial=7927 10:30:06 Color wheel filter change from 0 to 0 10:30:06 FLIGetFilterPos err=0 currentPosition=0 10:30:06 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:06 Filter is already there-color wheel unchanged 10:30:06 Received message from Master: op=Shutter serial=7928 10:30:06 Shutter LASER close 10:30:06 Received message from Camera: op=State serial=7930 10:30:06 GetSingleValue result=40 Value=cccccccc 10:30:06 SkyScan query 10:30:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:30:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:06 Parameters OK 10:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:06 Set A/D data flow result=40 10:30:06 Set A/D channel type result=40 10:30:06 Set A/D encoding result=40 10:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:06 Set channel filter=0.000000e+000 result=40 10:30:06 Config A/D Result=40 10:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:06 Get A/D filter: -9.255963e+061 result=40 10:30:06 Get A/D value=-858993460 result=40 10:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:06 Parameters OK 10:30:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:06 Set A/D data flow result=40 10:30:06 Set A/D channel type result=40 10:30:06 Set A/D encoding result=40 10:30:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:06 Set channel filter=0.000000e+000 result=40 10:30:06 Config A/D Result=40 10:30:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:06 Get A/D filter: -9.255963e+061 result=40 10:30:06 Get A/D value=-858993460 result=40 10:30:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:06 Aux= 10:30:06 Message to Camera, serial 7930 queued 10:30:37 Received message from Master: op=PointingHead serial=7937 10:30:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:30:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:30:38 Point started: ret=0 10:30:38 point_skyscan result=0 10:30:38 Check angles 10:30:38 SkyScan query 10:30:39 SkyScan query done: ret=0 az=109.575<-7305 ze=38.49<-9434 Statuses=0009 0008 10:30:39 Msec=0 True Az=109.575 Ze=38.49 Az status=0009 Ze status=0008 10:30:39 Check angles 10:30:39 SkyScan query 10:30:40 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 10:30:40 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 10:30:40 Check angles 10:30:40 SkyScan query 10:30:41 SkyScan query done: ret=0 az=144.465<-9631 ze=38.505<-9433 Statuses=0009 0008 10:30:41 Msec=1500 True Az=144.465 Ze=38.505 Az status=0009 Ze status=0008 10:30:41 Check angles 10:30:41 SkyScan query 10:30:41 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 10:30:41 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 10:30:41 Check angles 10:30:41 SkyScan query 10:30:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:30:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:30:42 Check angles 10:30:42 SkyScan query 10:30:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:30:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:30:43 Message to Master queued w/err=0: serial=7937 error=0 10:30:48 Received message from Master: op=Filter serial=7938 10:30:48 Color wheel filter change from 0 to 0 10:30:48 FLIGetFilterPos err=0 currentPosition=0 10:30:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:30:48 Filter is already there-color wheel unchanged 10:30:48 Received message from Master: op=Shutter serial=7939 10:30:48 Shutter LASER close 10:30:48 Received message from Camera: op=State serial=7941 10:30:48 GetSingleValue result=40 Value=cccccccc 10:30:48 SkyScan query 10:30:49 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:30:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:49 Parameters OK 10:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:49 Set A/D data flow result=40 10:30:49 Set A/D channel type result=40 10:30:49 Set A/D encoding result=40 10:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:49 Set channel filter=0.000000e+000 result=40 10:30:49 Config A/D Result=40 10:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:49 Get A/D filter: -9.255963e+061 result=40 10:30:49 Get A/D value=-858993460 result=40 10:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:30:49 Parameters OK 10:30:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:30:49 Set A/D data flow result=40 10:30:49 Set A/D channel type result=40 10:30:49 Set A/D encoding result=40 10:30:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:30:49 Set channel filter=0.000000e+000 result=40 10:30:49 Config A/D Result=40 10:30:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:30:49 Get A/D filter: -9.255963e+061 result=40 10:30:49 Get A/D value=-858993460 result=40 10:30:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:30:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:30:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:30:49 Aux= 10:30:49 Message to Camera, serial 7941 queued 10:31:19 Received message from Master: op=PointingHead serial=7948 10:31:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:31:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:31:20 Point started: ret=0 10:31:20 point_skyscan result=0 10:31:20 Check angles 10:31:20 SkyScan query 10:31:21 SkyScan query done: ret=0 az=153.24<-10216 ze=8.985<-11401 Statuses=0009 0009 10:31:21 Msec=0 True Az=153.24 Ze=8.985 Az status=0009 Ze status=0009 10:31:21 Check angles 10:31:21 SkyScan query 10:31:22 SkyScan query done: ret=0 az=135.825<-9055 ze=-11.955<-12797 Statuses=0009 0009 10:31:22 Msec=750 True Az=135.825 Ze=-11.955 Az status=0009 Ze status=0009 10:31:22 Check angles 10:31:22 SkyScan query 10:31:23 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.94<-14196 Statuses=0009 0009 10:31:23 Msec=1500 True Az=118.29 Ze=-32.94 Az status=0009 Ze status=0009 10:31:23 Check angles 10:31:23 SkyScan query 10:31:23 SkyScan query done: ret=0 az=100.845<-6723 ze=-51.495<-15433 Statuses=0009 0009 10:31:23 Msec=2250 True Az=100.845 Ze=-51.495 Az status=0009 Ze status=0009 10:31:23 Check angles 10:31:23 SkyScan query 10:31:24 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:31:24 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:31:24 Check angles 10:31:24 SkyScan query 10:31:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 10:31:25 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 10:31:25 Message to Master queued w/err=0: serial=7948 error=0 10:31:30 Received message from Master: op=Filter serial=7949 10:31:30 Color wheel filter change from 0 to 0 10:31:30 FLIGetFilterPos err=0 currentPosition=0 10:31:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:31:30 Filter is already there-color wheel unchanged 10:31:30 Received message from Master: op=Shutter serial=7950 10:31:30 Shutter LASER close 10:31:30 Received message from Camera: op=State serial=7952 10:31:30 GetSingleValue result=40 Value=cccccccc 10:31:30 SkyScan query 10:31:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:31:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:31 Parameters OK 10:31:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:31 Set A/D data flow result=40 10:31:31 Set A/D channel type result=40 10:31:31 Set A/D encoding result=40 10:31:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:31 Set channel filter=0.000000e+000 result=40 10:31:31 Config A/D Result=40 10:31:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:31 Get A/D filter: -9.255963e+061 result=40 10:31:31 Get A/D value=-858993460 result=40 10:31:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:31:31 Parameters OK 10:31:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:31:31 Set A/D data flow result=40 10:31:31 Set A/D channel type result=40 10:31:31 Set A/D encoding result=40 10:31:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:31:31 Set channel filter=0.000000e+000 result=40 10:31:31 Config A/D Result=40 10:31:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:31:31 Get A/D filter: -9.255963e+061 result=40 10:31:31 Get A/D value=-858993460 result=40 10:31:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:31:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:31:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:31:31 Aux= 10:31:31 Message to Camera, serial 7952 queued 10:32:01 Received message from Master: op=PointingHead serial=7959 10:32:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:32:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:32:02 Point started: ret=0 10:32:02 point_skyscan result=0 10:32:03 Check angles 10:32:03 SkyScan query 10:32:03 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.6<-17440 Statuses=0009 0009 10:32:03 Msec=0 True Az=109.23 Ze=-81.6 Az status=0009 Ze status=0009 10:32:03 Check angles 10:32:03 SkyScan query 10:32:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 10:32:04 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 10:32:04 Check angles 10:32:04 SkyScan query 10:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.93<-20262 Statuses=0008 0009 10:32:05 Msec=1500 True Az=112.995 Ze=-123.93 Az status=0008 Ze status=0009 10:32:05 Check angles 10:32:05 SkyScan query 10:32:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.9<-21660 Statuses=0008 0009 10:32:05 Msec=2250 True Az=112.995 Ze=-144.9 Az status=0008 Ze status=0009 10:32:06 Check angles 10:32:06 SkyScan query 10:32:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.275<-23085 Statuses=0008 0009 10:32:06 Msec=3000 True Az=112.995 Ze=-166.275 Az status=0008 Ze status=0009 10:32:06 Check angles 10:32:06 SkyScan query 10:32:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:32:07 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:32:07 Message to Master queued w/err=0: serial=7959 error=0 [UTC 2018-12-4 10:32:09] 10:32:12 Received message from Master: op=Filter serial=7960 10:32:12 Color wheel filter change from 0 to 0 10:32:12 FLIGetFilterPos err=0 currentPosition=0 10:32:12 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:12 Filter is already there-color wheel unchanged 10:32:12 Received message from Master: op=Shutter serial=7961 10:32:12 Shutter LASER open 10:32:12 Received message from Camera: op=State serial=7963 10:32:12 GetSingleValue result=40 Value=cccccccc 10:32:12 SkyScan query 10:32:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:32:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:13 Parameters OK 10:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:13 Set A/D data flow result=40 10:32:13 Set A/D channel type result=40 10:32:13 Set A/D encoding result=40 10:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:13 Set channel filter=0.000000e+000 result=40 10:32:13 Config A/D Result=40 10:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:13 Get A/D filter: -9.255963e+061 result=40 10:32:13 Get A/D value=-858993460 result=40 10:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:13 Parameters OK 10:32:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:13 Set A/D data flow result=40 10:32:13 Set A/D channel type result=40 10:32:13 Set A/D encoding result=40 10:32:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:13 Set channel filter=0.000000e+000 result=40 10:32:13 Config A/D Result=40 10:32:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:13 Get A/D filter: -9.255963e+061 result=40 10:32:13 Get A/D value=-858993460 result=40 10:32:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:13 Aux= 10:32:13 Message to Camera, serial 7963 queued 10:32:15 Received message from Master: op=Shutter serial=7967 10:32:15 Shutter LASER close 10:32:16 Received message from Master: op=PointingHead serial=7971 10:32:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:32:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:32:16 Point started: ret=0 10:32:16 point_skyscan result=0 10:32:17 Check angles 10:32:17 SkyScan query 10:32:17 SkyScan query done: ret=0 az=89.67<-5978 ze=156.945<-1537 Statuses=0009 0009 10:32:17 Msec=0 True Az=89.67 Ze=156.945 Az status=0009 Ze status=0009 10:32:18 Check angles 10:32:18 SkyScan query 10:32:18 SkyScan query done: ret=0 az=72.24<-4816 ze=135.975<-2935 Statuses=0009 0009 10:32:18 Msec=750 True Az=72.24 Ze=135.975 Az status=0009 Ze status=0009 10:32:18 Check angles 10:32:18 SkyScan query 10:32:19 SkyScan query done: ret=0 az=54.48<-3632 ze=114.6<-4360 Statuses=0009 0009 10:32:19 Msec=1500 True Az=54.48 Ze=114.6 Az status=0009 Ze status=0009 10:32:19 Check angles 10:32:19 SkyScan query 10:32:20 SkyScan query done: ret=0 az=40.905<-2727 ze=93.645<-5757 Statuses=0009 0009 10:32:20 Msec=2250 True Az=40.905 Ze=93.645 Az status=0009 Ze status=0009 10:32:20 Check angles 10:32:20 SkyScan query 10:32:20 SkyScan query done: ret=0 az=41.01<-2734 ze=72.675<-7155 Statuses=0008 0009 10:32:20 Msec=3000 True Az=41.01 Ze=72.675 Az status=0008 Ze status=0009 10:32:21 Check angles 10:32:21 SkyScan query 10:32:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.395<-8507 Statuses=0008 0009 10:32:21 Msec=3750 True Az=40.995 Ze=52.395 Az status=0008 Ze status=0009 10:32:21 Check angles 10:32:21 SkyScan query 10:32:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:32:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:32:22 Message to Master queued w/err=0: serial=7971 error=0 10:32:27 Received message from Master: op=Filter serial=7972 10:32:27 Color wheel filter change from 0 to 0 10:32:27 FLIGetFilterPos err=0 currentPosition=0 10:32:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:32:27 Filter is already there-color wheel unchanged 10:32:27 Received message from Master: op=Shutter serial=7973 10:32:27 Shutter LASER close 10:32:27 Received message from Camera: op=State serial=7975 10:32:27 GetSingleValue result=40 Value=cccccccc 10:32:27 SkyScan query 10:32:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:28 Parameters OK 10:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:28 Set A/D data flow result=40 10:32:28 Set A/D channel type result=40 10:32:28 Set A/D encoding result=40 10:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:28 Set channel filter=0.000000e+000 result=40 10:32:28 Config A/D Result=40 10:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:28 Get A/D filter: -9.255963e+061 result=40 10:32:28 Get A/D value=-858993460 result=40 10:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:32:28 Parameters OK 10:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:32:28 Set A/D data flow result=40 10:32:28 Set A/D channel type result=40 10:32:28 Set A/D encoding result=40 10:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:32:28 Set channel filter=0.000000e+000 result=40 10:32:28 Config A/D Result=40 10:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:32:28 Get A/D filter: -9.255963e+061 result=40 10:32:28 Get A/D value=-858993460 result=40 10:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:32:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:32:28 Aux= 10:32:28 Message to Camera, serial 7975 queued 10:32:59 Received message from Master: op=PointingHead serial=7982 10:32:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:32:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:32:59 Point started: ret=0 10:32:59 point_skyscan result=0 10:33:00 Check angles 10:33:00 SkyScan query 10:33:00 SkyScan query done: ret=0 az=64.005<-4267 ze=66.54<-7564 Statuses=0009 0008 10:33:00 Msec=0 True Az=64.005 Ze=66.54 Az status=0009 Ze status=0008 10:33:01 Check angles 10:33:01 SkyScan query 10:33:01 SkyScan query done: ret=0 az=81.9<-5460 ze=66.51<-7566 Statuses=0009 0008 10:33:01 Msec=750 True Az=81.9 Ze=66.51 Az status=0009 Ze status=0008 10:33:01 Check angles 10:33:01 SkyScan query 10:33:02 SkyScan query done: ret=0 az=99.525<-6635 ze=66.495<-7567 Statuses=0009 0008 10:33:02 Msec=1500 True Az=99.525 Ze=66.495 Az status=0009 Ze status=0008 10:33:02 Check angles 10:33:02 SkyScan query 10:33:03 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 10:33:03 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 10:33:03 Check angles 10:33:03 SkyScan query 10:33:03 SkyScan query done: ret=0 az=134.82<-8988 ze=66.495<-7567 Statuses=0009 0008 10:33:03 Msec=3000 True Az=134.82 Ze=66.495 Az status=0009 Ze status=0008 10:33:04 Check angles 10:33:04 SkyScan query 10:33:04 SkyScan query done: ret=0 az=152.01<-10134 ze=66.495<-7567 Statuses=0009 0008 10:33:04 Msec=3750 True Az=152.01 Ze=66.495 Az status=0009 Ze status=0008 10:33:04 Check angles 10:33:04 SkyScan query 10:33:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:33:05 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:33:05 Message to Master queued w/err=0: serial=7982 error=0 10:33:10 Received message from Master: op=Filter serial=7983 10:33:10 Color wheel filter change from 0 to 0 10:33:10 FLIGetFilterPos err=0 currentPosition=0 10:33:10 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:10 Filter is already there-color wheel unchanged 10:33:10 Received message from Master: op=Shutter serial=7984 10:33:10 Shutter LASER close 10:33:10 Received message from Camera: op=State serial=7986 10:33:10 GetSingleValue result=40 Value=cccccccc 10:33:10 SkyScan query 10:33:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:33:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:11 Parameters OK 10:33:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:11 Set A/D data flow result=40 10:33:11 Set A/D channel type result=40 10:33:11 Set A/D encoding result=40 10:33:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:11 Set channel filter=0.000000e+000 result=40 10:33:11 Config A/D Result=40 10:33:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:11 Get A/D filter: -9.255963e+061 result=40 10:33:11 Get A/D value=-858993460 result=40 10:33:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:11 Parameters OK 10:33:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:11 Set A/D data flow result=40 10:33:11 Set A/D channel type result=40 10:33:11 Set A/D encoding result=40 10:33:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:11 Set channel filter=0.000000e+000 result=40 10:33:11 Config A/D Result=40 10:33:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:11 Get A/D filter: -9.255963e+061 result=40 10:33:11 Get A/D value=-858993460 result=40 10:33:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:11 Aux= 10:33:11 Message to Camera, serial 7986 queued 10:33:42 Received message from Master: op=PointingHead serial=7993 10:33:42 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:33:42 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:33:42 Point started: ret=0 10:33:42 point_skyscan result=0 10:33:43 Check angles 10:33:43 SkyScan query 10:33:43 SkyScan query done: ret=0 az=135.18<-9012 ze=36.84<-9544 Statuses=0009 0009 10:33:43 Msec=0 True Az=135.18 Ze=36.84 Az status=0009 Ze status=0009 10:33:43 Check angles 10:33:43 SkyScan query 10:33:44 SkyScan query done: ret=0 az=117.63<-7842 ze=15.87<-10942 Statuses=0009 0009 10:33:44 Msec=750 True Az=117.63 Ze=15.87 Az status=0009 Ze status=0009 10:33:44 Check angles 10:33:44 SkyScan query 10:33:45 SkyScan query done: ret=0 az=100.245<-6683 ze=-5.085<-12339 Statuses=0009 0009 10:33:45 Msec=1500 True Az=100.245 Ze=-5.085 Az status=0009 Ze status=0009 10:33:45 Check angles 10:33:45 SkyScan query 10:33:45 SkyScan query done: ret=0 az=82.725<-5515 ze=-26.055<-13737 Statuses=0009 0009 10:33:45 Msec=2250 True Az=82.725 Ze=-26.055 Az status=0009 Ze status=0009 10:33:46 Check angles 10:33:46 SkyScan query 10:33:46 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 10:33:46 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 10:33:46 Check angles 10:33:46 SkyScan query 10:33:47 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.535<-14569 Statuses=0009 0008 10:33:47 Msec=3750 True Az=47.37 Ze=-38.535 Az status=0009 Ze status=0008 10:33:47 Check angles 10:33:47 SkyScan query 10:33:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:33:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:33:48 Message to Master queued w/err=0: serial=7993 error=0 10:33:53 Received message from Master: op=Filter serial=7994 10:33:53 Color wheel filter change from 0 to 0 10:33:53 FLIGetFilterPos err=0 currentPosition=0 10:33:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:33:53 Filter is already there-color wheel unchanged 10:33:53 Received message from Master: op=Shutter serial=7995 10:33:53 Shutter LASER close 10:33:53 Received message from Camera: op=State serial=7997 10:33:53 GetSingleValue result=40 Value=cccccccc 10:33:53 SkyScan query 10:33:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:33:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:54 Parameters OK 10:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:54 Set A/D data flow result=40 10:33:54 Set A/D channel type result=40 10:33:54 Set A/D encoding result=40 10:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:54 Set channel filter=0.000000e+000 result=40 10:33:54 Config A/D Result=40 10:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:54 Get A/D filter: -9.255963e+061 result=40 10:33:54 Get A/D value=-858993460 result=40 10:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:33:54 Parameters OK 10:33:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:33:54 Set A/D data flow result=40 10:33:54 Set A/D channel type result=40 10:33:54 Set A/D encoding result=40 10:33:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:33:54 Set channel filter=0.000000e+000 result=40 10:33:54 Config A/D Result=40 10:33:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:33:54 Get A/D filter: -9.255963e+061 result=40 10:33:54 Get A/D value=-858993460 result=40 10:33:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:33:54 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:33:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:33:54 Aux= 10:33:54 Message to Camera, serial 7997 queued 10:34:24 Received message from Master: op=PointingHead serial=8004 10:34:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:34:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:34:25 Point started: ret=0 10:34:25 point_skyscan result=0 10:34:25 Check angles 10:34:25 SkyScan query 10:34:26 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.61<-16574 Statuses=0009 0009 10:34:26 Msec=0 True Az=64.185 Ze=-68.61 Az status=0009 Ze status=0009 10:34:26 Check angles 10:34:26 SkyScan query 10:34:27 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.58<-17972 Statuses=0009 0009 10:34:27 Msec=750 True Az=81.855 Ze=-89.58 Az status=0009 Ze status=0009 10:34:27 Check angles 10:34:27 SkyScan query 10:34:28 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.52<-19368 Statuses=0009 0009 10:34:28 Msec=1500 True Az=99.27 Ze=-110.52 Az status=0009 Ze status=0009 10:34:28 Check angles 10:34:28 SkyScan query 10:34:28 SkyScan query done: ret=0 az=116.655<-7777 ze=-131.46<-20764 Statuses=0009 0009 10:34:28 Msec=2250 True Az=116.655 Ze=-131.46 Az status=0009 Ze status=0009 10:34:28 Check angles 10:34:28 SkyScan query 10:34:29 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.525<-21435 Statuses=0009 0008 10:34:29 Msec=3000 True Az=130.965 Ze=-141.525 Az status=0009 Ze status=0008 10:34:29 Check angles 10:34:29 SkyScan query 10:34:30 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.525<-21435 Statuses=0008 0008 10:34:30 Msec=3750 True Az=130.98 Ze=-141.525 Az status=0008 Ze status=0008 10:34:30 Message to Master queued w/err=0: serial=8004 error=0 10:34:35 Received message from Master: op=Filter serial=8005 10:34:35 Color wheel filter change from 0 to 0 10:34:35 FLIGetFilterPos err=0 currentPosition=0 10:34:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:34:35 Filter is already there-color wheel unchanged 10:34:35 Received message from Master: op=Shutter serial=8006 10:34:35 Shutter LASER close 10:34:35 Received message from Camera: op=State serial=8008 10:34:35 GetSingleValue result=40 Value=cccccccc 10:34:35 SkyScan query 10:34:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:34:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:36 Parameters OK 10:34:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:36 Set A/D data flow result=40 10:34:36 Set A/D channel type result=40 10:34:36 Set A/D encoding result=40 10:34:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:36 Set channel filter=0.000000e+000 result=40 10:34:36 Config A/D Result=40 10:34:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:36 Get A/D filter: -9.255963e+061 result=40 10:34:36 Get A/D value=-858993460 result=40 10:34:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:34:36 Parameters OK 10:34:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:34:36 Set A/D data flow result=40 10:34:36 Set A/D channel type result=40 10:34:36 Set A/D encoding result=40 10:34:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:34:36 Set channel filter=0.000000e+000 result=40 10:34:36 Config A/D Result=40 10:34:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:34:36 Get A/D filter: -9.255963e+061 result=40 10:34:36 Get A/D value=-858993460 result=40 10:34:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:34:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:34:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:34:36 Aux= 10:34:36 Message to Camera, serial 8008 queued 10:35:06 Received message from Master: op=PointingHead serial=8015 10:35:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:35:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:35:07 Point started: ret=0 10:35:07 point_skyscan result=0 10:35:08 Check angles 10:35:08 SkyScan query 10:35:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0009 0009 10:35:08 Msec=0 True Az=113.01 Ze=-171.495 Az status=0009 Ze status=0009 10:35:08 Check angles 10:35:08 SkyScan query 10:35:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:35:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:35:09 Message to Master queued w/err=0: serial=8015 error=0 10:35:14 Received message from Master: op=Filter serial=8016 10:35:14 Color wheel filter change from 0 to 0 10:35:14 FLIGetFilterPos err=0 currentPosition=0 10:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:14 Filter is already there-color wheel unchanged 10:35:14 Received message from Master: op=Shutter serial=8017 10:35:14 Shutter LASER open 10:35:14 Received message from Camera: op=State serial=8019 10:35:14 GetSingleValue result=40 Value=cccccccc 10:35:14 SkyScan query 10:35:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:35:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:15 Parameters OK 10:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:15 Set A/D data flow result=40 10:35:15 Set A/D channel type result=40 10:35:15 Set A/D encoding result=40 10:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:15 Set channel filter=0.000000e+000 result=40 10:35:15 Config A/D Result=40 10:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:15 Get A/D filter: -9.255963e+061 result=40 10:35:15 Get A/D value=-858993460 result=40 10:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:15 Parameters OK 10:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:15 Set A/D data flow result=40 10:35:15 Set A/D channel type result=40 10:35:15 Set A/D encoding result=40 10:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:15 Set channel filter=0.000000e+000 result=40 10:35:15 Config A/D Result=40 10:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:15 Get A/D filter: -9.255963e+061 result=40 10:35:15 Get A/D value=-858993460 result=40 10:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:15 Aux= 10:35:15 Message to Camera, serial 8019 queued 10:35:17 Received message from Master: op=Shutter serial=8023 10:35:17 Shutter LASER close 10:35:18 Received message from Master: op=PointingHead serial=8027 10:35:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:35:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:35:18 Point started: ret=0 10:35:18 point_skyscan result=0 10:35:19 Check angles 10:35:19 SkyScan query 10:35:20 SkyScan query done: ret=0 az=135.945<-9063 ze=-143.04<-21536 Statuses=0009 0009 10:35:20 Msec=0 True Az=135.945 Ze=-143.04 Az status=0009 Ze status=0009 10:35:20 Check angles 10:35:20 SkyScan query 10:35:20 SkyScan query done: ret=0 az=153.255<-10217 ze=-122.46<-20164 Statuses=0009 0009 10:35:20 Msec=750 True Az=153.255 Ze=-122.46 Az status=0009 Ze status=0009 10:35:21 Check angles 10:35:21 SkyScan query 10:35:21 SkyScan query done: ret=0 az=170.625<-11375 ze=-101.565<-18771 Statuses=0009 0009 10:35:21 Msec=1500 True Az=170.625 Ze=-101.565 Az status=0009 Ze status=0009 10:35:21 Check angles 10:35:21 SkyScan query 10:35:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.61<-17374 Statuses=0008 0009 10:35:22 Msec=2250 True Az=176.025 Ze=-80.61 Az status=0008 Ze status=0009 10:35:22 Check angles 10:35:22 SkyScan query 10:35:23 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.655<-15977 Statuses=0008 0009 10:35:23 Msec=3000 True Az=176.01 Ze=-59.655 Az status=0008 Ze status=0009 10:35:23 Check angles 10:35:23 SkyScan query 10:35:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 10:35:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 10:35:23 Message to Master queued w/err=0: serial=8027 error=0 10:35:28 Received message from Master: op=Filter serial=8028 10:35:28 Color wheel filter change from 0 to 0 10:35:28 FLIGetFilterPos err=0 currentPosition=0 10:35:28 FLIGetStepsRemaining err=0 RemainingSteps=0 10:35:28 Filter is already there-color wheel unchanged 10:35:29 Received message from Master: op=Shutter serial=8029 10:35:29 Shutter LASER close 10:35:29 Received message from Camera: op=State serial=8031 10:35:29 GetSingleValue result=40 Value=cccccccc 10:35:29 SkyScan query 10:35:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:35:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:29 Parameters OK 10:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:29 Set A/D data flow result=40 10:35:29 Set A/D channel type result=40 10:35:29 Set A/D encoding result=40 10:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:29 Set channel filter=0.000000e+000 result=40 10:35:29 Config A/D Result=40 10:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:29 Get A/D filter: -9.255963e+061 result=40 10:35:29 Get A/D value=-858993460 result=40 10:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:35:29 Parameters OK 10:35:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:35:29 Set A/D data flow result=40 10:35:29 Set A/D channel type result=40 10:35:29 Set A/D encoding result=40 10:35:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:35:29 Set channel filter=0.000000e+000 result=40 10:35:29 Config A/D Result=40 10:35:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:35:29 Get A/D filter: -9.255963e+061 result=40 10:35:29 Get A/D value=-858993460 result=40 10:35:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:35:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:35:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:35:29 Aux= 10:35:29 Message to Camera, serial 8031 queued 10:36:00 Received message from Master: op=PointingHead serial=8038 10:36:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:36:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:36:00 Point started: ret=0 10:36:00 point_skyscan result=0 10:36:01 Check angles 10:36:01 SkyScan query 10:36:02 SkyScan query done: ret=0 az=152.715<-10181 ze=-21.375<-13425 Statuses=0009 0009 10:36:02 Msec=0 True Az=152.715 Ze=-21.375 Az status=0009 Ze status=0009 10:36:02 Check angles 10:36:02 SkyScan query 10:36:03 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.405<-12027 Statuses=0009 0009 10:36:03 Msec=750 True Az=135.195 Ze=-0.405 Az status=0009 Ze status=0009 10:36:03 Check angles 10:36:03 SkyScan query 10:36:03 SkyScan query done: ret=0 az=117.315<-7821 ze=21.03<-10598 Statuses=0009 0009 10:36:03 Msec=1500 True Az=117.315 Ze=21.03 Az status=0009 Ze status=0009 10:36:04 Check angles 10:36:04 SkyScan query 10:36:04 SkyScan query done: ret=0 az=99.975<-6665 ze=41.925<-9205 Statuses=0009 0009 10:36:04 Msec=2250 True Az=99.975 Ze=41.925 Az status=0009 Ze status=0009 10:36:04 Check angles 10:36:04 SkyScan query 10:36:05 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 10:36:05 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 10:36:05 Check angles 10:36:05 SkyScan query 10:36:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:36:06 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:36:06 Message to Master queued w/err=0: serial=8038 error=0 10:36:11 Received message from Master: op=Filter serial=8039 10:36:11 Color wheel filter change from 0 to 0 10:36:11 FLIGetFilterPos err=0 currentPosition=0 10:36:11 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:11 Filter is already there-color wheel unchanged 10:36:11 Received message from Master: op=Shutter serial=8040 10:36:11 Shutter LASER close 10:36:11 Received message from Camera: op=State serial=8042 10:36:11 GetSingleValue result=40 Value=cccccccc 10:36:11 SkyScan query 10:36:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:36:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:11 Parameters OK 10:36:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:11 Set A/D data flow result=40 10:36:11 Set A/D channel type result=40 10:36:11 Set A/D encoding result=40 10:36:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:11 Set channel filter=0.000000e+000 result=40 10:36:11 Config A/D Result=40 10:36:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:11 Get A/D filter: -9.255963e+061 result=40 10:36:11 Get A/D value=-858993460 result=40 10:36:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:11 Parameters OK 10:36:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:11 Set A/D data flow result=40 10:36:11 Set A/D channel type result=40 10:36:11 Set A/D encoding result=40 10:36:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:11 Set channel filter=0.000000e+000 result=40 10:36:11 Config A/D Result=40 10:36:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:11 Get A/D filter: -9.255963e+061 result=40 10:36:11 Get A/D value=-858993460 result=40 10:36:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:11 Aux= 10:36:11 Message to Camera, serial 8042 queued 10:36:42 Received message from Master: op=PointingHead serial=8049 10:36:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:36:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:36:43 Point started: ret=0 10:36:43 point_skyscan result=0 10:36:43 Check angles 10:36:43 SkyScan query 10:36:44 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 10:36:44 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 10:36:44 Check angles 10:36:44 SkyScan query 10:36:45 SkyScan query done: ret=0 az=126.45<-8430 ze=38.505<-9433 Statuses=0009 0008 10:36:45 Msec=750 True Az=126.45 Ze=38.505 Az status=0009 Ze status=0008 10:36:45 Check angles 10:36:45 SkyScan query 10:36:45 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 10:36:45 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 10:36:46 Check angles 10:36:46 SkyScan query 10:36:46 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 10:36:46 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 10:36:46 Check angles 10:36:46 SkyScan query 10:36:47 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 10:36:47 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 10:36:47 Check angles 10:36:47 SkyScan query 10:36:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:36:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:36:48 Message to Master queued w/err=0: serial=8049 error=0 10:36:53 Received message from Master: op=Filter serial=8050 10:36:53 Color wheel filter change from 0 to 0 10:36:53 FLIGetFilterPos err=0 currentPosition=0 10:36:53 FLIGetStepsRemaining err=0 RemainingSteps=0 10:36:53 Filter is already there-color wheel unchanged 10:36:53 Received message from Master: op=Shutter serial=8051 10:36:53 Shutter LASER close 10:36:53 Received message from Camera: op=State serial=8053 10:36:53 GetSingleValue result=40 Value=cccccccc 10:36:53 SkyScan query 10:36:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:36:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:53 Parameters OK 10:36:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:53 Set A/D data flow result=40 10:36:53 Set A/D channel type result=40 10:36:53 Set A/D encoding result=40 10:36:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:53 Set channel filter=0.000000e+000 result=40 10:36:53 Config A/D Result=40 10:36:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:53 Get A/D filter: -9.255963e+061 result=40 10:36:53 Get A/D value=-858993460 result=40 10:36:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:36:53 Parameters OK 10:36:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:36:53 Set A/D data flow result=40 10:36:53 Set A/D channel type result=40 10:36:53 Set A/D encoding result=40 10:36:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:36:53 Set channel filter=0.000000e+000 result=40 10:36:53 Config A/D Result=40 10:36:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:36:53 Get A/D filter: -9.255963e+061 result=40 10:36:53 Get A/D value=-858993460 result=40 10:36:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:36:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:36:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:36:53 Aux= 10:36:53 Message to Camera, serial 8053 queued 10:37:24 Received message from Master: op=PointingHead serial=8060 10:37:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:37:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:37:25 Point started: ret=0 10:37:25 point_skyscan result=0 10:37:25 Check angles 10:37:25 SkyScan query 10:37:26 SkyScan query done: ret=0 az=152.775<-10185 ze=8.445<-11437 Statuses=0009 0009 10:37:26 Msec=0 True Az=152.775 Ze=8.445 Az status=0009 Ze status=0009 10:37:26 Check angles 10:37:26 SkyScan query 10:37:27 SkyScan query done: ret=0 az=134.985<-8999 ze=-12.945<-12863 Statuses=0009 0009 10:37:27 Msec=750 True Az=134.985 Ze=-12.945 Az status=0009 Ze status=0009 10:37:27 Check angles 10:37:27 SkyScan query 10:37:28 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.855<-14257 Statuses=0009 0009 10:37:28 Msec=1500 True Az=117.495 Ze=-33.855 Az status=0009 Ze status=0009 10:37:28 Check angles 10:37:28 SkyScan query 10:37:28 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.555<-15437 Statuses=0009 0009 10:37:28 Msec=2250 True Az=100.125 Ze=-51.555 Az status=0009 Ze status=0009 10:37:28 Check angles 10:37:28 SkyScan query 10:37:29 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:37:29 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:37:29 Check angles 10:37:29 SkyScan query 10:37:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 10:37:30 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 10:37:30 Message to Master queued w/err=0: serial=8060 error=0 10:37:35 Received message from Master: op=Filter serial=8061 10:37:35 Color wheel filter change from 0 to 0 10:37:35 FLIGetFilterPos err=0 currentPosition=0 10:37:35 FLIGetStepsRemaining err=0 RemainingSteps=0 10:37:35 Filter is already there-color wheel unchanged 10:37:35 Received message from Master: op=Shutter serial=8062 10:37:35 Shutter LASER close 10:37:35 Received message from Camera: op=State serial=8064 10:37:35 GetSingleValue result=40 Value=cccccccc 10:37:35 SkyScan query 10:37:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:37:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:36 Parameters OK 10:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:36 Set A/D data flow result=40 10:37:36 Set A/D channel type result=40 10:37:36 Set A/D encoding result=40 10:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:36 Set channel filter=0.000000e+000 result=40 10:37:36 Config A/D Result=40 10:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:36 Get A/D filter: -9.255963e+061 result=40 10:37:36 Get A/D value=-858993460 result=40 10:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:37:36 Parameters OK 10:37:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:37:36 Set A/D data flow result=40 10:37:36 Set A/D channel type result=40 10:37:36 Set A/D encoding result=40 10:37:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:37:36 Set channel filter=0.000000e+000 result=40 10:37:36 Config A/D Result=40 10:37:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:37:36 Get A/D filter: -9.255963e+061 result=40 10:37:36 Get A/D value=-858993460 result=40 10:37:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:37:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:37:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:37:36 Aux= 10:37:36 Message to Camera, serial 8064 queued 10:38:06 Received message from Master: op=PointingHead serial=8071 10:38:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:38:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:38:07 Point started: ret=0 10:38:07 point_skyscan result=0 10:38:08 Check angles 10:38:08 SkyScan query 10:38:08 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.63<-17442 Statuses=0009 0009 10:38:08 Msec=0 True Az=109.23 Ze=-81.63 Az status=0009 Ze status=0009 10:38:08 Check angles 10:38:08 SkyScan query 10:38:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 10:38:09 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 10:38:09 Check angles 10:38:09 SkyScan query 10:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.945<-20263 Statuses=0008 0009 10:38:10 Msec=1500 True Az=112.995 Ze=-123.945 Az status=0008 Ze status=0009 10:38:10 Check angles 10:38:10 SkyScan query 10:38:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.945<-21663 Statuses=0008 0009 10:38:10 Msec=2250 True Az=112.995 Ze=-144.945 Az status=0008 Ze status=0009 10:38:11 Check angles 10:38:11 SkyScan query 10:38:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 10:38:11 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 10:38:11 Check angles 10:38:11 SkyScan query 10:38:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:38:12 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:38:12 Message to Master queued w/err=0: serial=8071 error=0 10:38:17 Received message from Master: op=Filter serial=8072 10:38:17 Color wheel filter change from 0 to 0 10:38:17 FLIGetFilterPos err=0 currentPosition=0 10:38:17 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:17 Filter is already there-color wheel unchanged 10:38:17 Received message from Master: op=Shutter serial=8073 10:38:17 Shutter LASER open 10:38:17 Received message from Camera: op=State serial=8075 10:38:17 GetSingleValue result=40 Value=cccccccc 10:38:17 SkyScan query 10:38:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:38:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:18 Parameters OK 10:38:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:18 Set A/D data flow result=40 10:38:18 Set A/D channel type result=40 10:38:18 Set A/D encoding result=40 10:38:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:18 Set channel filter=0.000000e+000 result=40 10:38:18 Config A/D Result=40 10:38:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:18 Get A/D filter: -9.255963e+061 result=40 10:38:18 Get A/D value=-858993460 result=40 10:38:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:18 Parameters OK 10:38:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:18 Set A/D data flow result=40 10:38:18 Set A/D channel type result=40 10:38:18 Set A/D encoding result=40 10:38:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:18 Set channel filter=0.000000e+000 result=40 10:38:18 Config A/D Result=40 10:38:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:18 Get A/D filter: -9.255963e+061 result=40 10:38:18 Get A/D value=-858993460 result=40 10:38:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:18 Aux= 10:38:18 Message to Camera, serial 8075 queued 10:38:20 Received message from Master: op=Shutter serial=8079 10:38:20 Shutter LASER close 10:38:21 Received message from Master: op=PointingHead serial=8083 10:38:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:38:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:38:21 Point started: ret=0 10:38:21 point_skyscan result=0 10:38:22 Check angles 10:38:22 SkyScan query 10:38:22 SkyScan query done: ret=0 az=89.475<-5965 ze=156.69<-1554 Statuses=0009 0009 10:38:22 Msec=0 True Az=89.475 Ze=156.69 Az status=0009 Ze status=0009 10:38:23 Check angles 10:38:23 SkyScan query 10:38:23 SkyScan query done: ret=0 az=72.075<-4805 ze=135.765<-2949 Statuses=0009 0009 10:38:23 Msec=750 True Az=72.075 Ze=135.765 Az status=0009 Ze status=0009 10:38:23 Check angles 10:38:23 SkyScan query 10:38:24 SkyScan query done: ret=0 az=54.72<-3648 ze=114.825<-4345 Statuses=0009 0009 10:38:24 Msec=1500 True Az=54.72 Ze=114.825 Az status=0009 Ze status=0009 10:38:24 Check angles 10:38:24 SkyScan query 10:38:25 SkyScan query done: ret=0 az=40.875<-2725 ze=93.87<-5742 Statuses=0009 0009 10:38:25 Msec=2250 True Az=40.875 Ze=93.87 Az status=0009 Ze status=0009 10:38:25 Check angles 10:38:25 SkyScan query 10:38:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.885<-7141 Statuses=0008 0009 10:38:25 Msec=3000 True Az=40.995 Ze=72.885 Az status=0008 Ze status=0009 10:38:26 Check angles 10:38:26 SkyScan query 10:38:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 10:38:26 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 10:38:26 Check angles 10:38:26 SkyScan query 10:38:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:38:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:38:27 Message to Master queued w/err=0: serial=8083 error=0 10:38:32 Received message from Master: op=Filter serial=8084 10:38:32 Color wheel filter change from 0 to 0 10:38:32 FLIGetFilterPos err=0 currentPosition=0 10:38:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:38:32 Filter is already there-color wheel unchanged 10:38:32 Received message from Master: op=Shutter serial=8085 10:38:32 Shutter LASER close 10:38:32 Received message from Camera: op=State serial=8087 10:38:32 GetSingleValue result=40 Value=cccccccc 10:38:32 SkyScan query 10:38:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:38:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:33 Parameters OK 10:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:33 Set A/D data flow result=40 10:38:33 Set A/D channel type result=40 10:38:33 Set A/D encoding result=40 10:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:33 Set channel filter=0.000000e+000 result=40 10:38:33 Config A/D Result=40 10:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:33 Get A/D filter: -9.255963e+061 result=40 10:38:33 Get A/D value=-858993460 result=40 10:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:38:33 Parameters OK 10:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:38:33 Set A/D data flow result=40 10:38:33 Set A/D channel type result=40 10:38:33 Set A/D encoding result=40 10:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:38:33 Set channel filter=0.000000e+000 result=40 10:38:33 Config A/D Result=40 10:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:38:33 Get A/D filter: -9.255963e+061 result=40 10:38:33 Get A/D value=-858993460 result=40 10:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:38:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:38:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:38:33 Aux= 10:38:33 Message to Camera, serial 8087 queued 10:39:04 Received message from Master: op=PointingHead serial=8094 10:39:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:39:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:39:04 Point started: ret=0 10:39:04 point_skyscan result=0 10:39:05 Check angles 10:39:05 SkyScan query 10:39:05 SkyScan query done: ret=0 az=63.825<-4255 ze=66.54<-7564 Statuses=0009 0008 10:39:05 Msec=0 True Az=63.825 Ze=66.54 Az status=0009 Ze status=0008 10:39:05 Check angles 10:39:05 SkyScan query 10:39:06 SkyScan query done: ret=0 az=81.165<-5411 ze=66.51<-7566 Statuses=0009 0008 10:39:06 Msec=750 True Az=81.165 Ze=66.51 Az status=0009 Ze status=0008 10:39:06 Check angles 10:39:06 SkyScan query 10:39:07 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 10:39:07 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 10:39:07 Check angles 10:39:07 SkyScan query 10:39:08 SkyScan query done: ret=0 az=116.34<-7756 ze=66.495<-7567 Statuses=0009 0008 10:39:08 Msec=2250 True Az=116.34 Ze=66.495 Az status=0009 Ze status=0008 10:39:08 Check angles 10:39:08 SkyScan query 10:39:08 SkyScan query done: ret=0 az=133.725<-8915 ze=66.495<-7567 Statuses=0009 0008 10:39:08 Msec=3000 True Az=133.725 Ze=66.495 Az status=0009 Ze status=0008 10:39:08 Check angles 10:39:08 SkyScan query 10:39:09 SkyScan query done: ret=0 az=151.155<-10077 ze=66.495<-7567 Statuses=0009 0008 10:39:09 Msec=3750 True Az=151.155 Ze=66.495 Az status=0009 Ze status=0008 10:39:09 Check angles 10:39:09 SkyScan query 10:39:10 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:39:10 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:39:10 Message to Master queued w/err=0: serial=8094 error=0 10:39:15 Received message from Master: op=Filter serial=8095 10:39:15 Color wheel filter change from 0 to 0 10:39:15 FLIGetFilterPos err=0 currentPosition=0 10:39:15 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:15 Filter is already there-color wheel unchanged 10:39:15 Received message from Master: op=Shutter serial=8096 10:39:15 Shutter LASER close 10:39:15 Received message from Camera: op=State serial=8098 10:39:15 GetSingleValue result=40 Value=cccccccc 10:39:15 SkyScan query 10:39:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:39:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:16 Parameters OK 10:39:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:16 Set A/D data flow result=40 10:39:16 Set A/D channel type result=40 10:39:16 Set A/D encoding result=40 10:39:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:16 Set channel filter=0.000000e+000 result=40 10:39:16 Config A/D Result=40 10:39:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:16 Get A/D filter: -9.255963e+061 result=40 10:39:16 Get A/D value=-858993460 result=40 10:39:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:16 Parameters OK 10:39:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:16 Set A/D data flow result=40 10:39:16 Set A/D channel type result=40 10:39:16 Set A/D encoding result=40 10:39:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:16 Set channel filter=0.000000e+000 result=40 10:39:16 Config A/D Result=40 10:39:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:16 Get A/D filter: -9.255963e+061 result=40 10:39:16 Get A/D value=-858993460 result=40 10:39:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:16 Aux= 10:39:16 Message to Camera, serial 8098 queued 10:39:46 Received message from Master: op=PointingHead serial=8105 10:39:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:39:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:39:47 Point started: ret=0 10:39:47 point_skyscan result=0 10:39:48 Check angles 10:39:48 SkyScan query 10:39:48 SkyScan query done: ret=0 az=134.805<-8987 ze=36.495<-9567 Statuses=0009 0009 10:39:48 Msec=0 True Az=134.805 Ze=36.495 Az status=0009 Ze status=0009 10:39:48 Check angles 10:39:48 SkyScan query 10:39:49 SkyScan query done: ret=0 az=117.285<-7819 ze=15.57<-10962 Statuses=0009 0009 10:39:49 Msec=750 True Az=117.285 Ze=15.57 Az status=0009 Ze status=0009 10:39:49 Check angles 10:39:49 SkyScan query 10:39:50 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.445<-12363 Statuses=0009 0009 10:39:50 Msec=1500 True Az=99.885 Ze=-5.445 Az status=0009 Ze status=0009 10:39:50 Check angles 10:39:50 SkyScan query 10:39:50 SkyScan query done: ret=0 az=82.065<-5471 ze=-26.82<-13788 Statuses=0009 0009 10:39:50 Msec=2250 True Az=82.065 Ze=-26.82 Az status=0009 Ze status=0009 10:39:51 Check angles 10:39:51 SkyScan query 10:39:51 SkyScan query done: ret=0 az=64.17<-4278 ze=-38.565<-14571 Statuses=0009 0008 10:39:51 Msec=3000 True Az=64.17 Ze=-38.565 Az status=0009 Ze status=0008 10:39:51 Check angles 10:39:51 SkyScan query 10:39:52 SkyScan query done: ret=0 az=46.665<-3111 ze=-38.52<-14568 Statuses=0009 0008 10:39:52 Msec=3750 True Az=46.665 Ze=-38.52 Az status=0009 Ze status=0008 10:39:52 Check angles 10:39:52 SkyScan query 10:39:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:39:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:39:53 Message to Master queued w/err=0: serial=8105 error=0 10:39:58 Received message from Master: op=Filter serial=8106 10:39:58 Color wheel filter change from 0 to 0 10:39:58 FLIGetFilterPos err=0 currentPosition=0 10:39:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:39:58 Filter is already there-color wheel unchanged 10:39:58 Received message from Master: op=Shutter serial=8107 10:39:58 Shutter LASER close 10:39:58 Received message from Camera: op=State serial=8109 10:39:58 GetSingleValue result=40 Value=cccccccc 10:39:58 SkyScan query 10:39:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:39:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:58 Parameters OK 10:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:58 Set A/D data flow result=40 10:39:58 Set A/D channel type result=40 10:39:58 Set A/D encoding result=40 10:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:58 Set channel filter=0.000000e+000 result=40 10:39:58 Config A/D Result=40 10:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:58 Get A/D filter: -9.255963e+061 result=40 10:39:58 Get A/D value=-858993460 result=40 10:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:39:58 Parameters OK 10:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:39:58 Set A/D data flow result=40 10:39:58 Set A/D channel type result=40 10:39:58 Set A/D encoding result=40 10:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:39:58 Set channel filter=0.000000e+000 result=40 10:39:58 Config A/D Result=40 10:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:39:58 Get A/D filter: -9.255963e+061 result=40 10:39:58 Get A/D value=-858993460 result=40 10:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:39:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:39:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:39:58 Aux= 10:39:58 Message to Camera, serial 8109 queued 10:40:29 Received message from Master: op=PointingHead serial=8116 10:40:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:40:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:40:30 Point started: ret=0 10:40:30 point_skyscan result=0 10:40:30 Check angles 10:40:30 SkyScan query 10:40:31 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.43<-16562 Statuses=0009 0009 10:40:31 Msec=0 True Az=63.945 Ze=-68.43 Az status=0009 Ze status=0009 10:40:31 Check angles 10:40:31 SkyScan query 10:40:32 SkyScan query done: ret=0 az=81.615<-5441 ze=-89.4<-17960 Statuses=0009 0009 10:40:32 Msec=750 True Az=81.615 Ze=-89.4 Az status=0009 Ze status=0009 10:40:32 Check angles 10:40:32 SkyScan query 10:40:32 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.34<-19356 Statuses=0009 0009 10:40:32 Msec=1500 True Az=98.925 Ze=-110.34 Az status=0009 Ze status=0009 10:40:33 Check angles 10:40:33 SkyScan query 10:40:33 SkyScan query done: ret=0 az=116.4<-7760 ze=-131.295<-20753 Statuses=0009 0009 10:40:33 Msec=2250 True Az=116.4 Ze=-131.295 Az status=0009 Ze status=0009 [UTC 2018-12-4 10:40:33] 10:40:33 Check angles 10:40:33 SkyScan query 10:40:34 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0009 0008 10:40:34 Msec=3000 True Az=130.995 Ze=-141.525 Az status=0009 Ze status=0008 10:40:34 Check angles 10:40:34 SkyScan query 10:40:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.51<-21434 Statuses=0008 0008 10:40:35 Msec=3750 True Az=130.995 Ze=-141.51 Az status=0008 Ze status=0008 10:40:35 Message to Master queued w/err=0: serial=8116 error=0 10:40:40 Received message from Master: op=Filter serial=8117 10:40:40 Color wheel filter change from 0 to 0 10:40:40 FLIGetFilterPos err=0 currentPosition=0 10:40:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:40:40 Filter is already there-color wheel unchanged 10:40:40 Received message from Master: op=Shutter serial=8118 10:40:40 Shutter LASER close 10:40:40 Received message from Camera: op=State serial=8120 10:40:40 GetSingleValue result=40 Value=cccccccc 10:40:40 SkyScan query 10:40:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:40:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:41 Parameters OK 10:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:41 Set A/D data flow result=40 10:40:41 Set A/D channel type result=40 10:40:41 Set A/D encoding result=40 10:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:41 Set channel filter=0.000000e+000 result=40 10:40:41 Config A/D Result=40 10:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:41 Get A/D filter: -9.255963e+061 result=40 10:40:41 Get A/D value=-858993460 result=40 10:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:40:41 Parameters OK 10:40:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:40:41 Set A/D data flow result=40 10:40:41 Set A/D channel type result=40 10:40:41 Set A/D encoding result=40 10:40:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:40:41 Set channel filter=0.000000e+000 result=40 10:40:41 Config A/D Result=40 10:40:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:40:41 Get A/D filter: -9.255963e+061 result=40 10:40:41 Get A/D value=-858993460 result=40 10:40:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:40:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:40:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:40:41 Aux= 10:40:41 Message to Camera, serial 8120 queued 10:41:11 Received message from Master: op=PointingHead serial=8127 10:41:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:41:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:41:12 Point started: ret=0 10:41:12 point_skyscan result=0 10:41:13 Check angles 10:41:13 SkyScan query 10:41:13 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.315<-23421 Statuses=0009 0009 10:41:13 Msec=0 True Az=113.025 Ze=-171.315 Az status=0009 Ze status=0009 10:41:13 Check angles 10:41:13 SkyScan query 10:41:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:41:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:41:14 Message to Master queued w/err=0: serial=8127 error=0 10:41:19 Received message from Master: op=Filter serial=8128 10:41:19 Color wheel filter change from 0 to 0 10:41:19 FLIGetFilterPos err=0 currentPosition=0 10:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:19 Filter is already there-color wheel unchanged 10:41:19 Received message from Master: op=Shutter serial=8129 10:41:19 Shutter LASER open 10:41:19 Received message from Camera: op=State serial=8131 10:41:19 GetSingleValue result=40 Value=cccccccc 10:41:19 SkyScan query 10:41:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:41:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:20 Parameters OK 10:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:20 Set A/D data flow result=40 10:41:20 Set A/D channel type result=40 10:41:20 Set A/D encoding result=40 10:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:20 Set channel filter=0.000000e+000 result=40 10:41:20 Config A/D Result=40 10:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:20 Get A/D filter: -9.255963e+061 result=40 10:41:20 Get A/D value=-858993460 result=40 10:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:20 Parameters OK 10:41:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:20 Set A/D data flow result=40 10:41:20 Set A/D channel type result=40 10:41:20 Set A/D encoding result=40 10:41:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:20 Set channel filter=0.000000e+000 result=40 10:41:20 Config A/D Result=40 10:41:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:20 Get A/D filter: -9.255963e+061 result=40 10:41:20 Get A/D value=-858993460 result=40 10:41:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:20 Aux= 10:41:20 Message to Camera, serial 8131 queued 10:41:22 Received message from Master: op=Shutter serial=8135 10:41:22 Shutter LASER close 10:41:23 Received message from Master: op=PointingHead serial=8139 10:41:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:41:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:41:23 Point started: ret=0 10:41:23 point_skyscan result=0 10:41:24 Check angles 10:41:24 SkyScan query 10:41:25 SkyScan query done: ret=0 az=136.17<-9078 ze=-142.92<-21528 Statuses=0009 0009 10:41:25 Msec=0 True Az=136.17 Ze=-142.92 Az status=0009 Ze status=0009 10:41:25 Check angles 10:41:25 SkyScan query 10:41:25 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.965<-20131 Statuses=0009 0009 10:41:25 Msec=750 True Az=153.705 Ze=-121.965 Az status=0009 Ze status=0009 10:41:25 Check angles 10:41:25 SkyScan query 10:41:26 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.04<-18736 Statuses=0009 0009 10:41:26 Msec=1500 True Az=171.18 Ze=-101.04 Az status=0009 Ze status=0009 10:41:26 Check angles 10:41:26 SkyScan query 10:41:27 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 10:41:27 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 10:41:27 Check angles 10:41:27 SkyScan query 10:41:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.65<-15910 Statuses=0008 0009 10:41:28 Msec=3000 True Az=175.995 Ze=-58.65 Az status=0008 Ze status=0009 10:41:28 Check angles 10:41:28 SkyScan query 10:41:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:41:28 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:41:28 Message to Master queued w/err=0: serial=8139 error=0 10:41:33 Received message from Master: op=Filter serial=8140 10:41:33 Color wheel filter change from 0 to 0 10:41:33 FLIGetFilterPos err=0 currentPosition=0 10:41:33 FLIGetStepsRemaining err=0 RemainingSteps=0 10:41:33 Filter is already there-color wheel unchanged 10:41:33 Received message from Master: op=Shutter serial=8141 10:41:33 Shutter LASER close 10:41:34 Received message from Camera: op=State serial=8143 10:41:34 GetSingleValue result=40 Value=cccccccc 10:41:34 SkyScan query 10:41:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:41:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:34 Parameters OK 10:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:34 Set A/D data flow result=40 10:41:34 Set A/D channel type result=40 10:41:34 Set A/D encoding result=40 10:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:34 Set channel filter=0.000000e+000 result=40 10:41:34 Config A/D Result=40 10:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:34 Get A/D filter: -9.255963e+061 result=40 10:41:34 Get A/D value=-858993460 result=40 10:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:41:34 Parameters OK 10:41:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:41:34 Set A/D data flow result=40 10:41:34 Set A/D channel type result=40 10:41:34 Set A/D encoding result=40 10:41:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:41:34 Set channel filter=0.000000e+000 result=40 10:41:34 Config A/D Result=40 10:41:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:41:34 Get A/D filter: -9.255963e+061 result=40 10:41:34 Get A/D value=-858993460 result=40 10:41:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:41:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:41:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:41:34 Aux= 10:41:34 Message to Camera, serial 8143 queued 10:42:05 Received message from Master: op=PointingHead serial=8150 10:42:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:42:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:42:05 Point started: ret=0 10:42:05 point_skyscan result=0 10:42:06 Check angles 10:42:06 SkyScan query 10:42:07 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.495<-13433 Statuses=0009 0009 10:42:07 Msec=0 True Az=152.79 Ze=-21.495 Az status=0009 Ze status=0009 10:42:07 Check angles 10:42:07 SkyScan query 10:42:07 SkyScan query done: ret=0 az=135<-9000 ze=-0.09<-12006 Statuses=0009 0009 10:42:07 Msec=750 True Az=135 Ze=-0.09 Az status=0009 Ze status=0009 10:42:08 Check angles 10:42:08 SkyScan query 10:42:08 SkyScan query done: ret=0 az=117.405<-7827 ze=20.865<-10609 Statuses=0009 0009 10:42:08 Msec=1500 True Az=117.405 Ze=20.865 Az status=0009 Ze status=0009 10:42:08 Check angles 10:42:08 SkyScan query 10:42:09 SkyScan query done: ret=0 az=100.02<-6668 ze=41.805<-9213 Statuses=0009 0009 10:42:09 Msec=2250 True Az=100.02 Ze=41.805 Az status=0009 Ze status=0009 10:42:09 Check angles 10:42:09 SkyScan query 10:42:10 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 10:42:10 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 10:42:10 Check angles 10:42:10 SkyScan query 10:42:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:42:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:42:11 Message to Master queued w/err=0: serial=8150 error=0 10:42:16 Received message from Master: op=Filter serial=8151 10:42:16 Color wheel filter change from 0 to 0 10:42:16 FLIGetFilterPos err=0 currentPosition=0 10:42:16 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:16 Filter is already there-color wheel unchanged 10:42:16 Received message from Master: op=Shutter serial=8152 10:42:16 Shutter LASER close 10:42:16 Received message from Camera: op=State serial=8154 10:42:16 GetSingleValue result=40 Value=cccccccc 10:42:16 SkyScan query 10:42:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:42:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:16 Parameters OK 10:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:16 Set A/D data flow result=40 10:42:16 Set A/D channel type result=40 10:42:16 Set A/D encoding result=40 10:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:16 Set channel filter=0.000000e+000 result=40 10:42:16 Config A/D Result=40 10:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:16 Get A/D filter: -9.255963e+061 result=40 10:42:16 Get A/D value=-858993460 result=40 10:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:16 Parameters OK 10:42:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:16 Set A/D data flow result=40 10:42:16 Set A/D channel type result=40 10:42:16 Set A/D encoding result=40 10:42:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:16 Set channel filter=0.000000e+000 result=40 10:42:16 Config A/D Result=40 10:42:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:16 Get A/D filter: -9.255963e+061 result=40 10:42:16 Get A/D value=-858993460 result=40 10:42:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:16 Aux= 10:42:16 Message to Camera, serial 8154 queued 10:42:47 Received message from Master: op=PointingHead serial=8161 10:42:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:42:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:42:48 Point started: ret=0 10:42:48 point_skyscan result=0 10:42:48 Check angles 10:42:48 SkyScan query 10:42:49 SkyScan query done: ret=0 az=109.425<-7295 ze=38.49<-9434 Statuses=0009 0008 10:42:49 Msec=0 True Az=109.425 Ze=38.49 Az status=0009 Ze status=0008 10:42:49 Check angles 10:42:49 SkyScan query 10:42:50 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 10:42:50 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 10:42:50 Check angles 10:42:50 SkyScan query 10:42:50 SkyScan query done: ret=0 az=144.66<-9644 ze=38.505<-9433 Statuses=0009 0008 10:42:50 Msec=1500 True Az=144.66 Ze=38.505 Az status=0009 Ze status=0008 10:42:51 Check angles 10:42:51 SkyScan query 10:42:51 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 10:42:51 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 10:42:51 Check angles 10:42:51 SkyScan query 10:42:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:42:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:42:52 Check angles 10:42:52 SkyScan query 10:42:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:42:53 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 10:42:53 Message to Master queued w/err=0: serial=8161 error=0 10:42:58 Received message from Master: op=Filter serial=8162 10:42:58 Color wheel filter change from 0 to 0 10:42:58 FLIGetFilterPos err=0 currentPosition=0 10:42:58 FLIGetStepsRemaining err=0 RemainingSteps=0 10:42:58 Filter is already there-color wheel unchanged 10:42:58 Received message from Master: op=Shutter serial=8163 10:42:58 Shutter LASER close 10:42:58 Received message from Camera: op=State serial=8165 10:42:58 GetSingleValue result=40 Value=cccccccc 10:42:58 SkyScan query 10:42:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:42:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:58 Parameters OK 10:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:58 Set A/D data flow result=40 10:42:58 Set A/D channel type result=40 10:42:58 Set A/D encoding result=40 10:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:58 Set channel filter=0.000000e+000 result=40 10:42:58 Config A/D Result=40 10:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:58 Get A/D filter: -9.255963e+061 result=40 10:42:58 Get A/D value=-858993460 result=40 10:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:42:58 Parameters OK 10:42:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:42:58 Set A/D data flow result=40 10:42:58 Set A/D channel type result=40 10:42:58 Set A/D encoding result=40 10:42:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:42:58 Set channel filter=0.000000e+000 result=40 10:42:58 Config A/D Result=40 10:42:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:42:58 Get A/D filter: -9.255963e+061 result=40 10:42:58 Get A/D value=-858993460 result=40 10:42:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:42:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:42:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:42:58 Aux= 10:42:58 Message to Camera, serial 8165 queued 10:43:29 Received message from Master: op=PointingHead serial=8172 10:43:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:43:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:43:30 Point started: ret=0 10:43:30 point_skyscan result=0 10:43:30 Check angles 10:43:30 SkyScan query 10:43:31 SkyScan query done: ret=0 az=153.195<-10213 ze=8.91<-11406 Statuses=0009 0009 10:43:31 Msec=0 True Az=153.195 Ze=8.91 Az status=0009 Ze status=0009 10:43:31 Check angles 10:43:31 SkyScan query 10:43:32 SkyScan query done: ret=0 az=135.765<-9051 ze=-12.03<-12802 Statuses=0009 0009 10:43:32 Msec=750 True Az=135.765 Ze=-12.03 Az status=0009 Ze status=0009 10:43:32 Check angles 10:43:32 SkyScan query 10:43:32 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.42<-14228 Statuses=0009 0009 10:43:32 Msec=1500 True Az=117.87 Ze=-33.42 Az status=0009 Ze status=0009 10:43:33 Check angles 10:43:33 SkyScan query 10:43:33 SkyScan query done: ret=0 az=100.455<-6697 ze=-51.54<-15436 Statuses=0009 0009 10:43:33 Msec=2250 True Az=100.455 Ze=-51.54 Az status=0009 Ze status=0009 10:43:33 Check angles 10:43:33 SkyScan query 10:43:34 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:43:34 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:43:34 Check angles 10:43:34 SkyScan query 10:43:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:43:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:43:35 Message to Master queued w/err=0: serial=8172 error=0 10:43:40 Received message from Master: op=Filter serial=8173 10:43:40 Color wheel filter change from 0 to 0 10:43:40 FLIGetFilterPos err=0 currentPosition=0 10:43:40 FLIGetStepsRemaining err=0 RemainingSteps=0 10:43:40 Filter is already there-color wheel unchanged 10:43:40 Received message from Master: op=Shutter serial=8174 10:43:40 Shutter LASER close 10:43:40 Received message from Camera: op=State serial=8176 10:43:40 GetSingleValue result=40 Value=cccccccc 10:43:40 SkyScan query 10:43:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:43:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:41 Parameters OK 10:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:41 Set A/D data flow result=40 10:43:41 Set A/D channel type result=40 10:43:41 Set A/D encoding result=40 10:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:41 Set channel filter=0.000000e+000 result=40 10:43:41 Config A/D Result=40 10:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:41 Get A/D filter: -9.255963e+061 result=40 10:43:41 Get A/D value=-858993460 result=40 10:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:43:41 Parameters OK 10:43:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:43:41 Set A/D data flow result=40 10:43:41 Set A/D channel type result=40 10:43:41 Set A/D encoding result=40 10:43:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:43:41 Set channel filter=0.000000e+000 result=40 10:43:41 Config A/D Result=40 10:43:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:43:41 Get A/D filter: -9.255963e+061 result=40 10:43:41 Get A/D value=-858993460 result=40 10:43:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:43:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:43:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:43:41 Aux= 10:43:41 Message to Camera, serial 8176 queued 10:44:11 Received message from Master: op=PointingHead serial=8183 10:44:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:44:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:44:12 Point started: ret=0 10:44:12 point_skyscan result=0 10:44:12 Check angles 10:44:12 SkyScan query 10:44:13 SkyScan query done: ret=0 az=108.78<-7252 ze=-81.075<-17405 Statuses=0009 0009 10:44:13 Msec=0 True Az=108.78 Ze=-81.075 Az status=0009 Ze status=0009 10:44:13 Check angles 10:44:13 SkyScan query 10:44:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 10:44:14 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 10:44:14 Check angles 10:44:14 SkyScan query 10:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.97<-20198 Statuses=0008 0009 10:44:15 Msec=1500 True Az=112.995 Ze=-122.97 Az status=0008 Ze status=0009 10:44:15 Check angles 10:44:15 SkyScan query 10:44:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.925<-21595 Statuses=0008 0009 10:44:15 Msec=2250 True Az=112.995 Ze=-143.925 Az status=0008 Ze status=0009 10:44:15 Check angles 10:44:15 SkyScan query 10:44:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.88<-22992 Statuses=0008 0009 10:44:16 Msec=3000 True Az=112.995 Ze=-164.88 Az status=0008 Ze status=0009 10:44:16 Check angles 10:44:16 SkyScan query 10:44:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:44:17 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:44:17 Message to Master queued w/err=0: serial=8183 error=0 10:44:22 Received message from Master: op=Filter serial=8184 10:44:22 Color wheel filter change from 0 to 0 10:44:22 FLIGetFilterPos err=0 currentPosition=0 10:44:22 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:22 Filter is already there-color wheel unchanged 10:44:22 Received message from Master: op=Shutter serial=8185 10:44:22 Shutter LASER open 10:44:22 Received message from Camera: op=State serial=8187 10:44:22 GetSingleValue result=40 Value=cccccccc 10:44:22 SkyScan query 10:44:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:44:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:23 Parameters OK 10:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:23 Set A/D data flow result=40 10:44:23 Set A/D channel type result=40 10:44:23 Set A/D encoding result=40 10:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:23 Set channel filter=0.000000e+000 result=40 10:44:23 Config A/D Result=40 10:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:23 Get A/D filter: -9.255963e+061 result=40 10:44:23 Get A/D value=-858993460 result=40 10:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:23 Parameters OK 10:44:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:23 Set A/D data flow result=40 10:44:23 Set A/D channel type result=40 10:44:23 Set A/D encoding result=40 10:44:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:23 Set channel filter=0.000000e+000 result=40 10:44:23 Config A/D Result=40 10:44:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:23 Get A/D filter: -9.255963e+061 result=40 10:44:23 Get A/D value=-858993460 result=40 10:44:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:23 Aux= 10:44:23 Message to Camera, serial 8187 queued 10:44:25 Received message from Master: op=Shutter serial=8191 10:44:25 Shutter LASER close 10:44:26 Received message from Master: op=PointingHead serial=8195 10:44:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:44:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:44:26 Point started: ret=0 10:44:26 point_skyscan result=0 10:44:27 Check angles 10:44:27 SkyScan query 10:44:27 SkyScan query done: ret=0 az=89.94<-5996 ze=157.26<-1516 Statuses=0009 0009 10:44:27 Msec=0 True Az=89.94 Ze=157.26 Az status=0009 Ze status=0009 10:44:27 Check angles 10:44:27 SkyScan query 10:44:28 SkyScan query done: ret=0 az=72.12<-4808 ze=135.825<-2945 Statuses=0009 0009 10:44:28 Msec=750 True Az=72.12 Ze=135.825 Az status=0009 Ze status=0009 10:44:28 Check angles 10:44:28 SkyScan query 10:44:29 SkyScan query done: ret=0 az=54.765<-3651 ze=114.915<-4339 Statuses=0009 0009 10:44:29 Msec=1500 True Az=54.765 Ze=114.915 Az status=0009 Ze status=0009 10:44:29 Check angles 10:44:29 SkyScan query 10:44:30 SkyScan query done: ret=0 az=40.86<-2724 ze=93.945<-5737 Statuses=0009 0009 10:44:30 Msec=2250 True Az=40.86 Ze=93.945 Az status=0009 Ze status=0009 10:44:30 Check angles 10:44:30 SkyScan query 10:44:30 SkyScan query done: ret=0 az=41.01<-2734 ze=72.975<-7135 Statuses=0008 0009 10:44:30 Msec=3000 True Az=41.01 Ze=72.975 Az status=0008 Ze status=0009 10:44:30 Check angles 10:44:30 SkyScan query 10:44:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 10:44:31 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 10:44:31 Check angles 10:44:31 SkyScan query 10:44:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:44:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:44:32 Message to Master queued w/err=0: serial=8195 error=0 10:44:37 Received message from Master: op=Filter serial=8196 10:44:37 Color wheel filter change from 0 to 0 10:44:37 FLIGetFilterPos err=0 currentPosition=0 10:44:37 FLIGetStepsRemaining err=0 RemainingSteps=0 10:44:37 Filter is already there-color wheel unchanged 10:44:37 Received message from Master: op=Shutter serial=8197 10:44:37 Shutter LASER close 10:44:37 Received message from Camera: op=State serial=8199 10:44:37 GetSingleValue result=40 Value=cccccccc 10:44:37 SkyScan query 10:44:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:44:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:38 Parameters OK 10:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:38 Set A/D data flow result=40 10:44:38 Set A/D channel type result=40 10:44:38 Set A/D encoding result=40 10:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:38 Set channel filter=0.000000e+000 result=40 10:44:38 Config A/D Result=40 10:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:38 Get A/D filter: -9.255963e+061 result=40 10:44:38 Get A/D value=-858993460 result=40 10:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:44:38 Parameters OK 10:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:44:38 Set A/D data flow result=40 10:44:38 Set A/D channel type result=40 10:44:38 Set A/D encoding result=40 10:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:44:38 Set channel filter=0.000000e+000 result=40 10:44:38 Config A/D Result=40 10:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:44:38 Get A/D filter: -9.255963e+061 result=40 10:44:38 Get A/D value=-858993460 result=40 10:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:44:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:44:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:44:38 Aux= 10:44:38 Message to Camera, serial 8199 queued 10:45:09 Received message from Master: op=PointingHead serial=8206 10:45:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:45:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:45:09 Point started: ret=0 10:45:09 point_skyscan result=0 10:45:10 Check angles 10:45:10 SkyScan query 10:45:10 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 10:45:10 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 10:45:10 Check angles 10:45:10 SkyScan query 10:45:11 SkyScan query done: ret=0 az=82.38<-5492 ze=66.495<-7567 Statuses=0009 0008 10:45:11 Msec=750 True Az=82.38 Ze=66.495 Az status=0009 Ze status=0008 10:45:11 Check angles 10:45:11 SkyScan query 10:45:12 SkyScan query done: ret=0 az=99.96<-6664 ze=66.495<-7567 Statuses=0009 0008 10:45:12 Msec=1500 True Az=99.96 Ze=66.495 Az status=0009 Ze status=0008 10:45:12 Check angles 10:45:12 SkyScan query 10:45:13 SkyScan query done: ret=0 az=117.375<-7825 ze=66.495<-7567 Statuses=0009 0008 10:45:13 Msec=2250 True Az=117.375 Ze=66.495 Az status=0009 Ze status=0008 10:45:13 Check angles 10:45:13 SkyScan query 10:45:13 SkyScan query done: ret=0 az=135.345<-9023 ze=66.495<-7567 Statuses=0009 0008 10:45:13 Msec=3000 True Az=135.345 Ze=66.495 Az status=0009 Ze status=0008 10:45:13 Check angles 10:45:13 SkyScan query 10:45:14 SkyScan query done: ret=0 az=153.03<-10202 ze=66.495<-7567 Statuses=0009 0008 10:45:14 Msec=3750 True Az=153.03 Ze=66.495 Az status=0009 Ze status=0008 10:45:14 Check angles 10:45:14 SkyScan query 10:45:15 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:45:15 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:45:15 Message to Master queued w/err=0: serial=8206 error=0 10:45:20 Received message from Master: op=Filter serial=8207 10:45:20 Color wheel filter change from 0 to 0 10:45:20 FLIGetFilterPos err=0 currentPosition=0 10:45:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:45:20 Filter is already there-color wheel unchanged 10:45:20 Received message from Master: op=Shutter serial=8208 10:45:20 Shutter LASER close 10:45:20 Received message from Camera: op=State serial=8210 10:45:20 GetSingleValue result=40 Value=cccccccc 10:45:20 SkyScan query 10:45:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:45:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:21 Parameters OK 10:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:21 Set A/D data flow result=40 10:45:21 Set A/D channel type result=40 10:45:21 Set A/D encoding result=40 10:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:21 Set channel filter=0.000000e+000 result=40 10:45:21 Config A/D Result=40 10:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:21 Get A/D filter: -9.255963e+061 result=40 10:45:21 Get A/D value=-858993460 result=40 10:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:45:21 Parameters OK 10:45:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:45:21 Set A/D data flow result=40 10:45:21 Set A/D channel type result=40 10:45:21 Set A/D encoding result=40 10:45:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:45:21 Set channel filter=0.000000e+000 result=40 10:45:21 Config A/D Result=40 10:45:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:45:21 Get A/D filter: -9.255963e+061 result=40 10:45:21 Get A/D value=-858993460 result=40 10:45:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:45:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:45:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:45:21 Aux= 10:45:21 Message to Camera, serial 8210 queued 10:45:52 Received message from Master: op=PointingHead serial=8217 10:45:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:45:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:45:52 Point started: ret=0 10:45:52 point_skyscan result=0 10:45:53 Check angles 10:45:53 SkyScan query 10:45:53 SkyScan query done: ret=0 az=135.27<-9018 ze=36.96<-9536 Statuses=0009 0009 10:45:53 Msec=0 True Az=135.27 Ze=36.96 Az status=0009 Ze status=0009 10:45:53 Check angles 10:45:53 SkyScan query 10:45:54 SkyScan query done: ret=0 az=117.705<-7847 ze=16.005<-10933 Statuses=0009 0009 10:45:54 Msec=750 True Az=117.705 Ze=16.005 Az status=0009 Ze status=0009 10:45:54 Check angles 10:45:54 SkyScan query 10:45:55 SkyScan query done: ret=0 az=100.395<-6693 ze=-4.965<-12331 Statuses=0009 0009 10:45:55 Msec=1500 True Az=100.395 Ze=-4.965 Az status=0009 Ze status=0009 10:45:55 Check angles 10:45:55 SkyScan query 10:45:55 SkyScan query done: ret=0 az=82.875<-5525 ze=-25.935<-13729 Statuses=0009 0009 10:45:55 Msec=2250 True Az=82.875 Ze=-25.935 Az status=0009 Ze status=0009 10:45:56 Check angles 10:45:56 SkyScan query 10:45:56 SkyScan query done: ret=0 az=65.49<-4366 ze=-38.565<-14571 Statuses=0009 0008 10:45:56 Msec=3000 True Az=65.49 Ze=-38.565 Az status=0009 Ze status=0008 10:45:56 Check angles 10:45:56 SkyScan query 10:45:57 SkyScan query done: ret=0 az=47.85<-3190 ze=-38.535<-14569 Statuses=0009 0008 10:45:57 Msec=3750 True Az=47.85 Ze=-38.535 Az status=0009 Ze status=0008 10:45:57 Check angles 10:45:57 SkyScan query 10:45:58 SkyScan query done: ret=0 az=41.01<-2734 ze=-38.505<-14567 Statuses=0008 0008 10:45:58 Msec=4500 True Az=41.01 Ze=-38.505 Az status=0008 Ze status=0008 10:45:58 Message to Master queued w/err=0: serial=8217 error=0 10:46:03 Received message from Master: op=Filter serial=8218 10:46:03 Color wheel filter change from 0 to 0 10:46:03 FLIGetFilterPos err=0 currentPosition=0 10:46:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:03 Filter is already there-color wheel unchanged 10:46:03 Received message from Master: op=Shutter serial=8219 10:46:03 Shutter LASER close 10:46:03 Received message from Camera: op=State serial=8221 10:46:03 GetSingleValue result=40 Value=cccccccc 10:46:03 SkyScan query 10:46:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:46:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:03 Parameters OK 10:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:03 Set A/D data flow result=40 10:46:03 Set A/D channel type result=40 10:46:03 Set A/D encoding result=40 10:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:03 Set channel filter=0.000000e+000 result=40 10:46:03 Config A/D Result=40 10:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:03 Get A/D filter: -9.255963e+061 result=40 10:46:03 Get A/D value=-858993460 result=40 10:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:03 Parameters OK 10:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:03 Set A/D data flow result=40 10:46:03 Set A/D channel type result=40 10:46:03 Set A/D encoding result=40 10:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:03 Set channel filter=0.000000e+000 result=40 10:46:03 Config A/D Result=40 10:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:03 Get A/D filter: -9.255963e+061 result=40 10:46:03 Get A/D value=-858993460 result=40 10:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:03 Aux= 10:46:03 Message to Camera, serial 8221 queued 10:46:34 Received message from Master: op=PointingHead serial=8228 10:46:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:46:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:46:35 Point started: ret=0 10:46:35 point_skyscan result=0 10:46:35 Check angles 10:46:35 SkyScan query 10:46:36 SkyScan query done: ret=0 az=63.735<-4249 ze=-68.055<-16537 Statuses=0009 0009 10:46:36 Msec=0 True Az=63.735 Ze=-68.055 Az status=0009 Ze status=0009 10:46:36 Check angles 10:46:36 SkyScan query 10:46:37 SkyScan query done: ret=0 az=81.24<-5416 ze=-89.025<-17935 Statuses=0009 0009 10:46:37 Msec=750 True Az=81.24 Ze=-89.025 Az status=0009 Ze status=0009 10:46:37 Check angles 10:46:37 SkyScan query 10:46:37 SkyScan query done: ret=0 az=98.7<-6580 ze=-109.965<-19331 Statuses=0009 0009 10:46:37 Msec=1500 True Az=98.7 Ze=-109.965 Az status=0009 Ze status=0009 10:46:38 Check angles 10:46:38 SkyScan query 10:46:38 SkyScan query done: ret=0 az=116.145<-7743 ze=-130.92<-20728 Statuses=0009 0009 10:46:38 Msec=2250 True Az=116.145 Ze=-130.92 Az status=0009 Ze status=0009 10:46:38 Check angles 10:46:38 SkyScan query 10:46:39 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.525<-21435 Statuses=0009 0008 10:46:39 Msec=3000 True Az=130.98 Ze=-141.525 Az status=0009 Ze status=0008 10:46:39 Check angles 10:46:39 SkyScan query 10:46:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:46:40 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:46:40 Message to Master queued w/err=0: serial=8228 error=0 10:46:45 Received message from Master: op=Filter serial=8229 10:46:45 Color wheel filter change from 0 to 0 10:46:45 FLIGetFilterPos err=0 currentPosition=0 10:46:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:46:45 Filter is already there-color wheel unchanged 10:46:45 Received message from Master: op=Shutter serial=8230 10:46:45 Shutter LASER close 10:46:45 Received message from Camera: op=State serial=8232 10:46:45 GetSingleValue result=40 Value=cccccccc 10:46:45 SkyScan query 10:46:46 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:46:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:46 Parameters OK 10:46:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:46 Set A/D data flow result=40 10:46:46 Set A/D channel type result=40 10:46:46 Set A/D encoding result=40 10:46:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:46 Set channel filter=0.000000e+000 result=40 10:46:46 Config A/D Result=40 10:46:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:46 Get A/D filter: -9.255963e+061 result=40 10:46:46 Get A/D value=-858993460 result=40 10:46:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:46:46 Parameters OK 10:46:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:46:46 Set A/D data flow result=40 10:46:46 Set A/D channel type result=40 10:46:46 Set A/D encoding result=40 10:46:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:46:46 Set channel filter=0.000000e+000 result=40 10:46:46 Config A/D Result=40 10:46:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:46:46 Get A/D filter: -9.255963e+061 result=40 10:46:46 Get A/D value=-858993460 result=40 10:46:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:46:46 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:46:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:46:46 Aux= 10:46:46 Message to Camera, serial 8232 queued 10:47:16 Received message from Master: op=PointingHead serial=8239 10:47:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:47:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:47:17 Point started: ret=0 10:47:17 point_skyscan result=0 10:47:18 Check angles 10:47:18 SkyScan query 10:47:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0009 0009 10:47:18 Msec=0 True Az=113.01 Ze=-171.495 Az status=0009 Ze status=0009 10:47:18 Check angles 10:47:18 SkyScan query 10:47:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:47:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:47:19 Message to Master queued w/err=0: serial=8239 error=0 10:47:24 Received message from Master: op=Filter serial=8240 10:47:24 Color wheel filter change from 0 to 0 10:47:24 FLIGetFilterPos err=0 currentPosition=0 10:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:24 Filter is already there-color wheel unchanged 10:47:24 Received message from Master: op=Shutter serial=8241 10:47:24 Shutter LASER open 10:47:24 Received message from Camera: op=State serial=8243 10:47:24 GetSingleValue result=40 Value=cccccccc 10:47:24 SkyScan query 10:47:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:47:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:25 Parameters OK 10:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:25 Set A/D data flow result=40 10:47:25 Set A/D channel type result=40 10:47:25 Set A/D encoding result=40 10:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:25 Set channel filter=0.000000e+000 result=40 10:47:25 Config A/D Result=40 10:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:25 Get A/D filter: -9.255963e+061 result=40 10:47:25 Get A/D value=-858993460 result=40 10:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:25 Parameters OK 10:47:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:25 Set A/D data flow result=40 10:47:25 Set A/D channel type result=40 10:47:25 Set A/D encoding result=40 10:47:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:25 Set channel filter=0.000000e+000 result=40 10:47:25 Config A/D Result=40 10:47:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:25 Get A/D filter: -9.255963e+061 result=40 10:47:25 Get A/D value=-858993460 result=40 10:47:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:25 Aux= 10:47:25 Message to Camera, serial 8243 queued 10:47:27 Received message from Master: op=Shutter serial=8247 10:47:27 Shutter LASER close 10:47:28 Received message from Master: op=PointingHead serial=8251 10:47:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:47:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:47:28 Point started: ret=0 10:47:28 point_skyscan result=0 10:47:29 Check angles 10:47:29 SkyScan query 10:47:29 SkyScan query done: ret=0 az=135.825<-9055 ze=-143.34<-21556 Statuses=0009 0009 10:47:29 Msec=0 True Az=135.825 Ze=-143.34 Az status=0009 Ze status=0009 10:47:30 Check angles 10:47:30 SkyScan query 10:47:30 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.935<-20129 Statuses=0009 0009 10:47:30 Msec=750 True Az=153.765 Ze=-121.935 Az status=0009 Ze status=0009 10:47:30 Check angles 10:47:30 SkyScan query 10:47:31 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.01<-18734 Statuses=0009 0009 10:47:31 Msec=1500 True Az=171.165 Ze=-101.01 Az status=0009 Ze status=0009 10:47:31 Check angles 10:47:31 SkyScan query 10:47:32 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.055<-17337 Statuses=0008 0009 10:47:32 Msec=2250 True Az=176.01 Ze=-80.055 Az status=0008 Ze status=0009 10:47:32 Check angles 10:47:32 SkyScan query 10:47:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 10:47:32 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 10:47:33 Check angles 10:47:33 SkyScan query 10:47:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:47:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:47:33 Message to Master queued w/err=0: serial=8251 error=0 10:47:38 Received message from Master: op=Filter serial=8252 10:47:38 Color wheel filter change from 0 to 0 10:47:38 FLIGetFilterPos err=0 currentPosition=0 10:47:38 FLIGetStepsRemaining err=0 RemainingSteps=0 10:47:38 Filter is already there-color wheel unchanged 10:47:38 Received message from Master: op=Shutter serial=8253 10:47:38 Shutter LASER close 10:47:39 Received message from Camera: op=State serial=8255 10:47:39 GetSingleValue result=40 Value=cccccccc 10:47:39 SkyScan query 10:47:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:47:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:39 Parameters OK 10:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:39 Set A/D data flow result=40 10:47:39 Set A/D channel type result=40 10:47:39 Set A/D encoding result=40 10:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:39 Set channel filter=0.000000e+000 result=40 10:47:39 Config A/D Result=40 10:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:39 Get A/D filter: -9.255963e+061 result=40 10:47:39 Get A/D value=-858993460 result=40 10:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:47:39 Parameters OK 10:47:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:47:39 Set A/D data flow result=40 10:47:39 Set A/D channel type result=40 10:47:39 Set A/D encoding result=40 10:47:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:47:39 Set channel filter=0.000000e+000 result=40 10:47:39 Config A/D Result=40 10:47:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:47:39 Get A/D filter: -9.255963e+061 result=40 10:47:39 Get A/D value=-858993460 result=40 10:47:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:47:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:47:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:47:39 Aux= 10:47:39 Message to Camera, serial 8255 queued 10:48:10 Received message from Master: op=PointingHead serial=8262 10:48:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:48:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:48:10 Point started: ret=0 10:48:10 point_skyscan result=0 10:48:11 Check angles 10:48:11 SkyScan query 10:48:12 SkyScan query done: ret=0 az=153.165<-10211 ze=-21.945<-13463 Statuses=0009 0009 10:48:12 Msec=0 True Az=153.165 Ze=-21.945 Az status=0009 Ze status=0009 10:48:12 Check angles 10:48:12 SkyScan query 10:48:12 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.99<-12066 Statuses=0009 0009 10:48:12 Msec=750 True Az=135.735 Ze=-0.99 Az status=0009 Ze status=0009 10:48:13 Check angles 10:48:13 SkyScan query 10:48:13 SkyScan query done: ret=0 az=118.245<-7883 ze=19.965<-10669 Statuses=0009 0009 10:48:13 Msec=1500 True Az=118.245 Ze=19.965 Az status=0009 Ze status=0009 10:48:13 Check angles 10:48:13 SkyScan query 10:48:14 SkyScan query done: ret=0 az=100.8<-6720 ze=40.935<-9271 Statuses=0009 0009 10:48:14 Msec=2250 True Az=100.8 Ze=40.935 Az status=0009 Ze status=0009 10:48:14 Check angles 10:48:14 SkyScan query 10:48:15 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 10:48:15 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 10:48:15 Check angles 10:48:15 SkyScan query 10:48:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:48:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:48:15 Message to Master queued w/err=0: serial=8262 error=0 10:48:20 Received message from Master: op=Filter serial=8263 10:48:20 Color wheel filter change from 0 to 0 10:48:20 FLIGetFilterPos err=0 currentPosition=0 10:48:20 FLIGetStepsRemaining err=0 RemainingSteps=0 10:48:20 Filter is already there-color wheel unchanged 10:48:21 Received message from Master: op=Shutter serial=8264 10:48:21 Shutter LASER close 10:48:21 Received message from Camera: op=State serial=8266 10:48:21 GetSingleValue result=40 Value=cccccccc 10:48:21 SkyScan query 10:48:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:48:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:21 Parameters OK 10:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:21 Set A/D data flow result=40 10:48:21 Set A/D channel type result=40 10:48:21 Set A/D encoding result=40 10:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:21 Set channel filter=0.000000e+000 result=40 10:48:21 Config A/D Result=40 10:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:21 Get A/D filter: -9.255963e+061 result=40 10:48:21 Get A/D value=-858993460 result=40 10:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:48:21 Parameters OK 10:48:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:48:21 Set A/D data flow result=40 10:48:21 Set A/D channel type result=40 10:48:21 Set A/D encoding result=40 10:48:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:48:21 Set channel filter=0.000000e+000 result=40 10:48:21 Config A/D Result=40 10:48:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:48:21 Get A/D filter: -9.255963e+061 result=40 10:48:21 Get A/D value=-858993460 result=40 10:48:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:48:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:48:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:48:21 Aux= 10:48:21 Message to Camera, serial 8266 queued 10:48:52 Received message from Master: op=PointingHead serial=8273 10:48:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:48:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:48:52 Point started: ret=0 10:48:52 point_skyscan result=0 10:48:53 Check angles 10:48:53 SkyScan query 10:48:54 SkyScan query done: ret=0 az=109.185<-7279 ze=38.49<-9434 Statuses=0009 0008 10:48:54 Msec=0 True Az=109.185 Ze=38.49 Az status=0009 Ze status=0008 10:48:54 Check angles 10:48:54 SkyScan query 10:48:54 SkyScan query done: ret=0 az=126.705<-8447 ze=38.49<-9434 Statuses=0009 0008 10:48:54 Msec=750 True Az=126.705 Ze=38.49 Az status=0009 Ze status=0008 10:48:55 Check angles 10:48:55 SkyScan query 10:48:55 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 10:48:55 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 10:48:55 Check angles 10:48:55 SkyScan query 10:48:56 SkyScan query done: ret=0 az=162.39<-10826 ze=38.505<-9433 Statuses=0009 0008 10:48:56 Msec=2250 True Az=162.39 Ze=38.505 Az status=0009 Ze status=0008 10:48:56 Check angles 10:48:56 SkyScan query 10:48:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 10:48:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 10:48:57 Check angles 10:48:57 SkyScan query 10:48:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:48:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:48:58 Message to Master queued w/err=0: serial=8273 error=0 10:49:03 Received message from Master: op=Filter serial=8274 10:49:03 Color wheel filter change from 0 to 0 10:49:03 FLIGetFilterPos err=0 currentPosition=0 10:49:03 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:03 Filter is already there-color wheel unchanged 10:49:03 Received message from Master: op=Shutter serial=8275 10:49:03 Shutter LASER close 10:49:03 Received message from Camera: op=State serial=8277 10:49:03 GetSingleValue result=40 Value=cccccccc 10:49:03 SkyScan query [UTC 2018-12-4 10:49:03] 10:49:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:49:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:03 Parameters OK 10:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:03 Set A/D data flow result=40 10:49:03 Set A/D channel type result=40 10:49:03 Set A/D encoding result=40 10:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:03 Set channel filter=0.000000e+000 result=40 10:49:03 Config A/D Result=40 10:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:03 Get A/D filter: -9.255963e+061 result=40 10:49:03 Get A/D value=-858993460 result=40 10:49:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:03 Parameters OK 10:49:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:03 Set A/D data flow result=40 10:49:03 Set A/D channel type result=40 10:49:03 Set A/D encoding result=40 10:49:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:03 Set channel filter=0.000000e+000 result=40 10:49:03 Config A/D Result=40 10:49:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:03 Get A/D filter: -9.255963e+061 result=40 10:49:03 Get A/D value=-858993460 result=40 10:49:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:03 Aux= 10:49:03 Message to Camera, serial 8277 queued 10:49:34 Received message from Master: op=PointingHead serial=8284 10:49:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:49:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:49:35 Point started: ret=0 10:49:35 point_skyscan result=0 10:49:35 Check angles 10:49:35 SkyScan query 10:49:36 SkyScan query done: ret=0 az=152.97<-10198 ze=8.745<-11417 Statuses=0009 0009 10:49:36 Msec=0 True Az=152.97 Ze=8.745 Az status=0009 Ze status=0009 10:49:36 Check angles 10:49:36 SkyScan query 10:49:37 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.645<-12843 Statuses=0009 0009 10:49:37 Msec=750 True Az=135.3 Ze=-12.645 Az status=0009 Ze status=0009 10:49:37 Check angles 10:49:37 SkyScan query 10:49:37 SkyScan query done: ret=0 az=117.75<-7850 ze=-33.615<-14241 Statuses=0009 0009 10:49:37 Msec=1500 True Az=117.75 Ze=-33.615 Az status=0009 Ze status=0009 10:49:38 Check angles 10:49:38 SkyScan query 10:49:38 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.555<-15437 Statuses=0009 0009 10:49:38 Msec=2250 True Az=100.02 Ze=-51.555 Az status=0009 Ze status=0009 10:49:38 Check angles 10:49:38 SkyScan query 10:49:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 10:49:39 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 10:49:39 Check angles 10:49:39 SkyScan query 10:49:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:49:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 10:49:40 Message to Master queued w/err=0: serial=8284 error=0 10:49:45 Received message from Master: op=Filter serial=8285 10:49:45 Color wheel filter change from 0 to 0 10:49:45 FLIGetFilterPos err=0 currentPosition=0 10:49:45 FLIGetStepsRemaining err=0 RemainingSteps=0 10:49:45 Filter is already there-color wheel unchanged 10:49:45 Received message from Master: op=Shutter serial=8286 10:49:45 Shutter LASER close 10:49:45 Received message from Camera: op=State serial=8288 10:49:45 GetSingleValue result=40 Value=cccccccc 10:49:45 SkyScan query 10:49:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:49:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:45 Parameters OK 10:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:45 Set A/D data flow result=40 10:49:45 Set A/D channel type result=40 10:49:45 Set A/D encoding result=40 10:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:45 Set channel filter=0.000000e+000 result=40 10:49:45 Config A/D Result=40 10:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:45 Get A/D filter: -9.255963e+061 result=40 10:49:45 Get A/D value=-858993460 result=40 10:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:49:45 Parameters OK 10:49:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:49:45 Set A/D data flow result=40 10:49:45 Set A/D channel type result=40 10:49:45 Set A/D encoding result=40 10:49:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:49:45 Set channel filter=0.000000e+000 result=40 10:49:45 Config A/D Result=40 10:49:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:49:45 Get A/D filter: -9.255963e+061 result=40 10:49:45 Get A/D value=-858993460 result=40 10:49:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:49:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:49:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:49:45 Aux= 10:49:45 Message to Camera, serial 8288 queued 10:50:16 Received message from Master: op=PointingHead serial=8295 10:50:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:50:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:50:17 Point started: ret=0 10:50:17 point_skyscan result=0 10:50:17 Check angles 10:50:17 SkyScan query 10:50:18 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.3<-17420 Statuses=0009 0009 10:50:18 Msec=0 True Az=108.99 Ze=-81.3 Az status=0009 Ze status=0009 10:50:18 Check angles 10:50:18 SkyScan query 10:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.675<-18845 Statuses=0008 0009 10:50:19 Msec=750 True Az=112.995 Ze=-102.675 Az status=0008 Ze status=0009 10:50:19 Check angles 10:50:19 SkyScan query 10:50:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 10:50:19 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 10:50:20 Check angles 10:50:20 SkyScan query 10:50:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 10:50:20 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 10:50:20 Check angles 10:50:20 SkyScan query 10:50:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 10:50:21 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 10:50:21 Check angles 10:50:21 SkyScan query 10:50:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 10:50:22 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 10:50:22 Message to Master queued w/err=0: serial=8295 error=0 10:50:27 Received message from Master: op=Filter serial=8296 10:50:27 Color wheel filter change from 0 to 0 10:50:27 FLIGetFilterPos err=0 currentPosition=0 10:50:27 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:27 Filter is already there-color wheel unchanged 10:50:27 Received message from Master: op=Shutter serial=8297 10:50:27 Shutter LASER open 10:50:27 Received message from Camera: op=State serial=8299 10:50:27 GetSingleValue result=40 Value=cccccccc 10:50:27 SkyScan query 10:50:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:50:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:28 Parameters OK 10:50:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:28 Set A/D data flow result=40 10:50:28 Set A/D channel type result=40 10:50:28 Set A/D encoding result=40 10:50:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:28 Set channel filter=0.000000e+000 result=40 10:50:28 Config A/D Result=40 10:50:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:28 Get A/D filter: -9.255963e+061 result=40 10:50:28 Get A/D value=-858993460 result=40 10:50:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:28 Parameters OK 10:50:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:28 Set A/D data flow result=40 10:50:28 Set A/D channel type result=40 10:50:28 Set A/D encoding result=40 10:50:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:28 Set channel filter=0.000000e+000 result=40 10:50:28 Config A/D Result=40 10:50:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:28 Get A/D filter: -9.255963e+061 result=40 10:50:28 Get A/D value=-858993460 result=40 10:50:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:28 Aux= 10:50:28 Message to Camera, serial 8299 queued 10:50:30 Received message from Master: op=Shutter serial=8303 10:50:30 Shutter LASER close 10:50:31 Received message from Master: op=PointingHead serial=8307 10:50:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:50:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:50:31 Point started: ret=0 10:50:31 point_skyscan result=0 10:50:32 Check angles 10:50:32 SkyScan query 10:50:32 SkyScan query done: ret=0 az=90.21<-6014 ze=157.5<-1500 Statuses=0009 0009 10:50:32 Msec=0 True Az=90.21 Ze=157.5 Az status=0009 Ze status=0009 10:50:32 Check angles 10:50:32 SkyScan query 10:50:33 SkyScan query done: ret=0 az=72.87<-4858 ze=136.545<-2897 Statuses=0009 0009 10:50:33 Msec=750 True Az=72.87 Ze=136.545 Az status=0009 Ze status=0009 10:50:33 Check angles 10:50:33 SkyScan query 10:50:34 SkyScan query done: ret=0 az=55.155<-3677 ze=115.59<-4294 Statuses=0009 0009 10:50:34 Msec=1500 True Az=55.155 Ze=115.59 Az status=0009 Ze status=0009 10:50:34 Check angles 10:50:34 SkyScan query 10:50:34 SkyScan query done: ret=0 az=40.83<-2722 ze=94.62<-5692 Statuses=0009 0009 10:50:34 Msec=2250 True Az=40.83 Ze=94.62 Az status=0009 Ze status=0009 10:50:35 Check angles 10:50:35 SkyScan query 10:50:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.695<-7087 Statuses=0008 0009 10:50:35 Msec=3000 True Az=40.995 Ze=73.695 Az status=0008 Ze status=0009 10:50:35 Check angles 10:50:35 SkyScan query 10:50:36 SkyScan query done: ret=0 az=40.995<-2733 ze=53.01<-8466 Statuses=0008 0009 10:50:36 Msec=3750 True Az=40.995 Ze=53.01 Az status=0008 Ze status=0009 10:50:36 Check angles 10:50:36 SkyScan query 10:50:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:50:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:50:37 Message to Master queued w/err=0: serial=8307 error=0 10:50:42 Received message from Master: op=Filter serial=8308 10:50:42 Color wheel filter change from 0 to 0 10:50:42 FLIGetFilterPos err=0 currentPosition=0 10:50:42 FLIGetStepsRemaining err=0 RemainingSteps=0 10:50:42 Filter is already there-color wheel unchanged 10:50:42 Received message from Master: op=Shutter serial=8309 10:50:42 Shutter LASER close 10:50:42 Received message from Camera: op=State serial=8311 10:50:42 GetSingleValue result=40 Value=cccccccc 10:50:42 SkyScan query 10:50:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:43 Parameters OK 10:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:43 Set A/D data flow result=40 10:50:43 Set A/D channel type result=40 10:50:43 Set A/D encoding result=40 10:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:43 Set channel filter=0.000000e+000 result=40 10:50:43 Config A/D Result=40 10:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:43 Get A/D filter: -9.255963e+061 result=40 10:50:43 Get A/D value=-858993460 result=40 10:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:50:43 Parameters OK 10:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:50:43 Set A/D data flow result=40 10:50:43 Set A/D channel type result=40 10:50:43 Set A/D encoding result=40 10:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:50:43 Set channel filter=0.000000e+000 result=40 10:50:43 Config A/D Result=40 10:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:50:43 Get A/D filter: -9.255963e+061 result=40 10:50:43 Get A/D value=-858993460 result=40 10:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:50:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:50:43 Aux= 10:50:43 Message to Camera, serial 8311 queued 10:51:14 Received message from Master: op=PointingHead serial=8318 10:51:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:51:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:51:14 Point started: ret=0 10:51:14 point_skyscan result=0 10:51:15 Check angles 10:51:15 SkyScan query 10:51:15 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 10:51:15 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 10:51:15 Check angles 10:51:15 SkyScan query 10:51:16 SkyScan query done: ret=0 az=81.96<-5464 ze=66.495<-7567 Statuses=0009 0008 10:51:16 Msec=750 True Az=81.96 Ze=66.495 Az status=0009 Ze status=0008 10:51:16 Check angles 10:51:16 SkyScan query 10:51:17 SkyScan query done: ret=0 az=99.75<-6650 ze=66.495<-7567 Statuses=0009 0008 10:51:17 Msec=1500 True Az=99.75 Ze=66.495 Az status=0009 Ze status=0008 10:51:17 Check angles 10:51:17 SkyScan query 10:51:18 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 10:51:18 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 10:51:18 Check angles 10:51:18 SkyScan query 10:51:18 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 10:51:18 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 10:51:18 Check angles 10:51:18 SkyScan query 10:51:19 SkyScan query done: ret=0 az=152.04<-10136 ze=66.495<-7567 Statuses=0009 0008 10:51:19 Msec=3750 True Az=152.04 Ze=66.495 Az status=0009 Ze status=0008 10:51:19 Check angles 10:51:19 SkyScan query 10:51:20 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:51:20 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:51:20 Message to Master queued w/err=0: serial=8318 error=0 10:51:25 Received message from Master: op=Filter serial=8319 10:51:25 Color wheel filter change from 0 to 0 10:51:25 FLIGetFilterPos err=0 currentPosition=0 10:51:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:51:25 Filter is already there-color wheel unchanged 10:51:25 Received message from Master: op=Shutter serial=8320 10:51:25 Shutter LASER close 10:51:25 Received message from Camera: op=State serial=8322 10:51:25 GetSingleValue result=40 Value=cccccccc 10:51:25 SkyScan query 10:51:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:51:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:26 Parameters OK 10:51:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:26 Set A/D data flow result=40 10:51:26 Set A/D channel type result=40 10:51:26 Set A/D encoding result=40 10:51:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:26 Set channel filter=0.000000e+000 result=40 10:51:26 Config A/D Result=40 10:51:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:26 Get A/D filter: -9.255963e+061 result=40 10:51:26 Get A/D value=-858993460 result=40 10:51:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:51:26 Parameters OK 10:51:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:51:26 Set A/D data flow result=40 10:51:26 Set A/D channel type result=40 10:51:26 Set A/D encoding result=40 10:51:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:51:26 Set channel filter=0.000000e+000 result=40 10:51:26 Config A/D Result=40 10:51:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:51:26 Get A/D filter: -9.255963e+061 result=40 10:51:26 Get A/D value=-858993460 result=40 10:51:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:51:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:51:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:51:26 Aux= 10:51:26 Message to Camera, serial 8322 queued 10:51:49 Received message from Master: op=Identify serial=8323 10:51:56 Received message from Master: op=PointingHead serial=8332 10:51:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:51:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:51:57 Point started: ret=0 10:51:57 point_skyscan result=0 10:51:58 Check angles 10:51:58 SkyScan query 10:51:58 SkyScan query done: ret=0 az=134.805<-8987 ze=36.495<-9567 Statuses=0009 0009 10:51:58 Msec=0 True Az=134.805 Ze=36.495 Az status=0009 Ze status=0009 10:51:58 Check angles 10:51:58 SkyScan query 10:51:59 SkyScan query done: ret=0 az=117.3<-7820 ze=15.54<-10964 Statuses=0009 0009 10:51:59 Msec=750 True Az=117.3 Ze=15.54 Az status=0009 Ze status=0009 10:51:59 Check angles 10:51:59 SkyScan query 10:52:00 SkyScan query done: ret=0 az=99.555<-6637 ze=-5.865<-12391 Statuses=0009 0009 10:52:00 Msec=1500 True Az=99.555 Ze=-5.865 Az status=0009 Ze status=0009 10:52:00 Check angles 10:52:00 SkyScan query 10:52:00 SkyScan query done: ret=0 az=81.735<-5449 ze=-27.24<-13816 Statuses=0009 0009 10:52:00 Msec=2250 True Az=81.735 Ze=-27.24 Az status=0009 Ze status=0009 10:52:01 Check angles 10:52:01 SkyScan query 10:52:01 SkyScan query done: ret=0 az=63.93<-4262 ze=-38.55<-14570 Statuses=0009 0008 10:52:01 Msec=3000 True Az=63.93 Ze=-38.55 Az status=0009 Ze status=0008 10:52:01 Check angles 10:52:01 SkyScan query 10:52:02 SkyScan query done: ret=0 az=46.47<-3098 ze=-38.535<-14569 Statuses=0009 0008 10:52:02 Msec=3750 True Az=46.47 Ze=-38.535 Az status=0009 Ze status=0008 10:52:02 Check angles 10:52:02 SkyScan query 10:52:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:52:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:52:03 Message to Master queued w/err=0: serial=8332 error=0 10:52:08 Received message from Master: op=Filter serial=8333 10:52:08 Color wheel filter change from 0 to 0 10:52:08 FLIGetFilterPos err=0 currentPosition=0 10:52:08 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:08 Filter is already there-color wheel unchanged 10:52:08 Received message from Master: op=Shutter serial=8334 10:52:08 Shutter LASER close 10:52:08 Received message from Camera: op=State serial=8336 10:52:08 GetSingleValue result=40 Value=cccccccc 10:52:08 SkyScan query 10:52:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:08 Parameters OK 10:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:08 Set A/D data flow result=40 10:52:08 Set A/D channel type result=40 10:52:08 Set A/D encoding result=40 10:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:08 Set channel filter=0.000000e+000 result=40 10:52:08 Config A/D Result=40 10:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:08 Get A/D filter: -9.255963e+061 result=40 10:52:08 Get A/D value=-858993460 result=40 10:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:08 Parameters OK 10:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:08 Set A/D data flow result=40 10:52:08 Set A/D channel type result=40 10:52:08 Set A/D encoding result=40 10:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:08 Set channel filter=0.000000e+000 result=40 10:52:08 Config A/D Result=40 10:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:08 Get A/D filter: -9.255963e+061 result=40 10:52:08 Get A/D value=-858993460 result=40 10:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:08 Aux= 10:52:08 Message to Camera, serial 8336 queued [UTC 2018-12-4 10:52:09] 10:52:39 Received message from Master: op=PointingHead serial=8343 10:52:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:52:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:52:40 Point started: ret=0 10:52:40 point_skyscan result=0 10:52:40 Check angles 10:52:40 SkyScan query 10:52:41 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.235<-16549 Statuses=0009 0009 10:52:41 Msec=0 True Az=63.825 Ze=-68.235 Az status=0009 Ze status=0009 10:52:41 Check angles 10:52:41 SkyScan query 10:52:42 SkyScan query done: ret=0 az=81.375<-5425 ze=-89.22<-17948 Statuses=0009 0009 10:52:42 Msec=750 True Az=81.375 Ze=-89.22 Az status=0009 Ze status=0009 10:52:42 Check angles 10:52:42 SkyScan query 10:52:42 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.595<-19373 Statuses=0009 0009 10:52:42 Msec=1500 True Az=99.33 Ze=-110.595 Az status=0009 Ze status=0009 10:52:43 Check angles 10:52:43 SkyScan query 10:52:43 SkyScan query done: ret=0 az=116.745<-7783 ze=-131.535<-20769 Statuses=0009 0009 10:52:43 Msec=2250 True Az=116.745 Ze=-131.535 Az status=0009 Ze status=0009 10:52:43 Check angles 10:52:43 SkyScan query 10:52:44 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.525<-21435 Statuses=0009 0008 10:52:44 Msec=3000 True Az=131.1 Ze=-141.525 Az status=0009 Ze status=0008 10:52:44 Check angles 10:52:44 SkyScan query 10:52:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 10:52:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 10:52:45 Message to Master queued w/err=0: serial=8343 error=0 10:52:50 Received message from Master: op=Filter serial=8344 10:52:50 Color wheel filter change from 0 to 0 10:52:50 FLIGetFilterPos err=0 currentPosition=0 10:52:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:52:50 Filter is already there-color wheel unchanged 10:52:50 Received message from Master: op=Shutter serial=8345 10:52:50 Shutter LASER close 10:52:50 Received message from Camera: op=State serial=8347 10:52:50 GetSingleValue result=40 Value=cccccccc 10:52:50 SkyScan query 10:52:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:52:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:51 Parameters OK 10:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:51 Set A/D data flow result=40 10:52:51 Set A/D channel type result=40 10:52:51 Set A/D encoding result=40 10:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:51 Set channel filter=0.000000e+000 result=40 10:52:51 Config A/D Result=40 10:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:51 Get A/D filter: -9.255963e+061 result=40 10:52:51 Get A/D value=-858993460 result=40 10:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:52:51 Parameters OK 10:52:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:52:51 Set A/D data flow result=40 10:52:51 Set A/D channel type result=40 10:52:51 Set A/D encoding result=40 10:52:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:52:51 Set channel filter=0.000000e+000 result=40 10:52:51 Config A/D Result=40 10:52:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:52:51 Get A/D filter: -9.255963e+061 result=40 10:52:51 Get A/D value=-858993460 result=40 10:52:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:52:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:52:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:52:51 Aux= 10:52:51 Message to Camera, serial 8347 queued 10:53:21 Received message from Master: op=PointingHead serial=8354 10:53:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:53:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:53:22 Point started: ret=0 10:53:22 point_skyscan result=0 10:53:23 Check angles 10:53:23 SkyScan query 10:53:23 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.33<-23422 Statuses=0009 0009 10:53:23 Msec=0 True Az=113.025 Ze=-171.33 Az status=0009 Ze status=0009 10:53:23 Check angles 10:53:23 SkyScan query 10:53:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:53:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:53:24 Message to Master queued w/err=0: serial=8354 error=0 10:53:29 Received message from Master: op=Filter serial=8355 10:53:29 Color wheel filter change from 0 to 0 10:53:29 FLIGetFilterPos err=0 currentPosition=0 10:53:29 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:29 Filter is already there-color wheel unchanged 10:53:29 Received message from Master: op=Shutter serial=8356 10:53:29 Shutter LASER open 10:53:29 Received message from Camera: op=State serial=8358 10:53:29 GetSingleValue result=40 Value=cccccccc 10:53:29 SkyScan query 10:53:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:53:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:30 Parameters OK 10:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:30 Set A/D data flow result=40 10:53:30 Set A/D channel type result=40 10:53:30 Set A/D encoding result=40 10:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:30 Set channel filter=0.000000e+000 result=40 10:53:30 Config A/D Result=40 10:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:30 Get A/D filter: -9.255963e+061 result=40 10:53:30 Get A/D value=-858993460 result=40 10:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:30 Parameters OK 10:53:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:30 Set A/D data flow result=40 10:53:30 Set A/D channel type result=40 10:53:30 Set A/D encoding result=40 10:53:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:30 Set channel filter=0.000000e+000 result=40 10:53:30 Config A/D Result=40 10:53:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:30 Get A/D filter: -9.255963e+061 result=40 10:53:30 Get A/D value=-858993460 result=40 10:53:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:30 Aux= 10:53:30 Message to Camera, serial 8358 queued 10:53:32 Received message from Master: op=Shutter serial=8362 10:53:32 Shutter LASER close 10:53:33 Received message from Master: op=PointingHead serial=8366 10:53:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:53:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:53:33 Point started: ret=0 10:53:33 point_skyscan result=0 10:53:34 Check angles 10:53:34 SkyScan query 10:53:34 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.445<-21563 Statuses=0009 0009 10:53:34 Msec=0 True Az=135.765 Ze=-143.445 Az status=0009 Ze status=0009 10:53:35 Check angles 10:53:35 SkyScan query 10:53:35 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.04<-20136 Statuses=0009 0009 10:53:35 Msec=750 True Az=153.63 Ze=-122.04 Az status=0009 Ze status=0009 10:53:35 Check angles 10:53:35 SkyScan query 10:53:36 SkyScan query done: ret=0 az=171<-11400 ze=-101.115<-18741 Statuses=0009 0009 10:53:36 Msec=1500 True Az=171 Ze=-101.115 Az status=0009 Ze status=0009 10:53:36 Check angles 10:53:36 SkyScan query 10:53:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 10:53:37 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 10:53:37 Check angles 10:53:37 SkyScan query 10:53:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 10:53:37 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 10:53:38 Check angles 10:53:38 SkyScan query 10:53:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:53:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:53:38 Message to Master queued w/err=0: serial=8366 error=0 10:53:43 Received message from Master: op=Filter serial=8367 10:53:43 Color wheel filter change from 0 to 0 10:53:43 FLIGetFilterPos err=0 currentPosition=0 10:53:43 FLIGetStepsRemaining err=0 RemainingSteps=0 10:53:43 Filter is already there-color wheel unchanged 10:53:43 Received message from Master: op=Shutter serial=8368 10:53:43 Shutter LASER close 10:53:44 Received message from Camera: op=State serial=8370 10:53:44 GetSingleValue result=40 Value=cccccccc 10:53:44 SkyScan query 10:53:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:53:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:44 Parameters OK 10:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:44 Set A/D data flow result=40 10:53:44 Set A/D channel type result=40 10:53:44 Set A/D encoding result=40 10:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:44 Set channel filter=0.000000e+000 result=40 10:53:44 Config A/D Result=40 10:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:44 Get A/D filter: -9.255963e+061 result=40 10:53:44 Get A/D value=-858993460 result=40 10:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:53:44 Parameters OK 10:53:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:53:44 Set A/D data flow result=40 10:53:44 Set A/D channel type result=40 10:53:44 Set A/D encoding result=40 10:53:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:53:44 Set channel filter=0.000000e+000 result=40 10:53:44 Config A/D Result=40 10:53:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:53:44 Get A/D filter: -9.255963e+061 result=40 10:53:44 Get A/D value=-858993460 result=40 10:53:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:53:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:53:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:53:44 Aux= 10:53:44 Message to Camera, serial 8370 queued 10:54:15 Received message from Master: op=PointingHead serial=8377 10:54:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 10:54:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 10:54:15 Point started: ret=0 10:54:15 point_skyscan result=0 10:54:16 Check angles 10:54:16 SkyScan query 10:54:17 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.75<-13450 Statuses=0009 0009 10:54:17 Msec=0 True Az=152.91 Ze=-21.75 Az status=0009 Ze status=0009 10:54:17 Check angles 10:54:17 SkyScan query 10:54:17 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.795<-12053 Statuses=0009 0009 10:54:17 Msec=750 True Az=135.435 Ze=-0.795 Az status=0009 Ze status=0009 10:54:18 Check angles 10:54:18 SkyScan query 10:54:18 SkyScan query done: ret=0 az=117.96<-7864 ze=20.16<-10656 Statuses=0009 0009 10:54:18 Msec=1500 True Az=117.96 Ze=20.16 Az status=0009 Ze status=0009 10:54:18 Check angles 10:54:18 SkyScan query 10:54:19 SkyScan query done: ret=0 az=100.575<-6705 ze=41.1<-9260 Statuses=0009 0009 10:54:19 Msec=2250 True Az=100.575 Ze=41.1 Az status=0009 Ze status=0009 10:54:19 Check angles 10:54:19 SkyScan query 10:54:20 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 10:54:20 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 10:54:20 Check angles 10:54:20 SkyScan query 10:54:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 10:54:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 10:54:20 Message to Master queued w/err=0: serial=8377 error=0 10:54:25 Received message from Master: op=Filter serial=8378 10:54:25 Color wheel filter change from 0 to 0 10:54:25 FLIGetFilterPos err=0 currentPosition=0 10:54:25 FLIGetStepsRemaining err=0 RemainingSteps=0 10:54:25 Filter is already there-color wheel unchanged 10:54:26 Received message from Master: op=Shutter serial=8379 10:54:26 Shutter LASER close 10:54:26 Received message from Camera: op=State serial=8381 10:54:26 GetSingleValue result=40 Value=cccccccc 10:54:26 SkyScan query 10:54:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 10:54:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:26 Parameters OK 10:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:26 Set A/D data flow result=40 10:54:26 Set A/D channel type result=40 10:54:26 Set A/D encoding result=40 10:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:26 Set channel filter=0.000000e+000 result=40 10:54:26 Config A/D Result=40 10:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:26 Get A/D filter: -9.255963e+061 result=40 10:54:26 Get A/D value=-858993460 result=40 10:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:54:26 Parameters OK 10:54:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:54:26 Set A/D data flow result=40 10:54:26 Set A/D channel type result=40 10:54:26 Set A/D encoding result=40 10:54:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:54:26 Set channel filter=0.000000e+000 result=40 10:54:26 Config A/D Result=40 10:54:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:54:26 Get A/D filter: -9.255963e+061 result=40 10:54:26 Get A/D value=-858993460 result=40 10:54:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:54:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:54:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:54:26 Aux= 10:54:26 Message to Camera, serial 8381 queued 10:54:57 Received message from Master: op=PointingHead serial=8388 10:54:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 10:54:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 10:54:57 Point started: ret=0 10:54:57 point_skyscan result=0 10:54:58 Check angles 10:54:58 SkyScan query 10:54:59 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 10:54:59 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 10:54:59 Check angles 10:54:59 SkyScan query 10:54:59 SkyScan query done: ret=0 az=126.645<-8443 ze=38.505<-9433 Statuses=0009 0008 10:54:59 Msec=750 True Az=126.645 Ze=38.505 Az status=0009 Ze status=0008 10:55:00 Check angles 10:55:00 SkyScan query 10:55:00 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 10:55:00 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 10:55:00 Check angles 10:55:00 SkyScan query 10:55:01 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 10:55:01 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 10:55:01 Check angles 10:55:01 SkyScan query 10:55:02 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 10:55:02 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 10:55:02 Check angles 10:55:02 SkyScan query 10:55:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 10:55:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 10:55:02 Message to Master queued w/err=0: serial=8388 error=0 10:55:07 Received message from Master: op=Filter serial=8389 10:55:07 Color wheel filter change from 0 to 0 10:55:07 FLIGetFilterPos err=0 currentPosition=0 10:55:07 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:07 Filter is already there-color wheel unchanged 10:55:08 Received message from Master: op=Shutter serial=8390 10:55:08 Shutter LASER close 10:55:08 Received message from Camera: op=State serial=8392 10:55:08 GetSingleValue result=40 Value=cccccccc 10:55:08 SkyScan query 10:55:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 10:55:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:08 Parameters OK 10:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:08 Set A/D data flow result=40 10:55:08 Set A/D channel type result=40 10:55:08 Set A/D encoding result=40 10:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:08 Set channel filter=0.000000e+000 result=40 10:55:08 Config A/D Result=40 10:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:08 Get A/D filter: -9.255963e+061 result=40 10:55:08 Get A/D value=-858993460 result=40 10:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:08 Parameters OK 10:55:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:08 Set A/D data flow result=40 10:55:08 Set A/D channel type result=40 10:55:08 Set A/D encoding result=40 10:55:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:08 Set channel filter=0.000000e+000 result=40 10:55:08 Config A/D Result=40 10:55:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:08 Get A/D filter: -9.255963e+061 result=40 10:55:08 Get A/D value=-858993460 result=40 10:55:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:08 Aux= 10:55:08 Message to Camera, serial 8392 queued 10:55:39 Received message from Master: op=PointingHead serial=8399 10:55:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 10:55:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 10:55:39 Point started: ret=0 10:55:39 point_skyscan result=0 10:55:40 Check angles 10:55:40 SkyScan query 10:55:41 SkyScan query done: ret=0 az=152.985<-10199 ze=8.655<-11423 Statuses=0009 0009 10:55:41 Msec=0 True Az=152.985 Ze=8.655 Az status=0009 Ze status=0009 10:55:41 Check angles 10:55:41 SkyScan query 10:55:42 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.27<-12818 Statuses=0009 0009 10:55:42 Msec=750 True Az=135.45 Ze=-12.27 Az status=0009 Ze status=0009 10:55:42 Check angles 10:55:42 SkyScan query 10:55:42 SkyScan query done: ret=0 az=117.975<-7865 ze=-33.24<-14216 Statuses=0009 0009 10:55:42 Msec=1500 True Az=117.975 Ze=-33.24 Az status=0009 Ze status=0009 10:55:42 Check angles 10:55:42 SkyScan query 10:55:43 SkyScan query done: ret=0 az=100.575<-6705 ze=-51.525<-15435 Statuses=0009 0009 10:55:43 Msec=2250 True Az=100.575 Ze=-51.525 Az status=0009 Ze status=0009 10:55:43 Check angles 10:55:43 SkyScan query 10:55:44 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 10:55:44 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 10:55:44 Check angles 10:55:44 SkyScan query 10:55:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 10:55:45 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 10:55:45 Message to Master queued w/err=0: serial=8399 error=0 10:55:50 Received message from Master: op=Filter serial=8400 10:55:50 Color wheel filter change from 0 to 0 10:55:50 FLIGetFilterPos err=0 currentPosition=0 10:55:50 FLIGetStepsRemaining err=0 RemainingSteps=0 10:55:50 Filter is already there-color wheel unchanged 10:55:50 Received message from Master: op=Shutter serial=8401 10:55:50 Shutter LASER close 10:55:50 Received message from Camera: op=State serial=8403 10:55:50 GetSingleValue result=40 Value=cccccccc 10:55:50 SkyScan query 10:55:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 10:55:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:50 Parameters OK 10:55:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:50 Set A/D data flow result=40 10:55:50 Set A/D channel type result=40 10:55:50 Set A/D encoding result=40 10:55:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:50 Set channel filter=0.000000e+000 result=40 10:55:50 Config A/D Result=40 10:55:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:50 Get A/D filter: -9.255963e+061 result=40 10:55:50 Get A/D value=-858993460 result=40 10:55:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:55:50 Parameters OK 10:55:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:55:50 Set A/D data flow result=40 10:55:50 Set A/D channel type result=40 10:55:50 Set A/D encoding result=40 10:55:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:55:50 Set channel filter=0.000000e+000 result=40 10:55:50 Config A/D Result=40 10:55:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:55:50 Get A/D filter: -9.255963e+061 result=40 10:55:50 Get A/D value=-858993460 result=40 10:55:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:55:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:55:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:55:50 Aux= 10:55:50 Message to Camera, serial 8403 queued 10:56:21 Received message from Master: op=PointingHead serial=8410 10:56:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:56:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:56:22 Point started: ret=0 10:56:22 point_skyscan result=0 10:56:22 Check angles 10:56:22 SkyScan query 10:56:23 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.015<-17401 Statuses=0009 0009 10:56:23 Msec=0 True Az=108.765 Ze=-81.015 Az status=0009 Ze status=0009 10:56:23 Check angles 10:56:23 SkyScan query 10:56:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.375<-18825 Statuses=0008 0009 10:56:24 Msec=750 True Az=112.995 Ze=-102.375 Az status=0008 Ze status=0009 10:56:24 Check angles 10:56:24 SkyScan query 10:56:24 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.345<-20223 Statuses=0008 0009 10:56:24 Msec=1500 True Az=113.01 Ze=-123.345 Az status=0008 Ze status=0009 10:56:25 Check angles 10:56:25 SkyScan query 10:56:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.285<-21619 Statuses=0008 0009 10:56:25 Msec=2250 True Az=112.995 Ze=-144.285 Az status=0008 Ze status=0009 10:56:25 Check angles 10:56:25 SkyScan query 10:56:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 10:56:26 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 10:56:26 Check angles 10:56:26 SkyScan query 10:56:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 10:56:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 10:56:27 Message to Master queued w/err=0: serial=8410 error=0 10:56:32 Received message from Master: op=Filter serial=8411 10:56:32 Color wheel filter change from 0 to 0 10:56:32 FLIGetFilterPos err=0 currentPosition=0 10:56:32 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:32 Filter is already there-color wheel unchanged 10:56:32 Received message from Master: op=Shutter serial=8412 10:56:32 Shutter LASER open 10:56:32 Received message from Camera: op=State serial=8414 10:56:32 GetSingleValue result=40 Value=cccccccc 10:56:32 SkyScan query 10:56:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:56:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:33 Parameters OK 10:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:33 Set A/D data flow result=40 10:56:33 Set A/D channel type result=40 10:56:33 Set A/D encoding result=40 10:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:33 Set channel filter=0.000000e+000 result=40 10:56:33 Config A/D Result=40 10:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:33 Get A/D filter: -9.255963e+061 result=40 10:56:33 Get A/D value=-858993460 result=40 10:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:33 Parameters OK 10:56:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:33 Set A/D data flow result=40 10:56:33 Set A/D channel type result=40 10:56:33 Set A/D encoding result=40 10:56:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:33 Set channel filter=0.000000e+000 result=40 10:56:33 Config A/D Result=40 10:56:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:33 Get A/D filter: -9.255963e+061 result=40 10:56:33 Get A/D value=-858993460 result=40 10:56:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:33 Aux= 10:56:33 Message to Camera, serial 8414 queued 10:56:35 Received message from Master: op=Shutter serial=8418 10:56:35 Shutter LASER close 10:56:36 Received message from Master: op=PointingHead serial=8422 10:56:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 10:56:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 10:56:36 Point started: ret=0 10:56:36 point_skyscan result=0 10:56:37 Check angles 10:56:37 SkyScan query 10:56:37 SkyScan query done: ret=0 az=89.625<-5975 ze=156.825<-1545 Statuses=0009 0009 10:56:37 Msec=0 True Az=89.625 Ze=156.825 Az status=0009 Ze status=0009 10:56:38 Check angles 10:56:38 SkyScan query 10:56:38 SkyScan query done: ret=0 az=71.745<-4783 ze=135.42<-2972 Statuses=0009 0009 10:56:38 Msec=750 True Az=71.745 Ze=135.42 Az status=0009 Ze status=0009 10:56:38 Check angles 10:56:38 SkyScan query 10:56:39 SkyScan query done: ret=0 az=54.45<-3630 ze=114.48<-4368 Statuses=0009 0009 10:56:39 Msec=1500 True Az=54.45 Ze=114.48 Az status=0009 Ze status=0009 10:56:39 Check angles 10:56:39 SkyScan query 10:56:40 SkyScan query done: ret=0 az=41.01<-2734 ze=93.09<-5794 Statuses=0009 0009 10:56:40 Msec=2250 True Az=41.01 Ze=93.09 Az status=0009 Ze status=0009 10:56:40 Check angles 10:56:40 SkyScan query 10:56:40 SkyScan query done: ret=0 az=40.995<-2733 ze=71.7<-7220 Statuses=0008 0009 10:56:40 Msec=3000 True Az=40.995 Ze=71.7 Az status=0008 Ze status=0009 10:56:41 Check angles 10:56:41 SkyScan query 10:56:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.81<-8546 Statuses=0008 0009 10:56:41 Msec=3750 True Az=40.995 Ze=51.81 Az status=0008 Ze status=0009 10:56:41 Check angles 10:56:41 SkyScan query 10:56:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 10:56:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 10:56:42 Message to Master queued w/err=0: serial=8422 error=0 10:56:47 Received message from Master: op=Filter serial=8423 10:56:47 Color wheel filter change from 0 to 0 10:56:47 FLIGetFilterPos err=0 currentPosition=0 10:56:47 FLIGetStepsRemaining err=0 RemainingSteps=0 10:56:47 Filter is already there-color wheel unchanged 10:56:47 Received message from Master: op=Shutter serial=8424 10:56:47 Shutter LASER close 10:56:47 Received message from Camera: op=State serial=8426 10:56:47 GetSingleValue result=40 Value=cccccccc 10:56:47 SkyScan query 10:56:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 10:56:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:48 Parameters OK 10:56:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:48 Set A/D data flow result=40 10:56:48 Set A/D channel type result=40 10:56:48 Set A/D encoding result=40 10:56:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:48 Set channel filter=0.000000e+000 result=40 10:56:48 Config A/D Result=40 10:56:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:48 Get A/D filter: -9.255963e+061 result=40 10:56:48 Get A/D value=-858993460 result=40 10:56:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:56:48 Parameters OK 10:56:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:56:48 Set A/D data flow result=40 10:56:48 Set A/D channel type result=40 10:56:48 Set A/D encoding result=40 10:56:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:56:48 Set channel filter=0.000000e+000 result=40 10:56:48 Config A/D Result=40 10:56:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:56:48 Get A/D filter: -9.255963e+061 result=40 10:56:48 Get A/D value=-858993460 result=40 10:56:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:56:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:56:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:56:48 Aux= 10:56:48 Message to Camera, serial 8426 queued 10:57:19 Received message from Master: op=PointingHead serial=8433 10:57:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 10:57:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 10:57:19 Point started: ret=0 10:57:19 point_skyscan result=0 10:57:20 Check angles 10:57:20 SkyScan query 10:57:20 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 10:57:20 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 10:57:21 Check angles 10:57:21 SkyScan query 10:57:21 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 10:57:21 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 10:57:21 Check angles 10:57:21 SkyScan query 10:57:22 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 10:57:22 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 10:57:22 Check angles 10:57:22 SkyScan query 10:57:23 SkyScan query done: ret=0 az=117.045<-7803 ze=66.495<-7567 Statuses=0009 0008 10:57:23 Msec=2250 True Az=117.045 Ze=66.495 Az status=0009 Ze status=0008 10:57:23 Check angles 10:57:23 SkyScan query 10:57:23 SkyScan query done: ret=0 az=134.505<-8967 ze=66.495<-7567 Statuses=0009 0008 10:57:23 Msec=3000 True Az=134.505 Ze=66.495 Az status=0009 Ze status=0008 10:57:24 Check angles 10:57:24 SkyScan query 10:57:24 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 10:57:24 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 10:57:24 Check angles 10:57:24 SkyScan query 10:57:25 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 10:57:25 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 10:57:25 Message to Master queued w/err=0: serial=8433 error=0 10:57:30 Received message from Master: op=Filter serial=8434 10:57:30 Color wheel filter change from 0 to 0 10:57:30 FLIGetFilterPos err=0 currentPosition=0 10:57:30 FLIGetStepsRemaining err=0 RemainingSteps=0 10:57:30 Filter is already there-color wheel unchanged 10:57:30 Received message from Master: op=Shutter serial=8435 10:57:30 Shutter LASER close 10:57:30 Received message from Camera: op=State serial=8437 10:57:30 GetSingleValue result=40 Value=cccccccc 10:57:30 SkyScan query 10:57:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 10:57:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:31 Parameters OK 10:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:31 Set A/D data flow result=40 10:57:31 Set A/D channel type result=40 10:57:31 Set A/D encoding result=40 10:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:31 Set channel filter=0.000000e+000 result=40 10:57:31 Config A/D Result=40 10:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:31 Get A/D filter: -9.255963e+061 result=40 10:57:31 Get A/D value=-858993460 result=40 10:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:57:31 Parameters OK 10:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:57:31 Set A/D data flow result=40 10:57:31 Set A/D channel type result=40 10:57:31 Set A/D encoding result=40 10:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:57:31 Set channel filter=0.000000e+000 result=40 10:57:31 Config A/D Result=40 10:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:57:31 Get A/D filter: -9.255963e+061 result=40 10:57:31 Get A/D value=-858993460 result=40 10:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:57:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:57:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:57:31 Aux= 10:57:31 Message to Camera, serial 8437 queued 10:58:02 Received message from Master: op=PointingHead serial=8444 10:58:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 10:58:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 10:58:02 Point started: ret=0 10:58:02 point_skyscan result=0 10:58:03 Check angles 10:58:03 SkyScan query 10:58:03 SkyScan query done: ret=0 az=135.03<-9002 ze=36.69<-9554 Statuses=0009 0009 10:58:03 Msec=0 True Az=135.03 Ze=36.69 Az status=0009 Ze status=0009 10:58:03 Check angles 10:58:03 SkyScan query 10:58:04 SkyScan query done: ret=0 az=117.09<-7806 ze=15.3<-10980 Statuses=0009 0009 10:58:04 Msec=750 True Az=117.09 Ze=15.3 Az status=0009 Ze status=0009 10:58:04 Check angles 10:58:04 SkyScan query 10:58:05 SkyScan query done: ret=0 az=99.705<-6647 ze=-5.67<-12378 Statuses=0009 0009 10:58:05 Msec=1500 True Az=99.705 Ze=-5.67 Az status=0009 Ze status=0009 10:58:05 Check angles 10:58:05 SkyScan query 10:58:05 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.625<-13775 Statuses=0009 0009 10:58:05 Msec=2250 True Az=82.23 Ze=-26.625 Az status=0009 Ze status=0009 10:58:06 Check angles 10:58:06 SkyScan query 10:58:06 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 10:58:06 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 10:58:06 Check angles 10:58:06 SkyScan query 10:58:07 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 10:58:07 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 10:58:07 Check angles 10:58:07 SkyScan query 10:58:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:58:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 10:58:08 Message to Master queued w/err=0: serial=8444 error=0 10:58:13 Received message from Master: op=Filter serial=8445 10:58:13 Color wheel filter change from 0 to 0 10:58:13 FLIGetFilterPos err=0 currentPosition=0 10:58:13 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:13 Filter is already there-color wheel unchanged 10:58:13 Received message from Master: op=Shutter serial=8446 10:58:13 Shutter LASER close 10:58:13 Received message from Camera: op=State serial=8448 10:58:13 GetSingleValue result=40 Value=cccccccc 10:58:13 SkyScan query 10:58:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 10:58:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:14 Parameters OK 10:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:14 Set A/D data flow result=40 10:58:14 Set A/D channel type result=40 10:58:14 Set A/D encoding result=40 10:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:14 Set channel filter=0.000000e+000 result=40 10:58:14 Config A/D Result=40 10:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:14 Get A/D filter: -9.255963e+061 result=40 10:58:14 Get A/D value=-858993460 result=40 10:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:14 Parameters OK 10:58:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:14 Set A/D data flow result=40 10:58:14 Set A/D channel type result=40 10:58:14 Set A/D encoding result=40 10:58:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:14 Set channel filter=0.000000e+000 result=40 10:58:14 Config A/D Result=40 10:58:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:14 Get A/D filter: -9.255963e+061 result=40 10:58:14 Get A/D value=-858993460 result=40 10:58:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:14 Aux= 10:58:14 Message to Camera, serial 8448 queued 10:58:44 Received message from Master: op=PointingHead serial=8455 10:58:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 10:58:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 10:58:45 Point started: ret=0 10:58:45 point_skyscan result=0 10:58:45 Check angles 10:58:45 SkyScan query 10:58:46 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.43<-16562 Statuses=0009 0009 10:58:46 Msec=0 True Az=63.96 Ze=-68.43 Az status=0009 Ze status=0009 10:58:46 Check angles 10:58:46 SkyScan query 10:58:47 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.4<-17960 Statuses=0009 0009 10:58:47 Msec=750 True Az=81.675 Ze=-89.4 Az status=0009 Ze status=0009 10:58:47 Check angles 10:58:47 SkyScan query 10:58:48 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.34<-19356 Statuses=0009 0009 10:58:48 Msec=1500 True Az=98.97 Ze=-110.34 Az status=0009 Ze status=0009 10:58:48 Check angles 10:58:48 SkyScan query 10:58:48 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.28<-20752 Statuses=0009 0009 10:58:48 Msec=2250 True Az=116.445 Ze=-131.28 Az status=0009 Ze status=0009 10:58:48 Check angles 10:58:48 SkyScan query 10:58:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0009 0008 10:58:49 Msec=3000 True Az=130.995 Ze=-141.525 Az status=0009 Ze status=0008 10:58:49 Check angles 10:58:49 SkyScan query 10:58:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 10:58:50 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 10:58:50 Message to Master queued w/err=0: serial=8455 error=0 10:58:55 Received message from Master: op=Filter serial=8456 10:58:55 Color wheel filter change from 0 to 0 10:58:55 FLIGetFilterPos err=0 currentPosition=0 10:58:55 FLIGetStepsRemaining err=0 RemainingSteps=0 10:58:55 Filter is already there-color wheel unchanged 10:58:55 Received message from Master: op=Shutter serial=8457 10:58:55 Shutter LASER close 10:58:55 Received message from Camera: op=State serial=8459 10:58:55 GetSingleValue result=40 Value=cccccccc 10:58:55 SkyScan query 10:58:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 10:58:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:56 Parameters OK 10:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:56 Set A/D data flow result=40 10:58:56 Set A/D channel type result=40 10:58:56 Set A/D encoding result=40 10:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:56 Set channel filter=0.000000e+000 result=40 10:58:56 Config A/D Result=40 10:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:56 Get A/D filter: -9.255963e+061 result=40 10:58:56 Get A/D value=-858993460 result=40 10:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:58:56 Parameters OK 10:58:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:58:56 Set A/D data flow result=40 10:58:56 Set A/D channel type result=40 10:58:56 Set A/D encoding result=40 10:58:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:58:56 Set channel filter=0.000000e+000 result=40 10:58:56 Config A/D Result=40 10:58:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:58:56 Get A/D filter: -9.255963e+061 result=40 10:58:56 Get A/D value=-858993460 result=40 10:58:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:58:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:58:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:58:56 Aux= 10:58:56 Message to Camera, serial 8459 queued 10:59:26 Received message from Master: op=PointingHead serial=8466 10:59:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 10:59:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 10:59:27 Point started: ret=0 10:59:27 point_skyscan result=0 10:59:28 Check angles 10:59:28 SkyScan query 10:59:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 10:59:28 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 10:59:28 Check angles 10:59:28 SkyScan query 10:59:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 10:59:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 10:59:29 Message to Master queued w/err=0: serial=8466 error=0 10:59:34 Received message from Master: op=Filter serial=8467 10:59:34 Color wheel filter change from 0 to 0 10:59:34 FLIGetFilterPos err=0 currentPosition=0 10:59:34 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:34 Filter is already there-color wheel unchanged 10:59:34 Received message from Master: op=Shutter serial=8468 10:59:34 Shutter LASER open 10:59:34 Received message from Camera: op=State serial=8470 10:59:34 GetSingleValue result=40 Value=cccccccc 10:59:34 SkyScan query 10:59:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 10:59:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:35 Parameters OK 10:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:35 Set A/D data flow result=40 10:59:35 Set A/D channel type result=40 10:59:35 Set A/D encoding result=40 10:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:35 Set channel filter=0.000000e+000 result=40 10:59:35 Config A/D Result=40 10:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:35 Get A/D filter: -9.255963e+061 result=40 10:59:35 Get A/D value=-858993460 result=40 10:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:35 Parameters OK 10:59:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:35 Set A/D data flow result=40 10:59:35 Set A/D channel type result=40 10:59:35 Set A/D encoding result=40 10:59:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:35 Set channel filter=0.000000e+000 result=40 10:59:35 Config A/D Result=40 10:59:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:35 Get A/D filter: -9.255963e+061 result=40 10:59:35 Get A/D value=-858993460 result=40 10:59:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:35 Aux= 10:59:35 Message to Camera, serial 8470 queued 10:59:37 Received message from Master: op=Shutter serial=8474 10:59:37 Shutter LASER close 10:59:38 Received message from Master: op=PointingHead serial=8478 10:59:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 10:59:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 10:59:38 Point started: ret=0 10:59:38 point_skyscan result=0 10:59:39 Check angles 10:59:39 SkyScan query 10:59:40 SkyScan query done: ret=0 az=136.05<-9070 ze=-143.31<-21554 Statuses=0009 0009 10:59:40 Msec=0 True Az=136.05 Ze=-143.31 Az status=0009 Ze status=0009 10:59:40 Check angles 10:59:40 SkyScan query 10:59:40 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.235<-20149 Statuses=0009 0009 10:59:40 Msec=750 True Az=153.63 Ze=-122.235 Az status=0009 Ze status=0009 10:59:41 Check angles 10:59:41 SkyScan query 10:59:41 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.98<-18732 Statuses=0009 0009 10:59:41 Msec=1500 True Az=171.285 Ze=-100.98 Az status=0009 Ze status=0009 10:59:41 Check angles 10:59:41 SkyScan query 10:59:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.575<-17305 Statuses=0008 0009 10:59:42 Msec=2250 True Az=176.01 Ze=-79.575 Az status=0008 Ze status=0009 10:59:42 Check angles 10:59:42 SkyScan query 10:59:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.605<-15907 Statuses=0008 0009 10:59:43 Msec=3000 True Az=176.01 Ze=-58.605 Az status=0008 Ze status=0009 10:59:43 Check angles 10:59:43 SkyScan query 10:59:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 10:59:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 10:59:43 Message to Master queued w/err=0: serial=8478 error=0 10:59:48 Received message from Master: op=Filter serial=8479 10:59:48 Color wheel filter change from 0 to 0 10:59:48 FLIGetFilterPos err=0 currentPosition=0 10:59:48 FLIGetStepsRemaining err=0 RemainingSteps=0 10:59:48 Filter is already there-color wheel unchanged 10:59:49 Received message from Master: op=Shutter serial=8480 10:59:49 Shutter LASER close 10:59:49 Received message from Camera: op=State serial=8482 10:59:49 GetSingleValue result=40 Value=cccccccc 10:59:49 SkyScan query 10:59:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 10:59:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:49 Parameters OK 10:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:49 Set A/D data flow result=40 10:59:49 Set A/D channel type result=40 10:59:49 Set A/D encoding result=40 10:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:49 Set channel filter=0.000000e+000 result=40 10:59:49 Config A/D Result=40 10:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:49 Get A/D filter: -9.255963e+061 result=40 10:59:49 Get A/D value=-858993460 result=40 10:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 10:59:49 Parameters OK 10:59:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 10:59:49 Set A/D data flow result=40 10:59:49 Set A/D channel type result=40 10:59:49 Set A/D encoding result=40 10:59:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 10:59:49 Set channel filter=0.000000e+000 result=40 10:59:49 Config A/D Result=40 10:59:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 10:59:49 Get A/D filter: -9.255963e+061 result=40 10:59:49 Get A/D value=-858993460 result=40 10:59:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 10:59:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 10:59:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 10:59:49 Aux= 10:59:49 Message to Camera, serial 8482 queued 11:00:20 Received message from Master: op=PointingHead serial=8489 11:00:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:00:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:00:20 Point started: ret=0 11:00:20 point_skyscan result=0 11:00:21 Check angles 11:00:21 SkyScan query 11:00:22 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.495<-13433 Statuses=0009 0009 11:00:22 Msec=0 True Az=152.775 Ze=-21.495 Az status=0009 Ze status=0009 11:00:22 Check angles 11:00:22 SkyScan query 11:00:23 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.525<-12035 Statuses=0009 0009 11:00:23 Msec=750 True Az=135.345 Ze=-0.525 Az status=0009 Ze status=0009 11:00:23 Check angles 11:00:23 SkyScan query 11:00:23 SkyScan query done: ret=0 az=117.84<-7856 ze=20.415<-10639 Statuses=0009 0009 11:00:23 Msec=1500 True Az=117.84 Ze=20.415 Az status=0009 Ze status=0009 11:00:23 Check angles 11:00:23 SkyScan query 11:00:24 SkyScan query done: ret=0 az=100.44<-6696 ze=41.385<-9241 Statuses=0009 0009 11:00:24 Msec=2250 True Az=100.44 Ze=41.385 Az status=0009 Ze status=0009 11:00:24 Check angles 11:00:24 SkyScan query 11:00:25 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:00:25 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:00:25 Check angles 11:00:25 SkyScan query 11:00:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:00:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:00:26 Message to Master queued w/err=0: serial=8489 error=0 11:00:31 Received message from Master: op=Filter serial=8490 11:00:31 Color wheel filter change from 0 to 0 11:00:31 FLIGetFilterPos err=0 currentPosition=0 11:00:31 FLIGetStepsRemaining err=0 RemainingSteps=0 11:00:31 Filter is already there-color wheel unchanged 11:00:31 Received message from Master: op=Shutter serial=8491 11:00:31 Shutter LASER close 11:00:31 Received message from Camera: op=State serial=8493 11:00:31 GetSingleValue result=40 Value=cccccccc 11:00:31 SkyScan query 11:00:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:00:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:31 Parameters OK 11:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:31 Set A/D data flow result=40 11:00:31 Set A/D channel type result=40 11:00:31 Set A/D encoding result=40 11:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:31 Set channel filter=0.000000e+000 result=40 11:00:31 Config A/D Result=40 11:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:31 Get A/D filter: -9.255963e+061 result=40 11:00:31 Get A/D value=-858993460 result=40 11:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:00:31 Parameters OK 11:00:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:00:31 Set A/D data flow result=40 11:00:31 Set A/D channel type result=40 11:00:31 Set A/D encoding result=40 11:00:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:00:31 Set channel filter=0.000000e+000 result=40 11:00:31 Config A/D Result=40 11:00:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:00:31 Get A/D filter: -9.255963e+061 result=40 11:00:31 Get A/D value=-858993460 result=40 11:00:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:00:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:00:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:00:31 Aux= 11:00:31 Message to Camera, serial 8493 queued 11:01:02 Received message from Master: op=PointingHead serial=8500 11:01:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:01:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:01:03 Point started: ret=0 11:01:03 point_skyscan result=0 11:01:03 Check angles 11:01:03 SkyScan query 11:01:04 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 11:01:04 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 11:01:04 Check angles 11:01:04 SkyScan query 11:01:05 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 11:01:05 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 11:01:05 Check angles 11:01:05 SkyScan query 11:01:05 SkyScan query done: ret=0 az=143.85<-9590 ze=38.505<-9433 Statuses=0009 0008 11:01:05 Msec=1500 True Az=143.85 Ze=38.505 Az status=0009 Ze status=0008 11:01:06 Check angles 11:01:06 SkyScan query [UTC 2018-12-4 11:01:06] 11:01:06 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 11:01:06 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 11:01:06 Check angles 11:01:06 SkyScan query 11:01:07 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:01:07 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:01:07 Check angles 11:01:07 SkyScan query 11:01:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:01:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:01:08 Message to Master queued w/err=0: serial=8500 error=0 11:01:13 Received message from Master: op=Filter serial=8501 11:01:13 Color wheel filter change from 0 to 0 11:01:13 FLIGetFilterPos err=0 currentPosition=0 11:01:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:13 Filter is already there-color wheel unchanged 11:01:13 Received message from Master: op=Shutter serial=8502 11:01:13 Shutter LASER close 11:01:13 Received message from Camera: op=State serial=8504 11:01:13 GetSingleValue result=40 Value=cccccccc 11:01:13 SkyScan query 11:01:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:01:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:13 Parameters OK 11:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:13 Set A/D data flow result=40 11:01:13 Set A/D channel type result=40 11:01:13 Set A/D encoding result=40 11:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:13 Set channel filter=0.000000e+000 result=40 11:01:13 Config A/D Result=40 11:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:13 Get A/D filter: -9.255963e+061 result=40 11:01:13 Get A/D value=-858993460 result=40 11:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:13 Parameters OK 11:01:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:13 Set A/D data flow result=40 11:01:13 Set A/D channel type result=40 11:01:13 Set A/D encoding result=40 11:01:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:13 Set channel filter=0.000000e+000 result=40 11:01:13 Config A/D Result=40 11:01:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:13 Get A/D filter: -9.255963e+061 result=40 11:01:13 Get A/D value=-858993460 result=40 11:01:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:13 Aux= 11:01:13 Message to Camera, serial 8504 queued 11:01:44 Received message from Master: op=PointingHead serial=8511 11:01:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:01:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:01:45 Point started: ret=0 11:01:45 point_skyscan result=0 11:01:45 Check angles 11:01:45 SkyScan query 11:01:46 SkyScan query done: ret=0 az=152.61<-10174 ze=8.175<-11455 Statuses=0009 0009 11:01:46 Msec=0 True Az=152.61 Ze=8.175 Az status=0009 Ze status=0009 11:01:46 Check angles 11:01:46 SkyScan query 11:01:47 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.765<-12851 Statuses=0009 0009 11:01:47 Msec=750 True Az=135.18 Ze=-12.765 Az status=0009 Ze status=0009 11:01:47 Check angles 11:01:47 SkyScan query 11:01:48 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.69<-14246 Statuses=0009 0009 11:01:48 Msec=1500 True Az=117.615 Ze=-33.69 Az status=0009 Ze status=0009 11:01:48 Check angles 11:01:48 SkyScan query 11:01:48 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 11:01:48 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 11:01:48 Check angles 11:01:48 SkyScan query 11:01:49 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 11:01:49 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 11:01:49 Check angles 11:01:49 SkyScan query 11:01:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:01:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:01:50 Message to Master queued w/err=0: serial=8511 error=0 11:01:55 Received message from Master: op=Filter serial=8512 11:01:55 Color wheel filter change from 0 to 0 11:01:55 FLIGetFilterPos err=0 currentPosition=0 11:01:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:01:55 Filter is already there-color wheel unchanged 11:01:55 Received message from Master: op=Shutter serial=8513 11:01:55 Shutter LASER close 11:01:55 Received message from Camera: op=State serial=8515 11:01:55 GetSingleValue result=40 Value=cccccccc 11:01:55 SkyScan query 11:01:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:01:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:56 Parameters OK 11:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:56 Set A/D data flow result=40 11:01:56 Set A/D channel type result=40 11:01:56 Set A/D encoding result=40 11:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:56 Set channel filter=0.000000e+000 result=40 11:01:56 Config A/D Result=40 11:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:56 Get A/D filter: -9.255963e+061 result=40 11:01:56 Get A/D value=-858993460 result=40 11:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:01:56 Parameters OK 11:01:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:01:56 Set A/D data flow result=40 11:01:56 Set A/D channel type result=40 11:01:56 Set A/D encoding result=40 11:01:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:01:56 Set channel filter=0.000000e+000 result=40 11:01:56 Config A/D Result=40 11:01:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:01:56 Get A/D filter: -9.255963e+061 result=40 11:01:56 Get A/D value=-858993460 result=40 11:01:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:01:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:01:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:01:56 Aux= 11:01:56 Message to Camera, serial 8515 queued 11:02:26 Received message from Master: op=PointingHead serial=8522 11:02:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:02:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:02:27 Point started: ret=0 11:02:27 point_skyscan result=0 11:02:28 Check angles 11:02:28 SkyScan query 11:02:28 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.51<-17434 Statuses=0009 0009 11:02:28 Msec=0 True Az=109.17 Ze=-81.51 Az status=0009 Ze status=0009 11:02:28 Check angles 11:02:28 SkyScan query 11:02:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.45<-18830 Statuses=0008 0009 11:02:29 Msec=750 True Az=113.01 Ze=-102.45 Az status=0008 Ze status=0009 11:02:29 Check angles 11:02:29 SkyScan query 11:02:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.405<-20227 Statuses=0008 0009 11:02:30 Msec=1500 True Az=113.01 Ze=-123.405 Az status=0008 Ze status=0009 11:02:30 Check angles 11:02:30 SkyScan query 11:02:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 11:02:30 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 11:02:31 Check angles 11:02:31 SkyScan query 11:02:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.155<-23077 Statuses=0008 0009 11:02:31 Msec=3000 True Az=112.995 Ze=-166.155 Az status=0008 Ze status=0009 11:02:31 Check angles 11:02:31 SkyScan query 11:02:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:02:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:02:32 Message to Master queued w/err=0: serial=8522 error=0 11:02:37 Received message from Master: op=Filter serial=8523 11:02:37 Color wheel filter change from 0 to 0 11:02:37 FLIGetFilterPos err=0 currentPosition=0 11:02:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:37 Filter is already there-color wheel unchanged 11:02:37 Received message from Master: op=Shutter serial=8524 11:02:37 Shutter LASER open 11:02:37 Received message from Camera: op=State serial=8526 11:02:37 GetSingleValue result=40 Value=cccccccc 11:02:37 SkyScan query 11:02:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:02:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:38 Parameters OK 11:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:38 Set A/D data flow result=40 11:02:38 Set A/D channel type result=40 11:02:38 Set A/D encoding result=40 11:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:38 Set channel filter=0.000000e+000 result=40 11:02:38 Config A/D Result=40 11:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:38 Get A/D filter: -9.255963e+061 result=40 11:02:38 Get A/D value=-858993460 result=40 11:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:38 Parameters OK 11:02:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:38 Set A/D data flow result=40 11:02:38 Set A/D channel type result=40 11:02:38 Set A/D encoding result=40 11:02:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:38 Set channel filter=0.000000e+000 result=40 11:02:38 Config A/D Result=40 11:02:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:38 Get A/D filter: -9.255963e+061 result=40 11:02:38 Get A/D value=-858993460 result=40 11:02:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:38 Aux= 11:02:38 Message to Camera, serial 8526 queued 11:02:40 Received message from Master: op=Shutter serial=8530 11:02:40 Shutter LASER close 11:02:41 Received message from Master: op=PointingHead serial=8534 11:02:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:02:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:02:41 Point started: ret=0 11:02:41 point_skyscan result=0 11:02:42 Check angles 11:02:42 SkyScan query 11:02:42 SkyScan query done: ret=0 az=89.715<-5981 ze=157.155<-1523 Statuses=0009 0009 11:02:42 Msec=0 True Az=89.715 Ze=157.155 Az status=0009 Ze status=0009 11:02:43 Check angles 11:02:43 SkyScan query 11:02:43 SkyScan query done: ret=0 az=72.39<-4826 ze=136.185<-2921 Statuses=0009 0009 11:02:43 Msec=750 True Az=72.39 Ze=136.185 Az status=0009 Ze status=0009 11:02:43 Check angles 11:02:43 SkyScan query 11:02:44 SkyScan query done: ret=0 az=54.84<-3656 ze=115.26<-4316 Statuses=0009 0009 11:02:44 Msec=1500 True Az=54.84 Ze=115.26 Az status=0009 Ze status=0009 11:02:44 Check angles 11:02:44 SkyScan query 11:02:45 SkyScan query done: ret=0 az=40.875<-2725 ze=93.84<-5744 Statuses=0009 0009 11:02:45 Msec=2250 True Az=40.875 Ze=93.84 Az status=0009 Ze status=0009 11:02:45 Check angles 11:02:45 SkyScan query 11:02:45 SkyScan query done: ret=0 az=41.01<-2734 ze=72.885<-7141 Statuses=0008 0009 11:02:45 Msec=3000 True Az=41.01 Ze=72.885 Az status=0008 Ze status=0009 11:02:46 Check angles 11:02:46 SkyScan query 11:02:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.26<-8516 Statuses=0008 0009 11:02:46 Msec=3750 True Az=40.995 Ze=52.26 Az status=0008 Ze status=0009 11:02:46 Check angles 11:02:46 SkyScan query 11:02:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:02:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:02:47 Message to Master queued w/err=0: serial=8534 error=0 11:02:52 Received message from Master: op=Filter serial=8535 11:02:52 Color wheel filter change from 0 to 0 11:02:52 FLIGetFilterPos err=0 currentPosition=0 11:02:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:02:52 Filter is already there-color wheel unchanged 11:02:52 Received message from Master: op=Shutter serial=8536 11:02:52 Shutter LASER close 11:02:52 Received message from Camera: op=State serial=8538 11:02:52 GetSingleValue result=40 Value=cccccccc 11:02:52 SkyScan query 11:02:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:02:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:53 Parameters OK 11:02:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:53 Set A/D data flow result=40 11:02:53 Set A/D channel type result=40 11:02:53 Set A/D encoding result=40 11:02:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:53 Set channel filter=0.000000e+000 result=40 11:02:53 Config A/D Result=40 11:02:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:53 Get A/D filter: -9.255963e+061 result=40 11:02:53 Get A/D value=-858993460 result=40 11:02:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:02:53 Parameters OK 11:02:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:02:53 Set A/D data flow result=40 11:02:53 Set A/D channel type result=40 11:02:53 Set A/D encoding result=40 11:02:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:02:53 Set channel filter=0.000000e+000 result=40 11:02:53 Config A/D Result=40 11:02:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:02:53 Get A/D filter: -9.255963e+061 result=40 11:02:53 Get A/D value=-858993460 result=40 11:02:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:02:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:02:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:02:53 Aux= 11:02:53 Message to Camera, serial 8538 queued 11:03:24 Received message from Master: op=PointingHead serial=8545 11:03:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:03:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:03:24 Point started: ret=0 11:03:24 point_skyscan result=0 11:03:25 Check angles 11:03:25 SkyScan query 11:03:25 SkyScan query done: ret=0 az=63.825<-4255 ze=66.555<-7563 Statuses=0009 0008 11:03:25 Msec=0 True Az=63.825 Ze=66.555 Az status=0009 Ze status=0008 11:03:26 Check angles 11:03:26 SkyScan query 11:03:26 SkyScan query done: ret=0 az=81.75<-5450 ze=66.495<-7567 Statuses=0009 0008 11:03:26 Msec=750 True Az=81.75 Ze=66.495 Az status=0009 Ze status=0008 11:03:26 Check angles 11:03:26 SkyScan query 11:03:27 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 11:03:27 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 11:03:27 Check angles 11:03:27 SkyScan query 11:03:28 SkyScan query done: ret=0 az=117.09<-7806 ze=66.495<-7567 Statuses=0009 0008 11:03:28 Msec=2250 True Az=117.09 Ze=66.495 Az status=0009 Ze status=0008 11:03:28 Check angles 11:03:28 SkyScan query 11:03:28 SkyScan query done: ret=0 az=134.46<-8964 ze=66.495<-7567 Statuses=0009 0008 11:03:28 Msec=3000 True Az=134.46 Ze=66.495 Az status=0009 Ze status=0008 11:03:29 Check angles 11:03:29 SkyScan query 11:03:29 SkyScan query done: ret=0 az=151.785<-10119 ze=66.495<-7567 Statuses=0009 0008 11:03:29 Msec=3750 True Az=151.785 Ze=66.495 Az status=0009 Ze status=0008 11:03:29 Check angles 11:03:29 SkyScan query 11:03:30 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:03:30 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:03:30 Message to Master queued w/err=0: serial=8545 error=0 11:03:35 Received message from Master: op=Filter serial=8546 11:03:35 Color wheel filter change from 0 to 0 11:03:35 FLIGetFilterPos err=0 currentPosition=0 11:03:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:03:35 Filter is already there-color wheel unchanged 11:03:35 Received message from Master: op=Shutter serial=8547 11:03:35 Shutter LASER close 11:03:35 Received message from Camera: op=State serial=8549 11:03:35 GetSingleValue result=40 Value=cccccccc 11:03:35 SkyScan query 11:03:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:03:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:36 Parameters OK 11:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:36 Set A/D data flow result=40 11:03:36 Set A/D channel type result=40 11:03:36 Set A/D encoding result=40 11:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:36 Set channel filter=0.000000e+000 result=40 11:03:36 Config A/D Result=40 11:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:36 Get A/D filter: -9.255963e+061 result=40 11:03:36 Get A/D value=-858993460 result=40 11:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:03:36 Parameters OK 11:03:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:03:36 Set A/D data flow result=40 11:03:36 Set A/D channel type result=40 11:03:36 Set A/D encoding result=40 11:03:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:03:36 Set channel filter=0.000000e+000 result=40 11:03:36 Config A/D Result=40 11:03:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:03:36 Get A/D filter: -9.255963e+061 result=40 11:03:36 Get A/D value=-858993460 result=40 11:03:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:03:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:03:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:03:36 Aux= 11:03:36 Message to Camera, serial 8549 queued 11:04:06 Received message from Master: op=PointingHead serial=8556 11:04:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:04:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:04:07 Point started: ret=0 11:04:07 point_skyscan result=0 11:04:08 Check angles 11:04:08 SkyScan query 11:04:08 SkyScan query done: ret=0 az=135.18<-9012 ze=36.87<-9542 Statuses=0009 0009 11:04:08 Msec=0 True Az=135.18 Ze=36.87 Az status=0009 Ze status=0009 11:04:08 Check angles 11:04:08 SkyScan query 11:04:09 SkyScan query done: ret=0 az=117.255<-7817 ze=15.495<-10967 Statuses=0009 0009 11:04:09 Msec=750 True Az=117.255 Ze=15.495 Az status=0009 Ze status=0009 11:04:09 Check angles 11:04:09 SkyScan query 11:04:10 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.475<-12365 Statuses=0009 0009 11:04:10 Msec=1500 True Az=99.915 Ze=-5.475 Az status=0009 Ze status=0009 11:04:10 Check angles 11:04:10 SkyScan query 11:04:10 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.43<-13762 Statuses=0009 0009 11:04:10 Msec=2250 True Az=82.41 Ze=-26.43 Az status=0009 Ze status=0009 11:04:11 Check angles 11:04:11 SkyScan query 11:04:11 SkyScan query done: ret=0 az=64.575<-4305 ze=-38.565<-14571 Statuses=0009 0008 11:04:11 Msec=3000 True Az=64.575 Ze=-38.565 Az status=0009 Ze status=0008 11:04:11 Check angles 11:04:11 SkyScan query 11:04:12 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 11:04:12 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 11:04:12 Check angles 11:04:12 SkyScan query 11:04:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:04:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:04:13 Message to Master queued w/err=0: serial=8556 error=0 11:04:18 Received message from Master: op=Filter serial=8557 11:04:18 Color wheel filter change from 0 to 0 11:04:18 FLIGetFilterPos err=0 currentPosition=0 11:04:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:04:18 Filter is already there-color wheel unchanged 11:04:18 Received message from Master: op=Shutter serial=8558 11:04:18 Shutter LASER close 11:04:18 Received message from Camera: op=State serial=8560 11:04:18 GetSingleValue result=40 Value=cccccccc 11:04:18 SkyScan query 11:04:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:18 Parameters OK 11:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:18 Set A/D data flow result=40 11:04:18 Set A/D channel type result=40 11:04:18 Set A/D encoding result=40 11:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:18 Set channel filter=0.000000e+000 result=40 11:04:18 Config A/D Result=40 11:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:18 Get A/D filter: -9.255963e+061 result=40 11:04:18 Get A/D value=-858993460 result=40 11:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:04:18 Parameters OK 11:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:04:18 Set A/D data flow result=40 11:04:18 Set A/D channel type result=40 11:04:18 Set A/D encoding result=40 11:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:04:18 Set channel filter=0.000000e+000 result=40 11:04:18 Config A/D Result=40 11:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:04:18 Get A/D filter: -9.255963e+061 result=40 11:04:18 Get A/D value=-858993460 result=40 11:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:04:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:04:18 Aux= 11:04:18 Message to Camera, serial 8560 queued 11:04:49 Received message from Master: op=PointingHead serial=8567 11:04:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:04:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:04:50 Point started: ret=0 11:04:50 point_skyscan result=0 11:04:50 Check angles 11:04:50 SkyScan query 11:04:51 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.805<-16587 Statuses=0009 0009 11:04:51 Msec=0 True Az=64.23 Ze=-68.805 Az status=0009 Ze status=0009 11:04:51 Check angles 11:04:51 SkyScan query 11:04:52 SkyScan query done: ret=0 az=82.38<-5492 ze=-90.18<-18012 Statuses=0009 0009 11:04:52 Msec=750 True Az=82.38 Ze=-90.18 Az status=0009 Ze status=0009 11:04:52 Check angles 11:04:52 SkyScan query 11:04:53 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.135<-19409 Statuses=0009 0009 11:04:53 Msec=1500 True Az=99.735 Ze=-111.135 Az status=0009 Ze status=0009 11:04:53 Check angles 11:04:53 SkyScan query 11:04:53 SkyScan query done: ret=0 az=117.21<-7814 ze=-132.105<-20807 Statuses=0009 0009 11:04:53 Msec=2250 True Az=117.21 Ze=-132.105 Az status=0009 Ze status=0009 11:04:53 Check angles 11:04:53 SkyScan query 11:04:54 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 11:04:54 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 11:04:54 Check angles 11:04:54 SkyScan query 11:04:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:04:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:04:55 Message to Master queued w/err=0: serial=8567 error=0 11:05:00 Received message from Master: op=Filter serial=8568 11:05:00 Color wheel filter change from 0 to 0 11:05:00 FLIGetFilterPos err=0 currentPosition=0 11:05:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:00 Filter is already there-color wheel unchanged 11:05:00 Received message from Master: op=Shutter serial=8569 11:05:00 Shutter LASER close 11:05:00 Received message from Camera: op=State serial=8571 11:05:00 GetSingleValue result=40 Value=cccccccc 11:05:00 SkyScan query 11:05:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:05:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:01 Parameters OK 11:05:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:01 Set A/D data flow result=40 11:05:01 Set A/D channel type result=40 11:05:01 Set A/D encoding result=40 11:05:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:01 Set channel filter=0.000000e+000 result=40 11:05:01 Config A/D Result=40 11:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:01 Get A/D filter: -9.255963e+061 result=40 11:05:01 Get A/D value=-858993460 result=40 11:05:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:01 Parameters OK 11:05:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:01 Set A/D data flow result=40 11:05:01 Set A/D channel type result=40 11:05:01 Set A/D encoding result=40 11:05:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:01 Set channel filter=0.000000e+000 result=40 11:05:01 Config A/D Result=40 11:05:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:01 Get A/D filter: -9.255963e+061 result=40 11:05:01 Get A/D value=-858993460 result=40 11:05:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:01 Aux= 11:05:01 Message to Camera, serial 8571 queued 11:05:31 Received message from Master: op=PointingHead serial=8578 11:05:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:05:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:05:32 Point started: ret=0 11:05:32 point_skyscan result=0 11:05:33 Check angles 11:05:33 SkyScan query 11:05:33 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.12<-23408 Statuses=0009 0009 11:05:33 Msec=0 True Az=113.025 Ze=-171.12 Az status=0009 Ze status=0009 11:05:33 Check angles 11:05:33 SkyScan query 11:05:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:05:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:05:34 Message to Master queued w/err=0: serial=8578 error=0 11:05:39 Received message from Master: op=Filter serial=8579 11:05:39 Color wheel filter change from 0 to 0 11:05:39 FLIGetFilterPos err=0 currentPosition=0 11:05:39 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:39 Filter is already there-color wheel unchanged 11:05:39 Received message from Master: op=Shutter serial=8580 11:05:39 Shutter LASER open 11:05:39 Received message from Camera: op=State serial=8582 11:05:39 GetSingleValue result=40 Value=cccccccc 11:05:39 SkyScan query 11:05:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:05:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:40 Parameters OK 11:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:40 Set A/D data flow result=40 11:05:40 Set A/D channel type result=40 11:05:40 Set A/D encoding result=40 11:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:40 Set channel filter=0.000000e+000 result=40 11:05:40 Config A/D Result=40 11:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:40 Get A/D filter: -9.255963e+061 result=40 11:05:40 Get A/D value=-858993460 result=40 11:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:40 Parameters OK 11:05:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:40 Set A/D data flow result=40 11:05:40 Set A/D channel type result=40 11:05:40 Set A/D encoding result=40 11:05:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:40 Set channel filter=0.000000e+000 result=40 11:05:40 Config A/D Result=40 11:05:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:40 Get A/D filter: -9.255963e+061 result=40 11:05:40 Get A/D value=-858993460 result=40 11:05:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:40 Aux= 11:05:40 Message to Camera, serial 8582 queued 11:05:42 Received message from Master: op=Shutter serial=8586 11:05:42 Shutter LASER close 11:05:43 Received message from Master: op=PointingHead serial=8590 11:05:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:05:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:05:43 Point started: ret=0 11:05:43 point_skyscan result=0 11:05:44 Check angles 11:05:44 SkyScan query 11:05:44 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.505<-21567 Statuses=0009 0009 11:05:44 Msec=0 True Az=135.75 Ze=-143.505 Az status=0009 Ze status=0009 11:05:45 Check angles 11:05:45 SkyScan query 11:05:45 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.565<-20171 Statuses=0009 0009 11:05:45 Msec=750 True Az=153.18 Ze=-122.565 Az status=0009 Ze status=0009 11:05:45 Check angles 11:05:45 SkyScan query 11:05:46 SkyScan query done: ret=0 az=170.595<-11373 ze=-101.61<-18774 Statuses=0009 0009 11:05:46 Msec=1500 True Az=170.595 Ze=-101.61 Az status=0009 Ze status=0009 11:05:46 Check angles 11:05:46 SkyScan query 11:05:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.67<-17378 Statuses=0008 0009 11:05:47 Msec=2250 True Az=176.025 Ze=-80.67 Az status=0008 Ze status=0009 11:05:47 Check angles 11:05:47 SkyScan query 11:05:47 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.28<-15952 Statuses=0008 0009 11:05:47 Msec=3000 True Az=176.01 Ze=-59.28 Az status=0008 Ze status=0009 11:05:48 Check angles 11:05:48 SkyScan query 11:05:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:05:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:05:48 Message to Master queued w/err=0: serial=8590 error=0 11:05:53 Received message from Master: op=Filter serial=8591 11:05:53 Color wheel filter change from 0 to 0 11:05:53 FLIGetFilterPos err=0 currentPosition=0 11:05:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:05:53 Filter is already there-color wheel unchanged 11:05:53 Received message from Master: op=Shutter serial=8592 11:05:53 Shutter LASER close 11:05:54 Received message from Camera: op=State serial=8594 11:05:54 GetSingleValue result=40 Value=cccccccc 11:05:54 SkyScan query 11:05:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:05:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:54 Parameters OK 11:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:54 Set A/D data flow result=40 11:05:54 Set A/D channel type result=40 11:05:54 Set A/D encoding result=40 11:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:54 Set channel filter=0.000000e+000 result=40 11:05:54 Config A/D Result=40 11:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:54 Get A/D filter: -9.255963e+061 result=40 11:05:54 Get A/D value=-858993460 result=40 11:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:05:54 Parameters OK 11:05:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:05:54 Set A/D data flow result=40 11:05:54 Set A/D channel type result=40 11:05:54 Set A/D encoding result=40 11:05:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:05:54 Set channel filter=0.000000e+000 result=40 11:05:54 Config A/D Result=40 11:05:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:05:54 Get A/D filter: -9.255963e+061 result=40 11:05:54 Get A/D value=-858993460 result=40 11:05:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:05:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:05:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:05:54 Aux= 11:05:54 Message to Camera, serial 8594 queued 11:06:25 Received message from Master: op=PointingHead serial=8601 11:06:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:06:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:06:25 Point started: ret=0 11:06:25 point_skyscan result=0 11:06:26 Check angles 11:06:26 SkyScan query 11:06:27 SkyScan query done: ret=0 az=152.625<-10175 ze=-21.435<-13429 Statuses=0009 0009 11:06:27 Msec=0 True Az=152.625 Ze=-21.435 Az status=0009 Ze status=0009 11:06:27 Check angles 11:06:27 SkyScan query 11:06:27 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.45<-12030 Statuses=0009 0009 11:06:27 Msec=750 True Az=135.195 Ze=-0.45 Az status=0009 Ze status=0009 11:06:28 Check angles 11:06:28 SkyScan query 11:06:28 SkyScan query done: ret=0 az=117.585<-7839 ze=20.49<-10634 Statuses=0009 0009 11:06:28 Msec=1500 True Az=117.585 Ze=20.49 Az status=0009 Ze status=0009 11:06:28 Check angles 11:06:28 SkyScan query 11:06:29 SkyScan query done: ret=0 az=100.245<-6683 ze=41.475<-9235 Statuses=0009 0009 11:06:29 Msec=2250 True Az=100.245 Ze=41.475 Az status=0009 Ze status=0009 11:06:29 Check angles 11:06:29 SkyScan query 11:06:30 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:06:30 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:06:30 Check angles 11:06:30 SkyScan query 11:06:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:06:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:06:30 Message to Master queued w/err=0: serial=8601 error=0 11:06:35 Received message from Master: op=Filter serial=8602 11:06:35 Color wheel filter change from 0 to 0 11:06:35 FLIGetFilterPos err=0 currentPosition=0 11:06:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:06:35 Filter is already there-color wheel unchanged 11:06:36 Received message from Master: op=Shutter serial=8603 11:06:36 Shutter LASER close 11:06:36 Received message from Camera: op=State serial=8605 11:06:36 GetSingleValue result=40 Value=cccccccc 11:06:36 SkyScan query 11:06:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:06:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:36 Parameters OK 11:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:36 Set A/D data flow result=40 11:06:36 Set A/D channel type result=40 11:06:36 Set A/D encoding result=40 11:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:36 Set channel filter=0.000000e+000 result=40 11:06:36 Config A/D Result=40 11:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:36 Get A/D filter: -9.255963e+061 result=40 11:06:36 Get A/D value=-858993460 result=40 11:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:06:36 Parameters OK 11:06:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:06:36 Set A/D data flow result=40 11:06:36 Set A/D channel type result=40 11:06:36 Set A/D encoding result=40 11:06:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:06:36 Set channel filter=0.000000e+000 result=40 11:06:36 Config A/D Result=40 11:06:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:06:36 Get A/D filter: -9.255963e+061 result=40 11:06:36 Get A/D value=-858993460 result=40 11:06:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:06:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:06:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:06:36 Aux= 11:06:36 Message to Camera, serial 8605 queued 11:07:07 Received message from Master: op=PointingHead serial=8612 11:07:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:07:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:07:08 Point started: ret=0 11:07:08 point_skyscan result=0 11:07:08 Check angles 11:07:08 SkyScan query 11:07:09 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 11:07:09 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 11:07:09 Check angles 11:07:09 SkyScan query 11:07:10 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 11:07:10 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 11:07:10 Check angles 11:07:10 SkyScan query 11:07:10 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 11:07:10 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 11:07:11 Check angles 11:07:11 SkyScan query 11:07:11 SkyScan query done: ret=0 az=161.745<-10783 ze=38.505<-9433 Statuses=0009 0008 11:07:11 Msec=2250 True Az=161.745 Ze=38.505 Az status=0009 Ze status=0008 11:07:11 Check angles 11:07:11 SkyScan query 11:07:12 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:07:12 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:07:12 Check angles 11:07:12 SkyScan query 11:07:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:07:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:07:13 Message to Master queued w/err=0: serial=8612 error=0 11:07:18 Received message from Master: op=Filter serial=8613 11:07:18 Color wheel filter change from 0 to 0 11:07:18 FLIGetFilterPos err=0 currentPosition=0 11:07:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:07:18 Filter is already there-color wheel unchanged 11:07:18 Received message from Master: op=Shutter serial=8614 11:07:18 Shutter LASER close 11:07:18 Received message from Camera: op=State serial=8616 11:07:18 GetSingleValue result=40 Value=cccccccc 11:07:18 SkyScan query 11:07:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:07:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:18 Parameters OK 11:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:18 Set A/D data flow result=40 11:07:18 Set A/D channel type result=40 11:07:18 Set A/D encoding result=40 11:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:18 Set channel filter=0.000000e+000 result=40 11:07:18 Config A/D Result=40 11:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:18 Get A/D filter: -9.255963e+061 result=40 11:07:18 Get A/D value=-858993460 result=40 11:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:07:18 Parameters OK 11:07:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:07:18 Set A/D data flow result=40 11:07:18 Set A/D channel type result=40 11:07:18 Set A/D encoding result=40 11:07:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:07:18 Set channel filter=0.000000e+000 result=40 11:07:18 Config A/D Result=40 11:07:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:07:18 Get A/D filter: -9.255963e+061 result=40 11:07:18 Get A/D value=-858993460 result=40 11:07:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:07:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:07:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:07:18 Aux= 11:07:18 Message to Camera, serial 8616 queued 11:07:49 Received message from Master: op=PointingHead serial=8623 11:07:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:07:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:07:50 Point started: ret=0 11:07:50 point_skyscan result=0 11:07:50 Check angles 11:07:50 SkyScan query 11:07:51 SkyScan query done: ret=0 az=152.97<-10198 ze=8.76<-11416 Statuses=0009 0009 11:07:51 Msec=0 True Az=152.97 Ze=8.76 Az status=0009 Ze status=0009 11:07:51 Check angles 11:07:51 SkyScan query 11:07:52 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.18<-12812 Statuses=0009 0009 11:07:52 Msec=750 True Az=135.6 Ze=-12.18 Az status=0009 Ze status=0009 11:07:52 Check angles 11:07:52 SkyScan query 11:07:52 SkyScan query done: ret=0 az=118.05<-7870 ze=-33.12<-14208 Statuses=0009 0009 11:07:52 Msec=1500 True Az=118.05 Ze=-33.12 Az status=0009 Ze status=0009 11:07:53 Check angles 11:07:53 SkyScan query 11:07:53 SkyScan query done: ret=0 az=100.71<-6714 ze=-51.51<-15434 Statuses=0009 0009 11:07:53 Msec=2250 True Az=100.71 Ze=-51.51 Az status=0009 Ze status=0009 11:07:53 Check angles 11:07:53 SkyScan query 11:07:54 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:07:54 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:07:54 Check angles 11:07:54 SkyScan query 11:07:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:07:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:07:55 Message to Master queued w/err=0: serial=8623 error=0 11:08:00 Received message from Master: op=Filter serial=8624 11:08:00 Color wheel filter change from 0 to 0 11:08:00 FLIGetFilterPos err=0 currentPosition=0 11:08:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:00 Filter is already there-color wheel unchanged 11:08:00 Received message from Master: op=Shutter serial=8625 11:08:00 Shutter LASER close 11:08:00 Received message from Camera: op=State serial=8627 11:08:00 GetSingleValue result=40 Value=cccccccc 11:08:00 SkyScan query 11:08:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:08:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:00 Parameters OK 11:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:00 Set A/D data flow result=40 11:08:00 Set A/D channel type result=40 11:08:00 Set A/D encoding result=40 11:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:00 Set channel filter=0.000000e+000 result=40 11:08:00 Config A/D Result=40 11:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:00 Get A/D filter: -9.255963e+061 result=40 11:08:00 Get A/D value=-858993460 result=40 11:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:00 Parameters OK 11:08:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:00 Set A/D data flow result=40 11:08:00 Set A/D channel type result=40 11:08:00 Set A/D encoding result=40 11:08:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:00 Set channel filter=0.000000e+000 result=40 11:08:00 Config A/D Result=40 11:08:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:00 Get A/D filter: -9.255963e+061 result=40 11:08:00 Get A/D value=-858993460 result=40 11:08:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:00 Aux= 11:08:00 Message to Camera, serial 8627 queued 11:08:31 Received message from Master: op=PointingHead serial=8634 11:08:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:08:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:08:32 Point started: ret=0 11:08:32 point_skyscan result=0 11:08:32 Check angles 11:08:32 SkyScan query 11:08:33 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.105<-17407 Statuses=0009 0009 11:08:33 Msec=0 True Az=108.855 Ze=-81.105 Az status=0009 Ze status=0009 11:08:33 Check angles 11:08:33 SkyScan query 11:08:34 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.045<-18803 Statuses=0008 0009 11:08:34 Msec=750 True Az=113.01 Ze=-102.045 Az status=0008 Ze status=0009 11:08:34 Check angles 11:08:34 SkyScan query 11:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 11:08:35 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 11:08:35 Check angles 11:08:35 SkyScan query 11:08:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 11:08:35 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 11:08:35 Check angles 11:08:35 SkyScan query 11:08:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.36<-23024 Statuses=0008 0009 11:08:36 Msec=3000 True Az=112.995 Ze=-165.36 Az status=0008 Ze status=0009 11:08:36 Check angles 11:08:36 SkyScan query 11:08:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:08:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:08:37 Message to Master queued w/err=0: serial=8634 error=0 11:08:42 Received message from Master: op=Filter serial=8635 11:08:42 Color wheel filter change from 0 to 0 11:08:42 FLIGetFilterPos err=0 currentPosition=0 11:08:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:42 Filter is already there-color wheel unchanged 11:08:42 Received message from Master: op=Shutter serial=8636 11:08:42 Shutter LASER open 11:08:42 Received message from Camera: op=State serial=8638 11:08:42 GetSingleValue result=40 Value=cccccccc 11:08:42 SkyScan query 11:08:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:08:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:43 Parameters OK 11:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:43 Set A/D data flow result=40 11:08:43 Set A/D channel type result=40 11:08:43 Set A/D encoding result=40 11:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:43 Set channel filter=0.000000e+000 result=40 11:08:43 Config A/D Result=40 11:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:43 Get A/D filter: -9.255963e+061 result=40 11:08:43 Get A/D value=-858993460 result=40 11:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:43 Parameters OK 11:08:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:43 Set A/D data flow result=40 11:08:43 Set A/D channel type result=40 11:08:43 Set A/D encoding result=40 11:08:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:43 Set channel filter=0.000000e+000 result=40 11:08:43 Config A/D Result=40 11:08:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:43 Get A/D filter: -9.255963e+061 result=40 11:08:43 Get A/D value=-858993460 result=40 11:08:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:43 Aux= 11:08:43 Message to Camera, serial 8638 queued 11:08:45 Received message from Master: op=Shutter serial=8642 11:08:45 Shutter LASER close 11:08:46 Received message from Master: op=PointingHead serial=8646 11:08:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:08:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:08:46 Point started: ret=0 11:08:46 point_skyscan result=0 11:08:47 Check angles 11:08:47 SkyScan query 11:08:47 SkyScan query done: ret=0 az=89.7<-5980 ze=157.095<-1527 Statuses=0009 0009 11:08:47 Msec=0 True Az=89.7 Ze=157.095 Az status=0009 Ze status=0009 11:08:47 Check angles 11:08:47 SkyScan query 11:08:48 SkyScan query done: ret=0 az=72.375<-4825 ze=136.14<-2924 Statuses=0009 0009 11:08:48 Msec=750 True Az=72.375 Ze=136.14 Az status=0009 Ze status=0009 11:08:48 Check angles 11:08:48 SkyScan query 11:08:49 SkyScan query done: ret=0 az=54.9<-3660 ze=115.185<-4321 Statuses=0009 0009 11:08:49 Msec=1500 True Az=54.9 Ze=115.185 Az status=0009 Ze status=0009 11:08:49 Check angles 11:08:49 SkyScan query 11:08:50 SkyScan query done: ret=0 az=40.875<-2725 ze=94.215<-5719 Statuses=0009 0009 11:08:50 Msec=2250 True Az=40.875 Ze=94.215 Az status=0009 Ze status=0009 11:08:50 Check angles 11:08:50 SkyScan query 11:08:50 SkyScan query done: ret=0 az=41.01<-2734 ze=73.26<-7116 Statuses=0008 0009 11:08:50 Msec=3000 True Az=41.01 Ze=73.26 Az status=0008 Ze status=0009 11:08:50 Check angles 11:08:50 SkyScan query 11:08:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 11:08:51 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 11:08:51 Check angles 11:08:51 SkyScan query 11:08:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:08:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:08:52 Message to Master queued w/err=0: serial=8646 error=0 11:08:57 Received message from Master: op=Filter serial=8647 11:08:57 Color wheel filter change from 0 to 0 11:08:57 FLIGetFilterPos err=0 currentPosition=0 11:08:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:08:57 Filter is already there-color wheel unchanged 11:08:57 Received message from Master: op=Shutter serial=8648 11:08:57 Shutter LASER close 11:08:57 Received message from Camera: op=State serial=8650 11:08:57 GetSingleValue result=40 Value=cccccccc 11:08:57 SkyScan query 11:08:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:08:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:58 Parameters OK 11:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:58 Set A/D data flow result=40 11:08:58 Set A/D channel type result=40 11:08:58 Set A/D encoding result=40 11:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:58 Set channel filter=0.000000e+000 result=40 11:08:58 Config A/D Result=40 11:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:58 Get A/D filter: -9.255963e+061 result=40 11:08:58 Get A/D value=-858993460 result=40 11:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:08:58 Parameters OK 11:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:08:58 Set A/D data flow result=40 11:08:58 Set A/D channel type result=40 11:08:58 Set A/D encoding result=40 11:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:08:58 Set channel filter=0.000000e+000 result=40 11:08:58 Config A/D Result=40 11:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:08:58 Get A/D filter: -9.255963e+061 result=40 11:08:58 Get A/D value=-858993460 result=40 11:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:08:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:08:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:08:58 Aux= 11:08:58 Message to Camera, serial 8650 queued 11:09:29 Received message from Master: op=PointingHead serial=8657 11:09:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:09:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:09:29 Point started: ret=0 11:09:29 point_skyscan result=0 11:09:30 Check angles 11:09:30 SkyScan query 11:09:30 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 11:09:30 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 11:09:30 Check angles 11:09:30 SkyScan query 11:09:31 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 11:09:31 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 11:09:31 Check angles 11:09:31 SkyScan query 11:09:32 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 11:09:32 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 11:09:32 Check angles [UTC 2018-12-4 11:09:32] 11:09:32 SkyScan query 11:09:33 SkyScan query done: ret=0 az=118.155<-7877 ze=66.495<-7567 Statuses=0009 0008 11:09:33 Msec=2250 True Az=118.155 Ze=66.495 Az status=0009 Ze status=0008 11:09:33 Check angles 11:09:33 SkyScan query 11:09:33 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 11:09:33 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 11:09:33 Check angles 11:09:33 SkyScan query 11:09:34 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 11:09:34 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 11:09:34 Check angles 11:09:34 SkyScan query 11:09:35 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:09:35 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:09:35 Message to Master queued w/err=0: serial=8657 error=0 11:09:40 Received message from Master: op=Filter serial=8658 11:09:40 Color wheel filter change from 0 to 0 11:09:40 FLIGetFilterPos err=0 currentPosition=0 11:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:09:40 Filter is already there-color wheel unchanged 11:09:40 Received message from Master: op=Shutter serial=8659 11:09:40 Shutter LASER close 11:09:40 Received message from Camera: op=State serial=8661 11:09:40 GetSingleValue result=40 Value=cccccccc 11:09:40 SkyScan query 11:09:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:09:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:41 Parameters OK 11:09:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:41 Set A/D data flow result=40 11:09:41 Set A/D channel type result=40 11:09:41 Set A/D encoding result=40 11:09:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:41 Set channel filter=0.000000e+000 result=40 11:09:41 Config A/D Result=40 11:09:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:41 Get A/D filter: -9.255963e+061 result=40 11:09:41 Get A/D value=-858993460 result=40 11:09:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:09:41 Parameters OK 11:09:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:09:41 Set A/D data flow result=40 11:09:41 Set A/D channel type result=40 11:09:41 Set A/D encoding result=40 11:09:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:09:41 Set channel filter=0.000000e+000 result=40 11:09:41 Config A/D Result=40 11:09:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:09:41 Get A/D filter: -9.255963e+061 result=40 11:09:41 Get A/D value=-858993460 result=40 11:09:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:09:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:09:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:09:41 Aux= 11:09:41 Message to Camera, serial 8661 queued 11:10:11 Received message from Master: op=PointingHead serial=8668 11:10:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:10:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:10:12 Point started: ret=0 11:10:12 point_skyscan result=0 11:10:12 Check angles 11:10:12 SkyScan query 11:10:13 SkyScan query done: ret=0 az=135.03<-9002 ze=36.72<-9552 Statuses=0009 0009 11:10:13 Msec=0 True Az=135.03 Ze=36.72 Az status=0009 Ze status=0009 11:10:13 Check angles 11:10:13 SkyScan query 11:10:14 SkyScan query done: ret=0 az=117.525<-7835 ze=15.75<-10950 Statuses=0009 0009 11:10:14 Msec=750 True Az=117.525 Ze=15.75 Az status=0009 Ze status=0009 11:10:14 Check angles 11:10:14 SkyScan query 11:10:15 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.22<-12348 Statuses=0009 0009 11:10:15 Msec=1500 True Az=100.2 Ze=-5.22 Az status=0009 Ze status=0009 11:10:15 Check angles 11:10:15 SkyScan query 11:10:15 SkyScan query done: ret=0 az=82.665<-5511 ze=-26.19<-13746 Statuses=0009 0009 11:10:15 Msec=2250 True Az=82.665 Ze=-26.19 Az status=0009 Ze status=0009 11:10:15 Check angles 11:10:15 SkyScan query 11:10:16 SkyScan query done: ret=0 az=65.235<-4349 ze=-38.565<-14571 Statuses=0009 0008 11:10:16 Msec=3000 True Az=65.235 Ze=-38.565 Az status=0009 Ze status=0008 11:10:16 Check angles 11:10:16 SkyScan query 11:10:17 SkyScan query done: ret=0 az=47.625<-3175 ze=-38.52<-14568 Statuses=0009 0008 11:10:17 Msec=3750 True Az=47.625 Ze=-38.52 Az status=0009 Ze status=0008 11:10:17 Check angles 11:10:17 SkyScan query 11:10:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:10:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:10:18 Message to Master queued w/err=0: serial=8668 error=0 11:10:23 Received message from Master: op=Filter serial=8669 11:10:23 Color wheel filter change from 0 to 0 11:10:23 FLIGetFilterPos err=0 currentPosition=0 11:10:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:10:23 Filter is already there-color wheel unchanged 11:10:23 Received message from Master: op=Shutter serial=8670 11:10:23 Shutter LASER close 11:10:23 Received message from Camera: op=State serial=8672 11:10:23 GetSingleValue result=40 Value=cccccccc 11:10:23 SkyScan query 11:10:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:10:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:23 Parameters OK 11:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:23 Set A/D data flow result=40 11:10:23 Set A/D channel type result=40 11:10:23 Set A/D encoding result=40 11:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:23 Set channel filter=0.000000e+000 result=40 11:10:23 Config A/D Result=40 11:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:23 Get A/D filter: -9.255963e+061 result=40 11:10:23 Get A/D value=-858993460 result=40 11:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:10:23 Parameters OK 11:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:10:23 Set A/D data flow result=40 11:10:23 Set A/D channel type result=40 11:10:23 Set A/D encoding result=40 11:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:10:23 Set channel filter=0.000000e+000 result=40 11:10:23 Config A/D Result=40 11:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:10:23 Get A/D filter: -9.255963e+061 result=40 11:10:23 Get A/D value=-858993460 result=40 11:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:10:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:10:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:10:23 Aux= 11:10:23 Message to Camera, serial 8672 queued 11:10:54 Received message from Master: op=PointingHead serial=8679 11:10:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:10:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:10:55 Point started: ret=0 11:10:55 point_skyscan result=0 11:10:55 Check angles 11:10:55 SkyScan query 11:10:56 SkyScan query done: ret=0 az=63.705<-4247 ze=-68.055<-16537 Statuses=0009 0009 11:10:56 Msec=0 True Az=63.705 Ze=-68.055 Az status=0009 Ze status=0009 11:10:56 Check angles 11:10:56 SkyScan query 11:10:57 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.025<-17935 Statuses=0009 0009 11:10:57 Msec=750 True Az=81.405 Ze=-89.025 Az status=0009 Ze status=0009 11:10:57 Check angles 11:10:57 SkyScan query 11:10:57 SkyScan query done: ret=0 az=99.045<-6603 ze=-110.4<-19360 Statuses=0009 0009 11:10:57 Msec=1500 True Az=99.045 Ze=-110.4 Az status=0009 Ze status=0009 11:10:58 Check angles 11:10:58 SkyScan query 11:10:58 SkyScan query done: ret=0 az=116.445<-7763 ze=-131.355<-20757 Statuses=0009 0009 11:10:58 Msec=2250 True Az=116.445 Ze=-131.355 Az status=0009 Ze status=0009 11:10:58 Check angles 11:10:58 SkyScan query 11:10:59 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0009 0008 11:10:59 Msec=3000 True Az=130.995 Ze=-141.525 Az status=0009 Ze status=0008 11:10:59 Check angles 11:10:59 SkyScan query 11:11:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:11:00 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:11:00 Message to Master queued w/err=0: serial=8679 error=0 11:11:05 Received message from Master: op=Filter serial=8680 11:11:05 Color wheel filter change from 0 to 0 11:11:05 FLIGetFilterPos err=0 currentPosition=0 11:11:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:05 Filter is already there-color wheel unchanged 11:11:05 Received message from Master: op=Shutter serial=8681 11:11:05 Shutter LASER close 11:11:05 Received message from Camera: op=State serial=8683 11:11:05 GetSingleValue result=40 Value=cccccccc 11:11:05 SkyScan query 11:11:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:11:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:05 Parameters OK 11:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:05 Set A/D data flow result=40 11:11:05 Set A/D channel type result=40 11:11:05 Set A/D encoding result=40 11:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:05 Set channel filter=0.000000e+000 result=40 11:11:05 Config A/D Result=40 11:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:05 Get A/D filter: -9.255963e+061 result=40 11:11:05 Get A/D value=-858993460 result=40 11:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:05 Parameters OK 11:11:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:05 Set A/D data flow result=40 11:11:05 Set A/D channel type result=40 11:11:05 Set A/D encoding result=40 11:11:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:05 Set channel filter=0.000000e+000 result=40 11:11:05 Config A/D Result=40 11:11:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:05 Get A/D filter: -9.255963e+061 result=40 11:11:05 Get A/D value=-858993460 result=40 11:11:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:05 Aux= 11:11:05 Message to Camera, serial 8683 queued 11:11:36 Received message from Master: op=PointingHead serial=8690 11:11:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:11:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:11:37 Point started: ret=0 11:11:37 point_skyscan result=0 11:11:37 Check angles 11:11:37 SkyScan query 11:11:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.495<-23433 Statuses=0008 0009 11:11:38 Msec=0 True Az=113.01 Ze=-171.495 Az status=0008 Ze status=0009 11:11:38 Check angles 11:11:38 SkyScan query 11:11:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:11:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:11:39 Message to Master queued w/err=0: serial=8690 error=0 11:11:44 Received message from Master: op=Filter serial=8691 11:11:44 Color wheel filter change from 0 to 0 11:11:44 FLIGetFilterPos err=0 currentPosition=0 11:11:44 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:44 Filter is already there-color wheel unchanged 11:11:44 Received message from Master: op=Shutter serial=8692 11:11:44 Shutter LASER open 11:11:44 Received message from Camera: op=State serial=8694 11:11:44 GetSingleValue result=40 Value=cccccccc 11:11:44 SkyScan query 11:11:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:11:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:45 Parameters OK 11:11:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:45 Set A/D data flow result=40 11:11:45 Set A/D channel type result=40 11:11:45 Set A/D encoding result=40 11:11:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:45 Set channel filter=0.000000e+000 result=40 11:11:45 Config A/D Result=40 11:11:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:45 Get A/D filter: -9.255963e+061 result=40 11:11:45 Get A/D value=-858993460 result=40 11:11:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:45 Parameters OK 11:11:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:45 Set A/D data flow result=40 11:11:45 Set A/D channel type result=40 11:11:45 Set A/D encoding result=40 11:11:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:45 Set channel filter=0.000000e+000 result=40 11:11:45 Config A/D Result=40 11:11:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:45 Get A/D filter: -9.255963e+061 result=40 11:11:45 Get A/D value=-858993460 result=40 11:11:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:45 Aux= 11:11:45 Message to Camera, serial 8694 queued 11:11:47 Received message from Master: op=Shutter serial=8698 11:11:47 Shutter LASER close 11:11:48 Received message from Master: op=PointingHead serial=8702 11:11:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:11:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:11:48 Point started: ret=0 11:11:48 point_skyscan result=0 11:11:49 Check angles 11:11:49 SkyScan query 11:11:49 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.205<-21547 Statuses=0009 0009 11:11:49 Msec=0 True Az=135.93 Ze=-143.205 Az status=0009 Ze status=0009 11:11:50 Check angles 11:11:50 SkyScan query 11:11:50 SkyScan query done: ret=0 az=153.885<-10259 ze=-121.8<-20120 Statuses=0009 0009 11:11:50 Msec=750 True Az=153.885 Ze=-121.8 Az status=0009 Ze status=0009 11:11:50 Check angles 11:11:50 SkyScan query 11:11:51 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.425<-18695 Statuses=0009 0009 11:11:51 Msec=1500 True Az=171.705 Ze=-100.425 Az status=0009 Ze status=0009 11:11:51 Check angles 11:11:51 SkyScan query 11:11:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.455<-17297 Statuses=0008 0009 11:11:52 Msec=2250 True Az=176.025 Ze=-79.455 Az status=0008 Ze status=0009 11:11:52 Check angles 11:11:52 SkyScan query 11:11:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.5<-15900 Statuses=0008 0009 11:11:52 Msec=3000 True Az=175.995 Ze=-58.5 Az status=0008 Ze status=0009 11:11:53 Check angles 11:11:53 SkyScan query 11:11:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:11:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:11:53 Message to Master queued w/err=0: serial=8702 error=0 11:11:58 Received message from Master: op=Filter serial=8703 11:11:58 Color wheel filter change from 0 to 0 11:11:58 FLIGetFilterPos err=0 currentPosition=0 11:11:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:11:58 Filter is already there-color wheel unchanged 11:11:58 Received message from Master: op=Shutter serial=8704 11:11:58 Shutter LASER close 11:11:59 Received message from Camera: op=State serial=8706 11:11:59 GetSingleValue result=40 Value=cccccccc 11:11:59 SkyScan query 11:11:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:11:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:59 Parameters OK 11:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:59 Set A/D data flow result=40 11:11:59 Set A/D channel type result=40 11:11:59 Set A/D encoding result=40 11:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:59 Set channel filter=0.000000e+000 result=40 11:11:59 Config A/D Result=40 11:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:59 Get A/D filter: -9.255963e+061 result=40 11:11:59 Get A/D value=-858993460 result=40 11:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:11:59 Parameters OK 11:11:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:11:59 Set A/D data flow result=40 11:11:59 Set A/D channel type result=40 11:11:59 Set A/D encoding result=40 11:11:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:11:59 Set channel filter=0.000000e+000 result=40 11:11:59 Config A/D Result=40 11:11:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:11:59 Get A/D filter: -9.255963e+061 result=40 11:11:59 Get A/D value=-858993460 result=40 11:11:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:11:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:11:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:11:59 Aux= 11:11:59 Message to Camera, serial 8706 queued [UTC 2018-12-4 11:12:09] 11:12:30 Received message from Master: op=PointingHead serial=8713 11:12:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:12:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:12:30 Point started: ret=0 11:12:30 point_skyscan result=0 11:12:31 Check angles 11:12:31 SkyScan query 11:12:32 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.57<-13438 Statuses=0009 0009 11:12:32 Msec=0 True Az=152.91 Ze=-21.57 Az status=0009 Ze status=0009 11:12:32 Check angles 11:12:32 SkyScan query 11:12:32 SkyScan query done: ret=0 az=135.03<-9002 ze=-0.18<-12012 Statuses=0009 0009 11:12:32 Msec=750 True Az=135.03 Ze=-0.18 Az status=0009 Ze status=0009 11:12:33 Check angles 11:12:33 SkyScan query 11:12:33 SkyScan query done: ret=0 az=117.54<-7836 ze=20.775<-10615 Statuses=0009 0009 11:12:33 Msec=1500 True Az=117.54 Ze=20.775 Az status=0009 Ze status=0009 11:12:33 Check angles 11:12:33 SkyScan query 11:12:34 SkyScan query done: ret=0 az=100.11<-6674 ze=41.745<-9217 Statuses=0009 0009 11:12:34 Msec=2250 True Az=100.11 Ze=41.745 Az status=0009 Ze status=0009 11:12:34 Check angles 11:12:34 SkyScan query 11:12:35 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:12:35 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:12:35 Check angles 11:12:35 SkyScan query 11:12:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:12:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:12:35 Message to Master queued w/err=0: serial=8713 error=0 11:12:40 Received message from Master: op=Filter serial=8714 11:12:40 Color wheel filter change from 0 to 0 11:12:40 FLIGetFilterPos err=0 currentPosition=0 11:12:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:12:40 Filter is already there-color wheel unchanged 11:12:41 Received message from Master: op=Shutter serial=8715 11:12:41 Shutter LASER close 11:12:41 Received message from Camera: op=State serial=8717 11:12:41 GetSingleValue result=40 Value=cccccccc 11:12:41 SkyScan query 11:12:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:12:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:41 Parameters OK 11:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:41 Set A/D data flow result=40 11:12:41 Set A/D channel type result=40 11:12:41 Set A/D encoding result=40 11:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:41 Set channel filter=0.000000e+000 result=40 11:12:41 Config A/D Result=40 11:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:41 Get A/D filter: -9.255963e+061 result=40 11:12:41 Get A/D value=-858993460 result=40 11:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:12:41 Parameters OK 11:12:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:12:41 Set A/D data flow result=40 11:12:41 Set A/D channel type result=40 11:12:41 Set A/D encoding result=40 11:12:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:12:41 Set channel filter=0.000000e+000 result=40 11:12:41 Config A/D Result=40 11:12:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:12:41 Get A/D filter: -9.255963e+061 result=40 11:12:41 Get A/D value=-858993460 result=40 11:12:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:12:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:12:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:12:41 Aux= 11:12:41 Message to Camera, serial 8717 queued 11:13:12 Received message from Master: op=PointingHead serial=8724 11:13:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:13:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:13:12 Point started: ret=0 11:13:12 point_skyscan result=0 11:13:13 Check angles 11:13:13 SkyScan query 11:13:14 SkyScan query done: ret=0 az=109.08<-7272 ze=38.49<-9434 Statuses=0009 0008 11:13:14 Msec=0 True Az=109.08 Ze=38.49 Az status=0009 Ze status=0008 11:13:14 Check angles 11:13:14 SkyScan query 11:13:15 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 11:13:15 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 11:13:15 Check angles 11:13:15 SkyScan query 11:13:15 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 11:13:15 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 11:13:15 Check angles 11:13:15 SkyScan query 11:13:16 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 11:13:16 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 11:13:16 Check angles 11:13:16 SkyScan query 11:13:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 11:13:17 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 11:13:17 Check angles 11:13:17 SkyScan query 11:13:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:13:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:13:18 Message to Master queued w/err=0: serial=8724 error=0 11:13:23 Received message from Master: op=Filter serial=8725 11:13:23 Color wheel filter change from 0 to 0 11:13:23 FLIGetFilterPos err=0 currentPosition=0 11:13:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:13:23 Filter is already there-color wheel unchanged 11:13:23 Received message from Master: op=Shutter serial=8726 11:13:23 Shutter LASER close 11:13:23 Received message from Camera: op=State serial=8728 11:13:23 GetSingleValue result=40 Value=cccccccc 11:13:23 SkyScan query 11:13:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:13:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:23 Parameters OK 11:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:23 Set A/D data flow result=40 11:13:23 Set A/D channel type result=40 11:13:23 Set A/D encoding result=40 11:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:23 Set channel filter=0.000000e+000 result=40 11:13:23 Config A/D Result=40 11:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:23 Get A/D filter: -9.255963e+061 result=40 11:13:23 Get A/D value=-858993460 result=40 11:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:13:23 Parameters OK 11:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:13:23 Set A/D data flow result=40 11:13:23 Set A/D channel type result=40 11:13:23 Set A/D encoding result=40 11:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:13:23 Set channel filter=0.000000e+000 result=40 11:13:23 Config A/D Result=40 11:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:13:23 Get A/D filter: -9.255963e+061 result=40 11:13:23 Get A/D value=-858993460 result=40 11:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:13:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:13:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:13:23 Aux= 11:13:23 Message to Camera, serial 8728 queued 11:13:54 Received message from Master: op=PointingHead serial=8735 11:13:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:13:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:13:55 Point started: ret=0 11:13:55 point_skyscan result=0 11:13:55 Check angles 11:13:55 SkyScan query 11:13:56 SkyScan query done: ret=0 az=152.97<-10198 ze=8.7<-11420 Statuses=0009 0009 11:13:56 Msec=0 True Az=152.97 Ze=8.7 Az status=0009 Ze status=0009 11:13:56 Check angles 11:13:56 SkyScan query 11:13:57 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.705<-12847 Statuses=0009 0009 11:13:57 Msec=750 True Az=135.18 Ze=-12.705 Az status=0009 Ze status=0009 11:13:57 Check angles 11:13:57 SkyScan query 11:13:57 SkyScan query done: ret=0 az=117.345<-7823 ze=-34.065<-14271 Statuses=0009 0009 11:13:57 Msec=1500 True Az=117.345 Ze=-34.065 Az status=0009 Ze status=0009 11:13:58 Check angles 11:13:58 SkyScan query 11:13:58 SkyScan query done: ret=0 az=99.93<-6662 ze=-51.555<-15437 Statuses=0009 0009 11:13:58 Msec=2250 True Az=99.93 Ze=-51.555 Az status=0009 Ze status=0009 11:13:58 Check angles 11:13:58 SkyScan query 11:13:59 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 11:13:59 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 11:13:59 Check angles 11:13:59 SkyScan query 11:14:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:14:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:14:00 Message to Master queued w/err=0: serial=8735 error=0 11:14:05 Received message from Master: op=Filter serial=8736 11:14:05 Color wheel filter change from 0 to 0 11:14:05 FLIGetFilterPos err=0 currentPosition=0 11:14:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:05 Filter is already there-color wheel unchanged 11:14:05 Received message from Master: op=Shutter serial=8737 11:14:05 Shutter LASER close 11:14:05 Received message from Camera: op=State serial=8739 11:14:05 GetSingleValue result=40 Value=cccccccc 11:14:05 SkyScan query 11:14:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:14:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:05 Parameters OK 11:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:05 Set A/D data flow result=40 11:14:05 Set A/D channel type result=40 11:14:05 Set A/D encoding result=40 11:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:05 Set channel filter=0.000000e+000 result=40 11:14:05 Config A/D Result=40 11:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:05 Get A/D filter: -9.255963e+061 result=40 11:14:05 Get A/D value=-858993460 result=40 11:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:05 Parameters OK 11:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:05 Set A/D data flow result=40 11:14:05 Set A/D channel type result=40 11:14:05 Set A/D encoding result=40 11:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:05 Set channel filter=0.000000e+000 result=40 11:14:05 Config A/D Result=40 11:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:05 Get A/D filter: -9.255963e+061 result=40 11:14:05 Get A/D value=-858993460 result=40 11:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:05 Aux= 11:14:05 Message to Camera, serial 8739 queued 11:14:36 Received message from Master: op=PointingHead serial=8746 11:14:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:14:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:14:37 Point started: ret=0 11:14:37 point_skyscan result=0 11:14:37 Check angles 11:14:37 SkyScan query 11:14:38 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.045<-17403 Statuses=0009 0009 11:14:38 Msec=0 True Az=108.765 Ze=-81.045 Az status=0009 Ze status=0009 11:14:38 Check angles 11:14:38 SkyScan query 11:14:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.435<-18829 Statuses=0008 0009 11:14:39 Msec=750 True Az=113.01 Ze=-102.435 Az status=0008 Ze status=0009 11:14:39 Check angles 11:14:39 SkyScan query 11:14:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.375<-20225 Statuses=0008 0009 11:14:39 Msec=1500 True Az=113.01 Ze=-123.375 Az status=0008 Ze status=0009 11:14:40 Check angles 11:14:40 SkyScan query 11:14:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 11:14:40 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 11:14:40 Check angles 11:14:40 SkyScan query 11:14:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.72<-23048 Statuses=0008 0009 11:14:41 Msec=3000 True Az=112.995 Ze=-165.72 Az status=0008 Ze status=0009 11:14:41 Check angles 11:14:41 SkyScan query 11:14:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:14:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:14:42 Message to Master queued w/err=0: serial=8746 error=0 11:14:47 Received message from Master: op=Filter serial=8747 11:14:47 Color wheel filter change from 0 to 0 11:14:47 FLIGetFilterPos err=0 currentPosition=0 11:14:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:14:47 Filter is already there-color wheel unchanged 11:14:47 Received message from Master: op=Shutter serial=8748 11:14:47 Shutter LASER open 11:14:47 Received message from Camera: op=State serial=8750 11:14:47 GetSingleValue result=40 Value=cccccccc 11:14:47 SkyScan query 11:14:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:14:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:48 Parameters OK 11:14:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:48 Set A/D data flow result=40 11:14:48 Set A/D channel type result=40 11:14:48 Set A/D encoding result=40 11:14:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:48 Set channel filter=0.000000e+000 result=40 11:14:48 Config A/D Result=40 11:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:48 Get A/D filter: -9.255963e+061 result=40 11:14:48 Get A/D value=-858993460 result=40 11:14:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:14:48 Parameters OK 11:14:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:14:48 Set A/D data flow result=40 11:14:48 Set A/D channel type result=40 11:14:48 Set A/D encoding result=40 11:14:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:14:48 Set channel filter=0.000000e+000 result=40 11:14:48 Config A/D Result=40 11:14:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:14:48 Get A/D filter: -9.255963e+061 result=40 11:14:48 Get A/D value=-858993460 result=40 11:14:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:14:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:14:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:14:48 Aux= 11:14:48 Message to Camera, serial 8750 queued 11:14:50 Received message from Master: op=Shutter serial=8754 11:14:50 Shutter LASER close 11:14:51 Received message from Master: op=PointingHead serial=8758 11:14:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:14:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:14:51 Point started: ret=0 11:14:51 point_skyscan result=0 11:14:52 Check angles 11:14:52 SkyScan query 11:14:52 SkyScan query done: ret=0 az=89.865<-5991 ze=157.2<-1520 Statuses=0009 0009 11:14:52 Msec=0 True Az=89.865 Ze=157.2 Az status=0009 Ze status=0009 11:14:52 Check angles 11:14:52 SkyScan query 11:14:53 SkyScan query done: ret=0 az=72.015<-4801 ze=135.81<-2946 Statuses=0009 0009 11:14:53 Msec=750 True Az=72.015 Ze=135.81 Az status=0009 Ze status=0009 11:14:53 Check angles 11:14:53 SkyScan query 11:14:54 SkyScan query done: ret=0 az=54.675<-3645 ze=114.87<-4342 Statuses=0009 0009 11:14:54 Msec=1500 True Az=54.675 Ze=114.87 Az status=0009 Ze status=0009 11:14:54 Check angles 11:14:54 SkyScan query 11:14:55 SkyScan query done: ret=0 az=40.875<-2725 ze=93.93<-5738 Statuses=0009 0009 11:14:55 Msec=2250 True Az=40.875 Ze=93.93 Az status=0009 Ze status=0009 11:14:55 Check angles 11:14:55 SkyScan query 11:14:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 11:14:55 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 11:14:55 Check angles 11:14:55 SkyScan query 11:14:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 11:14:56 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 11:14:56 Check angles 11:14:56 SkyScan query 11:14:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:14:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:14:57 Message to Master queued w/err=0: serial=8758 error=0 11:15:02 Received message from Master: op=Filter serial=8759 11:15:02 Color wheel filter change from 0 to 0 11:15:02 FLIGetFilterPos err=0 currentPosition=0 11:15:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:02 Filter is already there-color wheel unchanged 11:15:02 Received message from Master: op=Shutter serial=8760 11:15:02 Shutter LASER close 11:15:02 Received message from Camera: op=State serial=8762 11:15:02 GetSingleValue result=40 Value=cccccccc 11:15:02 SkyScan query 11:15:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:03 Parameters OK 11:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:03 Set A/D data flow result=40 11:15:03 Set A/D channel type result=40 11:15:03 Set A/D encoding result=40 11:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:03 Set channel filter=0.000000e+000 result=40 11:15:03 Config A/D Result=40 11:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:03 Get A/D filter: -9.255963e+061 result=40 11:15:03 Get A/D value=-858993460 result=40 11:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:03 Parameters OK 11:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:03 Set A/D data flow result=40 11:15:03 Set A/D channel type result=40 11:15:03 Set A/D encoding result=40 11:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:03 Set channel filter=0.000000e+000 result=40 11:15:03 Config A/D Result=40 11:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:03 Get A/D filter: -9.255963e+061 result=40 11:15:03 Get A/D value=-858993460 result=40 11:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:03 Aux= 11:15:03 Message to Camera, serial 8762 queued 11:15:34 Received message from Master: op=PointingHead serial=8769 11:15:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:15:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:15:34 Point started: ret=0 11:15:34 point_skyscan result=0 11:15:35 Check angles 11:15:35 SkyScan query 11:15:35 SkyScan query done: ret=0 az=64.2<-4280 ze=66.54<-7564 Statuses=0009 0008 11:15:35 Msec=0 True Az=64.2 Ze=66.54 Az status=0009 Ze status=0008 11:15:35 Check angles 11:15:35 SkyScan query 11:15:36 SkyScan query done: ret=0 az=81.81<-5454 ze=66.51<-7566 Statuses=0009 0008 11:15:36 Msec=750 True Az=81.81 Ze=66.51 Az status=0009 Ze status=0008 11:15:36 Check angles 11:15:36 SkyScan query 11:15:37 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 11:15:37 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 11:15:37 Check angles 11:15:37 SkyScan query 11:15:37 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 11:15:37 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 11:15:38 Check angles 11:15:38 SkyScan query 11:15:38 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 11:15:38 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 11:15:38 Check angles 11:15:38 SkyScan query 11:15:39 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 11:15:39 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 11:15:39 Check angles 11:15:39 SkyScan query 11:15:40 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:15:40 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:15:40 Message to Master queued w/err=0: serial=8769 error=0 11:15:45 Received message from Master: op=Filter serial=8770 11:15:45 Color wheel filter change from 0 to 0 11:15:45 FLIGetFilterPos err=0 currentPosition=0 11:15:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:15:45 Filter is already there-color wheel unchanged 11:15:45 Received message from Master: op=Shutter serial=8771 11:15:45 Shutter LASER close 11:15:45 Received message from Camera: op=State serial=8773 11:15:45 GetSingleValue result=40 Value=cccccccc 11:15:45 SkyScan query 11:15:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:15:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:46 Parameters OK 11:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:46 Set A/D data flow result=40 11:15:46 Set A/D channel type result=40 11:15:46 Set A/D encoding result=40 11:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:46 Set channel filter=0.000000e+000 result=40 11:15:46 Config A/D Result=40 11:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:46 Get A/D filter: -9.255963e+061 result=40 11:15:46 Get A/D value=-858993460 result=40 11:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:15:46 Parameters OK 11:15:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:15:46 Set A/D data flow result=40 11:15:46 Set A/D channel type result=40 11:15:46 Set A/D encoding result=40 11:15:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:15:46 Set channel filter=0.000000e+000 result=40 11:15:46 Config A/D Result=40 11:15:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:15:46 Get A/D filter: -9.255963e+061 result=40 11:15:46 Get A/D value=-858993460 result=40 11:15:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:15:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:15:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:15:46 Aux= 11:15:46 Message to Camera, serial 8773 queued 11:16:16 Received message from Master: op=PointingHead serial=8780 11:16:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:16:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:16:17 Point started: ret=0 11:16:17 point_skyscan result=0 11:16:18 Check angles 11:16:18 SkyScan query 11:16:18 SkyScan query done: ret=0 az=134.64<-8976 ze=36.24<-9584 Statuses=0009 0009 11:16:18 Msec=0 True Az=134.64 Ze=36.24 Az status=0009 Ze status=0009 11:16:18 Check angles 11:16:18 SkyScan query 11:16:19 SkyScan query done: ret=0 az=117.06<-7804 ze=15.3<-10980 Statuses=0009 0009 11:16:19 Msec=750 True Az=117.06 Ze=15.3 Az status=0009 Ze status=0009 11:16:19 Check angles 11:16:19 SkyScan query 11:16:20 SkyScan query done: ret=0 az=99.555<-6637 ze=-6.09<-12406 Statuses=0009 0009 11:16:20 Msec=1500 True Az=99.555 Ze=-6.09 Az status=0009 Ze status=0009 11:16:20 Check angles 11:16:20 SkyScan query 11:16:20 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.7<-13780 Statuses=0009 0009 11:16:20 Msec=2250 True Az=82.275 Ze=-26.7 Az status=0009 Ze status=0009 11:16:21 Check angles 11:16:21 SkyScan query 11:16:21 SkyScan query done: ret=0 az=64.695<-4313 ze=-38.565<-14571 Statuses=0009 0008 11:16:21 Msec=3000 True Az=64.695 Ze=-38.565 Az status=0009 Ze status=0008 11:16:21 Check angles 11:16:21 SkyScan query 11:16:22 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 11:16:22 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 11:16:22 Check angles 11:16:22 SkyScan query 11:16:23 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 11:16:23 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 11:16:23 Message to Master queued w/err=0: serial=8780 error=0 11:16:28 Received message from Master: op=Filter serial=8781 11:16:28 Color wheel filter change from 0 to 0 11:16:28 FLIGetFilterPos err=0 currentPosition=0 11:16:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:16:28 Filter is already there-color wheel unchanged 11:16:28 Received message from Master: op=Shutter serial=8782 11:16:28 Shutter LASER close 11:16:28 Received message from Camera: op=State serial=8784 11:16:28 GetSingleValue result=40 Value=cccccccc 11:16:28 SkyScan query 11:16:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:28 Parameters OK 11:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:28 Set A/D data flow result=40 11:16:28 Set A/D channel type result=40 11:16:28 Set A/D encoding result=40 11:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:28 Set channel filter=0.000000e+000 result=40 11:16:28 Config A/D Result=40 11:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:28 Get A/D filter: -9.255963e+061 result=40 11:16:28 Get A/D value=-858993460 result=40 11:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:16:28 Parameters OK 11:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:16:28 Set A/D data flow result=40 11:16:28 Set A/D channel type result=40 11:16:28 Set A/D encoding result=40 11:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:16:28 Set channel filter=0.000000e+000 result=40 11:16:28 Config A/D Result=40 11:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:16:28 Get A/D filter: -9.255963e+061 result=40 11:16:28 Get A/D value=-858993460 result=40 11:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:16:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:16:28 Aux= 11:16:28 Message to Camera, serial 8784 queued 11:16:59 Received message from Master: op=PointingHead serial=8791 11:16:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:16:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:17:00 Point started: ret=0 11:17:00 point_skyscan result=0 11:17:00 Check angles 11:17:00 SkyScan query 11:17:01 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.25<-16550 Statuses=0009 0009 11:17:01 Msec=0 True Az=63.87 Ze=-68.25 Az status=0009 Ze status=0009 11:17:01 Check angles 11:17:01 SkyScan query 11:17:02 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.64<-17976 Statuses=0009 0009 11:17:02 Msec=750 True Az=81.885 Ze=-89.64 Az status=0009 Ze status=0009 11:17:02 Check angles 11:17:02 SkyScan query 11:17:02 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.015<-19401 Statuses=0009 0009 11:17:02 Msec=1500 True Az=99.705 Ze=-111.015 Az status=0009 Ze status=0009 11:17:03 Check angles 11:17:03 SkyScan query 11:17:03 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.985<-20799 Statuses=0009 0009 11:17:03 Msec=2250 True Az=117.09 Ze=-131.985 Az status=0009 Ze status=0009 11:17:03 Check angles 11:17:03 SkyScan query 11:17:04 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 11:17:04 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 11:17:04 Check angles 11:17:04 SkyScan query 11:17:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:17:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:17:05 Message to Master queued w/err=0: serial=8791 error=0 11:17:10 Received message from Master: op=Filter serial=8792 11:17:10 Color wheel filter change from 0 to 0 11:17:10 FLIGetFilterPos err=0 currentPosition=0 11:17:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:10 Filter is already there-color wheel unchanged 11:17:10 Received message from Master: op=Shutter serial=8793 11:17:10 Shutter LASER close 11:17:10 Received message from Camera: op=State serial=8795 11:17:10 GetSingleValue result=40 Value=cccccccc 11:17:10 SkyScan query 11:17:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:17:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:11 Parameters OK 11:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:11 Set A/D data flow result=40 11:17:11 Set A/D channel type result=40 11:17:11 Set A/D encoding result=40 11:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:11 Set channel filter=0.000000e+000 result=40 11:17:11 Config A/D Result=40 11:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:11 Get A/D filter: -9.255963e+061 result=40 11:17:11 Get A/D value=-858993460 result=40 11:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:11 Parameters OK 11:17:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:11 Set A/D data flow result=40 11:17:11 Set A/D channel type result=40 11:17:11 Set A/D encoding result=40 11:17:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:11 Set channel filter=0.000000e+000 result=40 11:17:11 Config A/D Result=40 11:17:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:11 Get A/D filter: -9.255963e+061 result=40 11:17:11 Get A/D value=-858993460 result=40 11:17:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:11 Aux= 11:17:11 Message to Camera, serial 8795 queued 11:17:41 Received message from Master: op=PointingHead serial=8802 11:17:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:17:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:17:42 Point started: ret=0 11:17:42 point_skyscan result=0 11:17:42 Check angles 11:17:42 SkyScan query 11:17:43 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.24<-23416 Statuses=0009 0009 11:17:43 Msec=0 True Az=113.025 Ze=-171.24 Az status=0009 Ze status=0009 11:17:43 Check angles 11:17:43 SkyScan query 11:17:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:17:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:17:44 Message to Master queued w/err=0: serial=8802 error=0 11:17:49 Received message from Master: op=Filter serial=8803 11:17:49 Color wheel filter change from 0 to 0 11:17:49 FLIGetFilterPos err=0 currentPosition=0 11:17:49 FLIGetStepsRemaining err=0 RemainingSteps=0 11:17:49 Filter is already there-color wheel unchanged 11:17:49 Received message from Master: op=Shutter serial=8804 11:17:49 Shutter LASER open 11:17:49 Received message from Camera: op=State serial=8806 11:17:49 GetSingleValue result=40 Value=cccccccc 11:17:49 SkyScan query 11:17:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:17:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:50 Parameters OK 11:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:50 Set A/D data flow result=40 11:17:50 Set A/D channel type result=40 11:17:50 Set A/D encoding result=40 11:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:50 Set channel filter=0.000000e+000 result=40 11:17:50 Config A/D Result=40 11:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:50 Get A/D filter: -9.255963e+061 result=40 11:17:50 Get A/D value=-858993460 result=40 11:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:17:50 Parameters OK 11:17:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:17:50 Set A/D data flow result=40 11:17:50 Set A/D channel type result=40 11:17:50 Set A/D encoding result=40 11:17:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:17:50 Set channel filter=0.000000e+000 result=40 11:17:50 Config A/D Result=40 11:17:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:17:50 Get A/D filter: -9.255963e+061 result=40 11:17:50 Get A/D value=-858993460 result=40 11:17:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:17:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:17:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:17:50 Aux= 11:17:50 Message to Camera, serial 8806 queued 11:17:52 Received message from Master: op=Shutter serial=8810 11:17:52 Shutter LASER close 11:17:53 Received message from Master: op=PointingHead serial=8814 11:17:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:17:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:17:53 Point started: ret=0 11:17:53 point_skyscan result=0 11:17:54 Check angles 11:17:54 SkyScan query 11:17:54 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.52<-21568 Statuses=0009 0009 11:17:54 Msec=0 True Az=135.735 Ze=-143.52 Az status=0009 Ze status=0009 11:17:55 Check angles 11:17:55 SkyScan query 11:17:55 SkyScan query done: ret=0 az=153.18<-10212 ze=-122.595<-20173 Statuses=0009 0009 11:17:55 Msec=750 True Az=153.18 Ze=-122.595 Az status=0009 Ze status=0009 11:17:55 Check angles 11:17:55 SkyScan query 11:17:56 SkyScan query done: ret=0 az=170.595<-11373 ze=-101.61<-18774 Statuses=0009 0009 11:17:56 Msec=1500 True Az=170.595 Ze=-101.61 Az status=0009 Ze status=0009 11:17:56 Check angles 11:17:56 SkyScan query 11:17:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.685<-17379 Statuses=0008 0009 11:17:57 Msec=2250 True Az=176.025 Ze=-80.685 Az status=0008 Ze status=0009 11:17:57 Check angles 11:17:57 SkyScan query 11:17:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.28<-15952 Statuses=0008 0009 11:17:57 Msec=3000 True Az=175.995 Ze=-59.28 Az status=0008 Ze status=0009 11:17:58 Check angles 11:17:58 SkyScan query 11:17:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:17:58 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:17:58 Message to Master queued w/err=0: serial=8814 error=0 11:18:03 Received message from Master: op=Filter serial=8815 11:18:03 Color wheel filter change from 0 to 0 11:18:03 FLIGetFilterPos err=0 currentPosition=0 11:18:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:03 Filter is already there-color wheel unchanged 11:18:03 Received message from Master: op=Shutter serial=8816 11:18:03 Shutter LASER close 11:18:04 Received message from Camera: op=State serial=8818 11:18:04 GetSingleValue result=40 Value=cccccccc 11:18:04 SkyScan query 11:18:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:18:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:04 Parameters OK 11:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:04 Set A/D data flow result=40 11:18:04 Set A/D channel type result=40 11:18:04 Set A/D encoding result=40 11:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:04 Set channel filter=0.000000e+000 result=40 11:18:04 Config A/D Result=40 11:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:04 Get A/D filter: -9.255963e+061 result=40 11:18:04 Get A/D value=-858993460 result=40 11:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:04 Parameters OK 11:18:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:04 Set A/D data flow result=40 11:18:04 Set A/D channel type result=40 11:18:04 Set A/D encoding result=40 11:18:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:04 Set channel filter=0.000000e+000 result=40 11:18:04 Config A/D Result=40 11:18:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:04 Get A/D filter: -9.255963e+061 result=40 11:18:04 Get A/D value=-858993460 result=40 11:18:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:04 Aux= 11:18:04 Message to Camera, serial 8818 queued 11:18:35 Received message from Master: op=PointingHead serial=8825 11:18:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:18:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:18:35 Point started: ret=0 11:18:35 point_skyscan result=0 11:18:36 Check angles 11:18:36 SkyScan query 11:18:37 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.705<-13447 Statuses=0009 0009 11:18:37 Msec=0 True Az=152.97 Ze=-21.705 Az status=0009 Ze status=0009 11:18:37 Check angles 11:18:37 SkyScan query 11:18:37 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.75<-12050 Statuses=0009 0009 11:18:37 Msec=750 True Az=135.435 Ze=-0.75 Az status=0009 Ze status=0009 11:18:38 Check angles 11:18:38 SkyScan query 11:18:38 SkyScan query done: ret=0 az=117.975<-7865 ze=20.205<-10653 Statuses=0009 0009 11:18:38 Msec=1500 True Az=117.975 Ze=20.205 Az status=0009 Ze status=0009 11:18:38 Check angles 11:18:38 SkyScan query 11:18:39 SkyScan query done: ret=0 az=100.575<-6705 ze=41.16<-9256 Statuses=0009 0009 11:18:39 Msec=2250 True Az=100.575 Ze=41.16 Az status=0009 Ze status=0009 11:18:39 Check angles 11:18:39 SkyScan query 11:18:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:18:40 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:18:40 Check angles 11:18:40 SkyScan query 11:18:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:18:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:18:40 Message to Master queued w/err=0: serial=8825 error=0 11:18:45 Received message from Master: op=Filter serial=8826 11:18:45 Color wheel filter change from 0 to 0 11:18:45 FLIGetFilterPos err=0 currentPosition=0 11:18:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:18:45 Filter is already there-color wheel unchanged 11:18:46 Received message from Master: op=Shutter serial=8827 11:18:46 Shutter LASER close 11:18:46 Received message from Camera: op=State serial=8829 11:18:46 GetSingleValue result=40 Value=cccccccc 11:18:46 SkyScan query 11:18:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:18:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:46 Parameters OK 11:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:46 Set A/D data flow result=40 11:18:46 Set A/D channel type result=40 11:18:46 Set A/D encoding result=40 11:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:46 Set channel filter=0.000000e+000 result=40 11:18:46 Config A/D Result=40 11:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:46 Get A/D filter: -9.255963e+061 result=40 11:18:46 Get A/D value=-858993460 result=40 11:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:18:46 Parameters OK 11:18:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:18:46 Set A/D data flow result=40 11:18:46 Set A/D channel type result=40 11:18:46 Set A/D encoding result=40 11:18:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:18:46 Set channel filter=0.000000e+000 result=40 11:18:46 Config A/D Result=40 11:18:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:18:46 Get A/D filter: -9.255963e+061 result=40 11:18:46 Get A/D value=-858993460 result=40 11:18:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:18:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:18:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:18:46 Aux= 11:18:46 Message to Camera, serial 8829 queued 11:19:17 Received message from Master: op=PointingHead serial=8836 11:19:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:19:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:19:17 Point started: ret=0 11:19:17 point_skyscan result=0 11:19:18 Check angles 11:19:18 SkyScan query 11:19:19 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 11:19:19 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 11:19:19 Check angles 11:19:19 SkyScan query 11:19:20 SkyScan query done: ret=0 az=127.2<-8480 ze=38.505<-9433 Statuses=0009 0008 11:19:20 Msec=750 True Az=127.2 Ze=38.505 Az status=0009 Ze status=0008 11:19:20 Check angles 11:19:20 SkyScan query 11:19:20 SkyScan query done: ret=0 az=144.69<-9646 ze=38.505<-9433 Statuses=0009 0008 11:19:20 Msec=1500 True Az=144.69 Ze=38.505 Az status=0009 Ze status=0008 11:19:20 Check angles 11:19:20 SkyScan query 11:19:21 SkyScan query done: ret=0 az=162.21<-10814 ze=38.505<-9433 Statuses=0009 0008 11:19:21 Msec=2250 True Az=162.21 Ze=38.505 Az status=0009 Ze status=0008 11:19:21 Check angles 11:19:21 SkyScan query 11:19:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:19:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:19:22 Check angles 11:19:22 SkyScan query 11:19:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:19:23 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 11:19:23 Message to Master queued w/err=0: serial=8836 error=0 11:19:28 Received message from Master: op=Filter serial=8837 11:19:28 Color wheel filter change from 0 to 0 11:19:28 FLIGetFilterPos err=0 currentPosition=0 11:19:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:19:28 Filter is already there-color wheel unchanged 11:19:28 Received message from Master: op=Shutter serial=8838 11:19:28 Shutter LASER close 11:19:28 Received message from Camera: op=State serial=8840 11:19:28 GetSingleValue result=40 Value=cccccccc 11:19:28 SkyScan query 11:19:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:19:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:28 Parameters OK 11:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:28 Set A/D data flow result=40 11:19:28 Set A/D channel type result=40 11:19:28 Set A/D encoding result=40 11:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:28 Set channel filter=0.000000e+000 result=40 11:19:28 Config A/D Result=40 11:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:28 Get A/D filter: -9.255963e+061 result=40 11:19:28 Get A/D value=-858993460 result=40 11:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:19:28 Parameters OK 11:19:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:19:28 Set A/D data flow result=40 11:19:28 Set A/D channel type result=40 11:19:28 Set A/D encoding result=40 11:19:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:19:28 Set channel filter=0.000000e+000 result=40 11:19:28 Config A/D Result=40 11:19:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:19:28 Get A/D filter: -9.255963e+061 result=40 11:19:28 Get A/D value=-858993460 result=40 11:19:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:19:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:19:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:19:28 Aux= 11:19:28 Message to Camera, serial 8840 queued 11:19:59 Received message from Master: op=PointingHead serial=8847 11:19:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:19:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:20:00 Point started: ret=0 11:20:00 point_skyscan result=0 11:20:00 Check angles 11:20:00 SkyScan query 11:20:01 SkyScan query done: ret=0 az=153.18<-10212 ze=8.865<-11409 Statuses=0009 0009 11:20:01 Msec=0 True Az=153.18 Ze=8.865 Az status=0009 Ze status=0009 11:20:01 Check angles 11:20:01 SkyScan query 11:20:02 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.045<-12803 Statuses=0009 0009 11:20:02 Msec=750 True Az=135.705 Ze=-12.045 Az status=0009 Ze status=0009 11:20:02 Check angles 11:20:02 SkyScan query 11:20:02 SkyScan query done: ret=0 az=118.245<-7883 ze=-33<-14200 Statuses=0009 0009 11:20:02 Msec=1500 True Az=118.245 Ze=-33 Az status=0009 Ze status=0009 11:20:03 Check angles 11:20:03 SkyScan query 11:20:03 SkyScan query done: ret=0 az=100.8<-6720 ze=-51.495<-15433 Statuses=0009 0009 11:20:03 Msec=2250 True Az=100.8 Ze=-51.495 Az status=0009 Ze status=0009 11:20:03 Check angles 11:20:03 SkyScan query 11:20:04 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:20:04 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:20:04 Check angles 11:20:04 SkyScan query 11:20:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 11:20:05 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 11:20:05 Message to Master queued w/err=0: serial=8847 error=0 11:20:10 Received message from Master: op=Filter serial=8848 11:20:10 Color wheel filter change from 0 to 0 11:20:10 FLIGetFilterPos err=0 currentPosition=0 11:20:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:10 Filter is already there-color wheel unchanged 11:20:10 Received message from Master: op=Shutter serial=8849 11:20:10 Shutter LASER close 11:20:10 Received message from Camera: op=State serial=8851 11:20:10 GetSingleValue result=40 Value=cccccccc 11:20:10 SkyScan query 11:20:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:20:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:10 Parameters OK 11:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:10 Set A/D data flow result=40 11:20:10 Set A/D channel type result=40 11:20:10 Set A/D encoding result=40 11:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:10 Set channel filter=0.000000e+000 result=40 11:20:10 Config A/D Result=40 11:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:10 Get A/D filter: -9.255963e+061 result=40 11:20:10 Get A/D value=-858993460 result=40 11:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:10 Parameters OK 11:20:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:10 Set A/D data flow result=40 11:20:10 Set A/D channel type result=40 11:20:10 Set A/D encoding result=40 11:20:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:10 Set channel filter=0.000000e+000 result=40 11:20:10 Config A/D Result=40 11:20:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:10 Get A/D filter: -9.255963e+061 result=40 11:20:10 Get A/D value=-858993460 result=40 11:20:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:10 Aux= 11:20:10 Message to Camera, serial 8851 queued 11:20:41 Received message from Master: op=PointingHead serial=8858 11:20:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:20:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:20:42 Point started: ret=0 11:20:42 point_skyscan result=0 11:20:42 Check angles 11:20:42 SkyScan query 11:20:43 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.48<-17432 Statuses=0009 0009 11:20:43 Msec=0 True Az=109.185 Ze=-81.48 Az status=0009 Ze status=0009 11:20:43 Check angles 11:20:43 SkyScan query 11:20:44 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.42<-18828 Statuses=0008 0009 11:20:44 Msec=750 True Az=113.01 Ze=-102.42 Az status=0008 Ze status=0009 11:20:44 Check angles 11:20:44 SkyScan query 11:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 11:20:45 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 11:20:45 Check angles 11:20:45 SkyScan query 11:20:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.33<-21622 Statuses=0008 0009 11:20:45 Msec=2250 True Az=112.995 Ze=-144.33 Az status=0008 Ze status=0009 11:20:45 Check angles 11:20:45 SkyScan query 11:20:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.285<-23019 Statuses=0008 0009 11:20:46 Msec=3000 True Az=112.995 Ze=-165.285 Az status=0008 Ze status=0009 11:20:46 Check angles 11:20:46 SkyScan query 11:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:20:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:20:47 Message to Master queued w/err=0: serial=8858 error=0 11:20:52 Received message from Master: op=Filter serial=8859 11:20:52 Color wheel filter change from 0 to 0 11:20:52 FLIGetFilterPos err=0 currentPosition=0 11:20:52 FLIGetStepsRemaining err=0 RemainingSteps=0 11:20:52 Filter is already there-color wheel unchanged 11:20:52 Received message from Master: op=Shutter serial=8860 11:20:52 Shutter LASER open 11:20:52 Received message from Camera: op=State serial=8862 11:20:52 GetSingleValue result=40 Value=cccccccc 11:20:52 SkyScan query 11:20:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:20:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:53 Parameters OK 11:20:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:53 Set A/D data flow result=40 11:20:53 Set A/D channel type result=40 11:20:53 Set A/D encoding result=40 11:20:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:53 Set channel filter=0.000000e+000 result=40 11:20:53 Config A/D Result=40 11:20:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:53 Get A/D filter: -9.255963e+061 result=40 11:20:53 Get A/D value=-858993460 result=40 11:20:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:20:53 Parameters OK 11:20:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:20:53 Set A/D data flow result=40 11:20:53 Set A/D channel type result=40 11:20:53 Set A/D encoding result=40 11:20:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:20:53 Set channel filter=0.000000e+000 result=40 11:20:53 Config A/D Result=40 11:20:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:20:53 Get A/D filter: -9.255963e+061 result=40 11:20:53 Get A/D value=-858993460 result=40 11:20:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:20:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:20:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:20:53 Aux= 11:20:53 Message to Camera, serial 8862 queued 11:20:55 Received message from Master: op=Shutter serial=8866 11:20:55 Shutter LASER close 11:20:56 Received message from Master: op=PointingHead serial=8870 11:20:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:20:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-4 11:20:56] 11:20:56 Point started: ret=0 11:20:56 point_skyscan result=0 11:20:57 Check angles 11:20:57 SkyScan query 11:20:57 SkyScan query done: ret=0 az=88.23<-5882 ze=155.175<-1655 Statuses=0009 0009 11:20:57 Msec=0 True Az=88.23 Ze=155.175 Az status=0009 Ze status=0009 11:20:58 Check angles 11:20:58 SkyScan query 11:20:58 SkyScan query done: ret=0 az=70.41<-4694 ze=133.8<-3080 Statuses=0009 0009 11:20:58 Msec=750 True Az=70.41 Ze=133.8 Az status=0009 Ze status=0009 11:20:58 Check angles 11:20:58 SkyScan query 11:20:59 SkyScan query done: ret=0 az=52.92<-3528 ze=112.8<-4480 Statuses=0009 0009 11:20:59 Msec=1500 True Az=52.92 Ze=112.8 Az status=0009 Ze status=0009 11:20:59 Check angles 11:20:59 SkyScan query 11:21:00 SkyScan query done: ret=0 az=41.07<-2738 ze=91.845<-5877 Statuses=0008 0009 11:21:00 Msec=2250 True Az=41.07 Ze=91.845 Az status=0008 Ze status=0009 11:21:00 Check angles 11:21:00 SkyScan query 11:21:00 SkyScan query done: ret=0 az=40.995<-2733 ze=70.845<-7277 Statuses=0008 0009 11:21:00 Msec=3000 True Az=40.995 Ze=70.845 Az status=0008 Ze status=0009 11:21:01 Check angles 11:21:01 SkyScan query 11:21:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.675<-8555 Statuses=0008 0009 11:21:01 Msec=3750 True Az=40.995 Ze=51.675 Az status=0008 Ze status=0009 11:21:01 Check angles 11:21:01 SkyScan query 11:21:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:21:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:21:02 Message to Master queued w/err=0: serial=8870 error=0 11:21:07 Received message from Master: op=Filter serial=8871 11:21:07 Color wheel filter change from 0 to 0 11:21:07 FLIGetFilterPos err=0 currentPosition=0 11:21:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:07 Filter is already there-color wheel unchanged 11:21:07 Received message from Master: op=Shutter serial=8872 11:21:07 Shutter LASER close 11:21:07 Received message from Camera: op=State serial=8874 11:21:07 GetSingleValue result=40 Value=cccccccc 11:21:07 SkyScan query 11:21:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:21:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:08 Parameters OK 11:21:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:08 Set A/D data flow result=40 11:21:08 Set A/D channel type result=40 11:21:08 Set A/D encoding result=40 11:21:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:08 Set channel filter=0.000000e+000 result=40 11:21:08 Config A/D Result=40 11:21:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:08 Get A/D filter: -9.255963e+061 result=40 11:21:08 Get A/D value=-858993460 result=40 11:21:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:08 Parameters OK 11:21:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:08 Set A/D data flow result=40 11:21:08 Set A/D channel type result=40 11:21:08 Set A/D encoding result=40 11:21:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:08 Set channel filter=0.000000e+000 result=40 11:21:08 Config A/D Result=40 11:21:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:08 Get A/D filter: -9.255963e+061 result=40 11:21:08 Get A/D value=-858993460 result=40 11:21:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:08 Aux= 11:21:08 Message to Camera, serial 8874 queued 11:21:39 Received message from Master: op=PointingHead serial=8881 11:21:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:21:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:21:39 Point started: ret=0 11:21:39 point_skyscan result=0 11:21:40 Check angles 11:21:40 SkyScan query 11:21:40 SkyScan query done: ret=0 az=63.675<-4245 ze=66.555<-7563 Statuses=0009 0008 11:21:40 Msec=0 True Az=63.675 Ze=66.555 Az status=0009 Ze status=0008 11:21:40 Check angles 11:21:40 SkyScan query 11:21:41 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 11:21:41 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 11:21:41 Check angles 11:21:41 SkyScan query 11:21:42 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 11:21:42 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 11:21:42 Check angles 11:21:42 SkyScan query 11:21:43 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 11:21:43 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 11:21:43 Check angles 11:21:43 SkyScan query 11:21:43 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 11:21:43 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 11:21:43 Check angles 11:21:43 SkyScan query 11:21:44 SkyScan query done: ret=0 az=151.35<-10090 ze=66.495<-7567 Statuses=0009 0008 11:21:44 Msec=3750 True Az=151.35 Ze=66.495 Az status=0009 Ze status=0008 11:21:44 Check angles 11:21:44 SkyScan query 11:21:45 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:21:45 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:21:45 Message to Master queued w/err=0: serial=8881 error=0 11:21:49 Received message from Master: op=Identify serial=8882 11:21:50 Received message from Master: op=Filter serial=8885 11:21:50 Color wheel filter change from 0 to 0 11:21:50 FLIGetFilterPos err=0 currentPosition=0 11:21:50 FLIGetStepsRemaining err=0 RemainingSteps=0 11:21:50 Filter is already there-color wheel unchanged 11:21:50 Received message from Master: op=Shutter serial=8886 11:21:50 Shutter LASER close 11:21:50 Received message from Camera: op=State serial=8888 11:21:50 GetSingleValue result=40 Value=cccccccc 11:21:50 SkyScan query 11:21:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:21:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:51 Parameters OK 11:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:51 Set A/D data flow result=40 11:21:51 Set A/D channel type result=40 11:21:51 Set A/D encoding result=40 11:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:51 Set channel filter=0.000000e+000 result=40 11:21:51 Config A/D Result=40 11:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:51 Get A/D filter: -9.255963e+061 result=40 11:21:51 Get A/D value=-858993460 result=40 11:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:21:51 Parameters OK 11:21:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:21:51 Set A/D data flow result=40 11:21:51 Set A/D channel type result=40 11:21:51 Set A/D encoding result=40 11:21:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:21:51 Set channel filter=0.000000e+000 result=40 11:21:51 Config A/D Result=40 11:21:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:21:51 Get A/D filter: -9.255963e+061 result=40 11:21:51 Get A/D value=-858993460 result=40 11:21:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:21:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:21:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:21:51 Aux= 11:21:51 Message to Camera, serial 8888 queued 11:22:21 Received message from Master: op=PointingHead serial=8895 11:22:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:22:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:22:22 Point started: ret=0 11:22:22 point_skyscan result=0 11:22:23 Check angles 11:22:23 SkyScan query 11:22:23 SkyScan query done: ret=0 az=134.88<-8992 ze=36.57<-9562 Statuses=0009 0009 11:22:23 Msec=0 True Az=134.88 Ze=36.57 Az status=0009 Ze status=0009 11:22:23 Check angles 11:22:23 SkyScan query 11:22:24 SkyScan query done: ret=0 az=116.985<-7799 ze=15.15<-10990 Statuses=0009 0009 11:22:24 Msec=750 True Az=116.985 Ze=15.15 Az status=0009 Ze status=0009 11:22:24 Check angles 11:22:24 SkyScan query 11:22:25 SkyScan query done: ret=0 az=99.585<-6639 ze=-5.82<-12388 Statuses=0009 0009 11:22:25 Msec=1500 True Az=99.585 Ze=-5.82 Az status=0009 Ze status=0009 11:22:25 Check angles 11:22:25 SkyScan query 11:22:25 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.775<-13785 Statuses=0009 0009 11:22:25 Msec=2250 True Az=82.05 Ze=-26.775 Az status=0009 Ze status=0009 11:22:26 Check angles 11:22:26 SkyScan query 11:22:26 SkyScan query done: ret=0 az=64.62<-4308 ze=-38.565<-14571 Statuses=0009 0008 11:22:26 Msec=3000 True Az=64.62 Ze=-38.565 Az status=0009 Ze status=0008 11:22:26 Check angles 11:22:26 SkyScan query 11:22:27 SkyScan query done: ret=0 az=47.145<-3143 ze=-38.52<-14568 Statuses=0009 0008 11:22:27 Msec=3750 True Az=47.145 Ze=-38.52 Az status=0009 Ze status=0008 11:22:27 Check angles 11:22:27 SkyScan query 11:22:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:22:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:22:28 Message to Master queued w/err=0: serial=8895 error=0 11:22:33 Received message from Master: op=Filter serial=8896 11:22:33 Color wheel filter change from 0 to 0 11:22:33 FLIGetFilterPos err=0 currentPosition=0 11:22:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:22:33 Filter is already there-color wheel unchanged 11:22:33 Received message from Master: op=Shutter serial=8897 11:22:33 Shutter LASER close 11:22:33 Received message from Camera: op=State serial=8899 11:22:33 GetSingleValue result=40 Value=cccccccc 11:22:33 SkyScan query 11:22:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:22:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:33 Parameters OK 11:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:33 Set A/D data flow result=40 11:22:33 Set A/D channel type result=40 11:22:33 Set A/D encoding result=40 11:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:33 Set channel filter=0.000000e+000 result=40 11:22:33 Config A/D Result=40 11:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:33 Get A/D filter: -9.255963e+061 result=40 11:22:33 Get A/D value=-858993460 result=40 11:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:22:33 Parameters OK 11:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:22:33 Set A/D data flow result=40 11:22:33 Set A/D channel type result=40 11:22:33 Set A/D encoding result=40 11:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:22:33 Set channel filter=0.000000e+000 result=40 11:22:33 Config A/D Result=40 11:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:22:33 Get A/D filter: -9.255963e+061 result=40 11:22:33 Get A/D value=-858993460 result=40 11:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:22:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:22:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:22:33 Aux= 11:22:33 Message to Camera, serial 8899 queued 11:23:04 Received message from Master: op=PointingHead serial=8906 11:23:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:23:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:23:05 Point started: ret=0 11:23:05 point_skyscan result=0 11:23:05 Check angles 11:23:05 SkyScan query 11:23:06 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.205<-16547 Statuses=0009 0009 11:23:06 Msec=0 True Az=63.855 Ze=-68.205 Az status=0009 Ze status=0009 11:23:06 Check angles 11:23:06 SkyScan query 11:23:07 SkyScan query done: ret=0 az=81.435<-5429 ze=-89.19<-17946 Statuses=0009 0009 11:23:07 Msec=750 True Az=81.435 Ze=-89.19 Az status=0009 Ze status=0009 11:23:07 Check angles 11:23:07 SkyScan query 11:23:08 SkyScan query done: ret=0 az=98.79<-6586 ze=-110.1<-19340 Statuses=0009 0009 11:23:08 Msec=1500 True Az=98.79 Ze=-110.1 Az status=0009 Ze status=0009 11:23:08 Check angles 11:23:08 SkyScan query 11:23:08 SkyScan query done: ret=0 az=116.355<-7757 ze=-131.055<-20737 Statuses=0009 0009 11:23:08 Msec=2250 True Az=116.355 Ze=-131.055 Az status=0009 Ze status=0009 11:23:08 Check angles 11:23:08 SkyScan query 11:23:09 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.525<-21435 Statuses=0009 0008 11:23:09 Msec=3000 True Az=130.98 Ze=-141.525 Az status=0009 Ze status=0008 11:23:09 Check angles 11:23:09 SkyScan query 11:23:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:23:10 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:23:10 Message to Master queued w/err=0: serial=8906 error=0 11:23:15 Received message from Master: op=Filter serial=8907 11:23:15 Color wheel filter change from 0 to 0 11:23:15 FLIGetFilterPos err=0 currentPosition=0 11:23:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:15 Filter is already there-color wheel unchanged 11:23:15 Received message from Master: op=Shutter serial=8908 11:23:15 Shutter LASER close 11:23:15 Received message from Camera: op=State serial=8910 11:23:15 GetSingleValue result=40 Value=cccccccc 11:23:15 SkyScan query 11:23:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:23:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:16 Parameters OK 11:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:16 Set A/D data flow result=40 11:23:16 Set A/D channel type result=40 11:23:16 Set A/D encoding result=40 11:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:16 Set channel filter=0.000000e+000 result=40 11:23:16 Config A/D Result=40 11:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:16 Get A/D filter: -9.255963e+061 result=40 11:23:16 Get A/D value=-858993460 result=40 11:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:16 Parameters OK 11:23:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:16 Set A/D data flow result=40 11:23:16 Set A/D channel type result=40 11:23:16 Set A/D encoding result=40 11:23:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:16 Set channel filter=0.000000e+000 result=40 11:23:16 Config A/D Result=40 11:23:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:16 Get A/D filter: -9.255963e+061 result=40 11:23:16 Get A/D value=-858993460 result=40 11:23:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:16 Aux= 11:23:16 Message to Camera, serial 8910 queued 11:23:46 Received message from Master: op=PointingHead serial=8917 11:23:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:23:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:23:47 Point started: ret=0 11:23:47 point_skyscan result=0 11:23:48 Check angles 11:23:48 SkyScan query 11:23:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.48<-23432 Statuses=0009 0009 11:23:48 Msec=0 True Az=113.01 Ze=-171.48 Az status=0009 Ze status=0009 11:23:48 Check angles 11:23:48 SkyScan query 11:23:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:23:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:23:49 Message to Master queued w/err=0: serial=8917 error=0 11:23:54 Received message from Master: op=Filter serial=8918 11:23:54 Color wheel filter change from 0 to 0 11:23:54 FLIGetFilterPos err=0 currentPosition=0 11:23:54 FLIGetStepsRemaining err=0 RemainingSteps=0 11:23:54 Filter is already there-color wheel unchanged 11:23:54 Received message from Master: op=Shutter serial=8919 11:23:54 Shutter LASER open 11:23:54 Received message from Camera: op=State serial=8921 11:23:54 GetSingleValue result=40 Value=cccccccc 11:23:54 SkyScan query 11:23:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:23:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:55 Parameters OK 11:23:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:55 Set A/D data flow result=40 11:23:55 Set A/D channel type result=40 11:23:55 Set A/D encoding result=40 11:23:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:55 Set channel filter=0.000000e+000 result=40 11:23:55 Config A/D Result=40 11:23:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:55 Get A/D filter: -9.255963e+061 result=40 11:23:55 Get A/D value=-858993460 result=40 11:23:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:23:55 Parameters OK 11:23:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:23:55 Set A/D data flow result=40 11:23:55 Set A/D channel type result=40 11:23:55 Set A/D encoding result=40 11:23:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:23:55 Set channel filter=0.000000e+000 result=40 11:23:55 Config A/D Result=40 11:23:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:23:55 Get A/D filter: -9.255963e+061 result=40 11:23:55 Get A/D value=-858993460 result=40 11:23:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:23:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:23:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:23:55 Aux= 11:23:55 Message to Camera, serial 8921 queued 11:23:57 Received message from Master: op=Shutter serial=8925 11:23:57 Shutter LASER close 11:23:58 Received message from Master: op=PointingHead serial=8929 11:23:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:23:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:23:58 Point started: ret=0 11:23:58 point_skyscan result=0 11:23:59 Check angles 11:23:59 SkyScan query 11:24:00 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.77<-21518 Statuses=0009 0009 11:24:00 Msec=0 True Az=136.365 Ze=-142.77 Az status=0009 Ze status=0009 11:24:00 Check angles 11:24:00 SkyScan query 11:24:00 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.815<-20121 Statuses=0009 0009 11:24:00 Msec=750 True Az=153.9 Ze=-121.815 Az status=0009 Ze status=0009 11:24:00 Check angles 11:24:00 SkyScan query 11:24:01 SkyScan query done: ret=0 az=171.225<-11415 ze=-100.875<-18725 Statuses=0009 0009 11:24:01 Msec=1500 True Az=171.225 Ze=-100.875 Az status=0009 Ze status=0009 11:24:01 Check angles 11:24:01 SkyScan query 11:24:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.485<-17299 Statuses=0008 0009 11:24:02 Msec=2250 True Az=176.01 Ze=-79.485 Az status=0008 Ze status=0009 11:24:02 Check angles 11:24:02 SkyScan query 11:24:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.53<-15902 Statuses=0008 0009 11:24:03 Msec=3000 True Az=175.995 Ze=-58.53 Az status=0008 Ze status=0009 11:24:03 Check angles 11:24:03 SkyScan query 11:24:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:24:03 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:24:03 Message to Master queued w/err=0: serial=8929 error=0 11:24:08 Received message from Master: op=Filter serial=8930 11:24:08 Color wheel filter change from 0 to 0 11:24:08 FLIGetFilterPos err=0 currentPosition=0 11:24:08 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:08 Filter is already there-color wheel unchanged 11:24:08 Received message from Master: op=Shutter serial=8931 11:24:08 Shutter LASER close 11:24:09 Received message from Camera: op=State serial=8933 11:24:09 GetSingleValue result=40 Value=cccccccc 11:24:09 SkyScan query 11:24:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:24:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:09 Parameters OK 11:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:09 Set A/D data flow result=40 11:24:09 Set A/D channel type result=40 11:24:09 Set A/D encoding result=40 11:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:09 Set channel filter=0.000000e+000 result=40 11:24:09 Config A/D Result=40 11:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:09 Get A/D filter: -9.255963e+061 result=40 11:24:09 Get A/D value=-858993460 result=40 11:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:09 Parameters OK 11:24:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:09 Set A/D data flow result=40 11:24:09 Set A/D channel type result=40 11:24:09 Set A/D encoding result=40 11:24:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:09 Set channel filter=0.000000e+000 result=40 11:24:09 Config A/D Result=40 11:24:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:09 Get A/D filter: -9.255963e+061 result=40 11:24:09 Get A/D value=-858993460 result=40 11:24:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:09 Aux= 11:24:09 Message to Camera, serial 8933 queued 11:24:40 Received message from Master: op=PointingHead serial=8940 11:24:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:24:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:24:40 Point started: ret=0 11:24:40 point_skyscan result=0 11:24:41 Check angles 11:24:41 SkyScan query 11:24:42 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.855<-13457 Statuses=0009 0009 11:24:42 Msec=0 True Az=153.12 Ze=-21.855 Az status=0009 Ze status=0009 11:24:42 Check angles 11:24:42 SkyScan query 11:24:43 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.51<-12034 Statuses=0009 0009 11:24:43 Msec=750 True Az=135.315 Ze=-0.51 Az status=0009 Ze status=0009 11:24:43 Check angles 11:24:43 SkyScan query 11:24:43 SkyScan query done: ret=0 az=117.405<-7827 ze=20.91<-10606 Statuses=0009 0009 11:24:43 Msec=1500 True Az=117.405 Ze=20.91 Az status=0009 Ze status=0009 11:24:43 Check angles 11:24:43 SkyScan query 11:24:44 SkyScan query done: ret=0 az=100.005<-6667 ze=41.85<-9210 Statuses=0009 0009 11:24:44 Msec=2250 True Az=100.005 Ze=41.85 Az status=0009 Ze status=0009 11:24:44 Check angles 11:24:44 SkyScan query 11:24:45 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:24:45 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:24:45 Check angles 11:24:45 SkyScan query 11:24:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:24:46 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:24:46 Message to Master queued w/err=0: serial=8940 error=0 11:24:51 Received message from Master: op=Filter serial=8941 11:24:51 Color wheel filter change from 0 to 0 11:24:51 FLIGetFilterPos err=0 currentPosition=0 11:24:51 FLIGetStepsRemaining err=0 RemainingSteps=0 11:24:51 Filter is already there-color wheel unchanged 11:24:51 Received message from Master: op=Shutter serial=8942 11:24:51 Shutter LASER close 11:24:51 Received message from Camera: op=State serial=8944 11:24:51 GetSingleValue result=40 Value=cccccccc 11:24:51 SkyScan query 11:24:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:24:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:51 Parameters OK 11:24:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:51 Set A/D data flow result=40 11:24:51 Set A/D channel type result=40 11:24:51 Set A/D encoding result=40 11:24:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:51 Set channel filter=0.000000e+000 result=40 11:24:51 Config A/D Result=40 11:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:51 Get A/D filter: -9.255963e+061 result=40 11:24:51 Get A/D value=-858993460 result=40 11:24:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:24:51 Parameters OK 11:24:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:24:51 Set A/D data flow result=40 11:24:51 Set A/D channel type result=40 11:24:51 Set A/D encoding result=40 11:24:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:24:51 Set channel filter=0.000000e+000 result=40 11:24:51 Config A/D Result=40 11:24:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:24:51 Get A/D filter: -9.255963e+061 result=40 11:24:51 Get A/D value=-858993460 result=40 11:24:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:24:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:24:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:24:51 Aux= 11:24:51 Message to Camera, serial 8944 queued 11:25:22 Received message from Master: op=PointingHead serial=8951 11:25:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:25:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:25:23 Point started: ret=0 11:25:23 point_skyscan result=0 11:25:23 Check angles 11:25:23 SkyScan query 11:25:24 SkyScan query done: ret=0 az=108.81<-7254 ze=38.49<-9434 Statuses=0009 0008 11:25:24 Msec=0 True Az=108.81 Ze=38.49 Az status=0009 Ze status=0008 11:25:24 Check angles 11:25:24 SkyScan query 11:25:25 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 11:25:25 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 11:25:25 Check angles 11:25:25 SkyScan query 11:25:25 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 11:25:25 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 11:25:26 Check angles 11:25:26 SkyScan query 11:25:26 SkyScan query done: ret=0 az=161.535<-10769 ze=38.505<-9433 Statuses=0009 0008 11:25:26 Msec=2250 True Az=161.535 Ze=38.505 Az status=0009 Ze status=0008 11:25:26 Check angles 11:25:26 SkyScan query 11:25:27 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 11:25:27 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 11:25:27 Check angles 11:25:27 SkyScan query 11:25:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:25:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:25:28 Message to Master queued w/err=0: serial=8951 error=0 11:25:33 Received message from Master: op=Filter serial=8952 11:25:33 Color wheel filter change from 0 to 0 11:25:33 FLIGetFilterPos err=0 currentPosition=0 11:25:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:25:33 Filter is already there-color wheel unchanged 11:25:33 Received message from Master: op=Shutter serial=8953 11:25:33 Shutter LASER close 11:25:33 Received message from Camera: op=State serial=8955 11:25:33 GetSingleValue result=40 Value=cccccccc 11:25:33 SkyScan query 11:25:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:25:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:33 Parameters OK 11:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:33 Set A/D data flow result=40 11:25:33 Set A/D channel type result=40 11:25:33 Set A/D encoding result=40 11:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:33 Set channel filter=0.000000e+000 result=40 11:25:33 Config A/D Result=40 11:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:33 Get A/D filter: -9.255963e+061 result=40 11:25:33 Get A/D value=-858993460 result=40 11:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:25:33 Parameters OK 11:25:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:25:33 Set A/D data flow result=40 11:25:33 Set A/D channel type result=40 11:25:33 Set A/D encoding result=40 11:25:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:25:33 Set channel filter=0.000000e+000 result=40 11:25:33 Config A/D Result=40 11:25:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:25:33 Get A/D filter: -9.255963e+061 result=40 11:25:33 Get A/D value=-858993460 result=40 11:25:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:25:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:25:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:25:33 Aux= 11:25:33 Message to Camera, serial 8955 queued 11:26:04 Received message from Master: op=PointingHead serial=8962 11:26:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:26:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:26:05 Point started: ret=0 11:26:05 point_skyscan result=0 11:26:05 Check angles 11:26:05 SkyScan query 11:26:06 SkyScan query done: ret=0 az=153.24<-10216 ze=8.97<-11402 Statuses=0009 0009 11:26:06 Msec=0 True Az=153.24 Ze=8.97 Az status=0009 Ze status=0009 11:26:06 Check angles 11:26:06 SkyScan query 11:26:07 SkyScan query done: ret=0 az=135.825<-9055 ze=-11.955<-12797 Statuses=0009 0009 11:26:07 Msec=750 True Az=135.825 Ze=-11.955 Az status=0009 Ze status=0009 11:26:07 Check angles 11:26:07 SkyScan query 11:26:07 SkyScan query done: ret=0 az=118.305<-7887 ze=-32.94<-14196 Statuses=0009 0009 11:26:07 Msec=1500 True Az=118.305 Ze=-32.94 Az status=0009 Ze status=0009 11:26:08 Check angles 11:26:08 SkyScan query 11:26:08 SkyScan query done: ret=0 az=100.875<-6725 ze=-51.495<-15433 Statuses=0009 0009 11:26:08 Msec=2250 True Az=100.875 Ze=-51.495 Az status=0009 Ze status=0009 11:26:08 Check angles 11:26:08 SkyScan query 11:26:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:26:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:26:09 Check angles 11:26:09 SkyScan query 11:26:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 11:26:10 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 11:26:10 Message to Master queued w/err=0: serial=8962 error=0 11:26:15 Received message from Master: op=Filter serial=8963 11:26:15 Color wheel filter change from 0 to 0 11:26:15 FLIGetFilterPos err=0 currentPosition=0 11:26:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:15 Filter is already there-color wheel unchanged 11:26:15 Received message from Master: op=Shutter serial=8964 11:26:15 Shutter LASER close 11:26:15 Received message from Camera: op=State serial=8966 11:26:15 GetSingleValue result=40 Value=cccccccc 11:26:15 SkyScan query 11:26:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:26:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:15 Parameters OK 11:26:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:15 Set A/D data flow result=40 11:26:15 Set A/D channel type result=40 11:26:15 Set A/D encoding result=40 11:26:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:15 Set channel filter=0.000000e+000 result=40 11:26:15 Config A/D Result=40 11:26:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:15 Get A/D filter: -9.255963e+061 result=40 11:26:15 Get A/D value=-858993460 result=40 11:26:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:15 Parameters OK 11:26:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:15 Set A/D data flow result=40 11:26:15 Set A/D channel type result=40 11:26:15 Set A/D encoding result=40 11:26:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:15 Set channel filter=0.000000e+000 result=40 11:26:15 Config A/D Result=40 11:26:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:15 Get A/D filter: -9.255963e+061 result=40 11:26:15 Get A/D value=-858993460 result=40 11:26:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:15 Aux= 11:26:15 Message to Camera, serial 8966 queued 11:26:46 Received message from Master: op=PointingHead serial=8973 11:26:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:26:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:26:47 Point started: ret=0 11:26:47 point_skyscan result=0 11:26:47 Check angles 11:26:47 SkyScan query 11:26:48 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.765<-17451 Statuses=0009 0009 11:26:48 Msec=0 True Az=109.395 Ze=-81.765 Az status=0009 Ze status=0009 11:26:48 Check angles 11:26:48 SkyScan query 11:26:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.72<-18848 Statuses=0008 0009 11:26:49 Msec=750 True Az=113.01 Ze=-102.72 Az status=0008 Ze status=0009 11:26:49 Check angles 11:26:49 SkyScan query 11:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 11:26:50 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 11:26:50 Check angles 11:26:50 SkyScan query 11:26:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 11:26:50 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 11:26:50 Check angles 11:26:50 SkyScan query 11:26:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 11:26:51 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 11:26:51 Check angles 11:26:51 SkyScan query 11:26:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:26:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:26:52 Message to Master queued w/err=0: serial=8973 error=0 11:26:57 Received message from Master: op=Filter serial=8974 11:26:57 Color wheel filter change from 0 to 0 11:26:57 FLIGetFilterPos err=0 currentPosition=0 11:26:57 FLIGetStepsRemaining err=0 RemainingSteps=0 11:26:57 Filter is already there-color wheel unchanged 11:26:57 Received message from Master: op=Shutter serial=8975 11:26:57 Shutter LASER open 11:26:57 Received message from Camera: op=State serial=8977 11:26:57 GetSingleValue result=40 Value=cccccccc 11:26:57 SkyScan query 11:26:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:26:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:58 Parameters OK 11:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:58 Set A/D data flow result=40 11:26:58 Set A/D channel type result=40 11:26:58 Set A/D encoding result=40 11:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:58 Set channel filter=0.000000e+000 result=40 11:26:58 Config A/D Result=40 11:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:58 Get A/D filter: -9.255963e+061 result=40 11:26:58 Get A/D value=-858993460 result=40 11:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:26:58 Parameters OK 11:26:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:26:58 Set A/D data flow result=40 11:26:58 Set A/D channel type result=40 11:26:58 Set A/D encoding result=40 11:26:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:26:58 Set channel filter=0.000000e+000 result=40 11:26:58 Config A/D Result=40 11:26:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:26:58 Get A/D filter: -9.255963e+061 result=40 11:26:58 Get A/D value=-858993460 result=40 11:26:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:26:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:26:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:26:58 Aux= 11:26:58 Message to Camera, serial 8977 queued 11:27:00 Received message from Master: op=Shutter serial=8981 11:27:00 Shutter LASER close 11:27:01 Received message from Master: op=PointingHead serial=8985 11:27:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:27:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:27:01 Point started: ret=0 11:27:01 point_skyscan result=0 11:27:02 Check angles 11:27:02 SkyScan query 11:27:02 SkyScan query done: ret=0 az=90.18<-6012 ze=157.47<-1502 Statuses=0009 0009 11:27:02 Msec=0 True Az=90.18 Ze=157.47 Az status=0009 Ze status=0009 11:27:02 Check angles 11:27:02 SkyScan query 11:27:03 SkyScan query done: ret=0 az=72.36<-4824 ze=136.095<-2927 Statuses=0009 0009 11:27:03 Msec=750 True Az=72.36 Ze=136.095 Az status=0009 Ze status=0009 11:27:03 Check angles 11:27:03 SkyScan query 11:27:04 SkyScan query done: ret=0 az=54.75<-3650 ze=115.14<-4324 Statuses=0009 0009 11:27:04 Msec=1500 True Az=54.75 Ze=115.14 Az status=0009 Ze status=0009 11:27:04 Check angles 11:27:04 SkyScan query 11:27:05 SkyScan query done: ret=0 az=40.98<-2732 ze=94.155<-5723 Statuses=0009 0009 11:27:05 Msec=2250 True Az=40.98 Ze=94.155 Az status=0009 Ze status=0009 11:27:05 Check angles 11:27:05 SkyScan query 11:27:05 SkyScan query done: ret=0 az=41.01<-2734 ze=73.215<-7119 Statuses=0008 0009 11:27:05 Msec=3000 True Az=41.01 Ze=73.215 Az status=0008 Ze status=0009 11:27:05 Check angles 11:27:05 SkyScan query 11:27:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.71<-8486 Statuses=0008 0009 11:27:06 Msec=3750 True Az=40.995 Ze=52.71 Az status=0008 Ze status=0009 11:27:06 Check angles 11:27:06 SkyScan query 11:27:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:27:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:27:07 Message to Master queued w/err=0: serial=8985 error=0 11:27:12 Received message from Master: op=Filter serial=8986 11:27:12 Color wheel filter change from 0 to 0 11:27:12 FLIGetFilterPos err=0 currentPosition=0 11:27:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:12 Filter is already there-color wheel unchanged 11:27:12 Received message from Master: op=Shutter serial=8987 11:27:12 Shutter LASER close 11:27:12 Received message from Camera: op=State serial=8989 11:27:12 GetSingleValue result=40 Value=cccccccc 11:27:12 SkyScan query 11:27:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:27:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:13 Parameters OK 11:27:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:13 Set A/D data flow result=40 11:27:13 Set A/D channel type result=40 11:27:13 Set A/D encoding result=40 11:27:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:13 Set channel filter=0.000000e+000 result=40 11:27:13 Config A/D Result=40 11:27:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:13 Get A/D filter: -9.255963e+061 result=40 11:27:13 Get A/D value=-858993460 result=40 11:27:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:13 Parameters OK 11:27:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:13 Set A/D data flow result=40 11:27:13 Set A/D channel type result=40 11:27:13 Set A/D encoding result=40 11:27:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:13 Set channel filter=0.000000e+000 result=40 11:27:13 Config A/D Result=40 11:27:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:13 Get A/D filter: -9.255963e+061 result=40 11:27:13 Get A/D value=-858993460 result=40 11:27:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:13 Aux= 11:27:13 Message to Camera, serial 8989 queued 11:27:44 Received message from Master: op=PointingHead serial=8996 11:27:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:27:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:27:44 Point started: ret=0 11:27:44 point_skyscan result=0 11:27:45 Check angles 11:27:45 SkyScan query 11:27:45 SkyScan query done: ret=0 az=64.035<-4269 ze=66.54<-7564 Statuses=0009 0008 11:27:45 Msec=0 True Az=64.035 Ze=66.54 Az status=0009 Ze status=0008 11:27:45 Check angles 11:27:45 SkyScan query 11:27:46 SkyScan query done: ret=0 az=81.6<-5440 ze=66.495<-7567 Statuses=0009 0008 11:27:46 Msec=750 True Az=81.6 Ze=66.495 Az status=0009 Ze status=0008 11:27:46 Check angles 11:27:46 SkyScan query 11:27:47 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 11:27:47 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 11:27:47 Check angles 11:27:47 SkyScan query 11:27:47 SkyScan query done: ret=0 az=116.655<-7777 ze=66.495<-7567 Statuses=0009 0008 11:27:47 Msec=2250 True Az=116.655 Ze=66.495 Az status=0009 Ze status=0008 11:27:48 Check angles 11:27:48 SkyScan query 11:27:48 SkyScan query done: ret=0 az=134.055<-8937 ze=66.495<-7567 Statuses=0009 0008 11:27:48 Msec=3000 True Az=134.055 Ze=66.495 Az status=0009 Ze status=0008 11:27:48 Check angles 11:27:48 SkyScan query 11:27:49 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 11:27:49 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 11:27:49 Check angles 11:27:49 SkyScan query 11:27:50 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 11:27:50 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 11:27:50 Message to Master queued w/err=0: serial=8996 error=0 11:27:55 Received message from Master: op=Filter serial=8997 11:27:55 Color wheel filter change from 0 to 0 11:27:55 FLIGetFilterPos err=0 currentPosition=0 11:27:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:27:55 Filter is already there-color wheel unchanged 11:27:55 Received message from Master: op=Shutter serial=8998 11:27:55 Shutter LASER close 11:27:55 Received message from Camera: op=State serial=9000 11:27:55 GetSingleValue result=40 Value=cccccccc 11:27:55 SkyScan query 11:27:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:27:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:56 Parameters OK 11:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:56 Set A/D data flow result=40 11:27:56 Set A/D channel type result=40 11:27:56 Set A/D encoding result=40 11:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:56 Set channel filter=0.000000e+000 result=40 11:27:56 Config A/D Result=40 11:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:56 Get A/D filter: -9.255963e+061 result=40 11:27:56 Get A/D value=-858993460 result=40 11:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:27:56 Parameters OK 11:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:27:56 Set A/D data flow result=40 11:27:56 Set A/D channel type result=40 11:27:56 Set A/D encoding result=40 11:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:27:56 Set channel filter=0.000000e+000 result=40 11:27:56 Config A/D Result=40 11:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:27:56 Get A/D filter: -9.255963e+061 result=40 11:27:56 Get A/D value=-858993460 result=40 11:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:27:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:27:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:27:56 Aux= 11:27:56 Message to Camera, serial 9000 queued 11:28:26 Received message from Master: op=PointingHead serial=9007 11:28:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:28:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:28:27 Point started: ret=0 11:28:27 point_skyscan result=0 11:28:28 Check angles 11:28:28 SkyScan query 11:28:28 SkyScan query done: ret=0 az=135.18<-9012 ze=36.9<-9540 Statuses=0009 0009 11:28:28 Msec=0 True Az=135.18 Ze=36.9 Az status=0009 Ze status=0009 11:28:28 Check angles 11:28:28 SkyScan query 11:28:29 SkyScan query done: ret=0 az=117.27<-7818 ze=15.51<-10966 Statuses=0009 0009 11:28:29 Msec=750 True Az=117.27 Ze=15.51 Az status=0009 Ze status=0009 11:28:29 Check angles 11:28:29 SkyScan query 11:28:30 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.475<-12365 Statuses=0009 0009 11:28:30 Msec=1500 True Az=99.9 Ze=-5.475 Az status=0009 Ze status=0009 11:28:30 Check angles 11:28:30 SkyScan query 11:28:30 SkyScan query done: ret=0 az=82.335<-5489 ze=-26.43<-13762 Statuses=0009 0009 11:28:30 Msec=2250 True Az=82.335 Ze=-26.43 Az status=0009 Ze status=0009 11:28:31 Check angles 11:28:31 SkyScan query 11:28:31 SkyScan query done: ret=0 az=64.545<-4303 ze=-38.565<-14571 Statuses=0009 0008 11:28:31 Msec=3000 True Az=64.545 Ze=-38.565 Az status=0009 Ze status=0008 11:28:31 Check angles 11:28:31 SkyScan query 11:28:32 SkyScan query done: ret=0 az=47.085<-3139 ze=-38.52<-14568 Statuses=0009 0008 11:28:32 Msec=3750 True Az=47.085 Ze=-38.52 Az status=0009 Ze status=0008 11:28:32 Check angles 11:28:32 SkyScan query 11:28:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:28:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:28:33 Message to Master queued w/err=0: serial=9007 error=0 11:28:38 Received message from Master: op=Filter serial=9008 11:28:38 Color wheel filter change from 0 to 0 11:28:38 FLIGetFilterPos err=0 currentPosition=0 11:28:38 FLIGetStepsRemaining err=0 RemainingSteps=0 11:28:38 Filter is already there-color wheel unchanged 11:28:38 Received message from Master: op=Shutter serial=9009 11:28:38 Shutter LASER close 11:28:38 Received message from Camera: op=State serial=9011 11:28:38 GetSingleValue result=40 Value=cccccccc 11:28:38 SkyScan query 11:28:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:28:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:38 Parameters OK 11:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:38 Set A/D data flow result=40 11:28:38 Set A/D channel type result=40 11:28:38 Set A/D encoding result=40 11:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:38 Set channel filter=0.000000e+000 result=40 11:28:38 Config A/D Result=40 11:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:38 Get A/D filter: -9.255963e+061 result=40 11:28:38 Get A/D value=-858993460 result=40 11:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:28:38 Parameters OK 11:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:28:38 Set A/D data flow result=40 11:28:38 Set A/D channel type result=40 11:28:38 Set A/D encoding result=40 11:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:28:38 Set channel filter=0.000000e+000 result=40 11:28:38 Config A/D Result=40 11:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:28:38 Get A/D filter: -9.255963e+061 result=40 11:28:38 Get A/D value=-858993460 result=40 11:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:28:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:28:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:28:38 Aux= 11:28:38 Message to Camera, serial 9011 queued 11:29:09 Received message from Master: op=PointingHead serial=9018 11:29:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:29:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:29:10 Point started: ret=0 11:29:10 point_skyscan result=0 11:29:10 Check angles 11:29:10 SkyScan query 11:29:11 SkyScan query done: ret=0 az=63.99<-4266 ze=-68.34<-16556 Statuses=0009 0009 11:29:11 Msec=0 True Az=63.99 Ze=-68.34 Az status=0009 Ze status=0009 11:29:11 Check angles 11:29:11 SkyScan query 11:29:12 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.325<-17955 Statuses=0009 0009 11:29:12 Msec=750 True Az=81.585 Ze=-89.325 Az status=0009 Ze status=0009 11:29:12 Check angles 11:29:12 SkyScan query 11:29:12 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.25<-19350 Statuses=0009 0009 11:29:12 Msec=1500 True Az=99.15 Ze=-110.25 Az status=0009 Ze status=0009 11:29:13 Check angles 11:29:13 SkyScan query 11:29:13 SkyScan query done: ret=0 az=116.49<-7766 ze=-131.205<-20747 Statuses=0009 0009 11:29:13 Msec=2250 True Az=116.49 Ze=-131.205 Az status=0009 Ze status=0009 11:29:13 Check angles 11:29:13 SkyScan query 11:29:14 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 11:29:14 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 11:29:14 Check angles 11:29:14 SkyScan query 11:29:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:29:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:29:15 Message to Master queued w/err=0: serial=9018 error=0 11:29:20 Received message from Master: op=Filter serial=9019 11:29:20 Color wheel filter change from 0 to 0 11:29:20 FLIGetFilterPos err=0 currentPosition=0 11:29:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:20 Filter is already there-color wheel unchanged 11:29:20 Received message from Master: op=Shutter serial=9020 11:29:20 Shutter LASER close 11:29:20 Received message from Camera: op=State serial=9022 11:29:20 GetSingleValue result=40 Value=cccccccc 11:29:20 SkyScan query 11:29:21 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:29:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:21 Parameters OK 11:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:21 Set A/D data flow result=40 11:29:21 Set A/D channel type result=40 11:29:21 Set A/D encoding result=40 11:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:21 Set channel filter=0.000000e+000 result=40 11:29:21 Config A/D Result=40 11:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:21 Get A/D filter: -9.255963e+061 result=40 11:29:21 Get A/D value=-858993460 result=40 11:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:29:21 Parameters OK 11:29:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:29:21 Set A/D data flow result=40 11:29:21 Set A/D channel type result=40 11:29:21 Set A/D encoding result=40 11:29:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:29:21 Set channel filter=0.000000e+000 result=40 11:29:21 Config A/D Result=40 11:29:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:29:21 Get A/D filter: -9.255963e+061 result=40 11:29:21 Get A/D value=-858993460 result=40 [UTC 2018-12-4 11:29:21] 11:29:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:29:21 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:29:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:29:21 Aux= 11:29:21 Message to Camera, serial 9022 queued 11:29:51 Received message from Master: op=PointingHead serial=9029 11:29:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:29:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:29:52 Point started: ret=0 11:29:52 point_skyscan result=0 11:29:52 Check angles 11:29:52 SkyScan query 11:29:53 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.15<-23410 Statuses=0009 0009 11:29:53 Msec=0 True Az=113.025 Ze=-171.15 Az status=0009 Ze status=0009 11:29:53 Check angles 11:29:53 SkyScan query 11:29:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:29:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:29:54 Message to Master queued w/err=0: serial=9029 error=0 11:29:59 Received message from Master: op=Filter serial=9030 11:29:59 Color wheel filter change from 0 to 0 11:29:59 FLIGetFilterPos err=0 currentPosition=0 11:29:59 FLIGetStepsRemaining err=0 RemainingSteps=0 11:29:59 Filter is already there-color wheel unchanged 11:29:59 Received message from Master: op=Shutter serial=9031 11:29:59 Shutter LASER open 11:29:59 Received message from Camera: op=State serial=9033 11:29:59 GetSingleValue result=40 Value=cccccccc 11:29:59 SkyScan query 11:30:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:30:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:00 Parameters OK 11:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:00 Set A/D data flow result=40 11:30:00 Set A/D channel type result=40 11:30:00 Set A/D encoding result=40 11:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:00 Set channel filter=0.000000e+000 result=40 11:30:00 Config A/D Result=40 11:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:00 Get A/D filter: -9.255963e+061 result=40 11:30:00 Get A/D value=-858993460 result=40 11:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:00 Parameters OK 11:30:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:00 Set A/D data flow result=40 11:30:00 Set A/D channel type result=40 11:30:00 Set A/D encoding result=40 11:30:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:00 Set channel filter=0.000000e+000 result=40 11:30:00 Config A/D Result=40 11:30:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:00 Get A/D filter: -9.255963e+061 result=40 11:30:00 Get A/D value=-858993460 result=40 11:30:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:00 Aux= 11:30:00 Message to Camera, serial 9033 queued 11:30:02 Received message from Master: op=Shutter serial=9037 11:30:02 Shutter LASER close 11:30:03 Received message from Master: op=PointingHead serial=9041 11:30:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:30:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:30:03 Point started: ret=0 11:30:03 point_skyscan result=0 11:30:04 Check angles 11:30:04 SkyScan query 11:30:04 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.25<-21550 Statuses=0009 0009 11:30:04 Msec=0 True Az=135.885 Ze=-143.25 Az status=0009 Ze status=0009 11:30:05 Check angles 11:30:05 SkyScan query 11:30:05 SkyScan query done: ret=0 az=153.42<-10228 ze=-122.265<-20151 Statuses=0009 0009 11:30:05 Msec=750 True Az=153.42 Ze=-122.265 Az status=0009 Ze status=0009 11:30:05 Check angles 11:30:05 SkyScan query 11:30:06 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.355<-18757 Statuses=0009 0009 11:30:06 Msec=1500 True Az=170.82 Ze=-101.355 Az status=0009 Ze status=0009 11:30:06 Check angles 11:30:06 SkyScan query 11:30:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.37<-17358 Statuses=0008 0009 11:30:07 Msec=2250 True Az=176.025 Ze=-80.37 Az status=0008 Ze status=0009 11:30:07 Check angles 11:30:07 SkyScan query 11:30:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.415<-15961 Statuses=0008 0009 11:30:07 Msec=3000 True Az=175.995 Ze=-59.415 Az status=0008 Ze status=0009 11:30:08 Check angles 11:30:08 SkyScan query 11:30:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:30:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:30:08 Message to Master queued w/err=0: serial=9041 error=0 11:30:13 Received message from Master: op=Filter serial=9042 11:30:13 Color wheel filter change from 0 to 0 11:30:13 FLIGetFilterPos err=0 currentPosition=0 11:30:13 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:13 Filter is already there-color wheel unchanged 11:30:13 Received message from Master: op=Shutter serial=9043 11:30:13 Shutter LASER close 11:30:14 Received message from Camera: op=State serial=9045 11:30:14 GetSingleValue result=40 Value=cccccccc 11:30:14 SkyScan query 11:30:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:30:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:14 Parameters OK 11:30:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:14 Set A/D data flow result=40 11:30:14 Set A/D channel type result=40 11:30:14 Set A/D encoding result=40 11:30:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:14 Set channel filter=0.000000e+000 result=40 11:30:14 Config A/D Result=40 11:30:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:14 Get A/D filter: -9.255963e+061 result=40 11:30:14 Get A/D value=-858993460 result=40 11:30:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:14 Parameters OK 11:30:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:14 Set A/D data flow result=40 11:30:14 Set A/D channel type result=40 11:30:14 Set A/D encoding result=40 11:30:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:14 Set channel filter=0.000000e+000 result=40 11:30:14 Config A/D Result=40 11:30:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:14 Get A/D filter: -9.255963e+061 result=40 11:30:14 Get A/D value=-858993460 result=40 11:30:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:14 Aux= 11:30:14 Message to Camera, serial 9045 queued 11:30:45 Received message from Master: op=PointingHead serial=9052 11:30:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:30:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:30:45 Point started: ret=0 11:30:45 point_skyscan result=0 11:30:46 Check angles 11:30:46 SkyScan query 11:30:47 SkyScan query done: ret=0 az=153<-10200 ze=-21.915<-13461 Statuses=0009 0009 11:30:47 Msec=0 True Az=153 Ze=-21.915 Az status=0009 Ze status=0009 11:30:47 Check angles 11:30:47 SkyScan query 11:30:47 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.915<-12061 Statuses=0009 0009 11:30:47 Msec=750 True Az=135.465 Ze=-0.915 Az status=0009 Ze status=0009 11:30:48 Check angles 11:30:48 SkyScan query 11:30:48 SkyScan query done: ret=0 az=117.6<-7840 ze=20.43<-10638 Statuses=0009 0009 11:30:48 Msec=1500 True Az=117.6 Ze=20.43 Az status=0009 Ze status=0009 11:30:48 Check angles 11:30:48 SkyScan query 11:30:49 SkyScan query done: ret=0 az=100.29<-6686 ze=41.385<-9241 Statuses=0009 0009 11:30:49 Msec=2250 True Az=100.29 Ze=41.385 Az status=0009 Ze status=0009 11:30:49 Check angles 11:30:49 SkyScan query 11:30:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:30:50 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:30:50 Check angles 11:30:50 SkyScan query 11:30:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:30:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:30:50 Message to Master queued w/err=0: serial=9052 error=0 11:30:55 Received message from Master: op=Filter serial=9053 11:30:55 Color wheel filter change from 0 to 0 11:30:55 FLIGetFilterPos err=0 currentPosition=0 11:30:55 FLIGetStepsRemaining err=0 RemainingSteps=0 11:30:55 Filter is already there-color wheel unchanged 11:30:56 Received message from Master: op=Shutter serial=9054 11:30:56 Shutter LASER close 11:30:56 Received message from Camera: op=State serial=9056 11:30:56 GetSingleValue result=40 Value=cccccccc 11:30:56 SkyScan query 11:30:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:30:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:56 Parameters OK 11:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:56 Set A/D data flow result=40 11:30:56 Set A/D channel type result=40 11:30:56 Set A/D encoding result=40 11:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:56 Set channel filter=0.000000e+000 result=40 11:30:56 Config A/D Result=40 11:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:56 Get A/D filter: -9.255963e+061 result=40 11:30:56 Get A/D value=-858993460 result=40 11:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:30:56 Parameters OK 11:30:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:30:56 Set A/D data flow result=40 11:30:56 Set A/D channel type result=40 11:30:56 Set A/D encoding result=40 11:30:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:30:56 Set channel filter=0.000000e+000 result=40 11:30:56 Config A/D Result=40 11:30:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:30:56 Get A/D filter: -9.255963e+061 result=40 11:30:56 Get A/D value=-858993460 result=40 11:30:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:30:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:30:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:30:56 Aux= 11:30:56 Message to Camera, serial 9056 queued 11:31:27 Received message from Master: op=PointingHead serial=9063 11:31:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:31:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:31:27 Point started: ret=0 11:31:27 point_skyscan result=0 11:31:28 Check angles 11:31:28 SkyScan query 11:31:29 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 11:31:29 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 11:31:29 Check angles 11:31:29 SkyScan query 11:31:29 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 11:31:29 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 11:31:30 Check angles 11:31:30 SkyScan query 11:31:30 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 11:31:30 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 11:31:30 Check angles 11:31:30 SkyScan query 11:31:31 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 11:31:31 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 11:31:31 Check angles 11:31:31 SkyScan query 11:31:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:31:32 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:31:32 Check angles 11:31:32 SkyScan query 11:31:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:31:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:31:32 Message to Master queued w/err=0: serial=9063 error=0 11:31:37 Received message from Master: op=Filter serial=9064 11:31:37 Color wheel filter change from 0 to 0 11:31:37 FLIGetFilterPos err=0 currentPosition=0 11:31:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:31:37 Filter is already there-color wheel unchanged 11:31:38 Received message from Master: op=Shutter serial=9065 11:31:38 Shutter LASER close 11:31:38 Received message from Camera: op=State serial=9067 11:31:38 GetSingleValue result=40 Value=cccccccc 11:31:38 SkyScan query 11:31:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:31:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:38 Parameters OK 11:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:38 Set A/D data flow result=40 11:31:38 Set A/D channel type result=40 11:31:38 Set A/D encoding result=40 11:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:38 Set channel filter=0.000000e+000 result=40 11:31:38 Config A/D Result=40 11:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:38 Get A/D filter: -9.255963e+061 result=40 11:31:38 Get A/D value=-858993460 result=40 11:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:31:38 Parameters OK 11:31:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:31:38 Set A/D data flow result=40 11:31:38 Set A/D channel type result=40 11:31:38 Set A/D encoding result=40 11:31:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:31:38 Set channel filter=0.000000e+000 result=40 11:31:38 Config A/D Result=40 11:31:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:31:38 Get A/D filter: -9.255963e+061 result=40 11:31:38 Get A/D value=-858993460 result=40 11:31:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:31:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:31:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:31:38 Aux= 11:31:38 Message to Camera, serial 9067 queued [UTC 2018-12-4 11:32:09] 11:32:09 Received message from Master: op=PointingHead serial=9074 11:32:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:32:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:32:09 Point started: ret=0 11:32:09 point_skyscan result=0 11:32:10 Check angles 11:32:10 SkyScan query 11:32:11 SkyScan query done: ret=0 az=152.745<-10183 ze=8.34<-11444 Statuses=0009 0009 11:32:11 Msec=0 True Az=152.745 Ze=8.34 Az status=0009 Ze status=0009 11:32:11 Check angles 11:32:11 SkyScan query 11:32:12 SkyScan query done: ret=0 az=134.91<-8994 ze=-13.065<-12871 Statuses=0009 0009 11:32:12 Msec=750 True Az=134.91 Ze=-13.065 Az status=0009 Ze status=0009 11:32:12 Check angles 11:32:12 SkyScan query 11:32:12 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.96<-14264 Statuses=0009 0009 11:32:12 Msec=1500 True Az=117.39 Ze=-33.96 Az status=0009 Ze status=0009 11:32:12 Check angles 11:32:12 SkyScan query 11:32:13 SkyScan query done: ret=0 az=99.99<-6666 ze=-51.555<-15437 Statuses=0009 0009 11:32:13 Msec=2250 True Az=99.99 Ze=-51.555 Az status=0009 Ze status=0009 11:32:13 Check angles 11:32:13 SkyScan query 11:32:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:32:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:32:14 Check angles 11:32:14 SkyScan query 11:32:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:32:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:32:15 Message to Master queued w/err=0: serial=9074 error=0 11:32:20 Received message from Master: op=Filter serial=9075 11:32:20 Color wheel filter change from 0 to 0 11:32:20 FLIGetFilterPos err=0 currentPosition=0 11:32:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:32:20 Filter is already there-color wheel unchanged 11:32:20 Received message from Master: op=Shutter serial=9076 11:32:20 Shutter LASER close 11:32:20 Received message from Camera: op=State serial=9078 11:32:20 GetSingleValue result=40 Value=cccccccc 11:32:20 SkyScan query 11:32:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:32:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:20 Parameters OK 11:32:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:20 Set A/D data flow result=40 11:32:20 Set A/D channel type result=40 11:32:20 Set A/D encoding result=40 11:32:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:20 Set channel filter=0.000000e+000 result=40 11:32:20 Config A/D Result=40 11:32:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:20 Get A/D filter: -9.255963e+061 result=40 11:32:20 Get A/D value=-858993460 result=40 11:32:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:32:20 Parameters OK 11:32:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:32:20 Set A/D data flow result=40 11:32:20 Set A/D channel type result=40 11:32:20 Set A/D encoding result=40 11:32:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:32:20 Set channel filter=0.000000e+000 result=40 11:32:20 Config A/D Result=40 11:32:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:32:20 Get A/D filter: -9.255963e+061 result=40 11:32:20 Get A/D value=-858993460 result=40 11:32:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:32:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:32:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:32:20 Aux= 11:32:20 Message to Camera, serial 9078 queued 11:32:51 Received message from Master: op=PointingHead serial=9085 11:32:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:32:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:32:52 Point started: ret=0 11:32:52 point_skyscan result=0 11:32:52 Check angles 11:32:52 SkyScan query 11:32:53 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.765<-17451 Statuses=0009 0009 11:32:53 Msec=0 True Az=109.38 Ze=-81.765 Az status=0009 Ze status=0009 11:32:53 Check angles 11:32:53 SkyScan query 11:32:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-103.14<-18876 Statuses=0008 0009 11:32:54 Msec=750 True Az=113.01 Ze=-103.14 Az status=0008 Ze status=0009 11:32:54 Check angles 11:32:54 SkyScan query 11:32:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.11<-20274 Statuses=0008 0009 11:32:54 Msec=1500 True Az=113.01 Ze=-124.11 Az status=0008 Ze status=0009 11:32:55 Check angles 11:32:55 SkyScan query 11:32:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.035<-21669 Statuses=0008 0009 11:32:55 Msec=2250 True Az=112.995 Ze=-145.035 Az status=0008 Ze status=0009 11:32:55 Check angles 11:32:55 SkyScan query 11:32:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-166.455<-23097 Statuses=0008 0009 11:32:56 Msec=3000 True Az=113.01 Ze=-166.455 Az status=0008 Ze status=0009 11:32:56 Check angles 11:32:56 SkyScan query 11:32:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:32:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:32:57 Message to Master queued w/err=0: serial=9085 error=0 11:33:02 Received message from Master: op=Filter serial=9086 11:33:02 Color wheel filter change from 0 to 0 11:33:02 FLIGetFilterPos err=0 currentPosition=0 11:33:02 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:02 Filter is already there-color wheel unchanged 11:33:02 Received message from Master: op=Shutter serial=9087 11:33:02 Shutter LASER open 11:33:02 Received message from Camera: op=State serial=9089 11:33:02 GetSingleValue result=40 Value=cccccccc 11:33:02 SkyScan query 11:33:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:33:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:03 Parameters OK 11:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:03 Set A/D data flow result=40 11:33:03 Set A/D channel type result=40 11:33:03 Set A/D encoding result=40 11:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:03 Set channel filter=0.000000e+000 result=40 11:33:03 Config A/D Result=40 11:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:03 Get A/D filter: -9.255963e+061 result=40 11:33:03 Get A/D value=-858993460 result=40 11:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:03 Parameters OK 11:33:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:03 Set A/D data flow result=40 11:33:03 Set A/D channel type result=40 11:33:03 Set A/D encoding result=40 11:33:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:03 Set channel filter=0.000000e+000 result=40 11:33:03 Config A/D Result=40 11:33:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:03 Get A/D filter: -9.255963e+061 result=40 11:33:03 Get A/D value=-858993460 result=40 11:33:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:03 Aux= 11:33:03 Message to Camera, serial 9089 queued 11:33:05 Received message from Master: op=Shutter serial=9093 11:33:05 Shutter LASER close 11:33:05 Received message from Master: op=PointingHead serial=9097 11:33:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:33:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:33:06 Point started: ret=0 11:33:06 point_skyscan result=0 11:33:07 Check angles 11:33:07 SkyScan query 11:33:07 SkyScan query done: ret=0 az=89.94<-5996 ze=157.425<-1505 Statuses=0009 0009 11:33:07 Msec=0 True Az=89.94 Ze=157.425 Az status=0009 Ze status=0009 11:33:07 Check angles 11:33:07 SkyScan query 11:33:08 SkyScan query done: ret=0 az=72.18<-4812 ze=136.02<-2932 Statuses=0009 0009 11:33:08 Msec=750 True Az=72.18 Ze=136.02 Az status=0009 Ze status=0009 11:33:08 Check angles 11:33:08 SkyScan query 11:33:09 SkyScan query done: ret=0 az=54.81<-3654 ze=115.08<-4328 Statuses=0009 0009 11:33:09 Msec=1500 True Az=54.81 Ze=115.08 Az status=0009 Ze status=0009 11:33:09 Check angles 11:33:09 SkyScan query 11:33:09 SkyScan query done: ret=0 az=40.845<-2723 ze=94.11<-5726 Statuses=0009 0009 11:33:09 Msec=2250 True Az=40.845 Ze=94.11 Az status=0009 Ze status=0009 11:33:10 Check angles 11:33:10 SkyScan query 11:33:10 SkyScan query done: ret=0 az=41.01<-2734 ze=73.17<-7122 Statuses=0008 0009 11:33:10 Msec=3000 True Az=41.01 Ze=73.17 Az status=0008 Ze status=0009 11:33:10 Check angles 11:33:10 SkyScan query 11:33:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 11:33:11 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 11:33:11 Check angles 11:33:11 SkyScan query 11:33:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:33:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:33:12 Message to Master queued w/err=0: serial=9097 error=0 11:33:17 Received message from Master: op=Filter serial=9098 11:33:17 Color wheel filter change from 0 to 0 11:33:17 FLIGetFilterPos err=0 currentPosition=0 11:33:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:33:17 Filter is already there-color wheel unchanged 11:33:17 Received message from Master: op=Shutter serial=9099 11:33:17 Shutter LASER close 11:33:17 Received message from Camera: op=State serial=9101 11:33:17 GetSingleValue result=40 Value=cccccccc 11:33:17 SkyScan query 11:33:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:18 Parameters OK 11:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:18 Set A/D data flow result=40 11:33:18 Set A/D channel type result=40 11:33:18 Set A/D encoding result=40 11:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:18 Set channel filter=0.000000e+000 result=40 11:33:18 Config A/D Result=40 11:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:18 Get A/D filter: -9.255963e+061 result=40 11:33:18 Get A/D value=-858993460 result=40 11:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:33:18 Parameters OK 11:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:33:18 Set A/D data flow result=40 11:33:18 Set A/D channel type result=40 11:33:18 Set A/D encoding result=40 11:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:33:18 Set channel filter=0.000000e+000 result=40 11:33:18 Config A/D Result=40 11:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:33:18 Get A/D filter: -9.255963e+061 result=40 11:33:18 Get A/D value=-858993460 result=40 11:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:33:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:33:18 Aux= 11:33:18 Message to Camera, serial 9101 queued 11:33:49 Received message from Master: op=PointingHead serial=9108 11:33:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:33:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:33:49 Point started: ret=0 11:33:49 point_skyscan result=0 11:33:50 Check angles 11:33:50 SkyScan query 11:33:50 SkyScan query done: ret=0 az=64.08<-4272 ze=66.54<-7564 Statuses=0009 0008 11:33:50 Msec=0 True Az=64.08 Ze=66.54 Az status=0009 Ze status=0008 11:33:50 Check angles 11:33:50 SkyScan query 11:33:51 SkyScan query done: ret=0 az=82.035<-5469 ze=66.51<-7566 Statuses=0009 0008 11:33:51 Msec=750 True Az=82.035 Ze=66.51 Az status=0009 Ze status=0008 11:33:51 Check angles 11:33:51 SkyScan query 11:33:52 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 11:33:52 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 11:33:52 Check angles 11:33:52 SkyScan query 11:33:52 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 11:33:52 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 11:33:53 Check angles 11:33:53 SkyScan query 11:33:53 SkyScan query done: ret=0 az=134.52<-8968 ze=66.495<-7567 Statuses=0009 0008 11:33:53 Msec=3000 True Az=134.52 Ze=66.495 Az status=0009 Ze status=0008 11:33:53 Check angles 11:33:53 SkyScan query 11:33:54 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 11:33:54 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 11:33:54 Check angles 11:33:54 SkyScan query 11:33:55 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:33:55 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:33:55 Message to Master queued w/err=0: serial=9108 error=0 11:34:00 Received message from Master: op=Filter serial=9109 11:34:00 Color wheel filter change from 0 to 0 11:34:00 FLIGetFilterPos err=0 currentPosition=0 11:34:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:00 Filter is already there-color wheel unchanged 11:34:00 Received message from Master: op=Shutter serial=9110 11:34:00 Shutter LASER close 11:34:00 Received message from Camera: op=State serial=9112 11:34:00 GetSingleValue result=40 Value=cccccccc 11:34:00 SkyScan query 11:34:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:34:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:01 Parameters OK 11:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:01 Set A/D data flow result=40 11:34:01 Set A/D channel type result=40 11:34:01 Set A/D encoding result=40 11:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:01 Set channel filter=0.000000e+000 result=40 11:34:01 Config A/D Result=40 11:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:01 Get A/D filter: -9.255963e+061 result=40 11:34:01 Get A/D value=-858993460 result=40 11:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:01 Parameters OK 11:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:01 Set A/D data flow result=40 11:34:01 Set A/D channel type result=40 11:34:01 Set A/D encoding result=40 11:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:01 Set channel filter=0.000000e+000 result=40 11:34:01 Config A/D Result=40 11:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:01 Get A/D filter: -9.255963e+061 result=40 11:34:01 Get A/D value=-858993460 result=40 11:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:01 Aux= 11:34:01 Message to Camera, serial 9112 queued 11:34:31 Received message from Master: op=PointingHead serial=9119 11:34:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:34:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:34:32 Point started: ret=0 11:34:32 point_skyscan result=0 11:34:32 Check angles 11:34:32 SkyScan query 11:34:33 SkyScan query done: ret=0 az=134.85<-8990 ze=36.615<-9559 Statuses=0009 0009 11:34:33 Msec=0 True Az=134.85 Ze=36.615 Az status=0009 Ze status=0009 11:34:33 Check angles 11:34:33 SkyScan query 11:34:34 SkyScan query done: ret=0 az=117.48<-7832 ze=15.66<-10956 Statuses=0009 0009 11:34:34 Msec=750 True Az=117.48 Ze=15.66 Az status=0009 Ze status=0009 11:34:34 Check angles 11:34:34 SkyScan query 11:34:35 SkyScan query done: ret=0 az=100.095<-6673 ze=-5.31<-12354 Statuses=0009 0009 11:34:35 Msec=1500 True Az=100.095 Ze=-5.31 Az status=0009 Ze status=0009 11:34:35 Check angles 11:34:35 SkyScan query 11:34:35 SkyScan query done: ret=0 az=82.515<-5501 ze=-26.28<-13752 Statuses=0009 0009 11:34:35 Msec=2250 True Az=82.515 Ze=-26.28 Az status=0009 Ze status=0009 11:34:35 Check angles 11:34:35 SkyScan query 11:34:36 SkyScan query done: ret=0 az=65.085<-4339 ze=-38.565<-14571 Statuses=0009 0008 11:34:36 Msec=3000 True Az=65.085 Ze=-38.565 Az status=0009 Ze status=0008 11:34:36 Check angles 11:34:36 SkyScan query 11:34:37 SkyScan query done: ret=0 az=47.61<-3174 ze=-38.535<-14569 Statuses=0009 0008 11:34:37 Msec=3750 True Az=47.61 Ze=-38.535 Az status=0009 Ze status=0008 11:34:37 Check angles 11:34:37 SkyScan query 11:34:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:34:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:34:38 Message to Master queued w/err=0: serial=9119 error=0 11:34:43 Received message from Master: op=Filter serial=9120 11:34:43 Color wheel filter change from 0 to 0 11:34:43 FLIGetFilterPos err=0 currentPosition=0 11:34:43 FLIGetStepsRemaining err=0 RemainingSteps=0 11:34:43 Filter is already there-color wheel unchanged 11:34:43 Received message from Master: op=Shutter serial=9121 11:34:43 Shutter LASER close 11:34:43 Received message from Camera: op=State serial=9123 11:34:43 GetSingleValue result=40 Value=cccccccc 11:34:43 SkyScan query 11:34:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:43 Parameters OK 11:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:43 Set A/D data flow result=40 11:34:43 Set A/D channel type result=40 11:34:43 Set A/D encoding result=40 11:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:43 Set channel filter=0.000000e+000 result=40 11:34:43 Config A/D Result=40 11:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:43 Get A/D filter: -9.255963e+061 result=40 11:34:43 Get A/D value=-858993460 result=40 11:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:34:43 Parameters OK 11:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:34:43 Set A/D data flow result=40 11:34:43 Set A/D channel type result=40 11:34:43 Set A/D encoding result=40 11:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:34:43 Set channel filter=0.000000e+000 result=40 11:34:43 Config A/D Result=40 11:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:34:43 Get A/D filter: -9.255963e+061 result=40 11:34:43 Get A/D value=-858993460 result=40 11:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:34:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:34:43 Aux= 11:34:43 Message to Camera, serial 9123 queued 11:35:14 Received message from Master: op=PointingHead serial=9130 11:35:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:35:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:35:15 Point started: ret=0 11:35:15 point_skyscan result=0 11:35:15 Check angles 11:35:15 SkyScan query 11:35:16 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.13<-16542 Statuses=0009 0009 11:35:16 Msec=0 True Az=63.78 Ze=-68.13 Az status=0009 Ze status=0009 11:35:16 Check angles 11:35:16 SkyScan query 11:35:17 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.52<-17968 Statuses=0009 0009 11:35:17 Msec=750 True Az=81.825 Ze=-89.52 Az status=0009 Ze status=0009 11:35:17 Check angles 11:35:17 SkyScan query 11:35:17 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.88<-19392 Statuses=0009 0009 11:35:17 Msec=1500 True Az=99.6 Ze=-110.88 Az status=0009 Ze status=0009 11:35:18 Check angles 11:35:18 SkyScan query 11:35:18 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.835<-20789 Statuses=0009 0009 11:35:18 Msec=2250 True Az=116.985 Ze=-131.835 Az status=0009 Ze status=0009 11:35:18 Check angles 11:35:18 SkyScan query 11:35:19 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 11:35:19 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 11:35:19 Check angles 11:35:19 SkyScan query 11:35:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:35:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:35:20 Message to Master queued w/err=0: serial=9130 error=0 11:35:25 Received message from Master: op=Filter serial=9131 11:35:25 Color wheel filter change from 0 to 0 11:35:25 FLIGetFilterPos err=0 currentPosition=0 11:35:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:35:25 Filter is already there-color wheel unchanged 11:35:25 Received message from Master: op=Shutter serial=9132 11:35:25 Shutter LASER close 11:35:25 Received message from Camera: op=State serial=9134 11:35:25 GetSingleValue result=40 Value=cccccccc 11:35:25 SkyScan query 11:35:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:35:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:25 Parameters OK 11:35:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:25 Set A/D data flow result=40 11:35:25 Set A/D channel type result=40 11:35:25 Set A/D encoding result=40 11:35:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:25 Set channel filter=0.000000e+000 result=40 11:35:25 Config A/D Result=40 11:35:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:25 Get A/D filter: -9.255963e+061 result=40 11:35:25 Get A/D value=-858993460 result=40 11:35:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:35:25 Parameters OK 11:35:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:35:25 Set A/D data flow result=40 11:35:25 Set A/D channel type result=40 11:35:25 Set A/D encoding result=40 11:35:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:35:25 Set channel filter=0.000000e+000 result=40 11:35:25 Config A/D Result=40 11:35:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:35:25 Get A/D filter: -9.255963e+061 result=40 11:35:25 Get A/D value=-858993460 result=40 11:35:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:35:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:35:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:35:25 Aux= 11:35:25 Message to Camera, serial 9134 queued 11:35:56 Received message from Master: op=PointingHead serial=9141 11:35:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:35:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:35:57 Point started: ret=0 11:35:57 point_skyscan result=0 11:35:57 Check angles 11:35:57 SkyScan query 11:35:58 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.105<-23407 Statuses=0009 0009 11:35:58 Msec=0 True Az=113.025 Ze=-171.105 Az status=0009 Ze status=0009 11:35:58 Check angles 11:35:58 SkyScan query 11:35:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:35:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:35:59 Message to Master queued w/err=0: serial=9141 error=0 11:36:04 Received message from Master: op=Filter serial=9142 11:36:04 Color wheel filter change from 0 to 0 11:36:04 FLIGetFilterPos err=0 currentPosition=0 11:36:04 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:04 Filter is already there-color wheel unchanged 11:36:04 Received message from Master: op=Shutter serial=9143 11:36:04 Shutter LASER open 11:36:04 Received message from Camera: op=State serial=9145 11:36:04 GetSingleValue result=40 Value=cccccccc 11:36:04 SkyScan query 11:36:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:36:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:05 Parameters OK 11:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:05 Set A/D data flow result=40 11:36:05 Set A/D channel type result=40 11:36:05 Set A/D encoding result=40 11:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:05 Set channel filter=0.000000e+000 result=40 11:36:05 Config A/D Result=40 11:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:05 Get A/D filter: -9.255963e+061 result=40 11:36:05 Get A/D value=-858993460 result=40 11:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:05 Parameters OK 11:36:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:05 Set A/D data flow result=40 11:36:05 Set A/D channel type result=40 11:36:05 Set A/D encoding result=40 11:36:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:05 Set channel filter=0.000000e+000 result=40 11:36:05 Config A/D Result=40 11:36:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:05 Get A/D filter: -9.255963e+061 result=40 11:36:05 Get A/D value=-858993460 result=40 11:36:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:05 Aux= 11:36:05 Message to Camera, serial 9145 queued 11:36:07 Received message from Master: op=Shutter serial=9149 11:36:07 Shutter LASER close 11:36:08 Received message from Master: op=PointingHead serial=9153 11:36:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:36:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:36:08 Point started: ret=0 11:36:08 point_skyscan result=0 11:36:09 Check angles 11:36:09 SkyScan query 11:36:09 SkyScan query done: ret=0 az=135.99<-9066 ze=-143.16<-21544 Statuses=0009 0009 11:36:09 Msec=0 True Az=135.99 Ze=-143.16 Az status=0009 Ze status=0009 11:36:10 Check angles 11:36:10 SkyScan query 11:36:10 SkyScan query done: ret=0 az=153.87<-10258 ze=-121.77<-20118 Statuses=0009 0009 11:36:10 Msec=750 True Az=153.87 Ze=-121.77 Az status=0009 Ze status=0009 11:36:10 Check angles 11:36:10 SkyScan query 11:36:11 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.83<-18722 Statuses=0009 0009 11:36:11 Msec=1500 True Az=171.285 Ze=-100.83 Az status=0009 Ze status=0009 11:36:11 Check angles 11:36:11 SkyScan query 11:36:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.875<-17325 Statuses=0008 0009 11:36:12 Msec=2250 True Az=176.025 Ze=-79.875 Az status=0008 Ze status=0009 11:36:12 Check angles 11:36:12 SkyScan query 11:36:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.47<-15898 Statuses=0008 0009 11:36:12 Msec=3000 True Az=175.995 Ze=-58.47 Az status=0008 Ze status=0009 11:36:13 Check angles 11:36:13 SkyScan query 11:36:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:36:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:36:13 Message to Master queued w/err=0: serial=9153 error=0 11:36:18 Received message from Master: op=Filter serial=9154 11:36:18 Color wheel filter change from 0 to 0 11:36:18 FLIGetFilterPos err=0 currentPosition=0 11:36:18 FLIGetStepsRemaining err=0 RemainingSteps=0 11:36:18 Filter is already there-color wheel unchanged 11:36:18 Received message from Master: op=Shutter serial=9155 11:36:18 Shutter LASER close 11:36:19 Received message from Camera: op=State serial=9157 11:36:19 GetSingleValue result=40 Value=cccccccc 11:36:19 SkyScan query 11:36:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:36:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:19 Parameters OK 11:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:19 Set A/D data flow result=40 11:36:19 Set A/D channel type result=40 11:36:19 Set A/D encoding result=40 11:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:19 Set channel filter=0.000000e+000 result=40 11:36:19 Config A/D Result=40 11:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:19 Get A/D filter: -9.255963e+061 result=40 11:36:19 Get A/D value=-858993460 result=40 11:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:36:19 Parameters OK 11:36:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:36:19 Set A/D data flow result=40 11:36:19 Set A/D channel type result=40 11:36:19 Set A/D encoding result=40 11:36:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:36:19 Set channel filter=0.000000e+000 result=40 11:36:19 Config A/D Result=40 11:36:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:36:19 Get A/D filter: -9.255963e+061 result=40 11:36:19 Get A/D value=-858993460 result=40 11:36:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:36:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:36:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:36:19 Aux= 11:36:19 Message to Camera, serial 9157 queued 11:36:50 Received message from Master: op=PointingHead serial=9164 11:36:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:36:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:36:50 Point started: ret=0 11:36:50 point_skyscan result=0 11:36:51 Check angles 11:36:51 SkyScan query 11:36:52 SkyScan query done: ret=0 az=153.12<-10208 ze=-21.945<-13463 Statuses=0009 0009 11:36:52 Msec=0 True Az=153.12 Ze=-21.945 Az status=0009 Ze status=0009 11:36:52 Check angles 11:36:52 SkyScan query 11:36:52 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.99<-12066 Statuses=0009 0009 11:36:52 Msec=750 True Az=135.735 Ze=-0.99 Az status=0009 Ze status=0009 11:36:53 Check angles 11:36:53 SkyScan query 11:36:53 SkyScan query done: ret=0 az=117.72<-7848 ze=20.4<-10640 Statuses=0009 0009 11:36:53 Msec=1500 True Az=117.72 Ze=20.4 Az status=0009 Ze status=0009 11:36:53 Check angles 11:36:53 SkyScan query 11:36:54 SkyScan query done: ret=0 az=100.44<-6696 ze=41.355<-9243 Statuses=0009 0009 11:36:54 Msec=2250 True Az=100.44 Ze=41.355 Az status=0009 Ze status=0009 11:36:54 Check angles 11:36:54 SkyScan query 11:36:55 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:36:55 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:36:55 Check angles 11:36:55 SkyScan query 11:36:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:36:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:36:55 Message to Master queued w/err=0: serial=9164 error=0 11:37:00 Received message from Master: op=Filter serial=9165 11:37:00 Color wheel filter change from 0 to 0 11:37:00 FLIGetFilterPos err=0 currentPosition=0 11:37:00 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:00 Filter is already there-color wheel unchanged 11:37:01 Received message from Master: op=Shutter serial=9166 11:37:01 Shutter LASER close 11:37:01 Received message from Camera: op=State serial=9168 11:37:01 GetSingleValue result=40 Value=cccccccc 11:37:01 SkyScan query 11:37:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:37:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:01 Parameters OK 11:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:01 Set A/D data flow result=40 11:37:01 Set A/D channel type result=40 11:37:01 Set A/D encoding result=40 11:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:01 Set channel filter=0.000000e+000 result=40 11:37:01 Config A/D Result=40 11:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:01 Get A/D filter: -9.255963e+061 result=40 11:37:01 Get A/D value=-858993460 result=40 11:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:01 Parameters OK 11:37:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:01 Set A/D data flow result=40 11:37:01 Set A/D channel type result=40 11:37:01 Set A/D encoding result=40 11:37:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:01 Set channel filter=0.000000e+000 result=40 11:37:01 Config A/D Result=40 11:37:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:01 Get A/D filter: -9.255963e+061 result=40 11:37:01 Get A/D value=-858993460 result=40 11:37:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:01 Aux= 11:37:01 Message to Camera, serial 9168 queued 11:37:32 Received message from Master: op=PointingHead serial=9175 11:37:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:37:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:37:32 Point started: ret=0 11:37:32 point_skyscan result=0 11:37:33 Check angles 11:37:33 SkyScan query 11:37:34 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 11:37:34 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 11:37:34 Check angles 11:37:34 SkyScan query 11:37:34 SkyScan query done: ret=0 az=126.405<-8427 ze=38.49<-9434 Statuses=0009 0008 11:37:34 Msec=750 True Az=126.405 Ze=38.49 Az status=0009 Ze status=0008 11:37:35 Check angles 11:37:35 SkyScan query 11:37:35 SkyScan query done: ret=0 az=143.745<-9583 ze=38.505<-9433 Statuses=0009 0008 11:37:35 Msec=1500 True Az=143.745 Ze=38.505 Az status=0009 Ze status=0008 11:37:35 Check angles 11:37:35 SkyScan query 11:37:36 SkyScan query done: ret=0 az=161.085<-10739 ze=38.505<-9433 Statuses=0009 0008 11:37:36 Msec=2250 True Az=161.085 Ze=38.505 Az status=0009 Ze status=0008 11:37:36 Check angles 11:37:36 SkyScan query 11:37:37 SkyScan query done: ret=0 az=176.04<-11736 ze=38.505<-9433 Statuses=0009 0008 11:37:37 Msec=3000 True Az=176.04 Ze=38.505 Az status=0009 Ze status=0008 11:37:37 Check angles 11:37:37 SkyScan query 11:37:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:37:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:37:37 Message to Master queued w/err=0: serial=9175 error=0 11:37:42 Received message from Master: op=Filter serial=9176 11:37:42 Color wheel filter change from 0 to 0 11:37:42 FLIGetFilterPos err=0 currentPosition=0 11:37:42 FLIGetStepsRemaining err=0 RemainingSteps=0 11:37:42 Filter is already there-color wheel unchanged 11:37:43 Received message from Master: op=Shutter serial=9177 11:37:43 Shutter LASER close 11:37:43 Received message from Camera: op=State serial=9179 11:37:43 GetSingleValue result=40 Value=cccccccc 11:37:43 SkyScan query 11:37:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:37:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:43 Parameters OK 11:37:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:43 Set A/D data flow result=40 11:37:43 Set A/D channel type result=40 11:37:43 Set A/D encoding result=40 11:37:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:43 Set channel filter=0.000000e+000 result=40 11:37:43 Config A/D Result=40 11:37:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:43 Get A/D filter: -9.255963e+061 result=40 11:37:43 Get A/D value=-858993460 result=40 11:37:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:37:43 Parameters OK 11:37:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:37:43 Set A/D data flow result=40 11:37:43 Set A/D channel type result=40 11:37:43 Set A/D encoding result=40 11:37:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:37:43 Set channel filter=0.000000e+000 result=40 11:37:43 Config A/D Result=40 11:37:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:37:43 Get A/D filter: -9.255963e+061 result=40 11:37:43 Get A/D value=-858993460 result=40 11:37:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:37:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:37:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:37:43 Aux= 11:37:43 Message to Camera, serial 9179 queued 11:38:14 Received message from Master: op=PointingHead serial=9186 11:38:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:38:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:38:14 Point started: ret=0 11:38:14 point_skyscan result=0 11:38:15 Check angles 11:38:15 SkyScan query 11:38:16 SkyScan query done: ret=0 az=152.985<-10199 ze=8.715<-11419 Statuses=0009 0009 11:38:16 Msec=0 True Az=152.985 Ze=8.715 Az status=0009 Ze status=0009 11:38:16 Check angles 11:38:16 SkyScan query 11:38:17 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.21<-12814 Statuses=0009 0009 11:38:17 Msec=750 True Az=135.615 Ze=-12.21 Az status=0009 Ze status=0009 11:38:17 Check angles 11:38:17 SkyScan query 11:38:17 SkyScan query done: ret=0 az=118.065<-7871 ze=-33.18<-14212 Statuses=0009 0009 11:38:17 Msec=1500 True Az=118.065 Ze=-33.18 Az status=0009 Ze status=0009 11:38:17 Check angles 11:38:17 SkyScan query 11:38:18 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.525<-15435 Statuses=0009 0009 11:38:18 Msec=2250 True Az=100.635 Ze=-51.525 Az status=0009 Ze status=0009 11:38:18 Check angles 11:38:18 SkyScan query 11:38:19 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:38:19 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:38:19 Check angles 11:38:19 SkyScan query 11:38:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:38:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:38:20 Message to Master queued w/err=0: serial=9186 error=0 11:38:25 Received message from Master: op=Filter serial=9187 11:38:25 Color wheel filter change from 0 to 0 11:38:25 FLIGetFilterPos err=0 currentPosition=0 11:38:25 FLIGetStepsRemaining err=0 RemainingSteps=0 11:38:25 Filter is already there-color wheel unchanged 11:38:25 Received message from Master: op=Shutter serial=9188 11:38:25 Shutter LASER close 11:38:25 Received message from Camera: op=State serial=9190 11:38:25 GetSingleValue result=40 Value=cccccccc 11:38:25 SkyScan query 11:38:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:38:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:25 Parameters OK 11:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:25 Set A/D data flow result=40 11:38:25 Set A/D channel type result=40 11:38:25 Set A/D encoding result=40 11:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:25 Set channel filter=0.000000e+000 result=40 11:38:25 Config A/D Result=40 11:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:25 Get A/D filter: -9.255963e+061 result=40 11:38:25 Get A/D value=-858993460 result=40 11:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:38:25 Parameters OK 11:38:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:38:25 Set A/D data flow result=40 11:38:25 Set A/D channel type result=40 11:38:25 Set A/D encoding result=40 11:38:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:38:25 Set channel filter=0.000000e+000 result=40 11:38:25 Config A/D Result=40 11:38:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:38:25 Get A/D filter: -9.255963e+061 result=40 11:38:25 Get A/D value=-858993460 result=40 11:38:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:38:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:38:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:38:25 Aux= 11:38:25 Message to Camera, serial 9190 queued 11:38:56 Received message from Master: op=PointingHead serial=9197 11:38:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:38:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:38:56 Point started: ret=0 11:38:57 point_skyscan result=0 11:38:57 Check angles 11:38:57 SkyScan query 11:38:58 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.84<-17456 Statuses=0009 0009 11:38:58 Msec=0 True Az=109.425 Ze=-81.84 Az status=0009 Ze status=0009 11:38:58 Check angles 11:38:58 SkyScan query 11:38:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.795<-18853 Statuses=0008 0009 11:38:59 Msec=750 True Az=113.01 Ze=-102.795 Az status=0008 Ze status=0009 11:38:59 Check angles 11:38:59 SkyScan query 11:38:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.72<-20248 Statuses=0008 0009 11:38:59 Msec=1500 True Az=113.01 Ze=-123.72 Az status=0008 Ze status=0009 11:39:00 Check angles 11:39:00 SkyScan query 11:39:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 11:39:00 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 11:39:00 Check angles 11:39:00 SkyScan query 11:39:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 11:39:01 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 11:39:01 Check angles 11:39:01 SkyScan query 11:39:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:39:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:39:02 Message to Master queued w/err=0: serial=9197 error=0 11:39:07 Received message from Master: op=Filter serial=9198 11:39:07 Color wheel filter change from 0 to 0 11:39:07 FLIGetFilterPos err=0 currentPosition=0 11:39:07 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:07 Filter is already there-color wheel unchanged 11:39:07 Received message from Master: op=Shutter serial=9199 11:39:07 Shutter LASER open 11:39:07 Received message from Camera: op=State serial=9201 11:39:07 GetSingleValue result=40 Value=cccccccc 11:39:07 SkyScan query 11:39:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:39:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:08 Parameters OK 11:39:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:08 Set A/D data flow result=40 11:39:08 Set A/D channel type result=40 11:39:08 Set A/D encoding result=40 11:39:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:08 Set channel filter=0.000000e+000 result=40 11:39:08 Config A/D Result=40 11:39:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:08 Get A/D filter: -9.255963e+061 result=40 11:39:08 Get A/D value=-858993460 result=40 11:39:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:08 Parameters OK 11:39:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:08 Set A/D data flow result=40 11:39:08 Set A/D channel type result=40 11:39:08 Set A/D encoding result=40 11:39:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:08 Set channel filter=0.000000e+000 result=40 11:39:08 Config A/D Result=40 11:39:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:08 Get A/D filter: -9.255963e+061 result=40 11:39:08 Get A/D value=-858993460 result=40 11:39:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:08 Aux= 11:39:08 Message to Camera, serial 9201 queued 11:39:10 Received message from Master: op=Shutter serial=9205 11:39:10 Shutter LASER close 11:39:10 Received message from Master: op=PointingHead serial=9209 11:39:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:39:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:39:11 Point started: ret=0 11:39:11 point_skyscan result=0 11:39:12 Check angles 11:39:12 SkyScan query 11:39:12 SkyScan query done: ret=0 az=89.475<-5965 ze=156.705<-1553 Statuses=0009 0009 11:39:12 Msec=0 True Az=89.475 Ze=156.705 Az status=0009 Ze status=0009 11:39:12 Check angles 11:39:12 SkyScan query 11:39:13 SkyScan query done: ret=0 az=72.06<-4804 ze=135.75<-2950 Statuses=0009 0009 11:39:13 Msec=750 True Az=72.06 Ze=135.75 Az status=0009 Ze status=0009 11:39:13 Check angles 11:39:13 SkyScan query 11:39:14 SkyScan query done: ret=0 az=54.69<-3646 ze=114.795<-4347 Statuses=0009 0009 11:39:14 Msec=1500 True Az=54.69 Ze=114.795 Az status=0009 Ze status=0009 11:39:14 Check angles 11:39:14 SkyScan query 11:39:14 SkyScan query done: ret=0 az=40.95<-2730 ze=93.84<-5744 Statuses=0009 0009 11:39:14 Msec=2250 True Az=40.95 Ze=93.84 Az status=0009 Ze status=0009 11:39:15 Check angles 11:39:15 SkyScan query 11:39:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 11:39:15 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 11:39:15 Check angles 11:39:15 SkyScan query 11:39:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 11:39:16 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 11:39:16 Check angles 11:39:16 SkyScan query 11:39:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:39:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:39:17 Message to Master queued w/err=0: serial=9209 error=0 11:39:22 Received message from Master: op=Filter serial=9210 11:39:22 Color wheel filter change from 0 to 0 11:39:22 FLIGetFilterPos err=0 currentPosition=0 11:39:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:39:22 Filter is already there-color wheel unchanged 11:39:22 Received message from Master: op=Shutter serial=9211 11:39:22 Shutter LASER close 11:39:22 Received message from Camera: op=State serial=9213 11:39:22 GetSingleValue result=40 Value=cccccccc 11:39:22 SkyScan query 11:39:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:39:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:23 Parameters OK 11:39:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:23 Set A/D data flow result=40 11:39:23 Set A/D channel type result=40 11:39:23 Set A/D encoding result=40 11:39:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:23 Set channel filter=0.000000e+000 result=40 11:39:23 Config A/D Result=40 11:39:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:23 Get A/D filter: -9.255963e+061 result=40 11:39:23 Get A/D value=-858993460 result=40 11:39:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:39:23 Parameters OK 11:39:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:39:23 Set A/D data flow result=40 11:39:23 Set A/D channel type result=40 11:39:23 Set A/D encoding result=40 11:39:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:39:23 Set channel filter=0.000000e+000 result=40 11:39:23 Config A/D Result=40 11:39:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:39:23 Get A/D filter: -9.255963e+061 result=40 11:39:23 Get A/D value=-858993460 result=40 11:39:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:39:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:39:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:39:23 Aux= 11:39:23 Message to Camera, serial 9213 queued 11:39:53 Received message from Master: op=PointingHead serial=9220 11:39:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:39:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:39:54 Point started: ret=0 11:39:54 point_skyscan result=0 11:39:55 Check angles 11:39:55 SkyScan query 11:39:55 SkyScan query done: ret=0 az=63.84<-4256 ze=66.54<-7564 Statuses=0009 0008 11:39:55 Msec=0 True Az=63.84 Ze=66.54 Az status=0009 Ze status=0008 11:39:55 Check angles 11:39:55 SkyScan query 11:39:56 SkyScan query done: ret=0 az=81.225<-5415 ze=66.51<-7566 Statuses=0009 0008 11:39:56 Msec=750 True Az=81.225 Ze=66.51 Az status=0009 Ze status=0008 11:39:56 Check angles 11:39:56 SkyScan query 11:39:57 SkyScan query done: ret=0 az=99.015<-6601 ze=66.495<-7567 Statuses=0009 0008 11:39:57 Msec=1500 True Az=99.015 Ze=66.495 Az status=0009 Ze status=0008 11:39:57 Check angles 11:39:57 SkyScan query 11:39:57 SkyScan query done: ret=0 az=116.4<-7760 ze=66.495<-7567 Statuses=0009 0008 11:39:57 Msec=2250 True Az=116.4 Ze=66.495 Az status=0009 Ze status=0008 11:39:58 Check angles 11:39:58 SkyScan query 11:39:58 SkyScan query done: ret=0 az=133.74<-8916 ze=66.495<-7567 Statuses=0009 0008 11:39:58 Msec=3000 True Az=133.74 Ze=66.495 Az status=0009 Ze status=0008 11:39:58 Check angles 11:39:58 SkyScan query 11:39:59 SkyScan query done: ret=0 az=151.2<-10080 ze=66.495<-7567 Statuses=0009 0008 11:39:59 Msec=3750 True Az=151.2 Ze=66.495 Az status=0009 Ze status=0008 11:39:59 Check angles 11:39:59 SkyScan query 11:40:00 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:40:00 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:40:00 Message to Master queued w/err=0: serial=9220 error=0 11:40:05 Received message from Master: op=Filter serial=9221 11:40:05 Color wheel filter change from 0 to 0 11:40:05 FLIGetFilterPos err=0 currentPosition=0 11:40:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:05 Filter is already there-color wheel unchanged 11:40:05 Received message from Master: op=Shutter serial=9222 11:40:05 Shutter LASER close 11:40:05 Received message from Camera: op=State serial=9224 11:40:05 GetSingleValue result=40 Value=cccccccc 11:40:05 SkyScan query 11:40:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:40:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:05 Parameters OK 11:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:05 Set A/D data flow result=40 11:40:05 Set A/D channel type result=40 11:40:05 Set A/D encoding result=40 11:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:05 Set channel filter=0.000000e+000 result=40 11:40:05 Config A/D Result=40 11:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:05 Get A/D filter: -9.255963e+061 result=40 11:40:05 Get A/D value=-858993460 result=40 11:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:05 Parameters OK 11:40:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:05 Set A/D data flow result=40 11:40:05 Set A/D channel type result=40 11:40:05 Set A/D encoding result=40 11:40:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:05 Set channel filter=0.000000e+000 result=40 11:40:05 Config A/D Result=40 11:40:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:05 Get A/D filter: -9.255963e+061 result=40 11:40:05 Get A/D value=-858993460 result=40 [UTC 2018-12-4 11:40:05] 11:40:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:05 Aux= 11:40:05 Message to Camera, serial 9224 queued 11:40:36 Received message from Master: op=PointingHead serial=9231 11:40:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:40:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:40:37 Point started: ret=0 11:40:37 point_skyscan result=0 11:40:37 Check angles 11:40:37 SkyScan query 11:40:38 SkyScan query done: ret=0 az=134.865<-8991 ze=36.615<-9559 Statuses=0009 0009 11:40:38 Msec=0 True Az=134.865 Ze=36.615 Az status=0009 Ze status=0009 11:40:38 Check angles 11:40:38 SkyScan query 11:40:39 SkyScan query done: ret=0 az=117.3<-7820 ze=15.675<-10955 Statuses=0009 0009 11:40:39 Msec=750 True Az=117.3 Ze=15.675 Az status=0009 Ze status=0009 11:40:39 Check angles 11:40:39 SkyScan query 11:40:39 SkyScan query done: ret=0 az=100.08<-6672 ze=-5.295<-12353 Statuses=0009 0009 11:40:39 Msec=1500 True Az=100.08 Ze=-5.295 Az status=0009 Ze status=0009 11:40:40 Check angles 11:40:40 SkyScan query 11:40:40 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.265<-13751 Statuses=0009 0009 11:40:40 Msec=2250 True Az=82.455 Ze=-26.265 Az status=0009 Ze status=0009 11:40:40 Check angles 11:40:40 SkyScan query 11:40:41 SkyScan query done: ret=0 az=65.04<-4336 ze=-38.565<-14571 Statuses=0009 0008 11:40:41 Msec=3000 True Az=65.04 Ze=-38.565 Az status=0009 Ze status=0008 11:40:41 Check angles 11:40:41 SkyScan query 11:40:42 SkyScan query done: ret=0 az=47.595<-3173 ze=-38.52<-14568 Statuses=0009 0008 11:40:42 Msec=3750 True Az=47.595 Ze=-38.52 Az status=0009 Ze status=0008 11:40:42 Check angles 11:40:42 SkyScan query 11:40:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:40:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:40:42 Message to Master queued w/err=0: serial=9231 error=0 11:40:47 Received message from Master: op=Filter serial=9232 11:40:47 Color wheel filter change from 0 to 0 11:40:47 FLIGetFilterPos err=0 currentPosition=0 11:40:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:40:47 Filter is already there-color wheel unchanged 11:40:48 Received message from Master: op=Shutter serial=9233 11:40:48 Shutter LASER close 11:40:48 Received message from Camera: op=State serial=9235 11:40:48 GetSingleValue result=40 Value=cccccccc 11:40:48 SkyScan query 11:40:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:40:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:48 Parameters OK 11:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:48 Set A/D data flow result=40 11:40:48 Set A/D channel type result=40 11:40:48 Set A/D encoding result=40 11:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:48 Set channel filter=0.000000e+000 result=40 11:40:48 Config A/D Result=40 11:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:48 Get A/D filter: -9.255963e+061 result=40 11:40:48 Get A/D value=-858993460 result=40 11:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:40:48 Parameters OK 11:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:40:48 Set A/D data flow result=40 11:40:48 Set A/D channel type result=40 11:40:48 Set A/D encoding result=40 11:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:40:48 Set channel filter=0.000000e+000 result=40 11:40:48 Config A/D Result=40 11:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:40:48 Get A/D filter: -9.255963e+061 result=40 11:40:48 Get A/D value=-858993460 result=40 11:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:40:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:40:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:40:48 Aux= 11:40:48 Message to Camera, serial 9235 queued 11:41:19 Received message from Master: op=PointingHead serial=9242 11:41:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:41:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:41:19 Point started: ret=0 11:41:19 point_skyscan result=0 11:41:20 Check angles 11:41:20 SkyScan query 11:41:21 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.325<-16555 Statuses=0009 0009 11:41:21 Msec=0 True Az=63.96 Ze=-68.325 Az status=0009 Ze status=0009 11:41:21 Check angles 11:41:21 SkyScan query 11:41:21 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.295<-17953 Statuses=0009 0009 11:41:21 Msec=750 True Az=81.645 Ze=-89.295 Az status=0009 Ze status=0009 11:41:22 Check angles 11:41:22 SkyScan query 11:41:22 SkyScan query done: ret=0 az=99.375<-6625 ze=-110.685<-19379 Statuses=0009 0009 11:41:22 Msec=1500 True Az=99.375 Ze=-110.685 Az status=0009 Ze status=0009 11:41:22 Check angles 11:41:22 SkyScan query 11:41:23 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.075<-20805 Statuses=0009 0009 11:41:23 Msec=2250 True Az=117.18 Ze=-132.075 Az status=0009 Ze status=0009 11:41:23 Check angles 11:41:23 SkyScan query 11:41:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0009 0008 11:41:24 Msec=3000 True Az=131.01 Ze=-141.525 Az status=0009 Ze status=0008 11:41:24 Check angles 11:41:24 SkyScan query 11:41:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 11:41:25 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 11:41:25 Message to Master queued w/err=0: serial=9242 error=0 11:41:30 Received message from Master: op=Filter serial=9243 11:41:30 Color wheel filter change from 0 to 0 11:41:30 FLIGetFilterPos err=0 currentPosition=0 11:41:30 FLIGetStepsRemaining err=0 RemainingSteps=0 11:41:30 Filter is already there-color wheel unchanged 11:41:30 Received message from Master: op=Shutter serial=9244 11:41:30 Shutter LASER close 11:41:30 Received message from Camera: op=State serial=9246 11:41:30 GetSingleValue result=40 Value=cccccccc 11:41:30 SkyScan query 11:41:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:41:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:30 Parameters OK 11:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:30 Set A/D data flow result=40 11:41:30 Set A/D channel type result=40 11:41:30 Set A/D encoding result=40 11:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:30 Set channel filter=0.000000e+000 result=40 11:41:30 Config A/D Result=40 11:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:30 Get A/D filter: -9.255963e+061 result=40 11:41:30 Get A/D value=-858993460 result=40 11:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:41:30 Parameters OK 11:41:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:41:30 Set A/D data flow result=40 11:41:30 Set A/D channel type result=40 11:41:30 Set A/D encoding result=40 11:41:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:41:30 Set channel filter=0.000000e+000 result=40 11:41:30 Config A/D Result=40 11:41:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:41:30 Get A/D filter: -9.255963e+061 result=40 11:41:30 Get A/D value=-858993460 result=40 11:41:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:41:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:41:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:41:30 Aux= 11:41:30 Message to Camera, serial 9246 queued 11:42:01 Received message from Master: op=PointingHead serial=9253 11:42:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:42:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:42:02 Point started: ret=0 11:42:02 point_skyscan result=0 11:42:02 Check angles 11:42:02 SkyScan query 11:42:03 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.12<-23408 Statuses=0009 0009 11:42:03 Msec=0 True Az=113.025 Ze=-171.12 Az status=0009 Ze status=0009 11:42:03 Check angles 11:42:03 SkyScan query 11:42:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:42:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:42:04 Message to Master queued w/err=0: serial=9253 error=0 11:42:09 Received message from Master: op=Filter serial=9254 11:42:09 Color wheel filter change from 0 to 0 11:42:09 FLIGetFilterPos err=0 currentPosition=0 11:42:09 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:09 Filter is already there-color wheel unchanged 11:42:09 Received message from Master: op=Shutter serial=9255 11:42:09 Shutter LASER open 11:42:09 Received message from Camera: op=State serial=9257 11:42:09 GetSingleValue result=40 Value=cccccccc 11:42:09 SkyScan query 11:42:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:42:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:10 Parameters OK 11:42:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:10 Set A/D data flow result=40 11:42:10 Set A/D channel type result=40 11:42:10 Set A/D encoding result=40 11:42:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:10 Set channel filter=0.000000e+000 result=40 11:42:10 Config A/D Result=40 11:42:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:10 Get A/D filter: -9.255963e+061 result=40 11:42:10 Get A/D value=-858993460 result=40 11:42:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:10 Parameters OK 11:42:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:10 Set A/D data flow result=40 11:42:10 Set A/D channel type result=40 11:42:10 Set A/D encoding result=40 11:42:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:10 Set channel filter=0.000000e+000 result=40 11:42:10 Config A/D Result=40 11:42:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:10 Get A/D filter: -9.255963e+061 result=40 11:42:10 Get A/D value=-858993460 result=40 11:42:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:10 Aux= 11:42:10 Message to Camera, serial 9257 queued 11:42:12 Received message from Master: op=Shutter serial=9261 11:42:12 Shutter LASER close 11:42:13 Received message from Master: op=PointingHead serial=9265 11:42:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:42:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:42:13 Point started: ret=0 11:42:13 point_skyscan result=0 11:42:14 Check angles 11:42:14 SkyScan query 11:42:14 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.04<-21536 Statuses=0009 0009 11:42:14 Msec=0 True Az=136.17 Ze=-143.04 Az status=0009 Ze status=0009 11:42:14 Check angles 11:42:14 SkyScan query 11:42:15 SkyScan query done: ret=0 az=153.945<-10263 ze=-121.665<-20111 Statuses=0009 0009 11:42:15 Msec=750 True Az=153.945 Ze=-121.665 Az status=0009 Ze status=0009 11:42:15 Check angles 11:42:15 SkyScan query 11:42:16 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.68<-18712 Statuses=0009 0009 11:42:16 Msec=1500 True Az=171.45 Ze=-100.68 Az status=0009 Ze status=0009 11:42:16 Check angles 11:42:16 SkyScan query 11:42:16 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.755<-17317 Statuses=0008 0009 11:42:16 Msec=2250 True Az=176.025 Ze=-79.755 Az status=0008 Ze status=0009 11:42:17 Check angles 11:42:17 SkyScan query 11:42:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.8<-15920 Statuses=0008 0009 11:42:17 Msec=3000 True Az=175.995 Ze=-58.8 Az status=0008 Ze status=0009 11:42:17 Check angles 11:42:17 SkyScan query 11:42:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 11:42:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 11:42:18 Message to Master queued w/err=0: serial=9265 error=0 11:42:23 Received message from Master: op=Filter serial=9266 11:42:23 Color wheel filter change from 0 to 0 11:42:23 FLIGetFilterPos err=0 currentPosition=0 11:42:23 FLIGetStepsRemaining err=0 RemainingSteps=0 11:42:23 Filter is already there-color wheel unchanged 11:42:23 Received message from Master: op=Shutter serial=9267 11:42:23 Shutter LASER close 11:42:23 Received message from Camera: op=State serial=9269 11:42:23 GetSingleValue result=40 Value=cccccccc 11:42:23 SkyScan query 11:42:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:42:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:24 Parameters OK 11:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:24 Set A/D data flow result=40 11:42:24 Set A/D channel type result=40 11:42:24 Set A/D encoding result=40 11:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:24 Set channel filter=0.000000e+000 result=40 11:42:24 Config A/D Result=40 11:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:24 Get A/D filter: -9.255963e+061 result=40 11:42:24 Get A/D value=-858993460 result=40 11:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:42:24 Parameters OK 11:42:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:42:24 Set A/D data flow result=40 11:42:24 Set A/D channel type result=40 11:42:24 Set A/D encoding result=40 11:42:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:42:24 Set channel filter=0.000000e+000 result=40 11:42:24 Config A/D Result=40 11:42:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:42:24 Get A/D filter: -9.255963e+061 result=40 11:42:24 Get A/D value=-858993460 result=40 11:42:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:42:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:42:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:42:24 Aux= 11:42:24 Message to Camera, serial 9269 queued 11:42:55 Received message from Master: op=PointingHead serial=9276 11:42:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:42:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:42:55 Point started: ret=0 11:42:55 point_skyscan result=0 11:42:56 Check angles 11:42:56 SkyScan query 11:42:56 SkyScan query done: ret=0 az=153.15<-10210 ze=-21.93<-13462 Statuses=0009 0009 11:42:56 Msec=0 True Az=153.15 Ze=-21.93 Az status=0009 Ze status=0009 11:42:57 Check angles 11:42:57 SkyScan query 11:42:57 SkyScan query done: ret=0 az=135.72<-9048 ze=-0.975<-12065 Statuses=0009 0009 11:42:57 Msec=750 True Az=135.72 Ze=-0.975 Az status=0009 Ze status=0009 11:42:57 Check angles 11:42:57 SkyScan query 11:42:58 SkyScan query done: ret=0 az=118.185<-7879 ze=19.98<-10668 Statuses=0009 0009 11:42:58 Msec=1500 True Az=118.185 Ze=19.98 Az status=0009 Ze status=0009 11:42:58 Check angles 11:42:58 SkyScan query 11:42:59 SkyScan query done: ret=0 az=100.305<-6687 ze=41.37<-9242 Statuses=0009 0009 11:42:59 Msec=2250 True Az=100.305 Ze=41.37 Az status=0009 Ze status=0009 11:42:59 Check angles 11:42:59 SkyScan query 11:42:59 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:42:59 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:43:00 Check angles 11:43:00 SkyScan query 11:43:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:43:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:43:00 Message to Master queued w/err=0: serial=9276 error=0 11:43:05 Received message from Master: op=Filter serial=9277 11:43:05 Color wheel filter change from 0 to 0 11:43:05 FLIGetFilterPos err=0 currentPosition=0 11:43:05 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:05 Filter is already there-color wheel unchanged 11:43:05 Received message from Master: op=Shutter serial=9278 11:43:05 Shutter LASER close 11:43:05 Received message from Camera: op=State serial=9280 11:43:05 GetSingleValue result=40 Value=cccccccc 11:43:05 SkyScan query 11:43:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:43:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:06 Parameters OK 11:43:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:06 Set A/D data flow result=40 11:43:06 Set A/D channel type result=40 11:43:06 Set A/D encoding result=40 11:43:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:06 Set channel filter=0.000000e+000 result=40 11:43:06 Config A/D Result=40 11:43:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:06 Get A/D filter: -9.255963e+061 result=40 11:43:06 Get A/D value=-858993460 result=40 11:43:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:06 Parameters OK 11:43:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:06 Set A/D data flow result=40 11:43:06 Set A/D channel type result=40 11:43:06 Set A/D encoding result=40 11:43:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:06 Set channel filter=0.000000e+000 result=40 11:43:06 Config A/D Result=40 11:43:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:06 Get A/D filter: -9.255963e+061 result=40 11:43:06 Get A/D value=-858993460 result=40 11:43:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:06 Aux= 11:43:06 Message to Camera, serial 9280 queued 11:43:37 Received message from Master: op=PointingHead serial=9287 11:43:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:43:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:43:37 Point started: ret=0 11:43:37 point_skyscan result=0 11:43:38 Check angles 11:43:38 SkyScan query 11:43:39 SkyScan query done: ret=0 az=109.23<-7282 ze=38.49<-9434 Statuses=0009 0008 11:43:39 Msec=0 True Az=109.23 Ze=38.49 Az status=0009 Ze status=0008 11:43:39 Check angles 11:43:39 SkyScan query 11:43:39 SkyScan query done: ret=0 az=126.69<-8446 ze=38.49<-9434 Statuses=0009 0008 11:43:39 Msec=750 True Az=126.69 Ze=38.49 Az status=0009 Ze status=0008 11:43:39 Check angles 11:43:39 SkyScan query 11:43:40 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 11:43:40 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 11:43:40 Check angles 11:43:40 SkyScan query 11:43:41 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 11:43:41 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 11:43:41 Check angles 11:43:41 SkyScan query 11:43:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:43:42 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:43:42 Check angles 11:43:42 SkyScan query 11:43:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:43:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:43:42 Message to Master queued w/err=0: serial=9287 error=0 11:43:47 Received message from Master: op=Filter serial=9288 11:43:47 Color wheel filter change from 0 to 0 11:43:47 FLIGetFilterPos err=0 currentPosition=0 11:43:47 FLIGetStepsRemaining err=0 RemainingSteps=0 11:43:47 Filter is already there-color wheel unchanged 11:43:47 Received message from Master: op=Shutter serial=9289 11:43:47 Shutter LASER close 11:43:48 Received message from Camera: op=State serial=9291 11:43:48 GetSingleValue result=40 Value=cccccccc 11:43:48 SkyScan query 11:43:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:43:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:48 Parameters OK 11:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:48 Set A/D data flow result=40 11:43:48 Set A/D channel type result=40 11:43:48 Set A/D encoding result=40 11:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:48 Set channel filter=0.000000e+000 result=40 11:43:48 Config A/D Result=40 11:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:48 Get A/D filter: -9.255963e+061 result=40 11:43:48 Get A/D value=-858993460 result=40 11:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:43:48 Parameters OK 11:43:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:43:48 Set A/D data flow result=40 11:43:48 Set A/D channel type result=40 11:43:48 Set A/D encoding result=40 11:43:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:43:48 Set channel filter=0.000000e+000 result=40 11:43:48 Config A/D Result=40 11:43:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:43:48 Get A/D filter: -9.255963e+061 result=40 11:43:48 Get A/D value=-858993460 result=40 11:43:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:43:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:43:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:43:48 Aux= 11:43:48 Message to Camera, serial 9291 queued 11:44:19 Received message from Master: op=PointingHead serial=9298 11:44:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:44:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:44:19 Point started: ret=0 11:44:19 point_skyscan result=0 11:44:20 Check angles 11:44:20 SkyScan query 11:44:21 SkyScan query done: ret=0 az=153.195<-10213 ze=8.895<-11407 Statuses=0009 0009 11:44:21 Msec=0 True Az=153.195 Ze=8.895 Az status=0009 Ze status=0009 11:44:21 Check angles 11:44:21 SkyScan query 11:44:21 SkyScan query done: ret=0 az=135.735<-9049 ze=-12.045<-12803 Statuses=0009 0009 11:44:21 Msec=750 True Az=135.735 Ze=-12.045 Az status=0009 Ze status=0009 11:44:22 Check angles 11:44:22 SkyScan query 11:44:22 SkyScan query done: ret=0 az=118.2<-7880 ze=-33<-14200 Statuses=0009 0009 11:44:22 Msec=1500 True Az=118.2 Ze=-33 Az status=0009 Ze status=0009 11:44:22 Check angles 11:44:22 SkyScan query 11:44:23 SkyScan query done: ret=0 az=100.83<-6722 ze=-51.495<-15433 Statuses=0009 0009 11:44:23 Msec=2250 True Az=100.83 Ze=-51.495 Az status=0009 Ze status=0009 11:44:23 Check angles 11:44:23 SkyScan query 11:44:24 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:44:24 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:44:24 Check angles 11:44:24 SkyScan query 11:44:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:44:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:44:24 Message to Master queued w/err=0: serial=9298 error=0 11:44:29 Received message from Master: op=Filter serial=9299 11:44:29 Color wheel filter change from 0 to 0 11:44:29 FLIGetFilterPos err=0 currentPosition=0 11:44:29 FLIGetStepsRemaining err=0 RemainingSteps=0 11:44:29 Filter is already there-color wheel unchanged 11:44:30 Received message from Master: op=Shutter serial=9300 11:44:30 Shutter LASER close 11:44:30 Received message from Camera: op=State serial=9302 11:44:30 GetSingleValue result=40 Value=cccccccc 11:44:30 SkyScan query 11:44:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:44:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:30 Parameters OK 11:44:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:30 Set A/D data flow result=40 11:44:30 Set A/D channel type result=40 11:44:30 Set A/D encoding result=40 11:44:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:30 Set channel filter=0.000000e+000 result=40 11:44:30 Config A/D Result=40 11:44:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:30 Get A/D filter: -9.255963e+061 result=40 11:44:30 Get A/D value=-858993460 result=40 11:44:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:44:30 Parameters OK 11:44:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:44:30 Set A/D data flow result=40 11:44:30 Set A/D channel type result=40 11:44:30 Set A/D encoding result=40 11:44:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:44:30 Set channel filter=0.000000e+000 result=40 11:44:30 Config A/D Result=40 11:44:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:44:30 Get A/D filter: -9.255963e+061 result=40 11:44:30 Get A/D value=-858993460 result=40 11:44:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:44:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:44:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:44:30 Aux= 11:44:30 Message to Camera, serial 9302 queued 11:45:01 Received message from Master: op=PointingHead serial=9309 11:45:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:45:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:45:01 Point started: ret=0 11:45:01 point_skyscan result=0 11:45:02 Check angles 11:45:02 SkyScan query 11:45:03 SkyScan query done: ret=0 az=108.99<-7266 ze=-81.315<-17421 Statuses=0009 0009 11:45:03 Msec=0 True Az=108.99 Ze=-81.315 Az status=0009 Ze status=0009 11:45:03 Check angles 11:45:03 SkyScan query 11:45:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.27<-18818 Statuses=0008 0009 11:45:03 Msec=750 True Az=113.01 Ze=-102.27 Az status=0008 Ze status=0009 11:45:04 Check angles 11:45:04 SkyScan query 11:45:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 11:45:04 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 11:45:04 Check angles 11:45:04 SkyScan query 11:45:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 11:45:05 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 11:45:05 Check angles 11:45:05 SkyScan query 11:45:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 11:45:06 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 11:45:06 Check angles 11:45:06 SkyScan query 11:45:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:45:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:45:07 Message to Master queued w/err=0: serial=9309 error=0 11:45:12 Received message from Master: op=Filter serial=9310 11:45:12 Color wheel filter change from 0 to 0 11:45:12 FLIGetFilterPos err=0 currentPosition=0 11:45:12 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:12 Filter is already there-color wheel unchanged 11:45:12 Received message from Master: op=Shutter serial=9311 11:45:12 Shutter LASER open 11:45:12 Received message from Camera: op=State serial=9313 11:45:12 GetSingleValue result=40 Value=cccccccc 11:45:12 SkyScan query 11:45:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:45:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:12 Parameters OK 11:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:12 Set A/D data flow result=40 11:45:12 Set A/D channel type result=40 11:45:12 Set A/D encoding result=40 11:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:12 Set channel filter=0.000000e+000 result=40 11:45:12 Config A/D Result=40 11:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:12 Get A/D filter: -9.255963e+061 result=40 11:45:12 Get A/D value=-858993460 result=40 11:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:12 Parameters OK 11:45:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:12 Set A/D data flow result=40 11:45:12 Set A/D channel type result=40 11:45:12 Set A/D encoding result=40 11:45:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:12 Set channel filter=0.000000e+000 result=40 11:45:12 Config A/D Result=40 11:45:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:12 Get A/D filter: -9.255963e+061 result=40 11:45:12 Get A/D value=-858993460 result=40 11:45:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:12 Aux= 11:45:12 Message to Camera, serial 9313 queued 11:45:15 Received message from Master: op=Shutter serial=9317 11:45:15 Shutter LASER close 11:45:15 Received message from Master: op=PointingHead serial=9321 11:45:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:45:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:45:16 Point started: ret=0 11:45:16 point_skyscan result=0 11:45:16 Check angles 11:45:16 SkyScan query 11:45:17 SkyScan query done: ret=0 az=89.94<-5996 ze=157.29<-1514 Statuses=0009 0009 11:45:17 Msec=0 True Az=89.94 Ze=157.29 Az status=0009 Ze status=0009 11:45:17 Check angles 11:45:17 SkyScan query 11:45:18 SkyScan query done: ret=0 az=72.435<-4829 ze=136.335<-2911 Statuses=0009 0009 11:45:18 Msec=750 True Az=72.435 Ze=136.335 Az status=0009 Ze status=0009 11:45:18 Check angles 11:45:18 SkyScan query 11:45:19 SkyScan query done: ret=0 az=54.705<-3647 ze=114.945<-4337 Statuses=0009 0009 11:45:19 Msec=1500 True Az=54.705 Ze=114.945 Az status=0009 Ze status=0009 11:45:19 Check angles 11:45:19 SkyScan query 11:45:19 SkyScan query done: ret=0 az=40.905<-2727 ze=93.555<-5763 Statuses=0009 0009 11:45:19 Msec=2250 True Az=40.905 Ze=93.555 Az status=0009 Ze status=0009 11:45:19 Check angles 11:45:19 SkyScan query 11:45:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.6<-7160 Statuses=0008 0009 11:45:20 Msec=3000 True Az=40.995 Ze=72.6 Az status=0008 Ze status=0009 11:45:20 Check angles 11:45:20 SkyScan query 11:45:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.35<-8510 Statuses=0008 0009 11:45:21 Msec=3750 True Az=40.995 Ze=52.35 Az status=0008 Ze status=0009 11:45:21 Check angles 11:45:21 SkyScan query 11:45:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:45:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:45:22 Message to Master queued w/err=0: serial=9321 error=0 11:45:27 Received message from Master: op=Filter serial=9322 11:45:27 Color wheel filter change from 0 to 0 11:45:27 FLIGetFilterPos err=0 currentPosition=0 11:45:27 FLIGetStepsRemaining err=0 RemainingSteps=0 11:45:27 Filter is already there-color wheel unchanged 11:45:27 Received message from Master: op=Shutter serial=9323 11:45:27 Shutter LASER close 11:45:27 Received message from Camera: op=State serial=9325 11:45:27 GetSingleValue result=40 Value=cccccccc 11:45:27 SkyScan query 11:45:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:45:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:28 Parameters OK 11:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:28 Set A/D data flow result=40 11:45:28 Set A/D channel type result=40 11:45:28 Set A/D encoding result=40 11:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:28 Set channel filter=0.000000e+000 result=40 11:45:28 Config A/D Result=40 11:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:28 Get A/D filter: -9.255963e+061 result=40 11:45:28 Get A/D value=-858993460 result=40 11:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:45:28 Parameters OK 11:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:45:28 Set A/D data flow result=40 11:45:28 Set A/D channel type result=40 11:45:28 Set A/D encoding result=40 11:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:45:28 Set channel filter=0.000000e+000 result=40 11:45:28 Config A/D Result=40 11:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:45:28 Get A/D filter: -9.255963e+061 result=40 11:45:28 Get A/D value=-858993460 result=40 11:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:45:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:45:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:45:28 Aux= 11:45:28 Message to Camera, serial 9325 queued 11:45:58 Received message from Master: op=PointingHead serial=9332 11:45:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:45:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:45:59 Point started: ret=0 11:45:59 point_skyscan result=0 11:46:00 Check angles 11:46:00 SkyScan query 11:46:00 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 11:46:00 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 11:46:00 Check angles 11:46:00 SkyScan query 11:46:01 SkyScan query done: ret=0 az=81.48<-5432 ze=66.495<-7567 Statuses=0009 0008 11:46:01 Msec=750 True Az=81.48 Ze=66.495 Az status=0009 Ze status=0008 11:46:01 Check angles 11:46:01 SkyScan query 11:46:02 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 11:46:02 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 11:46:02 Check angles 11:46:02 SkyScan query 11:46:02 SkyScan query done: ret=0 az=116.52<-7768 ze=66.495<-7567 Statuses=0009 0008 11:46:02 Msec=2250 True Az=116.52 Ze=66.495 Az status=0009 Ze status=0008 11:46:03 Check angles 11:46:03 SkyScan query 11:46:03 SkyScan query done: ret=0 az=133.98<-8932 ze=66.495<-7567 Statuses=0009 0008 11:46:03 Msec=3000 True Az=133.98 Ze=66.495 Az status=0009 Ze status=0008 11:46:03 Check angles 11:46:03 SkyScan query 11:46:04 SkyScan query done: ret=0 az=151.35<-10090 ze=66.495<-7567 Statuses=0009 0008 11:46:04 Msec=3750 True Az=151.35 Ze=66.495 Az status=0009 Ze status=0008 11:46:04 Check angles 11:46:04 SkyScan query 11:46:05 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:46:05 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:46:05 Message to Master queued w/err=0: serial=9332 error=0 11:46:10 Received message from Master: op=Filter serial=9333 11:46:10 Color wheel filter change from 0 to 0 11:46:10 FLIGetFilterPos err=0 currentPosition=0 11:46:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:10 Filter is already there-color wheel unchanged 11:46:10 Received message from Master: op=Shutter serial=9334 11:46:10 Shutter LASER close 11:46:10 Received message from Camera: op=State serial=9336 11:46:10 GetSingleValue result=40 Value=cccccccc 11:46:10 SkyScan query 11:46:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:46:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:11 Parameters OK 11:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:11 Set A/D data flow result=40 11:46:11 Set A/D channel type result=40 11:46:11 Set A/D encoding result=40 11:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:11 Set channel filter=0.000000e+000 result=40 11:46:11 Config A/D Result=40 11:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:11 Get A/D filter: -9.255963e+061 result=40 11:46:11 Get A/D value=-858993460 result=40 11:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:11 Parameters OK 11:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:11 Set A/D data flow result=40 11:46:11 Set A/D channel type result=40 11:46:11 Set A/D encoding result=40 11:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:11 Set channel filter=0.000000e+000 result=40 11:46:11 Config A/D Result=40 11:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:11 Get A/D filter: -9.255963e+061 result=40 11:46:11 Get A/D value=-858993460 result=40 11:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:11 Aux= 11:46:11 Message to Camera, serial 9336 queued 11:46:41 Received message from Master: op=PointingHead serial=9343 11:46:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:46:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:46:42 Point started: ret=0 11:46:42 point_skyscan result=0 11:46:43 Check angles 11:46:43 SkyScan query 11:46:43 SkyScan query done: ret=0 az=134.895<-8993 ze=36.645<-9557 Statuses=0009 0009 11:46:43 Msec=0 True Az=134.895 Ze=36.645 Az status=0009 Ze status=0009 11:46:43 Check angles 11:46:43 SkyScan query 11:46:44 SkyScan query done: ret=0 az=117.33<-7822 ze=15.705<-10953 Statuses=0009 0009 11:46:44 Msec=750 True Az=117.33 Ze=15.705 Az status=0009 Ze status=0009 11:46:44 Check angles 11:46:44 SkyScan query 11:46:45 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.265<-12351 Statuses=0009 0009 11:46:45 Msec=1500 True Az=99.945 Ze=-5.265 Az status=0009 Ze status=0009 11:46:45 Check angles 11:46:45 SkyScan query 11:46:45 SkyScan query done: ret=0 az=82.455<-5497 ze=-26.235<-13749 Statuses=0009 0009 11:46:45 Msec=2250 True Az=82.455 Ze=-26.235 Az status=0009 Ze status=0009 11:46:46 Check angles 11:46:46 SkyScan query 11:46:46 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 11:46:46 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 11:46:46 Check angles 11:46:46 SkyScan query 11:46:47 SkyScan query done: ret=0 az=47.13<-3142 ze=-38.535<-14569 Statuses=0009 0008 11:46:47 Msec=3750 True Az=47.13 Ze=-38.535 Az status=0009 Ze status=0008 11:46:47 Check angles 11:46:47 SkyScan query 11:46:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:46:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:46:48 Message to Master queued w/err=0: serial=9343 error=0 11:46:53 Received message from Master: op=Filter serial=9344 11:46:53 Color wheel filter change from 0 to 0 11:46:53 FLIGetFilterPos err=0 currentPosition=0 11:46:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:46:53 Filter is already there-color wheel unchanged 11:46:53 Received message from Master: op=Shutter serial=9345 11:46:53 Shutter LASER close 11:46:53 Received message from Camera: op=State serial=9347 11:46:53 GetSingleValue result=40 Value=cccccccc 11:46:53 SkyScan query 11:46:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:46:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:53 Parameters OK 11:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:53 Set A/D data flow result=40 11:46:53 Set A/D channel type result=40 11:46:53 Set A/D encoding result=40 11:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:53 Set channel filter=0.000000e+000 result=40 11:46:53 Config A/D Result=40 11:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:53 Get A/D filter: -9.255963e+061 result=40 11:46:53 Get A/D value=-858993460 result=40 11:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:46:53 Parameters OK 11:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:46:53 Set A/D data flow result=40 11:46:53 Set A/D channel type result=40 11:46:53 Set A/D encoding result=40 11:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:46:53 Set channel filter=0.000000e+000 result=40 11:46:53 Config A/D Result=40 11:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:46:53 Get A/D filter: -9.255963e+061 result=40 11:46:53 Get A/D value=-858993460 result=40 11:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:46:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:46:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:46:53 Aux= 11:46:53 Message to Camera, serial 9347 queued 11:47:24 Received message from Master: op=PointingHead serial=9354 11:47:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:47:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:47:25 Point started: ret=0 11:47:25 point_skyscan result=0 11:47:25 Check angles 11:47:25 SkyScan query 11:47:26 SkyScan query done: ret=0 az=64.155<-4277 ze=-68.685<-16579 Statuses=0009 0009 11:47:26 Msec=0 True Az=64.155 Ze=-68.685 Az status=0009 Ze status=0009 11:47:26 Check angles 11:47:26 SkyScan query 11:47:27 SkyScan query done: ret=0 az=82.32<-5488 ze=-90.075<-18005 Statuses=0009 0009 11:47:27 Msec=750 True Az=82.32 Ze=-90.075 Az status=0009 Ze status=0009 11:47:27 Check angles 11:47:27 SkyScan query 11:47:28 SkyScan query done: ret=0 az=99.735<-6649 ze=-111.015<-19401 Statuses=0009 0009 11:47:28 Msec=1500 True Az=99.735 Ze=-111.015 Az status=0009 Ze status=0009 11:47:28 Check angles 11:47:28 SkyScan query 11:47:28 SkyScan query done: ret=0 az=117.105<-7807 ze=-131.97<-20798 Statuses=0009 0009 11:47:28 Msec=2250 True Az=117.105 Ze=-131.97 Az status=0009 Ze status=0009 11:47:28 Check angles 11:47:28 SkyScan query 11:47:29 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.525<-21435 Statuses=0009 0008 11:47:29 Msec=3000 True Az=130.98 Ze=-141.525 Az status=0009 Ze status=0008 11:47:29 Check angles 11:47:29 SkyScan query 11:47:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 11:47:30 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 11:47:30 Message to Master queued w/err=0: serial=9354 error=0 11:47:35 Received message from Master: op=Filter serial=9355 11:47:35 Color wheel filter change from 0 to 0 11:47:35 FLIGetFilterPos err=0 currentPosition=0 11:47:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:47:35 Filter is already there-color wheel unchanged 11:47:35 Received message from Master: op=Shutter serial=9356 11:47:35 Shutter LASER close 11:47:35 Received message from Camera: op=State serial=9358 11:47:35 GetSingleValue result=40 Value=cccccccc 11:47:35 SkyScan query 11:47:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:47:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:36 Parameters OK 11:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:36 Set A/D data flow result=40 11:47:36 Set A/D channel type result=40 11:47:36 Set A/D encoding result=40 11:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:36 Set channel filter=0.000000e+000 result=40 11:47:36 Config A/D Result=40 11:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:36 Get A/D filter: -9.255963e+061 result=40 11:47:36 Get A/D value=-858993460 result=40 11:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:47:36 Parameters OK 11:47:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:47:36 Set A/D data flow result=40 11:47:36 Set A/D channel type result=40 11:47:36 Set A/D encoding result=40 11:47:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:47:36 Set channel filter=0.000000e+000 result=40 11:47:36 Config A/D Result=40 11:47:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:47:36 Get A/D filter: -9.255963e+061 result=40 11:47:36 Get A/D value=-858993460 result=40 11:47:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:47:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:47:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:47:36 Aux= 11:47:36 Message to Camera, serial 9358 queued 11:48:06 Received message from Master: op=PointingHead serial=9365 11:48:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:48:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:48:07 Point started: ret=0 11:48:07 point_skyscan result=0 11:48:08 Check angles 11:48:08 SkyScan query 11:48:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.465<-23431 Statuses=0009 0009 11:48:08 Msec=0 True Az=113.01 Ze=-171.465 Az status=0009 Ze status=0009 11:48:08 Check angles 11:48:08 SkyScan query 11:48:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:48:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:48:09 Message to Master queued w/err=0: serial=9365 error=0 11:48:14 Received message from Master: op=Filter serial=9366 11:48:14 Color wheel filter change from 0 to 0 11:48:14 FLIGetFilterPos err=0 currentPosition=0 11:48:14 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:14 Filter is already there-color wheel unchanged 11:48:14 Received message from Master: op=Shutter serial=9367 11:48:14 Shutter LASER open 11:48:14 Received message from Camera: op=State serial=9369 11:48:14 GetSingleValue result=40 Value=cccccccc 11:48:14 SkyScan query 11:48:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:48:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:15 Parameters OK 11:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:15 Set A/D data flow result=40 11:48:15 Set A/D channel type result=40 11:48:15 Set A/D encoding result=40 11:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:15 Set channel filter=0.000000e+000 result=40 11:48:15 Config A/D Result=40 11:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:15 Get A/D filter: -9.255963e+061 result=40 11:48:15 Get A/D value=-858993460 result=40 11:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:15 Parameters OK 11:48:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:15 Set A/D data flow result=40 11:48:15 Set A/D channel type result=40 11:48:15 Set A/D encoding result=40 11:48:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:15 Set channel filter=0.000000e+000 result=40 11:48:15 Config A/D Result=40 11:48:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:15 Get A/D filter: -9.255963e+061 result=40 11:48:15 Get A/D value=-858993460 result=40 11:48:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:15 Aux= 11:48:15 Message to Camera, serial 9369 queued 11:48:17 Received message from Master: op=Shutter serial=9373 11:48:17 Shutter LASER close 11:48:18 Received message from Master: op=PointingHead serial=9377 11:48:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:48:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:48:18 Point started: ret=0 11:48:18 point_skyscan result=0 11:48:19 Check angles 11:48:19 SkyScan query 11:48:19 SkyScan query done: ret=0 az=135.81<-9054 ze=-143.325<-21555 Statuses=0009 0009 11:48:19 Msec=0 True Az=135.81 Ze=-143.325 Az status=0009 Ze status=0009 11:48:20 Check angles 11:48:20 SkyScan query 11:48:20 SkyScan query done: ret=0 az=153.405<-10227 ze=-122.37<-20158 Statuses=0009 0009 11:48:20 Msec=750 True Az=153.405 Ze=-122.37 Az status=0009 Ze status=0009 11:48:20 Check angles 11:48:20 SkyScan query 11:48:21 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.445<-18763 Statuses=0009 0009 11:48:21 Msec=1500 True Az=170.73 Ze=-101.445 Az status=0009 Ze status=0009 11:48:21 Check angles 11:48:21 SkyScan query 11:48:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.475<-17365 Statuses=0008 0009 11:48:22 Msec=2250 True Az=176.025 Ze=-80.475 Az status=0008 Ze status=0009 11:48:22 Check angles 11:48:22 SkyScan query 11:48:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.1<-15940 Statuses=0008 0009 11:48:22 Msec=3000 True Az=175.995 Ze=-59.1 Az status=0008 Ze status=0009 11:48:23 Check angles 11:48:23 SkyScan query 11:48:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:48:23 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:48:23 Message to Master queued w/err=0: serial=9377 error=0 11:48:28 Received message from Master: op=Filter serial=9378 11:48:28 Color wheel filter change from 0 to 0 11:48:28 FLIGetFilterPos err=0 currentPosition=0 11:48:28 FLIGetStepsRemaining err=0 RemainingSteps=0 11:48:28 Filter is already there-color wheel unchanged 11:48:28 Received message from Master: op=Shutter serial=9379 11:48:28 Shutter LASER close 11:48:29 Received message from Camera: op=State serial=9381 11:48:29 GetSingleValue result=40 Value=cccccccc 11:48:29 SkyScan query 11:48:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:48:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:29 Parameters OK 11:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:29 Set A/D data flow result=40 11:48:29 Set A/D channel type result=40 11:48:29 Set A/D encoding result=40 11:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:29 Set channel filter=0.000000e+000 result=40 11:48:29 Config A/D Result=40 11:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:29 Get A/D filter: -9.255963e+061 result=40 11:48:29 Get A/D value=-858993460 result=40 11:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:48:29 Parameters OK 11:48:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:48:29 Set A/D data flow result=40 11:48:29 Set A/D channel type result=40 11:48:29 Set A/D encoding result=40 11:48:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:48:29 Set channel filter=0.000000e+000 result=40 11:48:29 Config A/D Result=40 11:48:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:48:29 Get A/D filter: -9.255963e+061 result=40 11:48:29 Get A/D value=-858993460 result=40 11:48:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:48:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:48:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:48:29 Aux= 11:48:29 Message to Camera, serial 9381 queued 11:49:00 Received message from Master: op=PointingHead serial=9388 11:49:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:49:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:49:00 Point started: ret=0 11:49:00 point_skyscan result=0 11:49:01 Check angles 11:49:01 SkyScan query 11:49:02 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.96<-13464 Statuses=0009 0009 11:49:02 Msec=0 True Az=153.105 Ze=-21.96 Az status=0009 Ze status=0009 11:49:02 Check angles [UTC 2018-12-4 11:49:02] 11:49:02 SkyScan query 11:49:02 SkyScan query done: ret=0 az=133.695<-8913 ze=1.185<-11921 Statuses=0009 0009 11:49:02 Msec=750 True Az=133.695 Ze=1.185 Az status=0009 Ze status=0009 11:49:03 Check angles 11:49:03 SkyScan query 11:49:03 SkyScan query done: ret=0 az=117.765<-7851 ze=20.385<-10641 Statuses=0009 0009 11:49:03 Msec=1500 True Az=117.765 Ze=20.385 Az status=0009 Ze status=0009 11:49:03 Check angles 11:49:03 SkyScan query 11:49:04 SkyScan query done: ret=0 az=100.38<-6692 ze=41.355<-9243 Statuses=0009 0009 11:49:04 Msec=2250 True Az=100.38 Ze=41.355 Az status=0009 Ze status=0009 11:49:04 Check angles 11:49:04 SkyScan query 11:49:05 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 11:49:05 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 11:49:05 Check angles 11:49:05 SkyScan query 11:49:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:49:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:49:05 Message to Master queued w/err=0: serial=9388 error=0 11:49:10 Received message from Master: op=Filter serial=9389 11:49:10 Color wheel filter change from 0 to 0 11:49:10 FLIGetFilterPos err=0 currentPosition=0 11:49:10 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:10 Filter is already there-color wheel unchanged 11:49:11 Received message from Master: op=Shutter serial=9390 11:49:11 Shutter LASER close 11:49:11 Received message from Camera: op=State serial=9392 11:49:11 GetSingleValue result=40 Value=cccccccc 11:49:11 SkyScan query 11:49:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:49:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:11 Parameters OK 11:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:11 Set A/D data flow result=40 11:49:11 Set A/D channel type result=40 11:49:11 Set A/D encoding result=40 11:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:11 Set channel filter=0.000000e+000 result=40 11:49:11 Config A/D Result=40 11:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:11 Get A/D filter: -9.255963e+061 result=40 11:49:11 Get A/D value=-858993460 result=40 11:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:11 Parameters OK 11:49:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:11 Set A/D data flow result=40 11:49:11 Set A/D channel type result=40 11:49:11 Set A/D encoding result=40 11:49:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:11 Set channel filter=0.000000e+000 result=40 11:49:11 Config A/D Result=40 11:49:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:11 Get A/D filter: -9.255963e+061 result=40 11:49:11 Get A/D value=-858993460 result=40 11:49:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:11 Aux= 11:49:11 Message to Camera, serial 9392 queued 11:49:42 Received message from Master: op=PointingHead serial=9399 11:49:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:49:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:49:43 Point started: ret=0 11:49:43 point_skyscan result=0 11:49:43 Check angles 11:49:43 SkyScan query 11:49:44 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 11:49:44 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 11:49:44 Check angles 11:49:44 SkyScan query 11:49:45 SkyScan query done: ret=0 az=126.93<-8462 ze=38.505<-9433 Statuses=0009 0008 11:49:45 Msec=750 True Az=126.93 Ze=38.505 Az status=0009 Ze status=0008 11:49:45 Check angles 11:49:45 SkyScan query 11:49:45 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 11:49:45 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 11:49:46 Check angles 11:49:46 SkyScan query 11:49:46 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 11:49:46 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 11:49:46 Check angles 11:49:46 SkyScan query 11:49:47 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:49:47 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:49:47 Check angles 11:49:47 SkyScan query 11:49:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:49:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:49:48 Message to Master queued w/err=0: serial=9399 error=0 11:49:53 Received message from Master: op=Filter serial=9400 11:49:53 Color wheel filter change from 0 to 0 11:49:53 FLIGetFilterPos err=0 currentPosition=0 11:49:53 FLIGetStepsRemaining err=0 RemainingSteps=0 11:49:53 Filter is already there-color wheel unchanged 11:49:53 Received message from Master: op=Shutter serial=9401 11:49:53 Shutter LASER close 11:49:53 Received message from Camera: op=State serial=9403 11:49:53 GetSingleValue result=40 Value=cccccccc 11:49:53 SkyScan query 11:49:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:49:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:53 Parameters OK 11:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:53 Set A/D data flow result=40 11:49:53 Set A/D channel type result=40 11:49:53 Set A/D encoding result=40 11:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:53 Set channel filter=0.000000e+000 result=40 11:49:53 Config A/D Result=40 11:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:53 Get A/D filter: -9.255963e+061 result=40 11:49:53 Get A/D value=-858993460 result=40 11:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:49:53 Parameters OK 11:49:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:49:53 Set A/D data flow result=40 11:49:53 Set A/D channel type result=40 11:49:53 Set A/D encoding result=40 11:49:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:49:53 Set channel filter=0.000000e+000 result=40 11:49:53 Config A/D Result=40 11:49:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:49:53 Get A/D filter: -9.255963e+061 result=40 11:49:53 Get A/D value=-858993460 result=40 11:49:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:49:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:49:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:49:53 Aux= 11:49:53 Message to Camera, serial 9403 queued 11:50:24 Received message from Master: op=PointingHead serial=9410 11:50:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:50:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:50:25 Point started: ret=0 11:50:25 point_skyscan result=0 11:50:25 Check angles 11:50:25 SkyScan query 11:50:26 SkyScan query done: ret=0 az=152.985<-10199 ze=8.73<-11418 Statuses=0009 0009 11:50:26 Msec=0 True Az=152.985 Ze=8.73 Az status=0009 Ze status=0009 11:50:26 Check angles 11:50:26 SkyScan query 11:50:27 SkyScan query done: ret=0 az=135.615<-9041 ze=-12.225<-12815 Statuses=0009 0009 11:50:27 Msec=750 True Az=135.615 Ze=-12.225 Az status=0009 Ze status=0009 11:50:27 Check angles 11:50:27 SkyScan query 11:50:27 SkyScan query done: ret=0 az=118.035<-7869 ze=-33.165<-14211 Statuses=0009 0009 11:50:27 Msec=1500 True Az=118.035 Ze=-33.165 Az status=0009 Ze status=0009 11:50:28 Check angles 11:50:28 SkyScan query 11:50:28 SkyScan query done: ret=0 az=100.665<-6711 ze=-51.525<-15435 Statuses=0009 0009 11:50:28 Msec=2250 True Az=100.665 Ze=-51.525 Az status=0009 Ze status=0009 11:50:28 Check angles 11:50:28 SkyScan query 11:50:29 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 11:50:29 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 11:50:29 Check angles 11:50:29 SkyScan query 11:50:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:50:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:50:30 Message to Master queued w/err=0: serial=9410 error=0 11:50:35 Received message from Master: op=Filter serial=9411 11:50:35 Color wheel filter change from 0 to 0 11:50:35 FLIGetFilterPos err=0 currentPosition=0 11:50:35 FLIGetStepsRemaining err=0 RemainingSteps=0 11:50:35 Filter is already there-color wheel unchanged 11:50:35 Received message from Master: op=Shutter serial=9412 11:50:35 Shutter LASER close 11:50:35 Received message from Camera: op=State serial=9414 11:50:35 GetSingleValue result=40 Value=cccccccc 11:50:35 SkyScan query 11:50:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:50:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:35 Parameters OK 11:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:35 Set A/D data flow result=40 11:50:35 Set A/D channel type result=40 11:50:35 Set A/D encoding result=40 11:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:35 Set channel filter=0.000000e+000 result=40 11:50:35 Config A/D Result=40 11:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:35 Get A/D filter: -9.255963e+061 result=40 11:50:35 Get A/D value=-858993460 result=40 11:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:50:35 Parameters OK 11:50:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:50:35 Set A/D data flow result=40 11:50:35 Set A/D channel type result=40 11:50:35 Set A/D encoding result=40 11:50:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:50:35 Set channel filter=0.000000e+000 result=40 11:50:35 Config A/D Result=40 11:50:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:50:35 Get A/D filter: -9.255963e+061 result=40 11:50:35 Get A/D value=-858993460 result=40 11:50:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:50:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:50:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:50:35 Aux= 11:50:35 Message to Camera, serial 9414 queued 11:51:06 Received message from Master: op=PointingHead serial=9421 11:51:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:51:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:51:07 Point started: ret=0 11:51:07 point_skyscan result=0 11:51:07 Check angles 11:51:07 SkyScan query 11:51:08 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.435<-17429 Statuses=0009 0009 11:51:08 Msec=0 True Az=109.17 Ze=-81.435 Az status=0009 Ze status=0009 11:51:08 Check angles 11:51:08 SkyScan query 11:51:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 11:51:09 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 11:51:09 Check angles 11:51:09 SkyScan query 11:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.765<-20251 Statuses=0008 0009 11:51:10 Msec=1500 True Az=112.995 Ze=-123.765 Az status=0008 Ze status=0009 11:51:10 Check angles 11:51:10 SkyScan query 11:51:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 11:51:10 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 11:51:10 Check angles 11:51:10 SkyScan query 11:51:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 11:51:11 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 11:51:11 Check angles 11:51:11 SkyScan query 11:51:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:51:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:51:12 Message to Master queued w/err=0: serial=9421 error=0 11:51:17 Received message from Master: op=Filter serial=9422 11:51:17 Color wheel filter change from 0 to 0 11:51:17 FLIGetFilterPos err=0 currentPosition=0 11:51:17 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:17 Filter is already there-color wheel unchanged 11:51:17 Received message from Master: op=Shutter serial=9423 11:51:17 Shutter LASER open 11:51:17 Received message from Camera: op=State serial=9425 11:51:17 GetSingleValue result=40 Value=cccccccc 11:51:17 SkyScan query 11:51:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:51:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:18 Parameters OK 11:51:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:18 Set A/D data flow result=40 11:51:18 Set A/D channel type result=40 11:51:18 Set A/D encoding result=40 11:51:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:18 Set channel filter=0.000000e+000 result=40 11:51:18 Config A/D Result=40 11:51:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:18 Get A/D filter: -9.255963e+061 result=40 11:51:18 Get A/D value=-858993460 result=40 11:51:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:18 Parameters OK 11:51:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:18 Set A/D data flow result=40 11:51:18 Set A/D channel type result=40 11:51:18 Set A/D encoding result=40 11:51:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:18 Set channel filter=0.000000e+000 result=40 11:51:18 Config A/D Result=40 11:51:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:18 Get A/D filter: -9.255963e+061 result=40 11:51:18 Get A/D value=-858993460 result=40 11:51:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:18 Aux= 11:51:18 Message to Camera, serial 9425 queued 11:51:20 Received message from Master: op=Shutter serial=9429 11:51:20 Shutter LASER close 11:51:21 Received message from Master: op=PointingHead serial=9433 11:51:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:51:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:51:21 Point started: ret=0 11:51:21 point_skyscan result=0 11:51:22 Check angles 11:51:22 SkyScan query 11:51:22 SkyScan query done: ret=0 az=89.67<-5978 ze=157.005<-1533 Statuses=0009 0009 11:51:22 Msec=0 True Az=89.67 Ze=157.005 Az status=0009 Ze status=0009 11:51:22 Check angles 11:51:22 SkyScan query 11:51:23 SkyScan query done: ret=0 az=72.225<-4815 ze=136.035<-2931 Statuses=0009 0009 11:51:23 Msec=750 True Az=72.225 Ze=136.035 Az status=0009 Ze status=0009 11:51:23 Check angles 11:51:23 SkyScan query 11:51:24 SkyScan query done: ret=0 az=54.825<-3655 ze=115.095<-4327 Statuses=0009 0009 11:51:24 Msec=1500 True Az=54.825 Ze=115.095 Az status=0009 Ze status=0009 11:51:24 Check angles 11:51:24 SkyScan query 11:51:25 SkyScan query done: ret=0 az=40.845<-2723 ze=94.11<-5726 Statuses=0009 0009 11:51:25 Msec=2250 True Az=40.845 Ze=94.11 Az status=0009 Ze status=0009 11:51:25 Check angles 11:51:25 SkyScan query 11:51:25 SkyScan query done: ret=0 az=41.01<-2734 ze=73.17<-7122 Statuses=0008 0009 11:51:25 Msec=3000 True Az=41.01 Ze=73.17 Az status=0008 Ze status=0009 11:51:25 Check angles 11:51:25 SkyScan query 11:51:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 11:51:26 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 11:51:26 Check angles 11:51:26 SkyScan query 11:51:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:51:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:51:27 Message to Master queued w/err=0: serial=9433 error=0 11:51:32 Received message from Master: op=Filter serial=9434 11:51:32 Color wheel filter change from 0 to 0 11:51:32 FLIGetFilterPos err=0 currentPosition=0 11:51:32 FLIGetStepsRemaining err=0 RemainingSteps=0 11:51:32 Filter is already there-color wheel unchanged 11:51:32 Received message from Master: op=Shutter serial=9435 11:51:32 Shutter LASER close 11:51:32 Received message from Camera: op=State serial=9437 11:51:32 GetSingleValue result=40 Value=cccccccc 11:51:32 SkyScan query 11:51:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:51:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:33 Parameters OK 11:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:33 Set A/D data flow result=40 11:51:33 Set A/D channel type result=40 11:51:33 Set A/D encoding result=40 11:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:33 Set channel filter=0.000000e+000 result=40 11:51:33 Config A/D Result=40 11:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:33 Get A/D filter: -9.255963e+061 result=40 11:51:33 Get A/D value=-858993460 result=40 11:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:51:33 Parameters OK 11:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:51:33 Set A/D data flow result=40 11:51:33 Set A/D channel type result=40 11:51:33 Set A/D encoding result=40 11:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:51:33 Set channel filter=0.000000e+000 result=40 11:51:33 Config A/D Result=40 11:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:51:33 Get A/D filter: -9.255963e+061 result=40 11:51:33 Get A/D value=-858993460 result=40 11:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:51:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:51:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:51:33 Aux= 11:51:33 Message to Camera, serial 9437 queued 11:51:49 Received message from Master: op=Identify serial=9438 11:52:04 Received message from Master: op=PointingHead serial=9447 11:52:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:52:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:52:04 Point started: ret=0 11:52:04 point_skyscan result=0 11:52:05 Check angles 11:52:05 SkyScan query 11:52:05 SkyScan query done: ret=0 az=64.365<-4291 ze=66.555<-7563 Statuses=0009 0008 11:52:05 Msec=0 True Az=64.365 Ze=66.555 Az status=0009 Ze status=0008 11:52:05 Check angles 11:52:05 SkyScan query 11:52:06 SkyScan query done: ret=0 az=82.065<-5471 ze=66.495<-7567 Statuses=0009 0008 11:52:06 Msec=750 True Az=82.065 Ze=66.495 Az status=0009 Ze status=0008 11:52:06 Check angles 11:52:06 SkyScan query 11:52:07 SkyScan query done: ret=0 az=99.525<-6635 ze=66.495<-7567 Statuses=0009 0008 11:52:07 Msec=1500 True Az=99.525 Ze=66.495 Az status=0009 Ze status=0008 11:52:07 Check angles 11:52:07 SkyScan query 11:52:08 SkyScan query done: ret=0 az=116.925<-7795 ze=66.495<-7567 Statuses=0009 0008 11:52:08 Msec=2250 True Az=116.925 Ze=66.495 Az status=0009 Ze status=0008 11:52:08 Check angles 11:52:08 SkyScan query 11:52:08 SkyScan query done: ret=0 az=134.445<-8963 ze=66.495<-7567 Statuses=0009 0008 11:52:08 Msec=3000 True Az=134.445 Ze=66.495 Az status=0009 Ze status=0008 11:52:08 Check angles 11:52:08 SkyScan query 11:52:09 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 11:52:09 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-4 11:52:09] 11:52:09 Check angles 11:52:09 SkyScan query 11:52:10 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:52:10 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:52:10 Message to Master queued w/err=0: serial=9447 error=0 11:52:15 Received message from Master: op=Filter serial=9448 11:52:15 Color wheel filter change from 0 to 0 11:52:15 FLIGetFilterPos err=0 currentPosition=0 11:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:15 Filter is already there-color wheel unchanged 11:52:15 Received message from Master: op=Shutter serial=9449 11:52:15 Shutter LASER close 11:52:15 Received message from Camera: op=State serial=9451 11:52:15 GetSingleValue result=40 Value=cccccccc 11:52:15 SkyScan query 11:52:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:52:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:16 Parameters OK 11:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:16 Set A/D data flow result=40 11:52:16 Set A/D channel type result=40 11:52:16 Set A/D encoding result=40 11:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:16 Set channel filter=0.000000e+000 result=40 11:52:16 Config A/D Result=40 11:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:16 Get A/D filter: -9.255963e+061 result=40 11:52:16 Get A/D value=-858993460 result=40 11:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:16 Parameters OK 11:52:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:16 Set A/D data flow result=40 11:52:16 Set A/D channel type result=40 11:52:16 Set A/D encoding result=40 11:52:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:16 Set channel filter=0.000000e+000 result=40 11:52:16 Config A/D Result=40 11:52:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:16 Get A/D filter: -9.255963e+061 result=40 11:52:16 Get A/D value=-858993460 result=40 11:52:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:16 Aux= 11:52:16 Message to Camera, serial 9451 queued 11:52:46 Received message from Master: op=PointingHead serial=9458 11:52:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:52:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:52:47 Point started: ret=0 11:52:47 point_skyscan result=0 11:52:48 Check angles 11:52:48 SkyScan query 11:52:48 SkyScan query done: ret=0 az=135.03<-9002 ze=36.72<-9552 Statuses=0009 0009 11:52:48 Msec=0 True Az=135.03 Ze=36.72 Az status=0009 Ze status=0009 11:52:48 Check angles 11:52:48 SkyScan query 11:52:49 SkyScan query done: ret=0 az=117.54<-7836 ze=15.78<-10948 Statuses=0009 0009 11:52:49 Msec=750 True Az=117.54 Ze=15.78 Az status=0009 Ze status=0009 11:52:49 Check angles 11:52:49 SkyScan query 11:52:50 SkyScan query done: ret=0 az=99.96<-6664 ze=-5.64<-12376 Statuses=0009 0009 11:52:50 Msec=1500 True Az=99.96 Ze=-5.64 Az status=0009 Ze status=0009 11:52:50 Check angles 11:52:50 SkyScan query 11:52:50 SkyScan query done: ret=0 az=82.665<-5511 ze=-26.16<-13744 Statuses=0009 0009 11:52:50 Msec=2250 True Az=82.665 Ze=-26.16 Az status=0009 Ze status=0009 11:52:51 Check angles 11:52:51 SkyScan query 11:52:51 SkyScan query done: ret=0 az=65.175<-4345 ze=-38.55<-14570 Statuses=0009 0008 11:52:51 Msec=3000 True Az=65.175 Ze=-38.55 Az status=0009 Ze status=0008 11:52:51 Check angles 11:52:51 SkyScan query 11:52:52 SkyScan query done: ret=0 az=47.265<-3151 ze=-38.535<-14569 Statuses=0009 0008 11:52:52 Msec=3750 True Az=47.265 Ze=-38.535 Az status=0009 Ze status=0008 11:52:52 Check angles 11:52:52 SkyScan query 11:52:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:52:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 11:52:53 Message to Master queued w/err=0: serial=9458 error=0 11:52:58 Received message from Master: op=Filter serial=9459 11:52:58 Color wheel filter change from 0 to 0 11:52:58 FLIGetFilterPos err=0 currentPosition=0 11:52:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:52:58 Filter is already there-color wheel unchanged 11:52:58 Received message from Master: op=Shutter serial=9460 11:52:58 Shutter LASER close 11:52:58 Received message from Camera: op=State serial=9462 11:52:58 GetSingleValue result=40 Value=cccccccc 11:52:58 SkyScan query 11:52:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:52:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:58 Parameters OK 11:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:58 Set A/D data flow result=40 11:52:58 Set A/D channel type result=40 11:52:58 Set A/D encoding result=40 11:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:58 Set channel filter=0.000000e+000 result=40 11:52:58 Config A/D Result=40 11:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:58 Get A/D filter: -9.255963e+061 result=40 11:52:58 Get A/D value=-858993460 result=40 11:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:52:58 Parameters OK 11:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:52:58 Set A/D data flow result=40 11:52:58 Set A/D channel type result=40 11:52:58 Set A/D encoding result=40 11:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:52:58 Set channel filter=0.000000e+000 result=40 11:52:58 Config A/D Result=40 11:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:52:58 Get A/D filter: -9.255963e+061 result=40 11:52:58 Get A/D value=-858993460 result=40 11:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:52:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:52:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:52:58 Aux= 11:52:58 Message to Camera, serial 9462 queued 11:53:29 Received message from Master: op=PointingHead serial=9469 11:53:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:53:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:53:30 Point started: ret=0 11:53:30 point_skyscan result=0 11:53:30 Check angles 11:53:30 SkyScan query 11:53:31 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.4<-16560 Statuses=0009 0009 11:53:31 Msec=0 True Az=63.975 Ze=-68.4 Az status=0009 Ze status=0009 11:53:31 Check angles 11:53:31 SkyScan query 11:53:32 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.385<-17959 Statuses=0009 0009 11:53:32 Msec=750 True Az=81.54 Ze=-89.385 Az status=0009 Ze status=0009 11:53:32 Check angles 11:53:32 SkyScan query 11:53:32 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.73<-19382 Statuses=0009 0009 11:53:32 Msec=1500 True Az=99.54 Ze=-110.73 Az status=0009 Ze status=0009 11:53:33 Check angles 11:53:33 SkyScan query 11:53:33 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.685<-20779 Statuses=0009 0009 11:53:33 Msec=2250 True Az=116.97 Ze=-131.685 Az status=0009 Ze status=0009 11:53:33 Check angles 11:53:33 SkyScan query 11:53:34 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 11:53:34 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 11:53:34 Check angles 11:53:34 SkyScan query 11:53:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:53:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:53:35 Message to Master queued w/err=0: serial=9469 error=0 11:53:40 Received message from Master: op=Filter serial=9470 11:53:40 Color wheel filter change from 0 to 0 11:53:40 FLIGetFilterPos err=0 currentPosition=0 11:53:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:53:40 Filter is already there-color wheel unchanged 11:53:40 Received message from Master: op=Shutter serial=9471 11:53:40 Shutter LASER close 11:53:40 Received message from Camera: op=State serial=9473 11:53:40 GetSingleValue result=40 Value=cccccccc 11:53:40 SkyScan query 11:53:41 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:53:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:41 Parameters OK 11:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:41 Set A/D data flow result=40 11:53:41 Set A/D channel type result=40 11:53:41 Set A/D encoding result=40 11:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:41 Set channel filter=0.000000e+000 result=40 11:53:41 Config A/D Result=40 11:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:41 Get A/D filter: -9.255963e+061 result=40 11:53:41 Get A/D value=-858993460 result=40 11:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:53:41 Parameters OK 11:53:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:53:41 Set A/D data flow result=40 11:53:41 Set A/D channel type result=40 11:53:41 Set A/D encoding result=40 11:53:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:53:41 Set channel filter=0.000000e+000 result=40 11:53:41 Config A/D Result=40 11:53:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:53:41 Get A/D filter: -9.255963e+061 result=40 11:53:41 Get A/D value=-858993460 result=40 11:53:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:53:41 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:53:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:53:41 Aux= 11:53:41 Message to Camera, serial 9473 queued 11:54:11 Received message from Master: op=PointingHead serial=9480 11:54:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:54:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:54:12 Point started: ret=0 11:54:12 point_skyscan result=0 11:54:12 Check angles 11:54:12 SkyScan query 11:54:13 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.97<-23398 Statuses=0009 0009 11:54:13 Msec=0 True Az=113.025 Ze=-170.97 Az status=0009 Ze status=0009 11:54:13 Check angles 11:54:13 SkyScan query 11:54:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 11:54:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 11:54:14 Message to Master queued w/err=0: serial=9480 error=0 11:54:19 Received message from Master: op=Filter serial=9481 11:54:19 Color wheel filter change from 0 to 0 11:54:19 FLIGetFilterPos err=0 currentPosition=0 11:54:19 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:19 Filter is already there-color wheel unchanged 11:54:19 Received message from Master: op=Shutter serial=9482 11:54:19 Shutter LASER open 11:54:19 Received message from Camera: op=State serial=9484 11:54:19 GetSingleValue result=40 Value=cccccccc 11:54:19 SkyScan query 11:54:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:54:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:20 Parameters OK 11:54:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:20 Set A/D data flow result=40 11:54:20 Set A/D channel type result=40 11:54:20 Set A/D encoding result=40 11:54:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:20 Set channel filter=0.000000e+000 result=40 11:54:20 Config A/D Result=40 11:54:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:20 Get A/D filter: -9.255963e+061 result=40 11:54:20 Get A/D value=-858993460 result=40 11:54:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:20 Parameters OK 11:54:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:20 Set A/D data flow result=40 11:54:20 Set A/D channel type result=40 11:54:20 Set A/D encoding result=40 11:54:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:20 Set channel filter=0.000000e+000 result=40 11:54:20 Config A/D Result=40 11:54:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:20 Get A/D filter: -9.255963e+061 result=40 11:54:20 Get A/D value=-858993460 result=40 11:54:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:20 Aux= 11:54:20 Message to Camera, serial 9484 queued 11:54:22 Received message from Master: op=Shutter serial=9488 11:54:22 Shutter LASER close 11:54:23 Received message from Master: op=PointingHead serial=9492 11:54:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 11:54:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 11:54:23 Point started: ret=0 11:54:23 point_skyscan result=0 11:54:24 Check angles 11:54:24 SkyScan query 11:54:24 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.28<-21552 Statuses=0009 0009 11:54:24 Msec=0 True Az=135.93 Ze=-143.28 Az status=0009 Ze status=0009 11:54:25 Check angles 11:54:25 SkyScan query 11:54:25 SkyScan query done: ret=0 az=153.795<-10253 ze=-121.875<-20125 Statuses=0009 0009 11:54:25 Msec=750 True Az=153.795 Ze=-121.875 Az status=0009 Ze status=0009 11:54:25 Check angles 11:54:25 SkyScan query 11:54:26 SkyScan query done: ret=0 az=171.615<-11441 ze=-100.5<-18700 Statuses=0009 0009 11:54:26 Msec=1500 True Az=171.615 Ze=-100.5 Az status=0009 Ze status=0009 11:54:26 Check angles 11:54:26 SkyScan query 11:54:27 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.515<-17301 Statuses=0008 0009 11:54:27 Msec=2250 True Az=176.025 Ze=-79.515 Az status=0008 Ze status=0009 11:54:27 Check angles 11:54:27 SkyScan query 11:54:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.11<-15874 Statuses=0008 0009 11:54:27 Msec=3000 True Az=175.995 Ze=-58.11 Az status=0008 Ze status=0009 11:54:28 Check angles 11:54:28 SkyScan query 11:54:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 11:54:28 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 11:54:28 Message to Master queued w/err=0: serial=9492 error=0 11:54:33 Received message from Master: op=Filter serial=9493 11:54:33 Color wheel filter change from 0 to 0 11:54:33 FLIGetFilterPos err=0 currentPosition=0 11:54:33 FLIGetStepsRemaining err=0 RemainingSteps=0 11:54:33 Filter is already there-color wheel unchanged 11:54:33 Received message from Master: op=Shutter serial=9494 11:54:33 Shutter LASER close 11:54:34 Received message from Camera: op=State serial=9496 11:54:34 GetSingleValue result=40 Value=cccccccc 11:54:34 SkyScan query 11:54:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 11:54:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:34 Parameters OK 11:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:34 Set A/D data flow result=40 11:54:34 Set A/D channel type result=40 11:54:34 Set A/D encoding result=40 11:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:34 Set channel filter=0.000000e+000 result=40 11:54:34 Config A/D Result=40 11:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:34 Get A/D filter: -9.255963e+061 result=40 11:54:34 Get A/D value=-858993460 result=40 11:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:54:34 Parameters OK 11:54:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:54:34 Set A/D data flow result=40 11:54:34 Set A/D channel type result=40 11:54:34 Set A/D encoding result=40 11:54:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:54:34 Set channel filter=0.000000e+000 result=40 11:54:34 Config A/D Result=40 11:54:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:54:34 Get A/D filter: -9.255963e+061 result=40 11:54:34 Get A/D value=-858993460 result=40 11:54:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:54:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:54:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:54:34 Aux= 11:54:34 Message to Camera, serial 9496 queued 11:55:05 Received message from Master: op=PointingHead serial=9503 11:55:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 11:55:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 11:55:05 Point started: ret=0 11:55:05 point_skyscan result=0 11:55:06 Check angles 11:55:06 SkyScan query 11:55:07 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.36<-13424 Statuses=0009 0009 11:55:07 Msec=0 True Az=152.7 Ze=-21.36 Az status=0009 Ze status=0009 11:55:07 Check angles 11:55:07 SkyScan query 11:55:08 SkyScan query done: ret=0 az=135.255<-9017 ze=-0.435<-12029 Statuses=0009 0009 11:55:08 Msec=750 True Az=135.255 Ze=-0.435 Az status=0009 Ze status=0009 11:55:08 Check angles 11:55:08 SkyScan query 11:55:08 SkyScan query done: ret=0 az=117.72<-7848 ze=20.535<-10631 Statuses=0009 0009 11:55:08 Msec=1500 True Az=117.72 Ze=20.535 Az status=0009 Ze status=0009 11:55:08 Check angles 11:55:08 SkyScan query 11:55:09 SkyScan query done: ret=0 az=100.35<-6690 ze=41.505<-9233 Statuses=0009 0009 11:55:09 Msec=2250 True Az=100.35 Ze=41.505 Az status=0009 Ze status=0009 11:55:09 Check angles 11:55:09 SkyScan query 11:55:10 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 11:55:10 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 11:55:10 Check angles 11:55:10 SkyScan query 11:55:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 11:55:11 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 11:55:11 Message to Master queued w/err=0: serial=9503 error=0 11:55:16 Received message from Master: op=Filter serial=9504 11:55:16 Color wheel filter change from 0 to 0 11:55:16 FLIGetFilterPos err=0 currentPosition=0 11:55:16 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:16 Filter is already there-color wheel unchanged 11:55:16 Received message from Master: op=Shutter serial=9505 11:55:16 Shutter LASER close 11:55:16 Received message from Camera: op=State serial=9507 11:55:16 GetSingleValue result=40 Value=cccccccc 11:55:16 SkyScan query 11:55:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 11:55:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:16 Parameters OK 11:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:16 Set A/D data flow result=40 11:55:16 Set A/D channel type result=40 11:55:16 Set A/D encoding result=40 11:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:16 Set channel filter=0.000000e+000 result=40 11:55:16 Config A/D Result=40 11:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:16 Get A/D filter: -9.255963e+061 result=40 11:55:16 Get A/D value=-858993460 result=40 11:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:16 Parameters OK 11:55:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:16 Set A/D data flow result=40 11:55:16 Set A/D channel type result=40 11:55:16 Set A/D encoding result=40 11:55:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:16 Set channel filter=0.000000e+000 result=40 11:55:16 Config A/D Result=40 11:55:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:16 Get A/D filter: -9.255963e+061 result=40 11:55:16 Get A/D value=-858993460 result=40 11:55:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:16 Aux= 11:55:16 Message to Camera, serial 9507 queued 11:55:47 Received message from Master: op=PointingHead serial=9514 11:55:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 11:55:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 11:55:48 Point started: ret=0 11:55:48 point_skyscan result=0 11:55:48 Check angles 11:55:48 SkyScan query 11:55:49 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 11:55:49 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 11:55:49 Check angles 11:55:49 SkyScan query 11:55:50 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 11:55:50 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 11:55:50 Check angles 11:55:50 SkyScan query 11:55:50 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 11:55:50 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 11:55:51 Check angles 11:55:51 SkyScan query 11:55:51 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 11:55:51 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 11:55:51 Check angles 11:55:51 SkyScan query 11:55:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 11:55:52 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 11:55:52 Check angles 11:55:52 SkyScan query 11:55:53 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 11:55:53 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 11:55:53 Message to Master queued w/err=0: serial=9514 error=0 11:55:58 Received message from Master: op=Filter serial=9515 11:55:58 Color wheel filter change from 0 to 0 11:55:58 FLIGetFilterPos err=0 currentPosition=0 11:55:58 FLIGetStepsRemaining err=0 RemainingSteps=0 11:55:58 Filter is already there-color wheel unchanged 11:55:58 Received message from Master: op=Shutter serial=9516 11:55:58 Shutter LASER close 11:55:58 Received message from Camera: op=State serial=9518 11:55:58 GetSingleValue result=40 Value=cccccccc 11:55:58 SkyScan query 11:55:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 11:55:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:58 Parameters OK 11:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:58 Set A/D data flow result=40 11:55:58 Set A/D channel type result=40 11:55:58 Set A/D encoding result=40 11:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:58 Set channel filter=0.000000e+000 result=40 11:55:58 Config A/D Result=40 11:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:58 Get A/D filter: -9.255963e+061 result=40 11:55:58 Get A/D value=-858993460 result=40 11:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:55:58 Parameters OK 11:55:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:55:58 Set A/D data flow result=40 11:55:58 Set A/D channel type result=40 11:55:58 Set A/D encoding result=40 11:55:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:55:58 Set channel filter=0.000000e+000 result=40 11:55:58 Config A/D Result=40 11:55:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:55:58 Get A/D filter: -9.255963e+061 result=40 11:55:58 Get A/D value=-858993460 result=40 11:55:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:55:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:55:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:55:58 Aux= 11:55:58 Message to Camera, serial 9518 queued 11:56:29 Received message from Master: op=PointingHead serial=9525 11:56:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 11:56:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 11:56:30 Point started: ret=0 11:56:30 point_skyscan result=0 11:56:30 Check angles 11:56:30 SkyScan query 11:56:31 SkyScan query done: ret=0 az=152.985<-10199 ze=8.595<-11427 Statuses=0009 0009 11:56:31 Msec=0 True Az=152.985 Ze=8.595 Az status=0009 Ze status=0009 11:56:31 Check angles 11:56:31 SkyScan query 11:56:32 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.795<-12853 Statuses=0009 0009 11:56:32 Msec=750 True Az=135.15 Ze=-12.795 Az status=0009 Ze status=0009 11:56:32 Check angles 11:56:32 SkyScan query 11:56:32 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.705<-14247 Statuses=0009 0009 11:56:32 Msec=1500 True Az=117.6 Ze=-33.705 Az status=0009 Ze status=0009 11:56:33 Check angles 11:56:33 SkyScan query 11:56:33 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.555<-15437 Statuses=0009 0009 11:56:33 Msec=2250 True Az=100.23 Ze=-51.555 Az status=0009 Ze status=0009 11:56:33 Check angles 11:56:33 SkyScan query 11:56:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 11:56:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 11:56:34 Check angles 11:56:34 SkyScan query 11:56:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:56:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 11:56:35 Message to Master queued w/err=0: serial=9525 error=0 11:56:40 Received message from Master: op=Filter serial=9526 11:56:40 Color wheel filter change from 0 to 0 11:56:40 FLIGetFilterPos err=0 currentPosition=0 11:56:40 FLIGetStepsRemaining err=0 RemainingSteps=0 11:56:40 Filter is already there-color wheel unchanged 11:56:40 Received message from Master: op=Shutter serial=9527 11:56:40 Shutter LASER close 11:56:40 Received message from Camera: op=State serial=9529 11:56:40 GetSingleValue result=40 Value=cccccccc 11:56:40 SkyScan query 11:56:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 11:56:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:40 Parameters OK 11:56:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:40 Set A/D data flow result=40 11:56:40 Set A/D channel type result=40 11:56:40 Set A/D encoding result=40 11:56:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:40 Set channel filter=0.000000e+000 result=40 11:56:40 Config A/D Result=40 11:56:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:40 Get A/D filter: -9.255963e+061 result=40 11:56:40 Get A/D value=-858993460 result=40 11:56:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:56:40 Parameters OK 11:56:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:56:40 Set A/D data flow result=40 11:56:40 Set A/D channel type result=40 11:56:40 Set A/D encoding result=40 11:56:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:56:40 Set channel filter=0.000000e+000 result=40 11:56:40 Config A/D Result=40 11:56:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:56:40 Get A/D filter: -9.255963e+061 result=40 11:56:40 Get A/D value=-858993460 result=40 11:56:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:56:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:56:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:56:40 Aux= 11:56:40 Message to Camera, serial 9529 queued 11:57:11 Received message from Master: op=PointingHead serial=9536 11:57:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 11:57:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 11:57:12 Point started: ret=0 11:57:12 point_skyscan result=0 11:57:12 Check angles 11:57:12 SkyScan query 11:57:13 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.12<-17408 Statuses=0009 0009 11:57:13 Msec=0 True Az=108.9 Ze=-81.12 Az status=0009 Ze status=0009 11:57:13 Check angles 11:57:13 SkyScan query 11:57:14 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.09<-18806 Statuses=0008 0009 11:57:14 Msec=750 True Az=113.01 Ze=-102.09 Az status=0008 Ze status=0009 11:57:14 Check angles 11:57:14 SkyScan query 11:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 11:57:15 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 11:57:15 Check angles 11:57:15 SkyScan query 11:57:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 11:57:15 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 11:57:15 Check angles 11:57:15 SkyScan query 11:57:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 11:57:16 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 11:57:16 Check angles 11:57:16 SkyScan query 11:57:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 11:57:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 11:57:17 Message to Master queued w/err=0: serial=9536 error=0 11:57:22 Received message from Master: op=Filter serial=9537 11:57:22 Color wheel filter change from 0 to 0 11:57:22 FLIGetFilterPos err=0 currentPosition=0 11:57:22 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:22 Filter is already there-color wheel unchanged 11:57:22 Received message from Master: op=Shutter serial=9538 11:57:22 Shutter LASER open 11:57:22 Received message from Camera: op=State serial=9540 11:57:22 GetSingleValue result=40 Value=cccccccc 11:57:22 SkyScan query 11:57:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 11:57:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:23 Parameters OK 11:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:23 Set A/D data flow result=40 11:57:23 Set A/D channel type result=40 11:57:23 Set A/D encoding result=40 11:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:23 Set channel filter=0.000000e+000 result=40 11:57:23 Config A/D Result=40 11:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:23 Get A/D filter: -9.255963e+061 result=40 11:57:23 Get A/D value=-858993460 result=40 11:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:23 Parameters OK 11:57:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:23 Set A/D data flow result=40 11:57:23 Set A/D channel type result=40 11:57:23 Set A/D encoding result=40 11:57:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:23 Set channel filter=0.000000e+000 result=40 11:57:23 Config A/D Result=40 11:57:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:23 Get A/D filter: -9.255963e+061 result=40 11:57:23 Get A/D value=-858993460 result=40 11:57:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:23 Aux= 11:57:23 Message to Camera, serial 9540 queued 11:57:25 Received message from Master: op=Shutter serial=9544 11:57:25 Shutter LASER close 11:57:26 Received message from Master: op=PointingHead serial=9548 11:57:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 11:57:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 11:57:26 Point started: ret=0 11:57:26 point_skyscan result=0 11:57:27 Check angles 11:57:27 SkyScan query 11:57:27 SkyScan query done: ret=0 az=89.685<-5979 ze=156.975<-1535 Statuses=0009 0009 11:57:27 Msec=0 True Az=89.685 Ze=156.975 Az status=0009 Ze status=0009 11:57:27 Check angles 11:57:27 SkyScan query 11:57:28 SkyScan query done: ret=0 az=71.895<-4793 ze=135.57<-2962 Statuses=0009 0009 11:57:28 Msec=750 True Az=71.895 Ze=135.57 Az status=0009 Ze status=0009 11:57:28 Check angles 11:57:28 SkyScan query 11:57:29 SkyScan query done: ret=0 az=54.615<-3641 ze=114.63<-4358 Statuses=0009 0009 11:57:29 Msec=1500 True Az=54.615 Ze=114.63 Az status=0009 Ze status=0009 11:57:29 Check angles 11:57:29 SkyScan query 11:57:30 SkyScan query done: ret=0 az=40.905<-2727 ze=93.66<-5756 Statuses=0009 0009 11:57:30 Msec=2250 True Az=40.905 Ze=93.66 Az status=0009 Ze status=0009 11:57:30 Check angles 11:57:30 SkyScan query 11:57:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.255<-7183 Statuses=0008 0009 11:57:30 Msec=3000 True Az=40.995 Ze=72.255 Az status=0008 Ze status=0009 11:57:30 Check angles 11:57:30 SkyScan query 11:57:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.17<-8522 Statuses=0008 0009 11:57:31 Msec=3750 True Az=40.995 Ze=52.17 Az status=0008 Ze status=0009 11:57:31 Check angles 11:57:31 SkyScan query 11:57:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 11:57:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 11:57:32 Message to Master queued w/err=0: serial=9548 error=0 11:57:37 Received message from Master: op=Filter serial=9549 11:57:37 Color wheel filter change from 0 to 0 11:57:37 FLIGetFilterPos err=0 currentPosition=0 11:57:37 FLIGetStepsRemaining err=0 RemainingSteps=0 11:57:37 Filter is already there-color wheel unchanged 11:57:37 Received message from Master: op=Shutter serial=9550 11:57:37 Shutter LASER close 11:57:37 Received message from Camera: op=State serial=9552 11:57:37 GetSingleValue result=40 Value=cccccccc 11:57:37 SkyScan query 11:57:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 11:57:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:38 Parameters OK 11:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:38 Set A/D data flow result=40 11:57:38 Set A/D channel type result=40 11:57:38 Set A/D encoding result=40 11:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:38 Set channel filter=0.000000e+000 result=40 11:57:38 Config A/D Result=40 11:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:38 Get A/D filter: -9.255963e+061 result=40 11:57:38 Get A/D value=-858993460 result=40 11:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:57:38 Parameters OK 11:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:57:38 Set A/D data flow result=40 11:57:38 Set A/D channel type result=40 11:57:38 Set A/D encoding result=40 11:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:57:38 Set channel filter=0.000000e+000 result=40 11:57:38 Config A/D Result=40 11:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:57:38 Get A/D filter: -9.255963e+061 result=40 11:57:38 Get A/D value=-858993460 result=40 11:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:57:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:57:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:57:38 Aux= 11:57:38 Message to Camera, serial 9552 queued 11:58:09 Received message from Master: op=PointingHead serial=9559 11:58:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 11:58:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 11:58:09 Point started: ret=0 11:58:09 point_skyscan result=0 11:58:10 Check angles 11:58:10 SkyScan query 11:58:10 SkyScan query done: ret=0 az=63.81<-4254 ze=66.555<-7563 Statuses=0009 0008 11:58:10 Msec=0 True Az=63.81 Ze=66.555 Az status=0009 Ze status=0008 11:58:10 Check angles 11:58:10 SkyScan query 11:58:11 SkyScan query done: ret=0 az=81.12<-5408 ze=66.51<-7566 Statuses=0009 0008 11:58:11 Msec=750 True Az=81.12 Ze=66.51 Az status=0009 Ze status=0008 11:58:11 Check angles 11:58:11 SkyScan query 11:58:12 SkyScan query done: ret=0 az=99.225<-6615 ze=66.495<-7567 Statuses=0009 0008 11:58:12 Msec=1500 True Az=99.225 Ze=66.495 Az status=0009 Ze status=0008 11:58:12 Check angles 11:58:12 SkyScan query 11:58:13 SkyScan query done: ret=0 az=116.625<-7775 ze=66.495<-7567 Statuses=0009 0008 11:58:13 Msec=2250 True Az=116.625 Ze=66.495 Az status=0009 Ze status=0008 11:58:13 Check angles 11:58:13 SkyScan query 11:58:13 SkyScan query done: ret=0 az=134.07<-8938 ze=66.495<-7567 Statuses=0009 0008 11:58:13 Msec=3000 True Az=134.07 Ze=66.495 Az status=0009 Ze status=0008 11:58:13 Check angles 11:58:13 SkyScan query 11:58:14 SkyScan query done: ret=0 az=151.8<-10120 ze=66.495<-7567 Statuses=0009 0008 11:58:14 Msec=3750 True Az=151.8 Ze=66.495 Az status=0009 Ze status=0008 11:58:14 Check angles 11:58:14 SkyScan query 11:58:15 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 11:58:15 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 11:58:15 Message to Master queued w/err=0: serial=9559 error=0 11:58:20 Received message from Master: op=Filter serial=9560 11:58:20 Color wheel filter change from 0 to 0 11:58:20 FLIGetFilterPos err=0 currentPosition=0 11:58:20 FLIGetStepsRemaining err=0 RemainingSteps=0 11:58:20 Filter is already there-color wheel unchanged 11:58:20 Received message from Master: op=Shutter serial=9561 11:58:20 Shutter LASER close 11:58:20 Received message from Camera: op=State serial=9563 11:58:20 GetSingleValue result=40 Value=cccccccc 11:58:20 SkyScan query 11:58:21 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 11:58:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:21 Parameters OK 11:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:21 Set A/D data flow result=40 11:58:21 Set A/D channel type result=40 11:58:21 Set A/D encoding result=40 11:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:21 Set channel filter=0.000000e+000 result=40 11:58:21 Config A/D Result=40 11:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:21 Get A/D filter: -9.255963e+061 result=40 11:58:21 Get A/D value=-858993460 result=40 11:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:58:21 Parameters OK 11:58:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:58:21 Set A/D data flow result=40 11:58:21 Set A/D channel type result=40 11:58:21 Set A/D encoding result=40 11:58:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:58:21 Set channel filter=0.000000e+000 result=40 11:58:21 Config A/D Result=40 11:58:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:58:21 Get A/D filter: -9.255963e+061 result=40 11:58:21 Get A/D value=-858993460 result=40 11:58:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:58:21 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:58:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:58:21 Aux= 11:58:21 Message to Camera, serial 9563 queued 11:58:51 Received message from Master: op=PointingHead serial=9570 11:58:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 11:58:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 11:58:52 Point started: ret=0 11:58:52 point_skyscan result=0 11:58:53 Check angles 11:58:53 SkyScan query 11:58:53 SkyScan query done: ret=0 az=134.565<-8971 ze=36.24<-9584 Statuses=0009 0009 11:58:53 Msec=0 True Az=134.565 Ze=36.24 Az status=0009 Ze status=0009 11:58:53 Check angles 11:58:53 SkyScan query 11:58:54 SkyScan query done: ret=0 az=117.06<-7804 ze=15.3<-10980 Statuses=0009 0009 11:58:54 Msec=750 True Az=117.06 Ze=15.3 Az status=0009 Ze status=0009 11:58:54 Check angles 11:58:54 SkyScan query 11:58:55 SkyScan query done: ret=0 az=99.57<-6638 ze=-5.7<-12380 Statuses=0009 0009 11:58:55 Msec=1500 True Az=99.57 Ze=-5.7 Az status=0009 Ze status=0009 11:58:55 Check angles 11:58:55 SkyScan query 11:58:55 SkyScan query done: ret=0 az=82.155<-5477 ze=-26.655<-13777 Statuses=0009 0009 11:58:55 Msec=2250 True Az=82.155 Ze=-26.655 Az status=0009 Ze status=0009 11:58:56 Check angles 11:58:56 SkyScan query 11:58:56 SkyScan query done: ret=0 az=64.74<-4316 ze=-38.565<-14571 Statuses=0009 0008 11:58:56 Msec=3000 True Az=64.74 Ze=-38.565 Az status=0009 Ze status=0008 11:58:56 Check angles 11:58:56 SkyScan query 11:58:57 SkyScan query done: ret=0 az=46.92<-3128 ze=-38.52<-14568 Statuses=0009 0008 11:58:57 Msec=3750 True Az=46.92 Ze=-38.52 Az status=0009 Ze status=0008 11:58:57 Check angles 11:58:57 SkyScan query 11:58:58 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 11:58:58 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 11:58:58 Message to Master queued w/err=0: serial=9570 error=0 11:59:03 Received message from Master: op=Filter serial=9571 11:59:03 Color wheel filter change from 0 to 0 11:59:03 FLIGetFilterPos err=0 currentPosition=0 11:59:03 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:03 Filter is already there-color wheel unchanged 11:59:03 Received message from Master: op=Shutter serial=9572 11:59:03 Shutter LASER close 11:59:03 Received message from Camera: op=State serial=9574 11:59:03 GetSingleValue result=40 Value=cccccccc 11:59:03 SkyScan query 11:59:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 11:59:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:03 Parameters OK 11:59:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:03 Set A/D data flow result=40 11:59:03 Set A/D channel type result=40 11:59:03 Set A/D encoding result=40 11:59:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:03 Set channel filter=0.000000e+000 result=40 11:59:03 Config A/D Result=40 11:59:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:03 Get A/D filter: -9.255963e+061 result=40 11:59:03 Get A/D value=-858993460 result=40 11:59:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:03 Parameters OK 11:59:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:03 Set A/D data flow result=40 11:59:03 Set A/D channel type result=40 11:59:03 Set A/D encoding result=40 11:59:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:03 Set channel filter=0.000000e+000 result=40 11:59:03 Config A/D Result=40 11:59:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:03 Get A/D filter: -9.255963e+061 result=40 11:59:03 Get A/D value=-858993460 result=40 11:59:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:03 Aux= 11:59:03 Message to Camera, serial 9574 queued 11:59:34 Received message from Master: op=PointingHead serial=9581 11:59:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 11:59:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 11:59:35 Point started: ret=0 11:59:35 point_skyscan result=0 11:59:35 Check angles 11:59:35 SkyScan query 11:59:36 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.145<-16543 Statuses=0009 0009 11:59:36 Msec=0 True Az=63.795 Ze=-68.145 Az status=0009 Ze status=0009 11:59:36 Check angles 11:59:36 SkyScan query 11:59:37 SkyScan query done: ret=0 az=81.225<-5415 ze=-89.115<-17941 Statuses=0009 0009 11:59:37 Msec=750 True Az=81.225 Ze=-89.115 Az status=0009 Ze status=0009 11:59:37 Check angles 11:59:37 SkyScan query 11:59:37 SkyScan query done: ret=0 az=98.955<-6597 ze=-110.055<-19337 Statuses=0009 0009 11:59:37 Msec=1500 True Az=98.955 Ze=-110.055 Az status=0009 Ze status=0009 11:59:38 Check angles 11:59:38 SkyScan query 11:59:38 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.01<-20734 Statuses=0009 0009 11:59:38 Msec=2250 True Az=116.325 Ze=-131.01 Az status=0009 Ze status=0009 11:59:38 Check angles 11:59:38 SkyScan query 11:59:39 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 11:59:39 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 11:59:39 Check angles 11:59:39 SkyScan query 11:59:40 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 11:59:40 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 11:59:40 Message to Master queued w/err=0: serial=9581 error=0 11:59:45 Received message from Master: op=Filter serial=9582 11:59:45 Color wheel filter change from 0 to 0 11:59:45 FLIGetFilterPos err=0 currentPosition=0 11:59:45 FLIGetStepsRemaining err=0 RemainingSteps=0 11:59:45 Filter is already there-color wheel unchanged 11:59:45 Received message from Master: op=Shutter serial=9583 11:59:45 Shutter LASER close 11:59:45 Received message from Camera: op=State serial=9585 11:59:45 GetSingleValue result=40 Value=cccccccc 11:59:45 SkyScan query 11:59:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 11:59:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:45 Parameters OK 11:59:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:45 Set A/D data flow result=40 11:59:45 Set A/D channel type result=40 11:59:45 Set A/D encoding result=40 11:59:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:45 Set channel filter=0.000000e+000 result=40 11:59:45 Config A/D Result=40 11:59:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:45 Get A/D filter: -9.255963e+061 result=40 11:59:45 Get A/D value=-858993460 result=40 11:59:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 11:59:45 Parameters OK 11:59:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 11:59:45 Set A/D data flow result=40 11:59:45 Set A/D channel type result=40 11:59:45 Set A/D encoding result=40 11:59:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 11:59:45 Set channel filter=0.000000e+000 result=40 11:59:45 Config A/D Result=40 11:59:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 11:59:45 Get A/D filter: -9.255963e+061 result=40 11:59:45 Get A/D value=-858993460 result=40 11:59:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 11:59:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 11:59:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 11:59:45 Aux= 11:59:45 Message to Camera, serial 9585 queued 12:00:16 Received message from Master: op=PointingHead serial=9592 12:00:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:00:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:00:17 Point started: ret=0 12:00:17 point_skyscan result=0 12:00:17 Check angles 12:00:17 SkyScan query 12:00:18 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.315<-23421 Statuses=0009 0009 12:00:18 Msec=0 True Az=113.025 Ze=-171.315 Az status=0009 Ze status=0009 12:00:18 Check angles 12:00:18 SkyScan query 12:00:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:00:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:00:19 Message to Master queued w/err=0: serial=9592 error=0 12:00:24 Received message from Master: op=Filter serial=9593 12:00:24 Color wheel filter change from 0 to 0 12:00:24 FLIGetFilterPos err=0 currentPosition=0 12:00:24 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:24 Filter is already there-color wheel unchanged 12:00:24 Received message from Master: op=Shutter serial=9594 12:00:24 Shutter LASER open 12:00:24 Received message from Camera: op=State serial=9596 12:00:24 GetSingleValue result=40 Value=cccccccc 12:00:24 SkyScan query 12:00:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:00:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:25 Parameters OK 12:00:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:25 Set A/D data flow result=40 12:00:25 Set A/D channel type result=40 12:00:25 Set A/D encoding result=40 12:00:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:25 Set channel filter=0.000000e+000 result=40 12:00:25 Config A/D Result=40 12:00:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:25 Get A/D filter: -9.255963e+061 result=40 12:00:25 Get A/D value=-858993460 result=40 12:00:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:25 Parameters OK 12:00:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:25 Set A/D data flow result=40 12:00:25 Set A/D channel type result=40 12:00:25 Set A/D encoding result=40 12:00:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:25 Set channel filter=0.000000e+000 result=40 12:00:25 Config A/D Result=40 12:00:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:25 Get A/D filter: -9.255963e+061 result=40 12:00:25 Get A/D value=-858993460 result=40 12:00:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:25 Aux= 12:00:25 Message to Camera, serial 9596 queued 12:00:27 Received message from Master: op=Shutter serial=9600 12:00:27 Shutter LASER close 12:00:28 Received message from Master: op=PointingHead serial=9604 12:00:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:00:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:00:28 Point started: ret=0 12:00:28 point_skyscan result=0 12:00:29 Check angles 12:00:29 SkyScan query 12:00:29 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.52<-21568 Statuses=0009 0009 12:00:29 Msec=0 True Az=135.735 Ze=-143.52 Az status=0009 Ze status=0009 12:00:30 Check angles 12:00:30 SkyScan query 12:00:30 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.55<-20170 Statuses=0009 0009 12:00:30 Msec=750 True Az=153.24 Ze=-122.55 Az status=0009 Ze status=0009 12:00:30 Check angles 12:00:30 SkyScan query 12:00:31 SkyScan query done: ret=0 az=170.61<-11374 ze=-101.595<-18773 Statuses=0009 0009 12:00:31 Msec=1500 True Az=170.61 Ze=-101.595 Az status=0009 Ze status=0009 12:00:31 Check angles 12:00:31 SkyScan query 12:00:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.625<-17375 Statuses=0008 0009 12:00:32 Msec=2250 True Az=176.025 Ze=-80.625 Az status=0008 Ze status=0009 12:00:32 Check angles 12:00:32 SkyScan query 12:00:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 12:00:32 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 12:00:33 Check angles 12:00:33 SkyScan query 12:00:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:00:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:00:33 Message to Master queued w/err=0: serial=9604 error=0 12:00:38 Received message from Master: op=Filter serial=9605 12:00:38 Color wheel filter change from 0 to 0 12:00:38 FLIGetFilterPos err=0 currentPosition=0 12:00:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:00:38 Filter is already there-color wheel unchanged 12:00:38 Received message from Master: op=Shutter serial=9606 12:00:38 Shutter LASER close 12:00:39 Received message from Camera: op=State serial=9608 12:00:39 GetSingleValue result=40 Value=cccccccc 12:00:39 SkyScan query [UTC 2018-12-4 12:00:39] 12:00:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:00:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:39 Parameters OK 12:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:39 Set A/D data flow result=40 12:00:39 Set A/D channel type result=40 12:00:39 Set A/D encoding result=40 12:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:39 Set channel filter=0.000000e+000 result=40 12:00:39 Config A/D Result=40 12:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:39 Get A/D filter: -9.255963e+061 result=40 12:00:39 Get A/D value=-858993460 result=40 12:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:00:39 Parameters OK 12:00:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:00:39 Set A/D data flow result=40 12:00:39 Set A/D channel type result=40 12:00:39 Set A/D encoding result=40 12:00:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:00:39 Set channel filter=0.000000e+000 result=40 12:00:39 Config A/D Result=40 12:00:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:00:39 Get A/D filter: -9.255963e+061 result=40 12:00:39 Get A/D value=-858993460 result=40 12:00:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:00:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:00:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:00:39 Aux= 12:00:39 Message to Camera, serial 9608 queued 12:01:10 Received message from Master: op=PointingHead serial=9615 12:01:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:01:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:01:10 Point started: ret=0 12:01:10 point_skyscan result=0 12:01:11 Check angles 12:01:11 SkyScan query 12:01:12 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.84<-13456 Statuses=0009 0009 12:01:12 Msec=0 True Az=152.955 Ze=-21.84 Az status=0009 Ze status=0009 12:01:12 Check angles 12:01:12 SkyScan query 12:01:12 SkyScan query done: ret=0 az=135.465<-9031 ze=-0.885<-12059 Statuses=0009 0009 12:01:12 Msec=750 True Az=135.465 Ze=-0.885 Az status=0009 Ze status=0009 12:01:13 Check angles 12:01:13 SkyScan query 12:01:13 SkyScan query done: ret=0 az=117.84<-7856 ze=20.07<-10662 Statuses=0009 0009 12:01:13 Msec=1500 True Az=117.84 Ze=20.07 Az status=0009 Ze status=0009 12:01:13 Check angles 12:01:13 SkyScan query 12:01:14 SkyScan query done: ret=0 az=100.455<-6697 ze=41.025<-9265 Statuses=0009 0009 12:01:14 Msec=2250 True Az=100.455 Ze=41.025 Az status=0009 Ze status=0009 12:01:14 Check angles 12:01:14 SkyScan query 12:01:15 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:01:15 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:01:15 Check angles 12:01:15 SkyScan query 12:01:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:01:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:01:15 Message to Master queued w/err=0: serial=9615 error=0 12:01:20 Received message from Master: op=Filter serial=9616 12:01:20 Color wheel filter change from 0 to 0 12:01:20 FLIGetFilterPos err=0 currentPosition=0 12:01:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:01:20 Filter is already there-color wheel unchanged 12:01:21 Received message from Master: op=Shutter serial=9617 12:01:21 Shutter LASER close 12:01:21 Received message from Camera: op=State serial=9619 12:01:21 GetSingleValue result=40 Value=cccccccc 12:01:21 SkyScan query 12:01:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:01:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:21 Parameters OK 12:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:21 Set A/D data flow result=40 12:01:21 Set A/D channel type result=40 12:01:21 Set A/D encoding result=40 12:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:21 Set channel filter=0.000000e+000 result=40 12:01:21 Config A/D Result=40 12:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:21 Get A/D filter: -9.255963e+061 result=40 12:01:21 Get A/D value=-858993460 result=40 12:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:01:21 Parameters OK 12:01:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:01:21 Set A/D data flow result=40 12:01:21 Set A/D channel type result=40 12:01:21 Set A/D encoding result=40 12:01:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:01:21 Set channel filter=0.000000e+000 result=40 12:01:21 Config A/D Result=40 12:01:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:01:21 Get A/D filter: -9.255963e+061 result=40 12:01:21 Get A/D value=-858993460 result=40 12:01:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:01:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:01:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:01:21 Aux= 12:01:21 Message to Camera, serial 9619 queued 12:01:52 Received message from Master: op=PointingHead serial=9626 12:01:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:01:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:01:52 Point started: ret=0 12:01:52 point_skyscan result=0 12:01:53 Check angles 12:01:53 SkyScan query 12:01:54 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 12:01:54 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 12:01:54 Check angles 12:01:54 SkyScan query 12:01:55 SkyScan query done: ret=0 az=127.215<-8481 ze=38.505<-9433 Statuses=0009 0008 12:01:55 Msec=750 True Az=127.215 Ze=38.505 Az status=0009 Ze status=0008 12:01:55 Check angles 12:01:55 SkyScan query 12:01:55 SkyScan query done: ret=0 az=144.675<-9645 ze=38.505<-9433 Statuses=0009 0008 12:01:55 Msec=1500 True Az=144.675 Ze=38.505 Az status=0009 Ze status=0008 12:01:55 Check angles 12:01:55 SkyScan query 12:01:56 SkyScan query done: ret=0 az=162.195<-10813 ze=38.505<-9433 Statuses=0009 0008 12:01:56 Msec=2250 True Az=162.195 Ze=38.505 Az status=0009 Ze status=0008 12:01:56 Check angles 12:01:56 SkyScan query 12:01:57 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:01:57 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:01:57 Check angles 12:01:57 SkyScan query 12:01:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:01:58 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 12:01:58 Message to Master queued w/err=0: serial=9626 error=0 12:02:03 Received message from Master: op=Filter serial=9627 12:02:03 Color wheel filter change from 0 to 0 12:02:03 FLIGetFilterPos err=0 currentPosition=0 12:02:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:03 Filter is already there-color wheel unchanged 12:02:03 Received message from Master: op=Shutter serial=9628 12:02:03 Shutter LASER close 12:02:03 Received message from Camera: op=State serial=9630 12:02:03 GetSingleValue result=40 Value=cccccccc 12:02:03 SkyScan query 12:02:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:02:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:03 Parameters OK 12:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:03 Set A/D data flow result=40 12:02:03 Set A/D channel type result=40 12:02:03 Set A/D encoding result=40 12:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:03 Set channel filter=0.000000e+000 result=40 12:02:03 Config A/D Result=40 12:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:03 Get A/D filter: -9.255963e+061 result=40 12:02:03 Get A/D value=-858993460 result=40 12:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:03 Parameters OK 12:02:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:03 Set A/D data flow result=40 12:02:03 Set A/D channel type result=40 12:02:03 Set A/D encoding result=40 12:02:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:03 Set channel filter=0.000000e+000 result=40 12:02:03 Config A/D Result=40 12:02:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:03 Get A/D filter: -9.255963e+061 result=40 12:02:03 Get A/D value=-858993460 result=40 12:02:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:03 Aux= 12:02:03 Message to Camera, serial 9630 queued 12:02:34 Received message from Master: op=PointingHead serial=9637 12:02:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:02:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:02:35 Point started: ret=0 12:02:35 point_skyscan result=0 12:02:35 Check angles 12:02:35 SkyScan query 12:02:36 SkyScan query done: ret=0 az=152.61<-10174 ze=8.205<-11453 Statuses=0009 0009 12:02:36 Msec=0 True Az=152.61 Ze=8.205 Az status=0009 Ze status=0009 12:02:36 Check angles 12:02:36 SkyScan query 12:02:37 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.75<-12850 Statuses=0009 0009 12:02:37 Msec=750 True Az=135.18 Ze=-12.75 Az status=0009 Ze status=0009 12:02:37 Check angles 12:02:37 SkyScan query 12:02:37 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.675<-14245 Statuses=0009 0009 12:02:37 Msec=1500 True Az=117.6 Ze=-33.675 Az status=0009 Ze status=0009 12:02:38 Check angles 12:02:38 SkyScan query 12:02:38 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.54<-15436 Statuses=0009 0009 12:02:38 Msec=2250 True Az=100.215 Ze=-51.54 Az status=0009 Ze status=0009 12:02:38 Check angles 12:02:38 SkyScan query 12:02:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:02:39 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:02:39 Check angles 12:02:39 SkyScan query 12:02:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 12:02:40 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 12:02:40 Message to Master queued w/err=0: serial=9637 error=0 12:02:45 Received message from Master: op=Filter serial=9638 12:02:45 Color wheel filter change from 0 to 0 12:02:45 FLIGetFilterPos err=0 currentPosition=0 12:02:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:02:45 Filter is already there-color wheel unchanged 12:02:45 Received message from Master: op=Shutter serial=9639 12:02:45 Shutter LASER close 12:02:45 Received message from Camera: op=State serial=9641 12:02:45 GetSingleValue result=40 Value=cccccccc 12:02:45 SkyScan query 12:02:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:02:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:45 Parameters OK 12:02:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:45 Set A/D data flow result=40 12:02:45 Set A/D channel type result=40 12:02:45 Set A/D encoding result=40 12:02:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:45 Set channel filter=0.000000e+000 result=40 12:02:45 Config A/D Result=40 12:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:45 Get A/D filter: -9.255963e+061 result=40 12:02:45 Get A/D value=-858993460 result=40 12:02:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:02:45 Parameters OK 12:02:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:02:45 Set A/D data flow result=40 12:02:45 Set A/D channel type result=40 12:02:45 Set A/D encoding result=40 12:02:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:02:45 Set channel filter=0.000000e+000 result=40 12:02:45 Config A/D Result=40 12:02:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:02:45 Get A/D filter: -9.255963e+061 result=40 12:02:45 Get A/D value=-858993460 result=40 12:02:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:02:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:02:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:02:45 Aux= 12:02:45 Message to Camera, serial 9641 queued 12:03:16 Received message from Master: op=PointingHead serial=9648 12:03:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:03:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:03:17 Point started: ret=0 12:03:17 point_skyscan result=0 12:03:17 Check angles 12:03:17 SkyScan query 12:03:18 SkyScan query done: ret=0 az=108.93<-7262 ze=-81.225<-17415 Statuses=0009 0009 12:03:18 Msec=0 True Az=108.93 Ze=-81.225 Az status=0009 Ze status=0009 12:03:18 Check angles 12:03:18 SkyScan query 12:03:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.6<-18840 Statuses=0008 0009 12:03:19 Msec=750 True Az=113.01 Ze=-102.6 Az status=0008 Ze status=0009 12:03:19 Check angles 12:03:19 SkyScan query 12:03:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.54<-20236 Statuses=0008 0009 12:03:19 Msec=1500 True Az=113.01 Ze=-123.54 Az status=0008 Ze status=0009 12:03:20 Check angles 12:03:20 SkyScan query 12:03:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.51<-21634 Statuses=0008 0009 12:03:20 Msec=2250 True Az=112.995 Ze=-144.51 Az status=0008 Ze status=0009 12:03:20 Check angles 12:03:20 SkyScan query 12:03:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 12:03:21 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 12:03:21 Check angles 12:03:21 SkyScan query 12:03:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:03:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:03:22 Message to Master queued w/err=0: serial=9648 error=0 12:03:27 Received message from Master: op=Filter serial=9649 12:03:27 Color wheel filter change from 0 to 0 12:03:27 FLIGetFilterPos err=0 currentPosition=0 12:03:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:27 Filter is already there-color wheel unchanged 12:03:27 Received message from Master: op=Shutter serial=9650 12:03:27 Shutter LASER open 12:03:27 Received message from Camera: op=State serial=9652 12:03:27 GetSingleValue result=40 Value=cccccccc 12:03:27 SkyScan query 12:03:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:03:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:28 Parameters OK 12:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:28 Set A/D data flow result=40 12:03:28 Set A/D channel type result=40 12:03:28 Set A/D encoding result=40 12:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:28 Set channel filter=0.000000e+000 result=40 12:03:28 Config A/D Result=40 12:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:28 Get A/D filter: -9.255963e+061 result=40 12:03:28 Get A/D value=-858993460 result=40 12:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:28 Parameters OK 12:03:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:28 Set A/D data flow result=40 12:03:28 Set A/D channel type result=40 12:03:28 Set A/D encoding result=40 12:03:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:28 Set channel filter=0.000000e+000 result=40 12:03:28 Config A/D Result=40 12:03:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:28 Get A/D filter: -9.255963e+061 result=40 12:03:28 Get A/D value=-858993460 result=40 12:03:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:28 Aux= 12:03:28 Message to Camera, serial 9652 queued 12:03:30 Received message from Master: op=Shutter serial=9656 12:03:30 Shutter LASER close 12:03:31 Received message from Master: op=PointingHead serial=9660 12:03:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:03:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:03:31 Point started: ret=0 12:03:31 point_skyscan result=0 12:03:32 Check angles 12:03:32 SkyScan query 12:03:32 SkyScan query done: ret=0 az=90.27<-6018 ze=157.5<-1500 Statuses=0009 0009 12:03:32 Msec=0 True Az=90.27 Ze=157.5 Az status=0009 Ze status=0009 12:03:32 Check angles 12:03:32 SkyScan query 12:03:33 SkyScan query done: ret=0 az=72.81<-4854 ze=136.575<-2895 Statuses=0009 0009 12:03:33 Msec=750 True Az=72.81 Ze=136.575 Az status=0009 Ze status=0009 12:03:33 Check angles 12:03:33 SkyScan query 12:03:34 SkyScan query done: ret=0 az=55.17<-3678 ze=115.575<-4295 Statuses=0009 0009 12:03:34 Msec=1500 True Az=55.17 Ze=115.575 Az status=0009 Ze status=0009 12:03:34 Check angles 12:03:34 SkyScan query 12:03:34 SkyScan query done: ret=0 az=40.95<-2730 ze=94.65<-5690 Statuses=0009 0009 12:03:34 Msec=2250 True Az=40.95 Ze=94.65 Az status=0009 Ze status=0009 12:03:35 Check angles 12:03:35 SkyScan query 12:03:35 SkyScan query done: ret=0 az=41.01<-2734 ze=73.245<-7117 Statuses=0008 0009 12:03:35 Msec=3000 True Az=41.01 Ze=73.245 Az status=0008 Ze status=0009 12:03:35 Check angles 12:03:35 SkyScan query 12:03:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 12:03:36 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 12:03:36 Check angles 12:03:36 SkyScan query 12:03:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:03:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:03:37 Message to Master queued w/err=0: serial=9660 error=0 12:03:42 Received message from Master: op=Filter serial=9661 12:03:42 Color wheel filter change from 0 to 0 12:03:42 FLIGetFilterPos err=0 currentPosition=0 12:03:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:03:42 Filter is already there-color wheel unchanged 12:03:42 Received message from Master: op=Shutter serial=9662 12:03:42 Shutter LASER close 12:03:42 Received message from Camera: op=State serial=9664 12:03:42 GetSingleValue result=40 Value=cccccccc 12:03:42 SkyScan query 12:03:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:03:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:43 Parameters OK 12:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:43 Set A/D data flow result=40 12:03:43 Set A/D channel type result=40 12:03:43 Set A/D encoding result=40 12:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:43 Set channel filter=0.000000e+000 result=40 12:03:43 Config A/D Result=40 12:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:43 Get A/D filter: -9.255963e+061 result=40 12:03:43 Get A/D value=-858993460 result=40 12:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:03:43 Parameters OK 12:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:03:43 Set A/D data flow result=40 12:03:43 Set A/D channel type result=40 12:03:43 Set A/D encoding result=40 12:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:03:43 Set channel filter=0.000000e+000 result=40 12:03:43 Config A/D Result=40 12:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:03:43 Get A/D filter: -9.255963e+061 result=40 12:03:43 Get A/D value=-858993460 result=40 12:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:03:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:03:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:03:43 Aux= 12:03:43 Message to Camera, serial 9664 queued 12:04:14 Received message from Master: op=PointingHead serial=9671 12:04:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:04:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:04:14 Point started: ret=0 12:04:14 point_skyscan result=0 12:04:15 Check angles 12:04:15 SkyScan query 12:04:15 SkyScan query done: ret=0 az=64.065<-4271 ze=66.54<-7564 Statuses=0009 0008 12:04:15 Msec=0 True Az=64.065 Ze=66.54 Az status=0009 Ze status=0008 12:04:15 Check angles 12:04:15 SkyScan query 12:04:16 SkyScan query done: ret=0 az=82.095<-5473 ze=66.51<-7566 Statuses=0009 0008 12:04:16 Msec=750 True Az=82.095 Ze=66.51 Az status=0009 Ze status=0008 12:04:16 Check angles 12:04:16 SkyScan query 12:04:17 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 12:04:17 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 12:04:17 Check angles 12:04:17 SkyScan query 12:04:17 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 12:04:17 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 12:04:18 Check angles 12:04:18 SkyScan query 12:04:18 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 12:04:18 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 12:04:18 Check angles 12:04:18 SkyScan query 12:04:19 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 12:04:19 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 12:04:19 Check angles 12:04:19 SkyScan query 12:04:20 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:04:20 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:04:20 Message to Master queued w/err=0: serial=9671 error=0 12:04:25 Received message from Master: op=Filter serial=9672 12:04:25 Color wheel filter change from 0 to 0 12:04:25 FLIGetFilterPos err=0 currentPosition=0 12:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:04:25 Filter is already there-color wheel unchanged 12:04:25 Received message from Master: op=Shutter serial=9673 12:04:25 Shutter LASER close 12:04:25 Received message from Camera: op=State serial=9675 12:04:25 GetSingleValue result=40 Value=cccccccc 12:04:25 SkyScan query 12:04:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:04:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:26 Parameters OK 12:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:26 Set A/D data flow result=40 12:04:26 Set A/D channel type result=40 12:04:26 Set A/D encoding result=40 12:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:26 Set channel filter=0.000000e+000 result=40 12:04:26 Config A/D Result=40 12:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:26 Get A/D filter: -9.255963e+061 result=40 12:04:26 Get A/D value=-858993460 result=40 12:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:04:26 Parameters OK 12:04:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:04:26 Set A/D data flow result=40 12:04:26 Set A/D channel type result=40 12:04:26 Set A/D encoding result=40 12:04:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:04:26 Set channel filter=0.000000e+000 result=40 12:04:26 Config A/D Result=40 12:04:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:04:26 Get A/D filter: -9.255963e+061 result=40 12:04:26 Get A/D value=-858993460 result=40 12:04:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:04:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:04:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:04:26 Aux= 12:04:26 Message to Camera, serial 9675 queued 12:04:56 Received message from Master: op=PointingHead serial=9682 12:04:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:04:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:04:57 Point started: ret=0 12:04:57 point_skyscan result=0 12:04:58 Check angles 12:04:58 SkyScan query 12:04:58 SkyScan query done: ret=0 az=134.64<-8976 ze=36.255<-9583 Statuses=0009 0009 12:04:58 Msec=0 True Az=134.64 Ze=36.255 Az status=0009 Ze status=0009 12:04:58 Check angles 12:04:58 SkyScan query 12:04:59 SkyScan query done: ret=0 az=117.075<-7805 ze=15.3<-10980 Statuses=0009 0009 12:04:59 Msec=750 True Az=117.075 Ze=15.3 Az status=0009 Ze status=0009 12:04:59 Check angles 12:04:59 SkyScan query 12:05:00 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.67<-12378 Statuses=0009 0009 12:05:00 Msec=1500 True Az=99.825 Ze=-5.67 Az status=0009 Ze status=0009 12:05:00 Check angles 12:05:00 SkyScan query 12:05:00 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.03<-13802 Statuses=0009 0009 12:05:00 Msec=2250 True Az=81.96 Ze=-27.03 Az status=0009 Ze status=0009 12:05:01 Check angles 12:05:01 SkyScan query 12:05:01 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 12:05:01 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 12:05:01 Check angles 12:05:01 SkyScan query 12:05:02 SkyScan query done: ret=0 az=46.59<-3106 ze=-38.52<-14568 Statuses=0009 0008 12:05:02 Msec=3750 True Az=46.59 Ze=-38.52 Az status=0009 Ze status=0008 12:05:02 Check angles 12:05:02 SkyScan query 12:05:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:05:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:05:03 Message to Master queued w/err=0: serial=9682 error=0 12:05:08 Received message from Master: op=Filter serial=9683 12:05:08 Color wheel filter change from 0 to 0 12:05:08 FLIGetFilterPos err=0 currentPosition=0 12:05:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:08 Filter is already there-color wheel unchanged 12:05:08 Received message from Master: op=Shutter serial=9684 12:05:08 Shutter LASER close 12:05:08 Received message from Camera: op=State serial=9686 12:05:08 GetSingleValue result=40 Value=cccccccc 12:05:08 SkyScan query 12:05:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:05:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:08 Parameters OK 12:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:08 Set A/D data flow result=40 12:05:08 Set A/D channel type result=40 12:05:08 Set A/D encoding result=40 12:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:08 Set channel filter=0.000000e+000 result=40 12:05:08 Config A/D Result=40 12:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:08 Get A/D filter: -9.255963e+061 result=40 12:05:08 Get A/D value=-858993460 result=40 12:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:08 Parameters OK 12:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:08 Set A/D data flow result=40 12:05:08 Set A/D channel type result=40 12:05:08 Set A/D encoding result=40 12:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:08 Set channel filter=0.000000e+000 result=40 12:05:08 Config A/D Result=40 12:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:08 Get A/D filter: -9.255963e+061 result=40 12:05:08 Get A/D value=-858993460 result=40 12:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:08 Aux= 12:05:08 Message to Camera, serial 9686 queued 12:05:39 Received message from Master: op=PointingHead serial=9693 12:05:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:05:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:05:40 Point started: ret=0 12:05:40 point_skyscan result=0 12:05:40 Check angles 12:05:40 SkyScan query 12:05:41 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.85<-16590 Statuses=0009 0009 12:05:41 Msec=0 True Az=64.395 Ze=-68.85 Az status=0009 Ze status=0009 12:05:41 Check angles 12:05:41 SkyScan query 12:05:42 SkyScan query done: ret=0 az=82.455<-5497 ze=-90.255<-18017 Statuses=0009 0009 12:05:42 Msec=750 True Az=82.455 Ze=-90.255 Az status=0009 Ze status=0009 12:05:42 Check angles 12:05:42 SkyScan query 12:05:43 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.195<-19413 Statuses=0009 0009 12:05:43 Msec=1500 True Az=99.765 Ze=-111.195 Az status=0009 Ze status=0009 12:05:43 Check angles 12:05:43 SkyScan query 12:05:43 SkyScan query done: ret=0 az=117.24<-7816 ze=-132.15<-20810 Statuses=0009 0009 12:05:43 Msec=2250 True Az=117.24 Ze=-132.15 Az status=0009 Ze status=0009 12:05:43 Check angles 12:05:43 SkyScan query 12:05:44 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 12:05:44 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 12:05:44 Check angles 12:05:44 SkyScan query 12:05:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:05:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:05:45 Message to Master queued w/err=0: serial=9693 error=0 12:05:50 Received message from Master: op=Filter serial=9694 12:05:50 Color wheel filter change from 0 to 0 12:05:50 FLIGetFilterPos err=0 currentPosition=0 12:05:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:05:50 Filter is already there-color wheel unchanged 12:05:50 Received message from Master: op=Shutter serial=9695 12:05:50 Shutter LASER close 12:05:50 Received message from Camera: op=State serial=9697 12:05:50 GetSingleValue result=40 Value=cccccccc 12:05:50 SkyScan query 12:05:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:05:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:51 Parameters OK 12:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:51 Set A/D data flow result=40 12:05:51 Set A/D channel type result=40 12:05:51 Set A/D encoding result=40 12:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:51 Set channel filter=0.000000e+000 result=40 12:05:51 Config A/D Result=40 12:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:51 Get A/D filter: -9.255963e+061 result=40 12:05:51 Get A/D value=-858993460 result=40 12:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:05:51 Parameters OK 12:05:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:05:51 Set A/D data flow result=40 12:05:51 Set A/D channel type result=40 12:05:51 Set A/D encoding result=40 12:05:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:05:51 Set channel filter=0.000000e+000 result=40 12:05:51 Config A/D Result=40 12:05:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:05:51 Get A/D filter: -9.255963e+061 result=40 12:05:51 Get A/D value=-858993460 result=40 12:05:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:05:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:05:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:05:51 Aux= 12:05:51 Message to Camera, serial 9697 queued 12:06:21 Received message from Master: op=PointingHead serial=9704 12:06:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:06:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:06:22 Point started: ret=0 12:06:22 point_skyscan result=0 12:06:23 Check angles 12:06:23 SkyScan query 12:06:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 12:06:23 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 12:06:23 Check angles 12:06:23 SkyScan query 12:06:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:06:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:06:24 Message to Master queued w/err=0: serial=9704 error=0 12:06:29 Received message from Master: op=Filter serial=9705 12:06:29 Color wheel filter change from 0 to 0 12:06:29 FLIGetFilterPos err=0 currentPosition=0 12:06:29 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:29 Filter is already there-color wheel unchanged 12:06:29 Received message from Master: op=Shutter serial=9706 12:06:29 Shutter LASER open 12:06:29 Received message from Camera: op=State serial=9708 12:06:29 GetSingleValue result=40 Value=cccccccc 12:06:29 SkyScan query 12:06:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:06:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:30 Parameters OK 12:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:30 Set A/D data flow result=40 12:06:30 Set A/D channel type result=40 12:06:30 Set A/D encoding result=40 12:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:30 Set channel filter=0.000000e+000 result=40 12:06:30 Config A/D Result=40 12:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:30 Get A/D filter: -9.255963e+061 result=40 12:06:30 Get A/D value=-858993460 result=40 12:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:30 Parameters OK 12:06:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:30 Set A/D data flow result=40 12:06:30 Set A/D channel type result=40 12:06:30 Set A/D encoding result=40 12:06:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:30 Set channel filter=0.000000e+000 result=40 12:06:30 Config A/D Result=40 12:06:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:30 Get A/D filter: -9.255963e+061 result=40 12:06:30 Get A/D value=-858993460 result=40 12:06:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:30 Aux= 12:06:30 Message to Camera, serial 9708 queued 12:06:32 Received message from Master: op=Shutter serial=9712 12:06:32 Shutter LASER close 12:06:33 Received message from Master: op=PointingHead serial=9716 12:06:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:06:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:06:33 Point started: ret=0 12:06:33 point_skyscan result=0 12:06:34 Check angles 12:06:34 SkyScan query 12:06:35 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.295<-21553 Statuses=0009 0009 12:06:35 Msec=0 True Az=135.93 Ze=-143.295 Az status=0009 Ze status=0009 12:06:35 Check angles 12:06:35 SkyScan query 12:06:35 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.89<-20126 Statuses=0009 0009 12:06:35 Msec=750 True Az=153.855 Ze=-121.89 Az status=0009 Ze status=0009 12:06:36 Check angles 12:06:36 SkyScan query 12:06:36 SkyScan query done: ret=0 az=171.69<-11446 ze=-100.515<-18701 Statuses=0009 0009 12:06:36 Msec=1500 True Az=171.69 Ze=-100.515 Az status=0009 Ze status=0009 12:06:36 Check angles 12:06:36 SkyScan query 12:06:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.56<-17304 Statuses=0008 0009 12:06:37 Msec=2250 True Az=176.01 Ze=-79.56 Az status=0008 Ze status=0009 12:06:37 Check angles 12:06:37 SkyScan query 12:06:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.575<-15905 Statuses=0008 0009 12:06:38 Msec=3000 True Az=175.995 Ze=-58.575 Az status=0008 Ze status=0009 12:06:38 Check angles 12:06:38 SkyScan query 12:06:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:06:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:06:38 Message to Master queued w/err=0: serial=9716 error=0 12:06:43 Received message from Master: op=Filter serial=9717 12:06:43 Color wheel filter change from 0 to 0 12:06:43 FLIGetFilterPos err=0 currentPosition=0 12:06:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:06:43 Filter is already there-color wheel unchanged 12:06:44 Received message from Master: op=Shutter serial=9718 12:06:44 Shutter LASER close 12:06:44 Received message from Camera: op=State serial=9720 12:06:44 GetSingleValue result=40 Value=cccccccc 12:06:44 SkyScan query 12:06:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:06:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:44 Parameters OK 12:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:44 Set A/D data flow result=40 12:06:44 Set A/D channel type result=40 12:06:44 Set A/D encoding result=40 12:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:44 Set channel filter=0.000000e+000 result=40 12:06:44 Config A/D Result=40 12:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:44 Get A/D filter: -9.255963e+061 result=40 12:06:44 Get A/D value=-858993460 result=40 12:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:06:44 Parameters OK 12:06:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:06:44 Set A/D data flow result=40 12:06:44 Set A/D channel type result=40 12:06:44 Set A/D encoding result=40 12:06:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:06:44 Set channel filter=0.000000e+000 result=40 12:06:44 Config A/D Result=40 12:06:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:06:44 Get A/D filter: -9.255963e+061 result=40 12:06:44 Get A/D value=-858993460 result=40 12:06:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:06:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:06:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:06:44 Aux= 12:06:44 Message to Camera, serial 9720 queued 12:07:15 Received message from Master: op=PointingHead serial=9727 12:07:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:07:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:07:16 Point started: ret=0 12:07:16 point_skyscan result=0 12:07:16 Check angles 12:07:16 SkyScan query 12:07:17 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.42<-13428 Statuses=0009 0009 12:07:17 Msec=0 True Az=152.76 Ze=-21.42 Az status=0009 Ze status=0009 12:07:17 Check angles 12:07:17 SkyScan query 12:07:18 SkyScan query done: ret=0 az=135.15<-9010 ze=-0.45<-12030 Statuses=0009 0009 12:07:18 Msec=750 True Az=135.15 Ze=-0.45 Az status=0009 Ze status=0009 12:07:18 Check angles 12:07:18 SkyScan query 12:07:18 SkyScan query done: ret=0 az=117.66<-7844 ze=20.49<-10634 Statuses=0009 0009 12:07:18 Msec=1500 True Az=117.66 Ze=20.49 Az status=0009 Ze status=0009 12:07:19 Check angles 12:07:19 SkyScan query 12:07:19 SkyScan query done: ret=0 az=100.26<-6684 ze=41.445<-9237 Statuses=0009 0009 12:07:19 Msec=2250 True Az=100.26 Ze=41.445 Az status=0009 Ze status=0009 12:07:19 Check angles 12:07:19 SkyScan query 12:07:20 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:07:20 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:07:20 Check angles 12:07:20 SkyScan query 12:07:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:07:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:07:21 Message to Master queued w/err=0: serial=9727 error=0 12:07:26 Received message from Master: op=Filter serial=9728 12:07:26 Color wheel filter change from 0 to 0 12:07:26 FLIGetFilterPos err=0 currentPosition=0 12:07:26 FLIGetStepsRemaining err=0 RemainingSteps=0 12:07:26 Filter is already there-color wheel unchanged 12:07:26 Received message from Master: op=Shutter serial=9729 12:07:26 Shutter LASER close 12:07:26 Received message from Camera: op=State serial=9731 12:07:26 GetSingleValue result=40 Value=cccccccc 12:07:26 SkyScan query 12:07:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:07:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:26 Parameters OK 12:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:26 Set A/D data flow result=40 12:07:26 Set A/D channel type result=40 12:07:26 Set A/D encoding result=40 12:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:26 Set channel filter=0.000000e+000 result=40 12:07:26 Config A/D Result=40 12:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:26 Get A/D filter: -9.255963e+061 result=40 12:07:26 Get A/D value=-858993460 result=40 12:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:07:26 Parameters OK 12:07:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:07:26 Set A/D data flow result=40 12:07:26 Set A/D channel type result=40 12:07:26 Set A/D encoding result=40 12:07:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:07:26 Set channel filter=0.000000e+000 result=40 12:07:26 Config A/D Result=40 12:07:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:07:26 Get A/D filter: -9.255963e+061 result=40 12:07:26 Get A/D value=-858993460 result=40 12:07:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:07:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:07:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:07:26 Aux= 12:07:26 Message to Camera, serial 9731 queued 12:07:57 Received message from Master: op=PointingHead serial=9738 12:07:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:07:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:07:58 Point started: ret=0 12:07:58 point_skyscan result=0 12:07:58 Check angles 12:07:58 SkyScan query 12:07:59 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 12:07:59 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 12:07:59 Check angles 12:07:59 SkyScan query 12:08:00 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 12:08:00 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 12:08:00 Check angles 12:08:00 SkyScan query 12:08:00 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 12:08:00 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 12:08:01 Check angles 12:08:01 SkyScan query 12:08:01 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 12:08:01 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 12:08:01 Check angles 12:08:01 SkyScan query 12:08:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 12:08:02 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 12:08:02 Check angles 12:08:02 SkyScan query 12:08:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:08:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:08:03 Message to Master queued w/err=0: serial=9738 error=0 12:08:08 Received message from Master: op=Filter serial=9739 12:08:08 Color wheel filter change from 0 to 0 12:08:08 FLIGetFilterPos err=0 currentPosition=0 12:08:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:08 Filter is already there-color wheel unchanged 12:08:08 Received message from Master: op=Shutter serial=9740 12:08:08 Shutter LASER close 12:08:08 Received message from Camera: op=State serial=9742 12:08:08 GetSingleValue result=40 Value=cccccccc 12:08:08 SkyScan query 12:08:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:08:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:08 Parameters OK 12:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:08 Set A/D data flow result=40 12:08:08 Set A/D channel type result=40 12:08:08 Set A/D encoding result=40 12:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:08 Set channel filter=0.000000e+000 result=40 12:08:08 Config A/D Result=40 12:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:08 Get A/D filter: -9.255963e+061 result=40 12:08:08 Get A/D value=-858993460 result=40 12:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:08 Parameters OK 12:08:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:08 Set A/D data flow result=40 12:08:08 Set A/D channel type result=40 12:08:08 Set A/D encoding result=40 12:08:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:08 Set channel filter=0.000000e+000 result=40 12:08:08 Config A/D Result=40 12:08:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:08 Get A/D filter: -9.255963e+061 result=40 12:08:08 Get A/D value=-858993460 result=40 12:08:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:08 Aux= 12:08:08 Message to Camera, serial 9742 queued 12:08:39 Received message from Master: op=PointingHead serial=9749 12:08:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:08:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:08:40 Point started: ret=0 12:08:40 point_skyscan result=0 12:08:40 Check angles 12:08:40 SkyScan query 12:08:41 SkyScan query done: ret=0 az=152.76<-10184 ze=8.385<-11441 Statuses=0009 0009 12:08:41 Msec=0 True Az=152.76 Ze=8.385 Az status=0009 Ze status=0009 12:08:41 Check angles 12:08:41 SkyScan query 12:08:42 SkyScan query done: ret=0 az=134.925<-8995 ze=-13.005<-12867 Statuses=0009 0009 12:08:42 Msec=750 True Az=134.925 Ze=-13.005 Az status=0009 Ze status=0009 12:08:42 Check angles 12:08:42 SkyScan query 12:08:43 SkyScan query done: ret=0 az=117.42<-7828 ze=-33.93<-14262 Statuses=0009 0009 12:08:43 Msec=1500 True Az=117.42 Ze=-33.93 Az status=0009 Ze status=0009 12:08:43 Check angles 12:08:43 SkyScan query 12:08:43 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 12:08:43 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 12:08:43 Check angles 12:08:43 SkyScan query 12:08:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 12:08:44 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 12:08:44 Check angles 12:08:44 SkyScan query 12:08:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:08:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:08:45 Message to Master queued w/err=0: serial=9749 error=0 12:08:50 Received message from Master: op=Filter serial=9750 12:08:50 Color wheel filter change from 0 to 0 12:08:50 FLIGetFilterPos err=0 currentPosition=0 12:08:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:08:50 Filter is already there-color wheel unchanged 12:08:50 Received message from Master: op=Shutter serial=9751 12:08:50 Shutter LASER close 12:08:50 Received message from Camera: op=State serial=9753 12:08:50 GetSingleValue result=40 Value=cccccccc 12:08:50 SkyScan query 12:08:51 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:08:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:51 Parameters OK 12:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:51 Set A/D data flow result=40 12:08:51 Set A/D channel type result=40 12:08:51 Set A/D encoding result=40 12:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:51 Set channel filter=0.000000e+000 result=40 12:08:51 Config A/D Result=40 12:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:51 Get A/D filter: -9.255963e+061 result=40 12:08:51 Get A/D value=-858993460 result=40 12:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:08:51 Parameters OK 12:08:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:08:51 Set A/D data flow result=40 12:08:51 Set A/D channel type result=40 12:08:51 Set A/D encoding result=40 12:08:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:08:51 Set channel filter=0.000000e+000 result=40 12:08:51 Config A/D Result=40 12:08:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:08:51 Get A/D filter: -9.255963e+061 result=40 12:08:51 Get A/D value=-858993460 result=40 12:08:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:08:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:08:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:08:51 Aux= 12:08:51 Message to Camera, serial 9753 queued 12:09:21 Received message from Master: op=PointingHead serial=9760 12:09:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:09:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:09:22 Point started: ret=0 12:09:22 point_skyscan result=0 12:09:23 Check angles 12:09:23 SkyScan query 12:09:23 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.765<-17451 Statuses=0009 0009 12:09:23 Msec=0 True Az=109.365 Ze=-81.765 Az status=0009 Ze status=0009 12:09:23 Check angles 12:09:23 SkyScan query 12:09:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.14<-18876 Statuses=0008 0009 12:09:24 Msec=750 True Az=112.995 Ze=-103.14 Az status=0008 Ze status=0009 12:09:24 Check angles 12:09:24 SkyScan query 12:09:25 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.095<-20273 Statuses=0008 0009 12:09:25 Msec=1500 True Az=113.01 Ze=-124.095 Az status=0008 Ze status=0009 12:09:25 Check angles 12:09:25 SkyScan query 12:09:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.065<-21671 Statuses=0008 0009 12:09:25 Msec=2250 True Az=112.995 Ze=-145.065 Az status=0008 Ze status=0009 12:09:26 Check angles 12:09:26 SkyScan query 12:09:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.99<-23066 Statuses=0008 0009 12:09:26 Msec=3000 True Az=112.995 Ze=-165.99 Az status=0008 Ze status=0009 12:09:26 Check angles 12:09:26 SkyScan query 12:09:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:09:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:09:27 Message to Master queued w/err=0: serial=9760 error=0 12:09:32 Received message from Master: op=Filter serial=9761 12:09:32 Color wheel filter change from 0 to 0 12:09:32 FLIGetFilterPos err=0 currentPosition=0 12:09:32 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:32 Filter is already there-color wheel unchanged 12:09:32 Received message from Master: op=Shutter serial=9762 12:09:32 Shutter LASER open 12:09:32 Received message from Camera: op=State serial=9764 12:09:32 GetSingleValue result=40 Value=cccccccc 12:09:32 SkyScan query 12:09:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:09:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:33 Parameters OK 12:09:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:33 Set A/D data flow result=40 [UTC 2018-12-4 12:09:33] 12:09:33 Set A/D channel type result=40 12:09:33 Set A/D encoding result=40 12:09:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:33 Set channel filter=0.000000e+000 result=40 12:09:33 Config A/D Result=40 12:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:33 Get A/D filter: -9.255963e+061 result=40 12:09:33 Get A/D value=-858993460 result=40 12:09:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:33 Parameters OK 12:09:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:33 Set A/D data flow result=40 12:09:33 Set A/D channel type result=40 12:09:33 Set A/D encoding result=40 12:09:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:33 Set channel filter=0.000000e+000 result=40 12:09:33 Config A/D Result=40 12:09:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:33 Get A/D filter: -9.255963e+061 result=40 12:09:33 Get A/D value=-858993460 result=40 12:09:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:33 Aux= 12:09:33 Message to Camera, serial 9764 queued 12:09:35 Received message from Master: op=Shutter serial=9768 12:09:35 Shutter LASER close 12:09:36 Received message from Master: op=PointingHead serial=9772 12:09:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:09:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:09:36 Point started: ret=0 12:09:36 point_skyscan result=0 12:09:37 Check angles 12:09:37 SkyScan query 12:09:37 SkyScan query done: ret=0 az=89.64<-5976 ze=156.84<-1544 Statuses=0009 0009 12:09:37 Msec=0 True Az=89.64 Ze=156.84 Az status=0009 Ze status=0009 12:09:38 Check angles 12:09:38 SkyScan query 12:09:38 SkyScan query done: ret=0 az=72.15<-4810 ze=135.855<-2943 Statuses=0009 0009 12:09:38 Msec=750 True Az=72.15 Ze=135.855 Az status=0009 Ze status=0009 12:09:38 Check angles 12:09:38 SkyScan query 12:09:39 SkyScan query done: ret=0 az=54.435<-3629 ze=114.48<-4368 Statuses=0009 0009 12:09:39 Msec=1500 True Az=54.435 Ze=114.48 Az status=0009 Ze status=0009 12:09:39 Check angles 12:09:39 SkyScan query 12:09:40 SkyScan query done: ret=0 az=40.905<-2727 ze=93.525<-5765 Statuses=0009 0009 12:09:40 Msec=2250 True Az=40.905 Ze=93.525 Az status=0009 Ze status=0009 12:09:40 Check angles 12:09:40 SkyScan query 12:09:40 SkyScan query done: ret=0 az=40.995<-2733 ze=72.57<-7162 Statuses=0008 0009 12:09:40 Msec=3000 True Az=40.995 Ze=72.57 Az status=0008 Ze status=0009 12:09:41 Check angles 12:09:41 SkyScan query 12:09:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 12:09:41 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 12:09:41 Check angles 12:09:41 SkyScan query 12:09:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:09:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:09:42 Message to Master queued w/err=0: serial=9772 error=0 12:09:47 Received message from Master: op=Filter serial=9773 12:09:47 Color wheel filter change from 0 to 0 12:09:47 FLIGetFilterPos err=0 currentPosition=0 12:09:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:09:47 Filter is already there-color wheel unchanged 12:09:47 Received message from Master: op=Shutter serial=9774 12:09:47 Shutter LASER close 12:09:47 Received message from Camera: op=State serial=9776 12:09:47 GetSingleValue result=40 Value=cccccccc 12:09:47 SkyScan query 12:09:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:09:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:48 Parameters OK 12:09:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:48 Set A/D data flow result=40 12:09:48 Set A/D channel type result=40 12:09:48 Set A/D encoding result=40 12:09:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:48 Set channel filter=0.000000e+000 result=40 12:09:48 Config A/D Result=40 12:09:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:48 Get A/D filter: -9.255963e+061 result=40 12:09:48 Get A/D value=-858993460 result=40 12:09:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:09:48 Parameters OK 12:09:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:09:48 Set A/D data flow result=40 12:09:48 Set A/D channel type result=40 12:09:48 Set A/D encoding result=40 12:09:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:09:48 Set channel filter=0.000000e+000 result=40 12:09:48 Config A/D Result=40 12:09:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:09:48 Get A/D filter: -9.255963e+061 result=40 12:09:48 Get A/D value=-858993460 result=40 12:09:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:09:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:09:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:09:48 Aux= 12:09:48 Message to Camera, serial 9776 queued 12:10:19 Received message from Master: op=PointingHead serial=9783 12:10:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:10:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:10:19 Point started: ret=0 12:10:19 point_skyscan result=0 12:10:20 Check angles 12:10:20 SkyScan query 12:10:20 SkyScan query done: ret=0 az=63.78<-4252 ze=66.555<-7563 Statuses=0009 0008 12:10:20 Msec=0 True Az=63.78 Ze=66.555 Az status=0009 Ze status=0008 12:10:20 Check angles 12:10:20 SkyScan query 12:10:21 SkyScan query done: ret=0 az=81.075<-5405 ze=66.51<-7566 Statuses=0009 0008 12:10:21 Msec=750 True Az=81.075 Ze=66.51 Az status=0009 Ze status=0008 12:10:21 Check angles 12:10:21 SkyScan query 12:10:22 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 12:10:22 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 12:10:22 Check angles 12:10:22 SkyScan query 12:10:23 SkyScan query done: ret=0 az=116.58<-7772 ze=66.495<-7567 Statuses=0009 0008 12:10:23 Msec=2250 True Az=116.58 Ze=66.495 Az status=0009 Ze status=0008 12:10:23 Check angles 12:10:23 SkyScan query 12:10:23 SkyScan query done: ret=0 az=134.115<-8941 ze=66.495<-7567 Statuses=0009 0008 12:10:23 Msec=3000 True Az=134.115 Ze=66.495 Az status=0009 Ze status=0008 12:10:24 Check angles 12:10:24 SkyScan query 12:10:24 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 12:10:24 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 12:10:24 Check angles 12:10:24 SkyScan query 12:10:25 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:10:25 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:10:25 Message to Master queued w/err=0: serial=9783 error=0 12:10:30 Received message from Master: op=Filter serial=9784 12:10:30 Color wheel filter change from 0 to 0 12:10:30 FLIGetFilterPos err=0 currentPosition=0 12:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:10:30 Filter is already there-color wheel unchanged 12:10:30 Received message from Master: op=Shutter serial=9785 12:10:30 Shutter LASER close 12:10:30 Received message from Camera: op=State serial=9787 12:10:30 GetSingleValue result=40 Value=cccccccc 12:10:30 SkyScan query 12:10:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:31 Parameters OK 12:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:31 Set A/D data flow result=40 12:10:31 Set A/D channel type result=40 12:10:31 Set A/D encoding result=40 12:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:31 Set channel filter=0.000000e+000 result=40 12:10:31 Config A/D Result=40 12:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:31 Get A/D filter: -9.255963e+061 result=40 12:10:31 Get A/D value=-858993460 result=40 12:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:10:31 Parameters OK 12:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:10:31 Set A/D data flow result=40 12:10:31 Set A/D channel type result=40 12:10:31 Set A/D encoding result=40 12:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:10:31 Set channel filter=0.000000e+000 result=40 12:10:31 Config A/D Result=40 12:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:10:31 Get A/D filter: -9.255963e+061 result=40 12:10:31 Get A/D value=-858993460 result=40 12:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:10:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:10:31 Aux= 12:10:31 Message to Camera, serial 9787 queued 12:11:02 Received message from Master: op=PointingHead serial=9794 12:11:02 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:11:02 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:11:02 Point started: ret=0 12:11:02 point_skyscan result=0 12:11:03 Check angles 12:11:03 SkyScan query 12:11:03 SkyScan query done: ret=0 az=135.255<-9017 ze=36.975<-9535 Statuses=0009 0009 12:11:03 Msec=0 True Az=135.255 Ze=36.975 Az status=0009 Ze status=0009 12:11:03 Check angles 12:11:03 SkyScan query 12:11:04 SkyScan query done: ret=0 az=117.78<-7852 ze=16.02<-10932 Statuses=0009 0009 12:11:04 Msec=750 True Az=117.78 Ze=16.02 Az status=0009 Ze status=0009 12:11:04 Check angles 12:11:04 SkyScan query 12:11:05 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.37<-12358 Statuses=0009 0009 12:11:05 Msec=1500 True Az=99.945 Ze=-5.37 Az status=0009 Ze status=0009 12:11:05 Check angles 12:11:05 SkyScan query 12:11:06 SkyScan query done: ret=0 az=82.125<-5475 ze=-26.775<-13785 Statuses=0009 0009 12:11:06 Msec=2250 True Az=82.125 Ze=-26.775 Az status=0009 Ze status=0009 12:11:06 Check angles 12:11:06 SkyScan query 12:11:06 SkyScan query done: ret=0 az=64.68<-4312 ze=-38.565<-14571 Statuses=0009 0008 12:11:06 Msec=3000 True Az=64.68 Ze=-38.565 Az status=0009 Ze status=0008 12:11:06 Check angles 12:11:06 SkyScan query 12:11:07 SkyScan query done: ret=0 az=46.83<-3122 ze=-38.535<-14569 Statuses=0009 0008 12:11:07 Msec=3750 True Az=46.83 Ze=-38.535 Az status=0009 Ze status=0008 12:11:07 Check angles 12:11:07 SkyScan query 12:11:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:11:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:11:08 Message to Master queued w/err=0: serial=9794 error=0 12:11:13 Received message from Master: op=Filter serial=9795 12:11:13 Color wheel filter change from 0 to 0 12:11:13 FLIGetFilterPos err=0 currentPosition=0 12:11:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:13 Filter is already there-color wheel unchanged 12:11:13 Received message from Master: op=Shutter serial=9796 12:11:13 Shutter LASER close 12:11:13 Received message from Camera: op=State serial=9798 12:11:13 GetSingleValue result=40 Value=cccccccc 12:11:13 SkyScan query 12:11:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:11:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:14 Parameters OK 12:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:14 Set A/D data flow result=40 12:11:14 Set A/D channel type result=40 12:11:14 Set A/D encoding result=40 12:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:14 Set channel filter=0.000000e+000 result=40 12:11:14 Config A/D Result=40 12:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:14 Get A/D filter: -9.255963e+061 result=40 12:11:14 Get A/D value=-858993460 result=40 12:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:14 Parameters OK 12:11:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:14 Set A/D data flow result=40 12:11:14 Set A/D channel type result=40 12:11:14 Set A/D encoding result=40 12:11:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:14 Set channel filter=0.000000e+000 result=40 12:11:14 Config A/D Result=40 12:11:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:14 Get A/D filter: -9.255963e+061 result=40 12:11:14 Get A/D value=-858993460 result=40 12:11:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:14 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:14 Aux= 12:11:14 Message to Camera, serial 9798 queued 12:11:44 Received message from Master: op=PointingHead serial=9805 12:11:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:11:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:11:45 Point started: ret=0 12:11:45 point_skyscan result=0 12:11:46 Check angles 12:11:46 SkyScan query 12:11:46 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.28<-16552 Statuses=0009 0009 12:11:46 Msec=0 True Az=63.96 Ze=-68.28 Az status=0009 Ze status=0009 12:11:46 Check angles 12:11:46 SkyScan query 12:11:47 SkyScan query done: ret=0 az=81.585<-5439 ze=-89.25<-17950 Statuses=0009 0009 12:11:47 Msec=750 True Az=81.585 Ze=-89.25 Az status=0009 Ze status=0009 12:11:47 Check angles 12:11:47 SkyScan query 12:11:48 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.625<-19375 Statuses=0009 0009 12:11:48 Msec=1500 True Az=99.36 Ze=-110.625 Az status=0009 Ze status=0009 12:11:48 Check angles 12:11:48 SkyScan query 12:11:48 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.565<-20771 Statuses=0009 0009 12:11:48 Msec=2250 True Az=116.805 Ze=-131.565 Az status=0009 Ze status=0009 12:11:49 Check angles 12:11:49 SkyScan query 12:11:49 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 12:11:49 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 12:11:49 Check angles 12:11:49 SkyScan query 12:11:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:11:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:11:50 Message to Master queued w/err=0: serial=9805 error=0 12:11:55 Received message from Master: op=Filter serial=9806 12:11:55 Color wheel filter change from 0 to 0 12:11:55 FLIGetFilterPos err=0 currentPosition=0 12:11:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:11:55 Filter is already there-color wheel unchanged 12:11:55 Received message from Master: op=Shutter serial=9807 12:11:55 Shutter LASER close 12:11:55 Received message from Camera: op=State serial=9809 12:11:55 GetSingleValue result=40 Value=cccccccc 12:11:55 SkyScan query 12:11:56 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:11:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:56 Parameters OK 12:11:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:56 Set A/D data flow result=40 12:11:56 Set A/D channel type result=40 12:11:56 Set A/D encoding result=40 12:11:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:56 Set channel filter=0.000000e+000 result=40 12:11:56 Config A/D Result=40 12:11:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:56 Get A/D filter: -9.255963e+061 result=40 12:11:56 Get A/D value=-858993460 result=40 12:11:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:11:56 Parameters OK 12:11:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:11:56 Set A/D data flow result=40 12:11:56 Set A/D channel type result=40 12:11:56 Set A/D encoding result=40 12:11:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:11:56 Set channel filter=0.000000e+000 result=40 12:11:56 Config A/D Result=40 12:11:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:11:56 Get A/D filter: -9.255963e+061 result=40 12:11:56 Get A/D value=-858993460 result=40 12:11:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:11:56 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:11:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:11:56 Aux= 12:11:56 Message to Camera, serial 9809 queued [UTC 2018-12-4 12:12:09] 12:12:27 Received message from Master: op=PointingHead serial=9816 12:12:27 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:12:27 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:12:27 Point started: ret=0 12:12:27 point_skyscan result=0 12:12:28 Check angles 12:12:28 SkyScan query 12:12:28 SkyScan query done: ret=0 az=113.025<-7535 ze=-171<-23400 Statuses=0009 0009 12:12:28 Msec=0 True Az=113.025 Ze=-171 Az status=0009 Ze status=0009 12:12:28 Check angles 12:12:28 SkyScan query 12:12:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:12:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:12:29 Message to Master queued w/err=0: serial=9816 error=0 12:12:34 Received message from Master: op=Filter serial=9817 12:12:34 Color wheel filter change from 0 to 0 12:12:34 FLIGetFilterPos err=0 currentPosition=0 12:12:34 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:34 Filter is already there-color wheel unchanged 12:12:34 Received message from Master: op=Shutter serial=9818 12:12:34 Shutter LASER open 12:12:34 Received message from Camera: op=State serial=9820 12:12:34 GetSingleValue result=40 Value=cccccccc 12:12:34 SkyScan query 12:12:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:12:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:35 Parameters OK 12:12:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:35 Set A/D data flow result=40 12:12:35 Set A/D channel type result=40 12:12:35 Set A/D encoding result=40 12:12:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:35 Set channel filter=0.000000e+000 result=40 12:12:35 Config A/D Result=40 12:12:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:35 Get A/D filter: -9.255963e+061 result=40 12:12:35 Get A/D value=-858993460 result=40 12:12:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:35 Parameters OK 12:12:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:35 Set A/D data flow result=40 12:12:35 Set A/D channel type result=40 12:12:35 Set A/D encoding result=40 12:12:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:35 Set channel filter=0.000000e+000 result=40 12:12:35 Config A/D Result=40 12:12:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:35 Get A/D filter: -9.255963e+061 result=40 12:12:35 Get A/D value=-858993460 result=40 12:12:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:35 Aux= 12:12:35 Message to Camera, serial 9820 queued 12:12:37 Received message from Master: op=Shutter serial=9824 12:12:37 Shutter LASER close 12:12:38 Received message from Master: op=PointingHead serial=9828 12:12:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:12:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:12:38 Point started: ret=0 12:12:38 point_skyscan result=0 12:12:39 Check angles 12:12:39 SkyScan query 12:12:40 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.71<-21514 Statuses=0009 0009 12:12:40 Msec=0 True Az=136.485 Ze=-142.71 Az status=0009 Ze status=0009 12:12:40 Check angles 12:12:40 SkyScan query 12:12:40 SkyScan query done: ret=0 az=154.065<-10271 ze=-121.755<-20117 Statuses=0009 0009 12:12:40 Msec=750 True Az=154.065 Ze=-121.755 Az status=0009 Ze status=0009 12:12:41 Check angles 12:12:41 SkyScan query 12:12:41 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.785<-18719 Statuses=0009 0009 12:12:41 Msec=1500 True Az=171.42 Ze=-100.785 Az status=0009 Ze status=0009 12:12:41 Check angles 12:12:41 SkyScan query 12:12:42 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.845<-17323 Statuses=0008 0009 12:12:42 Msec=2250 True Az=176.025 Ze=-79.845 Az status=0008 Ze status=0009 12:12:42 Check angles 12:12:42 SkyScan query 12:12:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.89<-15926 Statuses=0008 0009 12:12:43 Msec=3000 True Az=176.01 Ze=-58.89 Az status=0008 Ze status=0009 12:12:43 Check angles 12:12:43 SkyScan query 12:12:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:12:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:12:43 Message to Master queued w/err=0: serial=9828 error=0 12:12:48 Received message from Master: op=Filter serial=9829 12:12:48 Color wheel filter change from 0 to 0 12:12:48 FLIGetFilterPos err=0 currentPosition=0 12:12:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:12:48 Filter is already there-color wheel unchanged 12:12:49 Received message from Master: op=Shutter serial=9830 12:12:49 Shutter LASER close 12:12:49 Received message from Camera: op=State serial=9832 12:12:49 GetSingleValue result=40 Value=cccccccc 12:12:49 SkyScan query 12:12:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:12:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:49 Parameters OK 12:12:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:49 Set A/D data flow result=40 12:12:49 Set A/D channel type result=40 12:12:49 Set A/D encoding result=40 12:12:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:49 Set channel filter=0.000000e+000 result=40 12:12:49 Config A/D Result=40 12:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:49 Get A/D filter: -9.255963e+061 result=40 12:12:49 Get A/D value=-858993460 result=40 12:12:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:12:49 Parameters OK 12:12:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:12:49 Set A/D data flow result=40 12:12:49 Set A/D channel type result=40 12:12:49 Set A/D encoding result=40 12:12:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:12:49 Set channel filter=0.000000e+000 result=40 12:12:49 Config A/D Result=40 12:12:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:12:49 Get A/D filter: -9.255963e+061 result=40 12:12:49 Get A/D value=-858993460 result=40 12:12:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:12:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:12:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:12:49 Aux= 12:12:49 Message to Camera, serial 9832 queued 12:13:20 Received message from Master: op=PointingHead serial=9839 12:13:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:13:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:13:20 Point started: ret=0 12:13:20 point_skyscan result=0 12:13:21 Check angles 12:13:21 SkyScan query 12:13:22 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.555<-13437 Statuses=0009 0009 12:13:22 Msec=0 True Az=152.79 Ze=-21.555 Az status=0009 Ze status=0009 12:13:22 Check angles 12:13:22 SkyScan query 12:13:23 SkyScan query done: ret=0 az=135.375<-9025 ze=-0.57<-12038 Statuses=0009 0009 12:13:23 Msec=750 True Az=135.375 Ze=-0.57 Az status=0009 Ze status=0009 12:13:23 Check angles 12:13:23 SkyScan query 12:13:23 SkyScan query done: ret=0 az=117.465<-7831 ze=20.79<-10614 Statuses=0009 0009 12:13:23 Msec=1500 True Az=117.465 Ze=20.79 Az status=0009 Ze status=0009 12:13:24 Check angles 12:13:24 SkyScan query 12:13:24 SkyScan query done: ret=0 az=100.065<-6671 ze=41.76<-9216 Statuses=0009 0009 12:13:24 Msec=2250 True Az=100.065 Ze=41.76 Az status=0009 Ze status=0009 12:13:24 Check angles 12:13:24 SkyScan query 12:13:25 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:13:25 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:13:25 Check angles 12:13:25 SkyScan query 12:13:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:13:26 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 12:13:26 Message to Master queued w/err=0: serial=9839 error=0 12:13:31 Received message from Master: op=Filter serial=9840 12:13:31 Color wheel filter change from 0 to 0 12:13:31 FLIGetFilterPos err=0 currentPosition=0 12:13:31 FLIGetStepsRemaining err=0 RemainingSteps=0 12:13:31 Filter is already there-color wheel unchanged 12:13:31 Received message from Master: op=Shutter serial=9841 12:13:31 Shutter LASER close 12:13:31 Received message from Camera: op=State serial=9843 12:13:31 GetSingleValue result=40 Value=cccccccc 12:13:31 SkyScan query 12:13:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:13:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:31 Parameters OK 12:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:31 Set A/D data flow result=40 12:13:31 Set A/D channel type result=40 12:13:31 Set A/D encoding result=40 12:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:31 Set channel filter=0.000000e+000 result=40 12:13:31 Config A/D Result=40 12:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:31 Get A/D filter: -9.255963e+061 result=40 12:13:31 Get A/D value=-858993460 result=40 12:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:13:31 Parameters OK 12:13:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:13:31 Set A/D data flow result=40 12:13:31 Set A/D channel type result=40 12:13:31 Set A/D encoding result=40 12:13:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:13:31 Set channel filter=0.000000e+000 result=40 12:13:31 Config A/D Result=40 12:13:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:13:31 Get A/D filter: -9.255963e+061 result=40 12:13:31 Get A/D value=-858993460 result=40 12:13:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:13:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:13:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:13:31 Aux= 12:13:31 Message to Camera, serial 9843 queued 12:14:02 Received message from Master: op=PointingHead serial=9850 12:14:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:14:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:14:03 Point started: ret=0 12:14:03 point_skyscan result=0 12:14:03 Check angles 12:14:03 SkyScan query 12:14:04 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 12:14:04 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 12:14:04 Check angles 12:14:04 SkyScan query 12:14:05 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 12:14:05 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 12:14:05 Check angles 12:14:05 SkyScan query 12:14:05 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 12:14:05 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 12:14:06 Check angles 12:14:06 SkyScan query 12:14:06 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 12:14:06 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 12:14:06 Check angles 12:14:06 SkyScan query 12:14:07 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:14:07 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:14:07 Check angles 12:14:07 SkyScan query 12:14:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:14:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:14:08 Message to Master queued w/err=0: serial=9850 error=0 12:14:13 Received message from Master: op=Filter serial=9851 12:14:13 Color wheel filter change from 0 to 0 12:14:13 FLIGetFilterPos err=0 currentPosition=0 12:14:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:13 Filter is already there-color wheel unchanged 12:14:13 Received message from Master: op=Shutter serial=9852 12:14:13 Shutter LASER close 12:14:13 Received message from Camera: op=State serial=9854 12:14:13 GetSingleValue result=40 Value=cccccccc 12:14:13 SkyScan query 12:14:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:14:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:14 Parameters OK 12:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:14 Set A/D data flow result=40 12:14:14 Set A/D channel type result=40 12:14:14 Set A/D encoding result=40 12:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:14 Set channel filter=0.000000e+000 result=40 12:14:14 Config A/D Result=40 12:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:14 Get A/D filter: -9.255963e+061 result=40 12:14:14 Get A/D value=-858993460 result=40 12:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:14 Parameters OK 12:14:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:14 Set A/D data flow result=40 12:14:14 Set A/D channel type result=40 12:14:14 Set A/D encoding result=40 12:14:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:14 Set channel filter=0.000000e+000 result=40 12:14:14 Config A/D Result=40 12:14:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:14 Get A/D filter: -9.255963e+061 result=40 12:14:14 Get A/D value=-858993460 result=40 12:14:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:14 Aux= 12:14:14 Message to Camera, serial 9854 queued 12:14:44 Received message from Master: op=PointingHead serial=9861 12:14:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:14:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:14:45 Point started: ret=0 12:14:45 point_skyscan result=0 12:14:45 Check angles 12:14:45 SkyScan query 12:14:46 SkyScan query done: ret=0 az=153.135<-10209 ze=8.85<-11410 Statuses=0009 0009 12:14:46 Msec=0 True Az=153.135 Ze=8.85 Az status=0009 Ze status=0009 12:14:46 Check angles 12:14:46 SkyScan query 12:14:47 SkyScan query done: ret=0 az=135.315<-9021 ze=-12.54<-12836 Statuses=0009 0009 12:14:47 Msec=750 True Az=135.315 Ze=-12.54 Az status=0009 Ze status=0009 12:14:47 Check angles 12:14:47 SkyScan query 12:14:48 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.465<-14231 Statuses=0009 0009 12:14:48 Msec=1500 True Az=117.78 Ze=-33.465 Az status=0009 Ze status=0009 12:14:48 Check angles 12:14:48 SkyScan query 12:14:48 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 12:14:48 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 12:14:48 Check angles 12:14:48 SkyScan query 12:14:49 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:14:49 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:14:49 Check angles 12:14:49 SkyScan query 12:14:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:14:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:14:50 Message to Master queued w/err=0: serial=9861 error=0 12:14:55 Received message from Master: op=Filter serial=9862 12:14:55 Color wheel filter change from 0 to 0 12:14:55 FLIGetFilterPos err=0 currentPosition=0 12:14:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:14:55 Filter is already there-color wheel unchanged 12:14:55 Received message from Master: op=Shutter serial=9863 12:14:55 Shutter LASER close 12:14:55 Received message from Camera: op=State serial=9865 12:14:55 GetSingleValue result=40 Value=cccccccc 12:14:55 SkyScan query 12:14:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:14:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:56 Parameters OK 12:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:56 Set A/D data flow result=40 12:14:56 Set A/D channel type result=40 12:14:56 Set A/D encoding result=40 12:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:56 Set channel filter=0.000000e+000 result=40 12:14:56 Config A/D Result=40 12:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:56 Get A/D filter: -9.255963e+061 result=40 12:14:56 Get A/D value=-858993460 result=40 12:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:14:56 Parameters OK 12:14:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:14:56 Set A/D data flow result=40 12:14:56 Set A/D channel type result=40 12:14:56 Set A/D encoding result=40 12:14:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:14:56 Set channel filter=0.000000e+000 result=40 12:14:56 Config A/D Result=40 12:14:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:14:56 Get A/D filter: -9.255963e+061 result=40 12:14:56 Get A/D value=-858993460 result=40 12:14:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:14:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:14:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:14:56 Aux= 12:14:56 Message to Camera, serial 9865 queued 12:15:26 Received message from Master: op=PointingHead serial=9872 12:15:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:15:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:15:27 Point started: ret=0 12:15:27 point_skyscan result=0 12:15:28 Check angles 12:15:28 SkyScan query 12:15:28 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.69<-17446 Statuses=0009 0009 12:15:28 Msec=0 True Az=109.38 Ze=-81.69 Az status=0009 Ze status=0009 12:15:28 Check angles 12:15:28 SkyScan query 12:15:29 SkyScan query done: ret=0 az=113.01<-7534 ze=-103.065<-18871 Statuses=0008 0009 12:15:29 Msec=750 True Az=113.01 Ze=-103.065 Az status=0008 Ze status=0009 12:15:29 Check angles 12:15:29 SkyScan query 12:15:30 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.005<-20267 Statuses=0008 0009 12:15:30 Msec=1500 True Az=113.01 Ze=-124.005 Az status=0008 Ze status=0009 12:15:30 Check angles 12:15:30 SkyScan query 12:15:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.96<-21664 Statuses=0008 0009 12:15:30 Msec=2250 True Az=112.995 Ze=-144.96 Az status=0008 Ze status=0009 12:15:31 Check angles 12:15:31 SkyScan query 12:15:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 12:15:31 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 12:15:31 Check angles 12:15:31 SkyScan query 12:15:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:15:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:15:32 Message to Master queued w/err=0: serial=9872 error=0 12:15:37 Received message from Master: op=Filter serial=9873 12:15:37 Color wheel filter change from 0 to 0 12:15:37 FLIGetFilterPos err=0 currentPosition=0 12:15:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:37 Filter is already there-color wheel unchanged 12:15:37 Received message from Master: op=Shutter serial=9874 12:15:37 Shutter LASER open 12:15:37 Received message from Camera: op=State serial=9876 12:15:37 GetSingleValue result=40 Value=cccccccc 12:15:37 SkyScan query 12:15:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:15:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:38 Parameters OK 12:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:38 Set A/D data flow result=40 12:15:38 Set A/D channel type result=40 12:15:38 Set A/D encoding result=40 12:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:38 Set channel filter=0.000000e+000 result=40 12:15:38 Config A/D Result=40 12:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:38 Get A/D filter: -9.255963e+061 result=40 12:15:38 Get A/D value=-858993460 result=40 12:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:38 Parameters OK 12:15:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:38 Set A/D data flow result=40 12:15:38 Set A/D channel type result=40 12:15:38 Set A/D encoding result=40 12:15:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:38 Set channel filter=0.000000e+000 result=40 12:15:38 Config A/D Result=40 12:15:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:38 Get A/D filter: -9.255963e+061 result=40 12:15:38 Get A/D value=-858993460 result=40 12:15:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:38 Aux= 12:15:38 Message to Camera, serial 9876 queued 12:15:40 Received message from Master: op=Shutter serial=9880 12:15:40 Shutter LASER close 12:15:41 Received message from Master: op=PointingHead serial=9884 12:15:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:15:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:15:41 Point started: ret=0 12:15:41 point_skyscan result=0 12:15:42 Check angles 12:15:42 SkyScan query 12:15:42 SkyScan query done: ret=0 az=90.255<-6017 ze=157.455<-1503 Statuses=0009 0009 12:15:42 Msec=0 True Az=90.255 Ze=157.455 Az status=0009 Ze status=0009 12:15:43 Check angles 12:15:43 SkyScan query 12:15:43 SkyScan query done: ret=0 az=72.39<-4826 ze=136.095<-2927 Statuses=0009 0009 12:15:43 Msec=750 True Az=72.39 Ze=136.095 Az status=0009 Ze status=0009 12:15:43 Check angles 12:15:43 SkyScan query 12:15:44 SkyScan query done: ret=0 az=54.855<-3657 ze=115.14<-4324 Statuses=0009 0009 12:15:44 Msec=1500 True Az=54.855 Ze=115.14 Az status=0009 Ze status=0009 12:15:44 Check angles 12:15:44 SkyScan query 12:15:45 SkyScan query done: ret=0 az=40.845<-2723 ze=94.17<-5722 Statuses=0009 0009 12:15:45 Msec=2250 True Az=40.845 Ze=94.17 Az status=0009 Ze status=0009 12:15:45 Check angles 12:15:45 SkyScan query 12:15:45 SkyScan query done: ret=0 az=41.01<-2734 ze=73.2<-7120 Statuses=0008 0009 12:15:45 Msec=3000 True Az=41.01 Ze=73.2 Az status=0008 Ze status=0009 12:15:46 Check angles 12:15:46 SkyScan query 12:15:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.44<-8504 Statuses=0008 0009 12:15:46 Msec=3750 True Az=40.995 Ze=52.44 Az status=0008 Ze status=0009 12:15:46 Check angles 12:15:46 SkyScan query 12:15:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:15:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:15:47 Message to Master queued w/err=0: serial=9884 error=0 12:15:52 Received message from Master: op=Filter serial=9885 12:15:52 Color wheel filter change from 0 to 0 12:15:52 FLIGetFilterPos err=0 currentPosition=0 12:15:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:15:52 Filter is already there-color wheel unchanged 12:15:52 Received message from Master: op=Shutter serial=9886 12:15:52 Shutter LASER close 12:15:52 Received message from Camera: op=State serial=9888 12:15:52 GetSingleValue result=40 Value=cccccccc 12:15:52 SkyScan query 12:15:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:53 Parameters OK 12:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:53 Set A/D data flow result=40 12:15:53 Set A/D channel type result=40 12:15:53 Set A/D encoding result=40 12:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:53 Set channel filter=0.000000e+000 result=40 12:15:53 Config A/D Result=40 12:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:53 Get A/D filter: -9.255963e+061 result=40 12:15:53 Get A/D value=-858993460 result=40 12:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:15:53 Parameters OK 12:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:15:53 Set A/D data flow result=40 12:15:53 Set A/D channel type result=40 12:15:53 Set A/D encoding result=40 12:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:15:53 Set channel filter=0.000000e+000 result=40 12:15:53 Config A/D Result=40 12:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:15:53 Get A/D filter: -9.255963e+061 result=40 12:15:53 Get A/D value=-858993460 result=40 12:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:15:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:15:53 Aux= 12:15:53 Message to Camera, serial 9888 queued 12:16:24 Received message from Master: op=PointingHead serial=9895 12:16:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:16:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:16:24 Point started: ret=0 12:16:24 point_skyscan result=0 12:16:25 Check angles 12:16:25 SkyScan query 12:16:25 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 12:16:25 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 12:16:26 Check angles 12:16:26 SkyScan query 12:16:26 SkyScan query done: ret=0 az=81.51<-5434 ze=66.495<-7567 Statuses=0009 0008 12:16:26 Msec=750 True Az=81.51 Ze=66.495 Az status=0009 Ze status=0008 12:16:26 Check angles 12:16:26 SkyScan query 12:16:27 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 12:16:27 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 12:16:27 Check angles 12:16:27 SkyScan query 12:16:28 SkyScan query done: ret=0 az=116.49<-7766 ze=66.495<-7567 Statuses=0009 0008 12:16:28 Msec=2250 True Az=116.49 Ze=66.495 Az status=0009 Ze status=0008 12:16:28 Check angles 12:16:28 SkyScan query 12:16:28 SkyScan query done: ret=0 az=133.935<-8929 ze=66.495<-7567 Statuses=0009 0008 12:16:28 Msec=3000 True Az=133.935 Ze=66.495 Az status=0009 Ze status=0008 12:16:29 Check angles 12:16:29 SkyScan query 12:16:29 SkyScan query done: ret=0 az=151.335<-10089 ze=66.495<-7567 Statuses=0009 0008 12:16:29 Msec=3750 True Az=151.335 Ze=66.495 Az status=0009 Ze status=0008 12:16:29 Check angles 12:16:29 SkyScan query 12:16:30 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:16:30 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:16:30 Message to Master queued w/err=0: serial=9895 error=0 12:16:35 Received message from Master: op=Filter serial=9896 12:16:35 Color wheel filter change from 0 to 0 12:16:35 FLIGetFilterPos err=0 currentPosition=0 12:16:35 FLIGetStepsRemaining err=0 RemainingSteps=0 12:16:35 Filter is already there-color wheel unchanged 12:16:35 Received message from Master: op=Shutter serial=9897 12:16:35 Shutter LASER close 12:16:35 Received message from Camera: op=State serial=9899 12:16:35 GetSingleValue result=40 Value=cccccccc 12:16:35 SkyScan query 12:16:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:16:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:36 Parameters OK 12:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:36 Set A/D data flow result=40 12:16:36 Set A/D channel type result=40 12:16:36 Set A/D encoding result=40 12:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:36 Set channel filter=0.000000e+000 result=40 12:16:36 Config A/D Result=40 12:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:36 Get A/D filter: -9.255963e+061 result=40 12:16:36 Get A/D value=-858993460 result=40 12:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:16:36 Parameters OK 12:16:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:16:36 Set A/D data flow result=40 12:16:36 Set A/D channel type result=40 12:16:36 Set A/D encoding result=40 12:16:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:16:36 Set channel filter=0.000000e+000 result=40 12:16:36 Config A/D Result=40 12:16:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:16:36 Get A/D filter: -9.255963e+061 result=40 12:16:36 Get A/D value=-858993460 result=40 12:16:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:16:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:16:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:16:36 Aux= 12:16:36 Message to Camera, serial 9899 queued 12:17:07 Received message from Master: op=PointingHead serial=9906 12:17:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:17:07 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:17:07 Point started: ret=0 12:17:07 point_skyscan result=0 12:17:08 Check angles 12:17:08 SkyScan query 12:17:08 SkyScan query done: ret=0 az=135.255<-9017 ze=36.99<-9534 Statuses=0009 0009 12:17:08 Msec=0 True Az=135.255 Ze=36.99 Az status=0009 Ze status=0009 12:17:08 Check angles 12:17:08 SkyScan query 12:17:09 SkyScan query done: ret=0 az=117.705<-7847 ze=16.02<-10932 Statuses=0009 0009 12:17:09 Msec=750 True Az=117.705 Ze=16.02 Az status=0009 Ze status=0009 12:17:09 Check angles 12:17:09 SkyScan query 12:17:10 SkyScan query done: ret=0 az=100.38<-6692 ze=-4.935<-12329 Statuses=0009 0009 12:17:10 Msec=1500 True Az=100.38 Ze=-4.935 Az status=0009 Ze status=0009 12:17:10 Check angles 12:17:10 SkyScan query 12:17:10 SkyScan query done: ret=0 az=82.845<-5523 ze=-25.905<-13727 Statuses=0009 0009 12:17:10 Msec=2250 True Az=82.845 Ze=-25.905 Az status=0009 Ze status=0009 12:17:11 Check angles 12:17:11 SkyScan query 12:17:11 SkyScan query done: ret=0 az=65.37<-4358 ze=-38.565<-14571 Statuses=0009 0008 12:17:11 Msec=3000 True Az=65.37 Ze=-38.565 Az status=0009 Ze status=0008 12:17:11 Check angles 12:17:11 SkyScan query 12:17:12 SkyScan query done: ret=0 az=47.925<-3195 ze=-38.535<-14569 Statuses=0009 0008 12:17:12 Msec=3750 True Az=47.925 Ze=-38.535 Az status=0009 Ze status=0008 12:17:12 Check angles 12:17:12 SkyScan query 12:17:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:17:13 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:17:13 Message to Master queued w/err=0: serial=9906 error=0 12:17:18 Received message from Master: op=Filter serial=9907 12:17:18 Color wheel filter change from 0 to 0 12:17:18 FLIGetFilterPos err=0 currentPosition=0 12:17:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:17:18 Filter is already there-color wheel unchanged 12:17:18 Received message from Master: op=Shutter serial=9908 12:17:18 Shutter LASER close 12:17:18 Received message from Camera: op=State serial=9910 12:17:18 GetSingleValue result=40 Value=cccccccc 12:17:18 SkyScan query 12:17:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:17:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:19 Parameters OK 12:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:19 Set A/D data flow result=40 12:17:19 Set A/D channel type result=40 12:17:19 Set A/D encoding result=40 12:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:19 Set channel filter=0.000000e+000 result=40 12:17:19 Config A/D Result=40 12:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:19 Get A/D filter: -9.255963e+061 result=40 12:17:19 Get A/D value=-858993460 result=40 12:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:17:19 Parameters OK 12:17:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:17:19 Set A/D data flow result=40 12:17:19 Set A/D channel type result=40 12:17:19 Set A/D encoding result=40 12:17:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:17:19 Set channel filter=0.000000e+000 result=40 12:17:19 Config A/D Result=40 12:17:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:17:19 Get A/D filter: -9.255963e+061 result=40 12:17:19 Get A/D value=-858993460 result=40 12:17:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:17:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:17:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:17:19 Aux= 12:17:19 Message to Camera, serial 9910 queued 12:17:49 Received message from Master: op=PointingHead serial=9917 12:17:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:17:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:17:50 Point started: ret=0 12:17:50 point_skyscan result=0 12:17:50 Check angles 12:17:50 SkyScan query 12:17:51 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.64<-16576 Statuses=0009 0009 12:17:51 Msec=0 True Az=64.17 Ze=-68.64 Az status=0009 Ze status=0009 12:17:51 Check angles 12:17:51 SkyScan query 12:17:52 SkyScan query done: ret=0 az=81.885<-5459 ze=-89.61<-17974 Statuses=0009 0009 12:17:52 Msec=750 True Az=81.885 Ze=-89.61 Az status=0009 Ze status=0009 12:17:52 Check angles 12:17:52 SkyScan query 12:17:53 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.565<-19371 Statuses=0009 0009 12:17:53 Msec=1500 True Az=99.36 Ze=-110.565 Az status=0009 Ze status=0009 12:17:53 Check angles 12:17:53 SkyScan query 12:17:53 SkyScan query done: ret=0 az=116.73<-7782 ze=-131.505<-20767 Statuses=0009 0009 12:17:53 Msec=2250 True Az=116.73 Ze=-131.505 Az status=0009 Ze status=0009 12:17:53 Check angles 12:17:53 SkyScan query 12:17:54 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 12:17:54 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 12:17:54 Check angles 12:17:54 SkyScan query 12:17:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:17:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:17:55 Message to Master queued w/err=0: serial=9917 error=0 12:18:00 Received message from Master: op=Filter serial=9918 12:18:00 Color wheel filter change from 0 to 0 12:18:00 FLIGetFilterPos err=0 currentPosition=0 12:18:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:00 Filter is already there-color wheel unchanged 12:18:00 Received message from Master: op=Shutter serial=9919 12:18:00 Shutter LASER close 12:18:00 Received message from Camera: op=State serial=9921 12:18:00 GetSingleValue result=40 Value=cccccccc 12:18:00 SkyScan query 12:18:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:18:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:01 Parameters OK 12:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:01 Set A/D data flow result=40 12:18:01 Set A/D channel type result=40 12:18:01 Set A/D encoding result=40 12:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:01 Set channel filter=0.000000e+000 result=40 12:18:01 Config A/D Result=40 12:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:01 Get A/D filter: -9.255963e+061 result=40 12:18:01 Get A/D value=-858993460 result=40 12:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:01 Parameters OK 12:18:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:01 Set A/D data flow result=40 12:18:01 Set A/D channel type result=40 12:18:01 Set A/D encoding result=40 12:18:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:01 Set channel filter=0.000000e+000 result=40 12:18:01 Config A/D Result=40 12:18:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:01 Get A/D filter: -9.255963e+061 result=40 12:18:01 Get A/D value=-858993460 result=40 12:18:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:01 Aux= 12:18:01 Message to Camera, serial 9921 queued 12:18:31 Received message from Master: op=PointingHead serial=9928 12:18:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:18:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:18:32 Point started: ret=0 12:18:32 point_skyscan result=0 12:18:33 Check angles 12:18:33 SkyScan query 12:18:33 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.15<-23410 Statuses=0009 0009 12:18:33 Msec=0 True Az=113.025 Ze=-171.15 Az status=0009 Ze status=0009 12:18:33 Check angles 12:18:33 SkyScan query 12:18:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:18:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:18:34 Message to Master queued w/err=0: serial=9928 error=0 12:18:39 Received message from Master: op=Filter serial=9929 12:18:39 Color wheel filter change from 0 to 0 12:18:39 FLIGetFilterPos err=0 currentPosition=0 12:18:39 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:39 Filter is already there-color wheel unchanged 12:18:39 Received message from Master: op=Shutter serial=9930 12:18:39 Shutter LASER open 12:18:39 Received message from Camera: op=State serial=9932 12:18:39 GetSingleValue result=40 Value=cccccccc 12:18:39 SkyScan query 12:18:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:18:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:40 Parameters OK 12:18:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:40 Set A/D data flow result=40 12:18:40 Set A/D channel type result=40 12:18:40 Set A/D encoding result=40 12:18:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:40 Set channel filter=0.000000e+000 result=40 12:18:40 Config A/D Result=40 12:18:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:40 Get A/D filter: -9.255963e+061 result=40 12:18:40 Get A/D value=-858993460 result=40 12:18:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:40 Parameters OK 12:18:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:40 Set A/D data flow result=40 12:18:40 Set A/D channel type result=40 12:18:40 Set A/D encoding result=40 12:18:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:40 Set channel filter=0.000000e+000 result=40 12:18:40 Config A/D Result=40 12:18:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:40 Get A/D filter: -9.255963e+061 result=40 12:18:40 Get A/D value=-858993460 result=40 12:18:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:40 Aux= 12:18:40 Message to Camera, serial 9932 queued 12:18:42 Received message from Master: op=Shutter serial=9936 12:18:42 Shutter LASER close 12:18:43 Received message from Master: op=PointingHead serial=9940 12:18:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:18:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:18:43 Point started: ret=0 12:18:43 point_skyscan result=0 12:18:44 Check angles 12:18:44 SkyScan query 12:18:45 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.4<-21560 Statuses=0009 0009 12:18:45 Msec=0 True Az=135.93 Ze=-143.4 Az status=0009 Ze status=0009 12:18:45 Check angles 12:18:45 SkyScan query 12:18:45 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.46<-20164 Statuses=0009 0009 12:18:45 Msec=750 True Az=153.45 Ze=-122.46 Az status=0009 Ze status=0009 12:18:45 Check angles 12:18:45 SkyScan query 12:18:46 SkyScan query done: ret=0 az=170.85<-11390 ze=-101.505<-18767 Statuses=0009 0009 12:18:46 Msec=1500 True Az=170.85 Ze=-101.505 Az status=0009 Ze status=0009 12:18:46 Check angles 12:18:46 SkyScan query 12:18:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.535<-17369 Statuses=0008 0009 12:18:47 Msec=2250 True Az=176.025 Ze=-80.535 Az status=0008 Ze status=0009 12:18:47 Check angles 12:18:47 SkyScan query 12:18:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.58<-15972 Statuses=0008 0009 12:18:48 Msec=3000 True Az=176.01 Ze=-59.58 Az status=0008 Ze status=0009 12:18:48 Check angles 12:18:48 SkyScan query 12:18:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:18:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:18:48 Message to Master queued w/err=0: serial=9940 error=0 12:18:53 Received message from Master: op=Filter serial=9941 12:18:53 Color wheel filter change from 0 to 0 12:18:53 FLIGetFilterPos err=0 currentPosition=0 12:18:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:18:53 Filter is already there-color wheel unchanged 12:18:53 Received message from Master: op=Shutter serial=9942 12:18:53 Shutter LASER close 12:18:54 Received message from Camera: op=State serial=9944 12:18:54 GetSingleValue result=40 Value=cccccccc 12:18:54 SkyScan query 12:18:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:18:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:54 Parameters OK 12:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:54 Set A/D data flow result=40 12:18:54 Set A/D channel type result=40 12:18:54 Set A/D encoding result=40 12:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:54 Set channel filter=0.000000e+000 result=40 12:18:54 Config A/D Result=40 12:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:54 Get A/D filter: -9.255963e+061 result=40 12:18:54 Get A/D value=-858993460 result=40 12:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:18:54 Parameters OK 12:18:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:18:54 Set A/D data flow result=40 12:18:54 Set A/D channel type result=40 12:18:54 Set A/D encoding result=40 12:18:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:18:54 Set channel filter=0.000000e+000 result=40 12:18:54 Config A/D Result=40 12:18:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:18:54 Get A/D filter: -9.255963e+061 result=40 12:18:54 Get A/D value=-858993460 result=40 12:18:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:18:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:18:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:18:54 Aux= 12:18:54 Message to Camera, serial 9944 queued 12:19:25 Received message from Master: op=PointingHead serial=9951 12:19:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:19:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:19:25 Point started: ret=0 12:19:25 point_skyscan result=0 12:19:26 Check angles 12:19:26 SkyScan query 12:19:27 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.21<-13414 Statuses=0009 0009 12:19:27 Msec=0 True Az=152.61 Ze=-21.21 Az status=0009 Ze status=0009 12:19:27 Check angles 12:19:27 SkyScan query 12:19:28 SkyScan query done: ret=0 az=135.09<-9006 ze=-0.24<-12016 Statuses=0009 0009 12:19:28 Msec=750 True Az=135.09 Ze=-0.24 Az status=0009 Ze status=0009 12:19:28 Check angles 12:19:28 SkyScan query 12:19:28 SkyScan query done: ret=0 az=117.15<-7810 ze=21.15<-10590 Statuses=0009 0009 12:19:28 Msec=1500 True Az=117.15 Ze=21.15 Az status=0009 Ze status=0009 12:19:28 Check angles 12:19:28 SkyScan query 12:19:29 SkyScan query done: ret=0 az=99.75<-6650 ze=42.105<-9193 Statuses=0009 0009 12:19:29 Msec=2250 True Az=99.75 Ze=42.105 Az status=0009 Ze status=0009 12:19:29 Check angles 12:19:29 SkyScan query 12:19:30 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:19:30 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:19:30 Check angles 12:19:30 SkyScan query 12:19:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:19:31 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:19:31 Message to Master queued w/err=0: serial=9951 error=0 12:19:36 Received message from Master: op=Filter serial=9952 12:19:36 Color wheel filter change from 0 to 0 12:19:36 FLIGetFilterPos err=0 currentPosition=0 12:19:36 FLIGetStepsRemaining err=0 RemainingSteps=0 12:19:36 Filter is already there-color wheel unchanged 12:19:36 Received message from Master: op=Shutter serial=9953 12:19:36 Shutter LASER close 12:19:36 Received message from Camera: op=State serial=9955 12:19:36 GetSingleValue result=40 Value=cccccccc 12:19:36 SkyScan query 12:19:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:19:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:36 Parameters OK 12:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:36 Set A/D data flow result=40 12:19:36 Set A/D channel type result=40 12:19:36 Set A/D encoding result=40 12:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:36 Set channel filter=0.000000e+000 result=40 12:19:36 Config A/D Result=40 12:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:36 Get A/D filter: -9.255963e+061 result=40 12:19:36 Get A/D value=-858993460 result=40 12:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:19:36 Parameters OK 12:19:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:19:36 Set A/D data flow result=40 12:19:36 Set A/D channel type result=40 12:19:36 Set A/D encoding result=40 12:19:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:19:36 Set channel filter=0.000000e+000 result=40 12:19:36 Config A/D Result=40 12:19:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:19:36 Get A/D filter: -9.255963e+061 result=40 12:19:36 Get A/D value=-858993460 result=40 12:19:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:19:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:19:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:19:36 Aux= 12:19:36 Message to Camera, serial 9955 queued 12:20:07 Received message from Master: op=PointingHead serial=9962 12:20:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:20:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:20:08 Point started: ret=0 12:20:08 point_skyscan result=0 12:20:08 Check angles 12:20:08 SkyScan query 12:20:09 SkyScan query done: ret=0 az=108.87<-7258 ze=38.49<-9434 Statuses=0009 0008 12:20:09 Msec=0 True Az=108.87 Ze=38.49 Az status=0009 Ze status=0008 12:20:09 Check angles 12:20:09 SkyScan query 12:20:10 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 12:20:10 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 12:20:10 Check angles 12:20:10 SkyScan query 12:20:10 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 12:20:10 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 12:20:11 Check angles 12:20:11 SkyScan query 12:20:11 SkyScan query done: ret=0 az=161.955<-10797 ze=38.505<-9433 Statuses=0009 0008 12:20:11 Msec=2250 True Az=161.955 Ze=38.505 Az status=0009 Ze status=0008 12:20:11 Check angles 12:20:11 SkyScan query 12:20:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:20:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:20:12 Check angles 12:20:12 SkyScan query 12:20:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:20:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:20:13 Message to Master queued w/err=0: serial=9962 error=0 12:20:18 Received message from Master: op=Filter serial=9963 12:20:18 Color wheel filter change from 0 to 0 12:20:18 FLIGetFilterPos err=0 currentPosition=0 12:20:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:20:18 Filter is already there-color wheel unchanged 12:20:18 Received message from Master: op=Shutter serial=9964 12:20:18 Shutter LASER close 12:20:18 Received message from Camera: op=State serial=9966 12:20:18 GetSingleValue result=40 Value=cccccccc 12:20:18 SkyScan query 12:20:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:20:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:18 Parameters OK 12:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:18 Set A/D data flow result=40 12:20:18 Set A/D channel type result=40 12:20:18 Set A/D encoding result=40 12:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:18 Set channel filter=0.000000e+000 result=40 12:20:18 Config A/D Result=40 12:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:18 Get A/D filter: -9.255963e+061 result=40 12:20:18 Get A/D value=-858993460 result=40 12:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:20:18 Parameters OK 12:20:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:20:18 Set A/D data flow result=40 12:20:18 Set A/D channel type result=40 12:20:18 Set A/D encoding result=40 12:20:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:20:18 Set channel filter=0.000000e+000 result=40 12:20:18 Config A/D Result=40 12:20:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:20:18 Get A/D filter: -9.255963e+061 result=40 12:20:18 Get A/D value=-858993460 result=40 12:20:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:20:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:20:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:20:18 Aux= 12:20:18 Message to Camera, serial 9966 queued 12:20:49 Received message from Master: op=PointingHead serial=9973 12:20:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:20:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:20:50 Point started: ret=0 12:20:50 point_skyscan result=0 12:20:50 Check angles 12:20:50 SkyScan query 12:20:51 SkyScan query done: ret=0 az=152.685<-10179 ze=8.235<-11451 Statuses=0009 0009 12:20:51 Msec=0 True Az=152.685 Ze=8.235 Az status=0009 Ze status=0009 12:20:51 Check angles 12:20:51 SkyScan query 12:20:52 SkyScan query done: ret=0 az=134.7<-8980 ze=-13.17<-12878 Statuses=0009 0009 12:20:52 Msec=750 True Az=134.7 Ze=-13.17 Az status=0009 Ze status=0009 12:20:52 Check angles 12:20:52 SkyScan query 12:20:53 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.11<-14274 Statuses=0009 0009 12:20:53 Msec=1500 True Az=117.12 Ze=-34.11 Az status=0009 Ze status=0009 12:20:53 Check angles 12:20:53 SkyScan query [UTC 2018-12-4 12:20:53] 12:20:53 SkyScan query done: ret=0 az=99.54<-6636 ze=-51.555<-15437 Statuses=0009 0009 12:20:53 Msec=2250 True Az=99.54 Ze=-51.555 Az status=0009 Ze status=0009 12:20:53 Check angles 12:20:53 SkyScan query 12:20:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 12:20:54 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 12:20:54 Check angles 12:20:54 SkyScan query 12:20:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:20:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:20:55 Message to Master queued w/err=0: serial=9973 error=0 12:21:00 Received message from Master: op=Filter serial=9974 12:21:00 Color wheel filter change from 0 to 0 12:21:00 FLIGetFilterPos err=0 currentPosition=0 12:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:00 Filter is already there-color wheel unchanged 12:21:00 Received message from Master: op=Shutter serial=9975 12:21:00 Shutter LASER close 12:21:00 Received message from Camera: op=State serial=9977 12:21:00 GetSingleValue result=40 Value=cccccccc 12:21:00 SkyScan query 12:21:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:21:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:01 Parameters OK 12:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:01 Set A/D data flow result=40 12:21:01 Set A/D channel type result=40 12:21:01 Set A/D encoding result=40 12:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:01 Set channel filter=0.000000e+000 result=40 12:21:01 Config A/D Result=40 12:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:01 Get A/D filter: -9.255963e+061 result=40 12:21:01 Get A/D value=-858993460 result=40 12:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:01 Parameters OK 12:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:01 Set A/D data flow result=40 12:21:01 Set A/D channel type result=40 12:21:01 Set A/D encoding result=40 12:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:01 Set channel filter=0.000000e+000 result=40 12:21:01 Config A/D Result=40 12:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:01 Get A/D filter: -9.255963e+061 result=40 12:21:01 Get A/D value=-858993460 result=40 12:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:01 Aux= 12:21:01 Message to Camera, serial 9977 queued 12:21:32 Received message from Master: op=PointingHead serial=9984 12:21:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:21:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:21:32 Point started: ret=0 12:21:32 point_skyscan result=0 12:21:33 Check angles 12:21:33 SkyScan query 12:21:33 SkyScan query done: ret=0 az=109.485<-7299 ze=-81.81<-17454 Statuses=0009 0009 12:21:33 Msec=0 True Az=109.485 Ze=-81.81 Az status=0009 Ze status=0009 12:21:33 Check angles 12:21:33 SkyScan query 12:21:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.2<-18880 Statuses=0008 0009 12:21:34 Msec=750 True Az=112.995 Ze=-103.2 Az status=0008 Ze status=0009 12:21:34 Check angles 12:21:34 SkyScan query 12:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.155<-20277 Statuses=0008 0009 12:21:35 Msec=1500 True Az=112.995 Ze=-124.155 Az status=0008 Ze status=0009 12:21:35 Check angles 12:21:35 SkyScan query 12:21:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.095<-21673 Statuses=0008 0009 12:21:35 Msec=2250 True Az=112.995 Ze=-145.095 Az status=0008 Ze status=0009 12:21:36 Check angles 12:21:36 SkyScan query 12:21:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.035<-23069 Statuses=0008 0009 12:21:36 Msec=3000 True Az=112.995 Ze=-166.035 Az status=0008 Ze status=0009 12:21:36 Check angles 12:21:36 SkyScan query 12:21:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 12:21:37 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 12:21:37 Message to Master queued w/err=0: serial=9984 error=0 12:21:42 Received message from Master: op=Filter serial=9985 12:21:42 Color wheel filter change from 0 to 0 12:21:42 FLIGetFilterPos err=0 currentPosition=0 12:21:42 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:42 Filter is already there-color wheel unchanged 12:21:42 Received message from Master: op=Shutter serial=9986 12:21:42 Shutter LASER open 12:21:42 Received message from Camera: op=State serial=9988 12:21:42 GetSingleValue result=40 Value=cccccccc 12:21:42 SkyScan query 12:21:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:43 Parameters OK 12:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:43 Set A/D data flow result=40 12:21:43 Set A/D channel type result=40 12:21:43 Set A/D encoding result=40 12:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:43 Set channel filter=0.000000e+000 result=40 12:21:43 Config A/D Result=40 12:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:43 Get A/D filter: -9.255963e+061 result=40 12:21:43 Get A/D value=-858993460 result=40 12:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:43 Parameters OK 12:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:43 Set A/D data flow result=40 12:21:43 Set A/D channel type result=40 12:21:43 Set A/D encoding result=40 12:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:43 Set channel filter=0.000000e+000 result=40 12:21:43 Config A/D Result=40 12:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:43 Get A/D filter: -9.255963e+061 result=40 12:21:43 Get A/D value=-858993460 result=40 12:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:43 Aux= 12:21:43 Message to Camera, serial 9988 queued 12:21:45 Received message from Master: op=Shutter serial=9992 12:21:45 Shutter LASER close 12:21:46 Received message from Master: op=PointingHead serial=9996 12:21:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:21:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:21:46 Point started: ret=0 12:21:46 point_skyscan result=0 12:21:47 Check angles 12:21:47 SkyScan query 12:21:47 SkyScan query done: ret=0 az=89.475<-5965 ze=156.795<-1547 Statuses=0009 0009 12:21:47 Msec=0 True Az=89.475 Ze=156.795 Az status=0009 Ze status=0009 12:21:48 Check angles 12:21:48 SkyScan query 12:21:48 SkyScan query done: ret=0 az=72.045<-4803 ze=135.81<-2946 Statuses=0009 0009 12:21:48 Msec=750 True Az=72.045 Ze=135.81 Az status=0009 Ze status=0009 12:21:48 Check angles 12:21:48 SkyScan query 12:21:49 SkyScan query done: ret=0 az=54.69<-3646 ze=114.87<-4342 Statuses=0009 0009 12:21:49 Msec=1500 True Az=54.69 Ze=114.87 Az status=0009 Ze status=0009 12:21:49 Received message from Master: op=Identify serial=9997 12:21:49 Check angles 12:21:49 SkyScan query 12:21:50 SkyScan query done: ret=0 az=40.875<-2725 ze=93.9<-5740 Statuses=0009 0009 12:21:50 Msec=2250 True Az=40.875 Ze=93.9 Az status=0009 Ze status=0009 12:21:50 Check angles 12:21:50 SkyScan query 12:21:50 SkyScan query done: ret=0 az=41.01<-2734 ze=72.93<-7138 Statuses=0008 0009 12:21:50 Msec=3000 True Az=41.01 Ze=72.93 Az status=0008 Ze status=0009 12:21:51 Check angles 12:21:51 SkyScan query 12:21:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.545<-8497 Statuses=0008 0009 12:21:51 Msec=3750 True Az=40.995 Ze=52.545 Az status=0008 Ze status=0009 12:21:51 Check angles 12:21:51 SkyScan query 12:21:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:21:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:21:52 Message to Master queued w/err=0: serial=9996 error=0 12:21:57 Received message from Master: op=Filter serial=10000 12:21:57 Color wheel filter change from 0 to 0 12:21:57 FLIGetFilterPos err=0 currentPosition=0 12:21:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:21:57 Filter is already there-color wheel unchanged 12:21:57 Received message from Master: op=Shutter serial=10001 12:21:57 Shutter LASER close 12:21:57 Received message from Camera: op=State serial=10003 12:21:57 GetSingleValue result=40 Value=cccccccc 12:21:57 SkyScan query 12:21:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:21:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:58 Parameters OK 12:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:58 Set A/D data flow result=40 12:21:58 Set A/D channel type result=40 12:21:58 Set A/D encoding result=40 12:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:58 Set channel filter=0.000000e+000 result=40 12:21:58 Config A/D Result=40 12:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:58 Get A/D filter: -9.255963e+061 result=40 12:21:58 Get A/D value=-858993460 result=40 12:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:21:58 Parameters OK 12:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:21:58 Set A/D data flow result=40 12:21:58 Set A/D channel type result=40 12:21:58 Set A/D encoding result=40 12:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:21:58 Set channel filter=0.000000e+000 result=40 12:21:58 Config A/D Result=40 12:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:21:58 Get A/D filter: -9.255963e+061 result=40 12:21:58 Get A/D value=-858993460 result=40 12:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:21:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:21:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:21:58 Aux= 12:21:58 Message to Camera, serial 10003 queued 12:22:29 Received message from Master: op=PointingHead serial=10010 12:22:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:22:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:22:29 Point started: ret=0 12:22:29 point_skyscan result=0 12:22:30 Check angles 12:22:30 SkyScan query 12:22:30 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 12:22:30 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 12:22:31 Check angles 12:22:31 SkyScan query 12:22:31 SkyScan query done: ret=0 az=81.465<-5431 ze=66.495<-7567 Statuses=0009 0008 12:22:31 Msec=750 True Az=81.465 Ze=66.495 Az status=0009 Ze status=0008 12:22:31 Check angles 12:22:31 SkyScan query 12:22:32 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 12:22:32 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 12:22:32 Check angles 12:22:32 SkyScan query 12:22:33 SkyScan query done: ret=0 az=116.445<-7763 ze=66.495<-7567 Statuses=0009 0008 12:22:33 Msec=2250 True Az=116.445 Ze=66.495 Az status=0009 Ze status=0008 12:22:33 Check angles 12:22:33 SkyScan query 12:22:33 SkyScan query done: ret=0 az=133.995<-8933 ze=66.495<-7567 Statuses=0009 0008 12:22:33 Msec=3000 True Az=133.995 Ze=66.495 Az status=0009 Ze status=0008 12:22:34 Check angles 12:22:34 SkyScan query 12:22:34 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 12:22:34 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 12:22:34 Check angles 12:22:34 SkyScan query 12:22:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:22:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:22:35 Message to Master queued w/err=0: serial=10010 error=0 12:22:40 Received message from Master: op=Filter serial=10011 12:22:40 Color wheel filter change from 0 to 0 12:22:40 FLIGetFilterPos err=0 currentPosition=0 12:22:40 FLIGetStepsRemaining err=0 RemainingSteps=0 12:22:40 Filter is already there-color wheel unchanged 12:22:40 Received message from Master: op=Shutter serial=10012 12:22:40 Shutter LASER close 12:22:40 Received message from Camera: op=State serial=10014 12:22:40 GetSingleValue result=40 Value=cccccccc 12:22:40 SkyScan query 12:22:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:22:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:41 Parameters OK 12:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:41 Set A/D data flow result=40 12:22:41 Set A/D channel type result=40 12:22:41 Set A/D encoding result=40 12:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:41 Set channel filter=0.000000e+000 result=40 12:22:41 Config A/D Result=40 12:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:41 Get A/D filter: -9.255963e+061 result=40 12:22:41 Get A/D value=-858993460 result=40 12:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:22:41 Parameters OK 12:22:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:22:41 Set A/D data flow result=40 12:22:41 Set A/D channel type result=40 12:22:41 Set A/D encoding result=40 12:22:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:22:41 Set channel filter=0.000000e+000 result=40 12:22:41 Config A/D Result=40 12:22:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:22:41 Get A/D filter: -9.255963e+061 result=40 12:22:41 Get A/D value=-858993460 result=40 12:22:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:22:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:22:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:22:41 Aux= 12:22:41 Message to Camera, serial 10014 queued 12:23:12 Received message from Master: op=PointingHead serial=10021 12:23:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:23:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:23:12 Point started: ret=0 12:23:12 point_skyscan result=0 12:23:13 Check angles 12:23:13 SkyScan query 12:23:13 SkyScan query done: ret=0 az=134.655<-8977 ze=36.3<-9580 Statuses=0009 0009 12:23:13 Msec=0 True Az=134.655 Ze=36.3 Az status=0009 Ze status=0009 12:23:13 Check angles 12:23:13 SkyScan query 12:23:14 SkyScan query done: ret=0 az=116.805<-7787 ze=14.925<-11005 Statuses=0009 0009 12:23:14 Msec=750 True Az=116.805 Ze=14.925 Az status=0009 Ze status=0009 12:23:14 Check angles 12:23:14 SkyScan query 12:23:15 SkyScan query done: ret=0 az=99.42<-6628 ze=-6.03<-12402 Statuses=0009 0009 12:23:15 Msec=1500 True Az=99.42 Ze=-6.03 Az status=0009 Ze status=0009 12:23:15 Check angles 12:23:15 SkyScan query 12:23:16 SkyScan query done: ret=0 az=81.99<-5466 ze=-26.985<-13799 Statuses=0009 0009 12:23:16 Msec=2250 True Az=81.99 Ze=-26.985 Az status=0009 Ze status=0009 12:23:16 Check angles 12:23:16 SkyScan query 12:23:16 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.565<-14571 Statuses=0009 0008 12:23:16 Msec=3000 True Az=64.47 Ze=-38.565 Az status=0009 Ze status=0008 12:23:16 Check angles 12:23:16 SkyScan query 12:23:17 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 12:23:17 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 12:23:17 Check angles 12:23:17 SkyScan query 12:23:18 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 12:23:18 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 12:23:18 Message to Master queued w/err=0: serial=10021 error=0 12:23:23 Received message from Master: op=Filter serial=10022 12:23:23 Color wheel filter change from 0 to 0 12:23:23 FLIGetFilterPos err=0 currentPosition=0 12:23:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:23:23 Filter is already there-color wheel unchanged 12:23:23 Received message from Master: op=Shutter serial=10023 12:23:23 Shutter LASER close 12:23:23 Received message from Camera: op=State serial=10025 12:23:23 GetSingleValue result=40 Value=cccccccc 12:23:23 SkyScan query 12:23:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:23:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:24 Parameters OK 12:23:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:24 Set A/D data flow result=40 12:23:24 Set A/D channel type result=40 12:23:24 Set A/D encoding result=40 12:23:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:24 Set channel filter=0.000000e+000 result=40 12:23:24 Config A/D Result=40 12:23:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:24 Get A/D filter: -9.255963e+061 result=40 12:23:24 Get A/D value=-858993460 result=40 12:23:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:23:24 Parameters OK 12:23:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:23:24 Set A/D data flow result=40 12:23:24 Set A/D channel type result=40 12:23:24 Set A/D encoding result=40 12:23:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:23:24 Set channel filter=0.000000e+000 result=40 12:23:24 Config A/D Result=40 12:23:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:23:24 Get A/D filter: -9.255963e+061 result=40 12:23:24 Get A/D value=-858993460 result=40 12:23:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:23:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:23:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:23:24 Aux= 12:23:24 Message to Camera, serial 10025 queued 12:23:54 Received message from Master: op=PointingHead serial=10032 12:23:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:23:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:23:55 Point started: ret=0 12:23:55 point_skyscan result=0 12:23:56 Check angles 12:23:56 SkyScan query 12:23:56 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.73<-16582 Statuses=0009 0009 12:23:56 Msec=0 True Az=64.23 Ze=-68.73 Az status=0009 Ze status=0009 12:23:56 Check angles 12:23:56 SkyScan query 12:23:57 SkyScan query done: ret=0 az=82.365<-5491 ze=-90.135<-18009 Statuses=0009 0009 12:23:57 Msec=750 True Az=82.365 Ze=-90.135 Az status=0009 Ze status=0009 12:23:57 Check angles 12:23:57 SkyScan query 12:23:58 SkyScan query done: ret=0 az=99.795<-6653 ze=-111.075<-19405 Statuses=0009 0009 12:23:58 Msec=1500 True Az=99.795 Ze=-111.075 Az status=0009 Ze status=0009 12:23:58 Check angles 12:23:58 SkyScan query 12:23:58 SkyScan query done: ret=0 az=117.12<-7808 ze=-132.015<-20801 Statuses=0009 0009 12:23:58 Msec=2250 True Az=117.12 Ze=-132.015 Az status=0009 Ze status=0009 12:23:59 Check angles 12:23:59 SkyScan query 12:23:59 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 12:23:59 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 12:23:59 Check angles 12:23:59 SkyScan query 12:24:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:24:00 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:24:00 Message to Master queued w/err=0: serial=10032 error=0 12:24:05 Received message from Master: op=Filter serial=10033 12:24:05 Color wheel filter change from 0 to 0 12:24:05 FLIGetFilterPos err=0 currentPosition=0 12:24:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:05 Filter is already there-color wheel unchanged 12:24:05 Received message from Master: op=Shutter serial=10034 12:24:05 Shutter LASER close 12:24:05 Received message from Camera: op=State serial=10036 12:24:05 GetSingleValue result=40 Value=cccccccc 12:24:05 SkyScan query 12:24:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:24:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:06 Parameters OK 12:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:06 Set A/D data flow result=40 12:24:06 Set A/D channel type result=40 12:24:06 Set A/D encoding result=40 12:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:06 Set channel filter=0.000000e+000 result=40 12:24:06 Config A/D Result=40 12:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:06 Get A/D filter: -9.255963e+061 result=40 12:24:06 Get A/D value=-858993460 result=40 12:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:06 Parameters OK 12:24:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:06 Set A/D data flow result=40 12:24:06 Set A/D channel type result=40 12:24:06 Set A/D encoding result=40 12:24:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:06 Set channel filter=0.000000e+000 result=40 12:24:06 Config A/D Result=40 12:24:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:06 Get A/D filter: -9.255963e+061 result=40 12:24:06 Get A/D value=-858993460 result=40 12:24:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:06 Aux= 12:24:06 Message to Camera, serial 10036 queued 12:24:37 Received message from Master: op=PointingHead serial=10043 12:24:37 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:24:37 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:24:37 Point started: ret=0 12:24:37 point_skyscan result=0 12:24:38 Check angles 12:24:38 SkyScan query 12:24:38 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.91<-23394 Statuses=0009 0009 12:24:38 Msec=0 True Az=113.025 Ze=-170.91 Az status=0009 Ze status=0009 12:24:38 Check angles 12:24:38 SkyScan query 12:24:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:24:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:24:39 Message to Master queued w/err=0: serial=10043 error=0 12:24:44 Received message from Master: op=Filter serial=10044 12:24:44 Color wheel filter change from 0 to 0 12:24:44 FLIGetFilterPos err=0 currentPosition=0 12:24:44 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:44 Filter is already there-color wheel unchanged 12:24:44 Received message from Master: op=Shutter serial=10045 12:24:44 Shutter LASER open 12:24:44 Received message from Camera: op=State serial=10047 12:24:44 GetSingleValue result=40 Value=cccccccc 12:24:44 SkyScan query 12:24:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:24:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:45 Parameters OK 12:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:45 Set A/D data flow result=40 12:24:45 Set A/D channel type result=40 12:24:45 Set A/D encoding result=40 12:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:45 Set channel filter=0.000000e+000 result=40 12:24:45 Config A/D Result=40 12:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:45 Get A/D filter: -9.255963e+061 result=40 12:24:45 Get A/D value=-858993460 result=40 12:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:45 Parameters OK 12:24:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:45 Set A/D data flow result=40 12:24:45 Set A/D channel type result=40 12:24:45 Set A/D encoding result=40 12:24:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:45 Set channel filter=0.000000e+000 result=40 12:24:45 Config A/D Result=40 12:24:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:45 Get A/D filter: -9.255963e+061 result=40 12:24:45 Get A/D value=-858993460 result=40 12:24:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:45 Aux= 12:24:45 Message to Camera, serial 10047 queued 12:24:47 Received message from Master: op=Shutter serial=10051 12:24:47 Shutter LASER close 12:24:48 Received message from Master: op=PointingHead serial=10055 12:24:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:24:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:24:48 Point started: ret=0 12:24:48 point_skyscan result=0 12:24:49 Check angles 12:24:49 SkyScan query 12:24:50 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.115<-21541 Statuses=0009 0009 12:24:50 Msec=0 True Az=136.185 Ze=-143.115 Az status=0009 Ze status=0009 12:24:50 Check angles 12:24:50 SkyScan query 12:24:50 SkyScan query done: ret=0 az=153.72<-10248 ze=-122.04<-20136 Statuses=0009 0009 12:24:50 Msec=750 True Az=153.72 Ze=-122.04 Az status=0009 Ze status=0009 12:24:51 Check angles 12:24:51 SkyScan query 12:24:51 SkyScan query done: ret=0 az=171.48<-11432 ze=-100.785<-18719 Statuses=0009 0009 12:24:51 Msec=1500 True Az=171.48 Ze=-100.785 Az status=0009 Ze status=0009 12:24:51 Check angles 12:24:51 SkyScan query 12:24:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.35<-17290 Statuses=0008 0009 12:24:52 Msec=2250 True Az=176.01 Ze=-79.35 Az status=0008 Ze status=0009 12:24:52 Check angles 12:24:52 SkyScan query 12:24:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.395<-15893 Statuses=0008 0009 12:24:53 Msec=3000 True Az=175.995 Ze=-58.395 Az status=0008 Ze status=0009 12:24:53 Check angles 12:24:53 SkyScan query 12:24:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:24:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:24:53 Message to Master queued w/err=0: serial=10055 error=0 12:24:58 Received message from Master: op=Filter serial=10056 12:24:58 Color wheel filter change from 0 to 0 12:24:58 FLIGetFilterPos err=0 currentPosition=0 12:24:58 FLIGetStepsRemaining err=0 RemainingSteps=0 12:24:58 Filter is already there-color wheel unchanged 12:24:59 Received message from Master: op=Shutter serial=10057 12:24:59 Shutter LASER close 12:24:59 Received message from Camera: op=State serial=10059 12:24:59 GetSingleValue result=40 Value=cccccccc 12:24:59 SkyScan query 12:24:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:24:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:59 Parameters OK 12:24:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:59 Set A/D data flow result=40 12:24:59 Set A/D channel type result=40 12:24:59 Set A/D encoding result=40 12:24:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:59 Set channel filter=0.000000e+000 result=40 12:24:59 Config A/D Result=40 12:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:59 Get A/D filter: -9.255963e+061 result=40 12:24:59 Get A/D value=-858993460 result=40 12:24:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:24:59 Parameters OK 12:24:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:24:59 Set A/D data flow result=40 12:24:59 Set A/D channel type result=40 12:24:59 Set A/D encoding result=40 12:24:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:24:59 Set channel filter=0.000000e+000 result=40 12:24:59 Config A/D Result=40 12:24:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:24:59 Get A/D filter: -9.255963e+061 result=40 12:24:59 Get A/D value=-858993460 result=40 12:24:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:24:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:24:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:24:59 Aux= 12:24:59 Message to Camera, serial 10059 queued 12:25:30 Received message from Master: op=PointingHead serial=10066 12:25:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:25:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:25:30 Point started: ret=0 12:25:30 point_skyscan result=0 12:25:31 Check angles 12:25:31 SkyScan query 12:25:32 SkyScan query done: ret=0 az=152.73<-10182 ze=-21.39<-13426 Statuses=0009 0009 12:25:32 Msec=0 True Az=152.73 Ze=-21.39 Az status=0009 Ze status=0009 12:25:32 Check angles 12:25:32 SkyScan query 12:25:33 SkyScan query done: ret=0 az=135.195<-9013 ze=-0.39<-12026 Statuses=0009 0009 12:25:33 Msec=750 True Az=135.195 Ze=-0.39 Az status=0009 Ze status=0009 12:25:33 Check angles 12:25:33 SkyScan query 12:25:33 SkyScan query done: ret=0 az=117.735<-7849 ze=20.55<-10630 Statuses=0009 0009 12:25:33 Msec=1500 True Az=117.735 Ze=20.55 Az status=0009 Ze status=0009 12:25:33 Check angles 12:25:33 SkyScan query 12:25:34 SkyScan query done: ret=0 az=100.005<-6667 ze=41.925<-9205 Statuses=0009 0009 12:25:34 Msec=2250 True Az=100.005 Ze=41.925 Az status=0009 Ze status=0009 12:25:34 Check angles 12:25:34 SkyScan query 12:25:35 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 12:25:35 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 12:25:35 Check angles 12:25:35 SkyScan query 12:25:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:25:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:25:36 Message to Master queued w/err=0: serial=10066 error=0 12:25:41 Received message from Master: op=Filter serial=10067 12:25:41 Color wheel filter change from 0 to 0 12:25:41 FLIGetFilterPos err=0 currentPosition=0 12:25:41 FLIGetStepsRemaining err=0 RemainingSteps=0 12:25:41 Filter is already there-color wheel unchanged 12:25:41 Received message from Master: op=Shutter serial=10068 12:25:41 Shutter LASER close 12:25:41 Received message from Camera: op=State serial=10070 12:25:41 GetSingleValue result=40 Value=cccccccc 12:25:41 SkyScan query 12:25:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:25:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:41 Parameters OK 12:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:41 Set A/D data flow result=40 12:25:41 Set A/D channel type result=40 12:25:41 Set A/D encoding result=40 12:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:41 Set channel filter=0.000000e+000 result=40 12:25:41 Config A/D Result=40 12:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:41 Get A/D filter: -9.255963e+061 result=40 12:25:41 Get A/D value=-858993460 result=40 12:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:25:41 Parameters OK 12:25:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:25:41 Set A/D data flow result=40 12:25:41 Set A/D channel type result=40 12:25:41 Set A/D encoding result=40 12:25:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:25:41 Set channel filter=0.000000e+000 result=40 12:25:41 Config A/D Result=40 12:25:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:25:41 Get A/D filter: -9.255963e+061 result=40 12:25:41 Get A/D value=-858993460 result=40 12:25:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:25:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:25:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:25:41 Aux= 12:25:41 Message to Camera, serial 10070 queued 12:26:12 Received message from Master: op=PointingHead serial=10077 12:26:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:26:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:26:13 Point started: ret=0 12:26:13 point_skyscan result=0 12:26:13 Check angles 12:26:13 SkyScan query 12:26:14 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 12:26:14 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 12:26:14 Check angles 12:26:14 SkyScan query 12:26:15 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 12:26:15 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 12:26:15 Check angles 12:26:15 SkyScan query 12:26:15 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 12:26:15 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 12:26:16 Check angles 12:26:16 SkyScan query 12:26:16 SkyScan query done: ret=0 az=161.37<-10758 ze=38.505<-9433 Statuses=0009 0008 12:26:16 Msec=2250 True Az=161.37 Ze=38.505 Az status=0009 Ze status=0008 12:26:16 Check angles 12:26:16 SkyScan query 12:26:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:26:17 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:26:17 Check angles 12:26:17 SkyScan query 12:26:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:26:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:26:18 Message to Master queued w/err=0: serial=10077 error=0 12:26:23 Received message from Master: op=Filter serial=10078 12:26:23 Color wheel filter change from 0 to 0 12:26:23 FLIGetFilterPos err=0 currentPosition=0 12:26:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:26:23 Filter is already there-color wheel unchanged 12:26:23 Received message from Master: op=Shutter serial=10079 12:26:23 Shutter LASER close 12:26:23 Received message from Camera: op=State serial=10081 12:26:23 GetSingleValue result=40 Value=cccccccc 12:26:23 SkyScan query 12:26:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:26:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:23 Parameters OK 12:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:23 Set A/D data flow result=40 12:26:23 Set A/D channel type result=40 12:26:23 Set A/D encoding result=40 12:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:23 Set channel filter=0.000000e+000 result=40 12:26:23 Config A/D Result=40 12:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:23 Get A/D filter: -9.255963e+061 result=40 12:26:23 Get A/D value=-858993460 result=40 12:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:26:23 Parameters OK 12:26:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:26:23 Set A/D data flow result=40 12:26:23 Set A/D channel type result=40 12:26:23 Set A/D encoding result=40 12:26:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:26:23 Set channel filter=0.000000e+000 result=40 12:26:23 Config A/D Result=40 12:26:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:26:23 Get A/D filter: -9.255963e+061 result=40 12:26:23 Get A/D value=-858993460 result=40 12:26:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:26:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:26:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:26:23 Aux= 12:26:23 Message to Camera, serial 10081 queued 12:26:54 Received message from Master: op=PointingHead serial=10088 12:26:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:26:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:26:55 Point started: ret=0 12:26:55 point_skyscan result=0 12:26:55 Check angles 12:26:55 SkyScan query 12:26:56 SkyScan query done: ret=0 az=152.79<-10186 ze=8.43<-11438 Statuses=0009 0009 12:26:56 Msec=0 True Az=152.79 Ze=8.43 Az status=0009 Ze status=0009 12:26:56 Check angles 12:26:56 SkyScan query 12:26:57 SkyScan query done: ret=0 az=135.015<-9001 ze=-12.975<-12865 Statuses=0009 0009 12:26:57 Msec=750 True Az=135.015 Ze=-12.975 Az status=0009 Ze status=0009 12:26:57 Check angles 12:26:57 SkyScan query 12:26:58 SkyScan query done: ret=0 az=117.435<-7829 ze=-33.9<-14260 Statuses=0009 0009 12:26:58 Msec=1500 True Az=117.435 Ze=-33.9 Az status=0009 Ze status=0009 12:26:58 Check angles 12:26:58 SkyScan query 12:26:58 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 12:26:58 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 12:26:58 Check angles 12:26:58 SkyScan query 12:26:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 12:26:59 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 12:26:59 Check angles 12:26:59 SkyScan query 12:27:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:27:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:27:00 Message to Master queued w/err=0: serial=10088 error=0 12:27:05 Received message from Master: op=Filter serial=10089 12:27:05 Color wheel filter change from 0 to 0 12:27:05 FLIGetFilterPos err=0 currentPosition=0 12:27:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:05 Filter is already there-color wheel unchanged 12:27:05 Received message from Master: op=Shutter serial=10090 12:27:05 Shutter LASER close 12:27:05 Received message from Camera: op=State serial=10092 12:27:05 GetSingleValue result=40 Value=cccccccc 12:27:05 SkyScan query 12:27:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:27:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:06 Parameters OK 12:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:06 Set A/D data flow result=40 12:27:06 Set A/D channel type result=40 12:27:06 Set A/D encoding result=40 12:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:06 Set channel filter=0.000000e+000 result=40 12:27:06 Config A/D Result=40 12:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:06 Get A/D filter: -9.255963e+061 result=40 12:27:06 Get A/D value=-858993460 result=40 12:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:06 Parameters OK 12:27:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:06 Set A/D data flow result=40 12:27:06 Set A/D channel type result=40 12:27:06 Set A/D encoding result=40 12:27:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:06 Set channel filter=0.000000e+000 result=40 12:27:06 Config A/D Result=40 12:27:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:06 Get A/D filter: -9.255963e+061 result=40 12:27:06 Get A/D value=-858993460 result=40 12:27:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:06 Aux= 12:27:06 Message to Camera, serial 10092 queued 12:27:36 Received message from Master: op=PointingHead serial=10099 12:27:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:27:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:27:37 Point started: ret=0 12:27:37 point_skyscan result=0 12:27:38 Check angles 12:27:38 SkyScan query 12:27:38 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.525<-17435 Statuses=0009 0009 12:27:38 Msec=0 True Az=109.155 Ze=-81.525 Az status=0009 Ze status=0009 12:27:38 Check angles 12:27:38 SkyScan query 12:27:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 12:27:39 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 12:27:39 Check angles 12:27:39 SkyScan query 12:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 12:27:40 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 12:27:40 Check angles 12:27:40 SkyScan query 12:27:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 12:27:40 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 12:27:41 Check angles 12:27:41 SkyScan query 12:27:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.155<-23077 Statuses=0008 0009 12:27:41 Msec=3000 True Az=112.995 Ze=-166.155 Az status=0008 Ze status=0009 12:27:41 Check angles 12:27:41 SkyScan query 12:27:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 12:27:42 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 12:27:42 Message to Master queued w/err=0: serial=10099 error=0 12:27:47 Received message from Master: op=Filter serial=10100 12:27:47 Color wheel filter change from 0 to 0 12:27:47 FLIGetFilterPos err=0 currentPosition=0 12:27:47 FLIGetStepsRemaining err=0 RemainingSteps=0 12:27:47 Filter is already there-color wheel unchanged 12:27:47 Received message from Master: op=Shutter serial=10101 12:27:47 Shutter LASER open 12:27:47 Received message from Camera: op=State serial=10103 12:27:47 GetSingleValue result=40 Value=cccccccc 12:27:47 SkyScan query 12:27:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:27:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:48 Parameters OK 12:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:48 Set A/D data flow result=40 12:27:48 Set A/D channel type result=40 12:27:48 Set A/D encoding result=40 12:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:48 Set channel filter=0.000000e+000 result=40 12:27:48 Config A/D Result=40 12:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:48 Get A/D filter: -9.255963e+061 result=40 12:27:48 Get A/D value=-858993460 result=40 12:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:27:48 Parameters OK 12:27:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:27:48 Set A/D data flow result=40 12:27:48 Set A/D channel type result=40 12:27:48 Set A/D encoding result=40 12:27:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:27:48 Set channel filter=0.000000e+000 result=40 12:27:48 Config A/D Result=40 12:27:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:27:48 Get A/D filter: -9.255963e+061 result=40 12:27:48 Get A/D value=-858993460 result=40 12:27:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:27:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:27:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:27:48 Aux= 12:27:48 Message to Camera, serial 10103 queued 12:27:50 Received message from Master: op=Shutter serial=10107 12:27:50 Shutter LASER close 12:27:51 Received message from Master: op=PointingHead serial=10111 12:27:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:27:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:27:51 Point started: ret=0 12:27:51 point_skyscan result=0 12:27:52 Check angles 12:27:52 SkyScan query 12:27:52 SkyScan query done: ret=0 az=89.49<-5966 ze=156.735<-1551 Statuses=0009 0009 12:27:52 Msec=0 True Az=89.49 Ze=156.735 Az status=0009 Ze status=0009 12:27:53 Check angles 12:27:53 SkyScan query 12:27:53 SkyScan query done: ret=0 az=72.015<-4801 ze=135.75<-2950 Statuses=0009 0009 12:27:53 Msec=750 True Az=72.015 Ze=135.75 Az status=0009 Ze status=0009 12:27:53 Check angles 12:27:53 SkyScan query 12:27:54 SkyScan query done: ret=0 az=54.69<-3646 ze=114.825<-4345 Statuses=0009 0009 12:27:54 Msec=1500 True Az=54.69 Ze=114.825 Az status=0009 Ze status=0009 12:27:54 Check angles 12:27:54 SkyScan query 12:27:55 SkyScan query done: ret=0 az=40.935<-2729 ze=93.405<-5773 Statuses=0009 0009 12:27:55 Msec=2250 True Az=40.935 Ze=93.405 Az status=0009 Ze status=0009 12:27:55 Check angles 12:27:55 SkyScan query 12:27:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.45<-7170 Statuses=0008 0009 12:27:55 Msec=3000 True Az=40.995 Ze=72.45 Az status=0008 Ze status=0009 12:27:56 Check angles 12:27:56 SkyScan query 12:27:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.065<-8529 Statuses=0008 0009 12:27:56 Msec=3750 True Az=40.995 Ze=52.065 Az status=0008 Ze status=0009 12:27:56 Check angles 12:27:56 SkyScan query 12:27:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:27:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:27:57 Message to Master queued w/err=0: serial=10111 error=0 12:28:02 Received message from Master: op=Filter serial=10112 12:28:02 Color wheel filter change from 0 to 0 12:28:02 FLIGetFilterPos err=0 currentPosition=0 12:28:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:02 Filter is already there-color wheel unchanged 12:28:02 Received message from Master: op=Shutter serial=10113 12:28:02 Shutter LASER close 12:28:02 Received message from Camera: op=State serial=10115 12:28:02 GetSingleValue result=40 Value=cccccccc 12:28:02 SkyScan query 12:28:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:28:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:03 Parameters OK 12:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:03 Set A/D data flow result=40 12:28:03 Set A/D channel type result=40 12:28:03 Set A/D encoding result=40 12:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:03 Set channel filter=0.000000e+000 result=40 12:28:03 Config A/D Result=40 12:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:03 Get A/D filter: -9.255963e+061 result=40 12:28:03 Get A/D value=-858993460 result=40 12:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:03 Parameters OK 12:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:03 Set A/D data flow result=40 12:28:03 Set A/D channel type result=40 12:28:03 Set A/D encoding result=40 12:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:03 Set channel filter=0.000000e+000 result=40 12:28:03 Config A/D Result=40 12:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:03 Get A/D filter: -9.255963e+061 result=40 12:28:03 Get A/D value=-858993460 result=40 12:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:03 Aux= 12:28:03 Message to Camera, serial 10115 queued 12:28:34 Received message from Master: op=PointingHead serial=10122 12:28:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:28:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:28:34 Point started: ret=0 12:28:34 point_skyscan result=0 12:28:35 Check angles 12:28:35 SkyScan query 12:28:35 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 12:28:35 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 12:28:36 Check angles 12:28:36 SkyScan query 12:28:36 SkyScan query done: ret=0 az=81.48<-5432 ze=66.495<-7567 Statuses=0009 0008 12:28:36 Msec=750 True Az=81.48 Ze=66.495 Az status=0009 Ze status=0008 12:28:36 Check angles 12:28:36 SkyScan query 12:28:37 SkyScan query done: ret=0 az=99.405<-6627 ze=66.495<-7567 Statuses=0009 0008 12:28:37 Msec=1500 True Az=99.405 Ze=66.495 Az status=0009 Ze status=0008 12:28:37 Check angles 12:28:37 SkyScan query 12:28:38 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 12:28:38 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 12:28:38 Check angles 12:28:38 SkyScan query 12:28:38 SkyScan query done: ret=0 az=134.31<-8954 ze=66.495<-7567 Statuses=0009 0008 12:28:38 Msec=3000 True Az=134.31 Ze=66.495 Az status=0009 Ze status=0008 12:28:39 Check angles 12:28:39 SkyScan query 12:28:39 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 12:28:39 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 12:28:39 Check angles 12:28:39 SkyScan query 12:28:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:28:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:28:40 Message to Master queued w/err=0: serial=10122 error=0 12:28:45 Received message from Master: op=Filter serial=10123 12:28:45 Color wheel filter change from 0 to 0 12:28:45 FLIGetFilterPos err=0 currentPosition=0 12:28:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:28:45 Filter is already there-color wheel unchanged 12:28:45 Received message from Master: op=Shutter serial=10124 12:28:45 Shutter LASER close 12:28:45 Received message from Camera: op=State serial=10126 12:28:45 GetSingleValue result=40 Value=cccccccc 12:28:45 SkyScan query 12:28:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:28:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:46 Parameters OK 12:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:46 Set A/D data flow result=40 12:28:46 Set A/D channel type result=40 12:28:46 Set A/D encoding result=40 12:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:46 Set channel filter=0.000000e+000 result=40 12:28:46 Config A/D Result=40 12:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:46 Get A/D filter: -9.255963e+061 result=40 12:28:46 Get A/D value=-858993460 result=40 12:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:28:46 Parameters OK 12:28:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:28:46 Set A/D data flow result=40 12:28:46 Set A/D channel type result=40 12:28:46 Set A/D encoding result=40 12:28:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:28:46 Set channel filter=0.000000e+000 result=40 12:28:46 Config A/D Result=40 12:28:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:28:46 Get A/D filter: -9.255963e+061 result=40 12:28:46 Get A/D value=-858993460 result=40 12:28:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:28:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:28:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:28:46 Aux= 12:28:46 Message to Camera, serial 10126 queued 12:29:17 Received message from Master: op=PointingHead serial=10133 12:29:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:29:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:29:17 Point started: ret=0 12:29:17 point_skyscan result=0 12:29:18 Check angles 12:29:18 SkyScan query 12:29:18 SkyScan query done: ret=0 az=135.21<-9014 ze=36.975<-9535 Statuses=0009 0009 12:29:18 Msec=0 True Az=135.21 Ze=36.975 Az status=0009 Ze status=0009 12:29:18 Check angles 12:29:18 SkyScan query 12:29:19 SkyScan query done: ret=0 az=117.735<-7849 ze=16.005<-10933 Statuses=0009 0009 12:29:19 Msec=750 True Az=117.735 Ze=16.005 Az status=0009 Ze status=0009 [UTC 2018-12-4 12:29:19] 12:29:19 Check angles 12:29:19 SkyScan query 12:29:20 SkyScan query done: ret=0 az=98.82<-6588 ze=-6.675<-12445 Statuses=0009 0009 12:29:20 Msec=1500 True Az=98.82 Ze=-6.675 Az status=0009 Ze status=0009 12:29:20 Check angles 12:29:20 SkyScan query 12:29:20 SkyScan query done: ret=0 az=82.785<-5519 ze=-25.95<-13730 Statuses=0009 0009 12:29:20 Msec=2250 True Az=82.785 Ze=-25.95 Az status=0009 Ze status=0009 12:29:21 Check angles 12:29:21 SkyScan query 12:29:21 SkyScan query done: ret=0 az=65.52<-4368 ze=-38.565<-14571 Statuses=0009 0008 12:29:21 Msec=3000 True Az=65.52 Ze=-38.565 Az status=0009 Ze status=0008 12:29:21 Check angles 12:29:21 SkyScan query 12:29:22 SkyScan query done: ret=0 az=47.655<-3177 ze=-38.535<-14569 Statuses=0009 0008 12:29:22 Msec=3750 True Az=47.655 Ze=-38.535 Az status=0009 Ze status=0008 12:29:22 Check angles 12:29:22 SkyScan query 12:29:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:29:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:29:23 Message to Master queued w/err=0: serial=10133 error=0 12:29:28 Received message from Master: op=Filter serial=10134 12:29:28 Color wheel filter change from 0 to 0 12:29:28 FLIGetFilterPos err=0 currentPosition=0 12:29:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:29:28 Filter is already there-color wheel unchanged 12:29:28 Received message from Master: op=Shutter serial=10135 12:29:28 Shutter LASER close 12:29:28 Received message from Camera: op=State serial=10137 12:29:28 GetSingleValue result=40 Value=cccccccc 12:29:28 SkyScan query 12:29:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:29:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:28 Parameters OK 12:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:28 Set A/D data flow result=40 12:29:28 Set A/D channel type result=40 12:29:28 Set A/D encoding result=40 12:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:28 Set channel filter=0.000000e+000 result=40 12:29:28 Config A/D Result=40 12:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:28 Get A/D filter: -9.255963e+061 result=40 12:29:28 Get A/D value=-858993460 result=40 12:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:29:28 Parameters OK 12:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:29:28 Set A/D data flow result=40 12:29:28 Set A/D channel type result=40 12:29:28 Set A/D encoding result=40 12:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:29:28 Set channel filter=0.000000e+000 result=40 12:29:28 Config A/D Result=40 12:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:29:28 Get A/D filter: -9.255963e+061 result=40 12:29:28 Get A/D value=-858993460 result=40 12:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:29:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:29:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:29:28 Aux= 12:29:28 Message to Camera, serial 10137 queued 12:29:59 Received message from Master: op=PointingHead serial=10144 12:29:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:29:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:30:00 Point started: ret=0 12:30:00 point_skyscan result=0 12:30:01 Check angles 12:30:01 SkyScan query 12:30:01 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.49<-16566 Statuses=0009 0009 12:30:01 Msec=0 True Az=63.975 Ze=-68.49 Az status=0009 Ze status=0009 12:30:01 Check angles 12:30:01 SkyScan query 12:30:02 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.88<-17992 Statuses=0009 0009 12:30:02 Msec=750 True Az=82.035 Ze=-89.88 Az status=0009 Ze status=0009 12:30:02 Check angles 12:30:02 SkyScan query 12:30:03 SkyScan query done: ret=0 az=99.615<-6641 ze=-111.285<-19419 Statuses=0009 0009 12:30:03 Msec=1500 True Az=99.615 Ze=-111.285 Az status=0009 Ze status=0009 12:30:03 Check angles 12:30:03 SkyScan query 12:30:03 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.775<-20785 Statuses=0009 0009 12:30:03 Msec=2250 True Az=116.805 Ze=-131.775 Az status=0009 Ze status=0009 12:30:04 Check angles 12:30:04 SkyScan query 12:30:04 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0009 0008 12:30:04 Msec=3000 True Az=130.995 Ze=-141.525 Az status=0009 Ze status=0008 12:30:04 Check angles 12:30:04 SkyScan query 12:30:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 12:30:05 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 12:30:05 Message to Master queued w/err=0: serial=10144 error=0 12:30:10 Received message from Master: op=Filter serial=10145 12:30:10 Color wheel filter change from 0 to 0 12:30:10 FLIGetFilterPos err=0 currentPosition=0 12:30:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:10 Filter is already there-color wheel unchanged 12:30:10 Received message from Master: op=Shutter serial=10146 12:30:10 Shutter LASER close 12:30:10 Received message from Camera: op=State serial=10148 12:30:10 GetSingleValue result=40 Value=cccccccc 12:30:10 SkyScan query 12:30:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:30:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:11 Parameters OK 12:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:11 Set A/D data flow result=40 12:30:11 Set A/D channel type result=40 12:30:11 Set A/D encoding result=40 12:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:11 Set channel filter=0.000000e+000 result=40 12:30:11 Config A/D Result=40 12:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:11 Get A/D filter: -9.255963e+061 result=40 12:30:11 Get A/D value=-858993460 result=40 12:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:11 Parameters OK 12:30:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:11 Set A/D data flow result=40 12:30:11 Set A/D channel type result=40 12:30:11 Set A/D encoding result=40 12:30:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:11 Set channel filter=0.000000e+000 result=40 12:30:11 Config A/D Result=40 12:30:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:11 Get A/D filter: -9.255963e+061 result=40 12:30:11 Get A/D value=-858993460 result=40 12:30:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:11 Aux= 12:30:11 Message to Camera, serial 10148 queued 12:30:41 Received message from Master: op=PointingHead serial=10155 12:30:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:30:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:30:42 Point started: ret=0 12:30:42 point_skyscan result=0 12:30:43 Check angles 12:30:43 SkyScan query 12:30:43 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.195<-23413 Statuses=0009 0009 12:30:43 Msec=0 True Az=113.025 Ze=-171.195 Az status=0009 Ze status=0009 12:30:43 Check angles 12:30:43 SkyScan query 12:30:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:30:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:30:44 Message to Master queued w/err=0: serial=10155 error=0 12:30:49 Received message from Master: op=Filter serial=10156 12:30:49 Color wheel filter change from 0 to 0 12:30:49 FLIGetFilterPos err=0 currentPosition=0 12:30:49 FLIGetStepsRemaining err=0 RemainingSteps=0 12:30:49 Filter is already there-color wheel unchanged 12:30:49 Received message from Master: op=Shutter serial=10157 12:30:49 Shutter LASER open 12:30:49 Received message from Camera: op=State serial=10159 12:30:49 GetSingleValue result=40 Value=cccccccc 12:30:49 SkyScan query 12:30:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:30:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:50 Parameters OK 12:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:50 Set A/D data flow result=40 12:30:50 Set A/D channel type result=40 12:30:50 Set A/D encoding result=40 12:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:50 Set channel filter=0.000000e+000 result=40 12:30:50 Config A/D Result=40 12:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:50 Get A/D filter: -9.255963e+061 result=40 12:30:50 Get A/D value=-858993460 result=40 12:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:30:50 Parameters OK 12:30:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:30:50 Set A/D data flow result=40 12:30:50 Set A/D channel type result=40 12:30:50 Set A/D encoding result=40 12:30:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:30:50 Set channel filter=0.000000e+000 result=40 12:30:50 Config A/D Result=40 12:30:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:30:50 Get A/D filter: -9.255963e+061 result=40 12:30:50 Get A/D value=-858993460 result=40 12:30:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:30:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:30:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:30:50 Aux= 12:30:50 Message to Camera, serial 10159 queued 12:30:52 Received message from Master: op=Shutter serial=10163 12:30:52 Shutter LASER close 12:30:53 Received message from Master: op=PointingHead serial=10167 12:30:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:30:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:30:53 Point started: ret=0 12:30:53 point_skyscan result=0 12:30:54 Check angles 12:30:54 SkyScan query 12:30:55 SkyScan query done: ret=0 az=135.975<-9065 ze=-143.28<-21552 Statuses=0009 0009 12:30:55 Msec=0 True Az=135.975 Ze=-143.28 Az status=0009 Ze status=0009 12:30:55 Check angles 12:30:55 SkyScan query 12:30:55 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.325<-20155 Statuses=0009 0009 12:30:55 Msec=750 True Az=153.45 Ze=-122.325 Az status=0009 Ze status=0009 12:30:55 Check angles 12:30:55 SkyScan query 12:30:56 SkyScan query done: ret=0 az=170.97<-11398 ze=-101.37<-18758 Statuses=0009 0009 12:30:56 Msec=1500 True Az=170.97 Ze=-101.37 Az status=0009 Ze status=0009 12:30:56 Check angles 12:30:56 SkyScan query 12:30:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.415<-17361 Statuses=0008 0009 12:30:57 Msec=2250 True Az=176.025 Ze=-80.415 Az status=0008 Ze status=0009 12:30:57 Check angles 12:30:57 SkyScan query 12:30:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.445<-15963 Statuses=0008 0009 12:30:58 Msec=3000 True Az=176.01 Ze=-59.445 Az status=0008 Ze status=0009 12:30:58 Check angles 12:30:58 SkyScan query 12:30:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:30:58 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:30:58 Message to Master queued w/err=0: serial=10167 error=0 12:31:03 Received message from Master: op=Filter serial=10168 12:31:03 Color wheel filter change from 0 to 0 12:31:03 FLIGetFilterPos err=0 currentPosition=0 12:31:03 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:03 Filter is already there-color wheel unchanged 12:31:03 Received message from Master: op=Shutter serial=10169 12:31:03 Shutter LASER close 12:31:04 Received message from Camera: op=State serial=10171 12:31:04 GetSingleValue result=40 Value=cccccccc 12:31:04 SkyScan query 12:31:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:31:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:04 Parameters OK 12:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:04 Set A/D data flow result=40 12:31:04 Set A/D channel type result=40 12:31:04 Set A/D encoding result=40 12:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:04 Set channel filter=0.000000e+000 result=40 12:31:04 Config A/D Result=40 12:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:04 Get A/D filter: -9.255963e+061 result=40 12:31:04 Get A/D value=-858993460 result=40 12:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:04 Parameters OK 12:31:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:04 Set A/D data flow result=40 12:31:04 Set A/D channel type result=40 12:31:04 Set A/D encoding result=40 12:31:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:04 Set channel filter=0.000000e+000 result=40 12:31:04 Config A/D Result=40 12:31:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:04 Get A/D filter: -9.255963e+061 result=40 12:31:04 Get A/D value=-858993460 result=40 12:31:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:04 Aux= 12:31:04 Message to Camera, serial 10171 queued 12:31:35 Received message from Master: op=PointingHead serial=10178 12:31:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:31:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:31:35 Point started: ret=0 12:31:35 point_skyscan result=0 12:31:36 Check angles 12:31:36 SkyScan query 12:31:37 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.96<-13464 Statuses=0009 0009 12:31:37 Msec=0 True Az=152.985 Ze=-21.96 Az status=0009 Ze status=0009 12:31:37 Check angles 12:31:37 SkyScan query 12:31:37 SkyScan query done: ret=0 az=135.63<-9042 ze=-1.005<-12067 Statuses=0009 0009 12:31:37 Msec=750 True Az=135.63 Ze=-1.005 Az status=0009 Ze status=0009 12:31:38 Check angles 12:31:38 SkyScan query 12:31:38 SkyScan query done: ret=0 az=118.065<-7871 ze=19.98<-10668 Statuses=0009 0009 12:31:38 Msec=1500 True Az=118.065 Ze=19.98 Az status=0009 Ze status=0009 12:31:38 Check angles 12:31:38 SkyScan query 12:31:39 SkyScan query done: ret=0 az=100.725<-6715 ze=40.905<-9273 Statuses=0009 0009 12:31:39 Msec=2250 True Az=100.725 Ze=40.905 Az status=0009 Ze status=0009 12:31:39 Check angles 12:31:39 SkyScan query 12:31:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:31:40 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:31:40 Check angles 12:31:40 SkyScan query 12:31:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:31:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:31:40 Message to Master queued w/err=0: serial=10178 error=0 12:31:45 Received message from Master: op=Filter serial=10179 12:31:45 Color wheel filter change from 0 to 0 12:31:45 FLIGetFilterPos err=0 currentPosition=0 12:31:45 FLIGetStepsRemaining err=0 RemainingSteps=0 12:31:45 Filter is already there-color wheel unchanged 12:31:46 Received message from Master: op=Shutter serial=10180 12:31:46 Shutter LASER close 12:31:46 Received message from Camera: op=State serial=10182 12:31:46 GetSingleValue result=40 Value=cccccccc 12:31:46 SkyScan query 12:31:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:31:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:46 Parameters OK 12:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:46 Set A/D data flow result=40 12:31:46 Set A/D channel type result=40 12:31:46 Set A/D encoding result=40 12:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:46 Set channel filter=0.000000e+000 result=40 12:31:46 Config A/D Result=40 12:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:46 Get A/D filter: -9.255963e+061 result=40 12:31:46 Get A/D value=-858993460 result=40 12:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:31:46 Parameters OK 12:31:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:31:46 Set A/D data flow result=40 12:31:46 Set A/D channel type result=40 12:31:46 Set A/D encoding result=40 12:31:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:31:46 Set channel filter=0.000000e+000 result=40 12:31:46 Config A/D Result=40 12:31:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:31:46 Get A/D filter: -9.255963e+061 result=40 12:31:46 Get A/D value=-858993460 result=40 12:31:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:31:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:31:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:31:46 Aux= 12:31:46 Message to Camera, serial 10182 queued [UTC 2018-12-4 12:32:09] 12:32:17 Received message from Master: op=PointingHead serial=10189 12:32:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:32:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:32:18 Point started: ret=0 12:32:18 point_skyscan result=0 12:32:18 Check angles 12:32:18 SkyScan query 12:32:19 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 12:32:19 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 12:32:19 Check angles 12:32:19 SkyScan query 12:32:20 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 12:32:20 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 12:32:20 Check angles 12:32:20 SkyScan query 12:32:20 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 12:32:20 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 12:32:21 Check angles 12:32:21 SkyScan query 12:32:21 SkyScan query done: ret=0 az=161.655<-10777 ze=38.505<-9433 Statuses=0009 0008 12:32:21 Msec=2250 True Az=161.655 Ze=38.505 Az status=0009 Ze status=0008 12:32:21 Check angles 12:32:21 SkyScan query 12:32:22 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:32:22 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:32:22 Check angles 12:32:22 SkyScan query 12:32:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:32:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:32:23 Message to Master queued w/err=0: serial=10189 error=0 12:32:28 Received message from Master: op=Filter serial=10190 12:32:28 Color wheel filter change from 0 to 0 12:32:28 FLIGetFilterPos err=0 currentPosition=0 12:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 12:32:28 Filter is already there-color wheel unchanged 12:32:28 Received message from Master: op=Shutter serial=10191 12:32:28 Shutter LASER close 12:32:28 Received message from Camera: op=State serial=10193 12:32:28 GetSingleValue result=40 Value=cccccccc 12:32:28 SkyScan query 12:32:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:32:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:28 Parameters OK 12:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:28 Set A/D data flow result=40 12:32:28 Set A/D channel type result=40 12:32:28 Set A/D encoding result=40 12:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:28 Set channel filter=0.000000e+000 result=40 12:32:28 Config A/D Result=40 12:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:28 Get A/D filter: -9.255963e+061 result=40 12:32:28 Get A/D value=-858993460 result=40 12:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:32:28 Parameters OK 12:32:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:32:28 Set A/D data flow result=40 12:32:28 Set A/D channel type result=40 12:32:28 Set A/D encoding result=40 12:32:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:32:28 Set channel filter=0.000000e+000 result=40 12:32:28 Config A/D Result=40 12:32:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:32:28 Get A/D filter: -9.255963e+061 result=40 12:32:28 Get A/D value=-858993460 result=40 12:32:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:32:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:32:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:32:28 Aux= 12:32:28 Message to Camera, serial 10193 queued 12:32:59 Received message from Master: op=PointingHead serial=10200 12:32:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:32:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:33:00 Point started: ret=0 12:33:00 point_skyscan result=0 12:33:00 Check angles 12:33:00 SkyScan query 12:33:01 SkyScan query done: ret=0 az=152.97<-10198 ze=8.775<-11415 Statuses=0009 0009 12:33:01 Msec=0 True Az=152.97 Ze=8.775 Az status=0009 Ze status=0009 12:33:01 Check angles 12:33:01 SkyScan query 12:33:02 SkyScan query done: ret=0 az=135.69<-9046 ze=-12.18<-12812 Statuses=0009 0009 12:33:02 Msec=750 True Az=135.69 Ze=-12.18 Az status=0009 Ze status=0009 12:33:02 Check angles 12:33:02 SkyScan query 12:33:02 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.135<-14209 Statuses=0009 0009 12:33:02 Msec=1500 True Az=118.125 Ze=-33.135 Az status=0009 Ze status=0009 12:33:03 Check angles 12:33:03 SkyScan query 12:33:03 SkyScan query done: ret=0 az=100.695<-6713 ze=-51.51<-15434 Statuses=0009 0009 12:33:03 Msec=2250 True Az=100.695 Ze=-51.51 Az status=0009 Ze status=0009 12:33:03 Check angles 12:33:03 SkyScan query 12:33:04 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 12:33:04 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 12:33:04 Check angles 12:33:04 SkyScan query 12:33:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 12:33:05 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 12:33:05 Message to Master queued w/err=0: serial=10200 error=0 12:33:10 Received message from Master: op=Filter serial=10201 12:33:10 Color wheel filter change from 0 to 0 12:33:10 FLIGetFilterPos err=0 currentPosition=0 12:33:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:10 Filter is already there-color wheel unchanged 12:33:10 Received message from Master: op=Shutter serial=10202 12:33:10 Shutter LASER close 12:33:10 Received message from Camera: op=State serial=10204 12:33:10 GetSingleValue result=40 Value=cccccccc 12:33:10 SkyScan query 12:33:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:33:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:10 Parameters OK 12:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:10 Set A/D data flow result=40 12:33:10 Set A/D channel type result=40 12:33:10 Set A/D encoding result=40 12:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:10 Set channel filter=0.000000e+000 result=40 12:33:10 Config A/D Result=40 12:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:10 Get A/D filter: -9.255963e+061 result=40 12:33:10 Get A/D value=-858993460 result=40 12:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:10 Parameters OK 12:33:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:10 Set A/D data flow result=40 12:33:10 Set A/D channel type result=40 12:33:10 Set A/D encoding result=40 12:33:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:10 Set channel filter=0.000000e+000 result=40 12:33:10 Config A/D Result=40 12:33:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:10 Get A/D filter: -9.255963e+061 result=40 12:33:10 Get A/D value=-858993460 result=40 12:33:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:10 Aux= 12:33:10 Message to Camera, serial 10204 queued 12:33:41 Received message from Master: op=PointingHead serial=10211 12:33:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:33:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:33:42 Point started: ret=0 12:33:42 point_skyscan result=0 12:33:42 Check angles 12:33:42 SkyScan query 12:33:43 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.48<-17432 Statuses=0009 0009 12:33:43 Msec=0 True Az=109.17 Ze=-81.48 Az status=0009 Ze status=0009 12:33:43 Check angles 12:33:43 SkyScan query 12:33:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.42<-18828 Statuses=0008 0009 12:33:44 Msec=750 True Az=112.995 Ze=-102.42 Az status=0008 Ze status=0009 12:33:44 Check angles 12:33:44 SkyScan query 12:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.81<-20254 Statuses=0008 0009 12:33:45 Msec=1500 True Az=112.995 Ze=-123.81 Az status=0008 Ze status=0009 12:33:45 Check angles 12:33:45 SkyScan query 12:33:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.765<-21651 Statuses=0008 0009 12:33:45 Msec=2250 True Az=112.995 Ze=-144.765 Az status=0008 Ze status=0009 12:33:45 Check angles 12:33:45 SkyScan query 12:33:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.705<-23047 Statuses=0008 0009 12:33:46 Msec=3000 True Az=112.995 Ze=-165.705 Az status=0008 Ze status=0009 12:33:46 Check angles 12:33:46 SkyScan query 12:33:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 12:33:47 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 12:33:47 Message to Master queued w/err=0: serial=10211 error=0 12:33:52 Received message from Master: op=Filter serial=10212 12:33:52 Color wheel filter change from 0 to 0 12:33:52 FLIGetFilterPos err=0 currentPosition=0 12:33:52 FLIGetStepsRemaining err=0 RemainingSteps=0 12:33:52 Filter is already there-color wheel unchanged 12:33:52 Received message from Master: op=Shutter serial=10213 12:33:52 Shutter LASER open 12:33:52 Received message from Camera: op=State serial=10215 12:33:52 GetSingleValue result=40 Value=cccccccc 12:33:52 SkyScan query 12:33:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:33:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:53 Parameters OK 12:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:53 Set A/D data flow result=40 12:33:53 Set A/D channel type result=40 12:33:53 Set A/D encoding result=40 12:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:53 Set channel filter=0.000000e+000 result=40 12:33:53 Config A/D Result=40 12:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:53 Get A/D filter: -9.255963e+061 result=40 12:33:53 Get A/D value=-858993460 result=40 12:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:33:53 Parameters OK 12:33:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:33:53 Set A/D data flow result=40 12:33:53 Set A/D channel type result=40 12:33:53 Set A/D encoding result=40 12:33:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:33:53 Set channel filter=0.000000e+000 result=40 12:33:53 Config A/D Result=40 12:33:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:33:53 Get A/D filter: -9.255963e+061 result=40 12:33:53 Get A/D value=-858993460 result=40 12:33:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:33:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:33:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:33:53 Aux= 12:33:53 Message to Camera, serial 10215 queued 12:33:55 Received message from Master: op=Shutter serial=10219 12:33:55 Shutter LASER close 12:33:56 Received message from Master: op=PointingHead serial=10223 12:33:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:33:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:33:56 Point started: ret=0 12:33:56 point_skyscan result=0 12:33:57 Check angles 12:33:57 SkyScan query 12:33:57 SkyScan query done: ret=0 az=89.58<-5972 ze=156.87<-1542 Statuses=0009 0009 12:33:57 Msec=0 True Az=89.58 Ze=156.87 Az status=0009 Ze status=0009 12:33:57 Check angles 12:33:57 SkyScan query 12:33:58 SkyScan query done: ret=0 az=72.12<-4808 ze=135.9<-2940 Statuses=0009 0009 12:33:58 Msec=750 True Az=72.12 Ze=135.9 Az status=0009 Ze status=0009 12:33:58 Check angles 12:33:58 SkyScan query 12:33:59 SkyScan query done: ret=0 az=54.765<-3651 ze=114.945<-4337 Statuses=0009 0009 12:33:59 Msec=1500 True Az=54.765 Ze=114.945 Az status=0009 Ze status=0009 12:33:59 Check angles 12:33:59 SkyScan query 12:34:00 SkyScan query done: ret=0 az=40.86<-2724 ze=93.99<-5734 Statuses=0009 0009 12:34:00 Msec=2250 True Az=40.86 Ze=93.99 Az status=0009 Ze status=0009 12:34:00 Check angles 12:34:00 SkyScan query 12:34:00 SkyScan query done: ret=0 az=41.01<-2734 ze=73.02<-7132 Statuses=0008 0009 12:34:00 Msec=3000 True Az=41.01 Ze=73.02 Az status=0008 Ze status=0009 12:34:00 Check angles 12:34:00 SkyScan query 12:34:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 12:34:01 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 12:34:01 Check angles 12:34:01 SkyScan query 12:34:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:34:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:34:02 Message to Master queued w/err=0: serial=10223 error=0 12:34:07 Received message from Master: op=Filter serial=10224 12:34:07 Color wheel filter change from 0 to 0 12:34:07 FLIGetFilterPos err=0 currentPosition=0 12:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:07 Filter is already there-color wheel unchanged 12:34:07 Received message from Master: op=Shutter serial=10225 12:34:07 Shutter LASER close 12:34:07 Received message from Camera: op=State serial=10227 12:34:07 GetSingleValue result=40 Value=cccccccc 12:34:07 SkyScan query 12:34:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:08 Parameters OK 12:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:08 Set A/D data flow result=40 12:34:08 Set A/D channel type result=40 12:34:08 Set A/D encoding result=40 12:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:08 Set channel filter=0.000000e+000 result=40 12:34:08 Config A/D Result=40 12:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:08 Get A/D filter: -9.255963e+061 result=40 12:34:08 Get A/D value=-858993460 result=40 12:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:08 Parameters OK 12:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:08 Set A/D data flow result=40 12:34:08 Set A/D channel type result=40 12:34:08 Set A/D encoding result=40 12:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:08 Set channel filter=0.000000e+000 result=40 12:34:08 Config A/D Result=40 12:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:08 Get A/D filter: -9.255963e+061 result=40 12:34:08 Get A/D value=-858993460 result=40 12:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:08 Aux= 12:34:08 Message to Camera, serial 10227 queued 12:34:39 Received message from Master: op=PointingHead serial=10234 12:34:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:34:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:34:39 Point started: ret=0 12:34:39 point_skyscan result=0 12:34:40 Check angles 12:34:40 SkyScan query 12:34:40 SkyScan query done: ret=0 az=63.9<-4260 ze=66.555<-7563 Statuses=0009 0008 12:34:40 Msec=0 True Az=63.9 Ze=66.555 Az status=0009 Ze status=0008 12:34:40 Check angles 12:34:40 SkyScan query 12:34:41 SkyScan query done: ret=0 az=81.84<-5456 ze=66.495<-7567 Statuses=0009 0008 12:34:41 Msec=750 True Az=81.84 Ze=66.495 Az status=0009 Ze status=0008 12:34:41 Check angles 12:34:41 SkyScan query 12:34:42 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 12:34:42 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 12:34:42 Check angles 12:34:42 SkyScan query 12:34:43 SkyScan query done: ret=0 az=117.15<-7810 ze=66.495<-7567 Statuses=0009 0008 12:34:43 Msec=2250 True Az=117.15 Ze=66.495 Az status=0009 Ze status=0008 12:34:43 Check angles 12:34:43 SkyScan query 12:34:43 SkyScan query done: ret=0 az=134.685<-8979 ze=66.495<-7567 Statuses=0009 0008 12:34:43 Msec=3000 True Az=134.685 Ze=66.495 Az status=0009 Ze status=0008 12:34:43 Check angles 12:34:43 SkyScan query 12:34:44 SkyScan query done: ret=0 az=151.95<-10130 ze=66.495<-7567 Statuses=0009 0008 12:34:44 Msec=3750 True Az=151.95 Ze=66.495 Az status=0009 Ze status=0008 12:34:44 Check angles 12:34:44 SkyScan query 12:34:45 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:34:45 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:34:45 Message to Master queued w/err=0: serial=10234 error=0 12:34:50 Received message from Master: op=Filter serial=10235 12:34:50 Color wheel filter change from 0 to 0 12:34:50 FLIGetFilterPos err=0 currentPosition=0 12:34:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:34:50 Filter is already there-color wheel unchanged 12:34:50 Received message from Master: op=Shutter serial=10236 12:34:50 Shutter LASER close 12:34:50 Received message from Camera: op=State serial=10238 12:34:50 GetSingleValue result=40 Value=cccccccc 12:34:50 SkyScan query 12:34:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:34:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:51 Parameters OK 12:34:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:51 Set A/D data flow result=40 12:34:51 Set A/D channel type result=40 12:34:51 Set A/D encoding result=40 12:34:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:51 Set channel filter=0.000000e+000 result=40 12:34:51 Config A/D Result=40 12:34:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:51 Get A/D filter: -9.255963e+061 result=40 12:34:51 Get A/D value=-858993460 result=40 12:34:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:34:51 Parameters OK 12:34:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:34:51 Set A/D data flow result=40 12:34:51 Set A/D channel type result=40 12:34:51 Set A/D encoding result=40 12:34:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:34:51 Set channel filter=0.000000e+000 result=40 12:34:51 Config A/D Result=40 12:34:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:34:51 Get A/D filter: -9.255963e+061 result=40 12:34:51 Get A/D value=-858993460 result=40 12:34:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:34:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:34:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:34:51 Aux= 12:34:51 Message to Camera, serial 10238 queued 12:35:21 Received message from Master: op=PointingHead serial=10245 12:35:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:35:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:35:22 Point started: ret=0 12:35:22 point_skyscan result=0 12:35:23 Check angles 12:35:23 SkyScan query 12:35:23 SkyScan query done: ret=0 az=135.18<-9012 ze=36.9<-9540 Statuses=0009 0009 12:35:23 Msec=0 True Az=135.18 Ze=36.9 Az status=0009 Ze status=0009 12:35:23 Check angles 12:35:23 SkyScan query 12:35:24 SkyScan query done: ret=0 az=117.735<-7849 ze=15.945<-10937 Statuses=0009 0009 12:35:24 Msec=750 True Az=117.735 Ze=15.945 Az status=0009 Ze status=0009 12:35:24 Check angles 12:35:24 SkyScan query 12:35:25 SkyScan query done: ret=0 az=99.825<-6655 ze=-5.46<-12364 Statuses=0009 0009 12:35:25 Msec=1500 True Az=99.825 Ze=-5.46 Az status=0009 Ze status=0009 12:35:25 Check angles 12:35:25 SkyScan query 12:35:25 SkyScan query done: ret=0 az=82.395<-5493 ze=-26.475<-13765 Statuses=0009 0009 12:35:25 Msec=2250 True Az=82.395 Ze=-26.475 Az status=0009 Ze status=0009 12:35:26 Check angles 12:35:26 SkyScan query 12:35:26 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.565<-14571 Statuses=0009 0008 12:35:26 Msec=3000 True Az=64.935 Ze=-38.565 Az status=0009 Ze status=0008 12:35:26 Check angles 12:35:26 SkyScan query 12:35:27 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.535<-14569 Statuses=0009 0008 12:35:27 Msec=3750 True Az=47.175 Ze=-38.535 Az status=0009 Ze status=0008 12:35:27 Check angles 12:35:27 SkyScan query 12:35:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:35:28 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:35:28 Message to Master queued w/err=0: serial=10245 error=0 12:35:33 Received message from Master: op=Filter serial=10246 12:35:33 Color wheel filter change from 0 to 0 12:35:33 FLIGetFilterPos err=0 currentPosition=0 12:35:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:35:33 Filter is already there-color wheel unchanged 12:35:33 Received message from Master: op=Shutter serial=10247 12:35:33 Shutter LASER close 12:35:33 Received message from Camera: op=State serial=10249 12:35:33 GetSingleValue result=40 Value=cccccccc 12:35:33 SkyScan query 12:35:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:35:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:33 Parameters OK 12:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:33 Set A/D data flow result=40 12:35:33 Set A/D channel type result=40 12:35:33 Set A/D encoding result=40 12:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:33 Set channel filter=0.000000e+000 result=40 12:35:33 Config A/D Result=40 12:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:33 Get A/D filter: -9.255963e+061 result=40 12:35:33 Get A/D value=-858993460 result=40 12:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:35:33 Parameters OK 12:35:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:35:33 Set A/D data flow result=40 12:35:33 Set A/D channel type result=40 12:35:33 Set A/D encoding result=40 12:35:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:35:33 Set channel filter=0.000000e+000 result=40 12:35:33 Config A/D Result=40 12:35:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:35:33 Get A/D filter: -9.255963e+061 result=40 12:35:33 Get A/D value=-858993460 result=40 12:35:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:35:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:35:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:35:33 Aux= 12:35:33 Message to Camera, serial 10249 queued 12:36:04 Received message from Master: op=PointingHead serial=10256 12:36:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:36:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:36:05 Point started: ret=0 12:36:05 point_skyscan result=0 12:36:05 Check angles 12:36:05 SkyScan query 12:36:06 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.115<-16541 Statuses=0009 0009 12:36:06 Msec=0 True Az=63.795 Ze=-68.115 Az status=0009 Ze status=0009 12:36:06 Check angles 12:36:06 SkyScan query 12:36:07 SkyScan query done: ret=0 az=81.18<-5412 ze=-89.085<-17939 Statuses=0009 0009 12:36:07 Msec=750 True Az=81.18 Ze=-89.085 Az status=0009 Ze status=0009 12:36:07 Check angles 12:36:07 SkyScan query 12:36:07 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.025<-19335 Statuses=0009 0009 12:36:07 Msec=1500 True Az=98.94 Ze=-110.025 Az status=0009 Ze status=0009 12:36:08 Check angles 12:36:08 SkyScan query 12:36:08 SkyScan query done: ret=0 az=116.31<-7754 ze=-130.965<-20731 Statuses=0009 0009 12:36:08 Msec=2250 True Az=116.31 Ze=-130.965 Az status=0009 Ze status=0009 12:36:08 Check angles 12:36:08 SkyScan query 12:36:09 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 12:36:09 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 12:36:09 Check angles 12:36:09 SkyScan query 12:36:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:36:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:36:10 Message to Master queued w/err=0: serial=10256 error=0 12:36:15 Received message from Master: op=Filter serial=10257 12:36:15 Color wheel filter change from 0 to 0 12:36:15 FLIGetFilterPos err=0 currentPosition=0 12:36:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:15 Filter is already there-color wheel unchanged 12:36:15 Received message from Master: op=Shutter serial=10258 12:36:15 Shutter LASER close 12:36:15 Received message from Camera: op=State serial=10260 12:36:15 GetSingleValue result=40 Value=cccccccc 12:36:15 SkyScan query 12:36:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:36:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:15 Parameters OK 12:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:15 Set A/D data flow result=40 12:36:15 Set A/D channel type result=40 12:36:15 Set A/D encoding result=40 12:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:15 Set channel filter=0.000000e+000 result=40 12:36:15 Config A/D Result=40 12:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:15 Get A/D filter: -9.255963e+061 result=40 12:36:15 Get A/D value=-858993460 result=40 12:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:15 Parameters OK 12:36:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:15 Set A/D data flow result=40 12:36:15 Set A/D channel type result=40 12:36:15 Set A/D encoding result=40 12:36:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:15 Set channel filter=0.000000e+000 result=40 12:36:15 Config A/D Result=40 12:36:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:15 Get A/D filter: -9.255963e+061 result=40 12:36:15 Get A/D value=-858993460 result=40 12:36:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:15 Aux= 12:36:15 Message to Camera, serial 10260 queued 12:36:46 Received message from Master: op=PointingHead serial=10267 12:36:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:36:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:36:47 Point started: ret=0 12:36:47 point_skyscan result=0 12:36:47 Check angles 12:36:47 SkyScan query 12:36:48 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.3<-23420 Statuses=0009 0009 12:36:48 Msec=0 True Az=113.025 Ze=-171.3 Az status=0009 Ze status=0009 12:36:48 Check angles 12:36:48 SkyScan query 12:36:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:36:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:36:49 Message to Master queued w/err=0: serial=10267 error=0 12:36:54 Received message from Master: op=Filter serial=10268 12:36:54 Color wheel filter change from 0 to 0 12:36:54 FLIGetFilterPos err=0 currentPosition=0 12:36:54 FLIGetStepsRemaining err=0 RemainingSteps=0 12:36:54 Filter is already there-color wheel unchanged 12:36:54 Received message from Master: op=Shutter serial=10269 12:36:54 Shutter LASER open 12:36:54 Received message from Camera: op=State serial=10271 12:36:54 GetSingleValue result=40 Value=cccccccc 12:36:54 SkyScan query 12:36:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:36:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:55 Parameters OK 12:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:55 Set A/D data flow result=40 12:36:55 Set A/D channel type result=40 12:36:55 Set A/D encoding result=40 12:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:55 Set channel filter=0.000000e+000 result=40 12:36:55 Config A/D Result=40 12:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:55 Get A/D filter: -9.255963e+061 result=40 12:36:55 Get A/D value=-858993460 result=40 12:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:36:55 Parameters OK 12:36:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:36:55 Set A/D data flow result=40 12:36:55 Set A/D channel type result=40 12:36:55 Set A/D encoding result=40 12:36:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:36:55 Set channel filter=0.000000e+000 result=40 12:36:55 Config A/D Result=40 12:36:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:36:55 Get A/D filter: -9.255963e+061 result=40 12:36:55 Get A/D value=-858993460 result=40 12:36:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:36:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:36:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:36:55 Aux= 12:36:55 Message to Camera, serial 10271 queued 12:36:57 Received message from Master: op=Shutter serial=10275 12:36:57 Shutter LASER close 12:36:58 Received message from Master: op=PointingHead serial=10279 12:36:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:36:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:36:58 Point started: ret=0 12:36:58 point_skyscan result=0 12:36:59 Check angles 12:36:59 SkyScan query 12:36:59 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.205<-21547 Statuses=0009 0009 12:36:59 Msec=0 True Az=135.915 Ze=-143.205 Az status=0009 Ze status=0009 12:37:00 Check angles 12:37:00 SkyScan query 12:37:00 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.235<-20149 Statuses=0009 0009 12:37:00 Msec=750 True Az=153.435 Ze=-122.235 Az status=0009 Ze status=0009 12:37:00 Check angles 12:37:00 SkyScan query 12:37:01 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.86<-18724 Statuses=0009 0009 12:37:01 Msec=1500 True Az=171.255 Ze=-100.86 Az status=0009 Ze status=0009 12:37:01 Check angles 12:37:01 SkyScan query 12:37:02 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.455<-17297 Statuses=0008 0009 12:37:02 Msec=2250 True Az=176.01 Ze=-79.455 Az status=0008 Ze status=0009 12:37:02 Check angles 12:37:02 SkyScan query 12:37:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.47<-15898 Statuses=0008 0009 12:37:03 Msec=3000 True Az=175.995 Ze=-58.47 Az status=0008 Ze status=0009 12:37:03 Check angles 12:37:03 SkyScan query 12:37:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:37:03 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:37:03 Message to Master queued w/err=0: serial=10279 error=0 12:37:08 Received message from Master: op=Filter serial=10280 12:37:08 Color wheel filter change from 0 to 0 12:37:08 FLIGetFilterPos err=0 currentPosition=0 12:37:08 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:08 Filter is already there-color wheel unchanged 12:37:08 Received message from Master: op=Shutter serial=10281 12:37:08 Shutter LASER close 12:37:09 Received message from Camera: op=State serial=10283 12:37:09 GetSingleValue result=40 Value=cccccccc 12:37:09 SkyScan query 12:37:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:37:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:09 Parameters OK 12:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:09 Set A/D data flow result=40 12:37:09 Set A/D channel type result=40 12:37:09 Set A/D encoding result=40 12:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:09 Set channel filter=0.000000e+000 result=40 12:37:09 Config A/D Result=40 12:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:09 Get A/D filter: -9.255963e+061 result=40 12:37:09 Get A/D value=-858993460 result=40 12:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:09 Parameters OK 12:37:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:09 Set A/D data flow result=40 12:37:09 Set A/D channel type result=40 12:37:09 Set A/D encoding result=40 12:37:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:09 Set channel filter=0.000000e+000 result=40 12:37:09 Config A/D Result=40 12:37:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:09 Get A/D filter: -9.255963e+061 result=40 12:37:09 Get A/D value=-858993460 result=40 12:37:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:09 Aux= 12:37:09 Message to Camera, serial 10283 queued 12:37:40 Received message from Master: op=PointingHead serial=10290 12:37:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:37:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:37:40 Point started: ret=0 12:37:40 point_skyscan result=0 12:37:41 Check angles 12:37:41 SkyScan query 12:37:42 SkyScan query done: ret=0 az=152.745<-10183 ze=-21.495<-13433 Statuses=0009 0009 12:37:42 Msec=0 True Az=152.745 Ze=-21.495 Az status=0009 Ze status=0009 12:37:42 Check angles 12:37:42 SkyScan query 12:37:42 SkyScan query done: ret=0 az=134.835<-8989 ze=-0.09<-12006 Statuses=0009 0009 12:37:42 Msec=750 True Az=134.835 Ze=-0.09 Az status=0009 Ze status=0009 12:37:43 Check angles 12:37:43 SkyScan query 12:37:43 SkyScan query done: ret=0 az=117.33<-7822 ze=20.865<-10609 Statuses=0009 0009 12:37:43 Msec=1500 True Az=117.33 Ze=20.865 Az status=0009 Ze status=0009 12:37:43 Check angles 12:37:43 SkyScan query 12:37:44 SkyScan query done: ret=0 az=100.02<-6668 ze=41.805<-9213 Statuses=0009 0009 12:37:44 Msec=2250 True Az=100.02 Ze=41.805 Az status=0009 Ze status=0009 12:37:44 Check angles 12:37:44 SkyScan query 12:37:45 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 12:37:45 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 12:37:45 Check angles 12:37:45 SkyScan query 12:37:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:37:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:37:45 Message to Master queued w/err=0: serial=10290 error=0 12:37:50 Received message from Master: op=Filter serial=10291 12:37:50 Color wheel filter change from 0 to 0 12:37:50 FLIGetFilterPos err=0 currentPosition=0 12:37:50 FLIGetStepsRemaining err=0 RemainingSteps=0 12:37:50 Filter is already there-color wheel unchanged 12:37:51 Received message from Master: op=Shutter serial=10292 12:37:51 Shutter LASER close 12:37:51 Received message from Camera: op=State serial=10294 12:37:51 GetSingleValue result=40 Value=cccccccc 12:37:51 SkyScan query 12:37:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:37:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:51 Parameters OK 12:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:51 Set A/D data flow result=40 12:37:51 Set A/D channel type result=40 12:37:51 Set A/D encoding result=40 12:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:51 Set channel filter=0.000000e+000 result=40 12:37:51 Config A/D Result=40 12:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:51 Get A/D filter: -9.255963e+061 result=40 12:37:51 Get A/D value=-858993460 result=40 12:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:37:51 Parameters OK 12:37:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:37:51 Set A/D data flow result=40 12:37:51 Set A/D channel type result=40 12:37:51 Set A/D encoding result=40 12:37:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:37:51 Set channel filter=0.000000e+000 result=40 12:37:51 Config A/D Result=40 12:37:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:37:51 Get A/D filter: -9.255963e+061 result=40 12:37:51 Get A/D value=-858993460 result=40 12:37:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:37:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:37:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:37:51 Aux= 12:37:51 Message to Camera, serial 10294 queued 12:38:22 Received message from Master: op=PointingHead serial=10301 12:38:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:38:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:38:22 Point started: ret=0 12:38:22 point_skyscan result=0 12:38:23 Check angles 12:38:23 SkyScan query 12:38:24 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 12:38:24 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 12:38:24 Check angles 12:38:24 SkyScan query 12:38:25 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 12:38:25 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 12:38:25 Check angles 12:38:25 SkyScan query 12:38:25 SkyScan query done: ret=0 az=144.255<-9617 ze=38.505<-9433 Statuses=0009 0008 12:38:25 Msec=1500 True Az=144.255 Ze=38.505 Az status=0009 Ze status=0008 12:38:25 Check angles 12:38:25 SkyScan query 12:38:26 SkyScan query done: ret=0 az=161.715<-10781 ze=38.505<-9433 Statuses=0009 0008 12:38:26 Msec=2250 True Az=161.715 Ze=38.505 Az status=0009 Ze status=0008 12:38:26 Check angles 12:38:26 SkyScan query 12:38:27 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:38:27 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:38:27 Check angles 12:38:27 SkyScan query 12:38:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:38:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:38:28 Message to Master queued w/err=0: serial=10301 error=0 12:38:33 Received message from Master: op=Filter serial=10302 12:38:33 Color wheel filter change from 0 to 0 12:38:33 FLIGetFilterPos err=0 currentPosition=0 12:38:33 FLIGetStepsRemaining err=0 RemainingSteps=0 12:38:33 Filter is already there-color wheel unchanged 12:38:33 Received message from Master: op=Shutter serial=10303 12:38:33 Shutter LASER close 12:38:33 Received message from Camera: op=State serial=10305 12:38:33 GetSingleValue result=40 Value=cccccccc 12:38:33 SkyScan query 12:38:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:38:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:33 Parameters OK 12:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:33 Set A/D data flow result=40 12:38:33 Set A/D channel type result=40 12:38:33 Set A/D encoding result=40 12:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:33 Set channel filter=0.000000e+000 result=40 12:38:33 Config A/D Result=40 12:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:33 Get A/D filter: -9.255963e+061 result=40 12:38:33 Get A/D value=-858993460 result=40 12:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:38:33 Parameters OK 12:38:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:38:33 Set A/D data flow result=40 12:38:33 Set A/D channel type result=40 12:38:33 Set A/D encoding result=40 12:38:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:38:33 Set channel filter=0.000000e+000 result=40 12:38:33 Config A/D Result=40 12:38:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:38:33 Get A/D filter: -9.255963e+061 result=40 12:38:33 Get A/D value=-858993460 result=40 12:38:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:38:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:38:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:38:33 Aux= 12:38:33 Message to Camera, serial 10305 queued 12:39:04 Received message from Master: op=PointingHead serial=10312 12:39:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:39:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:39:05 Point started: ret=0 12:39:05 point_skyscan result=0 12:39:05 Check angles 12:39:05 SkyScan query 12:39:06 SkyScan query done: ret=0 az=153.225<-10215 ze=8.925<-11405 Statuses=0009 0009 12:39:06 Msec=0 True Az=153.225 Ze=8.925 Az status=0009 Ze status=0009 12:39:06 Check angles 12:39:06 SkyScan query 12:39:07 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.45<-12830 Statuses=0009 0009 12:39:07 Msec=750 True Az=135.42 Ze=-12.45 Az status=0009 Ze status=0009 12:39:07 Check angles 12:39:07 SkyScan query 12:39:07 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.81<-14254 Statuses=0009 0009 12:39:07 Msec=1500 True Az=117.525 Ze=-33.81 Az status=0009 Ze status=0009 12:39:08 Check angles 12:39:08 SkyScan query 12:39:08 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.54<-15436 Statuses=0009 0009 12:39:08 Msec=2250 True Az=100.14 Ze=-51.54 Az status=0009 Ze status=0009 12:39:08 Check angles 12:39:08 SkyScan query 12:39:09 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:39:09 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:39:09 Check angles 12:39:09 SkyScan query 12:39:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:39:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:39:10 Message to Master queued w/err=0: serial=10312 error=0 12:39:15 Received message from Master: op=Filter serial=10313 12:39:15 Color wheel filter change from 0 to 0 12:39:15 FLIGetFilterPos err=0 currentPosition=0 12:39:15 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:15 Filter is already there-color wheel unchanged 12:39:15 Received message from Master: op=Shutter serial=10314 12:39:15 Shutter LASER close 12:39:15 Received message from Camera: op=State serial=10316 12:39:15 GetSingleValue result=40 Value=cccccccc 12:39:15 SkyScan query 12:39:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:39:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:15 Parameters OK 12:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:15 Set A/D data flow result=40 12:39:15 Set A/D channel type result=40 12:39:15 Set A/D encoding result=40 12:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:15 Set channel filter=0.000000e+000 result=40 12:39:15 Config A/D Result=40 12:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:15 Get A/D filter: -9.255963e+061 result=40 12:39:15 Get A/D value=-858993460 result=40 12:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:15 Parameters OK 12:39:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:15 Set A/D data flow result=40 12:39:15 Set A/D channel type result=40 12:39:15 Set A/D encoding result=40 12:39:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:15 Set channel filter=0.000000e+000 result=40 12:39:15 Config A/D Result=40 12:39:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:15 Get A/D filter: -9.255963e+061 result=40 12:39:15 Get A/D value=-858993460 result=40 12:39:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:15 Aux= 12:39:15 Message to Camera, serial 10316 queued 12:39:46 Received message from Master: op=PointingHead serial=10323 12:39:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:39:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:39:47 Point started: ret=0 12:39:47 point_skyscan result=0 12:39:47 Check angles 12:39:47 SkyScan query 12:39:48 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.84<-17456 Statuses=0009 0009 12:39:48 Msec=0 True Az=109.425 Ze=-81.84 Az status=0009 Ze status=0009 12:39:48 Check angles 12:39:48 SkyScan query 12:39:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 12:39:49 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 12:39:49 Check angles 12:39:49 SkyScan query 12:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 12:39:50 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 12:39:50 Check angles 12:39:50 SkyScan query 12:39:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 12:39:50 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 12:39:50 Check angles 12:39:50 SkyScan query 12:39:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 12:39:51 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 12:39:51 Check angles 12:39:51 SkyScan query 12:39:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-173.025<-23535 Statuses=0008 0008 12:39:52 Msec=3750 True Az=113.01 Ze=-173.025 Az status=0008 Ze status=0008 12:39:52 Message to Master queued w/err=0: serial=10323 error=0 12:39:57 Received message from Master: op=Filter serial=10324 12:39:57 Color wheel filter change from 0 to 0 12:39:57 FLIGetFilterPos err=0 currentPosition=0 12:39:57 FLIGetStepsRemaining err=0 RemainingSteps=0 12:39:57 Filter is already there-color wheel unchanged 12:39:57 Received message from Master: op=Shutter serial=10325 12:39:57 Shutter LASER open 12:39:57 Received message from Camera: op=State serial=10327 12:39:57 GetSingleValue result=40 Value=cccccccc 12:39:57 SkyScan query 12:39:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:39:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:58 Parameters OK 12:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:58 Set A/D data flow result=40 12:39:58 Set A/D channel type result=40 12:39:58 Set A/D encoding result=40 12:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:58 Set channel filter=0.000000e+000 result=40 12:39:58 Config A/D Result=40 12:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:58 Get A/D filter: -9.255963e+061 result=40 12:39:58 Get A/D value=-858993460 result=40 12:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:39:58 Parameters OK 12:39:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:39:58 Set A/D data flow result=40 12:39:58 Set A/D channel type result=40 12:39:58 Set A/D encoding result=40 12:39:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:39:58 Set channel filter=0.000000e+000 result=40 12:39:58 Config A/D Result=40 12:39:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:39:58 Get A/D filter: -9.255963e+061 result=40 12:39:58 Get A/D value=-858993460 result=40 12:39:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:39:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:39:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:39:58 Aux= 12:39:58 Message to Camera, serial 10327 queued 12:40:00 Received message from Master: op=Shutter serial=10331 12:40:00 Shutter LASER close 12:40:01 Received message from Master: op=PointingHead serial=10335 12:40:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:40:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:40:01 Point started: ret=0 12:40:01 point_skyscan result=0 12:40:02 Check angles 12:40:02 SkyScan query 12:40:02 SkyScan query done: ret=0 az=90.135<-6009 ze=157.44<-1504 Statuses=0009 0009 12:40:02 Msec=0 True Az=90.135 Ze=157.44 Az status=0009 Ze status=0009 12:40:02 Check angles 12:40:02 SkyScan query 12:40:03 SkyScan query done: ret=0 az=72.315<-4821 ze=136.035<-2931 Statuses=0009 0009 12:40:03 Msec=750 True Az=72.315 Ze=136.035 Az status=0009 Ze status=0009 12:40:03 Check angles 12:40:03 SkyScan query 12:40:04 SkyScan query done: ret=0 az=54.81<-3654 ze=115.11<-4326 Statuses=0009 0009 12:40:04 Msec=1500 True Az=54.81 Ze=115.11 Az status=0009 Ze status=0009 12:40:04 Check angles 12:40:04 SkyScan query 12:40:05 SkyScan query done: ret=0 az=40.83<-2722 ze=94.125<-5725 Statuses=0009 0009 12:40:05 Msec=2250 True Az=40.83 Ze=94.125 Az status=0009 Ze status=0009 12:40:05 Check angles 12:40:05 SkyScan query 12:40:05 SkyScan query done: ret=0 az=40.995<-2733 ze=72.72<-7152 Statuses=0008 0009 12:40:05 Msec=3000 True Az=40.995 Ze=72.72 Az status=0008 Ze status=0009 12:40:05 Check angles 12:40:05 SkyScan query 12:40:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 12:40:06 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 12:40:06 Check angles 12:40:06 SkyScan query 12:40:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:40:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:40:07 Message to Master queued w/err=0: serial=10335 error=0 12:40:12 Received message from Master: op=Filter serial=10336 12:40:12 Color wheel filter change from 0 to 0 12:40:12 FLIGetFilterPos err=0 currentPosition=0 12:40:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:12 Filter is already there-color wheel unchanged 12:40:12 Received message from Master: op=Shutter serial=10337 12:40:12 Shutter LASER close 12:40:12 Received message from Camera: op=State serial=10339 12:40:12 GetSingleValue result=40 Value=cccccccc 12:40:12 SkyScan query 12:40:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:40:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:13 Parameters OK 12:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:13 Set A/D data flow result=40 12:40:13 Set A/D channel type result=40 12:40:13 Set A/D encoding result=40 12:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:13 Set channel filter=0.000000e+000 result=40 12:40:13 Config A/D Result=40 12:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:13 Get A/D filter: -9.255963e+061 result=40 12:40:13 Get A/D value=-858993460 result=40 12:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:13 Parameters OK 12:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:13 Set A/D data flow result=40 12:40:13 Set A/D channel type result=40 12:40:13 Set A/D encoding result=40 12:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:13 Set channel filter=0.000000e+000 result=40 12:40:13 Config A/D Result=40 12:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:13 Get A/D filter: -9.255963e+061 result=40 12:40:13 Get A/D value=-858993460 result=40 12:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:13 Aux= [UTC 2018-12-4 12:40:13] 12:40:13 Message to Camera, serial 10339 queued 12:40:44 Received message from Master: op=PointingHead serial=10346 12:40:44 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:40:44 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:40:44 Point started: ret=0 12:40:44 point_skyscan result=0 12:40:45 Check angles 12:40:45 SkyScan query 12:40:45 SkyScan query done: ret=0 az=63.795<-4253 ze=66.54<-7564 Statuses=0009 0008 12:40:45 Msec=0 True Az=63.795 Ze=66.54 Az status=0009 Ze status=0008 12:40:45 Check angles 12:40:45 SkyScan query 12:40:46 SkyScan query done: ret=0 az=81.15<-5410 ze=66.51<-7566 Statuses=0009 0008 12:40:46 Msec=750 True Az=81.15 Ze=66.51 Az status=0009 Ze status=0008 12:40:46 Check angles 12:40:46 SkyScan query 12:40:47 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 12:40:47 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 12:40:47 Check angles 12:40:47 SkyScan query 12:40:47 SkyScan query done: ret=0 az=116.67<-7778 ze=66.495<-7567 Statuses=0009 0008 12:40:47 Msec=2250 True Az=116.67 Ze=66.495 Az status=0009 Ze status=0008 12:40:48 Check angles 12:40:48 SkyScan query 12:40:48 SkyScan query done: ret=0 az=134.235<-8949 ze=66.495<-7567 Statuses=0009 0008 12:40:48 Msec=3000 True Az=134.235 Ze=66.495 Az status=0009 Ze status=0008 12:40:48 Check angles 12:40:48 SkyScan query 12:40:49 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 12:40:49 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 12:40:49 Check angles 12:40:49 SkyScan query 12:40:50 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:40:50 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:40:50 Message to Master queued w/err=0: serial=10346 error=0 12:40:55 Received message from Master: op=Filter serial=10347 12:40:55 Color wheel filter change from 0 to 0 12:40:55 FLIGetFilterPos err=0 currentPosition=0 12:40:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:40:55 Filter is already there-color wheel unchanged 12:40:55 Received message from Master: op=Shutter serial=10348 12:40:55 Shutter LASER close 12:40:55 Received message from Camera: op=State serial=10350 12:40:55 GetSingleValue result=40 Value=cccccccc 12:40:55 SkyScan query 12:40:56 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:40:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:56 Parameters OK 12:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:56 Set A/D data flow result=40 12:40:56 Set A/D channel type result=40 12:40:56 Set A/D encoding result=40 12:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:56 Set channel filter=0.000000e+000 result=40 12:40:56 Config A/D Result=40 12:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:56 Get A/D filter: -9.255963e+061 result=40 12:40:56 Get A/D value=-858993460 result=40 12:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:40:56 Parameters OK 12:40:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:40:56 Set A/D data flow result=40 12:40:56 Set A/D channel type result=40 12:40:56 Set A/D encoding result=40 12:40:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:40:56 Set channel filter=0.000000e+000 result=40 12:40:56 Config A/D Result=40 12:40:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:40:56 Get A/D filter: -9.255963e+061 result=40 12:40:56 Get A/D value=-858993460 result=40 12:40:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:40:56 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:40:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:40:56 Aux= 12:40:56 Message to Camera, serial 10350 queued 12:41:26 Received message from Master: op=PointingHead serial=10357 12:41:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:41:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:41:27 Point started: ret=0 12:41:27 point_skyscan result=0 12:41:28 Check angles 12:41:28 SkyScan query 12:41:28 SkyScan query done: ret=0 az=134.64<-8976 ze=36.285<-9581 Statuses=0009 0009 12:41:28 Msec=0 True Az=134.64 Ze=36.285 Az status=0009 Ze status=0009 12:41:28 Check angles 12:41:28 SkyScan query 12:41:29 SkyScan query done: ret=0 az=117.12<-7808 ze=15.345<-10977 Statuses=0009 0009 12:41:29 Msec=750 True Az=117.12 Ze=15.345 Az status=0009 Ze status=0009 12:41:29 Check angles 12:41:29 SkyScan query 12:41:30 SkyScan query done: ret=0 az=99.75<-6650 ze=-5.625<-12375 Statuses=0009 0009 12:41:30 Msec=1500 True Az=99.75 Ze=-5.625 Az status=0009 Ze status=0009 12:41:30 Check angles 12:41:30 SkyScan query 12:41:30 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.64<-13776 Statuses=0009 0009 12:41:30 Msec=2250 True Az=82.275 Ze=-26.64 Az status=0009 Ze status=0009 12:41:31 Check angles 12:41:31 SkyScan query 12:41:31 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 12:41:31 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 12:41:31 Check angles 12:41:31 SkyScan query 12:41:32 SkyScan query done: ret=0 az=46.89<-3126 ze=-38.52<-14568 Statuses=0009 0008 12:41:32 Msec=3750 True Az=46.89 Ze=-38.52 Az status=0009 Ze status=0008 12:41:32 Check angles 12:41:32 SkyScan query 12:41:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:41:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:41:33 Message to Master queued w/err=0: serial=10357 error=0 12:41:38 Received message from Master: op=Filter serial=10358 12:41:38 Color wheel filter change from 0 to 0 12:41:38 FLIGetFilterPos err=0 currentPosition=0 12:41:38 FLIGetStepsRemaining err=0 RemainingSteps=0 12:41:38 Filter is already there-color wheel unchanged 12:41:38 Received message from Master: op=Shutter serial=10359 12:41:38 Shutter LASER close 12:41:38 Received message from Camera: op=State serial=10361 12:41:38 GetSingleValue result=40 Value=cccccccc 12:41:38 SkyScan query 12:41:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:41:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:38 Parameters OK 12:41:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:38 Set A/D data flow result=40 12:41:38 Set A/D channel type result=40 12:41:38 Set A/D encoding result=40 12:41:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:38 Set channel filter=0.000000e+000 result=40 12:41:38 Config A/D Result=40 12:41:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:38 Get A/D filter: -9.255963e+061 result=40 12:41:38 Get A/D value=-858993460 result=40 12:41:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:41:38 Parameters OK 12:41:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:41:38 Set A/D data flow result=40 12:41:38 Set A/D channel type result=40 12:41:38 Set A/D encoding result=40 12:41:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:41:38 Set channel filter=0.000000e+000 result=40 12:41:38 Config A/D Result=40 12:41:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:41:38 Get A/D filter: -9.255963e+061 result=40 12:41:38 Get A/D value=-858993460 result=40 12:41:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:41:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:41:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:41:38 Aux= 12:41:38 Message to Camera, serial 10361 queued 12:42:09 Received message from Master: op=PointingHead serial=10368 12:42:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:42:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:42:10 Point started: ret=0 12:42:10 point_skyscan result=0 12:42:10 Check angles 12:42:10 SkyScan query 12:42:11 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.28<-16552 Statuses=0009 0009 12:42:11 Msec=0 True Az=63.855 Ze=-68.28 Az status=0009 Ze status=0009 12:42:11 Check angles 12:42:11 SkyScan query 12:42:12 SkyScan query done: ret=0 az=81.48<-5432 ze=-89.235<-17949 Statuses=0009 0009 12:42:12 Msec=750 True Az=81.48 Ze=-89.235 Az status=0009 Ze status=0009 12:42:12 Check angles 12:42:12 SkyScan query 12:42:12 SkyScan query done: ret=0 az=98.985<-6599 ze=-110.175<-19345 Statuses=0009 0009 12:42:12 Msec=1500 True Az=98.985 Ze=-110.175 Az status=0009 Ze status=0009 12:42:13 Check angles 12:42:13 SkyScan query 12:42:13 SkyScan query done: ret=0 az=116.355<-7757 ze=-131.13<-20742 Statuses=0009 0009 12:42:13 Msec=2250 True Az=116.355 Ze=-131.13 Az status=0009 Ze status=0009 12:42:13 Check angles 12:42:13 SkyScan query 12:42:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0009 0008 12:42:14 Msec=3000 True Az=131.01 Ze=-141.525 Az status=0009 Ze status=0008 12:42:14 Check angles 12:42:14 SkyScan query 12:42:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:42:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:42:15 Message to Master queued w/err=0: serial=10368 error=0 12:42:20 Received message from Master: op=Filter serial=10369 12:42:20 Color wheel filter change from 0 to 0 12:42:20 FLIGetFilterPos err=0 currentPosition=0 12:42:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:20 Filter is already there-color wheel unchanged 12:42:20 Received message from Master: op=Shutter serial=10370 12:42:20 Shutter LASER close 12:42:20 Received message from Camera: op=State serial=10372 12:42:20 GetSingleValue result=40 Value=cccccccc 12:42:20 SkyScan query 12:42:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:42:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:20 Parameters OK 12:42:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:20 Set A/D data flow result=40 12:42:20 Set A/D channel type result=40 12:42:20 Set A/D encoding result=40 12:42:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:20 Set channel filter=0.000000e+000 result=40 12:42:20 Config A/D Result=40 12:42:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:20 Get A/D filter: -9.255963e+061 result=40 12:42:20 Get A/D value=-858993460 result=40 12:42:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:42:20 Parameters OK 12:42:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:42:20 Set A/D data flow result=40 12:42:20 Set A/D channel type result=40 12:42:20 Set A/D encoding result=40 12:42:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:42:20 Set channel filter=0.000000e+000 result=40 12:42:20 Config A/D Result=40 12:42:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:42:20 Get A/D filter: -9.255963e+061 result=40 12:42:20 Get A/D value=-858993460 result=40 12:42:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:42:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:42:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:42:20 Aux= 12:42:20 Message to Camera, serial 10372 queued 12:42:51 Received message from Master: op=PointingHead serial=10379 12:42:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:42:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:42:52 Point started: ret=0 12:42:52 point_skyscan result=0 12:42:52 Check angles 12:42:52 SkyScan query 12:42:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 12:42:53 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 12:42:53 Check angles 12:42:53 SkyScan query 12:42:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:42:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:42:54 Message to Master queued w/err=0: serial=10379 error=0 12:42:59 Received message from Master: op=Filter serial=10380 12:42:59 Color wheel filter change from 0 to 0 12:42:59 FLIGetFilterPos err=0 currentPosition=0 12:42:59 FLIGetStepsRemaining err=0 RemainingSteps=0 12:42:59 Filter is already there-color wheel unchanged 12:42:59 Received message from Master: op=Shutter serial=10381 12:42:59 Shutter LASER open 12:42:59 Received message from Camera: op=State serial=10383 12:42:59 GetSingleValue result=40 Value=cccccccc 12:42:59 SkyScan query 12:43:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:43:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:00 Parameters OK 12:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:00 Set A/D data flow result=40 12:43:00 Set A/D channel type result=40 12:43:00 Set A/D encoding result=40 12:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:00 Set channel filter=0.000000e+000 result=40 12:43:00 Config A/D Result=40 12:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:00 Get A/D filter: -9.255963e+061 result=40 12:43:00 Get A/D value=-858993460 result=40 12:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:00 Parameters OK 12:43:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:00 Set A/D data flow result=40 12:43:00 Set A/D channel type result=40 12:43:00 Set A/D encoding result=40 12:43:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:00 Set channel filter=0.000000e+000 result=40 12:43:00 Config A/D Result=40 12:43:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:00 Get A/D filter: -9.255963e+061 result=40 12:43:00 Get A/D value=-858993460 result=40 12:43:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:00 Aux= 12:43:00 Message to Camera, serial 10383 queued 12:43:02 Received message from Master: op=Shutter serial=10387 12:43:02 Shutter LASER close 12:43:03 Received message from Master: op=PointingHead serial=10391 12:43:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:43:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:43:03 Point started: ret=0 12:43:03 point_skyscan result=0 12:43:04 Check angles 12:43:04 SkyScan query 12:43:04 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.95<-21530 Statuses=0009 0009 12:43:04 Msec=0 True Az=136.155 Ze=-142.95 Az status=0009 Ze status=0009 12:43:05 Check angles 12:43:05 SkyScan query 12:43:05 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.56<-20104 Statuses=0009 0009 12:43:05 Msec=750 True Az=154.095 Ze=-121.56 Az status=0009 Ze status=0009 12:43:05 Check angles 12:43:05 SkyScan query 12:43:06 SkyScan query done: ret=0 az=171.495<-11433 ze=-100.56<-18704 Statuses=0009 0009 12:43:06 Msec=1500 True Az=171.495 Ze=-100.56 Az status=0009 Ze status=0009 12:43:06 Check angles 12:43:06 SkyScan query 12:43:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.635<-17309 Statuses=0008 0009 12:43:07 Msec=2250 True Az=176.025 Ze=-79.635 Az status=0008 Ze status=0009 12:43:07 Check angles 12:43:07 SkyScan query 12:43:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.665<-15911 Statuses=0008 0009 12:43:07 Msec=3000 True Az=175.995 Ze=-58.665 Az status=0008 Ze status=0009 12:43:08 Check angles 12:43:08 SkyScan query 12:43:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:43:08 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:43:08 Message to Master queued w/err=0: serial=10391 error=0 12:43:13 Received message from Master: op=Filter serial=10392 12:43:13 Color wheel filter change from 0 to 0 12:43:13 FLIGetFilterPos err=0 currentPosition=0 12:43:13 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:13 Filter is already there-color wheel unchanged 12:43:13 Received message from Master: op=Shutter serial=10393 12:43:13 Shutter LASER close 12:43:13 Received message from Camera: op=State serial=10395 12:43:13 GetSingleValue result=40 Value=cccccccc 12:43:13 SkyScan query 12:43:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:43:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:14 Parameters OK 12:43:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:14 Set A/D data flow result=40 12:43:14 Set A/D channel type result=40 12:43:14 Set A/D encoding result=40 12:43:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:14 Set channel filter=0.000000e+000 result=40 12:43:14 Config A/D Result=40 12:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:14 Get A/D filter: -9.255963e+061 result=40 12:43:14 Get A/D value=-858993460 result=40 12:43:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:14 Parameters OK 12:43:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:14 Set A/D data flow result=40 12:43:14 Set A/D channel type result=40 12:43:14 Set A/D encoding result=40 12:43:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:14 Set channel filter=0.000000e+000 result=40 12:43:14 Config A/D Result=40 12:43:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:14 Get A/D filter: -9.255963e+061 result=40 12:43:14 Get A/D value=-858993460 result=40 12:43:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:14 Aux= 12:43:14 Message to Camera, serial 10395 queued 12:43:45 Received message from Master: op=PointingHead serial=10402 12:43:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:43:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:43:45 Point started: ret=0 12:43:45 point_skyscan result=0 12:43:46 Check angles 12:43:46 SkyScan query 12:43:47 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.615<-13441 Statuses=0009 0009 12:43:47 Msec=0 True Az=152.79 Ze=-21.615 Az status=0009 Ze status=0009 12:43:47 Check angles 12:43:47 SkyScan query 12:43:47 SkyScan query done: ret=0 az=134.97<-8998 ze=-0.225<-12015 Statuses=0009 0009 12:43:47 Msec=750 True Az=134.97 Ze=-0.225 Az status=0009 Ze status=0009 12:43:48 Check angles 12:43:48 SkyScan query 12:43:48 SkyScan query done: ret=0 az=117.105<-7807 ze=21.165<-10589 Statuses=0009 0009 12:43:48 Msec=1500 True Az=117.105 Ze=21.165 Az status=0009 Ze status=0009 12:43:48 Check angles 12:43:48 SkyScan query 12:43:49 SkyScan query done: ret=0 az=99.675<-6645 ze=42.135<-9191 Statuses=0009 0009 12:43:49 Msec=2250 True Az=99.675 Ze=42.135 Az status=0009 Ze status=0009 12:43:49 Check angles 12:43:49 SkyScan query 12:43:50 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:43:50 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:43:50 Check angles 12:43:50 SkyScan query 12:43:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:43:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:43:50 Message to Master queued w/err=0: serial=10402 error=0 12:43:55 Received message from Master: op=Filter serial=10403 12:43:55 Color wheel filter change from 0 to 0 12:43:55 FLIGetFilterPos err=0 currentPosition=0 12:43:55 FLIGetStepsRemaining err=0 RemainingSteps=0 12:43:55 Filter is already there-color wheel unchanged 12:43:56 Received message from Master: op=Shutter serial=10404 12:43:56 Shutter LASER close 12:43:56 Received message from Camera: op=State serial=10406 12:43:56 GetSingleValue result=40 Value=cccccccc 12:43:56 SkyScan query 12:43:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:43:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:56 Parameters OK 12:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:56 Set A/D data flow result=40 12:43:56 Set A/D channel type result=40 12:43:56 Set A/D encoding result=40 12:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:56 Set channel filter=0.000000e+000 result=40 12:43:56 Config A/D Result=40 12:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:56 Get A/D filter: -9.255963e+061 result=40 12:43:56 Get A/D value=-858993460 result=40 12:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:43:56 Parameters OK 12:43:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:43:56 Set A/D data flow result=40 12:43:56 Set A/D channel type result=40 12:43:56 Set A/D encoding result=40 12:43:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:43:56 Set channel filter=0.000000e+000 result=40 12:43:56 Config A/D Result=40 12:43:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:43:56 Get A/D filter: -9.255963e+061 result=40 12:43:56 Get A/D value=-858993460 result=40 12:43:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:43:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:43:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:43:56 Aux= 12:43:56 Message to Camera, serial 10406 queued 12:44:27 Received message from Master: op=PointingHead serial=10413 12:44:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:44:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:44:27 Point started: ret=0 12:44:27 point_skyscan result=0 12:44:28 Check angles 12:44:28 SkyScan query 12:44:29 SkyScan query done: ret=0 az=109.275<-7285 ze=38.49<-9434 Statuses=0009 0008 12:44:29 Msec=0 True Az=109.275 Ze=38.49 Az status=0009 Ze status=0008 12:44:29 Check angles 12:44:29 SkyScan query 12:44:29 SkyScan query done: ret=0 az=126.72<-8448 ze=38.505<-9433 Statuses=0009 0008 12:44:29 Msec=750 True Az=126.72 Ze=38.505 Az status=0009 Ze status=0008 12:44:30 Check angles 12:44:30 SkyScan query 12:44:30 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 12:44:30 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 12:44:30 Check angles 12:44:30 SkyScan query 12:44:31 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 12:44:31 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 12:44:31 Check angles 12:44:31 SkyScan query 12:44:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 12:44:32 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 12:44:32 Check angles 12:44:32 SkyScan query 12:44:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:44:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:44:32 Message to Master queued w/err=0: serial=10413 error=0 12:44:37 Received message from Master: op=Filter serial=10414 12:44:37 Color wheel filter change from 0 to 0 12:44:37 FLIGetFilterPos err=0 currentPosition=0 12:44:37 FLIGetStepsRemaining err=0 RemainingSteps=0 12:44:37 Filter is already there-color wheel unchanged 12:44:38 Received message from Master: op=Shutter serial=10415 12:44:38 Shutter LASER close 12:44:38 Received message from Camera: op=State serial=10417 12:44:38 GetSingleValue result=40 Value=cccccccc 12:44:38 SkyScan query 12:44:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:44:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:38 Parameters OK 12:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:38 Set A/D data flow result=40 12:44:38 Set A/D channel type result=40 12:44:38 Set A/D encoding result=40 12:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:38 Set channel filter=0.000000e+000 result=40 12:44:38 Config A/D Result=40 12:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:38 Get A/D filter: -9.255963e+061 result=40 12:44:38 Get A/D value=-858993460 result=40 12:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:44:38 Parameters OK 12:44:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:44:38 Set A/D data flow result=40 12:44:38 Set A/D channel type result=40 12:44:38 Set A/D encoding result=40 12:44:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:44:38 Set channel filter=0.000000e+000 result=40 12:44:38 Config A/D Result=40 12:44:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:44:38 Get A/D filter: -9.255963e+061 result=40 12:44:38 Get A/D value=-858993460 result=40 12:44:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:44:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:44:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:44:38 Aux= 12:44:38 Message to Camera, serial 10417 queued 12:45:09 Received message from Master: op=PointingHead serial=10424 12:45:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:45:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:45:09 Point started: ret=0 12:45:09 point_skyscan result=0 12:45:10 Check angles 12:45:10 SkyScan query 12:45:11 SkyScan query done: ret=0 az=152.97<-10198 ze=8.76<-11416 Statuses=0009 0009 12:45:11 Msec=0 True Az=152.97 Ze=8.76 Az status=0009 Ze status=0009 12:45:11 Check angles 12:45:11 SkyScan query 12:45:12 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.165<-12811 Statuses=0009 0009 12:45:12 Msec=750 True Az=135.585 Ze=-12.165 Az status=0009 Ze status=0009 12:45:12 Check angles 12:45:12 SkyScan query 12:45:12 SkyScan query done: ret=0 az=118.095<-7873 ze=-33.135<-14209 Statuses=0009 0009 12:45:12 Msec=1500 True Az=118.095 Ze=-33.135 Az status=0009 Ze status=0009 12:45:12 Check angles 12:45:12 SkyScan query 12:45:13 SkyScan query done: ret=0 az=100.35<-6690 ze=-51.54<-15436 Statuses=0009 0009 12:45:13 Msec=2250 True Az=100.35 Ze=-51.54 Az status=0009 Ze status=0009 12:45:13 Check angles 12:45:13 SkyScan query 12:45:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:45:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:45:14 Check angles 12:45:14 SkyScan query 12:45:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:45:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:45:15 Message to Master queued w/err=0: serial=10424 error=0 12:45:20 Received message from Master: op=Filter serial=10425 12:45:20 Color wheel filter change from 0 to 0 12:45:20 FLIGetFilterPos err=0 currentPosition=0 12:45:20 FLIGetStepsRemaining err=0 RemainingSteps=0 12:45:20 Filter is already there-color wheel unchanged 12:45:20 Received message from Master: op=Shutter serial=10426 12:45:20 Shutter LASER close 12:45:20 Received message from Camera: op=State serial=10428 12:45:20 GetSingleValue result=40 Value=cccccccc 12:45:20 SkyScan query 12:45:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:45:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:20 Parameters OK 12:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:20 Set A/D data flow result=40 12:45:20 Set A/D channel type result=40 12:45:20 Set A/D encoding result=40 12:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:20 Set channel filter=0.000000e+000 result=40 12:45:20 Config A/D Result=40 12:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:20 Get A/D filter: -9.255963e+061 result=40 12:45:20 Get A/D value=-858993460 result=40 12:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:45:20 Parameters OK 12:45:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:45:20 Set A/D data flow result=40 12:45:20 Set A/D channel type result=40 12:45:20 Set A/D encoding result=40 12:45:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:45:20 Set channel filter=0.000000e+000 result=40 12:45:20 Config A/D Result=40 12:45:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:45:20 Get A/D filter: -9.255963e+061 result=40 12:45:20 Get A/D value=-858993460 result=40 12:45:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:45:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:45:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:45:20 Aux= 12:45:20 Message to Camera, serial 10428 queued 12:45:51 Received message from Master: op=PointingHead serial=10435 12:45:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:45:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:45:52 Point started: ret=0 12:45:52 point_skyscan result=0 12:45:52 Check angles 12:45:52 SkyScan query 12:45:53 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.69<-17446 Statuses=0009 0009 12:45:53 Msec=0 True Az=109.365 Ze=-81.69 Az status=0009 Ze status=0009 12:45:53 Check angles 12:45:53 SkyScan query 12:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.645<-18843 Statuses=0008 0009 12:45:54 Msec=750 True Az=112.995 Ze=-102.645 Az status=0008 Ze status=0009 12:45:54 Check angles 12:45:54 SkyScan query 12:45:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 12:45:54 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 12:45:55 Check angles 12:45:55 SkyScan query 12:45:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 12:45:55 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 12:45:55 Check angles 12:45:55 SkyScan query 12:45:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 12:45:56 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 12:45:56 Check angles 12:45:56 SkyScan query 12:45:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:45:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:45:57 Message to Master queued w/err=0: serial=10435 error=0 12:46:02 Received message from Master: op=Filter serial=10436 12:46:02 Color wheel filter change from 0 to 0 12:46:02 FLIGetFilterPos err=0 currentPosition=0 12:46:02 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:02 Filter is already there-color wheel unchanged 12:46:02 Received message from Master: op=Shutter serial=10437 12:46:02 Shutter LASER open 12:46:02 Received message from Camera: op=State serial=10439 12:46:02 GetSingleValue result=40 Value=cccccccc 12:46:02 SkyScan query 12:46:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:46:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:03 Parameters OK 12:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:03 Set A/D data flow result=40 12:46:03 Set A/D channel type result=40 12:46:03 Set A/D encoding result=40 12:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:03 Set channel filter=0.000000e+000 result=40 12:46:03 Config A/D Result=40 12:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:03 Get A/D filter: -9.255963e+061 result=40 12:46:03 Get A/D value=-858993460 result=40 12:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:03 Parameters OK 12:46:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:03 Set A/D data flow result=40 12:46:03 Set A/D channel type result=40 12:46:03 Set A/D encoding result=40 12:46:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:03 Set channel filter=0.000000e+000 result=40 12:46:03 Config A/D Result=40 12:46:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:03 Get A/D filter: -9.255963e+061 result=40 12:46:03 Get A/D value=-858993460 result=40 12:46:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:03 Aux= 12:46:03 Message to Camera, serial 10439 queued 12:46:05 Received message from Master: op=Shutter serial=10443 12:46:05 Shutter LASER close 12:46:05 Received message from Master: op=PointingHead serial=10447 12:46:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:46:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:46:06 Point started: ret=0 12:46:06 point_skyscan result=0 12:46:07 Check angles 12:46:07 SkyScan query 12:46:07 SkyScan query done: ret=0 az=89.91<-5994 ze=157.365<-1509 Statuses=0009 0009 12:46:07 Msec=0 True Az=89.91 Ze=157.365 Az status=0009 Ze status=0009 12:46:07 Check angles 12:46:07 SkyScan query 12:46:08 SkyScan query done: ret=0 az=72.135<-4809 ze=135.975<-2935 Statuses=0009 0009 12:46:08 Msec=750 True Az=72.135 Ze=135.975 Az status=0009 Ze status=0009 12:46:08 Check angles 12:46:08 SkyScan query 12:46:09 SkyScan query done: ret=0 az=54.795<-3653 ze=115.035<-4331 Statuses=0009 0009 12:46:09 Msec=1500 True Az=54.795 Ze=115.035 Az status=0009 Ze status=0009 12:46:09 Check angles 12:46:09 SkyScan query 12:46:09 SkyScan query done: ret=0 az=40.845<-2723 ze=94.065<-5729 Statuses=0009 0009 12:46:09 Msec=2250 True Az=40.845 Ze=94.065 Az status=0009 Ze status=0009 12:46:10 Check angles 12:46:10 SkyScan query 12:46:10 SkyScan query done: ret=0 az=41.01<-2734 ze=73.125<-7125 Statuses=0008 0009 12:46:10 Msec=3000 True Az=41.01 Ze=73.125 Az status=0008 Ze status=0009 12:46:10 Check angles 12:46:10 SkyScan query 12:46:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 12:46:11 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 12:46:11 Check angles 12:46:11 SkyScan query 12:46:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:46:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:46:12 Message to Master queued w/err=0: serial=10447 error=0 12:46:17 Received message from Master: op=Filter serial=10448 12:46:17 Color wheel filter change from 0 to 0 12:46:17 FLIGetFilterPos err=0 currentPosition=0 12:46:17 FLIGetStepsRemaining err=0 RemainingSteps=0 12:46:17 Filter is already there-color wheel unchanged 12:46:17 Received message from Master: op=Shutter serial=10449 12:46:17 Shutter LASER close 12:46:17 Received message from Camera: op=State serial=10451 12:46:17 GetSingleValue result=40 Value=cccccccc 12:46:17 SkyScan query 12:46:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:46:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:18 Parameters OK 12:46:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:18 Set A/D data flow result=40 12:46:18 Set A/D channel type result=40 12:46:18 Set A/D encoding result=40 12:46:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:18 Set channel filter=0.000000e+000 result=40 12:46:18 Config A/D Result=40 12:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:18 Get A/D filter: -9.255963e+061 result=40 12:46:18 Get A/D value=-858993460 result=40 12:46:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:46:18 Parameters OK 12:46:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:46:18 Set A/D data flow result=40 12:46:18 Set A/D channel type result=40 12:46:18 Set A/D encoding result=40 12:46:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:46:18 Set channel filter=0.000000e+000 result=40 12:46:18 Config A/D Result=40 12:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:46:18 Get A/D filter: -9.255963e+061 result=40 12:46:18 Get A/D value=-858993460 result=40 12:46:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:46:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:46:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:46:18 Aux= 12:46:18 Message to Camera, serial 10451 queued 12:46:49 Received message from Master: op=PointingHead serial=10458 12:46:49 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:46:49 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:46:49 Point started: ret=0 12:46:49 point_skyscan result=0 12:46:50 Check angles 12:46:50 SkyScan query 12:46:50 SkyScan query done: ret=0 az=63.99<-4266 ze=66.555<-7563 Statuses=0009 0008 12:46:50 Msec=0 True Az=63.99 Ze=66.555 Az status=0009 Ze status=0008 12:46:50 Check angles 12:46:50 SkyScan query 12:46:51 SkyScan query done: ret=0 az=81.615<-5441 ze=66.495<-7567 Statuses=0009 0008 12:46:51 Msec=750 True Az=81.615 Ze=66.495 Az status=0009 Ze status=0008 12:46:51 Check angles 12:46:51 SkyScan query 12:46:52 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 12:46:52 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 12:46:52 Check angles 12:46:52 SkyScan query 12:46:52 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 12:46:52 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 12:46:53 Check angles 12:46:53 SkyScan query 12:46:53 SkyScan query done: ret=0 az=133.965<-8931 ze=66.495<-7567 Statuses=0009 0008 12:46:53 Msec=3000 True Az=133.965 Ze=66.495 Az status=0009 Ze status=0008 12:46:53 Check angles 12:46:53 SkyScan query 12:46:54 SkyScan query done: ret=0 az=151.38<-10092 ze=66.495<-7567 Statuses=0009 0008 12:46:54 Msec=3750 True Az=151.38 Ze=66.495 Az status=0009 Ze status=0008 12:46:54 Check angles 12:46:54 SkyScan query 12:46:55 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 12:46:55 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 12:46:55 Message to Master queued w/err=0: serial=10458 error=0 12:47:00 Received message from Master: op=Filter serial=10459 12:47:00 Color wheel filter change from 0 to 0 12:47:00 FLIGetFilterPos err=0 currentPosition=0 12:47:00 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:00 Filter is already there-color wheel unchanged 12:47:00 Received message from Master: op=Shutter serial=10460 12:47:00 Shutter LASER close 12:47:00 Received message from Camera: op=State serial=10462 12:47:00 GetSingleValue result=40 Value=cccccccc 12:47:00 SkyScan query 12:47:01 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:47:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:01 Parameters OK 12:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:01 Set A/D data flow result=40 12:47:01 Set A/D channel type result=40 12:47:01 Set A/D encoding result=40 12:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:01 Set channel filter=0.000000e+000 result=40 12:47:01 Config A/D Result=40 12:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:01 Get A/D filter: -9.255963e+061 result=40 12:47:01 Get A/D value=-858993460 result=40 12:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:01 Parameters OK 12:47:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:01 Set A/D data flow result=40 12:47:01 Set A/D channel type result=40 12:47:01 Set A/D encoding result=40 12:47:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:01 Set channel filter=0.000000e+000 result=40 12:47:01 Config A/D Result=40 12:47:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:01 Get A/D filter: -9.255963e+061 result=40 12:47:01 Get A/D value=-858993460 result=40 12:47:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:01 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:01 Aux= 12:47:01 Message to Camera, serial 10462 queued 12:47:31 Received message from Master: op=PointingHead serial=10469 12:47:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:47:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:47:32 Point started: ret=0 12:47:32 point_skyscan result=0 12:47:33 Check angles 12:47:33 SkyScan query 12:47:33 SkyScan query done: ret=0 az=134.58<-8972 ze=36.15<-9590 Statuses=0009 0009 12:47:33 Msec=0 True Az=134.58 Ze=36.15 Az status=0009 Ze status=0009 12:47:33 Check angles 12:47:33 SkyScan query 12:47:34 SkyScan query done: ret=0 az=117.06<-7804 ze=15.225<-10985 Statuses=0009 0009 12:47:34 Msec=750 True Az=117.06 Ze=15.225 Az status=0009 Ze status=0009 12:47:34 Check angles 12:47:34 SkyScan query 12:47:35 SkyScan query done: ret=0 az=99.63<-6642 ze=-5.745<-12383 Statuses=0009 0009 12:47:35 Msec=1500 True Az=99.63 Ze=-5.745 Az status=0009 Ze status=0009 12:47:35 Check angles 12:47:35 SkyScan query 12:47:35 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.105<-13807 Statuses=0009 0009 12:47:35 Msec=2250 True Az=81.81 Ze=-27.105 Az status=0009 Ze status=0009 12:47:36 Check angles 12:47:36 SkyScan query 12:47:36 SkyScan query done: ret=0 az=64.335<-4289 ze=-38.565<-14571 Statuses=0009 0008 12:47:36 Msec=3000 True Az=64.335 Ze=-38.565 Az status=0009 Ze status=0008 12:47:36 Check angles 12:47:36 SkyScan query 12:47:37 SkyScan query done: ret=0 az=46.575<-3105 ze=-38.535<-14569 Statuses=0009 0008 12:47:37 Msec=3750 True Az=46.575 Ze=-38.535 Az status=0009 Ze status=0008 12:47:37 Check angles 12:47:37 SkyScan query 12:47:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:47:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:47:38 Message to Master queued w/err=0: serial=10469 error=0 12:47:43 Received message from Master: op=Filter serial=10470 12:47:43 Color wheel filter change from 0 to 0 12:47:43 FLIGetFilterPos err=0 currentPosition=0 12:47:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:47:43 Filter is already there-color wheel unchanged 12:47:43 Received message from Master: op=Shutter serial=10471 12:47:43 Shutter LASER close 12:47:43 Received message from Camera: op=State serial=10473 12:47:43 GetSingleValue result=40 Value=cccccccc 12:47:43 SkyScan query 12:47:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:47:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:43 Parameters OK 12:47:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:43 Set A/D data flow result=40 12:47:43 Set A/D channel type result=40 12:47:43 Set A/D encoding result=40 12:47:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:43 Set channel filter=0.000000e+000 result=40 12:47:43 Config A/D Result=40 12:47:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:43 Get A/D filter: -9.255963e+061 result=40 12:47:43 Get A/D value=-858993460 result=40 12:47:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:47:43 Parameters OK 12:47:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:47:43 Set A/D data flow result=40 12:47:43 Set A/D channel type result=40 12:47:43 Set A/D encoding result=40 12:47:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:47:43 Set channel filter=0.000000e+000 result=40 12:47:43 Config A/D Result=40 12:47:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:47:43 Get A/D filter: -9.255963e+061 result=40 12:47:43 Get A/D value=-858993460 result=40 12:47:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:47:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:47:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:47:43 Aux= 12:47:43 Message to Camera, serial 10473 queued 12:48:14 Received message from Master: op=PointingHead serial=10480 12:48:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:48:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:48:15 Point started: ret=0 12:48:15 point_skyscan result=0 12:48:15 Check angles 12:48:15 SkyScan query 12:48:16 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.7<-16580 Statuses=0009 0009 12:48:16 Msec=0 True Az=64.2 Ze=-68.7 Az status=0009 Ze status=0009 12:48:16 Check angles 12:48:16 SkyScan query 12:48:17 SkyScan query done: ret=0 az=82.38<-5492 ze=-90.105<-18007 Statuses=0009 0009 12:48:17 Msec=750 True Az=82.38 Ze=-90.105 Az status=0009 Ze status=0009 12:48:17 Check angles 12:48:17 SkyScan query 12:48:18 SkyScan query done: ret=0 az=99.72<-6648 ze=-111.06<-19404 Statuses=0009 0009 12:48:18 Msec=1500 True Az=99.72 Ze=-111.06 Az status=0009 Ze status=0009 12:48:18 Check angles 12:48:18 SkyScan query 12:48:18 SkyScan query done: ret=0 az=117.06<-7804 ze=-132<-20800 Statuses=0009 0009 12:48:18 Msec=2250 True Az=117.06 Ze=-132 Az status=0009 Ze status=0009 12:48:18 Check angles 12:48:18 SkyScan query 12:48:19 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 12:48:19 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 12:48:19 Check angles 12:48:19 SkyScan query 12:48:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:48:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:48:20 Message to Master queued w/err=0: serial=10480 error=0 12:48:25 Received message from Master: op=Filter serial=10481 12:48:25 Color wheel filter change from 0 to 0 12:48:25 FLIGetFilterPos err=0 currentPosition=0 12:48:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:48:25 Filter is already there-color wheel unchanged 12:48:25 Received message from Master: op=Shutter serial=10482 12:48:25 Shutter LASER close 12:48:25 Received message from Camera: op=State serial=10484 12:48:25 GetSingleValue result=40 Value=cccccccc 12:48:25 SkyScan query 12:48:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:48:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:26 Parameters OK 12:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:26 Set A/D data flow result=40 12:48:26 Set A/D channel type result=40 12:48:26 Set A/D encoding result=40 12:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:26 Set channel filter=0.000000e+000 result=40 12:48:26 Config A/D Result=40 12:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:26 Get A/D filter: -9.255963e+061 result=40 12:48:26 Get A/D value=-858993460 result=40 12:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:48:26 Parameters OK 12:48:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:48:26 Set A/D data flow result=40 12:48:26 Set A/D channel type result=40 12:48:26 Set A/D encoding result=40 12:48:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:48:26 Set channel filter=0.000000e+000 result=40 12:48:26 Config A/D Result=40 12:48:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:48:26 Get A/D filter: -9.255963e+061 result=40 12:48:26 Get A/D value=-858993460 result=40 12:48:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:48:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:48:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:48:26 Aux= 12:48:26 Message to Camera, serial 10484 queued 12:48:56 Received message from Master: op=PointingHead serial=10491 12:48:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:48:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:48:57 Point started: ret=0 12:48:57 point_skyscan result=0 12:48:58 Check angles 12:48:58 SkyScan query 12:48:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 12:48:58 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 12:48:58 Check angles 12:48:58 SkyScan query 12:48:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:48:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:48:59 Message to Master queued w/err=0: serial=10491 error=0 12:49:04 Received message from Master: op=Filter serial=10492 12:49:04 Color wheel filter change from 0 to 0 12:49:04 FLIGetFilterPos err=0 currentPosition=0 12:49:04 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:04 Filter is already there-color wheel unchanged 12:49:04 Received message from Master: op=Shutter serial=10493 12:49:04 Shutter LASER open 12:49:04 Received message from Camera: op=State serial=10495 12:49:04 GetSingleValue result=40 Value=cccccccc 12:49:04 SkyScan query 12:49:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:49:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:05 Parameters OK 12:49:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:05 Set A/D data flow result=40 12:49:05 Set A/D channel type result=40 12:49:05 Set A/D encoding result=40 12:49:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:05 Set channel filter=0.000000e+000 result=40 12:49:05 Config A/D Result=40 12:49:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:05 Get A/D filter: -9.255963e+061 result=40 12:49:05 Get A/D value=-858993460 result=40 12:49:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:05 Parameters OK 12:49:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:05 Set A/D data flow result=40 12:49:05 Set A/D channel type result=40 12:49:05 Set A/D encoding result=40 12:49:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:05 Set channel filter=0.000000e+000 result=40 12:49:05 Config A/D Result=40 12:49:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:05 Get A/D filter: -9.255963e+061 result=40 12:49:05 Get A/D value=-858993460 result=40 12:49:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:05 Aux= 12:49:05 Message to Camera, serial 10495 queued 12:49:07 Received message from Master: op=Shutter serial=10499 12:49:07 Shutter LASER close 12:49:08 Received message from Master: op=PointingHead serial=10503 12:49:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:49:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:49:08 Point started: ret=0 12:49:08 point_skyscan result=0 12:49:09 Check angles 12:49:09 SkyScan query 12:49:10 SkyScan query done: ret=0 az=136.2<-9080 ze=-142.98<-21532 Statuses=0009 0009 12:49:10 Msec=0 True Az=136.2 Ze=-142.98 Az status=0009 Ze status=0009 12:49:10 Check angles [UTC 2018-12-4 12:49:10] 12:49:10 SkyScan query 12:49:10 SkyScan query done: ret=0 az=155.07<-10338 ze=-120.18<-20012 Statuses=0009 0009 12:49:10 Msec=750 True Az=155.07 Ze=-120.18 Az status=0009 Ze status=0009 12:49:10 Check angles 12:49:10 SkyScan query 12:49:11 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.1<-18740 Statuses=0009 0009 12:49:11 Msec=1500 True Az=171.045 Ze=-101.1 Az status=0009 Ze status=0009 12:49:11 Check angles 12:49:11 SkyScan query 12:49:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.68<-17312 Statuses=0008 0009 12:49:12 Msec=2250 True Az=176.01 Ze=-79.68 Az status=0008 Ze status=0009 12:49:12 Check angles 12:49:12 SkyScan query 12:49:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.725<-15915 Statuses=0008 0009 12:49:13 Msec=3000 True Az=175.995 Ze=-58.725 Az status=0008 Ze status=0009 12:49:13 Check angles 12:49:13 SkyScan query 12:49:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 12:49:13 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 12:49:13 Message to Master queued w/err=0: serial=10503 error=0 12:49:18 Received message from Master: op=Filter serial=10504 12:49:18 Color wheel filter change from 0 to 0 12:49:18 FLIGetFilterPos err=0 currentPosition=0 12:49:18 FLIGetStepsRemaining err=0 RemainingSteps=0 12:49:18 Filter is already there-color wheel unchanged 12:49:18 Received message from Master: op=Shutter serial=10505 12:49:18 Shutter LASER close 12:49:19 Received message from Camera: op=State serial=10507 12:49:19 GetSingleValue result=40 Value=cccccccc 12:49:19 SkyScan query 12:49:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:49:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:19 Parameters OK 12:49:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:19 Set A/D data flow result=40 12:49:19 Set A/D channel type result=40 12:49:19 Set A/D encoding result=40 12:49:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:19 Set channel filter=0.000000e+000 result=40 12:49:19 Config A/D Result=40 12:49:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:19 Get A/D filter: -9.255963e+061 result=40 12:49:19 Get A/D value=-858993460 result=40 12:49:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:49:19 Parameters OK 12:49:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:49:19 Set A/D data flow result=40 12:49:19 Set A/D channel type result=40 12:49:19 Set A/D encoding result=40 12:49:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:49:19 Set channel filter=0.000000e+000 result=40 12:49:19 Config A/D Result=40 12:49:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:49:19 Get A/D filter: -9.255963e+061 result=40 12:49:19 Get A/D value=-858993460 result=40 12:49:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:49:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:49:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:49:19 Aux= 12:49:19 Message to Camera, serial 10507 queued 12:49:50 Received message from Master: op=PointingHead serial=10514 12:49:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:49:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:49:50 Point started: ret=0 12:49:50 point_skyscan result=0 12:49:51 Check angles 12:49:51 SkyScan query 12:49:52 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.465<-13431 Statuses=0009 0009 12:49:52 Msec=0 True Az=152.79 Ze=-21.465 Az status=0009 Ze status=0009 12:49:52 Check angles 12:49:52 SkyScan query 12:49:52 SkyScan query done: ret=0 az=134.985<-8999 ze=-0.075<-12005 Statuses=0009 0009 12:49:52 Msec=750 True Az=134.985 Ze=-0.075 Az status=0009 Ze status=0009 12:49:53 Check angles 12:49:53 SkyScan query 12:49:53 SkyScan query done: ret=0 az=117.45<-7830 ze=20.865<-10609 Statuses=0009 0009 12:49:53 Msec=1500 True Az=117.45 Ze=20.865 Az status=0009 Ze status=0009 12:49:53 Check angles 12:49:53 SkyScan query 12:49:54 SkyScan query done: ret=0 az=100.065<-6671 ze=41.82<-9212 Statuses=0009 0009 12:49:54 Msec=2250 True Az=100.065 Ze=41.82 Az status=0009 Ze status=0009 12:49:54 Check angles 12:49:54 SkyScan query 12:49:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 12:49:55 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 12:49:55 Check angles 12:49:55 SkyScan query 12:49:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:49:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:49:56 Message to Master queued w/err=0: serial=10514 error=0 12:50:01 Received message from Master: op=Filter serial=10515 12:50:01 Color wheel filter change from 0 to 0 12:50:01 FLIGetFilterPos err=0 currentPosition=0 12:50:01 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:01 Filter is already there-color wheel unchanged 12:50:01 Received message from Master: op=Shutter serial=10516 12:50:01 Shutter LASER close 12:50:01 Received message from Camera: op=State serial=10518 12:50:01 GetSingleValue result=40 Value=cccccccc 12:50:01 SkyScan query 12:50:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:50:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:01 Parameters OK 12:50:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:01 Set A/D data flow result=40 12:50:01 Set A/D channel type result=40 12:50:01 Set A/D encoding result=40 12:50:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:01 Set channel filter=0.000000e+000 result=40 12:50:01 Config A/D Result=40 12:50:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:01 Get A/D filter: -9.255963e+061 result=40 12:50:01 Get A/D value=-858993460 result=40 12:50:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:01 Parameters OK 12:50:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:01 Set A/D data flow result=40 12:50:01 Set A/D channel type result=40 12:50:01 Set A/D encoding result=40 12:50:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:01 Set channel filter=0.000000e+000 result=40 12:50:01 Config A/D Result=40 12:50:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:01 Get A/D filter: -9.255963e+061 result=40 12:50:01 Get A/D value=-858993460 result=40 12:50:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:01 Aux= 12:50:01 Message to Camera, serial 10518 queued 12:50:32 Received message from Master: op=PointingHead serial=10525 12:50:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:50:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:50:33 Point started: ret=0 12:50:33 point_skyscan result=0 12:50:33 Check angles 12:50:33 SkyScan query 12:50:34 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 12:50:34 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 12:50:34 Check angles 12:50:34 SkyScan query 12:50:35 SkyScan query done: ret=0 az=126.78<-8452 ze=38.505<-9433 Statuses=0009 0008 12:50:35 Msec=750 True Az=126.78 Ze=38.505 Az status=0009 Ze status=0008 12:50:35 Check angles 12:50:35 SkyScan query 12:50:35 SkyScan query done: ret=0 az=144.21<-9614 ze=38.505<-9433 Statuses=0009 0008 12:50:35 Msec=1500 True Az=144.21 Ze=38.505 Az status=0009 Ze status=0008 12:50:36 Check angles 12:50:36 SkyScan query 12:50:36 SkyScan query done: ret=0 az=161.61<-10774 ze=38.505<-9433 Statuses=0009 0008 12:50:36 Msec=2250 True Az=161.61 Ze=38.505 Az status=0009 Ze status=0008 12:50:36 Check angles 12:50:36 SkyScan query 12:50:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:50:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:50:37 Check angles 12:50:37 SkyScan query 12:50:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:50:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:50:38 Message to Master queued w/err=0: serial=10525 error=0 12:50:43 Received message from Master: op=Filter serial=10526 12:50:43 Color wheel filter change from 0 to 0 12:50:43 FLIGetFilterPos err=0 currentPosition=0 12:50:43 FLIGetStepsRemaining err=0 RemainingSteps=0 12:50:43 Filter is already there-color wheel unchanged 12:50:43 Received message from Master: op=Shutter serial=10527 12:50:43 Shutter LASER close 12:50:43 Received message from Camera: op=State serial=10529 12:50:43 GetSingleValue result=40 Value=cccccccc 12:50:43 SkyScan query 12:50:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:50:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:43 Parameters OK 12:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:43 Set A/D data flow result=40 12:50:43 Set A/D channel type result=40 12:50:43 Set A/D encoding result=40 12:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:43 Set channel filter=0.000000e+000 result=40 12:50:43 Config A/D Result=40 12:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:43 Get A/D filter: -9.255963e+061 result=40 12:50:43 Get A/D value=-858993460 result=40 12:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:50:43 Parameters OK 12:50:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:50:43 Set A/D data flow result=40 12:50:43 Set A/D channel type result=40 12:50:43 Set A/D encoding result=40 12:50:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:50:43 Set channel filter=0.000000e+000 result=40 12:50:43 Config A/D Result=40 12:50:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:50:43 Get A/D filter: -9.255963e+061 result=40 12:50:43 Get A/D value=-858993460 result=40 12:50:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:50:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:50:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:50:43 Aux= 12:50:43 Message to Camera, serial 10529 queued 12:51:14 Received message from Master: op=PointingHead serial=10536 12:51:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:51:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:51:15 Point started: ret=0 12:51:15 point_skyscan result=0 12:51:15 Check angles 12:51:15 SkyScan query 12:51:16 SkyScan query done: ret=0 az=152.97<-10198 ze=8.82<-11412 Statuses=0009 0009 12:51:16 Msec=0 True Az=152.97 Ze=8.82 Az status=0009 Ze status=0009 12:51:16 Check angles 12:51:16 SkyScan query 12:51:17 SkyScan query done: ret=0 az=135.585<-9039 ze=-12.12<-12808 Statuses=0009 0009 12:51:17 Msec=750 True Az=135.585 Ze=-12.12 Az status=0009 Ze status=0009 12:51:17 Check angles 12:51:17 SkyScan query 12:51:17 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.495<-14233 Statuses=0009 0009 12:51:17 Msec=1500 True Az=117.585 Ze=-33.495 Az status=0009 Ze status=0009 12:51:18 Check angles 12:51:18 SkyScan query 12:51:18 SkyScan query done: ret=0 az=100.185<-6679 ze=-51.54<-15436 Statuses=0009 0009 12:51:18 Msec=2250 True Az=100.185 Ze=-51.54 Az status=0009 Ze status=0009 12:51:18 Check angles 12:51:18 SkyScan query 12:51:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:51:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:51:19 Check angles 12:51:19 SkyScan query 12:51:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 12:51:20 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 12:51:20 Message to Master queued w/err=0: serial=10536 error=0 12:51:25 Received message from Master: op=Filter serial=10537 12:51:25 Color wheel filter change from 0 to 0 12:51:25 FLIGetFilterPos err=0 currentPosition=0 12:51:25 FLIGetStepsRemaining err=0 RemainingSteps=0 12:51:25 Filter is already there-color wheel unchanged 12:51:25 Received message from Master: op=Shutter serial=10538 12:51:25 Shutter LASER close 12:51:25 Received message from Camera: op=State serial=10540 12:51:25 GetSingleValue result=40 Value=cccccccc 12:51:25 SkyScan query 12:51:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:51:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:26 Parameters OK 12:51:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:26 Set A/D data flow result=40 12:51:26 Set A/D channel type result=40 12:51:26 Set A/D encoding result=40 12:51:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:26 Set channel filter=0.000000e+000 result=40 12:51:26 Config A/D Result=40 12:51:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:26 Get A/D filter: -9.255963e+061 result=40 12:51:26 Get A/D value=-858993460 result=40 12:51:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:51:26 Parameters OK 12:51:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:51:26 Set A/D data flow result=40 12:51:26 Set A/D channel type result=40 12:51:26 Set A/D encoding result=40 12:51:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:51:26 Set channel filter=0.000000e+000 result=40 12:51:26 Config A/D Result=40 12:51:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:51:26 Get A/D filter: -9.255963e+061 result=40 12:51:26 Get A/D value=-858993460 result=40 12:51:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:51:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:51:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:51:26 Aux= 12:51:26 Message to Camera, serial 10540 queued 12:51:49 Received message from Master: op=Identify serial=10541 12:51:56 Received message from Master: op=PointingHead serial=10550 12:51:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:51:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:51:57 Point started: ret=0 12:51:57 point_skyscan result=0 12:51:57 Check angles 12:51:57 SkyScan query 12:51:58 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.12<-17408 Statuses=0009 0009 12:51:58 Msec=0 True Az=108.825 Ze=-81.12 Az status=0009 Ze status=0009 12:51:58 Check angles 12:51:58 SkyScan query 12:51:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.075<-18805 Statuses=0008 0009 12:51:59 Msec=750 True Az=112.995 Ze=-102.075 Az status=0008 Ze status=0009 12:51:59 Check angles 12:51:59 SkyScan query 12:52:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 12:52:00 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 12:52:00 Check angles 12:52:00 SkyScan query 12:52:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.985<-21599 Statuses=0008 0009 12:52:00 Msec=2250 True Az=112.995 Ze=-143.985 Az status=0008 Ze status=0009 12:52:00 Check angles 12:52:00 SkyScan query 12:52:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.94<-22996 Statuses=0008 0009 12:52:01 Msec=3000 True Az=112.995 Ze=-164.94 Az status=0008 Ze status=0009 12:52:01 Check angles 12:52:01 SkyScan query 12:52:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:52:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:52:02 Message to Master queued w/err=0: serial=10550 error=0 12:52:07 Received message from Master: op=Filter serial=10551 12:52:07 Color wheel filter change from 0 to 0 12:52:07 FLIGetFilterPos err=0 currentPosition=0 12:52:07 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:07 Filter is already there-color wheel unchanged 12:52:07 Received message from Master: op=Shutter serial=10552 12:52:07 Shutter LASER open 12:52:07 Received message from Camera: op=State serial=10554 12:52:07 GetSingleValue result=40 Value=cccccccc 12:52:07 SkyScan query 12:52:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:52:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:08 Parameters OK 12:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:08 Set A/D data flow result=40 12:52:08 Set A/D channel type result=40 12:52:08 Set A/D encoding result=40 12:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:08 Set channel filter=0.000000e+000 result=40 12:52:08 Config A/D Result=40 12:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:08 Get A/D filter: -9.255963e+061 result=40 12:52:08 Get A/D value=-858993460 result=40 12:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:08 Parameters OK 12:52:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:08 Set A/D data flow result=40 12:52:08 Set A/D channel type result=40 12:52:08 Set A/D encoding result=40 12:52:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:08 Set channel filter=0.000000e+000 result=40 12:52:08 Config A/D Result=40 12:52:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:08 Get A/D filter: -9.255963e+061 result=40 12:52:08 Get A/D value=-858993460 result=40 12:52:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:08 Aux= 12:52:08 Message to Camera, serial 10554 queued [UTC 2018-12-4 12:52:09] 12:52:10 Received message from Master: op=Shutter serial=10558 12:52:10 Shutter LASER close 12:52:11 Received message from Master: op=PointingHead serial=10562 12:52:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:52:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:52:11 Point started: ret=0 12:52:11 point_skyscan result=0 12:52:12 Check angles 12:52:12 SkyScan query 12:52:12 SkyScan query done: ret=0 az=89.925<-5995 ze=157.35<-1510 Statuses=0009 0009 12:52:12 Msec=0 True Az=89.925 Ze=157.35 Az status=0009 Ze status=0009 12:52:12 Check angles 12:52:12 SkyScan query 12:52:13 SkyScan query done: ret=0 az=72.15<-4810 ze=135.945<-2937 Statuses=0009 0009 12:52:13 Msec=750 True Az=72.15 Ze=135.945 Az status=0009 Ze status=0009 12:52:13 Check angles 12:52:13 SkyScan query 12:52:14 SkyScan query done: ret=0 az=54.795<-3653 ze=115.005<-4333 Statuses=0009 0009 12:52:14 Msec=1500 True Az=54.795 Ze=115.005 Az status=0009 Ze status=0009 12:52:14 Check angles 12:52:14 SkyScan query 12:52:15 SkyScan query done: ret=0 az=40.845<-2723 ze=94.05<-5730 Statuses=0009 0009 12:52:15 Msec=2250 True Az=40.845 Ze=94.05 Az status=0009 Ze status=0009 12:52:15 Check angles 12:52:15 SkyScan query 12:52:15 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 12:52:15 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 12:52:15 Check angles 12:52:15 SkyScan query 12:52:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 12:52:16 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 12:52:16 Check angles 12:52:16 SkyScan query 12:52:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:52:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:52:17 Message to Master queued w/err=0: serial=10562 error=0 12:52:22 Received message from Master: op=Filter serial=10563 12:52:22 Color wheel filter change from 0 to 0 12:52:22 FLIGetFilterPos err=0 currentPosition=0 12:52:22 FLIGetStepsRemaining err=0 RemainingSteps=0 12:52:22 Filter is already there-color wheel unchanged 12:52:22 Received message from Master: op=Shutter serial=10564 12:52:22 Shutter LASER close 12:52:22 Received message from Camera: op=State serial=10566 12:52:22 GetSingleValue result=40 Value=cccccccc 12:52:22 SkyScan query 12:52:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:52:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:23 Parameters OK 12:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:23 Set A/D data flow result=40 12:52:23 Set A/D channel type result=40 12:52:23 Set A/D encoding result=40 12:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:23 Set channel filter=0.000000e+000 result=40 12:52:23 Config A/D Result=40 12:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:23 Get A/D filter: -9.255963e+061 result=40 12:52:23 Get A/D value=-858993460 result=40 12:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:52:23 Parameters OK 12:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:52:23 Set A/D data flow result=40 12:52:23 Set A/D channel type result=40 12:52:23 Set A/D encoding result=40 12:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:52:23 Set channel filter=0.000000e+000 result=40 12:52:23 Config A/D Result=40 12:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:52:23 Get A/D filter: -9.255963e+061 result=40 12:52:23 Get A/D value=-858993460 result=40 12:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:52:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:52:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:52:23 Aux= 12:52:23 Message to Camera, serial 10566 queued 12:52:54 Received message from Master: op=PointingHead serial=10573 12:52:54 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:52:54 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:52:54 Point started: ret=0 12:52:54 point_skyscan result=0 12:52:55 Check angles 12:52:55 SkyScan query 12:52:55 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 12:52:55 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 12:52:55 Check angles 12:52:55 SkyScan query 12:52:56 SkyScan query done: ret=0 az=81.45<-5430 ze=66.51<-7566 Statuses=0009 0008 12:52:56 Msec=750 True Az=81.45 Ze=66.51 Az status=0009 Ze status=0008 12:52:56 Check angles 12:52:56 SkyScan query 12:52:57 SkyScan query done: ret=0 az=99.135<-6609 ze=66.495<-7567 Statuses=0009 0008 12:52:57 Msec=1500 True Az=99.135 Ze=66.495 Az status=0009 Ze status=0008 12:52:57 Check angles 12:52:57 SkyScan query 12:52:57 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 12:52:57 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 12:52:58 Check angles 12:52:58 SkyScan query 12:52:58 SkyScan query done: ret=0 az=133.98<-8932 ze=66.495<-7567 Statuses=0009 0008 12:52:58 Msec=3000 True Az=133.98 Ze=66.495 Az status=0009 Ze status=0008 12:52:58 Check angles 12:52:58 SkyScan query 12:52:59 SkyScan query done: ret=0 az=151.275<-10085 ze=66.495<-7567 Statuses=0009 0008 12:52:59 Msec=3750 True Az=151.275 Ze=66.495 Az status=0009 Ze status=0008 12:52:59 Check angles 12:52:59 SkyScan query 12:53:00 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:53:00 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:53:00 Message to Master queued w/err=0: serial=10573 error=0 12:53:05 Received message from Master: op=Filter serial=10574 12:53:05 Color wheel filter change from 0 to 0 12:53:05 FLIGetFilterPos err=0 currentPosition=0 12:53:05 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:05 Filter is already there-color wheel unchanged 12:53:05 Received message from Master: op=Shutter serial=10575 12:53:05 Shutter LASER close 12:53:05 Received message from Camera: op=State serial=10577 12:53:05 GetSingleValue result=40 Value=cccccccc 12:53:05 SkyScan query 12:53:06 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:53:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:06 Parameters OK 12:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:06 Set A/D data flow result=40 12:53:06 Set A/D channel type result=40 12:53:06 Set A/D encoding result=40 12:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:06 Set channel filter=0.000000e+000 result=40 12:53:06 Config A/D Result=40 12:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:06 Get A/D filter: -9.255963e+061 result=40 12:53:06 Get A/D value=-858993460 result=40 12:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:06 Parameters OK 12:53:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:06 Set A/D data flow result=40 12:53:06 Set A/D channel type result=40 12:53:06 Set A/D encoding result=40 12:53:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:06 Set channel filter=0.000000e+000 result=40 12:53:06 Config A/D Result=40 12:53:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:06 Get A/D filter: -9.255963e+061 result=40 12:53:06 Get A/D value=-858993460 result=40 12:53:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:06 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:06 Aux= 12:53:06 Message to Camera, serial 10577 queued 12:53:37 Received message from Master: op=PointingHead serial=10584 12:53:37 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:53:37 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:53:37 Point started: ret=0 12:53:37 point_skyscan result=0 12:53:38 Check angles 12:53:38 SkyScan query 12:53:38 SkyScan query done: ret=0 az=135.105<-9007 ze=36.81<-9546 Statuses=0009 0009 12:53:38 Msec=0 True Az=135.105 Ze=36.81 Az status=0009 Ze status=0009 12:53:38 Check angles 12:53:38 SkyScan query 12:53:39 SkyScan query done: ret=0 az=117.12<-7808 ze=15.45<-10970 Statuses=0009 0009 12:53:39 Msec=750 True Az=117.12 Ze=15.45 Az status=0009 Ze status=0009 12:53:39 Check angles 12:53:39 SkyScan query 12:53:40 SkyScan query done: ret=0 az=99.885<-6659 ze=-5.55<-12370 Statuses=0009 0009 12:53:40 Msec=1500 True Az=99.885 Ze=-5.55 Az status=0009 Ze status=0009 12:53:40 Check angles 12:53:40 SkyScan query 12:53:40 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.505<-13767 Statuses=0009 0009 12:53:40 Msec=2250 True Az=82.29 Ze=-26.505 Az status=0009 Ze status=0009 12:53:41 Check angles 12:53:41 SkyScan query 12:53:41 SkyScan query done: ret=0 az=64.86<-4324 ze=-38.565<-14571 Statuses=0009 0008 12:53:41 Msec=3000 True Az=64.86 Ze=-38.565 Az status=0009 Ze status=0008 12:53:41 Check angles 12:53:41 SkyScan query 12:53:42 SkyScan query done: ret=0 az=47.43<-3162 ze=-38.535<-14569 Statuses=0009 0008 12:53:42 Msec=3750 True Az=47.43 Ze=-38.535 Az status=0009 Ze status=0008 12:53:42 Check angles 12:53:42 SkyScan query 12:53:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:53:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 12:53:43 Message to Master queued w/err=0: serial=10584 error=0 12:53:48 Received message from Master: op=Filter serial=10585 12:53:48 Color wheel filter change from 0 to 0 12:53:48 FLIGetFilterPos err=0 currentPosition=0 12:53:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:53:48 Filter is already there-color wheel unchanged 12:53:48 Received message from Master: op=Shutter serial=10586 12:53:48 Shutter LASER close 12:53:48 Received message from Camera: op=State serial=10588 12:53:48 GetSingleValue result=40 Value=cccccccc 12:53:48 SkyScan query 12:53:49 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:53:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:49 Parameters OK 12:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:49 Set A/D data flow result=40 12:53:49 Set A/D channel type result=40 12:53:49 Set A/D encoding result=40 12:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:49 Set channel filter=0.000000e+000 result=40 12:53:49 Config A/D Result=40 12:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:49 Get A/D filter: -9.255963e+061 result=40 12:53:49 Get A/D value=-858993460 result=40 12:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:53:49 Parameters OK 12:53:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:53:49 Set A/D data flow result=40 12:53:49 Set A/D channel type result=40 12:53:49 Set A/D encoding result=40 12:53:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:53:49 Set channel filter=0.000000e+000 result=40 12:53:49 Config A/D Result=40 12:53:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:53:49 Get A/D filter: -9.255963e+061 result=40 12:53:49 Get A/D value=-858993460 result=40 12:53:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:53:49 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:53:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:53:49 Aux= 12:53:49 Message to Camera, serial 10588 queued 12:54:19 Received message from Master: op=PointingHead serial=10595 12:54:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 12:54:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 12:54:20 Point started: ret=0 12:54:20 point_skyscan result=0 12:54:20 Check angles 12:54:20 SkyScan query 12:54:21 SkyScan query done: ret=0 az=64.395<-4293 ze=-68.835<-16589 Statuses=0009 0009 12:54:21 Msec=0 True Az=64.395 Ze=-68.835 Az status=0009 Ze status=0009 12:54:21 Check angles 12:54:21 SkyScan query 12:54:22 SkyScan query done: ret=0 az=82.035<-5469 ze=-89.79<-17986 Statuses=0009 0009 12:54:22 Msec=750 True Az=82.035 Ze=-89.79 Az status=0009 Ze status=0009 12:54:22 Check angles 12:54:22 SkyScan query 12:54:23 SkyScan query done: ret=0 az=99.54<-6636 ze=-110.73<-19382 Statuses=0009 0009 12:54:23 Msec=1500 True Az=99.54 Ze=-110.73 Az status=0009 Ze status=0009 12:54:23 Check angles 12:54:23 SkyScan query 12:54:23 SkyScan query done: ret=0 az=116.955<-7797 ze=-131.685<-20779 Statuses=0009 0009 12:54:23 Msec=2250 True Az=116.955 Ze=-131.685 Az status=0009 Ze status=0009 12:54:23 Check angles 12:54:23 SkyScan query 12:54:24 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 12:54:24 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 12:54:24 Check angles 12:54:24 SkyScan query 12:54:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 12:54:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 12:54:25 Message to Master queued w/err=0: serial=10595 error=0 12:54:30 Received message from Master: op=Filter serial=10596 12:54:30 Color wheel filter change from 0 to 0 12:54:30 FLIGetFilterPos err=0 currentPosition=0 12:54:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:54:30 Filter is already there-color wheel unchanged 12:54:30 Received message from Master: op=Shutter serial=10597 12:54:30 Shutter LASER close 12:54:30 Received message from Camera: op=State serial=10599 12:54:30 GetSingleValue result=40 Value=cccccccc 12:54:30 SkyScan query 12:54:31 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 12:54:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:31 Parameters OK 12:54:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:31 Set A/D data flow result=40 12:54:31 Set A/D channel type result=40 12:54:31 Set A/D encoding result=40 12:54:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:31 Set channel filter=0.000000e+000 result=40 12:54:31 Config A/D Result=40 12:54:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:31 Get A/D filter: -9.255963e+061 result=40 12:54:31 Get A/D value=-858993460 result=40 12:54:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:54:31 Parameters OK 12:54:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:54:31 Set A/D data flow result=40 12:54:31 Set A/D channel type result=40 12:54:31 Set A/D encoding result=40 12:54:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:54:31 Set channel filter=0.000000e+000 result=40 12:54:31 Config A/D Result=40 12:54:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:54:31 Get A/D filter: -9.255963e+061 result=40 12:54:31 Get A/D value=-858993460 result=40 12:54:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:54:31 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:54:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:54:31 Aux= 12:54:31 Message to Camera, serial 10599 queued 12:55:01 Received message from Master: op=PointingHead serial=10606 12:55:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:55:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:55:02 Point started: ret=0 12:55:02 point_skyscan result=0 12:55:03 Check angles 12:55:03 SkyScan query 12:55:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 12:55:03 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 12:55:03 Check angles 12:55:03 SkyScan query 12:55:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 12:55:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 12:55:04 Message to Master queued w/err=0: serial=10606 error=0 12:55:09 Received message from Master: op=Filter serial=10607 12:55:09 Color wheel filter change from 0 to 0 12:55:09 FLIGetFilterPos err=0 currentPosition=0 12:55:09 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:09 Filter is already there-color wheel unchanged 12:55:09 Received message from Master: op=Shutter serial=10608 12:55:09 Shutter LASER open 12:55:09 Received message from Camera: op=State serial=10610 12:55:09 GetSingleValue result=40 Value=cccccccc 12:55:09 SkyScan query 12:55:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:55:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:10 Parameters OK 12:55:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:10 Set A/D data flow result=40 12:55:10 Set A/D channel type result=40 12:55:10 Set A/D encoding result=40 12:55:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:10 Set channel filter=0.000000e+000 result=40 12:55:10 Config A/D Result=40 12:55:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:10 Get A/D filter: -9.255963e+061 result=40 12:55:10 Get A/D value=-858993460 result=40 12:55:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:10 Parameters OK 12:55:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:10 Set A/D data flow result=40 12:55:10 Set A/D channel type result=40 12:55:10 Set A/D encoding result=40 12:55:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:10 Set channel filter=0.000000e+000 result=40 12:55:10 Config A/D Result=40 12:55:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:10 Get A/D filter: -9.255963e+061 result=40 12:55:10 Get A/D value=-858993460 result=40 12:55:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:10 Aux= 12:55:10 Message to Camera, serial 10610 queued 12:55:12 Received message from Master: op=Shutter serial=10614 12:55:12 Shutter LASER close 12:55:13 Received message from Master: op=PointingHead serial=10618 12:55:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 12:55:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 12:55:13 Point started: ret=0 12:55:13 point_skyscan result=0 12:55:14 Check angles 12:55:14 SkyScan query 12:55:14 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.34<-21556 Statuses=0009 0009 12:55:14 Msec=0 True Az=135.9 Ze=-143.34 Az status=0009 Ze status=0009 12:55:15 Check angles 12:55:15 SkyScan query 12:55:15 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.37<-20158 Statuses=0009 0009 12:55:15 Msec=750 True Az=153.36 Ze=-122.37 Az status=0009 Ze status=0009 12:55:15 Check angles 12:55:15 SkyScan query 12:55:16 SkyScan query done: ret=0 az=171.18<-11412 ze=-100.995<-18733 Statuses=0009 0009 12:55:16 Msec=1500 True Az=171.18 Ze=-100.995 Az status=0009 Ze status=0009 12:55:16 Check angles 12:55:16 SkyScan query 12:55:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.605<-17307 Statuses=0008 0009 12:55:17 Msec=2250 True Az=176.025 Ze=-79.605 Az status=0008 Ze status=0009 12:55:17 Check angles 12:55:17 SkyScan query 12:55:18 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 12:55:18 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 12:55:18 Check angles 12:55:18 SkyScan query 12:55:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 12:55:18 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 12:55:18 Message to Master queued w/err=0: serial=10618 error=0 12:55:23 Received message from Master: op=Filter serial=10619 12:55:23 Color wheel filter change from 0 to 0 12:55:23 FLIGetFilterPos err=0 currentPosition=0 12:55:23 FLIGetStepsRemaining err=0 RemainingSteps=0 12:55:23 Filter is already there-color wheel unchanged 12:55:23 Received message from Master: op=Shutter serial=10620 12:55:23 Shutter LASER close 12:55:24 Received message from Camera: op=State serial=10622 12:55:24 GetSingleValue result=40 Value=cccccccc 12:55:24 SkyScan query 12:55:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 12:55:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:24 Parameters OK 12:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:24 Set A/D data flow result=40 12:55:24 Set A/D channel type result=40 12:55:24 Set A/D encoding result=40 12:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:24 Set channel filter=0.000000e+000 result=40 12:55:24 Config A/D Result=40 12:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:24 Get A/D filter: -9.255963e+061 result=40 12:55:24 Get A/D value=-858993460 result=40 12:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:55:24 Parameters OK 12:55:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:55:24 Set A/D data flow result=40 12:55:24 Set A/D channel type result=40 12:55:24 Set A/D encoding result=40 12:55:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:55:24 Set channel filter=0.000000e+000 result=40 12:55:24 Config A/D Result=40 12:55:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:55:24 Get A/D filter: -9.255963e+061 result=40 12:55:24 Get A/D value=-858993460 result=40 12:55:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:55:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:55:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:55:24 Aux= 12:55:24 Message to Camera, serial 10622 queued 12:55:55 Received message from Master: op=PointingHead serial=10629 12:55:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 12:55:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 12:55:55 Point started: ret=0 12:55:55 point_skyscan result=0 12:55:56 Check angles 12:55:56 SkyScan query 12:55:57 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.21<-13414 Statuses=0009 0009 12:55:57 Msec=0 True Az=152.61 Ze=-21.21 Az status=0009 Ze status=0009 12:55:57 Check angles 12:55:57 SkyScan query 12:55:57 SkyScan query done: ret=0 az=134.64<-8976 ze=0.18<-11988 Statuses=0009 0009 12:55:57 Msec=750 True Az=134.64 Ze=0.18 Az status=0009 Ze status=0009 12:55:58 Check angles 12:55:58 SkyScan query 12:55:58 SkyScan query done: ret=0 az=117.105<-7807 ze=21.165<-10589 Statuses=0009 0009 12:55:58 Msec=1500 True Az=117.105 Ze=21.165 Az status=0009 Ze status=0009 12:55:58 Check angles 12:55:58 SkyScan query 12:55:59 SkyScan query done: ret=0 az=99.69<-6646 ze=42.12<-9192 Statuses=0009 0009 12:55:59 Msec=2250 True Az=99.69 Ze=42.12 Az status=0009 Ze status=0009 12:55:59 Check angles 12:55:59 SkyScan query 12:56:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 12:56:00 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 12:56:00 Check angles 12:56:00 SkyScan query 12:56:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 12:56:01 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 12:56:01 Message to Master queued w/err=0: serial=10629 error=0 12:56:06 Received message from Master: op=Filter serial=10630 12:56:06 Color wheel filter change from 0 to 0 12:56:06 FLIGetFilterPos err=0 currentPosition=0 12:56:06 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:06 Filter is already there-color wheel unchanged 12:56:06 Received message from Master: op=Shutter serial=10631 12:56:06 Shutter LASER close 12:56:06 Received message from Camera: op=State serial=10633 12:56:06 GetSingleValue result=40 Value=cccccccc 12:56:06 SkyScan query 12:56:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 12:56:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:06 Parameters OK 12:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:06 Set A/D data flow result=40 12:56:06 Set A/D channel type result=40 12:56:06 Set A/D encoding result=40 12:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:06 Set channel filter=0.000000e+000 result=40 12:56:06 Config A/D Result=40 12:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:06 Get A/D filter: -9.255963e+061 result=40 12:56:06 Get A/D value=-858993460 result=40 12:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:06 Parameters OK 12:56:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:06 Set A/D data flow result=40 12:56:06 Set A/D channel type result=40 12:56:06 Set A/D encoding result=40 12:56:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:06 Set channel filter=0.000000e+000 result=40 12:56:06 Config A/D Result=40 12:56:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:06 Get A/D filter: -9.255963e+061 result=40 12:56:06 Get A/D value=-858993460 result=40 12:56:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:06 Aux= 12:56:06 Message to Camera, serial 10633 queued 12:56:37 Received message from Master: op=PointingHead serial=10640 12:56:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 12:56:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 12:56:38 Point started: ret=0 12:56:38 point_skyscan result=0 12:56:38 Check angles 12:56:38 SkyScan query 12:56:39 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 12:56:39 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 12:56:39 Check angles 12:56:39 SkyScan query 12:56:40 SkyScan query done: ret=0 az=126.765<-8451 ze=38.505<-9433 Statuses=0009 0008 12:56:40 Msec=750 True Az=126.765 Ze=38.505 Az status=0009 Ze status=0008 12:56:40 Check angles 12:56:40 SkyScan query 12:56:40 SkyScan query done: ret=0 az=144.135<-9609 ze=38.505<-9433 Statuses=0009 0008 12:56:40 Msec=1500 True Az=144.135 Ze=38.505 Az status=0009 Ze status=0008 12:56:41 Check angles 12:56:41 SkyScan query 12:56:41 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 12:56:41 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 12:56:41 Check angles 12:56:41 SkyScan query 12:56:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 12:56:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 12:56:42 Check angles 12:56:42 SkyScan query 12:56:43 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 12:56:43 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 12:56:43 Message to Master queued w/err=0: serial=10640 error=0 12:56:48 Received message from Master: op=Filter serial=10641 12:56:48 Color wheel filter change from 0 to 0 12:56:48 FLIGetFilterPos err=0 currentPosition=0 12:56:48 FLIGetStepsRemaining err=0 RemainingSteps=0 12:56:48 Filter is already there-color wheel unchanged 12:56:48 Received message from Master: op=Shutter serial=10642 12:56:48 Shutter LASER close 12:56:48 Received message from Camera: op=State serial=10644 12:56:48 GetSingleValue result=40 Value=cccccccc 12:56:48 SkyScan query 12:56:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 12:56:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:48 Parameters OK 12:56:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:48 Set A/D data flow result=40 12:56:48 Set A/D channel type result=40 12:56:48 Set A/D encoding result=40 12:56:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:48 Set channel filter=0.000000e+000 result=40 12:56:48 Config A/D Result=40 12:56:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:48 Get A/D filter: -9.255963e+061 result=40 12:56:48 Get A/D value=-858993460 result=40 12:56:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:56:48 Parameters OK 12:56:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:56:48 Set A/D data flow result=40 12:56:48 Set A/D channel type result=40 12:56:48 Set A/D encoding result=40 12:56:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:56:48 Set channel filter=0.000000e+000 result=40 12:56:48 Config A/D Result=40 12:56:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:56:48 Get A/D filter: -9.255963e+061 result=40 12:56:48 Get A/D value=-858993460 result=40 12:56:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:56:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:56:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:56:48 Aux= 12:56:48 Message to Camera, serial 10644 queued 12:57:19 Received message from Master: op=PointingHead serial=10651 12:57:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 12:57:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 12:57:20 Point started: ret=0 12:57:20 point_skyscan result=0 12:57:20 Check angles 12:57:20 SkyScan query 12:57:21 SkyScan query done: ret=0 az=153.12<-10208 ze=8.88<-11408 Statuses=0009 0009 12:57:21 Msec=0 True Az=153.12 Ze=8.88 Az status=0009 Ze status=0009 12:57:21 Check angles 12:57:21 SkyScan query 12:57:22 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.51<-12834 Statuses=0009 0009 12:57:22 Msec=750 True Az=135.285 Ze=-12.51 Az status=0009 Ze status=0009 12:57:22 Check angles 12:57:22 SkyScan query 12:57:22 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.885<-14259 Statuses=0009 0009 12:57:22 Msec=1500 True Az=117.375 Ze=-33.885 Az status=0009 Ze status=0009 12:57:23 Check angles 12:57:23 SkyScan query 12:57:23 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.54<-15436 Statuses=0009 0009 12:57:23 Msec=2250 True Az=100.005 Ze=-51.54 Az status=0009 Ze status=0009 12:57:23 Check angles 12:57:23 SkyScan query 12:57:24 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 12:57:24 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 12:57:24 Check angles 12:57:24 SkyScan query 12:57:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:57:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 12:57:25 Message to Master queued w/err=0: serial=10651 error=0 12:57:30 Received message from Master: op=Filter serial=10652 12:57:30 Color wheel filter change from 0 to 0 12:57:30 FLIGetFilterPos err=0 currentPosition=0 12:57:30 FLIGetStepsRemaining err=0 RemainingSteps=0 12:57:30 Filter is already there-color wheel unchanged 12:57:30 Received message from Master: op=Shutter serial=10653 12:57:30 Shutter LASER close 12:57:30 Received message from Camera: op=State serial=10655 12:57:30 GetSingleValue result=40 Value=cccccccc 12:57:30 SkyScan query 12:57:31 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 12:57:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:31 Parameters OK 12:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:31 Set A/D data flow result=40 12:57:31 Set A/D channel type result=40 12:57:31 Set A/D encoding result=40 12:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:31 Set channel filter=0.000000e+000 result=40 12:57:31 Config A/D Result=40 12:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:31 Get A/D filter: -9.255963e+061 result=40 12:57:31 Get A/D value=-858993460 result=40 12:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:57:31 Parameters OK 12:57:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:57:31 Set A/D data flow result=40 12:57:31 Set A/D channel type result=40 12:57:31 Set A/D encoding result=40 12:57:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:57:31 Set channel filter=0.000000e+000 result=40 12:57:31 Config A/D Result=40 12:57:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:57:31 Get A/D filter: -9.255963e+061 result=40 12:57:31 Get A/D value=-858993460 result=40 12:57:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:57:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:57:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:57:31 Aux= 12:57:31 Message to Camera, serial 10655 queued 12:58:01 Received message from Master: op=PointingHead serial=10662 12:58:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 12:58:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 12:58:02 Point started: ret=0 12:58:02 point_skyscan result=0 12:58:02 Check angles 12:58:02 SkyScan query 12:58:03 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.3<-17420 Statuses=0009 0009 12:58:03 Msec=0 True Az=108.975 Ze=-81.3 Az status=0009 Ze status=0009 12:58:03 Check angles 12:58:03 SkyScan query 12:58:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 12:58:04 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 12:58:04 Check angles 12:58:04 SkyScan query 12:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.195<-20213 Statuses=0008 0009 12:58:05 Msec=1500 True Az=112.995 Ze=-123.195 Az status=0008 Ze status=0009 12:58:05 Check angles 12:58:05 SkyScan query 12:58:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.15<-21610 Statuses=0008 0009 12:58:05 Msec=2250 True Az=112.995 Ze=-144.15 Az status=0008 Ze status=0009 12:58:05 Check angles 12:58:05 SkyScan query 12:58:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.09<-23006 Statuses=0008 0009 12:58:06 Msec=3000 True Az=112.995 Ze=-165.09 Az status=0008 Ze status=0009 12:58:06 Check angles 12:58:06 SkyScan query 12:58:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 12:58:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 12:58:07 Message to Master queued w/err=0: serial=10662 error=0 12:58:12 Received message from Master: op=Filter serial=10663 12:58:12 Color wheel filter change from 0 to 0 12:58:12 FLIGetFilterPos err=0 currentPosition=0 12:58:12 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:12 Filter is already there-color wheel unchanged 12:58:12 Received message from Master: op=Shutter serial=10664 12:58:12 Shutter LASER open 12:58:12 Received message from Camera: op=State serial=10666 12:58:12 GetSingleValue result=40 Value=cccccccc 12:58:12 SkyScan query 12:58:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 12:58:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:13 Parameters OK 12:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:13 Set A/D data flow result=40 12:58:13 Set A/D channel type result=40 12:58:13 Set A/D encoding result=40 12:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:13 Set channel filter=0.000000e+000 result=40 12:58:13 Config A/D Result=40 12:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:13 Get A/D filter: -9.255963e+061 result=40 12:58:13 Get A/D value=-858993460 result=40 12:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:13 Parameters OK 12:58:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:13 Set A/D data flow result=40 12:58:13 Set A/D channel type result=40 12:58:13 Set A/D encoding result=40 12:58:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:13 Set channel filter=0.000000e+000 result=40 12:58:13 Config A/D Result=40 12:58:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:13 Get A/D filter: -9.255963e+061 result=40 12:58:13 Get A/D value=-858993460 result=40 12:58:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:13 Aux= 12:58:13 Message to Camera, serial 10666 queued 12:58:15 Received message from Master: op=Shutter serial=10670 12:58:15 Shutter LASER close 12:58:16 Received message from Master: op=PointingHead serial=10674 12:58:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 12:58:16 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 12:58:16 Point started: ret=0 12:58:16 point_skyscan result=0 12:58:17 Check angles 12:58:17 SkyScan query 12:58:17 SkyScan query done: ret=0 az=89.55<-5970 ze=156.78<-1548 Statuses=0009 0009 12:58:17 Msec=0 True Az=89.55 Ze=156.78 Az status=0009 Ze status=0009 12:58:18 Check angles 12:58:18 SkyScan query 12:58:18 SkyScan query done: ret=0 az=72.06<-4804 ze=135.795<-2947 Statuses=0009 0009 12:58:18 Msec=750 True Az=72.06 Ze=135.795 Az status=0009 Ze status=0009 12:58:18 Check angles 12:58:18 SkyScan query 12:58:19 SkyScan query done: ret=0 az=54.465<-3631 ze=114.435<-4371 Statuses=0009 0009 12:58:19 Msec=1500 True Az=54.465 Ze=114.435 Az status=0009 Ze status=0009 12:58:19 Check angles 12:58:19 SkyScan query 12:58:20 SkyScan query done: ret=0 az=40.935<-2729 ze=93.465<-5769 Statuses=0009 0009 12:58:20 Msec=2250 True Az=40.935 Ze=93.465 Az status=0009 Ze status=0009 12:58:20 Check angles 12:58:20 SkyScan query 12:58:20 SkyScan query done: ret=0 az=40.995<-2733 ze=72.495<-7167 Statuses=0008 0009 12:58:20 Msec=3000 True Az=40.995 Ze=72.495 Az status=0008 Ze status=0009 12:58:21 Check angles 12:58:21 SkyScan query 12:58:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.095<-8527 Statuses=0008 0009 12:58:21 Msec=3750 True Az=40.995 Ze=52.095 Az status=0008 Ze status=0009 12:58:21 Check angles 12:58:21 SkyScan query 12:58:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 12:58:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 12:58:22 Message to Master queued w/err=0: serial=10674 error=0 12:58:27 Received message from Master: op=Filter serial=10675 12:58:27 Color wheel filter change from 0 to 0 12:58:27 FLIGetFilterPos err=0 currentPosition=0 12:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 12:58:27 Filter is already there-color wheel unchanged 12:58:27 Received message from Master: op=Shutter serial=10676 12:58:27 Shutter LASER close 12:58:27 Received message from Camera: op=State serial=10678 12:58:27 GetSingleValue result=40 Value=cccccccc 12:58:27 SkyScan query 12:58:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 12:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:28 Parameters OK 12:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:28 Set A/D data flow result=40 12:58:28 Set A/D channel type result=40 12:58:28 Set A/D encoding result=40 12:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:28 Set channel filter=0.000000e+000 result=40 12:58:28 Config A/D Result=40 12:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:28 Get A/D filter: -9.255963e+061 result=40 12:58:28 Get A/D value=-858993460 result=40 12:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:58:28 Parameters OK 12:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:58:28 Set A/D data flow result=40 12:58:28 Set A/D channel type result=40 12:58:28 Set A/D encoding result=40 12:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:58:28 Set channel filter=0.000000e+000 result=40 12:58:28 Config A/D Result=40 12:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:58:28 Get A/D filter: -9.255963e+061 result=40 12:58:28 Get A/D value=-858993460 result=40 12:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:58:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:58:28 Aux= 12:58:28 Message to Camera, serial 10678 queued 12:58:59 Received message from Master: op=PointingHead serial=10685 12:58:59 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 12:58:59 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 12:58:59 Point started: ret=0 12:58:59 point_skyscan result=0 12:59:00 Check angles 12:59:00 SkyScan query 12:59:00 SkyScan query done: ret=0 az=63.99<-4266 ze=66.54<-7564 Statuses=0009 0008 12:59:00 Msec=0 True Az=63.99 Ze=66.54 Az status=0009 Ze status=0008 12:59:01 Check angles 12:59:01 SkyScan query 12:59:01 SkyScan query done: ret=0 az=81.51<-5434 ze=66.51<-7566 Statuses=0009 0008 12:59:01 Msec=750 True Az=81.51 Ze=66.51 Az status=0009 Ze status=0008 12:59:01 Check angles 12:59:01 SkyScan query 12:59:02 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 12:59:02 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 12:59:02 Check angles 12:59:02 SkyScan query 12:59:03 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 12:59:03 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 12:59:03 Check angles 12:59:03 SkyScan query 12:59:03 SkyScan query done: ret=0 az=134.4<-8960 ze=66.495<-7567 Statuses=0009 0008 12:59:03 Msec=3000 True Az=134.4 Ze=66.495 Az status=0009 Ze status=0008 12:59:04 Check angles 12:59:04 SkyScan query 12:59:04 SkyScan query done: ret=0 az=151.68<-10112 ze=66.495<-7567 Statuses=0009 0008 12:59:04 Msec=3750 True Az=151.68 Ze=66.495 Az status=0009 Ze status=0008 12:59:04 Check angles 12:59:04 SkyScan query 12:59:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 12:59:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 12:59:05 Message to Master queued w/err=0: serial=10685 error=0 12:59:10 Received message from Master: op=Filter serial=10686 12:59:10 Color wheel filter change from 0 to 0 12:59:10 FLIGetFilterPos err=0 currentPosition=0 12:59:10 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:10 Filter is already there-color wheel unchanged 12:59:10 Received message from Master: op=Shutter serial=10687 12:59:10 Shutter LASER close 12:59:10 Received message from Camera: op=State serial=10689 12:59:10 GetSingleValue result=40 Value=cccccccc 12:59:10 SkyScan query 12:59:11 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 12:59:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:11 Parameters OK 12:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:11 Set A/D data flow result=40 12:59:11 Set A/D channel type result=40 12:59:11 Set A/D encoding result=40 12:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:11 Set channel filter=0.000000e+000 result=40 12:59:11 Config A/D Result=40 12:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:11 Get A/D filter: -9.255963e+061 result=40 12:59:11 Get A/D value=-858993460 result=40 12:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:11 Parameters OK 12:59:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:11 Set A/D data flow result=40 12:59:11 Set A/D channel type result=40 12:59:11 Set A/D encoding result=40 12:59:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:11 Set channel filter=0.000000e+000 result=40 12:59:11 Config A/D Result=40 12:59:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:11 Get A/D filter: -9.255963e+061 result=40 12:59:11 Get A/D value=-858993460 result=40 12:59:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:11 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:11 Aux= 12:59:11 Message to Camera, serial 10689 queued 12:59:41 Received message from Master: op=PointingHead serial=10696 12:59:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 12:59:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 12:59:42 Point started: ret=0 12:59:42 point_skyscan result=0 12:59:43 Check angles 12:59:43 SkyScan query 12:59:43 SkyScan query done: ret=0 az=135.195<-9013 ze=36.885<-9541 Statuses=0009 0009 12:59:43 Msec=0 True Az=135.195 Ze=36.885 Az status=0009 Ze status=0009 12:59:43 Check angles 12:59:43 SkyScan query 12:59:44 SkyScan query done: ret=0 az=117.675<-7845 ze=15.885<-10941 Statuses=0009 0009 12:59:44 Msec=750 True Az=117.675 Ze=15.885 Az status=0009 Ze status=0009 12:59:44 Check angles 12:59:44 SkyScan query 12:59:45 SkyScan query done: ret=0 az=100.275<-6685 ze=-5.055<-12337 Statuses=0009 0009 12:59:45 Msec=1500 True Az=100.275 Ze=-5.055 Az status=0009 Ze status=0009 12:59:45 Check angles 12:59:45 SkyScan query 12:59:45 SkyScan query done: ret=0 az=82.41<-5494 ze=-26.46<-13764 Statuses=0009 0009 12:59:45 Msec=2250 True Az=82.41 Ze=-26.46 Az status=0009 Ze status=0009 12:59:46 Check angles 12:59:46 SkyScan query 12:59:46 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 12:59:46 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 12:59:46 Check angles 12:59:46 SkyScan query 12:59:47 SkyScan query done: ret=0 az=47.37<-3158 ze=-38.535<-14569 Statuses=0009 0008 12:59:47 Msec=3750 True Az=47.37 Ze=-38.535 Az status=0009 Ze status=0008 12:59:47 Check angles 12:59:47 SkyScan query 12:59:48 SkyScan query done: ret=0 az=41.01<-2734 ze=-38.505<-14567 Statuses=0008 0008 12:59:48 Msec=4500 True Az=41.01 Ze=-38.505 Az status=0008 Ze status=0008 12:59:48 Message to Master queued w/err=0: serial=10696 error=0 12:59:53 Received message from Master: op=Filter serial=10697 12:59:53 Color wheel filter change from 0 to 0 12:59:53 FLIGetFilterPos err=0 currentPosition=0 12:59:53 FLIGetStepsRemaining err=0 RemainingSteps=0 12:59:53 Filter is already there-color wheel unchanged 12:59:53 Received message from Master: op=Shutter serial=10698 12:59:53 Shutter LASER close 12:59:53 Received message from Camera: op=State serial=10700 12:59:53 GetSingleValue result=40 Value=cccccccc 12:59:53 SkyScan query 12:59:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 12:59:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:53 Parameters OK 12:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:53 Set A/D data flow result=40 12:59:53 Set A/D channel type result=40 12:59:53 Set A/D encoding result=40 12:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:53 Set channel filter=0.000000e+000 result=40 12:59:53 Config A/D Result=40 12:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:53 Get A/D filter: -9.255963e+061 result=40 12:59:53 Get A/D value=-858993460 result=40 12:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 12:59:53 Parameters OK 12:59:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 12:59:53 Set A/D data flow result=40 12:59:53 Set A/D channel type result=40 12:59:53 Set A/D encoding result=40 12:59:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 12:59:53 Set channel filter=0.000000e+000 result=40 12:59:53 Config A/D Result=40 12:59:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 12:59:53 Get A/D filter: -9.255963e+061 result=40 12:59:53 Get A/D value=-858993460 result=40 12:59:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 12:59:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 12:59:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 12:59:53 Aux= 12:59:53 Message to Camera, serial 10700 queued 13:00:24 Received message from Master: op=PointingHead serial=10707 13:00:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:00:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:00:25 Point started: ret=0 13:00:25 point_skyscan result=0 13:00:25 Check angles 13:00:25 SkyScan query 13:00:26 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.355<-16557 Statuses=0009 0009 13:00:26 Msec=0 True Az=63.945 Ze=-68.355 Az status=0009 Ze status=0009 13:00:26 Check angles 13:00:26 SkyScan query 13:00:27 SkyScan query done: ret=0 az=81.99<-5466 ze=-89.73<-17982 Statuses=0009 0009 13:00:27 Msec=750 True Az=81.99 Ze=-89.73 Az status=0009 Ze status=0009 13:00:27 Check angles 13:00:27 SkyScan query 13:00:28 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.685<-19379 Statuses=0009 0009 13:00:28 Msec=1500 True Az=99.45 Ze=-110.685 Az status=0009 Ze status=0009 13:00:28 Check angles 13:00:28 SkyScan query 13:00:28 SkyScan query done: ret=0 az=116.865<-7791 ze=-131.64<-20776 Statuses=0009 0009 13:00:28 Msec=2250 True Az=116.865 Ze=-131.64 Az status=0009 Ze status=0009 13:00:28 Check angles 13:00:28 SkyScan query 13:00:29 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.525<-21435 Statuses=0009 0008 13:00:29 Msec=3000 True Az=131.1 Ze=-141.525 Az status=0009 Ze status=0008 13:00:29 Check angles 13:00:29 SkyScan query 13:00:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:00:30 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:00:30 Message to Master queued w/err=0: serial=10707 error=0 13:00:35 Received message from Master: op=Filter serial=10708 13:00:35 Color wheel filter change from 0 to 0 13:00:35 FLIGetFilterPos err=0 currentPosition=0 13:00:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:00:35 Filter is already there-color wheel unchanged 13:00:35 Received message from Master: op=Shutter serial=10709 13:00:35 Shutter LASER close 13:00:35 Received message from Camera: op=State serial=10711 13:00:35 GetSingleValue result=40 Value=cccccccc 13:00:35 SkyScan query 13:00:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:00:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:36 Parameters OK 13:00:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:36 Set A/D data flow result=40 13:00:36 Set A/D channel type result=40 13:00:36 Set A/D encoding result=40 13:00:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:36 Set channel filter=0.000000e+000 result=40 13:00:36 Config A/D Result=40 13:00:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:36 Get A/D filter: -9.255963e+061 result=40 13:00:36 Get A/D value=-858993460 result=40 13:00:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:00:36 Parameters OK 13:00:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:00:36 Set A/D data flow result=40 13:00:36 Set A/D channel type result=40 13:00:36 Set A/D encoding result=40 13:00:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:00:36 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-4 13:00:36] 13:00:36 Config A/D Result=40 13:00:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:00:36 Get A/D filter: -9.255963e+061 result=40 13:00:36 Get A/D value=-858993460 result=40 13:00:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:00:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:00:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:00:36 Aux= 13:00:36 Message to Camera, serial 10711 queued 13:01:06 Received message from Master: op=PointingHead serial=10718 13:01:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:01:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:01:07 Point started: ret=0 13:01:07 point_skyscan result=0 13:01:08 Check angles 13:01:08 SkyScan query 13:01:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 13:01:08 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 13:01:08 Check angles 13:01:08 SkyScan query 13:01:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:01:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:01:09 Message to Master queued w/err=0: serial=10718 error=0 13:01:14 Received message from Master: op=Filter serial=10719 13:01:14 Color wheel filter change from 0 to 0 13:01:14 FLIGetFilterPos err=0 currentPosition=0 13:01:14 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:14 Filter is already there-color wheel unchanged 13:01:14 Received message from Master: op=Shutter serial=10720 13:01:14 Shutter LASER open 13:01:14 Received message from Camera: op=State serial=10722 13:01:14 GetSingleValue result=40 Value=cccccccc 13:01:14 SkyScan query 13:01:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:01:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:15 Parameters OK 13:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:15 Set A/D data flow result=40 13:01:15 Set A/D channel type result=40 13:01:15 Set A/D encoding result=40 13:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:15 Set channel filter=0.000000e+000 result=40 13:01:15 Config A/D Result=40 13:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:15 Get A/D filter: -9.255963e+061 result=40 13:01:15 Get A/D value=-858993460 result=40 13:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:15 Parameters OK 13:01:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:15 Set A/D data flow result=40 13:01:15 Set A/D channel type result=40 13:01:15 Set A/D encoding result=40 13:01:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:15 Set channel filter=0.000000e+000 result=40 13:01:15 Config A/D Result=40 13:01:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:15 Get A/D filter: -9.255963e+061 result=40 13:01:15 Get A/D value=-858993460 result=40 13:01:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:15 Aux= 13:01:15 Message to Camera, serial 10722 queued 13:01:17 Received message from Master: op=Shutter serial=10726 13:01:17 Shutter LASER close 13:01:18 Received message from Master: op=PointingHead serial=10730 13:01:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:01:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:01:18 Point started: ret=0 13:01:18 point_skyscan result=0 13:01:19 Check angles 13:01:19 SkyScan query 13:01:19 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 13:01:19 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 13:01:20 Check angles 13:01:20 SkyScan query 13:01:20 SkyScan query done: ret=0 az=153.165<-10211 ze=-122.58<-20172 Statuses=0009 0009 13:01:20 Msec=750 True Az=153.165 Ze=-122.58 Az status=0009 Ze status=0009 13:01:20 Check angles 13:01:20 SkyScan query 13:01:21 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.205<-18747 Statuses=0009 0009 13:01:21 Msec=1500 True Az=170.955 Ze=-101.205 Az status=0009 Ze status=0009 13:01:21 Check angles 13:01:21 SkyScan query 13:01:22 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 13:01:22 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 13:01:22 Check angles 13:01:22 SkyScan query 13:01:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.845<-15923 Statuses=0008 0009 13:01:23 Msec=3000 True Az=175.995 Ze=-58.845 Az status=0008 Ze status=0009 13:01:23 Check angles 13:01:23 SkyScan query 13:01:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:01:23 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:01:23 Message to Master queued w/err=0: serial=10730 error=0 13:01:28 Received message from Master: op=Filter serial=10731 13:01:28 Color wheel filter change from 0 to 0 13:01:28 FLIGetFilterPos err=0 currentPosition=0 13:01:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:01:28 Filter is already there-color wheel unchanged 13:01:28 Received message from Master: op=Shutter serial=10732 13:01:28 Shutter LASER close 13:01:29 Received message from Camera: op=State serial=10734 13:01:29 GetSingleValue result=40 Value=cccccccc 13:01:29 SkyScan query 13:01:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:01:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:29 Parameters OK 13:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:29 Set A/D data flow result=40 13:01:29 Set A/D channel type result=40 13:01:29 Set A/D encoding result=40 13:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:29 Set channel filter=0.000000e+000 result=40 13:01:29 Config A/D Result=40 13:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:29 Get A/D filter: -9.255963e+061 result=40 13:01:29 Get A/D value=-858993460 result=40 13:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:01:29 Parameters OK 13:01:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:01:29 Set A/D data flow result=40 13:01:29 Set A/D channel type result=40 13:01:29 Set A/D encoding result=40 13:01:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:01:29 Set channel filter=0.000000e+000 result=40 13:01:29 Config A/D Result=40 13:01:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:01:29 Get A/D filter: -9.255963e+061 result=40 13:01:29 Get A/D value=-858993460 result=40 13:01:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:01:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:01:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:01:29 Aux= 13:01:29 Message to Camera, serial 10734 queued 13:02:00 Received message from Master: op=PointingHead serial=10741 13:02:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:02:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:02:00 Point started: ret=0 13:02:00 point_skyscan result=0 13:02:01 Check angles 13:02:01 SkyScan query 13:02:02 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.405<-13427 Statuses=0009 0009 13:02:02 Msec=0 True Az=152.655 Ze=-21.405 Az status=0009 Ze status=0009 13:02:02 Check angles 13:02:02 SkyScan query 13:02:02 SkyScan query done: ret=0 az=134.655<-8977 ze=-0.03<-12002 Statuses=0009 0009 13:02:02 Msec=750 True Az=134.655 Ze=-0.03 Az status=0009 Ze status=0009 13:02:03 Check angles 13:02:03 SkyScan query 13:02:03 SkyScan query done: ret=0 az=117.255<-7817 ze=20.94<-10604 Statuses=0009 0009 13:02:03 Msec=1500 True Az=117.255 Ze=20.94 Az status=0009 Ze status=0009 13:02:03 Check angles 13:02:03 SkyScan query 13:02:04 SkyScan query done: ret=0 az=99.915<-6661 ze=41.895<-9207 Statuses=0009 0009 13:02:04 Msec=2250 True Az=99.915 Ze=41.895 Az status=0009 Ze status=0009 13:02:04 Check angles 13:02:04 SkyScan query 13:02:05 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:02:05 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:02:05 Check angles 13:02:05 SkyScan query 13:02:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:02:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:02:05 Message to Master queued w/err=0: serial=10741 error=0 13:02:10 Received message from Master: op=Filter serial=10742 13:02:10 Color wheel filter change from 0 to 0 13:02:10 FLIGetFilterPos err=0 currentPosition=0 13:02:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:10 Filter is already there-color wheel unchanged 13:02:11 Received message from Master: op=Shutter serial=10743 13:02:11 Shutter LASER close 13:02:11 Received message from Camera: op=State serial=10745 13:02:11 GetSingleValue result=40 Value=cccccccc 13:02:11 SkyScan query 13:02:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:02:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:11 Parameters OK 13:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:11 Set A/D data flow result=40 13:02:11 Set A/D channel type result=40 13:02:11 Set A/D encoding result=40 13:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:11 Set channel filter=0.000000e+000 result=40 13:02:11 Config A/D Result=40 13:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:11 Get A/D filter: -9.255963e+061 result=40 13:02:11 Get A/D value=-858993460 result=40 13:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:11 Parameters OK 13:02:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:11 Set A/D data flow result=40 13:02:11 Set A/D channel type result=40 13:02:11 Set A/D encoding result=40 13:02:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:11 Set channel filter=0.000000e+000 result=40 13:02:11 Config A/D Result=40 13:02:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:11 Get A/D filter: -9.255963e+061 result=40 13:02:11 Get A/D value=-858993460 result=40 13:02:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:11 Aux= 13:02:11 Message to Camera, serial 10745 queued 13:02:42 Received message from Master: op=PointingHead serial=10752 13:02:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:02:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:02:42 Point started: ret=0 13:02:42 point_skyscan result=0 13:02:43 Check angles 13:02:43 SkyScan query 13:02:44 SkyScan query done: ret=0 az=108.855<-7257 ze=38.475<-9435 Statuses=0009 0008 13:02:44 Msec=0 True Az=108.855 Ze=38.475 Az status=0009 Ze status=0008 13:02:44 Check angles 13:02:44 SkyScan query 13:02:45 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 13:02:45 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 13:02:45 Check angles 13:02:45 SkyScan query 13:02:45 SkyScan query done: ret=0 az=143.865<-9591 ze=38.505<-9433 Statuses=0009 0008 13:02:45 Msec=1500 True Az=143.865 Ze=38.505 Az status=0009 Ze status=0008 13:02:45 Check angles 13:02:45 SkyScan query 13:02:46 SkyScan query done: ret=0 az=161.265<-10751 ze=38.505<-9433 Statuses=0009 0008 13:02:46 Msec=2250 True Az=161.265 Ze=38.505 Az status=0009 Ze status=0008 13:02:46 Check angles 13:02:46 SkyScan query 13:02:47 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 13:02:47 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 13:02:47 Check angles 13:02:47 SkyScan query 13:02:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:02:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:02:48 Message to Master queued w/err=0: serial=10752 error=0 13:02:53 Received message from Master: op=Filter serial=10753 13:02:53 Color wheel filter change from 0 to 0 13:02:53 FLIGetFilterPos err=0 currentPosition=0 13:02:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:02:53 Filter is already there-color wheel unchanged 13:02:53 Received message from Master: op=Shutter serial=10754 13:02:53 Shutter LASER close 13:02:53 Received message from Camera: op=State serial=10756 13:02:53 GetSingleValue result=40 Value=cccccccc 13:02:53 SkyScan query 13:02:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:02:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:53 Parameters OK 13:02:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:53 Set A/D data flow result=40 13:02:53 Set A/D channel type result=40 13:02:53 Set A/D encoding result=40 13:02:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:53 Set channel filter=0.000000e+000 result=40 13:02:53 Config A/D Result=40 13:02:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:53 Get A/D filter: -9.255963e+061 result=40 13:02:53 Get A/D value=-858993460 result=40 13:02:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:02:53 Parameters OK 13:02:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:02:53 Set A/D data flow result=40 13:02:53 Set A/D channel type result=40 13:02:53 Set A/D encoding result=40 13:02:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:02:53 Set channel filter=0.000000e+000 result=40 13:02:53 Config A/D Result=40 13:02:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:02:53 Get A/D filter: -9.255963e+061 result=40 13:02:53 Get A/D value=-858993460 result=40 13:02:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:02:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:02:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:02:53 Aux= 13:02:53 Message to Camera, serial 10756 queued 13:03:24 Received message from Master: op=PointingHead serial=10763 13:03:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:03:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:03:25 Point started: ret=0 13:03:25 point_skyscan result=0 13:03:25 Check angles 13:03:25 SkyScan query 13:03:26 SkyScan query done: ret=0 az=152.925<-10195 ze=8.61<-11426 Statuses=0009 0009 13:03:26 Msec=0 True Az=152.925 Ze=8.61 Az status=0009 Ze status=0009 13:03:26 Check angles 13:03:26 SkyScan query 13:03:27 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.33<-12822 Statuses=0009 0009 13:03:27 Msec=750 True Az=135.42 Ze=-12.33 Az status=0009 Ze status=0009 13:03:27 Check angles 13:03:27 SkyScan query 13:03:27 SkyScan query done: ret=0 az=117.93<-7862 ze=-33.27<-14218 Statuses=0009 0009 13:03:27 Msec=1500 True Az=117.93 Ze=-33.27 Az status=0009 Ze status=0009 13:03:28 Check angles 13:03:28 SkyScan query 13:03:28 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 13:03:28 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 13:03:28 Check angles 13:03:28 SkyScan query 13:03:29 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:03:29 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:03:29 Check angles 13:03:29 SkyScan query 13:03:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:03:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:03:30 Message to Master queued w/err=0: serial=10763 error=0 13:03:35 Received message from Master: op=Filter serial=10764 13:03:35 Color wheel filter change from 0 to 0 13:03:35 FLIGetFilterPos err=0 currentPosition=0 13:03:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:03:35 Filter is already there-color wheel unchanged 13:03:35 Received message from Master: op=Shutter serial=10765 13:03:35 Shutter LASER close 13:03:35 Received message from Camera: op=State serial=10767 13:03:35 GetSingleValue result=40 Value=cccccccc 13:03:35 SkyScan query 13:03:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:03:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:35 Parameters OK 13:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:35 Set A/D data flow result=40 13:03:35 Set A/D channel type result=40 13:03:35 Set A/D encoding result=40 13:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:35 Set channel filter=0.000000e+000 result=40 13:03:35 Config A/D Result=40 13:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:35 Get A/D filter: -9.255963e+061 result=40 13:03:35 Get A/D value=-858993460 result=40 13:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:03:35 Parameters OK 13:03:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:03:35 Set A/D data flow result=40 13:03:35 Set A/D channel type result=40 13:03:35 Set A/D encoding result=40 13:03:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:03:35 Set channel filter=0.000000e+000 result=40 13:03:35 Config A/D Result=40 13:03:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:03:35 Get A/D filter: -9.255963e+061 result=40 13:03:35 Get A/D value=-858993460 result=40 13:03:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:03:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:03:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:03:35 Aux= 13:03:35 Message to Camera, serial 10767 queued 13:04:06 Received message from Master: op=PointingHead serial=10774 13:04:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:04:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:04:07 Point started: ret=0 13:04:07 point_skyscan result=0 13:04:07 Check angles 13:04:07 SkyScan query 13:04:08 SkyScan query done: ret=0 az=109.275<-7285 ze=-81.555<-17437 Statuses=0009 0009 13:04:08 Msec=0 True Az=109.275 Ze=-81.555 Az status=0009 Ze status=0009 13:04:08 Check angles 13:04:08 SkyScan query 13:04:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 13:04:09 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 13:04:09 Check angles 13:04:09 SkyScan query 13:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 13:04:10 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 13:04:10 Check angles 13:04:10 SkyScan query 13:04:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.825<-21655 Statuses=0008 0009 13:04:10 Msec=2250 True Az=112.995 Ze=-144.825 Az status=0008 Ze status=0009 13:04:10 Check angles 13:04:10 SkyScan query 13:04:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 13:04:11 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 13:04:11 Check angles 13:04:11 SkyScan query 13:04:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:04:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:04:12 Message to Master queued w/err=0: serial=10774 error=0 13:04:17 Received message from Master: op=Filter serial=10775 13:04:17 Color wheel filter change from 0 to 0 13:04:17 FLIGetFilterPos err=0 currentPosition=0 13:04:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:17 Filter is already there-color wheel unchanged 13:04:17 Received message from Master: op=Shutter serial=10776 13:04:17 Shutter LASER open 13:04:17 Received message from Camera: op=State serial=10778 13:04:17 GetSingleValue result=40 Value=cccccccc 13:04:17 SkyScan query 13:04:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:04:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:18 Parameters OK 13:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:18 Set A/D data flow result=40 13:04:18 Set A/D channel type result=40 13:04:18 Set A/D encoding result=40 13:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:18 Set channel filter=0.000000e+000 result=40 13:04:18 Config A/D Result=40 13:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:18 Get A/D filter: -9.255963e+061 result=40 13:04:18 Get A/D value=-858993460 result=40 13:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:18 Parameters OK 13:04:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:18 Set A/D data flow result=40 13:04:18 Set A/D channel type result=40 13:04:18 Set A/D encoding result=40 13:04:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:18 Set channel filter=0.000000e+000 result=40 13:04:18 Config A/D Result=40 13:04:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:18 Get A/D filter: -9.255963e+061 result=40 13:04:18 Get A/D value=-858993460 result=40 13:04:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:18 Aux= 13:04:18 Message to Camera, serial 10778 queued 13:04:20 Received message from Master: op=Shutter serial=10782 13:04:20 Shutter LASER close 13:04:21 Received message from Master: op=PointingHead serial=10786 13:04:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:04:21 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:04:21 Point started: ret=0 13:04:21 point_skyscan result=0 13:04:22 Check angles 13:04:22 SkyScan query 13:04:22 SkyScan query done: ret=0 az=89.475<-5965 ze=156.78<-1548 Statuses=0009 0009 13:04:22 Msec=0 True Az=89.475 Ze=156.78 Az status=0009 Ze status=0009 13:04:22 Check angles 13:04:22 SkyScan query 13:04:23 SkyScan query done: ret=0 az=71.565<-4771 ze=135.375<-2975 Statuses=0009 0009 13:04:23 Msec=750 True Az=71.565 Ze=135.375 Az status=0009 Ze status=0009 13:04:23 Check angles 13:04:23 SkyScan query 13:04:24 SkyScan query done: ret=0 az=54.405<-3627 ze=114.45<-4370 Statuses=0009 0009 13:04:24 Msec=1500 True Az=54.405 Ze=114.45 Az status=0009 Ze status=0009 13:04:24 Check angles 13:04:24 SkyScan query 13:04:25 SkyScan query done: ret=0 az=40.935<-2729 ze=93.465<-5769 Statuses=0009 0009 13:04:25 Msec=2250 True Az=40.935 Ze=93.465 Az status=0009 Ze status=0009 13:04:25 Check angles 13:04:25 SkyScan query 13:04:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 13:04:25 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 13:04:25 Check angles 13:04:25 SkyScan query 13:04:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 13:04:26 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 13:04:26 Check angles 13:04:26 SkyScan query 13:04:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:04:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:04:27 Message to Master queued w/err=0: serial=10786 error=0 13:04:32 Received message from Master: op=Filter serial=10787 13:04:32 Color wheel filter change from 0 to 0 13:04:32 FLIGetFilterPos err=0 currentPosition=0 13:04:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:04:32 Filter is already there-color wheel unchanged 13:04:32 Received message from Master: op=Shutter serial=10788 13:04:32 Shutter LASER close 13:04:32 Received message from Camera: op=State serial=10790 13:04:32 GetSingleValue result=40 Value=cccccccc 13:04:32 SkyScan query 13:04:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:33 Parameters OK 13:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:33 Set A/D data flow result=40 13:04:33 Set A/D channel type result=40 13:04:33 Set A/D encoding result=40 13:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:33 Set channel filter=0.000000e+000 result=40 13:04:33 Config A/D Result=40 13:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:33 Get A/D filter: -9.255963e+061 result=40 13:04:33 Get A/D value=-858993460 result=40 13:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:04:33 Parameters OK 13:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:04:33 Set A/D data flow result=40 13:04:33 Set A/D channel type result=40 13:04:33 Set A/D encoding result=40 13:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:04:33 Set channel filter=0.000000e+000 result=40 13:04:33 Config A/D Result=40 13:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:04:33 Get A/D filter: -9.255963e+061 result=40 13:04:33 Get A/D value=-858993460 result=40 13:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:04:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:04:33 Aux= 13:04:33 Message to Camera, serial 10790 queued 13:05:04 Received message from Master: op=PointingHead serial=10797 13:05:04 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:05:04 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:05:04 Point started: ret=0 13:05:04 point_skyscan result=0 13:05:05 Check angles 13:05:05 SkyScan query 13:05:05 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 13:05:05 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 13:05:05 Check angles 13:05:05 SkyScan query 13:05:06 SkyScan query done: ret=0 az=82.35<-5490 ze=66.495<-7567 Statuses=0009 0008 13:05:06 Msec=750 True Az=82.35 Ze=66.495 Az status=0009 Ze status=0008 13:05:06 Check angles 13:05:06 SkyScan query 13:05:07 SkyScan query done: ret=0 az=99.81<-6654 ze=66.495<-7567 Statuses=0009 0008 13:05:07 Msec=1500 True Az=99.81 Ze=66.495 Az status=0009 Ze status=0008 13:05:07 Check angles 13:05:07 SkyScan query 13:05:07 SkyScan query done: ret=0 az=117.57<-7838 ze=66.495<-7567 Statuses=0009 0008 13:05:07 Msec=2250 True Az=117.57 Ze=66.495 Az status=0009 Ze status=0008 13:05:08 Check angles 13:05:08 SkyScan query 13:05:08 SkyScan query done: ret=0 az=135.105<-9007 ze=66.495<-7567 Statuses=0009 0008 13:05:08 Msec=3000 True Az=135.105 Ze=66.495 Az status=0009 Ze status=0008 13:05:08 Check angles 13:05:08 SkyScan query 13:05:09 SkyScan query done: ret=0 az=152.415<-10161 ze=66.495<-7567 Statuses=0009 0008 13:05:09 Msec=3750 True Az=152.415 Ze=66.495 Az status=0009 Ze status=0008 13:05:09 Check angles 13:05:09 SkyScan query 13:05:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:05:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:05:10 Message to Master queued w/err=0: serial=10797 error=0 13:05:15 Received message from Master: op=Filter serial=10798 13:05:15 Color wheel filter change from 0 to 0 13:05:15 FLIGetFilterPos err=0 currentPosition=0 13:05:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:15 Filter is already there-color wheel unchanged 13:05:15 Received message from Master: op=Shutter serial=10799 13:05:15 Shutter LASER close 13:05:15 Received message from Camera: op=State serial=10801 13:05:15 GetSingleValue result=40 Value=cccccccc 13:05:15 SkyScan query 13:05:16 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:05:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:16 Parameters OK 13:05:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:16 Set A/D data flow result=40 13:05:16 Set A/D channel type result=40 13:05:16 Set A/D encoding result=40 13:05:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:16 Set channel filter=0.000000e+000 result=40 13:05:16 Config A/D Result=40 13:05:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:16 Get A/D filter: -9.255963e+061 result=40 13:05:16 Get A/D value=-858993460 result=40 13:05:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:16 Parameters OK 13:05:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:16 Set A/D data flow result=40 13:05:16 Set A/D channel type result=40 13:05:16 Set A/D encoding result=40 13:05:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:16 Set channel filter=0.000000e+000 result=40 13:05:16 Config A/D Result=40 13:05:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:16 Get A/D filter: -9.255963e+061 result=40 13:05:16 Get A/D value=-858993460 result=40 13:05:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:16 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:16 Aux= 13:05:16 Message to Camera, serial 10801 queued 13:05:46 Received message from Master: op=PointingHead serial=10808 13:05:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:05:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:05:47 Point started: ret=0 13:05:47 point_skyscan result=0 13:05:48 Check angles 13:05:48 SkyScan query 13:05:48 SkyScan query done: ret=0 az=134.745<-8983 ze=36.33<-9578 Statuses=0009 0009 13:05:48 Msec=0 True Az=134.745 Ze=36.33 Az status=0009 Ze status=0009 13:05:48 Check angles 13:05:48 SkyScan query 13:05:49 SkyScan query done: ret=0 az=117.09<-7806 ze=15.39<-10974 Statuses=0009 0009 13:05:49 Msec=750 True Az=117.09 Ze=15.39 Az status=0009 Ze status=0009 13:05:49 Check angles 13:05:49 SkyScan query 13:05:50 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.58<-12372 Statuses=0009 0009 13:05:50 Msec=1500 True Az=99.855 Ze=-5.58 Az status=0009 Ze status=0009 13:05:50 Check angles 13:05:50 SkyScan query 13:05:50 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.565<-13771 Statuses=0009 0009 13:05:50 Msec=2250 True Az=82.245 Ze=-26.565 Az status=0009 Ze status=0009 13:05:51 Check angles 13:05:51 SkyScan query 13:05:51 SkyScan query done: ret=0 az=64.8<-4320 ze=-38.55<-14570 Statuses=0009 0008 13:05:51 Msec=3000 True Az=64.8 Ze=-38.55 Az status=0009 Ze status=0008 13:05:51 Check angles 13:05:51 SkyScan query 13:05:52 SkyScan query done: ret=0 az=47.355<-3157 ze=-38.535<-14569 Statuses=0009 0008 13:05:52 Msec=3750 True Az=47.355 Ze=-38.535 Az status=0009 Ze status=0008 13:05:52 Check angles 13:05:52 SkyScan query 13:05:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:05:53 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:05:53 Message to Master queued w/err=0: serial=10808 error=0 13:05:58 Received message from Master: op=Filter serial=10809 13:05:58 Color wheel filter change from 0 to 0 13:05:58 FLIGetFilterPos err=0 currentPosition=0 13:05:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:05:58 Filter is already there-color wheel unchanged 13:05:58 Received message from Master: op=Shutter serial=10810 13:05:58 Shutter LASER close 13:05:58 Received message from Camera: op=State serial=10812 13:05:58 GetSingleValue result=40 Value=cccccccc 13:05:58 SkyScan query 13:05:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:05:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:58 Parameters OK 13:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:58 Set A/D data flow result=40 13:05:58 Set A/D channel type result=40 13:05:58 Set A/D encoding result=40 13:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:58 Set channel filter=0.000000e+000 result=40 13:05:58 Config A/D Result=40 13:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:58 Get A/D filter: -9.255963e+061 result=40 13:05:58 Get A/D value=-858993460 result=40 13:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:05:58 Parameters OK 13:05:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:05:58 Set A/D data flow result=40 13:05:58 Set A/D channel type result=40 13:05:58 Set A/D encoding result=40 13:05:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:05:58 Set channel filter=0.000000e+000 result=40 13:05:58 Config A/D Result=40 13:05:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:05:58 Get A/D filter: -9.255963e+061 result=40 13:05:58 Get A/D value=-858993460 result=40 13:05:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:05:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:05:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:05:58 Aux= 13:05:58 Message to Camera, serial 10812 queued 13:06:29 Received message from Master: op=PointingHead serial=10819 13:06:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:06:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:06:30 Point started: ret=0 13:06:30 point_skyscan result=0 13:06:30 Check angles 13:06:30 SkyScan query 13:06:31 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.055<-16537 Statuses=0009 0009 13:06:31 Msec=0 True Az=63.795 Ze=-68.055 Az status=0009 Ze status=0009 13:06:31 Check angles 13:06:31 SkyScan query 13:06:32 SkyScan query done: ret=0 az=81.675<-5445 ze=-89.46<-17964 Statuses=0009 0009 13:06:32 Msec=750 True Az=81.675 Ze=-89.46 Az status=0009 Ze status=0009 13:06:32 Check angles 13:06:32 SkyScan query 13:06:32 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.4<-19360 Statuses=0009 0009 13:06:32 Msec=1500 True Az=99.27 Ze=-110.4 Az status=0009 Ze status=0009 13:06:33 Check angles 13:06:33 SkyScan query 13:06:33 SkyScan query done: ret=0 az=116.64<-7776 ze=-131.34<-20756 Statuses=0009 0009 13:06:33 Msec=2250 True Az=116.64 Ze=-131.34 Az status=0009 Ze status=0009 13:06:33 Check angles 13:06:33 SkyScan query 13:06:34 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 13:06:34 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 13:06:34 Check angles 13:06:34 SkyScan query 13:06:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:06:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:06:35 Message to Master queued w/err=0: serial=10819 error=0 13:06:40 Received message from Master: op=Filter serial=10820 13:06:40 Color wheel filter change from 0 to 0 13:06:40 FLIGetFilterPos err=0 currentPosition=0 13:06:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:06:40 Filter is already there-color wheel unchanged 13:06:40 Received message from Master: op=Shutter serial=10821 13:06:40 Shutter LASER close 13:06:40 Received message from Camera: op=State serial=10823 13:06:40 GetSingleValue result=40 Value=cccccccc 13:06:40 SkyScan query 13:06:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:06:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:40 Parameters OK 13:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:40 Set A/D data flow result=40 13:06:40 Set A/D channel type result=40 13:06:40 Set A/D encoding result=40 13:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:40 Set channel filter=0.000000e+000 result=40 13:06:40 Config A/D Result=40 13:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:40 Get A/D filter: -9.255963e+061 result=40 13:06:40 Get A/D value=-858993460 result=40 13:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:06:40 Parameters OK 13:06:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:06:40 Set A/D data flow result=40 13:06:40 Set A/D channel type result=40 13:06:40 Set A/D encoding result=40 13:06:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:06:40 Set channel filter=0.000000e+000 result=40 13:06:40 Config A/D Result=40 13:06:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:06:40 Get A/D filter: -9.255963e+061 result=40 13:06:40 Get A/D value=-858993460 result=40 13:06:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:06:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:06:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:06:40 Aux= 13:06:40 Message to Camera, serial 10823 queued 13:07:11 Received message from Master: op=PointingHead serial=10830 13:07:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:07:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:07:12 Point started: ret=0 13:07:12 point_skyscan result=0 13:07:12 Check angles 13:07:12 SkyScan query 13:07:13 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.21<-23414 Statuses=0009 0009 13:07:13 Msec=0 True Az=113.025 Ze=-171.21 Az status=0009 Ze status=0009 13:07:13 Check angles 13:07:13 SkyScan query 13:07:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:07:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:07:14 Message to Master queued w/err=0: serial=10830 error=0 13:07:19 Received message from Master: op=Filter serial=10831 13:07:19 Color wheel filter change from 0 to 0 13:07:19 FLIGetFilterPos err=0 currentPosition=0 13:07:19 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:19 Filter is already there-color wheel unchanged 13:07:19 Received message from Master: op=Shutter serial=10832 13:07:19 Shutter LASER open 13:07:19 Received message from Camera: op=State serial=10834 13:07:19 GetSingleValue result=40 Value=cccccccc 13:07:19 SkyScan query 13:07:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:07:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:20 Parameters OK 13:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:20 Set A/D data flow result=40 13:07:20 Set A/D channel type result=40 13:07:20 Set A/D encoding result=40 13:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:20 Set channel filter=0.000000e+000 result=40 13:07:20 Config A/D Result=40 13:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:20 Get A/D filter: -9.255963e+061 result=40 13:07:20 Get A/D value=-858993460 result=40 13:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:20 Parameters OK 13:07:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:20 Set A/D data flow result=40 13:07:20 Set A/D channel type result=40 13:07:20 Set A/D encoding result=40 13:07:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:20 Set channel filter=0.000000e+000 result=40 13:07:20 Config A/D Result=40 13:07:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:20 Get A/D filter: -9.255963e+061 result=40 13:07:20 Get A/D value=-858993460 result=40 13:07:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:20 Aux= 13:07:20 Message to Camera, serial 10834 queued 13:07:22 Received message from Master: op=Shutter serial=10838 13:07:22 Shutter LASER close 13:07:23 Received message from Master: op=PointingHead serial=10842 13:07:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:07:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:07:23 Point started: ret=0 13:07:23 point_skyscan result=0 13:07:24 Check angles 13:07:24 SkyScan query 13:07:24 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.505<-21567 Statuses=0009 0009 13:07:24 Msec=0 True Az=135.735 Ze=-143.505 Az status=0009 Ze status=0009 13:07:25 Check angles 13:07:25 SkyScan query 13:07:25 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.565<-20171 Statuses=0009 0009 13:07:25 Msec=750 True Az=153.225 Ze=-122.565 Az status=0009 Ze status=0009 13:07:25 Check angles 13:07:25 SkyScan query 13:07:26 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.595<-18773 Statuses=0009 0009 13:07:26 Msec=1500 True Az=170.715 Ze=-101.595 Az status=0009 Ze status=0009 13:07:26 Check angles 13:07:26 SkyScan query 13:07:27 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.235<-17349 Statuses=0008 0009 13:07:27 Msec=2250 True Az=176.025 Ze=-80.235 Az status=0008 Ze status=0009 13:07:27 Check angles 13:07:27 SkyScan query 13:07:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 13:07:27 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 13:07:28 Check angles 13:07:28 SkyScan query 13:07:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:07:28 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:07:28 Message to Master queued w/err=0: serial=10842 error=0 13:07:33 Received message from Master: op=Filter serial=10843 13:07:33 Color wheel filter change from 0 to 0 13:07:33 FLIGetFilterPos err=0 currentPosition=0 13:07:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:07:33 Filter is already there-color wheel unchanged 13:07:33 Received message from Master: op=Shutter serial=10844 13:07:33 Shutter LASER close 13:07:33 Received message from Camera: op=State serial=10846 13:07:33 GetSingleValue result=40 Value=cccccccc 13:07:33 SkyScan query 13:07:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:07:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:34 Parameters OK 13:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:34 Set A/D data flow result=40 13:07:34 Set A/D channel type result=40 13:07:34 Set A/D encoding result=40 13:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:34 Set channel filter=0.000000e+000 result=40 13:07:34 Config A/D Result=40 13:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:34 Get A/D filter: -9.255963e+061 result=40 13:07:34 Get A/D value=-858993460 result=40 13:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:07:34 Parameters OK 13:07:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:07:34 Set A/D data flow result=40 13:07:34 Set A/D channel type result=40 13:07:34 Set A/D encoding result=40 13:07:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:07:34 Set channel filter=0.000000e+000 result=40 13:07:34 Config A/D Result=40 13:07:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:07:34 Get A/D filter: -9.255963e+061 result=40 13:07:34 Get A/D value=-858993460 result=40 13:07:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:07:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:07:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:07:34 Aux= 13:07:34 Message to Camera, serial 10846 queued 13:08:05 Received message from Master: op=PointingHead serial=10853 13:08:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:08:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:08:05 Point started: ret=0 13:08:05 point_skyscan result=0 13:08:06 Check angles 13:08:06 SkyScan query 13:08:07 SkyScan query done: ret=0 az=153<-10200 ze=-21.945<-13463 Statuses=0009 0009 13:08:07 Msec=0 True Az=153 Ze=-21.945 Az status=0009 Ze status=0009 13:08:07 Check angles 13:08:07 SkyScan query 13:08:07 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.51<-12034 Statuses=0009 0009 13:08:07 Msec=750 True Az=135.165 Ze=-0.51 Az status=0009 Ze status=0009 13:08:08 Check angles 13:08:08 SkyScan query 13:08:08 SkyScan query done: ret=0 az=117.3<-7820 ze=20.835<-10611 Statuses=0009 0009 13:08:08 Msec=1500 True Az=117.3 Ze=20.835 Az status=0009 Ze status=0009 13:08:08 Check angles 13:08:08 SkyScan query 13:08:09 SkyScan query done: ret=0 az=99.87<-6658 ze=41.805<-9213 Statuses=0009 0009 13:08:09 Msec=2250 True Az=99.87 Ze=41.805 Az status=0009 Ze status=0009 13:08:09 Check angles 13:08:09 SkyScan query 13:08:10 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:08:10 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:08:10 Check angles 13:08:10 SkyScan query 13:08:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:08:10 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:08:10 Message to Master queued w/err=0: serial=10853 error=0 13:08:15 Received message from Master: op=Filter serial=10854 13:08:15 Color wheel filter change from 0 to 0 13:08:15 FLIGetFilterPos err=0 currentPosition=0 13:08:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:15 Filter is already there-color wheel unchanged 13:08:16 Received message from Master: op=Shutter serial=10855 13:08:16 Shutter LASER close 13:08:16 Received message from Camera: op=State serial=10857 13:08:16 GetSingleValue result=40 Value=cccccccc 13:08:16 SkyScan query 13:08:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:08:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:16 Parameters OK 13:08:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:16 Set A/D data flow result=40 13:08:16 Set A/D channel type result=40 13:08:16 Set A/D encoding result=40 13:08:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:16 Set channel filter=0.000000e+000 result=40 13:08:16 Config A/D Result=40 13:08:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:16 Get A/D filter: -9.255963e+061 result=40 13:08:16 Get A/D value=-858993460 result=40 13:08:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:16 Parameters OK 13:08:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:16 Set A/D data flow result=40 13:08:16 Set A/D channel type result=40 13:08:16 Set A/D encoding result=40 13:08:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:16 Set channel filter=0.000000e+000 result=40 13:08:16 Config A/D Result=40 13:08:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:16 Get A/D filter: -9.255963e+061 result=40 13:08:16 Get A/D value=-858993460 result=40 13:08:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:16 Aux= 13:08:16 Message to Camera, serial 10857 queued 13:08:47 Received message from Master: op=PointingHead serial=10864 13:08:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:08:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:08:47 Point started: ret=0 13:08:47 point_skyscan result=0 13:08:48 Check angles 13:08:48 SkyScan query 13:08:49 SkyScan query done: ret=0 az=108.93<-7262 ze=38.49<-9434 Statuses=0009 0008 13:08:49 Msec=0 True Az=108.93 Ze=38.49 Az status=0009 Ze status=0008 13:08:49 Check angles 13:08:49 SkyScan query 13:08:49 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 13:08:49 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 13:08:50 Check angles 13:08:50 SkyScan query 13:08:50 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 13:08:50 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 13:08:50 Check angles 13:08:50 SkyScan query 13:08:51 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 13:08:51 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 13:08:51 Check angles 13:08:51 SkyScan query 13:08:52 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:08:52 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:08:52 Check angles 13:08:52 SkyScan query 13:08:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:08:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:08:52 Message to Master queued w/err=0: serial=10864 error=0 13:08:57 Received message from Master: op=Filter serial=10865 13:08:57 Color wheel filter change from 0 to 0 13:08:57 FLIGetFilterPos err=0 currentPosition=0 13:08:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:08:57 Filter is already there-color wheel unchanged 13:08:58 Received message from Master: op=Shutter serial=10866 13:08:58 Shutter LASER close 13:08:58 Received message from Camera: op=State serial=10868 13:08:58 GetSingleValue result=40 Value=cccccccc 13:08:58 SkyScan query 13:08:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:08:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:58 Parameters OK 13:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:58 Set A/D data flow result=40 13:08:58 Set A/D channel type result=40 13:08:58 Set A/D encoding result=40 13:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:58 Set channel filter=0.000000e+000 result=40 13:08:58 Config A/D Result=40 13:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:58 Get A/D filter: -9.255963e+061 result=40 13:08:58 Get A/D value=-858993460 result=40 13:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:08:58 Parameters OK 13:08:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:08:58 Set A/D data flow result=40 13:08:58 Set A/D channel type result=40 13:08:58 Set A/D encoding result=40 13:08:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:08:58 Set channel filter=0.000000e+000 result=40 13:08:58 Config A/D Result=40 13:08:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:08:58 Get A/D filter: -9.255963e+061 result=40 13:08:58 Get A/D value=-858993460 result=40 13:08:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:08:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:08:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:08:58 Aux= 13:08:58 Message to Camera, serial 10868 queued 13:09:29 Received message from Master: op=PointingHead serial=10875 13:09:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:09:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:09:30 Point started: ret=0 13:09:30 point_skyscan result=0 13:09:30 Check angles 13:09:30 SkyScan query 13:09:31 SkyScan query done: ret=0 az=152.985<-10199 ze=8.61<-11426 Statuses=0009 0009 13:09:31 Msec=0 True Az=152.985 Ze=8.61 Az status=0009 Ze status=0009 13:09:31 Check angles [UTC 2018-12-4 13:09:31] 13:09:31 SkyScan query 13:09:32 SkyScan query done: ret=0 az=133.935<-8929 ze=-14.085<-12939 Statuses=0009 0009 13:09:32 Msec=750 True Az=133.935 Ze=-14.085 Az status=0009 Ze status=0009 13:09:32 Check angles 13:09:32 SkyScan query 13:09:32 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.705<-14247 Statuses=0009 0009 13:09:32 Msec=1500 True Az=117.585 Ze=-33.705 Az status=0009 Ze status=0009 13:09:33 Check angles 13:09:33 SkyScan query 13:09:33 SkyScan query done: ret=0 az=100.2<-6680 ze=-51.54<-15436 Statuses=0009 0009 13:09:33 Msec=2250 True Az=100.2 Ze=-51.54 Az status=0009 Ze status=0009 13:09:33 Check angles 13:09:33 SkyScan query 13:09:34 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:09:34 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:09:34 Check angles 13:09:34 SkyScan query 13:09:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:09:35 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:09:35 Message to Master queued w/err=0: serial=10875 error=0 13:09:40 Received message from Master: op=Filter serial=10876 13:09:40 Color wheel filter change from 0 to 0 13:09:40 FLIGetFilterPos err=0 currentPosition=0 13:09:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:09:40 Filter is already there-color wheel unchanged 13:09:40 Received message from Master: op=Shutter serial=10877 13:09:40 Shutter LASER close 13:09:40 Received message from Camera: op=State serial=10879 13:09:40 GetSingleValue result=40 Value=cccccccc 13:09:40 SkyScan query 13:09:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:09:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:40 Parameters OK 13:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:40 Set A/D data flow result=40 13:09:40 Set A/D channel type result=40 13:09:40 Set A/D encoding result=40 13:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:40 Set channel filter=0.000000e+000 result=40 13:09:40 Config A/D Result=40 13:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:40 Get A/D filter: -9.255963e+061 result=40 13:09:40 Get A/D value=-858993460 result=40 13:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:09:40 Parameters OK 13:09:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:09:40 Set A/D data flow result=40 13:09:40 Set A/D channel type result=40 13:09:40 Set A/D encoding result=40 13:09:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:09:40 Set channel filter=0.000000e+000 result=40 13:09:40 Config A/D Result=40 13:09:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:09:40 Get A/D filter: -9.255963e+061 result=40 13:09:40 Get A/D value=-858993460 result=40 13:09:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:09:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:09:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:09:40 Aux= 13:09:40 Message to Camera, serial 10879 queued 13:10:11 Received message from Master: op=PointingHead serial=10886 13:10:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:10:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:10:12 Point started: ret=0 13:10:12 point_skyscan result=0 13:10:12 Check angles 13:10:12 SkyScan query 13:10:13 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.525<-17435 Statuses=0009 0009 13:10:13 Msec=0 True Az=109.185 Ze=-81.525 Az status=0009 Ze status=0009 13:10:13 Check angles 13:10:13 SkyScan query 13:10:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 13:10:14 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 13:10:14 Check angles 13:10:14 SkyScan query 13:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.84<-20256 Statuses=0008 0009 13:10:15 Msec=1500 True Az=112.995 Ze=-123.84 Az status=0008 Ze status=0009 13:10:15 Check angles 13:10:15 SkyScan query 13:10:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 13:10:15 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 13:10:15 Check angles 13:10:15 SkyScan query 13:10:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 13:10:16 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 13:10:16 Check angles 13:10:16 SkyScan query 13:10:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:10:17 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:10:17 Message to Master queued w/err=0: serial=10886 error=0 13:10:22 Received message from Master: op=Filter serial=10887 13:10:22 Color wheel filter change from 0 to 0 13:10:22 FLIGetFilterPos err=0 currentPosition=0 13:10:22 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:22 Filter is already there-color wheel unchanged 13:10:22 Received message from Master: op=Shutter serial=10888 13:10:22 Shutter LASER open 13:10:22 Received message from Camera: op=State serial=10890 13:10:22 GetSingleValue result=40 Value=cccccccc 13:10:22 SkyScan query 13:10:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:10:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:23 Parameters OK 13:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:23 Set A/D data flow result=40 13:10:23 Set A/D channel type result=40 13:10:23 Set A/D encoding result=40 13:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:23 Set channel filter=0.000000e+000 result=40 13:10:23 Config A/D Result=40 13:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:23 Get A/D filter: -9.255963e+061 result=40 13:10:23 Get A/D value=-858993460 result=40 13:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:23 Parameters OK 13:10:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:23 Set A/D data flow result=40 13:10:23 Set A/D channel type result=40 13:10:23 Set A/D encoding result=40 13:10:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:23 Set channel filter=0.000000e+000 result=40 13:10:23 Config A/D Result=40 13:10:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:23 Get A/D filter: -9.255963e+061 result=40 13:10:23 Get A/D value=-858993460 result=40 13:10:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:23 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:23 Aux= 13:10:23 Message to Camera, serial 10890 queued 13:10:25 Received message from Master: op=Shutter serial=10894 13:10:25 Shutter LASER close 13:10:26 Received message from Master: op=PointingHead serial=10898 13:10:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:10:26 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:10:26 Point started: ret=0 13:10:26 point_skyscan result=0 13:10:27 Check angles 13:10:27 SkyScan query 13:10:27 SkyScan query done: ret=0 az=89.925<-5995 ze=157.2<-1520 Statuses=0009 0009 13:10:27 Msec=0 True Az=89.925 Ze=157.2 Az status=0009 Ze status=0009 13:10:27 Check angles 13:10:27 SkyScan query 13:10:28 SkyScan query done: ret=0 az=72.42<-4828 ze=136.23<-2918 Statuses=0009 0009 13:10:28 Msec=750 True Az=72.42 Ze=136.23 Az status=0009 Ze status=0009 13:10:28 Check angles 13:10:28 SkyScan query 13:10:29 SkyScan query done: ret=0 az=54.72<-3648 ze=114.855<-4343 Statuses=0009 0009 13:10:29 Msec=1500 True Az=54.72 Ze=114.855 Az status=0009 Ze status=0009 13:10:29 Check angles 13:10:29 SkyScan query 13:10:29 SkyScan query done: ret=0 az=40.86<-2724 ze=93.885<-5741 Statuses=0009 0009 13:10:29 Msec=2250 True Az=40.86 Ze=93.885 Az status=0009 Ze status=0009 13:10:30 Check angles 13:10:30 SkyScan query 13:10:30 SkyScan query done: ret=0 az=41.01<-2734 ze=72.915<-7139 Statuses=0008 0009 13:10:30 Msec=3000 True Az=41.01 Ze=72.915 Az status=0008 Ze status=0009 13:10:30 Check angles 13:10:30 SkyScan query 13:10:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.53<-8498 Statuses=0008 0009 13:10:31 Msec=3750 True Az=40.995 Ze=52.53 Az status=0008 Ze status=0009 13:10:31 Check angles 13:10:31 SkyScan query 13:10:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:10:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:10:32 Message to Master queued w/err=0: serial=10898 error=0 13:10:37 Received message from Master: op=Filter serial=10899 13:10:37 Color wheel filter change from 0 to 0 13:10:37 FLIGetFilterPos err=0 currentPosition=0 13:10:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:10:37 Filter is already there-color wheel unchanged 13:10:37 Received message from Master: op=Shutter serial=10900 13:10:37 Shutter LASER close 13:10:37 Received message from Camera: op=State serial=10902 13:10:37 GetSingleValue result=40 Value=cccccccc 13:10:37 SkyScan query 13:10:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:10:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:38 Parameters OK 13:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:38 Set A/D data flow result=40 13:10:38 Set A/D channel type result=40 13:10:38 Set A/D encoding result=40 13:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:38 Set channel filter=0.000000e+000 result=40 13:10:38 Config A/D Result=40 13:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:38 Get A/D filter: -9.255963e+061 result=40 13:10:38 Get A/D value=-858993460 result=40 13:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:10:38 Parameters OK 13:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:10:38 Set A/D data flow result=40 13:10:38 Set A/D channel type result=40 13:10:38 Set A/D encoding result=40 13:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:10:38 Set channel filter=0.000000e+000 result=40 13:10:38 Config A/D Result=40 13:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:10:38 Get A/D filter: -9.255963e+061 result=40 13:10:38 Get A/D value=-858993460 result=40 13:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:10:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:10:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:10:38 Aux= 13:10:38 Message to Camera, serial 10902 queued 13:11:09 Received message from Master: op=PointingHead serial=10909 13:11:09 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:11:09 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:11:09 Point started: ret=0 13:11:09 point_skyscan result=0 13:11:10 Check angles 13:11:10 SkyScan query 13:11:10 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 13:11:10 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 13:11:10 Check angles 13:11:10 SkyScan query 13:11:11 SkyScan query done: ret=0 az=81.24<-5416 ze=66.51<-7566 Statuses=0009 0008 13:11:11 Msec=750 True Az=81.24 Ze=66.51 Az status=0009 Ze status=0008 13:11:11 Check angles 13:11:11 SkyScan query 13:11:12 SkyScan query done: ret=0 az=98.955<-6597 ze=66.495<-7567 Statuses=0009 0008 13:11:12 Msec=1500 True Az=98.955 Ze=66.495 Az status=0009 Ze status=0008 13:11:12 Check angles 13:11:12 SkyScan query 13:11:12 SkyScan query done: ret=0 az=116.37<-7758 ze=66.495<-7567 Statuses=0009 0008 13:11:12 Msec=2250 True Az=116.37 Ze=66.495 Az status=0009 Ze status=0008 13:11:13 Check angles 13:11:13 SkyScan query 13:11:13 SkyScan query done: ret=0 az=133.785<-8919 ze=66.495<-7567 Statuses=0009 0008 13:11:13 Msec=3000 True Az=133.785 Ze=66.495 Az status=0009 Ze status=0008 13:11:13 Check angles 13:11:13 SkyScan query 13:11:14 SkyScan query done: ret=0 az=151.185<-10079 ze=66.495<-7567 Statuses=0009 0008 13:11:14 Msec=3750 True Az=151.185 Ze=66.495 Az status=0009 Ze status=0008 13:11:14 Check angles 13:11:14 SkyScan query 13:11:15 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 13:11:15 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 13:11:15 Message to Master queued w/err=0: serial=10909 error=0 13:11:20 Received message from Master: op=Filter serial=10910 13:11:20 Color wheel filter change from 0 to 0 13:11:20 FLIGetFilterPos err=0 currentPosition=0 13:11:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:11:20 Filter is already there-color wheel unchanged 13:11:20 Received message from Master: op=Shutter serial=10911 13:11:20 Shutter LASER close 13:11:20 Received message from Camera: op=State serial=10913 13:11:20 GetSingleValue result=40 Value=cccccccc 13:11:20 SkyScan query 13:11:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:20 Parameters OK 13:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:20 Set A/D data flow result=40 13:11:20 Set A/D channel type result=40 13:11:20 Set A/D encoding result=40 13:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:20 Set channel filter=0.000000e+000 result=40 13:11:20 Config A/D Result=40 13:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:20 Get A/D filter: -9.255963e+061 result=40 13:11:20 Get A/D value=-858993460 result=40 13:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:11:20 Parameters OK 13:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:11:20 Set A/D data flow result=40 13:11:20 Set A/D channel type result=40 13:11:20 Set A/D encoding result=40 13:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:11:20 Set channel filter=0.000000e+000 result=40 13:11:20 Config A/D Result=40 13:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:11:20 Get A/D filter: -9.255963e+061 result=40 13:11:20 Get A/D value=-858993460 result=40 13:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:11:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:11:20 Aux= 13:11:20 Message to Camera, serial 10913 queued 13:11:51 Received message from Master: op=PointingHead serial=10920 13:11:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:11:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:11:52 Point started: ret=0 13:11:52 point_skyscan result=0 13:11:52 Check angles 13:11:52 SkyScan query 13:11:53 SkyScan query done: ret=0 az=134.49<-8966 ze=36.12<-9592 Statuses=0009 0009 13:11:53 Msec=0 True Az=134.49 Ze=36.12 Az status=0009 Ze status=0009 13:11:53 Check angles 13:11:53 SkyScan query 13:11:54 SkyScan query done: ret=0 az=116.97<-7798 ze=15.165<-10989 Statuses=0009 0009 13:11:54 Msec=750 True Az=116.97 Ze=15.165 Az status=0009 Ze status=0009 13:11:54 Check angles 13:11:54 SkyScan query 13:11:55 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.79<-12386 Statuses=0009 0009 13:11:55 Msec=1500 True Az=99.66 Ze=-5.79 Az status=0009 Ze status=0009 13:11:55 Check angles 13:11:55 SkyScan query 13:11:55 SkyScan query done: ret=0 az=82.14<-5476 ze=-26.745<-13783 Statuses=0009 0009 13:11:55 Msec=2250 True Az=82.14 Ze=-26.745 Az status=0009 Ze status=0009 13:11:55 Check angles 13:11:55 SkyScan query 13:11:56 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.565<-14571 Statuses=0009 0008 13:11:56 Msec=3000 True Az=64.665 Ze=-38.565 Az status=0009 Ze status=0008 13:11:56 Check angles 13:11:56 SkyScan query 13:11:57 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.52<-14568 Statuses=0009 0008 13:11:57 Msec=3750 True Az=46.8 Ze=-38.52 Az status=0009 Ze status=0008 13:11:57 Check angles 13:11:57 SkyScan query 13:11:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:11:58 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:11:58 Message to Master queued w/err=0: serial=10920 error=0 13:12:03 Received message from Master: op=Filter serial=10921 13:12:03 Color wheel filter change from 0 to 0 13:12:03 FLIGetFilterPos err=0 currentPosition=0 13:12:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:03 Filter is already there-color wheel unchanged 13:12:03 Received message from Master: op=Shutter serial=10922 13:12:03 Shutter LASER close 13:12:03 Received message from Camera: op=State serial=10924 13:12:03 GetSingleValue result=40 Value=cccccccc 13:12:03 SkyScan query 13:12:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:12:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:03 Parameters OK 13:12:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:03 Set A/D data flow result=40 13:12:03 Set A/D channel type result=40 13:12:03 Set A/D encoding result=40 13:12:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:03 Set channel filter=0.000000e+000 result=40 13:12:03 Config A/D Result=40 13:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:03 Get A/D filter: -9.255963e+061 result=40 13:12:03 Get A/D value=-858993460 result=40 13:12:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:03 Parameters OK 13:12:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:03 Set A/D data flow result=40 13:12:03 Set A/D channel type result=40 13:12:03 Set A/D encoding result=40 13:12:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:03 Set channel filter=0.000000e+000 result=40 13:12:03 Config A/D Result=40 13:12:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:03 Get A/D filter: -9.255963e+061 result=40 13:12:03 Get A/D value=-858993460 result=40 13:12:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:03 Aux= 13:12:03 Message to Camera, serial 10924 queued [UTC 2018-12-4 13:12:09] 13:12:34 Received message from Master: op=PointingHead serial=10931 13:12:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:12:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:12:35 Point started: ret=0 13:12:35 point_skyscan result=0 13:12:35 Check angles 13:12:35 SkyScan query 13:12:36 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.4<-16560 Statuses=0009 0009 13:12:36 Msec=0 True Az=63.915 Ze=-68.4 Az status=0009 Ze status=0009 13:12:36 Check angles 13:12:36 SkyScan query 13:12:37 SkyScan query done: ret=0 az=81.66<-5444 ze=-89.37<-17958 Statuses=0009 0009 13:12:37 Msec=750 True Az=81.66 Ze=-89.37 Az status=0009 Ze status=0009 13:12:37 Check angles 13:12:37 SkyScan query 13:12:37 SkyScan query done: ret=0 az=98.97<-6598 ze=-110.31<-19354 Statuses=0009 0009 13:12:37 Msec=1500 True Az=98.97 Ze=-110.31 Az status=0009 Ze status=0009 13:12:38 Check angles 13:12:38 SkyScan query 13:12:38 SkyScan query done: ret=0 az=116.88<-7792 ze=-131.7<-20780 Statuses=0009 0009 13:12:38 Msec=2250 True Az=116.88 Ze=-131.7 Az status=0009 Ze status=0009 13:12:38 Check angles 13:12:38 SkyScan query 13:12:39 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 13:12:39 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 13:12:39 Check angles 13:12:39 SkyScan query 13:12:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 13:12:40 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 13:12:40 Message to Master queued w/err=0: serial=10931 error=0 13:12:45 Received message from Master: op=Filter serial=10932 13:12:45 Color wheel filter change from 0 to 0 13:12:45 FLIGetFilterPos err=0 currentPosition=0 13:12:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:12:45 Filter is already there-color wheel unchanged 13:12:45 Received message from Master: op=Shutter serial=10933 13:12:45 Shutter LASER close 13:12:45 Received message from Camera: op=State serial=10935 13:12:45 GetSingleValue result=40 Value=cccccccc 13:12:45 SkyScan query 13:12:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:12:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:45 Parameters OK 13:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:45 Set A/D data flow result=40 13:12:45 Set A/D channel type result=40 13:12:45 Set A/D encoding result=40 13:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:45 Set channel filter=0.000000e+000 result=40 13:12:45 Config A/D Result=40 13:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:45 Get A/D filter: -9.255963e+061 result=40 13:12:45 Get A/D value=-858993460 result=40 13:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:12:45 Parameters OK 13:12:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:12:45 Set A/D data flow result=40 13:12:45 Set A/D channel type result=40 13:12:45 Set A/D encoding result=40 13:12:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:12:45 Set channel filter=0.000000e+000 result=40 13:12:45 Config A/D Result=40 13:12:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:12:45 Get A/D filter: -9.255963e+061 result=40 13:12:45 Get A/D value=-858993460 result=40 13:12:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:12:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:12:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:12:45 Aux= 13:12:45 Message to Camera, serial 10935 queued 13:13:16 Received message from Master: op=PointingHead serial=10942 13:13:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:13:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:13:17 Point started: ret=0 13:13:17 point_skyscan result=0 13:13:17 Check angles 13:13:17 SkyScan query 13:13:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 13:13:18 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 13:13:18 Check angles 13:13:18 SkyScan query 13:13:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:13:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:13:19 Message to Master queued w/err=0: serial=10942 error=0 13:13:24 Received message from Master: op=Filter serial=10943 13:13:24 Color wheel filter change from 0 to 0 13:13:24 FLIGetFilterPos err=0 currentPosition=0 13:13:24 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:24 Filter is already there-color wheel unchanged 13:13:24 Received message from Master: op=Shutter serial=10944 13:13:24 Shutter LASER open 13:13:24 Received message from Camera: op=State serial=10946 13:13:24 GetSingleValue result=40 Value=cccccccc 13:13:24 SkyScan query 13:13:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:13:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:25 Parameters OK 13:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:25 Set A/D data flow result=40 13:13:25 Set A/D channel type result=40 13:13:25 Set A/D encoding result=40 13:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:25 Set channel filter=0.000000e+000 result=40 13:13:25 Config A/D Result=40 13:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:25 Get A/D filter: -9.255963e+061 result=40 13:13:25 Get A/D value=-858993460 result=40 13:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:25 Parameters OK 13:13:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:25 Set A/D data flow result=40 13:13:25 Set A/D channel type result=40 13:13:25 Set A/D encoding result=40 13:13:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:25 Set channel filter=0.000000e+000 result=40 13:13:25 Config A/D Result=40 13:13:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:25 Get A/D filter: -9.255963e+061 result=40 13:13:25 Get A/D value=-858993460 result=40 13:13:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:25 Aux= 13:13:25 Message to Camera, serial 10946 queued 13:13:27 Received message from Master: op=Shutter serial=10950 13:13:27 Shutter LASER close 13:13:28 Received message from Master: op=PointingHead serial=10954 13:13:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:13:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:13:28 Point started: ret=0 13:13:28 point_skyscan result=0 13:13:29 Check angles 13:13:29 SkyScan query 13:13:29 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.31<-21554 Statuses=0009 0009 13:13:29 Msec=0 True Az=136.02 Ze=-143.31 Az status=0009 Ze status=0009 13:13:30 Check angles 13:13:30 SkyScan query 13:13:30 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.89<-20126 Statuses=0009 0009 13:13:30 Msec=750 True Az=153.825 Ze=-121.89 Az status=0009 Ze status=0009 13:13:30 Check angles 13:13:30 SkyScan query 13:13:31 SkyScan query done: ret=0 az=171.375<-11425 ze=-100.98<-18732 Statuses=0009 0009 13:13:31 Msec=1500 True Az=171.375 Ze=-100.98 Az status=0009 Ze status=0009 13:13:31 Check angles 13:13:31 SkyScan query 13:13:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.025<-17335 Statuses=0008 0009 13:13:32 Msec=2250 True Az=176.025 Ze=-80.025 Az status=0008 Ze status=0009 13:13:32 Check angles 13:13:32 SkyScan query 13:13:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.62<-15908 Statuses=0008 0009 13:13:32 Msec=3000 True Az=175.995 Ze=-58.62 Az status=0008 Ze status=0009 13:13:33 Check angles 13:13:33 SkyScan query 13:13:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:13:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:13:33 Message to Master queued w/err=0: serial=10954 error=0 13:13:38 Received message from Master: op=Filter serial=10955 13:13:38 Color wheel filter change from 0 to 0 13:13:38 FLIGetFilterPos err=0 currentPosition=0 13:13:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:13:38 Filter is already there-color wheel unchanged 13:13:38 Received message from Master: op=Shutter serial=10956 13:13:38 Shutter LASER close 13:13:39 Received message from Camera: op=State serial=10958 13:13:39 GetSingleValue result=40 Value=cccccccc 13:13:39 SkyScan query 13:13:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:13:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:39 Parameters OK 13:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:39 Set A/D data flow result=40 13:13:39 Set A/D channel type result=40 13:13:39 Set A/D encoding result=40 13:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:39 Set channel filter=0.000000e+000 result=40 13:13:39 Config A/D Result=40 13:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:39 Get A/D filter: -9.255963e+061 result=40 13:13:39 Get A/D value=-858993460 result=40 13:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:13:39 Parameters OK 13:13:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:13:39 Set A/D data flow result=40 13:13:39 Set A/D channel type result=40 13:13:39 Set A/D encoding result=40 13:13:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:13:39 Set channel filter=0.000000e+000 result=40 13:13:39 Config A/D Result=40 13:13:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:13:39 Get A/D filter: -9.255963e+061 result=40 13:13:39 Get A/D value=-858993460 result=40 13:13:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:13:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:13:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:13:39 Aux= 13:13:39 Message to Camera, serial 10958 queued 13:14:10 Received message from Master: op=PointingHead serial=10965 13:14:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:14:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:14:10 Point started: ret=0 13:14:10 point_skyscan result=0 13:14:11 Check angles 13:14:11 SkyScan query 13:14:12 SkyScan query done: ret=0 az=152.31<-10154 ze=-21.225<-13415 Statuses=0009 0009 13:14:12 Msec=0 True Az=152.31 Ze=-21.225 Az status=0009 Ze status=0009 13:14:12 Check angles 13:14:12 SkyScan query 13:14:12 SkyScan query done: ret=0 az=134.415<-8961 ze=0.18<-11988 Statuses=0009 0009 13:14:12 Msec=750 True Az=134.415 Ze=0.18 Az status=0009 Ze status=0009 13:14:13 Check angles 13:14:13 SkyScan query 13:14:13 SkyScan query done: ret=0 az=116.895<-7793 ze=21.12<-10592 Statuses=0009 0009 13:14:13 Msec=1500 True Az=116.895 Ze=21.12 Az status=0009 Ze status=0009 13:14:13 Check angles 13:14:13 SkyScan query 13:14:14 SkyScan query done: ret=0 az=99.6<-6640 ze=42.105<-9193 Statuses=0009 0009 13:14:14 Msec=2250 True Az=99.6 Ze=42.105 Az status=0009 Ze status=0009 13:14:14 Check angles 13:14:14 SkyScan query 13:14:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 13:14:15 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 13:14:15 Check angles 13:14:15 SkyScan query 13:14:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:14:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:14:15 Message to Master queued w/err=0: serial=10965 error=0 13:14:20 Received message from Master: op=Filter serial=10966 13:14:20 Color wheel filter change from 0 to 0 13:14:20 FLIGetFilterPos err=0 currentPosition=0 13:14:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:14:20 Filter is already there-color wheel unchanged 13:14:21 Received message from Master: op=Shutter serial=10967 13:14:21 Shutter LASER close 13:14:21 Received message from Camera: op=State serial=10969 13:14:21 GetSingleValue result=40 Value=cccccccc 13:14:21 SkyScan query 13:14:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:14:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:21 Parameters OK 13:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:21 Set A/D data flow result=40 13:14:21 Set A/D channel type result=40 13:14:21 Set A/D encoding result=40 13:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:21 Set channel filter=0.000000e+000 result=40 13:14:21 Config A/D Result=40 13:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:21 Get A/D filter: -9.255963e+061 result=40 13:14:21 Get A/D value=-858993460 result=40 13:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:14:21 Parameters OK 13:14:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:14:21 Set A/D data flow result=40 13:14:21 Set A/D channel type result=40 13:14:21 Set A/D encoding result=40 13:14:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:14:21 Set channel filter=0.000000e+000 result=40 13:14:21 Config A/D Result=40 13:14:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:14:21 Get A/D filter: -9.255963e+061 result=40 13:14:21 Get A/D value=-858993460 result=40 13:14:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:14:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:14:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:14:21 Aux= 13:14:21 Message to Camera, serial 10969 queued 13:14:52 Received message from Master: op=PointingHead serial=10976 13:14:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:14:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:14:52 Point started: ret=0 13:14:52 point_skyscan result=0 13:14:53 Check angles 13:14:53 SkyScan query 13:14:54 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 13:14:54 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 13:14:54 Check angles 13:14:54 SkyScan query 13:14:55 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 13:14:55 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 13:14:55 Check angles 13:14:55 SkyScan query 13:14:55 SkyScan query done: ret=0 az=144.405<-9627 ze=38.505<-9433 Statuses=0009 0008 13:14:55 Msec=1500 True Az=144.405 Ze=38.505 Az status=0009 Ze status=0008 13:14:55 Check angles 13:14:55 SkyScan query 13:14:56 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 13:14:56 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 13:14:56 Check angles 13:14:56 SkyScan query 13:14:57 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:14:57 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:14:57 Check angles 13:14:57 SkyScan query 13:14:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:14:58 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:14:58 Message to Master queued w/err=0: serial=10976 error=0 13:15:03 Received message from Master: op=Filter serial=10977 13:15:03 Color wheel filter change from 0 to 0 13:15:03 FLIGetFilterPos err=0 currentPosition=0 13:15:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:03 Filter is already there-color wheel unchanged 13:15:03 Received message from Master: op=Shutter serial=10978 13:15:03 Shutter LASER close 13:15:03 Received message from Camera: op=State serial=10980 13:15:03 GetSingleValue result=40 Value=cccccccc 13:15:03 SkyScan query 13:15:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:15:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:03 Parameters OK 13:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:03 Set A/D data flow result=40 13:15:03 Set A/D channel type result=40 13:15:03 Set A/D encoding result=40 13:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:03 Set channel filter=0.000000e+000 result=40 13:15:03 Config A/D Result=40 13:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:03 Get A/D filter: -9.255963e+061 result=40 13:15:03 Get A/D value=-858993460 result=40 13:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:03 Parameters OK 13:15:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:03 Set A/D data flow result=40 13:15:03 Set A/D channel type result=40 13:15:03 Set A/D encoding result=40 13:15:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:03 Set channel filter=0.000000e+000 result=40 13:15:03 Config A/D Result=40 13:15:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:03 Get A/D filter: -9.255963e+061 result=40 13:15:03 Get A/D value=-858993460 result=40 13:15:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:03 Aux= 13:15:03 Message to Camera, serial 10980 queued 13:15:34 Received message from Master: op=PointingHead serial=10987 13:15:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:15:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:15:35 Point started: ret=0 13:15:35 point_skyscan result=0 13:15:35 Check angles 13:15:35 SkyScan query 13:15:36 SkyScan query done: ret=0 az=153.24<-10216 ze=8.925<-11405 Statuses=0009 0009 13:15:36 Msec=0 True Az=153.24 Ze=8.925 Az status=0009 Ze status=0009 13:15:36 Check angles 13:15:36 SkyScan query 13:15:37 SkyScan query done: ret=0 az=135.375<-9025 ze=-12.45<-12830 Statuses=0009 0009 13:15:37 Msec=750 True Az=135.375 Ze=-12.45 Az status=0009 Ze status=0009 13:15:37 Check angles 13:15:37 SkyScan query 13:15:37 SkyScan query done: ret=0 az=117.495<-7833 ze=-33.795<-14253 Statuses=0009 0009 13:15:37 Msec=1500 True Az=117.495 Ze=-33.795 Az status=0009 Ze status=0009 13:15:38 Check angles 13:15:38 SkyScan query 13:15:38 SkyScan query done: ret=0 az=100.14<-6676 ze=-51.555<-15437 Statuses=0009 0009 13:15:38 Msec=2250 True Az=100.14 Ze=-51.555 Az status=0009 Ze status=0009 13:15:38 Check angles 13:15:38 SkyScan query 13:15:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 13:15:39 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 13:15:39 Check angles 13:15:39 SkyScan query 13:15:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:15:40 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:15:40 Message to Master queued w/err=0: serial=10987 error=0 13:15:45 Received message from Master: op=Filter serial=10988 13:15:45 Color wheel filter change from 0 to 0 13:15:45 FLIGetFilterPos err=0 currentPosition=0 13:15:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:15:45 Filter is already there-color wheel unchanged 13:15:45 Received message from Master: op=Shutter serial=10989 13:15:45 Shutter LASER close 13:15:45 Received message from Camera: op=State serial=10991 13:15:45 GetSingleValue result=40 Value=cccccccc 13:15:45 SkyScan query 13:15:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:15:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:45 Parameters OK 13:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:45 Set A/D data flow result=40 13:15:45 Set A/D channel type result=40 13:15:45 Set A/D encoding result=40 13:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:45 Set channel filter=0.000000e+000 result=40 13:15:45 Config A/D Result=40 13:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:45 Get A/D filter: -9.255963e+061 result=40 13:15:45 Get A/D value=-858993460 result=40 13:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:15:45 Parameters OK 13:15:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:15:45 Set A/D data flow result=40 13:15:45 Set A/D channel type result=40 13:15:45 Set A/D encoding result=40 13:15:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:15:45 Set channel filter=0.000000e+000 result=40 13:15:45 Config A/D Result=40 13:15:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:15:45 Get A/D filter: -9.255963e+061 result=40 13:15:45 Get A/D value=-858993460 result=40 13:15:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:15:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:15:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:15:45 Aux= 13:15:45 Message to Camera, serial 10991 queued 13:16:16 Received message from Master: op=PointingHead serial=10998 13:16:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:16:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:16:17 Point started: ret=0 13:16:17 point_skyscan result=0 13:16:17 Check angles 13:16:17 SkyScan query 13:16:18 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.27<-17418 Statuses=0009 0009 13:16:18 Msec=0 True Az=108.975 Ze=-81.27 Az status=0009 Ze status=0009 13:16:18 Check angles 13:16:18 SkyScan query 13:16:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.21<-18814 Statuses=0008 0009 13:16:19 Msec=750 True Az=112.995 Ze=-102.21 Az status=0008 Ze status=0009 13:16:19 Check angles 13:16:19 SkyScan query 13:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 13:16:20 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 13:16:20 Check angles 13:16:20 SkyScan query 13:16:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.54<-21636 Statuses=0008 0009 13:16:20 Msec=2250 True Az=112.995 Ze=-144.54 Az status=0008 Ze status=0009 13:16:20 Check angles 13:16:20 SkyScan query 13:16:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 13:16:21 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 13:16:21 Check angles 13:16:21 SkyScan query 13:16:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:16:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:16:22 Message to Master queued w/err=0: serial=10998 error=0 13:16:27 Received message from Master: op=Filter serial=10999 13:16:27 Color wheel filter change from 0 to 0 13:16:27 FLIGetFilterPos err=0 currentPosition=0 13:16:27 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:27 Filter is already there-color wheel unchanged 13:16:27 Received message from Master: op=Shutter serial=11000 13:16:27 Shutter LASER open 13:16:27 Received message from Camera: op=State serial=11002 13:16:27 GetSingleValue result=40 Value=cccccccc 13:16:27 SkyScan query 13:16:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:16:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:28 Parameters OK 13:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:28 Set A/D data flow result=40 13:16:28 Set A/D channel type result=40 13:16:28 Set A/D encoding result=40 13:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:28 Set channel filter=0.000000e+000 result=40 13:16:28 Config A/D Result=40 13:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:28 Get A/D filter: -9.255963e+061 result=40 13:16:28 Get A/D value=-858993460 result=40 13:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:28 Parameters OK 13:16:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:28 Set A/D data flow result=40 13:16:28 Set A/D channel type result=40 13:16:28 Set A/D encoding result=40 13:16:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:28 Set channel filter=0.000000e+000 result=40 13:16:28 Config A/D Result=40 13:16:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:28 Get A/D filter: -9.255963e+061 result=40 13:16:28 Get A/D value=-858993460 result=40 13:16:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:28 Aux= 13:16:28 Message to Camera, serial 11002 queued 13:16:30 Received message from Master: op=Shutter serial=11006 13:16:30 Shutter LASER close 13:16:31 Received message from Master: op=PointingHead serial=11010 13:16:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:16:31 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:16:31 Point started: ret=0 13:16:31 point_skyscan result=0 13:16:32 Check angles 13:16:32 SkyScan query 13:16:32 SkyScan query done: ret=0 az=89.67<-5978 ze=156.885<-1541 Statuses=0009 0009 13:16:32 Msec=0 True Az=89.67 Ze=156.885 Az status=0009 Ze status=0009 13:16:33 Check angles 13:16:33 SkyScan query 13:16:33 SkyScan query done: ret=0 az=71.835<-4789 ze=135.585<-2961 Statuses=0009 0009 13:16:33 Msec=750 True Az=71.835 Ze=135.585 Az status=0009 Ze status=0009 13:16:33 Check angles 13:16:33 SkyScan query 13:16:34 SkyScan query done: ret=0 az=54.51<-3634 ze=114.66<-4356 Statuses=0009 0009 13:16:34 Msec=1500 True Az=54.51 Ze=114.66 Az status=0009 Ze status=0009 13:16:34 Check angles 13:16:34 SkyScan query 13:16:35 SkyScan query done: ret=0 az=40.905<-2727 ze=93.705<-5753 Statuses=0009 0009 13:16:35 Msec=2250 True Az=40.905 Ze=93.705 Az status=0009 Ze status=0009 13:16:35 Check angles 13:16:35 SkyScan query 13:16:35 SkyScan query done: ret=0 az=41.01<-2734 ze=72.72<-7152 Statuses=0008 0009 13:16:35 Msec=3000 True Az=41.01 Ze=72.72 Az status=0008 Ze status=0009 13:16:36 Check angles 13:16:36 SkyScan query 13:16:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 13:16:36 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 13:16:36 Check angles 13:16:36 SkyScan query 13:16:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:16:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:16:37 Message to Master queued w/err=0: serial=11010 error=0 13:16:42 Received message from Master: op=Filter serial=11011 13:16:42 Color wheel filter change from 0 to 0 13:16:42 FLIGetFilterPos err=0 currentPosition=0 13:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:16:42 Filter is already there-color wheel unchanged 13:16:42 Received message from Master: op=Shutter serial=11012 13:16:42 Shutter LASER close 13:16:42 Received message from Camera: op=State serial=11014 13:16:42 GetSingleValue result=40 Value=cccccccc 13:16:42 SkyScan query 13:16:43 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:16:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:43 Parameters OK 13:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:43 Set A/D data flow result=40 13:16:43 Set A/D channel type result=40 13:16:43 Set A/D encoding result=40 13:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:43 Set channel filter=0.000000e+000 result=40 13:16:43 Config A/D Result=40 13:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:43 Get A/D filter: -9.255963e+061 result=40 13:16:43 Get A/D value=-858993460 result=40 13:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:16:43 Parameters OK 13:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:16:43 Set A/D data flow result=40 13:16:43 Set A/D channel type result=40 13:16:43 Set A/D encoding result=40 13:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:16:43 Set channel filter=0.000000e+000 result=40 13:16:43 Config A/D Result=40 13:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:16:43 Get A/D filter: -9.255963e+061 result=40 13:16:43 Get A/D value=-858993460 result=40 13:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:16:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:16:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:16:43 Aux= 13:16:43 Message to Camera, serial 11014 queued 13:17:14 Received message from Master: op=PointingHead serial=11021 13:17:14 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:17:14 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:17:14 Point started: ret=0 13:17:14 point_skyscan result=0 13:17:15 Check angles 13:17:15 SkyScan query 13:17:15 SkyScan query done: ret=0 az=63.915<-4261 ze=66.54<-7564 Statuses=0009 0008 13:17:15 Msec=0 True Az=63.915 Ze=66.54 Az status=0009 Ze status=0008 13:17:15 Check angles 13:17:15 SkyScan query 13:17:16 SkyScan query done: ret=0 az=81.375<-5425 ze=66.51<-7566 Statuses=0009 0008 13:17:16 Msec=750 True Az=81.375 Ze=66.51 Az status=0009 Ze status=0008 13:17:16 Check angles 13:17:16 SkyScan query 13:17:17 SkyScan query done: ret=0 az=99.075<-6605 ze=66.495<-7567 Statuses=0009 0008 13:17:17 Msec=1500 True Az=99.075 Ze=66.495 Az status=0009 Ze status=0008 13:17:17 Check angles 13:17:17 SkyScan query 13:17:18 SkyScan query done: ret=0 az=116.49<-7766 ze=66.495<-7567 Statuses=0009 0008 13:17:18 Msec=2250 True Az=116.49 Ze=66.495 Az status=0009 Ze status=0008 13:17:18 Check angles 13:17:18 SkyScan query 13:17:18 SkyScan query done: ret=0 az=133.875<-8925 ze=66.495<-7567 Statuses=0009 0008 13:17:18 Msec=3000 True Az=133.875 Ze=66.495 Az status=0009 Ze status=0008 13:17:18 Check angles 13:17:18 SkyScan query 13:17:19 SkyScan query done: ret=0 az=151.17<-10078 ze=66.495<-7567 Statuses=0009 0008 13:17:19 Msec=3750 True Az=151.17 Ze=66.495 Az status=0009 Ze status=0008 13:17:19 Check angles 13:17:19 SkyScan query 13:17:20 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:17:20 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:17:20 Message to Master queued w/err=0: serial=11021 error=0 13:17:25 Received message from Master: op=Filter serial=11022 13:17:25 Color wheel filter change from 0 to 0 13:17:25 FLIGetFilterPos err=0 currentPosition=0 13:17:25 FLIGetStepsRemaining err=0 RemainingSteps=0 13:17:25 Filter is already there-color wheel unchanged 13:17:25 Received message from Master: op=Shutter serial=11023 13:17:25 Shutter LASER close 13:17:25 Received message from Camera: op=State serial=11025 13:17:25 GetSingleValue result=40 Value=cccccccc 13:17:25 SkyScan query 13:17:26 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:17:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:26 Parameters OK 13:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:26 Set A/D data flow result=40 13:17:26 Set A/D channel type result=40 13:17:26 Set A/D encoding result=40 13:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:26 Set channel filter=0.000000e+000 result=40 13:17:26 Config A/D Result=40 13:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:26 Get A/D filter: -9.255963e+061 result=40 13:17:26 Get A/D value=-858993460 result=40 13:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:17:26 Parameters OK 13:17:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:17:26 Set A/D data flow result=40 13:17:26 Set A/D channel type result=40 13:17:26 Set A/D encoding result=40 13:17:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:17:26 Set channel filter=0.000000e+000 result=40 13:17:26 Config A/D Result=40 13:17:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:17:26 Get A/D filter: -9.255963e+061 result=40 13:17:26 Get A/D value=-858993460 result=40 13:17:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:17:26 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:17:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:17:26 Aux= 13:17:26 Message to Camera, serial 11025 queued 13:17:56 Received message from Master: op=PointingHead serial=11032 13:17:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:17:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:17:57 Point started: ret=0 13:17:57 point_skyscan result=0 13:17:58 Check angles 13:17:58 SkyScan query 13:17:58 SkyScan query done: ret=0 az=134.67<-8978 ze=36.375<-9575 Statuses=0009 0009 13:17:58 Msec=0 True Az=134.67 Ze=36.375 Az status=0009 Ze status=0009 13:17:58 Check angles 13:17:58 SkyScan query 13:17:59 SkyScan query done: ret=0 az=117.12<-7808 ze=15.435<-10971 Statuses=0009 0009 13:17:59 Msec=750 True Az=117.12 Ze=15.435 Az status=0009 Ze status=0009 13:17:59 Check angles 13:17:59 SkyScan query 13:18:00 SkyScan query done: ret=0 az=99.33<-6622 ze=-5.97<-12398 Statuses=0009 0009 13:18:00 Msec=1500 True Az=99.33 Ze=-5.97 Az status=0009 Ze status=0009 13:18:00 Check angles 13:18:00 SkyScan query 13:18:00 SkyScan query done: ret=0 az=82.05<-5470 ze=-26.985<-13799 Statuses=0009 0009 13:18:00 Msec=2250 True Az=82.05 Ze=-26.985 Az status=0009 Ze status=0009 13:18:01 Check angles 13:18:01 SkyScan query 13:18:01 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.565<-14571 Statuses=0009 0008 13:18:01 Msec=3000 True Az=64.485 Ze=-38.565 Az status=0009 Ze status=0008 13:18:01 Check angles 13:18:01 SkyScan query 13:18:02 SkyScan query done: ret=0 az=46.605<-3107 ze=-38.535<-14569 Statuses=0009 0008 13:18:02 Msec=3750 True Az=46.605 Ze=-38.535 Az status=0009 Ze status=0008 13:18:02 Check angles 13:18:02 SkyScan query 13:18:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:18:03 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:18:03 Message to Master queued w/err=0: serial=11032 error=0 13:18:08 Received message from Master: op=Filter serial=11033 13:18:08 Color wheel filter change from 0 to 0 13:18:08 FLIGetFilterPos err=0 currentPosition=0 13:18:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:08 Filter is already there-color wheel unchanged 13:18:08 Received message from Master: op=Shutter serial=11034 13:18:08 Shutter LASER close 13:18:08 Received message from Camera: op=State serial=11036 13:18:08 GetSingleValue result=40 Value=cccccccc 13:18:08 SkyScan query 13:18:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:18:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:08 Parameters OK 13:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:08 Set A/D data flow result=40 13:18:08 Set A/D channel type result=40 13:18:08 Set A/D encoding result=40 13:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:08 Set channel filter=0.000000e+000 result=40 13:18:08 Config A/D Result=40 13:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:08 Get A/D filter: -9.255963e+061 result=40 13:18:08 Get A/D value=-858993460 result=40 13:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:08 Parameters OK 13:18:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:08 Set A/D data flow result=40 13:18:08 Set A/D channel type result=40 13:18:08 Set A/D encoding result=40 13:18:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:08 Set channel filter=0.000000e+000 result=40 13:18:08 Config A/D Result=40 13:18:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:08 Get A/D filter: -9.255963e+061 result=40 13:18:08 Get A/D value=-858993460 result=40 13:18:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:08 Aux= 13:18:08 Message to Camera, serial 11036 queued 13:18:39 Received message from Master: op=PointingHead serial=11043 13:18:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:18:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:18:40 Point started: ret=0 13:18:40 point_skyscan result=0 13:18:40 Check angles 13:18:40 SkyScan query 13:18:41 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.13<-16542 Statuses=0009 0009 13:18:41 Msec=0 True Az=63.81 Ze=-68.13 Az status=0009 Ze status=0009 13:18:41 Check angles 13:18:41 SkyScan query 13:18:42 SkyScan query done: ret=0 az=81.765<-5451 ze=-89.535<-17969 Statuses=0009 0009 13:18:42 Msec=750 True Az=81.765 Ze=-89.535 Az status=0009 Ze status=0009 13:18:42 Check angles 13:18:42 SkyScan query 13:18:42 SkyScan query done: ret=0 az=99.6<-6640 ze=-110.91<-19394 Statuses=0009 0009 13:18:42 Msec=1500 True Az=99.6 Ze=-110.91 Az status=0009 Ze status=0009 13:18:43 Check angles 13:18:43 SkyScan query 13:18:43 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.835<-20789 Statuses=0009 0009 13:18:43 Msec=2250 True Az=117.03 Ze=-131.835 Az status=0009 Ze status=0009 13:18:43 Check angles 13:18:43 SkyScan query 13:18:44 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 13:18:44 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 13:18:44 Check angles 13:18:44 SkyScan query 13:18:45 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:18:45 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:18:45 Message to Master queued w/err=0: serial=11043 error=0 13:18:50 Received message from Master: op=Filter serial=11044 13:18:50 Color wheel filter change from 0 to 0 13:18:50 FLIGetFilterPos err=0 currentPosition=0 13:18:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:18:50 Filter is already there-color wheel unchanged 13:18:50 Received message from Master: op=Shutter serial=11045 13:18:50 Shutter LASER close 13:18:50 Received message from Camera: op=State serial=11047 13:18:50 GetSingleValue result=40 Value=cccccccc 13:18:50 SkyScan query 13:18:51 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:18:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:51 Parameters OK 13:18:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:51 Set A/D data flow result=40 13:18:51 Set A/D channel type result=40 13:18:51 Set A/D encoding result=40 13:18:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:51 Set channel filter=0.000000e+000 result=40 13:18:51 Config A/D Result=40 13:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:51 Get A/D filter: -9.255963e+061 result=40 13:18:51 Get A/D value=-858993460 result=40 13:18:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:18:51 Parameters OK 13:18:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:18:51 Set A/D data flow result=40 13:18:51 Set A/D channel type result=40 13:18:51 Set A/D encoding result=40 13:18:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:18:51 Set channel filter=0.000000e+000 result=40 13:18:51 Config A/D Result=40 13:18:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:18:51 Get A/D filter: -9.255963e+061 result=40 13:18:51 Get A/D value=-858993460 result=40 13:18:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:18:51 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:18:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:18:51 Aux= 13:18:51 Message to Camera, serial 11047 queued 13:19:21 Received message from Master: op=PointingHead serial=11054 13:19:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:19:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:19:22 Point started: ret=0 13:19:22 point_skyscan result=0 13:19:22 Check angles 13:19:22 SkyScan query 13:19:23 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.88<-23392 Statuses=0009 0009 13:19:23 Msec=0 True Az=113.025 Ze=-170.88 Az status=0009 Ze status=0009 13:19:23 Check angles 13:19:23 SkyScan query 13:19:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:19:24 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:19:24 Message to Master queued w/err=0: serial=11054 error=0 13:19:29 Received message from Master: op=Filter serial=11055 13:19:29 Color wheel filter change from 0 to 0 13:19:29 FLIGetFilterPos err=0 currentPosition=0 13:19:29 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:29 Filter is already there-color wheel unchanged 13:19:29 Received message from Master: op=Shutter serial=11056 13:19:29 Shutter LASER open 13:19:29 Received message from Camera: op=State serial=11058 13:19:29 GetSingleValue result=40 Value=cccccccc 13:19:29 SkyScan query 13:19:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:19:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:30 Parameters OK 13:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:30 Set A/D data flow result=40 13:19:30 Set A/D channel type result=40 13:19:30 Set A/D encoding result=40 13:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:30 Set channel filter=0.000000e+000 result=40 13:19:30 Config A/D Result=40 13:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:30 Get A/D filter: -9.255963e+061 result=40 13:19:30 Get A/D value=-858993460 result=40 13:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:30 Parameters OK 13:19:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:30 Set A/D data flow result=40 13:19:30 Set A/D channel type result=40 13:19:30 Set A/D encoding result=40 13:19:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:30 Set channel filter=0.000000e+000 result=40 13:19:30 Config A/D Result=40 13:19:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:30 Get A/D filter: -9.255963e+061 result=40 13:19:30 Get A/D value=-858993460 result=40 13:19:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:30 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:30 Aux= 13:19:30 Message to Camera, serial 11058 queued 13:19:32 Received message from Master: op=Shutter serial=11062 13:19:32 Shutter LASER close 13:19:33 Received message from Master: op=PointingHead serial=11066 13:19:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:19:33 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:19:33 Point started: ret=0 13:19:33 point_skyscan result=0 13:19:34 Check angles 13:19:34 SkyScan query 13:19:34 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.49<-21566 Statuses=0009 0009 13:19:34 Msec=0 True Az=135.735 Ze=-143.49 Az status=0009 Ze status=0009 13:19:35 Check angles 13:19:35 SkyScan query 13:19:35 SkyScan query done: ret=0 az=153.225<-10215 ze=-122.535<-20169 Statuses=0009 0009 13:19:35 Msec=750 True Az=153.225 Ze=-122.535 Az status=0009 Ze status=0009 13:19:35 Check angles 13:19:35 SkyScan query 13:19:36 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.175<-18745 Statuses=0009 0009 13:19:36 Msec=1500 True Az=170.955 Ze=-101.175 Az status=0009 Ze status=0009 13:19:36 Check angles 13:19:36 SkyScan query 13:19:37 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.785<-17319 Statuses=0008 0009 13:19:37 Msec=2250 True Az=176.025 Ze=-79.785 Az status=0008 Ze status=0009 13:19:37 Check angles 13:19:37 SkyScan query 13:19:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 13:19:38 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 13:19:38 Check angles 13:19:38 SkyScan query 13:19:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:19:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:19:38 Message to Master queued w/err=0: serial=11066 error=0 13:19:43 Received message from Master: op=Filter serial=11067 13:19:43 Color wheel filter change from 0 to 0 13:19:43 FLIGetFilterPos err=0 currentPosition=0 13:19:43 FLIGetStepsRemaining err=0 RemainingSteps=0 13:19:43 Filter is already there-color wheel unchanged 13:19:43 Received message from Master: op=Shutter serial=11068 13:19:43 Shutter LASER close 13:19:44 Received message from Camera: op=State serial=11070 13:19:44 GetSingleValue result=40 Value=cccccccc 13:19:44 SkyScan query 13:19:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:19:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:44 Parameters OK 13:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:44 Set A/D data flow result=40 13:19:44 Set A/D channel type result=40 13:19:44 Set A/D encoding result=40 13:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:44 Set channel filter=0.000000e+000 result=40 13:19:44 Config A/D Result=40 13:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:44 Get A/D filter: -9.255963e+061 result=40 13:19:44 Get A/D value=-858993460 result=40 13:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:19:44 Parameters OK 13:19:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:19:44 Set A/D data flow result=40 13:19:44 Set A/D channel type result=40 13:19:44 Set A/D encoding result=40 13:19:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:19:44 Set channel filter=0.000000e+000 result=40 13:19:44 Config A/D Result=40 13:19:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:19:44 Get A/D filter: -9.255963e+061 result=40 13:19:44 Get A/D value=-858993460 result=40 13:19:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:19:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:19:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:19:44 Aux= 13:19:44 Message to Camera, serial 11070 queued 13:20:15 Received message from Master: op=PointingHead serial=11077 13:20:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:20:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:20:15 Point started: ret=0 13:20:15 point_skyscan result=0 13:20:16 Check angles 13:20:16 SkyScan query 13:20:17 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.51<-13434 Statuses=0009 0009 13:20:17 Msec=0 True Az=152.805 Ze=-21.51 Az status=0009 Ze status=0009 13:20:17 Check angles 13:20:17 SkyScan query 13:20:17 SkyScan query done: ret=0 az=134.955<-8997 ze=-0.105<-12007 Statuses=0009 0009 13:20:17 Msec=750 True Az=134.955 Ze=-0.105 Az status=0009 Ze status=0009 13:20:18 Check angles 13:20:18 SkyScan query 13:20:18 SkyScan query done: ret=0 az=117.435<-7829 ze=20.835<-10611 Statuses=0009 0009 13:20:18 Msec=1500 True Az=117.435 Ze=20.835 Az status=0009 Ze status=0009 13:20:18 Check angles 13:20:18 SkyScan query 13:20:19 SkyScan query done: ret=0 az=100.035<-6669 ze=41.79<-9214 Statuses=0009 0009 13:20:19 Msec=2250 True Az=100.035 Ze=41.79 Az status=0009 Ze status=0009 13:20:19 Check angles 13:20:19 SkyScan query 13:20:20 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 13:20:20 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 13:20:20 Check angles 13:20:20 SkyScan query 13:20:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:20:21 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:20:21 Message to Master queued w/err=0: serial=11077 error=0 13:20:26 Received message from Master: op=Filter serial=11078 13:20:26 Color wheel filter change from 0 to 0 13:20:26 FLIGetFilterPos err=0 currentPosition=0 13:20:26 FLIGetStepsRemaining err=0 RemainingSteps=0 13:20:26 Filter is already there-color wheel unchanged 13:20:26 Received message from Master: op=Shutter serial=11079 13:20:26 Shutter LASER close 13:20:26 Received message from Camera: op=State serial=11081 13:20:26 GetSingleValue result=40 Value=cccccccc 13:20:26 SkyScan query 13:20:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:20:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:26 Parameters OK 13:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:26 Set A/D data flow result=40 13:20:26 Set A/D channel type result=40 13:20:26 Set A/D encoding result=40 13:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:26 Set channel filter=0.000000e+000 result=40 13:20:26 Config A/D Result=40 13:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:26 Get A/D filter: -9.255963e+061 result=40 13:20:26 Get A/D value=-858993460 result=40 13:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:20:26 Parameters OK 13:20:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:20:26 Set A/D data flow result=40 13:20:26 Set A/D channel type result=40 13:20:26 Set A/D encoding result=40 13:20:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:20:26 Set channel filter=0.000000e+000 result=40 13:20:26 Config A/D Result=40 13:20:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:20:26 Get A/D filter: -9.255963e+061 result=40 13:20:26 Get A/D value=-858993460 result=40 13:20:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:20:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:20:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:20:26 Aux= 13:20:26 Message to Camera, serial 11081 queued 13:20:57 Received message from Master: op=PointingHead serial=11088 13:20:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:20:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:20:57 Point started: ret=0 13:20:57 point_skyscan result=0 13:20:58 Check angles 13:20:58 SkyScan query 13:20:59 SkyScan query done: ret=0 az=109.395<-7293 ze=38.49<-9434 Statuses=0009 0008 13:20:59 Msec=0 True Az=109.395 Ze=38.49 Az status=0009 Ze status=0008 13:20:59 Check angles 13:20:59 SkyScan query 13:21:00 SkyScan query done: ret=0 az=127.335<-8489 ze=38.505<-9433 Statuses=0009 0008 13:21:00 Msec=750 True Az=127.335 Ze=38.505 Az status=0009 Ze status=0008 13:21:00 Check angles 13:21:00 SkyScan query 13:21:00 SkyScan query done: ret=0 az=144.645<-9643 ze=38.505<-9433 Statuses=0009 0008 13:21:00 Msec=1500 True Az=144.645 Ze=38.505 Az status=0009 Ze status=0008 13:21:01 Check angles 13:21:01 SkyScan query [UTC 2018-12-4 13:21:01] 13:21:01 SkyScan query done: ret=0 az=162.165<-10811 ze=38.505<-9433 Statuses=0009 0008 13:21:01 Msec=2250 True Az=162.165 Ze=38.505 Az status=0009 Ze status=0008 13:21:01 Check angles 13:21:01 SkyScan query 13:21:02 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:21:02 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:21:02 Check angles 13:21:02 SkyScan query 13:21:03 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:21:03 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:21:03 Message to Master queued w/err=0: serial=11088 error=0 13:21:08 Received message from Master: op=Filter serial=11089 13:21:08 Color wheel filter change from 0 to 0 13:21:08 FLIGetFilterPos err=0 currentPosition=0 13:21:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:08 Filter is already there-color wheel unchanged 13:21:08 Received message from Master: op=Shutter serial=11090 13:21:08 Shutter LASER close 13:21:08 Received message from Camera: op=State serial=11092 13:21:08 GetSingleValue result=40 Value=cccccccc 13:21:08 SkyScan query 13:21:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:21:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:08 Parameters OK 13:21:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:08 Set A/D data flow result=40 13:21:08 Set A/D channel type result=40 13:21:08 Set A/D encoding result=40 13:21:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:08 Set channel filter=0.000000e+000 result=40 13:21:08 Config A/D Result=40 13:21:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:08 Get A/D filter: -9.255963e+061 result=40 13:21:08 Get A/D value=-858993460 result=40 13:21:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:08 Parameters OK 13:21:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:08 Set A/D data flow result=40 13:21:08 Set A/D channel type result=40 13:21:08 Set A/D encoding result=40 13:21:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:08 Set channel filter=0.000000e+000 result=40 13:21:08 Config A/D Result=40 13:21:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:08 Get A/D filter: -9.255963e+061 result=40 13:21:08 Get A/D value=-858993460 result=40 13:21:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:08 Aux= 13:21:08 Message to Camera, serial 11092 queued 13:21:39 Received message from Master: op=PointingHead serial=11099 13:21:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:21:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:21:40 Point started: ret=0 13:21:40 point_skyscan result=0 13:21:40 Check angles 13:21:40 SkyScan query 13:21:41 SkyScan query done: ret=0 az=153.225<-10215 ze=8.97<-11402 Statuses=0009 0009 13:21:41 Msec=0 True Az=153.225 Ze=8.97 Az status=0009 Ze status=0009 13:21:41 Check angles 13:21:41 SkyScan query 13:21:42 SkyScan query done: ret=0 az=135.81<-9054 ze=-11.955<-12797 Statuses=0009 0009 13:21:42 Msec=750 True Az=135.81 Ze=-11.955 Az status=0009 Ze status=0009 13:21:42 Check angles 13:21:42 SkyScan query 13:21:42 SkyScan query done: ret=0 az=118.29<-7886 ze=-32.925<-14195 Statuses=0009 0009 13:21:42 Msec=1500 True Az=118.29 Ze=-32.925 Az status=0009 Ze status=0009 13:21:43 Check angles 13:21:43 SkyScan query 13:21:43 SkyScan query done: ret=0 az=100.86<-6724 ze=-51.495<-15433 Statuses=0009 0009 13:21:43 Msec=2250 True Az=100.86 Ze=-51.495 Az status=0009 Ze status=0009 13:21:43 Check angles 13:21:43 SkyScan query 13:21:44 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:21:44 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:21:44 Check angles 13:21:44 SkyScan query 13:21:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:21:45 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:21:45 Message to Master queued w/err=0: serial=11099 error=0 13:21:49 Received message from Master: op=Identify serial=11100 13:21:50 Received message from Master: op=Filter serial=11103 13:21:50 Color wheel filter change from 0 to 0 13:21:50 FLIGetFilterPos err=0 currentPosition=0 13:21:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:21:50 Filter is already there-color wheel unchanged 13:21:50 Received message from Master: op=Shutter serial=11104 13:21:50 Shutter LASER close 13:21:50 Received message from Camera: op=State serial=11106 13:21:50 GetSingleValue result=40 Value=cccccccc 13:21:50 SkyScan query 13:21:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:21:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:50 Parameters OK 13:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:50 Set A/D data flow result=40 13:21:50 Set A/D channel type result=40 13:21:50 Set A/D encoding result=40 13:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:50 Set channel filter=0.000000e+000 result=40 13:21:50 Config A/D Result=40 13:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:50 Get A/D filter: -9.255963e+061 result=40 13:21:50 Get A/D value=-858993460 result=40 13:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:21:50 Parameters OK 13:21:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:21:50 Set A/D data flow result=40 13:21:50 Set A/D channel type result=40 13:21:50 Set A/D encoding result=40 13:21:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:21:50 Set channel filter=0.000000e+000 result=40 13:21:50 Config A/D Result=40 13:21:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:21:50 Get A/D filter: -9.255963e+061 result=40 13:21:50 Get A/D value=-858993460 result=40 13:21:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:21:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:21:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:21:50 Aux= 13:21:50 Message to Camera, serial 11106 queued 13:22:21 Received message from Master: op=PointingHead serial=11113 13:22:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:22:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:22:22 Point started: ret=0 13:22:22 point_skyscan result=0 13:22:22 Check angles 13:22:22 SkyScan query 13:22:23 SkyScan query done: ret=0 az=108.795<-7253 ze=-81.105<-17407 Statuses=0009 0009 13:22:23 Msec=0 True Az=108.795 Ze=-81.105 Az status=0009 Ze status=0009 13:22:23 Check angles 13:22:23 SkyScan query 13:22:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.045<-18803 Statuses=0008 0009 13:22:24 Msec=750 True Az=112.995 Ze=-102.045 Az status=0008 Ze status=0009 13:22:24 Check angles 13:22:24 SkyScan query 13:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 13:22:25 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 13:22:25 Check angles 13:22:25 SkyScan query 13:22:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.94<-21596 Statuses=0008 0009 13:22:25 Msec=2250 True Az=112.995 Ze=-143.94 Az status=0008 Ze status=0009 13:22:25 Check angles 13:22:25 SkyScan query 13:22:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.895<-22993 Statuses=0008 0009 13:22:26 Msec=3000 True Az=112.995 Ze=-164.895 Az status=0008 Ze status=0009 13:22:26 Check angles 13:22:26 SkyScan query 13:22:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:22:27 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:22:27 Message to Master queued w/err=0: serial=11113 error=0 13:22:32 Received message from Master: op=Filter serial=11114 13:22:32 Color wheel filter change from 0 to 0 13:22:32 FLIGetFilterPos err=0 currentPosition=0 13:22:32 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:32 Filter is already there-color wheel unchanged 13:22:32 Received message from Master: op=Shutter serial=11115 13:22:32 Shutter LASER open 13:22:32 Received message from Camera: op=State serial=11117 13:22:32 GetSingleValue result=40 Value=cccccccc 13:22:32 SkyScan query 13:22:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:22:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:33 Parameters OK 13:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:33 Set A/D data flow result=40 13:22:33 Set A/D channel type result=40 13:22:33 Set A/D encoding result=40 13:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:33 Set channel filter=0.000000e+000 result=40 13:22:33 Config A/D Result=40 13:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:33 Get A/D filter: -9.255963e+061 result=40 13:22:33 Get A/D value=-858993460 result=40 13:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:33 Parameters OK 13:22:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:33 Set A/D data flow result=40 13:22:33 Set A/D channel type result=40 13:22:33 Set A/D encoding result=40 13:22:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:33 Set channel filter=0.000000e+000 result=40 13:22:33 Config A/D Result=40 13:22:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:33 Get A/D filter: -9.255963e+061 result=40 13:22:33 Get A/D value=-858993460 result=40 13:22:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:33 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:33 Aux= 13:22:33 Message to Camera, serial 11117 queued 13:22:35 Received message from Master: op=Shutter serial=11121 13:22:35 Shutter LASER close 13:22:36 Received message from Master: op=PointingHead serial=11125 13:22:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:22:36 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:22:36 Point started: ret=0 13:22:36 point_skyscan result=0 13:22:37 Check angles 13:22:37 SkyScan query 13:22:37 SkyScan query done: ret=0 az=89.91<-5994 ze=157.245<-1517 Statuses=0009 0009 13:22:37 Msec=0 True Az=89.91 Ze=157.245 Az status=0009 Ze status=0009 13:22:37 Check angles 13:22:37 SkyScan query 13:22:38 SkyScan query done: ret=0 az=72.015<-4801 ze=135.84<-2944 Statuses=0009 0009 13:22:38 Msec=750 True Az=72.015 Ze=135.84 Az status=0009 Ze status=0009 13:22:38 Check angles 13:22:38 SkyScan query 13:22:39 SkyScan query done: ret=0 az=54.735<-3649 ze=114.9<-4340 Statuses=0009 0009 13:22:39 Msec=1500 True Az=54.735 Ze=114.9 Az status=0009 Ze status=0009 13:22:39 Check angles 13:22:39 SkyScan query 13:22:40 SkyScan query done: ret=0 az=40.86<-2724 ze=93.93<-5738 Statuses=0009 0009 13:22:40 Msec=2250 True Az=40.86 Ze=93.93 Az status=0009 Ze status=0009 13:22:40 Check angles 13:22:40 SkyScan query 13:22:40 SkyScan query done: ret=0 az=40.995<-2733 ze=72.54<-7164 Statuses=0008 0009 13:22:40 Msec=3000 True Az=40.995 Ze=72.54 Az status=0008 Ze status=0009 13:22:40 Check angles 13:22:40 SkyScan query 13:22:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.305<-8513 Statuses=0008 0009 13:22:41 Msec=3750 True Az=40.995 Ze=52.305 Az status=0008 Ze status=0009 13:22:41 Check angles 13:22:41 SkyScan query 13:22:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:22:42 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:22:42 Message to Master queued w/err=0: serial=11125 error=0 13:22:47 Received message from Master: op=Filter serial=11126 13:22:47 Color wheel filter change from 0 to 0 13:22:47 FLIGetFilterPos err=0 currentPosition=0 13:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:22:47 Filter is already there-color wheel unchanged 13:22:47 Received message from Master: op=Shutter serial=11127 13:22:47 Shutter LASER close 13:22:47 Received message from Camera: op=State serial=11129 13:22:47 GetSingleValue result=40 Value=cccccccc 13:22:47 SkyScan query 13:22:48 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:48 Parameters OK 13:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:48 Set A/D data flow result=40 13:22:48 Set A/D channel type result=40 13:22:48 Set A/D encoding result=40 13:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:48 Set channel filter=0.000000e+000 result=40 13:22:48 Config A/D Result=40 13:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:48 Get A/D filter: -9.255963e+061 result=40 13:22:48 Get A/D value=-858993460 result=40 13:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:22:48 Parameters OK 13:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:22:48 Set A/D data flow result=40 13:22:48 Set A/D channel type result=40 13:22:48 Set A/D encoding result=40 13:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:22:48 Set channel filter=0.000000e+000 result=40 13:22:48 Config A/D Result=40 13:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:22:48 Get A/D filter: -9.255963e+061 result=40 13:22:48 Get A/D value=-858993460 result=40 13:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:22:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:22:48 Aux= 13:22:48 Message to Camera, serial 11129 queued 13:23:19 Received message from Master: op=PointingHead serial=11136 13:23:19 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:23:19 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:23:19 Point started: ret=0 13:23:19 point_skyscan result=0 13:23:20 Check angles 13:23:20 SkyScan query 13:23:20 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 13:23:20 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 13:23:20 Check angles 13:23:20 SkyScan query 13:23:21 SkyScan query done: ret=0 az=81.465<-5431 ze=66.495<-7567 Statuses=0009 0008 13:23:21 Msec=750 True Az=81.465 Ze=66.495 Az status=0009 Ze status=0008 13:23:21 Check angles 13:23:21 SkyScan query 13:23:22 SkyScan query done: ret=0 az=99.39<-6626 ze=66.495<-7567 Statuses=0009 0008 13:23:22 Msec=1500 True Az=99.39 Ze=66.495 Az status=0009 Ze status=0008 13:23:22 Check angles 13:23:22 SkyScan query 13:23:22 SkyScan query done: ret=0 az=117.165<-7811 ze=66.495<-7567 Statuses=0009 0008 13:23:22 Msec=2250 True Az=117.165 Ze=66.495 Az status=0009 Ze status=0008 13:23:23 Check angles 13:23:23 SkyScan query 13:23:23 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 13:23:23 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 13:23:23 Check angles 13:23:23 SkyScan query 13:23:24 SkyScan query done: ret=0 az=151.935<-10129 ze=66.495<-7567 Statuses=0009 0008 13:23:24 Msec=3750 True Az=151.935 Ze=66.495 Az status=0009 Ze status=0008 13:23:24 Check angles 13:23:24 SkyScan query 13:23:25 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:23:25 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:23:25 Message to Master queued w/err=0: serial=11136 error=0 13:23:30 Received message from Master: op=Filter serial=11137 13:23:30 Color wheel filter change from 0 to 0 13:23:30 FLIGetFilterPos err=0 currentPosition=0 13:23:30 FLIGetStepsRemaining err=0 RemainingSteps=0 13:23:30 Filter is already there-color wheel unchanged 13:23:30 Received message from Master: op=Shutter serial=11138 13:23:30 Shutter LASER close 13:23:30 Received message from Camera: op=State serial=11140 13:23:30 GetSingleValue result=40 Value=cccccccc 13:23:30 SkyScan query 13:23:31 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:23:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:31 Parameters OK 13:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:31 Set A/D data flow result=40 13:23:31 Set A/D channel type result=40 13:23:31 Set A/D encoding result=40 13:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:31 Set channel filter=0.000000e+000 result=40 13:23:31 Config A/D Result=40 13:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:31 Get A/D filter: -9.255963e+061 result=40 13:23:31 Get A/D value=-858993460 result=40 13:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:23:31 Parameters OK 13:23:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:23:31 Set A/D data flow result=40 13:23:31 Set A/D channel type result=40 13:23:31 Set A/D encoding result=40 13:23:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:23:31 Set channel filter=0.000000e+000 result=40 13:23:31 Config A/D Result=40 13:23:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:23:31 Get A/D filter: -9.255963e+061 result=40 13:23:31 Get A/D value=-858993460 result=40 13:23:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:23:31 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:23:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:23:31 Aux= 13:23:31 Message to Camera, serial 11140 queued 13:24:01 Received message from Master: op=PointingHead serial=11147 13:24:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:24:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:24:02 Point started: ret=0 13:24:02 point_skyscan result=0 13:24:02 Check angles 13:24:02 SkyScan query 13:24:03 SkyScan query done: ret=0 az=135.03<-9002 ze=36.72<-9552 Statuses=0009 0009 13:24:03 Msec=0 True Az=135.03 Ze=36.72 Az status=0009 Ze status=0009 13:24:03 Check angles 13:24:03 SkyScan query 13:24:04 SkyScan query done: ret=0 az=117.525<-7835 ze=15.765<-10949 Statuses=0009 0009 13:24:04 Msec=750 True Az=117.525 Ze=15.765 Az status=0009 Ze status=0009 13:24:04 Check angles 13:24:04 SkyScan query 13:24:05 SkyScan query done: ret=0 az=100.2<-6680 ze=-5.175<-12345 Statuses=0009 0009 13:24:05 Msec=1500 True Az=100.2 Ze=-5.175 Az status=0009 Ze status=0009 13:24:05 Check angles 13:24:05 SkyScan query 13:24:05 SkyScan query done: ret=0 az=82.68<-5512 ze=-26.175<-13745 Statuses=0009 0009 13:24:05 Msec=2250 True Az=82.68 Ze=-26.175 Az status=0009 Ze status=0009 13:24:05 Check angles 13:24:05 SkyScan query 13:24:06 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.565<-14571 Statuses=0009 0008 13:24:06 Msec=3000 True Az=65.16 Ze=-38.565 Az status=0009 Ze status=0008 13:24:06 Check angles 13:24:06 SkyScan query 13:24:07 SkyScan query done: ret=0 az=47.67<-3178 ze=-38.535<-14569 Statuses=0009 0008 13:24:07 Msec=3750 True Az=47.67 Ze=-38.535 Az status=0009 Ze status=0008 13:24:07 Check angles 13:24:07 SkyScan query 13:24:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:24:08 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:24:08 Message to Master queued w/err=0: serial=11147 error=0 13:24:13 Received message from Master: op=Filter serial=11148 13:24:13 Color wheel filter change from 0 to 0 13:24:13 FLIGetFilterPos err=0 currentPosition=0 13:24:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:13 Filter is already there-color wheel unchanged 13:24:13 Received message from Master: op=Shutter serial=11149 13:24:13 Shutter LASER close 13:24:13 Received message from Camera: op=State serial=11151 13:24:13 GetSingleValue result=40 Value=cccccccc 13:24:13 SkyScan query 13:24:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:24:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:13 Parameters OK 13:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:13 Set A/D data flow result=40 13:24:13 Set A/D channel type result=40 13:24:13 Set A/D encoding result=40 13:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:13 Set channel filter=0.000000e+000 result=40 13:24:13 Config A/D Result=40 13:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:13 Get A/D filter: -9.255963e+061 result=40 13:24:13 Get A/D value=-858993460 result=40 13:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:13 Parameters OK 13:24:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:13 Set A/D data flow result=40 13:24:13 Set A/D channel type result=40 13:24:13 Set A/D encoding result=40 13:24:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:13 Set channel filter=0.000000e+000 result=40 13:24:13 Config A/D Result=40 13:24:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:13 Get A/D filter: -9.255963e+061 result=40 13:24:13 Get A/D value=-858993460 result=40 13:24:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:13 Aux= 13:24:13 Message to Camera, serial 11151 queued 13:24:44 Received message from Master: op=PointingHead serial=11158 13:24:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:24:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:24:45 Point started: ret=0 13:24:45 point_skyscan result=0 13:24:45 Check angles 13:24:45 SkyScan query 13:24:46 SkyScan query done: ret=0 az=63.825<-4255 ze=-68.175<-16545 Statuses=0009 0009 13:24:46 Msec=0 True Az=63.825 Ze=-68.175 Az status=0009 Ze status=0009 13:24:46 Check angles 13:24:46 SkyScan query 13:24:47 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.145<-17943 Statuses=0009 0009 13:24:47 Msec=750 True Az=81.33 Ze=-89.145 Az status=0009 Ze status=0009 13:24:47 Check angles 13:24:47 SkyScan query 13:24:47 SkyScan query done: ret=0 az=98.925<-6595 ze=-110.07<-19338 Statuses=0009 0009 13:24:47 Msec=1500 True Az=98.925 Ze=-110.07 Az status=0009 Ze status=0009 13:24:48 Check angles 13:24:48 SkyScan query 13:24:48 SkyScan query done: ret=0 az=116.34<-7756 ze=-131.04<-20736 Statuses=0009 0009 13:24:48 Msec=2250 True Az=116.34 Ze=-131.04 Az status=0009 Ze status=0009 13:24:48 Check angles 13:24:48 SkyScan query 13:24:49 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 13:24:49 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 13:24:49 Check angles 13:24:49 SkyScan query 13:24:50 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:24:50 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:24:50 Message to Master queued w/err=0: serial=11158 error=0 13:24:55 Received message from Master: op=Filter serial=11159 13:24:55 Color wheel filter change from 0 to 0 13:24:55 FLIGetFilterPos err=0 currentPosition=0 13:24:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:24:55 Filter is already there-color wheel unchanged 13:24:55 Received message from Master: op=Shutter serial=11160 13:24:55 Shutter LASER close 13:24:55 Received message from Camera: op=State serial=11162 13:24:55 GetSingleValue result=40 Value=cccccccc 13:24:55 SkyScan query 13:24:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:24:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:55 Parameters OK 13:24:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:55 Set A/D data flow result=40 13:24:55 Set A/D channel type result=40 13:24:55 Set A/D encoding result=40 13:24:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:55 Set channel filter=0.000000e+000 result=40 13:24:55 Config A/D Result=40 13:24:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:55 Get A/D filter: -9.255963e+061 result=40 13:24:55 Get A/D value=-858993460 result=40 13:24:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:24:55 Parameters OK 13:24:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:24:55 Set A/D data flow result=40 13:24:55 Set A/D channel type result=40 13:24:55 Set A/D encoding result=40 13:24:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:24:55 Set channel filter=0.000000e+000 result=40 13:24:55 Config A/D Result=40 13:24:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:24:55 Get A/D filter: -9.255963e+061 result=40 13:24:55 Get A/D value=-858993460 result=40 13:24:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:24:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:24:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:24:55 Aux= 13:24:55 Message to Camera, serial 11162 queued 13:25:26 Received message from Master: op=PointingHead serial=11169 13:25:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:25:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:25:27 Point started: ret=0 13:25:27 point_skyscan result=0 13:25:28 Check angles 13:25:28 SkyScan query 13:25:28 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.3<-23420 Statuses=0009 0009 13:25:28 Msec=0 True Az=113.025 Ze=-171.3 Az status=0009 Ze status=0009 13:25:28 Check angles 13:25:28 SkyScan query 13:25:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:25:29 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:25:29 Message to Master queued w/err=0: serial=11169 error=0 13:25:34 Received message from Master: op=Filter serial=11170 13:25:34 Color wheel filter change from 0 to 0 13:25:34 FLIGetFilterPos err=0 currentPosition=0 13:25:34 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:34 Filter is already there-color wheel unchanged 13:25:34 Received message from Master: op=Shutter serial=11171 13:25:34 Shutter LASER open 13:25:34 Received message from Camera: op=State serial=11173 13:25:34 GetSingleValue result=40 Value=cccccccc 13:25:34 SkyScan query 13:25:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:25:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:35 Parameters OK 13:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:35 Set A/D data flow result=40 13:25:35 Set A/D channel type result=40 13:25:35 Set A/D encoding result=40 13:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:35 Set channel filter=0.000000e+000 result=40 13:25:35 Config A/D Result=40 13:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:35 Get A/D filter: -9.255963e+061 result=40 13:25:35 Get A/D value=-858993460 result=40 13:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:35 Parameters OK 13:25:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:35 Set A/D data flow result=40 13:25:35 Set A/D channel type result=40 13:25:35 Set A/D encoding result=40 13:25:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:35 Set channel filter=0.000000e+000 result=40 13:25:35 Config A/D Result=40 13:25:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:35 Get A/D filter: -9.255963e+061 result=40 13:25:35 Get A/D value=-858993460 result=40 13:25:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:35 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:35 Aux= 13:25:35 Message to Camera, serial 11173 queued 13:25:37 Received message from Master: op=Shutter serial=11177 13:25:37 Shutter LASER close 13:25:38 Received message from Master: op=PointingHead serial=11181 13:25:38 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:25:38 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:25:38 Point started: ret=0 13:25:38 point_skyscan result=0 13:25:39 Check angles 13:25:39 SkyScan query 13:25:40 SkyScan query done: ret=0 az=135.96<-9064 ze=-143.475<-21565 Statuses=0009 0009 13:25:40 Msec=0 True Az=135.96 Ze=-143.475 Az status=0009 Ze status=0009 13:25:40 Check angles 13:25:40 SkyScan query 13:25:40 SkyScan query done: ret=0 az=153.48<-10232 ze=-122.52<-20168 Statuses=0009 0009 13:25:40 Msec=750 True Az=153.48 Ze=-122.52 Az status=0009 Ze status=0009 13:25:40 Check angles 13:25:40 SkyScan query 13:25:41 SkyScan query done: ret=0 az=170.88<-11392 ze=-101.55<-18770 Statuses=0009 0009 13:25:41 Msec=1500 True Az=170.88 Ze=-101.55 Az status=0009 Ze status=0009 13:25:41 Check angles 13:25:41 SkyScan query 13:25:42 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.175<-17345 Statuses=0008 0009 13:25:42 Msec=2250 True Az=176.025 Ze=-80.175 Az status=0008 Ze status=0009 13:25:42 Check angles 13:25:42 SkyScan query 13:25:43 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.22<-15948 Statuses=0008 0009 13:25:43 Msec=3000 True Az=176.01 Ze=-59.22 Az status=0008 Ze status=0009 13:25:43 Check angles 13:25:43 SkyScan query 13:25:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:25:43 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:25:43 Message to Master queued w/err=0: serial=11181 error=0 13:25:48 Received message from Master: op=Filter serial=11182 13:25:48 Color wheel filter change from 0 to 0 13:25:48 FLIGetFilterPos err=0 currentPosition=0 13:25:48 FLIGetStepsRemaining err=0 RemainingSteps=0 13:25:48 Filter is already there-color wheel unchanged 13:25:48 Received message from Master: op=Shutter serial=11183 13:25:48 Shutter LASER close 13:25:49 Received message from Camera: op=State serial=11185 13:25:49 GetSingleValue result=40 Value=cccccccc 13:25:49 SkyScan query 13:25:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:25:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:49 Parameters OK 13:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:49 Set A/D data flow result=40 13:25:49 Set A/D channel type result=40 13:25:49 Set A/D encoding result=40 13:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:49 Set channel filter=0.000000e+000 result=40 13:25:49 Config A/D Result=40 13:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:49 Get A/D filter: -9.255963e+061 result=40 13:25:49 Get A/D value=-858993460 result=40 13:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:25:49 Parameters OK 13:25:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:25:49 Set A/D data flow result=40 13:25:49 Set A/D channel type result=40 13:25:49 Set A/D encoding result=40 13:25:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:25:49 Set channel filter=0.000000e+000 result=40 13:25:49 Config A/D Result=40 13:25:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:25:49 Get A/D filter: -9.255963e+061 result=40 13:25:49 Get A/D value=-858993460 result=40 13:25:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:25:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:25:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:25:49 Aux= 13:25:49 Message to Camera, serial 11185 queued 13:26:20 Received message from Master: op=PointingHead serial=11192 13:26:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:26:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:26:20 Point started: ret=0 13:26:20 point_skyscan result=0 13:26:21 Check angles 13:26:21 SkyScan query 13:26:22 SkyScan query done: ret=0 az=152.805<-10187 ze=-21.54<-13436 Statuses=0009 0009 13:26:22 Msec=0 True Az=152.805 Ze=-21.54 Az status=0009 Ze status=0009 13:26:22 Check angles 13:26:22 SkyScan query 13:26:22 SkyScan query done: ret=0 az=135<-9000 ze=-0.135<-12009 Statuses=0009 0009 13:26:22 Msec=750 True Az=135 Ze=-0.135 Az status=0009 Ze status=0009 13:26:23 Check angles 13:26:23 SkyScan query 13:26:23 SkyScan query done: ret=0 az=117.495<-7833 ze=20.805<-10613 Statuses=0009 0009 13:26:23 Msec=1500 True Az=117.495 Ze=20.805 Az status=0009 Ze status=0009 13:26:23 Check angles 13:26:23 SkyScan query 13:26:24 SkyScan query done: ret=0 az=100.11<-6674 ze=41.775<-9215 Statuses=0009 0009 13:26:24 Msec=2250 True Az=100.11 Ze=41.775 Az status=0009 Ze status=0009 13:26:24 Check angles 13:26:24 SkyScan query 13:26:25 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 13:26:25 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 13:26:25 Check angles 13:26:25 SkyScan query 13:26:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:26:26 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:26:26 Message to Master queued w/err=0: serial=11192 error=0 13:26:31 Received message from Master: op=Filter serial=11193 13:26:31 Color wheel filter change from 0 to 0 13:26:31 FLIGetFilterPos err=0 currentPosition=0 13:26:31 FLIGetStepsRemaining err=0 RemainingSteps=0 13:26:31 Filter is already there-color wheel unchanged 13:26:31 Received message from Master: op=Shutter serial=11194 13:26:31 Shutter LASER close 13:26:31 Received message from Camera: op=State serial=11196 13:26:31 GetSingleValue result=40 Value=cccccccc 13:26:31 SkyScan query 13:26:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:26:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:31 Parameters OK 13:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:31 Set A/D data flow result=40 13:26:31 Set A/D channel type result=40 13:26:31 Set A/D encoding result=40 13:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:31 Set channel filter=0.000000e+000 result=40 13:26:31 Config A/D Result=40 13:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:31 Get A/D filter: -9.255963e+061 result=40 13:26:31 Get A/D value=-858993460 result=40 13:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:26:31 Parameters OK 13:26:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:26:31 Set A/D data flow result=40 13:26:31 Set A/D channel type result=40 13:26:31 Set A/D encoding result=40 13:26:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:26:31 Set channel filter=0.000000e+000 result=40 13:26:31 Config A/D Result=40 13:26:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:26:31 Get A/D filter: -9.255963e+061 result=40 13:26:31 Get A/D value=-858993460 result=40 13:26:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:26:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:26:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:26:31 Aux= 13:26:31 Message to Camera, serial 11196 queued 13:27:02 Received message from Master: op=PointingHead serial=11203 13:27:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:27:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:27:02 Point started: ret=0 13:27:02 point_skyscan result=0 13:27:03 Check angles 13:27:03 SkyScan query 13:27:04 SkyScan query done: ret=0 az=108.75<-7250 ze=38.49<-9434 Statuses=0009 0008 13:27:04 Msec=0 True Az=108.75 Ze=38.49 Az status=0009 Ze status=0008 13:27:04 Check angles 13:27:04 SkyScan query 13:27:05 SkyScan query done: ret=0 az=126.24<-8416 ze=38.505<-9433 Statuses=0009 0008 13:27:05 Msec=750 True Az=126.24 Ze=38.505 Az status=0009 Ze status=0008 13:27:05 Check angles 13:27:05 SkyScan query 13:27:05 SkyScan query done: ret=0 az=143.79<-9586 ze=38.505<-9433 Statuses=0009 0008 13:27:05 Msec=1500 True Az=143.79 Ze=38.505 Az status=0009 Ze status=0008 13:27:06 Check angles 13:27:06 SkyScan query 13:27:06 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 13:27:06 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 13:27:06 Check angles 13:27:06 SkyScan query 13:27:07 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:27:07 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:27:07 Check angles 13:27:07 SkyScan query 13:27:08 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:27:08 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:27:08 Message to Master queued w/err=0: serial=11203 error=0 13:27:13 Received message from Master: op=Filter serial=11204 13:27:13 Color wheel filter change from 0 to 0 13:27:13 FLIGetFilterPos err=0 currentPosition=0 13:27:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:13 Filter is already there-color wheel unchanged 13:27:13 Received message from Master: op=Shutter serial=11205 13:27:13 Shutter LASER close 13:27:13 Received message from Camera: op=State serial=11207 13:27:13 GetSingleValue result=40 Value=cccccccc 13:27:13 SkyScan query 13:27:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:27:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:13 Parameters OK 13:27:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:13 Set A/D data flow result=40 13:27:13 Set A/D channel type result=40 13:27:13 Set A/D encoding result=40 13:27:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:13 Set channel filter=0.000000e+000 result=40 13:27:13 Config A/D Result=40 13:27:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:13 Get A/D filter: -9.255963e+061 result=40 13:27:13 Get A/D value=-858993460 result=40 13:27:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:13 Parameters OK 13:27:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:13 Set A/D data flow result=40 13:27:13 Set A/D channel type result=40 13:27:13 Set A/D encoding result=40 13:27:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:13 Set channel filter=0.000000e+000 result=40 13:27:13 Config A/D Result=40 13:27:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:13 Get A/D filter: -9.255963e+061 result=40 13:27:13 Get A/D value=-858993460 result=40 13:27:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:13 Aux= 13:27:13 Message to Camera, serial 11207 queued 13:27:44 Received message from Master: op=PointingHead serial=11214 13:27:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:27:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:27:45 Point started: ret=0 13:27:45 point_skyscan result=0 13:27:45 Check angles 13:27:45 SkyScan query 13:27:46 SkyScan query done: ret=0 az=152.925<-10195 ze=8.565<-11429 Statuses=0009 0009 13:27:46 Msec=0 True Az=152.925 Ze=8.565 Az status=0009 Ze status=0009 13:27:46 Check angles 13:27:46 SkyScan query 13:27:47 SkyScan query done: ret=0 az=135.12<-9008 ze=-12.825<-12855 Statuses=0009 0009 13:27:47 Msec=750 True Az=135.12 Ze=-12.825 Az status=0009 Ze status=0009 13:27:47 Check angles 13:27:47 SkyScan query 13:27:47 SkyScan query done: ret=0 az=117.09<-7806 ze=-34.2<-14280 Statuses=0009 0009 13:27:47 Msec=1500 True Az=117.09 Ze=-34.2 Az status=0009 Ze status=0009 13:27:48 Check angles 13:27:48 SkyScan query 13:27:48 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.555<-15437 Statuses=0009 0009 13:27:48 Msec=2250 True Az=99.825 Ze=-51.555 Az status=0009 Ze status=0009 13:27:48 Check angles 13:27:48 SkyScan query 13:27:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 13:27:49 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 13:27:49 Check angles 13:27:49 SkyScan query 13:27:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:27:50 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:27:50 Message to Master queued w/err=0: serial=11214 error=0 13:27:55 Received message from Master: op=Filter serial=11215 13:27:55 Color wheel filter change from 0 to 0 13:27:55 FLIGetFilterPos err=0 currentPosition=0 13:27:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:27:55 Filter is already there-color wheel unchanged 13:27:55 Received message from Master: op=Shutter serial=11216 13:27:55 Shutter LASER close 13:27:55 Received message from Camera: op=State serial=11218 13:27:55 GetSingleValue result=40 Value=cccccccc 13:27:55 SkyScan query 13:27:56 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:27:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:56 Parameters OK 13:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:56 Set A/D data flow result=40 13:27:56 Set A/D channel type result=40 13:27:56 Set A/D encoding result=40 13:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:56 Set channel filter=0.000000e+000 result=40 13:27:56 Config A/D Result=40 13:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:56 Get A/D filter: -9.255963e+061 result=40 13:27:56 Get A/D value=-858993460 result=40 13:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:27:56 Parameters OK 13:27:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:27:56 Set A/D data flow result=40 13:27:56 Set A/D channel type result=40 13:27:56 Set A/D encoding result=40 13:27:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:27:56 Set channel filter=0.000000e+000 result=40 13:27:56 Config A/D Result=40 13:27:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:27:56 Get A/D filter: -9.255963e+061 result=40 13:27:56 Get A/D value=-858993460 result=40 13:27:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:27:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:27:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:27:56 Aux= 13:27:56 Message to Camera, serial 11218 queued 13:28:26 Received message from Master: op=PointingHead serial=11225 13:28:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:28:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:28:27 Point started: ret=0 13:28:27 point_skyscan result=0 13:28:28 Check angles 13:28:28 SkyScan query 13:28:28 SkyScan query done: ret=0 az=109.185<-7279 ze=-81.57<-17438 Statuses=0009 0009 13:28:28 Msec=0 True Az=109.185 Ze=-81.57 Az status=0009 Ze status=0009 13:28:28 Check angles 13:28:28 SkyScan query 13:28:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 13:28:29 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 13:28:29 Check angles 13:28:29 SkyScan query 13:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 13:28:30 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 13:28:30 Check angles 13:28:30 SkyScan query 13:28:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.9<-21660 Statuses=0008 0009 13:28:30 Msec=2250 True Az=112.995 Ze=-144.9 Az status=0008 Ze status=0009 13:28:31 Check angles 13:28:31 SkyScan query 13:28:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 13:28:31 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 13:28:31 Check angles 13:28:31 SkyScan query 13:28:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:28:32 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:28:32 Message to Master queued w/err=0: serial=11225 error=0 13:28:37 Received message from Master: op=Filter serial=11226 13:28:37 Color wheel filter change from 0 to 0 13:28:37 FLIGetFilterPos err=0 currentPosition=0 13:28:37 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:37 Filter is already there-color wheel unchanged 13:28:37 Received message from Master: op=Shutter serial=11227 13:28:37 Shutter LASER open 13:28:37 Received message from Camera: op=State serial=11229 13:28:37 GetSingleValue result=40 Value=cccccccc 13:28:37 SkyScan query 13:28:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:28:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:38 Parameters OK 13:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:38 Set A/D data flow result=40 13:28:38 Set A/D channel type result=40 13:28:38 Set A/D encoding result=40 13:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:38 Set channel filter=0.000000e+000 result=40 13:28:38 Config A/D Result=40 13:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:38 Get A/D filter: -9.255963e+061 result=40 13:28:38 Get A/D value=-858993460 result=40 13:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:38 Parameters OK 13:28:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:38 Set A/D data flow result=40 13:28:38 Set A/D channel type result=40 13:28:38 Set A/D encoding result=40 13:28:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:38 Set channel filter=0.000000e+000 result=40 13:28:38 Config A/D Result=40 13:28:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:38 Get A/D filter: -9.255963e+061 result=40 13:28:38 Get A/D value=-858993460 result=40 13:28:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:38 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:38 Aux= 13:28:38 Message to Camera, serial 11229 queued 13:28:40 Received message from Master: op=Shutter serial=11233 13:28:40 Shutter LASER close 13:28:41 Received message from Master: op=PointingHead serial=11237 13:28:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:28:41 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:28:41 Point started: ret=0 13:28:41 point_skyscan result=0 13:28:42 Check angles 13:28:42 SkyScan query 13:28:42 SkyScan query done: ret=0 az=89.85<-5990 ze=157.035<-1531 Statuses=0009 0009 13:28:42 Msec=0 True Az=89.85 Ze=157.035 Az status=0009 Ze status=0009 13:28:43 Check angles 13:28:43 SkyScan query 13:28:43 SkyScan query done: ret=0 az=71.97<-4798 ze=135.72<-2952 Statuses=0009 0009 13:28:43 Msec=750 True Az=71.97 Ze=135.72 Az status=0009 Ze status=0009 13:28:43 Check angles 13:28:43 SkyScan query 13:28:44 SkyScan query done: ret=0 az=54.675<-3645 ze=114.78<-4348 Statuses=0009 0009 13:28:44 Msec=1500 True Az=54.675 Ze=114.78 Az status=0009 Ze status=0009 13:28:44 Check angles 13:28:44 SkyScan query 13:28:45 SkyScan query done: ret=0 az=40.875<-2725 ze=93.84<-5744 Statuses=0009 0009 13:28:45 Msec=2250 True Az=40.875 Ze=93.84 Az status=0009 Ze status=0009 13:28:45 Check angles 13:28:45 SkyScan query 13:28:45 SkyScan query done: ret=0 az=41.01<-2734 ze=72.87<-7142 Statuses=0008 0009 13:28:45 Msec=3000 True Az=41.01 Ze=72.87 Az status=0008 Ze status=0009 13:28:46 Check angles 13:28:46 SkyScan query 13:28:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 13:28:46 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 13:28:46 Check angles 13:28:46 SkyScan query 13:28:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:28:47 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:28:47 Message to Master queued w/err=0: serial=11237 error=0 13:28:52 Received message from Master: op=Filter serial=11238 13:28:52 Color wheel filter change from 0 to 0 13:28:52 FLIGetFilterPos err=0 currentPosition=0 13:28:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:28:52 Filter is already there-color wheel unchanged 13:28:52 Received message from Master: op=Shutter serial=11239 13:28:52 Shutter LASER close 13:28:52 Received message from Camera: op=State serial=11241 13:28:52 GetSingleValue result=40 Value=cccccccc 13:28:52 SkyScan query 13:28:53 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:28:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:53 Parameters OK 13:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:53 Set A/D data flow result=40 13:28:53 Set A/D channel type result=40 13:28:53 Set A/D encoding result=40 13:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:53 Set channel filter=0.000000e+000 result=40 13:28:53 Config A/D Result=40 13:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:53 Get A/D filter: -9.255963e+061 result=40 13:28:53 Get A/D value=-858993460 result=40 13:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:28:53 Parameters OK 13:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:28:53 Set A/D data flow result=40 13:28:53 Set A/D channel type result=40 13:28:53 Set A/D encoding result=40 13:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:28:53 Set channel filter=0.000000e+000 result=40 13:28:53 Config A/D Result=40 13:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:28:53 Get A/D filter: -9.255963e+061 result=40 13:28:53 Get A/D value=-858993460 result=40 13:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:28:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:28:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:28:53 Aux= 13:28:53 Message to Camera, serial 11241 queued 13:29:24 Received message from Master: op=PointingHead serial=11248 13:29:24 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:29:24 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:29:24 Point started: ret=0 13:29:24 point_skyscan result=0 13:29:25 Check angles 13:29:25 SkyScan query 13:29:25 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 13:29:25 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 13:29:26 Check angles 13:29:26 SkyScan query 13:29:26 SkyScan query done: ret=0 az=81.495<-5433 ze=66.51<-7566 Statuses=0009 0008 13:29:26 Msec=750 True Az=81.495 Ze=66.51 Az status=0009 Ze status=0008 13:29:26 Check angles 13:29:26 SkyScan query 13:29:27 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 13:29:27 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 [UTC 2018-12-4 13:29:27] 13:29:27 Check angles 13:29:27 SkyScan query 13:29:28 SkyScan query done: ret=0 az=118.275<-7885 ze=66.495<-7567 Statuses=0009 0008 13:29:28 Msec=2250 True Az=118.275 Ze=66.495 Az status=0009 Ze status=0008 13:29:28 Check angles 13:29:28 SkyScan query 13:29:28 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 13:29:28 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 13:29:29 Check angles 13:29:29 SkyScan query 13:29:29 SkyScan query done: ret=0 az=151.755<-10117 ze=66.495<-7567 Statuses=0009 0008 13:29:29 Msec=3750 True Az=151.755 Ze=66.495 Az status=0009 Ze status=0008 13:29:29 Check angles 13:29:29 SkyScan query 13:29:30 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:29:30 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:29:30 Message to Master queued w/err=0: serial=11248 error=0 13:29:35 Received message from Master: op=Filter serial=11249 13:29:35 Color wheel filter change from 0 to 0 13:29:35 FLIGetFilterPos err=0 currentPosition=0 13:29:35 FLIGetStepsRemaining err=0 RemainingSteps=0 13:29:35 Filter is already there-color wheel unchanged 13:29:35 Received message from Master: op=Shutter serial=11250 13:29:35 Shutter LASER close 13:29:35 Received message from Camera: op=State serial=11252 13:29:35 GetSingleValue result=40 Value=cccccccc 13:29:35 SkyScan query 13:29:36 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:29:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:36 Parameters OK 13:29:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:36 Set A/D data flow result=40 13:29:36 Set A/D channel type result=40 13:29:36 Set A/D encoding result=40 13:29:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:36 Set channel filter=0.000000e+000 result=40 13:29:36 Config A/D Result=40 13:29:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:36 Get A/D filter: -9.255963e+061 result=40 13:29:36 Get A/D value=-858993460 result=40 13:29:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:29:36 Parameters OK 13:29:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:29:36 Set A/D data flow result=40 13:29:36 Set A/D channel type result=40 13:29:36 Set A/D encoding result=40 13:29:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:29:36 Set channel filter=0.000000e+000 result=40 13:29:36 Config A/D Result=40 13:29:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:29:36 Get A/D filter: -9.255963e+061 result=40 13:29:36 Get A/D value=-858993460 result=40 13:29:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:29:36 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:29:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:29:36 Aux= 13:29:36 Message to Camera, serial 11252 queued 13:30:06 Received message from Master: op=PointingHead serial=11259 13:30:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:30:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:30:07 Point started: ret=0 13:30:07 point_skyscan result=0 13:30:08 Check angles 13:30:08 SkyScan query 13:30:08 SkyScan query done: ret=0 az=134.865<-8991 ze=36.57<-9562 Statuses=0009 0009 13:30:08 Msec=0 True Az=134.865 Ze=36.57 Az status=0009 Ze status=0009 13:30:08 Check angles 13:30:08 SkyScan query 13:30:09 SkyScan query done: ret=0 az=117.285<-7819 ze=15.615<-10959 Statuses=0009 0009 13:30:09 Msec=750 True Az=117.285 Ze=15.615 Az status=0009 Ze status=0009 13:30:09 Check angles 13:30:09 SkyScan query 13:30:10 SkyScan query done: ret=0 az=100.02<-6668 ze=-5.34<-12356 Statuses=0009 0009 13:30:10 Msec=1500 True Az=100.02 Ze=-5.34 Az status=0009 Ze status=0009 13:30:10 Check angles 13:30:10 SkyScan query 13:30:10 SkyScan query done: ret=0 az=82.545<-5503 ze=-26.325<-13755 Statuses=0009 0009 13:30:10 Msec=2250 True Az=82.545 Ze=-26.325 Az status=0009 Ze status=0009 13:30:11 Check angles 13:30:11 SkyScan query 13:30:11 SkyScan query done: ret=0 az=65.025<-4335 ze=-38.565<-14571 Statuses=0009 0008 13:30:11 Msec=3000 True Az=65.025 Ze=-38.565 Az status=0009 Ze status=0008 13:30:11 Check angles 13:30:11 SkyScan query 13:30:12 SkyScan query done: ret=0 az=47.565<-3171 ze=-38.535<-14569 Statuses=0009 0008 13:30:12 Msec=3750 True Az=47.565 Ze=-38.535 Az status=0009 Ze status=0008 13:30:12 Check angles 13:30:12 SkyScan query 13:30:13 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:30:13 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:30:13 Message to Master queued w/err=0: serial=11259 error=0 13:30:18 Received message from Master: op=Filter serial=11260 13:30:18 Color wheel filter change from 0 to 0 13:30:18 FLIGetFilterPos err=0 currentPosition=0 13:30:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:30:18 Filter is already there-color wheel unchanged 13:30:18 Received message from Master: op=Shutter serial=11261 13:30:18 Shutter LASER close 13:30:18 Received message from Camera: op=State serial=11263 13:30:18 GetSingleValue result=40 Value=cccccccc 13:30:18 SkyScan query 13:30:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:30:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:18 Parameters OK 13:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:18 Set A/D data flow result=40 13:30:18 Set A/D channel type result=40 13:30:18 Set A/D encoding result=40 13:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:18 Set channel filter=0.000000e+000 result=40 13:30:18 Config A/D Result=40 13:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:18 Get A/D filter: -9.255963e+061 result=40 13:30:18 Get A/D value=-858993460 result=40 13:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:30:18 Parameters OK 13:30:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:30:18 Set A/D data flow result=40 13:30:18 Set A/D channel type result=40 13:30:18 Set A/D encoding result=40 13:30:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:30:18 Set channel filter=0.000000e+000 result=40 13:30:18 Config A/D Result=40 13:30:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:30:18 Get A/D filter: -9.255963e+061 result=40 13:30:18 Get A/D value=-858993460 result=40 13:30:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:30:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:30:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:30:18 Aux= 13:30:18 Message to Camera, serial 11263 queued 13:30:49 Received message from Master: op=PointingHead serial=11270 13:30:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:30:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:30:50 Point started: ret=0 13:30:50 point_skyscan result=0 13:30:50 Check angles 13:30:50 SkyScan query 13:30:51 SkyScan query done: ret=0 az=63.78<-4252 ze=-68.16<-16544 Statuses=0009 0009 13:30:51 Msec=0 True Az=63.78 Ze=-68.16 Az status=0009 Ze status=0009 13:30:51 Check angles 13:30:51 SkyScan query 13:30:52 SkyScan query done: ret=0 az=81.195<-5413 ze=-89.115<-17941 Statuses=0009 0009 13:30:52 Msec=750 True Az=81.195 Ze=-89.115 Az status=0009 Ze status=0009 13:30:52 Check angles 13:30:52 SkyScan query 13:30:53 SkyScan query done: ret=0 az=98.94<-6596 ze=-110.055<-19337 Statuses=0009 0009 13:30:53 Msec=1500 True Az=98.94 Ze=-110.055 Az status=0009 Ze status=0009 13:30:53 Check angles 13:30:53 SkyScan query 13:30:53 SkyScan query done: ret=0 az=116.325<-7755 ze=-131.025<-20735 Statuses=0009 0009 13:30:53 Msec=2250 True Az=116.325 Ze=-131.025 Az status=0009 Ze status=0009 13:30:53 Check angles 13:30:53 SkyScan query 13:30:54 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 13:30:54 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 13:30:54 Check angles 13:30:54 SkyScan query 13:30:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:30:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:30:55 Message to Master queued w/err=0: serial=11270 error=0 13:31:00 Received message from Master: op=Filter serial=11271 13:31:00 Color wheel filter change from 0 to 0 13:31:00 FLIGetFilterPos err=0 currentPosition=0 13:31:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:00 Filter is already there-color wheel unchanged 13:31:00 Received message from Master: op=Shutter serial=11272 13:31:00 Shutter LASER close 13:31:00 Received message from Camera: op=State serial=11274 13:31:00 GetSingleValue result=40 Value=cccccccc 13:31:00 SkyScan query 13:31:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:31:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:01 Parameters OK 13:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:01 Set A/D data flow result=40 13:31:01 Set A/D channel type result=40 13:31:01 Set A/D encoding result=40 13:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:01 Set channel filter=0.000000e+000 result=40 13:31:01 Config A/D Result=40 13:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:01 Get A/D filter: -9.255963e+061 result=40 13:31:01 Get A/D value=-858993460 result=40 13:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:01 Parameters OK 13:31:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:01 Set A/D data flow result=40 13:31:01 Set A/D channel type result=40 13:31:01 Set A/D encoding result=40 13:31:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:01 Set channel filter=0.000000e+000 result=40 13:31:01 Config A/D Result=40 13:31:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:01 Get A/D filter: -9.255963e+061 result=40 13:31:01 Get A/D value=-858993460 result=40 13:31:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:01 Aux= 13:31:01 Message to Camera, serial 11274 queued 13:31:31 Received message from Master: op=PointingHead serial=11281 13:31:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:31:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:31:32 Point started: ret=0 13:31:32 point_skyscan result=0 13:31:33 Check angles 13:31:33 SkyScan query 13:31:33 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.255<-23417 Statuses=0009 0009 13:31:33 Msec=0 True Az=113.025 Ze=-171.255 Az status=0009 Ze status=0009 13:31:33 Check angles 13:31:33 SkyScan query 13:31:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:31:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:31:34 Message to Master queued w/err=0: serial=11281 error=0 13:31:39 Received message from Master: op=Filter serial=11282 13:31:39 Color wheel filter change from 0 to 0 13:31:39 FLIGetFilterPos err=0 currentPosition=0 13:31:39 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:39 Filter is already there-color wheel unchanged 13:31:39 Received message from Master: op=Shutter serial=11283 13:31:39 Shutter LASER open 13:31:39 Received message from Camera: op=State serial=11285 13:31:39 GetSingleValue result=40 Value=cccccccc 13:31:39 SkyScan query 13:31:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:31:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:40 Parameters OK 13:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:40 Set A/D data flow result=40 13:31:40 Set A/D channel type result=40 13:31:40 Set A/D encoding result=40 13:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:40 Set channel filter=0.000000e+000 result=40 13:31:40 Config A/D Result=40 13:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:40 Get A/D filter: -9.255963e+061 result=40 13:31:40 Get A/D value=-858993460 result=40 13:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:40 Parameters OK 13:31:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:40 Set A/D data flow result=40 13:31:40 Set A/D channel type result=40 13:31:40 Set A/D encoding result=40 13:31:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:40 Set channel filter=0.000000e+000 result=40 13:31:40 Config A/D Result=40 13:31:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:40 Get A/D filter: -9.255963e+061 result=40 13:31:40 Get A/D value=-858993460 result=40 13:31:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:40 Aux= 13:31:40 Message to Camera, serial 11285 queued 13:31:42 Received message from Master: op=Shutter serial=11289 13:31:42 Shutter LASER close 13:31:43 Received message from Master: op=PointingHead serial=11293 13:31:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:31:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:31:43 Point started: ret=0 13:31:43 point_skyscan result=0 13:31:44 Check angles 13:31:44 SkyScan query 13:31:44 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.325<-21555 Statuses=0009 0009 13:31:44 Msec=0 True Az=135.78 Ze=-143.325 Az status=0009 Ze status=0009 13:31:45 Check angles 13:31:45 SkyScan query 13:31:45 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.385<-20159 Statuses=0009 0009 13:31:45 Msec=750 True Az=153.36 Ze=-122.385 Az status=0009 Ze status=0009 13:31:45 Check angles 13:31:45 SkyScan query 13:31:46 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.01<-18734 Statuses=0009 0009 13:31:46 Msec=1500 True Az=171.165 Ze=-101.01 Az status=0009 Ze status=0009 13:31:46 Check angles 13:31:46 SkyScan query 13:31:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.59<-17306 Statuses=0008 0009 13:31:47 Msec=2250 True Az=176.025 Ze=-79.59 Az status=0008 Ze status=0009 13:31:47 Check angles 13:31:47 SkyScan query 13:31:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.65<-15910 Statuses=0008 0009 13:31:48 Msec=3000 True Az=175.995 Ze=-58.65 Az status=0008 Ze status=0009 13:31:48 Check angles 13:31:48 SkyScan query 13:31:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:31:48 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:31:48 Message to Master queued w/err=0: serial=11293 error=0 13:31:53 Received message from Master: op=Filter serial=11294 13:31:53 Color wheel filter change from 0 to 0 13:31:53 FLIGetFilterPos err=0 currentPosition=0 13:31:53 FLIGetStepsRemaining err=0 RemainingSteps=0 13:31:53 Filter is already there-color wheel unchanged 13:31:53 Received message from Master: op=Shutter serial=11295 13:31:53 Shutter LASER close 13:31:54 Received message from Camera: op=State serial=11297 13:31:54 GetSingleValue result=40 Value=cccccccc 13:31:54 SkyScan query 13:31:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:31:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:54 Parameters OK 13:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:54 Set A/D data flow result=40 13:31:54 Set A/D channel type result=40 13:31:54 Set A/D encoding result=40 13:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:54 Set channel filter=0.000000e+000 result=40 13:31:54 Config A/D Result=40 13:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:54 Get A/D filter: -9.255963e+061 result=40 13:31:54 Get A/D value=-858993460 result=40 13:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:31:54 Parameters OK 13:31:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:31:54 Set A/D data flow result=40 13:31:54 Set A/D channel type result=40 13:31:54 Set A/D encoding result=40 13:31:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:31:54 Set channel filter=0.000000e+000 result=40 13:31:54 Config A/D Result=40 13:31:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:31:54 Get A/D filter: -9.255963e+061 result=40 13:31:54 Get A/D value=-858993460 result=40 13:31:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:31:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:31:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:31:54 Aux= 13:31:54 Message to Camera, serial 11297 queued [UTC 2018-12-4 13:32:09] 13:32:25 Received message from Master: op=PointingHead serial=11304 13:32:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:32:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:32:25 Point started: ret=0 13:32:25 point_skyscan result=0 13:32:26 Check angles 13:32:26 SkyScan query 13:32:27 SkyScan query done: ret=0 az=152.61<-10174 ze=-21.255<-13417 Statuses=0009 0009 13:32:27 Msec=0 True Az=152.61 Ze=-21.255 Az status=0009 Ze status=0009 13:32:27 Check angles 13:32:27 SkyScan query 13:32:27 SkyScan query done: ret=0 az=134.655<-8977 ze=0.15<-11990 Statuses=0009 0009 13:32:27 Msec=750 True Az=134.655 Ze=0.15 Az status=0009 Ze status=0009 13:32:28 Check angles 13:32:28 SkyScan query 13:32:28 SkyScan query done: ret=0 az=117.105<-7807 ze=21.09<-10594 Statuses=0009 0009 13:32:28 Msec=1500 True Az=117.105 Ze=21.09 Az status=0009 Ze status=0009 13:32:28 Check angles 13:32:28 SkyScan query 13:32:29 SkyScan query done: ret=0 az=99.84<-6656 ze=42.075<-9195 Statuses=0009 0009 13:32:29 Msec=2250 True Az=99.84 Ze=42.075 Az status=0009 Ze status=0009 13:32:29 Check angles 13:32:29 SkyScan query 13:32:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 13:32:30 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 13:32:30 Check angles 13:32:30 SkyScan query 13:32:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:32:31 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 13:32:31 Message to Master queued w/err=0: serial=11304 error=0 13:32:36 Received message from Master: op=Filter serial=11305 13:32:36 Color wheel filter change from 0 to 0 13:32:36 FLIGetFilterPos err=0 currentPosition=0 13:32:36 FLIGetStepsRemaining err=0 RemainingSteps=0 13:32:36 Filter is already there-color wheel unchanged 13:32:36 Received message from Master: op=Shutter serial=11306 13:32:36 Shutter LASER close 13:32:36 Received message from Camera: op=State serial=11308 13:32:36 GetSingleValue result=40 Value=cccccccc 13:32:36 SkyScan query 13:32:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:32:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:36 Parameters OK 13:32:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:36 Set A/D data flow result=40 13:32:36 Set A/D channel type result=40 13:32:36 Set A/D encoding result=40 13:32:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:36 Set channel filter=0.000000e+000 result=40 13:32:36 Config A/D Result=40 13:32:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:36 Get A/D filter: -9.255963e+061 result=40 13:32:36 Get A/D value=-858993460 result=40 13:32:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:32:36 Parameters OK 13:32:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:32:36 Set A/D data flow result=40 13:32:36 Set A/D channel type result=40 13:32:36 Set A/D encoding result=40 13:32:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:32:36 Set channel filter=0.000000e+000 result=40 13:32:36 Config A/D Result=40 13:32:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:32:36 Get A/D filter: -9.255963e+061 result=40 13:32:36 Get A/D value=-858993460 result=40 13:32:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:32:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:32:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:32:36 Aux= 13:32:36 Message to Camera, serial 11308 queued 13:33:07 Received message from Master: op=PointingHead serial=11315 13:33:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:33:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:33:08 Point started: ret=0 13:33:08 point_skyscan result=0 13:33:08 Check angles 13:33:08 SkyScan query 13:33:09 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 13:33:09 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 13:33:09 Check angles 13:33:09 SkyScan query 13:33:10 SkyScan query done: ret=0 az=126.84<-8456 ze=38.505<-9433 Statuses=0009 0008 13:33:10 Msec=750 True Az=126.84 Ze=38.505 Az status=0009 Ze status=0008 13:33:10 Check angles 13:33:10 SkyScan query 13:33:10 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 13:33:10 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 13:33:11 Check angles 13:33:11 SkyScan query 13:33:11 SkyScan query done: ret=0 az=161.64<-10776 ze=38.505<-9433 Statuses=0009 0008 13:33:11 Msec=2250 True Az=161.64 Ze=38.505 Az status=0009 Ze status=0008 13:33:11 Check angles 13:33:11 SkyScan query 13:33:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:33:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:33:12 Check angles 13:33:12 SkyScan query 13:33:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:33:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:33:13 Message to Master queued w/err=0: serial=11315 error=0 13:33:18 Received message from Master: op=Filter serial=11316 13:33:18 Color wheel filter change from 0 to 0 13:33:18 FLIGetFilterPos err=0 currentPosition=0 13:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 13:33:18 Filter is already there-color wheel unchanged 13:33:18 Received message from Master: op=Shutter serial=11317 13:33:18 Shutter LASER close 13:33:18 Received message from Camera: op=State serial=11319 13:33:18 GetSingleValue result=40 Value=cccccccc 13:33:18 SkyScan query 13:33:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:33:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:18 Parameters OK 13:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:18 Set A/D data flow result=40 13:33:18 Set A/D channel type result=40 13:33:18 Set A/D encoding result=40 13:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:18 Set channel filter=0.000000e+000 result=40 13:33:18 Config A/D Result=40 13:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:18 Get A/D filter: -9.255963e+061 result=40 13:33:18 Get A/D value=-858993460 result=40 13:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:33:18 Parameters OK 13:33:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:33:18 Set A/D data flow result=40 13:33:18 Set A/D channel type result=40 13:33:18 Set A/D encoding result=40 13:33:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:33:18 Set channel filter=0.000000e+000 result=40 13:33:18 Config A/D Result=40 13:33:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:33:18 Get A/D filter: -9.255963e+061 result=40 13:33:18 Get A/D value=-858993460 result=40 13:33:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:33:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:33:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:33:18 Aux= 13:33:18 Message to Camera, serial 11319 queued 13:33:49 Received message from Master: op=PointingHead serial=11326 13:33:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:33:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:33:50 Point started: ret=0 13:33:50 point_skyscan result=0 13:33:50 Check angles 13:33:50 SkyScan query 13:33:51 SkyScan query done: ret=0 az=152.985<-10199 ze=8.64<-11424 Statuses=0009 0009 13:33:51 Msec=0 True Az=152.985 Ze=8.64 Az status=0009 Ze status=0009 13:33:51 Check angles 13:33:51 SkyScan query 13:33:52 SkyScan query done: ret=0 az=135.18<-9012 ze=-12.735<-12849 Statuses=0009 0009 13:33:52 Msec=750 True Az=135.18 Ze=-12.735 Az status=0009 Ze status=0009 13:33:52 Check angles 13:33:52 SkyScan query 13:33:52 SkyScan query done: ret=0 az=117.315<-7821 ze=-34.125<-14275 Statuses=0009 0009 13:33:52 Msec=1500 True Az=117.315 Ze=-34.125 Az status=0009 Ze status=0009 13:33:53 Check angles 13:33:53 SkyScan query 13:33:53 SkyScan query done: ret=0 az=99.9<-6660 ze=-51.555<-15437 Statuses=0009 0009 13:33:53 Msec=2250 True Az=99.9 Ze=-51.555 Az status=0009 Ze status=0009 13:33:53 Check angles 13:33:53 SkyScan query 13:33:54 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:33:54 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:33:54 Check angles 13:33:54 SkyScan query 13:33:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 13:33:55 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 13:33:55 Message to Master queued w/err=0: serial=11326 error=0 13:34:00 Received message from Master: op=Filter serial=11327 13:34:00 Color wheel filter change from 0 to 0 13:34:00 FLIGetFilterPos err=0 currentPosition=0 13:34:00 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:00 Filter is already there-color wheel unchanged 13:34:00 Received message from Master: op=Shutter serial=11328 13:34:00 Shutter LASER close 13:34:00 Received message from Camera: op=State serial=11330 13:34:00 GetSingleValue result=40 Value=cccccccc 13:34:00 SkyScan query 13:34:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:34:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:01 Parameters OK 13:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:01 Set A/D data flow result=40 13:34:01 Set A/D channel type result=40 13:34:01 Set A/D encoding result=40 13:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:01 Set channel filter=0.000000e+000 result=40 13:34:01 Config A/D Result=40 13:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:01 Get A/D filter: -9.255963e+061 result=40 13:34:01 Get A/D value=-858993460 result=40 13:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:01 Parameters OK 13:34:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:01 Set A/D data flow result=40 13:34:01 Set A/D channel type result=40 13:34:01 Set A/D encoding result=40 13:34:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:01 Set channel filter=0.000000e+000 result=40 13:34:01 Config A/D Result=40 13:34:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:01 Get A/D filter: -9.255963e+061 result=40 13:34:01 Get A/D value=-858993460 result=40 13:34:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:01 Aux= 13:34:01 Message to Camera, serial 11330 queued 13:34:31 Received message from Master: op=PointingHead serial=11337 13:34:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:34:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:34:32 Point started: ret=0 13:34:32 point_skyscan result=0 13:34:32 Check angles 13:34:32 SkyScan query 13:34:33 SkyScan query done: ret=0 az=108.765<-7251 ze=-80.985<-17399 Statuses=0009 0009 13:34:33 Msec=0 True Az=108.765 Ze=-80.985 Az status=0009 Ze status=0009 13:34:33 Check angles 13:34:33 SkyScan query 13:34:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.94<-18796 Statuses=0008 0009 13:34:34 Msec=750 True Az=112.995 Ze=-101.94 Az status=0008 Ze status=0009 13:34:34 Check angles 13:34:34 SkyScan query 13:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.895<-20193 Statuses=0008 0009 13:34:35 Msec=1500 True Az=112.995 Ze=-122.895 Az status=0008 Ze status=0009 13:34:35 Check angles 13:34:35 SkyScan query 13:34:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.85<-21590 Statuses=0008 0009 13:34:35 Msec=2250 True Az=112.995 Ze=-143.85 Az status=0008 Ze status=0009 13:34:36 Check angles 13:34:36 SkyScan query 13:34:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.225<-23015 Statuses=0008 0009 13:34:36 Msec=3000 True Az=112.995 Ze=-165.225 Az status=0008 Ze status=0009 13:34:36 Check angles 13:34:36 SkyScan query 13:34:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:34:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:34:37 Message to Master queued w/err=0: serial=11337 error=0 13:34:42 Received message from Master: op=Filter serial=11338 13:34:42 Color wheel filter change from 0 to 0 13:34:42 FLIGetFilterPos err=0 currentPosition=0 13:34:42 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:42 Filter is already there-color wheel unchanged 13:34:42 Received message from Master: op=Shutter serial=11339 13:34:42 Shutter LASER open 13:34:42 Received message from Camera: op=State serial=11341 13:34:42 GetSingleValue result=40 Value=cccccccc 13:34:42 SkyScan query 13:34:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:34:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:43 Parameters OK 13:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:43 Set A/D data flow result=40 13:34:43 Set A/D channel type result=40 13:34:43 Set A/D encoding result=40 13:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:43 Set channel filter=0.000000e+000 result=40 13:34:43 Config A/D Result=40 13:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:43 Get A/D filter: -9.255963e+061 result=40 13:34:43 Get A/D value=-858993460 result=40 13:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:43 Parameters OK 13:34:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:43 Set A/D data flow result=40 13:34:43 Set A/D channel type result=40 13:34:43 Set A/D encoding result=40 13:34:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:43 Set channel filter=0.000000e+000 result=40 13:34:43 Config A/D Result=40 13:34:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:43 Get A/D filter: -9.255963e+061 result=40 13:34:43 Get A/D value=-858993460 result=40 13:34:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:43 Aux= 13:34:43 Message to Camera, serial 11341 queued 13:34:45 Received message from Master: op=Shutter serial=11345 13:34:45 Shutter LASER close 13:34:46 Received message from Master: op=PointingHead serial=11349 13:34:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:34:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:34:46 Point started: ret=0 13:34:46 point_skyscan result=0 13:34:47 Check angles 13:34:47 SkyScan query 13:34:47 SkyScan query done: ret=0 az=90.12<-6008 ze=157.425<-1505 Statuses=0009 0009 13:34:47 Msec=0 True Az=90.12 Ze=157.425 Az status=0009 Ze status=0009 13:34:47 Check angles 13:34:47 SkyScan query 13:34:48 SkyScan query done: ret=0 az=72.285<-4819 ze=136.035<-2931 Statuses=0009 0009 13:34:48 Msec=750 True Az=72.285 Ze=136.035 Az status=0009 Ze status=0009 13:34:48 Check angles 13:34:48 SkyScan query 13:34:49 SkyScan query done: ret=0 az=54.84<-3656 ze=115.08<-4328 Statuses=0009 0009 13:34:49 Msec=1500 True Az=54.84 Ze=115.08 Az status=0009 Ze status=0009 13:34:49 Check angles 13:34:49 SkyScan query 13:34:50 SkyScan query done: ret=0 az=40.845<-2723 ze=94.095<-5727 Statuses=0009 0009 13:34:50 Msec=2250 True Az=40.845 Ze=94.095 Az status=0009 Ze status=0009 13:34:50 Check angles 13:34:50 SkyScan query 13:34:50 SkyScan query done: ret=0 az=41.01<-2734 ze=73.155<-7123 Statuses=0008 0009 13:34:50 Msec=3000 True Az=41.01 Ze=73.155 Az status=0008 Ze status=0009 13:34:50 Check angles 13:34:50 SkyScan query 13:34:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 13:34:51 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 13:34:51 Check angles 13:34:51 SkyScan query 13:34:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:34:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:34:52 Message to Master queued w/err=0: serial=11349 error=0 13:34:57 Received message from Master: op=Filter serial=11350 13:34:57 Color wheel filter change from 0 to 0 13:34:57 FLIGetFilterPos err=0 currentPosition=0 13:34:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:34:57 Filter is already there-color wheel unchanged 13:34:57 Received message from Master: op=Shutter serial=11351 13:34:57 Shutter LASER close 13:34:57 Received message from Camera: op=State serial=11353 13:34:57 GetSingleValue result=40 Value=cccccccc 13:34:57 SkyScan query 13:34:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:34:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:58 Parameters OK 13:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:58 Set A/D data flow result=40 13:34:58 Set A/D channel type result=40 13:34:58 Set A/D encoding result=40 13:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:58 Set channel filter=0.000000e+000 result=40 13:34:58 Config A/D Result=40 13:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:58 Get A/D filter: -9.255963e+061 result=40 13:34:58 Get A/D value=-858993460 result=40 13:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:34:58 Parameters OK 13:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:34:58 Set A/D data flow result=40 13:34:58 Set A/D channel type result=40 13:34:58 Set A/D encoding result=40 13:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:34:58 Set channel filter=0.000000e+000 result=40 13:34:58 Config A/D Result=40 13:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:34:58 Get A/D filter: -9.255963e+061 result=40 13:34:58 Get A/D value=-858993460 result=40 13:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:34:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:34:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:34:58 Aux= 13:34:58 Message to Camera, serial 11353 queued 13:35:29 Received message from Master: op=PointingHead serial=11360 13:35:29 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:35:29 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:35:29 Point started: ret=0 13:35:29 point_skyscan result=0 13:35:30 Check angles 13:35:30 SkyScan query 13:35:30 SkyScan query done: ret=0 az=64.02<-4268 ze=66.555<-7563 Statuses=0009 0008 13:35:30 Msec=0 True Az=64.02 Ze=66.555 Az status=0009 Ze status=0008 13:35:30 Check angles 13:35:30 SkyScan query 13:35:31 SkyScan query done: ret=0 az=81.555<-5437 ze=66.495<-7567 Statuses=0009 0008 13:35:31 Msec=750 True Az=81.555 Ze=66.495 Az status=0009 Ze status=0008 13:35:31 Check angles 13:35:31 SkyScan query 13:35:32 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 13:35:32 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 13:35:32 Check angles 13:35:32 SkyScan query 13:35:33 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 13:35:33 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 13:35:33 Check angles 13:35:33 SkyScan query 13:35:33 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 13:35:33 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 13:35:33 Check angles 13:35:33 SkyScan query 13:35:34 SkyScan query done: ret=0 az=152.1<-10140 ze=66.495<-7567 Statuses=0009 0008 13:35:34 Msec=3750 True Az=152.1 Ze=66.495 Az status=0009 Ze status=0008 13:35:34 Check angles 13:35:34 SkyScan query 13:35:35 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:35:35 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:35:35 Message to Master queued w/err=0: serial=11360 error=0 13:35:40 Received message from Master: op=Filter serial=11361 13:35:40 Color wheel filter change from 0 to 0 13:35:40 FLIGetFilterPos err=0 currentPosition=0 13:35:40 FLIGetStepsRemaining err=0 RemainingSteps=0 13:35:40 Filter is already there-color wheel unchanged 13:35:40 Received message from Master: op=Shutter serial=11362 13:35:40 Shutter LASER close 13:35:40 Received message from Camera: op=State serial=11364 13:35:40 GetSingleValue result=40 Value=cccccccc 13:35:40 SkyScan query 13:35:41 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:35:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:41 Parameters OK 13:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:41 Set A/D data flow result=40 13:35:41 Set A/D channel type result=40 13:35:41 Set A/D encoding result=40 13:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:41 Set channel filter=0.000000e+000 result=40 13:35:41 Config A/D Result=40 13:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:41 Get A/D filter: -9.255963e+061 result=40 13:35:41 Get A/D value=-858993460 result=40 13:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:35:41 Parameters OK 13:35:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:35:41 Set A/D data flow result=40 13:35:41 Set A/D channel type result=40 13:35:41 Set A/D encoding result=40 13:35:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:35:41 Set channel filter=0.000000e+000 result=40 13:35:41 Config A/D Result=40 13:35:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:35:41 Get A/D filter: -9.255963e+061 result=40 13:35:41 Get A/D value=-858993460 result=40 13:35:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:35:41 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:35:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:35:41 Aux= 13:35:41 Message to Camera, serial 11364 queued 13:36:12 Received message from Master: op=PointingHead serial=11371 13:36:12 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:36:12 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:36:12 Point started: ret=0 13:36:12 point_skyscan result=0 13:36:13 Check angles 13:36:13 SkyScan query 13:36:13 SkyScan query done: ret=0 az=135.18<-9012 ze=36.945<-9537 Statuses=0009 0009 13:36:13 Msec=0 True Az=135.18 Ze=36.945 Az status=0009 Ze status=0009 13:36:13 Check angles 13:36:13 SkyScan query 13:36:14 SkyScan query done: ret=0 az=117.33<-7822 ze=15.54<-10964 Statuses=0009 0009 13:36:14 Msec=750 True Az=117.33 Ze=15.54 Az status=0009 Ze status=0009 13:36:14 Check angles 13:36:14 SkyScan query 13:36:15 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.415<-12361 Statuses=0009 0009 13:36:15 Msec=1500 True Az=99.945 Ze=-5.415 Az status=0009 Ze status=0009 13:36:15 Check angles 13:36:15 SkyScan query 13:36:15 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.385<-13759 Statuses=0009 0009 13:36:15 Msec=2250 True Az=82.425 Ze=-26.385 Az status=0009 Ze status=0009 13:36:16 Check angles 13:36:16 SkyScan query 13:36:16 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 13:36:16 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 13:36:16 Check angles 13:36:16 SkyScan query 13:36:17 SkyScan query done: ret=0 az=47.415<-3161 ze=-38.535<-14569 Statuses=0009 0008 13:36:17 Msec=3750 True Az=47.415 Ze=-38.535 Az status=0009 Ze status=0008 13:36:17 Check angles 13:36:17 SkyScan query 13:36:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:36:18 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:36:18 Message to Master queued w/err=0: serial=11371 error=0 13:36:23 Received message from Master: op=Filter serial=11372 13:36:23 Color wheel filter change from 0 to 0 13:36:23 FLIGetFilterPos err=0 currentPosition=0 13:36:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:36:23 Filter is already there-color wheel unchanged 13:36:23 Received message from Master: op=Shutter serial=11373 13:36:23 Shutter LASER close 13:36:23 Received message from Camera: op=State serial=11375 13:36:23 GetSingleValue result=40 Value=cccccccc 13:36:23 SkyScan query 13:36:24 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:36:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:24 Parameters OK 13:36:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:24 Set A/D data flow result=40 13:36:24 Set A/D channel type result=40 13:36:24 Set A/D encoding result=40 13:36:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:24 Set channel filter=0.000000e+000 result=40 13:36:24 Config A/D Result=40 13:36:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:24 Get A/D filter: -9.255963e+061 result=40 13:36:24 Get A/D value=-858993460 result=40 13:36:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:36:24 Parameters OK 13:36:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:36:24 Set A/D data flow result=40 13:36:24 Set A/D channel type result=40 13:36:24 Set A/D encoding result=40 13:36:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:36:24 Set channel filter=0.000000e+000 result=40 13:36:24 Config A/D Result=40 13:36:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:36:24 Get A/D filter: -9.255963e+061 result=40 13:36:24 Get A/D value=-858993460 result=40 13:36:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:36:24 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:36:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:36:24 Aux= 13:36:24 Message to Camera, serial 11375 queued 13:36:54 Received message from Master: op=PointingHead serial=11382 13:36:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:36:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:36:55 Point started: ret=0 13:36:55 point_skyscan result=0 13:36:55 Check angles 13:36:55 SkyScan query 13:36:56 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.7<-16580 Statuses=0009 0009 13:36:56 Msec=0 True Az=64.245 Ze=-68.7 Az status=0009 Ze status=0009 13:36:56 Check angles 13:36:56 SkyScan query 13:36:57 SkyScan query done: ret=0 az=81.96<-5464 ze=-89.67<-17978 Statuses=0009 0009 13:36:57 Msec=750 True Az=81.96 Ze=-89.67 Az status=0009 Ze status=0009 13:36:57 Check angles 13:36:57 SkyScan query 13:36:58 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.625<-19375 Statuses=0009 0009 13:36:58 Msec=1500 True Az=99.36 Ze=-110.625 Az status=0009 Ze status=0009 13:36:58 Check angles 13:36:58 SkyScan query 13:36:58 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.565<-20771 Statuses=0009 0009 13:36:58 Msec=2250 True Az=116.805 Ze=-131.565 Az status=0009 Ze status=0009 13:36:58 Check angles 13:36:58 SkyScan query 13:36:59 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 13:36:59 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 13:36:59 Check angles 13:36:59 SkyScan query 13:37:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:37:00 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:37:00 Message to Master queued w/err=0: serial=11382 error=0 13:37:05 Received message from Master: op=Filter serial=11383 13:37:05 Color wheel filter change from 0 to 0 13:37:05 FLIGetFilterPos err=0 currentPosition=0 13:37:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:05 Filter is already there-color wheel unchanged 13:37:05 Received message from Master: op=Shutter serial=11384 13:37:05 Shutter LASER close 13:37:05 Received message from Camera: op=State serial=11386 13:37:05 GetSingleValue result=40 Value=cccccccc 13:37:05 SkyScan query 13:37:06 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:37:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:06 Parameters OK 13:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:06 Set A/D data flow result=40 13:37:06 Set A/D channel type result=40 13:37:06 Set A/D encoding result=40 13:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:06 Set channel filter=0.000000e+000 result=40 13:37:06 Config A/D Result=40 13:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:06 Get A/D filter: -9.255963e+061 result=40 13:37:06 Get A/D value=-858993460 result=40 13:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:06 Parameters OK 13:37:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:06 Set A/D data flow result=40 13:37:06 Set A/D channel type result=40 13:37:06 Set A/D encoding result=40 13:37:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:06 Set channel filter=0.000000e+000 result=40 13:37:06 Config A/D Result=40 13:37:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:06 Get A/D filter: -9.255963e+061 result=40 13:37:06 Get A/D value=-858993460 result=40 13:37:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:06 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:06 Aux= 13:37:06 Message to Camera, serial 11386 queued 13:37:36 Received message from Master: op=PointingHead serial=11393 13:37:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:37:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:37:37 Point started: ret=0 13:37:37 point_skyscan result=0 13:37:38 Check angles 13:37:38 SkyScan query 13:37:38 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.135<-23409 Statuses=0009 0009 13:37:38 Msec=0 True Az=113.025 Ze=-171.135 Az status=0009 Ze status=0009 13:37:38 Check angles 13:37:38 SkyScan query 13:37:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:37:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:37:39 Message to Master queued w/err=0: serial=11393 error=0 13:37:44 Received message from Master: op=Filter serial=11394 13:37:44 Color wheel filter change from 0 to 0 13:37:44 FLIGetFilterPos err=0 currentPosition=0 13:37:44 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:44 Filter is already there-color wheel unchanged 13:37:44 Received message from Master: op=Shutter serial=11395 13:37:44 Shutter LASER open 13:37:44 Received message from Camera: op=State serial=11397 13:37:44 GetSingleValue result=40 Value=cccccccc 13:37:44 SkyScan query 13:37:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:37:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:45 Parameters OK 13:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:45 Set A/D data flow result=40 13:37:45 Set A/D channel type result=40 13:37:45 Set A/D encoding result=40 13:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:45 Set channel filter=0.000000e+000 result=40 13:37:45 Config A/D Result=40 13:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:45 Get A/D filter: -9.255963e+061 result=40 13:37:45 Get A/D value=-858993460 result=40 13:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:45 Parameters OK 13:37:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:45 Set A/D data flow result=40 13:37:45 Set A/D channel type result=40 13:37:45 Set A/D encoding result=40 13:37:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:45 Set channel filter=0.000000e+000 result=40 13:37:45 Config A/D Result=40 13:37:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:45 Get A/D filter: -9.255963e+061 result=40 13:37:45 Get A/D value=-858993460 result=40 13:37:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:45 Aux= 13:37:45 Message to Camera, serial 11397 queued 13:37:47 Received message from Master: op=Shutter serial=11401 13:37:47 Shutter LASER close 13:37:48 Received message from Master: op=PointingHead serial=11405 13:37:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:37:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:37:48 Point started: ret=0 13:37:48 point_skyscan result=0 13:37:49 Check angles 13:37:49 SkyScan query 13:37:50 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.25<-21550 Statuses=0009 0009 13:37:50 Msec=0 True Az=136.02 Ze=-143.25 Az status=0009 Ze status=0009 13:37:50 Check angles 13:37:50 SkyScan query 13:37:50 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.845<-20123 Statuses=0009 0009 13:37:50 Msec=750 True Az=153.9 Ze=-121.845 Az status=0009 Ze status=0009 13:37:50 Check angles 13:37:50 SkyScan query 13:37:51 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.92<-18728 Statuses=0009 0009 13:37:51 Msec=1500 True Az=171.405 Ze=-100.92 Az status=0009 Ze status=0009 13:37:51 Check angles 13:37:51 SkyScan query 13:37:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.98<-17332 Statuses=0008 0009 13:37:52 Msec=2250 True Az=176.01 Ze=-79.98 Az status=0008 Ze status=0009 13:37:52 Check angles 13:37:52 SkyScan query 13:37:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.01<-15934 Statuses=0008 0009 13:37:53 Msec=3000 True Az=175.995 Ze=-59.01 Az status=0008 Ze status=0009 13:37:53 Check angles 13:37:53 SkyScan query 13:37:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:37:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:37:53 Message to Master queued w/err=0: serial=11405 error=0 13:37:58 Received message from Master: op=Filter serial=11406 13:37:58 Color wheel filter change from 0 to 0 13:37:58 FLIGetFilterPos err=0 currentPosition=0 13:37:58 FLIGetStepsRemaining err=0 RemainingSteps=0 13:37:58 Filter is already there-color wheel unchanged 13:37:58 Received message from Master: op=Shutter serial=11407 13:37:58 Shutter LASER close 13:37:59 Received message from Camera: op=State serial=11409 13:37:59 GetSingleValue result=40 Value=cccccccc 13:37:59 SkyScan query 13:37:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:37:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:59 Parameters OK 13:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:59 Set A/D data flow result=40 13:37:59 Set A/D channel type result=40 13:37:59 Set A/D encoding result=40 13:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:59 Set channel filter=0.000000e+000 result=40 13:37:59 Config A/D Result=40 13:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:59 Get A/D filter: -9.255963e+061 result=40 13:37:59 Get A/D value=-858993460 result=40 13:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:37:59 Parameters OK 13:37:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:37:59 Set A/D data flow result=40 13:37:59 Set A/D channel type result=40 13:37:59 Set A/D encoding result=40 13:37:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:37:59 Set channel filter=0.000000e+000 result=40 13:37:59 Config A/D Result=40 13:37:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:37:59 Get A/D filter: -9.255963e+061 result=40 13:37:59 Get A/D value=-858993460 result=40 13:37:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:37:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:37:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:37:59 Aux= 13:37:59 Message to Camera, serial 11409 queued 13:38:30 Received message from Master: op=PointingHead serial=11416 13:38:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:38:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:38:30 Point started: ret=0 13:38:30 point_skyscan result=0 13:38:31 Check angles 13:38:31 SkyScan query 13:38:32 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.315<-13421 Statuses=0009 0009 13:38:32 Msec=0 True Az=152.685 Ze=-21.315 Az status=0009 Ze status=0009 13:38:32 Check angles 13:38:32 SkyScan query 13:38:33 SkyScan query done: ret=0 az=135.165<-9011 ze=-0.375<-12025 Statuses=0009 0009 13:38:33 Msec=750 True Az=135.165 Ze=-0.375 Az status=0009 Ze status=0009 13:38:33 Check angles 13:38:33 SkyScan query 13:38:33 SkyScan query done: ret=0 az=117.585<-7839 ze=20.61<-10626 Statuses=0009 0009 13:38:33 Msec=1500 True Az=117.585 Ze=20.61 Az status=0009 Ze status=0009 13:38:33 Check angles 13:38:33 SkyScan query 13:38:34 SkyScan query done: ret=0 az=99.9<-6660 ze=41.985<-9201 Statuses=0009 0009 13:38:34 Msec=2250 True Az=99.9 Ze=41.985 Az status=0009 Ze status=0009 13:38:34 Check angles 13:38:34 SkyScan query 13:38:35 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 13:38:35 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 13:38:35 Check angles 13:38:35 SkyScan query 13:38:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:38:36 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:38:36 Message to Master queued w/err=0: serial=11416 error=0 13:38:41 Received message from Master: op=Filter serial=11417 13:38:41 Color wheel filter change from 0 to 0 13:38:41 FLIGetFilterPos err=0 currentPosition=0 13:38:41 FLIGetStepsRemaining err=0 RemainingSteps=0 13:38:41 Filter is already there-color wheel unchanged 13:38:41 Received message from Master: op=Shutter serial=11418 13:38:41 Shutter LASER close 13:38:41 Received message from Camera: op=State serial=11420 13:38:41 GetSingleValue result=40 Value=cccccccc 13:38:41 SkyScan query 13:38:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:38:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:41 Parameters OK 13:38:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:41 Set A/D data flow result=40 13:38:41 Set A/D channel type result=40 13:38:41 Set A/D encoding result=40 13:38:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:41 Set channel filter=0.000000e+000 result=40 13:38:41 Config A/D Result=40 13:38:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:41 Get A/D filter: -9.255963e+061 result=40 13:38:41 Get A/D value=-858993460 result=40 13:38:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:38:41 Parameters OK 13:38:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:38:41 Set A/D data flow result=40 13:38:41 Set A/D channel type result=40 13:38:41 Set A/D encoding result=40 13:38:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:38:41 Set channel filter=0.000000e+000 result=40 13:38:41 Config A/D Result=40 13:38:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:38:41 Get A/D filter: -9.255963e+061 result=40 13:38:41 Get A/D value=-858993460 result=40 13:38:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:38:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:38:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:38:41 Aux= 13:38:41 Message to Camera, serial 11420 queued 13:39:12 Received message from Master: op=PointingHead serial=11427 13:39:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:39:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:39:13 Point started: ret=0 13:39:13 point_skyscan result=0 13:39:13 Check angles 13:39:13 SkyScan query 13:39:14 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 13:39:14 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 13:39:14 Check angles 13:39:14 SkyScan query 13:39:15 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 13:39:15 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 13:39:15 Check angles 13:39:15 SkyScan query 13:39:15 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 13:39:15 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 13:39:16 Check angles 13:39:16 SkyScan query 13:39:16 SkyScan query done: ret=0 az=161.7<-10780 ze=38.505<-9433 Statuses=0009 0008 13:39:16 Msec=2250 True Az=161.7 Ze=38.505 Az status=0009 Ze status=0008 13:39:16 Check angles 13:39:16 SkyScan query 13:39:17 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 13:39:17 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 13:39:17 Check angles 13:39:17 SkyScan query 13:39:18 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:39:18 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:39:18 Message to Master queued w/err=0: serial=11427 error=0 13:39:23 Received message from Master: op=Filter serial=11428 13:39:23 Color wheel filter change from 0 to 0 13:39:23 FLIGetFilterPos err=0 currentPosition=0 13:39:23 FLIGetStepsRemaining err=0 RemainingSteps=0 13:39:23 Filter is already there-color wheel unchanged 13:39:23 Received message from Master: op=Shutter serial=11429 13:39:23 Shutter LASER close 13:39:23 Received message from Camera: op=State serial=11431 13:39:23 GetSingleValue result=40 Value=cccccccc 13:39:23 SkyScan query 13:39:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:39:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:23 Parameters OK 13:39:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:23 Set A/D data flow result=40 13:39:23 Set A/D channel type result=40 13:39:23 Set A/D encoding result=40 13:39:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:23 Set channel filter=0.000000e+000 result=40 13:39:23 Config A/D Result=40 13:39:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:23 Get A/D filter: -9.255963e+061 result=40 13:39:23 Get A/D value=-858993460 result=40 13:39:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:39:23 Parameters OK 13:39:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:39:23 Set A/D data flow result=40 13:39:23 Set A/D channel type result=40 13:39:23 Set A/D encoding result=40 13:39:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:39:23 Set channel filter=0.000000e+000 result=40 13:39:23 Config A/D Result=40 13:39:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:39:23 Get A/D filter: -9.255963e+061 result=40 13:39:23 Get A/D value=-858993460 result=40 13:39:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:39:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:39:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:39:23 Aux= 13:39:23 Message to Camera, serial 11431 queued 13:39:54 Received message from Master: op=PointingHead serial=11438 13:39:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:39:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:39:55 Point started: ret=0 13:39:55 point_skyscan result=0 13:39:55 Check angles 13:39:55 SkyScan query 13:39:56 SkyScan query done: ret=0 az=152.67<-10178 ze=8.265<-11449 Statuses=0009 0009 13:39:56 Msec=0 True Az=152.67 Ze=8.265 Az status=0009 Ze status=0009 13:39:56 Check angles 13:39:56 SkyScan query 13:39:57 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.705<-12847 Statuses=0009 0009 13:39:57 Msec=750 True Az=135.15 Ze=-12.705 Az status=0009 Ze status=0009 13:39:57 Check angles 13:39:57 SkyScan query 13:39:58 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.63<-14242 Statuses=0009 0009 13:39:58 Msec=1500 True Az=117.615 Ze=-33.63 Az status=0009 Ze status=0009 13:39:58 Check angles 13:39:58 SkyScan query 13:39:58 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.54<-15436 Statuses=0009 0009 13:39:58 Msec=2250 True Az=100.245 Ze=-51.54 Az status=0009 Ze status=0009 13:39:58 Check angles 13:39:58 SkyScan query 13:39:59 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:39:59 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:39:59 Check angles 13:39:59 SkyScan query 13:40:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:40:00 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:40:00 Message to Master queued w/err=0: serial=11438 error=0 13:40:05 Received message from Master: op=Filter serial=11439 13:40:05 Color wheel filter change from 0 to 0 13:40:05 FLIGetFilterPos err=0 currentPosition=0 13:40:05 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:05 Filter is already there-color wheel unchanged 13:40:05 Received message from Master: op=Shutter serial=11440 13:40:05 Shutter LASER close 13:40:05 Received message from Camera: op=State serial=11442 13:40:05 GetSingleValue result=40 Value=cccccccc 13:40:05 SkyScan query 13:40:06 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:40:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:06 Parameters OK 13:40:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:06 Set A/D data flow result=40 13:40:06 Set A/D channel type result=40 13:40:06 Set A/D encoding result=40 13:40:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:06 Set channel filter=0.000000e+000 result=40 13:40:06 Config A/D Result=40 13:40:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:06 Get A/D filter: -9.255963e+061 result=40 13:40:06 Get A/D value=-858993460 result=40 13:40:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:06 Parameters OK 13:40:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:06 Set A/D data flow result=40 13:40:06 Set A/D channel type result=40 13:40:06 Set A/D encoding result=40 13:40:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:06 Set channel filter=0.000000e+000 result=40 13:40:06 Config A/D Result=40 13:40:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:06 Get A/D filter: -9.255963e+061 result=40 13:40:06 Get A/D value=-858993460 result=40 13:40:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:06 Aux= 13:40:06 Message to Camera, serial 11442 queued 13:40:36 Received message from Master: op=PointingHead serial=11449 13:40:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:40:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:40:37 Point started: ret=0 13:40:37 point_skyscan result=0 13:40:38 Check angles 13:40:38 SkyScan query 13:40:38 SkyScan query done: ret=0 az=109.53<-7302 ze=-81.81<-17454 Statuses=0009 0009 13:40:38 Msec=0 True Az=109.53 Ze=-81.81 Az status=0009 Ze status=0009 13:40:38 Check angles 13:40:38 SkyScan query 13:40:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.765<-18851 Statuses=0008 0009 13:40:39 Msec=750 True Az=112.995 Ze=-102.765 Az status=0008 Ze status=0009 13:40:39 Check angles 13:40:39 SkyScan query 13:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.705<-20247 Statuses=0008 0009 13:40:40 Msec=1500 True Az=112.995 Ze=-123.705 Az status=0008 Ze status=0009 13:40:40 Check angles 13:40:40 SkyScan query 13:40:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.11<-21674 Statuses=0008 0009 13:40:40 Msec=2250 True Az=112.995 Ze=-145.11 Az status=0008 Ze status=0009 13:40:41 Check angles 13:40:41 SkyScan query 13:40:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.5<-23100 Statuses=0008 0009 13:40:41 Msec=3000 True Az=112.995 Ze=-166.5 Az status=0008 Ze status=0009 13:40:41 Check angles 13:40:41 SkyScan query 13:40:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:40:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:40:42 Message to Master queued w/err=0: serial=11449 error=0 13:40:47 Received message from Master: op=Filter serial=11450 13:40:47 Color wheel filter change from 0 to 0 13:40:47 FLIGetFilterPos err=0 currentPosition=0 13:40:47 FLIGetStepsRemaining err=0 RemainingSteps=0 13:40:47 Filter is already there-color wheel unchanged 13:40:47 Received message from Master: op=Shutter serial=11451 13:40:47 Shutter LASER open 13:40:47 Received message from Camera: op=State serial=11453 13:40:47 GetSingleValue result=40 Value=cccccccc 13:40:47 SkyScan query 13:40:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:40:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:48 Parameters OK 13:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:48 Set A/D data flow result=40 13:40:48 Set A/D channel type result=40 13:40:48 Set A/D encoding result=40 13:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:48 Set channel filter=0.000000e+000 result=40 13:40:48 Config A/D Result=40 13:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:48 Get A/D filter: -9.255963e+061 result=40 13:40:48 Get A/D value=-858993460 result=40 13:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:40:48 Parameters OK 13:40:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:40:48 Set A/D data flow result=40 13:40:48 Set A/D channel type result=40 13:40:48 Set A/D encoding result=40 13:40:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:40:48 Set channel filter=0.000000e+000 result=40 13:40:48 Config A/D Result=40 13:40:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:40:48 Get A/D filter: -9.255963e+061 result=40 13:40:48 Get A/D value=-858993460 result=40 13:40:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:40:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:40:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:40:48 Aux= 13:40:48 Message to Camera, serial 11453 queued 13:40:50 Received message from Master: op=Shutter serial=11457 13:40:50 Shutter LASER close 13:40:51 Received message from Master: op=PointingHead serial=11461 13:40:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:40:51 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-4 13:40:51] 13:40:51 Point started: ret=0 13:40:51 point_skyscan result=0 13:40:52 Check angles 13:40:52 SkyScan query 13:40:53 SkyScan query done: ret=0 az=88.41<-5894 ze=155.49<-1634 Statuses=0009 0009 13:40:53 Msec=0 True Az=88.41 Ze=155.49 Az status=0009 Ze status=0009 13:40:53 Check angles 13:40:53 SkyScan query 13:40:53 SkyScan query done: ret=0 az=70.92<-4728 ze=134.52<-3032 Statuses=0009 0009 13:40:53 Msec=750 True Az=70.92 Ze=134.52 Az status=0009 Ze status=0009 13:40:53 Check angles 13:40:53 SkyScan query 13:40:54 SkyScan query done: ret=0 az=53.22<-3548 ze=113.115<-4459 Statuses=0009 0009 13:40:54 Msec=1500 True Az=53.22 Ze=113.115 Az status=0009 Ze status=0009 13:40:54 Check angles 13:40:54 SkyScan query 13:40:55 SkyScan query done: ret=0 az=41.085<-2739 ze=92.175<-5855 Statuses=0009 0009 13:40:55 Msec=2250 True Az=41.085 Ze=92.175 Az status=0009 Ze status=0009 13:40:55 Check angles 13:40:55 SkyScan query 13:40:56 SkyScan query done: ret=0 az=40.995<-2733 ze=70.785<-7281 Statuses=0008 0009 13:40:56 Msec=3000 True Az=40.995 Ze=70.785 Az status=0008 Ze status=0009 13:40:56 Check angles 13:40:56 SkyScan query 13:40:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.645<-8557 Statuses=0008 0009 13:40:56 Msec=3750 True Az=40.995 Ze=51.645 Az status=0008 Ze status=0009 13:40:56 Check angles 13:40:56 SkyScan query 13:40:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:40:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:40:57 Message to Master queued w/err=0: serial=11461 error=0 13:41:02 Received message from Master: op=Filter serial=11462 13:41:02 Color wheel filter change from 0 to 0 13:41:02 FLIGetFilterPos err=0 currentPosition=0 13:41:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:02 Filter is already there-color wheel unchanged 13:41:02 Received message from Master: op=Shutter serial=11463 13:41:02 Shutter LASER close 13:41:02 Received message from Camera: op=State serial=11465 13:41:02 GetSingleValue result=40 Value=cccccccc 13:41:02 SkyScan query 13:41:03 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:41:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:03 Parameters OK 13:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:03 Set A/D data flow result=40 13:41:03 Set A/D channel type result=40 13:41:03 Set A/D encoding result=40 13:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:03 Set channel filter=0.000000e+000 result=40 13:41:03 Config A/D Result=40 13:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:03 Get A/D filter: -9.255963e+061 result=40 13:41:03 Get A/D value=-858993460 result=40 13:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:03 Parameters OK 13:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:03 Set A/D data flow result=40 13:41:03 Set A/D channel type result=40 13:41:03 Set A/D encoding result=40 13:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:03 Set channel filter=0.000000e+000 result=40 13:41:03 Config A/D Result=40 13:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:03 Get A/D filter: -9.255963e+061 result=40 13:41:03 Get A/D value=-858993460 result=40 13:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:03 Aux= 13:41:03 Message to Camera, serial 11465 queued 13:41:34 Received message from Master: op=PointingHead serial=11472 13:41:34 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:41:34 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:41:34 Point started: ret=0 13:41:34 point_skyscan result=0 13:41:35 Check angles 13:41:35 SkyScan query 13:41:35 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 13:41:35 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 13:41:36 Check angles 13:41:36 SkyScan query 13:41:36 SkyScan query done: ret=0 az=82.305<-5487 ze=66.495<-7567 Statuses=0009 0008 13:41:36 Msec=750 True Az=82.305 Ze=66.495 Az status=0009 Ze status=0008 13:41:36 Check angles 13:41:36 SkyScan query 13:41:37 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 13:41:37 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 13:41:37 Check angles 13:41:37 SkyScan query 13:41:38 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 13:41:38 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 13:41:38 Check angles 13:41:38 SkyScan query 13:41:39 SkyScan query done: ret=0 az=135.06<-9004 ze=66.495<-7567 Statuses=0009 0008 13:41:39 Msec=3000 True Az=135.06 Ze=66.495 Az status=0009 Ze status=0008 13:41:39 Check angles 13:41:39 SkyScan query 13:41:39 SkyScan query done: ret=0 az=152.625<-10175 ze=66.495<-7567 Statuses=0009 0008 13:41:39 Msec=3750 True Az=152.625 Ze=66.495 Az status=0009 Ze status=0008 13:41:39 Check angles 13:41:39 SkyScan query 13:41:40 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:41:40 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:41:40 Message to Master queued w/err=0: serial=11472 error=0 13:41:45 Received message from Master: op=Filter serial=11473 13:41:45 Color wheel filter change from 0 to 0 13:41:45 FLIGetFilterPos err=0 currentPosition=0 13:41:45 FLIGetStepsRemaining err=0 RemainingSteps=0 13:41:45 Filter is already there-color wheel unchanged 13:41:45 Received message from Master: op=Shutter serial=11474 13:41:45 Shutter LASER close 13:41:45 Received message from Camera: op=State serial=11476 13:41:45 GetSingleValue result=40 Value=cccccccc 13:41:45 SkyScan query 13:41:46 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:41:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:46 Parameters OK 13:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:46 Set A/D data flow result=40 13:41:46 Set A/D channel type result=40 13:41:46 Set A/D encoding result=40 13:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:46 Set channel filter=0.000000e+000 result=40 13:41:46 Config A/D Result=40 13:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:46 Get A/D filter: -9.255963e+061 result=40 13:41:46 Get A/D value=-858993460 result=40 13:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:41:46 Parameters OK 13:41:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:41:46 Set A/D data flow result=40 13:41:46 Set A/D channel type result=40 13:41:46 Set A/D encoding result=40 13:41:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:41:46 Set channel filter=0.000000e+000 result=40 13:41:46 Config A/D Result=40 13:41:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:41:46 Get A/D filter: -9.255963e+061 result=40 13:41:46 Get A/D value=-858993460 result=40 13:41:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:41:46 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:41:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:41:46 Aux= 13:41:46 Message to Camera, serial 11476 queued 13:42:17 Received message from Master: op=PointingHead serial=11483 13:42:17 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:42:17 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:42:17 Point started: ret=0 13:42:17 point_skyscan result=0 13:42:18 Check angles 13:42:18 SkyScan query 13:42:18 SkyScan query done: ret=0 az=135.165<-9011 ze=36.765<-9549 Statuses=0009 0009 13:42:18 Msec=0 True Az=135.165 Ze=36.765 Az status=0009 Ze status=0009 13:42:18 Check angles 13:42:18 SkyScan query 13:42:19 SkyScan query done: ret=0 az=117.675<-7845 ze=15.885<-10941 Statuses=0009 0009 13:42:19 Msec=750 True Az=117.675 Ze=15.885 Az status=0009 Ze status=0009 13:42:19 Check angles 13:42:19 SkyScan query 13:42:20 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.49<-12366 Statuses=0009 0009 13:42:20 Msec=1500 True Az=99.915 Ze=-5.49 Az status=0009 Ze status=0009 13:42:20 Check angles 13:42:20 SkyScan query 13:42:21 SkyScan query done: ret=0 az=81.9<-5460 ze=-27.285<-13819 Statuses=0009 0009 13:42:21 Msec=2250 True Az=81.9 Ze=-27.285 Az status=0009 Ze status=0009 13:42:21 Check angles 13:42:21 SkyScan query 13:42:21 SkyScan query done: ret=0 az=64.575<-4305 ze=-38.565<-14571 Statuses=0009 0008 13:42:21 Msec=3000 True Az=64.575 Ze=-38.565 Az status=0009 Ze status=0008 13:42:22 Check angles 13:42:22 SkyScan query 13:42:22 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 13:42:22 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 13:42:22 Check angles 13:42:22 SkyScan query 13:42:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:42:23 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:42:23 Message to Master queued w/err=0: serial=11483 error=0 13:42:28 Received message from Master: op=Filter serial=11484 13:42:28 Color wheel filter change from 0 to 0 13:42:28 FLIGetFilterPos err=0 currentPosition=0 13:42:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:42:28 Filter is already there-color wheel unchanged 13:42:28 Received message from Master: op=Shutter serial=11485 13:42:28 Shutter LASER close 13:42:28 Received message from Camera: op=State serial=11487 13:42:28 GetSingleValue result=40 Value=cccccccc 13:42:28 SkyScan query 13:42:29 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:42:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:29 Parameters OK 13:42:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:29 Set A/D data flow result=40 13:42:29 Set A/D channel type result=40 13:42:29 Set A/D encoding result=40 13:42:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:29 Set channel filter=0.000000e+000 result=40 13:42:29 Config A/D Result=40 13:42:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:29 Get A/D filter: -9.255963e+061 result=40 13:42:29 Get A/D value=-858993460 result=40 13:42:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:42:29 Parameters OK 13:42:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:42:29 Set A/D data flow result=40 13:42:29 Set A/D channel type result=40 13:42:29 Set A/D encoding result=40 13:42:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:42:29 Set channel filter=0.000000e+000 result=40 13:42:29 Config A/D Result=40 13:42:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:42:29 Get A/D filter: -9.255963e+061 result=40 13:42:29 Get A/D value=-858993460 result=40 13:42:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:42:29 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:42:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:42:29 Aux= 13:42:29 Message to Camera, serial 11487 queued 13:42:59 Received message from Master: op=PointingHead serial=11494 13:42:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:42:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:43:00 Point started: ret=0 13:43:00 point_skyscan result=0 13:43:01 Check angles 13:43:01 SkyScan query 13:43:01 SkyScan query done: ret=0 az=64.005<-4267 ze=-68.415<-16561 Statuses=0009 0009 13:43:01 Msec=0 True Az=64.005 Ze=-68.415 Az status=0009 Ze status=0009 13:43:01 Check angles 13:43:01 SkyScan query 13:43:02 SkyScan query done: ret=0 az=81.495<-5433 ze=-89.385<-17959 Statuses=0009 0009 13:43:02 Msec=750 True Az=81.495 Ze=-89.385 Az status=0009 Ze status=0009 13:43:02 Check angles 13:43:02 SkyScan query 13:43:03 SkyScan query done: ret=0 az=99.18<-6612 ze=-110.325<-19355 Statuses=0009 0009 13:43:03 Msec=1500 True Az=99.18 Ze=-110.325 Az status=0009 Ze status=0009 13:43:03 Check angles 13:43:03 SkyScan query 13:43:03 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.28<-20752 Statuses=0009 0009 13:43:03 Msec=2250 True Az=116.55 Ze=-131.28 Az status=0009 Ze status=0009 13:43:04 Check angles 13:43:04 SkyScan query 13:43:04 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.525<-21435 Statuses=0009 0008 13:43:04 Msec=3000 True Az=131.1 Ze=-141.525 Az status=0009 Ze status=0008 13:43:04 Check angles 13:43:04 SkyScan query 13:43:05 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:43:05 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:43:05 Message to Master queued w/err=0: serial=11494 error=0 13:43:10 Received message from Master: op=Filter serial=11495 13:43:10 Color wheel filter change from 0 to 0 13:43:10 FLIGetFilterPos err=0 currentPosition=0 13:43:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:10 Filter is already there-color wheel unchanged 13:43:10 Received message from Master: op=Shutter serial=11496 13:43:10 Shutter LASER close 13:43:10 Received message from Camera: op=State serial=11498 13:43:10 GetSingleValue result=40 Value=cccccccc 13:43:10 SkyScan query 13:43:11 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:43:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:11 Parameters OK 13:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:11 Set A/D data flow result=40 13:43:11 Set A/D channel type result=40 13:43:11 Set A/D encoding result=40 13:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:11 Set channel filter=0.000000e+000 result=40 13:43:11 Config A/D Result=40 13:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:11 Get A/D filter: -9.255963e+061 result=40 13:43:11 Get A/D value=-858993460 result=40 13:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:11 Parameters OK 13:43:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:11 Set A/D data flow result=40 13:43:11 Set A/D channel type result=40 13:43:11 Set A/D encoding result=40 13:43:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:11 Set channel filter=0.000000e+000 result=40 13:43:11 Config A/D Result=40 13:43:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:11 Get A/D filter: -9.255963e+061 result=40 13:43:11 Get A/D value=-858993460 result=40 13:43:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:11 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:11 Aux= 13:43:11 Message to Camera, serial 11498 queued 13:43:42 Received message from Master: op=PointingHead serial=11505 13:43:42 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:43:42 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:43:42 Point started: ret=0 13:43:42 point_skyscan result=0 13:43:43 Check angles 13:43:43 SkyScan query 13:43:43 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.015<-23401 Statuses=0009 0009 13:43:43 Msec=0 True Az=113.025 Ze=-171.015 Az status=0009 Ze status=0009 13:43:43 Check angles 13:43:43 SkyScan query 13:43:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:43:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:43:44 Message to Master queued w/err=0: serial=11505 error=0 13:43:49 Received message from Master: op=Filter serial=11506 13:43:49 Color wheel filter change from 0 to 0 13:43:49 FLIGetFilterPos err=0 currentPosition=0 13:43:49 FLIGetStepsRemaining err=0 RemainingSteps=0 13:43:49 Filter is already there-color wheel unchanged 13:43:49 Received message from Master: op=Shutter serial=11507 13:43:49 Shutter LASER open 13:43:49 Received message from Camera: op=State serial=11509 13:43:49 GetSingleValue result=40 Value=cccccccc 13:43:49 SkyScan query 13:43:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:43:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:50 Parameters OK 13:43:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:50 Set A/D data flow result=40 13:43:50 Set A/D channel type result=40 13:43:50 Set A/D encoding result=40 13:43:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:50 Set channel filter=0.000000e+000 result=40 13:43:50 Config A/D Result=40 13:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:50 Get A/D filter: -9.255963e+061 result=40 13:43:50 Get A/D value=-858993460 result=40 13:43:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:43:50 Parameters OK 13:43:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:43:50 Set A/D data flow result=40 13:43:50 Set A/D channel type result=40 13:43:50 Set A/D encoding result=40 13:43:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:43:50 Set channel filter=0.000000e+000 result=40 13:43:50 Config A/D Result=40 13:43:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:43:50 Get A/D filter: -9.255963e+061 result=40 13:43:50 Get A/D value=-858993460 result=40 13:43:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:43:50 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:43:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:43:50 Aux= 13:43:50 Message to Camera, serial 11509 queued 13:43:52 Received message from Master: op=Shutter serial=11513 13:43:52 Shutter LASER close 13:43:53 Received message from Master: op=PointingHead serial=11517 13:43:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:43:53 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:43:53 Point started: ret=0 13:43:53 point_skyscan result=0 13:43:54 Check angles 13:43:54 SkyScan query 13:43:55 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.085<-21539 Statuses=0009 0009 13:43:55 Msec=0 True Az=136.155 Ze=-143.085 Az status=0009 Ze status=0009 13:43:55 Check angles 13:43:55 SkyScan query 13:43:55 SkyScan query done: ret=0 az=153.69<-10246 ze=-122.085<-20139 Statuses=0009 0009 13:43:55 Msec=750 True Az=153.69 Ze=-122.085 Az status=0009 Ze status=0009 13:43:56 Check angles 13:43:56 SkyScan query 13:43:56 SkyScan query done: ret=0 az=171.03<-11402 ze=-101.19<-18746 Statuses=0009 0009 13:43:56 Msec=1500 True Az=171.03 Ze=-101.19 Az status=0009 Ze status=0009 13:43:56 Check angles 13:43:56 SkyScan query 13:43:57 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.77<-17318 Statuses=0008 0009 13:43:57 Msec=2250 True Az=176.025 Ze=-79.77 Az status=0008 Ze status=0009 13:43:57 Check angles 13:43:57 SkyScan query 13:43:58 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.815<-15921 Statuses=0008 0009 13:43:58 Msec=3000 True Az=176.01 Ze=-58.815 Az status=0008 Ze status=0009 13:43:58 Check angles 13:43:58 SkyScan query 13:43:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:43:58 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:43:58 Message to Master queued w/err=0: serial=11517 error=0 13:44:03 Received message from Master: op=Filter serial=11518 13:44:03 Color wheel filter change from 0 to 0 13:44:03 FLIGetFilterPos err=0 currentPosition=0 13:44:03 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:03 Filter is already there-color wheel unchanged 13:44:04 Received message from Master: op=Shutter serial=11519 13:44:04 Shutter LASER close 13:44:04 Received message from Camera: op=State serial=11521 13:44:04 GetSingleValue result=40 Value=cccccccc 13:44:04 SkyScan query 13:44:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:44:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:04 Parameters OK 13:44:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:04 Set A/D data flow result=40 13:44:04 Set A/D channel type result=40 13:44:04 Set A/D encoding result=40 13:44:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:04 Set channel filter=0.000000e+000 result=40 13:44:04 Config A/D Result=40 13:44:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:04 Get A/D filter: -9.255963e+061 result=40 13:44:04 Get A/D value=-858993460 result=40 13:44:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:04 Parameters OK 13:44:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:04 Set A/D data flow result=40 13:44:04 Set A/D channel type result=40 13:44:04 Set A/D encoding result=40 13:44:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:04 Set channel filter=0.000000e+000 result=40 13:44:04 Config A/D Result=40 13:44:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:04 Get A/D filter: -9.255963e+061 result=40 13:44:04 Get A/D value=-858993460 result=40 13:44:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:04 Aux= 13:44:04 Message to Camera, serial 11521 queued 13:44:35 Received message from Master: op=PointingHead serial=11528 13:44:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:44:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:44:35 Point started: ret=0 13:44:35 point_skyscan result=0 13:44:36 Check angles 13:44:36 SkyScan query 13:44:37 SkyScan query done: ret=0 az=152.79<-10186 ze=-21.51<-13434 Statuses=0009 0009 13:44:37 Msec=0 True Az=152.79 Ze=-21.51 Az status=0009 Ze status=0009 13:44:37 Check angles 13:44:37 SkyScan query 13:44:38 SkyScan query done: ret=0 az=135.345<-9023 ze=-0.525<-12035 Statuses=0009 0009 13:44:38 Msec=750 True Az=135.345 Ze=-0.525 Az status=0009 Ze status=0009 13:44:38 Check angles 13:44:38 SkyScan query 13:44:38 SkyScan query done: ret=0 az=117.78<-7852 ze=20.445<-10637 Statuses=0009 0009 13:44:38 Msec=1500 True Az=117.78 Ze=20.445 Az status=0009 Ze status=0009 13:44:38 Check angles 13:44:38 SkyScan query 13:44:39 SkyScan query done: ret=0 az=100.425<-6695 ze=41.385<-9241 Statuses=0009 0009 13:44:39 Msec=2250 True Az=100.425 Ze=41.385 Az status=0009 Ze status=0009 13:44:39 Check angles 13:44:39 SkyScan query 13:44:40 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 13:44:40 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 13:44:40 Check angles 13:44:40 SkyScan query 13:44:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:44:41 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:44:41 Message to Master queued w/err=0: serial=11528 error=0 13:44:46 Received message from Master: op=Filter serial=11529 13:44:46 Color wheel filter change from 0 to 0 13:44:46 FLIGetFilterPos err=0 currentPosition=0 13:44:46 FLIGetStepsRemaining err=0 RemainingSteps=0 13:44:46 Filter is already there-color wheel unchanged 13:44:46 Received message from Master: op=Shutter serial=11530 13:44:46 Shutter LASER close 13:44:46 Received message from Camera: op=State serial=11532 13:44:46 GetSingleValue result=40 Value=cccccccc 13:44:46 SkyScan query 13:44:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:44:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:46 Parameters OK 13:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:46 Set A/D data flow result=40 13:44:46 Set A/D channel type result=40 13:44:46 Set A/D encoding result=40 13:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:46 Set channel filter=0.000000e+000 result=40 13:44:46 Config A/D Result=40 13:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:46 Get A/D filter: -9.255963e+061 result=40 13:44:46 Get A/D value=-858993460 result=40 13:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:44:46 Parameters OK 13:44:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:44:46 Set A/D data flow result=40 13:44:46 Set A/D channel type result=40 13:44:46 Set A/D encoding result=40 13:44:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:44:46 Set channel filter=0.000000e+000 result=40 13:44:46 Config A/D Result=40 13:44:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:44:46 Get A/D filter: -9.255963e+061 result=40 13:44:46 Get A/D value=-858993460 result=40 13:44:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:44:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:44:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:44:46 Aux= 13:44:46 Message to Camera, serial 11532 queued 13:45:17 Received message from Master: op=PointingHead serial=11539 13:45:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:45:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:45:18 Point started: ret=0 13:45:18 point_skyscan result=0 13:45:18 Check angles 13:45:18 SkyScan query 13:45:19 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 13:45:19 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 13:45:19 Check angles 13:45:19 SkyScan query 13:45:20 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 13:45:20 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 13:45:20 Check angles 13:45:20 SkyScan query 13:45:20 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 13:45:20 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 13:45:21 Check angles 13:45:21 SkyScan query 13:45:21 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 13:45:21 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 13:45:21 Check angles 13:45:21 SkyScan query 13:45:22 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:45:22 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:45:22 Check angles 13:45:22 SkyScan query 13:45:23 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:45:23 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:45:23 Message to Master queued w/err=0: serial=11539 error=0 13:45:28 Received message from Master: op=Filter serial=11540 13:45:28 Color wheel filter change from 0 to 0 13:45:28 FLIGetFilterPos err=0 currentPosition=0 13:45:28 FLIGetStepsRemaining err=0 RemainingSteps=0 13:45:28 Filter is already there-color wheel unchanged 13:45:28 Received message from Master: op=Shutter serial=11541 13:45:28 Shutter LASER close 13:45:28 Received message from Camera: op=State serial=11543 13:45:28 GetSingleValue result=40 Value=cccccccc 13:45:28 SkyScan query 13:45:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:45:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:28 Parameters OK 13:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:28 Set A/D data flow result=40 13:45:28 Set A/D channel type result=40 13:45:28 Set A/D encoding result=40 13:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:28 Set channel filter=0.000000e+000 result=40 13:45:28 Config A/D Result=40 13:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:28 Get A/D filter: -9.255963e+061 result=40 13:45:28 Get A/D value=-858993460 result=40 13:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:45:28 Parameters OK 13:45:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:45:28 Set A/D data flow result=40 13:45:28 Set A/D channel type result=40 13:45:28 Set A/D encoding result=40 13:45:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:45:28 Set channel filter=0.000000e+000 result=40 13:45:28 Config A/D Result=40 13:45:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:45:28 Get A/D filter: -9.255963e+061 result=40 13:45:28 Get A/D value=-858993460 result=40 13:45:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:45:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:45:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:45:28 Aux= 13:45:28 Message to Camera, serial 11543 queued 13:45:59 Received message from Master: op=PointingHead serial=11550 13:45:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:45:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:46:00 Point started: ret=0 13:46:00 point_skyscan result=0 13:46:00 Check angles 13:46:00 SkyScan query 13:46:01 SkyScan query done: ret=0 az=152.97<-10198 ze=8.745<-11417 Statuses=0009 0009 13:46:01 Msec=0 True Az=152.97 Ze=8.745 Az status=0009 Ze status=0009 13:46:01 Check angles 13:46:01 SkyScan query 13:46:02 SkyScan query done: ret=0 az=135.6<-9040 ze=-12.165<-12811 Statuses=0009 0009 13:46:02 Msec=750 True Az=135.6 Ze=-12.165 Az status=0009 Ze status=0009 13:46:02 Check angles 13:46:02 SkyScan query 13:46:02 SkyScan query done: ret=0 az=118.08<-7872 ze=-33.135<-14209 Statuses=0009 0009 13:46:02 Msec=1500 True Az=118.08 Ze=-33.135 Az status=0009 Ze status=0009 13:46:03 Check angles 13:46:03 SkyScan query 13:46:03 SkyScan query done: ret=0 az=100.65<-6710 ze=-51.51<-15434 Statuses=0009 0009 13:46:03 Msec=2250 True Az=100.65 Ze=-51.51 Az status=0009 Ze status=0009 13:46:03 Check angles 13:46:03 SkyScan query 13:46:04 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 13:46:04 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 13:46:04 Check angles 13:46:04 SkyScan query 13:46:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:46:05 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:46:05 Message to Master queued w/err=0: serial=11550 error=0 13:46:10 Received message from Master: op=Filter serial=11551 13:46:10 Color wheel filter change from 0 to 0 13:46:10 FLIGetFilterPos err=0 currentPosition=0 13:46:10 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:10 Filter is already there-color wheel unchanged 13:46:10 Received message from Master: op=Shutter serial=11552 13:46:10 Shutter LASER close 13:46:10 Received message from Camera: op=State serial=11554 13:46:10 GetSingleValue result=40 Value=cccccccc 13:46:10 SkyScan query 13:46:11 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:46:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:11 Parameters OK 13:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:11 Set A/D data flow result=40 13:46:11 Set A/D channel type result=40 13:46:11 Set A/D encoding result=40 13:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:11 Set channel filter=0.000000e+000 result=40 13:46:11 Config A/D Result=40 13:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:11 Get A/D filter: -9.255963e+061 result=40 13:46:11 Get A/D value=-858993460 result=40 13:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:11 Parameters OK 13:46:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:11 Set A/D data flow result=40 13:46:11 Set A/D channel type result=40 13:46:11 Set A/D encoding result=40 13:46:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:11 Set channel filter=0.000000e+000 result=40 13:46:11 Config A/D Result=40 13:46:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:11 Get A/D filter: -9.255963e+061 result=40 13:46:11 Get A/D value=-858993460 result=40 13:46:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:11 Aux= 13:46:11 Message to Camera, serial 11554 queued 13:46:41 Received message from Master: op=PointingHead serial=11561 13:46:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:46:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:46:42 Point started: ret=0 13:46:42 point_skyscan result=0 13:46:43 Check angles 13:46:43 SkyScan query 13:46:43 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.27<-17418 Statuses=0009 0009 13:46:43 Msec=0 True Az=108.975 Ze=-81.27 Az status=0009 Ze status=0009 13:46:43 Check angles 13:46:43 SkyScan query 13:46:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 13:46:44 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 13:46:44 Check angles 13:46:44 SkyScan query 13:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 13:46:45 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 13:46:45 Check angles 13:46:45 SkyScan query 13:46:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 13:46:45 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 13:46:46 Check angles 13:46:46 SkyScan query 13:46:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.93<-23062 Statuses=0008 0009 13:46:46 Msec=3000 True Az=112.995 Ze=-165.93 Az status=0008 Ze status=0009 13:46:46 Check angles 13:46:46 SkyScan query 13:46:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:46:47 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:46:47 Message to Master queued w/err=0: serial=11561 error=0 13:46:52 Received message from Master: op=Filter serial=11562 13:46:52 Color wheel filter change from 0 to 0 13:46:52 FLIGetFilterPos err=0 currentPosition=0 13:46:52 FLIGetStepsRemaining err=0 RemainingSteps=0 13:46:52 Filter is already there-color wheel unchanged 13:46:52 Received message from Master: op=Shutter serial=11563 13:46:52 Shutter LASER open 13:46:52 Received message from Camera: op=State serial=11565 13:46:52 GetSingleValue result=40 Value=cccccccc 13:46:52 SkyScan query 13:46:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:46:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:53 Parameters OK 13:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:53 Set A/D data flow result=40 13:46:53 Set A/D channel type result=40 13:46:53 Set A/D encoding result=40 13:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:53 Set channel filter=0.000000e+000 result=40 13:46:53 Config A/D Result=40 13:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:53 Get A/D filter: -9.255963e+061 result=40 13:46:53 Get A/D value=-858993460 result=40 13:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:46:53 Parameters OK 13:46:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:46:53 Set A/D data flow result=40 13:46:53 Set A/D channel type result=40 13:46:53 Set A/D encoding result=40 13:46:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:46:53 Set channel filter=0.000000e+000 result=40 13:46:53 Config A/D Result=40 13:46:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:46:53 Get A/D filter: -9.255963e+061 result=40 13:46:53 Get A/D value=-858993460 result=40 13:46:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:46:53 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:46:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:46:53 Aux= 13:46:53 Message to Camera, serial 11565 queued 13:46:55 Received message from Master: op=Shutter serial=11569 13:46:55 Shutter LASER close 13:46:56 Received message from Master: op=PointingHead serial=11573 13:46:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:46:56 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:46:56 Point started: ret=0 13:46:56 point_skyscan result=0 13:46:57 Check angles 13:46:57 SkyScan query 13:46:57 SkyScan query done: ret=0 az=89.55<-5970 ze=156.84<-1544 Statuses=0009 0009 13:46:57 Msec=0 True Az=89.55 Ze=156.84 Az status=0009 Ze status=0009 13:46:58 Check angles 13:46:58 SkyScan query 13:46:58 SkyScan query done: ret=0 az=72.03<-4802 ze=135.855<-2943 Statuses=0009 0009 13:46:58 Msec=750 True Az=72.03 Ze=135.855 Az status=0009 Ze status=0009 13:46:58 Check angles 13:46:58 SkyScan query 13:46:59 SkyScan query done: ret=0 az=54.75<-3650 ze=114.93<-4338 Statuses=0009 0009 13:46:59 Msec=1500 True Az=54.75 Ze=114.93 Az status=0009 Ze status=0009 13:46:59 Check angles 13:46:59 SkyScan query 13:47:00 SkyScan query done: ret=0 az=40.86<-2724 ze=93.945<-5737 Statuses=0009 0009 13:47:00 Msec=2250 True Az=40.86 Ze=93.945 Az status=0009 Ze status=0009 13:47:00 Check angles 13:47:00 SkyScan query 13:47:00 SkyScan query done: ret=0 az=41.01<-2734 ze=73.005<-7133 Statuses=0008 0009 13:47:00 Msec=3000 True Az=41.01 Ze=73.005 Az status=0008 Ze status=0009 13:47:01 Check angles 13:47:01 SkyScan query 13:47:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 13:47:01 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 13:47:01 Check angles 13:47:01 SkyScan query 13:47:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:47:02 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:47:02 Message to Master queued w/err=0: serial=11573 error=0 13:47:07 Received message from Master: op=Filter serial=11574 13:47:07 Color wheel filter change from 0 to 0 13:47:07 FLIGetFilterPos err=0 currentPosition=0 13:47:07 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:07 Filter is already there-color wheel unchanged 13:47:07 Received message from Master: op=Shutter serial=11575 13:47:07 Shutter LASER close 13:47:07 Received message from Camera: op=State serial=11577 13:47:07 GetSingleValue result=40 Value=cccccccc 13:47:07 SkyScan query 13:47:08 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:08 Parameters OK 13:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:08 Set A/D data flow result=40 13:47:08 Set A/D channel type result=40 13:47:08 Set A/D encoding result=40 13:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:08 Set channel filter=0.000000e+000 result=40 13:47:08 Config A/D Result=40 13:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:08 Get A/D filter: -9.255963e+061 result=40 13:47:08 Get A/D value=-858993460 result=40 13:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:08 Parameters OK 13:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:08 Set A/D data flow result=40 13:47:08 Set A/D channel type result=40 13:47:08 Set A/D encoding result=40 13:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:08 Set channel filter=0.000000e+000 result=40 13:47:08 Config A/D Result=40 13:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:08 Get A/D filter: -9.255963e+061 result=40 13:47:08 Get A/D value=-858993460 result=40 13:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:08 Aux= 13:47:08 Message to Camera, serial 11577 queued 13:47:39 Received message from Master: op=PointingHead serial=11584 13:47:39 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:47:39 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:47:39 Point started: ret=0 13:47:39 point_skyscan result=0 13:47:40 Check angles 13:47:40 SkyScan query 13:47:40 SkyScan query done: ret=0 az=64.23<-4282 ze=66.54<-7564 Statuses=0009 0008 13:47:40 Msec=0 True Az=64.23 Ze=66.54 Az status=0009 Ze status=0008 13:47:41 Check angles 13:47:41 SkyScan query 13:47:41 SkyScan query done: ret=0 az=82.305<-5487 ze=66.495<-7567 Statuses=0009 0008 13:47:41 Msec=750 True Az=82.305 Ze=66.495 Az status=0009 Ze status=0008 13:47:41 Check angles 13:47:41 SkyScan query 13:47:42 SkyScan query done: ret=0 az=99.765<-6651 ze=66.495<-7567 Statuses=0009 0008 13:47:42 Msec=1500 True Az=99.765 Ze=66.495 Az status=0009 Ze status=0008 13:47:42 Check angles 13:47:42 SkyScan query 13:47:43 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 13:47:43 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 13:47:43 Check angles 13:47:43 SkyScan query 13:47:43 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 13:47:43 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 13:47:44 Check angles 13:47:44 SkyScan query 13:47:44 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 13:47:44 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 13:47:44 Check angles 13:47:44 SkyScan query 13:47:45 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:47:45 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:47:45 Message to Master queued w/err=0: serial=11584 error=0 13:47:50 Received message from Master: op=Filter serial=11585 13:47:50 Color wheel filter change from 0 to 0 13:47:50 FLIGetFilterPos err=0 currentPosition=0 13:47:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:47:50 Filter is already there-color wheel unchanged 13:47:50 Received message from Master: op=Shutter serial=11586 13:47:50 Shutter LASER close 13:47:50 Received message from Camera: op=State serial=11588 13:47:50 GetSingleValue result=40 Value=cccccccc 13:47:50 SkyScan query 13:47:51 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:47:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:51 Parameters OK 13:47:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:51 Set A/D data flow result=40 13:47:51 Set A/D channel type result=40 13:47:51 Set A/D encoding result=40 13:47:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:51 Set channel filter=0.000000e+000 result=40 13:47:51 Config A/D Result=40 13:47:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:51 Get A/D filter: -9.255963e+061 result=40 13:47:51 Get A/D value=-858993460 result=40 13:47:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:47:51 Parameters OK 13:47:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:47:51 Set A/D data flow result=40 13:47:51 Set A/D channel type result=40 13:47:51 Set A/D encoding result=40 13:47:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:47:51 Set channel filter=0.000000e+000 result=40 13:47:51 Config A/D Result=40 13:47:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:47:51 Get A/D filter: -9.255963e+061 result=40 13:47:51 Get A/D value=-858993460 result=40 13:47:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:47:51 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:47:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:47:51 Aux= 13:47:51 Message to Camera, serial 11588 queued 13:48:22 Received message from Master: op=PointingHead serial=11595 13:48:22 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:48:22 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:48:22 Point started: ret=0 13:48:22 point_skyscan result=0 13:48:23 Check angles 13:48:23 SkyScan query 13:48:23 SkyScan query done: ret=0 az=134.85<-8990 ze=36.645<-9557 Statuses=0009 0009 13:48:23 Msec=0 True Az=134.85 Ze=36.645 Az status=0009 Ze status=0009 13:48:23 Check angles 13:48:23 SkyScan query 13:48:24 SkyScan query done: ret=0 az=117.045<-7803 ze=15.27<-10982 Statuses=0009 0009 13:48:24 Msec=750 True Az=117.045 Ze=15.27 Az status=0009 Ze status=0009 13:48:24 Check angles 13:48:24 SkyScan query 13:48:25 SkyScan query done: ret=0 az=99.75<-6650 ze=-5.715<-12381 Statuses=0009 0009 13:48:25 Msec=1500 True Az=99.75 Ze=-5.715 Az status=0009 Ze status=0009 13:48:25 Check angles 13:48:25 SkyScan query 13:48:25 SkyScan query done: ret=0 az=82.23<-5482 ze=-26.685<-13779 Statuses=0009 0009 13:48:25 Msec=2250 True Az=82.23 Ze=-26.685 Az status=0009 Ze status=0009 13:48:26 Check angles 13:48:26 SkyScan query 13:48:26 SkyScan query done: ret=0 az=64.365<-4291 ze=-38.565<-14571 Statuses=0009 0008 13:48:26 Msec=3000 True Az=64.365 Ze=-38.565 Az status=0009 Ze status=0008 13:48:26 Check angles 13:48:26 SkyScan query 13:48:27 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.535<-14569 Statuses=0009 0008 13:48:27 Msec=3750 True Az=46.98 Ze=-38.535 Az status=0009 Ze status=0008 13:48:27 Check angles 13:48:27 SkyScan query 13:48:28 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 13:48:28 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 13:48:28 Message to Master queued w/err=0: serial=11595 error=0 13:48:33 Received message from Master: op=Filter serial=11596 13:48:33 Color wheel filter change from 0 to 0 13:48:33 FLIGetFilterPos err=0 currentPosition=0 13:48:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:48:33 Filter is already there-color wheel unchanged 13:48:33 Received message from Master: op=Shutter serial=11597 13:48:33 Shutter LASER close 13:48:33 Received message from Camera: op=State serial=11599 13:48:33 GetSingleValue result=40 Value=cccccccc 13:48:33 SkyScan query 13:48:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:48:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:34 Parameters OK 13:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:34 Set A/D data flow result=40 13:48:34 Set A/D channel type result=40 13:48:34 Set A/D encoding result=40 13:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:34 Set channel filter=0.000000e+000 result=40 13:48:34 Config A/D Result=40 13:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:34 Get A/D filter: -9.255963e+061 result=40 13:48:34 Get A/D value=-858993460 result=40 13:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:48:34 Parameters OK 13:48:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:48:34 Set A/D data flow result=40 13:48:34 Set A/D channel type result=40 13:48:34 Set A/D encoding result=40 13:48:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:48:34 Set channel filter=0.000000e+000 result=40 13:48:34 Config A/D Result=40 13:48:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:48:34 Get A/D filter: -9.255963e+061 result=40 13:48:34 Get A/D value=-858993460 result=40 13:48:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:48:34 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:48:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:48:34 Aux= 13:48:34 Message to Camera, serial 11599 queued 13:49:04 Received message from Master: op=PointingHead serial=11606 13:49:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:49:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:49:05 Point started: ret=0 13:49:05 point_skyscan result=0 13:49:05 Check angles 13:49:05 SkyScan query 13:49:06 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.07<-16538 Statuses=0009 0009 13:49:06 Msec=0 True Az=63.765 Ze=-68.07 Az status=0009 Ze status=0009 13:49:06 Check angles 13:49:06 SkyScan query 13:49:07 SkyScan query done: ret=0 az=81.165<-5411 ze=-88.995<-17933 Statuses=0009 0009 13:49:07 Msec=750 True Az=81.165 Ze=-88.995 Az status=0009 Ze status=0009 13:49:07 Check angles 13:49:07 SkyScan query 13:49:08 SkyScan query done: ret=0 az=98.91<-6594 ze=-109.95<-19330 Statuses=0009 0009 13:49:08 Msec=1500 True Az=98.91 Ze=-109.95 Az status=0009 Ze status=0009 13:49:08 Check angles 13:49:08 SkyScan query 13:49:08 SkyScan query done: ret=0 az=116.265<-7751 ze=-130.905<-20727 Statuses=0009 0009 13:49:08 Msec=2250 True Az=116.265 Ze=-130.905 Az status=0009 Ze status=0009 13:49:08 Check angles 13:49:08 SkyScan query 13:49:09 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.54<-21436 Statuses=0009 0008 13:49:09 Msec=3000 True Az=131.07 Ze=-141.54 Az status=0009 Ze status=0008 13:49:09 Check angles 13:49:09 SkyScan query 13:49:10 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:49:10 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:49:10 Message to Master queued w/err=0: serial=11606 error=0 13:49:15 Received message from Master: op=Filter serial=11607 13:49:15 Color wheel filter change from 0 to 0 13:49:15 FLIGetFilterPos err=0 currentPosition=0 13:49:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:15 Filter is already there-color wheel unchanged 13:49:15 Received message from Master: op=Shutter serial=11608 13:49:15 Shutter LASER close 13:49:15 Received message from Camera: op=State serial=11610 13:49:15 GetSingleValue result=40 Value=cccccccc 13:49:15 SkyScan query 13:49:16 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:49:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:16 Parameters OK 13:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:16 Set A/D data flow result=40 13:49:16 Set A/D channel type result=40 13:49:16 Set A/D encoding result=40 13:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:16 Set channel filter=0.000000e+000 result=40 13:49:16 Config A/D Result=40 13:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:16 Get A/D filter: -9.255963e+061 result=40 13:49:16 Get A/D value=-858993460 result=40 13:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:16 Parameters OK 13:49:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:16 Set A/D data flow result=40 13:49:16 Set A/D channel type result=40 13:49:16 Set A/D encoding result=40 13:49:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:16 Set channel filter=0.000000e+000 result=40 13:49:16 Config A/D Result=40 13:49:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:16 Get A/D filter: -9.255963e+061 result=40 13:49:16 Get A/D value=-858993460 result=40 13:49:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-4 13:49:16] 13:49:16 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:16 Aux= 13:49:16 Message to Camera, serial 11610 queued 13:49:46 Received message from Master: op=PointingHead serial=11617 13:49:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:49:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:49:47 Point started: ret=0 13:49:47 point_skyscan result=0 13:49:48 Check angles 13:49:48 SkyScan query 13:49:48 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.12<-23408 Statuses=0009 0009 13:49:48 Msec=0 True Az=113.025 Ze=-171.12 Az status=0009 Ze status=0009 13:49:48 Check angles 13:49:48 SkyScan query 13:49:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:49:49 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:49:49 Message to Master queued w/err=0: serial=11617 error=0 13:49:54 Received message from Master: op=Filter serial=11618 13:49:54 Color wheel filter change from 0 to 0 13:49:54 FLIGetFilterPos err=0 currentPosition=0 13:49:54 FLIGetStepsRemaining err=0 RemainingSteps=0 13:49:54 Filter is already there-color wheel unchanged 13:49:54 Received message from Master: op=Shutter serial=11619 13:49:54 Shutter LASER open 13:49:54 Received message from Camera: op=State serial=11621 13:49:54 GetSingleValue result=40 Value=cccccccc 13:49:54 SkyScan query 13:49:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:49:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:55 Parameters OK 13:49:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:55 Set A/D data flow result=40 13:49:55 Set A/D channel type result=40 13:49:55 Set A/D encoding result=40 13:49:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:55 Set channel filter=0.000000e+000 result=40 13:49:55 Config A/D Result=40 13:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:55 Get A/D filter: -9.255963e+061 result=40 13:49:55 Get A/D value=-858993460 result=40 13:49:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:49:55 Parameters OK 13:49:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:49:55 Set A/D data flow result=40 13:49:55 Set A/D channel type result=40 13:49:55 Set A/D encoding result=40 13:49:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:49:55 Set channel filter=0.000000e+000 result=40 13:49:55 Config A/D Result=40 13:49:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:49:55 Get A/D filter: -9.255963e+061 result=40 13:49:55 Get A/D value=-858993460 result=40 13:49:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:49:55 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:49:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:49:55 Aux= 13:49:55 Message to Camera, serial 11621 queued 13:49:57 Received message from Master: op=Shutter serial=11625 13:49:57 Shutter LASER close 13:49:58 Received message from Master: op=PointingHead serial=11629 13:49:58 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:49:58 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:49:58 Point started: ret=0 13:49:58 point_skyscan result=0 13:49:59 Check angles 13:49:59 SkyScan query 13:50:00 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.19<-21546 Statuses=0009 0009 13:50:00 Msec=0 True Az=136.155 Ze=-143.19 Az status=0009 Ze status=0009 13:50:00 Check angles 13:50:00 SkyScan query 13:50:00 SkyScan query done: ret=0 az=154.05<-10270 ze=-121.815<-20121 Statuses=0009 0009 13:50:00 Msec=750 True Az=154.05 Ze=-121.815 Az status=0009 Ze status=0009 13:50:00 Check angles 13:50:00 SkyScan query 13:50:01 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.86<-18724 Statuses=0009 0009 13:50:01 Msec=1500 True Az=171.42 Ze=-100.86 Az status=0009 Ze status=0009 13:50:01 Check angles 13:50:01 SkyScan query 13:50:02 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.935<-17329 Statuses=0008 0009 13:50:02 Msec=2250 True Az=176.025 Ze=-79.935 Az status=0008 Ze status=0009 13:50:02 Check angles 13:50:02 SkyScan query 13:50:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.965<-15931 Statuses=0008 0009 13:50:03 Msec=3000 True Az=175.995 Ze=-58.965 Az status=0008 Ze status=0009 13:50:03 Check angles 13:50:03 SkyScan query 13:50:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 13:50:03 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 13:50:03 Message to Master queued w/err=0: serial=11629 error=0 13:50:08 Received message from Master: op=Filter serial=11630 13:50:08 Color wheel filter change from 0 to 0 13:50:08 FLIGetFilterPos err=0 currentPosition=0 13:50:08 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:08 Filter is already there-color wheel unchanged 13:50:08 Received message from Master: op=Shutter serial=11631 13:50:08 Shutter LASER close 13:50:09 Received message from Camera: op=State serial=11633 13:50:09 GetSingleValue result=40 Value=cccccccc 13:50:09 SkyScan query 13:50:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:50:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:09 Parameters OK 13:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:09 Set A/D data flow result=40 13:50:09 Set A/D channel type result=40 13:50:09 Set A/D encoding result=40 13:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:09 Set channel filter=0.000000e+000 result=40 13:50:09 Config A/D Result=40 13:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:09 Get A/D filter: -9.255963e+061 result=40 13:50:09 Get A/D value=-858993460 result=40 13:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:09 Parameters OK 13:50:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:09 Set A/D data flow result=40 13:50:09 Set A/D channel type result=40 13:50:09 Set A/D encoding result=40 13:50:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:09 Set channel filter=0.000000e+000 result=40 13:50:09 Config A/D Result=40 13:50:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:09 Get A/D filter: -9.255963e+061 result=40 13:50:09 Get A/D value=-858993460 result=40 13:50:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:09 Aux= 13:50:09 Message to Camera, serial 11633 queued 13:50:40 Received message from Master: op=PointingHead serial=11640 13:50:40 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:50:40 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:50:40 Point started: ret=0 13:50:40 point_skyscan result=0 13:50:41 Check angles 13:50:41 SkyScan query 13:50:42 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.915<-13461 Statuses=0009 0009 13:50:42 Msec=0 True Az=153.18 Ze=-21.915 Az status=0009 Ze status=0009 13:50:42 Check angles 13:50:42 SkyScan query 13:50:42 SkyScan query done: ret=0 az=135.75<-9050 ze=-0.96<-12064 Statuses=0009 0009 13:50:42 Msec=750 True Az=135.75 Ze=-0.96 Az status=0009 Ze status=0009 13:50:43 Check angles 13:50:43 SkyScan query 13:50:43 SkyScan query done: ret=0 az=118.2<-7880 ze=20.01<-10666 Statuses=0009 0009 13:50:43 Msec=1500 True Az=118.2 Ze=20.01 Az status=0009 Ze status=0009 13:50:43 Check angles 13:50:43 SkyScan query 13:50:44 SkyScan query done: ret=0 az=100.755<-6717 ze=40.95<-9270 Statuses=0009 0009 13:50:44 Msec=2250 True Az=100.755 Ze=40.95 Az status=0009 Ze status=0009 13:50:44 Check angles 13:50:44 SkyScan query 13:50:45 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 13:50:45 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 13:50:45 Check angles 13:50:45 SkyScan query 13:50:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:50:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:50:45 Message to Master queued w/err=0: serial=11640 error=0 13:50:50 Received message from Master: op=Filter serial=11641 13:50:50 Color wheel filter change from 0 to 0 13:50:50 FLIGetFilterPos err=0 currentPosition=0 13:50:50 FLIGetStepsRemaining err=0 RemainingSteps=0 13:50:50 Filter is already there-color wheel unchanged 13:50:51 Received message from Master: op=Shutter serial=11642 13:50:51 Shutter LASER close 13:50:51 Received message from Camera: op=State serial=11644 13:50:51 GetSingleValue result=40 Value=cccccccc 13:50:51 SkyScan query 13:50:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:50:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:51 Parameters OK 13:50:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:51 Set A/D data flow result=40 13:50:51 Set A/D channel type result=40 13:50:51 Set A/D encoding result=40 13:50:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:51 Set channel filter=0.000000e+000 result=40 13:50:51 Config A/D Result=40 13:50:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:51 Get A/D filter: -9.255963e+061 result=40 13:50:51 Get A/D value=-858993460 result=40 13:50:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:50:51 Parameters OK 13:50:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:50:51 Set A/D data flow result=40 13:50:51 Set A/D channel type result=40 13:50:51 Set A/D encoding result=40 13:50:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:50:51 Set channel filter=0.000000e+000 result=40 13:50:51 Config A/D Result=40 13:50:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:50:51 Get A/D filter: -9.255963e+061 result=40 13:50:51 Get A/D value=-858993460 result=40 13:50:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:50:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:50:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:50:51 Aux= 13:50:51 Message to Camera, serial 11644 queued 13:51:22 Received message from Master: op=PointingHead serial=11651 13:51:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:51:22 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:51:22 Point started: ret=0 13:51:22 point_skyscan result=0 13:51:23 Check angles 13:51:23 SkyScan query 13:51:24 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 13:51:24 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 13:51:24 Check angles 13:51:24 SkyScan query 13:51:25 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 13:51:25 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 13:51:25 Check angles 13:51:25 SkyScan query 13:51:25 SkyScan query done: ret=0 az=143.805<-9587 ze=38.505<-9433 Statuses=0009 0008 13:51:25 Msec=1500 True Az=143.805 Ze=38.505 Az status=0009 Ze status=0008 13:51:25 Check angles 13:51:25 SkyScan query 13:51:26 SkyScan query done: ret=0 az=161.28<-10752 ze=38.505<-9433 Statuses=0009 0008 13:51:26 Msec=2250 True Az=161.28 Ze=38.505 Az status=0009 Ze status=0008 13:51:26 Check angles 13:51:26 SkyScan query 13:51:27 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 13:51:27 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 13:51:27 Check angles 13:51:27 SkyScan query 13:51:28 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:51:28 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:51:28 Message to Master queued w/err=0: serial=11651 error=0 13:51:33 Received message from Master: op=Filter serial=11652 13:51:33 Color wheel filter change from 0 to 0 13:51:33 FLIGetFilterPos err=0 currentPosition=0 13:51:33 FLIGetStepsRemaining err=0 RemainingSteps=0 13:51:33 Filter is already there-color wheel unchanged 13:51:33 Received message from Master: op=Shutter serial=11653 13:51:33 Shutter LASER close 13:51:33 Received message from Camera: op=State serial=11655 13:51:33 GetSingleValue result=40 Value=cccccccc 13:51:33 SkyScan query 13:51:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:51:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:33 Parameters OK 13:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:33 Set A/D data flow result=40 13:51:33 Set A/D channel type result=40 13:51:33 Set A/D encoding result=40 13:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:33 Set channel filter=0.000000e+000 result=40 13:51:33 Config A/D Result=40 13:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:33 Get A/D filter: -9.255963e+061 result=40 13:51:33 Get A/D value=-858993460 result=40 13:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:51:33 Parameters OK 13:51:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:51:33 Set A/D data flow result=40 13:51:33 Set A/D channel type result=40 13:51:33 Set A/D encoding result=40 13:51:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:51:33 Set channel filter=0.000000e+000 result=40 13:51:33 Config A/D Result=40 13:51:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:51:33 Get A/D filter: -9.255963e+061 result=40 13:51:33 Get A/D value=-858993460 result=40 13:51:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:51:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:51:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:51:33 Aux= 13:51:33 Message to Camera, serial 11655 queued 13:51:49 Received message from Master: op=Identify serial=11656 13:52:04 Received message from Master: op=PointingHead serial=11665 13:52:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:52:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:52:05 Point started: ret=0 13:52:05 point_skyscan result=0 13:52:05 Check angles 13:52:05 SkyScan query 13:52:06 SkyScan query done: ret=0 az=153.18<-10212 ze=8.91<-11406 Statuses=0009 0009 13:52:06 Msec=0 True Az=153.18 Ze=8.91 Az status=0009 Ze status=0009 13:52:06 Check angles 13:52:06 SkyScan query 13:52:07 SkyScan query done: ret=0 az=135.75<-9050 ze=-12.03<-12802 Statuses=0009 0009 13:52:07 Msec=750 True Az=135.75 Ze=-12.03 Az status=0009 Ze status=0009 13:52:07 Check angles 13:52:07 SkyScan query 13:52:07 SkyScan query done: ret=0 az=117.81<-7854 ze=-33.405<-14227 Statuses=0009 0009 13:52:07 Msec=1500 True Az=117.81 Ze=-33.405 Az status=0009 Ze status=0009 13:52:08 Check angles 13:52:08 SkyScan query 13:52:08 SkyScan query done: ret=0 az=100.425<-6695 ze=-51.54<-15436 Statuses=0009 0009 13:52:08 Msec=2250 True Az=100.425 Ze=-51.54 Az status=0009 Ze status=0009 13:52:08 Check angles 13:52:08 SkyScan query 13:52:09 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 13:52:09 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 [UTC 2018-12-4 13:52:09] 13:52:09 Check angles 13:52:09 SkyScan query 13:52:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:52:10 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:52:10 Message to Master queued w/err=0: serial=11665 error=0 13:52:15 Received message from Master: op=Filter serial=11666 13:52:15 Color wheel filter change from 0 to 0 13:52:15 FLIGetFilterPos err=0 currentPosition=0 13:52:15 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:15 Filter is already there-color wheel unchanged 13:52:15 Received message from Master: op=Shutter serial=11667 13:52:15 Shutter LASER close 13:52:15 Received message from Camera: op=State serial=11669 13:52:15 GetSingleValue result=40 Value=cccccccc 13:52:15 SkyScan query 13:52:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:52:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:15 Parameters OK 13:52:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:15 Set A/D data flow result=40 13:52:15 Set A/D channel type result=40 13:52:15 Set A/D encoding result=40 13:52:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:15 Set channel filter=0.000000e+000 result=40 13:52:15 Config A/D Result=40 13:52:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:15 Get A/D filter: -9.255963e+061 result=40 13:52:15 Get A/D value=-858993460 result=40 13:52:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:15 Parameters OK 13:52:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:15 Set A/D data flow result=40 13:52:15 Set A/D channel type result=40 13:52:15 Set A/D encoding result=40 13:52:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:15 Set channel filter=0.000000e+000 result=40 13:52:15 Config A/D Result=40 13:52:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:15 Get A/D filter: -9.255963e+061 result=40 13:52:15 Get A/D value=-858993460 result=40 13:52:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:15 Aux= 13:52:15 Message to Camera, serial 11669 queued 13:52:46 Received message from Master: op=PointingHead serial=11676 13:52:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:52:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:52:47 Point started: ret=0 13:52:47 point_skyscan result=0 13:52:47 Check angles 13:52:47 SkyScan query 13:52:48 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.825<-17455 Statuses=0009 0009 13:52:48 Msec=0 True Az=109.425 Ze=-81.825 Az status=0009 Ze status=0009 13:52:48 Check angles 13:52:48 SkyScan query 13:52:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 13:52:49 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 13:52:49 Check angles 13:52:49 SkyScan query 13:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 13:52:50 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 13:52:50 Check angles 13:52:50 SkyScan query 13:52:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 13:52:50 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 13:52:50 Check angles 13:52:50 SkyScan query 13:52:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.63<-23042 Statuses=0008 0009 13:52:51 Msec=3000 True Az=112.995 Ze=-165.63 Az status=0008 Ze status=0009 13:52:51 Check angles 13:52:51 SkyScan query 13:52:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:52:52 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:52:52 Message to Master queued w/err=0: serial=11676 error=0 13:52:57 Received message from Master: op=Filter serial=11677 13:52:57 Color wheel filter change from 0 to 0 13:52:57 FLIGetFilterPos err=0 currentPosition=0 13:52:57 FLIGetStepsRemaining err=0 RemainingSteps=0 13:52:57 Filter is already there-color wheel unchanged 13:52:57 Received message from Master: op=Shutter serial=11678 13:52:57 Shutter LASER open 13:52:57 Received message from Camera: op=State serial=11680 13:52:57 GetSingleValue result=40 Value=cccccccc 13:52:57 SkyScan query 13:52:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:52:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:58 Parameters OK 13:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:58 Set A/D data flow result=40 13:52:58 Set A/D channel type result=40 13:52:58 Set A/D encoding result=40 13:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:58 Set channel filter=0.000000e+000 result=40 13:52:58 Config A/D Result=40 13:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:58 Get A/D filter: -9.255963e+061 result=40 13:52:58 Get A/D value=-858993460 result=40 13:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:52:58 Parameters OK 13:52:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:52:58 Set A/D data flow result=40 13:52:58 Set A/D channel type result=40 13:52:58 Set A/D encoding result=40 13:52:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:52:58 Set channel filter=0.000000e+000 result=40 13:52:58 Config A/D Result=40 13:52:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:52:58 Get A/D filter: -9.255963e+061 result=40 13:52:58 Get A/D value=-858993460 result=40 13:52:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:52:58 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:52:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:52:58 Aux= 13:52:58 Message to Camera, serial 11680 queued 13:53:00 Received message from Master: op=Shutter serial=11684 13:53:00 Shutter LASER close 13:53:01 Received message from Master: op=PointingHead serial=11688 13:53:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:53:01 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:53:01 Point started: ret=0 13:53:01 point_skyscan result=0 13:53:02 Check angles 13:53:02 SkyScan query 13:53:02 SkyScan query done: ret=0 az=89.925<-5995 ze=157.38<-1508 Statuses=0009 0009 13:53:02 Msec=0 True Az=89.925 Ze=157.38 Az status=0009 Ze status=0009 13:53:02 Check angles 13:53:02 SkyScan query 13:53:03 SkyScan query done: ret=0 az=72.675<-4845 ze=136.425<-2905 Statuses=0009 0009 13:53:03 Msec=750 True Az=72.675 Ze=136.425 Az status=0009 Ze status=0009 13:53:03 Check angles 13:53:03 SkyScan query 13:53:04 SkyScan query done: ret=0 az=54.75<-3650 ze=115.05<-4330 Statuses=0009 0009 13:53:04 Msec=1500 True Az=54.75 Ze=115.05 Az status=0009 Ze status=0009 13:53:04 Check angles 13:53:04 SkyScan query 13:53:04 SkyScan query done: ret=0 az=40.845<-2723 ze=94.095<-5727 Statuses=0009 0009 13:53:04 Msec=2250 True Az=40.845 Ze=94.095 Az status=0009 Ze status=0009 13:53:05 Check angles 13:53:05 SkyScan query 13:53:05 SkyScan query done: ret=0 az=41.01<-2734 ze=73.11<-7126 Statuses=0008 0009 13:53:05 Msec=3000 True Az=41.01 Ze=73.11 Az status=0008 Ze status=0009 13:53:05 Check angles 13:53:05 SkyScan query 13:53:06 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 13:53:06 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 13:53:06 Check angles 13:53:06 SkyScan query 13:53:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:53:07 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:53:07 Message to Master queued w/err=0: serial=11688 error=0 13:53:12 Received message from Master: op=Filter serial=11689 13:53:12 Color wheel filter change from 0 to 0 13:53:12 FLIGetFilterPos err=0 currentPosition=0 13:53:12 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:12 Filter is already there-color wheel unchanged 13:53:12 Received message from Master: op=Shutter serial=11690 13:53:12 Shutter LASER close 13:53:12 Received message from Camera: op=State serial=11692 13:53:12 GetSingleValue result=40 Value=cccccccc 13:53:12 SkyScan query 13:53:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:53:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:13 Parameters OK 13:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:13 Set A/D data flow result=40 13:53:13 Set A/D channel type result=40 13:53:13 Set A/D encoding result=40 13:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:13 Set channel filter=0.000000e+000 result=40 13:53:13 Config A/D Result=40 13:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:13 Get A/D filter: -9.255963e+061 result=40 13:53:13 Get A/D value=-858993460 result=40 13:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:13 Parameters OK 13:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:13 Set A/D data flow result=40 13:53:13 Set A/D channel type result=40 13:53:13 Set A/D encoding result=40 13:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:13 Set channel filter=0.000000e+000 result=40 13:53:13 Config A/D Result=40 13:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:13 Get A/D filter: -9.255963e+061 result=40 13:53:13 Get A/D value=-858993460 result=40 13:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:13 Aux= 13:53:13 Message to Camera, serial 11692 queued 13:53:43 Received message from Master: op=PointingHead serial=11699 13:53:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:53:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:53:44 Point started: ret=0 13:53:44 point_skyscan result=0 13:53:45 Check angles 13:53:45 SkyScan query 13:53:45 SkyScan query done: ret=0 az=63.765<-4251 ze=66.555<-7563 Statuses=0009 0008 13:53:45 Msec=0 True Az=63.765 Ze=66.555 Az status=0009 Ze status=0008 13:53:45 Check angles 13:53:45 SkyScan query 13:53:46 SkyScan query done: ret=0 az=81.03<-5402 ze=66.495<-7567 Statuses=0009 0008 13:53:46 Msec=750 True Az=81.03 Ze=66.495 Az status=0009 Ze status=0008 13:53:46 Check angles 13:53:46 SkyScan query 13:53:47 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 13:53:47 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 13:53:47 Check angles 13:53:47 SkyScan query 13:53:47 SkyScan query done: ret=0 az=116.565<-7771 ze=66.495<-7567 Statuses=0009 0008 13:53:47 Msec=2250 True Az=116.565 Ze=66.495 Az status=0009 Ze status=0008 13:53:48 Check angles 13:53:48 SkyScan query 13:53:48 SkyScan query done: ret=0 az=134.01<-8934 ze=66.495<-7567 Statuses=0009 0008 13:53:48 Msec=3000 True Az=134.01 Ze=66.495 Az status=0009 Ze status=0008 13:53:48 Check angles 13:53:48 SkyScan query 13:53:49 SkyScan query done: ret=0 az=151.305<-10087 ze=66.495<-7567 Statuses=0009 0008 13:53:49 Msec=3750 True Az=151.305 Ze=66.495 Az status=0009 Ze status=0008 13:53:49 Check angles 13:53:49 SkyScan query 13:53:50 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 13:53:50 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 13:53:50 Message to Master queued w/err=0: serial=11699 error=0 13:53:55 Received message from Master: op=Filter serial=11700 13:53:55 Color wheel filter change from 0 to 0 13:53:55 FLIGetFilterPos err=0 currentPosition=0 13:53:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:53:55 Filter is already there-color wheel unchanged 13:53:55 Received message from Master: op=Shutter serial=11701 13:53:55 Shutter LASER close 13:53:55 Received message from Camera: op=State serial=11703 13:53:55 GetSingleValue result=40 Value=cccccccc 13:53:55 SkyScan query 13:53:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 13:53:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:55 Parameters OK 13:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:55 Set A/D data flow result=40 13:53:55 Set A/D channel type result=40 13:53:55 Set A/D encoding result=40 13:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:55 Set channel filter=0.000000e+000 result=40 13:53:55 Config A/D Result=40 13:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:55 Get A/D filter: -9.255963e+061 result=40 13:53:55 Get A/D value=-858993460 result=40 13:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:53:55 Parameters OK 13:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:53:55 Set A/D data flow result=40 13:53:55 Set A/D channel type result=40 13:53:55 Set A/D encoding result=40 13:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:53:55 Set channel filter=0.000000e+000 result=40 13:53:55 Config A/D Result=40 13:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:53:55 Get A/D filter: -9.255963e+061 result=40 13:53:55 Get A/D value=-858993460 result=40 13:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:53:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:53:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:53:55 Aux= 13:53:55 Message to Camera, serial 11703 queued 13:54:26 Received message from Master: op=PointingHead serial=11710 13:54:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 13:54:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 13:54:27 Point started: ret=0 13:54:27 point_skyscan result=0 13:54:27 Check angles 13:54:27 SkyScan query 13:54:28 SkyScan query done: ret=0 az=134.865<-8991 ze=36.585<-9561 Statuses=0009 0009 13:54:28 Msec=0 True Az=134.865 Ze=36.585 Az status=0009 Ze status=0009 13:54:28 Check angles 13:54:28 SkyScan query 13:54:29 SkyScan query done: ret=0 az=117.045<-7803 ze=15.21<-10986 Statuses=0009 0009 13:54:29 Msec=750 True Az=117.045 Ze=15.21 Az status=0009 Ze status=0009 13:54:29 Check angles 13:54:29 SkyScan query 13:54:30 SkyScan query done: ret=0 az=99.285<-6619 ze=-6.195<-12413 Statuses=0009 0009 13:54:30 Msec=1500 True Az=99.285 Ze=-6.195 Az status=0009 Ze status=0009 13:54:30 Check angles 13:54:30 SkyScan query 13:54:30 SkyScan query done: ret=0 az=81.81<-5454 ze=-27.12<-13808 Statuses=0009 0009 13:54:30 Msec=2250 True Az=81.81 Ze=-27.12 Az status=0009 Ze status=0009 13:54:30 Check angles 13:54:30 SkyScan query 13:54:31 SkyScan query done: ret=0 az=64.38<-4292 ze=-38.565<-14571 Statuses=0009 0008 13:54:31 Msec=3000 True Az=64.38 Ze=-38.565 Az status=0009 Ze status=0008 13:54:31 Check angles 13:54:31 SkyScan query 13:54:32 SkyScan query done: ret=0 az=46.575<-3105 ze=-38.52<-14568 Statuses=0009 0008 13:54:32 Msec=3750 True Az=46.575 Ze=-38.52 Az status=0009 Ze status=0008 13:54:32 Check angles 13:54:32 SkyScan query 13:54:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:54:33 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 13:54:33 Message to Master queued w/err=0: serial=11710 error=0 13:54:38 Received message from Master: op=Filter serial=11711 13:54:38 Color wheel filter change from 0 to 0 13:54:38 FLIGetFilterPos err=0 currentPosition=0 13:54:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:54:38 Filter is already there-color wheel unchanged 13:54:38 Received message from Master: op=Shutter serial=11712 13:54:38 Shutter LASER close 13:54:38 Received message from Camera: op=State serial=11714 13:54:38 GetSingleValue result=40 Value=cccccccc 13:54:38 SkyScan query 13:54:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 13:54:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:38 Parameters OK 13:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:38 Set A/D data flow result=40 13:54:38 Set A/D channel type result=40 13:54:38 Set A/D encoding result=40 13:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:38 Set channel filter=0.000000e+000 result=40 13:54:38 Config A/D Result=40 13:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:38 Get A/D filter: -9.255963e+061 result=40 13:54:38 Get A/D value=-858993460 result=40 13:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:54:38 Parameters OK 13:54:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:54:38 Set A/D data flow result=40 13:54:38 Set A/D channel type result=40 13:54:38 Set A/D encoding result=40 13:54:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:54:38 Set channel filter=0.000000e+000 result=40 13:54:38 Config A/D Result=40 13:54:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:54:38 Get A/D filter: -9.255963e+061 result=40 13:54:38 Get A/D value=-858993460 result=40 13:54:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:54:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:54:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:54:38 Aux= 13:54:38 Message to Camera, serial 11714 queued 13:55:09 Received message from Master: op=PointingHead serial=11721 13:55:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 13:55:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 13:55:10 Point started: ret=0 13:55:10 point_skyscan result=0 13:55:10 Check angles 13:55:10 SkyScan query 13:55:11 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.31<-16554 Statuses=0009 0009 13:55:11 Msec=0 True Az=63.87 Ze=-68.31 Az status=0009 Ze status=0009 13:55:11 Check angles 13:55:11 SkyScan query 13:55:12 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.7<-17980 Statuses=0009 0009 13:55:12 Msec=750 True Az=81.825 Ze=-89.7 Az status=0009 Ze status=0009 13:55:12 Check angles 13:55:12 SkyScan query 13:55:12 SkyScan query done: ret=0 az=99.765<-6651 ze=-111.09<-19406 Statuses=0009 0009 13:55:12 Msec=1500 True Az=99.765 Ze=-111.09 Az status=0009 Ze status=0009 13:55:13 Check angles 13:55:13 SkyScan query 13:55:13 SkyScan query done: ret=0 az=117.15<-7810 ze=-132.045<-20803 Statuses=0009 0009 13:55:13 Msec=2250 True Az=117.15 Ze=-132.045 Az status=0009 Ze status=0009 13:55:13 Check angles 13:55:13 SkyScan query 13:55:14 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 13:55:14 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 13:55:14 Check angles 13:55:14 SkyScan query 13:55:15 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 13:55:15 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 13:55:15 Message to Master queued w/err=0: serial=11721 error=0 13:55:20 Received message from Master: op=Filter serial=11722 13:55:20 Color wheel filter change from 0 to 0 13:55:20 FLIGetFilterPos err=0 currentPosition=0 13:55:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:20 Filter is already there-color wheel unchanged 13:55:20 Received message from Master: op=Shutter serial=11723 13:55:20 Shutter LASER close 13:55:20 Received message from Camera: op=State serial=11725 13:55:20 GetSingleValue result=40 Value=cccccccc 13:55:20 SkyScan query 13:55:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 13:55:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:20 Parameters OK 13:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:20 Set A/D data flow result=40 13:55:20 Set A/D channel type result=40 13:55:20 Set A/D encoding result=40 13:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:20 Set channel filter=0.000000e+000 result=40 13:55:20 Config A/D Result=40 13:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:20 Get A/D filter: -9.255963e+061 result=40 13:55:20 Get A/D value=-858993460 result=40 13:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:55:20 Parameters OK 13:55:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:55:20 Set A/D data flow result=40 13:55:20 Set A/D channel type result=40 13:55:20 Set A/D encoding result=40 13:55:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:55:20 Set channel filter=0.000000e+000 result=40 13:55:20 Config A/D Result=40 13:55:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:55:20 Get A/D filter: -9.255963e+061 result=40 13:55:20 Get A/D value=-858993460 result=40 13:55:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:55:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:55:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:55:20 Aux= 13:55:20 Message to Camera, serial 11725 queued 13:55:51 Received message from Master: op=PointingHead serial=11732 13:55:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:55:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:55:52 Point started: ret=0 13:55:52 point_skyscan result=0 13:55:52 Check angles 13:55:52 SkyScan query 13:55:53 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 13:55:53 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 13:55:53 Check angles 13:55:53 SkyScan query 13:55:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 13:55:54 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 13:55:54 Message to Master queued w/err=0: serial=11732 error=0 13:55:59 Received message from Master: op=Filter serial=11733 13:55:59 Color wheel filter change from 0 to 0 13:55:59 FLIGetFilterPos err=0 currentPosition=0 13:55:59 FLIGetStepsRemaining err=0 RemainingSteps=0 13:55:59 Filter is already there-color wheel unchanged 13:55:59 Received message from Master: op=Shutter serial=11734 13:55:59 Shutter LASER open 13:55:59 Received message from Camera: op=State serial=11736 13:55:59 GetSingleValue result=40 Value=cccccccc 13:55:59 SkyScan query 13:56:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:56:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:00 Parameters OK 13:56:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:00 Set A/D data flow result=40 13:56:00 Set A/D channel type result=40 13:56:00 Set A/D encoding result=40 13:56:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:00 Set channel filter=0.000000e+000 result=40 13:56:00 Config A/D Result=40 13:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:00 Get A/D filter: -9.255963e+061 result=40 13:56:00 Get A/D value=-858993460 result=40 13:56:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:00 Parameters OK 13:56:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:00 Set A/D data flow result=40 13:56:00 Set A/D channel type result=40 13:56:00 Set A/D encoding result=40 13:56:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:00 Set channel filter=0.000000e+000 result=40 13:56:00 Config A/D Result=40 13:56:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:00 Get A/D filter: -9.255963e+061 result=40 13:56:00 Get A/D value=-858993460 result=40 13:56:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:00 Aux= 13:56:00 Message to Camera, serial 11736 queued 13:56:02 Received message from Master: op=Shutter serial=11740 13:56:02 Shutter LASER close 13:56:03 Received message from Master: op=PointingHead serial=11744 13:56:03 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 13:56:03 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 13:56:03 Point started: ret=0 13:56:03 point_skyscan result=0 13:56:04 Check angles 13:56:04 SkyScan query 13:56:04 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.49<-21566 Statuses=0009 0009 13:56:04 Msec=0 True Az=135.735 Ze=-143.49 Az status=0009 Ze status=0009 13:56:05 Check angles 13:56:05 SkyScan query 13:56:05 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.535<-20169 Statuses=0009 0009 13:56:05 Msec=750 True Az=153.24 Ze=-122.535 Az status=0009 Ze status=0009 13:56:05 Check angles 13:56:05 SkyScan query 13:56:06 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.595<-18773 Statuses=0009 0009 13:56:06 Msec=1500 True Az=170.73 Ze=-101.595 Az status=0009 Ze status=0009 13:56:06 Check angles 13:56:06 SkyScan query 13:56:07 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.61<-17374 Statuses=0008 0009 13:56:07 Msec=2250 True Az=176.025 Ze=-80.61 Az status=0008 Ze status=0009 13:56:07 Check angles 13:56:07 SkyScan query 13:56:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.235<-15949 Statuses=0008 0009 13:56:07 Msec=3000 True Az=175.995 Ze=-59.235 Az status=0008 Ze status=0009 13:56:08 Check angles 13:56:08 SkyScan query 13:56:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 13:56:08 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 13:56:08 Message to Master queued w/err=0: serial=11744 error=0 13:56:13 Received message from Master: op=Filter serial=11745 13:56:13 Color wheel filter change from 0 to 0 13:56:13 FLIGetFilterPos err=0 currentPosition=0 13:56:13 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:13 Filter is already there-color wheel unchanged 13:56:13 Received message from Master: op=Shutter serial=11746 13:56:13 Shutter LASER close 13:56:14 Received message from Camera: op=State serial=11748 13:56:14 GetSingleValue result=40 Value=cccccccc 13:56:14 SkyScan query 13:56:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 13:56:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:14 Parameters OK 13:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:14 Set A/D data flow result=40 13:56:14 Set A/D channel type result=40 13:56:14 Set A/D encoding result=40 13:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:14 Set channel filter=0.000000e+000 result=40 13:56:14 Config A/D Result=40 13:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:14 Get A/D filter: -9.255963e+061 result=40 13:56:14 Get A/D value=-858993460 result=40 13:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:14 Parameters OK 13:56:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:14 Set A/D data flow result=40 13:56:14 Set A/D channel type result=40 13:56:14 Set A/D encoding result=40 13:56:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:14 Set channel filter=0.000000e+000 result=40 13:56:14 Config A/D Result=40 13:56:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:14 Get A/D filter: -9.255963e+061 result=40 13:56:14 Get A/D value=-858993460 result=40 13:56:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:14 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:14 Aux= 13:56:14 Message to Camera, serial 11748 queued 13:56:45 Received message from Master: op=PointingHead serial=11755 13:56:45 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 13:56:45 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 13:56:45 Point started: ret=0 13:56:45 point_skyscan result=0 13:56:46 Check angles 13:56:46 SkyScan query 13:56:47 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.765<-13451 Statuses=0009 0009 13:56:47 Msec=0 True Az=152.775 Ze=-21.765 Az status=0009 Ze status=0009 13:56:47 Check angles 13:56:47 SkyScan query 13:56:47 SkyScan query done: ret=0 az=135.39<-9026 ze=-0.81<-12054 Statuses=0009 0009 13:56:47 Msec=750 True Az=135.39 Ze=-0.81 Az status=0009 Ze status=0009 13:56:48 Check angles 13:56:48 SkyScan query 13:56:48 SkyScan query done: ret=0 az=117.81<-7854 ze=20.16<-10656 Statuses=0009 0009 13:56:48 Msec=1500 True Az=117.81 Ze=20.16 Az status=0009 Ze status=0009 13:56:48 Check angles 13:56:48 SkyScan query 13:56:49 SkyScan query done: ret=0 az=100.41<-6694 ze=41.1<-9260 Statuses=0009 0009 13:56:49 Msec=2250 True Az=100.41 Ze=41.1 Az status=0009 Ze status=0009 13:56:49 Check angles 13:56:49 SkyScan query 13:56:50 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 13:56:50 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 13:56:50 Check angles 13:56:50 SkyScan query 13:56:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 13:56:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 13:56:50 Message to Master queued w/err=0: serial=11755 error=0 13:56:55 Received message from Master: op=Filter serial=11756 13:56:55 Color wheel filter change from 0 to 0 13:56:55 FLIGetFilterPos err=0 currentPosition=0 13:56:55 FLIGetStepsRemaining err=0 RemainingSteps=0 13:56:55 Filter is already there-color wheel unchanged 13:56:56 Received message from Master: op=Shutter serial=11757 13:56:56 Shutter LASER close 13:56:56 Received message from Camera: op=State serial=11759 13:56:56 GetSingleValue result=40 Value=cccccccc 13:56:56 SkyScan query 13:56:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 13:56:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:56 Parameters OK 13:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:56 Set A/D data flow result=40 13:56:56 Set A/D channel type result=40 13:56:56 Set A/D encoding result=40 13:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:56 Set channel filter=0.000000e+000 result=40 13:56:56 Config A/D Result=40 13:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:56 Get A/D filter: -9.255963e+061 result=40 13:56:56 Get A/D value=-858993460 result=40 13:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:56:56 Parameters OK 13:56:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:56:56 Set A/D data flow result=40 13:56:56 Set A/D channel type result=40 13:56:56 Set A/D encoding result=40 13:56:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:56:56 Set channel filter=0.000000e+000 result=40 13:56:56 Config A/D Result=40 13:56:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:56:56 Get A/D filter: -9.255963e+061 result=40 13:56:56 Get A/D value=-858993460 result=40 13:56:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:56:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:56:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:56:56 Aux= 13:56:56 Message to Camera, serial 11759 queued 13:57:27 Received message from Master: op=PointingHead serial=11766 13:57:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 13:57:27 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 13:57:27 Point started: ret=0 13:57:27 point_skyscan result=0 13:57:28 Check angles 13:57:28 SkyScan query 13:57:29 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 13:57:29 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 13:57:29 Check angles 13:57:29 SkyScan query 13:57:30 SkyScan query done: ret=0 az=126.99<-8466 ze=38.505<-9433 Statuses=0009 0008 13:57:30 Msec=750 True Az=126.99 Ze=38.505 Az status=0009 Ze status=0008 13:57:30 Check angles 13:57:30 SkyScan query 13:57:30 SkyScan query done: ret=0 az=144.42<-9628 ze=38.505<-9433 Statuses=0009 0008 13:57:30 Msec=1500 True Az=144.42 Ze=38.505 Az status=0009 Ze status=0008 13:57:30 Check angles 13:57:30 SkyScan query 13:57:31 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 13:57:31 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 13:57:31 Check angles 13:57:31 SkyScan query 13:57:32 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 13:57:32 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 13:57:32 Check angles 13:57:32 SkyScan query 13:57:33 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 13:57:33 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 13:57:33 Message to Master queued w/err=0: serial=11766 error=0 13:57:38 Received message from Master: op=Filter serial=11767 13:57:38 Color wheel filter change from 0 to 0 13:57:38 FLIGetFilterPos err=0 currentPosition=0 13:57:38 FLIGetStepsRemaining err=0 RemainingSteps=0 13:57:38 Filter is already there-color wheel unchanged 13:57:38 Received message from Master: op=Shutter serial=11768 13:57:38 Shutter LASER close 13:57:38 Received message from Camera: op=State serial=11770 13:57:38 GetSingleValue result=40 Value=cccccccc 13:57:38 SkyScan query 13:57:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 13:57:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:38 Parameters OK 13:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:38 Set A/D data flow result=40 13:57:38 Set A/D channel type result=40 13:57:38 Set A/D encoding result=40 13:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:38 Set channel filter=0.000000e+000 result=40 13:57:38 Config A/D Result=40 13:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:38 Get A/D filter: -9.255963e+061 result=40 13:57:38 Get A/D value=-858993460 result=40 13:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:57:38 Parameters OK 13:57:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:57:38 Set A/D data flow result=40 13:57:38 Set A/D channel type result=40 13:57:38 Set A/D encoding result=40 13:57:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:57:38 Set channel filter=0.000000e+000 result=40 13:57:38 Config A/D Result=40 13:57:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:57:38 Get A/D filter: -9.255963e+061 result=40 13:57:38 Get A/D value=-858993460 result=40 13:57:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:57:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:57:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:57:38 Aux= 13:57:38 Message to Camera, serial 11770 queued 13:58:09 Received message from Master: op=PointingHead serial=11777 13:58:09 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 13:58:09 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 13:58:10 Point started: ret=0 13:58:10 point_skyscan result=0 13:58:10 Check angles 13:58:10 SkyScan query 13:58:11 SkyScan query done: ret=0 az=152.76<-10184 ze=8.4<-11440 Statuses=0009 0009 13:58:11 Msec=0 True Az=152.76 Ze=8.4 Az status=0009 Ze status=0009 13:58:11 Check angles 13:58:11 SkyScan query 13:58:12 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.57<-12838 Statuses=0009 0009 13:58:12 Msec=750 True Az=135.24 Ze=-12.57 Az status=0009 Ze status=0009 13:58:12 Check angles 13:58:12 SkyScan query 13:58:12 SkyScan query done: ret=0 az=117.63<-7842 ze=-33.555<-14237 Statuses=0009 0009 13:58:12 Msec=1500 True Az=117.63 Ze=-33.555 Az status=0009 Ze status=0009 13:58:13 Check angles 13:58:13 SkyScan query 13:58:13 SkyScan query done: ret=0 az=100.26<-6684 ze=-51.54<-15436 Statuses=0009 0009 13:58:13 Msec=2250 True Az=100.26 Ze=-51.54 Az status=0009 Ze status=0009 13:58:13 Check angles 13:58:13 SkyScan query 13:58:14 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 13:58:14 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 13:58:14 Check angles 13:58:14 SkyScan query 13:58:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:58:15 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 13:58:15 Message to Master queued w/err=0: serial=11777 error=0 13:58:20 Received message from Master: op=Filter serial=11778 13:58:20 Color wheel filter change from 0 to 0 13:58:20 FLIGetFilterPos err=0 currentPosition=0 13:58:20 FLIGetStepsRemaining err=0 RemainingSteps=0 13:58:20 Filter is already there-color wheel unchanged 13:58:20 Received message from Master: op=Shutter serial=11779 13:58:20 Shutter LASER close 13:58:20 Received message from Camera: op=State serial=11781 13:58:20 GetSingleValue result=40 Value=cccccccc 13:58:20 SkyScan query 13:58:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 13:58:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:20 Parameters OK 13:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:20 Set A/D data flow result=40 13:58:20 Set A/D channel type result=40 13:58:20 Set A/D encoding result=40 13:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:20 Set channel filter=0.000000e+000 result=40 13:58:20 Config A/D Result=40 13:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:20 Get A/D filter: -9.255963e+061 result=40 13:58:20 Get A/D value=-858993460 result=40 13:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:58:20 Parameters OK 13:58:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:58:20 Set A/D data flow result=40 13:58:20 Set A/D channel type result=40 13:58:20 Set A/D encoding result=40 13:58:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:58:20 Set channel filter=0.000000e+000 result=40 13:58:20 Config A/D Result=40 13:58:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:58:20 Get A/D filter: -9.255963e+061 result=40 13:58:20 Get A/D value=-858993460 result=40 13:58:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:58:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:58:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:58:20 Aux= 13:58:20 Message to Camera, serial 11781 queued 13:58:51 Received message from Master: op=PointingHead serial=11788 13:58:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 13:58:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 13:58:52 Point started: ret=0 13:58:52 point_skyscan result=0 13:58:52 Check angles 13:58:52 SkyScan query 13:58:53 SkyScan query done: ret=0 az=108.975<-7265 ze=-81.27<-17418 Statuses=0009 0009 13:58:53 Msec=0 True Az=108.975 Ze=-81.27 Az status=0009 Ze status=0009 13:58:53 Check angles 13:58:53 SkyScan query 13:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.225<-18815 Statuses=0008 0009 13:58:54 Msec=750 True Az=112.995 Ze=-102.225 Az status=0008 Ze status=0009 13:58:54 Check angles 13:58:54 SkyScan query 13:58:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.165<-20211 Statuses=0008 0009 13:58:54 Msec=1500 True Az=112.995 Ze=-123.165 Az status=0008 Ze status=0009 13:58:55 Check angles 13:58:55 SkyScan query 13:58:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.12<-21608 Statuses=0008 0009 13:58:55 Msec=2250 True Az=112.995 Ze=-144.12 Az status=0008 Ze status=0009 13:58:55 Check angles 13:58:55 SkyScan query 13:58:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.075<-23005 Statuses=0008 0009 13:58:56 Msec=3000 True Az=112.995 Ze=-165.075 Az status=0008 Ze status=0009 13:58:56 Check angles 13:58:56 SkyScan query 13:58:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 13:58:57 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 13:58:57 Message to Master queued w/err=0: serial=11788 error=0 13:59:02 Received message from Master: op=Filter serial=11789 13:59:02 Color wheel filter change from 0 to 0 13:59:02 FLIGetFilterPos err=0 currentPosition=0 13:59:02 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:02 Filter is already there-color wheel unchanged 13:59:02 Received message from Master: op=Shutter serial=11790 13:59:02 Shutter LASER open 13:59:02 Received message from Camera: op=State serial=11792 13:59:02 GetSingleValue result=40 Value=cccccccc 13:59:02 SkyScan query 13:59:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 13:59:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:03 Parameters OK 13:59:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:03 Set A/D data flow result=40 13:59:03 Set A/D channel type result=40 13:59:03 Set A/D encoding result=40 13:59:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:03 Set channel filter=0.000000e+000 result=40 13:59:03 Config A/D Result=40 13:59:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:03 Get A/D filter: -9.255963e+061 result=40 13:59:03 Get A/D value=-858993460 result=40 13:59:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:03 Parameters OK 13:59:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:03 Set A/D data flow result=40 13:59:03 Set A/D channel type result=40 13:59:03 Set A/D encoding result=40 13:59:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:03 Set channel filter=0.000000e+000 result=40 13:59:03 Config A/D Result=40 13:59:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:03 Get A/D filter: -9.255963e+061 result=40 13:59:03 Get A/D value=-858993460 result=40 13:59:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:03 Aux= 13:59:03 Message to Camera, serial 11792 queued 13:59:05 Received message from Master: op=Shutter serial=11796 13:59:05 Shutter LASER close 13:59:05 Received message from Master: op=PointingHead serial=11800 13:59:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 13:59:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 13:59:06 Point started: ret=0 13:59:06 point_skyscan result=0 13:59:07 Check angles 13:59:07 SkyScan query 13:59:07 SkyScan query done: ret=0 az=89.46<-5964 ze=156.765<-1549 Statuses=0009 0009 13:59:07 Msec=0 True Az=89.46 Ze=156.765 Az status=0009 Ze status=0009 13:59:07 Check angles 13:59:07 SkyScan query 13:59:08 SkyScan query done: ret=0 az=71.955<-4797 ze=135.78<-2948 Statuses=0009 0009 13:59:08 Msec=750 True Az=71.955 Ze=135.78 Az status=0009 Ze status=0009 13:59:08 Check angles 13:59:08 SkyScan query 13:59:09 SkyScan query done: ret=0 az=54.705<-3647 ze=114.84<-4344 Statuses=0009 0009 13:59:09 Msec=1500 True Az=54.705 Ze=114.84 Az status=0009 Ze status=0009 13:59:09 Check angles 13:59:09 SkyScan query 13:59:09 SkyScan query done: ret=0 az=40.89<-2726 ze=93.87<-5742 Statuses=0009 0009 13:59:09 Msec=2250 True Az=40.89 Ze=93.87 Az status=0009 Ze status=0009 13:59:10 Check angles 13:59:10 SkyScan query 13:59:10 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 13:59:10 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 13:59:10 Check angles 13:59:10 SkyScan query 13:59:11 SkyScan query done: ret=0 az=40.995<-2733 ze=52.515<-8499 Statuses=0008 0009 13:59:11 Msec=3750 True Az=40.995 Ze=52.515 Az status=0008 Ze status=0009 13:59:11 Check angles 13:59:11 SkyScan query 13:59:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 13:59:12 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 13:59:12 Message to Master queued w/err=0: serial=11800 error=0 13:59:17 Received message from Master: op=Filter serial=11801 13:59:17 Color wheel filter change from 0 to 0 13:59:17 FLIGetFilterPos err=0 currentPosition=0 13:59:17 FLIGetStepsRemaining err=0 RemainingSteps=0 13:59:17 Filter is already there-color wheel unchanged 13:59:17 Received message from Master: op=Shutter serial=11802 13:59:17 Shutter LASER close 13:59:17 Received message from Camera: op=State serial=11804 13:59:17 GetSingleValue result=40 Value=cccccccc 13:59:17 SkyScan query 13:59:18 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 13:59:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:18 Parameters OK 13:59:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:18 Set A/D data flow result=40 13:59:18 Set A/D channel type result=40 13:59:18 Set A/D encoding result=40 13:59:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:18 Set channel filter=0.000000e+000 result=40 13:59:18 Config A/D Result=40 13:59:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:18 Get A/D filter: -9.255963e+061 result=40 13:59:18 Get A/D value=-858993460 result=40 13:59:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 13:59:18 Parameters OK 13:59:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 13:59:18 Set A/D data flow result=40 13:59:18 Set A/D channel type result=40 13:59:18 Set A/D encoding result=40 13:59:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 13:59:18 Set channel filter=0.000000e+000 result=40 13:59:18 Config A/D Result=40 13:59:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 13:59:18 Get A/D filter: -9.255963e+061 result=40 13:59:18 Get A/D value=-858993460 result=40 13:59:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 13:59:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 13:59:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 13:59:18 Aux= 13:59:18 Message to Camera, serial 11804 queued 13:59:48 Received message from Master: op=PointingHead serial=11811 13:59:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 13:59:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 13:59:49 Point started: ret=0 13:59:49 point_skyscan result=0 13:59:50 Check angles 13:59:50 SkyScan query 13:59:50 SkyScan query done: ret=0 az=64.38<-4292 ze=66.57<-7562 Statuses=0009 0008 13:59:50 Msec=0 True Az=64.38 Ze=66.57 Az status=0009 Ze status=0008 13:59:50 Check angles 13:59:50 SkyScan query 13:59:51 SkyScan query done: ret=0 az=81.855<-5457 ze=66.51<-7566 Statuses=0009 0008 13:59:51 Msec=750 True Az=81.855 Ze=66.51 Az status=0009 Ze status=0008 13:59:51 Check angles 13:59:51 SkyScan query 13:59:52 SkyScan query done: ret=0 az=99.585<-6639 ze=66.51<-7566 Statuses=0009 0008 13:59:52 Msec=1500 True Az=99.585 Ze=66.51 Az status=0009 Ze status=0008 13:59:52 Check angles 13:59:52 SkyScan query 13:59:52 SkyScan query done: ret=0 az=117<-7800 ze=66.51<-7566 Statuses=0009 0008 13:59:52 Msec=2250 True Az=117 Ze=66.51 Az status=0009 Ze status=0008 13:59:53 Check angles 13:59:53 SkyScan query 13:59:53 SkyScan query done: ret=0 az=134.37<-8958 ze=66.51<-7566 Statuses=0009 0008 13:59:53 Msec=3000 True Az=134.37 Ze=66.51 Az status=0009 Ze status=0008 13:59:53 Check angles 13:59:53 SkyScan query 13:59:54 SkyScan query done: ret=0 az=151.71<-10114 ze=66.51<-7566 Statuses=0009 0008 13:59:54 Msec=3750 True Az=151.71 Ze=66.51 Az status=0009 Ze status=0008 13:59:54 Check angles 13:59:54 SkyScan query 13:59:55 SkyScan query done: ret=0 az=158.025<-10535 ze=66.51<-7566 Statuses=0008 0008 13:59:55 Msec=4500 True Az=158.025 Ze=66.51 Az status=0008 Ze status=0008 13:59:55 Message to Master queued w/err=0: serial=11811 error=0 14:00:00 Received message from Master: op=Filter serial=11812 14:00:00 Color wheel filter change from 0 to 0 14:00:00 FLIGetFilterPos err=0 currentPosition=0 14:00:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:00 Filter is already there-color wheel unchanged 14:00:00 Received message from Master: op=Shutter serial=11813 14:00:00 Shutter LASER close 14:00:00 Received message from Camera: op=State serial=11815 14:00:00 GetSingleValue result=40 Value=cccccccc 14:00:00 SkyScan query 14:00:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.51<-7566 Statuses=0008 0008 14:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:00 Parameters OK 14:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:00 Set A/D data flow result=40 14:00:00 Set A/D channel type result=40 14:00:00 Set A/D encoding result=40 14:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:00 Set channel filter=0.000000e+000 result=40 14:00:00 Config A/D Result=40 14:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:00 Get A/D filter: -9.255963e+061 result=40 14:00:00 Get A/D value=-858993460 result=40 14:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:00 Parameters OK 14:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:00 Set A/D data flow result=40 14:00:00 Set A/D channel type result=40 14:00:00 Set A/D encoding result=40 14:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:00 Set channel filter=0.000000e+000 result=40 14:00:00 Config A/D Result=40 14:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:00 Get A/D filter: -9.255963e+061 result=40 14:00:00 Get A/D value=-858993460 result=40 14:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.510002 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:00 Aux= 14:00:00 Message to Camera, serial 11815 queued 14:00:31 Received message from Master: op=PointingHead serial=11822 14:00:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:00:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:00:32 Point started: ret=0 14:00:32 point_skyscan result=0 14:00:32 Check angles 14:00:32 SkyScan query 14:00:33 SkyScan query done: ret=0 az=135.255<-9017 ze=36.96<-9536 Statuses=0009 0009 14:00:33 Msec=0 True Az=135.255 Ze=36.96 Az status=0009 Ze status=0009 14:00:33 Check angles 14:00:33 SkyScan query 14:00:34 SkyScan query done: ret=0 az=117.255<-7817 ze=15.585<-10961 Statuses=0009 0009 14:00:34 Msec=750 True Az=117.255 Ze=15.585 Az status=0009 Ze status=0009 14:00:34 Check angles 14:00:34 SkyScan query 14:00:34 SkyScan query done: ret=0 az=100.02<-6668 ze=-5.4<-12360 Statuses=0009 0009 14:00:34 Msec=1500 True Az=100.02 Ze=-5.4 Az status=0009 Ze status=0009 14:00:35 Check angles 14:00:35 SkyScan query 14:00:35 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.355<-13757 Statuses=0009 0009 [UTC 2018-12-4 14:00:35] 14:00:35 Msec=2250 True Az=82.44 Ze=-26.355 Az status=0009 Ze status=0009 14:00:35 Check angles 14:00:35 SkyScan query 14:00:36 SkyScan query done: ret=0 az=64.665<-4311 ze=-38.565<-14571 Statuses=0009 0008 14:00:36 Msec=3000 True Az=64.665 Ze=-38.565 Az status=0009 Ze status=0008 14:00:36 Check angles 14:00:36 SkyScan query 14:00:37 SkyScan query done: ret=0 az=46.755<-3117 ze=-38.535<-14569 Statuses=0009 0008 14:00:37 Msec=3750 True Az=46.755 Ze=-38.535 Az status=0009 Ze status=0008 14:00:37 Check angles 14:00:37 SkyScan query 14:00:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:00:38 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:00:38 Message to Master queued w/err=0: serial=11822 error=0 14:00:43 Received message from Master: op=Filter serial=11823 14:00:43 Color wheel filter change from 0 to 0 14:00:43 FLIGetFilterPos err=0 currentPosition=0 14:00:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:00:43 Filter is already there-color wheel unchanged 14:00:43 Received message from Master: op=Shutter serial=11824 14:00:43 Shutter LASER close 14:00:43 Received message from Camera: op=State serial=11826 14:00:43 GetSingleValue result=40 Value=cccccccc 14:00:43 SkyScan query 14:00:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:00:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:43 Parameters OK 14:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:43 Set A/D data flow result=40 14:00:43 Set A/D channel type result=40 14:00:43 Set A/D encoding result=40 14:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:43 Set channel filter=0.000000e+000 result=40 14:00:43 Config A/D Result=40 14:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:43 Get A/D filter: -9.255963e+061 result=40 14:00:43 Get A/D value=-858993460 result=40 14:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:00:43 Parameters OK 14:00:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:00:43 Set A/D data flow result=40 14:00:43 Set A/D channel type result=40 14:00:43 Set A/D encoding result=40 14:00:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:00:43 Set channel filter=0.000000e+000 result=40 14:00:43 Config A/D Result=40 14:00:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:00:43 Get A/D filter: -9.255963e+061 result=40 14:00:43 Get A/D value=-858993460 result=40 14:00:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:00:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:00:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:00:43 Aux= 14:00:43 Message to Camera, serial 11826 queued 14:01:14 Received message from Master: op=PointingHead serial=11833 14:01:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:01:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:01:14 Point started: ret=0 14:01:14 point_skyscan result=0 14:01:15 Check angles 14:01:15 SkyScan query 14:01:16 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.28<-16552 Statuses=0009 0009 14:01:16 Msec=0 True Az=63.87 Ze=-68.28 Az status=0009 Ze status=0009 14:01:16 Check angles 14:01:16 SkyScan query 14:01:17 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.22<-17948 Statuses=0009 0009 14:01:17 Msec=750 True Az=81.345 Ze=-89.22 Az status=0009 Ze status=0009 14:01:17 Check angles 14:01:17 SkyScan query 14:01:17 SkyScan query done: ret=0 az=99.36<-6624 ze=-110.67<-19378 Statuses=0009 0009 14:01:17 Msec=1500 True Az=99.36 Ze=-110.67 Az status=0009 Ze status=0009 14:01:18 Check angles 14:01:18 SkyScan query 14:01:18 SkyScan query done: ret=0 az=117.165<-7811 ze=-131.985<-20799 Statuses=0009 0009 14:01:18 Msec=2250 True Az=117.165 Ze=-131.985 Az status=0009 Ze status=0009 14:01:18 Check angles 14:01:18 SkyScan query 14:01:19 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 14:01:19 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 14:01:19 Check angles 14:01:19 SkyScan query 14:01:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:01:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:01:20 Message to Master queued w/err=0: serial=11833 error=0 14:01:25 Received message from Master: op=Filter serial=11834 14:01:25 Color wheel filter change from 0 to 0 14:01:25 FLIGetFilterPos err=0 currentPosition=0 14:01:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:01:25 Filter is already there-color wheel unchanged 14:01:25 Received message from Master: op=Shutter serial=11835 14:01:25 Shutter LASER close 14:01:25 Received message from Camera: op=State serial=11837 14:01:25 GetSingleValue result=40 Value=cccccccc 14:01:25 SkyScan query 14:01:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:01:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:25 Parameters OK 14:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:25 Set A/D data flow result=40 14:01:25 Set A/D channel type result=40 14:01:25 Set A/D encoding result=40 14:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:25 Set channel filter=0.000000e+000 result=40 14:01:25 Config A/D Result=40 14:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:25 Get A/D filter: -9.255963e+061 result=40 14:01:25 Get A/D value=-858993460 result=40 14:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:01:25 Parameters OK 14:01:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:01:25 Set A/D data flow result=40 14:01:25 Set A/D channel type result=40 14:01:25 Set A/D encoding result=40 14:01:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:01:25 Set channel filter=0.000000e+000 result=40 14:01:25 Config A/D Result=40 14:01:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:01:25 Get A/D filter: -9.255963e+061 result=40 14:01:25 Get A/D value=-858993460 result=40 14:01:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:01:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:01:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:01:25 Aux= 14:01:25 Message to Camera, serial 11837 queued 14:01:56 Received message from Master: op=PointingHead serial=11844 14:01:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:01:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:01:57 Point started: ret=0 14:01:57 point_skyscan result=0 14:01:57 Check angles 14:01:57 SkyScan query 14:01:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.42<-23428 Statuses=0009 0009 14:01:58 Msec=0 True Az=113.01 Ze=-171.42 Az status=0009 Ze status=0009 14:01:58 Check angles 14:01:58 SkyScan query 14:01:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:01:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:01:59 Message to Master queued w/err=0: serial=11844 error=0 14:02:04 Received message from Master: op=Filter serial=11845 14:02:04 Color wheel filter change from 0 to 0 14:02:04 FLIGetFilterPos err=0 currentPosition=0 14:02:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:04 Filter is already there-color wheel unchanged 14:02:04 Received message from Master: op=Shutter serial=11846 14:02:04 Shutter LASER open 14:02:04 Received message from Camera: op=State serial=11848 14:02:04 GetSingleValue result=40 Value=cccccccc 14:02:04 SkyScan query 14:02:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:02:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:05 Parameters OK 14:02:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:05 Set A/D data flow result=40 14:02:05 Set A/D channel type result=40 14:02:05 Set A/D encoding result=40 14:02:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:05 Set channel filter=0.000000e+000 result=40 14:02:05 Config A/D Result=40 14:02:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:05 Get A/D filter: -9.255963e+061 result=40 14:02:05 Get A/D value=-858993460 result=40 14:02:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:05 Parameters OK 14:02:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:05 Set A/D data flow result=40 14:02:05 Set A/D channel type result=40 14:02:05 Set A/D encoding result=40 14:02:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:05 Set channel filter=0.000000e+000 result=40 14:02:05 Config A/D Result=40 14:02:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:05 Get A/D filter: -9.255963e+061 result=40 14:02:05 Get A/D value=-858993460 result=40 14:02:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:05 Aux= 14:02:05 Message to Camera, serial 11848 queued 14:02:07 Received message from Master: op=Shutter serial=11852 14:02:07 Shutter LASER close 14:02:08 Received message from Master: op=PointingHead serial=11856 14:02:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:02:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:02:08 Point started: ret=0 14:02:08 point_skyscan result=0 14:02:09 Check angles 14:02:09 SkyScan query 14:02:09 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.34<-21556 Statuses=0009 0009 14:02:09 Msec=0 True Az=135.84 Ze=-143.34 Az status=0009 Ze status=0009 14:02:10 Check angles 14:02:10 SkyScan query 14:02:10 SkyScan query done: ret=0 az=153.765<-10251 ze=-121.935<-20129 Statuses=0009 0009 14:02:10 Msec=750 True Az=153.765 Ze=-121.935 Az status=0009 Ze status=0009 14:02:10 Check angles 14:02:10 SkyScan query 14:02:11 SkyScan query done: ret=0 az=171.6<-11440 ze=-100.575<-18705 Statuses=0009 0009 14:02:11 Msec=1500 True Az=171.6 Ze=-100.575 Az status=0009 Ze status=0009 14:02:11 Check angles 14:02:11 SkyScan query 14:02:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.605<-17307 Statuses=0008 0009 14:02:12 Msec=2250 True Az=176.025 Ze=-79.605 Az status=0008 Ze status=0009 14:02:12 Check angles 14:02:12 SkyScan query 14:02:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 14:02:12 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 14:02:13 Check angles 14:02:13 SkyScan query 14:02:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:02:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:02:13 Message to Master queued w/err=0: serial=11856 error=0 14:02:18 Received message from Master: op=Filter serial=11857 14:02:18 Color wheel filter change from 0 to 0 14:02:18 FLIGetFilterPos err=0 currentPosition=0 14:02:18 FLIGetStepsRemaining err=0 RemainingSteps=0 14:02:18 Filter is already there-color wheel unchanged 14:02:18 Received message from Master: op=Shutter serial=11858 14:02:18 Shutter LASER close 14:02:18 Received message from Camera: op=State serial=11860 14:02:18 GetSingleValue result=40 Value=cccccccc 14:02:18 SkyScan query 14:02:19 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:02:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:19 Parameters OK 14:02:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:19 Set A/D data flow result=40 14:02:19 Set A/D channel type result=40 14:02:19 Set A/D encoding result=40 14:02:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:19 Set channel filter=0.000000e+000 result=40 14:02:19 Config A/D Result=40 14:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:19 Get A/D filter: -9.255963e+061 result=40 14:02:19 Get A/D value=-858993460 result=40 14:02:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:02:19 Parameters OK 14:02:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:02:19 Set A/D data flow result=40 14:02:19 Set A/D channel type result=40 14:02:19 Set A/D encoding result=40 14:02:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:02:19 Set channel filter=0.000000e+000 result=40 14:02:19 Config A/D Result=40 14:02:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:02:19 Get A/D filter: -9.255963e+061 result=40 14:02:19 Get A/D value=-858993460 result=40 14:02:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:02:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:02:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:02:19 Aux= 14:02:19 Message to Camera, serial 11860 queued 14:02:50 Received message from Master: op=PointingHead serial=11867 14:02:50 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:02:50 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:02:50 Point started: ret=0 14:02:50 point_skyscan result=0 14:02:51 Check angles 14:02:51 SkyScan query 14:02:52 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.54<-13436 Statuses=0009 0009 14:02:52 Msec=0 True Az=152.925 Ze=-21.54 Az status=0009 Ze status=0009 14:02:52 Check angles 14:02:52 SkyScan query 14:02:52 SkyScan query done: ret=0 az=135.63<-9042 ze=-0.93<-12062 Statuses=0009 0009 14:02:52 Msec=750 True Az=135.63 Ze=-0.93 Az status=0009 Ze status=0009 14:02:53 Check angles 14:02:53 SkyScan query 14:02:53 SkyScan query done: ret=0 az=118.155<-7877 ze=19.95<-10670 Statuses=0009 0009 14:02:53 Msec=1500 True Az=118.155 Ze=19.95 Az status=0009 Ze status=0009 14:02:53 Check angles 14:02:53 SkyScan query 14:02:54 SkyScan query done: ret=0 az=100.74<-6716 ze=40.92<-9272 Statuses=0009 0009 14:02:54 Msec=2250 True Az=100.74 Ze=40.92 Az status=0009 Ze status=0009 14:02:54 Check angles 14:02:54 SkyScan query 14:02:55 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:02:55 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:02:55 Check angles 14:02:55 SkyScan query 14:02:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:02:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:02:55 Message to Master queued w/err=0: serial=11867 error=0 14:03:00 Received message from Master: op=Filter serial=11868 14:03:00 Color wheel filter change from 0 to 0 14:03:00 FLIGetFilterPos err=0 currentPosition=0 14:03:00 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:00 Filter is already there-color wheel unchanged 14:03:01 Received message from Master: op=Shutter serial=11869 14:03:01 Shutter LASER close 14:03:01 Received message from Camera: op=State serial=11871 14:03:01 GetSingleValue result=40 Value=cccccccc 14:03:01 SkyScan query 14:03:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:03:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:01 Parameters OK 14:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:01 Set A/D data flow result=40 14:03:01 Set A/D channel type result=40 14:03:01 Set A/D encoding result=40 14:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:01 Set channel filter=0.000000e+000 result=40 14:03:01 Config A/D Result=40 14:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:01 Get A/D filter: -9.255963e+061 result=40 14:03:01 Get A/D value=-858993460 result=40 14:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:01 Parameters OK 14:03:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:01 Set A/D data flow result=40 14:03:01 Set A/D channel type result=40 14:03:01 Set A/D encoding result=40 14:03:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:01 Set channel filter=0.000000e+000 result=40 14:03:01 Config A/D Result=40 14:03:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:01 Get A/D filter: -9.255963e+061 result=40 14:03:01 Get A/D value=-858993460 result=40 14:03:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:01 Aux= 14:03:01 Message to Camera, serial 11871 queued 14:03:32 Received message from Master: op=PointingHead serial=11878 14:03:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:03:32 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:03:32 Point started: ret=0 14:03:32 point_skyscan result=0 14:03:33 Check angles 14:03:33 SkyScan query 14:03:34 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 14:03:34 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 14:03:34 Check angles 14:03:34 SkyScan query 14:03:34 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 14:03:34 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 14:03:35 Check angles 14:03:35 SkyScan query 14:03:35 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 14:03:35 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 14:03:35 Check angles 14:03:35 SkyScan query 14:03:36 SkyScan query done: ret=0 az=161.46<-10764 ze=38.505<-9433 Statuses=0009 0008 14:03:36 Msec=2250 True Az=161.46 Ze=38.505 Az status=0009 Ze status=0008 14:03:36 Check angles 14:03:36 SkyScan query 14:03:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:03:37 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:03:37 Check angles 14:03:37 SkyScan query 14:03:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:03:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:03:37 Message to Master queued w/err=0: serial=11878 error=0 14:03:42 Received message from Master: op=Filter serial=11879 14:03:42 Color wheel filter change from 0 to 0 14:03:42 FLIGetFilterPos err=0 currentPosition=0 14:03:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:03:42 Filter is already there-color wheel unchanged 14:03:43 Received message from Master: op=Shutter serial=11880 14:03:43 Shutter LASER close 14:03:43 Received message from Camera: op=State serial=11882 14:03:43 GetSingleValue result=40 Value=cccccccc 14:03:43 SkyScan query 14:03:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:03:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:43 Parameters OK 14:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:43 Set A/D data flow result=40 14:03:43 Set A/D channel type result=40 14:03:43 Set A/D encoding result=40 14:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:43 Set channel filter=0.000000e+000 result=40 14:03:43 Config A/D Result=40 14:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:43 Get A/D filter: -9.255963e+061 result=40 14:03:43 Get A/D value=-858993460 result=40 14:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:03:43 Parameters OK 14:03:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:03:43 Set A/D data flow result=40 14:03:43 Set A/D channel type result=40 14:03:43 Set A/D encoding result=40 14:03:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:03:43 Set channel filter=0.000000e+000 result=40 14:03:43 Config A/D Result=40 14:03:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:03:43 Get A/D filter: -9.255963e+061 result=40 14:03:43 Get A/D value=-858993460 result=40 14:03:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:03:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:03:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:03:43 Aux= 14:03:43 Message to Camera, serial 11882 queued 14:04:14 Received message from Master: op=PointingHead serial=11889 14:04:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:04:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:04:14 Point started: ret=0 14:04:14 point_skyscan result=0 14:04:15 Check angles 14:04:15 SkyScan query 14:04:16 SkyScan query done: ret=0 az=152.94<-10196 ze=8.58<-11428 Statuses=0009 0009 14:04:16 Msec=0 True Az=152.94 Ze=8.58 Az status=0009 Ze status=0009 14:04:16 Check angles 14:04:16 SkyScan query 14:04:17 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.36<-12824 Statuses=0009 0009 14:04:17 Msec=750 True Az=135.465 Ze=-12.36 Az status=0009 Ze status=0009 14:04:17 Check angles 14:04:17 SkyScan query 14:04:17 SkyScan query done: ret=0 az=117.585<-7839 ze=-33.735<-14249 Statuses=0009 0009 14:04:17 Msec=1500 True Az=117.585 Ze=-33.735 Az status=0009 Ze status=0009 14:04:17 Check angles 14:04:17 SkyScan query 14:04:18 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.555<-15437 Statuses=0009 0009 14:04:18 Msec=2250 True Az=100.17 Ze=-51.555 Az status=0009 Ze status=0009 14:04:18 Check angles 14:04:18 SkyScan query 14:04:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:04:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:04:19 Check angles 14:04:19 SkyScan query 14:04:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 14:04:20 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 14:04:20 Message to Master queued w/err=0: serial=11889 error=0 14:04:25 Received message from Master: op=Filter serial=11890 14:04:25 Color wheel filter change from 0 to 0 14:04:25 FLIGetFilterPos err=0 currentPosition=0 14:04:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:04:25 Filter is already there-color wheel unchanged 14:04:25 Received message from Master: op=Shutter serial=11891 14:04:25 Shutter LASER close 14:04:25 Received message from Camera: op=State serial=11893 14:04:25 GetSingleValue result=40 Value=cccccccc 14:04:25 SkyScan query 14:04:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:04:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:25 Parameters OK 14:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:25 Set A/D data flow result=40 14:04:25 Set A/D channel type result=40 14:04:25 Set A/D encoding result=40 14:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:25 Set channel filter=0.000000e+000 result=40 14:04:25 Config A/D Result=40 14:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:25 Get A/D filter: -9.255963e+061 result=40 14:04:25 Get A/D value=-858993460 result=40 14:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:04:25 Parameters OK 14:04:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:04:25 Set A/D data flow result=40 14:04:25 Set A/D channel type result=40 14:04:25 Set A/D encoding result=40 14:04:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:04:25 Set channel filter=0.000000e+000 result=40 14:04:25 Config A/D Result=40 14:04:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:04:25 Get A/D filter: -9.255963e+061 result=40 14:04:25 Get A/D value=-858993460 result=40 14:04:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:04:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:04:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:04:25 Aux= 14:04:25 Message to Camera, serial 11893 queued 14:04:56 Received message from Master: op=PointingHead serial=11900 14:04:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:04:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:04:57 Point started: ret=0 14:04:57 point_skyscan result=0 14:04:57 Check angles 14:04:57 SkyScan query 14:04:58 SkyScan query done: ret=0 az=109.275<-7285 ze=-81.57<-17438 Statuses=0009 0009 14:04:58 Msec=0 True Az=109.275 Ze=-81.57 Az status=0009 Ze status=0009 14:04:58 Check angles 14:04:58 SkyScan query 14:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 14:04:59 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 14:04:59 Check angles 14:04:59 SkyScan query 14:04:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 14:04:59 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 14:05:00 Check angles 14:05:00 SkyScan query 14:05:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.855<-21657 Statuses=0008 0009 14:05:00 Msec=2250 True Az=112.995 Ze=-144.855 Az status=0008 Ze status=0009 14:05:00 Check angles 14:05:00 SkyScan query 14:05:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.795<-23053 Statuses=0008 0009 14:05:01 Msec=3000 True Az=112.995 Ze=-165.795 Az status=0008 Ze status=0009 14:05:01 Check angles 14:05:01 SkyScan query 14:05:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:05:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:05:02 Message to Master queued w/err=0: serial=11900 error=0 14:05:07 Received message from Master: op=Filter serial=11901 14:05:07 Color wheel filter change from 0 to 0 14:05:07 FLIGetFilterPos err=0 currentPosition=0 14:05:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:07 Filter is already there-color wheel unchanged 14:05:07 Received message from Master: op=Shutter serial=11902 14:05:07 Shutter LASER open 14:05:07 Received message from Camera: op=State serial=11904 14:05:07 GetSingleValue result=40 Value=cccccccc 14:05:07 SkyScan query 14:05:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:05:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:08 Parameters OK 14:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:08 Set A/D data flow result=40 14:05:08 Set A/D channel type result=40 14:05:08 Set A/D encoding result=40 14:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:08 Set channel filter=0.000000e+000 result=40 14:05:08 Config A/D Result=40 14:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:08 Get A/D filter: -9.255963e+061 result=40 14:05:08 Get A/D value=-858993460 result=40 14:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:08 Parameters OK 14:05:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:08 Set A/D data flow result=40 14:05:08 Set A/D channel type result=40 14:05:08 Set A/D encoding result=40 14:05:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:08 Set channel filter=0.000000e+000 result=40 14:05:08 Config A/D Result=40 14:05:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:08 Get A/D filter: -9.255963e+061 result=40 14:05:08 Get A/D value=-858993460 result=40 14:05:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:08 Aux= 14:05:08 Message to Camera, serial 11904 queued 14:05:10 Received message from Master: op=Shutter serial=11908 14:05:10 Shutter LASER close 14:05:10 Received message from Master: op=PointingHead serial=11912 14:05:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:05:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:05:11 Point started: ret=0 14:05:11 point_skyscan result=0 14:05:12 Check angles 14:05:12 SkyScan query 14:05:12 SkyScan query done: ret=0 az=89.67<-5978 ze=157.005<-1533 Statuses=0009 0009 14:05:12 Msec=0 True Az=89.67 Ze=157.005 Az status=0009 Ze status=0009 14:05:12 Check angles 14:05:12 SkyScan query 14:05:13 SkyScan query done: ret=0 az=72.24<-4816 ze=136.02<-2932 Statuses=0009 0009 14:05:13 Msec=750 True Az=72.24 Ze=136.02 Az status=0009 Ze status=0009 14:05:13 Check angles 14:05:13 SkyScan query 14:05:14 SkyScan query done: ret=0 az=54.855<-3657 ze=115.08<-4328 Statuses=0009 0009 14:05:14 Msec=1500 True Az=54.855 Ze=115.08 Az status=0009 Ze status=0009 14:05:14 Check angles 14:05:14 SkyScan query 14:05:14 SkyScan query done: ret=0 az=40.845<-2723 ze=94.095<-5727 Statuses=0009 0009 14:05:14 Msec=2250 True Az=40.845 Ze=94.095 Az status=0009 Ze status=0009 14:05:15 Check angles 14:05:15 SkyScan query 14:05:15 SkyScan query done: ret=0 az=41.01<-2734 ze=73.155<-7123 Statuses=0008 0009 14:05:15 Msec=3000 True Az=41.01 Ze=73.155 Az status=0008 Ze status=0009 14:05:15 Check angles 14:05:15 SkyScan query 14:05:16 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 14:05:16 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 14:05:16 Check angles 14:05:16 SkyScan query 14:05:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:05:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:05:17 Message to Master queued w/err=0: serial=11912 error=0 14:05:22 Received message from Master: op=Filter serial=11913 14:05:22 Color wheel filter change from 0 to 0 14:05:22 FLIGetFilterPos err=0 currentPosition=0 14:05:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:05:22 Filter is already there-color wheel unchanged 14:05:22 Received message from Master: op=Shutter serial=11914 14:05:22 Shutter LASER close 14:05:22 Received message from Camera: op=State serial=11916 14:05:22 GetSingleValue result=40 Value=cccccccc 14:05:22 SkyScan query 14:05:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:05:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:23 Parameters OK 14:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:23 Set A/D data flow result=40 14:05:23 Set A/D channel type result=40 14:05:23 Set A/D encoding result=40 14:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:23 Set channel filter=0.000000e+000 result=40 14:05:23 Config A/D Result=40 14:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:23 Get A/D filter: -9.255963e+061 result=40 14:05:23 Get A/D value=-858993460 result=40 14:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:05:23 Parameters OK 14:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:05:23 Set A/D data flow result=40 14:05:23 Set A/D channel type result=40 14:05:23 Set A/D encoding result=40 14:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:05:23 Set channel filter=0.000000e+000 result=40 14:05:23 Config A/D Result=40 14:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:05:23 Get A/D filter: -9.255963e+061 result=40 14:05:23 Get A/D value=-858993460 result=40 14:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:05:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:05:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:05:23 Aux= 14:05:23 Message to Camera, serial 11916 queued 14:05:53 Received message from Master: op=PointingHead serial=11923 14:05:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:05:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:05:54 Point started: ret=0 14:05:54 point_skyscan result=0 14:05:55 Check angles 14:05:55 SkyScan query 14:05:55 SkyScan query done: ret=0 az=63.96<-4264 ze=66.555<-7563 Statuses=0009 0008 14:05:55 Msec=0 True Az=63.96 Ze=66.555 Az status=0009 Ze status=0008 14:05:55 Check angles 14:05:55 SkyScan query 14:05:56 SkyScan query done: ret=0 az=81.9<-5460 ze=66.495<-7567 Statuses=0009 0008 14:05:56 Msec=750 True Az=81.9 Ze=66.495 Az status=0009 Ze status=0008 14:05:56 Check angles 14:05:56 SkyScan query 14:05:57 SkyScan query done: ret=0 az=99.615<-6641 ze=66.495<-7567 Statuses=0009 0008 14:05:57 Msec=1500 True Az=99.615 Ze=66.495 Az status=0009 Ze status=0008 14:05:57 Check angles 14:05:57 SkyScan query 14:05:57 SkyScan query done: ret=0 az=116.955<-7797 ze=66.495<-7567 Statuses=0009 0008 14:05:57 Msec=2250 True Az=116.955 Ze=66.495 Az status=0009 Ze status=0008 14:05:58 Check angles 14:05:58 SkyScan query 14:05:58 SkyScan query done: ret=0 az=134.73<-8982 ze=66.495<-7567 Statuses=0009 0008 14:05:58 Msec=3000 True Az=134.73 Ze=66.495 Az status=0009 Ze status=0008 14:05:58 Check angles 14:05:58 SkyScan query 14:05:59 SkyScan query done: ret=0 az=152.085<-10139 ze=66.495<-7567 Statuses=0009 0008 14:05:59 Msec=3750 True Az=152.085 Ze=66.495 Az status=0009 Ze status=0008 14:05:59 Check angles 14:05:59 SkyScan query 14:06:00 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:06:00 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:06:00 Message to Master queued w/err=0: serial=11923 error=0 14:06:05 Received message from Master: op=Filter serial=11924 14:06:05 Color wheel filter change from 0 to 0 14:06:05 FLIGetFilterPos err=0 currentPosition=0 14:06:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:05 Filter is already there-color wheel unchanged 14:06:05 Received message from Master: op=Shutter serial=11925 14:06:05 Shutter LASER close 14:06:05 Received message from Camera: op=State serial=11927 14:06:05 GetSingleValue result=40 Value=cccccccc 14:06:05 SkyScan query 14:06:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:05 Parameters OK 14:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:05 Set A/D data flow result=40 14:06:05 Set A/D channel type result=40 14:06:05 Set A/D encoding result=40 14:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:05 Set channel filter=0.000000e+000 result=40 14:06:05 Config A/D Result=40 14:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:05 Get A/D filter: -9.255963e+061 result=40 14:06:05 Get A/D value=-858993460 result=40 14:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:05 Parameters OK 14:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:05 Set A/D data flow result=40 14:06:05 Set A/D channel type result=40 14:06:05 Set A/D encoding result=40 14:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:05 Set channel filter=0.000000e+000 result=40 14:06:05 Config A/D Result=40 14:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:05 Get A/D filter: -9.255963e+061 result=40 14:06:05 Get A/D value=-858993460 result=40 14:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:05 Aux= 14:06:05 Message to Camera, serial 11927 queued 14:06:36 Received message from Master: op=PointingHead serial=11934 14:06:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:06:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:06:37 Point started: ret=0 14:06:37 point_skyscan result=0 14:06:37 Check angles 14:06:37 SkyScan query 14:06:38 SkyScan query done: ret=0 az=134.58<-8972 ze=36.225<-9585 Statuses=0009 0009 14:06:38 Msec=0 True Az=134.58 Ze=36.225 Az status=0009 Ze status=0009 14:06:38 Check angles 14:06:38 SkyScan query 14:06:39 SkyScan query done: ret=0 az=116.655<-7777 ze=14.865<-11009 Statuses=0009 0009 14:06:39 Msec=750 True Az=116.655 Ze=14.865 Az status=0009 Ze status=0009 14:06:39 Check angles 14:06:39 SkyScan query 14:06:39 SkyScan query done: ret=0 az=99.3<-6620 ze=-6.09<-12406 Statuses=0009 0009 14:06:39 Msec=1500 True Az=99.3 Ze=-6.09 Az status=0009 Ze status=0009 14:06:40 Check angles 14:06:40 SkyScan query 14:06:40 SkyScan query done: ret=0 az=81.57<-5438 ze=-27.465<-13831 Statuses=0009 0009 14:06:40 Msec=2250 True Az=81.57 Ze=-27.465 Az status=0009 Ze status=0009 14:06:40 Check angles 14:06:40 SkyScan query 14:06:41 SkyScan query done: ret=0 az=63.645<-4243 ze=-38.55<-14570 Statuses=0009 0008 14:06:41 Msec=3000 True Az=63.645 Ze=-38.55 Az status=0009 Ze status=0008 14:06:41 Check angles 14:06:41 SkyScan query 14:06:42 SkyScan query done: ret=0 az=45.87<-3058 ze=-38.535<-14569 Statuses=0009 0008 14:06:42 Msec=3750 True Az=45.87 Ze=-38.535 Az status=0009 Ze status=0008 14:06:42 Check angles 14:06:42 SkyScan query 14:06:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:06:43 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:06:43 Message to Master queued w/err=0: serial=11934 error=0 14:06:48 Received message from Master: op=Filter serial=11935 14:06:48 Color wheel filter change from 0 to 0 14:06:48 FLIGetFilterPos err=0 currentPosition=0 14:06:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:06:48 Filter is already there-color wheel unchanged 14:06:48 Received message from Master: op=Shutter serial=11936 14:06:48 Shutter LASER close 14:06:48 Received message from Camera: op=State serial=11938 14:06:48 GetSingleValue result=40 Value=cccccccc 14:06:48 SkyScan query 14:06:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:06:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:48 Parameters OK 14:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:48 Set A/D data flow result=40 14:06:48 Set A/D channel type result=40 14:06:48 Set A/D encoding result=40 14:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:48 Set channel filter=0.000000e+000 result=40 14:06:48 Config A/D Result=40 14:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:48 Get A/D filter: -9.255963e+061 result=40 14:06:48 Get A/D value=-858993460 result=40 14:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:06:48 Parameters OK 14:06:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:06:48 Set A/D data flow result=40 14:06:48 Set A/D channel type result=40 14:06:48 Set A/D encoding result=40 14:06:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:06:48 Set channel filter=0.000000e+000 result=40 14:06:48 Config A/D Result=40 14:06:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:06:48 Get A/D filter: -9.255963e+061 result=40 14:06:48 Get A/D value=-858993460 result=40 14:06:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:06:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:06:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:06:48 Aux= 14:06:48 Message to Camera, serial 11938 queued 14:07:19 Received message from Master: op=PointingHead serial=11945 14:07:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:07:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:07:20 Point started: ret=0 14:07:20 point_skyscan result=0 14:07:20 Check angles 14:07:20 SkyScan query 14:07:21 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.34<-16556 Statuses=0009 0009 14:07:21 Msec=0 True Az=63.87 Ze=-68.34 Az status=0009 Ze status=0009 14:07:21 Check angles 14:07:21 SkyScan query 14:07:22 SkyScan query done: ret=0 az=81.9<-5460 ze=-89.73<-17982 Statuses=0009 0009 14:07:22 Msec=750 True Az=81.9 Ze=-89.73 Az status=0009 Ze status=0009 14:07:22 Check angles 14:07:22 SkyScan query 14:07:22 SkyScan query done: ret=0 az=99.45<-6630 ze=-110.745<-19383 Statuses=0009 0009 14:07:22 Msec=1500 True Az=99.45 Ze=-110.745 Az status=0009 Ze status=0009 14:07:23 Check angles 14:07:23 SkyScan query 14:07:23 SkyScan query done: ret=0 az=117.15<-7810 ze=-132.06<-20804 Statuses=0009 0009 14:07:23 Msec=2250 True Az=117.15 Ze=-132.06 Az status=0009 Ze status=0009 14:07:23 Check angles 14:07:23 SkyScan query 14:07:24 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 14:07:24 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 14:07:24 Check angles 14:07:24 SkyScan query 14:07:25 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:07:25 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:07:25 Message to Master queued w/err=0: serial=11945 error=0 14:07:30 Received message from Master: op=Filter serial=11946 14:07:30 Color wheel filter change from 0 to 0 14:07:30 FLIGetFilterPos err=0 currentPosition=0 14:07:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:07:30 Filter is already there-color wheel unchanged 14:07:30 Received message from Master: op=Shutter serial=11947 14:07:30 Shutter LASER close 14:07:30 Received message from Camera: op=State serial=11949 14:07:30 GetSingleValue result=40 Value=cccccccc 14:07:30 SkyScan query 14:07:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:07:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:30 Parameters OK 14:07:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:30 Set A/D data flow result=40 14:07:30 Set A/D channel type result=40 14:07:30 Set A/D encoding result=40 14:07:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:30 Set channel filter=0.000000e+000 result=40 14:07:30 Config A/D Result=40 14:07:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:30 Get A/D filter: -9.255963e+061 result=40 14:07:30 Get A/D value=-858993460 result=40 14:07:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:07:30 Parameters OK 14:07:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:07:30 Set A/D data flow result=40 14:07:30 Set A/D channel type result=40 14:07:30 Set A/D encoding result=40 14:07:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:07:30 Set channel filter=0.000000e+000 result=40 14:07:30 Config A/D Result=40 14:07:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:07:30 Get A/D filter: -9.255963e+061 result=40 14:07:30 Get A/D value=-858993460 result=40 14:07:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:07:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:07:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:07:30 Aux= 14:07:30 Message to Camera, serial 11949 queued 14:08:01 Received message from Master: op=PointingHead serial=11956 14:08:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:08:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:08:02 Point started: ret=0 14:08:02 point_skyscan result=0 14:08:02 Check angles 14:08:02 SkyScan query 14:08:03 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 14:08:03 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 14:08:03 Check angles 14:08:03 SkyScan query 14:08:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:08:04 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:08:04 Message to Master queued w/err=0: serial=11956 error=0 14:08:09 Received message from Master: op=Filter serial=11957 14:08:09 Color wheel filter change from 0 to 0 14:08:09 FLIGetFilterPos err=0 currentPosition=0 14:08:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:09 Filter is already there-color wheel unchanged 14:08:09 Received message from Master: op=Shutter serial=11958 14:08:09 Shutter LASER open 14:08:09 Received message from Camera: op=State serial=11960 14:08:09 GetSingleValue result=40 Value=cccccccc 14:08:09 SkyScan query 14:08:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:08:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:10 Parameters OK 14:08:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:10 Set A/D data flow result=40 14:08:10 Set A/D channel type result=40 14:08:10 Set A/D encoding result=40 14:08:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:10 Set channel filter=0.000000e+000 result=40 14:08:10 Config A/D Result=40 14:08:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:10 Get A/D filter: -9.255963e+061 result=40 14:08:10 Get A/D value=-858993460 result=40 14:08:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:10 Parameters OK 14:08:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:10 Set A/D data flow result=40 14:08:10 Set A/D channel type result=40 14:08:10 Set A/D encoding result=40 14:08:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:10 Set channel filter=0.000000e+000 result=40 14:08:10 Config A/D Result=40 14:08:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:10 Get A/D filter: -9.255963e+061 result=40 14:08:10 Get A/D value=-858993460 result=40 14:08:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:10 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:10 Aux= 14:08:10 Message to Camera, serial 11960 queued 14:08:12 Received message from Master: op=Shutter serial=11964 14:08:12 Shutter LASER close 14:08:13 Received message from Master: op=PointingHead serial=11968 14:08:13 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:08:13 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:08:13 Point started: ret=0 14:08:13 point_skyscan result=0 14:08:14 Check angles 14:08:14 SkyScan query 14:08:14 SkyScan query done: ret=0 az=135.75<-9050 ze=-143.46<-21564 Statuses=0009 0009 14:08:14 Msec=0 True Az=135.75 Ze=-143.46 Az status=0009 Ze status=0009 14:08:15 Check angles 14:08:15 SkyScan query 14:08:15 SkyScan query done: ret=0 az=153.36<-10224 ze=-122.49<-20166 Statuses=0009 0009 14:08:15 Msec=750 True Az=153.36 Ze=-122.49 Az status=0009 Ze status=0009 14:08:15 Check angles 14:08:15 SkyScan query 14:08:16 SkyScan query done: ret=0 az=170.73<-11382 ze=-101.55<-18770 Statuses=0009 0009 14:08:16 Msec=1500 True Az=170.73 Ze=-101.55 Az status=0009 Ze status=0009 14:08:16 Check angles 14:08:16 SkyScan query 14:08:17 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.565<-17371 Statuses=0008 0009 14:08:17 Msec=2250 True Az=176.025 Ze=-80.565 Az status=0008 Ze status=0009 14:08:17 Check angles 14:08:17 SkyScan query 14:08:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.625<-15975 Statuses=0008 0009 14:08:17 Msec=3000 True Az=175.995 Ze=-59.625 Az status=0008 Ze status=0009 14:08:18 Check angles 14:08:18 SkyScan query 14:08:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:08:18 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:08:18 Message to Master queued w/err=0: serial=11968 error=0 14:08:23 Received message from Master: op=Filter serial=11969 14:08:23 Color wheel filter change from 0 to 0 14:08:23 FLIGetFilterPos err=0 currentPosition=0 14:08:23 FLIGetStepsRemaining err=0 RemainingSteps=0 14:08:23 Filter is already there-color wheel unchanged 14:08:23 Received message from Master: op=Shutter serial=11970 14:08:23 Shutter LASER close 14:08:24 Received message from Camera: op=State serial=11972 14:08:24 GetSingleValue result=40 Value=cccccccc 14:08:24 SkyScan query 14:08:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:08:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:24 Parameters OK 14:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:24 Set A/D data flow result=40 14:08:24 Set A/D channel type result=40 14:08:24 Set A/D encoding result=40 14:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:24 Set channel filter=0.000000e+000 result=40 14:08:24 Config A/D Result=40 14:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:24 Get A/D filter: -9.255963e+061 result=40 14:08:24 Get A/D value=-858993460 result=40 14:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:08:24 Parameters OK 14:08:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:08:24 Set A/D data flow result=40 14:08:24 Set A/D channel type result=40 14:08:24 Set A/D encoding result=40 14:08:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:08:24 Set channel filter=0.000000e+000 result=40 14:08:24 Config A/D Result=40 14:08:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:08:24 Get A/D filter: -9.255963e+061 result=40 14:08:24 Get A/D value=-858993460 result=40 14:08:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:08:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:08:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:08:24 Aux= 14:08:24 Message to Camera, serial 11972 queued 14:08:55 Received message from Master: op=PointingHead serial=11979 14:08:55 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:08:55 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:08:55 Point started: ret=0 14:08:55 point_skyscan result=0 14:08:56 Check angles 14:08:56 SkyScan query 14:08:57 SkyScan query done: ret=0 az=152.55<-10170 ze=-21.27<-13418 Statuses=0009 0009 14:08:57 Msec=0 True Az=152.55 Ze=-21.27 Az status=0009 Ze status=0009 14:08:57 Check angles 14:08:57 SkyScan query 14:08:57 SkyScan query done: ret=0 az=134.595<-8973 ze=0.12<-11992 Statuses=0009 0009 14:08:57 Msec=750 True Az=134.595 Ze=0.12 Az status=0009 Ze status=0009 14:08:58 Check angles 14:08:58 SkyScan query 14:08:58 SkyScan query done: ret=0 az=117.045<-7803 ze=21.06<-10596 Statuses=0009 0009 14:08:58 Msec=1500 True Az=117.045 Ze=21.06 Az status=0009 Ze status=0009 14:08:58 Check angles 14:08:58 SkyScan query 14:08:59 SkyScan query done: ret=0 az=99.6<-6640 ze=42.045<-9197 Statuses=0009 0009 14:08:59 Msec=2250 True Az=99.6 Ze=42.045 Az status=0009 Ze status=0009 14:08:59 Check angles 14:08:59 SkyScan query 14:09:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 14:09:00 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 14:09:00 Check angles 14:09:00 SkyScan query 14:09:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:09:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:09:00 Message to Master queued w/err=0: serial=11979 error=0 14:09:05 Received message from Master: op=Filter serial=11980 14:09:05 Color wheel filter change from 0 to 0 14:09:05 FLIGetFilterPos err=0 currentPosition=0 14:09:05 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:05 Filter is already there-color wheel unchanged [UTC 2018-12-4 14:09:06] 14:09:06 Received message from Master: op=Shutter serial=11981 14:09:06 Shutter LASER close 14:09:06 Received message from Camera: op=State serial=11983 14:09:06 GetSingleValue result=40 Value=cccccccc 14:09:06 SkyScan query 14:09:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:09:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:06 Parameters OK 14:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:06 Set A/D data flow result=40 14:09:06 Set A/D channel type result=40 14:09:06 Set A/D encoding result=40 14:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:06 Set channel filter=0.000000e+000 result=40 14:09:06 Config A/D Result=40 14:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:06 Get A/D filter: -9.255963e+061 result=40 14:09:06 Get A/D value=-858993460 result=40 14:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:06 Parameters OK 14:09:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:06 Set A/D data flow result=40 14:09:06 Set A/D channel type result=40 14:09:06 Set A/D encoding result=40 14:09:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:06 Set channel filter=0.000000e+000 result=40 14:09:06 Config A/D Result=40 14:09:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:06 Get A/D filter: -9.255963e+061 result=40 14:09:06 Get A/D value=-858993460 result=40 14:09:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:06 Aux= 14:09:06 Message to Camera, serial 11983 queued 14:09:37 Received message from Master: op=PointingHead serial=11990 14:09:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:09:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:09:37 Point started: ret=0 14:09:37 point_skyscan result=0 14:09:38 Check angles 14:09:38 SkyScan query 14:09:39 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 14:09:39 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 14:09:39 Check angles 14:09:39 SkyScan query 14:09:39 SkyScan query done: ret=0 az=126.735<-8449 ze=38.505<-9433 Statuses=0009 0008 14:09:39 Msec=750 True Az=126.735 Ze=38.505 Az status=0009 Ze status=0008 14:09:40 Check angles 14:09:40 SkyScan query 14:09:40 SkyScan query done: ret=0 az=144.555<-9637 ze=38.505<-9433 Statuses=0009 0008 14:09:40 Msec=1500 True Az=144.555 Ze=38.505 Az status=0009 Ze status=0008 14:09:40 Check angles 14:09:40 SkyScan query 14:09:41 SkyScan query done: ret=0 az=162.405<-10827 ze=38.505<-9433 Statuses=0009 0008 14:09:41 Msec=2250 True Az=162.405 Ze=38.505 Az status=0009 Ze status=0008 14:09:41 Check angles 14:09:41 SkyScan query 14:09:42 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:09:42 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:09:42 Check angles 14:09:42 SkyScan query 14:09:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:09:43 Msec=3750 True Az=175.995 Ze=38.505 Az status=0008 Ze status=0008 14:09:43 Message to Master queued w/err=0: serial=11990 error=0 14:09:48 Received message from Master: op=Filter serial=11991 14:09:48 Color wheel filter change from 0 to 0 14:09:48 FLIGetFilterPos err=0 currentPosition=0 14:09:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:09:48 Filter is already there-color wheel unchanged 14:09:48 Received message from Master: op=Shutter serial=11992 14:09:48 Shutter LASER close 14:09:48 Received message from Camera: op=State serial=11994 14:09:48 GetSingleValue result=40 Value=cccccccc 14:09:48 SkyScan query 14:09:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:09:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:48 Parameters OK 14:09:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:48 Set A/D data flow result=40 14:09:48 Set A/D channel type result=40 14:09:48 Set A/D encoding result=40 14:09:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:48 Set channel filter=0.000000e+000 result=40 14:09:48 Config A/D Result=40 14:09:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:48 Get A/D filter: -9.255963e+061 result=40 14:09:48 Get A/D value=-858993460 result=40 14:09:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:09:48 Parameters OK 14:09:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:09:48 Set A/D data flow result=40 14:09:48 Set A/D channel type result=40 14:09:48 Set A/D encoding result=40 14:09:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:09:48 Set channel filter=0.000000e+000 result=40 14:09:48 Config A/D Result=40 14:09:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:09:48 Get A/D filter: -9.255963e+061 result=40 14:09:48 Get A/D value=-858993460 result=40 14:09:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:09:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:09:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:09:48 Aux= 14:09:48 Message to Camera, serial 11994 queued 14:10:19 Received message from Master: op=PointingHead serial=12001 14:10:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:10:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:10:19 Point started: ret=0 14:10:19 point_skyscan result=0 14:10:20 Check angles 14:10:20 SkyScan query 14:10:21 SkyScan query done: ret=0 az=153.225<-10215 ze=8.97<-11402 Statuses=0009 0009 14:10:21 Msec=0 True Az=153.225 Ze=8.97 Az status=0009 Ze status=0009 14:10:21 Check angles 14:10:21 SkyScan query 14:10:22 SkyScan query done: ret=0 az=135.795<-9053 ze=-11.97<-12798 Statuses=0009 0009 14:10:22 Msec=750 True Az=135.795 Ze=-11.97 Az status=0009 Ze status=0009 14:10:22 Check angles 14:10:22 SkyScan query 14:10:22 SkyScan query done: ret=0 az=118.305<-7887 ze=-33.105<-14207 Statuses=0009 0009 14:10:22 Msec=1500 True Az=118.305 Ze=-33.105 Az status=0009 Ze status=0009 14:10:23 Check angles 14:10:23 SkyScan query 14:10:23 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 14:10:23 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 14:10:23 Check angles 14:10:23 SkyScan query 14:10:24 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 14:10:24 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 14:10:24 Check angles 14:10:24 SkyScan query 14:10:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:10:25 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:10:25 Message to Master queued w/err=0: serial=12001 error=0 14:10:30 Received message from Master: op=Filter serial=12002 14:10:30 Color wheel filter change from 0 to 0 14:10:30 FLIGetFilterPos err=0 currentPosition=0 14:10:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:10:30 Filter is already there-color wheel unchanged 14:10:30 Received message from Master: op=Shutter serial=12003 14:10:30 Shutter LASER close 14:10:30 Received message from Camera: op=State serial=12005 14:10:30 GetSingleValue result=40 Value=cccccccc 14:10:30 SkyScan query 14:10:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:10:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:30 Parameters OK 14:10:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:30 Set A/D data flow result=40 14:10:30 Set A/D channel type result=40 14:10:30 Set A/D encoding result=40 14:10:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:30 Set channel filter=0.000000e+000 result=40 14:10:30 Config A/D Result=40 14:10:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:30 Get A/D filter: -9.255963e+061 result=40 14:10:30 Get A/D value=-858993460 result=40 14:10:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:10:30 Parameters OK 14:10:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:10:30 Set A/D data flow result=40 14:10:30 Set A/D channel type result=40 14:10:30 Set A/D encoding result=40 14:10:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:10:30 Set channel filter=0.000000e+000 result=40 14:10:30 Config A/D Result=40 14:10:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:10:30 Get A/D filter: -9.255963e+061 result=40 14:10:30 Get A/D value=-858993460 result=40 14:10:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:10:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:10:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:10:30 Aux= 14:10:30 Message to Camera, serial 12005 queued 14:11:01 Received message from Master: op=PointingHead serial=12012 14:11:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:11:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:11:02 Point started: ret=0 14:11:02 point_skyscan result=0 14:11:02 Check angles 14:11:02 SkyScan query 14:11:03 SkyScan query done: ret=0 az=109.23<-7282 ze=-81.615<-17441 Statuses=0009 0009 14:11:03 Msec=0 True Az=109.23 Ze=-81.615 Az status=0009 Ze status=0009 14:11:03 Check angles 14:11:03 SkyScan query 14:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.555<-18837 Statuses=0008 0009 14:11:04 Msec=750 True Az=112.995 Ze=-102.555 Az status=0008 Ze status=0009 14:11:04 Check angles 14:11:04 SkyScan query 14:11:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 14:11:04 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 14:11:05 Check angles 14:11:05 SkyScan query 14:11:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 14:11:05 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 14:11:05 Check angles 14:11:05 SkyScan query 14:11:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.405<-23027 Statuses=0008 0009 14:11:06 Msec=3000 True Az=112.995 Ze=-165.405 Az status=0008 Ze status=0009 14:11:06 Check angles 14:11:06 SkyScan query 14:11:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:11:07 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:11:07 Message to Master queued w/err=0: serial=12012 error=0 14:11:12 Received message from Master: op=Filter serial=12013 14:11:12 Color wheel filter change from 0 to 0 14:11:12 FLIGetFilterPos err=0 currentPosition=0 14:11:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:12 Filter is already there-color wheel unchanged 14:11:12 Received message from Master: op=Shutter serial=12014 14:11:12 Shutter LASER open 14:11:12 Received message from Camera: op=State serial=12016 14:11:12 GetSingleValue result=40 Value=cccccccc 14:11:12 SkyScan query 14:11:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:11:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:13 Parameters OK 14:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:13 Set A/D data flow result=40 14:11:13 Set A/D channel type result=40 14:11:13 Set A/D encoding result=40 14:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:13 Set channel filter=0.000000e+000 result=40 14:11:13 Config A/D Result=40 14:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:13 Get A/D filter: -9.255963e+061 result=40 14:11:13 Get A/D value=-858993460 result=40 14:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:13 Parameters OK 14:11:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:13 Set A/D data flow result=40 14:11:13 Set A/D channel type result=40 14:11:13 Set A/D encoding result=40 14:11:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:13 Set channel filter=0.000000e+000 result=40 14:11:13 Config A/D Result=40 14:11:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:13 Get A/D filter: -9.255963e+061 result=40 14:11:13 Get A/D value=-858993460 result=40 14:11:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:13 Aux= 14:11:13 Message to Camera, serial 12016 queued 14:11:15 Received message from Master: op=Shutter serial=12020 14:11:15 Shutter LASER close 14:11:15 Received message from Master: op=PointingHead serial=12024 14:11:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:11:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:11:16 Point started: ret=0 14:11:16 point_skyscan result=0 14:11:17 Check angles 14:11:17 SkyScan query 14:11:17 SkyScan query done: ret=0 az=89.625<-5975 ze=156.885<-1541 Statuses=0009 0009 14:11:17 Msec=0 True Az=89.625 Ze=156.885 Az status=0009 Ze status=0009 14:11:17 Check angles 14:11:17 SkyScan query 14:11:18 SkyScan query done: ret=0 az=72.075<-4805 ze=135.9<-2940 Statuses=0009 0009 14:11:18 Msec=750 True Az=72.075 Ze=135.9 Az status=0009 Ze status=0009 14:11:18 Check angles 14:11:18 SkyScan query 14:11:19 SkyScan query done: ret=0 az=54.78<-3652 ze=114.96<-4336 Statuses=0009 0009 14:11:19 Msec=1500 True Az=54.78 Ze=114.96 Az status=0009 Ze status=0009 14:11:19 Check angles 14:11:19 SkyScan query 14:11:19 SkyScan query done: ret=0 az=40.86<-2724 ze=93.99<-5734 Statuses=0009 0009 14:11:19 Msec=2250 True Az=40.86 Ze=93.99 Az status=0009 Ze status=0009 14:11:20 Check angles 14:11:20 SkyScan query 14:11:20 SkyScan query done: ret=0 az=41.01<-2734 ze=73.05<-7130 Statuses=0008 0009 14:11:20 Msec=3000 True Az=41.01 Ze=73.05 Az status=0008 Ze status=0009 14:11:20 Check angles 14:11:20 SkyScan query 14:11:21 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 14:11:21 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 14:11:21 Check angles 14:11:21 SkyScan query 14:11:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:11:22 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:11:22 Message to Master queued w/err=0: serial=12024 error=0 14:11:27 Received message from Master: op=Filter serial=12025 14:11:27 Color wheel filter change from 0 to 0 14:11:27 FLIGetFilterPos err=0 currentPosition=0 14:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:11:27 Filter is already there-color wheel unchanged 14:11:27 Received message from Master: op=Shutter serial=12026 14:11:27 Shutter LASER close 14:11:27 Received message from Camera: op=State serial=12028 14:11:27 GetSingleValue result=40 Value=cccccccc 14:11:27 SkyScan query 14:11:28 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:28 Parameters OK 14:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:28 Set A/D data flow result=40 14:11:28 Set A/D channel type result=40 14:11:28 Set A/D encoding result=40 14:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:28 Set channel filter=0.000000e+000 result=40 14:11:28 Config A/D Result=40 14:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:28 Get A/D filter: -9.255963e+061 result=40 14:11:28 Get A/D value=-858993460 result=40 14:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:11:28 Parameters OK 14:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:11:28 Set A/D data flow result=40 14:11:28 Set A/D channel type result=40 14:11:28 Set A/D encoding result=40 14:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:11:28 Set channel filter=0.000000e+000 result=40 14:11:28 Config A/D Result=40 14:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:11:28 Get A/D filter: -9.255963e+061 result=40 14:11:28 Get A/D value=-858993460 result=40 14:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:11:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:11:28 Aux= 14:11:28 Message to Camera, serial 12028 queued 14:11:58 Received message from Master: op=PointingHead serial=12035 14:11:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:11:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:11:59 Point started: ret=0 14:11:59 point_skyscan result=0 14:12:00 Check angles 14:12:00 SkyScan query 14:12:00 SkyScan query done: ret=0 az=63.915<-4261 ze=66.555<-7563 Statuses=0009 0008 14:12:00 Msec=0 True Az=63.915 Ze=66.555 Az status=0009 Ze status=0008 14:12:00 Check angles 14:12:00 SkyScan query 14:12:01 SkyScan query done: ret=0 az=81.45<-5430 ze=66.495<-7567 Statuses=0009 0008 14:12:01 Msec=750 True Az=81.45 Ze=66.495 Az status=0009 Ze status=0008 14:12:01 Check angles 14:12:01 SkyScan query 14:12:02 SkyScan query done: ret=0 az=99.42<-6628 ze=66.495<-7567 Statuses=0009 0008 14:12:02 Msec=1500 True Az=99.42 Ze=66.495 Az status=0009 Ze status=0008 14:12:02 Check angles 14:12:02 SkyScan query 14:12:02 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 14:12:02 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 14:12:03 Check angles 14:12:03 SkyScan query 14:12:03 SkyScan query done: ret=0 az=134.685<-8979 ze=66.495<-7567 Statuses=0009 0008 14:12:03 Msec=3000 True Az=134.685 Ze=66.495 Az status=0009 Ze status=0008 14:12:03 Check angles 14:12:03 SkyScan query 14:12:04 SkyScan query done: ret=0 az=151.92<-10128 ze=66.495<-7567 Statuses=0009 0008 14:12:04 Msec=3750 True Az=151.92 Ze=66.495 Az status=0009 Ze status=0008 14:12:04 Check angles 14:12:04 SkyScan query 14:12:05 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:12:05 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:12:05 Message to Master queued w/err=0: serial=12035 error=0 [UTC 2018-12-4 14:12:09] 14:12:10 Received message from Master: op=Filter serial=12036 14:12:10 Color wheel filter change from 0 to 0 14:12:10 FLIGetFilterPos err=0 currentPosition=0 14:12:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:10 Filter is already there-color wheel unchanged 14:12:10 Received message from Master: op=Shutter serial=12037 14:12:10 Shutter LASER close 14:12:10 Received message from Camera: op=State serial=12039 14:12:10 GetSingleValue result=40 Value=cccccccc 14:12:10 SkyScan query 14:12:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:10 Parameters OK 14:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:10 Set A/D data flow result=40 14:12:10 Set A/D channel type result=40 14:12:10 Set A/D encoding result=40 14:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:10 Set channel filter=0.000000e+000 result=40 14:12:10 Config A/D Result=40 14:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:10 Get A/D filter: -9.255963e+061 result=40 14:12:10 Get A/D value=-858993460 result=40 14:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:10 Parameters OK 14:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:10 Set A/D data flow result=40 14:12:10 Set A/D channel type result=40 14:12:10 Set A/D encoding result=40 14:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:10 Set channel filter=0.000000e+000 result=40 14:12:10 Config A/D Result=40 14:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:10 Get A/D filter: -9.255963e+061 result=40 14:12:10 Get A/D value=-858993460 result=40 14:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:10 Aux= 14:12:10 Message to Camera, serial 12039 queued 14:12:41 Received message from Master: op=PointingHead serial=12046 14:12:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:12:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:12:42 Point started: ret=0 14:12:42 point_skyscan result=0 14:12:42 Check angles 14:12:42 SkyScan query 14:12:43 SkyScan query done: ret=0 az=134.835<-8989 ze=36.525<-9565 Statuses=0009 0009 14:12:43 Msec=0 True Az=134.835 Ze=36.525 Az status=0009 Ze status=0009 14:12:43 Check angles 14:12:43 SkyScan query 14:12:44 SkyScan query done: ret=0 az=117.315<-7821 ze=15.57<-10962 Statuses=0009 0009 14:12:44 Msec=750 True Az=117.315 Ze=15.57 Az status=0009 Ze status=0009 14:12:44 Check angles 14:12:44 SkyScan query 14:12:44 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.415<-12361 Statuses=0009 0009 14:12:44 Msec=1500 True Az=99.915 Ze=-5.415 Az status=0009 Ze status=0009 14:12:45 Check angles 14:12:45 SkyScan query 14:12:45 SkyScan query done: ret=0 az=82.095<-5473 ze=-26.79<-13786 Statuses=0009 0009 14:12:45 Msec=2250 True Az=82.095 Ze=-26.79 Az status=0009 Ze status=0009 14:12:45 Check angles 14:12:45 SkyScan query 14:12:46 SkyScan query done: ret=0 az=64.275<-4285 ze=-38.565<-14571 Statuses=0009 0008 14:12:46 Msec=3000 True Az=64.275 Ze=-38.565 Az status=0009 Ze status=0008 14:12:46 Check angles 14:12:46 SkyScan query 14:12:47 SkyScan query done: ret=0 az=46.47<-3098 ze=-38.52<-14568 Statuses=0009 0008 14:12:47 Msec=3750 True Az=46.47 Ze=-38.52 Az status=0009 Ze status=0008 14:12:47 Check angles 14:12:47 SkyScan query 14:12:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:12:48 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:12:48 Message to Master queued w/err=0: serial=12046 error=0 14:12:53 Received message from Master: op=Filter serial=12047 14:12:53 Color wheel filter change from 0 to 0 14:12:53 FLIGetFilterPos err=0 currentPosition=0 14:12:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:12:53 Filter is already there-color wheel unchanged 14:12:53 Received message from Master: op=Shutter serial=12048 14:12:53 Shutter LASER close 14:12:53 Received message from Camera: op=State serial=12050 14:12:53 GetSingleValue result=40 Value=cccccccc 14:12:53 SkyScan query 14:12:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:12:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:53 Parameters OK 14:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:53 Set A/D data flow result=40 14:12:53 Set A/D channel type result=40 14:12:53 Set A/D encoding result=40 14:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:53 Set channel filter=0.000000e+000 result=40 14:12:53 Config A/D Result=40 14:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:53 Get A/D filter: -9.255963e+061 result=40 14:12:53 Get A/D value=-858993460 result=40 14:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:12:53 Parameters OK 14:12:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:12:53 Set A/D data flow result=40 14:12:53 Set A/D channel type result=40 14:12:53 Set A/D encoding result=40 14:12:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:12:53 Set channel filter=0.000000e+000 result=40 14:12:53 Config A/D Result=40 14:12:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:12:53 Get A/D filter: -9.255963e+061 result=40 14:12:53 Get A/D value=-858993460 result=40 14:12:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:12:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:12:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:12:53 Aux= 14:12:53 Message to Camera, serial 12050 queued 14:13:24 Received message from Master: op=PointingHead serial=12057 14:13:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:13:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:13:25 Point started: ret=0 14:13:25 point_skyscan result=0 14:13:25 Check angles 14:13:25 SkyScan query 14:13:26 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.52<-16568 Statuses=0009 0009 14:13:26 Msec=0 True Az=64.05 Ze=-68.52 Az status=0009 Ze status=0009 14:13:26 Check angles 14:13:26 SkyScan query 14:13:27 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.475<-17965 Statuses=0009 0009 14:13:27 Msec=750 True Az=81.735 Ze=-89.475 Az status=0009 Ze status=0009 14:13:27 Check angles 14:13:27 SkyScan query 14:13:27 SkyScan query done: ret=0 az=99.21<-6614 ze=-110.4<-19360 Statuses=0009 0009 14:13:27 Msec=1500 True Az=99.21 Ze=-110.4 Az status=0009 Ze status=0009 14:13:28 Check angles 14:13:28 SkyScan query 14:13:28 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.355<-20757 Statuses=0009 0009 14:13:28 Msec=2250 True Az=116.7 Ze=-131.355 Az status=0009 Ze status=0009 14:13:28 Check angles 14:13:28 SkyScan query 14:13:29 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 14:13:29 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 14:13:29 Check angles 14:13:29 SkyScan query 14:13:30 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:13:30 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:13:30 Message to Master queued w/err=0: serial=12057 error=0 14:13:35 Received message from Master: op=Filter serial=12058 14:13:35 Color wheel filter change from 0 to 0 14:13:35 FLIGetFilterPos err=0 currentPosition=0 14:13:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:13:35 Filter is already there-color wheel unchanged 14:13:35 Received message from Master: op=Shutter serial=12059 14:13:35 Shutter LASER close 14:13:35 Received message from Camera: op=State serial=12061 14:13:35 GetSingleValue result=40 Value=cccccccc 14:13:35 SkyScan query 14:13:36 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:13:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:36 Parameters OK 14:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:36 Set A/D data flow result=40 14:13:36 Set A/D channel type result=40 14:13:36 Set A/D encoding result=40 14:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:36 Set channel filter=0.000000e+000 result=40 14:13:36 Config A/D Result=40 14:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:36 Get A/D filter: -9.255963e+061 result=40 14:13:36 Get A/D value=-858993460 result=40 14:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:13:36 Parameters OK 14:13:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:13:36 Set A/D data flow result=40 14:13:36 Set A/D channel type result=40 14:13:36 Set A/D encoding result=40 14:13:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:13:36 Set channel filter=0.000000e+000 result=40 14:13:36 Config A/D Result=40 14:13:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:13:36 Get A/D filter: -9.255963e+061 result=40 14:13:36 Get A/D value=-858993460 result=40 14:13:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:13:36 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:13:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:13:36 Aux= 14:13:36 Message to Camera, serial 12061 queued 14:14:06 Received message from Master: op=PointingHead serial=12068 14:14:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:14:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:14:07 Point started: ret=0 14:14:07 point_skyscan result=0 14:14:07 Check angles 14:14:07 SkyScan query 14:14:08 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 14:14:08 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 14:14:08 Check angles 14:14:08 SkyScan query 14:14:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:14:09 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:14:09 Message to Master queued w/err=0: serial=12068 error=0 14:14:14 Received message from Master: op=Filter serial=12069 14:14:14 Color wheel filter change from 0 to 0 14:14:14 FLIGetFilterPos err=0 currentPosition=0 14:14:14 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:14 Filter is already there-color wheel unchanged 14:14:14 Received message from Master: op=Shutter serial=12070 14:14:14 Shutter LASER open 14:14:14 Received message from Camera: op=State serial=12072 14:14:14 GetSingleValue result=40 Value=cccccccc 14:14:14 SkyScan query 14:14:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:14:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:15 Parameters OK 14:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:15 Set A/D data flow result=40 14:14:15 Set A/D channel type result=40 14:14:15 Set A/D encoding result=40 14:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:15 Set channel filter=0.000000e+000 result=40 14:14:15 Config A/D Result=40 14:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:15 Get A/D filter: -9.255963e+061 result=40 14:14:15 Get A/D value=-858993460 result=40 14:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:15 Parameters OK 14:14:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:15 Set A/D data flow result=40 14:14:15 Set A/D channel type result=40 14:14:15 Set A/D encoding result=40 14:14:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:15 Set channel filter=0.000000e+000 result=40 14:14:15 Config A/D Result=40 14:14:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:15 Get A/D filter: -9.255963e+061 result=40 14:14:15 Get A/D value=-858993460 result=40 14:14:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:15 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:15 Aux= 14:14:15 Message to Camera, serial 12072 queued 14:14:17 Received message from Master: op=Shutter serial=12076 14:14:17 Shutter LASER close 14:14:18 Received message from Master: op=PointingHead serial=12080 14:14:18 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:14:18 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:14:18 Point started: ret=0 14:14:18 point_skyscan result=0 14:14:19 Check angles 14:14:19 SkyScan query 14:14:19 SkyScan query done: ret=0 az=135.915<-9061 ze=-143.295<-21553 Statuses=0009 0009 14:14:19 Msec=0 True Az=135.915 Ze=-143.295 Az status=0009 Ze status=0009 14:14:20 Check angles 14:14:20 SkyScan query 14:14:20 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.34<-20156 Statuses=0009 0009 14:14:20 Msec=750 True Az=153.39 Ze=-122.34 Az status=0009 Ze status=0009 14:14:20 Check angles 14:14:20 SkyScan query 14:14:21 SkyScan query done: ret=0 az=171.21<-11414 ze=-100.965<-18731 Statuses=0009 0009 14:14:21 Msec=1500 True Az=171.21 Ze=-100.965 Az status=0009 Ze status=0009 14:14:21 Check angles 14:14:21 SkyScan query 14:14:22 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.025<-17335 Statuses=0008 0009 14:14:22 Msec=2250 True Az=176.025 Ze=-80.025 Az status=0008 Ze status=0009 14:14:22 Check angles 14:14:22 SkyScan query 14:14:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.07<-15938 Statuses=0008 0009 14:14:22 Msec=3000 True Az=175.995 Ze=-59.07 Az status=0008 Ze status=0009 14:14:23 Check angles 14:14:23 SkyScan query 14:14:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:14:23 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:14:23 Message to Master queued w/err=0: serial=12080 error=0 14:14:28 Received message from Master: op=Filter serial=12081 14:14:28 Color wheel filter change from 0 to 0 14:14:28 FLIGetFilterPos err=0 currentPosition=0 14:14:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:14:28 Filter is already there-color wheel unchanged 14:14:28 Received message from Master: op=Shutter serial=12082 14:14:28 Shutter LASER close 14:14:29 Received message from Camera: op=State serial=12084 14:14:29 GetSingleValue result=40 Value=cccccccc 14:14:29 SkyScan query 14:14:29 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:14:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:29 Parameters OK 14:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:29 Set A/D data flow result=40 14:14:29 Set A/D channel type result=40 14:14:29 Set A/D encoding result=40 14:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:29 Set channel filter=0.000000e+000 result=40 14:14:29 Config A/D Result=40 14:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:29 Get A/D filter: -9.255963e+061 result=40 14:14:29 Get A/D value=-858993460 result=40 14:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:14:29 Parameters OK 14:14:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:14:29 Set A/D data flow result=40 14:14:29 Set A/D channel type result=40 14:14:29 Set A/D encoding result=40 14:14:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:14:29 Set channel filter=0.000000e+000 result=40 14:14:29 Config A/D Result=40 14:14:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:14:29 Get A/D filter: -9.255963e+061 result=40 14:14:29 Get A/D value=-858993460 result=40 14:14:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:14:29 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:14:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:14:29 Aux= 14:14:29 Message to Camera, serial 12084 queued 14:15:00 Received message from Master: op=PointingHead serial=12091 14:15:00 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:15:00 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:15:00 Point started: ret=0 14:15:00 point_skyscan result=0 14:15:01 Check angles 14:15:01 SkyScan query 14:15:02 SkyScan query done: ret=0 az=152.7<-10180 ze=-21.285<-13419 Statuses=0009 0009 14:15:02 Msec=0 True Az=152.7 Ze=-21.285 Az status=0009 Ze status=0009 14:15:02 Check angles 14:15:02 SkyScan query 14:15:02 SkyScan query done: ret=0 az=134.685<-8979 ze=0.12<-11992 Statuses=0009 0009 14:15:02 Msec=750 True Az=134.685 Ze=0.12 Az status=0009 Ze status=0009 14:15:03 Check angles 14:15:03 SkyScan query 14:15:03 SkyScan query done: ret=0 az=117.285<-7819 ze=21.075<-10595 Statuses=0009 0009 14:15:03 Msec=1500 True Az=117.285 Ze=21.075 Az status=0009 Ze status=0009 14:15:03 Check angles 14:15:03 SkyScan query 14:15:04 SkyScan query done: ret=0 az=99.885<-6659 ze=42.045<-9197 Statuses=0009 0009 14:15:04 Msec=2250 True Az=99.885 Ze=42.045 Az status=0009 Ze status=0009 14:15:04 Check angles 14:15:04 SkyScan query 14:15:05 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:15:05 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:15:05 Check angles 14:15:05 SkyScan query 14:15:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:15:05 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:15:05 Message to Master queued w/err=0: serial=12091 error=0 14:15:10 Received message from Master: op=Filter serial=12092 14:15:10 Color wheel filter change from 0 to 0 14:15:10 FLIGetFilterPos err=0 currentPosition=0 14:15:10 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:10 Filter is already there-color wheel unchanged 14:15:11 Received message from Master: op=Shutter serial=12093 14:15:11 Shutter LASER close 14:15:11 Received message from Camera: op=State serial=12095 14:15:11 GetSingleValue result=40 Value=cccccccc 14:15:11 SkyScan query 14:15:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:15:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:11 Parameters OK 14:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:11 Set A/D data flow result=40 14:15:11 Set A/D channel type result=40 14:15:11 Set A/D encoding result=40 14:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:11 Set channel filter=0.000000e+000 result=40 14:15:11 Config A/D Result=40 14:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:11 Get A/D filter: -9.255963e+061 result=40 14:15:11 Get A/D value=-858993460 result=40 14:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:11 Parameters OK 14:15:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:11 Set A/D data flow result=40 14:15:11 Set A/D channel type result=40 14:15:11 Set A/D encoding result=40 14:15:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:11 Set channel filter=0.000000e+000 result=40 14:15:11 Config A/D Result=40 14:15:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:11 Get A/D filter: -9.255963e+061 result=40 14:15:11 Get A/D value=-858993460 result=40 14:15:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:11 Aux= 14:15:11 Message to Camera, serial 12095 queued 14:15:42 Received message from Master: op=PointingHead serial=12102 14:15:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:15:42 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:15:42 Point started: ret=0 14:15:42 point_skyscan result=0 14:15:43 Check angles 14:15:43 SkyScan query 14:15:44 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 14:15:44 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 14:15:44 Check angles 14:15:44 SkyScan query 14:15:44 SkyScan query done: ret=0 az=126.885<-8459 ze=38.505<-9433 Statuses=0009 0008 14:15:44 Msec=750 True Az=126.885 Ze=38.505 Az status=0009 Ze status=0008 14:15:45 Check angles 14:15:45 SkyScan query 14:15:45 SkyScan query done: ret=0 az=144.675<-9645 ze=38.505<-9433 Statuses=0009 0008 14:15:45 Msec=1500 True Az=144.675 Ze=38.505 Az status=0009 Ze status=0008 14:15:45 Check angles 14:15:45 SkyScan query 14:15:46 SkyScan query done: ret=0 az=162.525<-10835 ze=38.505<-9433 Statuses=0009 0008 14:15:46 Msec=2250 True Az=162.525 Ze=38.505 Az status=0009 Ze status=0008 14:15:46 Check angles 14:15:46 SkyScan query 14:15:47 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:15:47 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:15:47 Check angles 14:15:47 SkyScan query 14:15:48 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:15:48 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:15:48 Message to Master queued w/err=0: serial=12102 error=0 14:15:53 Received message from Master: op=Filter serial=12103 14:15:53 Color wheel filter change from 0 to 0 14:15:53 FLIGetFilterPos err=0 currentPosition=0 14:15:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:15:53 Filter is already there-color wheel unchanged 14:15:53 Received message from Master: op=Shutter serial=12104 14:15:53 Shutter LASER close 14:15:53 Received message from Camera: op=State serial=12106 14:15:53 GetSingleValue result=40 Value=cccccccc 14:15:53 SkyScan query 14:15:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:15:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:53 Parameters OK 14:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:53 Set A/D data flow result=40 14:15:53 Set A/D channel type result=40 14:15:53 Set A/D encoding result=40 14:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:53 Set channel filter=0.000000e+000 result=40 14:15:53 Config A/D Result=40 14:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:53 Get A/D filter: -9.255963e+061 result=40 14:15:53 Get A/D value=-858993460 result=40 14:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:15:53 Parameters OK 14:15:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:15:53 Set A/D data flow result=40 14:15:53 Set A/D channel type result=40 14:15:53 Set A/D encoding result=40 14:15:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:15:53 Set channel filter=0.000000e+000 result=40 14:15:53 Config A/D Result=40 14:15:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:15:53 Get A/D filter: -9.255963e+061 result=40 14:15:53 Get A/D value=-858993460 result=40 14:15:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:15:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:15:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:15:53 Aux= 14:15:53 Message to Camera, serial 12106 queued 14:16:24 Received message from Master: op=PointingHead serial=12113 14:16:24 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:16:24 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:16:25 Point started: ret=0 14:16:25 point_skyscan result=0 14:16:25 Check angles 14:16:25 SkyScan query 14:16:26 SkyScan query done: ret=0 az=152.745<-10183 ze=8.325<-11445 Statuses=0009 0009 14:16:26 Msec=0 True Az=152.745 Ze=8.325 Az status=0009 Ze status=0009 14:16:26 Check angles 14:16:26 SkyScan query 14:16:27 SkyScan query done: ret=0 az=135.165<-9011 ze=-12.615<-12841 Statuses=0009 0009 14:16:27 Msec=750 True Az=135.165 Ze=-12.615 Az status=0009 Ze status=0009 14:16:27 Check angles 14:16:27 SkyScan query 14:16:27 SkyScan query done: ret=0 az=117.72<-7848 ze=-33.615<-14241 Statuses=0009 0009 14:16:27 Msec=1500 True Az=117.72 Ze=-33.615 Az status=0009 Ze status=0009 14:16:28 Check angles 14:16:28 SkyScan query 14:16:28 SkyScan query done: ret=0 az=99.96<-6664 ze=-51.555<-15437 Statuses=0009 0009 14:16:28 Msec=2250 True Az=99.96 Ze=-51.555 Az status=0009 Ze status=0009 14:16:28 Check angles 14:16:28 SkyScan query 14:16:29 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:16:29 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:16:29 Check angles 14:16:29 SkyScan query 14:16:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:16:30 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:16:30 Message to Master queued w/err=0: serial=12113 error=0 14:16:35 Received message from Master: op=Filter serial=12114 14:16:35 Color wheel filter change from 0 to 0 14:16:35 FLIGetFilterPos err=0 currentPosition=0 14:16:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:16:35 Filter is already there-color wheel unchanged 14:16:35 Received message from Master: op=Shutter serial=12115 14:16:35 Shutter LASER close 14:16:35 Received message from Camera: op=State serial=12117 14:16:35 GetSingleValue result=40 Value=cccccccc 14:16:35 SkyScan query 14:16:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:16:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:35 Parameters OK 14:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:35 Set A/D data flow result=40 14:16:35 Set A/D channel type result=40 14:16:35 Set A/D encoding result=40 14:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:35 Set channel filter=0.000000e+000 result=40 14:16:35 Config A/D Result=40 14:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:35 Get A/D filter: -9.255963e+061 result=40 14:16:35 Get A/D value=-858993460 result=40 14:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:16:35 Parameters OK 14:16:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:16:35 Set A/D data flow result=40 14:16:35 Set A/D channel type result=40 14:16:35 Set A/D encoding result=40 14:16:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:16:35 Set channel filter=0.000000e+000 result=40 14:16:35 Config A/D Result=40 14:16:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:16:35 Get A/D filter: -9.255963e+061 result=40 14:16:35 Get A/D value=-858993460 result=40 14:16:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:16:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:16:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:16:35 Aux= 14:16:35 Message to Camera, serial 12117 queued 14:17:06 Received message from Master: op=PointingHead serial=12124 14:17:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:17:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:17:07 Point started: ret=0 14:17:07 point_skyscan result=0 14:17:07 Check angles 14:17:07 SkyScan query 14:17:08 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.15<-17410 Statuses=0009 0009 14:17:08 Msec=0 True Az=108.915 Ze=-81.15 Az status=0009 Ze status=0009 14:17:08 Check angles 14:17:08 SkyScan query 14:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.09<-18806 Statuses=0008 0009 14:17:09 Msec=750 True Az=112.995 Ze=-102.09 Az status=0008 Ze status=0009 14:17:09 Check angles 14:17:09 SkyScan query 14:17:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.06<-20204 Statuses=0008 0009 14:17:09 Msec=1500 True Az=112.995 Ze=-123.06 Az status=0008 Ze status=0009 14:17:10 Check angles 14:17:10 SkyScan query 14:17:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144<-21600 Statuses=0008 0009 14:17:10 Msec=2250 True Az=112.995 Ze=-144 Az status=0008 Ze status=0009 14:17:10 Check angles 14:17:10 SkyScan query 14:17:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-164.97<-22998 Statuses=0008 0009 14:17:11 Msec=3000 True Az=112.995 Ze=-164.97 Az status=0008 Ze status=0009 14:17:11 Check angles 14:17:11 SkyScan query 14:17:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:17:12 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:17:12 Message to Master queued w/err=0: serial=12124 error=0 14:17:17 Received message from Master: op=Filter serial=12125 14:17:17 Color wheel filter change from 0 to 0 14:17:17 FLIGetFilterPos err=0 currentPosition=0 14:17:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:17 Filter is already there-color wheel unchanged 14:17:17 Received message from Master: op=Shutter serial=12126 14:17:17 Shutter LASER open 14:17:17 Received message from Camera: op=State serial=12128 14:17:17 GetSingleValue result=40 Value=cccccccc 14:17:17 SkyScan query 14:17:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:17:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:18 Parameters OK 14:17:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:18 Set A/D data flow result=40 14:17:18 Set A/D channel type result=40 14:17:18 Set A/D encoding result=40 14:17:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:18 Set channel filter=0.000000e+000 result=40 14:17:18 Config A/D Result=40 14:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:18 Get A/D filter: -9.255963e+061 result=40 14:17:18 Get A/D value=-858993460 result=40 14:17:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:18 Parameters OK 14:17:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:18 Set A/D data flow result=40 14:17:18 Set A/D channel type result=40 14:17:18 Set A/D encoding result=40 14:17:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:18 Set channel filter=0.000000e+000 result=40 14:17:18 Config A/D Result=40 14:17:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:18 Get A/D filter: -9.255963e+061 result=40 14:17:18 Get A/D value=-858993460 result=40 14:17:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:18 Aux= 14:17:18 Message to Camera, serial 12128 queued 14:17:20 Received message from Master: op=Shutter serial=12132 14:17:20 Shutter LASER close 14:17:20 Received message from Master: op=PointingHead serial=12136 14:17:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:17:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:17:21 Point started: ret=0 14:17:21 point_skyscan result=0 14:17:22 Check angles 14:17:22 SkyScan query 14:17:22 SkyScan query done: ret=0 az=90.15<-6010 ze=157.5<-1500 Statuses=0009 0009 14:17:22 Msec=0 True Az=90.15 Ze=157.5 Az status=0009 Ze status=0009 14:17:22 Check angles 14:17:22 SkyScan query 14:17:23 SkyScan query done: ret=0 az=72.78<-4852 ze=136.56<-2896 Statuses=0009 0009 14:17:23 Msec=750 True Az=72.78 Ze=136.56 Az status=0009 Ze status=0009 14:17:23 Check angles 14:17:23 SkyScan query 14:17:24 SkyScan query done: ret=0 az=54.87<-3658 ze=115.17<-4322 Statuses=0009 0009 14:17:24 Msec=1500 True Az=54.87 Ze=115.17 Az status=0009 Ze status=0009 14:17:24 Check angles 14:17:24 SkyScan query 14:17:24 SkyScan query done: ret=0 az=40.845<-2723 ze=94.2<-5720 Statuses=0009 0009 14:17:24 Msec=2250 True Az=40.845 Ze=94.2 Az status=0009 Ze status=0009 14:17:25 Check angles 14:17:25 SkyScan query 14:17:25 SkyScan query done: ret=0 az=40.995<-2733 ze=73.26<-7116 Statuses=0008 0009 14:17:25 Msec=3000 True Az=40.995 Ze=73.26 Az status=0008 Ze status=0009 14:17:25 Check angles 14:17:25 SkyScan query 14:17:26 SkyScan query done: ret=0 az=40.995<-2733 ze=52.47<-8502 Statuses=0008 0009 14:17:26 Msec=3750 True Az=40.995 Ze=52.47 Az status=0008 Ze status=0009 14:17:26 Check angles 14:17:26 SkyScan query 14:17:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:17:27 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:17:27 Message to Master queued w/err=0: serial=12136 error=0 14:17:32 Received message from Master: op=Filter serial=12137 14:17:32 Color wheel filter change from 0 to 0 14:17:32 FLIGetFilterPos err=0 currentPosition=0 14:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 14:17:32 Filter is already there-color wheel unchanged 14:17:32 Received message from Master: op=Shutter serial=12138 14:17:32 Shutter LASER close 14:17:32 Received message from Camera: op=State serial=12140 14:17:32 GetSingleValue result=40 Value=cccccccc 14:17:32 SkyScan query 14:17:33 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:17:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:33 Parameters OK 14:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:33 Set A/D data flow result=40 14:17:33 Set A/D channel type result=40 14:17:33 Set A/D encoding result=40 14:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:33 Set channel filter=0.000000e+000 result=40 14:17:33 Config A/D Result=40 14:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:33 Get A/D filter: -9.255963e+061 result=40 14:17:33 Get A/D value=-858993460 result=40 14:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:17:33 Parameters OK 14:17:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:17:33 Set A/D data flow result=40 14:17:33 Set A/D channel type result=40 14:17:33 Set A/D encoding result=40 14:17:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:17:33 Set channel filter=0.000000e+000 result=40 14:17:33 Config A/D Result=40 14:17:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:17:33 Get A/D filter: -9.255963e+061 result=40 14:17:33 Get A/D value=-858993460 result=40 14:17:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:17:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:17:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:17:33 Aux= 14:17:33 Message to Camera, serial 12140 queued 14:18:03 Received message from Master: op=PointingHead serial=12147 14:18:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:18:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:18:04 Point started: ret=0 14:18:04 point_skyscan result=0 14:18:05 Check angles 14:18:05 SkyScan query 14:18:05 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 14:18:05 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 14:18:05 Check angles 14:18:05 SkyScan query 14:18:06 SkyScan query done: ret=0 az=81.525<-5435 ze=66.51<-7566 Statuses=0009 0008 14:18:06 Msec=750 True Az=81.525 Ze=66.51 Az status=0009 Ze status=0008 14:18:06 Check angles 14:18:06 SkyScan query 14:18:07 SkyScan query done: ret=0 az=99.27<-6618 ze=66.495<-7567 Statuses=0009 0008 14:18:07 Msec=1500 True Az=99.27 Ze=66.495 Az status=0009 Ze status=0008 14:18:07 Check angles 14:18:07 SkyScan query 14:18:07 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 14:18:07 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 14:18:08 Check angles 14:18:08 SkyScan query 14:18:08 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 14:18:08 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 14:18:08 Check angles 14:18:08 SkyScan query 14:18:09 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 14:18:09 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 14:18:09 Check angles 14:18:09 SkyScan query 14:18:10 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:18:10 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:18:10 Message to Master queued w/err=0: serial=12147 error=0 14:18:15 Received message from Master: op=Filter serial=12148 14:18:15 Color wheel filter change from 0 to 0 14:18:15 FLIGetFilterPos err=0 currentPosition=0 14:18:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:15 Filter is already there-color wheel unchanged 14:18:15 Received message from Master: op=Shutter serial=12149 14:18:15 Shutter LASER close 14:18:15 Received message from Camera: op=State serial=12151 14:18:15 GetSingleValue result=40 Value=cccccccc 14:18:15 SkyScan query 14:18:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:18:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:15 Parameters OK 14:18:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:15 Set A/D data flow result=40 14:18:15 Set A/D channel type result=40 14:18:15 Set A/D encoding result=40 14:18:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:15 Set channel filter=0.000000e+000 result=40 14:18:15 Config A/D Result=40 14:18:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:15 Get A/D filter: -9.255963e+061 result=40 14:18:15 Get A/D value=-858993460 result=40 14:18:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:15 Parameters OK 14:18:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:15 Set A/D data flow result=40 14:18:15 Set A/D channel type result=40 14:18:15 Set A/D encoding result=40 14:18:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:15 Set channel filter=0.000000e+000 result=40 14:18:15 Config A/D Result=40 14:18:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:15 Get A/D filter: -9.255963e+061 result=40 14:18:15 Get A/D value=-858993460 result=40 14:18:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:15 Aux= 14:18:15 Message to Camera, serial 12151 queued 14:18:46 Received message from Master: op=PointingHead serial=12158 14:18:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:18:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:18:47 Point started: ret=0 14:18:47 point_skyscan result=0 14:18:47 Check angles 14:18:47 SkyScan query 14:18:48 SkyScan query done: ret=0 az=134.64<-8976 ze=36.24<-9584 Statuses=0009 0009 14:18:48 Msec=0 True Az=134.64 Ze=36.24 Az status=0009 Ze status=0009 14:18:48 Check angles 14:18:48 SkyScan query 14:18:49 SkyScan query done: ret=0 az=117.045<-7803 ze=15.3<-10980 Statuses=0009 0009 14:18:49 Msec=750 True Az=117.045 Ze=15.3 Az status=0009 Ze status=0009 14:18:49 Check angles 14:18:49 SkyScan query 14:18:50 SkyScan query done: ret=0 az=99.375<-6625 ze=-6.09<-12406 Statuses=0009 0009 14:18:50 Msec=1500 True Az=99.375 Ze=-6.09 Az status=0009 Ze status=0009 14:18:50 Check angles 14:18:50 SkyScan query 14:18:50 SkyScan query done: ret=0 az=81.96<-5464 ze=-27.015<-13801 Statuses=0009 0009 14:18:50 Msec=2250 True Az=81.96 Ze=-27.015 Az status=0009 Ze status=0009 14:18:50 Check angles 14:18:50 SkyScan query 14:18:51 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 14:18:51 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 14:18:51 Check angles 14:18:51 SkyScan query 14:18:52 SkyScan query done: ret=0 az=47.04<-3136 ze=-38.535<-14569 Statuses=0009 0008 14:18:52 Msec=3750 True Az=47.04 Ze=-38.535 Az status=0009 Ze status=0008 14:18:52 Check angles 14:18:52 SkyScan query 14:18:53 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 14:18:53 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 14:18:53 Message to Master queued w/err=0: serial=12158 error=0 14:18:58 Received message from Master: op=Filter serial=12159 14:18:58 Color wheel filter change from 0 to 0 14:18:58 FLIGetFilterPos err=0 currentPosition=0 14:18:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:18:58 Filter is already there-color wheel unchanged 14:18:58 Received message from Master: op=Shutter serial=12160 14:18:58 Shutter LASER close 14:18:58 Received message from Camera: op=State serial=12162 14:18:58 GetSingleValue result=40 Value=cccccccc 14:18:58 SkyScan query 14:18:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:18:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:58 Parameters OK 14:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:58 Set A/D data flow result=40 14:18:58 Set A/D channel type result=40 14:18:58 Set A/D encoding result=40 14:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:58 Set channel filter=0.000000e+000 result=40 14:18:58 Config A/D Result=40 14:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:58 Get A/D filter: -9.255963e+061 result=40 14:18:58 Get A/D value=-858993460 result=40 14:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:18:58 Parameters OK 14:18:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:18:58 Set A/D data flow result=40 14:18:58 Set A/D channel type result=40 14:18:58 Set A/D encoding result=40 14:18:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:18:58 Set channel filter=0.000000e+000 result=40 14:18:58 Config A/D Result=40 14:18:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:18:58 Get A/D filter: -9.255963e+061 result=40 14:18:58 Get A/D value=-858993460 result=40 14:18:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:18:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:18:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:18:58 Aux= 14:18:58 Message to Camera, serial 12162 queued 14:19:29 Received message from Master: op=PointingHead serial=12169 14:19:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:19:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:19:29 Point started: ret=0 14:19:29 point_skyscan result=0 14:19:30 Check angles 14:19:30 SkyScan query 14:19:31 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.445<-16563 Statuses=0009 0009 14:19:31 Msec=0 True Az=64.02 Ze=-68.445 Az status=0009 Ze status=0009 14:19:31 Check angles 14:19:31 SkyScan query 14:19:32 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.835<-17989 Statuses=0009 0009 14:19:32 Msec=750 True Az=82.08 Ze=-89.835 Az status=0009 Ze status=0009 14:19:32 Check angles 14:19:32 SkyScan query 14:19:32 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.82<-19388 Statuses=0009 0009 14:19:32 Msec=1500 True Az=99.585 Ze=-110.82 Az status=0009 Ze status=0009 14:19:33 Check angles 14:19:33 SkyScan query 14:19:33 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.745<-20783 Statuses=0009 0009 14:19:33 Msec=2250 True Az=116.985 Ze=-131.745 Az status=0009 Ze status=0009 14:19:33 Check angles 14:19:33 SkyScan query 14:19:34 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 14:19:34 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 14:19:34 Check angles 14:19:34 SkyScan query 14:19:35 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:19:35 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:19:35 Message to Master queued w/err=0: serial=12169 error=0 14:19:40 Received message from Master: op=Filter serial=12170 14:19:40 Color wheel filter change from 0 to 0 14:19:40 FLIGetFilterPos err=0 currentPosition=0 14:19:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:19:40 Filter is already there-color wheel unchanged 14:19:40 Received message from Master: op=Shutter serial=12171 14:19:40 Shutter LASER close 14:19:40 Received message from Camera: op=State serial=12173 14:19:40 GetSingleValue result=40 Value=cccccccc 14:19:40 SkyScan query 14:19:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:19:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:40 Parameters OK 14:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:40 Set A/D data flow result=40 14:19:40 Set A/D channel type result=40 14:19:40 Set A/D encoding result=40 14:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:40 Set channel filter=0.000000e+000 result=40 14:19:40 Config A/D Result=40 14:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:40 Get A/D filter: -9.255963e+061 result=40 14:19:40 Get A/D value=-858993460 result=40 14:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:19:40 Parameters OK 14:19:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:19:40 Set A/D data flow result=40 14:19:40 Set A/D channel type result=40 14:19:40 Set A/D encoding result=40 14:19:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:19:40 Set channel filter=0.000000e+000 result=40 14:19:40 Config A/D Result=40 14:19:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:19:40 Get A/D filter: -9.255963e+061 result=40 14:19:40 Get A/D value=-858993460 result=40 14:19:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:19:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:19:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:19:40 Aux= 14:19:40 Message to Camera, serial 12173 queued 14:20:11 Received message from Master: op=PointingHead serial=12180 14:20:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:20:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:20:12 Point started: ret=0 14:20:12 point_skyscan result=0 14:20:12 Check angles 14:20:12 SkyScan query 14:20:13 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.91<-23394 Statuses=0009 0009 14:20:13 Msec=0 True Az=113.025 Ze=-170.91 Az status=0009 Ze status=0009 14:20:13 Check angles 14:20:13 SkyScan query 14:20:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:20:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:20:14 Message to Master queued w/err=0: serial=12180 error=0 14:20:19 Received message from Master: op=Filter serial=12181 14:20:19 Color wheel filter change from 0 to 0 14:20:19 FLIGetFilterPos err=0 currentPosition=0 14:20:19 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:19 Filter is already there-color wheel unchanged 14:20:19 Received message from Master: op=Shutter serial=12182 14:20:19 Shutter LASER open 14:20:19 Received message from Camera: op=State serial=12184 14:20:19 GetSingleValue result=40 Value=cccccccc 14:20:19 SkyScan query 14:20:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:20:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:20 Parameters OK 14:20:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:20 Set A/D data flow result=40 14:20:20 Set A/D channel type result=40 14:20:20 Set A/D encoding result=40 14:20:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:20 Set channel filter=0.000000e+000 result=40 14:20:20 Config A/D Result=40 14:20:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:20 Get A/D filter: -9.255963e+061 result=40 14:20:20 Get A/D value=-858993460 result=40 14:20:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:20 Parameters OK 14:20:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:20 Set A/D data flow result=40 14:20:20 Set A/D channel type result=40 14:20:20 Set A/D encoding result=40 14:20:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:20 Set channel filter=0.000000e+000 result=40 14:20:20 Config A/D Result=40 14:20:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:20 Get A/D filter: -9.255963e+061 result=40 14:20:20 Get A/D value=-858993460 result=40 14:20:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:20 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:20 Aux= 14:20:20 Message to Camera, serial 12184 queued 14:20:22 Received message from Master: op=Shutter serial=12188 14:20:22 Shutter LASER close 14:20:23 Received message from Master: op=PointingHead serial=12192 14:20:23 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:20:23 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:20:23 Point started: ret=0 14:20:23 point_skyscan result=0 14:20:24 Check angles 14:20:24 SkyScan query 14:20:24 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.31<-21554 Statuses=0009 0009 14:20:24 Msec=0 True Az=135.84 Ze=-143.31 Az status=0009 Ze status=0009 14:20:24 Check angles 14:20:24 SkyScan query 14:20:25 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.37<-20158 Statuses=0009 0009 14:20:25 Msec=750 True Az=153.39 Ze=-122.37 Az status=0009 Ze status=0009 14:20:25 Check angles 14:20:25 SkyScan query 14:20:26 SkyScan query done: ret=0 az=170.775<-11385 ze=-101.43<-18762 Statuses=0009 0009 14:20:26 Msec=1500 True Az=170.775 Ze=-101.43 Az status=0009 Ze status=0009 14:20:26 Check angles 14:20:26 SkyScan query 14:20:27 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.445<-17363 Statuses=0008 0009 14:20:27 Msec=2250 True Az=176.025 Ze=-80.445 Az status=0008 Ze status=0009 14:20:27 Check angles 14:20:27 SkyScan query 14:20:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.49<-15966 Statuses=0008 0009 14:20:27 Msec=3000 True Az=176.01 Ze=-59.49 Az status=0008 Ze status=0009 14:20:27 Check angles 14:20:27 SkyScan query 14:20:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:20:28 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:20:28 Message to Master queued w/err=0: serial=12192 error=0 14:20:33 Received message from Master: op=Filter serial=12193 14:20:33 Color wheel filter change from 0 to 0 14:20:33 FLIGetFilterPos err=0 currentPosition=0 14:20:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:20:33 Filter is already there-color wheel unchanged 14:20:33 Received message from Master: op=Shutter serial=12194 14:20:33 Shutter LASER close 14:20:33 Received message from Camera: op=State serial=12196 14:20:33 GetSingleValue result=40 Value=cccccccc 14:20:33 SkyScan query 14:20:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:20:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:34 Parameters OK 14:20:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:34 Set A/D data flow result=40 [UTC 2018-12-4 14:20:34] 14:20:34 Set A/D channel type result=40 14:20:34 Set A/D encoding result=40 14:20:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:34 Set channel filter=0.000000e+000 result=40 14:20:34 Config A/D Result=40 14:20:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:34 Get A/D filter: -9.255963e+061 result=40 14:20:34 Get A/D value=-858993460 result=40 14:20:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:20:34 Parameters OK 14:20:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:20:34 Set A/D data flow result=40 14:20:34 Set A/D channel type result=40 14:20:34 Set A/D encoding result=40 14:20:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:20:34 Set channel filter=0.000000e+000 result=40 14:20:34 Config A/D Result=40 14:20:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:20:34 Get A/D filter: -9.255963e+061 result=40 14:20:34 Get A/D value=-858993460 result=40 14:20:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:20:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:20:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:20:34 Aux= 14:20:34 Message to Camera, serial 12196 queued 14:21:05 Received message from Master: op=PointingHead serial=12203 14:21:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:21:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:21:05 Point started: ret=0 14:21:05 point_skyscan result=0 14:21:06 Check angles 14:21:06 SkyScan query 14:21:06 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.69<-13446 Statuses=0009 0009 14:21:06 Msec=0 True Az=152.925 Ze=-21.69 Az status=0009 Ze status=0009 14:21:07 Check angles 14:21:07 SkyScan query 14:21:07 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.72<-12048 Statuses=0009 0009 14:21:07 Msec=750 True Az=135.435 Ze=-0.72 Az status=0009 Ze status=0009 14:21:07 Check angles 14:21:07 SkyScan query 14:21:08 SkyScan query done: ret=0 az=117.975<-7865 ze=20.235<-10651 Statuses=0009 0009 14:21:08 Msec=1500 True Az=117.975 Ze=20.235 Az status=0009 Ze status=0009 14:21:08 Check angles 14:21:08 SkyScan query 14:21:09 SkyScan query done: ret=0 az=100.44<-6696 ze=41.19<-9254 Statuses=0009 0009 14:21:09 Msec=2250 True Az=100.44 Ze=41.19 Az status=0009 Ze status=0009 14:21:09 Check angles 14:21:09 SkyScan query 14:21:09 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 14:21:09 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 14:21:10 Check angles 14:21:10 SkyScan query 14:21:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:21:10 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 14:21:10 Message to Master queued w/err=0: serial=12203 error=0 14:21:15 Received message from Master: op=Filter serial=12204 14:21:15 Color wheel filter change from 0 to 0 14:21:15 FLIGetFilterPos err=0 currentPosition=0 14:21:15 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:15 Filter is already there-color wheel unchanged 14:21:15 Received message from Master: op=Shutter serial=12205 14:21:15 Shutter LASER close 14:21:15 Received message from Camera: op=State serial=12207 14:21:15 GetSingleValue result=40 Value=cccccccc 14:21:15 SkyScan query 14:21:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:21:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:16 Parameters OK 14:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:16 Set A/D data flow result=40 14:21:16 Set A/D channel type result=40 14:21:16 Set A/D encoding result=40 14:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:16 Set channel filter=0.000000e+000 result=40 14:21:16 Config A/D Result=40 14:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:16 Get A/D filter: -9.255963e+061 result=40 14:21:16 Get A/D value=-858993460 result=40 14:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:16 Parameters OK 14:21:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:16 Set A/D data flow result=40 14:21:16 Set A/D channel type result=40 14:21:16 Set A/D encoding result=40 14:21:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:16 Set channel filter=0.000000e+000 result=40 14:21:16 Config A/D Result=40 14:21:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:16 Get A/D filter: -9.255963e+061 result=40 14:21:16 Get A/D value=-858993460 result=40 14:21:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:16 Aux= 14:21:16 Message to Camera, serial 12207 queued 14:21:47 Received message from Master: op=PointingHead serial=12214 14:21:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:21:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:21:47 Point started: ret=0 14:21:47 point_skyscan result=0 14:21:48 Check angles 14:21:48 SkyScan query 14:21:49 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 14:21:49 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 14:21:49 Received message from Master: op=Identify serial=12215 14:21:49 Check angles 14:21:49 SkyScan query 14:21:49 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 14:21:49 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 14:21:49 Check angles 14:21:49 SkyScan query 14:21:50 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 14:21:50 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 14:21:50 Check angles 14:21:50 SkyScan query 14:21:51 SkyScan query done: ret=0 az=161.76<-10784 ze=38.505<-9433 Statuses=0009 0008 14:21:51 Msec=2250 True Az=161.76 Ze=38.505 Az status=0009 Ze status=0008 14:21:51 Check angles 14:21:51 SkyScan query 14:21:52 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:21:52 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:21:52 Check angles 14:21:52 SkyScan query 14:21:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:21:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:21:52 Message to Master queued w/err=0: serial=12214 error=0 14:21:57 Received message from Master: op=Filter serial=12218 14:21:57 Color wheel filter change from 0 to 0 14:21:57 FLIGetFilterPos err=0 currentPosition=0 14:21:57 FLIGetStepsRemaining err=0 RemainingSteps=0 14:21:57 Filter is already there-color wheel unchanged 14:21:57 Received message from Master: op=Shutter serial=12219 14:21:57 Shutter LASER close 14:21:58 Received message from Camera: op=State serial=12221 14:21:58 GetSingleValue result=40 Value=cccccccc 14:21:58 SkyScan query 14:21:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:21:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:58 Parameters OK 14:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:58 Set A/D data flow result=40 14:21:58 Set A/D channel type result=40 14:21:58 Set A/D encoding result=40 14:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:58 Set channel filter=0.000000e+000 result=40 14:21:58 Config A/D Result=40 14:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:58 Get A/D filter: -9.255963e+061 result=40 14:21:58 Get A/D value=-858993460 result=40 14:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:21:58 Parameters OK 14:21:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:21:58 Set A/D data flow result=40 14:21:58 Set A/D channel type result=40 14:21:58 Set A/D encoding result=40 14:21:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:21:58 Set channel filter=0.000000e+000 result=40 14:21:58 Config A/D Result=40 14:21:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:21:58 Get A/D filter: -9.255963e+061 result=40 14:21:58 Get A/D value=-858993460 result=40 14:21:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:21:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:21:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:21:58 Aux= 14:21:58 Message to Camera, serial 12221 queued 14:22:29 Received message from Master: op=PointingHead serial=12228 14:22:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:22:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:22:29 Point started: ret=0 14:22:29 point_skyscan result=0 14:22:30 Check angles 14:22:30 SkyScan query 14:22:31 SkyScan query done: ret=0 az=152.505<-10167 ze=8.205<-11453 Statuses=0009 0009 14:22:31 Msec=0 True Az=152.505 Ze=8.205 Az status=0009 Ze status=0009 14:22:31 Check angles 14:22:31 SkyScan query 14:22:31 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.765<-12851 Statuses=0009 0009 14:22:31 Msec=750 True Az=135.045 Ze=-12.765 Az status=0009 Ze status=0009 14:22:32 Check angles 14:22:32 SkyScan query 14:22:32 SkyScan query done: ret=0 az=117.54<-7836 ze=-33.69<-14246 Statuses=0009 0009 14:22:32 Msec=1500 True Az=117.54 Ze=-33.69 Az status=0009 Ze status=0009 14:22:32 Check angles 14:22:32 SkyScan query 14:22:33 SkyScan query done: ret=0 az=99.69<-6646 ze=-51.555<-15437 Statuses=0009 0009 14:22:33 Msec=2250 True Az=99.69 Ze=-51.555 Az status=0009 Ze status=0009 14:22:33 Check angles 14:22:33 SkyScan query 14:22:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 14:22:34 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 14:22:34 Check angles 14:22:34 SkyScan query 14:22:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:22:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:22:34 Message to Master queued w/err=0: serial=12228 error=0 14:22:39 Received message from Master: op=Filter serial=12229 14:22:39 Color wheel filter change from 0 to 0 14:22:39 FLIGetFilterPos err=0 currentPosition=0 14:22:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:22:39 Filter is already there-color wheel unchanged 14:22:40 Received message from Master: op=Shutter serial=12230 14:22:40 Shutter LASER close 14:22:40 Received message from Camera: op=State serial=12232 14:22:40 GetSingleValue result=40 Value=cccccccc 14:22:40 SkyScan query 14:22:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:22:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:40 Parameters OK 14:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:40 Set A/D data flow result=40 14:22:40 Set A/D channel type result=40 14:22:40 Set A/D encoding result=40 14:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:40 Set channel filter=0.000000e+000 result=40 14:22:40 Config A/D Result=40 14:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:40 Get A/D filter: -9.255963e+061 result=40 14:22:40 Get A/D value=-858993460 result=40 14:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:22:40 Parameters OK 14:22:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:22:40 Set A/D data flow result=40 14:22:40 Set A/D channel type result=40 14:22:40 Set A/D encoding result=40 14:22:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:22:40 Set channel filter=0.000000e+000 result=40 14:22:40 Config A/D Result=40 14:22:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:22:40 Get A/D filter: -9.255963e+061 result=40 14:22:40 Get A/D value=-858993460 result=40 14:22:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:22:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:22:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:22:40 Aux= 14:22:40 Message to Camera, serial 12232 queued 14:23:11 Received message from Master: op=PointingHead serial=12239 14:23:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:23:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:23:11 Point started: ret=0 14:23:11 point_skyscan result=0 14:23:12 Check angles 14:23:12 SkyScan query 14:23:13 SkyScan query done: ret=0 az=108.765<-7251 ze=-81.06<-17404 Statuses=0009 0009 14:23:13 Msec=0 True Az=108.765 Ze=-81.06 Az status=0009 Ze status=0009 14:23:13 Check angles 14:23:13 SkyScan query 14:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.03<-18802 Statuses=0008 0009 14:23:13 Msec=750 True Az=112.995 Ze=-102.03 Az status=0008 Ze status=0009 14:23:14 Check angles 14:23:14 SkyScan query 14:23:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-122.985<-20199 Statuses=0008 0009 14:23:14 Msec=1500 True Az=112.995 Ze=-122.985 Az status=0008 Ze status=0009 14:23:14 Check angles 14:23:14 SkyScan query 14:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 14:23:15 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 14:23:15 Check angles 14:23:15 SkyScan query 14:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 14:23:16 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 14:23:16 Check angles 14:23:16 SkyScan query 14:23:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:23:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:23:16 Message to Master queued w/err=0: serial=12239 error=0 14:23:21 Received message from Master: op=Filter serial=12240 14:23:21 Color wheel filter change from 0 to 0 14:23:21 FLIGetFilterPos err=0 currentPosition=0 14:23:21 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:21 Filter is already there-color wheel unchanged 14:23:22 Received message from Master: op=Shutter serial=12241 14:23:22 Shutter LASER open 14:23:22 Received message from Camera: op=State serial=12243 14:23:22 GetSingleValue result=40 Value=cccccccc 14:23:22 SkyScan query 14:23:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:23:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:22 Parameters OK 14:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:22 Set A/D data flow result=40 14:23:22 Set A/D channel type result=40 14:23:22 Set A/D encoding result=40 14:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:22 Set channel filter=0.000000e+000 result=40 14:23:22 Config A/D Result=40 14:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:22 Get A/D filter: -9.255963e+061 result=40 14:23:22 Get A/D value=-858993460 result=40 14:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:22 Parameters OK 14:23:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:22 Set A/D data flow result=40 14:23:22 Set A/D channel type result=40 14:23:22 Set A/D encoding result=40 14:23:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:22 Set channel filter=0.000000e+000 result=40 14:23:22 Config A/D Result=40 14:23:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:22 Get A/D filter: -9.255963e+061 result=40 14:23:22 Get A/D value=-858993460 result=40 14:23:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:22 Aux= 14:23:22 Message to Camera, serial 12243 queued 14:23:25 Received message from Master: op=Shutter serial=12247 14:23:25 Shutter LASER close 14:23:25 Received message from Master: op=PointingHead serial=12251 14:23:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:23:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:23:26 Point started: ret=0 14:23:26 point_skyscan result=0 14:23:26 Check angles 14:23:26 SkyScan query 14:23:27 SkyScan query done: ret=0 az=89.94<-5996 ze=157.35<-1510 Statuses=0009 0009 14:23:27 Msec=0 True Az=89.94 Ze=157.35 Az status=0009 Ze status=0009 14:23:27 Check angles 14:23:27 SkyScan query 14:23:28 SkyScan query done: ret=0 az=72.165<-4811 ze=135.945<-2937 Statuses=0009 0009 14:23:28 Msec=750 True Az=72.165 Ze=135.945 Az status=0009 Ze status=0009 14:23:28 Check angles 14:23:28 SkyScan query 14:23:29 SkyScan query done: ret=0 az=54.81<-3654 ze=115.005<-4333 Statuses=0009 0009 14:23:29 Msec=1500 True Az=54.81 Ze=115.005 Az status=0009 Ze status=0009 14:23:29 Check angles 14:23:29 SkyScan query 14:23:29 SkyScan query done: ret=0 az=40.86<-2724 ze=94.035<-5731 Statuses=0009 0009 14:23:29 Msec=2250 True Az=40.86 Ze=94.035 Az status=0009 Ze status=0009 14:23:29 Check angles 14:23:29 SkyScan query 14:23:30 SkyScan query done: ret=0 az=40.995<-2733 ze=73.08<-7128 Statuses=0008 0009 14:23:30 Msec=3000 True Az=40.995 Ze=73.08 Az status=0008 Ze status=0009 14:23:30 Check angles 14:23:30 SkyScan query 14:23:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 14:23:31 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 14:23:31 Check angles 14:23:31 SkyScan query 14:23:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:23:32 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:23:32 Message to Master queued w/err=0: serial=12251 error=0 14:23:37 Received message from Master: op=Filter serial=12252 14:23:37 Color wheel filter change from 0 to 0 14:23:37 FLIGetFilterPos err=0 currentPosition=0 14:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 14:23:37 Filter is already there-color wheel unchanged 14:23:37 Received message from Master: op=Shutter serial=12253 14:23:37 Shutter LASER close 14:23:37 Received message from Camera: op=State serial=12255 14:23:37 GetSingleValue result=40 Value=cccccccc 14:23:37 SkyScan query 14:23:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:23:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:37 Parameters OK 14:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:37 Set A/D data flow result=40 14:23:37 Set A/D channel type result=40 14:23:37 Set A/D encoding result=40 14:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:37 Set channel filter=0.000000e+000 result=40 14:23:37 Config A/D Result=40 14:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:37 Get A/D filter: -9.255963e+061 result=40 14:23:37 Get A/D value=-858993460 result=40 14:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:23:37 Parameters OK 14:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:23:37 Set A/D data flow result=40 14:23:37 Set A/D channel type result=40 14:23:37 Set A/D encoding result=40 14:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:23:37 Set channel filter=0.000000e+000 result=40 14:23:37 Config A/D Result=40 14:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:23:37 Get A/D filter: -9.255963e+061 result=40 14:23:37 Get A/D value=-858993460 result=40 14:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:23:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:23:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:23:37 Aux= 14:23:37 Message to Camera, serial 12255 queued 14:24:08 Received message from Master: op=PointingHead serial=12262 14:24:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:24:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:24:09 Point started: ret=0 14:24:09 point_skyscan result=0 14:24:09 Check angles 14:24:09 SkyScan query 14:24:10 SkyScan query done: ret=0 az=64.185<-4279 ze=66.555<-7563 Statuses=0009 0008 14:24:10 Msec=0 True Az=64.185 Ze=66.555 Az status=0009 Ze status=0008 14:24:10 Check angles 14:24:10 SkyScan query 14:24:11 SkyScan query done: ret=0 az=81.765<-5451 ze=66.495<-7567 Statuses=0009 0008 14:24:11 Msec=750 True Az=81.765 Ze=66.495 Az status=0009 Ze status=0008 14:24:11 Check angles 14:24:11 SkyScan query 14:24:11 SkyScan query done: ret=0 az=99.345<-6623 ze=66.495<-7567 Statuses=0009 0008 14:24:11 Msec=1500 True Az=99.345 Ze=66.495 Az status=0009 Ze status=0008 14:24:12 Check angles 14:24:12 SkyScan query 14:24:12 SkyScan query done: ret=0 az=117.06<-7804 ze=66.495<-7567 Statuses=0009 0008 14:24:12 Msec=2250 True Az=117.06 Ze=66.495 Az status=0009 Ze status=0008 14:24:12 Check angles 14:24:12 SkyScan query 14:24:13 SkyScan query done: ret=0 az=134.91<-8994 ze=66.495<-7567 Statuses=0009 0008 14:24:13 Msec=3000 True Az=134.91 Ze=66.495 Az status=0009 Ze status=0008 14:24:13 Check angles 14:24:13 SkyScan query 14:24:14 SkyScan query done: ret=0 az=152.205<-10147 ze=66.495<-7567 Statuses=0009 0008 14:24:14 Msec=3750 True Az=152.205 Ze=66.495 Az status=0009 Ze status=0008 14:24:14 Check angles 14:24:14 SkyScan query 14:24:15 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:24:15 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:24:15 Message to Master queued w/err=0: serial=12262 error=0 14:24:20 Received message from Master: op=Filter serial=12263 14:24:20 Color wheel filter change from 0 to 0 14:24:20 FLIGetFilterPos err=0 currentPosition=0 14:24:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:24:20 Filter is already there-color wheel unchanged 14:24:20 Received message from Master: op=Shutter serial=12264 14:24:20 Shutter LASER close 14:24:20 Received message from Camera: op=State serial=12266 14:24:20 GetSingleValue result=40 Value=cccccccc 14:24:20 SkyScan query 14:24:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:24:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:20 Parameters OK 14:24:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:20 Set A/D data flow result=40 14:24:20 Set A/D channel type result=40 14:24:20 Set A/D encoding result=40 14:24:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:20 Set channel filter=0.000000e+000 result=40 14:24:20 Config A/D Result=40 14:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:20 Get A/D filter: -9.255963e+061 result=40 14:24:20 Get A/D value=-858993460 result=40 14:24:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:24:20 Parameters OK 14:24:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:24:20 Set A/D data flow result=40 14:24:20 Set A/D channel type result=40 14:24:20 Set A/D encoding result=40 14:24:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:24:20 Set channel filter=0.000000e+000 result=40 14:24:20 Config A/D Result=40 14:24:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:24:20 Get A/D filter: -9.255963e+061 result=40 14:24:20 Get A/D value=-858993460 result=40 14:24:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:24:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:24:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:24:20 Aux= 14:24:20 Message to Camera, serial 12266 queued 14:24:51 Received message from Master: op=PointingHead serial=12273 14:24:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:24:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:24:51 Point started: ret=0 14:24:51 point_skyscan result=0 14:24:52 Check angles 14:24:52 SkyScan query 14:24:53 SkyScan query done: ret=0 az=135.105<-9007 ze=36.795<-9547 Statuses=0009 0009 14:24:53 Msec=0 True Az=135.105 Ze=36.795 Az status=0009 Ze status=0009 14:24:53 Check angles 14:24:53 SkyScan query 14:24:54 SkyScan query done: ret=0 az=117.54<-7836 ze=15.825<-10945 Statuses=0009 0009 14:24:54 Msec=750 True Az=117.54 Ze=15.825 Az status=0009 Ze status=0009 14:24:54 Check angles 14:24:54 SkyScan query 14:24:54 SkyScan query done: ret=0 az=99.81<-6654 ze=-5.64<-12376 Statuses=0009 0009 14:24:54 Msec=1500 True Az=99.81 Ze=-5.64 Az status=0009 Ze status=0009 14:24:55 Check angles 14:24:55 SkyScan query 14:24:55 SkyScan query done: ret=0 az=82.305<-5487 ze=-26.52<-13768 Statuses=0009 0009 14:24:55 Msec=2250 True Az=82.305 Ze=-26.52 Az status=0009 Ze status=0009 14:24:55 Check angles 14:24:55 SkyScan query 14:24:56 SkyScan query done: ret=0 az=64.47<-4298 ze=-38.565<-14571 Statuses=0009 0008 14:24:56 Msec=3000 True Az=64.47 Ze=-38.565 Az status=0009 Ze status=0008 14:24:56 Check angles 14:24:56 SkyScan query 14:24:57 SkyScan query done: ret=0 az=47.025<-3135 ze=-38.535<-14569 Statuses=0009 0008 14:24:57 Msec=3750 True Az=47.025 Ze=-38.535 Az status=0009 Ze status=0008 14:24:57 Check angles 14:24:57 SkyScan query 14:24:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:24:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:24:57 Message to Master queued w/err=0: serial=12273 error=0 14:25:02 Received message from Master: op=Filter serial=12274 14:25:02 Color wheel filter change from 0 to 0 14:25:02 FLIGetFilterPos err=0 currentPosition=0 14:25:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:02 Filter is already there-color wheel unchanged 14:25:03 Received message from Master: op=Shutter serial=12275 14:25:03 Shutter LASER close 14:25:03 Received message from Camera: op=State serial=12277 14:25:03 GetSingleValue result=40 Value=cccccccc 14:25:03 SkyScan query 14:25:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:25:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:03 Parameters OK 14:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:03 Set A/D data flow result=40 14:25:03 Set A/D channel type result=40 14:25:03 Set A/D encoding result=40 14:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:03 Set channel filter=0.000000e+000 result=40 14:25:03 Config A/D Result=40 14:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:03 Get A/D filter: -9.255963e+061 result=40 14:25:03 Get A/D value=-858993460 result=40 14:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:03 Parameters OK 14:25:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:03 Set A/D data flow result=40 14:25:03 Set A/D channel type result=40 14:25:03 Set A/D encoding result=40 14:25:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:03 Set channel filter=0.000000e+000 result=40 14:25:03 Config A/D Result=40 14:25:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:03 Get A/D filter: -9.255963e+061 result=40 14:25:03 Get A/D value=-858993460 result=40 14:25:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:03 Aux= 14:25:03 Message to Camera, serial 12277 queued 14:25:34 Received message from Master: op=PointingHead serial=12284 14:25:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:25:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:25:34 Point started: ret=0 14:25:34 point_skyscan result=0 14:25:35 Check angles 14:25:35 SkyScan query 14:25:36 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.13<-16542 Statuses=0009 0009 14:25:36 Msec=0 True Az=63.81 Ze=-68.13 Az status=0009 Ze status=0009 14:25:36 Check angles 14:25:36 SkyScan query 14:25:36 SkyScan query done: ret=0 az=81.285<-5419 ze=-89.085<-17939 Statuses=0009 0009 14:25:36 Msec=750 True Az=81.285 Ze=-89.085 Az status=0009 Ze status=0009 14:25:37 Check angles 14:25:37 SkyScan query 14:25:37 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.49<-19366 Statuses=0009 0009 14:25:37 Msec=1500 True Az=99.285 Ze=-110.49 Az status=0009 Ze status=0009 14:25:37 Check angles 14:25:37 SkyScan query 14:25:38 SkyScan query done: ret=0 az=116.82<-7788 ze=-131.415<-20761 Statuses=0009 0009 14:25:38 Msec=2250 True Az=116.82 Ze=-131.415 Az status=0009 Ze status=0009 14:25:38 Check angles 14:25:38 SkyScan query 14:25:39 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 14:25:39 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 14:25:39 Check angles 14:25:39 SkyScan query 14:25:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:25:39 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:25:39 Message to Master queued w/err=0: serial=12284 error=0 14:25:44 Received message from Master: op=Filter serial=12285 14:25:44 Color wheel filter change from 0 to 0 14:25:44 FLIGetFilterPos err=0 currentPosition=0 14:25:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:25:44 Filter is already there-color wheel unchanged 14:25:45 Received message from Master: op=Shutter serial=12286 14:25:45 Shutter LASER close 14:25:45 Received message from Camera: op=State serial=12288 14:25:45 GetSingleValue result=40 Value=cccccccc 14:25:45 SkyScan query 14:25:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:25:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:45 Parameters OK 14:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:45 Set A/D data flow result=40 14:25:45 Set A/D channel type result=40 14:25:45 Set A/D encoding result=40 14:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:45 Set channel filter=0.000000e+000 result=40 14:25:45 Config A/D Result=40 14:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:45 Get A/D filter: -9.255963e+061 result=40 14:25:45 Get A/D value=-858993460 result=40 14:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:25:45 Parameters OK 14:25:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:25:45 Set A/D data flow result=40 14:25:45 Set A/D channel type result=40 14:25:45 Set A/D encoding result=40 14:25:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:25:45 Set channel filter=0.000000e+000 result=40 14:25:45 Config A/D Result=40 14:25:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:25:45 Get A/D filter: -9.255963e+061 result=40 14:25:45 Get A/D value=-858993460 result=40 14:25:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:25:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:25:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:25:45 Aux= 14:25:45 Message to Camera, serial 12288 queued 14:26:16 Received message from Master: op=PointingHead serial=12295 14:26:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:26:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:26:16 Point started: ret=0 14:26:16 point_skyscan result=0 14:26:17 Check angles 14:26:17 SkyScan query 14:26:18 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.51<-23434 Statuses=0009 0009 14:26:18 Msec=0 True Az=113.01 Ze=-171.51 Az status=0009 Ze status=0009 14:26:18 Check angles 14:26:18 SkyScan query 14:26:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:26:19 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:26:19 Message to Master queued w/err=0: serial=12295 error=0 14:26:24 Received message from Master: op=Filter serial=12296 14:26:24 Color wheel filter change from 0 to 0 14:26:24 FLIGetFilterPos err=0 currentPosition=0 14:26:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:24 Filter is already there-color wheel unchanged 14:26:24 Received message from Master: op=Shutter serial=12297 14:26:24 Shutter LASER open 14:26:24 Received message from Camera: op=State serial=12299 14:26:24 GetSingleValue result=40 Value=cccccccc 14:26:24 SkyScan query 14:26:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:26:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:24 Parameters OK 14:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:24 Set A/D data flow result=40 14:26:24 Set A/D channel type result=40 14:26:24 Set A/D encoding result=40 14:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:24 Set channel filter=0.000000e+000 result=40 14:26:24 Config A/D Result=40 14:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:24 Get A/D filter: -9.255963e+061 result=40 14:26:24 Get A/D value=-858993460 result=40 14:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:24 Parameters OK 14:26:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:24 Set A/D data flow result=40 14:26:24 Set A/D channel type result=40 14:26:24 Set A/D encoding result=40 14:26:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:24 Set channel filter=0.000000e+000 result=40 14:26:24 Config A/D Result=40 14:26:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:24 Get A/D filter: -9.255963e+061 result=40 14:26:24 Get A/D value=-858993460 result=40 14:26:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:24 Aux= 14:26:24 Message to Camera, serial 12299 queued 14:26:27 Received message from Master: op=Shutter serial=12303 14:26:27 Shutter LASER close 14:26:28 Received message from Master: op=PointingHead serial=12307 14:26:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:26:28 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:26:28 Point started: ret=0 14:26:28 point_skyscan result=0 14:26:29 Check angles 14:26:29 SkyScan query 14:26:29 SkyScan query done: ret=0 az=136.17<-9078 ze=-143.01<-21534 Statuses=0009 0009 14:26:29 Msec=0 True Az=136.17 Ze=-143.01 Az status=0009 Ze status=0009 14:26:29 Check angles 14:26:29 SkyScan query 14:26:30 SkyScan query done: ret=0 az=153.645<-10243 ze=-122.04<-20136 Statuses=0009 0009 14:26:30 Msec=750 True Az=153.645 Ze=-122.04 Az status=0009 Ze status=0009 14:26:30 Check angles 14:26:30 SkyScan query 14:26:31 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.145<-18743 Statuses=0009 0009 14:26:31 Msec=1500 True Az=171.18 Ze=-101.145 Az status=0009 Ze status=0009 14:26:31 Check angles 14:26:31 SkyScan query 14:26:32 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.16<-17344 Statuses=0008 0009 14:26:32 Msec=2250 True Az=176.025 Ze=-80.16 Az status=0008 Ze status=0009 14:26:32 Check angles 14:26:32 SkyScan query 14:26:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.205<-15947 Statuses=0008 0009 14:26:32 Msec=3000 True Az=175.995 Ze=-59.205 Az status=0008 Ze status=0009 14:26:32 Check angles 14:26:32 SkyScan query 14:26:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:26:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:26:33 Message to Master queued w/err=0: serial=12307 error=0 14:26:38 Received message from Master: op=Filter serial=12308 14:26:38 Color wheel filter change from 0 to 0 14:26:38 FLIGetFilterPos err=0 currentPosition=0 14:26:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:26:38 Filter is already there-color wheel unchanged 14:26:38 Received message from Master: op=Shutter serial=12309 14:26:38 Shutter LASER close 14:26:38 Received message from Camera: op=State serial=12311 14:26:38 GetSingleValue result=40 Value=cccccccc 14:26:38 SkyScan query 14:26:39 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:26:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:39 Parameters OK 14:26:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:39 Set A/D data flow result=40 14:26:39 Set A/D channel type result=40 14:26:39 Set A/D encoding result=40 14:26:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:39 Set channel filter=0.000000e+000 result=40 14:26:39 Config A/D Result=40 14:26:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:39 Get A/D filter: -9.255963e+061 result=40 14:26:39 Get A/D value=-858993460 result=40 14:26:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:26:39 Parameters OK 14:26:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:26:39 Set A/D data flow result=40 14:26:39 Set A/D channel type result=40 14:26:39 Set A/D encoding result=40 14:26:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:26:39 Set channel filter=0.000000e+000 result=40 14:26:39 Config A/D Result=40 14:26:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:26:39 Get A/D filter: -9.255963e+061 result=40 14:26:39 Get A/D value=-858993460 result=40 14:26:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:26:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:26:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:26:39 Aux= 14:26:39 Message to Camera, serial 12311 queued 14:27:10 Received message from Master: op=PointingHead serial=12318 14:27:10 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:27:10 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:27:10 Point started: ret=0 14:27:10 point_skyscan result=0 14:27:11 Check angles 14:27:11 SkyScan query 14:27:11 SkyScan query done: ret=0 az=153.195<-10213 ze=-21.945<-13463 Statuses=0009 0009 14:27:11 Msec=0 True Az=153.195 Ze=-21.945 Az status=0009 Ze status=0009 14:27:12 Check angles 14:27:12 SkyScan query 14:27:12 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.975<-12065 Statuses=0009 0009 14:27:12 Msec=750 True Az=135.735 Ze=-0.975 Az status=0009 Ze status=0009 14:27:12 Check angles 14:27:12 SkyScan query 14:27:13 SkyScan query done: ret=0 az=118.17<-7878 ze=19.995<-10667 Statuses=0009 0009 14:27:13 Msec=1500 True Az=118.17 Ze=19.995 Az status=0009 Ze status=0009 14:27:13 Check angles 14:27:13 SkyScan query 14:27:14 SkyScan query done: ret=0 az=100.8<-6720 ze=40.935<-9271 Statuses=0009 0009 14:27:14 Msec=2250 True Az=100.8 Ze=40.935 Az status=0009 Ze status=0009 14:27:14 Check angles 14:27:14 SkyScan query 14:27:14 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:27:14 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:27:15 Check angles 14:27:15 SkyScan query 14:27:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:27:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:27:15 Message to Master queued w/err=0: serial=12318 error=0 14:27:20 Received message from Master: op=Filter serial=12319 14:27:20 Color wheel filter change from 0 to 0 14:27:20 FLIGetFilterPos err=0 currentPosition=0 14:27:20 FLIGetStepsRemaining err=0 RemainingSteps=0 14:27:20 Filter is already there-color wheel unchanged 14:27:20 Received message from Master: op=Shutter serial=12320 14:27:20 Shutter LASER close 14:27:20 Received message from Camera: op=State serial=12322 14:27:20 GetSingleValue result=40 Value=cccccccc 14:27:20 SkyScan query 14:27:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:27:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:21 Parameters OK 14:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:21 Set A/D data flow result=40 14:27:21 Set A/D channel type result=40 14:27:21 Set A/D encoding result=40 14:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:21 Set channel filter=0.000000e+000 result=40 14:27:21 Config A/D Result=40 14:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:21 Get A/D filter: -9.255963e+061 result=40 14:27:21 Get A/D value=-858993460 result=40 14:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:27:21 Parameters OK 14:27:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:27:21 Set A/D data flow result=40 14:27:21 Set A/D channel type result=40 14:27:21 Set A/D encoding result=40 14:27:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:27:21 Set channel filter=0.000000e+000 result=40 14:27:21 Config A/D Result=40 14:27:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:27:21 Get A/D filter: -9.255963e+061 result=40 14:27:21 Get A/D value=-858993460 result=40 14:27:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:27:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:27:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:27:21 Aux= 14:27:21 Message to Camera, serial 12322 queued 14:27:52 Received message from Master: op=PointingHead serial=12329 14:27:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:27:52 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:27:52 Point started: ret=0 14:27:52 point_skyscan result=0 14:27:53 Check angles 14:27:53 SkyScan query 14:27:53 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 14:27:53 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 14:27:54 Check angles 14:27:54 SkyScan query 14:27:54 SkyScan query done: ret=0 az=126.255<-8417 ze=38.505<-9433 Statuses=0009 0008 14:27:54 Msec=750 True Az=126.255 Ze=38.505 Az status=0009 Ze status=0008 14:27:54 Check angles 14:27:54 SkyScan query 14:27:55 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 14:27:55 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 14:27:55 Check angles 14:27:55 SkyScan query 14:27:56 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 14:27:56 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 14:27:56 Check angles 14:27:56 SkyScan query 14:27:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:27:56 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:27:57 Check angles 14:27:57 SkyScan query 14:27:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:27:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:27:57 Message to Master queued w/err=0: serial=12329 error=0 14:28:02 Received message from Master: op=Filter serial=12330 14:28:02 Color wheel filter change from 0 to 0 14:28:02 FLIGetFilterPos err=0 currentPosition=0 14:28:02 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:02 Filter is already there-color wheel unchanged 14:28:02 Received message from Master: op=Shutter serial=12331 14:28:02 Shutter LASER close 14:28:02 Received message from Camera: op=State serial=12333 14:28:02 GetSingleValue result=40 Value=cccccccc 14:28:02 SkyScan query 14:28:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:28:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:03 Parameters OK 14:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:03 Set A/D data flow result=40 14:28:03 Set A/D channel type result=40 14:28:03 Set A/D encoding result=40 14:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:03 Set channel filter=0.000000e+000 result=40 14:28:03 Config A/D Result=40 14:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:03 Get A/D filter: -9.255963e+061 result=40 14:28:03 Get A/D value=-858993460 result=40 14:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:03 Parameters OK 14:28:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:03 Set A/D data flow result=40 14:28:03 Set A/D channel type result=40 14:28:03 Set A/D encoding result=40 14:28:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:03 Set channel filter=0.000000e+000 result=40 14:28:03 Config A/D Result=40 14:28:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:03 Get A/D filter: -9.255963e+061 result=40 14:28:03 Get A/D value=-858993460 result=40 14:28:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:03 Aux= 14:28:03 Message to Camera, serial 12333 queued 14:28:34 Received message from Master: op=PointingHead serial=12340 14:28:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:28:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:28:34 Point started: ret=0 14:28:34 point_skyscan result=0 14:28:35 Check angles 14:28:35 SkyScan query 14:28:36 SkyScan query done: ret=0 az=152.775<-10185 ze=8.385<-11441 Statuses=0009 0009 14:28:36 Msec=0 True Az=152.775 Ze=8.385 Az status=0009 Ze status=0009 14:28:36 Check angles 14:28:36 SkyScan query 14:28:36 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.675<-12845 Statuses=0009 0009 14:28:36 Msec=750 True Az=135.3 Ze=-12.675 Az status=0009 Ze status=0009 14:28:37 Check angles 14:28:37 SkyScan query 14:28:37 SkyScan query done: ret=0 az=117.39<-7826 ze=-33.945<-14263 Statuses=0009 0009 14:28:37 Msec=1500 True Az=117.39 Ze=-33.945 Az status=0009 Ze status=0009 14:28:37 Check angles 14:28:37 SkyScan query 14:28:38 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.555<-15437 Statuses=0009 0009 14:28:38 Msec=2250 True Az=100.02 Ze=-51.555 Az status=0009 Ze status=0009 14:28:38 Check angles 14:28:38 SkyScan query 14:28:39 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:28:39 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:28:39 Check angles 14:28:39 SkyScan query 14:28:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:28:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:28:39 Message to Master queued w/err=0: serial=12340 error=0 14:28:44 Received message from Master: op=Filter serial=12341 14:28:44 Color wheel filter change from 0 to 0 14:28:44 FLIGetFilterPos err=0 currentPosition=0 14:28:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:28:44 Filter is already there-color wheel unchanged 14:28:45 Received message from Master: op=Shutter serial=12342 14:28:45 Shutter LASER close 14:28:45 Received message from Camera: op=State serial=12344 14:28:45 GetSingleValue result=40 Value=cccccccc 14:28:45 SkyScan query 14:28:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:28:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:45 Parameters OK 14:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:45 Set A/D data flow result=40 14:28:45 Set A/D channel type result=40 14:28:45 Set A/D encoding result=40 14:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:45 Set channel filter=0.000000e+000 result=40 14:28:45 Config A/D Result=40 14:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:45 Get A/D filter: -9.255963e+061 result=40 14:28:45 Get A/D value=-858993460 result=40 14:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:28:45 Parameters OK 14:28:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:28:45 Set A/D data flow result=40 14:28:45 Set A/D channel type result=40 14:28:45 Set A/D encoding result=40 14:28:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:28:45 Set channel filter=0.000000e+000 result=40 14:28:45 Config A/D Result=40 14:28:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:28:45 Get A/D filter: -9.255963e+061 result=40 14:28:45 Get A/D value=-858993460 result=40 14:28:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:28:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:28:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:28:45 Aux= 14:28:45 Message to Camera, serial 12344 queued 14:29:16 Received message from Master: op=PointingHead serial=12351 14:29:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:29:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:29:16 Point started: ret=0 14:29:16 point_skyscan result=0 14:29:17 Check angles 14:29:17 SkyScan query 14:29:18 SkyScan query done: ret=0 az=109.35<-7290 ze=-81.72<-17448 Statuses=0009 0009 14:29:18 Msec=0 True Az=109.35 Ze=-81.72 Az status=0009 Ze status=0009 14:29:18 Check angles 14:29:18 SkyScan query 14:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.66<-18844 Statuses=0008 0009 14:29:19 Msec=750 True Az=112.995 Ze=-102.66 Az status=0008 Ze status=0009 14:29:19 Check angles 14:29:19 SkyScan query 14:29:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.6<-20240 Statuses=0008 0009 14:29:19 Msec=1500 True Az=112.995 Ze=-123.6 Az status=0008 Ze status=0009 14:29:19 Check angles 14:29:19 SkyScan query 14:29:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 14:29:20 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 14:29:20 Check angles 14:29:20 SkyScan query 14:29:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.51<-23034 Statuses=0008 0009 14:29:21 Msec=3000 True Az=112.995 Ze=-165.51 Az status=0008 Ze status=0009 14:29:21 Check angles 14:29:21 SkyScan query 14:29:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:29:22 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:29:22 Message to Master queued w/err=0: serial=12351 error=0 14:29:27 Received message from Master: op=Filter serial=12352 14:29:27 Color wheel filter change from 0 to 0 14:29:27 FLIGetFilterPos err=0 currentPosition=0 14:29:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:27 Filter is already there-color wheel unchanged 14:29:27 Received message from Master: op=Shutter serial=12353 14:29:27 Shutter LASER open 14:29:27 Received message from Camera: op=State serial=12355 14:29:27 GetSingleValue result=40 Value=cccccccc 14:29:27 SkyScan query 14:29:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:29:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:27 Parameters OK 14:29:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:27 Set A/D data flow result=40 14:29:27 Set A/D channel type result=40 14:29:27 Set A/D encoding result=40 14:29:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:27 Set channel filter=0.000000e+000 result=40 [UTC 2018-12-4 14:29:27] 14:29:27 Config A/D Result=40 14:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:28 Get A/D filter: -9.255963e+061 result=40 14:29:28 Get A/D value=-858993460 result=40 14:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:28 Parameters OK 14:29:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:28 Set A/D data flow result=40 14:29:28 Set A/D channel type result=40 14:29:28 Set A/D encoding result=40 14:29:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:28 Set channel filter=0.000000e+000 result=40 14:29:28 Config A/D Result=40 14:29:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:28 Get A/D filter: -9.255963e+061 result=40 14:29:28 Get A/D value=-858993460 result=40 14:29:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:28 Aux= 14:29:28 Message to Camera, serial 12355 queued 14:29:30 Received message from Master: op=Shutter serial=12359 14:29:30 Shutter LASER close 14:29:30 Received message from Master: op=PointingHead serial=12363 14:29:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:29:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:29:31 Point started: ret=0 14:29:31 point_skyscan result=0 14:29:31 Check angles 14:29:31 SkyScan query 14:29:32 SkyScan query done: ret=0 az=89.925<-5995 ze=157.275<-1515 Statuses=0009 0009 14:29:32 Msec=0 True Az=89.925 Ze=157.275 Az status=0009 Ze status=0009 14:29:32 Check angles 14:29:32 SkyScan query 14:29:33 SkyScan query done: ret=0 az=72.525<-4835 ze=136.29<-2914 Statuses=0009 0009 14:29:33 Msec=750 True Az=72.525 Ze=136.29 Az status=0009 Ze status=0009 14:29:33 Check angles 14:29:33 SkyScan query 14:29:33 SkyScan query done: ret=0 az=55.005<-3667 ze=115.35<-4310 Statuses=0009 0009 14:29:33 Msec=1500 True Az=55.005 Ze=115.35 Az status=0009 Ze status=0009 14:29:34 Check angles 14:29:34 SkyScan query 14:29:34 SkyScan query done: ret=0 az=40.875<-2725 ze=93.93<-5738 Statuses=0009 0009 14:29:34 Msec=2250 True Az=40.875 Ze=93.93 Az status=0009 Ze status=0009 14:29:34 Check angles 14:29:34 SkyScan query 14:29:35 SkyScan query done: ret=0 az=41.01<-2734 ze=72.99<-7134 Statuses=0008 0009 14:29:35 Msec=3000 True Az=41.01 Ze=72.99 Az status=0008 Ze status=0009 14:29:35 Check angles 14:29:35 SkyScan query 14:29:36 SkyScan query done: ret=0 az=40.995<-2733 ze=52.575<-8495 Statuses=0008 0009 14:29:36 Msec=3750 True Az=40.995 Ze=52.575 Az status=0008 Ze status=0009 14:29:36 Check angles 14:29:36 SkyScan query 14:29:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:29:37 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:29:37 Message to Master queued w/err=0: serial=12363 error=0 14:29:42 Received message from Master: op=Filter serial=12364 14:29:42 Color wheel filter change from 0 to 0 14:29:42 FLIGetFilterPos err=0 currentPosition=0 14:29:42 FLIGetStepsRemaining err=0 RemainingSteps=0 14:29:42 Filter is already there-color wheel unchanged 14:29:42 Received message from Master: op=Shutter serial=12365 14:29:42 Shutter LASER close 14:29:42 Received message from Camera: op=State serial=12367 14:29:42 GetSingleValue result=40 Value=cccccccc 14:29:42 SkyScan query 14:29:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:29:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:42 Parameters OK 14:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:42 Set A/D data flow result=40 14:29:42 Set A/D channel type result=40 14:29:42 Set A/D encoding result=40 14:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:42 Set channel filter=0.000000e+000 result=40 14:29:42 Config A/D Result=40 14:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:42 Get A/D filter: -9.255963e+061 result=40 14:29:42 Get A/D value=-858993460 result=40 14:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:29:42 Parameters OK 14:29:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:29:42 Set A/D data flow result=40 14:29:42 Set A/D channel type result=40 14:29:42 Set A/D encoding result=40 14:29:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:29:42 Set channel filter=0.000000e+000 result=40 14:29:42 Config A/D Result=40 14:29:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:29:42 Get A/D filter: -9.255963e+061 result=40 14:29:42 Get A/D value=-858993460 result=40 14:29:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:29:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:29:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:29:42 Aux= 14:29:42 Message to Camera, serial 12367 queued 14:30:13 Received message from Master: op=PointingHead serial=12374 14:30:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:30:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:30:14 Point started: ret=0 14:30:14 point_skyscan result=0 14:30:14 Check angles 14:30:14 SkyScan query 14:30:15 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 14:30:15 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 14:30:15 Check angles 14:30:15 SkyScan query 14:30:16 SkyScan query done: ret=0 az=81.54<-5436 ze=66.495<-7567 Statuses=0009 0008 14:30:16 Msec=750 True Az=81.54 Ze=66.495 Az status=0009 Ze status=0008 14:30:16 Check angles 14:30:16 SkyScan query 14:30:16 SkyScan query done: ret=0 az=99.18<-6612 ze=66.495<-7567 Statuses=0009 0008 14:30:16 Msec=1500 True Az=99.18 Ze=66.495 Az status=0009 Ze status=0008 14:30:17 Check angles 14:30:17 SkyScan query 14:30:17 SkyScan query done: ret=0 az=116.64<-7776 ze=66.495<-7567 Statuses=0009 0008 14:30:17 Msec=2250 True Az=116.64 Ze=66.495 Az status=0009 Ze status=0008 14:30:17 Check angles 14:30:17 SkyScan query 14:30:18 SkyScan query done: ret=0 az=134.085<-8939 ze=66.495<-7567 Statuses=0009 0008 14:30:18 Msec=3000 True Az=134.085 Ze=66.495 Az status=0009 Ze status=0008 14:30:18 Check angles 14:30:18 SkyScan query 14:30:19 SkyScan query done: ret=0 az=151.74<-10116 ze=66.495<-7567 Statuses=0009 0008 14:30:19 Msec=3750 True Az=151.74 Ze=66.495 Az status=0009 Ze status=0008 14:30:19 Check angles 14:30:19 SkyScan query 14:30:19 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:30:19 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:30:19 Message to Master queued w/err=0: serial=12374 error=0 14:30:24 Received message from Master: op=Filter serial=12375 14:30:24 Color wheel filter change from 0 to 0 14:30:24 FLIGetFilterPos err=0 currentPosition=0 14:30:24 FLIGetStepsRemaining err=0 RemainingSteps=0 14:30:24 Filter is already there-color wheel unchanged 14:30:25 Received message from Master: op=Shutter serial=12376 14:30:25 Shutter LASER close 14:30:25 Received message from Camera: op=State serial=12378 14:30:25 GetSingleValue result=40 Value=cccccccc 14:30:25 SkyScan query 14:30:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:30:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:25 Parameters OK 14:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:25 Set A/D data flow result=40 14:30:25 Set A/D channel type result=40 14:30:25 Set A/D encoding result=40 14:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:25 Set channel filter=0.000000e+000 result=40 14:30:25 Config A/D Result=40 14:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:25 Get A/D filter: -9.255963e+061 result=40 14:30:25 Get A/D value=-858993460 result=40 14:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:30:25 Parameters OK 14:30:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:30:25 Set A/D data flow result=40 14:30:25 Set A/D channel type result=40 14:30:25 Set A/D encoding result=40 14:30:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:30:25 Set channel filter=0.000000e+000 result=40 14:30:25 Config A/D Result=40 14:30:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:30:25 Get A/D filter: -9.255963e+061 result=40 14:30:25 Get A/D value=-858993460 result=40 14:30:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:30:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:30:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:30:25 Aux= 14:30:25 Message to Camera, serial 12378 queued 14:30:56 Received message from Master: op=PointingHead serial=12385 14:30:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:30:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:30:56 Point started: ret=0 14:30:56 point_skyscan result=0 14:30:57 Check angles 14:30:57 SkyScan query 14:30:58 SkyScan query done: ret=0 az=135.195<-9013 ze=36.945<-9537 Statuses=0009 0009 14:30:58 Msec=0 True Az=135.195 Ze=36.945 Az status=0009 Ze status=0009 14:30:58 Check angles 14:30:58 SkyScan query 14:30:59 SkyScan query done: ret=0 az=117.33<-7822 ze=15.585<-10961 Statuses=0009 0009 14:30:59 Msec=750 True Az=117.33 Ze=15.585 Az status=0009 Ze status=0009 14:30:59 Check angles 14:30:59 SkyScan query 14:30:59 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.415<-12361 Statuses=0009 0009 14:30:59 Msec=1500 True Az=99.945 Ze=-5.415 Az status=0009 Ze status=0009 14:30:59 Check angles 14:30:59 SkyScan query 14:31:00 SkyScan query done: ret=0 az=82.5<-5500 ze=-26.37<-13758 Statuses=0009 0009 14:31:00 Msec=2250 True Az=82.5 Ze=-26.37 Az status=0009 Ze status=0009 14:31:00 Check angles 14:31:00 SkyScan query 14:31:01 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.565<-14571 Statuses=0009 0008 14:31:01 Msec=3000 True Az=64.92 Ze=-38.565 Az status=0009 Ze status=0008 14:31:01 Check angles 14:31:01 SkyScan query 14:31:02 SkyScan query done: ret=0 az=47.535<-3169 ze=-38.535<-14569 Statuses=0009 0008 14:31:02 Msec=3750 True Az=47.535 Ze=-38.535 Az status=0009 Ze status=0008 14:31:02 Check angles 14:31:02 SkyScan query 14:31:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:31:02 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:31:02 Message to Master queued w/err=0: serial=12385 error=0 14:31:07 Received message from Master: op=Filter serial=12386 14:31:07 Color wheel filter change from 0 to 0 14:31:07 FLIGetFilterPos err=0 currentPosition=0 14:31:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:07 Filter is already there-color wheel unchanged 14:31:07 Received message from Master: op=Shutter serial=12387 14:31:07 Shutter LASER close 14:31:08 Received message from Camera: op=State serial=12389 14:31:08 GetSingleValue result=40 Value=cccccccc 14:31:08 SkyScan query 14:31:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:31:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:08 Parameters OK 14:31:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:08 Set A/D data flow result=40 14:31:08 Set A/D channel type result=40 14:31:08 Set A/D encoding result=40 14:31:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:08 Set channel filter=0.000000e+000 result=40 14:31:08 Config A/D Result=40 14:31:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:08 Get A/D filter: -9.255963e+061 result=40 14:31:08 Get A/D value=-858993460 result=40 14:31:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:08 Parameters OK 14:31:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:08 Set A/D data flow result=40 14:31:08 Set A/D channel type result=40 14:31:08 Set A/D encoding result=40 14:31:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:08 Set channel filter=0.000000e+000 result=40 14:31:08 Config A/D Result=40 14:31:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:08 Get A/D filter: -9.255963e+061 result=40 14:31:08 Get A/D value=-858993460 result=40 14:31:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:08 Aux= 14:31:08 Message to Camera, serial 12389 queued 14:31:39 Received message from Master: op=PointingHead serial=12396 14:31:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:31:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:31:39 Point started: ret=0 14:31:39 point_skyscan result=0 14:31:40 Check angles 14:31:40 SkyScan query 14:31:41 SkyScan query done: ret=0 az=64.2<-4280 ze=-68.46<-16564 Statuses=0009 0009 14:31:41 Msec=0 True Az=64.2 Ze=-68.46 Az status=0009 Ze status=0009 14:31:41 Check angles 14:31:41 SkyScan query 14:31:41 SkyScan query done: ret=0 az=82.215<-5481 ze=-89.835<-17989 Statuses=0009 0009 14:31:41 Msec=750 True Az=82.215 Ze=-89.835 Az status=0009 Ze status=0009 14:31:42 Check angles 14:31:42 SkyScan query 14:31:42 SkyScan query done: ret=0 az=99.615<-6641 ze=-110.79<-19386 Statuses=0009 0009 14:31:42 Msec=1500 True Az=99.615 Ze=-110.79 Az status=0009 Ze status=0009 14:31:42 Check angles 14:31:42 SkyScan query 14:31:43 SkyScan query done: ret=0 az=117.015<-7801 ze=-131.73<-20782 Statuses=0009 0009 14:31:43 Msec=2250 True Az=117.015 Ze=-131.73 Az status=0009 Ze status=0009 14:31:43 Check angles 14:31:43 SkyScan query 14:31:44 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 14:31:44 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 14:31:44 Check angles 14:31:44 SkyScan query 14:31:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:31:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:31:44 Message to Master queued w/err=0: serial=12396 error=0 14:31:49 Received message from Master: op=Filter serial=12397 14:31:49 Color wheel filter change from 0 to 0 14:31:49 FLIGetFilterPos err=0 currentPosition=0 14:31:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:31:49 Filter is already there-color wheel unchanged 14:31:50 Received message from Master: op=Shutter serial=12398 14:31:50 Shutter LASER close 14:31:50 Received message from Camera: op=State serial=12400 14:31:50 GetSingleValue result=40 Value=cccccccc 14:31:50 SkyScan query 14:31:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:31:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:50 Parameters OK 14:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:50 Set A/D data flow result=40 14:31:50 Set A/D channel type result=40 14:31:50 Set A/D encoding result=40 14:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:50 Set channel filter=0.000000e+000 result=40 14:31:50 Config A/D Result=40 14:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:50 Get A/D filter: -9.255963e+061 result=40 14:31:50 Get A/D value=-858993460 result=40 14:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:31:50 Parameters OK 14:31:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:31:50 Set A/D data flow result=40 14:31:50 Set A/D channel type result=40 14:31:50 Set A/D encoding result=40 14:31:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:31:50 Set channel filter=0.000000e+000 result=40 14:31:50 Config A/D Result=40 14:31:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:31:50 Get A/D filter: -9.255963e+061 result=40 14:31:50 Get A/D value=-858993460 result=40 14:31:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:31:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:31:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:31:50 Aux= 14:31:50 Message to Camera, serial 12400 queued [UTC 2018-12-4 14:32:09] 14:32:21 Received message from Master: op=PointingHead serial=12407 14:32:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:32:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:32:21 Point started: ret=0 14:32:21 point_skyscan result=0 14:32:22 Check angles 14:32:22 SkyScan query 14:32:23 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 14:32:23 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 14:32:23 Check angles 14:32:23 SkyScan query 14:32:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:32:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:32:23 Message to Master queued w/err=0: serial=12407 error=0 14:32:28 Received message from Master: op=Filter serial=12408 14:32:28 Color wheel filter change from 0 to 0 14:32:28 FLIGetFilterPos err=0 currentPosition=0 14:32:28 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:28 Filter is already there-color wheel unchanged 14:32:29 Received message from Master: op=Shutter serial=12409 14:32:29 Shutter LASER open 14:32:29 Received message from Camera: op=State serial=12411 14:32:29 GetSingleValue result=40 Value=cccccccc 14:32:29 SkyScan query 14:32:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:32:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:29 Parameters OK 14:32:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:29 Set A/D data flow result=40 14:32:29 Set A/D channel type result=40 14:32:29 Set A/D encoding result=40 14:32:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:29 Set channel filter=0.000000e+000 result=40 14:32:29 Config A/D Result=40 14:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:29 Get A/D filter: -9.255963e+061 result=40 14:32:29 Get A/D value=-858993460 result=40 14:32:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:29 Parameters OK 14:32:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:29 Set A/D data flow result=40 14:32:29 Set A/D channel type result=40 14:32:29 Set A/D encoding result=40 14:32:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:29 Set channel filter=0.000000e+000 result=40 14:32:29 Config A/D Result=40 14:32:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:29 Get A/D filter: -9.255963e+061 result=40 14:32:29 Get A/D value=-858993460 result=40 14:32:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:29 Aux= 14:32:29 Message to Camera, serial 12411 queued 14:32:32 Received message from Master: op=Shutter serial=12415 14:32:32 Shutter LASER close 14:32:32 Received message from Master: op=PointingHead serial=12419 14:32:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:32:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:32:33 Point started: ret=0 14:32:33 point_skyscan result=0 14:32:34 Check angles 14:32:34 SkyScan query 14:32:34 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.68<-21512 Statuses=0009 0009 14:32:34 Msec=0 True Az=136.38 Ze=-142.68 Az status=0009 Ze status=0009 14:32:34 Check angles 14:32:34 SkyScan query 14:32:35 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.74<-20116 Statuses=0009 0009 14:32:35 Msec=750 True Az=153.9 Ze=-121.74 Az status=0009 Ze status=0009 14:32:35 Check angles 14:32:35 SkyScan query 14:32:36 SkyScan query done: ret=0 az=171.39<-11426 ze=-100.785<-18719 Statuses=0009 0009 14:32:36 Msec=1500 True Az=171.39 Ze=-100.785 Az status=0009 Ze status=0009 14:32:36 Check angles 14:32:36 SkyScan query 14:32:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.83<-17322 Statuses=0008 0009 14:32:36 Msec=2250 True Az=176.01 Ze=-79.83 Az status=0008 Ze status=0009 14:32:37 Check angles 14:32:37 SkyScan query 14:32:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 14:32:37 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 14:32:37 Check angles 14:32:37 SkyScan query 14:32:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:32:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:32:38 Message to Master queued w/err=0: serial=12419 error=0 14:32:43 Received message from Master: op=Filter serial=12420 14:32:43 Color wheel filter change from 0 to 0 14:32:43 FLIGetFilterPos err=0 currentPosition=0 14:32:43 FLIGetStepsRemaining err=0 RemainingSteps=0 14:32:43 Filter is already there-color wheel unchanged 14:32:43 Received message from Master: op=Shutter serial=12421 14:32:43 Shutter LASER close 14:32:43 Received message from Camera: op=State serial=12423 14:32:43 GetSingleValue result=40 Value=cccccccc 14:32:43 SkyScan query 14:32:44 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:32:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:44 Parameters OK 14:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:44 Set A/D data flow result=40 14:32:44 Set A/D channel type result=40 14:32:44 Set A/D encoding result=40 14:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:44 Set channel filter=0.000000e+000 result=40 14:32:44 Config A/D Result=40 14:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:44 Get A/D filter: -9.255963e+061 result=40 14:32:44 Get A/D value=-858993460 result=40 14:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:32:44 Parameters OK 14:32:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:32:44 Set A/D data flow result=40 14:32:44 Set A/D channel type result=40 14:32:44 Set A/D encoding result=40 14:32:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:32:44 Set channel filter=0.000000e+000 result=40 14:32:44 Config A/D Result=40 14:32:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:32:44 Get A/D filter: -9.255963e+061 result=40 14:32:44 Get A/D value=-858993460 result=40 14:32:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:32:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:32:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:32:44 Aux= 14:32:44 Message to Camera, serial 12423 queued 14:33:15 Received message from Master: op=PointingHead serial=12430 14:33:15 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:33:15 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:33:15 Point started: ret=0 14:33:15 point_skyscan result=0 14:33:16 Check angles 14:33:16 SkyScan query 14:33:16 SkyScan query done: ret=0 az=153<-10200 ze=-21.75<-13450 Statuses=0009 0009 14:33:16 Msec=0 True Az=153 Ze=-21.75 Az status=0009 Ze status=0009 14:33:17 Check angles 14:33:17 SkyScan query 14:33:17 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.75<-12050 Statuses=0009 0009 14:33:17 Msec=750 True Az=135.45 Ze=-0.75 Az status=0009 Ze status=0009 14:33:17 Check angles 14:33:17 SkyScan query 14:33:18 SkyScan query done: ret=0 az=118.05<-7870 ze=20.205<-10653 Statuses=0009 0009 14:33:18 Msec=1500 True Az=118.05 Ze=20.205 Az status=0009 Ze status=0009 14:33:18 Check angles 14:33:18 SkyScan query 14:33:19 SkyScan query done: ret=0 az=100.65<-6710 ze=41.145<-9257 Statuses=0009 0009 14:33:19 Msec=2250 True Az=100.65 Ze=41.145 Az status=0009 Ze status=0009 14:33:19 Check angles 14:33:19 SkyScan query 14:33:19 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:33:19 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:33:20 Check angles 14:33:20 SkyScan query 14:33:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:33:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:33:20 Message to Master queued w/err=0: serial=12430 error=0 14:33:25 Received message from Master: op=Filter serial=12431 14:33:25 Color wheel filter change from 0 to 0 14:33:25 FLIGetFilterPos err=0 currentPosition=0 14:33:25 FLIGetStepsRemaining err=0 RemainingSteps=0 14:33:25 Filter is already there-color wheel unchanged 14:33:25 Received message from Master: op=Shutter serial=12432 14:33:25 Shutter LASER close 14:33:25 Received message from Camera: op=State serial=12434 14:33:25 GetSingleValue result=40 Value=cccccccc 14:33:25 SkyScan query 14:33:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:33:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:26 Parameters OK 14:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:26 Set A/D data flow result=40 14:33:26 Set A/D channel type result=40 14:33:26 Set A/D encoding result=40 14:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:26 Set channel filter=0.000000e+000 result=40 14:33:26 Config A/D Result=40 14:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:26 Get A/D filter: -9.255963e+061 result=40 14:33:26 Get A/D value=-858993460 result=40 14:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:33:26 Parameters OK 14:33:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:33:26 Set A/D data flow result=40 14:33:26 Set A/D channel type result=40 14:33:26 Set A/D encoding result=40 14:33:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:33:26 Set channel filter=0.000000e+000 result=40 14:33:26 Config A/D Result=40 14:33:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:33:26 Get A/D filter: -9.255963e+061 result=40 14:33:26 Get A/D value=-858993460 result=40 14:33:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:33:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:33:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:33:26 Aux= 14:33:26 Message to Camera, serial 12434 queued 14:33:57 Received message from Master: op=PointingHead serial=12441 14:33:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:33:57 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:33:57 Point started: ret=0 14:33:57 point_skyscan result=0 14:33:58 Check angles 14:33:58 SkyScan query 14:33:58 SkyScan query done: ret=0 az=108.78<-7252 ze=38.49<-9434 Statuses=0009 0008 14:33:58 Msec=0 True Az=108.78 Ze=38.49 Az status=0009 Ze status=0008 14:33:59 Check angles 14:33:59 SkyScan query 14:33:59 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 14:33:59 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 14:33:59 Check angles 14:33:59 SkyScan query 14:34:00 SkyScan query done: ret=0 az=143.745<-9583 ze=38.505<-9433 Statuses=0009 0008 14:34:00 Msec=1500 True Az=143.745 Ze=38.505 Az status=0009 Ze status=0008 14:34:00 Check angles 14:34:00 SkyScan query 14:34:01 SkyScan query done: ret=0 az=161.115<-10741 ze=38.505<-9433 Statuses=0009 0008 14:34:01 Msec=2250 True Az=161.115 Ze=38.505 Az status=0009 Ze status=0008 14:34:01 Check angles 14:34:01 SkyScan query 14:34:01 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 14:34:01 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 14:34:02 Check angles 14:34:02 SkyScan query 14:34:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:34:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:34:02 Message to Master queued w/err=0: serial=12441 error=0 14:34:07 Received message from Master: op=Filter serial=12442 14:34:07 Color wheel filter change from 0 to 0 14:34:07 FLIGetFilterPos err=0 currentPosition=0 14:34:07 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:07 Filter is already there-color wheel unchanged 14:34:07 Received message from Master: op=Shutter serial=12443 14:34:07 Shutter LASER close 14:34:07 Received message from Camera: op=State serial=12445 14:34:07 GetSingleValue result=40 Value=cccccccc 14:34:07 SkyScan query 14:34:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:34:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:08 Parameters OK 14:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:08 Set A/D data flow result=40 14:34:08 Set A/D channel type result=40 14:34:08 Set A/D encoding result=40 14:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:08 Set channel filter=0.000000e+000 result=40 14:34:08 Config A/D Result=40 14:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:08 Get A/D filter: -9.255963e+061 result=40 14:34:08 Get A/D value=-858993460 result=40 14:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:08 Parameters OK 14:34:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:08 Set A/D data flow result=40 14:34:08 Set A/D channel type result=40 14:34:08 Set A/D encoding result=40 14:34:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:08 Set channel filter=0.000000e+000 result=40 14:34:08 Config A/D Result=40 14:34:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:08 Get A/D filter: -9.255963e+061 result=40 14:34:08 Get A/D value=-858993460 result=40 14:34:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:08 Aux= 14:34:08 Message to Camera, serial 12445 queued 14:34:39 Received message from Master: op=PointingHead serial=12452 14:34:39 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:34:39 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:34:39 Point started: ret=0 14:34:39 point_skyscan result=0 14:34:40 Check angles 14:34:40 SkyScan query 14:34:41 SkyScan query done: ret=0 az=152.985<-10199 ze=8.7<-11420 Statuses=0009 0009 14:34:41 Msec=0 True Az=152.985 Ze=8.7 Az status=0009 Ze status=0009 14:34:41 Check angles 14:34:41 SkyScan query 14:34:41 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.24<-12816 Statuses=0009 0009 14:34:41 Msec=750 True Az=135.465 Ze=-12.24 Az status=0009 Ze status=0009 14:34:41 Check angles 14:34:41 SkyScan query 14:34:42 SkyScan query done: ret=0 az=118.02<-7868 ze=-33.18<-14212 Statuses=0009 0009 14:34:42 Msec=1500 True Az=118.02 Ze=-33.18 Az status=0009 Ze status=0009 14:34:42 Check angles 14:34:42 SkyScan query 14:34:43 SkyScan query done: ret=0 az=100.635<-6709 ze=-51.525<-15435 Statuses=0009 0009 14:34:43 Msec=2250 True Az=100.635 Ze=-51.525 Az status=0009 Ze status=0009 14:34:43 Check angles 14:34:43 SkyScan query 14:34:44 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 14:34:44 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 14:34:44 Check angles 14:34:44 SkyScan query 14:34:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:34:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:34:44 Message to Master queued w/err=0: serial=12452 error=0 14:34:49 Received message from Master: op=Filter serial=12453 14:34:49 Color wheel filter change from 0 to 0 14:34:49 FLIGetFilterPos err=0 currentPosition=0 14:34:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:34:49 Filter is already there-color wheel unchanged 14:34:49 Received message from Master: op=Shutter serial=12454 14:34:49 Shutter LASER close 14:34:50 Received message from Camera: op=State serial=12456 14:34:50 GetSingleValue result=40 Value=cccccccc 14:34:50 SkyScan query 14:34:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:34:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:50 Parameters OK 14:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:50 Set A/D data flow result=40 14:34:50 Set A/D channel type result=40 14:34:50 Set A/D encoding result=40 14:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:50 Set channel filter=0.000000e+000 result=40 14:34:50 Config A/D Result=40 14:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:50 Get A/D filter: -9.255963e+061 result=40 14:34:50 Get A/D value=-858993460 result=40 14:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:34:50 Parameters OK 14:34:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:34:50 Set A/D data flow result=40 14:34:50 Set A/D channel type result=40 14:34:50 Set A/D encoding result=40 14:34:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:34:50 Set channel filter=0.000000e+000 result=40 14:34:50 Config A/D Result=40 14:34:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:34:50 Get A/D filter: -9.255963e+061 result=40 14:34:50 Get A/D value=-858993460 result=40 14:34:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:34:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:34:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:34:50 Aux= 14:34:50 Message to Camera, serial 12456 queued 14:35:21 Received message from Master: op=PointingHead serial=12463 14:35:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:35:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:35:21 Point started: ret=0 14:35:21 point_skyscan result=0 14:35:22 Check angles 14:35:22 SkyScan query 14:35:23 SkyScan query done: ret=0 az=109.14<-7276 ze=-81.315<-17421 Statuses=0009 0009 14:35:23 Msec=0 True Az=109.14 Ze=-81.315 Az status=0009 Ze status=0009 14:35:23 Check angles 14:35:23 SkyScan query 14:35:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.27<-18818 Statuses=0008 0009 14:35:23 Msec=750 True Az=112.995 Ze=-102.27 Az status=0008 Ze status=0009 14:35:24 Check angles 14:35:24 SkyScan query 14:35:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.195<-20213 Statuses=0008 0009 14:35:24 Msec=1500 True Az=112.995 Ze=-123.195 Az status=0008 Ze status=0009 14:35:24 Check angles 14:35:24 SkyScan query 14:35:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.6<-21640 Statuses=0008 0009 14:35:25 Msec=2250 True Az=112.995 Ze=-144.6 Az status=0008 Ze status=0009 14:35:25 Check angles 14:35:25 SkyScan query 14:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.54<-23036 Statuses=0008 0009 14:35:26 Msec=3000 True Az=112.995 Ze=-165.54 Az status=0008 Ze status=0009 14:35:26 Check angles 14:35:26 SkyScan query 14:35:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:35:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:35:26 Message to Master queued w/err=0: serial=12463 error=0 14:35:31 Received message from Master: op=Filter serial=12464 14:35:31 Color wheel filter change from 0 to 0 14:35:31 FLIGetFilterPos err=0 currentPosition=0 14:35:31 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:31 Filter is already there-color wheel unchanged 14:35:32 Received message from Master: op=Shutter serial=12465 14:35:32 Shutter LASER open 14:35:32 Received message from Camera: op=State serial=12467 14:35:32 GetSingleValue result=40 Value=cccccccc 14:35:32 SkyScan query 14:35:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:35:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:32 Parameters OK 14:35:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:32 Set A/D data flow result=40 14:35:32 Set A/D channel type result=40 14:35:32 Set A/D encoding result=40 14:35:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:32 Set channel filter=0.000000e+000 result=40 14:35:32 Config A/D Result=40 14:35:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:32 Get A/D filter: -9.255963e+061 result=40 14:35:32 Get A/D value=-858993460 result=40 14:35:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:32 Parameters OK 14:35:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:32 Set A/D data flow result=40 14:35:32 Set A/D channel type result=40 14:35:32 Set A/D encoding result=40 14:35:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:32 Set channel filter=0.000000e+000 result=40 14:35:32 Config A/D Result=40 14:35:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:32 Get A/D filter: -9.255963e+061 result=40 14:35:32 Get A/D value=-858993460 result=40 14:35:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:32 Aux= 14:35:32 Message to Camera, serial 12467 queued 14:35:35 Received message from Master: op=Shutter serial=12471 14:35:35 Shutter LASER close 14:35:35 Received message from Master: op=PointingHead serial=12475 14:35:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:35:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:35:36 Point started: ret=0 14:35:36 point_skyscan result=0 14:35:36 Check angles 14:35:36 SkyScan query 14:35:37 SkyScan query done: ret=0 az=89.925<-5995 ze=157.26<-1516 Statuses=0009 0009 14:35:37 Msec=0 True Az=89.925 Ze=157.26 Az status=0009 Ze status=0009 14:35:37 Check angles 14:35:37 SkyScan query 14:35:38 SkyScan query done: ret=0 az=72.27<-4818 ze=135.855<-2943 Statuses=0009 0009 14:35:38 Msec=750 True Az=72.27 Ze=135.855 Az status=0009 Ze status=0009 14:35:38 Check angles 14:35:38 SkyScan query 14:35:38 SkyScan query done: ret=0 az=55.005<-3667 ze=115.305<-4313 Statuses=0009 0009 14:35:38 Msec=1500 True Az=55.005 Ze=115.305 Az status=0009 Ze status=0009 14:35:39 Check angles 14:35:39 SkyScan query 14:35:39 SkyScan query done: ret=0 az=40.83<-2722 ze=94.38<-5708 Statuses=0009 0009 14:35:39 Msec=2250 True Az=40.83 Ze=94.38 Az status=0009 Ze status=0009 14:35:39 Check angles 14:35:39 SkyScan query 14:35:40 SkyScan query done: ret=0 az=41.01<-2734 ze=73.425<-7105 Statuses=0008 0009 14:35:40 Msec=3000 True Az=41.01 Ze=73.425 Az status=0008 Ze status=0009 14:35:40 Check angles 14:35:40 SkyScan query 14:35:41 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 14:35:41 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 14:35:41 Check angles 14:35:41 SkyScan query 14:35:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:35:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:35:41 Message to Master queued w/err=0: serial=12475 error=0 14:35:46 Received message from Master: op=Filter serial=12476 14:35:46 Color wheel filter change from 0 to 0 14:35:46 FLIGetFilterPos err=0 currentPosition=0 14:35:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:35:46 Filter is already there-color wheel unchanged 14:35:47 Received message from Master: op=Shutter serial=12477 14:35:47 Shutter LASER close 14:35:47 Received message from Camera: op=State serial=12479 14:35:47 GetSingleValue result=40 Value=cccccccc 14:35:47 SkyScan query 14:35:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:35:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:47 Parameters OK 14:35:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:47 Set A/D data flow result=40 14:35:47 Set A/D channel type result=40 14:35:47 Set A/D encoding result=40 14:35:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:47 Set channel filter=0.000000e+000 result=40 14:35:47 Config A/D Result=40 14:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:47 Get A/D filter: -9.255963e+061 result=40 14:35:47 Get A/D value=-858993460 result=40 14:35:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:35:47 Parameters OK 14:35:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:35:47 Set A/D data flow result=40 14:35:47 Set A/D channel type result=40 14:35:47 Set A/D encoding result=40 14:35:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:35:47 Set channel filter=0.000000e+000 result=40 14:35:47 Config A/D Result=40 14:35:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:35:47 Get A/D filter: -9.255963e+061 result=40 14:35:47 Get A/D value=-858993460 result=40 14:35:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:35:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:35:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:35:47 Aux= 14:35:47 Message to Camera, serial 12479 queued 14:36:18 Received message from Master: op=PointingHead serial=12486 14:36:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:36:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:36:18 Point started: ret=0 14:36:18 point_skyscan result=0 14:36:19 Check angles 14:36:19 SkyScan query 14:36:20 SkyScan query done: ret=0 az=63.795<-4253 ze=66.555<-7563 Statuses=0009 0008 14:36:20 Msec=0 True Az=63.795 Ze=66.555 Az status=0009 Ze status=0008 14:36:20 Check angles 14:36:20 SkyScan query 14:36:21 SkyScan query done: ret=0 az=81.195<-5413 ze=66.51<-7566 Statuses=0009 0008 14:36:21 Msec=750 True Az=81.195 Ze=66.51 Az status=0009 Ze status=0008 14:36:21 Check angles 14:36:21 SkyScan query 14:36:21 SkyScan query done: ret=0 az=98.91<-6594 ze=66.495<-7567 Statuses=0009 0008 14:36:21 Msec=1500 True Az=98.91 Ze=66.495 Az status=0009 Ze status=0008 14:36:21 Check angles 14:36:21 SkyScan query 14:36:22 SkyScan query done: ret=0 az=116.325<-7755 ze=66.495<-7567 Statuses=0009 0008 14:36:22 Msec=2250 True Az=116.325 Ze=66.495 Az status=0009 Ze status=0008 14:36:22 Check angles 14:36:22 SkyScan query 14:36:23 SkyScan query done: ret=0 az=133.83<-8922 ze=66.495<-7567 Statuses=0009 0008 14:36:23 Msec=3000 True Az=133.83 Ze=66.495 Az status=0009 Ze status=0008 14:36:23 Check angles 14:36:23 SkyScan query 14:36:24 SkyScan query done: ret=0 az=151.11<-10074 ze=66.495<-7567 Statuses=0009 0008 14:36:24 Msec=3750 True Az=151.11 Ze=66.495 Az status=0009 Ze status=0008 14:36:24 Check angles 14:36:24 SkyScan query 14:36:24 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 14:36:24 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 14:36:24 Message to Master queued w/err=0: serial=12486 error=0 14:36:29 Received message from Master: op=Filter serial=12487 14:36:29 Color wheel filter change from 0 to 0 14:36:29 FLIGetFilterPos err=0 currentPosition=0 14:36:29 FLIGetStepsRemaining err=0 RemainingSteps=0 14:36:29 Filter is already there-color wheel unchanged 14:36:29 Received message from Master: op=Shutter serial=12488 14:36:29 Shutter LASER close 14:36:30 Received message from Camera: op=State serial=12490 14:36:30 GetSingleValue result=40 Value=cccccccc 14:36:30 SkyScan query 14:36:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:36:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:30 Parameters OK 14:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:30 Set A/D data flow result=40 14:36:30 Set A/D channel type result=40 14:36:30 Set A/D encoding result=40 14:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:30 Set channel filter=0.000000e+000 result=40 14:36:30 Config A/D Result=40 14:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:30 Get A/D filter: -9.255963e+061 result=40 14:36:30 Get A/D value=-858993460 result=40 14:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:36:30 Parameters OK 14:36:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:36:30 Set A/D data flow result=40 14:36:30 Set A/D channel type result=40 14:36:30 Set A/D encoding result=40 14:36:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:36:30 Set channel filter=0.000000e+000 result=40 14:36:30 Config A/D Result=40 14:36:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:36:30 Get A/D filter: -9.255963e+061 result=40 14:36:30 Get A/D value=-858993460 result=40 14:36:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:36:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:36:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:36:30 Aux= 14:36:30 Message to Camera, serial 12490 queued 14:37:01 Received message from Master: op=PointingHead serial=12497 14:37:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:37:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:37:01 Point started: ret=0 14:37:01 point_skyscan result=0 14:37:02 Check angles 14:37:02 SkyScan query 14:37:03 SkyScan query done: ret=0 az=134.37<-8958 ze=36.21<-9586 Statuses=0009 0009 14:37:03 Msec=0 True Az=134.37 Ze=36.21 Az status=0009 Ze status=0009 14:37:03 Check angles 14:37:03 SkyScan query 14:37:03 SkyScan query done: ret=0 az=116.88<-7792 ze=15.27<-10982 Statuses=0009 0009 14:37:03 Msec=750 True Az=116.88 Ze=15.27 Az status=0009 Ze status=0009 14:37:04 Check angles 14:37:04 SkyScan query 14:37:04 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.7<-12380 Statuses=0009 0009 14:37:04 Msec=1500 True Az=99.51 Ze=-5.7 Az status=0009 Ze status=0009 14:37:04 Check angles 14:37:04 SkyScan query 14:37:05 SkyScan query done: ret=0 az=81.69<-5446 ze=-27.06<-13804 Statuses=0009 0009 14:37:05 Msec=2250 True Az=81.69 Ze=-27.06 Az status=0009 Ze status=0009 14:37:05 Check angles 14:37:05 SkyScan query 14:37:06 SkyScan query done: ret=0 az=64.185<-4279 ze=-38.565<-14571 Statuses=0009 0008 14:37:06 Msec=3000 True Az=64.185 Ze=-38.565 Az status=0009 Ze status=0008 14:37:06 Check angles 14:37:06 SkyScan query 14:37:06 SkyScan query done: ret=0 az=46.725<-3115 ze=-38.52<-14568 Statuses=0009 0008 14:37:06 Msec=3750 True Az=46.725 Ze=-38.52 Az status=0009 Ze status=0008 14:37:07 Check angles 14:37:07 SkyScan query 14:37:07 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:37:07 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:37:07 Message to Master queued w/err=0: serial=12497 error=0 14:37:12 Received message from Master: op=Filter serial=12498 14:37:12 Color wheel filter change from 0 to 0 14:37:12 FLIGetFilterPos err=0 currentPosition=0 14:37:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:12 Filter is already there-color wheel unchanged 14:37:12 Received message from Master: op=Shutter serial=12499 14:37:12 Shutter LASER close 14:37:12 Received message from Camera: op=State serial=12501 14:37:12 GetSingleValue result=40 Value=cccccccc 14:37:12 SkyScan query 14:37:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:37:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:13 Parameters OK 14:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:13 Set A/D data flow result=40 14:37:13 Set A/D channel type result=40 14:37:13 Set A/D encoding result=40 14:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:13 Set channel filter=0.000000e+000 result=40 14:37:13 Config A/D Result=40 14:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:13 Get A/D filter: -9.255963e+061 result=40 14:37:13 Get A/D value=-858993460 result=40 14:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:13 Parameters OK 14:37:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:13 Set A/D data flow result=40 14:37:13 Set A/D channel type result=40 14:37:13 Set A/D encoding result=40 14:37:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:13 Set channel filter=0.000000e+000 result=40 14:37:13 Config A/D Result=40 14:37:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:13 Get A/D filter: -9.255963e+061 result=40 14:37:13 Get A/D value=-858993460 result=40 14:37:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:13 Aux= 14:37:13 Message to Camera, serial 12501 queued 14:37:44 Received message from Master: op=PointingHead serial=12508 14:37:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:37:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:37:44 Point started: ret=0 14:37:44 point_skyscan result=0 14:37:45 Check angles 14:37:45 SkyScan query 14:37:45 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.16<-16544 Statuses=0009 0009 14:37:45 Msec=0 True Az=63.795 Ze=-68.16 Az status=0009 Ze status=0009 14:37:46 Check angles 14:37:46 SkyScan query 14:37:46 SkyScan query done: ret=0 az=81.225<-5415 ze=-89.13<-17942 Statuses=0009 0009 14:37:46 Msec=750 True Az=81.225 Ze=-89.13 Az status=0009 Ze status=0009 14:37:46 Check angles 14:37:46 SkyScan query 14:37:47 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.055<-19337 Statuses=0009 0009 14:37:47 Msec=1500 True Az=98.91 Ze=-110.055 Az status=0009 Ze status=0009 14:37:47 Check angles 14:37:47 SkyScan query 14:37:48 SkyScan query done: ret=0 az=116.46<-7764 ze=-131.025<-20735 Statuses=0009 0009 14:37:48 Msec=2250 True Az=116.46 Ze=-131.025 Az status=0009 Ze status=0009 14:37:48 Check angles 14:37:48 SkyScan query 14:37:48 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 14:37:48 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 14:37:49 Check angles 14:37:49 SkyScan query 14:37:49 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:37:49 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:37:49 Message to Master queued w/err=0: serial=12508 error=0 14:37:54 Received message from Master: op=Filter serial=12509 14:37:54 Color wheel filter change from 0 to 0 14:37:54 FLIGetFilterPos err=0 currentPosition=0 14:37:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:37:54 Filter is already there-color wheel unchanged 14:37:54 Received message from Master: op=Shutter serial=12510 14:37:54 Shutter LASER close 14:37:54 Received message from Camera: op=State serial=12512 14:37:54 GetSingleValue result=40 Value=cccccccc 14:37:54 SkyScan query 14:37:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:37:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:55 Parameters OK 14:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:55 Set A/D data flow result=40 14:37:55 Set A/D channel type result=40 14:37:55 Set A/D encoding result=40 14:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:55 Set channel filter=0.000000e+000 result=40 14:37:55 Config A/D Result=40 14:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:55 Get A/D filter: -9.255963e+061 result=40 14:37:55 Get A/D value=-858993460 result=40 14:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:37:55 Parameters OK 14:37:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:37:55 Set A/D data flow result=40 14:37:55 Set A/D channel type result=40 14:37:55 Set A/D encoding result=40 14:37:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:37:55 Set channel filter=0.000000e+000 result=40 14:37:55 Config A/D Result=40 14:37:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:37:55 Get A/D filter: -9.255963e+061 result=40 14:37:55 Get A/D value=-858993460 result=40 14:37:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:37:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:37:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:37:55 Aux= 14:37:55 Message to Camera, serial 12512 queued 14:38:26 Received message from Master: op=PointingHead serial=12519 14:38:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:38:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:38:26 Point started: ret=0 14:38:26 point_skyscan result=0 14:38:27 Check angles 14:38:27 SkyScan query 14:38:28 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.015<-23401 Statuses=0009 0009 14:38:28 Msec=0 True Az=113.025 Ze=-171.015 Az status=0009 Ze status=0009 14:38:28 Check angles 14:38:28 SkyScan query 14:38:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:38:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:38:28 Message to Master queued w/err=0: serial=12519 error=0 14:38:33 Received message from Master: op=Filter serial=12520 14:38:33 Color wheel filter change from 0 to 0 14:38:33 FLIGetFilterPos err=0 currentPosition=0 14:38:33 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:33 Filter is already there-color wheel unchanged 14:38:33 Received message from Master: op=Shutter serial=12521 14:38:33 Shutter LASER open 14:38:34 Received message from Camera: op=State serial=12523 14:38:34 GetSingleValue result=40 Value=cccccccc 14:38:34 SkyScan query 14:38:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:38:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:34 Parameters OK 14:38:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:34 Set A/D data flow result=40 14:38:34 Set A/D channel type result=40 14:38:34 Set A/D encoding result=40 14:38:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:34 Set channel filter=0.000000e+000 result=40 14:38:34 Config A/D Result=40 14:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:34 Get A/D filter: -9.255963e+061 result=40 14:38:34 Get A/D value=-858993460 result=40 14:38:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:34 Parameters OK 14:38:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:34 Set A/D data flow result=40 14:38:34 Set A/D channel type result=40 14:38:34 Set A/D encoding result=40 14:38:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:34 Set channel filter=0.000000e+000 result=40 14:38:34 Config A/D Result=40 14:38:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:34 Get A/D filter: -9.255963e+061 result=40 14:38:34 Get A/D value=-858993460 result=40 14:38:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:34 Aux= 14:38:34 Message to Camera, serial 12523 queued 14:38:37 Received message from Master: op=Shutter serial=12527 14:38:37 Shutter LASER close 14:38:37 Received message from Master: op=PointingHead serial=12531 14:38:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:38:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:38:38 Point started: ret=0 14:38:38 point_skyscan result=0 14:38:38 Check angles 14:38:38 SkyScan query 14:38:39 SkyScan query done: ret=0 az=135.84<-9056 ze=-143.385<-21559 Statuses=0009 0009 14:38:39 Msec=0 True Az=135.84 Ze=-143.385 Az status=0009 Ze status=0009 14:38:39 Check angles 14:38:39 SkyScan query 14:38:40 SkyScan query done: ret=0 az=153.705<-10247 ze=-122.01<-20134 Statuses=0009 0009 14:38:40 Msec=750 True Az=153.705 Ze=-122.01 Az status=0009 Ze status=0009 14:38:40 Check angles 14:38:40 SkyScan query 14:38:41 SkyScan query done: ret=0 az=171.555<-11437 ze=-100.59<-18706 Statuses=0009 0009 14:38:41 Msec=1500 True Az=171.555 Ze=-100.59 Az status=0009 Ze status=0009 14:38:41 Check angles 14:38:41 SkyScan query 14:38:41 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.65<-17310 Statuses=0008 0009 14:38:41 Msec=2250 True Az=176.025 Ze=-79.65 Az status=0008 Ze status=0009 14:38:41 Check angles 14:38:41 SkyScan query 14:38:42 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.215<-15881 Statuses=0008 0009 14:38:42 Msec=3000 True Az=176.01 Ze=-58.215 Az status=0008 Ze status=0009 14:38:42 Check angles 14:38:42 SkyScan query 14:38:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:38:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:38:43 Message to Master queued w/err=0: serial=12531 error=0 14:38:48 Received message from Master: op=Filter serial=12532 14:38:48 Color wheel filter change from 0 to 0 14:38:48 FLIGetFilterPos err=0 currentPosition=0 14:38:48 FLIGetStepsRemaining err=0 RemainingSteps=0 14:38:48 Filter is already there-color wheel unchanged 14:38:48 Received message from Master: op=Shutter serial=12533 14:38:48 Shutter LASER close 14:38:48 Received message from Camera: op=State serial=12535 14:38:48 GetSingleValue result=40 Value=cccccccc 14:38:48 SkyScan query 14:38:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:38:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:49 Parameters OK 14:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:49 Set A/D data flow result=40 14:38:49 Set A/D channel type result=40 14:38:49 Set A/D encoding result=40 14:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:49 Set channel filter=0.000000e+000 result=40 14:38:49 Config A/D Result=40 14:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:49 Get A/D filter: -9.255963e+061 result=40 14:38:49 Get A/D value=-858993460 result=40 14:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:38:49 Parameters OK 14:38:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:38:49 Set A/D data flow result=40 14:38:49 Set A/D channel type result=40 14:38:49 Set A/D encoding result=40 14:38:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:38:49 Set channel filter=0.000000e+000 result=40 14:38:49 Config A/D Result=40 14:38:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:38:49 Get A/D filter: -9.255963e+061 result=40 14:38:49 Get A/D value=-858993460 result=40 14:38:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:38:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:38:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:38:49 Aux= 14:38:49 Message to Camera, serial 12535 queued 14:39:20 Received message from Master: op=PointingHead serial=12542 14:39:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:39:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:39:20 Point started: ret=0 14:39:20 point_skyscan result=0 14:39:21 Check angles 14:39:21 SkyScan query 14:39:21 SkyScan query done: ret=0 az=152.91<-10194 ze=-21.615<-13441 Statuses=0009 0009 14:39:21 Msec=0 True Az=152.91 Ze=-21.615 Az status=0009 Ze status=0009 14:39:21 Check angles 14:39:21 SkyScan query 14:39:22 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.66<-12044 Statuses=0009 0009 14:39:22 Msec=750 True Az=135.42 Ze=-0.66 Az status=0009 Ze status=0009 14:39:22 Check angles 14:39:22 SkyScan query 14:39:23 SkyScan query done: ret=0 az=117.78<-7852 ze=20.31<-10646 Statuses=0009 0009 14:39:23 Msec=1500 True Az=117.78 Ze=20.31 Az status=0009 Ze status=0009 14:39:23 Check angles 14:39:23 SkyScan query 14:39:24 SkyScan query done: ret=0 az=100.395<-6693 ze=41.25<-9250 Statuses=0009 0009 14:39:24 Msec=2250 True Az=100.395 Ze=41.25 Az status=0009 Ze status=0009 14:39:24 Check angles 14:39:24 SkyScan query 14:39:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:39:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:39:25 Check angles 14:39:25 SkyScan query 14:39:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:39:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:39:25 Message to Master queued w/err=0: serial=12542 error=0 14:39:30 Received message from Master: op=Filter serial=12543 14:39:30 Color wheel filter change from 0 to 0 14:39:30 FLIGetFilterPos err=0 currentPosition=0 14:39:30 FLIGetStepsRemaining err=0 RemainingSteps=0 14:39:30 Filter is already there-color wheel unchanged 14:39:30 Received message from Master: op=Shutter serial=12544 14:39:30 Shutter LASER close 14:39:30 Received message from Camera: op=State serial=12546 14:39:30 GetSingleValue result=40 Value=cccccccc 14:39:30 SkyScan query 14:39:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:39:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:31 Parameters OK 14:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:31 Set A/D data flow result=40 14:39:31 Set A/D channel type result=40 14:39:31 Set A/D encoding result=40 14:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:31 Set channel filter=0.000000e+000 result=40 14:39:31 Config A/D Result=40 14:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:31 Get A/D filter: -9.255963e+061 result=40 14:39:31 Get A/D value=-858993460 result=40 14:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:39:31 Parameters OK 14:39:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:39:31 Set A/D data flow result=40 14:39:31 Set A/D channel type result=40 14:39:31 Set A/D encoding result=40 14:39:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:39:31 Set channel filter=0.000000e+000 result=40 14:39:31 Config A/D Result=40 14:39:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:39:31 Get A/D filter: -9.255963e+061 result=40 14:39:31 Get A/D value=-858993460 result=40 14:39:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:39:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:39:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:39:31 Aux= 14:39:31 Message to Camera, serial 12546 queued 14:40:02 Received message from Master: op=PointingHead serial=12553 14:40:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:40:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:40:02 Point started: ret=0 14:40:02 point_skyscan result=0 14:40:03 Check angles 14:40:03 SkyScan query 14:40:03 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 14:40:03 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 14:40:04 Check angles 14:40:04 SkyScan query 14:40:04 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 14:40:04 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 14:40:04 Check angles 14:40:04 SkyScan query 14:40:05 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 14:40:05 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 14:40:05 Check angles 14:40:05 SkyScan query 14:40:06 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 14:40:06 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 14:40:06 Check angles 14:40:06 SkyScan query 14:40:06 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 14:40:06 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 14:40:07 Check angles 14:40:07 SkyScan query 14:40:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:40:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:40:07 Message to Master queued w/err=0: serial=12553 error=0 14:40:12 Received message from Master: op=Filter serial=12554 14:40:12 Color wheel filter change from 0 to 0 14:40:12 FLIGetFilterPos err=0 currentPosition=0 14:40:12 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:12 Filter is already there-color wheel unchanged 14:40:12 Received message from Master: op=Shutter serial=12555 14:40:12 Shutter LASER close 14:40:12 Received message from Camera: op=State serial=12557 14:40:12 GetSingleValue result=40 Value=cccccccc 14:40:12 SkyScan query 14:40:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:40:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:13 Parameters OK 14:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:13 Set A/D data flow result=40 14:40:13 Set A/D channel type result=40 14:40:13 Set A/D encoding result=40 14:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:13 Set channel filter=0.000000e+000 result=40 14:40:13 Config A/D Result=40 14:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:13 Get A/D filter: -9.255963e+061 result=40 14:40:13 Get A/D value=-858993460 result=40 14:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:13 Parameters OK 14:40:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:13 Set A/D data flow result=40 14:40:13 Set A/D channel type result=40 14:40:13 Set A/D encoding result=40 14:40:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:13 Set channel filter=0.000000e+000 result=40 14:40:13 Config A/D Result=40 14:40:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:13 Get A/D filter: -9.255963e+061 result=40 14:40:13 Get A/D value=-858993460 result=40 14:40:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:13 Aux= 14:40:13 Message to Camera, serial 12557 queued 14:40:44 Received message from Master: op=PointingHead serial=12564 14:40:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:40:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:40:44 Point started: ret=0 14:40:44 point_skyscan result=0 14:40:45 Check angles 14:40:45 SkyScan query 14:40:45 SkyScan query done: ret=0 az=152.61<-10174 ze=8.19<-11454 Statuses=0009 0009 14:40:45 Msec=0 True Az=152.61 Ze=8.19 Az status=0009 Ze status=0009 14:40:46 Check angles 14:40:46 SkyScan query 14:40:46 SkyScan query done: ret=0 az=134.64<-8976 ze=-13.245<-12883 Statuses=0009 0009 14:40:46 Msec=750 True Az=134.64 Ze=-13.245 Az status=0009 Ze status=0009 14:40:46 Check angles 14:40:46 SkyScan query 14:40:47 SkyScan query done: ret=0 az=117.255<-7817 ze=-34.17<-14278 Statuses=0009 0009 14:40:47 Msec=1500 True Az=117.255 Ze=-34.17 Az status=0009 Ze status=0009 14:40:47 Check angles 14:40:47 SkyScan query [UTC 2018-12-4 14:40:48] 14:40:48 SkyScan query done: ret=0 az=99.435<-6629 ze=-51.555<-15437 Statuses=0009 0009 14:40:48 Msec=2250 True Az=99.435 Ze=-51.555 Az status=0009 Ze status=0009 14:40:48 Check angles 14:40:48 SkyScan query 14:40:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 14:40:49 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 14:40:49 Check angles 14:40:49 SkyScan query 14:40:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:40:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:40:49 Message to Master queued w/err=0: serial=12564 error=0 14:40:54 Received message from Master: op=Filter serial=12565 14:40:54 Color wheel filter change from 0 to 0 14:40:54 FLIGetFilterPos err=0 currentPosition=0 14:40:54 FLIGetStepsRemaining err=0 RemainingSteps=0 14:40:54 Filter is already there-color wheel unchanged 14:40:54 Received message from Master: op=Shutter serial=12566 14:40:54 Shutter LASER close 14:40:54 Received message from Camera: op=State serial=12568 14:40:54 GetSingleValue result=40 Value=cccccccc 14:40:54 SkyScan query 14:40:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:40:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:55 Parameters OK 14:40:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:55 Set A/D data flow result=40 14:40:55 Set A/D channel type result=40 14:40:55 Set A/D encoding result=40 14:40:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:55 Set channel filter=0.000000e+000 result=40 14:40:55 Config A/D Result=40 14:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:55 Get A/D filter: -9.255963e+061 result=40 14:40:55 Get A/D value=-858993460 result=40 14:40:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:40:55 Parameters OK 14:40:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:40:55 Set A/D data flow result=40 14:40:55 Set A/D channel type result=40 14:40:55 Set A/D encoding result=40 14:40:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:40:55 Set channel filter=0.000000e+000 result=40 14:40:55 Config A/D Result=40 14:40:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:40:55 Get A/D filter: -9.255963e+061 result=40 14:40:55 Get A/D value=-858993460 result=40 14:40:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:40:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:40:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:40:55 Aux= 14:40:55 Message to Camera, serial 12568 queued 14:41:26 Received message from Master: op=PointingHead serial=12575 14:41:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:41:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:41:26 Point started: ret=0 14:41:26 point_skyscan result=0 14:41:27 Check angles 14:41:27 SkyScan query 14:41:28 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.12<-17408 Statuses=0009 0009 14:41:28 Msec=0 True Az=108.96 Ze=-81.12 Az status=0009 Ze status=0009 14:41:28 Check angles 14:41:28 SkyScan query 14:41:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.15<-18810 Statuses=0008 0009 14:41:28 Msec=750 True Az=112.995 Ze=-102.15 Az status=0008 Ze status=0009 14:41:29 Check angles 14:41:29 SkyScan query 14:41:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 14:41:29 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 14:41:29 Check angles 14:41:29 SkyScan query 14:41:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 14:41:30 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 14:41:30 Check angles 14:41:30 SkyScan query 14:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 14:41:31 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 14:41:31 Check angles 14:41:31 SkyScan query 14:41:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:41:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:41:31 Message to Master queued w/err=0: serial=12575 error=0 14:41:36 Received message from Master: op=Filter serial=12576 14:41:36 Color wheel filter change from 0 to 0 14:41:36 FLIGetFilterPos err=0 currentPosition=0 14:41:36 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:36 Filter is already there-color wheel unchanged 14:41:37 Received message from Master: op=Shutter serial=12577 14:41:37 Shutter LASER open 14:41:37 Received message from Camera: op=State serial=12579 14:41:37 GetSingleValue result=40 Value=cccccccc 14:41:37 SkyScan query 14:41:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:41:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:37 Parameters OK 14:41:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:37 Set A/D data flow result=40 14:41:37 Set A/D channel type result=40 14:41:37 Set A/D encoding result=40 14:41:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:37 Set channel filter=0.000000e+000 result=40 14:41:37 Config A/D Result=40 14:41:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:37 Get A/D filter: -9.255963e+061 result=40 14:41:37 Get A/D value=-858993460 result=40 14:41:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:37 Parameters OK 14:41:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:37 Set A/D data flow result=40 14:41:37 Set A/D channel type result=40 14:41:37 Set A/D encoding result=40 14:41:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:37 Set channel filter=0.000000e+000 result=40 14:41:37 Config A/D Result=40 14:41:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:37 Get A/D filter: -9.255963e+061 result=40 14:41:37 Get A/D value=-858993460 result=40 14:41:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:37 Aux= 14:41:37 Message to Camera, serial 12579 queued 14:41:40 Received message from Master: op=Shutter serial=12583 14:41:40 Shutter LASER close 14:41:40 Received message from Master: op=PointingHead serial=12587 14:41:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:41:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:41:40 Point started: ret=0 14:41:40 point_skyscan result=0 14:41:41 Check angles 14:41:41 SkyScan query 14:41:42 SkyScan query done: ret=0 az=89.685<-5979 ze=157.11<-1526 Statuses=0009 0009 14:41:42 Msec=0 True Az=89.685 Ze=157.11 Az status=0009 Ze status=0009 14:41:42 Check angles 14:41:42 SkyScan query 14:41:43 SkyScan query done: ret=0 az=72.345<-4823 ze=136.125<-2925 Statuses=0009 0009 14:41:43 Msec=750 True Az=72.345 Ze=136.125 Az status=0009 Ze status=0009 14:41:43 Check angles 14:41:43 SkyScan query 14:41:43 SkyScan query done: ret=0 az=54.675<-3645 ze=114.69<-4354 Statuses=0009 0009 14:41:43 Msec=1500 True Az=54.675 Ze=114.69 Az status=0009 Ze status=0009 14:41:44 Check angles 14:41:44 SkyScan query 14:41:44 SkyScan query done: ret=0 az=40.905<-2727 ze=93.75<-5750 Statuses=0009 0009 14:41:44 Msec=2250 True Az=40.905 Ze=93.75 Az status=0009 Ze status=0009 14:41:44 Check angles 14:41:44 SkyScan query 14:41:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.81<-7146 Statuses=0008 0009 14:41:45 Msec=3000 True Az=40.995 Ze=72.81 Az status=0008 Ze status=0009 14:41:45 Check angles 14:41:45 SkyScan query 14:41:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.23<-8518 Statuses=0008 0009 14:41:46 Msec=3750 True Az=40.995 Ze=52.23 Az status=0008 Ze status=0009 14:41:46 Check angles 14:41:46 SkyScan query 14:41:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:41:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:41:46 Message to Master queued w/err=0: serial=12587 error=0 14:41:51 Received message from Master: op=Filter serial=12588 14:41:51 Color wheel filter change from 0 to 0 14:41:51 FLIGetFilterPos err=0 currentPosition=0 14:41:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:41:51 Filter is already there-color wheel unchanged 14:41:52 Received message from Master: op=Shutter serial=12589 14:41:52 Shutter LASER close 14:41:52 Received message from Camera: op=State serial=12591 14:41:52 GetSingleValue result=40 Value=cccccccc 14:41:52 SkyScan query 14:41:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:41:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:52 Parameters OK 14:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:52 Set A/D data flow result=40 14:41:52 Set A/D channel type result=40 14:41:52 Set A/D encoding result=40 14:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:52 Set channel filter=0.000000e+000 result=40 14:41:52 Config A/D Result=40 14:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:52 Get A/D filter: -9.255963e+061 result=40 14:41:52 Get A/D value=-858993460 result=40 14:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:41:52 Parameters OK 14:41:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:41:52 Set A/D data flow result=40 14:41:52 Set A/D channel type result=40 14:41:52 Set A/D encoding result=40 14:41:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:41:52 Set channel filter=0.000000e+000 result=40 14:41:52 Config A/D Result=40 14:41:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:41:52 Get A/D filter: -9.255963e+061 result=40 14:41:52 Get A/D value=-858993460 result=40 14:41:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:41:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:41:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:41:52 Aux= 14:41:52 Message to Camera, serial 12591 queued 14:42:23 Received message from Master: op=PointingHead serial=12598 14:42:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:42:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:42:23 Point started: ret=0 14:42:23 point_skyscan result=0 14:42:24 Check angles 14:42:24 SkyScan query 14:42:25 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 14:42:25 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 14:42:25 Check angles 14:42:25 SkyScan query 14:42:26 SkyScan query done: ret=0 az=82.305<-5487 ze=66.495<-7567 Statuses=0009 0008 14:42:26 Msec=750 True Az=82.305 Ze=66.495 Az status=0009 Ze status=0008 14:42:26 Check angles 14:42:26 SkyScan query 14:42:26 SkyScan query done: ret=0 az=99.78<-6652 ze=66.495<-7567 Statuses=0009 0008 14:42:26 Msec=1500 True Az=99.78 Ze=66.495 Az status=0009 Ze status=0008 14:42:27 Check angles 14:42:27 SkyScan query 14:42:27 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 14:42:27 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 14:42:27 Check angles 14:42:27 SkyScan query 14:42:28 SkyScan query done: ret=0 az=134.7<-8980 ze=66.495<-7567 Statuses=0009 0008 14:42:28 Msec=3000 True Az=134.7 Ze=66.495 Az status=0009 Ze status=0008 14:42:28 Check angles 14:42:28 SkyScan query 14:42:29 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 14:42:29 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 14:42:29 Check angles 14:42:29 SkyScan query 14:42:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:42:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:42:29 Message to Master queued w/err=0: serial=12598 error=0 14:42:34 Received message from Master: op=Filter serial=12599 14:42:34 Color wheel filter change from 0 to 0 14:42:34 FLIGetFilterPos err=0 currentPosition=0 14:42:34 FLIGetStepsRemaining err=0 RemainingSteps=0 14:42:34 Filter is already there-color wheel unchanged 14:42:35 Received message from Master: op=Shutter serial=12600 14:42:35 Shutter LASER close 14:42:35 Received message from Camera: op=State serial=12602 14:42:35 GetSingleValue result=40 Value=cccccccc 14:42:35 SkyScan query 14:42:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:42:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:35 Parameters OK 14:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:35 Set A/D data flow result=40 14:42:35 Set A/D channel type result=40 14:42:35 Set A/D encoding result=40 14:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:35 Set channel filter=0.000000e+000 result=40 14:42:35 Config A/D Result=40 14:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:35 Get A/D filter: -9.255963e+061 result=40 14:42:35 Get A/D value=-858993460 result=40 14:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:42:35 Parameters OK 14:42:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:42:35 Set A/D data flow result=40 14:42:35 Set A/D channel type result=40 14:42:35 Set A/D encoding result=40 14:42:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:42:35 Set channel filter=0.000000e+000 result=40 14:42:35 Config A/D Result=40 14:42:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:42:35 Get A/D filter: -9.255963e+061 result=40 14:42:35 Get A/D value=-858993460 result=40 14:42:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:42:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:42:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:42:35 Aux= 14:42:35 Message to Camera, serial 12602 queued 14:43:06 Received message from Master: op=PointingHead serial=12609 14:43:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:43:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:43:06 Point started: ret=0 14:43:06 point_skyscan result=0 14:43:07 Check angles 14:43:07 SkyScan query 14:43:08 SkyScan query done: ret=0 az=134.43<-8962 ze=36.15<-9590 Statuses=0009 0009 14:43:08 Msec=0 True Az=134.43 Ze=36.15 Az status=0009 Ze status=0009 14:43:08 Check angles 14:43:08 SkyScan query 14:43:08 SkyScan query done: ret=0 az=116.58<-7772 ze=14.79<-11014 Statuses=0009 0009 14:43:08 Msec=750 True Az=116.58 Ze=14.79 Az status=0009 Ze status=0009 14:43:09 Check angles 14:43:09 SkyScan query 14:43:09 SkyScan query done: ret=0 az=99.135<-6609 ze=-6.165<-12411 Statuses=0009 0009 14:43:09 Msec=1500 True Az=99.135 Ze=-6.165 Az status=0009 Ze status=0009 14:43:09 Check angles 14:43:09 SkyScan query 14:43:10 SkyScan query done: ret=0 az=81.765<-5451 ze=-27.105<-13807 Statuses=0009 0009 14:43:10 Msec=2250 True Az=81.765 Ze=-27.105 Az status=0009 Ze status=0009 14:43:10 Check angles 14:43:10 SkyScan query 14:43:11 SkyScan query done: ret=0 az=64.11<-4274 ze=-38.565<-14571 Statuses=0009 0008 14:43:11 Msec=3000 True Az=64.11 Ze=-38.565 Az status=0009 Ze status=0008 14:43:11 Check angles 14:43:11 SkyScan query 14:43:11 SkyScan query done: ret=0 az=46.725<-3115 ze=-38.535<-14569 Statuses=0009 0008 14:43:11 Msec=3750 True Az=46.725 Ze=-38.535 Az status=0009 Ze status=0008 14:43:12 Check angles 14:43:12 SkyScan query 14:43:12 SkyScan query done: ret=0 az=41.01<-2734 ze=-38.505<-14567 Statuses=0008 0008 14:43:12 Msec=4500 True Az=41.01 Ze=-38.505 Az status=0008 Ze status=0008 14:43:12 Message to Master queued w/err=0: serial=12609 error=0 14:43:17 Received message from Master: op=Filter serial=12610 14:43:17 Color wheel filter change from 0 to 0 14:43:17 FLIGetFilterPos err=0 currentPosition=0 14:43:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:17 Filter is already there-color wheel unchanged 14:43:17 Received message from Master: op=Shutter serial=12611 14:43:17 Shutter LASER close 14:43:17 Received message from Camera: op=State serial=12613 14:43:17 GetSingleValue result=40 Value=cccccccc 14:43:17 SkyScan query 14:43:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:43:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:18 Parameters OK 14:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:18 Set A/D data flow result=40 14:43:18 Set A/D channel type result=40 14:43:18 Set A/D encoding result=40 14:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:18 Set channel filter=0.000000e+000 result=40 14:43:18 Config A/D Result=40 14:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:18 Get A/D filter: -9.255963e+061 result=40 14:43:18 Get A/D value=-858993460 result=40 14:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:43:18 Parameters OK 14:43:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:43:18 Set A/D data flow result=40 14:43:18 Set A/D channel type result=40 14:43:18 Set A/D encoding result=40 14:43:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:43:18 Set channel filter=0.000000e+000 result=40 14:43:18 Config A/D Result=40 14:43:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:43:18 Get A/D filter: -9.255963e+061 result=40 14:43:18 Get A/D value=-858993460 result=40 14:43:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:43:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:43:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:43:18 Aux= 14:43:18 Message to Camera, serial 12613 queued 14:43:49 Received message from Master: op=PointingHead serial=12620 14:43:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:43:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:43:49 Point started: ret=0 14:43:49 point_skyscan result=0 14:43:50 Check angles 14:43:50 SkyScan query 14:43:51 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.19<-16546 Statuses=0009 0009 14:43:51 Msec=0 True Az=63.81 Ze=-68.19 Az status=0009 Ze status=0009 14:43:51 Check angles 14:43:51 SkyScan query 14:43:51 SkyScan query done: ret=0 az=81.345<-5423 ze=-89.175<-17945 Statuses=0009 0009 14:43:51 Msec=750 True Az=81.345 Ze=-89.175 Az status=0009 Ze status=0009 14:43:51 Check angles 14:43:51 SkyScan query 14:43:52 SkyScan query done: ret=0 az=98.73<-6582 ze=-110.085<-19339 Statuses=0009 0009 14:43:52 Msec=1500 True Az=98.73 Ze=-110.085 Az status=0009 Ze status=0009 14:43:52 Check angles 14:43:52 SkyScan query 14:43:53 SkyScan query done: ret=0 az=116.19<-7746 ze=-131.055<-20737 Statuses=0009 0009 14:43:53 Msec=2250 True Az=116.19 Ze=-131.055 Az status=0009 Ze status=0009 14:43:53 Check angles 14:43:53 SkyScan query 14:43:54 SkyScan query done: ret=0 az=130.98<-8732 ze=-141.54<-21436 Statuses=0009 0008 14:43:54 Msec=3000 True Az=130.98 Ze=-141.54 Az status=0009 Ze status=0008 14:43:54 Check angles 14:43:54 SkyScan query 14:43:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 14:43:54 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 14:43:54 Message to Master queued w/err=0: serial=12620 error=0 14:43:59 Received message from Master: op=Filter serial=12621 14:43:59 Color wheel filter change from 0 to 0 14:43:59 FLIGetFilterPos err=0 currentPosition=0 14:43:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:43:59 Filter is already there-color wheel unchanged 14:43:59 Received message from Master: op=Shutter serial=12622 14:43:59 Shutter LASER close 14:44:00 Received message from Camera: op=State serial=12624 14:44:00 GetSingleValue result=40 Value=cccccccc 14:44:00 SkyScan query 14:44:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:44:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:00 Parameters OK 14:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:00 Set A/D data flow result=40 14:44:00 Set A/D channel type result=40 14:44:00 Set A/D encoding result=40 14:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:00 Set channel filter=0.000000e+000 result=40 14:44:00 Config A/D Result=40 14:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:00 Get A/D filter: -9.255963e+061 result=40 14:44:00 Get A/D value=-858993460 result=40 14:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:00 Parameters OK 14:44:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:00 Set A/D data flow result=40 14:44:00 Set A/D channel type result=40 14:44:00 Set A/D encoding result=40 14:44:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:00 Set channel filter=0.000000e+000 result=40 14:44:00 Config A/D Result=40 14:44:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:00 Get A/D filter: -9.255963e+061 result=40 14:44:00 Get A/D value=-858993460 result=40 14:44:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:00 Aux= 14:44:00 Message to Camera, serial 12624 queued 14:44:31 Received message from Master: op=PointingHead serial=12631 14:44:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:44:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:44:31 Point started: ret=0 14:44:31 point_skyscan result=0 14:44:32 Check angles 14:44:32 SkyScan query 14:44:33 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.97<-23398 Statuses=0009 0009 14:44:33 Msec=0 True Az=113.025 Ze=-170.97 Az status=0009 Ze status=0009 14:44:33 Check angles 14:44:33 SkyScan query 14:44:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:44:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:44:33 Message to Master queued w/err=0: serial=12631 error=0 14:44:38 Received message from Master: op=Filter serial=12632 14:44:38 Color wheel filter change from 0 to 0 14:44:38 FLIGetFilterPos err=0 currentPosition=0 14:44:38 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:38 Filter is already there-color wheel unchanged 14:44:39 Received message from Master: op=Shutter serial=12633 14:44:39 Shutter LASER open 14:44:39 Received message from Camera: op=State serial=12635 14:44:39 GetSingleValue result=40 Value=cccccccc 14:44:39 SkyScan query 14:44:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:44:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:39 Parameters OK 14:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:39 Set A/D data flow result=40 14:44:39 Set A/D channel type result=40 14:44:39 Set A/D encoding result=40 14:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:39 Set channel filter=0.000000e+000 result=40 14:44:39 Config A/D Result=40 14:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:39 Get A/D filter: -9.255963e+061 result=40 14:44:39 Get A/D value=-858993460 result=40 14:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:39 Parameters OK 14:44:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:39 Set A/D data flow result=40 14:44:39 Set A/D channel type result=40 14:44:39 Set A/D encoding result=40 14:44:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:39 Set channel filter=0.000000e+000 result=40 14:44:39 Config A/D Result=40 14:44:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:39 Get A/D filter: -9.255963e+061 result=40 14:44:39 Get A/D value=-858993460 result=40 14:44:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:39 Aux= 14:44:39 Message to Camera, serial 12635 queued 14:44:42 Received message from Master: op=Shutter serial=12639 14:44:42 Shutter LASER close 14:44:42 Received message from Master: op=PointingHead serial=12643 14:44:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:44:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:44:43 Point started: ret=0 14:44:43 point_skyscan result=0 14:44:44 Check angles 14:44:44 SkyScan query 14:44:44 SkyScan query done: ret=0 az=136.38<-9092 ze=-142.725<-21515 Statuses=0009 0009 14:44:44 Msec=0 True Az=136.38 Ze=-142.725 Az status=0009 Ze status=0009 14:44:44 Check angles 14:44:44 SkyScan query 14:44:45 SkyScan query done: ret=0 az=153.855<-10257 ze=-121.755<-20117 Statuses=0009 0009 14:44:45 Msec=750 True Az=153.855 Ze=-121.755 Az status=0009 Ze status=0009 14:44:45 Check angles 14:44:45 SkyScan query 14:44:46 SkyScan query done: ret=0 az=171.705<-11447 ze=-100.35<-18690 Statuses=0009 0009 14:44:46 Msec=1500 True Az=171.705 Ze=-100.35 Az status=0009 Ze status=0009 14:44:46 Check angles 14:44:46 SkyScan query 14:44:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.41<-17294 Statuses=0008 0009 14:44:46 Msec=2250 True Az=176.025 Ze=-79.41 Az status=0008 Ze status=0009 14:44:47 Check angles 14:44:47 SkyScan query 14:44:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.44<-15896 Statuses=0008 0009 14:44:47 Msec=3000 True Az=175.995 Ze=-58.44 Az status=0008 Ze status=0009 14:44:47 Check angles 14:44:47 SkyScan query 14:44:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:44:48 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:44:48 Message to Master queued w/err=0: serial=12643 error=0 14:44:53 Received message from Master: op=Filter serial=12644 14:44:53 Color wheel filter change from 0 to 0 14:44:53 FLIGetFilterPos err=0 currentPosition=0 14:44:53 FLIGetStepsRemaining err=0 RemainingSteps=0 14:44:53 Filter is already there-color wheel unchanged 14:44:53 Received message from Master: op=Shutter serial=12645 14:44:53 Shutter LASER close 14:44:53 Received message from Camera: op=State serial=12647 14:44:53 GetSingleValue result=40 Value=cccccccc 14:44:53 SkyScan query 14:44:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:44:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:54 Parameters OK 14:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:54 Set A/D data flow result=40 14:44:54 Set A/D channel type result=40 14:44:54 Set A/D encoding result=40 14:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:54 Set channel filter=0.000000e+000 result=40 14:44:54 Config A/D Result=40 14:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:54 Get A/D filter: -9.255963e+061 result=40 14:44:54 Get A/D value=-858993460 result=40 14:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:44:54 Parameters OK 14:44:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:44:54 Set A/D data flow result=40 14:44:54 Set A/D channel type result=40 14:44:54 Set A/D encoding result=40 14:44:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:44:54 Set channel filter=0.000000e+000 result=40 14:44:54 Config A/D Result=40 14:44:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:44:54 Get A/D filter: -9.255963e+061 result=40 14:44:54 Get A/D value=-858993460 result=40 14:44:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:44:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:44:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:44:54 Aux= 14:44:54 Message to Camera, serial 12647 queued 14:45:25 Received message from Master: op=PointingHead serial=12654 14:45:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:45:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:45:25 Point started: ret=0 14:45:25 point_skyscan result=0 14:45:26 Check angles 14:45:26 SkyScan query 14:45:26 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.81<-13454 Statuses=0009 0009 14:45:26 Msec=0 True Az=152.97 Ze=-21.81 Az status=0009 Ze status=0009 14:45:26 Check angles 14:45:26 SkyScan query 14:45:27 SkyScan query done: ret=0 az=135.6<-9040 ze=-0.84<-12056 Statuses=0009 0009 14:45:27 Msec=750 True Az=135.6 Ze=-0.84 Az status=0009 Ze status=0009 14:45:27 Check angles 14:45:27 SkyScan query 14:45:28 SkyScan query done: ret=0 az=118.035<-7869 ze=20.13<-10658 Statuses=0009 0009 14:45:28 Msec=1500 True Az=118.035 Ze=20.13 Az status=0009 Ze status=0009 14:45:28 Check angles 14:45:28 SkyScan query 14:45:29 SkyScan query done: ret=0 az=100.215<-6681 ze=41.49<-9234 Statuses=0009 0009 14:45:29 Msec=2250 True Az=100.215 Ze=41.49 Az status=0009 Ze status=0009 14:45:29 Check angles 14:45:29 SkyScan query 14:45:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 14:45:29 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 14:45:29 Check angles 14:45:29 SkyScan query 14:45:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:45:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:45:30 Message to Master queued w/err=0: serial=12654 error=0 14:45:35 Received message from Master: op=Filter serial=12655 14:45:35 Color wheel filter change from 0 to 0 14:45:35 FLIGetFilterPos err=0 currentPosition=0 14:45:35 FLIGetStepsRemaining err=0 RemainingSteps=0 14:45:35 Filter is already there-color wheel unchanged 14:45:35 Received message from Master: op=Shutter serial=12656 14:45:35 Shutter LASER close 14:45:35 Received message from Camera: op=State serial=12658 14:45:35 GetSingleValue result=40 Value=cccccccc 14:45:35 SkyScan query 14:45:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:45:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:36 Parameters OK 14:45:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:36 Set A/D data flow result=40 14:45:36 Set A/D channel type result=40 14:45:36 Set A/D encoding result=40 14:45:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:36 Set channel filter=0.000000e+000 result=40 14:45:36 Config A/D Result=40 14:45:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:36 Get A/D filter: -9.255963e+061 result=40 14:45:36 Get A/D value=-858993460 result=40 14:45:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:45:36 Parameters OK 14:45:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:45:36 Set A/D data flow result=40 14:45:36 Set A/D channel type result=40 14:45:36 Set A/D encoding result=40 14:45:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:45:36 Set channel filter=0.000000e+000 result=40 14:45:36 Config A/D Result=40 14:45:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:45:36 Get A/D filter: -9.255963e+061 result=40 14:45:36 Get A/D value=-858993460 result=40 14:45:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:45:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:45:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:45:36 Aux= 14:45:36 Message to Camera, serial 12658 queued 14:46:07 Received message from Master: op=PointingHead serial=12665 14:46:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:46:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:46:07 Point started: ret=0 14:46:07 point_skyscan result=0 14:46:08 Check angles 14:46:08 SkyScan query 14:46:08 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 14:46:08 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 14:46:09 Check angles 14:46:09 SkyScan query 14:46:09 SkyScan query done: ret=0 az=126.855<-8457 ze=38.505<-9433 Statuses=0009 0008 14:46:09 Msec=750 True Az=126.855 Ze=38.505 Az status=0009 Ze status=0008 14:46:09 Check angles 14:46:09 SkyScan query 14:46:10 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 14:46:10 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 14:46:10 Check angles 14:46:10 SkyScan query 14:46:11 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 14:46:11 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 14:46:11 Check angles 14:46:11 SkyScan query 14:46:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 14:46:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 14:46:12 Check angles 14:46:12 SkyScan query 14:46:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:46:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:46:12 Message to Master queued w/err=0: serial=12665 error=0 14:46:17 Received message from Master: op=Filter serial=12666 14:46:17 Color wheel filter change from 0 to 0 14:46:17 FLIGetFilterPos err=0 currentPosition=0 14:46:17 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:17 Filter is already there-color wheel unchanged 14:46:17 Received message from Master: op=Shutter serial=12667 14:46:17 Shutter LASER close 14:46:17 Received message from Camera: op=State serial=12669 14:46:17 GetSingleValue result=40 Value=cccccccc 14:46:17 SkyScan query 14:46:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:46:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:18 Parameters OK 14:46:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:18 Set A/D data flow result=40 14:46:18 Set A/D channel type result=40 14:46:18 Set A/D encoding result=40 14:46:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:18 Set channel filter=0.000000e+000 result=40 14:46:18 Config A/D Result=40 14:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:18 Get A/D filter: -9.255963e+061 result=40 14:46:18 Get A/D value=-858993460 result=40 14:46:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:46:18 Parameters OK 14:46:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:46:18 Set A/D data flow result=40 14:46:18 Set A/D channel type result=40 14:46:18 Set A/D encoding result=40 14:46:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:46:18 Set channel filter=0.000000e+000 result=40 14:46:18 Config A/D Result=40 14:46:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:46:18 Get A/D filter: -9.255963e+061 result=40 14:46:18 Get A/D value=-858993460 result=40 14:46:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:46:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:46:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:46:18 Aux= 14:46:18 Message to Camera, serial 12669 queued 14:46:49 Received message from Master: op=PointingHead serial=12676 14:46:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:46:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:46:49 Point started: ret=0 14:46:49 point_skyscan result=0 14:46:50 Check angles 14:46:50 SkyScan query 14:46:50 SkyScan query done: ret=0 az=152.79<-10186 ze=8.385<-11441 Statuses=0009 0009 14:46:50 Msec=0 True Az=152.79 Ze=8.385 Az status=0009 Ze status=0009 14:46:51 Check angles 14:46:51 SkyScan query 14:46:51 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.585<-12839 Statuses=0009 0009 14:46:51 Msec=750 True Az=135.24 Ze=-12.585 Az status=0009 Ze status=0009 14:46:51 Check angles 14:46:51 SkyScan query 14:46:52 SkyScan query done: ret=0 az=117.78<-7852 ze=-33.51<-14234 Statuses=0009 0009 14:46:52 Msec=1500 True Az=117.78 Ze=-33.51 Az status=0009 Ze status=0009 14:46:52 Check angles 14:46:52 SkyScan query 14:46:53 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 14:46:53 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 14:46:53 Check angles 14:46:53 SkyScan query 14:46:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.54<-15436 Statuses=0009 0008 14:46:54 Msec=3000 True Az=85.995 Ze=-51.54 Az status=0009 Ze status=0008 14:46:54 Check angles 14:46:54 SkyScan query 14:46:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 14:46:54 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 14:46:54 Message to Master queued w/err=0: serial=12676 error=0 14:46:59 Received message from Master: op=Filter serial=12677 14:46:59 Color wheel filter change from 0 to 0 14:46:59 FLIGetFilterPos err=0 currentPosition=0 14:46:59 FLIGetStepsRemaining err=0 RemainingSteps=0 14:46:59 Filter is already there-color wheel unchanged 14:46:59 Received message from Master: op=Shutter serial=12678 14:46:59 Shutter LASER close 14:46:59 Received message from Camera: op=State serial=12680 14:46:59 GetSingleValue result=40 Value=cccccccc 14:46:59 SkyScan query 14:47:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:47:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:00 Parameters OK 14:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:00 Set A/D data flow result=40 14:47:00 Set A/D channel type result=40 14:47:00 Set A/D encoding result=40 14:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:00 Set channel filter=0.000000e+000 result=40 14:47:00 Config A/D Result=40 14:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:00 Get A/D filter: -9.255963e+061 result=40 14:47:00 Get A/D value=-858993460 result=40 14:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:00 Parameters OK 14:47:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:00 Set A/D data flow result=40 14:47:00 Set A/D channel type result=40 14:47:00 Set A/D encoding result=40 14:47:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:00 Set channel filter=0.000000e+000 result=40 14:47:00 Config A/D Result=40 14:47:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:00 Get A/D filter: -9.255963e+061 result=40 14:47:00 Get A/D value=-858993460 result=40 14:47:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:00 Aux= 14:47:00 Message to Camera, serial 12680 queued 14:47:31 Received message from Master: op=PointingHead serial=12687 14:47:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:47:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:47:31 Point started: ret=0 14:47:31 point_skyscan result=0 14:47:32 Check angles 14:47:32 SkyScan query 14:47:33 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.36<-17424 Statuses=0009 0009 14:47:33 Msec=0 True Az=109.155 Ze=-81.36 Az status=0009 Ze status=0009 14:47:33 Check angles 14:47:33 SkyScan query 14:47:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 14:47:33 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 14:47:34 Check angles 14:47:34 SkyScan query 14:47:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.675<-20245 Statuses=0008 0009 14:47:34 Msec=1500 True Az=112.995 Ze=-123.675 Az status=0008 Ze status=0009 14:47:34 Check angles 14:47:34 SkyScan query 14:47:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.645<-21643 Statuses=0008 0009 14:47:35 Msec=2250 True Az=112.995 Ze=-144.645 Az status=0008 Ze status=0009 14:47:35 Check angles 14:47:35 SkyScan query 14:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.005<-23067 Statuses=0008 0009 14:47:36 Msec=3000 True Az=112.995 Ze=-166.005 Az status=0008 Ze status=0009 14:47:36 Check angles 14:47:36 SkyScan query 14:47:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:47:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:47:36 Message to Master queued w/err=0: serial=12687 error=0 14:47:41 Received message from Master: op=Filter serial=12688 14:47:41 Color wheel filter change from 0 to 0 14:47:41 FLIGetFilterPos err=0 currentPosition=0 14:47:41 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:41 Filter is already there-color wheel unchanged 14:47:42 Received message from Master: op=Shutter serial=12689 14:47:42 Shutter LASER open 14:47:42 Received message from Camera: op=State serial=12691 14:47:42 GetSingleValue result=40 Value=cccccccc 14:47:42 SkyScan query 14:47:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:47:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:42 Parameters OK 14:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:42 Set A/D data flow result=40 14:47:42 Set A/D channel type result=40 14:47:42 Set A/D encoding result=40 14:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:42 Set channel filter=0.000000e+000 result=40 14:47:42 Config A/D Result=40 14:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:42 Get A/D filter: -9.255963e+061 result=40 14:47:42 Get A/D value=-858993460 result=40 14:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:42 Parameters OK 14:47:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:42 Set A/D data flow result=40 14:47:42 Set A/D channel type result=40 14:47:42 Set A/D encoding result=40 14:47:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:42 Set channel filter=0.000000e+000 result=40 14:47:42 Config A/D Result=40 14:47:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:42 Get A/D filter: -9.255963e+061 result=40 14:47:42 Get A/D value=-858993460 result=40 14:47:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:42 Aux= 14:47:42 Message to Camera, serial 12691 queued 14:47:45 Received message from Master: op=Shutter serial=12695 14:47:45 Shutter LASER close 14:47:45 Received message from Master: op=PointingHead serial=12699 14:47:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:47:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:47:46 Point started: ret=0 14:47:46 point_skyscan result=0 14:47:46 Check angles 14:47:46 SkyScan query 14:47:47 SkyScan query done: ret=0 az=89.625<-5975 ze=156.96<-1536 Statuses=0009 0009 14:47:47 Msec=0 True Az=89.625 Ze=156.96 Az status=0009 Ze status=0009 14:47:47 Check angles 14:47:47 SkyScan query 14:47:48 SkyScan query done: ret=0 az=71.73<-4782 ze=135.525<-2965 Statuses=0009 0009 14:47:48 Msec=750 True Az=71.73 Ze=135.525 Az status=0009 Ze status=0009 14:47:48 Check angles 14:47:48 SkyScan query 14:47:48 SkyScan query done: ret=0 az=54.495<-3633 ze=114.6<-4360 Statuses=0009 0009 14:47:48 Msec=1500 True Az=54.495 Ze=114.6 Az status=0009 Ze status=0009 14:47:49 Check angles 14:47:49 SkyScan query 14:47:49 SkyScan query done: ret=0 az=40.92<-2728 ze=93.63<-5758 Statuses=0009 0009 14:47:49 Msec=2250 True Az=40.92 Ze=93.63 Az status=0009 Ze status=0009 14:47:49 Check angles 14:47:49 SkyScan query 14:47:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.24<-7184 Statuses=0008 0009 14:47:50 Msec=3000 True Az=40.995 Ze=72.24 Az status=0008 Ze status=0009 14:47:50 Check angles 14:47:50 SkyScan query 14:47:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.155<-8523 Statuses=0008 0009 14:47:51 Msec=3750 True Az=40.995 Ze=52.155 Az status=0008 Ze status=0009 14:47:51 Check angles 14:47:51 SkyScan query 14:47:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:47:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:47:51 Message to Master queued w/err=0: serial=12699 error=0 14:47:56 Received message from Master: op=Filter serial=12700 14:47:56 Color wheel filter change from 0 to 0 14:47:56 FLIGetFilterPos err=0 currentPosition=0 14:47:56 FLIGetStepsRemaining err=0 RemainingSteps=0 14:47:56 Filter is already there-color wheel unchanged 14:47:57 Received message from Master: op=Shutter serial=12701 14:47:57 Shutter LASER close 14:47:57 Received message from Camera: op=State serial=12703 14:47:57 GetSingleValue result=40 Value=cccccccc 14:47:57 SkyScan query 14:47:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:47:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:57 Parameters OK 14:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:57 Set A/D data flow result=40 14:47:57 Set A/D channel type result=40 14:47:57 Set A/D encoding result=40 14:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:57 Set channel filter=0.000000e+000 result=40 14:47:57 Config A/D Result=40 14:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:57 Get A/D filter: -9.255963e+061 result=40 14:47:57 Get A/D value=-858993460 result=40 14:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:47:57 Parameters OK 14:47:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:47:57 Set A/D data flow result=40 14:47:57 Set A/D channel type result=40 14:47:57 Set A/D encoding result=40 14:47:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:47:57 Set channel filter=0.000000e+000 result=40 14:47:57 Config A/D Result=40 14:47:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:47:57 Get A/D filter: -9.255963e+061 result=40 14:47:57 Get A/D value=-858993460 result=40 14:47:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:47:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:47:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:47:57 Aux= 14:47:57 Message to Camera, serial 12703 queued 14:48:28 Received message from Master: op=PointingHead serial=12710 14:48:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:48:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:48:28 Point started: ret=0 14:48:28 point_skyscan result=0 14:48:29 Check angles 14:48:29 SkyScan query 14:48:30 SkyScan query done: ret=0 az=63.975<-4265 ze=66.555<-7563 Statuses=0009 0008 14:48:30 Msec=0 True Az=63.975 Ze=66.555 Az status=0009 Ze status=0008 14:48:30 Check angles 14:48:30 SkyScan query 14:48:31 SkyScan query done: ret=0 az=82.065<-5471 ze=66.495<-7567 Statuses=0009 0008 14:48:31 Msec=750 True Az=82.065 Ze=66.495 Az status=0009 Ze status=0008 14:48:31 Check angles 14:48:31 SkyScan query 14:48:31 SkyScan query done: ret=0 az=99.54<-6636 ze=66.495<-7567 Statuses=0009 0008 14:48:31 Msec=1500 True Az=99.54 Ze=66.495 Az status=0009 Ze status=0008 14:48:32 Check angles 14:48:32 SkyScan query 14:48:32 SkyScan query done: ret=0 az=117.3<-7820 ze=66.495<-7567 Statuses=0009 0008 14:48:32 Msec=2250 True Az=117.3 Ze=66.495 Az status=0009 Ze status=0008 14:48:32 Check angles 14:48:32 SkyScan query 14:48:33 SkyScan query done: ret=0 az=135.15<-9010 ze=66.495<-7567 Statuses=0009 0008 14:48:33 Msec=3000 True Az=135.15 Ze=66.495 Az status=0009 Ze status=0008 14:48:33 Check angles 14:48:33 SkyScan query 14:48:34 SkyScan query done: ret=0 az=152.835<-10189 ze=66.495<-7567 Statuses=0009 0008 14:48:34 Msec=3750 True Az=152.835 Ze=66.495 Az status=0009 Ze status=0008 14:48:34 Check angles 14:48:34 SkyScan query 14:48:34 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:48:34 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:48:34 Message to Master queued w/err=0: serial=12710 error=0 14:48:39 Received message from Master: op=Filter serial=12711 14:48:39 Color wheel filter change from 0 to 0 14:48:39 FLIGetFilterPos err=0 currentPosition=0 14:48:39 FLIGetStepsRemaining err=0 RemainingSteps=0 14:48:39 Filter is already there-color wheel unchanged 14:48:40 Received message from Master: op=Shutter serial=12712 14:48:40 Shutter LASER close 14:48:40 Received message from Camera: op=State serial=12714 14:48:40 GetSingleValue result=40 Value=cccccccc 14:48:40 SkyScan query 14:48:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:48:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:40 Parameters OK 14:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:40 Set A/D data flow result=40 14:48:40 Set A/D channel type result=40 14:48:40 Set A/D encoding result=40 14:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:40 Set channel filter=0.000000e+000 result=40 14:48:40 Config A/D Result=40 14:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:40 Get A/D filter: -9.255963e+061 result=40 14:48:40 Get A/D value=-858993460 result=40 14:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:48:40 Parameters OK 14:48:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:48:40 Set A/D data flow result=40 14:48:40 Set A/D channel type result=40 14:48:40 Set A/D encoding result=40 14:48:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:48:40 Set channel filter=0.000000e+000 result=40 14:48:40 Config A/D Result=40 14:48:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:48:40 Get A/D filter: -9.255963e+061 result=40 14:48:40 Get A/D value=-858993460 result=40 14:48:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:48:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:48:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:48:40 Aux= 14:48:40 Message to Camera, serial 12714 queued 14:49:11 Received message from Master: op=PointingHead serial=12721 14:49:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:49:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:49:11 Point started: ret=0 14:49:11 point_skyscan result=0 14:49:12 Check angles 14:49:12 SkyScan query 14:49:13 SkyScan query done: ret=0 az=134.58<-8972 ze=36.18<-9588 Statuses=0009 0009 14:49:13 Msec=0 True Az=134.58 Ze=36.18 Az status=0009 Ze status=0009 14:49:13 Check angles 14:49:13 SkyScan query 14:49:14 SkyScan query done: ret=0 az=116.625<-7775 ze=14.82<-11012 Statuses=0009 0009 14:49:14 Msec=750 True Az=116.625 Ze=14.82 Az status=0009 Ze status=0009 14:49:14 Check angles [UTC 2018-12-4 14:49:14] 14:49:14 SkyScan query 14:49:14 SkyScan query done: ret=0 az=97.485<-6499 ze=-8.325<-12555 Statuses=0009 0009 14:49:14 Msec=1500 True Az=97.485 Ze=-8.325 Az status=0009 Ze status=0009 14:49:14 Check angles 14:49:14 SkyScan query 14:49:15 SkyScan query done: ret=0 az=81.525<-5435 ze=-27.54<-13836 Statuses=0009 0009 14:49:15 Msec=2250 True Az=81.525 Ze=-27.54 Az status=0009 Ze status=0009 14:49:15 Check angles 14:49:15 SkyScan query 14:49:16 SkyScan query done: ret=0 az=63.945<-4263 ze=-38.565<-14571 Statuses=0009 0008 14:49:16 Msec=3000 True Az=63.945 Ze=-38.565 Az status=0009 Ze status=0008 14:49:16 Check angles 14:49:16 SkyScan query 14:49:17 SkyScan query done: ret=0 az=46.47<-3098 ze=-38.535<-14569 Statuses=0009 0008 14:49:17 Msec=3750 True Az=46.47 Ze=-38.535 Az status=0009 Ze status=0008 14:49:17 Check angles 14:49:17 SkyScan query 14:49:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:49:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:49:17 Message to Master queued w/err=0: serial=12721 error=0 14:49:22 Received message from Master: op=Filter serial=12722 14:49:22 Color wheel filter change from 0 to 0 14:49:22 FLIGetFilterPos err=0 currentPosition=0 14:49:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:49:22 Filter is already there-color wheel unchanged 14:49:22 Received message from Master: op=Shutter serial=12723 14:49:22 Shutter LASER close 14:49:22 Received message from Camera: op=State serial=12725 14:49:22 GetSingleValue result=40 Value=cccccccc 14:49:22 SkyScan query 14:49:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:49:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:23 Parameters OK 14:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:23 Set A/D data flow result=40 14:49:23 Set A/D channel type result=40 14:49:23 Set A/D encoding result=40 14:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:23 Set channel filter=0.000000e+000 result=40 14:49:23 Config A/D Result=40 14:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:23 Get A/D filter: -9.255963e+061 result=40 14:49:23 Get A/D value=-858993460 result=40 14:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:49:23 Parameters OK 14:49:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:49:23 Set A/D data flow result=40 14:49:23 Set A/D channel type result=40 14:49:23 Set A/D encoding result=40 14:49:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:49:23 Set channel filter=0.000000e+000 result=40 14:49:23 Config A/D Result=40 14:49:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:49:23 Get A/D filter: -9.255963e+061 result=40 14:49:23 Get A/D value=-858993460 result=40 14:49:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:49:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:49:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:49:23 Aux= 14:49:23 Message to Camera, serial 12725 queued 14:49:54 Received message from Master: op=PointingHead serial=12732 14:49:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:49:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:49:54 Point started: ret=0 14:49:54 point_skyscan result=0 14:49:55 Check angles 14:49:55 SkyScan query 14:49:56 SkyScan query done: ret=0 az=63.945<-4263 ze=-68.34<-16556 Statuses=0009 0009 14:49:56 Msec=0 True Az=63.945 Ze=-68.34 Az status=0009 Ze status=0009 14:49:56 Check angles 14:49:56 SkyScan query 14:49:56 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.31<-17954 Statuses=0009 0009 14:49:56 Msec=750 True Az=81.54 Ze=-89.31 Az status=0009 Ze status=0009 14:49:57 Check angles 14:49:57 SkyScan query 14:49:57 SkyScan query done: ret=0 az=99.465<-6631 ze=-110.685<-19379 Statuses=0009 0009 14:49:57 Msec=1500 True Az=99.465 Ze=-110.685 Az status=0009 Ze status=0009 14:49:57 Check angles 14:49:57 SkyScan query 14:49:58 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.64<-20776 Statuses=0009 0009 14:49:58 Msec=2250 True Az=116.835 Ze=-131.64 Az status=0009 Ze status=0009 14:49:58 Check angles 14:49:58 SkyScan query 14:49:59 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.525<-21435 Statuses=0009 0008 14:49:59 Msec=3000 True Az=131.1 Ze=-141.525 Az status=0009 Ze status=0008 14:49:59 Check angles 14:49:59 SkyScan query 14:49:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:49:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:49:59 Message to Master queued w/err=0: serial=12732 error=0 14:50:04 Received message from Master: op=Filter serial=12733 14:50:04 Color wheel filter change from 0 to 0 14:50:04 FLIGetFilterPos err=0 currentPosition=0 14:50:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:04 Filter is already there-color wheel unchanged 14:50:05 Received message from Master: op=Shutter serial=12734 14:50:05 Shutter LASER close 14:50:05 Received message from Camera: op=State serial=12736 14:50:05 GetSingleValue result=40 Value=cccccccc 14:50:05 SkyScan query 14:50:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:50:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:05 Parameters OK 14:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:05 Set A/D data flow result=40 14:50:05 Set A/D channel type result=40 14:50:05 Set A/D encoding result=40 14:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:05 Set channel filter=0.000000e+000 result=40 14:50:05 Config A/D Result=40 14:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:05 Get A/D filter: -9.255963e+061 result=40 14:50:05 Get A/D value=-858993460 result=40 14:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:05 Parameters OK 14:50:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:05 Set A/D data flow result=40 14:50:05 Set A/D channel type result=40 14:50:05 Set A/D encoding result=40 14:50:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:05 Set channel filter=0.000000e+000 result=40 14:50:05 Config A/D Result=40 14:50:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:05 Get A/D filter: -9.255963e+061 result=40 14:50:05 Get A/D value=-858993460 result=40 14:50:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:05 Aux= 14:50:05 Message to Camera, serial 12736 queued 14:50:36 Received message from Master: op=PointingHead serial=12743 14:50:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:50:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:50:36 Point started: ret=0 14:50:36 point_skyscan result=0 14:50:37 Check angles 14:50:37 SkyScan query 14:50:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.12<-23408 Statuses=0009 0009 14:50:38 Msec=0 True Az=113.01 Ze=-171.12 Az status=0009 Ze status=0009 14:50:38 Check angles 14:50:38 SkyScan query 14:50:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:50:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:50:39 Message to Master queued w/err=0: serial=12743 error=0 14:50:44 Received message from Master: op=Filter serial=12744 14:50:44 Color wheel filter change from 0 to 0 14:50:44 FLIGetFilterPos err=0 currentPosition=0 14:50:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:44 Filter is already there-color wheel unchanged 14:50:44 Received message from Master: op=Shutter serial=12745 14:50:44 Shutter LASER open 14:50:44 Received message from Camera: op=State serial=12747 14:50:44 GetSingleValue result=40 Value=cccccccc 14:50:44 SkyScan query 14:50:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:50:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:45 Parameters OK 14:50:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:45 Set A/D data flow result=40 14:50:45 Set A/D channel type result=40 14:50:45 Set A/D encoding result=40 14:50:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:45 Set channel filter=0.000000e+000 result=40 14:50:45 Config A/D Result=40 14:50:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:45 Get A/D filter: -9.255963e+061 result=40 14:50:45 Get A/D value=-858993460 result=40 14:50:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:45 Parameters OK 14:50:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:45 Set A/D data flow result=40 14:50:45 Set A/D channel type result=40 14:50:45 Set A/D encoding result=40 14:50:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:45 Set channel filter=0.000000e+000 result=40 14:50:45 Config A/D Result=40 14:50:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:45 Get A/D filter: -9.255963e+061 result=40 14:50:45 Get A/D value=-858993460 result=40 14:50:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:45 Aux= 14:50:45 Message to Camera, serial 12747 queued 14:50:47 Received message from Master: op=Shutter serial=12751 14:50:47 Shutter LASER close 14:50:48 Received message from Master: op=PointingHead serial=12755 14:50:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:50:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:50:48 Point started: ret=0 14:50:48 point_skyscan result=0 14:50:49 Check angles 14:50:49 SkyScan query 14:50:49 SkyScan query done: ret=0 az=135.93<-9062 ze=-143.325<-21555 Statuses=0009 0009 14:50:49 Msec=0 True Az=135.93 Ze=-143.325 Az status=0009 Ze status=0009 14:50:49 Check angles 14:50:49 SkyScan query 14:50:50 SkyScan query done: ret=0 az=153.45<-10230 ze=-122.34<-20156 Statuses=0009 0009 14:50:50 Msec=750 True Az=153.45 Ze=-122.34 Az status=0009 Ze status=0009 14:50:50 Check angles 14:50:50 SkyScan query 14:50:51 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.445<-18763 Statuses=0009 0009 14:50:51 Msec=1500 True Az=170.82 Ze=-101.445 Az status=0009 Ze status=0009 14:50:51 Check angles 14:50:51 SkyScan query 14:50:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.445<-17363 Statuses=0008 0009 14:50:51 Msec=2250 True Az=176.025 Ze=-80.445 Az status=0008 Ze status=0009 14:50:52 Check angles 14:50:52 SkyScan query 14:50:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.505<-15967 Statuses=0008 0009 14:50:52 Msec=3000 True Az=176.01 Ze=-59.505 Az status=0008 Ze status=0009 14:50:52 Check angles 14:50:52 SkyScan query 14:50:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 14:50:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 14:50:53 Message to Master queued w/err=0: serial=12755 error=0 14:50:58 Received message from Master: op=Filter serial=12756 14:50:58 Color wheel filter change from 0 to 0 14:50:58 FLIGetFilterPos err=0 currentPosition=0 14:50:58 FLIGetStepsRemaining err=0 RemainingSteps=0 14:50:58 Filter is already there-color wheel unchanged 14:50:58 Received message from Master: op=Shutter serial=12757 14:50:58 Shutter LASER close 14:50:58 Received message from Camera: op=State serial=12759 14:50:58 GetSingleValue result=40 Value=cccccccc 14:50:58 SkyScan query 14:50:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:50:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:59 Parameters OK 14:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:59 Set A/D data flow result=40 14:50:59 Set A/D channel type result=40 14:50:59 Set A/D encoding result=40 14:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:59 Set channel filter=0.000000e+000 result=40 14:50:59 Config A/D Result=40 14:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:59 Get A/D filter: -9.255963e+061 result=40 14:50:59 Get A/D value=-858993460 result=40 14:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:50:59 Parameters OK 14:50:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:50:59 Set A/D data flow result=40 14:50:59 Set A/D channel type result=40 14:50:59 Set A/D encoding result=40 14:50:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:50:59 Set channel filter=0.000000e+000 result=40 14:50:59 Config A/D Result=40 14:50:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:50:59 Get A/D filter: -9.255963e+061 result=40 14:50:59 Get A/D value=-858993460 result=40 14:50:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:50:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:50:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:50:59 Aux= 14:50:59 Message to Camera, serial 12759 queued 14:51:30 Received message from Master: op=PointingHead serial=12766 14:51:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:51:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:51:30 Point started: ret=0 14:51:30 point_skyscan result=0 14:51:31 Check angles 14:51:31 SkyScan query 14:51:31 SkyScan query done: ret=0 az=153.255<-10217 ze=-22.02<-13468 Statuses=0009 0009 14:51:31 Msec=0 True Az=153.255 Ze=-22.02 Az status=0009 Ze status=0009 14:51:32 Check angles 14:51:32 SkyScan query 14:51:32 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.645<-12043 Statuses=0009 0009 14:51:32 Msec=750 True Az=135.435 Ze=-0.645 Az status=0009 Ze status=0009 14:51:32 Check angles 14:51:32 SkyScan query 14:51:33 SkyScan query done: ret=0 az=117.795<-7853 ze=20.325<-10645 Statuses=0009 0009 14:51:33 Msec=1500 True Az=117.795 Ze=20.325 Az status=0009 Ze status=0009 14:51:33 Check angles 14:51:33 SkyScan query 14:51:34 SkyScan query done: ret=0 az=100.53<-6702 ze=41.25<-9250 Statuses=0009 0009 14:51:34 Msec=2250 True Az=100.53 Ze=41.25 Az status=0009 Ze status=0009 14:51:34 Check angles 14:51:34 SkyScan query 14:51:34 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 14:51:34 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 14:51:35 Check angles 14:51:35 SkyScan query 14:51:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:51:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:51:35 Message to Master queued w/err=0: serial=12766 error=0 14:51:40 Received message from Master: op=Filter serial=12767 14:51:40 Color wheel filter change from 0 to 0 14:51:40 FLIGetFilterPos err=0 currentPosition=0 14:51:40 FLIGetStepsRemaining err=0 RemainingSteps=0 14:51:40 Filter is already there-color wheel unchanged 14:51:40 Received message from Master: op=Shutter serial=12768 14:51:40 Shutter LASER close 14:51:40 Received message from Camera: op=State serial=12770 14:51:40 GetSingleValue result=40 Value=cccccccc 14:51:40 SkyScan query 14:51:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:51:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:41 Parameters OK 14:51:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:41 Set A/D data flow result=40 14:51:41 Set A/D channel type result=40 14:51:41 Set A/D encoding result=40 14:51:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:41 Set channel filter=0.000000e+000 result=40 14:51:41 Config A/D Result=40 14:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:41 Get A/D filter: -9.255963e+061 result=40 14:51:41 Get A/D value=-858993460 result=40 14:51:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:51:41 Parameters OK 14:51:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:51:41 Set A/D data flow result=40 14:51:41 Set A/D channel type result=40 14:51:41 Set A/D encoding result=40 14:51:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:51:41 Set channel filter=0.000000e+000 result=40 14:51:41 Config A/D Result=40 14:51:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:51:41 Get A/D filter: -9.255963e+061 result=40 14:51:41 Get A/D value=-858993460 result=40 14:51:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:51:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:51:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:51:41 Aux= 14:51:41 Message to Camera, serial 12770 queued 14:51:49 Received message from Master: op=Identify serial=12771 [UTC 2018-12-4 14:52:09] 14:52:12 Received message from Master: op=PointingHead serial=12780 14:52:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:52:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:52:12 Point started: ret=0 14:52:12 point_skyscan result=0 14:52:13 Check angles 14:52:13 SkyScan query 14:52:13 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 14:52:13 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 14:52:14 Check angles 14:52:14 SkyScan query 14:52:14 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 14:52:14 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 14:52:14 Check angles 14:52:14 SkyScan query 14:52:15 SkyScan query done: ret=0 az=143.97<-9598 ze=38.505<-9433 Statuses=0009 0008 14:52:15 Msec=1500 True Az=143.97 Ze=38.505 Az status=0009 Ze status=0008 14:52:15 Check angles 14:52:15 SkyScan query 14:52:16 SkyScan query done: ret=0 az=161.34<-10756 ze=38.505<-9433 Statuses=0009 0008 14:52:16 Msec=2250 True Az=161.34 Ze=38.505 Az status=0009 Ze status=0008 14:52:16 Check angles 14:52:16 SkyScan query 14:52:16 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 14:52:16 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 14:52:17 Check angles 14:52:17 SkyScan query 14:52:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:52:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:52:17 Message to Master queued w/err=0: serial=12780 error=0 14:52:22 Received message from Master: op=Filter serial=12781 14:52:22 Color wheel filter change from 0 to 0 14:52:22 FLIGetFilterPos err=0 currentPosition=0 14:52:22 FLIGetStepsRemaining err=0 RemainingSteps=0 14:52:22 Filter is already there-color wheel unchanged 14:52:22 Received message from Master: op=Shutter serial=12782 14:52:22 Shutter LASER close 14:52:22 Received message from Camera: op=State serial=12784 14:52:22 GetSingleValue result=40 Value=cccccccc 14:52:22 SkyScan query 14:52:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:52:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:23 Parameters OK 14:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:23 Set A/D data flow result=40 14:52:23 Set A/D channel type result=40 14:52:23 Set A/D encoding result=40 14:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:23 Set channel filter=0.000000e+000 result=40 14:52:23 Config A/D Result=40 14:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:23 Get A/D filter: -9.255963e+061 result=40 14:52:23 Get A/D value=-858993460 result=40 14:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:52:23 Parameters OK 14:52:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:52:23 Set A/D data flow result=40 14:52:23 Set A/D channel type result=40 14:52:23 Set A/D encoding result=40 14:52:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:52:23 Set channel filter=0.000000e+000 result=40 14:52:23 Config A/D Result=40 14:52:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:52:23 Get A/D filter: -9.255963e+061 result=40 14:52:23 Get A/D value=-858993460 result=40 14:52:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:52:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:52:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:52:23 Aux= 14:52:23 Message to Camera, serial 12784 queued 14:52:54 Received message from Master: op=PointingHead serial=12791 14:52:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:52:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:52:54 Point started: ret=0 14:52:54 point_skyscan result=0 14:52:55 Check angles 14:52:55 SkyScan query 14:52:56 SkyScan query done: ret=0 az=153<-10200 ze=8.865<-11409 Statuses=0009 0009 14:52:56 Msec=0 True Az=153 Ze=8.865 Az status=0009 Ze status=0009 14:52:56 Check angles 14:52:56 SkyScan query 14:52:56 SkyScan query done: ret=0 az=135.66<-9044 ze=-12.06<-12804 Statuses=0009 0009 14:52:56 Msec=750 True Az=135.66 Ze=-12.06 Az status=0009 Ze status=0009 14:52:56 Check angles 14:52:56 SkyScan query 14:52:57 SkyScan query done: ret=0 az=118.11<-7874 ze=-33<-14200 Statuses=0009 0009 14:52:57 Msec=1500 True Az=118.11 Ze=-33 Az status=0009 Ze status=0009 14:52:57 Check angles 14:52:57 SkyScan query 14:52:58 SkyScan query done: ret=0 az=100.275<-6685 ze=-51.54<-15436 Statuses=0009 0009 14:52:58 Msec=2250 True Az=100.275 Ze=-51.54 Az status=0009 Ze status=0009 14:52:58 Check angles 14:52:58 SkyScan query 14:52:59 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:52:59 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:52:59 Check angles 14:52:59 SkyScan query 14:52:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:52:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:52:59 Message to Master queued w/err=0: serial=12791 error=0 14:53:04 Received message from Master: op=Filter serial=12792 14:53:04 Color wheel filter change from 0 to 0 14:53:04 FLIGetFilterPos err=0 currentPosition=0 14:53:04 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:04 Filter is already there-color wheel unchanged 14:53:04 Received message from Master: op=Shutter serial=12793 14:53:04 Shutter LASER close 14:53:05 Received message from Camera: op=State serial=12795 14:53:05 GetSingleValue result=40 Value=cccccccc 14:53:05 SkyScan query 14:53:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:53:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:05 Parameters OK 14:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:05 Set A/D data flow result=40 14:53:05 Set A/D channel type result=40 14:53:05 Set A/D encoding result=40 14:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:05 Set channel filter=0.000000e+000 result=40 14:53:05 Config A/D Result=40 14:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:05 Get A/D filter: -9.255963e+061 result=40 14:53:05 Get A/D value=-858993460 result=40 14:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:05 Parameters OK 14:53:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:05 Set A/D data flow result=40 14:53:05 Set A/D channel type result=40 14:53:05 Set A/D encoding result=40 14:53:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:05 Set channel filter=0.000000e+000 result=40 14:53:05 Config A/D Result=40 14:53:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:05 Get A/D filter: -9.255963e+061 result=40 14:53:05 Get A/D value=-858993460 result=40 14:53:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:05 Aux= 14:53:05 Message to Camera, serial 12795 queued 14:53:36 Received message from Master: op=PointingHead serial=12802 14:53:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:53:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:53:36 Point started: ret=0 14:53:36 point_skyscan result=0 14:53:37 Check angles 14:53:37 SkyScan query 14:53:38 SkyScan query done: ret=0 az=108.945<-7263 ze=-81.3<-17420 Statuses=0009 0009 14:53:38 Msec=0 True Az=108.945 Ze=-81.3 Az status=0009 Ze status=0009 14:53:38 Check angles 14:53:38 SkyScan query 14:53:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.57<-18838 Statuses=0008 0009 14:53:38 Msec=750 True Az=112.995 Ze=-102.57 Az status=0008 Ze status=0009 14:53:39 Check angles 14:53:39 SkyScan query 14:53:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.975<-20265 Statuses=0008 0009 14:53:39 Msec=1500 True Az=112.995 Ze=-123.975 Az status=0008 Ze status=0009 14:53:39 Check angles 14:53:39 SkyScan query 14:53:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.395<-21693 Statuses=0008 0009 14:53:40 Msec=2250 True Az=112.995 Ze=-145.395 Az status=0008 Ze status=0009 14:53:40 Check angles 14:53:40 SkyScan query 14:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.32<-23088 Statuses=0008 0009 14:53:41 Msec=3000 True Az=112.995 Ze=-166.32 Az status=0008 Ze status=0009 14:53:41 Check angles 14:53:41 SkyScan query 14:53:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:53:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:53:41 Message to Master queued w/err=0: serial=12802 error=0 14:53:46 Received message from Master: op=Filter serial=12803 14:53:46 Color wheel filter change from 0 to 0 14:53:46 FLIGetFilterPos err=0 currentPosition=0 14:53:46 FLIGetStepsRemaining err=0 RemainingSteps=0 14:53:46 Filter is already there-color wheel unchanged 14:53:47 Received message from Master: op=Shutter serial=12804 14:53:47 Shutter LASER open 14:53:47 Received message from Camera: op=State serial=12806 14:53:47 GetSingleValue result=40 Value=cccccccc 14:53:47 SkyScan query 14:53:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:53:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:47 Parameters OK 14:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:47 Set A/D data flow result=40 14:53:47 Set A/D channel type result=40 14:53:47 Set A/D encoding result=40 14:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:47 Set channel filter=0.000000e+000 result=40 14:53:47 Config A/D Result=40 14:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:47 Get A/D filter: -9.255963e+061 result=40 14:53:47 Get A/D value=-858993460 result=40 14:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:53:47 Parameters OK 14:53:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:53:47 Set A/D data flow result=40 14:53:47 Set A/D channel type result=40 14:53:47 Set A/D encoding result=40 14:53:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:53:47 Set channel filter=0.000000e+000 result=40 14:53:47 Config A/D Result=40 14:53:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:53:47 Get A/D filter: -9.255963e+061 result=40 14:53:47 Get A/D value=-858993460 result=40 14:53:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:53:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:53:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:53:47 Aux= 14:53:47 Message to Camera, serial 12806 queued 14:53:50 Received message from Master: op=Shutter serial=12810 14:53:50 Shutter LASER close 14:53:50 Received message from Master: op=PointingHead serial=12814 14:53:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:53:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:53:51 Point started: ret=0 14:53:51 point_skyscan result=0 14:53:51 Check angles 14:53:51 SkyScan query 14:53:52 SkyScan query done: ret=0 az=89.565<-5971 ze=156.855<-1543 Statuses=0009 0009 14:53:52 Msec=0 True Az=89.565 Ze=156.855 Az status=0009 Ze status=0009 14:53:52 Check angles 14:53:52 SkyScan query 14:53:53 SkyScan query done: ret=0 az=72.045<-4803 ze=135.87<-2942 Statuses=0009 0009 14:53:53 Msec=750 True Az=72.045 Ze=135.87 Az status=0009 Ze status=0009 14:53:53 Check angles 14:53:53 SkyScan query 14:53:53 SkyScan query done: ret=0 az=54.78<-3652 ze=114.945<-4337 Statuses=0009 0009 14:53:53 Msec=1500 True Az=54.78 Ze=114.945 Az status=0009 Ze status=0009 14:53:54 Check angles 14:53:54 SkyScan query 14:53:54 SkyScan query done: ret=0 az=40.95<-2730 ze=93.54<-5764 Statuses=0009 0009 14:53:54 Msec=2250 True Az=40.95 Ze=93.54 Az status=0009 Ze status=0009 14:53:54 Check angles 14:53:54 SkyScan query 14:53:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.135<-7191 Statuses=0008 0009 14:53:55 Msec=3000 True Az=40.995 Ze=72.135 Az status=0008 Ze status=0009 14:53:55 Check angles 14:53:55 SkyScan query 14:53:56 SkyScan query done: ret=0 az=40.995<-2733 ze=52.11<-8526 Statuses=0008 0009 14:53:56 Msec=3750 True Az=40.995 Ze=52.11 Az status=0008 Ze status=0009 14:53:56 Check angles 14:53:56 SkyScan query 14:53:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 14:53:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 14:53:56 Message to Master queued w/err=0: serial=12814 error=0 14:54:01 Received message from Master: op=Filter serial=12815 14:54:01 Color wheel filter change from 0 to 0 14:54:01 FLIGetFilterPos err=0 currentPosition=0 14:54:01 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:01 Filter is already there-color wheel unchanged 14:54:02 Received message from Master: op=Shutter serial=12816 14:54:02 Shutter LASER close 14:54:02 Received message from Camera: op=State serial=12818 14:54:02 GetSingleValue result=40 Value=cccccccc 14:54:02 SkyScan query 14:54:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 14:54:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:02 Parameters OK 14:54:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:02 Set A/D data flow result=40 14:54:02 Set A/D channel type result=40 14:54:02 Set A/D encoding result=40 14:54:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:02 Set channel filter=0.000000e+000 result=40 14:54:02 Config A/D Result=40 14:54:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:02 Get A/D filter: -9.255963e+061 result=40 14:54:02 Get A/D value=-858993460 result=40 14:54:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:02 Parameters OK 14:54:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:02 Set A/D data flow result=40 14:54:02 Set A/D channel type result=40 14:54:02 Set A/D encoding result=40 14:54:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:02 Set channel filter=0.000000e+000 result=40 14:54:02 Config A/D Result=40 14:54:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:02 Get A/D filter: -9.255963e+061 result=40 14:54:02 Get A/D value=-858993460 result=40 14:54:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:02 Aux= 14:54:02 Message to Camera, serial 12818 queued 14:54:33 Received message from Master: op=PointingHead serial=12825 14:54:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 14:54:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 14:54:34 Point started: ret=0 14:54:34 point_skyscan result=0 14:54:34 Check angles 14:54:34 SkyScan query 14:54:35 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 14:54:35 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 14:54:35 Check angles 14:54:35 SkyScan query 14:54:36 SkyScan query done: ret=0 az=82.245<-5483 ze=66.495<-7567 Statuses=0009 0008 14:54:36 Msec=750 True Az=82.245 Ze=66.495 Az status=0009 Ze status=0008 14:54:36 Check angles 14:54:36 SkyScan query 14:54:36 SkyScan query done: ret=0 az=99.735<-6649 ze=66.495<-7567 Statuses=0009 0008 14:54:36 Msec=1500 True Az=99.735 Ze=66.495 Az status=0009 Ze status=0008 14:54:37 Check angles 14:54:37 SkyScan query 14:54:37 SkyScan query done: ret=0 az=117.195<-7813 ze=66.495<-7567 Statuses=0009 0008 14:54:37 Msec=2250 True Az=117.195 Ze=66.495 Az status=0009 Ze status=0008 14:54:37 Check angles 14:54:37 SkyScan query 14:54:38 SkyScan query done: ret=0 az=135.045<-9003 ze=66.495<-7567 Statuses=0009 0008 14:54:38 Msec=3000 True Az=135.045 Ze=66.495 Az status=0009 Ze status=0008 14:54:38 Check angles 14:54:38 SkyScan query 14:54:39 SkyScan query done: ret=0 az=152.685<-10179 ze=66.495<-7567 Statuses=0009 0008 14:54:39 Msec=3750 True Az=152.685 Ze=66.495 Az status=0009 Ze status=0008 14:54:39 Check angles 14:54:39 SkyScan query 14:54:39 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 14:54:39 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 14:54:39 Message to Master queued w/err=0: serial=12825 error=0 14:54:44 Received message from Master: op=Filter serial=12826 14:54:44 Color wheel filter change from 0 to 0 14:54:44 FLIGetFilterPos err=0 currentPosition=0 14:54:44 FLIGetStepsRemaining err=0 RemainingSteps=0 14:54:44 Filter is already there-color wheel unchanged 14:54:45 Received message from Master: op=Shutter serial=12827 14:54:45 Shutter LASER close 14:54:45 Received message from Camera: op=State serial=12829 14:54:45 GetSingleValue result=40 Value=cccccccc 14:54:45 SkyScan query 14:54:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 14:54:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:45 Parameters OK 14:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:45 Set A/D data flow result=40 14:54:45 Set A/D channel type result=40 14:54:45 Set A/D encoding result=40 14:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:45 Set channel filter=0.000000e+000 result=40 14:54:45 Config A/D Result=40 14:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:45 Get A/D filter: -9.255963e+061 result=40 14:54:45 Get A/D value=-858993460 result=40 14:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:54:45 Parameters OK 14:54:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:54:45 Set A/D data flow result=40 14:54:45 Set A/D channel type result=40 14:54:45 Set A/D encoding result=40 14:54:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:54:45 Set channel filter=0.000000e+000 result=40 14:54:45 Config A/D Result=40 14:54:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:54:45 Get A/D filter: -9.255963e+061 result=40 14:54:45 Get A/D value=-858993460 result=40 14:54:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:54:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:54:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:54:45 Aux= 14:54:45 Message to Camera, serial 12829 queued 14:55:16 Received message from Master: op=PointingHead serial=12836 14:55:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 14:55:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 14:55:16 Point started: ret=0 14:55:16 point_skyscan result=0 14:55:17 Check angles 14:55:17 SkyScan query 14:55:18 SkyScan query done: ret=0 az=134.775<-8985 ze=36.435<-9571 Statuses=0009 0009 14:55:18 Msec=0 True Az=134.775 Ze=36.435 Az status=0009 Ze status=0009 14:55:18 Check angles 14:55:18 SkyScan query 14:55:18 SkyScan query done: ret=0 az=116.865<-7791 ze=15.06<-10996 Statuses=0009 0009 14:55:18 Msec=750 True Az=116.865 Ze=15.06 Az status=0009 Ze status=0009 14:55:19 Check angles 14:55:19 SkyScan query 14:55:19 SkyScan query done: ret=0 az=99.45<-6630 ze=-5.91<-12394 Statuses=0009 0009 14:55:19 Msec=1500 True Az=99.45 Ze=-5.91 Az status=0009 Ze status=0009 14:55:19 Check angles 14:55:19 SkyScan query 14:55:20 SkyScan query done: ret=0 az=81.66<-5444 ze=-27.285<-13819 Statuses=0009 0009 14:55:20 Msec=2250 True Az=81.66 Ze=-27.285 Az status=0009 Ze status=0009 14:55:20 Check angles 14:55:20 SkyScan query 14:55:21 SkyScan query done: ret=0 az=64.02<-4268 ze=-38.565<-14571 Statuses=0009 0008 14:55:21 Msec=3000 True Az=64.02 Ze=-38.565 Az status=0009 Ze status=0008 14:55:21 Check angles 14:55:21 SkyScan query 14:55:21 SkyScan query done: ret=0 az=46.695<-3113 ze=-38.535<-14569 Statuses=0009 0008 14:55:21 Msec=3750 True Az=46.695 Ze=-38.535 Az status=0009 Ze status=0008 14:55:22 Check angles 14:55:22 SkyScan query 14:55:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:55:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 14:55:22 Message to Master queued w/err=0: serial=12836 error=0 14:55:27 Received message from Master: op=Filter serial=12837 14:55:27 Color wheel filter change from 0 to 0 14:55:27 FLIGetFilterPos err=0 currentPosition=0 14:55:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:55:27 Filter is already there-color wheel unchanged 14:55:27 Received message from Master: op=Shutter serial=12838 14:55:27 Shutter LASER close 14:55:28 Received message from Camera: op=State serial=12840 14:55:28 GetSingleValue result=40 Value=cccccccc 14:55:28 SkyScan query 14:55:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 14:55:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:28 Parameters OK 14:55:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:28 Set A/D data flow result=40 14:55:28 Set A/D channel type result=40 14:55:28 Set A/D encoding result=40 14:55:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:28 Set channel filter=0.000000e+000 result=40 14:55:28 Config A/D Result=40 14:55:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:28 Get A/D filter: -9.255963e+061 result=40 14:55:28 Get A/D value=-858993460 result=40 14:55:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:55:28 Parameters OK 14:55:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:55:28 Set A/D data flow result=40 14:55:28 Set A/D channel type result=40 14:55:28 Set A/D encoding result=40 14:55:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:55:28 Set channel filter=0.000000e+000 result=40 14:55:28 Config A/D Result=40 14:55:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:55:28 Get A/D filter: -9.255963e+061 result=40 14:55:28 Get A/D value=-858993460 result=40 14:55:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:55:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:55:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:55:28 Aux= 14:55:28 Message to Camera, serial 12840 queued 14:55:59 Received message from Master: op=PointingHead serial=12847 14:55:59 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 14:55:59 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 14:55:59 Point started: ret=0 14:55:59 point_skyscan result=0 14:56:00 Check angles 14:56:00 SkyScan query 14:56:01 SkyScan query done: ret=0 az=63.915<-4261 ze=-68.19<-16546 Statuses=0009 0009 14:56:01 Msec=0 True Az=63.915 Ze=-68.19 Az status=0009 Ze status=0009 14:56:01 Check angles 14:56:01 SkyScan query 14:56:01 SkyScan query done: ret=0 az=81.525<-5435 ze=-89.145<-17943 Statuses=0009 0009 14:56:01 Msec=750 True Az=81.525 Ze=-89.145 Az status=0009 Ze status=0009 14:56:02 Check angles 14:56:02 SkyScan query 14:56:02 SkyScan query done: ret=0 az=99.12<-6608 ze=-110.085<-19339 Statuses=0009 0009 14:56:02 Msec=1500 True Az=99.12 Ze=-110.085 Az status=0009 Ze status=0009 14:56:02 Check angles 14:56:02 SkyScan query 14:56:03 SkyScan query done: ret=0 az=116.805<-7787 ze=-131.475<-20765 Statuses=0009 0009 14:56:03 Msec=2250 True Az=116.805 Ze=-131.475 Az status=0009 Ze status=0009 14:56:03 Check angles 14:56:03 SkyScan query 14:56:04 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 14:56:04 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 14:56:04 Check angles 14:56:04 SkyScan query 14:56:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 14:56:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 14:56:04 Message to Master queued w/err=0: serial=12847 error=0 14:56:09 Received message from Master: op=Filter serial=12848 14:56:09 Color wheel filter change from 0 to 0 14:56:09 FLIGetFilterPos err=0 currentPosition=0 14:56:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:09 Filter is already there-color wheel unchanged 14:56:10 Received message from Master: op=Shutter serial=12849 14:56:10 Shutter LASER close 14:56:10 Received message from Camera: op=State serial=12851 14:56:10 GetSingleValue result=40 Value=cccccccc 14:56:10 SkyScan query 14:56:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 14:56:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:10 Parameters OK 14:56:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:10 Set A/D data flow result=40 14:56:10 Set A/D channel type result=40 14:56:10 Set A/D encoding result=40 14:56:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:10 Set channel filter=0.000000e+000 result=40 14:56:10 Config A/D Result=40 14:56:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:10 Get A/D filter: -9.255963e+061 result=40 14:56:10 Get A/D value=-858993460 result=40 14:56:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:10 Parameters OK 14:56:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:10 Set A/D data flow result=40 14:56:10 Set A/D channel type result=40 14:56:10 Set A/D encoding result=40 14:56:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:10 Set channel filter=0.000000e+000 result=40 14:56:10 Config A/D Result=40 14:56:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:10 Get A/D filter: -9.255963e+061 result=40 14:56:10 Get A/D value=-858993460 result=40 14:56:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:10 Aux= 14:56:10 Message to Camera, serial 12851 queued 14:56:41 Received message from Master: op=PointingHead serial=12858 14:56:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:56:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:56:41 Point started: ret=0 14:56:41 point_skyscan result=0 14:56:42 Check angles 14:56:42 SkyScan query 14:56:43 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.015<-23401 Statuses=0009 0009 14:56:43 Msec=0 True Az=113.01 Ze=-171.015 Az status=0009 Ze status=0009 14:56:43 Check angles 14:56:43 SkyScan query 14:56:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 14:56:44 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 14:56:44 Message to Master queued w/err=0: serial=12858 error=0 14:56:49 Received message from Master: op=Filter serial=12859 14:56:49 Color wheel filter change from 0 to 0 14:56:49 FLIGetFilterPos err=0 currentPosition=0 14:56:49 FLIGetStepsRemaining err=0 RemainingSteps=0 14:56:49 Filter is already there-color wheel unchanged 14:56:49 Received message from Master: op=Shutter serial=12860 14:56:49 Shutter LASER open 14:56:49 Received message from Camera: op=State serial=12862 14:56:49 GetSingleValue result=40 Value=cccccccc 14:56:49 SkyScan query 14:56:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:56:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:49 Parameters OK 14:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:49 Set A/D data flow result=40 14:56:49 Set A/D channel type result=40 14:56:49 Set A/D encoding result=40 14:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:49 Set channel filter=0.000000e+000 result=40 14:56:49 Config A/D Result=40 14:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:49 Get A/D filter: -9.255963e+061 result=40 14:56:49 Get A/D value=-858993460 result=40 14:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:56:49 Parameters OK 14:56:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:56:49 Set A/D data flow result=40 14:56:49 Set A/D channel type result=40 14:56:49 Set A/D encoding result=40 14:56:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:56:49 Set channel filter=0.000000e+000 result=40 14:56:49 Config A/D Result=40 14:56:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:56:49 Get A/D filter: -9.255963e+061 result=40 14:56:49 Get A/D value=-858993460 result=40 14:56:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:56:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:56:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:56:49 Aux= 14:56:49 Message to Camera, serial 12862 queued 14:56:52 Received message from Master: op=Shutter serial=12866 14:56:52 Shutter LASER close 14:56:52 Received message from Master: op=PointingHead serial=12870 14:56:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 14:56:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 14:56:53 Point started: ret=0 14:56:53 point_skyscan result=0 14:56:54 Check angles 14:56:54 SkyScan query 14:56:54 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.535<-21569 Statuses=0009 0009 14:56:54 Msec=0 True Az=135.735 Ze=-143.535 Az status=0009 Ze status=0009 14:56:54 Check angles 14:56:54 SkyScan query 14:56:55 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.145<-20143 Statuses=0009 0009 14:56:55 Msec=750 True Az=153.585 Ze=-122.145 Az status=0009 Ze status=0009 14:56:55 Check angles 14:56:55 SkyScan query 14:56:56 SkyScan query done: ret=0 az=170.955<-11397 ze=-101.22<-18748 Statuses=0009 0009 14:56:56 Msec=1500 True Az=170.955 Ze=-101.22 Az status=0009 Ze status=0009 14:56:56 Check angles 14:56:56 SkyScan query 14:56:56 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.25<-17350 Statuses=0008 0009 14:56:56 Msec=2250 True Az=176.025 Ze=-80.25 Az status=0008 Ze status=0009 14:56:57 Check angles 14:56:57 SkyScan query 14:56:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.86<-15924 Statuses=0008 0009 14:56:57 Msec=3000 True Az=175.995 Ze=-58.86 Az status=0008 Ze status=0009 14:56:57 Check angles 14:56:57 SkyScan query 14:56:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 14:56:58 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 14:56:58 Message to Master queued w/err=0: serial=12870 error=0 14:57:03 Received message from Master: op=Filter serial=12871 14:57:03 Color wheel filter change from 0 to 0 14:57:03 FLIGetFilterPos err=0 currentPosition=0 14:57:03 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:03 Filter is already there-color wheel unchanged 14:57:03 Received message from Master: op=Shutter serial=12872 14:57:03 Shutter LASER close 14:57:03 Received message from Camera: op=State serial=12874 14:57:03 GetSingleValue result=40 Value=cccccccc 14:57:03 SkyScan query 14:57:04 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 14:57:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:04 Parameters OK 14:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:04 Set A/D data flow result=40 14:57:04 Set A/D channel type result=40 14:57:04 Set A/D encoding result=40 14:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:04 Set channel filter=0.000000e+000 result=40 14:57:04 Config A/D Result=40 14:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:04 Get A/D filter: -9.255963e+061 result=40 14:57:04 Get A/D value=-858993460 result=40 14:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:04 Parameters OK 14:57:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:04 Set A/D data flow result=40 14:57:04 Set A/D channel type result=40 14:57:04 Set A/D encoding result=40 14:57:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:04 Set channel filter=0.000000e+000 result=40 14:57:04 Config A/D Result=40 14:57:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:04 Get A/D filter: -9.255963e+061 result=40 14:57:04 Get A/D value=-858993460 result=40 14:57:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:04 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:04 Aux= 14:57:04 Message to Camera, serial 12874 queued 14:57:35 Received message from Master: op=PointingHead serial=12881 14:57:35 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 14:57:35 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 14:57:35 Point started: ret=0 14:57:35 point_skyscan result=0 14:57:36 Check angles 14:57:36 SkyScan query 14:57:36 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 14:57:36 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 14:57:37 Check angles 14:57:37 SkyScan query 14:57:37 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.795<-12053 Statuses=0009 0009 14:57:37 Msec=750 True Az=135.435 Ze=-0.795 Az status=0009 Ze status=0009 14:57:37 Check angles 14:57:37 SkyScan query 14:57:38 SkyScan query done: ret=0 az=117.945<-7863 ze=20.175<-10655 Statuses=0009 0009 14:57:38 Msec=1500 True Az=117.945 Ze=20.175 Az status=0009 Ze status=0009 14:57:38 Check angles 14:57:38 SkyScan query 14:57:39 SkyScan query done: ret=0 az=100.47<-6698 ze=41.115<-9259 Statuses=0009 0009 14:57:39 Msec=2250 True Az=100.47 Ze=41.115 Az status=0009 Ze status=0009 14:57:39 Check angles 14:57:39 SkyScan query 14:57:39 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 14:57:39 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 14:57:40 Check angles 14:57:40 SkyScan query 14:57:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 14:57:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 14:57:40 Message to Master queued w/err=0: serial=12881 error=0 14:57:45 Received message from Master: op=Filter serial=12882 14:57:45 Color wheel filter change from 0 to 0 14:57:45 FLIGetFilterPos err=0 currentPosition=0 14:57:45 FLIGetStepsRemaining err=0 RemainingSteps=0 14:57:45 Filter is already there-color wheel unchanged 14:57:45 Received message from Master: op=Shutter serial=12883 14:57:45 Shutter LASER close 14:57:45 Received message from Camera: op=State serial=12885 14:57:45 GetSingleValue result=40 Value=cccccccc 14:57:45 SkyScan query 14:57:46 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 14:57:46 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:46 Parameters OK 14:57:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:46 Set A/D data flow result=40 14:57:46 Set A/D channel type result=40 14:57:46 Set A/D encoding result=40 14:57:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:46 Set channel filter=0.000000e+000 result=40 14:57:46 Config A/D Result=40 14:57:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:46 Get A/D filter: -9.255963e+061 result=40 14:57:46 Get A/D value=-858993460 result=40 14:57:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:46 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:57:46 Parameters OK 14:57:46 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:57:46 Set A/D data flow result=40 14:57:46 Set A/D channel type result=40 14:57:46 Set A/D encoding result=40 14:57:46 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:57:46 Set channel filter=0.000000e+000 result=40 14:57:46 Config A/D Result=40 14:57:46 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:57:46 Get A/D filter: -9.255963e+061 result=40 14:57:46 Get A/D value=-858993460 result=40 14:57:46 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:57:46 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:57:46 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:57:46 Aux= 14:57:46 Message to Camera, serial 12885 queued 14:58:17 Received message from Master: op=PointingHead serial=12892 14:58:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 14:58:17 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 14:58:17 Point started: ret=0 14:58:17 point_skyscan result=0 14:58:18 Check angles 14:58:18 SkyScan query 14:58:18 SkyScan query done: ret=0 az=108.855<-7257 ze=38.49<-9434 Statuses=0009 0008 14:58:18 Msec=0 True Az=108.855 Ze=38.49 Az status=0009 Ze status=0008 14:58:19 Check angles 14:58:19 SkyScan query 14:58:19 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 14:58:19 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 14:58:19 Check angles 14:58:19 SkyScan query 14:58:20 SkyScan query done: ret=0 az=143.835<-9589 ze=38.505<-9433 Statuses=0009 0008 14:58:20 Msec=1500 True Az=143.835 Ze=38.505 Az status=0009 Ze status=0008 14:58:20 Check angles 14:58:20 SkyScan query 14:58:21 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 14:58:21 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 14:58:21 Check angles 14:58:21 SkyScan query 14:58:21 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 14:58:21 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 14:58:22 Check angles 14:58:22 SkyScan query 14:58:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 14:58:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 14:58:22 Message to Master queued w/err=0: serial=12892 error=0 14:58:27 Received message from Master: op=Filter serial=12893 14:58:27 Color wheel filter change from 0 to 0 14:58:27 FLIGetFilterPos err=0 currentPosition=0 14:58:27 FLIGetStepsRemaining err=0 RemainingSteps=0 14:58:27 Filter is already there-color wheel unchanged 14:58:27 Received message from Master: op=Shutter serial=12894 14:58:27 Shutter LASER close 14:58:27 Received message from Camera: op=State serial=12896 14:58:27 GetSingleValue result=40 Value=cccccccc 14:58:27 SkyScan query 14:58:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 14:58:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:28 Parameters OK 14:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:28 Set A/D data flow result=40 14:58:28 Set A/D channel type result=40 14:58:28 Set A/D encoding result=40 14:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:28 Set channel filter=0.000000e+000 result=40 14:58:28 Config A/D Result=40 14:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:28 Get A/D filter: -9.255963e+061 result=40 14:58:28 Get A/D value=-858993460 result=40 14:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:58:28 Parameters OK 14:58:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:58:28 Set A/D data flow result=40 14:58:28 Set A/D channel type result=40 14:58:28 Set A/D encoding result=40 14:58:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:58:28 Set channel filter=0.000000e+000 result=40 14:58:28 Config A/D Result=40 14:58:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:58:28 Get A/D filter: -9.255963e+061 result=40 14:58:28 Get A/D value=-858993460 result=40 14:58:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:58:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:58:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:58:28 Aux= 14:58:28 Message to Camera, serial 12896 queued 14:58:59 Received message from Master: op=PointingHead serial=12903 14:58:59 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 14:58:59 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 14:58:59 Point started: ret=0 14:58:59 point_skyscan result=0 14:59:00 Check angles 14:59:00 SkyScan query 14:59:01 SkyScan query done: ret=0 az=152.79<-10186 ze=8.385<-11441 Statuses=0009 0009 14:59:01 Msec=0 True Az=152.79 Ze=8.385 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:01 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.57<-12838 Statuses=0009 0009 14:59:01 Msec=750 True Az=135.24 Ze=-12.57 Az status=0009 Ze status=0009 14:59:01 Check angles 14:59:01 SkyScan query 14:59:02 SkyScan query done: ret=0 az=117.435<-7829 ze=-33.96<-14264 Statuses=0009 0009 14:59:02 Msec=1500 True Az=117.435 Ze=-33.96 Az status=0009 Ze status=0009 14:59:02 Check angles 14:59:02 SkyScan query 14:59:03 SkyScan query done: ret=0 az=100.02<-6668 ze=-51.555<-15437 Statuses=0009 0009 14:59:03 Msec=2250 True Az=100.02 Ze=-51.555 Az status=0009 Ze status=0009 14:59:03 Check angles 14:59:03 SkyScan query 14:59:04 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 14:59:04 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 14:59:04 Check angles 14:59:04 SkyScan query 14:59:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:59:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 14:59:04 Message to Master queued w/err=0: serial=12903 error=0 14:59:09 Received message from Master: op=Filter serial=12904 14:59:09 Color wheel filter change from 0 to 0 14:59:09 FLIGetFilterPos err=0 currentPosition=0 14:59:09 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:09 Filter is already there-color wheel unchanged 14:59:09 Received message from Master: op=Shutter serial=12905 14:59:09 Shutter LASER close 14:59:09 Received message from Camera: op=State serial=12907 14:59:09 GetSingleValue result=40 Value=cccccccc 14:59:09 SkyScan query 14:59:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 14:59:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:10 Parameters OK 14:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:10 Set A/D data flow result=40 14:59:10 Set A/D channel type result=40 14:59:10 Set A/D encoding result=40 14:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:10 Set channel filter=0.000000e+000 result=40 14:59:10 Config A/D Result=40 14:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:10 Get A/D filter: -9.255963e+061 result=40 14:59:10 Get A/D value=-858993460 result=40 14:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:10 Parameters OK 14:59:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:10 Set A/D data flow result=40 14:59:10 Set A/D channel type result=40 14:59:10 Set A/D encoding result=40 14:59:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:10 Set channel filter=0.000000e+000 result=40 14:59:10 Config A/D Result=40 14:59:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:10 Get A/D filter: -9.255963e+061 result=40 14:59:10 Get A/D value=-858993460 result=40 14:59:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:10 Aux= 14:59:10 Message to Camera, serial 12907 queued 14:59:41 Received message from Master: op=PointingHead serial=12914 14:59:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 14:59:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 14:59:41 Point started: ret=0 14:59:41 point_skyscan result=0 14:59:42 Check angles 14:59:42 SkyScan query 14:59:43 SkyScan query done: ret=0 az=109.2<-7280 ze=-81.51<-17434 Statuses=0009 0009 14:59:43 Msec=0 True Az=109.2 Ze=-81.51 Az status=0009 Ze status=0009 14:59:43 Check angles 14:59:43 SkyScan query 14:59:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.975<-18865 Statuses=0008 0009 14:59:43 Msec=750 True Az=112.995 Ze=-102.975 Az status=0008 Ze status=0009 14:59:44 Check angles 14:59:44 SkyScan query 14:59:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 14:59:44 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 14:59:44 Check angles 14:59:44 SkyScan query 14:59:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 14:59:45 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 14:59:45 Check angles 14:59:45 SkyScan query 14:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.765<-23051 Statuses=0008 0009 14:59:46 Msec=3000 True Az=112.995 Ze=-165.765 Az status=0008 Ze status=0009 14:59:46 Check angles 14:59:46 SkyScan query 14:59:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 14:59:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 14:59:46 Message to Master queued w/err=0: serial=12914 error=0 14:59:51 Received message from Master: op=Filter serial=12915 14:59:51 Color wheel filter change from 0 to 0 14:59:51 FLIGetFilterPos err=0 currentPosition=0 14:59:51 FLIGetStepsRemaining err=0 RemainingSteps=0 14:59:51 Filter is already there-color wheel unchanged 14:59:52 Received message from Master: op=Shutter serial=12916 14:59:52 Shutter LASER open 14:59:52 Received message from Camera: op=State serial=12918 14:59:52 GetSingleValue result=40 Value=cccccccc 14:59:52 SkyScan query 14:59:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 14:59:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:52 Parameters OK 14:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:52 Set A/D data flow result=40 14:59:52 Set A/D channel type result=40 14:59:52 Set A/D encoding result=40 14:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:52 Set channel filter=0.000000e+000 result=40 14:59:52 Config A/D Result=40 14:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:52 Get A/D filter: -9.255963e+061 result=40 14:59:52 Get A/D value=-858993460 result=40 14:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 14:59:52 Parameters OK 14:59:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 14:59:52 Set A/D data flow result=40 14:59:52 Set A/D channel type result=40 14:59:52 Set A/D encoding result=40 14:59:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 14:59:52 Set channel filter=0.000000e+000 result=40 14:59:52 Config A/D Result=40 14:59:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 14:59:52 Get A/D filter: -9.255963e+061 result=40 14:59:52 Get A/D value=-858993460 result=40 14:59:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 14:59:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 14:59:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 14:59:52 Aux= 14:59:52 Message to Camera, serial 12918 queued 14:59:55 Received message from Master: op=Shutter serial=12922 14:59:55 Shutter LASER close 14:59:55 Received message from Master: op=PointingHead serial=12926 14:59:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 14:59:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 14:59:55 Point started: ret=0 14:59:55 point_skyscan result=0 14:59:56 Check angles 14:59:56 SkyScan query 14:59:57 SkyScan query done: ret=0 az=89.685<-5979 ze=156.96<-1536 Statuses=0009 0009 14:59:57 Msec=0 True Az=89.685 Ze=156.96 Az status=0009 Ze status=0009 14:59:57 Check angles 14:59:57 SkyScan query 14:59:58 SkyScan query done: ret=0 az=72.3<-4820 ze=135.99<-2934 Statuses=0009 0009 14:59:58 Msec=750 True Az=72.3 Ze=135.99 Az status=0009 Ze status=0009 14:59:58 Check angles 14:59:58 SkyScan query 14:59:58 SkyScan query done: ret=0 az=54.84<-3656 ze=115.035<-4331 Statuses=0009 0009 14:59:58 Msec=1500 True Az=54.84 Ze=115.035 Az status=0009 Ze status=0009 14:59:58 Check angles 14:59:58 SkyScan query 14:59:59 SkyScan query done: ret=0 az=40.845<-2723 ze=94.08<-5728 Statuses=0009 0009 14:59:59 Msec=2250 True Az=40.845 Ze=94.08 Az status=0009 Ze status=0009 14:59:59 Check angles 14:59:59 SkyScan query 15:00:00 SkyScan query done: ret=0 az=41.01<-2734 ze=73.125<-7125 Statuses=0008 0009 15:00:00 Msec=3000 True Az=41.01 Ze=73.125 Az status=0008 Ze status=0009 15:00:00 Check angles 15:00:00 SkyScan query 15:00:01 SkyScan query done: ret=0 az=40.995<-2733 ze=52.65<-8490 Statuses=0008 0009 15:00:01 Msec=3750 True Az=40.995 Ze=52.65 Az status=0008 Ze status=0009 15:00:01 Check angles 15:00:01 SkyScan query 15:00:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:00:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:00:01 Message to Master queued w/err=0: serial=12926 error=0 15:00:06 Received message from Master: op=Filter serial=12927 15:00:06 Color wheel filter change from 0 to 0 15:00:06 FLIGetFilterPos err=0 currentPosition=0 15:00:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:06 Filter is already there-color wheel unchanged 15:00:06 Received message from Master: op=Shutter serial=12928 15:00:06 Shutter LASER close 15:00:07 Received message from Camera: op=State serial=12930 15:00:07 GetSingleValue result=40 Value=cccccccc 15:00:07 SkyScan query 15:00:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:00:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:07 Parameters OK 15:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:07 Set A/D data flow result=40 15:00:07 Set A/D channel type result=40 15:00:07 Set A/D encoding result=40 15:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:07 Set channel filter=0.000000e+000 result=40 15:00:07 Config A/D Result=40 15:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:07 Get A/D filter: -9.255963e+061 result=40 15:00:07 Get A/D value=-858993460 result=40 15:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:07 Parameters OK 15:00:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:07 Set A/D data flow result=40 15:00:07 Set A/D channel type result=40 15:00:07 Set A/D encoding result=40 15:00:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:07 Set channel filter=0.000000e+000 result=40 15:00:07 Config A/D Result=40 15:00:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:07 Get A/D filter: -9.255963e+061 result=40 15:00:07 Get A/D value=-858993460 result=40 15:00:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:07 Aux= [UTC 2018-12-4 15:00:07] 15:00:07 Message to Camera, serial 12930 queued 15:00:38 Received message from Master: op=PointingHead serial=12937 15:00:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:00:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:00:38 Point started: ret=0 15:00:38 point_skyscan result=0 15:00:39 Check angles 15:00:39 SkyScan query 15:00:40 SkyScan query done: ret=0 az=64.38<-4292 ze=66.555<-7563 Statuses=0009 0008 15:00:40 Msec=0 True Az=64.38 Ze=66.555 Az status=0009 Ze status=0008 15:00:40 Check angles 15:00:40 SkyScan query 15:00:41 SkyScan query done: ret=0 az=82.515<-5501 ze=66.495<-7567 Statuses=0009 0008 15:00:41 Msec=750 True Az=82.515 Ze=66.495 Az status=0009 Ze status=0008 15:00:41 Check angles 15:00:41 SkyScan query 15:00:41 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 15:00:41 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 15:00:42 Check angles 15:00:42 SkyScan query 15:00:42 SkyScan query done: ret=0 az=117.18<-7812 ze=66.495<-7567 Statuses=0009 0008 15:00:42 Msec=2250 True Az=117.18 Ze=66.495 Az status=0009 Ze status=0008 15:00:42 Check angles 15:00:42 SkyScan query 15:00:43 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 15:00:43 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 15:00:43 Check angles 15:00:43 SkyScan query 15:00:44 SkyScan query done: ret=0 az=152.07<-10138 ze=66.495<-7567 Statuses=0009 0008 15:00:44 Msec=3750 True Az=152.07 Ze=66.495 Az status=0009 Ze status=0008 15:00:44 Check angles 15:00:44 SkyScan query 15:00:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:00:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:00:44 Message to Master queued w/err=0: serial=12937 error=0 15:00:49 Received message from Master: op=Filter serial=12938 15:00:49 Color wheel filter change from 0 to 0 15:00:49 FLIGetFilterPos err=0 currentPosition=0 15:00:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:00:49 Filter is already there-color wheel unchanged 15:00:50 Received message from Master: op=Shutter serial=12939 15:00:50 Shutter LASER close 15:00:50 Received message from Camera: op=State serial=12941 15:00:50 GetSingleValue result=40 Value=cccccccc 15:00:50 SkyScan query 15:00:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:00:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:50 Parameters OK 15:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:50 Set A/D data flow result=40 15:00:50 Set A/D channel type result=40 15:00:50 Set A/D encoding result=40 15:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:50 Set channel filter=0.000000e+000 result=40 15:00:50 Config A/D Result=40 15:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:50 Get A/D filter: -9.255963e+061 result=40 15:00:50 Get A/D value=-858993460 result=40 15:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:00:50 Parameters OK 15:00:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:00:50 Set A/D data flow result=40 15:00:50 Set A/D channel type result=40 15:00:50 Set A/D encoding result=40 15:00:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:00:50 Set channel filter=0.000000e+000 result=40 15:00:50 Config A/D Result=40 15:00:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:00:50 Get A/D filter: -9.255963e+061 result=40 15:00:50 Get A/D value=-858993460 result=40 15:00:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:00:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:00:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:00:50 Aux= 15:00:50 Message to Camera, serial 12941 queued 15:01:21 Received message from Master: op=PointingHead serial=12948 15:01:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:01:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:01:21 Point started: ret=0 15:01:21 point_skyscan result=0 15:01:22 Check angles 15:01:22 SkyScan query 15:01:23 SkyScan query done: ret=0 az=134.925<-8995 ze=36.855<-9543 Statuses=0009 0009 15:01:23 Msec=0 True Az=134.925 Ze=36.855 Az status=0009 Ze status=0009 15:01:23 Check angles 15:01:23 SkyScan query 15:01:23 SkyScan query done: ret=0 az=117.105<-7807 ze=15.465<-10969 Statuses=0009 0009 15:01:23 Msec=750 True Az=117.105 Ze=15.465 Az status=0009 Ze status=0009 15:01:24 Check angles 15:01:24 SkyScan query 15:01:24 SkyScan query done: ret=0 az=99.765<-6651 ze=-5.52<-12368 Statuses=0009 0009 15:01:24 Msec=1500 True Az=99.765 Ze=-5.52 Az status=0009 Ze status=0009 15:01:24 Check angles 15:01:24 SkyScan query 15:01:25 SkyScan query done: ret=0 az=82.275<-5485 ze=-26.46<-13764 Statuses=0009 0009 15:01:25 Msec=2250 True Az=82.275 Ze=-26.46 Az status=0009 Ze status=0009 15:01:25 Check angles 15:01:25 SkyScan query 15:01:26 SkyScan query done: ret=0 az=64.725<-4315 ze=-38.565<-14571 Statuses=0009 0008 15:01:26 Msec=3000 True Az=64.725 Ze=-38.565 Az status=0009 Ze status=0008 15:01:26 Check angles 15:01:26 SkyScan query 15:01:26 SkyScan query done: ret=0 az=47.295<-3153 ze=-38.535<-14569 Statuses=0009 0008 15:01:26 Msec=3750 True Az=47.295 Ze=-38.535 Az status=0009 Ze status=0008 15:01:27 Check angles 15:01:27 SkyScan query 15:01:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:01:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:01:27 Message to Master queued w/err=0: serial=12948 error=0 15:01:32 Received message from Master: op=Filter serial=12949 15:01:32 Color wheel filter change from 0 to 0 15:01:32 FLIGetFilterPos err=0 currentPosition=0 15:01:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:01:32 Filter is already there-color wheel unchanged 15:01:32 Received message from Master: op=Shutter serial=12950 15:01:32 Shutter LASER close 15:01:32 Received message from Camera: op=State serial=12952 15:01:32 GetSingleValue result=40 Value=cccccccc 15:01:32 SkyScan query 15:01:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:01:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:33 Parameters OK 15:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:33 Set A/D data flow result=40 15:01:33 Set A/D channel type result=40 15:01:33 Set A/D encoding result=40 15:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:33 Set channel filter=0.000000e+000 result=40 15:01:33 Config A/D Result=40 15:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:33 Get A/D filter: -9.255963e+061 result=40 15:01:33 Get A/D value=-858993460 result=40 15:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:01:33 Parameters OK 15:01:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:01:33 Set A/D data flow result=40 15:01:33 Set A/D channel type result=40 15:01:33 Set A/D encoding result=40 15:01:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:01:33 Set channel filter=0.000000e+000 result=40 15:01:33 Config A/D Result=40 15:01:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:01:33 Get A/D filter: -9.255963e+061 result=40 15:01:33 Get A/D value=-858993460 result=40 15:01:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:01:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:01:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:01:33 Aux= 15:01:33 Message to Camera, serial 12952 queued 15:02:04 Received message from Master: op=PointingHead serial=12959 15:02:04 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:02:04 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:02:04 Point started: ret=0 15:02:04 point_skyscan result=0 15:02:05 Check angles 15:02:05 SkyScan query 15:02:05 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.13<-16542 Statuses=0009 0009 15:02:05 Msec=0 True Az=63.75 Ze=-68.13 Az status=0009 Ze status=0009 15:02:06 Check angles 15:02:06 SkyScan query 15:02:06 SkyScan query done: ret=0 az=81.75<-5450 ze=-89.52<-17968 Statuses=0009 0009 15:02:06 Msec=750 True Az=81.75 Ze=-89.52 Az status=0009 Ze status=0009 15:02:06 Check angles 15:02:06 SkyScan query 15:02:07 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.475<-19365 Statuses=0009 0009 15:02:07 Msec=1500 True Az=99.285 Ze=-110.475 Az status=0009 Ze status=0009 15:02:07 Check angles 15:02:07 SkyScan query 15:02:08 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.4<-20760 Statuses=0009 0009 15:02:08 Msec=2250 True Az=116.76 Ze=-131.4 Az status=0009 Ze status=0009 15:02:08 Check angles 15:02:08 SkyScan query 15:02:09 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.525<-21435 Statuses=0009 0008 15:02:09 Msec=3000 True Az=131.115 Ze=-141.525 Az status=0009 Ze status=0008 15:02:09 Check angles 15:02:09 SkyScan query 15:02:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:02:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:02:09 Message to Master queued w/err=0: serial=12959 error=0 15:02:14 Received message from Master: op=Filter serial=12960 15:02:14 Color wheel filter change from 0 to 0 15:02:14 FLIGetFilterPos err=0 currentPosition=0 15:02:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:14 Filter is already there-color wheel unchanged 15:02:14 Received message from Master: op=Shutter serial=12961 15:02:14 Shutter LASER close 15:02:14 Received message from Camera: op=State serial=12963 15:02:14 GetSingleValue result=40 Value=cccccccc 15:02:14 SkyScan query 15:02:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:02:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:15 Parameters OK 15:02:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:15 Set A/D data flow result=40 15:02:15 Set A/D channel type result=40 15:02:15 Set A/D encoding result=40 15:02:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:15 Set channel filter=0.000000e+000 result=40 15:02:15 Config A/D Result=40 15:02:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:15 Get A/D filter: -9.255963e+061 result=40 15:02:15 Get A/D value=-858993460 result=40 15:02:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:15 Parameters OK 15:02:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:15 Set A/D data flow result=40 15:02:15 Set A/D channel type result=40 15:02:15 Set A/D encoding result=40 15:02:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:15 Set channel filter=0.000000e+000 result=40 15:02:15 Config A/D Result=40 15:02:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:15 Get A/D filter: -9.255963e+061 result=40 15:02:15 Get A/D value=-858993460 result=40 15:02:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:15 Aux= 15:02:15 Message to Camera, serial 12963 queued 15:02:46 Received message from Master: op=PointingHead serial=12970 15:02:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:02:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:02:46 Point started: ret=0 15:02:46 point_skyscan result=0 15:02:47 Check angles 15:02:47 SkyScan query 15:02:48 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.955<-23397 Statuses=0009 0009 15:02:48 Msec=0 True Az=113.025 Ze=-170.955 Az status=0009 Ze status=0009 15:02:48 Check angles 15:02:48 SkyScan query 15:02:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:02:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:02:48 Message to Master queued w/err=0: serial=12970 error=0 15:02:53 Received message from Master: op=Filter serial=12971 15:02:53 Color wheel filter change from 0 to 0 15:02:53 FLIGetFilterPos err=0 currentPosition=0 15:02:53 FLIGetStepsRemaining err=0 RemainingSteps=0 15:02:53 Filter is already there-color wheel unchanged 15:02:53 Received message from Master: op=Shutter serial=12972 15:02:53 Shutter LASER open 15:02:54 Received message from Camera: op=State serial=12974 15:02:54 GetSingleValue result=40 Value=cccccccc 15:02:54 SkyScan query 15:02:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:02:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:54 Parameters OK 15:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:54 Set A/D data flow result=40 15:02:54 Set A/D channel type result=40 15:02:54 Set A/D encoding result=40 15:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:54 Set channel filter=0.000000e+000 result=40 15:02:54 Config A/D Result=40 15:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:54 Get A/D filter: -9.255963e+061 result=40 15:02:54 Get A/D value=-858993460 result=40 15:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:02:54 Parameters OK 15:02:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:02:54 Set A/D data flow result=40 15:02:54 Set A/D channel type result=40 15:02:54 Set A/D encoding result=40 15:02:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:02:54 Set channel filter=0.000000e+000 result=40 15:02:54 Config A/D Result=40 15:02:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:02:54 Get A/D filter: -9.255963e+061 result=40 15:02:54 Get A/D value=-858993460 result=40 15:02:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:02:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:02:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:02:54 Aux= 15:02:54 Message to Camera, serial 12974 queued 15:02:57 Received message from Master: op=Shutter serial=12978 15:02:57 Shutter LASER close 15:02:57 Received message from Master: op=PointingHead serial=12982 15:02:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:02:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:02:58 Point started: ret=0 15:02:58 point_skyscan result=0 15:02:58 Check angles 15:02:58 SkyScan query 15:02:59 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.55<-21570 Statuses=0009 0009 15:02:59 Msec=0 True Az=135.72 Ze=-143.55 Az status=0009 Ze status=0009 15:02:59 Check angles 15:02:59 SkyScan query 15:03:00 SkyScan query done: ret=0 az=153.165<-10211 ze=-122.595<-20173 Statuses=0009 0009 15:03:00 Msec=750 True Az=153.165 Ze=-122.595 Az status=0009 Ze status=0009 15:03:00 Check angles 15:03:00 SkyScan query 15:03:00 SkyScan query done: ret=0 az=170.715<-11381 ze=-101.655<-18777 Statuses=0009 0009 15:03:00 Msec=1500 True Az=170.715 Ze=-101.655 Az status=0009 Ze status=0009 15:03:01 Check angles 15:03:01 SkyScan query 15:03:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.67<-17378 Statuses=0008 0009 15:03:01 Msec=2250 True Az=176.025 Ze=-80.67 Az status=0008 Ze status=0009 15:03:01 Check angles 15:03:01 SkyScan query 15:03:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.715<-15981 Statuses=0008 0009 15:03:02 Msec=3000 True Az=175.995 Ze=-59.715 Az status=0008 Ze status=0009 15:03:02 Check angles 15:03:02 SkyScan query 15:03:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:03:03 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:03:03 Message to Master queued w/err=0: serial=12982 error=0 15:03:08 Received message from Master: op=Filter serial=12983 15:03:08 Color wheel filter change from 0 to 0 15:03:08 FLIGetFilterPos err=0 currentPosition=0 15:03:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:08 Filter is already there-color wheel unchanged 15:03:08 Received message from Master: op=Shutter serial=12984 15:03:08 Shutter LASER close 15:03:08 Received message from Camera: op=State serial=12986 15:03:08 GetSingleValue result=40 Value=cccccccc 15:03:08 SkyScan query 15:03:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:03:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:09 Parameters OK 15:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:09 Set A/D data flow result=40 15:03:09 Set A/D channel type result=40 15:03:09 Set A/D encoding result=40 15:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:09 Set channel filter=0.000000e+000 result=40 15:03:09 Config A/D Result=40 15:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:09 Get A/D filter: -9.255963e+061 result=40 15:03:09 Get A/D value=-858993460 result=40 15:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:09 Parameters OK 15:03:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:09 Set A/D data flow result=40 15:03:09 Set A/D channel type result=40 15:03:09 Set A/D encoding result=40 15:03:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:09 Set channel filter=0.000000e+000 result=40 15:03:09 Config A/D Result=40 15:03:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:09 Get A/D filter: -9.255963e+061 result=40 15:03:09 Get A/D value=-858993460 result=40 15:03:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:09 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:09 Aux= 15:03:09 Message to Camera, serial 12986 queued 15:03:39 Received message from Master: op=PointingHead serial=12993 15:03:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:03:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:03:40 Point started: ret=0 15:03:40 point_skyscan result=0 15:03:41 Check angles 15:03:41 SkyScan query 15:03:41 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.825<-13455 Statuses=0009 0009 15:03:41 Msec=0 True Az=152.97 Ze=-21.825 Az status=0009 Ze status=0009 15:03:41 Check angles 15:03:41 SkyScan query 15:03:42 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.855<-12057 Statuses=0009 0009 15:03:42 Msec=750 True Az=135.69 Ze=-0.855 Az status=0009 Ze status=0009 15:03:42 Check angles 15:03:42 SkyScan query 15:03:43 SkyScan query done: ret=0 az=118.11<-7874 ze=20.115<-10659 Statuses=0009 0009 15:03:43 Msec=1500 True Az=118.11 Ze=20.115 Az status=0009 Ze status=0009 15:03:43 Check angles 15:03:43 SkyScan query 15:03:43 SkyScan query done: ret=0 az=100.68<-6712 ze=41.055<-9263 Statuses=0009 0009 15:03:43 Msec=2250 True Az=100.68 Ze=41.055 Az status=0009 Ze status=0009 15:03:44 Check angles 15:03:44 SkyScan query 15:03:44 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 15:03:44 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 15:03:44 Check angles 15:03:44 SkyScan query 15:03:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:03:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:03:45 Message to Master queued w/err=0: serial=12993 error=0 15:03:50 Received message from Master: op=Filter serial=12994 15:03:50 Color wheel filter change from 0 to 0 15:03:50 FLIGetFilterPos err=0 currentPosition=0 15:03:50 FLIGetStepsRemaining err=0 RemainingSteps=0 15:03:50 Filter is already there-color wheel unchanged 15:03:50 Received message from Master: op=Shutter serial=12995 15:03:50 Shutter LASER close 15:03:50 Received message from Camera: op=State serial=12997 15:03:50 GetSingleValue result=40 Value=cccccccc 15:03:50 SkyScan query 15:03:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:03:51 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:51 Parameters OK 15:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:51 Set A/D data flow result=40 15:03:51 Set A/D channel type result=40 15:03:51 Set A/D encoding result=40 15:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:51 Set channel filter=0.000000e+000 result=40 15:03:51 Config A/D Result=40 15:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:51 Get A/D filter: -9.255963e+061 result=40 15:03:51 Get A/D value=-858993460 result=40 15:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:51 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:03:51 Parameters OK 15:03:51 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:03:51 Set A/D data flow result=40 15:03:51 Set A/D channel type result=40 15:03:51 Set A/D encoding result=40 15:03:51 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:03:51 Set channel filter=0.000000e+000 result=40 15:03:51 Config A/D Result=40 15:03:51 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:03:51 Get A/D filter: -9.255963e+061 result=40 15:03:51 Get A/D value=-858993460 result=40 15:03:51 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:03:51 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:03:51 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:03:51 Aux= 15:03:51 Message to Camera, serial 12997 queued 15:04:21 Received message from Master: op=PointingHead serial=13004 15:04:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:04:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:04:22 Point started: ret=0 15:04:22 point_skyscan result=0 15:04:23 Check angles 15:04:23 SkyScan query 15:04:23 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 15:04:23 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 15:04:23 Check angles 15:04:23 SkyScan query 15:04:24 SkyScan query done: ret=0 az=126.465<-8431 ze=38.505<-9433 Statuses=0009 0008 15:04:24 Msec=750 True Az=126.465 Ze=38.505 Az status=0009 Ze status=0008 15:04:24 Check angles 15:04:24 SkyScan query 15:04:25 SkyScan query done: ret=0 az=143.94<-9596 ze=38.505<-9433 Statuses=0009 0008 15:04:25 Msec=1500 True Az=143.94 Ze=38.505 Az status=0009 Ze status=0008 15:04:25 Check angles 15:04:25 SkyScan query 15:04:25 SkyScan query done: ret=0 az=161.325<-10755 ze=38.505<-9433 Statuses=0009 0008 15:04:25 Msec=2250 True Az=161.325 Ze=38.505 Az status=0009 Ze status=0008 15:04:26 Check angles 15:04:26 SkyScan query 15:04:26 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 15:04:26 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 15:04:26 Check angles 15:04:26 SkyScan query 15:04:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:04:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:04:27 Message to Master queued w/err=0: serial=13004 error=0 15:04:32 Received message from Master: op=Filter serial=13005 15:04:32 Color wheel filter change from 0 to 0 15:04:32 FLIGetFilterPos err=0 currentPosition=0 15:04:32 FLIGetStepsRemaining err=0 RemainingSteps=0 15:04:32 Filter is already there-color wheel unchanged 15:04:32 Received message from Master: op=Shutter serial=13006 15:04:32 Shutter LASER close 15:04:32 Received message from Camera: op=State serial=13008 15:04:32 GetSingleValue result=40 Value=cccccccc 15:04:32 SkyScan query 15:04:33 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:04:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:33 Parameters OK 15:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:33 Set A/D data flow result=40 15:04:33 Set A/D channel type result=40 15:04:33 Set A/D encoding result=40 15:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:33 Set channel filter=0.000000e+000 result=40 15:04:33 Config A/D Result=40 15:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:33 Get A/D filter: -9.255963e+061 result=40 15:04:33 Get A/D value=-858993460 result=40 15:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:04:33 Parameters OK 15:04:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:04:33 Set A/D data flow result=40 15:04:33 Set A/D channel type result=40 15:04:33 Set A/D encoding result=40 15:04:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:04:33 Set channel filter=0.000000e+000 result=40 15:04:33 Config A/D Result=40 15:04:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:04:33 Get A/D filter: -9.255963e+061 result=40 15:04:33 Get A/D value=-858993460 result=40 15:04:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:04:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:04:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:04:33 Aux= 15:04:33 Message to Camera, serial 13008 queued 15:05:04 Received message from Master: op=PointingHead serial=13015 15:05:04 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:05:04 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:05:04 Point started: ret=0 15:05:04 point_skyscan result=0 15:05:05 Check angles 15:05:05 SkyScan query 15:05:05 SkyScan query done: ret=0 az=152.76<-10184 ze=8.28<-11448 Statuses=0009 0009 15:05:05 Msec=0 True Az=152.76 Ze=8.28 Az status=0009 Ze status=0009 15:05:05 Check angles 15:05:05 SkyScan query 15:05:06 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.675<-12845 Statuses=0009 0009 15:05:06 Msec=750 True Az=135.24 Ze=-12.675 Az status=0009 Ze status=0009 15:05:06 Check angles 15:05:06 SkyScan query 15:05:07 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.6<-14240 Statuses=0009 0009 15:05:07 Msec=1500 True Az=117.615 Ze=-33.6 Az status=0009 Ze status=0009 15:05:07 Check angles 15:05:07 SkyScan query 15:05:07 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.54<-15436 Statuses=0009 0009 15:05:07 Msec=2250 True Az=100.23 Ze=-51.54 Az status=0009 Ze status=0009 15:05:08 Check angles 15:05:08 SkyScan query 15:05:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:05:08 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:05:08 Check angles 15:05:08 SkyScan query 15:05:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:05:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:05:09 Message to Master queued w/err=0: serial=13015 error=0 15:05:14 Received message from Master: op=Filter serial=13016 15:05:14 Color wheel filter change from 0 to 0 15:05:14 FLIGetFilterPos err=0 currentPosition=0 15:05:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:14 Filter is already there-color wheel unchanged 15:05:14 Received message from Master: op=Shutter serial=13017 15:05:14 Shutter LASER close 15:05:14 Received message from Camera: op=State serial=13019 15:05:14 GetSingleValue result=40 Value=cccccccc 15:05:14 SkyScan query 15:05:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:05:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:15 Parameters OK 15:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:15 Set A/D data flow result=40 15:05:15 Set A/D channel type result=40 15:05:15 Set A/D encoding result=40 15:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:15 Set channel filter=0.000000e+000 result=40 15:05:15 Config A/D Result=40 15:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:15 Get A/D filter: -9.255963e+061 result=40 15:05:15 Get A/D value=-858993460 result=40 15:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:15 Parameters OK 15:05:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:15 Set A/D data flow result=40 15:05:15 Set A/D channel type result=40 15:05:15 Set A/D encoding result=40 15:05:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:15 Set channel filter=0.000000e+000 result=40 15:05:15 Config A/D Result=40 15:05:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:15 Get A/D filter: -9.255963e+061 result=40 15:05:15 Get A/D value=-858993460 result=40 15:05:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:15 Aux= 15:05:15 Message to Camera, serial 13019 queued 15:05:46 Received message from Master: op=PointingHead serial=13026 15:05:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:05:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:05:46 Point started: ret=0 15:05:46 point_skyscan result=0 15:05:47 Check angles 15:05:47 SkyScan query 15:05:47 SkyScan query done: ret=0 az=108.825<-7255 ze=-81.105<-17407 Statuses=0009 0009 15:05:47 Msec=0 True Az=108.825 Ze=-81.105 Az status=0009 Ze status=0009 15:05:47 Check angles 15:05:47 SkyScan query 15:05:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.48<-18832 Statuses=0008 0009 15:05:48 Msec=750 True Az=112.995 Ze=-102.48 Az status=0008 Ze status=0009 15:05:48 Check angles 15:05:48 SkyScan query 15:05:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 15:05:49 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 15:05:49 Check angles 15:05:49 SkyScan query 15:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.375<-21625 Statuses=0008 0009 15:05:50 Msec=2250 True Az=112.995 Ze=-144.375 Az status=0008 Ze status=0009 15:05:50 Check angles 15:05:50 SkyScan query 15:05:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 15:05:50 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 15:05:50 Check angles 15:05:50 SkyScan query 15:05:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:05:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:05:51 Message to Master queued w/err=0: serial=13026 error=0 15:05:56 Received message from Master: op=Filter serial=13027 15:05:56 Color wheel filter change from 0 to 0 15:05:56 FLIGetFilterPos err=0 currentPosition=0 15:05:56 FLIGetStepsRemaining err=0 RemainingSteps=0 15:05:56 Filter is already there-color wheel unchanged 15:05:56 Received message from Master: op=Shutter serial=13028 15:05:56 Shutter LASER open 15:05:56 Received message from Camera: op=State serial=13030 15:05:56 GetSingleValue result=40 Value=cccccccc 15:05:56 SkyScan query 15:05:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:05:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:57 Parameters OK 15:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:57 Set A/D data flow result=40 15:05:57 Set A/D channel type result=40 15:05:57 Set A/D encoding result=40 15:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:57 Set channel filter=0.000000e+000 result=40 15:05:57 Config A/D Result=40 15:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:57 Get A/D filter: -9.255963e+061 result=40 15:05:57 Get A/D value=-858993460 result=40 15:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:05:57 Parameters OK 15:05:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:05:57 Set A/D data flow result=40 15:05:57 Set A/D channel type result=40 15:05:57 Set A/D encoding result=40 15:05:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:05:57 Set channel filter=0.000000e+000 result=40 15:05:57 Config A/D Result=40 15:05:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:05:57 Get A/D filter: -9.255963e+061 result=40 15:05:57 Get A/D value=-858993460 result=40 15:05:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:05:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:05:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:05:57 Aux= 15:05:57 Message to Camera, serial 13030 queued 15:05:59 Received message from Master: op=Shutter serial=13034 15:05:59 Shutter LASER close 15:06:00 Received message from Master: op=PointingHead serial=13038 15:06:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:06:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:06:00 Point started: ret=0 15:06:00 point_skyscan result=0 15:06:01 Check angles 15:06:01 SkyScan query 15:06:02 SkyScan query done: ret=0 az=89.97<-5998 ze=157.56<-1496 Statuses=0009 0009 15:06:02 Msec=0 True Az=89.97 Ze=157.56 Az status=0009 Ze status=0009 15:06:02 Check angles 15:06:02 SkyScan query 15:06:02 SkyScan query done: ret=0 az=72.645<-4843 ze=136.53<-2898 Statuses=0009 0009 15:06:02 Msec=750 True Az=72.645 Ze=136.53 Az status=0009 Ze status=0009 15:06:03 Check angles 15:06:03 SkyScan query 15:06:03 SkyScan query done: ret=0 az=54.9<-3660 ze=115.23<-4318 Statuses=0009 0009 15:06:03 Msec=1500 True Az=54.9 Ze=115.23 Az status=0009 Ze status=0009 15:06:03 Check angles 15:06:03 SkyScan query 15:06:04 SkyScan query done: ret=0 az=40.845<-2723 ze=94.245<-5717 Statuses=0009 0009 15:06:04 Msec=2250 True Az=40.845 Ze=94.245 Az status=0009 Ze status=0009 15:06:04 Check angles 15:06:04 SkyScan query 15:06:05 SkyScan query done: ret=0 az=40.995<-2733 ze=73.305<-7113 Statuses=0008 0009 15:06:05 Msec=3000 True Az=40.995 Ze=73.305 Az status=0008 Ze status=0009 15:06:05 Check angles 15:06:05 SkyScan query 15:06:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.77<-8482 Statuses=0008 0009 15:06:05 Msec=3750 True Az=40.995 Ze=52.77 Az status=0008 Ze status=0009 15:06:06 Check angles 15:06:06 SkyScan query 15:06:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:06:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:06:06 Message to Master queued w/err=0: serial=13038 error=0 15:06:11 Received message from Master: op=Filter serial=13039 15:06:11 Color wheel filter change from 0 to 0 15:06:11 FLIGetFilterPos err=0 currentPosition=0 15:06:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:11 Filter is already there-color wheel unchanged 15:06:11 Received message from Master: op=Shutter serial=13040 15:06:11 Shutter LASER close 15:06:11 Received message from Camera: op=State serial=13042 15:06:11 GetSingleValue result=40 Value=cccccccc 15:06:11 SkyScan query 15:06:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:06:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:12 Parameters OK 15:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:12 Set A/D data flow result=40 15:06:12 Set A/D channel type result=40 15:06:12 Set A/D encoding result=40 15:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:12 Set channel filter=0.000000e+000 result=40 15:06:12 Config A/D Result=40 15:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:12 Get A/D filter: -9.255963e+061 result=40 15:06:12 Get A/D value=-858993460 result=40 15:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:12 Parameters OK 15:06:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:12 Set A/D data flow result=40 15:06:12 Set A/D channel type result=40 15:06:12 Set A/D encoding result=40 15:06:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:12 Set channel filter=0.000000e+000 result=40 15:06:12 Config A/D Result=40 15:06:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:12 Get A/D filter: -9.255963e+061 result=40 15:06:12 Get A/D value=-858993460 result=40 15:06:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:12 Aux= 15:06:12 Message to Camera, serial 13042 queued 15:06:43 Received message from Master: op=PointingHead serial=13049 15:06:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:06:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:06:43 Point started: ret=0 15:06:43 point_skyscan result=0 15:06:44 Check angles 15:06:44 SkyScan query 15:06:45 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 15:06:45 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 15:06:45 Check angles 15:06:45 SkyScan query 15:06:45 SkyScan query done: ret=0 az=81.15<-5410 ze=66.495<-7567 Statuses=0009 0008 15:06:45 Msec=750 True Az=81.15 Ze=66.495 Az status=0009 Ze status=0008 15:06:45 Check angles 15:06:45 SkyScan query 15:06:46 SkyScan query done: ret=0 az=98.835<-6589 ze=66.495<-7567 Statuses=0009 0008 15:06:46 Msec=1500 True Az=98.835 Ze=66.495 Az status=0009 Ze status=0008 15:06:46 Check angles 15:06:46 SkyScan query 15:06:47 SkyScan query done: ret=0 az=116.22<-7748 ze=66.495<-7567 Statuses=0009 0008 15:06:47 Msec=2250 True Az=116.22 Ze=66.495 Az status=0009 Ze status=0008 15:06:47 Check angles 15:06:47 SkyScan query 15:06:48 SkyScan query done: ret=0 az=133.635<-8909 ze=66.495<-7567 Statuses=0009 0008 15:06:48 Msec=3000 True Az=133.635 Ze=66.495 Az status=0009 Ze status=0008 15:06:48 Check angles 15:06:48 SkyScan query 15:06:48 SkyScan query done: ret=0 az=151.02<-10068 ze=66.495<-7567 Statuses=0009 0008 15:06:48 Msec=3750 True Az=151.02 Ze=66.495 Az status=0009 Ze status=0008 15:06:48 Check angles 15:06:48 SkyScan query 15:06:49 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:06:49 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:06:49 Message to Master queued w/err=0: serial=13049 error=0 15:06:54 Received message from Master: op=Filter serial=13050 15:06:54 Color wheel filter change from 0 to 0 15:06:54 FLIGetFilterPos err=0 currentPosition=0 15:06:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:06:54 Filter is already there-color wheel unchanged 15:06:54 Received message from Master: op=Shutter serial=13051 15:06:54 Shutter LASER close 15:06:54 Received message from Camera: op=State serial=13053 15:06:54 GetSingleValue result=40 Value=cccccccc 15:06:54 SkyScan query 15:06:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:06:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:55 Parameters OK 15:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:55 Set A/D data flow result=40 15:06:55 Set A/D channel type result=40 15:06:55 Set A/D encoding result=40 15:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:55 Set channel filter=0.000000e+000 result=40 15:06:55 Config A/D Result=40 15:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:55 Get A/D filter: -9.255963e+061 result=40 15:06:55 Get A/D value=-858993460 result=40 15:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:06:55 Parameters OK 15:06:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:06:55 Set A/D data flow result=40 15:06:55 Set A/D channel type result=40 15:06:55 Set A/D encoding result=40 15:06:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:06:55 Set channel filter=0.000000e+000 result=40 15:06:55 Config A/D Result=40 15:06:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:06:55 Get A/D filter: -9.255963e+061 result=40 15:06:55 Get A/D value=-858993460 result=40 15:06:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:06:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:06:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:06:55 Aux= 15:06:55 Message to Camera, serial 13053 queued 15:07:26 Received message from Master: op=PointingHead serial=13060 15:07:26 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:07:26 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:07:26 Point started: ret=0 15:07:26 point_skyscan result=0 15:07:27 Check angles 15:07:27 SkyScan query 15:07:27 SkyScan query done: ret=0 az=135.135<-9009 ze=36.72<-9552 Statuses=0009 0009 15:07:27 Msec=0 True Az=135.135 Ze=36.72 Az status=0009 Ze status=0009 15:07:28 Check angles 15:07:28 SkyScan query 15:07:28 SkyScan query done: ret=0 az=117.105<-7807 ze=15.375<-10975 Statuses=0009 0009 15:07:28 Msec=750 True Az=117.105 Ze=15.375 Az status=0009 Ze status=0009 15:07:28 Check angles 15:07:28 SkyScan query 15:07:29 SkyScan query done: ret=0 az=99.48<-6632 ze=-6.045<-12403 Statuses=0009 0009 15:07:29 Msec=1500 True Az=99.48 Ze=-6.045 Az status=0009 Ze status=0009 15:07:29 Check angles 15:07:29 SkyScan query 15:07:30 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.985<-13799 Statuses=0009 0009 15:07:30 Msec=2250 True Az=82.035 Ze=-26.985 Az status=0009 Ze status=0009 15:07:30 Check angles 15:07:30 SkyScan query 15:07:30 SkyScan query done: ret=0 az=64.455<-4297 ze=-38.565<-14571 Statuses=0009 0008 15:07:30 Msec=3000 True Az=64.455 Ze=-38.565 Az status=0009 Ze status=0008 15:07:31 Check angles 15:07:31 SkyScan query 15:07:31 SkyScan query done: ret=0 az=46.65<-3110 ze=-38.535<-14569 Statuses=0009 0008 15:07:31 Msec=3750 True Az=46.65 Ze=-38.535 Az status=0009 Ze status=0008 15:07:31 Check angles 15:07:31 SkyScan query 15:07:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:07:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:07:32 Message to Master queued w/err=0: serial=13060 error=0 15:07:37 Received message from Master: op=Filter serial=13061 15:07:37 Color wheel filter change from 0 to 0 15:07:37 FLIGetFilterPos err=0 currentPosition=0 15:07:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:07:37 Filter is already there-color wheel unchanged 15:07:37 Received message from Master: op=Shutter serial=13062 15:07:37 Shutter LASER close 15:07:37 Received message from Camera: op=State serial=13064 15:07:37 GetSingleValue result=40 Value=cccccccc 15:07:37 SkyScan query 15:07:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:07:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:38 Parameters OK 15:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:38 Set A/D data flow result=40 15:07:38 Set A/D channel type result=40 15:07:38 Set A/D encoding result=40 15:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:38 Set channel filter=0.000000e+000 result=40 15:07:38 Config A/D Result=40 15:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:38 Get A/D filter: -9.255963e+061 result=40 15:07:38 Get A/D value=-858993460 result=40 15:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:07:38 Parameters OK 15:07:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:07:38 Set A/D data flow result=40 15:07:38 Set A/D channel type result=40 15:07:38 Set A/D encoding result=40 15:07:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:07:38 Set channel filter=0.000000e+000 result=40 15:07:38 Config A/D Result=40 15:07:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:07:38 Get A/D filter: -9.255963e+061 result=40 15:07:38 Get A/D value=-858993460 result=40 15:07:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:07:38 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:07:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:07:38 Aux= 15:07:38 Message to Camera, serial 13064 queued 15:08:09 Received message from Master: op=PointingHead serial=13071 15:08:09 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:08:09 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:08:09 Point started: ret=0 15:08:09 point_skyscan result=0 15:08:10 Check angles 15:08:10 SkyScan query 15:08:10 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.7<-16580 Statuses=0009 0009 15:08:10 Msec=0 True Az=64.17 Ze=-68.7 Az status=0009 Ze status=0009 15:08:10 Check angles 15:08:10 SkyScan query 15:08:11 SkyScan query done: ret=0 az=82.35<-5490 ze=-90.105<-18007 Statuses=0009 0009 15:08:11 Msec=750 True Az=82.35 Ze=-90.105 Az status=0009 Ze status=0009 15:08:11 Check angles 15:08:11 SkyScan query 15:08:12 SkyScan query done: ret=0 az=100.02<-6668 ze=-111.48<-19432 Statuses=0009 0009 15:08:12 Msec=1500 True Az=100.02 Ze=-111.48 Az status=0009 Ze status=0009 15:08:12 Check angles 15:08:12 SkyScan query 15:08:13 SkyScan query done: ret=0 az=117.48<-7832 ze=-132.42<-20828 Statuses=0009 0009 15:08:13 Msec=2250 True Az=117.48 Ze=-132.42 Az status=0009 Ze status=0009 15:08:13 Check angles 15:08:13 SkyScan query 15:08:13 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 15:08:13 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 15:08:13 Check angles 15:08:13 SkyScan query 15:08:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:08:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:08:14 Message to Master queued w/err=0: serial=13071 error=0 15:08:19 Received message from Master: op=Filter serial=13072 15:08:19 Color wheel filter change from 0 to 0 15:08:19 FLIGetFilterPos err=0 currentPosition=0 15:08:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:19 Filter is already there-color wheel unchanged 15:08:19 Received message from Master: op=Shutter serial=13073 15:08:19 Shutter LASER close 15:08:19 Received message from Camera: op=State serial=13075 15:08:19 GetSingleValue result=40 Value=cccccccc 15:08:19 SkyScan query 15:08:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:08:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:20 Parameters OK 15:08:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:20 Set A/D data flow result=40 15:08:20 Set A/D channel type result=40 15:08:20 Set A/D encoding result=40 15:08:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:20 Set channel filter=0.000000e+000 result=40 15:08:20 Config A/D Result=40 15:08:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:20 Get A/D filter: -9.255963e+061 result=40 15:08:20 Get A/D value=-858993460 result=40 15:08:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:20 Parameters OK 15:08:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:20 Set A/D data flow result=40 15:08:20 Set A/D channel type result=40 15:08:20 Set A/D encoding result=40 15:08:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:20 Set channel filter=0.000000e+000 result=40 15:08:20 Config A/D Result=40 15:08:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:20 Get A/D filter: -9.255963e+061 result=40 15:08:20 Get A/D value=-858993460 result=40 15:08:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:20 Aux= 15:08:20 Message to Camera, serial 13075 queued 15:08:51 Received message from Master: op=PointingHead serial=13082 15:08:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:08:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:08:51 Point started: ret=0 15:08:51 point_skyscan result=0 15:08:52 Check angles 15:08:52 SkyScan query 15:08:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.375<-23425 Statuses=0009 0009 15:08:52 Msec=0 True Az=113.01 Ze=-171.375 Az status=0009 Ze status=0009 15:08:53 Check angles 15:08:53 SkyScan query 15:08:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:08:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:08:53 Message to Master queued w/err=0: serial=13082 error=0 15:08:58 Received message from Master: op=Filter serial=13083 15:08:58 Color wheel filter change from 0 to 0 15:08:58 FLIGetFilterPos err=0 currentPosition=0 15:08:58 FLIGetStepsRemaining err=0 RemainingSteps=0 15:08:58 Filter is already there-color wheel unchanged 15:08:58 Received message from Master: op=Shutter serial=13084 15:08:58 Shutter LASER open 15:08:58 Received message from Camera: op=State serial=13086 15:08:58 GetSingleValue result=40 Value=cccccccc 15:08:58 SkyScan query 15:08:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:08:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:59 Parameters OK 15:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:59 Set A/D data flow result=40 15:08:59 Set A/D channel type result=40 15:08:59 Set A/D encoding result=40 15:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:59 Set channel filter=0.000000e+000 result=40 15:08:59 Config A/D Result=40 15:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:59 Get A/D filter: -9.255963e+061 result=40 15:08:59 Get A/D value=-858993460 result=40 15:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:08:59 Parameters OK 15:08:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:08:59 Set A/D data flow result=40 15:08:59 Set A/D channel type result=40 15:08:59 Set A/D encoding result=40 15:08:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:08:59 Set channel filter=0.000000e+000 result=40 15:08:59 Config A/D Result=40 15:08:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:08:59 Get A/D filter: -9.255963e+061 result=40 15:08:59 Get A/D value=-858993460 result=40 15:08:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:08:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:08:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:08:59 Aux= 15:08:59 Message to Camera, serial 13086 queued 15:09:01 Received message from Master: op=Shutter serial=13090 15:09:01 Shutter LASER close 15:09:02 Received message from Master: op=PointingHead serial=13094 15:09:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:09:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:09:02 Point started: ret=0 15:09:02 point_skyscan result=0 15:09:03 Check angles 15:09:03 SkyScan query 15:09:04 SkyScan query done: ret=0 az=135.765<-9051 ze=-143.415<-21561 Statuses=0009 0009 15:09:04 Msec=0 True Az=135.765 Ze=-143.415 Az status=0009 Ze status=0009 15:09:04 Check angles [UTC 2018-12-4 15:09:04] 15:09:04 SkyScan query 15:09:05 SkyScan query done: ret=0 az=155.085<-10339 ze=-120.255<-20017 Statuses=0009 0009 15:09:05 Msec=750 True Az=155.085 Ze=-120.255 Az status=0009 Ze status=0009 15:09:05 Check angles 15:09:05 SkyScan query 15:09:05 SkyScan query done: ret=0 az=171.165<-11411 ze=-101.1<-18740 Statuses=0009 0009 15:09:05 Msec=1500 True Az=171.165 Ze=-101.1 Az status=0009 Ze status=0009 15:09:05 Check angles 15:09:05 SkyScan query 15:09:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.145<-17343 Statuses=0008 0009 15:09:06 Msec=2250 True Az=176.025 Ze=-80.145 Az status=0008 Ze status=0009 15:09:06 Check angles 15:09:06 SkyScan query 15:09:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.725<-15915 Statuses=0008 0009 15:09:07 Msec=3000 True Az=175.995 Ze=-58.725 Az status=0008 Ze status=0009 15:09:07 Check angles 15:09:07 SkyScan query 15:09:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:09:08 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:09:08 Message to Master queued w/err=0: serial=13094 error=0 15:09:13 Received message from Master: op=Filter serial=13095 15:09:13 Color wheel filter change from 0 to 0 15:09:13 FLIGetFilterPos err=0 currentPosition=0 15:09:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:13 Filter is already there-color wheel unchanged 15:09:13 Received message from Master: op=Shutter serial=13096 15:09:13 Shutter LASER close 15:09:13 Received message from Camera: op=State serial=13098 15:09:13 GetSingleValue result=40 Value=cccccccc 15:09:13 SkyScan query 15:09:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:09:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:13 Parameters OK 15:09:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:13 Set A/D data flow result=40 15:09:13 Set A/D channel type result=40 15:09:13 Set A/D encoding result=40 15:09:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:13 Set channel filter=0.000000e+000 result=40 15:09:13 Config A/D Result=40 15:09:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:13 Get A/D filter: -9.255963e+061 result=40 15:09:13 Get A/D value=-858993460 result=40 15:09:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:13 Parameters OK 15:09:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:13 Set A/D data flow result=40 15:09:13 Set A/D channel type result=40 15:09:13 Set A/D encoding result=40 15:09:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:13 Set channel filter=0.000000e+000 result=40 15:09:13 Config A/D Result=40 15:09:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:13 Get A/D filter: -9.255963e+061 result=40 15:09:13 Get A/D value=-858993460 result=40 15:09:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:13 Aux= 15:09:13 Message to Camera, serial 13098 queued 15:09:44 Received message from Master: op=PointingHead serial=13105 15:09:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:09:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:09:45 Point started: ret=0 15:09:45 point_skyscan result=0 15:09:45 Check angles 15:09:45 SkyScan query 15:09:46 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.84<-13456 Statuses=0009 0009 15:09:46 Msec=0 True Az=152.97 Ze=-21.84 Az status=0009 Ze status=0009 15:09:46 Check angles 15:09:46 SkyScan query 15:09:47 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.855<-12057 Statuses=0009 0009 15:09:47 Msec=750 True Az=135.69 Ze=-0.855 Az status=0009 Ze status=0009 15:09:47 Check angles 15:09:47 SkyScan query 15:09:47 SkyScan query done: ret=0 az=118.125<-7875 ze=20.1<-10660 Statuses=0009 0009 15:09:47 Msec=1500 True Az=118.125 Ze=20.1 Az status=0009 Ze status=0009 15:09:48 Check angles 15:09:48 SkyScan query 15:09:48 SkyScan query done: ret=0 az=100.68<-6712 ze=41.04<-9264 Statuses=0009 0009 15:09:48 Msec=2250 True Az=100.68 Ze=41.04 Az status=0009 Ze status=0009 15:09:48 Check angles 15:09:48 SkyScan query 15:09:49 SkyScan query done: ret=0 az=86.025<-5735 ze=51.54<-8564 Statuses=0009 0008 15:09:49 Msec=3000 True Az=86.025 Ze=51.54 Az status=0009 Ze status=0008 15:09:49 Check angles 15:09:49 SkyScan query 15:09:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:09:50 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:09:50 Message to Master queued w/err=0: serial=13105 error=0 15:09:55 Received message from Master: op=Filter serial=13106 15:09:55 Color wheel filter change from 0 to 0 15:09:55 FLIGetFilterPos err=0 currentPosition=0 15:09:55 FLIGetStepsRemaining err=0 RemainingSteps=0 15:09:55 Filter is already there-color wheel unchanged 15:09:55 Received message from Master: op=Shutter serial=13107 15:09:55 Shutter LASER close 15:09:55 Received message from Camera: op=State serial=13109 15:09:55 GetSingleValue result=40 Value=cccccccc 15:09:55 SkyScan query 15:09:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:09:56 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:56 Parameters OK 15:09:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:56 Set A/D data flow result=40 15:09:56 Set A/D channel type result=40 15:09:56 Set A/D encoding result=40 15:09:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:56 Set channel filter=0.000000e+000 result=40 15:09:56 Config A/D Result=40 15:09:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:56 Get A/D filter: -9.255963e+061 result=40 15:09:56 Get A/D value=-858993460 result=40 15:09:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:56 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:09:56 Parameters OK 15:09:56 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:09:56 Set A/D data flow result=40 15:09:56 Set A/D channel type result=40 15:09:56 Set A/D encoding result=40 15:09:56 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:09:56 Set channel filter=0.000000e+000 result=40 15:09:56 Config A/D Result=40 15:09:56 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:09:56 Get A/D filter: -9.255963e+061 result=40 15:09:56 Get A/D value=-858993460 result=40 15:09:56 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:09:56 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:09:56 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:09:56 Aux= 15:09:56 Message to Camera, serial 13109 queued 15:10:26 Received message from Master: op=PointingHead serial=13116 15:10:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:10:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:10:27 Point started: ret=0 15:10:27 point_skyscan result=0 15:10:27 Check angles 15:10:27 SkyScan query 15:10:28 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 15:10:28 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 15:10:28 Check angles 15:10:28 SkyScan query 15:10:29 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 15:10:29 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 15:10:29 Check angles 15:10:29 SkyScan query 15:10:30 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 15:10:30 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 15:10:30 Check angles 15:10:30 SkyScan query 15:10:30 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 15:10:30 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 15:10:30 Check angles 15:10:30 SkyScan query 15:10:31 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:10:31 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:10:31 Check angles 15:10:31 SkyScan query 15:10:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:10:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:10:32 Message to Master queued w/err=0: serial=13116 error=0 15:10:37 Received message from Master: op=Filter serial=13117 15:10:37 Color wheel filter change from 0 to 0 15:10:37 FLIGetFilterPos err=0 currentPosition=0 15:10:37 FLIGetStepsRemaining err=0 RemainingSteps=0 15:10:37 Filter is already there-color wheel unchanged 15:10:37 Received message from Master: op=Shutter serial=13118 15:10:37 Shutter LASER close 15:10:37 Received message from Camera: op=State serial=13120 15:10:37 GetSingleValue result=40 Value=cccccccc 15:10:37 SkyScan query 15:10:38 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:10:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:38 Parameters OK 15:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:38 Set A/D data flow result=40 15:10:38 Set A/D channel type result=40 15:10:38 Set A/D encoding result=40 15:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:38 Set channel filter=0.000000e+000 result=40 15:10:38 Config A/D Result=40 15:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:38 Get A/D filter: -9.255963e+061 result=40 15:10:38 Get A/D value=-858993460 result=40 15:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:10:38 Parameters OK 15:10:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:10:38 Set A/D data flow result=40 15:10:38 Set A/D channel type result=40 15:10:38 Set A/D encoding result=40 15:10:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:10:38 Set channel filter=0.000000e+000 result=40 15:10:38 Config A/D Result=40 15:10:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:10:38 Get A/D filter: -9.255963e+061 result=40 15:10:38 Get A/D value=-858993460 result=40 15:10:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:10:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:10:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:10:38 Aux= 15:10:38 Message to Camera, serial 13120 queued 15:11:08 Received message from Master: op=PointingHead serial=13127 15:11:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:11:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:11:09 Point started: ret=0 15:11:09 point_skyscan result=0 15:11:10 Check angles 15:11:10 SkyScan query 15:11:10 SkyScan query done: ret=0 az=153.12<-10208 ze=8.865<-11409 Statuses=0009 0009 15:11:10 Msec=0 True Az=153.12 Ze=8.865 Az status=0009 Ze status=0009 15:11:10 Check angles 15:11:10 SkyScan query 15:11:11 SkyScan query done: ret=0 az=135.69<-9046 ze=-12.09<-12806 Statuses=0009 0009 15:11:11 Msec=750 True Az=135.69 Ze=-12.09 Az status=0009 Ze status=0009 15:11:11 Check angles 15:11:11 SkyScan query 15:11:12 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.045<-14203 Statuses=0009 0009 15:11:12 Msec=1500 True Az=118.125 Ze=-33.045 Az status=0009 Ze status=0009 15:11:12 Check angles 15:11:12 SkyScan query 15:11:12 SkyScan query done: ret=0 az=100.395<-6693 ze=-51.54<-15436 Statuses=0009 0009 15:11:12 Msec=2250 True Az=100.395 Ze=-51.54 Az status=0009 Ze status=0009 15:11:13 Check angles 15:11:13 SkyScan query 15:11:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:11:13 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:11:13 Check angles 15:11:13 SkyScan query 15:11:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:11:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:11:14 Message to Master queued w/err=0: serial=13127 error=0 15:11:19 Received message from Master: op=Filter serial=13128 15:11:19 Color wheel filter change from 0 to 0 15:11:19 FLIGetFilterPos err=0 currentPosition=0 15:11:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:11:19 Filter is already there-color wheel unchanged 15:11:19 Received message from Master: op=Shutter serial=13129 15:11:19 Shutter LASER close 15:11:19 Received message from Camera: op=State serial=13131 15:11:19 GetSingleValue result=40 Value=cccccccc 15:11:19 SkyScan query 15:11:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:11:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:20 Parameters OK 15:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:20 Set A/D data flow result=40 15:11:20 Set A/D channel type result=40 15:11:20 Set A/D encoding result=40 15:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:20 Set channel filter=0.000000e+000 result=40 15:11:20 Config A/D Result=40 15:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:20 Get A/D filter: -9.255963e+061 result=40 15:11:20 Get A/D value=-858993460 result=40 15:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:11:20 Parameters OK 15:11:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:11:20 Set A/D data flow result=40 15:11:20 Set A/D channel type result=40 15:11:20 Set A/D encoding result=40 15:11:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:11:20 Set channel filter=0.000000e+000 result=40 15:11:20 Config A/D Result=40 15:11:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:11:20 Get A/D filter: -9.255963e+061 result=40 15:11:20 Get A/D value=-858993460 result=40 15:11:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:11:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:11:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:11:20 Aux= 15:11:20 Message to Camera, serial 13131 queued 15:11:51 Received message from Master: op=PointingHead serial=13138 15:11:51 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:11:51 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:11:51 Point started: ret=0 15:11:51 point_skyscan result=0 15:11:52 Check angles 15:11:52 SkyScan query 15:11:52 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.495<-17433 Statuses=0009 0009 15:11:52 Msec=0 True Az=109.155 Ze=-81.495 Az status=0009 Ze status=0009 15:11:52 Check angles 15:11:52 SkyScan query 15:11:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.465<-18831 Statuses=0008 0009 15:11:53 Msec=750 True Az=112.995 Ze=-102.465 Az status=0008 Ze status=0009 15:11:53 Check angles 15:11:53 SkyScan query 15:11:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.39<-20226 Statuses=0008 0009 15:11:54 Msec=1500 True Az=112.995 Ze=-123.39 Az status=0008 Ze status=0009 15:11:54 Check angles 15:11:54 SkyScan query 15:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.345<-21623 Statuses=0008 0009 15:11:55 Msec=2250 True Az=112.995 Ze=-144.345 Az status=0008 Ze status=0009 15:11:55 Check angles 15:11:55 SkyScan query 15:11:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.315<-23021 Statuses=0008 0009 15:11:55 Msec=3000 True Az=112.995 Ze=-165.315 Az status=0008 Ze status=0009 15:11:55 Check angles 15:11:55 SkyScan query 15:11:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:11:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:11:56 Message to Master queued w/err=0: serial=13138 error=0 15:12:01 Received message from Master: op=Filter serial=13139 15:12:01 Color wheel filter change from 0 to 0 15:12:01 FLIGetFilterPos err=0 currentPosition=0 15:12:01 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:01 Filter is already there-color wheel unchanged 15:12:01 Received message from Master: op=Shutter serial=13140 15:12:01 Shutter LASER open 15:12:01 Received message from Camera: op=State serial=13142 15:12:01 GetSingleValue result=40 Value=cccccccc 15:12:01 SkyScan query 15:12:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:12:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:02 Parameters OK 15:12:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:02 Set A/D data flow result=40 15:12:02 Set A/D channel type result=40 15:12:02 Set A/D encoding result=40 15:12:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:02 Set channel filter=0.000000e+000 result=40 15:12:02 Config A/D Result=40 15:12:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:02 Get A/D filter: -9.255963e+061 result=40 15:12:02 Get A/D value=-858993460 result=40 15:12:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:02 Parameters OK 15:12:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:02 Set A/D data flow result=40 15:12:02 Set A/D channel type result=40 15:12:02 Set A/D encoding result=40 15:12:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:02 Set channel filter=0.000000e+000 result=40 15:12:02 Config A/D Result=40 15:12:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:02 Get A/D filter: -9.255963e+061 result=40 15:12:02 Get A/D value=-858993460 result=40 15:12:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:02 Aux= 15:12:02 Message to Camera, serial 13142 queued 15:12:04 Received message from Master: op=Shutter serial=13146 15:12:04 Shutter LASER close 15:12:05 Received message from Master: op=PointingHead serial=13150 15:12:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:12:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:12:05 Point started: ret=0 15:12:05 point_skyscan result=0 15:12:06 Check angles 15:12:06 SkyScan query 15:12:07 SkyScan query done: ret=0 az=89.685<-5979 ze=157.08<-1528 Statuses=0009 0009 15:12:07 Msec=0 True Az=89.685 Ze=157.08 Az status=0009 Ze status=0009 15:12:07 Check angles 15:12:07 SkyScan query 15:12:07 SkyScan query done: ret=0 az=72.3<-4820 ze=136.095<-2927 Statuses=0009 0009 15:12:07 Msec=750 True Az=72.3 Ze=136.095 Az status=0009 Ze status=0009 15:12:07 Check angles 15:12:07 SkyScan query 15:12:08 SkyScan query done: ret=0 az=54.825<-3655 ze=115.17<-4322 Statuses=0009 0009 15:12:08 Msec=1500 True Az=54.825 Ze=115.17 Az status=0009 Ze status=0009 15:12:08 Check angles 15:12:08 SkyScan query 15:12:09 SkyScan query done: ret=0 az=40.845<-2723 ze=94.17<-5722 Statuses=0009 0009 15:12:09 Msec=2250 True Az=40.845 Ze=94.17 Az status=0009 Ze status=0009 [UTC 2018-12-4 15:12:09] 15:12:09 Check angles 15:12:09 SkyScan query 15:12:10 SkyScan query done: ret=0 az=41.01<-2734 ze=73.23<-7118 Statuses=0008 0009 15:12:10 Msec=3000 True Az=41.01 Ze=73.23 Az status=0008 Ze status=0009 15:12:10 Check angles 15:12:10 SkyScan query 15:12:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.725<-8485 Statuses=0008 0009 15:12:10 Msec=3750 True Az=40.995 Ze=52.725 Az status=0008 Ze status=0009 15:12:10 Check angles 15:12:10 SkyScan query 15:12:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:12:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:12:11 Message to Master queued w/err=0: serial=13150 error=0 15:12:16 Received message from Master: op=Filter serial=13151 15:12:16 Color wheel filter change from 0 to 0 15:12:16 FLIGetFilterPos err=0 currentPosition=0 15:12:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:16 Filter is already there-color wheel unchanged 15:12:16 Received message from Master: op=Shutter serial=13152 15:12:16 Shutter LASER close 15:12:16 Received message from Camera: op=State serial=13154 15:12:16 GetSingleValue result=40 Value=cccccccc 15:12:16 SkyScan query 15:12:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:12:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:17 Parameters OK 15:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:17 Set A/D data flow result=40 15:12:17 Set A/D channel type result=40 15:12:17 Set A/D encoding result=40 15:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:17 Set channel filter=0.000000e+000 result=40 15:12:17 Config A/D Result=40 15:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:17 Get A/D filter: -9.255963e+061 result=40 15:12:17 Get A/D value=-858993460 result=40 15:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:12:17 Parameters OK 15:12:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:12:17 Set A/D data flow result=40 15:12:17 Set A/D channel type result=40 15:12:17 Set A/D encoding result=40 15:12:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:12:17 Set channel filter=0.000000e+000 result=40 15:12:17 Config A/D Result=40 15:12:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:12:17 Get A/D filter: -9.255963e+061 result=40 15:12:17 Get A/D value=-858993460 result=40 15:12:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:12:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:12:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:12:17 Aux= 15:12:17 Message to Camera, serial 13154 queued 15:12:48 Received message from Master: op=PointingHead serial=13161 15:12:48 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:12:48 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:12:48 Point started: ret=0 15:12:48 point_skyscan result=0 15:12:49 Check angles 15:12:49 SkyScan query 15:12:50 SkyScan query done: ret=0 az=64.395<-4293 ze=66.555<-7563 Statuses=0009 0008 15:12:50 Msec=0 True Az=64.395 Ze=66.555 Az status=0009 Ze status=0008 15:12:50 Check angles 15:12:50 SkyScan query 15:12:50 SkyScan query done: ret=0 az=82.365<-5491 ze=66.495<-7567 Statuses=0009 0008 15:12:50 Msec=750 True Az=82.365 Ze=66.495 Az status=0009 Ze status=0008 15:12:50 Check angles 15:12:50 SkyScan query 15:12:51 SkyScan query done: ret=0 az=99.795<-6653 ze=66.495<-7567 Statuses=0009 0008 15:12:51 Msec=1500 True Az=99.795 Ze=66.495 Az status=0009 Ze status=0008 15:12:51 Check angles 15:12:51 SkyScan query 15:12:52 SkyScan query done: ret=0 az=117.24<-7816 ze=66.495<-7567 Statuses=0009 0008 15:12:52 Msec=2250 True Az=117.24 Ze=66.495 Az status=0009 Ze status=0008 15:12:52 Check angles 15:12:52 SkyScan query 15:12:53 SkyScan query done: ret=0 az=134.715<-8981 ze=66.495<-7567 Statuses=0009 0008 15:12:53 Msec=3000 True Az=134.715 Ze=66.495 Az status=0009 Ze status=0008 15:12:53 Check angles 15:12:53 SkyScan query 15:12:53 SkyScan query done: ret=0 az=151.995<-10133 ze=66.495<-7567 Statuses=0009 0008 15:12:53 Msec=3750 True Az=151.995 Ze=66.495 Az status=0009 Ze status=0008 15:12:53 Check angles 15:12:53 SkyScan query 15:12:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:12:54 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:12:54 Message to Master queued w/err=0: serial=13161 error=0 15:12:59 Received message from Master: op=Filter serial=13162 15:12:59 Color wheel filter change from 0 to 0 15:12:59 FLIGetFilterPos err=0 currentPosition=0 15:12:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:12:59 Filter is already there-color wheel unchanged 15:12:59 Received message from Master: op=Shutter serial=13163 15:12:59 Shutter LASER close 15:12:59 Received message from Camera: op=State serial=13165 15:12:59 GetSingleValue result=40 Value=cccccccc 15:12:59 SkyScan query 15:13:00 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:13:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:00 Parameters OK 15:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:00 Set A/D data flow result=40 15:13:00 Set A/D channel type result=40 15:13:00 Set A/D encoding result=40 15:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:00 Set channel filter=0.000000e+000 result=40 15:13:00 Config A/D Result=40 15:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:00 Get A/D filter: -9.255963e+061 result=40 15:13:00 Get A/D value=-858993460 result=40 15:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:00 Parameters OK 15:13:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:00 Set A/D data flow result=40 15:13:00 Set A/D channel type result=40 15:13:00 Set A/D encoding result=40 15:13:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:00 Set channel filter=0.000000e+000 result=40 15:13:00 Config A/D Result=40 15:13:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:00 Get A/D filter: -9.255963e+061 result=40 15:13:00 Get A/D value=-858993460 result=40 15:13:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:00 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:00 Aux= 15:13:00 Message to Camera, serial 13165 queued 15:13:31 Received message from Master: op=PointingHead serial=13172 15:13:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:13:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:13:31 Point started: ret=0 15:13:31 point_skyscan result=0 15:13:32 Check angles 15:13:32 SkyScan query 15:13:32 SkyScan query done: ret=0 az=134.835<-8989 ze=36.495<-9567 Statuses=0009 0009 15:13:32 Msec=0 True Az=134.835 Ze=36.495 Az status=0009 Ze status=0009 15:13:33 Check angles 15:13:33 SkyScan query 15:13:33 SkyScan query done: ret=0 az=117.3<-7820 ze=15.57<-10962 Statuses=0009 0009 15:13:33 Msec=750 True Az=117.3 Ze=15.57 Az status=0009 Ze status=0009 15:13:33 Check angles 15:13:33 SkyScan query 15:13:34 SkyScan query done: ret=0 az=99.975<-6665 ze=-5.415<-12361 Statuses=0009 0009 15:13:34 Msec=1500 True Az=99.975 Ze=-5.415 Az status=0009 Ze status=0009 15:13:34 Check angles 15:13:34 SkyScan query 15:13:35 SkyScan query done: ret=0 az=82.08<-5472 ze=-26.76<-13784 Statuses=0009 0009 15:13:35 Msec=2250 True Az=82.08 Ze=-26.76 Az status=0009 Ze status=0009 15:13:35 Check angles 15:13:35 SkyScan query 15:13:35 SkyScan query done: ret=0 az=64.635<-4309 ze=-38.565<-14571 Statuses=0009 0008 15:13:35 Msec=3000 True Az=64.635 Ze=-38.565 Az status=0009 Ze status=0008 15:13:36 Check angles 15:13:36 SkyScan query 15:13:36 SkyScan query done: ret=0 az=47.175<-3145 ze=-38.535<-14569 Statuses=0009 0008 15:13:36 Msec=3750 True Az=47.175 Ze=-38.535 Az status=0009 Ze status=0008 15:13:36 Check angles 15:13:36 SkyScan query 15:13:37 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 15:13:37 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 15:13:37 Message to Master queued w/err=0: serial=13172 error=0 15:13:42 Received message from Master: op=Filter serial=13173 15:13:42 Color wheel filter change from 0 to 0 15:13:42 FLIGetFilterPos err=0 currentPosition=0 15:13:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:13:42 Filter is already there-color wheel unchanged 15:13:42 Received message from Master: op=Shutter serial=13174 15:13:42 Shutter LASER close 15:13:42 Received message from Camera: op=State serial=13176 15:13:42 GetSingleValue result=40 Value=cccccccc 15:13:42 SkyScan query 15:13:43 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:13:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:43 Parameters OK 15:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:43 Set A/D data flow result=40 15:13:43 Set A/D channel type result=40 15:13:43 Set A/D encoding result=40 15:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:43 Set channel filter=0.000000e+000 result=40 15:13:43 Config A/D Result=40 15:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:43 Get A/D filter: -9.255963e+061 result=40 15:13:43 Get A/D value=-858993460 result=40 15:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:13:43 Parameters OK 15:13:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:13:43 Set A/D data flow result=40 15:13:43 Set A/D channel type result=40 15:13:43 Set A/D encoding result=40 15:13:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:13:43 Set channel filter=0.000000e+000 result=40 15:13:43 Config A/D Result=40 15:13:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:13:43 Get A/D filter: -9.255963e+061 result=40 15:13:43 Get A/D value=-858993460 result=40 15:13:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:13:43 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:13:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:13:43 Aux= 15:13:43 Message to Camera, serial 13176 queued 15:14:14 Received message from Master: op=PointingHead serial=13183 15:14:14 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:14:14 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:14:14 Point started: ret=0 15:14:14 point_skyscan result=0 15:14:15 Check angles 15:14:15 SkyScan query 15:14:15 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.265<-16551 Statuses=0009 0009 15:14:15 Msec=0 True Az=63.855 Ze=-68.265 Az status=0009 Ze status=0009 15:14:15 Check angles 15:14:15 SkyScan query 15:14:16 SkyScan query done: ret=0 az=81.51<-5434 ze=-89.22<-17948 Statuses=0009 0009 15:14:16 Msec=750 True Az=81.51 Ze=-89.22 Az status=0009 Ze status=0009 15:14:16 Check angles 15:14:16 SkyScan query 15:14:17 SkyScan query done: ret=0 az=99.39<-6626 ze=-110.595<-19373 Statuses=0009 0009 15:14:17 Msec=1500 True Az=99.39 Ze=-110.595 Az status=0009 Ze status=0009 15:14:17 Check angles 15:14:17 SkyScan query 15:14:18 SkyScan query done: ret=0 az=116.79<-7786 ze=-131.535<-20769 Statuses=0009 0009 15:14:18 Msec=2250 True Az=116.79 Ze=-131.535 Az status=0009 Ze status=0009 15:14:18 Check angles 15:14:18 SkyScan query 15:14:18 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 15:14:18 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 15:14:18 Check angles 15:14:18 SkyScan query 15:14:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:14:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:14:19 Message to Master queued w/err=0: serial=13183 error=0 15:14:24 Received message from Master: op=Filter serial=13184 15:14:24 Color wheel filter change from 0 to 0 15:14:24 FLIGetFilterPos err=0 currentPosition=0 15:14:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:14:24 Filter is already there-color wheel unchanged 15:14:24 Received message from Master: op=Shutter serial=13185 15:14:24 Shutter LASER close 15:14:24 Received message from Camera: op=State serial=13187 15:14:24 GetSingleValue result=40 Value=cccccccc 15:14:24 SkyScan query 15:14:25 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:14:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:25 Parameters OK 15:14:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:25 Set A/D data flow result=40 15:14:25 Set A/D channel type result=40 15:14:25 Set A/D encoding result=40 15:14:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:25 Set channel filter=0.000000e+000 result=40 15:14:25 Config A/D Result=40 15:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:25 Get A/D filter: -9.255963e+061 result=40 15:14:25 Get A/D value=-858993460 result=40 15:14:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:14:25 Parameters OK 15:14:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:14:25 Set A/D data flow result=40 15:14:25 Set A/D channel type result=40 15:14:25 Set A/D encoding result=40 15:14:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:14:25 Set channel filter=0.000000e+000 result=40 15:14:25 Config A/D Result=40 15:14:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:14:25 Get A/D filter: -9.255963e+061 result=40 15:14:25 Get A/D value=-858993460 result=40 15:14:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:14:25 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:14:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:14:25 Aux= 15:14:25 Message to Camera, serial 13187 queued 15:14:56 Received message from Master: op=PointingHead serial=13194 15:14:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:14:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:14:56 Point started: ret=0 15:14:56 point_skyscan result=0 15:14:57 Check angles 15:14:57 SkyScan query 15:14:57 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 15:14:57 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 15:14:58 Check angles 15:14:58 SkyScan query 15:14:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:14:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:14:58 Message to Master queued w/err=0: serial=13194 error=0 15:15:03 Received message from Master: op=Filter serial=13195 15:15:03 Color wheel filter change from 0 to 0 15:15:03 FLIGetFilterPos err=0 currentPosition=0 15:15:03 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:03 Filter is already there-color wheel unchanged 15:15:03 Received message from Master: op=Shutter serial=13196 15:15:03 Shutter LASER open 15:15:03 Received message from Camera: op=State serial=13198 15:15:03 GetSingleValue result=40 Value=cccccccc 15:15:03 SkyScan query 15:15:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:15:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:04 Parameters OK 15:15:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:04 Set A/D data flow result=40 15:15:04 Set A/D channel type result=40 15:15:04 Set A/D encoding result=40 15:15:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:04 Set channel filter=0.000000e+000 result=40 15:15:04 Config A/D Result=40 15:15:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:04 Get A/D filter: -9.255963e+061 result=40 15:15:04 Get A/D value=-858993460 result=40 15:15:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:04 Parameters OK 15:15:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:04 Set A/D data flow result=40 15:15:04 Set A/D channel type result=40 15:15:04 Set A/D encoding result=40 15:15:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:04 Set channel filter=0.000000e+000 result=40 15:15:04 Config A/D Result=40 15:15:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:04 Get A/D filter: -9.255963e+061 result=40 15:15:04 Get A/D value=-858993460 result=40 15:15:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:04 Aux= 15:15:04 Message to Camera, serial 13198 queued 15:15:06 Received message from Master: op=Shutter serial=13202 15:15:06 Shutter LASER close 15:15:07 Received message from Master: op=PointingHead serial=13206 15:15:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:15:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:15:07 Point started: ret=0 15:15:07 point_skyscan result=0 15:15:08 Check angles 15:15:08 SkyScan query 15:15:09 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.535<-21569 Statuses=0009 0009 15:15:09 Msec=0 True Az=135.735 Ze=-143.535 Az status=0009 Ze status=0009 15:15:09 Check angles 15:15:09 SkyScan query 15:15:10 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.145<-20143 Statuses=0009 0009 15:15:10 Msec=750 True Az=153.585 Ze=-122.145 Az status=0009 Ze status=0009 15:15:10 Check angles 15:15:10 SkyScan query 15:15:10 SkyScan query done: ret=0 az=171.405<-11427 ze=-100.77<-18718 Statuses=0009 0009 15:15:10 Msec=1500 True Az=171.405 Ze=-100.77 Az status=0009 Ze status=0009 15:15:10 Check angles 15:15:10 SkyScan query 15:15:11 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.815<-17321 Statuses=0008 0009 15:15:11 Msec=2250 True Az=176.025 Ze=-79.815 Az status=0008 Ze status=0009 15:15:11 Check angles 15:15:11 SkyScan query 15:15:12 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.875<-15925 Statuses=0008 0009 15:15:12 Msec=3000 True Az=176.01 Ze=-58.875 Az status=0008 Ze status=0009 15:15:12 Check angles 15:15:12 SkyScan query 15:15:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:15:13 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:15:13 Message to Master queued w/err=0: serial=13206 error=0 15:15:18 Received message from Master: op=Filter serial=13207 15:15:18 Color wheel filter change from 0 to 0 15:15:18 FLIGetFilterPos err=0 currentPosition=0 15:15:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:15:18 Filter is already there-color wheel unchanged 15:15:18 Received message from Master: op=Shutter serial=13208 15:15:18 Shutter LASER close 15:15:18 Received message from Camera: op=State serial=13210 15:15:18 GetSingleValue result=40 Value=cccccccc 15:15:18 SkyScan query 15:15:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:15:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:18 Parameters OK 15:15:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:18 Set A/D data flow result=40 15:15:18 Set A/D channel type result=40 15:15:18 Set A/D encoding result=40 15:15:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:18 Set channel filter=0.000000e+000 result=40 15:15:18 Config A/D Result=40 15:15:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:18 Get A/D filter: -9.255963e+061 result=40 15:15:18 Get A/D value=-858993460 result=40 15:15:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:15:18 Parameters OK 15:15:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:15:18 Set A/D data flow result=40 15:15:18 Set A/D channel type result=40 15:15:18 Set A/D encoding result=40 15:15:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:15:18 Set channel filter=0.000000e+000 result=40 15:15:18 Config A/D Result=40 15:15:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:15:18 Get A/D filter: -9.255963e+061 result=40 15:15:18 Get A/D value=-858993460 result=40 15:15:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:15:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:15:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:15:18 Aux= 15:15:18 Message to Camera, serial 13210 queued 15:15:49 Received message from Master: op=PointingHead serial=13217 15:15:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:15:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:15:50 Point started: ret=0 15:15:50 point_skyscan result=0 15:15:50 Check angles 15:15:50 SkyScan query 15:15:51 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.87<-13458 Statuses=0009 0009 15:15:51 Msec=0 True Az=153.18 Ze=-21.87 Az status=0009 Ze status=0009 15:15:51 Check angles 15:15:51 SkyScan query 15:15:52 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.915<-12061 Statuses=0009 0009 15:15:52 Msec=750 True Az=135.735 Ze=-0.915 Az status=0009 Ze status=0009 15:15:52 Check angles 15:15:52 SkyScan query 15:15:52 SkyScan query done: ret=0 az=118.17<-7878 ze=20.07<-10662 Statuses=0009 0009 15:15:52 Msec=1500 True Az=118.17 Ze=20.07 Az status=0009 Ze status=0009 15:15:53 Check angles 15:15:53 SkyScan query 15:15:53 SkyScan query done: ret=0 az=100.755<-6717 ze=40.995<-9267 Statuses=0009 0009 15:15:53 Msec=2250 True Az=100.755 Ze=40.995 Az status=0009 Ze status=0009 15:15:53 Check angles 15:15:53 SkyScan query 15:15:54 SkyScan query done: ret=0 az=86.01<-5734 ze=51.54<-8564 Statuses=0009 0008 15:15:54 Msec=3000 True Az=86.01 Ze=51.54 Az status=0009 Ze status=0008 15:15:54 Check angles 15:15:54 SkyScan query 15:15:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:15:55 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:15:55 Message to Master queued w/err=0: serial=13217 error=0 15:16:00 Received message from Master: op=Filter serial=13218 15:16:00 Color wheel filter change from 0 to 0 15:16:00 FLIGetFilterPos err=0 currentPosition=0 15:16:00 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:00 Filter is already there-color wheel unchanged 15:16:00 Received message from Master: op=Shutter serial=13219 15:16:00 Shutter LASER close 15:16:00 Received message from Camera: op=State serial=13221 15:16:00 GetSingleValue result=40 Value=cccccccc 15:16:00 SkyScan query 15:16:01 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:16:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:01 Parameters OK 15:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:01 Set A/D data flow result=40 15:16:01 Set A/D channel type result=40 15:16:01 Set A/D encoding result=40 15:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:01 Set channel filter=0.000000e+000 result=40 15:16:01 Config A/D Result=40 15:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:01 Get A/D filter: -9.255963e+061 result=40 15:16:01 Get A/D value=-858993460 result=40 15:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:01 Parameters OK 15:16:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:01 Set A/D data flow result=40 15:16:01 Set A/D channel type result=40 15:16:01 Set A/D encoding result=40 15:16:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:01 Set channel filter=0.000000e+000 result=40 15:16:01 Config A/D Result=40 15:16:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:01 Get A/D filter: -9.255963e+061 result=40 15:16:01 Get A/D value=-858993460 result=40 15:16:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:01 Aux= 15:16:01 Message to Camera, serial 13221 queued 15:16:31 Received message from Master: op=PointingHead serial=13228 15:16:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:16:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:16:32 Point started: ret=0 15:16:32 point_skyscan result=0 15:16:33 Check angles 15:16:33 SkyScan query 15:16:33 SkyScan query done: ret=0 az=109.365<-7291 ze=38.49<-9434 Statuses=0009 0008 15:16:33 Msec=0 True Az=109.365 Ze=38.49 Az status=0009 Ze status=0008 15:16:33 Check angles 15:16:33 SkyScan query 15:16:34 SkyScan query done: ret=0 az=126.795<-8453 ze=38.505<-9433 Statuses=0009 0008 15:16:34 Msec=750 True Az=126.795 Ze=38.505 Az status=0009 Ze status=0008 15:16:34 Check angles 15:16:34 SkyScan query 15:16:35 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 15:16:35 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 15:16:35 Check angles 15:16:35 SkyScan query 15:16:35 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 15:16:35 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 15:16:36 Check angles 15:16:36 SkyScan query 15:16:36 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:16:36 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:16:36 Check angles 15:16:36 SkyScan query 15:16:37 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:16:37 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:16:37 Message to Master queued w/err=0: serial=13228 error=0 15:16:42 Received message from Master: op=Filter serial=13229 15:16:42 Color wheel filter change from 0 to 0 15:16:42 FLIGetFilterPos err=0 currentPosition=0 15:16:42 FLIGetStepsRemaining err=0 RemainingSteps=0 15:16:42 Filter is already there-color wheel unchanged 15:16:42 Received message from Master: op=Shutter serial=13230 15:16:42 Shutter LASER close 15:16:42 Received message from Camera: op=State serial=13232 15:16:42 GetSingleValue result=40 Value=cccccccc 15:16:42 SkyScan query 15:16:43 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:16:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:43 Parameters OK 15:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:43 Set A/D data flow result=40 15:16:43 Set A/D channel type result=40 15:16:43 Set A/D encoding result=40 15:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:43 Set channel filter=0.000000e+000 result=40 15:16:43 Config A/D Result=40 15:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:43 Get A/D filter: -9.255963e+061 result=40 15:16:43 Get A/D value=-858993460 result=40 15:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:16:43 Parameters OK 15:16:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:16:43 Set A/D data flow result=40 15:16:43 Set A/D channel type result=40 15:16:43 Set A/D encoding result=40 15:16:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:16:43 Set channel filter=0.000000e+000 result=40 15:16:43 Config A/D Result=40 15:16:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:16:43 Get A/D filter: -9.255963e+061 result=40 15:16:43 Get A/D value=-858993460 result=40 15:16:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:16:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:16:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:16:43 Aux= 15:16:43 Message to Camera, serial 13232 queued 15:17:14 Received message from Master: op=PointingHead serial=13239 15:17:14 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:17:14 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:17:14 Point started: ret=0 15:17:14 point_skyscan result=0 15:17:15 Check angles 15:17:15 SkyScan query 15:17:15 SkyScan query done: ret=0 az=153.105<-10207 ze=8.76<-11416 Statuses=0009 0009 15:17:15 Msec=0 True Az=153.105 Ze=8.76 Az status=0009 Ze status=0009 15:17:15 Check angles 15:17:15 SkyScan query 15:17:16 SkyScan query done: ret=0 az=135.285<-9019 ze=-12.615<-12841 Statuses=0009 0009 15:17:16 Msec=750 True Az=135.285 Ze=-12.615 Az status=0009 Ze status=0009 15:17:16 Check angles 15:17:16 SkyScan query 15:17:17 SkyScan query done: ret=0 az=117.375<-7825 ze=-33.96<-14264 Statuses=0009 0009 15:17:17 Msec=1500 True Az=117.375 Ze=-33.96 Az status=0009 Ze status=0009 15:17:17 Check angles 15:17:17 SkyScan query 15:17:18 SkyScan query done: ret=0 az=100.005<-6667 ze=-51.555<-15437 Statuses=0009 0009 15:17:18 Msec=2250 True Az=100.005 Ze=-51.555 Az status=0009 Ze status=0009 15:17:18 Check angles 15:17:18 SkyScan query 15:17:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:17:18 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:17:18 Check angles 15:17:18 SkyScan query 15:17:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:17:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:17:19 Message to Master queued w/err=0: serial=13239 error=0 15:17:24 Received message from Master: op=Filter serial=13240 15:17:24 Color wheel filter change from 0 to 0 15:17:24 FLIGetFilterPos err=0 currentPosition=0 15:17:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:17:24 Filter is already there-color wheel unchanged 15:17:24 Received message from Master: op=Shutter serial=13241 15:17:24 Shutter LASER close 15:17:24 Received message from Camera: op=State serial=13243 15:17:24 GetSingleValue result=40 Value=cccccccc 15:17:24 SkyScan query 15:17:25 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:17:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:25 Parameters OK 15:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:25 Set A/D data flow result=40 15:17:25 Set A/D channel type result=40 15:17:25 Set A/D encoding result=40 15:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:25 Set channel filter=0.000000e+000 result=40 15:17:25 Config A/D Result=40 15:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:25 Get A/D filter: -9.255963e+061 result=40 15:17:25 Get A/D value=-858993460 result=40 15:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:17:25 Parameters OK 15:17:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:17:25 Set A/D data flow result=40 15:17:25 Set A/D channel type result=40 15:17:25 Set A/D encoding result=40 15:17:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:17:25 Set channel filter=0.000000e+000 result=40 15:17:25 Config A/D Result=40 15:17:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:17:25 Get A/D filter: -9.255963e+061 result=40 15:17:25 Get A/D value=-858993460 result=40 15:17:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:17:25 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:17:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:17:25 Aux= 15:17:25 Message to Camera, serial 13243 queued 15:17:56 Received message from Master: op=PointingHead serial=13250 15:17:56 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:17:56 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:17:56 Point started: ret=0 15:17:56 point_skyscan result=0 15:17:57 Check angles 15:17:57 SkyScan query 15:17:57 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.48<-17432 Statuses=0009 0009 15:17:57 Msec=0 True Az=109.155 Ze=-81.48 Az status=0009 Ze status=0009 15:17:58 Check angles 15:17:58 SkyScan query 15:17:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.795<-18853 Statuses=0008 0009 15:17:58 Msec=750 True Az=112.995 Ze=-102.795 Az status=0008 Ze status=0009 15:17:58 Check angles 15:17:58 SkyScan query 15:17:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 15:17:59 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 15:17:59 Check angles 15:17:59 SkyScan query 15:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 15:18:00 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 15:18:00 Check angles 15:18:00 SkyScan query 15:18:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.065<-23071 Statuses=0008 0009 15:18:00 Msec=3000 True Az=112.995 Ze=-166.065 Az status=0008 Ze status=0009 15:18:01 Check angles 15:18:01 SkyScan query 15:18:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:18:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:18:01 Message to Master queued w/err=0: serial=13250 error=0 15:18:06 Received message from Master: op=Filter serial=13251 15:18:06 Color wheel filter change from 0 to 0 15:18:06 FLIGetFilterPos err=0 currentPosition=0 15:18:06 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:06 Filter is already there-color wheel unchanged 15:18:06 Received message from Master: op=Shutter serial=13252 15:18:06 Shutter LASER open 15:18:07 Received message from Camera: op=State serial=13254 15:18:07 GetSingleValue result=40 Value=cccccccc 15:18:07 SkyScan query 15:18:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:18:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:07 Parameters OK 15:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:07 Set A/D data flow result=40 15:18:07 Set A/D channel type result=40 15:18:07 Set A/D encoding result=40 15:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:07 Set channel filter=0.000000e+000 result=40 15:18:07 Config A/D Result=40 15:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:07 Get A/D filter: -9.255963e+061 result=40 15:18:07 Get A/D value=-858993460 result=40 15:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:07 Parameters OK 15:18:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:07 Set A/D data flow result=40 15:18:07 Set A/D channel type result=40 15:18:07 Set A/D encoding result=40 15:18:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:07 Set channel filter=0.000000e+000 result=40 15:18:07 Config A/D Result=40 15:18:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:07 Get A/D filter: -9.255963e+061 result=40 15:18:07 Get A/D value=-858993460 result=40 15:18:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:07 Aux= 15:18:07 Message to Camera, serial 13254 queued 15:18:10 Received message from Master: op=Shutter serial=13258 15:18:10 Shutter LASER close 15:18:10 Received message from Master: op=PointingHead serial=13262 15:18:10 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:18:10 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:18:10 Point started: ret=0 15:18:10 point_skyscan result=0 15:18:11 Check angles 15:18:11 SkyScan query 15:18:12 SkyScan query done: ret=0 az=90.06<-6004 ze=157.455<-1503 Statuses=0009 0009 15:18:12 Msec=0 True Az=90.06 Ze=157.455 Az status=0009 Ze status=0009 15:18:12 Check angles 15:18:12 SkyScan query 15:18:12 SkyScan query done: ret=0 az=72.105<-4807 ze=136.05<-2930 Statuses=0009 0009 15:18:12 Msec=750 True Az=72.105 Ze=136.05 Az status=0009 Ze status=0009 15:18:13 Check angles 15:18:13 SkyScan query 15:18:13 SkyScan query done: ret=0 az=54.84<-3656 ze=115.14<-4324 Statuses=0009 0009 15:18:13 Msec=1500 True Az=54.84 Ze=115.14 Az status=0009 Ze status=0009 15:18:13 Check angles 15:18:13 SkyScan query 15:18:14 SkyScan query done: ret=0 az=40.845<-2723 ze=94.125<-5725 Statuses=0009 0009 15:18:14 Msec=2250 True Az=40.845 Ze=94.125 Az status=0009 Ze status=0009 15:18:14 Check angles 15:18:14 SkyScan query 15:18:15 SkyScan query done: ret=0 az=41.01<-2734 ze=72.765<-7149 Statuses=0008 0009 15:18:15 Msec=3000 True Az=41.01 Ze=72.765 Az status=0008 Ze status=0009 15:18:15 Check angles 15:18:15 SkyScan query 15:18:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 15:18:15 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 15:18:16 Check angles 15:18:16 SkyScan query 15:18:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:18:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:18:16 Message to Master queued w/err=0: serial=13262 error=0 15:18:21 Received message from Master: op=Filter serial=13263 15:18:21 Color wheel filter change from 0 to 0 15:18:21 FLIGetFilterPos err=0 currentPosition=0 15:18:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:18:21 Filter is already there-color wheel unchanged 15:18:21 Received message from Master: op=Shutter serial=13264 15:18:21 Shutter LASER close 15:18:22 Received message from Camera: op=State serial=13266 15:18:22 GetSingleValue result=40 Value=cccccccc 15:18:22 SkyScan query 15:18:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:18:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:22 Parameters OK 15:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:22 Set A/D data flow result=40 15:18:22 Set A/D channel type result=40 15:18:22 Set A/D encoding result=40 15:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:22 Set channel filter=0.000000e+000 result=40 15:18:22 Config A/D Result=40 15:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:22 Get A/D filter: -9.255963e+061 result=40 15:18:22 Get A/D value=-858993460 result=40 15:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:18:22 Parameters OK 15:18:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:18:22 Set A/D data flow result=40 15:18:22 Set A/D channel type result=40 15:18:22 Set A/D encoding result=40 15:18:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:18:22 Set channel filter=0.000000e+000 result=40 15:18:22 Config A/D Result=40 15:18:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:18:22 Get A/D filter: -9.255963e+061 result=40 15:18:22 Get A/D value=-858993460 result=40 15:18:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:18:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:18:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:18:22 Aux= 15:18:22 Message to Camera, serial 13266 queued 15:18:53 Received message from Master: op=PointingHead serial=13273 15:18:53 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:18:53 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:18:53 Point started: ret=0 15:18:53 point_skyscan result=0 15:18:54 Check angles 15:18:54 SkyScan query 15:18:55 SkyScan query done: ret=0 az=64.125<-4275 ze=66.555<-7563 Statuses=0009 0008 15:18:55 Msec=0 True Az=64.125 Ze=66.555 Az status=0009 Ze status=0008 15:18:55 Check angles 15:18:55 SkyScan query 15:18:55 SkyScan query done: ret=0 az=81.6<-5440 ze=66.495<-7567 Statuses=0009 0008 15:18:55 Msec=750 True Az=81.6 Ze=66.495 Az status=0009 Ze status=0008 15:18:56 Check angles 15:18:56 SkyScan query 15:18:56 SkyScan query done: ret=0 az=99.21<-6614 ze=66.495<-7567 Statuses=0009 0008 15:18:56 Msec=1500 True Az=99.21 Ze=66.495 Az status=0009 Ze status=0008 15:18:56 Check angles 15:18:56 SkyScan query 15:18:57 SkyScan query done: ret=0 az=116.895<-7793 ze=66.495<-7567 Statuses=0009 0008 15:18:57 Msec=2250 True Az=116.895 Ze=66.495 Az status=0009 Ze status=0008 15:18:57 Check angles 15:18:57 SkyScan query 15:18:58 SkyScan query done: ret=0 az=134.415<-8961 ze=66.495<-7567 Statuses=0009 0008 15:18:58 Msec=3000 True Az=134.415 Ze=66.495 Az status=0009 Ze status=0008 15:18:58 Check angles 15:18:58 SkyScan query 15:18:58 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 15:18:58 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 15:18:59 Check angles 15:18:59 SkyScan query 15:18:59 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:18:59 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:18:59 Message to Master queued w/err=0: serial=13273 error=0 15:19:04 Received message from Master: op=Filter serial=13274 15:19:04 Color wheel filter change from 0 to 0 15:19:04 FLIGetFilterPos err=0 currentPosition=0 15:19:04 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:04 Filter is already there-color wheel unchanged 15:19:04 Received message from Master: op=Shutter serial=13275 15:19:04 Shutter LASER close 15:19:04 Received message from Camera: op=State serial=13277 15:19:04 GetSingleValue result=40 Value=cccccccc 15:19:04 SkyScan query 15:19:05 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:19:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:05 Parameters OK 15:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:05 Set A/D data flow result=40 15:19:05 Set A/D channel type result=40 15:19:05 Set A/D encoding result=40 15:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:05 Set channel filter=0.000000e+000 result=40 15:19:05 Config A/D Result=40 15:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:05 Get A/D filter: -9.255963e+061 result=40 15:19:05 Get A/D value=-858993460 result=40 15:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:05 Parameters OK 15:19:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:05 Set A/D data flow result=40 15:19:05 Set A/D channel type result=40 15:19:05 Set A/D encoding result=40 15:19:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:05 Set channel filter=0.000000e+000 result=40 15:19:05 Config A/D Result=40 15:19:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:05 Get A/D filter: -9.255963e+061 result=40 15:19:05 Get A/D value=-858993460 result=40 15:19:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:05 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:05 Aux= 15:19:05 Message to Camera, serial 13277 queued 15:19:36 Received message from Master: op=PointingHead serial=13284 15:19:36 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:19:36 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:19:36 Point started: ret=0 15:19:36 point_skyscan result=0 15:19:37 Check angles 15:19:37 SkyScan query 15:19:37 SkyScan query done: ret=0 az=135.21<-9014 ze=36.93<-9538 Statuses=0009 0009 15:19:37 Msec=0 True Az=135.21 Ze=36.93 Az status=0009 Ze status=0009 15:19:38 Check angles 15:19:38 SkyScan query 15:19:38 SkyScan query done: ret=0 az=117.66<-7844 ze=15.945<-10937 Statuses=0009 0009 15:19:38 Msec=750 True Az=117.66 Ze=15.945 Az status=0009 Ze status=0009 15:19:38 Check angles 15:19:38 SkyScan query 15:19:39 SkyScan query done: ret=0 az=100.29<-6686 ze=-5.01<-12334 Statuses=0009 0009 15:19:39 Msec=1500 True Az=100.29 Ze=-5.01 Az status=0009 Ze status=0009 15:19:39 Check angles 15:19:39 SkyScan query 15:19:40 SkyScan query done: ret=0 az=82.815<-5521 ze=-25.98<-13732 Statuses=0009 0009 15:19:40 Msec=2250 True Az=82.815 Ze=-25.98 Az status=0009 Ze status=0009 15:19:40 Check angles 15:19:40 SkyScan query 15:19:40 SkyScan query done: ret=0 az=65.31<-4354 ze=-38.565<-14571 Statuses=0009 0008 15:19:40 Msec=3000 True Az=65.31 Ze=-38.565 Az status=0009 Ze status=0008 15:19:41 Check angles 15:19:41 SkyScan query 15:19:41 SkyScan query done: ret=0 az=47.88<-3192 ze=-38.535<-14569 Statuses=0009 0008 15:19:41 Msec=3750 True Az=47.88 Ze=-38.535 Az status=0009 Ze status=0008 15:19:41 Check angles 15:19:41 SkyScan query 15:19:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:19:42 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:19:42 Message to Master queued w/err=0: serial=13284 error=0 15:19:47 Received message from Master: op=Filter serial=13285 15:19:47 Color wheel filter change from 0 to 0 15:19:47 FLIGetFilterPos err=0 currentPosition=0 15:19:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:19:47 Filter is already there-color wheel unchanged 15:19:47 Received message from Master: op=Shutter serial=13286 15:19:47 Shutter LASER close 15:19:47 Received message from Camera: op=State serial=13288 15:19:47 GetSingleValue result=40 Value=cccccccc 15:19:47 SkyScan query 15:19:48 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:19:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:48 Parameters OK 15:19:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:48 Set A/D data flow result=40 15:19:48 Set A/D channel type result=40 15:19:48 Set A/D encoding result=40 15:19:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:48 Set channel filter=0.000000e+000 result=40 15:19:48 Config A/D Result=40 15:19:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:48 Get A/D filter: -9.255963e+061 result=40 15:19:48 Get A/D value=-858993460 result=40 15:19:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:19:48 Parameters OK 15:19:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:19:48 Set A/D data flow result=40 15:19:48 Set A/D channel type result=40 15:19:48 Set A/D encoding result=40 15:19:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:19:48 Set channel filter=0.000000e+000 result=40 15:19:48 Config A/D Result=40 15:19:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:19:48 Get A/D filter: -9.255963e+061 result=40 15:19:48 Get A/D value=-858993460 result=40 15:19:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:19:48 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:19:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:19:48 Aux= 15:19:48 Message to Camera, serial 13288 queued 15:20:19 Received message from Master: op=PointingHead serial=13295 15:20:19 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:20:19 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:20:19 Point started: ret=0 15:20:19 point_skyscan result=0 15:20:20 Check angles 15:20:20 SkyScan query 15:20:20 SkyScan query done: ret=0 az=64.17<-4278 ze=-68.475<-16565 Statuses=0009 0009 15:20:20 Msec=0 True Az=64.17 Ze=-68.475 Az status=0009 Ze status=0009 15:20:20 Check angles 15:20:20 SkyScan query 15:20:21 SkyScan query done: ret=0 az=81.69<-5446 ze=-89.43<-17962 Statuses=0009 0009 15:20:21 Msec=750 True Az=81.69 Ze=-89.43 Az status=0009 Ze status=0009 15:20:21 Check angles 15:20:21 SkyScan query 15:20:22 SkyScan query done: ret=0 az=99.15<-6610 ze=-110.385<-19359 Statuses=0009 0009 15:20:22 Msec=1500 True Az=99.15 Ze=-110.385 Az status=0009 Ze status=0009 15:20:22 Check angles 15:20:22 SkyScan query 15:20:23 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.325<-20755 Statuses=0009 0009 15:20:23 Msec=2250 True Az=116.76 Ze=-131.325 Az status=0009 Ze status=0009 15:20:23 Check angles 15:20:23 SkyScan query 15:20:23 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 15:20:23 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 15:20:23 Check angles 15:20:23 SkyScan query 15:20:24 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:20:24 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:20:24 Message to Master queued w/err=0: serial=13295 error=0 15:20:29 Received message from Master: op=Filter serial=13296 15:20:29 Color wheel filter change from 0 to 0 15:20:29 FLIGetFilterPos err=0 currentPosition=0 15:20:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:20:29 Filter is already there-color wheel unchanged 15:20:29 Received message from Master: op=Shutter serial=13297 15:20:29 Shutter LASER close 15:20:29 Received message from Camera: op=State serial=13299 15:20:29 GetSingleValue result=40 Value=cccccccc 15:20:29 SkyScan query 15:20:30 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:20:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:30 Parameters OK 15:20:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:30 Set A/D data flow result=40 15:20:30 Set A/D channel type result=40 15:20:30 Set A/D encoding result=40 15:20:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:30 Set channel filter=0.000000e+000 result=40 15:20:30 Config A/D Result=40 15:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:30 Get A/D filter: -9.255963e+061 result=40 15:20:30 Get A/D value=-858993460 result=40 15:20:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:20:30 Parameters OK 15:20:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:20:30 Set A/D data flow result=40 15:20:30 Set A/D channel type result=40 15:20:30 Set A/D encoding result=40 15:20:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:20:30 Set channel filter=0.000000e+000 result=40 15:20:30 Config A/D Result=40 15:20:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:20:30 Get A/D filter: -9.255963e+061 result=40 15:20:30 Get A/D value=-858993460 result=40 15:20:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:20:30 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:20:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:20:30 Aux= 15:20:30 Message to Camera, serial 13299 queued 15:21:01 Received message from Master: op=PointingHead serial=13306 15:21:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:21:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:21:01 Point started: ret=0 15:21:01 point_skyscan result=0 15:21:02 Check angles 15:21:02 SkyScan query 15:21:02 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 15:21:02 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 15:21:03 Check angles 15:21:03 SkyScan query 15:21:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:21:03 Msec=750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:21:03 Message to Master queued w/err=0: serial=13306 error=0 [UTC 2018-12-4 15:21:08] 15:21:08 Received message from Master: op=Filter serial=13307 15:21:08 Color wheel filter change from 0 to 0 15:21:08 FLIGetFilterPos err=0 currentPosition=0 15:21:08 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:08 Filter is already there-color wheel unchanged 15:21:08 Received message from Master: op=Shutter serial=13308 15:21:08 Shutter LASER open 15:21:09 Received message from Camera: op=State serial=13310 15:21:09 GetSingleValue result=40 Value=cccccccc 15:21:09 SkyScan query 15:21:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:21:09 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:09 Parameters OK 15:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:09 Set A/D data flow result=40 15:21:09 Set A/D channel type result=40 15:21:09 Set A/D encoding result=40 15:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:09 Set channel filter=0.000000e+000 result=40 15:21:09 Config A/D Result=40 15:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:09 Get A/D filter: -9.255963e+061 result=40 15:21:09 Get A/D value=-858993460 result=40 15:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:09 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:09 Parameters OK 15:21:09 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:09 Set A/D data flow result=40 15:21:09 Set A/D channel type result=40 15:21:09 Set A/D encoding result=40 15:21:09 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:09 Set channel filter=0.000000e+000 result=40 15:21:09 Config A/D Result=40 15:21:09 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:09 Get A/D filter: -9.255963e+061 result=40 15:21:09 Get A/D value=-858993460 result=40 15:21:09 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:09 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:09 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:09 Aux= 15:21:09 Message to Camera, serial 13310 queued 15:21:12 Received message from Master: op=Shutter serial=13314 15:21:12 Shutter LASER close 15:21:12 Received message from Master: op=PointingHead serial=13318 15:21:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:21:12 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:21:13 Point started: ret=0 15:21:13 point_skyscan result=0 15:21:13 Check angles 15:21:13 SkyScan query 15:21:14 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.52<-21568 Statuses=0009 0009 15:21:14 Msec=0 True Az=135.72 Ze=-143.52 Az status=0009 Ze status=0009 15:21:14 Check angles 15:21:14 SkyScan query 15:21:15 SkyScan query done: ret=0 az=153.555<-10237 ze=-122.115<-20141 Statuses=0009 0009 15:21:15 Msec=750 True Az=153.555 Ze=-122.115 Az status=0009 Ze status=0009 15:21:15 Check angles 15:21:15 SkyScan query 15:21:15 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.13<-18742 Statuses=0009 0009 15:21:15 Msec=1500 True Az=171.015 Ze=-101.13 Az status=0009 Ze status=0009 15:21:16 Check angles 15:21:16 SkyScan query 15:21:16 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.235<-17349 Statuses=0008 0009 15:21:16 Msec=2250 True Az=176.025 Ze=-80.235 Az status=0008 Ze status=0009 15:21:16 Check angles 15:21:16 SkyScan query 15:21:17 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 15:21:17 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 15:21:17 Check angles 15:21:17 SkyScan query 15:21:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:21:18 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:21:18 Message to Master queued w/err=0: serial=13318 error=0 15:21:23 Received message from Master: op=Filter serial=13319 15:21:23 Color wheel filter change from 0 to 0 15:21:23 FLIGetFilterPos err=0 currentPosition=0 15:21:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:21:23 Filter is already there-color wheel unchanged 15:21:23 Received message from Master: op=Shutter serial=13320 15:21:23 Shutter LASER close 15:21:23 Received message from Camera: op=State serial=13322 15:21:23 GetSingleValue result=40 Value=cccccccc 15:21:23 SkyScan query 15:21:24 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:21:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:24 Parameters OK 15:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:24 Set A/D data flow result=40 15:21:24 Set A/D channel type result=40 15:21:24 Set A/D encoding result=40 15:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:24 Set channel filter=0.000000e+000 result=40 15:21:24 Config A/D Result=40 15:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:24 Get A/D filter: -9.255963e+061 result=40 15:21:24 Get A/D value=-858993460 result=40 15:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:21:24 Parameters OK 15:21:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:21:24 Set A/D data flow result=40 15:21:24 Set A/D channel type result=40 15:21:24 Set A/D encoding result=40 15:21:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:21:24 Set channel filter=0.000000e+000 result=40 15:21:24 Config A/D Result=40 15:21:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:21:24 Get A/D filter: -9.255963e+061 result=40 15:21:24 Get A/D value=-858993460 result=40 15:21:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:21:24 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:21:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:21:24 Aux= 15:21:24 Message to Camera, serial 13322 queued 15:21:49 Received message from Master: op=Identify serial=13323 15:21:54 Received message from Master: op=PointingHead serial=13332 15:21:54 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:21:54 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:21:55 Point started: ret=0 15:21:55 point_skyscan result=0 15:21:56 Check angles 15:21:56 SkyScan query 15:21:56 SkyScan query done: ret=0 az=153.075<-10205 ze=-21.885<-13459 Statuses=0009 0009 15:21:56 Msec=0 True Az=153.075 Ze=-21.885 Az status=0009 Ze status=0009 15:21:56 Check angles 15:21:56 SkyScan query 15:21:57 SkyScan query done: ret=0 az=135.69<-9046 ze=-0.93<-12062 Statuses=0009 0009 15:21:57 Msec=750 True Az=135.69 Ze=-0.93 Az status=0009 Ze status=0009 15:21:57 Check angles 15:21:57 SkyScan query 15:21:58 SkyScan query done: ret=0 az=117.735<-7849 ze=20.49<-10634 Statuses=0009 0009 15:21:58 Msec=1500 True Az=117.735 Ze=20.49 Az status=0009 Ze status=0009 15:21:58 Check angles 15:21:58 SkyScan query 15:21:58 SkyScan query done: ret=0 az=100.365<-6691 ze=41.43<-9238 Statuses=0009 0009 15:21:58 Msec=2250 True Az=100.365 Ze=41.43 Az status=0009 Ze status=0009 15:21:59 Check angles 15:21:59 SkyScan query 15:21:59 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 15:21:59 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 15:21:59 Check angles 15:21:59 SkyScan query 15:22:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:22:00 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:22:00 Message to Master queued w/err=0: serial=13332 error=0 15:22:05 Received message from Master: op=Filter serial=13333 15:22:05 Color wheel filter change from 0 to 0 15:22:05 FLIGetFilterPos err=0 currentPosition=0 15:22:05 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:05 Filter is already there-color wheel unchanged 15:22:05 Received message from Master: op=Shutter serial=13334 15:22:05 Shutter LASER close 15:22:05 Received message from Camera: op=State serial=13336 15:22:05 GetSingleValue result=40 Value=cccccccc 15:22:05 SkyScan query 15:22:06 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:22:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:06 Parameters OK 15:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:06 Set A/D data flow result=40 15:22:06 Set A/D channel type result=40 15:22:06 Set A/D encoding result=40 15:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:06 Set channel filter=0.000000e+000 result=40 15:22:06 Config A/D Result=40 15:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:06 Get A/D filter: -9.255963e+061 result=40 15:22:06 Get A/D value=-858993460 result=40 15:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:06 Parameters OK 15:22:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:06 Set A/D data flow result=40 15:22:06 Set A/D channel type result=40 15:22:06 Set A/D encoding result=40 15:22:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:06 Set channel filter=0.000000e+000 result=40 15:22:06 Config A/D Result=40 15:22:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:06 Get A/D filter: -9.255963e+061 result=40 15:22:06 Get A/D value=-858993460 result=40 15:22:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:06 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:06 Aux= 15:22:06 Message to Camera, serial 13336 queued 15:22:37 Received message from Master: op=PointingHead serial=13343 15:22:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:22:37 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:22:37 Point started: ret=0 15:22:37 point_skyscan result=0 15:22:38 Check angles 15:22:38 SkyScan query 15:22:38 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 15:22:38 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 15:22:38 Check angles 15:22:38 SkyScan query 15:22:39 SkyScan query done: ret=0 az=126.69<-8446 ze=38.505<-9433 Statuses=0009 0008 15:22:39 Msec=750 True Az=126.69 Ze=38.505 Az status=0009 Ze status=0008 15:22:39 Check angles 15:22:39 SkyScan query 15:22:40 SkyScan query done: ret=0 az=144.18<-9612 ze=38.505<-9433 Statuses=0009 0008 15:22:40 Msec=1500 True Az=144.18 Ze=38.505 Az status=0009 Ze status=0008 15:22:40 Check angles 15:22:40 SkyScan query 15:22:40 SkyScan query done: ret=0 az=161.565<-10771 ze=38.505<-9433 Statuses=0009 0008 15:22:40 Msec=2250 True Az=161.565 Ze=38.505 Az status=0009 Ze status=0008 15:22:41 Check angles 15:22:41 SkyScan query 15:22:41 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 15:22:41 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 15:22:41 Check angles 15:22:41 SkyScan query 15:22:42 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:22:42 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:22:42 Message to Master queued w/err=0: serial=13343 error=0 15:22:47 Received message from Master: op=Filter serial=13344 15:22:47 Color wheel filter change from 0 to 0 15:22:47 FLIGetFilterPos err=0 currentPosition=0 15:22:47 FLIGetStepsRemaining err=0 RemainingSteps=0 15:22:47 Filter is already there-color wheel unchanged 15:22:47 Received message from Master: op=Shutter serial=13345 15:22:47 Shutter LASER close 15:22:47 Received message from Camera: op=State serial=13347 15:22:47 GetSingleValue result=40 Value=cccccccc 15:22:47 SkyScan query 15:22:48 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:22:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:48 Parameters OK 15:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:48 Set A/D data flow result=40 15:22:48 Set A/D channel type result=40 15:22:48 Set A/D encoding result=40 15:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:48 Set channel filter=0.000000e+000 result=40 15:22:48 Config A/D Result=40 15:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:48 Get A/D filter: -9.255963e+061 result=40 15:22:48 Get A/D value=-858993460 result=40 15:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:22:48 Parameters OK 15:22:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:22:48 Set A/D data flow result=40 15:22:48 Set A/D channel type result=40 15:22:48 Set A/D encoding result=40 15:22:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:22:48 Set channel filter=0.000000e+000 result=40 15:22:48 Config A/D Result=40 15:22:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:22:48 Get A/D filter: -9.255963e+061 result=40 15:22:48 Get A/D value=-858993460 result=40 15:22:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:22:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:22:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:22:48 Aux= 15:22:48 Message to Camera, serial 13347 queued 15:23:19 Received message from Master: op=PointingHead serial=13354 15:23:19 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:23:19 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:23:19 Point started: ret=0 15:23:19 point_skyscan result=0 15:23:20 Check angles 15:23:20 SkyScan query 15:23:20 SkyScan query done: ret=0 az=152.97<-10198 ze=8.55<-11430 Statuses=0009 0009 15:23:20 Msec=0 True Az=152.97 Ze=8.55 Az status=0009 Ze status=0009 15:23:20 Check angles 15:23:20 SkyScan query 15:23:21 SkyScan query done: ret=0 az=135.42<-9028 ze=-12.405<-12827 Statuses=0009 0009 15:23:21 Msec=750 True Az=135.42 Ze=-12.405 Az status=0009 Ze status=0009 15:23:21 Check angles 15:23:21 SkyScan query 15:23:22 SkyScan query done: ret=0 az=117.945<-7863 ze=-33.36<-14224 Statuses=0009 0009 15:23:22 Msec=1500 True Az=117.945 Ze=-33.36 Az status=0009 Ze status=0009 15:23:22 Check angles 15:23:22 SkyScan query 15:23:23 SkyScan query done: ret=0 az=100.545<-6703 ze=-51.54<-15436 Statuses=0009 0009 15:23:23 Msec=2250 True Az=100.545 Ze=-51.54 Az status=0009 Ze status=0009 15:23:23 Check angles 15:23:23 SkyScan query 15:23:23 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 15:23:23 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 15:23:23 Check angles 15:23:23 SkyScan query 15:23:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:23:24 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:23:24 Message to Master queued w/err=0: serial=13354 error=0 15:23:29 Received message from Master: op=Filter serial=13355 15:23:29 Color wheel filter change from 0 to 0 15:23:29 FLIGetFilterPos err=0 currentPosition=0 15:23:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:23:29 Filter is already there-color wheel unchanged 15:23:29 Received message from Master: op=Shutter serial=13356 15:23:29 Shutter LASER close 15:23:29 Received message from Camera: op=State serial=13358 15:23:29 GetSingleValue result=40 Value=cccccccc 15:23:29 SkyScan query 15:23:30 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:23:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:30 Parameters OK 15:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:30 Set A/D data flow result=40 15:23:30 Set A/D channel type result=40 15:23:30 Set A/D encoding result=40 15:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:30 Set channel filter=0.000000e+000 result=40 15:23:30 Config A/D Result=40 15:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:30 Get A/D filter: -9.255963e+061 result=40 15:23:30 Get A/D value=-858993460 result=40 15:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:23:30 Parameters OK 15:23:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:23:30 Set A/D data flow result=40 15:23:30 Set A/D channel type result=40 15:23:30 Set A/D encoding result=40 15:23:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:23:30 Set channel filter=0.000000e+000 result=40 15:23:30 Config A/D Result=40 15:23:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:23:30 Get A/D filter: -9.255963e+061 result=40 15:23:30 Get A/D value=-858993460 result=40 15:23:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:23:30 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:23:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:23:30 Aux= 15:23:30 Message to Camera, serial 13358 queued 15:24:01 Received message from Master: op=PointingHead serial=13365 15:24:01 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:24:01 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:24:01 Point started: ret=0 15:24:01 point_skyscan result=0 15:24:02 Check angles 15:24:02 SkyScan query 15:24:02 SkyScan query done: ret=0 az=109.155<-7277 ze=-81.54<-17436 Statuses=0009 0009 15:24:02 Msec=0 True Az=109.155 Ze=-81.54 Az status=0009 Ze status=0009 15:24:03 Check angles 15:24:03 SkyScan query 15:24:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.9<-18860 Statuses=0008 0009 15:24:03 Msec=750 True Az=112.995 Ze=-102.9 Az status=0008 Ze status=0009 15:24:03 Check angles 15:24:03 SkyScan query 15:24:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.855<-20257 Statuses=0008 0009 15:24:04 Msec=1500 True Az=112.995 Ze=-123.855 Az status=0008 Ze status=0009 15:24:04 Check angles 15:24:04 SkyScan query 15:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.795<-21653 Statuses=0008 0009 15:24:05 Msec=2250 True Az=112.995 Ze=-144.795 Az status=0008 Ze status=0009 15:24:05 Check angles 15:24:05 SkyScan query 15:24:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.17<-23078 Statuses=0008 0009 15:24:05 Msec=3000 True Az=112.995 Ze=-166.17 Az status=0008 Ze status=0009 15:24:06 Check angles 15:24:06 SkyScan query 15:24:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:24:06 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:24:06 Message to Master queued w/err=0: serial=13365 error=0 15:24:11 Received message from Master: op=Filter serial=13366 15:24:11 Color wheel filter change from 0 to 0 15:24:11 FLIGetFilterPos err=0 currentPosition=0 15:24:11 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:11 Filter is already there-color wheel unchanged 15:24:11 Received message from Master: op=Shutter serial=13367 15:24:11 Shutter LASER open 15:24:12 Received message from Camera: op=State serial=13369 15:24:12 GetSingleValue result=40 Value=cccccccc 15:24:12 SkyScan query 15:24:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:24:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:12 Parameters OK 15:24:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:12 Set A/D data flow result=40 15:24:12 Set A/D channel type result=40 15:24:12 Set A/D encoding result=40 15:24:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:12 Set channel filter=0.000000e+000 result=40 15:24:12 Config A/D Result=40 15:24:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:12 Get A/D filter: -9.255963e+061 result=40 15:24:12 Get A/D value=-858993460 result=40 15:24:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:12 Parameters OK 15:24:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:12 Set A/D data flow result=40 15:24:12 Set A/D channel type result=40 15:24:12 Set A/D encoding result=40 15:24:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:12 Set channel filter=0.000000e+000 result=40 15:24:12 Config A/D Result=40 15:24:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:12 Get A/D filter: -9.255963e+061 result=40 15:24:12 Get A/D value=-858993460 result=40 15:24:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:12 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:12 Aux= 15:24:12 Message to Camera, serial 13369 queued 15:24:15 Received message from Master: op=Shutter serial=13373 15:24:15 Shutter LASER close 15:24:15 Received message from Master: op=PointingHead serial=13377 15:24:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:24:15 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:24:15 Point started: ret=0 15:24:15 point_skyscan result=0 15:24:16 Check angles 15:24:16 SkyScan query 15:24:17 SkyScan query done: ret=0 az=89.43<-5962 ze=156.75<-1550 Statuses=0009 0009 15:24:17 Msec=0 True Az=89.43 Ze=156.75 Az status=0009 Ze status=0009 15:24:17 Check angles 15:24:17 SkyScan query 15:24:17 SkyScan query done: ret=0 az=71.565<-4771 ze=135.33<-2978 Statuses=0009 0009 15:24:17 Msec=750 True Az=71.565 Ze=135.33 Az status=0009 Ze status=0009 15:24:18 Check angles 15:24:18 SkyScan query 15:24:18 SkyScan query done: ret=0 az=54.42<-3628 ze=114.39<-4374 Statuses=0009 0009 15:24:18 Msec=1500 True Az=54.42 Ze=114.39 Az status=0009 Ze status=0009 15:24:18 Check angles 15:24:18 SkyScan query 15:24:19 SkyScan query done: ret=0 az=40.965<-2731 ze=93.45<-5770 Statuses=0009 0009 15:24:19 Msec=2250 True Az=40.965 Ze=93.45 Az status=0009 Ze status=0009 15:24:19 Check angles 15:24:19 SkyScan query 15:24:20 SkyScan query done: ret=0 az=41.01<-2734 ze=72.48<-7168 Statuses=0008 0009 15:24:20 Msec=3000 True Az=41.01 Ze=72.48 Az status=0008 Ze status=0009 15:24:20 Check angles 15:24:20 SkyScan query 15:24:20 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 15:24:20 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 15:24:21 Check angles 15:24:21 SkyScan query 15:24:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:24:21 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:24:21 Message to Master queued w/err=0: serial=13377 error=0 15:24:26 Received message from Master: op=Filter serial=13378 15:24:26 Color wheel filter change from 0 to 0 15:24:26 FLIGetFilterPos err=0 currentPosition=0 15:24:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:24:26 Filter is already there-color wheel unchanged 15:24:26 Received message from Master: op=Shutter serial=13379 15:24:26 Shutter LASER close 15:24:27 Received message from Camera: op=State serial=13381 15:24:27 GetSingleValue result=40 Value=cccccccc 15:24:27 SkyScan query 15:24:27 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:24:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:27 Parameters OK 15:24:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:27 Set A/D data flow result=40 15:24:27 Set A/D channel type result=40 15:24:27 Set A/D encoding result=40 15:24:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:27 Set channel filter=0.000000e+000 result=40 15:24:27 Config A/D Result=40 15:24:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:27 Get A/D filter: -9.255963e+061 result=40 15:24:27 Get A/D value=-858993460 result=40 15:24:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:24:27 Parameters OK 15:24:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:24:27 Set A/D data flow result=40 15:24:27 Set A/D channel type result=40 15:24:27 Set A/D encoding result=40 15:24:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:24:27 Set channel filter=0.000000e+000 result=40 15:24:27 Config A/D Result=40 15:24:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:24:27 Get A/D filter: -9.255963e+061 result=40 15:24:27 Get A/D value=-858993460 result=40 15:24:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:24:27 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:24:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:24:27 Aux= 15:24:27 Message to Camera, serial 13381 queued 15:24:58 Received message from Master: op=PointingHead serial=13388 15:24:58 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:24:58 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:24:58 Point started: ret=0 15:24:58 point_skyscan result=0 15:24:59 Check angles 15:24:59 SkyScan query 15:25:00 SkyScan query done: ret=0 az=64.275<-4285 ze=66.555<-7563 Statuses=0009 0008 15:25:00 Msec=0 True Az=64.275 Ze=66.555 Az status=0009 Ze status=0008 15:25:00 Check angles 15:25:00 SkyScan query 15:25:00 SkyScan query done: ret=0 az=81.69<-5446 ze=66.495<-7567 Statuses=0009 0008 15:25:00 Msec=750 True Az=81.69 Ze=66.495 Az status=0009 Ze status=0008 15:25:01 Check angles 15:25:01 SkyScan query 15:25:01 SkyScan query done: ret=0 az=99.3<-6620 ze=66.495<-7567 Statuses=0009 0008 15:25:01 Msec=1500 True Az=99.3 Ze=66.495 Az status=0009 Ze status=0008 15:25:01 Check angles 15:25:01 SkyScan query 15:25:02 SkyScan query done: ret=0 az=116.685<-7779 ze=66.495<-7567 Statuses=0009 0008 15:25:02 Msec=2250 True Az=116.685 Ze=66.495 Az status=0009 Ze status=0008 15:25:02 Check angles 15:25:02 SkyScan query 15:25:03 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 15:25:03 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 15:25:03 Check angles 15:25:03 SkyScan query 15:25:03 SkyScan query done: ret=0 az=151.47<-10098 ze=66.495<-7567 Statuses=0009 0008 15:25:03 Msec=3750 True Az=151.47 Ze=66.495 Az status=0009 Ze status=0008 15:25:04 Check angles 15:25:04 SkyScan query 15:25:04 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 15:25:04 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 15:25:04 Message to Master queued w/err=0: serial=13388 error=0 15:25:09 Received message from Master: op=Filter serial=13389 15:25:09 Color wheel filter change from 0 to 0 15:25:09 FLIGetFilterPos err=0 currentPosition=0 15:25:09 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:09 Filter is already there-color wheel unchanged 15:25:09 Received message from Master: op=Shutter serial=13390 15:25:09 Shutter LASER close 15:25:09 Received message from Camera: op=State serial=13392 15:25:09 GetSingleValue result=40 Value=cccccccc 15:25:09 SkyScan query 15:25:10 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:25:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:10 Parameters OK 15:25:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:10 Set A/D data flow result=40 15:25:10 Set A/D channel type result=40 15:25:10 Set A/D encoding result=40 15:25:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:10 Set channel filter=0.000000e+000 result=40 15:25:10 Config A/D Result=40 15:25:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:10 Get A/D filter: -9.255963e+061 result=40 15:25:10 Get A/D value=-858993460 result=40 15:25:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:10 Parameters OK 15:25:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:10 Set A/D data flow result=40 15:25:10 Set A/D channel type result=40 15:25:10 Set A/D encoding result=40 15:25:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:10 Set channel filter=0.000000e+000 result=40 15:25:10 Config A/D Result=40 15:25:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:10 Get A/D filter: -9.255963e+061 result=40 15:25:10 Get A/D value=-858993460 result=40 15:25:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:10 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:10 Aux= 15:25:10 Message to Camera, serial 13392 queued 15:25:41 Received message from Master: op=PointingHead serial=13399 15:25:41 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:25:41 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:25:41 Point started: ret=0 15:25:41 point_skyscan result=0 15:25:42 Check angles 15:25:42 SkyScan query 15:25:42 SkyScan query done: ret=0 az=134.775<-8985 ze=36.465<-9569 Statuses=0009 0009 15:25:42 Msec=0 True Az=134.775 Ze=36.465 Az status=0009 Ze status=0009 15:25:43 Check angles 15:25:43 SkyScan query 15:25:43 SkyScan query done: ret=0 az=117.3<-7820 ze=15.51<-10966 Statuses=0009 0009 15:25:43 Msec=750 True Az=117.3 Ze=15.51 Az status=0009 Ze status=0009 15:25:43 Check angles 15:25:43 SkyScan query 15:25:44 SkyScan query done: ret=0 az=99.915<-6661 ze=-5.475<-12365 Statuses=0009 0009 15:25:44 Msec=1500 True Az=99.915 Ze=-5.475 Az status=0009 Ze status=0009 15:25:44 Check angles 15:25:44 SkyScan query 15:25:45 SkyScan query done: ret=0 az=82.29<-5486 ze=-26.445<-13763 Statuses=0009 0009 15:25:45 Msec=2250 True Az=82.29 Ze=-26.445 Az status=0009 Ze status=0009 15:25:45 Check angles 15:25:45 SkyScan query 15:25:45 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 15:25:45 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 15:25:46 Check angles 15:25:46 SkyScan query 15:25:46 SkyScan query done: ret=0 az=47.385<-3159 ze=-38.535<-14569 Statuses=0009 0008 15:25:46 Msec=3750 True Az=47.385 Ze=-38.535 Az status=0009 Ze status=0008 15:25:46 Check angles 15:25:46 SkyScan query 15:25:47 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 15:25:47 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 15:25:47 Message to Master queued w/err=0: serial=13399 error=0 15:25:52 Received message from Master: op=Filter serial=13400 15:25:52 Color wheel filter change from 0 to 0 15:25:52 FLIGetFilterPos err=0 currentPosition=0 15:25:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:25:52 Filter is already there-color wheel unchanged 15:25:52 Received message from Master: op=Shutter serial=13401 15:25:52 Shutter LASER close 15:25:52 Received message from Camera: op=State serial=13403 15:25:52 GetSingleValue result=40 Value=cccccccc 15:25:52 SkyScan query 15:25:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:25:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:53 Parameters OK 15:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:53 Set A/D data flow result=40 15:25:53 Set A/D channel type result=40 15:25:53 Set A/D encoding result=40 15:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:53 Set channel filter=0.000000e+000 result=40 15:25:53 Config A/D Result=40 15:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:53 Get A/D filter: -9.255963e+061 result=40 15:25:53 Get A/D value=-858993460 result=40 15:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:25:53 Parameters OK 15:25:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:25:53 Set A/D data flow result=40 15:25:53 Set A/D channel type result=40 15:25:53 Set A/D encoding result=40 15:25:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:25:53 Set channel filter=0.000000e+000 result=40 15:25:53 Config A/D Result=40 15:25:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:25:53 Get A/D filter: -9.255963e+061 result=40 15:25:53 Get A/D value=-858993460 result=40 15:25:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:25:53 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:25:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:25:53 Aux= 15:25:53 Message to Camera, serial 13403 queued 15:26:24 Received message from Master: op=PointingHead serial=13410 15:26:24 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:26:24 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:26:24 Point started: ret=0 15:26:24 point_skyscan result=0 15:26:25 Check angles 15:26:25 SkyScan query 15:26:25 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.295<-16553 Statuses=0009 0009 15:26:25 Msec=0 True Az=63.84 Ze=-68.295 Az status=0009 Ze status=0009 15:26:25 Check angles 15:26:25 SkyScan query 15:26:26 SkyScan query done: ret=0 az=81.465<-5431 ze=-89.25<-17950 Statuses=0009 0009 15:26:26 Msec=750 True Az=81.465 Ze=-89.25 Az status=0009 Ze status=0009 15:26:26 Check angles 15:26:26 SkyScan query 15:26:27 SkyScan query done: ret=0 az=99.03<-6602 ze=-110.19<-19346 Statuses=0009 0009 15:26:27 Msec=1500 True Az=99.03 Ze=-110.19 Az status=0009 Ze status=0009 15:26:27 Check angles 15:26:27 SkyScan query 15:26:27 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.58<-20772 Statuses=0009 0009 15:26:27 Msec=2250 True Az=116.835 Ze=-131.58 Az status=0009 Ze status=0009 15:26:28 Check angles 15:26:28 SkyScan query 15:26:28 SkyScan query done: ret=0 az=131.13<-8742 ze=-141.54<-21436 Statuses=0009 0008 15:26:28 Msec=3000 True Az=131.13 Ze=-141.54 Az status=0009 Ze status=0008 15:26:28 Check angles 15:26:28 SkyScan query 15:26:29 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:26:29 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:26:29 Message to Master queued w/err=0: serial=13410 error=0 15:26:34 Received message from Master: op=Filter serial=13411 15:26:34 Color wheel filter change from 0 to 0 15:26:34 FLIGetFilterPos err=0 currentPosition=0 15:26:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:26:34 Filter is already there-color wheel unchanged 15:26:34 Received message from Master: op=Shutter serial=13412 15:26:34 Shutter LASER close 15:26:34 Received message from Camera: op=State serial=13414 15:26:34 GetSingleValue result=40 Value=cccccccc 15:26:34 SkyScan query 15:26:35 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:26:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:35 Parameters OK 15:26:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:35 Set A/D data flow result=40 15:26:35 Set A/D channel type result=40 15:26:35 Set A/D encoding result=40 15:26:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:35 Set channel filter=0.000000e+000 result=40 15:26:35 Config A/D Result=40 15:26:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:35 Get A/D filter: -9.255963e+061 result=40 15:26:35 Get A/D value=-858993460 result=40 15:26:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:26:35 Parameters OK 15:26:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:26:35 Set A/D data flow result=40 15:26:35 Set A/D channel type result=40 15:26:35 Set A/D encoding result=40 15:26:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:26:35 Set channel filter=0.000000e+000 result=40 15:26:35 Config A/D Result=40 15:26:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:26:35 Get A/D filter: -9.255963e+061 result=40 15:26:35 Get A/D value=-858993460 result=40 15:26:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:26:35 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:26:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:26:35 Aux= 15:26:35 Message to Camera, serial 13414 queued 15:27:06 Received message from Master: op=PointingHead serial=13421 15:27:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:27:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:27:06 Point started: ret=0 15:27:06 point_skyscan result=0 15:27:07 Check angles 15:27:07 SkyScan query 15:27:07 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.135<-23409 Statuses=0009 0009 15:27:07 Msec=0 True Az=113.01 Ze=-171.135 Az status=0009 Ze status=0009 15:27:07 Check angles 15:27:07 SkyScan query 15:27:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:27:08 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:27:08 Message to Master queued w/err=0: serial=13421 error=0 15:27:13 Received message from Master: op=Filter serial=13422 15:27:13 Color wheel filter change from 0 to 0 15:27:13 FLIGetFilterPos err=0 currentPosition=0 15:27:13 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:13 Filter is already there-color wheel unchanged 15:27:13 Received message from Master: op=Shutter serial=13423 15:27:13 Shutter LASER open 15:27:13 Received message from Camera: op=State serial=13425 15:27:13 GetSingleValue result=40 Value=cccccccc 15:27:13 SkyScan query 15:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:27:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:14 Parameters OK 15:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:14 Set A/D data flow result=40 15:27:14 Set A/D channel type result=40 15:27:14 Set A/D encoding result=40 15:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:14 Set channel filter=0.000000e+000 result=40 15:27:14 Config A/D Result=40 15:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:14 Get A/D filter: -9.255963e+061 result=40 15:27:14 Get A/D value=-858993460 result=40 15:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:14 Parameters OK 15:27:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:14 Set A/D data flow result=40 15:27:14 Set A/D channel type result=40 15:27:14 Set A/D encoding result=40 15:27:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:14 Set channel filter=0.000000e+000 result=40 15:27:14 Config A/D Result=40 15:27:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:14 Get A/D filter: -9.255963e+061 result=40 15:27:14 Get A/D value=-858993460 result=40 15:27:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:14 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:14 Aux= 15:27:14 Message to Camera, serial 13425 queued 15:27:16 Received message from Master: op=Shutter serial=13429 15:27:16 Shutter LASER close 15:27:17 Received message from Master: op=PointingHead serial=13433 15:27:17 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:27:17 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:27:17 Point started: ret=0 15:27:17 point_skyscan result=0 15:27:18 Check angles 15:27:18 SkyScan query 15:27:19 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.04<-21536 Statuses=0009 0009 15:27:19 Msec=0 True Az=136.155 Ze=-143.04 Az status=0009 Ze status=0009 15:27:19 Check angles 15:27:19 SkyScan query 15:27:20 SkyScan query done: ret=0 az=154.035<-10269 ze=-121.635<-20109 Statuses=0009 0009 15:27:20 Msec=750 True Az=154.035 Ze=-121.635 Az status=0009 Ze status=0009 15:27:20 Check angles 15:27:20 SkyScan query 15:27:20 SkyScan query done: ret=0 az=171.42<-11428 ze=-100.71<-18714 Statuses=0009 0009 15:27:20 Msec=1500 True Az=171.42 Ze=-100.71 Az status=0009 Ze status=0009 15:27:20 Check angles 15:27:20 SkyScan query 15:27:21 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.755<-17317 Statuses=0008 0009 15:27:21 Msec=2250 True Az=176.025 Ze=-79.755 Az status=0008 Ze status=0009 15:27:21 Check angles 15:27:21 SkyScan query 15:27:22 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.8<-15920 Statuses=0008 0009 15:27:22 Msec=3000 True Az=175.995 Ze=-58.8 Az status=0008 Ze status=0009 15:27:22 Check angles 15:27:22 SkyScan query 15:27:23 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:27:23 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:27:23 Message to Master queued w/err=0: serial=13433 error=0 15:27:28 Received message from Master: op=Filter serial=13434 15:27:28 Color wheel filter change from 0 to 0 15:27:28 FLIGetFilterPos err=0 currentPosition=0 15:27:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:27:28 Filter is already there-color wheel unchanged 15:27:28 Received message from Master: op=Shutter serial=13435 15:27:28 Shutter LASER close 15:27:28 Received message from Camera: op=State serial=13437 15:27:28 GetSingleValue result=40 Value=cccccccc 15:27:28 SkyScan query 15:27:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:27:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:28 Parameters OK 15:27:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:28 Set A/D data flow result=40 15:27:28 Set A/D channel type result=40 15:27:28 Set A/D encoding result=40 15:27:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:28 Set channel filter=0.000000e+000 result=40 15:27:28 Config A/D Result=40 15:27:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:28 Get A/D filter: -9.255963e+061 result=40 15:27:28 Get A/D value=-858993460 result=40 15:27:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:27:28 Parameters OK 15:27:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:27:28 Set A/D data flow result=40 15:27:28 Set A/D channel type result=40 15:27:28 Set A/D encoding result=40 15:27:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:27:28 Set channel filter=0.000000e+000 result=40 15:27:28 Config A/D Result=40 15:27:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:27:28 Get A/D filter: -9.255963e+061 result=40 15:27:28 Get A/D value=-858993460 result=40 15:27:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:27:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:27:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:27:28 Aux= 15:27:28 Message to Camera, serial 13437 queued 15:27:59 Received message from Master: op=PointingHead serial=13444 15:27:59 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:27:59 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:28:00 Point started: ret=0 15:28:00 point_skyscan result=0 15:28:00 Check angles 15:28:00 SkyScan query 15:28:01 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.48<-13432 Statuses=0009 0009 15:28:01 Msec=0 True Az=152.775 Ze=-21.48 Az status=0009 Ze status=0009 15:28:01 Check angles 15:28:01 SkyScan query 15:28:02 SkyScan query done: ret=0 az=135.315<-9021 ze=-0.48<-12032 Statuses=0009 0009 15:28:02 Msec=750 True Az=135.315 Ze=-0.48 Az status=0009 Ze status=0009 15:28:02 Check angles 15:28:02 SkyScan query 15:28:02 SkyScan query done: ret=0 az=117.405<-7827 ze=20.88<-10608 Statuses=0009 0009 15:28:02 Msec=1500 True Az=117.405 Ze=20.88 Az status=0009 Ze status=0009 15:28:03 Check angles 15:28:03 SkyScan query 15:28:03 SkyScan query done: ret=0 az=100.02<-6668 ze=41.85<-9210 Statuses=0009 0009 15:28:03 Msec=2250 True Az=100.02 Ze=41.85 Az status=0009 Ze status=0009 15:28:03 Check angles 15:28:03 SkyScan query 15:28:04 SkyScan query done: ret=0 az=86.01<-5734 ze=51.57<-8562 Statuses=0009 0008 15:28:04 Msec=3000 True Az=86.01 Ze=51.57 Az status=0009 Ze status=0008 15:28:04 Check angles 15:28:04 SkyScan query 15:28:05 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:28:05 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 15:28:05 Message to Master queued w/err=0: serial=13444 error=0 15:28:10 Received message from Master: op=Filter serial=13445 15:28:10 Color wheel filter change from 0 to 0 15:28:10 FLIGetFilterPos err=0 currentPosition=0 15:28:10 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:10 Filter is already there-color wheel unchanged 15:28:10 Received message from Master: op=Shutter serial=13446 15:28:10 Shutter LASER close 15:28:10 Received message from Camera: op=State serial=13448 15:28:10 GetSingleValue result=40 Value=cccccccc 15:28:10 SkyScan query 15:28:11 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:28:11 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:11 Parameters OK 15:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:11 Set A/D data flow result=40 15:28:11 Set A/D channel type result=40 15:28:11 Set A/D encoding result=40 15:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:11 Set channel filter=0.000000e+000 result=40 15:28:11 Config A/D Result=40 15:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:11 Get A/D filter: -9.255963e+061 result=40 15:28:11 Get A/D value=-858993460 result=40 15:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:11 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:11 Parameters OK 15:28:11 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:11 Set A/D data flow result=40 15:28:11 Set A/D channel type result=40 15:28:11 Set A/D encoding result=40 15:28:11 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:11 Set channel filter=0.000000e+000 result=40 15:28:11 Config A/D Result=40 15:28:11 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:11 Get A/D filter: -9.255963e+061 result=40 15:28:11 Get A/D value=-858993460 result=40 15:28:11 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:11 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:11 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:11 Aux= 15:28:11 Message to Camera, serial 13448 queued 15:28:41 Received message from Master: op=PointingHead serial=13455 15:28:41 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:28:41 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:28:42 Point started: ret=0 15:28:42 point_skyscan result=0 15:28:43 Check angles 15:28:43 SkyScan query 15:28:43 SkyScan query done: ret=0 az=109.05<-7270 ze=38.49<-9434 Statuses=0009 0008 15:28:43 Msec=0 True Az=109.05 Ze=38.49 Az status=0009 Ze status=0008 15:28:43 Check angles 15:28:43 SkyScan query 15:28:44 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 15:28:44 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 15:28:44 Check angles 15:28:44 SkyScan query 15:28:45 SkyScan query done: ret=0 az=144.51<-9634 ze=38.505<-9433 Statuses=0009 0008 15:28:45 Msec=1500 True Az=144.51 Ze=38.505 Az status=0009 Ze status=0008 15:28:45 Check angles 15:28:45 SkyScan query 15:28:45 SkyScan query done: ret=0 az=161.79<-10786 ze=38.505<-9433 Statuses=0009 0008 15:28:45 Msec=2250 True Az=161.79 Ze=38.505 Az status=0009 Ze status=0008 15:28:46 Check angles 15:28:46 SkyScan query 15:28:46 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 15:28:46 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 15:28:46 Check angles 15:28:46 SkyScan query 15:28:47 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:28:47 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:28:47 Message to Master queued w/err=0: serial=13455 error=0 15:28:52 Received message from Master: op=Filter serial=13456 15:28:52 Color wheel filter change from 0 to 0 15:28:52 FLIGetFilterPos err=0 currentPosition=0 15:28:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:28:52 Filter is already there-color wheel unchanged 15:28:52 Received message from Master: op=Shutter serial=13457 15:28:52 Shutter LASER close 15:28:52 Received message from Camera: op=State serial=13459 15:28:52 GetSingleValue result=40 Value=cccccccc 15:28:52 SkyScan query 15:28:53 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:28:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:53 Parameters OK 15:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:53 Set A/D data flow result=40 15:28:53 Set A/D channel type result=40 15:28:53 Set A/D encoding result=40 15:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:53 Set channel filter=0.000000e+000 result=40 15:28:53 Config A/D Result=40 15:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:53 Get A/D filter: -9.255963e+061 result=40 15:28:53 Get A/D value=-858993460 result=40 15:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:28:53 Parameters OK 15:28:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:28:53 Set A/D data flow result=40 15:28:53 Set A/D channel type result=40 15:28:53 Set A/D encoding result=40 15:28:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:28:53 Set channel filter=0.000000e+000 result=40 15:28:53 Config A/D Result=40 15:28:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:28:53 Get A/D filter: -9.255963e+061 result=40 15:28:53 Get A/D value=-858993460 result=40 15:28:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:28:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:28:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:28:53 Aux= 15:28:53 Message to Camera, serial 13459 queued 15:29:23 Received message from Master: op=PointingHead serial=13466 15:29:23 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:29:23 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:29:24 Point started: ret=0 15:29:24 point_skyscan result=0 15:29:25 Check angles 15:29:25 SkyScan query 15:29:25 SkyScan query done: ret=0 az=153<-10200 ze=8.64<-11424 Statuses=0009 0009 15:29:25 Msec=0 True Az=153 Ze=8.64 Az status=0009 Ze status=0009 15:29:25 Check angles 15:29:25 SkyScan query 15:29:26 SkyScan query done: ret=0 az=135.465<-9031 ze=-12.315<-12821 Statuses=0009 0009 15:29:26 Msec=750 True Az=135.465 Ze=-12.315 Az status=0009 Ze status=0009 15:29:26 Check angles 15:29:26 SkyScan query 15:29:27 SkyScan query done: ret=0 az=117.6<-7840 ze=-33.66<-14244 Statuses=0009 0009 15:29:27 Msec=1500 True Az=117.6 Ze=-33.66 Az status=0009 Ze status=0009 15:29:27 Check angles 15:29:27 SkyScan query 15:29:27 SkyScan query done: ret=0 az=100.215<-6681 ze=-51.555<-15437 Statuses=0009 0009 15:29:27 Msec=2250 True Az=100.215 Ze=-51.555 Az status=0009 Ze status=0009 15:29:28 Check angles 15:29:28 SkyScan query 15:29:28 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:29:28 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:29:28 Check angles 15:29:28 SkyScan query 15:29:29 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:29:29 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:29:29 Message to Master queued w/err=0: serial=13466 error=0 15:29:34 Received message from Master: op=Filter serial=13467 15:29:34 Color wheel filter change from 0 to 0 [UTC 2018-12-4 15:29:34] 15:29:34 FLIGetFilterPos err=0 currentPosition=0 15:29:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:29:34 Filter is already there-color wheel unchanged 15:29:34 Received message from Master: op=Shutter serial=13468 15:29:34 Shutter LASER close 15:29:34 Received message from Camera: op=State serial=13470 15:29:34 GetSingleValue result=40 Value=cccccccc 15:29:34 SkyScan query 15:29:35 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:29:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:35 Parameters OK 15:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:35 Set A/D data flow result=40 15:29:35 Set A/D channel type result=40 15:29:35 Set A/D encoding result=40 15:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:35 Set channel filter=0.000000e+000 result=40 15:29:35 Config A/D Result=40 15:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:35 Get A/D filter: -9.255963e+061 result=40 15:29:35 Get A/D value=-858993460 result=40 15:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:29:35 Parameters OK 15:29:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:29:35 Set A/D data flow result=40 15:29:35 Set A/D channel type result=40 15:29:35 Set A/D encoding result=40 15:29:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:29:35 Set channel filter=0.000000e+000 result=40 15:29:35 Config A/D Result=40 15:29:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:29:35 Get A/D filter: -9.255963e+061 result=40 15:29:35 Get A/D value=-858993460 result=40 15:29:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:29:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:29:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:29:35 Aux= 15:29:35 Message to Camera, serial 13470 queued 15:30:06 Received message from Master: op=PointingHead serial=13477 15:30:06 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:30:06 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:30:06 Point started: ret=0 15:30:06 point_skyscan result=0 15:30:07 Check angles 15:30:07 SkyScan query 15:30:07 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.615<-17441 Statuses=0009 0009 15:30:07 Msec=0 True Az=109.215 Ze=-81.615 Az status=0009 Ze status=0009 15:30:08 Check angles 15:30:08 SkyScan query 15:30:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.99<-18866 Statuses=0008 0009 15:30:08 Msec=750 True Az=112.995 Ze=-102.99 Az status=0008 Ze status=0009 15:30:08 Check angles 15:30:08 SkyScan query 15:30:09 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.945<-20263 Statuses=0008 0009 15:30:09 Msec=1500 True Az=112.995 Ze=-123.945 Az status=0008 Ze status=0009 15:30:09 Check angles 15:30:09 SkyScan query 15:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.885<-21659 Statuses=0008 0009 15:30:10 Msec=2250 True Az=112.995 Ze=-144.885 Az status=0008 Ze status=0009 15:30:10 Check angles 15:30:10 SkyScan query 15:30:10 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.84<-23056 Statuses=0008 0009 15:30:10 Msec=3000 True Az=112.995 Ze=-165.84 Az status=0008 Ze status=0009 15:30:11 Check angles 15:30:11 SkyScan query 15:30:11 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:30:11 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:30:11 Message to Master queued w/err=0: serial=13477 error=0 15:30:16 Received message from Master: op=Filter serial=13478 15:30:16 Color wheel filter change from 0 to 0 15:30:16 FLIGetFilterPos err=0 currentPosition=0 15:30:16 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:16 Filter is already there-color wheel unchanged 15:30:16 Received message from Master: op=Shutter serial=13479 15:30:16 Shutter LASER open 15:30:16 Received message from Camera: op=State serial=13481 15:30:16 GetSingleValue result=40 Value=cccccccc 15:30:16 SkyScan query 15:30:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:30:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:17 Parameters OK 15:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:17 Set A/D data flow result=40 15:30:17 Set A/D channel type result=40 15:30:17 Set A/D encoding result=40 15:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:17 Set channel filter=0.000000e+000 result=40 15:30:17 Config A/D Result=40 15:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:17 Get A/D filter: -9.255963e+061 result=40 15:30:17 Get A/D value=-858993460 result=40 15:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:17 Parameters OK 15:30:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:17 Set A/D data flow result=40 15:30:17 Set A/D channel type result=40 15:30:17 Set A/D encoding result=40 15:30:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:17 Set channel filter=0.000000e+000 result=40 15:30:17 Config A/D Result=40 15:30:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:17 Get A/D filter: -9.255963e+061 result=40 15:30:17 Get A/D value=-858993460 result=40 15:30:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:17 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:17 Aux= 15:30:17 Message to Camera, serial 13481 queued 15:30:19 Received message from Master: op=Shutter serial=13485 15:30:19 Shutter LASER close 15:30:20 Received message from Master: op=PointingHead serial=13489 15:30:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:30:20 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:30:20 Point started: ret=0 15:30:20 point_skyscan result=0 15:30:21 Check angles 15:30:21 SkyScan query 15:30:22 SkyScan query done: ret=0 az=89.22<-5948 ze=156.72<-1552 Statuses=0009 0009 15:30:22 Msec=0 True Az=89.22 Ze=156.72 Az status=0009 Ze status=0009 15:30:22 Check angles 15:30:22 SkyScan query 15:30:22 SkyScan query done: ret=0 az=71.775<-4785 ze=135.735<-2951 Statuses=0009 0009 15:30:22 Msec=750 True Az=71.775 Ze=135.735 Az status=0009 Ze status=0009 15:30:23 Check angles 15:30:23 SkyScan query 15:30:23 SkyScan query done: ret=0 az=54.57<-3638 ze=114.81<-4346 Statuses=0009 0009 15:30:23 Msec=1500 True Az=54.57 Ze=114.81 Az status=0009 Ze status=0009 15:30:23 Check angles 15:30:23 SkyScan query 15:30:24 SkyScan query done: ret=0 az=40.92<-2728 ze=93.84<-5744 Statuses=0009 0009 15:30:24 Msec=2250 True Az=40.92 Ze=93.84 Az status=0009 Ze status=0009 15:30:24 Check angles 15:30:24 SkyScan query 15:30:25 SkyScan query done: ret=0 az=40.995<-2733 ze=72.9<-7140 Statuses=0008 0009 15:30:25 Msec=3000 True Az=40.995 Ze=72.9 Az status=0008 Ze status=0009 15:30:25 Check angles 15:30:25 SkyScan query 15:30:25 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 15:30:25 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 15:30:26 Check angles 15:30:26 SkyScan query 15:30:26 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:30:26 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:30:26 Message to Master queued w/err=0: serial=13489 error=0 15:30:31 Received message from Master: op=Filter serial=13490 15:30:31 Color wheel filter change from 0 to 0 15:30:31 FLIGetFilterPos err=0 currentPosition=0 15:30:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:30:31 Filter is already there-color wheel unchanged 15:30:31 Received message from Master: op=Shutter serial=13491 15:30:31 Shutter LASER close 15:30:31 Received message from Camera: op=State serial=13493 15:30:31 GetSingleValue result=40 Value=cccccccc 15:30:31 SkyScan query 15:30:32 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:30:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:32 Parameters OK 15:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:32 Set A/D data flow result=40 15:30:32 Set A/D channel type result=40 15:30:32 Set A/D encoding result=40 15:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:32 Set channel filter=0.000000e+000 result=40 15:30:32 Config A/D Result=40 15:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:32 Get A/D filter: -9.255963e+061 result=40 15:30:32 Get A/D value=-858993460 result=40 15:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:30:32 Parameters OK 15:30:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:30:32 Set A/D data flow result=40 15:30:32 Set A/D channel type result=40 15:30:32 Set A/D encoding result=40 15:30:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:30:32 Set channel filter=0.000000e+000 result=40 15:30:32 Config A/D Result=40 15:30:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:30:32 Get A/D filter: -9.255963e+061 result=40 15:30:32 Get A/D value=-858993460 result=40 15:30:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:30:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:30:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:30:32 Aux= 15:30:32 Message to Camera, serial 13493 queued 15:31:03 Received message from Master: op=PointingHead serial=13500 15:31:03 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:31:03 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:31:03 Point started: ret=0 15:31:03 point_skyscan result=0 15:31:04 Check angles 15:31:04 SkyScan query 15:31:05 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 15:31:05 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 15:31:05 Check angles 15:31:05 SkyScan query 15:31:05 SkyScan query done: ret=0 az=81.885<-5459 ze=66.495<-7567 Statuses=0009 0008 15:31:05 Msec=750 True Az=81.885 Ze=66.495 Az status=0009 Ze status=0008 15:31:05 Check angles 15:31:05 SkyScan query 15:31:06 SkyScan query done: ret=0 az=99.435<-6629 ze=66.495<-7567 Statuses=0009 0008 15:31:06 Msec=1500 True Az=99.435 Ze=66.495 Az status=0009 Ze status=0008 15:31:06 Check angles 15:31:06 SkyScan query 15:31:07 SkyScan query done: ret=0 az=116.97<-7798 ze=66.495<-7567 Statuses=0009 0008 15:31:07 Msec=2250 True Az=116.97 Ze=66.495 Az status=0009 Ze status=0008 15:31:07 Check angles 15:31:07 SkyScan query 15:31:08 SkyScan query done: ret=0 az=134.325<-8955 ze=66.495<-7567 Statuses=0009 0008 15:31:08 Msec=3000 True Az=134.325 Ze=66.495 Az status=0009 Ze status=0008 15:31:08 Check angles 15:31:08 SkyScan query 15:31:08 SkyScan query done: ret=0 az=151.71<-10114 ze=66.495<-7567 Statuses=0009 0008 15:31:08 Msec=3750 True Az=151.71 Ze=66.495 Az status=0009 Ze status=0008 15:31:08 Check angles 15:31:08 SkyScan query 15:31:09 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:31:09 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:31:09 Message to Master queued w/err=0: serial=13500 error=0 15:31:14 Received message from Master: op=Filter serial=13501 15:31:14 Color wheel filter change from 0 to 0 15:31:14 FLIGetFilterPos err=0 currentPosition=0 15:31:14 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:14 Filter is already there-color wheel unchanged 15:31:14 Received message from Master: op=Shutter serial=13502 15:31:14 Shutter LASER close 15:31:14 Received message from Camera: op=State serial=13504 15:31:14 GetSingleValue result=40 Value=cccccccc 15:31:14 SkyScan query 15:31:15 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:31:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:15 Parameters OK 15:31:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:15 Set A/D data flow result=40 15:31:15 Set A/D channel type result=40 15:31:15 Set A/D encoding result=40 15:31:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:15 Set channel filter=0.000000e+000 result=40 15:31:15 Config A/D Result=40 15:31:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:15 Get A/D filter: -9.255963e+061 result=40 15:31:15 Get A/D value=-858993460 result=40 15:31:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:15 Parameters OK 15:31:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:15 Set A/D data flow result=40 15:31:15 Set A/D channel type result=40 15:31:15 Set A/D encoding result=40 15:31:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:15 Set channel filter=0.000000e+000 result=40 15:31:15 Config A/D Result=40 15:31:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:15 Get A/D filter: -9.255963e+061 result=40 15:31:15 Get A/D value=-858993460 result=40 15:31:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:15 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:15 Aux= 15:31:15 Message to Camera, serial 13504 queued 15:31:46 Received message from Master: op=PointingHead serial=13511 15:31:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:31:46 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:31:46 Point started: ret=0 15:31:46 point_skyscan result=0 15:31:47 Check angles 15:31:47 SkyScan query 15:31:47 SkyScan query done: ret=0 az=134.805<-8987 ze=36.435<-9571 Statuses=0009 0009 15:31:47 Msec=0 True Az=134.805 Ze=36.435 Az status=0009 Ze status=0009 15:31:48 Check angles 15:31:48 SkyScan query 15:31:48 SkyScan query done: ret=0 az=117.255<-7817 ze=15.495<-10967 Statuses=0009 0009 15:31:48 Msec=750 True Az=117.255 Ze=15.495 Az status=0009 Ze status=0009 15:31:48 Check angles 15:31:48 SkyScan query 15:31:49 SkyScan query done: ret=0 az=99.525<-6635 ze=-5.895<-12393 Statuses=0009 0009 15:31:49 Msec=1500 True Az=99.525 Ze=-5.895 Az status=0009 Ze status=0009 15:31:49 Check angles 15:31:49 SkyScan query 15:31:50 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.85<-13790 Statuses=0009 0009 15:31:50 Msec=2250 True Az=82.035 Ze=-26.85 Az status=0009 Ze status=0009 15:31:50 Check angles 15:31:50 SkyScan query 15:31:50 SkyScan query done: ret=0 az=64.485<-4299 ze=-38.58<-14572 Statuses=0009 0008 15:31:50 Msec=3000 True Az=64.485 Ze=-38.58 Az status=0009 Ze status=0008 15:31:51 Check angles 15:31:51 SkyScan query 15:31:51 SkyScan query done: ret=0 az=47.07<-3138 ze=-38.52<-14568 Statuses=0009 0008 15:31:51 Msec=3750 True Az=47.07 Ze=-38.52 Az status=0009 Ze status=0008 15:31:51 Check angles 15:31:51 SkyScan query 15:31:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:31:52 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:31:52 Message to Master queued w/err=0: serial=13511 error=0 15:31:57 Received message from Master: op=Filter serial=13512 15:31:57 Color wheel filter change from 0 to 0 15:31:57 FLIGetFilterPos err=0 currentPosition=0 15:31:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:31:57 Filter is already there-color wheel unchanged 15:31:57 Received message from Master: op=Shutter serial=13513 15:31:57 Shutter LASER close 15:31:57 Received message from Camera: op=State serial=13515 15:31:57 GetSingleValue result=40 Value=cccccccc 15:31:57 SkyScan query 15:31:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:31:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:58 Parameters OK 15:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:58 Set A/D data flow result=40 15:31:58 Set A/D channel type result=40 15:31:58 Set A/D encoding result=40 15:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:58 Set channel filter=0.000000e+000 result=40 15:31:58 Config A/D Result=40 15:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:58 Get A/D filter: -9.255963e+061 result=40 15:31:58 Get A/D value=-858993460 result=40 15:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:31:58 Parameters OK 15:31:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:31:58 Set A/D data flow result=40 15:31:58 Set A/D channel type result=40 15:31:58 Set A/D encoding result=40 15:31:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:31:58 Set channel filter=0.000000e+000 result=40 15:31:58 Config A/D Result=40 15:31:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:31:58 Get A/D filter: -9.255963e+061 result=40 15:31:58 Get A/D value=-858993460 result=40 15:31:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:31:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:31:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:31:58 Aux= 15:31:58 Message to Camera, serial 13515 queued [UTC 2018-12-4 15:32:09] 15:32:29 Received message from Master: op=PointingHead serial=13522 15:32:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:32:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:32:29 Point started: ret=0 15:32:29 point_skyscan result=0 15:32:30 Check angles 15:32:30 SkyScan query 15:32:30 SkyScan query done: ret=0 az=64.035<-4269 ze=-68.475<-16565 Statuses=0009 0009 15:32:30 Msec=0 True Az=64.035 Ze=-68.475 Az status=0009 Ze status=0009 15:32:30 Check angles 15:32:30 SkyScan query 15:32:31 SkyScan query done: ret=0 az=82.05<-5470 ze=-89.865<-17991 Statuses=0009 0009 15:32:31 Msec=750 True Az=82.05 Ze=-89.865 Az status=0009 Ze status=0009 15:32:31 Check angles 15:32:31 SkyScan query 15:32:32 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.82<-19388 Statuses=0009 0009 15:32:32 Msec=1500 True Az=99.585 Ze=-110.82 Az status=0009 Ze status=0009 15:32:32 Check angles 15:32:32 SkyScan query 15:32:32 SkyScan query done: ret=0 az=117.03<-7802 ze=-131.76<-20784 Statuses=0009 0009 15:32:32 Msec=2250 True Az=117.03 Ze=-131.76 Az status=0009 Ze status=0009 15:32:33 Check angles 15:32:33 SkyScan query 15:32:33 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 15:32:33 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 15:32:33 Check angles 15:32:33 SkyScan query 15:32:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:32:34 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:32:34 Message to Master queued w/err=0: serial=13522 error=0 15:32:39 Received message from Master: op=Filter serial=13523 15:32:39 Color wheel filter change from 0 to 0 15:32:39 FLIGetFilterPos err=0 currentPosition=0 15:32:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:32:39 Filter is already there-color wheel unchanged 15:32:39 Received message from Master: op=Shutter serial=13524 15:32:39 Shutter LASER close 15:32:39 Received message from Camera: op=State serial=13526 15:32:39 GetSingleValue result=40 Value=cccccccc 15:32:39 SkyScan query 15:32:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:32:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:40 Parameters OK 15:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:40 Set A/D data flow result=40 15:32:40 Set A/D channel type result=40 15:32:40 Set A/D encoding result=40 15:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:40 Set channel filter=0.000000e+000 result=40 15:32:40 Config A/D Result=40 15:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:40 Get A/D filter: -9.255963e+061 result=40 15:32:40 Get A/D value=-858993460 result=40 15:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:32:40 Parameters OK 15:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:32:40 Set A/D data flow result=40 15:32:40 Set A/D channel type result=40 15:32:40 Set A/D encoding result=40 15:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:32:40 Set channel filter=0.000000e+000 result=40 15:32:40 Config A/D Result=40 15:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:32:40 Get A/D filter: -9.255963e+061 result=40 15:32:40 Get A/D value=-858993460 result=40 15:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:32:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:32:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:32:40 Aux= 15:32:40 Message to Camera, serial 13526 queued 15:33:11 Received message from Master: op=PointingHead serial=13533 15:33:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:33:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:33:11 Point started: ret=0 15:33:11 point_skyscan result=0 15:33:12 Check angles 15:33:12 SkyScan query 15:33:12 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.21<-23414 Statuses=0009 0009 15:33:12 Msec=0 True Az=113.01 Ze=-171.21 Az status=0009 Ze status=0009 15:33:13 Check angles 15:33:13 SkyScan query 15:33:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:33:13 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:33:13 Message to Master queued w/err=0: serial=13533 error=0 15:33:18 Received message from Master: op=Filter serial=13534 15:33:18 Color wheel filter change from 0 to 0 15:33:18 FLIGetFilterPos err=0 currentPosition=0 15:33:18 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:18 Filter is already there-color wheel unchanged 15:33:18 Received message from Master: op=Shutter serial=13535 15:33:18 Shutter LASER open 15:33:19 Received message from Camera: op=State serial=13537 15:33:19 GetSingleValue result=40 Value=cccccccc 15:33:19 SkyScan query 15:33:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:33:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:19 Parameters OK 15:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:19 Set A/D data flow result=40 15:33:19 Set A/D channel type result=40 15:33:19 Set A/D encoding result=40 15:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:19 Set channel filter=0.000000e+000 result=40 15:33:19 Config A/D Result=40 15:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:19 Get A/D filter: -9.255963e+061 result=40 15:33:19 Get A/D value=-858993460 result=40 15:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:19 Parameters OK 15:33:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:19 Set A/D data flow result=40 15:33:19 Set A/D channel type result=40 15:33:19 Set A/D encoding result=40 15:33:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:19 Set channel filter=0.000000e+000 result=40 15:33:19 Config A/D Result=40 15:33:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:19 Get A/D filter: -9.255963e+061 result=40 15:33:19 Get A/D value=-858993460 result=40 15:33:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:19 Aux= 15:33:19 Message to Camera, serial 13537 queued 15:33:22 Received message from Master: op=Shutter serial=13541 15:33:22 Shutter LASER close 15:33:22 Received message from Master: op=PointingHead serial=13545 15:33:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:33:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:33:22 Point started: ret=0 15:33:22 point_skyscan result=0 15:33:23 Check angles 15:33:23 SkyScan query 15:33:24 SkyScan query done: ret=0 az=135.735<-9049 ze=-143.475<-21565 Statuses=0009 0009 15:33:24 Msec=0 True Az=135.735 Ze=-143.475 Az status=0009 Ze status=0009 15:33:24 Check angles 15:33:24 SkyScan query 15:33:25 SkyScan query done: ret=0 az=153.24<-10216 ze=-122.505<-20167 Statuses=0009 0009 15:33:25 Msec=750 True Az=153.24 Ze=-122.505 Az status=0009 Ze status=0009 15:33:25 Check angles 15:33:25 SkyScan query 15:33:25 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.565<-18771 Statuses=0009 0009 15:33:25 Msec=1500 True Az=170.7 Ze=-101.565 Az status=0009 Ze status=0009 15:33:25 Check angles 15:33:25 SkyScan query 15:33:26 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.58<-17372 Statuses=0008 0009 15:33:26 Msec=2250 True Az=176.025 Ze=-80.58 Az status=0008 Ze status=0009 15:33:26 Check angles 15:33:26 SkyScan query 15:33:27 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.655<-15977 Statuses=0008 0009 15:33:27 Msec=3000 True Az=176.01 Ze=-59.655 Az status=0008 Ze status=0009 15:33:27 Check angles 15:33:27 SkyScan query 15:33:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:33:28 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:33:28 Message to Master queued w/err=0: serial=13545 error=0 15:33:33 Received message from Master: op=Filter serial=13546 15:33:33 Color wheel filter change from 0 to 0 15:33:33 FLIGetFilterPos err=0 currentPosition=0 15:33:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:33:33 Filter is already there-color wheel unchanged 15:33:33 Received message from Master: op=Shutter serial=13547 15:33:33 Shutter LASER close 15:33:33 Received message from Camera: op=State serial=13549 15:33:33 GetSingleValue result=40 Value=cccccccc 15:33:33 SkyScan query 15:33:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:33:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:33 Parameters OK 15:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:33 Set A/D data flow result=40 15:33:33 Set A/D channel type result=40 15:33:33 Set A/D encoding result=40 15:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:33 Set channel filter=0.000000e+000 result=40 15:33:33 Config A/D Result=40 15:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:33 Get A/D filter: -9.255963e+061 result=40 15:33:33 Get A/D value=-858993460 result=40 15:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:33:33 Parameters OK 15:33:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:33:33 Set A/D data flow result=40 15:33:33 Set A/D channel type result=40 15:33:33 Set A/D encoding result=40 15:33:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:33:33 Set channel filter=0.000000e+000 result=40 15:33:33 Config A/D Result=40 15:33:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:33:33 Get A/D filter: -9.255963e+061 result=40 15:33:33 Get A/D value=-858993460 result=40 15:33:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:33:33 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:33:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:33:33 Aux= 15:33:33 Message to Camera, serial 13549 queued 15:34:04 Received message from Master: op=PointingHead serial=13556 15:34:04 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:34:04 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:34:05 Point started: ret=0 15:34:05 point_skyscan result=0 15:34:05 Check angles 15:34:05 SkyScan query 15:34:06 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.035<-13469 Statuses=0009 0009 15:34:06 Msec=0 True Az=153.225 Ze=-22.035 Az status=0009 Ze status=0009 15:34:06 Check angles 15:34:06 SkyScan query 15:34:07 SkyScan query done: ret=0 az=135.81<-9054 ze=-1.065<-12071 Statuses=0009 0009 15:34:07 Msec=750 True Az=135.81 Ze=-1.065 Az status=0009 Ze status=0009 15:34:07 Check angles 15:34:07 SkyScan query 15:34:08 SkyScan query done: ret=0 az=118.275<-7885 ze=19.92<-10672 Statuses=0009 0009 15:34:08 Msec=1500 True Az=118.275 Ze=19.92 Az status=0009 Ze status=0009 15:34:08 Check angles 15:34:08 SkyScan query 15:34:08 SkyScan query done: ret=0 az=100.83<-6722 ze=40.83<-9278 Statuses=0009 0009 15:34:08 Msec=2250 True Az=100.83 Ze=40.83 Az status=0009 Ze status=0009 15:34:08 Check angles 15:34:08 SkyScan query 15:34:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:34:09 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:34:09 Check angles 15:34:09 SkyScan query 15:34:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:34:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:34:10 Message to Master queued w/err=0: serial=13556 error=0 15:34:15 Received message from Master: op=Filter serial=13557 15:34:15 Color wheel filter change from 0 to 0 15:34:15 FLIGetFilterPos err=0 currentPosition=0 15:34:15 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:15 Filter is already there-color wheel unchanged 15:34:15 Received message from Master: op=Shutter serial=13558 15:34:15 Shutter LASER close 15:34:15 Received message from Camera: op=State serial=13560 15:34:15 GetSingleValue result=40 Value=cccccccc 15:34:15 SkyScan query 15:34:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:34:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:16 Parameters OK 15:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:16 Set A/D data flow result=40 15:34:16 Set A/D channel type result=40 15:34:16 Set A/D encoding result=40 15:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:16 Set channel filter=0.000000e+000 result=40 15:34:16 Config A/D Result=40 15:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:16 Get A/D filter: -9.255963e+061 result=40 15:34:16 Get A/D value=-858993460 result=40 15:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:16 Parameters OK 15:34:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:16 Set A/D data flow result=40 15:34:16 Set A/D channel type result=40 15:34:16 Set A/D encoding result=40 15:34:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:16 Set channel filter=0.000000e+000 result=40 15:34:16 Config A/D Result=40 15:34:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:16 Get A/D filter: -9.255963e+061 result=40 15:34:16 Get A/D value=-858993460 result=40 15:34:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:16 Aux= 15:34:16 Message to Camera, serial 13560 queued 15:34:46 Received message from Master: op=PointingHead serial=13567 15:34:46 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:34:46 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:34:47 Point started: ret=0 15:34:47 point_skyscan result=0 15:34:48 Check angles 15:34:48 SkyScan query 15:34:48 SkyScan query done: ret=0 az=108.99<-7266 ze=38.49<-9434 Statuses=0009 0008 15:34:48 Msec=0 True Az=108.99 Ze=38.49 Az status=0009 Ze status=0008 15:34:48 Check angles 15:34:48 SkyScan query 15:34:49 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 15:34:49 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 15:34:49 Check angles 15:34:49 SkyScan query 15:34:50 SkyScan query done: ret=0 az=144.105<-9607 ze=38.505<-9433 Statuses=0009 0008 15:34:50 Msec=1500 True Az=144.105 Ze=38.505 Az status=0009 Ze status=0008 15:34:50 Check angles 15:34:50 SkyScan query 15:34:50 SkyScan query done: ret=0 az=161.385<-10759 ze=38.505<-9433 Statuses=0009 0008 15:34:50 Msec=2250 True Az=161.385 Ze=38.505 Az status=0009 Ze status=0008 15:34:51 Check angles 15:34:51 SkyScan query 15:34:51 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 15:34:51 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 15:34:51 Check angles 15:34:51 SkyScan query 15:34:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:34:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:34:52 Message to Master queued w/err=0: serial=13567 error=0 15:34:57 Received message from Master: op=Filter serial=13568 15:34:57 Color wheel filter change from 0 to 0 15:34:57 FLIGetFilterPos err=0 currentPosition=0 15:34:57 FLIGetStepsRemaining err=0 RemainingSteps=0 15:34:57 Filter is already there-color wheel unchanged 15:34:57 Received message from Master: op=Shutter serial=13569 15:34:57 Shutter LASER close 15:34:57 Received message from Camera: op=State serial=13571 15:34:57 GetSingleValue result=40 Value=cccccccc 15:34:57 SkyScan query 15:34:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:34:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:58 Parameters OK 15:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:58 Set A/D data flow result=40 15:34:58 Set A/D channel type result=40 15:34:58 Set A/D encoding result=40 15:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:58 Set channel filter=0.000000e+000 result=40 15:34:58 Config A/D Result=40 15:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:58 Get A/D filter: -9.255963e+061 result=40 15:34:58 Get A/D value=-858993460 result=40 15:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:34:58 Parameters OK 15:34:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:34:58 Set A/D data flow result=40 15:34:58 Set A/D channel type result=40 15:34:58 Set A/D encoding result=40 15:34:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:34:58 Set channel filter=0.000000e+000 result=40 15:34:58 Config A/D Result=40 15:34:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:34:58 Get A/D filter: -9.255963e+061 result=40 15:34:58 Get A/D value=-858993460 result=40 15:34:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:34:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:34:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:34:58 Aux= 15:34:58 Message to Camera, serial 13571 queued 15:35:28 Received message from Master: op=PointingHead serial=13578 15:35:28 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:35:28 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:35:29 Point started: ret=0 15:35:29 point_skyscan result=0 15:35:30 Check angles 15:35:30 SkyScan query 15:35:30 SkyScan query done: ret=0 az=152.79<-10186 ze=8.565<-11429 Statuses=0009 0009 15:35:30 Msec=0 True Az=152.79 Ze=8.565 Az status=0009 Ze status=0009 15:35:30 Check angles 15:35:30 SkyScan query 15:35:31 SkyScan query done: ret=0 az=135.045<-9003 ze=-12.84<-12856 Statuses=0009 0009 15:35:31 Msec=750 True Az=135.045 Ze=-12.84 Az status=0009 Ze status=0009 15:35:31 Check angles 15:35:31 SkyScan query 15:35:32 SkyScan query done: ret=0 az=117.525<-7835 ze=-33.765<-14251 Statuses=0009 0009 15:35:32 Msec=1500 True Az=117.525 Ze=-33.765 Az status=0009 Ze status=0009 15:35:32 Check angles 15:35:32 SkyScan query 15:35:32 SkyScan query done: ret=0 az=100.125<-6675 ze=-51.555<-15437 Statuses=0009 0009 15:35:32 Msec=2250 True Az=100.125 Ze=-51.555 Az status=0009 Ze status=0009 15:35:33 Check angles 15:35:33 SkyScan query 15:35:33 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 15:35:33 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 15:35:33 Check angles 15:35:33 SkyScan query 15:35:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:35:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:35:34 Message to Master queued w/err=0: serial=13578 error=0 15:35:39 Received message from Master: op=Filter serial=13579 15:35:39 Color wheel filter change from 0 to 0 15:35:39 FLIGetFilterPos err=0 currentPosition=0 15:35:39 FLIGetStepsRemaining err=0 RemainingSteps=0 15:35:39 Filter is already there-color wheel unchanged 15:35:39 Received message from Master: op=Shutter serial=13580 15:35:39 Shutter LASER close 15:35:39 Received message from Camera: op=State serial=13582 15:35:39 GetSingleValue result=40 Value=cccccccc 15:35:39 SkyScan query 15:35:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:35:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:40 Parameters OK 15:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:40 Set A/D data flow result=40 15:35:40 Set A/D channel type result=40 15:35:40 Set A/D encoding result=40 15:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:40 Set channel filter=0.000000e+000 result=40 15:35:40 Config A/D Result=40 15:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:40 Get A/D filter: -9.255963e+061 result=40 15:35:40 Get A/D value=-858993460 result=40 15:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:35:40 Parameters OK 15:35:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:35:40 Set A/D data flow result=40 15:35:40 Set A/D channel type result=40 15:35:40 Set A/D encoding result=40 15:35:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:35:40 Set channel filter=0.000000e+000 result=40 15:35:40 Config A/D Result=40 15:35:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:35:40 Get A/D filter: -9.255963e+061 result=40 15:35:40 Get A/D value=-858993460 result=40 15:35:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:35:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:35:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:35:40 Aux= 15:35:40 Message to Camera, serial 13582 queued 15:36:11 Received message from Master: op=PointingHead serial=13589 15:36:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:36:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:36:11 Point started: ret=0 15:36:11 point_skyscan result=0 15:36:12 Check angles 15:36:12 SkyScan query 15:36:12 SkyScan query done: ret=0 az=108.72<-7248 ze=-81.015<-17401 Statuses=0009 0009 15:36:12 Msec=0 True Az=108.72 Ze=-81.015 Az status=0009 Ze status=0009 15:36:12 Check angles 15:36:12 SkyScan query 15:36:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 15:36:13 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 15:36:13 Check angles 15:36:13 SkyScan query 15:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.33<-20222 Statuses=0008 0009 15:36:14 Msec=1500 True Az=112.995 Ze=-123.33 Az status=0008 Ze status=0009 15:36:14 Check angles 15:36:14 SkyScan query 15:36:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 15:36:14 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 15:36:15 Check angles 15:36:15 SkyScan query 15:36:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 15:36:15 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 15:36:15 Check angles 15:36:15 SkyScan query 15:36:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:36:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:36:16 Message to Master queued w/err=0: serial=13589 error=0 15:36:21 Received message from Master: op=Filter serial=13590 15:36:21 Color wheel filter change from 0 to 0 15:36:21 FLIGetFilterPos err=0 currentPosition=0 15:36:21 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:21 Filter is already there-color wheel unchanged 15:36:21 Received message from Master: op=Shutter serial=13591 15:36:21 Shutter LASER open 15:36:21 Received message from Camera: op=State serial=13593 15:36:21 GetSingleValue result=40 Value=cccccccc 15:36:21 SkyScan query 15:36:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:36:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:22 Parameters OK 15:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:22 Set A/D data flow result=40 15:36:22 Set A/D channel type result=40 15:36:22 Set A/D encoding result=40 15:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:22 Set channel filter=0.000000e+000 result=40 15:36:22 Config A/D Result=40 15:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:22 Get A/D filter: -9.255963e+061 result=40 15:36:22 Get A/D value=-858993460 result=40 15:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:22 Parameters OK 15:36:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:22 Set A/D data flow result=40 15:36:22 Set A/D channel type result=40 15:36:22 Set A/D encoding result=40 15:36:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:22 Set channel filter=0.000000e+000 result=40 15:36:22 Config A/D Result=40 15:36:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:22 Get A/D filter: -9.255963e+061 result=40 15:36:22 Get A/D value=-858993460 result=40 15:36:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:22 Aux= 15:36:22 Message to Camera, serial 13593 queued 15:36:24 Received message from Master: op=Shutter serial=13597 15:36:24 Shutter LASER close 15:36:25 Received message from Master: op=PointingHead serial=13601 15:36:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:36:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:36:25 Point started: ret=0 15:36:25 point_skyscan result=0 15:36:26 Check angles 15:36:26 SkyScan query 15:36:27 SkyScan query done: ret=0 az=89.85<-5990 ze=157.155<-1523 Statuses=0009 0009 15:36:27 Msec=0 True Az=89.85 Ze=157.155 Az status=0009 Ze status=0009 15:36:27 Check angles 15:36:27 SkyScan query 15:36:27 SkyScan query done: ret=0 az=71.97<-4798 ze=135.735<-2951 Statuses=0009 0009 15:36:27 Msec=750 True Az=71.97 Ze=135.735 Az status=0009 Ze status=0009 15:36:27 Check angles 15:36:27 SkyScan query 15:36:28 SkyScan query done: ret=0 az=54.72<-3648 ze=114.81<-4346 Statuses=0009 0009 15:36:28 Msec=1500 True Az=54.72 Ze=114.81 Az status=0009 Ze status=0009 15:36:28 Check angles 15:36:28 SkyScan query 15:36:29 SkyScan query done: ret=0 az=40.89<-2726 ze=93.825<-5745 Statuses=0009 0009 15:36:29 Msec=2250 True Az=40.89 Ze=93.825 Az status=0009 Ze status=0009 15:36:29 Check angles 15:36:29 SkyScan query 15:36:30 SkyScan query done: ret=0 az=40.995<-2733 ze=72.87<-7142 Statuses=0008 0009 15:36:30 Msec=3000 True Az=40.995 Ze=72.87 Az status=0008 Ze status=0009 15:36:30 Check angles 15:36:30 SkyScan query 15:36:30 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 15:36:30 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 15:36:30 Check angles 15:36:30 SkyScan query 15:36:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:36:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:36:31 Message to Master queued w/err=0: serial=13601 error=0 15:36:36 Received message from Master: op=Filter serial=13602 15:36:36 Color wheel filter change from 0 to 0 15:36:36 FLIGetFilterPos err=0 currentPosition=0 15:36:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:36:36 Filter is already there-color wheel unchanged 15:36:36 Received message from Master: op=Shutter serial=13603 15:36:36 Shutter LASER close 15:36:36 Received message from Camera: op=State serial=13605 15:36:36 GetSingleValue result=40 Value=cccccccc 15:36:36 SkyScan query 15:36:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:36:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:37 Parameters OK 15:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:37 Set A/D data flow result=40 15:36:37 Set A/D channel type result=40 15:36:37 Set A/D encoding result=40 15:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:37 Set channel filter=0.000000e+000 result=40 15:36:37 Config A/D Result=40 15:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:37 Get A/D filter: -9.255963e+061 result=40 15:36:37 Get A/D value=-858993460 result=40 15:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:36:37 Parameters OK 15:36:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:36:37 Set A/D data flow result=40 15:36:37 Set A/D channel type result=40 15:36:37 Set A/D encoding result=40 15:36:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:36:37 Set channel filter=0.000000e+000 result=40 15:36:37 Config A/D Result=40 15:36:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:36:37 Get A/D filter: -9.255963e+061 result=40 15:36:37 Get A/D value=-858993460 result=40 15:36:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:36:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:36:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:36:37 Aux= 15:36:37 Message to Camera, serial 13605 queued 15:37:08 Received message from Master: op=PointingHead serial=13612 15:37:08 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:37:08 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:37:08 Point started: ret=0 15:37:08 point_skyscan result=0 15:37:09 Check angles 15:37:09 SkyScan query 15:37:09 SkyScan query done: ret=0 az=63.735<-4249 ze=66.555<-7563 Statuses=0009 0008 15:37:09 Msec=0 True Az=63.735 Ze=66.555 Az status=0009 Ze status=0008 15:37:10 Check angles 15:37:10 SkyScan query 15:37:10 SkyScan query done: ret=0 az=81.105<-5407 ze=66.495<-7567 Statuses=0009 0008 15:37:10 Msec=750 True Az=81.105 Ze=66.495 Az status=0009 Ze status=0008 15:37:10 Check angles 15:37:10 SkyScan query 15:37:11 SkyScan query done: ret=0 az=99.165<-6611 ze=66.495<-7567 Statuses=0009 0008 15:37:11 Msec=1500 True Az=99.165 Ze=66.495 Az status=0009 Ze status=0008 15:37:11 Check angles 15:37:11 SkyScan query 15:37:12 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 15:37:12 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 15:37:12 Check angles 15:37:12 SkyScan query 15:37:13 SkyScan query done: ret=0 az=134.49<-8966 ze=66.495<-7567 Statuses=0009 0008 15:37:13 Msec=3000 True Az=134.49 Ze=66.495 Az status=0009 Ze status=0008 15:37:13 Check angles 15:37:13 SkyScan query 15:37:13 SkyScan query done: ret=0 az=151.725<-10115 ze=66.495<-7567 Statuses=0009 0008 15:37:13 Msec=3750 True Az=151.725 Ze=66.495 Az status=0009 Ze status=0008 15:37:13 Check angles 15:37:13 SkyScan query 15:37:14 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:37:14 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:37:14 Message to Master queued w/err=0: serial=13612 error=0 15:37:19 Received message from Master: op=Filter serial=13613 15:37:19 Color wheel filter change from 0 to 0 15:37:19 FLIGetFilterPos err=0 currentPosition=0 15:37:19 FLIGetStepsRemaining err=0 RemainingSteps=0 15:37:19 Filter is already there-color wheel unchanged 15:37:19 Received message from Master: op=Shutter serial=13614 15:37:19 Shutter LASER close 15:37:19 Received message from Camera: op=State serial=13616 15:37:19 GetSingleValue result=40 Value=cccccccc 15:37:19 SkyScan query 15:37:20 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:37:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:20 Parameters OK 15:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:20 Set A/D data flow result=40 15:37:20 Set A/D channel type result=40 15:37:20 Set A/D encoding result=40 15:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:20 Set channel filter=0.000000e+000 result=40 15:37:20 Config A/D Result=40 15:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:20 Get A/D filter: -9.255963e+061 result=40 15:37:20 Get A/D value=-858993460 result=40 15:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:37:20 Parameters OK 15:37:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:37:20 Set A/D data flow result=40 15:37:20 Set A/D channel type result=40 15:37:20 Set A/D encoding result=40 15:37:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:37:20 Set channel filter=0.000000e+000 result=40 15:37:20 Config A/D Result=40 15:37:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:37:20 Get A/D filter: -9.255963e+061 result=40 15:37:20 Get A/D value=-858993460 result=40 15:37:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:37:20 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:37:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:37:20 Aux= 15:37:20 Message to Camera, serial 13616 queued 15:37:51 Received message from Master: op=PointingHead serial=13623 15:37:51 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:37:51 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:37:51 Point started: ret=0 15:37:51 point_skyscan result=0 15:37:52 Check angles 15:37:52 SkyScan query 15:37:52 SkyScan query done: ret=0 az=135.255<-9017 ze=36.975<-9535 Statuses=0009 0009 15:37:52 Msec=0 True Az=135.255 Ze=36.975 Az status=0009 Ze status=0009 15:37:53 Check angles 15:37:53 SkyScan query 15:37:53 SkyScan query done: ret=0 az=117.705<-7847 ze=15.99<-10934 Statuses=0009 0009 15:37:53 Msec=750 True Az=117.705 Ze=15.99 Az status=0009 Ze status=0009 15:37:53 Check angles 15:37:53 SkyScan query 15:37:54 SkyScan query done: ret=0 az=100.335<-6689 ze=-4.935<-12329 Statuses=0009 0009 15:37:54 Msec=1500 True Az=100.335 Ze=-4.935 Az status=0009 Ze status=0009 15:37:54 Check angles 15:37:54 SkyScan query 15:37:55 SkyScan query done: ret=0 az=82.845<-5523 ze=-25.92<-13728 Statuses=0009 0009 15:37:55 Msec=2250 True Az=82.845 Ze=-25.92 Az status=0009 Ze status=0009 15:37:55 Check angles 15:37:55 SkyScan query 15:37:55 SkyScan query done: ret=0 az=65.4<-4360 ze=-38.565<-14571 Statuses=0009 0008 15:37:55 Msec=3000 True Az=65.4 Ze=-38.565 Az status=0009 Ze status=0008 15:37:56 Check angles 15:37:56 SkyScan query 15:37:56 SkyScan query done: ret=0 az=47.955<-3197 ze=-38.535<-14569 Statuses=0009 0008 15:37:56 Msec=3750 True Az=47.955 Ze=-38.535 Az status=0009 Ze status=0008 15:37:56 Check angles 15:37:56 SkyScan query 15:37:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:37:57 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:37:57 Message to Master queued w/err=0: serial=13623 error=0 15:38:02 Received message from Master: op=Filter serial=13624 15:38:02 Color wheel filter change from 0 to 0 15:38:02 FLIGetFilterPos err=0 currentPosition=0 15:38:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:02 Filter is already there-color wheel unchanged 15:38:02 Received message from Master: op=Shutter serial=13625 15:38:02 Shutter LASER close 15:38:02 Received message from Camera: op=State serial=13627 15:38:02 GetSingleValue result=40 Value=cccccccc 15:38:02 SkyScan query 15:38:03 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:38:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:03 Parameters OK 15:38:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:03 Set A/D data flow result=40 15:38:03 Set A/D channel type result=40 15:38:03 Set A/D encoding result=40 15:38:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:03 Set channel filter=0.000000e+000 result=40 15:38:03 Config A/D Result=40 15:38:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:03 Get A/D filter: -9.255963e+061 result=40 15:38:03 Get A/D value=-858993460 result=40 15:38:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:03 Parameters OK 15:38:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:03 Set A/D data flow result=40 15:38:03 Set A/D channel type result=40 15:38:03 Set A/D encoding result=40 15:38:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:03 Set channel filter=0.000000e+000 result=40 15:38:03 Config A/D Result=40 15:38:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:03 Get A/D filter: -9.255963e+061 result=40 15:38:03 Get A/D value=-858993460 result=40 15:38:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:03 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:03 Aux= 15:38:03 Message to Camera, serial 13627 queued 15:38:34 Received message from Master: op=PointingHead serial=13634 15:38:34 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:38:34 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:38:34 Point started: ret=0 15:38:34 point_skyscan result=0 15:38:35 Check angles 15:38:35 SkyScan query 15:38:35 SkyScan query done: ret=0 az=64.26<-4284 ze=-68.79<-16586 Statuses=0009 0009 15:38:35 Msec=0 True Az=64.26 Ze=-68.79 Az status=0009 Ze status=0009 15:38:35 Check angles 15:38:35 SkyScan query 15:38:36 SkyScan query done: ret=0 az=82.23<-5482 ze=-90.18<-18012 Statuses=0009 0009 15:38:36 Msec=750 True Az=82.23 Ze=-90.18 Az status=0009 Ze status=0009 15:38:36 Check angles 15:38:36 SkyScan query 15:38:37 SkyScan query done: ret=0 az=100.155<-6677 ze=-111.57<-19438 Statuses=0009 0009 15:38:37 Msec=1500 True Az=100.155 Ze=-111.57 Az status=0009 Ze status=0009 15:38:37 Check angles 15:38:37 SkyScan query 15:38:38 SkyScan query done: ret=0 az=117.615<-7841 ze=-132.51<-20834 Statuses=0009 0009 15:38:38 Msec=2250 True Az=117.615 Ze=-132.51 Az status=0009 Ze status=0009 15:38:38 Check angles 15:38:38 SkyScan query 15:38:38 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 15:38:38 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 15:38:38 Check angles 15:38:38 SkyScan query 15:38:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 15:38:39 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 15:38:39 Message to Master queued w/err=0: serial=13634 error=0 15:38:44 Received message from Master: op=Filter serial=13635 15:38:44 Color wheel filter change from 0 to 0 15:38:44 FLIGetFilterPos err=0 currentPosition=0 15:38:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:38:44 Filter is already there-color wheel unchanged 15:38:44 Received message from Master: op=Shutter serial=13636 15:38:44 Shutter LASER close 15:38:44 Received message from Camera: op=State serial=13638 15:38:44 GetSingleValue result=40 Value=cccccccc 15:38:44 SkyScan query 15:38:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:38:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:45 Parameters OK 15:38:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:45 Set A/D data flow result=40 15:38:45 Set A/D channel type result=40 15:38:45 Set A/D encoding result=40 15:38:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:45 Set channel filter=0.000000e+000 result=40 15:38:45 Config A/D Result=40 15:38:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:45 Get A/D filter: -9.255963e+061 result=40 15:38:45 Get A/D value=-858993460 result=40 15:38:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:38:45 Parameters OK 15:38:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:38:45 Set A/D data flow result=40 15:38:45 Set A/D channel type result=40 15:38:45 Set A/D encoding result=40 15:38:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:38:45 Set channel filter=0.000000e+000 result=40 15:38:45 Config A/D Result=40 15:38:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:38:45 Get A/D filter: -9.255963e+061 result=40 15:38:45 Get A/D value=-858993460 result=40 15:38:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:38:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:38:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:38:45 Aux= 15:38:45 Message to Camera, serial 13638 queued 15:39:16 Received message from Master: op=PointingHead serial=13645 15:39:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:39:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:39:16 Point started: ret=0 15:39:16 point_skyscan result=0 15:39:17 Check angles 15:39:17 SkyScan query 15:39:17 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.015<-23401 Statuses=0009 0009 15:39:17 Msec=0 True Az=113.025 Ze=-171.015 Az status=0009 Ze status=0009 15:39:18 Check angles 15:39:18 SkyScan query 15:39:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:39:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:39:18 Message to Master queued w/err=0: serial=13645 error=0 15:39:23 Received message from Master: op=Filter serial=13646 15:39:23 Color wheel filter change from 0 to 0 15:39:23 FLIGetFilterPos err=0 currentPosition=0 15:39:23 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:23 Filter is already there-color wheel unchanged 15:39:23 Received message from Master: op=Shutter serial=13647 15:39:23 Shutter LASER open 15:39:23 Received message from Camera: op=State serial=13649 15:39:23 GetSingleValue result=40 Value=cccccccc 15:39:23 SkyScan query 15:39:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:39:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:24 Parameters OK 15:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:24 Set A/D data flow result=40 15:39:24 Set A/D channel type result=40 15:39:24 Set A/D encoding result=40 15:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:24 Set channel filter=0.000000e+000 result=40 15:39:24 Config A/D Result=40 15:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:24 Get A/D filter: -9.255963e+061 result=40 15:39:24 Get A/D value=-858993460 result=40 15:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:24 Parameters OK 15:39:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:24 Set A/D data flow result=40 15:39:24 Set A/D channel type result=40 15:39:24 Set A/D encoding result=40 15:39:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:24 Set channel filter=0.000000e+000 result=40 15:39:24 Config A/D Result=40 15:39:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:24 Get A/D filter: -9.255963e+061 result=40 15:39:24 Get A/D value=-858993460 result=40 15:39:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:24 Aux= 15:39:24 Message to Camera, serial 13649 queued 15:39:26 Received message from Master: op=Shutter serial=13653 15:39:26 Shutter LASER close 15:39:27 Received message from Master: op=PointingHead serial=13657 15:39:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:39:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:39:27 Point started: ret=0 15:39:27 point_skyscan result=0 15:39:28 Check angles 15:39:28 SkyScan query 15:39:29 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.905<-21527 Statuses=0009 0009 15:39:29 Msec=0 True Az=136.215 Ze=-142.905 Az status=0009 Ze status=0009 15:39:29 Check angles 15:39:29 SkyScan query 15:39:30 SkyScan query done: ret=0 az=154.095<-10273 ze=-121.53<-20102 Statuses=0009 0009 15:39:30 Msec=750 True Az=154.095 Ze=-121.53 Az status=0009 Ze status=0009 15:39:30 Check angles 15:39:30 SkyScan query 15:39:30 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.56<-18704 Statuses=0009 0009 15:39:30 Msec=1500 True Az=171.51 Ze=-100.56 Az status=0009 Ze status=0009 15:39:30 Check angles 15:39:30 SkyScan query 15:39:31 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.62<-17308 Statuses=0008 0009 15:39:31 Msec=2250 True Az=176.025 Ze=-79.62 Az status=0008 Ze status=0009 15:39:31 Check angles 15:39:31 SkyScan query 15:39:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.185<-15879 Statuses=0008 0009 15:39:32 Msec=3000 True Az=175.995 Ze=-58.185 Az status=0008 Ze status=0009 15:39:32 Check angles 15:39:32 SkyScan query 15:39:33 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:39:33 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:39:33 Message to Master queued w/err=0: serial=13657 error=0 15:39:38 Received message from Master: op=Filter serial=13658 15:39:38 Color wheel filter change from 0 to 0 15:39:38 FLIGetFilterPos err=0 currentPosition=0 15:39:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:39:38 Filter is already there-color wheel unchanged 15:39:38 Received message from Master: op=Shutter serial=13659 15:39:38 Shutter LASER close 15:39:38 Received message from Camera: op=State serial=13661 15:39:38 GetSingleValue result=40 Value=cccccccc 15:39:38 SkyScan query 15:39:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:39:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:38 Parameters OK 15:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:38 Set A/D data flow result=40 15:39:38 Set A/D channel type result=40 15:39:38 Set A/D encoding result=40 15:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:38 Set channel filter=0.000000e+000 result=40 15:39:38 Config A/D Result=40 15:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:38 Get A/D filter: -9.255963e+061 result=40 15:39:38 Get A/D value=-858993460 result=40 15:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:39:38 Parameters OK 15:39:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:39:38 Set A/D data flow result=40 15:39:38 Set A/D channel type result=40 15:39:38 Set A/D encoding result=40 15:39:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:39:38 Set channel filter=0.000000e+000 result=40 15:39:38 Config A/D Result=40 15:39:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:39:38 Get A/D filter: -9.255963e+061 result=40 15:39:38 Get A/D value=-858993460 result=40 15:39:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:39:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:39:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:39:38 Aux= 15:39:38 Message to Camera, serial 13661 queued 15:40:09 Received message from Master: op=PointingHead serial=13668 15:40:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:40:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:40:10 Point started: ret=0 15:40:10 point_skyscan result=0 15:40:10 Check angles 15:40:10 SkyScan query 15:40:11 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.3<-13420 Statuses=0009 0009 15:40:11 Msec=0 True Az=152.655 Ze=-21.3 Az status=0009 Ze status=0009 15:40:11 Check angles 15:40:11 SkyScan query 15:40:12 SkyScan query done: ret=0 az=134.775<-8985 ze=0.105<-11993 Statuses=0009 0009 15:40:12 Msec=750 True Az=134.775 Ze=0.105 Az status=0009 Ze status=0009 15:40:12 Check angles 15:40:12 SkyScan query 15:40:13 SkyScan query done: ret=0 az=117.3<-7820 ze=21.06<-10596 Statuses=0009 0009 15:40:13 Msec=1500 True Az=117.3 Ze=21.06 Az status=0009 Ze status=0009 15:40:13 Check angles 15:40:13 SkyScan query 15:40:13 SkyScan query done: ret=0 az=99.9<-6660 ze=42.03<-9198 Statuses=0009 0009 15:40:13 Msec=2250 True Az=99.9 Ze=42.03 Az status=0009 Ze status=0009 15:40:13 Check angles 15:40:13 SkyScan query 15:40:14 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:40:14 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:40:14 Check angles 15:40:14 SkyScan query 15:40:15 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:40:15 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:40:15 Message to Master queued w/err=0: serial=13668 error=0 15:40:20 Received message from Master: op=Filter serial=13669 15:40:20 Color wheel filter change from 0 to 0 15:40:20 FLIGetFilterPos err=0 currentPosition=0 15:40:20 FLIGetStepsRemaining err=0 RemainingSteps=0 15:40:20 Filter is already there-color wheel unchanged 15:40:20 Received message from Master: op=Shutter serial=13670 15:40:20 Shutter LASER close 15:40:20 Received message from Camera: op=State serial=13672 15:40:20 GetSingleValue result=40 Value=cccccccc 15:40:20 SkyScan query 15:40:21 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:40:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:21 Parameters OK 15:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:21 Set A/D data flow result=40 15:40:21 Set A/D channel type result=40 15:40:21 Set A/D encoding result=40 15:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:21 Set channel filter=0.000000e+000 result=40 15:40:21 Config A/D Result=40 15:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:21 Get A/D filter: -9.255963e+061 result=40 15:40:21 Get A/D value=-858993460 result=40 15:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:40:21 Parameters OK 15:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:40:21 Set A/D data flow result=40 15:40:21 Set A/D channel type result=40 15:40:21 Set A/D encoding result=40 15:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:40:21 Set channel filter=0.000000e+000 result=40 15:40:21 Config A/D Result=40 15:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:40:21 Get A/D filter: -9.255963e+061 result=40 15:40:21 Get A/D value=-858993460 result=40 15:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:40:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:40:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:40:21 Aux= 15:40:21 Message to Camera, serial 13672 queued 15:40:51 Received message from Master: op=PointingHead serial=13679 15:40:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:40:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:40:52 Point started: ret=0 15:40:52 point_skyscan result=0 15:40:53 Check angles 15:40:53 SkyScan query 15:40:53 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 15:40:53 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 15:40:53 Check angles 15:40:53 SkyScan query 15:40:54 SkyScan query done: ret=0 az=126.39<-8426 ze=38.505<-9433 Statuses=0009 0008 15:40:54 Msec=750 True Az=126.39 Ze=38.505 Az status=0009 Ze status=0008 15:40:54 Check angles 15:40:54 SkyScan query 15:40:55 SkyScan query done: ret=0 az=144.225<-9615 ze=38.505<-9433 Statuses=0009 0008 15:40:55 Msec=1500 True Az=144.225 Ze=38.505 Az status=0009 Ze status=0008 15:40:55 Check angles 15:40:55 SkyScan query [UTC 2018-12-4 15:40:55] 15:40:55 SkyScan query done: ret=0 az=161.505<-10767 ze=38.505<-9433 Statuses=0009 0008 15:40:55 Msec=2250 True Az=161.505 Ze=38.505 Az status=0009 Ze status=0008 15:40:56 Check angles 15:40:56 SkyScan query 15:40:56 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 15:40:56 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 15:40:56 Check angles 15:40:56 SkyScan query 15:40:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:40:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:40:57 Message to Master queued w/err=0: serial=13679 error=0 15:41:02 Received message from Master: op=Filter serial=13680 15:41:02 Color wheel filter change from 0 to 0 15:41:02 FLIGetFilterPos err=0 currentPosition=0 15:41:02 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:02 Filter is already there-color wheel unchanged 15:41:02 Received message from Master: op=Shutter serial=13681 15:41:02 Shutter LASER close 15:41:02 Received message from Camera: op=State serial=13683 15:41:02 GetSingleValue result=40 Value=cccccccc 15:41:02 SkyScan query 15:41:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:41:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:03 Parameters OK 15:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:03 Set A/D data flow result=40 15:41:03 Set A/D channel type result=40 15:41:03 Set A/D encoding result=40 15:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:03 Set channel filter=0.000000e+000 result=40 15:41:03 Config A/D Result=40 15:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:03 Get A/D filter: -9.255963e+061 result=40 15:41:03 Get A/D value=-858993460 result=40 15:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:03 Parameters OK 15:41:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:03 Set A/D data flow result=40 15:41:03 Set A/D channel type result=40 15:41:03 Set A/D encoding result=40 15:41:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:03 Set channel filter=0.000000e+000 result=40 15:41:03 Config A/D Result=40 15:41:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:03 Get A/D filter: -9.255963e+061 result=40 15:41:03 Get A/D value=-858993460 result=40 15:41:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:03 Aux= 15:41:03 Message to Camera, serial 13683 queued 15:41:33 Received message from Master: op=PointingHead serial=13690 15:41:34 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:41:34 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:41:34 Point started: ret=0 15:41:34 point_skyscan result=0 15:41:35 Check angles 15:41:35 SkyScan query 15:41:35 SkyScan query done: ret=0 az=152.94<-10196 ze=8.61<-11426 Statuses=0009 0009 15:41:35 Msec=0 True Az=152.94 Ze=8.61 Az status=0009 Ze status=0009 15:41:35 Check angles 15:41:35 SkyScan query 15:41:36 SkyScan query done: ret=0 az=135.48<-9032 ze=-12.33<-12822 Statuses=0009 0009 15:41:36 Msec=750 True Az=135.48 Ze=-12.33 Az status=0009 Ze status=0009 15:41:36 Check angles 15:41:36 SkyScan query 15:41:37 SkyScan query done: ret=0 az=117.84<-7856 ze=-33.285<-14219 Statuses=0009 0009 15:41:37 Msec=1500 True Az=117.84 Ze=-33.285 Az status=0009 Ze status=0009 15:41:37 Check angles 15:41:37 SkyScan query 15:41:37 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 15:41:37 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 15:41:38 Check angles 15:41:38 SkyScan query 15:41:38 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 15:41:38 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 15:41:38 Check angles 15:41:38 SkyScan query 15:41:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:41:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:41:39 Message to Master queued w/err=0: serial=13690 error=0 15:41:44 Received message from Master: op=Filter serial=13691 15:41:44 Color wheel filter change from 0 to 0 15:41:44 FLIGetFilterPos err=0 currentPosition=0 15:41:44 FLIGetStepsRemaining err=0 RemainingSteps=0 15:41:44 Filter is already there-color wheel unchanged 15:41:44 Received message from Master: op=Shutter serial=13692 15:41:44 Shutter LASER close 15:41:44 Received message from Camera: op=State serial=13694 15:41:44 GetSingleValue result=40 Value=cccccccc 15:41:44 SkyScan query 15:41:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:41:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:45 Parameters OK 15:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:45 Set A/D data flow result=40 15:41:45 Set A/D channel type result=40 15:41:45 Set A/D encoding result=40 15:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:45 Set channel filter=0.000000e+000 result=40 15:41:45 Config A/D Result=40 15:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:45 Get A/D filter: -9.255963e+061 result=40 15:41:45 Get A/D value=-858993460 result=40 15:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:41:45 Parameters OK 15:41:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:41:45 Set A/D data flow result=40 15:41:45 Set A/D channel type result=40 15:41:45 Set A/D encoding result=40 15:41:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:41:45 Set channel filter=0.000000e+000 result=40 15:41:45 Config A/D Result=40 15:41:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:41:45 Get A/D filter: -9.255963e+061 result=40 15:41:45 Get A/D value=-858993460 result=40 15:41:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:41:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:41:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:41:45 Aux= 15:41:45 Message to Camera, serial 13694 queued 15:42:16 Received message from Master: op=PointingHead serial=13701 15:42:16 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:42:16 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:42:16 Point started: ret=0 15:42:16 point_skyscan result=0 15:42:17 Check angles 15:42:17 SkyScan query 15:42:17 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.72<-17448 Statuses=0009 0009 15:42:17 Msec=0 True Az=109.38 Ze=-81.72 Az status=0009 Ze status=0009 15:42:17 Check angles 15:42:17 SkyScan query 15:42:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.11<-18874 Statuses=0008 0009 15:42:18 Msec=750 True Az=112.995 Ze=-103.11 Az status=0008 Ze status=0009 15:42:18 Check angles 15:42:18 SkyScan query 15:42:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.065<-20271 Statuses=0008 0009 15:42:19 Msec=1500 True Az=112.995 Ze=-124.065 Az status=0008 Ze status=0009 15:42:19 Check angles 15:42:19 SkyScan query 15:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.005<-21667 Statuses=0008 0009 15:42:20 Msec=2250 True Az=112.995 Ze=-145.005 Az status=0008 Ze status=0009 15:42:20 Check angles 15:42:20 SkyScan query 15:42:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 15:42:20 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 15:42:20 Check angles 15:42:20 SkyScan query 15:42:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:42:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:42:21 Message to Master queued w/err=0: serial=13701 error=0 15:42:26 Received message from Master: op=Filter serial=13702 15:42:26 Color wheel filter change from 0 to 0 15:42:26 FLIGetFilterPos err=0 currentPosition=0 15:42:26 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:26 Filter is already there-color wheel unchanged 15:42:26 Received message from Master: op=Shutter serial=13703 15:42:26 Shutter LASER open 15:42:26 Received message from Camera: op=State serial=13705 15:42:26 GetSingleValue result=40 Value=cccccccc 15:42:26 SkyScan query 15:42:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:42:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:27 Parameters OK 15:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:27 Set A/D data flow result=40 15:42:27 Set A/D channel type result=40 15:42:27 Set A/D encoding result=40 15:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:27 Set channel filter=0.000000e+000 result=40 15:42:27 Config A/D Result=40 15:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:27 Get A/D filter: -9.255963e+061 result=40 15:42:27 Get A/D value=-858993460 result=40 15:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:27 Parameters OK 15:42:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:27 Set A/D data flow result=40 15:42:27 Set A/D channel type result=40 15:42:27 Set A/D encoding result=40 15:42:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:27 Set channel filter=0.000000e+000 result=40 15:42:27 Config A/D Result=40 15:42:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:27 Get A/D filter: -9.255963e+061 result=40 15:42:27 Get A/D value=-858993460 result=40 15:42:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:27 Aux= 15:42:27 Message to Camera, serial 13705 queued 15:42:29 Received message from Master: op=Shutter serial=13709 15:42:29 Shutter LASER close 15:42:30 Received message from Master: op=PointingHead serial=13713 15:42:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:42:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:42:30 Point started: ret=0 15:42:30 point_skyscan result=0 15:42:31 Check angles 15:42:31 SkyScan query 15:42:32 SkyScan query done: ret=0 az=89.46<-5964 ze=156.855<-1543 Statuses=0009 0009 15:42:32 Msec=0 True Az=89.46 Ze=156.855 Az status=0009 Ze status=0009 15:42:32 Check angles 15:42:32 SkyScan query 15:42:32 SkyScan query done: ret=0 az=72<-4800 ze=135.885<-2941 Statuses=0009 0009 15:42:32 Msec=750 True Az=72 Ze=135.885 Az status=0009 Ze status=0009 15:42:32 Check angles 15:42:32 SkyScan query 15:42:33 SkyScan query done: ret=0 az=54.72<-3648 ze=114.93<-4338 Statuses=0009 0009 15:42:33 Msec=1500 True Az=54.72 Ze=114.93 Az status=0009 Ze status=0009 15:42:33 Check angles 15:42:33 SkyScan query 15:42:34 SkyScan query done: ret=0 az=40.875<-2725 ze=93.975<-5735 Statuses=0009 0009 15:42:34 Msec=2250 True Az=40.875 Ze=93.975 Az status=0009 Ze status=0009 15:42:34 Check angles 15:42:34 SkyScan query 15:42:35 SkyScan query done: ret=0 az=40.995<-2733 ze=73.005<-7133 Statuses=0008 0009 15:42:35 Msec=3000 True Az=40.995 Ze=73.005 Az status=0008 Ze status=0009 15:42:35 Check angles 15:42:35 SkyScan query 15:42:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 15:42:35 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 15:42:35 Check angles 15:42:35 SkyScan query 15:42:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:42:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:42:36 Message to Master queued w/err=0: serial=13713 error=0 15:42:41 Received message from Master: op=Filter serial=13714 15:42:41 Color wheel filter change from 0 to 0 15:42:41 FLIGetFilterPos err=0 currentPosition=0 15:42:41 FLIGetStepsRemaining err=0 RemainingSteps=0 15:42:41 Filter is already there-color wheel unchanged 15:42:41 Received message from Master: op=Shutter serial=13715 15:42:41 Shutter LASER close 15:42:41 Received message from Camera: op=State serial=13717 15:42:41 GetSingleValue result=40 Value=cccccccc 15:42:41 SkyScan query 15:42:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:42 Parameters OK 15:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:42 Set A/D data flow result=40 15:42:42 Set A/D channel type result=40 15:42:42 Set A/D encoding result=40 15:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:42 Set channel filter=0.000000e+000 result=40 15:42:42 Config A/D Result=40 15:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:42 Get A/D filter: -9.255963e+061 result=40 15:42:42 Get A/D value=-858993460 result=40 15:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:42:42 Parameters OK 15:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:42:42 Set A/D data flow result=40 15:42:42 Set A/D channel type result=40 15:42:42 Set A/D encoding result=40 15:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:42:42 Set channel filter=0.000000e+000 result=40 15:42:42 Config A/D Result=40 15:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:42:42 Get A/D filter: -9.255963e+061 result=40 15:42:42 Get A/D value=-858993460 result=40 15:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:42:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:42:42 Aux= 15:42:42 Message to Camera, serial 13717 queued 15:43:13 Received message from Master: op=PointingHead serial=13724 15:43:13 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:43:13 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:43:13 Point started: ret=0 15:43:13 point_skyscan result=0 15:43:14 Check angles 15:43:14 SkyScan query 15:43:15 SkyScan query done: ret=0 az=63.84<-4256 ze=66.555<-7563 Statuses=0009 0008 15:43:15 Msec=0 True Az=63.84 Ze=66.555 Az status=0009 Ze status=0008 15:43:15 Check angles 15:43:15 SkyScan query 15:43:15 SkyScan query done: ret=0 az=81.405<-5427 ze=66.495<-7567 Statuses=0009 0008 15:43:15 Msec=750 True Az=81.405 Ze=66.495 Az status=0009 Ze status=0008 15:43:15 Check angles 15:43:15 SkyScan query 15:43:16 SkyScan query done: ret=0 az=99<-6600 ze=66.495<-7567 Statuses=0009 0008 15:43:16 Msec=1500 True Az=99 Ze=66.495 Az status=0009 Ze status=0008 15:43:16 Check angles 15:43:16 SkyScan query 15:43:17 SkyScan query done: ret=0 az=116.805<-7787 ze=66.495<-7567 Statuses=0009 0008 15:43:17 Msec=2250 True Az=116.805 Ze=66.495 Az status=0009 Ze status=0008 15:43:17 Check angles 15:43:17 SkyScan query 15:43:18 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 15:43:18 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 15:43:18 Check angles 15:43:18 SkyScan query 15:43:18 SkyScan query done: ret=0 az=151.485<-10099 ze=66.495<-7567 Statuses=0009 0008 15:43:18 Msec=3750 True Az=151.485 Ze=66.495 Az status=0009 Ze status=0008 15:43:19 Check angles 15:43:19 SkyScan query 15:43:19 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:43:19 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:43:19 Message to Master queued w/err=0: serial=13724 error=0 15:43:24 Received message from Master: op=Filter serial=13725 15:43:24 Color wheel filter change from 0 to 0 15:43:24 FLIGetFilterPos err=0 currentPosition=0 15:43:24 FLIGetStepsRemaining err=0 RemainingSteps=0 15:43:24 Filter is already there-color wheel unchanged 15:43:24 Received message from Master: op=Shutter serial=13726 15:43:24 Shutter LASER close 15:43:24 Received message from Camera: op=State serial=13728 15:43:24 GetSingleValue result=40 Value=cccccccc 15:43:24 SkyScan query 15:43:25 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:43:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:25 Parameters OK 15:43:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:25 Set A/D data flow result=40 15:43:25 Set A/D channel type result=40 15:43:25 Set A/D encoding result=40 15:43:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:25 Set channel filter=0.000000e+000 result=40 15:43:25 Config A/D Result=40 15:43:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:25 Get A/D filter: -9.255963e+061 result=40 15:43:25 Get A/D value=-858993460 result=40 15:43:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:43:25 Parameters OK 15:43:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:43:25 Set A/D data flow result=40 15:43:25 Set A/D channel type result=40 15:43:25 Set A/D encoding result=40 15:43:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:43:25 Set channel filter=0.000000e+000 result=40 15:43:25 Config A/D Result=40 15:43:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:43:25 Get A/D filter: -9.255963e+061 result=40 15:43:25 Get A/D value=-858993460 result=40 15:43:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:43:25 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:43:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:43:25 Aux= 15:43:25 Message to Camera, serial 13728 queued 15:43:56 Received message from Master: op=PointingHead serial=13735 15:43:56 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:43:56 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:43:56 Point started: ret=0 15:43:56 point_skyscan result=0 15:43:57 Check angles 15:43:57 SkyScan query 15:43:57 SkyScan query done: ret=0 az=135.195<-9013 ze=36.84<-9544 Statuses=0009 0009 15:43:57 Msec=0 True Az=135.195 Ze=36.84 Az status=0009 Ze status=0009 15:43:58 Check angles 15:43:58 SkyScan query 15:43:58 SkyScan query done: ret=0 az=117.27<-7818 ze=15.465<-10969 Statuses=0009 0009 15:43:58 Msec=750 True Az=117.27 Ze=15.465 Az status=0009 Ze status=0009 15:43:58 Check angles 15:43:58 SkyScan query 15:43:59 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.505<-12367 Statuses=0009 0009 15:43:59 Msec=1500 True Az=99.945 Ze=-5.505 Az status=0009 Ze status=0009 15:43:59 Check angles 15:43:59 SkyScan query 15:44:00 SkyScan query done: ret=0 az=82.44<-5496 ze=-26.475<-13765 Statuses=0009 0009 15:44:00 Msec=2250 True Az=82.44 Ze=-26.475 Az status=0009 Ze status=0009 15:44:00 Check angles 15:44:00 SkyScan query 15:44:00 SkyScan query done: ret=0 az=64.905<-4327 ze=-38.565<-14571 Statuses=0009 0008 15:44:00 Msec=3000 True Az=64.905 Ze=-38.565 Az status=0009 Ze status=0008 15:44:01 Check angles 15:44:01 SkyScan query 15:44:01 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.535<-14569 Statuses=0009 0008 15:44:01 Msec=3750 True Az=47.445 Ze=-38.535 Az status=0009 Ze status=0008 15:44:01 Check angles 15:44:01 SkyScan query 15:44:02 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 15:44:02 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 15:44:02 Message to Master queued w/err=0: serial=13735 error=0 15:44:07 Received message from Master: op=Filter serial=13736 15:44:07 Color wheel filter change from 0 to 0 15:44:07 FLIGetFilterPos err=0 currentPosition=0 15:44:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:07 Filter is already there-color wheel unchanged 15:44:07 Received message from Master: op=Shutter serial=13737 15:44:07 Shutter LASER close 15:44:07 Received message from Camera: op=State serial=13739 15:44:07 GetSingleValue result=40 Value=cccccccc 15:44:07 SkyScan query 15:44:08 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:44:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:08 Parameters OK 15:44:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:08 Set A/D data flow result=40 15:44:08 Set A/D channel type result=40 15:44:08 Set A/D encoding result=40 15:44:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:08 Set channel filter=0.000000e+000 result=40 15:44:08 Config A/D Result=40 15:44:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:08 Get A/D filter: -9.255963e+061 result=40 15:44:08 Get A/D value=-858993460 result=40 15:44:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:08 Parameters OK 15:44:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:08 Set A/D data flow result=40 15:44:08 Set A/D channel type result=40 15:44:08 Set A/D encoding result=40 15:44:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:08 Set channel filter=0.000000e+000 result=40 15:44:08 Config A/D Result=40 15:44:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:08 Get A/D filter: -9.255963e+061 result=40 15:44:08 Get A/D value=-858993460 result=40 15:44:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:08 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:08 Aux= 15:44:08 Message to Camera, serial 13739 queued 15:44:39 Received message from Master: op=PointingHead serial=13746 15:44:39 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:44:39 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:44:39 Point started: ret=0 15:44:39 point_skyscan result=0 15:44:40 Check angles 15:44:40 SkyScan query 15:44:40 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.31<-16554 Statuses=0009 0009 15:44:40 Msec=0 True Az=63.96 Ze=-68.31 Az status=0009 Ze status=0009 15:44:40 Check angles 15:44:40 SkyScan query 15:44:41 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.73<-17982 Statuses=0009 0009 15:44:41 Msec=750 True Az=81.84 Ze=-89.73 Az status=0009 Ze status=0009 15:44:41 Check angles 15:44:41 SkyScan query 15:44:42 SkyScan query done: ret=0 az=99.705<-6647 ze=-111.09<-19406 Statuses=0009 0009 15:44:42 Msec=1500 True Az=99.705 Ze=-111.09 Az status=0009 Ze status=0009 15:44:42 Check angles 15:44:42 SkyScan query 15:44:43 SkyScan query done: ret=0 az=117.18<-7812 ze=-132.045<-20803 Statuses=0009 0009 15:44:43 Msec=2250 True Az=117.18 Ze=-132.045 Az status=0009 Ze status=0009 15:44:43 Check angles 15:44:43 SkyScan query 15:44:43 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.525<-21435 Statuses=0009 0008 15:44:43 Msec=3000 True Az=131.1 Ze=-141.525 Az status=0009 Ze status=0008 15:44:43 Check angles 15:44:43 SkyScan query 15:44:44 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 15:44:44 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 15:44:44 Message to Master queued w/err=0: serial=13746 error=0 15:44:49 Received message from Master: op=Filter serial=13747 15:44:49 Color wheel filter change from 0 to 0 15:44:49 FLIGetFilterPos err=0 currentPosition=0 15:44:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:44:49 Filter is already there-color wheel unchanged 15:44:49 Received message from Master: op=Shutter serial=13748 15:44:49 Shutter LASER close 15:44:49 Received message from Camera: op=State serial=13750 15:44:49 GetSingleValue result=40 Value=cccccccc 15:44:49 SkyScan query 15:44:50 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:44:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:50 Parameters OK 15:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:50 Set A/D data flow result=40 15:44:50 Set A/D channel type result=40 15:44:50 Set A/D encoding result=40 15:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:50 Set channel filter=0.000000e+000 result=40 15:44:50 Config A/D Result=40 15:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:50 Get A/D filter: -9.255963e+061 result=40 15:44:50 Get A/D value=-858993460 result=40 15:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:44:50 Parameters OK 15:44:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:44:50 Set A/D data flow result=40 15:44:50 Set A/D channel type result=40 15:44:50 Set A/D encoding result=40 15:44:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:44:50 Set channel filter=0.000000e+000 result=40 15:44:50 Config A/D Result=40 15:44:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:44:50 Get A/D filter: -9.255963e+061 result=40 15:44:50 Get A/D value=-858993460 result=40 15:44:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:44:50 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:44:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:44:50 Aux= 15:44:50 Message to Camera, serial 13750 queued 15:45:21 Received message from Master: op=PointingHead serial=13757 15:45:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:45:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:45:21 Point started: ret=0 15:45:21 point_skyscan result=0 15:45:22 Check angles 15:45:22 SkyScan query 15:45:22 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 15:45:22 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 15:45:23 Check angles 15:45:23 SkyScan query 15:45:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:45:23 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:45:23 Message to Master queued w/err=0: serial=13757 error=0 15:45:28 Received message from Master: op=Filter serial=13758 15:45:28 Color wheel filter change from 0 to 0 15:45:28 FLIGetFilterPos err=0 currentPosition=0 15:45:28 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:28 Filter is already there-color wheel unchanged 15:45:28 Received message from Master: op=Shutter serial=13759 15:45:28 Shutter LASER open 15:45:28 Received message from Camera: op=State serial=13761 15:45:28 GetSingleValue result=40 Value=cccccccc 15:45:28 SkyScan query 15:45:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:45:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:29 Parameters OK 15:45:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:29 Set A/D data flow result=40 15:45:29 Set A/D channel type result=40 15:45:29 Set A/D encoding result=40 15:45:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:29 Set channel filter=0.000000e+000 result=40 15:45:29 Config A/D Result=40 15:45:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:29 Get A/D filter: -9.255963e+061 result=40 15:45:29 Get A/D value=-858993460 result=40 15:45:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:29 Parameters OK 15:45:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:29 Set A/D data flow result=40 15:45:29 Set A/D channel type result=40 15:45:29 Set A/D encoding result=40 15:45:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:29 Set channel filter=0.000000e+000 result=40 15:45:29 Config A/D Result=40 15:45:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:29 Get A/D filter: -9.255963e+061 result=40 15:45:29 Get A/D value=-858993460 result=40 15:45:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:29 Aux= 15:45:29 Message to Camera, serial 13761 queued 15:45:31 Received message from Master: op=Shutter serial=13765 15:45:31 Shutter LASER close 15:45:32 Received message from Master: op=PointingHead serial=13769 15:45:32 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:45:32 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:45:32 Point started: ret=0 15:45:32 point_skyscan result=0 15:45:33 Check angles 15:45:33 SkyScan query 15:45:34 SkyScan query done: ret=0 az=136.35<-9090 ze=-142.74<-21516 Statuses=0009 0009 15:45:34 Msec=0 True Az=136.35 Ze=-142.74 Az status=0009 Ze status=0009 15:45:34 Check angles 15:45:34 SkyScan query 15:45:34 SkyScan query done: ret=0 az=153.825<-10255 ze=-121.785<-20119 Statuses=0009 0009 15:45:34 Msec=750 True Az=153.825 Ze=-121.785 Az status=0009 Ze status=0009 15:45:35 Check angles 15:45:35 SkyScan query 15:45:35 SkyScan query done: ret=0 az=171.285<-11419 ze=-100.845<-18723 Statuses=0009 0009 15:45:35 Msec=1500 True Az=171.285 Ze=-100.845 Az status=0009 Ze status=0009 15:45:35 Check angles 15:45:35 SkyScan query 15:45:36 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.425<-17295 Statuses=0008 0009 15:45:36 Msec=2250 True Az=176.025 Ze=-79.425 Az status=0008 Ze status=0009 15:45:36 Check angles 15:45:36 SkyScan query 15:45:37 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.99<-15866 Statuses=0008 0009 15:45:37 Msec=3000 True Az=175.995 Ze=-57.99 Az status=0008 Ze status=0009 15:45:37 Check angles 15:45:37 SkyScan query 15:45:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:45:38 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:45:38 Message to Master queued w/err=0: serial=13769 error=0 15:45:43 Received message from Master: op=Filter serial=13770 15:45:43 Color wheel filter change from 0 to 0 15:45:43 FLIGetFilterPos err=0 currentPosition=0 15:45:43 FLIGetStepsRemaining err=0 RemainingSteps=0 15:45:43 Filter is already there-color wheel unchanged 15:45:43 Received message from Master: op=Shutter serial=13771 15:45:43 Shutter LASER close 15:45:43 Received message from Camera: op=State serial=13773 15:45:43 GetSingleValue result=40 Value=cccccccc 15:45:43 SkyScan query 15:45:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:45:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:43 Parameters OK 15:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:43 Set A/D data flow result=40 15:45:43 Set A/D channel type result=40 15:45:43 Set A/D encoding result=40 15:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:43 Set channel filter=0.000000e+000 result=40 15:45:43 Config A/D Result=40 15:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:43 Get A/D filter: -9.255963e+061 result=40 15:45:43 Get A/D value=-858993460 result=40 15:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:45:43 Parameters OK 15:45:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:45:43 Set A/D data flow result=40 15:45:43 Set A/D channel type result=40 15:45:43 Set A/D encoding result=40 15:45:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:45:43 Set channel filter=0.000000e+000 result=40 15:45:43 Config A/D Result=40 15:45:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:45:43 Get A/D filter: -9.255963e+061 result=40 15:45:43 Get A/D value=-858993460 result=40 15:45:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:45:43 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:45:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:45:43 Aux= 15:45:43 Message to Camera, serial 13773 queued 15:46:14 Received message from Master: op=PointingHead serial=13780 15:46:14 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:46:14 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:46:15 Point started: ret=0 15:46:15 point_skyscan result=0 15:46:15 Check angles 15:46:15 SkyScan query 15:46:16 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.78<-13452 Statuses=0009 0009 15:46:16 Msec=0 True Az=152.97 Ze=-21.78 Az status=0009 Ze status=0009 15:46:16 Check angles 15:46:16 SkyScan query 15:46:17 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.345<-12023 Statuses=0009 0009 15:46:17 Msec=750 True Az=135.135 Ze=-0.345 Az status=0009 Ze status=0009 15:46:17 Check angles 15:46:17 SkyScan query 15:46:17 SkyScan query done: ret=0 az=117.315<-7821 ze=20.985<-10601 Statuses=0009 0009 15:46:17 Msec=1500 True Az=117.315 Ze=20.985 Az status=0009 Ze status=0009 15:46:18 Check angles 15:46:18 SkyScan query 15:46:18 SkyScan query done: ret=0 az=99.825<-6655 ze=41.97<-9202 Statuses=0009 0009 15:46:18 Msec=2250 True Az=99.825 Ze=41.97 Az status=0009 Ze status=0009 15:46:18 Check angles 15:46:18 SkyScan query 15:46:19 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 15:46:19 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 15:46:19 Check angles 15:46:19 SkyScan query 15:46:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:46:20 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:46:20 Message to Master queued w/err=0: serial=13780 error=0 15:46:25 Received message from Master: op=Filter serial=13781 15:46:25 Color wheel filter change from 0 to 0 15:46:25 FLIGetFilterPos err=0 currentPosition=0 15:46:25 FLIGetStepsRemaining err=0 RemainingSteps=0 15:46:25 Filter is already there-color wheel unchanged 15:46:25 Received message from Master: op=Shutter serial=13782 15:46:25 Shutter LASER close 15:46:25 Received message from Camera: op=State serial=13784 15:46:25 GetSingleValue result=40 Value=cccccccc 15:46:25 SkyScan query 15:46:26 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:46:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:26 Parameters OK 15:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:26 Set A/D data flow result=40 15:46:26 Set A/D channel type result=40 15:46:26 Set A/D encoding result=40 15:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:26 Set channel filter=0.000000e+000 result=40 15:46:26 Config A/D Result=40 15:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:26 Get A/D filter: -9.255963e+061 result=40 15:46:26 Get A/D value=-858993460 result=40 15:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:46:26 Parameters OK 15:46:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:46:26 Set A/D data flow result=40 15:46:26 Set A/D channel type result=40 15:46:26 Set A/D encoding result=40 15:46:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:46:26 Set channel filter=0.000000e+000 result=40 15:46:26 Config A/D Result=40 15:46:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:46:26 Get A/D filter: -9.255963e+061 result=40 15:46:26 Get A/D value=-858993460 result=40 15:46:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:46:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:46:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:46:26 Aux= 15:46:26 Message to Camera, serial 13784 queued 15:46:56 Received message from Master: op=PointingHead serial=13791 15:46:56 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:46:56 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:46:57 Point started: ret=0 15:46:57 point_skyscan result=0 15:46:57 Check angles 15:46:57 SkyScan query 15:46:58 SkyScan query done: ret=0 az=108.825<-7255 ze=38.49<-9434 Statuses=0009 0008 15:46:58 Msec=0 True Az=108.825 Ze=38.49 Az status=0009 Ze status=0008 15:46:58 Check angles 15:46:58 SkyScan query 15:46:59 SkyScan query done: ret=0 az=126.375<-8425 ze=38.505<-9433 Statuses=0009 0008 15:46:59 Msec=750 True Az=126.375 Ze=38.505 Az status=0009 Ze status=0008 15:46:59 Check angles 15:46:59 SkyScan query 15:47:00 SkyScan query done: ret=0 az=143.775<-9585 ze=38.505<-9433 Statuses=0009 0008 15:47:00 Msec=1500 True Az=143.775 Ze=38.505 Az status=0009 Ze status=0008 15:47:00 Check angles 15:47:00 SkyScan query 15:47:00 SkyScan query done: ret=0 az=161.22<-10748 ze=38.505<-9433 Statuses=0009 0008 15:47:00 Msec=2250 True Az=161.22 Ze=38.505 Az status=0009 Ze status=0008 15:47:01 Check angles 15:47:01 SkyScan query 15:47:01 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 15:47:01 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 15:47:01 Check angles 15:47:01 SkyScan query 15:47:02 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:47:02 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:47:02 Message to Master queued w/err=0: serial=13791 error=0 15:47:07 Received message from Master: op=Filter serial=13792 15:47:07 Color wheel filter change from 0 to 0 15:47:07 FLIGetFilterPos err=0 currentPosition=0 15:47:07 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:07 Filter is already there-color wheel unchanged 15:47:07 Received message from Master: op=Shutter serial=13793 15:47:07 Shutter LASER close 15:47:07 Received message from Camera: op=State serial=13795 15:47:07 GetSingleValue result=40 Value=cccccccc 15:47:07 SkyScan query 15:47:08 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:47:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:08 Parameters OK 15:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:08 Set A/D data flow result=40 15:47:08 Set A/D channel type result=40 15:47:08 Set A/D encoding result=40 15:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:08 Set channel filter=0.000000e+000 result=40 15:47:08 Config A/D Result=40 15:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:08 Get A/D filter: -9.255963e+061 result=40 15:47:08 Get A/D value=-858993460 result=40 15:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:08 Parameters OK 15:47:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:08 Set A/D data flow result=40 15:47:08 Set A/D channel type result=40 15:47:08 Set A/D encoding result=40 15:47:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:08 Set channel filter=0.000000e+000 result=40 15:47:08 Config A/D Result=40 15:47:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:08 Get A/D filter: -9.255963e+061 result=40 15:47:08 Get A/D value=-858993460 result=40 15:47:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:08 Aux= 15:47:08 Message to Camera, serial 13795 queued 15:47:38 Received message from Master: op=PointingHead serial=13802 15:47:38 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:47:38 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:47:39 Point started: ret=0 15:47:39 point_skyscan result=0 15:47:40 Check angles 15:47:40 SkyScan query 15:47:40 SkyScan query done: ret=0 az=152.985<-10199 ze=8.76<-11416 Statuses=0009 0009 15:47:40 Msec=0 True Az=152.985 Ze=8.76 Az status=0009 Ze status=0009 15:47:40 Check angles 15:47:40 SkyScan query 15:47:41 SkyScan query done: ret=0 az=135.3<-9020 ze=-12.63<-12842 Statuses=0009 0009 15:47:41 Msec=750 True Az=135.3 Ze=-12.63 Az status=0009 Ze status=0009 15:47:41 Check angles 15:47:41 SkyScan query 15:47:42 SkyScan query done: ret=0 az=117.765<-7851 ze=-33.54<-14236 Statuses=0009 0009 15:47:42 Msec=1500 True Az=117.765 Ze=-33.54 Az status=0009 Ze status=0009 15:47:42 Check angles 15:47:42 SkyScan query 15:47:42 SkyScan query done: ret=0 az=100.38<-6692 ze=-51.555<-15437 Statuses=0009 0009 15:47:42 Msec=2250 True Az=100.38 Ze=-51.555 Az status=0009 Ze status=0009 15:47:43 Check angles 15:47:43 SkyScan query 15:47:43 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 15:47:43 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 15:47:43 Check angles 15:47:43 SkyScan query 15:47:44 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:47:44 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:47:44 Message to Master queued w/err=0: serial=13802 error=0 15:47:49 Received message from Master: op=Filter serial=13803 15:47:49 Color wheel filter change from 0 to 0 15:47:49 FLIGetFilterPos err=0 currentPosition=0 15:47:49 FLIGetStepsRemaining err=0 RemainingSteps=0 15:47:49 Filter is already there-color wheel unchanged 15:47:49 Received message from Master: op=Shutter serial=13804 15:47:49 Shutter LASER close 15:47:49 Received message from Camera: op=State serial=13806 15:47:49 GetSingleValue result=40 Value=cccccccc 15:47:49 SkyScan query 15:47:50 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:47:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:50 Parameters OK 15:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:50 Set A/D data flow result=40 15:47:50 Set A/D channel type result=40 15:47:50 Set A/D encoding result=40 15:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:50 Set channel filter=0.000000e+000 result=40 15:47:50 Config A/D Result=40 15:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:50 Get A/D filter: -9.255963e+061 result=40 15:47:50 Get A/D value=-858993460 result=40 15:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:47:50 Parameters OK 15:47:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:47:50 Set A/D data flow result=40 15:47:50 Set A/D channel type result=40 15:47:50 Set A/D encoding result=40 15:47:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:47:50 Set channel filter=0.000000e+000 result=40 15:47:50 Config A/D Result=40 15:47:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:47:50 Get A/D filter: -9.255963e+061 result=40 15:47:50 Get A/D value=-858993460 result=40 15:47:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:47:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:47:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:47:50 Aux= 15:47:50 Message to Camera, serial 13806 queued 15:48:21 Received message from Master: op=PointingHead serial=13813 15:48:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:48:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:48:21 Point started: ret=0 15:48:21 point_skyscan result=0 15:48:22 Check angles 15:48:22 SkyScan query 15:48:22 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.57<-17438 Statuses=0009 0009 15:48:22 Msec=0 True Az=109.17 Ze=-81.57 Az status=0009 Ze status=0009 15:48:22 Check angles 15:48:22 SkyScan query 15:48:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.945<-18863 Statuses=0008 0009 15:48:23 Msec=750 True Az=112.995 Ze=-102.945 Az status=0008 Ze status=0009 15:48:23 Check angles 15:48:23 SkyScan query 15:48:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.9<-20260 Statuses=0008 0009 15:48:24 Msec=1500 True Az=112.995 Ze=-123.9 Az status=0008 Ze status=0009 15:48:24 Check angles 15:48:24 SkyScan query 15:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.305<-21687 Statuses=0008 0009 15:48:25 Msec=2250 True Az=112.995 Ze=-145.305 Az status=0008 Ze status=0009 15:48:25 Check angles 15:48:25 SkyScan query 15:48:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.695<-23113 Statuses=0008 0009 15:48:25 Msec=3000 True Az=112.995 Ze=-166.695 Az status=0008 Ze status=0009 15:48:25 Check angles 15:48:25 SkyScan query 15:48:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:48:26 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:48:26 Message to Master queued w/err=0: serial=13813 error=0 15:48:31 Received message from Master: op=Filter serial=13814 15:48:31 Color wheel filter change from 0 to 0 15:48:31 FLIGetFilterPos err=0 currentPosition=0 15:48:31 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:31 Filter is already there-color wheel unchanged 15:48:31 Received message from Master: op=Shutter serial=13815 15:48:31 Shutter LASER open 15:48:31 Received message from Camera: op=State serial=13817 15:48:31 GetSingleValue result=40 Value=cccccccc 15:48:31 SkyScan query 15:48:32 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:48:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:32 Parameters OK 15:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:32 Set A/D data flow result=40 15:48:32 Set A/D channel type result=40 15:48:32 Set A/D encoding result=40 15:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:32 Set channel filter=0.000000e+000 result=40 15:48:32 Config A/D Result=40 15:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:32 Get A/D filter: -9.255963e+061 result=40 15:48:32 Get A/D value=-858993460 result=40 15:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:32 Parameters OK 15:48:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:32 Set A/D data flow result=40 15:48:32 Set A/D channel type result=40 15:48:32 Set A/D encoding result=40 15:48:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:32 Set channel filter=0.000000e+000 result=40 15:48:32 Config A/D Result=40 15:48:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:32 Get A/D filter: -9.255963e+061 result=40 15:48:32 Get A/D value=-858993460 result=40 15:48:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:32 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:32 Aux= 15:48:32 Message to Camera, serial 13817 queued 15:48:35 Received message from Master: op=Shutter serial=13821 15:48:35 Shutter LASER close 15:48:35 Received message from Master: op=PointingHead serial=13825 15:48:35 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:48:35 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:48:35 Point started: ret=0 15:48:35 point_skyscan result=0 15:48:36 Check angles 15:48:36 SkyScan query 15:48:37 SkyScan query done: ret=0 az=89.82<-5988 ze=157.305<-1513 Statuses=0009 0009 15:48:37 Msec=0 True Az=89.82 Ze=157.305 Az status=0009 Ze status=0009 15:48:37 Check angles 15:48:37 SkyScan query 15:48:37 SkyScan query done: ret=0 az=72.42<-4828 ze=136.275<-2915 Statuses=0009 0009 15:48:37 Msec=750 True Az=72.42 Ze=136.275 Az status=0009 Ze status=0009 15:48:38 Check angles 15:48:38 SkyScan query 15:48:38 SkyScan query done: ret=0 az=54.75<-3650 ze=114.96<-4336 Statuses=0009 0009 15:48:38 Msec=1500 True Az=54.75 Ze=114.96 Az status=0009 Ze status=0009 15:48:38 Check angles 15:48:38 SkyScan query 15:48:39 SkyScan query done: ret=0 az=40.875<-2725 ze=93.975<-5735 Statuses=0009 0009 15:48:39 Msec=2250 True Az=40.875 Ze=93.975 Az status=0009 Ze status=0009 15:48:39 Check angles 15:48:39 SkyScan query 15:48:40 SkyScan query done: ret=0 az=40.995<-2733 ze=73.02<-7132 Statuses=0008 0009 15:48:40 Msec=3000 True Az=40.995 Ze=73.02 Az status=0008 Ze status=0009 15:48:40 Check angles 15:48:40 SkyScan query 15:48:40 SkyScan query done: ret=0 az=40.995<-2733 ze=52.59<-8494 Statuses=0008 0009 15:48:40 Msec=3750 True Az=40.995 Ze=52.59 Az status=0008 Ze status=0009 15:48:41 Check angles 15:48:41 SkyScan query 15:48:41 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:48:41 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:48:41 Message to Master queued w/err=0: serial=13825 error=0 15:48:46 Received message from Master: op=Filter serial=13826 15:48:46 Color wheel filter change from 0 to 0 15:48:46 FLIGetFilterPos err=0 currentPosition=0 15:48:46 FLIGetStepsRemaining err=0 RemainingSteps=0 15:48:46 Filter is already there-color wheel unchanged 15:48:46 Received message from Master: op=Shutter serial=13827 15:48:46 Shutter LASER close 15:48:46 Received message from Camera: op=State serial=13829 15:48:46 GetSingleValue result=40 Value=cccccccc 15:48:46 SkyScan query 15:48:47 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:48:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:47 Parameters OK 15:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:47 Set A/D data flow result=40 15:48:47 Set A/D channel type result=40 15:48:47 Set A/D encoding result=40 15:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:47 Set channel filter=0.000000e+000 result=40 15:48:47 Config A/D Result=40 15:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:47 Get A/D filter: -9.255963e+061 result=40 15:48:47 Get A/D value=-858993460 result=40 15:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:48:47 Parameters OK 15:48:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:48:47 Set A/D data flow result=40 15:48:47 Set A/D channel type result=40 15:48:47 Set A/D encoding result=40 15:48:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:48:47 Set channel filter=0.000000e+000 result=40 15:48:47 Config A/D Result=40 15:48:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:48:47 Get A/D filter: -9.255963e+061 result=40 15:48:47 Get A/D value=-858993460 result=40 15:48:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:48:47 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:48:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:48:47 Aux= 15:48:47 Message to Camera, serial 13829 queued 15:49:18 Received message from Master: op=PointingHead serial=13836 15:49:18 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:49:18 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:49:18 Point started: ret=0 15:49:18 point_skyscan result=0 15:49:19 Check angles 15:49:19 SkyScan query 15:49:20 SkyScan query done: ret=0 az=63.945<-4263 ze=66.555<-7563 Statuses=0009 0008 15:49:20 Msec=0 True Az=63.945 Ze=66.555 Az status=0009 Ze status=0008 15:49:20 Check angles 15:49:20 SkyScan query 15:49:20 SkyScan query done: ret=0 az=81.495<-5433 ze=66.495<-7567 Statuses=0009 0008 15:49:20 Msec=750 True Az=81.495 Ze=66.495 Az status=0009 Ze status=0008 15:49:21 Check angles 15:49:21 SkyScan query 15:49:21 SkyScan query done: ret=0 az=99.465<-6631 ze=66.495<-7567 Statuses=0009 0008 15:49:21 Msec=1500 True Az=99.465 Ze=66.495 Az status=0009 Ze status=0008 15:49:21 Check angles [UTC 2018-12-4 15:49:21] 15:49:21 SkyScan query 15:49:22 SkyScan query done: ret=0 az=118.56<-7904 ze=66.495<-7567 Statuses=0009 0008 15:49:22 Msec=2250 True Az=118.56 Ze=66.495 Az status=0009 Ze status=0008 15:49:22 Check angles 15:49:22 SkyScan query 15:49:23 SkyScan query done: ret=0 az=134.805<-8987 ze=66.495<-7567 Statuses=0009 0008 15:49:23 Msec=3000 True Az=134.805 Ze=66.495 Az status=0009 Ze status=0008 15:49:23 Check angles 15:49:23 SkyScan query 15:49:23 SkyScan query done: ret=0 az=151.98<-10132 ze=66.495<-7567 Statuses=0009 0008 15:49:23 Msec=3750 True Az=151.98 Ze=66.495 Az status=0009 Ze status=0008 15:49:24 Check angles 15:49:24 SkyScan query 15:49:24 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:49:24 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:49:24 Message to Master queued w/err=0: serial=13836 error=0 15:49:29 Received message from Master: op=Filter serial=13837 15:49:29 Color wheel filter change from 0 to 0 15:49:29 FLIGetFilterPos err=0 currentPosition=0 15:49:29 FLIGetStepsRemaining err=0 RemainingSteps=0 15:49:29 Filter is already there-color wheel unchanged 15:49:29 Received message from Master: op=Shutter serial=13838 15:49:29 Shutter LASER close 15:49:29 Received message from Camera: op=State serial=13840 15:49:29 GetSingleValue result=40 Value=cccccccc 15:49:29 SkyScan query 15:49:30 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:49:30 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:30 Parameters OK 15:49:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:30 Set A/D data flow result=40 15:49:30 Set A/D channel type result=40 15:49:30 Set A/D encoding result=40 15:49:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:30 Set channel filter=0.000000e+000 result=40 15:49:30 Config A/D Result=40 15:49:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:30 Get A/D filter: -9.255963e+061 result=40 15:49:30 Get A/D value=-858993460 result=40 15:49:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:30 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:49:30 Parameters OK 15:49:30 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:49:30 Set A/D data flow result=40 15:49:30 Set A/D channel type result=40 15:49:30 Set A/D encoding result=40 15:49:30 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:49:30 Set channel filter=0.000000e+000 result=40 15:49:30 Config A/D Result=40 15:49:30 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:49:30 Get A/D filter: -9.255963e+061 result=40 15:49:30 Get A/D value=-858993460 result=40 15:49:30 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:49:30 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:49:30 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:49:30 Aux= 15:49:30 Message to Camera, serial 13840 queued 15:50:01 Received message from Master: op=PointingHead serial=13847 15:50:01 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:50:01 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:50:01 Point started: ret=0 15:50:01 point_skyscan result=0 15:50:02 Check angles 15:50:02 SkyScan query 15:50:02 SkyScan query done: ret=0 az=134.805<-8987 ze=36.51<-9566 Statuses=0009 0009 15:50:02 Msec=0 True Az=134.805 Ze=36.51 Az status=0009 Ze status=0009 15:50:03 Check angles 15:50:03 SkyScan query 15:50:03 SkyScan query done: ret=0 az=117.27<-7818 ze=15.57<-10962 Statuses=0009 0009 15:50:03 Msec=750 True Az=117.27 Ze=15.57 Az status=0009 Ze status=0009 15:50:03 Check angles 15:50:03 SkyScan query 15:50:04 SkyScan query done: ret=0 az=99.945<-6663 ze=-5.415<-12361 Statuses=0009 0009 15:50:04 Msec=1500 True Az=99.945 Ze=-5.415 Az status=0009 Ze status=0009 15:50:04 Check angles 15:50:04 SkyScan query 15:50:05 SkyScan query done: ret=0 az=82.425<-5495 ze=-26.37<-13758 Statuses=0009 0009 15:50:05 Msec=2250 True Az=82.425 Ze=-26.37 Az status=0009 Ze status=0009 15:50:05 Check angles 15:50:05 SkyScan query 15:50:05 SkyScan query done: ret=0 az=64.875<-4325 ze=-38.565<-14571 Statuses=0009 0008 15:50:05 Msec=3000 True Az=64.875 Ze=-38.565 Az status=0009 Ze status=0008 15:50:06 Check angles 15:50:06 SkyScan query 15:50:06 SkyScan query done: ret=0 az=47.4<-3160 ze=-38.535<-14569 Statuses=0009 0008 15:50:06 Msec=3750 True Az=47.4 Ze=-38.535 Az status=0009 Ze status=0008 15:50:06 Check angles 15:50:06 SkyScan query 15:50:07 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 15:50:07 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 15:50:07 Message to Master queued w/err=0: serial=13847 error=0 15:50:12 Received message from Master: op=Filter serial=13848 15:50:12 Color wheel filter change from 0 to 0 15:50:12 FLIGetFilterPos err=0 currentPosition=0 15:50:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:12 Filter is already there-color wheel unchanged 15:50:12 Received message from Master: op=Shutter serial=13849 15:50:12 Shutter LASER close 15:50:12 Received message from Camera: op=State serial=13851 15:50:12 GetSingleValue result=40 Value=cccccccc 15:50:12 SkyScan query 15:50:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:50:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:13 Parameters OK 15:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:13 Set A/D data flow result=40 15:50:13 Set A/D channel type result=40 15:50:13 Set A/D encoding result=40 15:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:13 Set channel filter=0.000000e+000 result=40 15:50:13 Config A/D Result=40 15:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:13 Get A/D filter: -9.255963e+061 result=40 15:50:13 Get A/D value=-858993460 result=40 15:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:13 Parameters OK 15:50:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:13 Set A/D data flow result=40 15:50:13 Set A/D channel type result=40 15:50:13 Set A/D encoding result=40 15:50:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:13 Set channel filter=0.000000e+000 result=40 15:50:13 Config A/D Result=40 15:50:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:13 Get A/D filter: -9.255963e+061 result=40 15:50:13 Get A/D value=-858993460 result=40 15:50:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:13 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:13 Aux= 15:50:13 Message to Camera, serial 13851 queued 15:50:44 Received message from Master: op=PointingHead serial=13858 15:50:44 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:50:44 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:50:44 Point started: ret=0 15:50:44 point_skyscan result=0 15:50:45 Check angles 15:50:45 SkyScan query 15:50:45 SkyScan query done: ret=0 az=64.02<-4268 ze=-68.385<-16559 Statuses=0009 0009 15:50:45 Msec=0 True Az=64.02 Ze=-68.385 Az status=0009 Ze status=0009 15:50:45 Check angles 15:50:45 SkyScan query 15:50:46 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.79<-17986 Statuses=0009 0009 15:50:46 Msec=750 True Az=81.855 Ze=-89.79 Az status=0009 Ze status=0009 15:50:46 Check angles 15:50:46 SkyScan query 15:50:47 SkyScan query done: ret=0 az=99.615<-6641 ze=-111.165<-19411 Statuses=0009 0009 15:50:47 Msec=1500 True Az=99.615 Ze=-111.165 Az status=0009 Ze status=0009 15:50:47 Check angles 15:50:47 SkyScan query 15:50:48 SkyScan query done: ret=0 az=117.195<-7813 ze=-132.12<-20808 Statuses=0009 0009 15:50:48 Msec=2250 True Az=117.195 Ze=-132.12 Az status=0009 Ze status=0009 15:50:48 Check angles 15:50:48 SkyScan query 15:50:48 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.54<-21436 Statuses=0009 0008 15:50:48 Msec=3000 True Az=131.01 Ze=-141.54 Az status=0009 Ze status=0008 15:50:48 Check angles 15:50:48 SkyScan query 15:50:49 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:50:49 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:50:49 Message to Master queued w/err=0: serial=13858 error=0 15:50:54 Received message from Master: op=Filter serial=13859 15:50:54 Color wheel filter change from 0 to 0 15:50:54 FLIGetFilterPos err=0 currentPosition=0 15:50:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:50:54 Filter is already there-color wheel unchanged 15:50:54 Received message from Master: op=Shutter serial=13860 15:50:54 Shutter LASER close 15:50:54 Received message from Camera: op=State serial=13862 15:50:54 GetSingleValue result=40 Value=cccccccc 15:50:54 SkyScan query 15:50:55 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:50:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:55 Parameters OK 15:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:55 Set A/D data flow result=40 15:50:55 Set A/D channel type result=40 15:50:55 Set A/D encoding result=40 15:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:55 Set channel filter=0.000000e+000 result=40 15:50:55 Config A/D Result=40 15:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:55 Get A/D filter: -9.255963e+061 result=40 15:50:55 Get A/D value=-858993460 result=40 15:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:50:55 Parameters OK 15:50:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:50:55 Set A/D data flow result=40 15:50:55 Set A/D channel type result=40 15:50:55 Set A/D encoding result=40 15:50:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:50:55 Set channel filter=0.000000e+000 result=40 15:50:55 Config A/D Result=40 15:50:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:50:55 Get A/D filter: -9.255963e+061 result=40 15:50:55 Get A/D value=-858993460 result=40 15:50:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:50:55 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:50:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:50:55 Aux= 15:50:55 Message to Camera, serial 13862 queued 15:51:26 Received message from Master: op=PointingHead serial=13869 15:51:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:51:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:51:26 Point started: ret=0 15:51:26 point_skyscan result=0 15:51:27 Check angles 15:51:27 SkyScan query 15:51:27 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.57<-23438 Statuses=0009 0009 15:51:27 Msec=0 True Az=113.01 Ze=-171.57 Az status=0009 Ze status=0009 15:51:28 Check angles 15:51:28 SkyScan query 15:51:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:51:28 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:51:28 Message to Master queued w/err=0: serial=13869 error=0 15:51:33 Received message from Master: op=Filter serial=13870 15:51:33 Color wheel filter change from 0 to 0 15:51:33 FLIGetFilterPos err=0 currentPosition=0 15:51:33 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:33 Filter is already there-color wheel unchanged 15:51:33 Received message from Master: op=Shutter serial=13871 15:51:33 Shutter LASER open 15:51:33 Received message from Camera: op=State serial=13873 15:51:33 GetSingleValue result=40 Value=cccccccc 15:51:33 SkyScan query 15:51:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:51:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:34 Parameters OK 15:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:34 Set A/D data flow result=40 15:51:34 Set A/D channel type result=40 15:51:34 Set A/D encoding result=40 15:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:34 Set channel filter=0.000000e+000 result=40 15:51:34 Config A/D Result=40 15:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:34 Get A/D filter: -9.255963e+061 result=40 15:51:34 Get A/D value=-858993460 result=40 15:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:34 Parameters OK 15:51:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:34 Set A/D data flow result=40 15:51:34 Set A/D channel type result=40 15:51:34 Set A/D encoding result=40 15:51:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:34 Set channel filter=0.000000e+000 result=40 15:51:34 Config A/D Result=40 15:51:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:34 Get A/D filter: -9.255963e+061 result=40 15:51:34 Get A/D value=-858993460 result=40 15:51:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:34 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:34 Aux= 15:51:34 Message to Camera, serial 13873 queued 15:51:36 Received message from Master: op=Shutter serial=13877 15:51:36 Shutter LASER close 15:51:37 Received message from Master: op=PointingHead serial=13881 15:51:37 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:51:37 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:51:37 Point started: ret=0 15:51:37 point_skyscan result=0 15:51:38 Check angles 15:51:38 SkyScan query 15:51:39 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.95<-21530 Statuses=0009 0009 15:51:39 Msec=0 True Az=136.155 Ze=-142.95 Az status=0009 Ze status=0009 15:51:39 Check angles 15:51:39 SkyScan query 15:51:39 SkyScan query done: ret=0 az=153.705<-10247 ze=-121.98<-20132 Statuses=0009 0009 15:51:39 Msec=750 True Az=153.705 Ze=-121.98 Az status=0009 Ze status=0009 15:51:40 Check angles 15:51:40 SkyScan query 15:51:40 SkyScan query done: ret=0 az=171.54<-11436 ze=-100.605<-18707 Statuses=0009 0009 15:51:40 Msec=1500 True Az=171.54 Ze=-100.605 Az status=0009 Ze status=0009 15:51:40 Check angles 15:51:40 SkyScan query 15:51:41 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.2<-17280 Statuses=0008 0009 15:51:41 Msec=2250 True Az=176.01 Ze=-79.2 Az status=0008 Ze status=0009 15:51:41 Check angles 15:51:41 SkyScan query 15:51:42 SkyScan query done: ret=0 az=175.995<-11733 ze=-57.795<-15853 Statuses=0008 0009 15:51:42 Msec=3000 True Az=175.995 Ze=-57.795 Az status=0008 Ze status=0009 15:51:42 Check angles 15:51:42 SkyScan query 15:51:43 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 15:51:43 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 15:51:43 Message to Master queued w/err=0: serial=13881 error=0 15:51:48 Received message from Master: op=Filter serial=13882 15:51:48 Color wheel filter change from 0 to 0 15:51:48 FLIGetFilterPos err=0 currentPosition=0 15:51:48 FLIGetStepsRemaining err=0 RemainingSteps=0 15:51:48 Filter is already there-color wheel unchanged 15:51:48 Received message from Master: op=Shutter serial=13883 15:51:48 Shutter LASER close 15:51:48 Received message from Camera: op=State serial=13885 15:51:48 GetSingleValue result=40 Value=cccccccc 15:51:48 SkyScan query 15:51:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:51:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:48 Parameters OK 15:51:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:48 Set A/D data flow result=40 15:51:48 Set A/D channel type result=40 15:51:48 Set A/D encoding result=40 15:51:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:48 Set channel filter=0.000000e+000 result=40 15:51:48 Config A/D Result=40 15:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:48 Get A/D filter: -9.255963e+061 result=40 15:51:48 Get A/D value=-858993460 result=40 15:51:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:51:48 Parameters OK 15:51:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:51:48 Set A/D data flow result=40 15:51:48 Set A/D channel type result=40 15:51:48 Set A/D encoding result=40 15:51:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:51:48 Set channel filter=0.000000e+000 result=40 15:51:48 Config A/D Result=40 15:51:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:51:48 Get A/D filter: -9.255963e+061 result=40 15:51:48 Get A/D value=-858993460 result=40 15:51:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:51:48 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:51:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:51:48 Aux= 15:51:48 Message to Camera, serial 13885 queued 15:51:49 Received message from Master: op=Identify serial=13886 [UTC 2018-12-4 15:52:09] 15:52:19 Received message from Master: op=PointingHead serial=13895 15:52:19 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:52:19 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:52:20 Point started: ret=0 15:52:20 point_skyscan result=0 15:52:20 Check angles 15:52:20 SkyScan query 15:52:21 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.285<-13419 Statuses=0009 0009 15:52:21 Msec=0 True Az=152.67 Ze=-21.285 Az status=0009 Ze status=0009 15:52:21 Check angles 15:52:21 SkyScan query 15:52:22 SkyScan query done: ret=0 az=135.135<-9009 ze=-0.3<-12020 Statuses=0009 0009 15:52:22 Msec=750 True Az=135.135 Ze=-0.3 Az status=0009 Ze status=0009 15:52:22 Check angles 15:52:22 SkyScan query 15:52:22 SkyScan query done: ret=0 az=117.585<-7839 ze=20.64<-10624 Statuses=0009 0009 15:52:22 Msec=1500 True Az=117.585 Ze=20.64 Az status=0009 Ze status=0009 15:52:23 Check angles 15:52:23 SkyScan query 15:52:23 SkyScan query done: ret=0 az=100.185<-6679 ze=41.595<-9227 Statuses=0009 0009 15:52:23 Msec=2250 True Az=100.185 Ze=41.595 Az status=0009 Ze status=0009 15:52:23 Check angles 15:52:23 SkyScan query 15:52:24 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 15:52:24 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 15:52:24 Check angles 15:52:24 SkyScan query 15:52:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:52:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:52:25 Message to Master queued w/err=0: serial=13895 error=0 15:52:30 Received message from Master: op=Filter serial=13896 15:52:30 Color wheel filter change from 0 to 0 15:52:30 FLIGetFilterPos err=0 currentPosition=0 15:52:30 FLIGetStepsRemaining err=0 RemainingSteps=0 15:52:30 Filter is already there-color wheel unchanged 15:52:30 Received message from Master: op=Shutter serial=13897 15:52:30 Shutter LASER close 15:52:30 Received message from Camera: op=State serial=13899 15:52:30 GetSingleValue result=40 Value=cccccccc 15:52:30 SkyScan query 15:52:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:52:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:31 Parameters OK 15:52:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:31 Set A/D data flow result=40 15:52:31 Set A/D channel type result=40 15:52:31 Set A/D encoding result=40 15:52:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:31 Set channel filter=0.000000e+000 result=40 15:52:31 Config A/D Result=40 15:52:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:31 Get A/D filter: -9.255963e+061 result=40 15:52:31 Get A/D value=-858993460 result=40 15:52:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:52:31 Parameters OK 15:52:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:52:31 Set A/D data flow result=40 15:52:31 Set A/D channel type result=40 15:52:31 Set A/D encoding result=40 15:52:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:52:31 Set channel filter=0.000000e+000 result=40 15:52:31 Config A/D Result=40 15:52:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:52:31 Get A/D filter: -9.255963e+061 result=40 15:52:31 Get A/D value=-858993460 result=40 15:52:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:52:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:52:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:52:31 Aux= 15:52:31 Message to Camera, serial 13899 queued 15:53:01 Received message from Master: op=PointingHead serial=13906 15:53:01 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:53:01 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:53:02 Point started: ret=0 15:53:02 point_skyscan result=0 15:53:02 Check angles 15:53:02 SkyScan query 15:53:03 SkyScan query done: ret=0 az=109.17<-7278 ze=38.49<-9434 Statuses=0009 0008 15:53:03 Msec=0 True Az=109.17 Ze=38.49 Az status=0009 Ze status=0008 15:53:03 Check angles 15:53:03 SkyScan query 15:53:04 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 15:53:04 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 15:53:04 Check angles 15:53:04 SkyScan query 15:53:05 SkyScan query done: ret=0 az=144<-9600 ze=38.505<-9433 Statuses=0009 0008 15:53:05 Msec=1500 True Az=144 Ze=38.505 Az status=0009 Ze status=0008 15:53:05 Check angles 15:53:05 SkyScan query 15:53:05 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 15:53:05 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 15:53:05 Check angles 15:53:05 SkyScan query 15:53:06 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 15:53:06 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 15:53:06 Check angles 15:53:06 SkyScan query 15:53:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:53:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:53:07 Message to Master queued w/err=0: serial=13906 error=0 15:53:12 Received message from Master: op=Filter serial=13907 15:53:12 Color wheel filter change from 0 to 0 15:53:12 FLIGetFilterPos err=0 currentPosition=0 15:53:12 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:12 Filter is already there-color wheel unchanged 15:53:12 Received message from Master: op=Shutter serial=13908 15:53:12 Shutter LASER close 15:53:12 Received message from Camera: op=State serial=13910 15:53:12 GetSingleValue result=40 Value=cccccccc 15:53:12 SkyScan query 15:53:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:53:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:13 Parameters OK 15:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:13 Set A/D data flow result=40 15:53:13 Set A/D channel type result=40 15:53:13 Set A/D encoding result=40 15:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:13 Set channel filter=0.000000e+000 result=40 15:53:13 Config A/D Result=40 15:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:13 Get A/D filter: -9.255963e+061 result=40 15:53:13 Get A/D value=-858993460 result=40 15:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:13 Parameters OK 15:53:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:13 Set A/D data flow result=40 15:53:13 Set A/D channel type result=40 15:53:13 Set A/D encoding result=40 15:53:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:13 Set channel filter=0.000000e+000 result=40 15:53:13 Config A/D Result=40 15:53:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:13 Get A/D filter: -9.255963e+061 result=40 15:53:13 Get A/D value=-858993460 result=40 15:53:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:13 Aux= 15:53:13 Message to Camera, serial 13910 queued 15:53:44 Received message from Master: op=PointingHead serial=13917 15:53:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:53:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:53:44 Point started: ret=0 15:53:44 point_skyscan result=0 15:53:45 Check angles 15:53:45 SkyScan query 15:53:45 SkyScan query done: ret=0 az=152.685<-10179 ze=8.22<-11452 Statuses=0009 0009 15:53:45 Msec=0 True Az=152.685 Ze=8.22 Az status=0009 Ze status=0009 15:53:45 Check angles 15:53:45 SkyScan query 15:53:46 SkyScan query done: ret=0 az=134.67<-8978 ze=-13.185<-12879 Statuses=0009 0009 15:53:46 Msec=750 True Az=134.67 Ze=-13.185 Az status=0009 Ze status=0009 15:53:46 Check angles 15:53:46 SkyScan query 15:53:47 SkyScan query done: ret=0 az=117.285<-7819 ze=-34.11<-14274 Statuses=0009 0009 15:53:47 Msec=1500 True Az=117.285 Ze=-34.11 Az status=0009 Ze status=0009 15:53:47 Check angles 15:53:47 SkyScan query 15:53:47 SkyScan query done: ret=0 az=99.87<-6658 ze=-51.555<-15437 Statuses=0009 0009 15:53:47 Msec=2250 True Az=99.87 Ze=-51.555 Az status=0009 Ze status=0009 15:53:48 Check angles 15:53:48 SkyScan query 15:53:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:53:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:53:48 Check angles 15:53:48 SkyScan query 15:53:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:53:49 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:53:49 Message to Master queued w/err=0: serial=13917 error=0 15:53:54 Received message from Master: op=Filter serial=13918 15:53:54 Color wheel filter change from 0 to 0 15:53:54 FLIGetFilterPos err=0 currentPosition=0 15:53:54 FLIGetStepsRemaining err=0 RemainingSteps=0 15:53:54 Filter is already there-color wheel unchanged 15:53:54 Received message from Master: op=Shutter serial=13919 15:53:54 Shutter LASER close 15:53:54 Received message from Camera: op=State serial=13921 15:53:54 GetSingleValue result=40 Value=cccccccc 15:53:54 SkyScan query 15:53:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:53:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:55 Parameters OK 15:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:55 Set A/D data flow result=40 15:53:55 Set A/D channel type result=40 15:53:55 Set A/D encoding result=40 15:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:55 Set channel filter=0.000000e+000 result=40 15:53:55 Config A/D Result=40 15:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:55 Get A/D filter: -9.255963e+061 result=40 15:53:55 Get A/D value=-858993460 result=40 15:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:53:55 Parameters OK 15:53:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:53:55 Set A/D data flow result=40 15:53:55 Set A/D channel type result=40 15:53:55 Set A/D encoding result=40 15:53:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:53:55 Set channel filter=0.000000e+000 result=40 15:53:55 Config A/D Result=40 15:53:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:53:55 Get A/D filter: -9.255963e+061 result=40 15:53:55 Get A/D value=-858993460 result=40 15:53:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:53:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:53:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:53:55 Aux= 15:53:55 Message to Camera, serial 13921 queued 15:54:26 Received message from Master: op=PointingHead serial=13928 15:54:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:54:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:54:26 Point started: ret=0 15:54:26 point_skyscan result=0 15:54:27 Check angles 15:54:27 SkyScan query 15:54:27 SkyScan query done: ret=0 az=109.05<-7270 ze=-81.405<-17427 Statuses=0009 0009 15:54:27 Msec=0 True Az=109.05 Ze=-81.405 Az status=0009 Ze status=0009 15:54:27 Check angles 15:54:27 SkyScan query 15:54:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.78<-18852 Statuses=0008 0009 15:54:28 Msec=750 True Az=112.995 Ze=-102.78 Az status=0008 Ze status=0009 15:54:28 Check angles 15:54:28 SkyScan query 15:54:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 15:54:29 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 15:54:29 Check angles 15:54:29 SkyScan query 15:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.69<-21646 Statuses=0008 0009 15:54:30 Msec=2250 True Az=112.995 Ze=-144.69 Az status=0008 Ze status=0009 15:54:30 Check angles 15:54:30 SkyScan query 15:54:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.065<-23071 Statuses=0008 0009 15:54:30 Msec=3000 True Az=112.995 Ze=-166.065 Az status=0008 Ze status=0009 15:54:30 Check angles 15:54:30 SkyScan query 15:54:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 15:54:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 15:54:31 Message to Master queued w/err=0: serial=13928 error=0 15:54:36 Received message from Master: op=Filter serial=13929 15:54:36 Color wheel filter change from 0 to 0 15:54:36 FLIGetFilterPos err=0 currentPosition=0 15:54:36 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:36 Filter is already there-color wheel unchanged 15:54:36 Received message from Master: op=Shutter serial=13930 15:54:36 Shutter LASER open 15:54:36 Received message from Camera: op=State serial=13932 15:54:36 GetSingleValue result=40 Value=cccccccc 15:54:36 SkyScan query 15:54:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:54:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:37 Parameters OK 15:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:37 Set A/D data flow result=40 15:54:37 Set A/D channel type result=40 15:54:37 Set A/D encoding result=40 15:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:37 Set channel filter=0.000000e+000 result=40 15:54:37 Config A/D Result=40 15:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:37 Get A/D filter: -9.255963e+061 result=40 15:54:37 Get A/D value=-858993460 result=40 15:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:37 Parameters OK 15:54:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:37 Set A/D data flow result=40 15:54:37 Set A/D channel type result=40 15:54:37 Set A/D encoding result=40 15:54:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:37 Set channel filter=0.000000e+000 result=40 15:54:37 Config A/D Result=40 15:54:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:37 Get A/D filter: -9.255963e+061 result=40 15:54:37 Get A/D value=-858993460 result=40 15:54:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:37 Aux= 15:54:37 Message to Camera, serial 13932 queued 15:54:39 Received message from Master: op=Shutter serial=13936 15:54:39 Shutter LASER close 15:54:40 Received message from Master: op=PointingHead serial=13940 15:54:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 15:54:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 15:54:40 Point started: ret=0 15:54:40 point_skyscan result=0 15:54:41 Check angles 15:54:41 SkyScan query 15:54:42 SkyScan query done: ret=0 az=89.445<-5963 ze=156.915<-1539 Statuses=0009 0009 15:54:42 Msec=0 True Az=89.445 Ze=156.915 Az status=0009 Ze status=0009 15:54:42 Check angles 15:54:42 SkyScan query 15:54:42 SkyScan query done: ret=0 az=71.88<-4792 ze=135.915<-2939 Statuses=0009 0009 15:54:42 Msec=750 True Az=71.88 Ze=135.915 Az status=0009 Ze status=0009 15:54:42 Check angles 15:54:42 SkyScan query 15:54:43 SkyScan query done: ret=0 az=54.66<-3644 ze=115.005<-4333 Statuses=0009 0009 15:54:43 Msec=1500 True Az=54.66 Ze=115.005 Az status=0009 Ze status=0009 15:54:43 Check angles 15:54:43 SkyScan query 15:54:44 SkyScan query done: ret=0 az=40.89<-2726 ze=94.02<-5732 Statuses=0009 0009 15:54:44 Msec=2250 True Az=40.89 Ze=94.02 Az status=0009 Ze status=0009 15:54:44 Check angles 15:54:44 SkyScan query 15:54:45 SkyScan query done: ret=0 az=40.995<-2733 ze=73.05<-7130 Statuses=0008 0009 15:54:45 Msec=3000 True Az=40.995 Ze=73.05 Az status=0008 Ze status=0009 15:54:45 Check angles 15:54:45 SkyScan query 15:54:45 SkyScan query done: ret=0 az=40.995<-2733 ze=52.62<-8492 Statuses=0008 0009 15:54:45 Msec=3750 True Az=40.995 Ze=52.62 Az status=0008 Ze status=0009 15:54:45 Check angles 15:54:45 SkyScan query 15:54:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 15:54:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 15:54:46 Message to Master queued w/err=0: serial=13940 error=0 15:54:51 Received message from Master: op=Filter serial=13941 15:54:51 Color wheel filter change from 0 to 0 15:54:51 FLIGetFilterPos err=0 currentPosition=0 15:54:51 FLIGetStepsRemaining err=0 RemainingSteps=0 15:54:51 Filter is already there-color wheel unchanged 15:54:51 Received message from Master: op=Shutter serial=13942 15:54:51 Shutter LASER close 15:54:51 Received message from Camera: op=State serial=13944 15:54:51 GetSingleValue result=40 Value=cccccccc 15:54:51 SkyScan query 15:54:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 15:54:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:52 Parameters OK 15:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:52 Set A/D data flow result=40 15:54:52 Set A/D channel type result=40 15:54:52 Set A/D encoding result=40 15:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:52 Set channel filter=0.000000e+000 result=40 15:54:52 Config A/D Result=40 15:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:52 Get A/D filter: -9.255963e+061 result=40 15:54:52 Get A/D value=-858993460 result=40 15:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:54:52 Parameters OK 15:54:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:54:52 Set A/D data flow result=40 15:54:52 Set A/D channel type result=40 15:54:52 Set A/D encoding result=40 15:54:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:54:52 Set channel filter=0.000000e+000 result=40 15:54:52 Config A/D Result=40 15:54:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:54:52 Get A/D filter: -9.255963e+061 result=40 15:54:52 Get A/D value=-858993460 result=40 15:54:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:54:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:54:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:54:52 Aux= 15:54:52 Message to Camera, serial 13944 queued 15:55:23 Received message from Master: op=PointingHead serial=13951 15:55:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 15:55:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 15:55:23 Point started: ret=0 15:55:23 point_skyscan result=0 15:55:24 Check angles 15:55:24 SkyScan query 15:55:25 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 15:55:25 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 15:55:25 Check angles 15:55:25 SkyScan query 15:55:25 SkyScan query done: ret=0 az=82.05<-5470 ze=66.495<-7567 Statuses=0009 0008 15:55:25 Msec=750 True Az=82.05 Ze=66.495 Az status=0009 Ze status=0008 15:55:25 Check angles 15:55:25 SkyScan query 15:55:26 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 15:55:26 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 15:55:26 Check angles 15:55:26 SkyScan query 15:55:27 SkyScan query done: ret=0 az=117.015<-7801 ze=66.495<-7567 Statuses=0009 0008 15:55:27 Msec=2250 True Az=117.015 Ze=66.495 Az status=0009 Ze status=0008 15:55:27 Check angles 15:55:27 SkyScan query 15:55:28 SkyScan query done: ret=0 az=134.55<-8970 ze=66.495<-7567 Statuses=0009 0008 15:55:28 Msec=3000 True Az=134.55 Ze=66.495 Az status=0009 Ze status=0008 15:55:28 Check angles 15:55:28 SkyScan query 15:55:28 SkyScan query done: ret=0 az=151.77<-10118 ze=66.495<-7567 Statuses=0009 0008 15:55:28 Msec=3750 True Az=151.77 Ze=66.495 Az status=0009 Ze status=0008 15:55:28 Check angles 15:55:28 SkyScan query 15:55:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 15:55:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 15:55:29 Message to Master queued w/err=0: serial=13951 error=0 15:55:34 Received message from Master: op=Filter serial=13952 15:55:34 Color wheel filter change from 0 to 0 15:55:34 FLIGetFilterPos err=0 currentPosition=0 15:55:34 FLIGetStepsRemaining err=0 RemainingSteps=0 15:55:34 Filter is already there-color wheel unchanged 15:55:34 Received message from Master: op=Shutter serial=13953 15:55:34 Shutter LASER close 15:55:34 Received message from Camera: op=State serial=13955 15:55:34 GetSingleValue result=40 Value=cccccccc 15:55:34 SkyScan query 15:55:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 15:55:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:35 Parameters OK 15:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:35 Set A/D data flow result=40 15:55:35 Set A/D channel type result=40 15:55:35 Set A/D encoding result=40 15:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:35 Set channel filter=0.000000e+000 result=40 15:55:35 Config A/D Result=40 15:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:35 Get A/D filter: -9.255963e+061 result=40 15:55:35 Get A/D value=-858993460 result=40 15:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:55:35 Parameters OK 15:55:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:55:35 Set A/D data flow result=40 15:55:35 Set A/D channel type result=40 15:55:35 Set A/D encoding result=40 15:55:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:55:35 Set channel filter=0.000000e+000 result=40 15:55:35 Config A/D Result=40 15:55:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:55:35 Get A/D filter: -9.255963e+061 result=40 15:55:35 Get A/D value=-858993460 result=40 15:55:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:55:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:55:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:55:35 Aux= 15:55:35 Message to Camera, serial 13955 queued 15:56:06 Received message from Master: op=PointingHead serial=13962 15:56:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 15:56:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 15:56:06 Point started: ret=0 15:56:06 point_skyscan result=0 15:56:07 Check angles 15:56:07 SkyScan query 15:56:07 SkyScan query done: ret=0 az=134.745<-8983 ze=36.33<-9578 Statuses=0009 0009 15:56:07 Msec=0 True Az=134.745 Ze=36.33 Az status=0009 Ze status=0009 15:56:08 Check angles 15:56:08 SkyScan query 15:56:08 SkyScan query done: ret=0 az=116.88<-7792 ze=15.045<-10997 Statuses=0009 0009 15:56:08 Msec=750 True Az=116.88 Ze=15.045 Az status=0009 Ze status=0009 15:56:08 Check angles 15:56:08 SkyScan query 15:56:09 SkyScan query done: ret=0 az=99.51<-6634 ze=-5.925<-12395 Statuses=0009 0009 15:56:09 Msec=1500 True Az=99.51 Ze=-5.925 Az status=0009 Ze status=0009 15:56:09 Check angles 15:56:09 SkyScan query 15:56:10 SkyScan query done: ret=0 az=81.9<-5460 ze=-26.865<-13791 Statuses=0009 0009 15:56:10 Msec=2250 True Az=81.9 Ze=-26.865 Az status=0009 Ze status=0009 15:56:10 Check angles 15:56:10 SkyScan query 15:56:10 SkyScan query done: ret=0 az=64.56<-4304 ze=-38.565<-14571 Statuses=0009 0008 15:56:10 Msec=3000 True Az=64.56 Ze=-38.565 Az status=0009 Ze status=0008 15:56:11 Check angles 15:56:11 SkyScan query 15:56:11 SkyScan query done: ret=0 az=47.115<-3141 ze=-38.535<-14569 Statuses=0009 0008 15:56:11 Msec=3750 True Az=47.115 Ze=-38.535 Az status=0009 Ze status=0008 15:56:11 Check angles 15:56:11 SkyScan query 15:56:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:56:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 15:56:12 Message to Master queued w/err=0: serial=13962 error=0 15:56:17 Received message from Master: op=Filter serial=13963 15:56:17 Color wheel filter change from 0 to 0 15:56:17 FLIGetFilterPos err=0 currentPosition=0 15:56:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:17 Filter is already there-color wheel unchanged 15:56:17 Received message from Master: op=Shutter serial=13964 15:56:17 Shutter LASER close 15:56:17 Received message from Camera: op=State serial=13966 15:56:17 GetSingleValue result=40 Value=cccccccc 15:56:17 SkyScan query 15:56:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 15:56:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:18 Parameters OK 15:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:18 Set A/D data flow result=40 15:56:18 Set A/D channel type result=40 15:56:18 Set A/D encoding result=40 15:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:18 Set channel filter=0.000000e+000 result=40 15:56:18 Config A/D Result=40 15:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:18 Get A/D filter: -9.255963e+061 result=40 15:56:18 Get A/D value=-858993460 result=40 15:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:56:18 Parameters OK 15:56:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:56:18 Set A/D data flow result=40 15:56:18 Set A/D channel type result=40 15:56:18 Set A/D encoding result=40 15:56:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:56:18 Set channel filter=0.000000e+000 result=40 15:56:18 Config A/D Result=40 15:56:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:56:18 Get A/D filter: -9.255963e+061 result=40 15:56:18 Get A/D value=-858993460 result=40 15:56:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:56:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:56:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:56:18 Aux= 15:56:18 Message to Camera, serial 13966 queued 15:56:48 Received message from Master: op=PointingHead serial=13973 15:56:48 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 15:56:48 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 15:56:49 Point started: ret=0 15:56:49 point_skyscan result=0 15:56:50 Check angles 15:56:50 SkyScan query 15:56:50 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.01<-16534 Statuses=0009 0009 15:56:50 Msec=0 True Az=63.72 Ze=-68.01 Az status=0009 Ze status=0009 15:56:50 Check angles 15:56:50 SkyScan query 15:56:51 SkyScan query done: ret=0 az=81.12<-5408 ze=-88.95<-17930 Statuses=0009 0009 15:56:51 Msec=750 True Az=81.12 Ze=-88.95 Az status=0009 Ze status=0009 15:56:51 Check angles 15:56:51 SkyScan query 15:56:52 SkyScan query done: ret=0 az=99<-6600 ze=-110.34<-19356 Statuses=0009 0009 15:56:52 Msec=1500 True Az=99 Ze=-110.34 Az status=0009 Ze status=0009 15:56:52 Check angles 15:56:52 SkyScan query 15:56:52 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.295<-20753 Statuses=0009 0009 15:56:52 Msec=2250 True Az=116.505 Ze=-131.295 Az status=0009 Ze status=0009 15:56:53 Check angles 15:56:53 SkyScan query 15:56:53 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 15:56:53 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 15:56:53 Check angles 15:56:53 SkyScan query 15:56:54 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 15:56:54 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 15:56:54 Message to Master queued w/err=0: serial=13973 error=0 15:56:59 Received message from Master: op=Filter serial=13974 15:56:59 Color wheel filter change from 0 to 0 15:56:59 FLIGetFilterPos err=0 currentPosition=0 15:56:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:56:59 Filter is already there-color wheel unchanged 15:56:59 Received message from Master: op=Shutter serial=13975 15:56:59 Shutter LASER close 15:56:59 Received message from Camera: op=State serial=13977 15:56:59 GetSingleValue result=40 Value=cccccccc 15:56:59 SkyScan query 15:57:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 15:57:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:00 Parameters OK 15:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:00 Set A/D data flow result=40 15:57:00 Set A/D channel type result=40 15:57:00 Set A/D encoding result=40 15:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:00 Set channel filter=0.000000e+000 result=40 15:57:00 Config A/D Result=40 15:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:00 Get A/D filter: -9.255963e+061 result=40 15:57:00 Get A/D value=-858993460 result=40 15:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:00 Parameters OK 15:57:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:00 Set A/D data flow result=40 15:57:00 Set A/D channel type result=40 15:57:00 Set A/D encoding result=40 15:57:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:00 Set channel filter=0.000000e+000 result=40 15:57:00 Config A/D Result=40 15:57:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:00 Get A/D filter: -9.255963e+061 result=40 15:57:00 Get A/D value=-858993460 result=40 15:57:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:00 Aux= 15:57:00 Message to Camera, serial 13977 queued 15:57:31 Received message from Master: op=PointingHead serial=13984 15:57:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 15:57:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 15:57:31 Point started: ret=0 15:57:31 point_skyscan result=0 15:57:32 Check angles 15:57:32 SkyScan query 15:57:32 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 15:57:32 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 15:57:32 Check angles 15:57:32 SkyScan query 15:57:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 15:57:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 15:57:33 Message to Master queued w/err=0: serial=13984 error=0 15:57:38 Received message from Master: op=Filter serial=13985 15:57:38 Color wheel filter change from 0 to 0 15:57:38 FLIGetFilterPos err=0 currentPosition=0 15:57:38 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:38 Filter is already there-color wheel unchanged 15:57:38 Received message from Master: op=Shutter serial=13986 15:57:38 Shutter LASER open 15:57:38 Received message from Camera: op=State serial=13988 15:57:38 GetSingleValue result=40 Value=cccccccc 15:57:38 SkyScan query 15:57:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 15:57:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:39 Parameters OK 15:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:39 Set A/D data flow result=40 15:57:39 Set A/D channel type result=40 15:57:39 Set A/D encoding result=40 15:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:39 Set channel filter=0.000000e+000 result=40 15:57:39 Config A/D Result=40 15:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:39 Get A/D filter: -9.255963e+061 result=40 15:57:39 Get A/D value=-858993460 result=40 15:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:39 Parameters OK 15:57:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:39 Set A/D data flow result=40 15:57:39 Set A/D channel type result=40 15:57:39 Set A/D encoding result=40 15:57:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:39 Set channel filter=0.000000e+000 result=40 15:57:39 Config A/D Result=40 15:57:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:39 Get A/D filter: -9.255963e+061 result=40 15:57:39 Get A/D value=-858993460 result=40 15:57:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:39 Aux= 15:57:39 Message to Camera, serial 13988 queued 15:57:41 Received message from Master: op=Shutter serial=13992 15:57:41 Shutter LASER close 15:57:42 Received message from Master: op=PointingHead serial=13996 15:57:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 15:57:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 15:57:42 Point started: ret=0 15:57:42 point_skyscan result=0 15:57:43 Check angles 15:57:43 SkyScan query 15:57:44 SkyScan query done: ret=0 az=135.885<-9059 ze=-143.415<-21561 Statuses=0009 0009 15:57:44 Msec=0 True Az=135.885 Ze=-143.415 Az status=0009 Ze status=0009 15:57:44 Check angles 15:57:44 SkyScan query 15:57:44 SkyScan query done: ret=0 az=153.39<-10226 ze=-122.475<-20165 Statuses=0009 0009 15:57:44 Msec=750 True Az=153.39 Ze=-122.475 Az status=0009 Ze status=0009 15:57:45 Check angles 15:57:45 SkyScan query 15:57:45 SkyScan query done: ret=0 az=170.82<-11388 ze=-101.535<-18769 Statuses=0009 0009 15:57:45 Msec=1500 True Az=170.82 Ze=-101.535 Az status=0009 Ze status=0009 15:57:45 Check angles 15:57:45 SkyScan query 15:57:46 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.55<-17370 Statuses=0008 0009 15:57:46 Msec=2250 True Az=176.025 Ze=-80.55 Az status=0008 Ze status=0009 15:57:46 Check angles 15:57:46 SkyScan query 15:57:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.61<-15974 Statuses=0008 0009 15:57:47 Msec=3000 True Az=175.995 Ze=-59.61 Az status=0008 Ze status=0009 15:57:47 Check angles 15:57:47 SkyScan query 15:57:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 15:57:47 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 15:57:47 Message to Master queued w/err=0: serial=13996 error=0 15:57:52 Received message from Master: op=Filter serial=13997 15:57:52 Color wheel filter change from 0 to 0 15:57:52 FLIGetFilterPos err=0 currentPosition=0 15:57:52 FLIGetStepsRemaining err=0 RemainingSteps=0 15:57:52 Filter is already there-color wheel unchanged 15:57:53 Received message from Master: op=Shutter serial=13998 15:57:53 Shutter LASER close 15:57:53 Received message from Camera: op=State serial=14000 15:57:53 GetSingleValue result=40 Value=cccccccc 15:57:53 SkyScan query 15:57:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 15:57:53 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:53 Parameters OK 15:57:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:53 Set A/D data flow result=40 15:57:53 Set A/D channel type result=40 15:57:53 Set A/D encoding result=40 15:57:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:53 Set channel filter=0.000000e+000 result=40 15:57:53 Config A/D Result=40 15:57:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:53 Get A/D filter: -9.255963e+061 result=40 15:57:53 Get A/D value=-858993460 result=40 15:57:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:53 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:57:53 Parameters OK 15:57:53 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:57:53 Set A/D data flow result=40 15:57:53 Set A/D channel type result=40 15:57:53 Set A/D encoding result=40 15:57:53 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:57:53 Set channel filter=0.000000e+000 result=40 15:57:53 Config A/D Result=40 15:57:53 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:57:53 Get A/D filter: -9.255963e+061 result=40 15:57:53 Get A/D value=-858993460 result=40 15:57:53 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:57:53 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:57:53 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:57:53 Aux= 15:57:53 Message to Camera, serial 14000 queued 15:58:24 Received message from Master: op=PointingHead serial=14007 15:58:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 15:58:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 15:58:25 Point started: ret=0 15:58:25 point_skyscan result=0 15:58:25 Check angles 15:58:25 SkyScan query 15:58:26 SkyScan query done: ret=0 az=153<-10200 ze=-21.75<-13450 Statuses=0009 0009 15:58:26 Msec=0 True Az=153 Ze=-21.75 Az status=0009 Ze status=0009 15:58:26 Check angles 15:58:26 SkyScan query 15:58:27 SkyScan query done: ret=0 az=135.36<-9024 ze=-0.315<-12021 Statuses=0009 0009 15:58:27 Msec=750 True Az=135.36 Ze=-0.315 Az status=0009 Ze status=0009 15:58:27 Check angles 15:58:27 SkyScan query 15:58:27 SkyScan query done: ret=0 az=118.02<-7868 ze=20.25<-10650 Statuses=0009 0009 15:58:27 Msec=1500 True Az=118.02 Ze=20.25 Az status=0009 Ze status=0009 15:58:28 Check angles 15:58:28 SkyScan query 15:58:28 SkyScan query done: ret=0 az=100.26<-6684 ze=41.565<-9229 Statuses=0009 0009 15:58:28 Msec=2250 True Az=100.26 Ze=41.565 Az status=0009 Ze status=0009 15:58:28 Check angles 15:58:28 SkyScan query 15:58:29 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 15:58:29 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 15:58:29 Check angles 15:58:29 SkyScan query 15:58:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 15:58:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 15:58:30 Message to Master queued w/err=0: serial=14007 error=0 15:58:35 Received message from Master: op=Filter serial=14008 15:58:35 Color wheel filter change from 0 to 0 15:58:35 FLIGetFilterPos err=0 currentPosition=0 15:58:35 FLIGetStepsRemaining err=0 RemainingSteps=0 15:58:35 Filter is already there-color wheel unchanged 15:58:35 Received message from Master: op=Shutter serial=14009 15:58:35 Shutter LASER close 15:58:35 Received message from Camera: op=State serial=14011 15:58:35 GetSingleValue result=40 Value=cccccccc 15:58:35 SkyScan query 15:58:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 15:58:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:35 Parameters OK 15:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:35 Set A/D data flow result=40 15:58:35 Set A/D channel type result=40 15:58:35 Set A/D encoding result=40 15:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:35 Set channel filter=0.000000e+000 result=40 15:58:35 Config A/D Result=40 15:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:35 Get A/D filter: -9.255963e+061 result=40 15:58:35 Get A/D value=-858993460 result=40 15:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:58:35 Parameters OK 15:58:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:58:35 Set A/D data flow result=40 15:58:35 Set A/D channel type result=40 15:58:35 Set A/D encoding result=40 15:58:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:58:35 Set channel filter=0.000000e+000 result=40 15:58:35 Config A/D Result=40 15:58:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:58:35 Get A/D filter: -9.255963e+061 result=40 15:58:35 Get A/D value=-858993460 result=40 15:58:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:58:35 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:58:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:58:35 Aux= 15:58:35 Message to Camera, serial 14011 queued 15:59:06 Received message from Master: op=PointingHead serial=14018 15:59:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 15:59:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 15:59:07 Point started: ret=0 15:59:07 point_skyscan result=0 15:59:07 Check angles 15:59:07 SkyScan query 15:59:08 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 15:59:08 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 15:59:08 Check angles 15:59:08 SkyScan query 15:59:09 SkyScan query done: ret=0 az=126.81<-8454 ze=38.505<-9433 Statuses=0009 0008 15:59:09 Msec=750 True Az=126.81 Ze=38.505 Az status=0009 Ze status=0008 15:59:09 Check angles 15:59:09 SkyScan query 15:59:10 SkyScan query done: ret=0 az=144.27<-9618 ze=38.505<-9433 Statuses=0009 0008 15:59:10 Msec=1500 True Az=144.27 Ze=38.505 Az status=0009 Ze status=0008 15:59:10 Check angles 15:59:10 SkyScan query 15:59:10 SkyScan query done: ret=0 az=162.15<-10810 ze=38.505<-9433 Statuses=0009 0008 15:59:10 Msec=2250 True Az=162.15 Ze=38.505 Az status=0009 Ze status=0008 15:59:10 Check angles 15:59:10 SkyScan query 15:59:11 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 15:59:11 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 15:59:11 Check angles 15:59:11 SkyScan query 15:59:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 15:59:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 15:59:12 Message to Master queued w/err=0: serial=14018 error=0 15:59:17 Received message from Master: op=Filter serial=14019 15:59:17 Color wheel filter change from 0 to 0 15:59:17 FLIGetFilterPos err=0 currentPosition=0 15:59:17 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:17 Filter is already there-color wheel unchanged 15:59:17 Received message from Master: op=Shutter serial=14020 15:59:17 Shutter LASER close 15:59:17 Received message from Camera: op=State serial=14022 15:59:17 GetSingleValue result=40 Value=cccccccc 15:59:17 SkyScan query 15:59:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 15:59:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:18 Parameters OK 15:59:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:18 Set A/D data flow result=40 15:59:18 Set A/D channel type result=40 15:59:18 Set A/D encoding result=40 15:59:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:18 Set channel filter=0.000000e+000 result=40 15:59:18 Config A/D Result=40 15:59:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:18 Get A/D filter: -9.255963e+061 result=40 15:59:18 Get A/D value=-858993460 result=40 15:59:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 15:59:18 Parameters OK 15:59:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 15:59:18 Set A/D data flow result=40 15:59:18 Set A/D channel type result=40 15:59:18 Set A/D encoding result=40 15:59:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 15:59:18 Set channel filter=0.000000e+000 result=40 15:59:18 Config A/D Result=40 15:59:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 15:59:18 Get A/D filter: -9.255963e+061 result=40 15:59:18 Get A/D value=-858993460 result=40 15:59:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 15:59:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 15:59:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 15:59:18 Aux= 15:59:18 Message to Camera, serial 14022 queued 15:59:49 Received message from Master: op=PointingHead serial=14029 15:59:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 15:59:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 15:59:49 Point started: ret=0 15:59:49 point_skyscan result=0 15:59:50 Check angles 15:59:50 SkyScan query 15:59:50 SkyScan query done: ret=0 az=152.76<-10184 ze=8.385<-11441 Statuses=0009 0009 15:59:50 Msec=0 True Az=152.76 Ze=8.385 Az status=0009 Ze status=0009 15:59:50 Check angles 15:59:50 SkyScan query 15:59:51 SkyScan query done: ret=0 az=134.91<-8994 ze=-13.035<-12869 Statuses=0009 0009 15:59:51 Msec=750 True Az=134.91 Ze=-13.035 Az status=0009 Ze status=0009 15:59:51 Check angles 15:59:51 SkyScan query 15:59:52 SkyScan query done: ret=0 az=117.345<-7823 ze=-33.96<-14264 Statuses=0009 0009 15:59:52 Msec=1500 True Az=117.345 Ze=-33.96 Az status=0009 Ze status=0009 15:59:52 Check angles 15:59:52 SkyScan query 15:59:52 SkyScan query done: ret=0 az=100.035<-6669 ze=-51.555<-15437 Statuses=0009 0009 15:59:52 Msec=2250 True Az=100.035 Ze=-51.555 Az status=0009 Ze status=0009 15:59:53 Check angles 15:59:53 SkyScan query 15:59:53 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 15:59:53 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 15:59:53 Check angles 15:59:53 SkyScan query 15:59:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 15:59:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 15:59:54 Message to Master queued w/err=0: serial=14029 error=0 15:59:59 Received message from Master: op=Filter serial=14030 15:59:59 Color wheel filter change from 0 to 0 15:59:59 FLIGetFilterPos err=0 currentPosition=0 15:59:59 FLIGetStepsRemaining err=0 RemainingSteps=0 15:59:59 Filter is already there-color wheel unchanged 15:59:59 Received message from Master: op=Shutter serial=14031 15:59:59 Shutter LASER close 15:59:59 Received message from Camera: op=State serial=14033 15:59:59 GetSingleValue result=40 Value=cccccccc 15:59:59 SkyScan query 16:00:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:00:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:00 Parameters OK 16:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:00 Set A/D data flow result=40 16:00:00 Set A/D channel type result=40 16:00:00 Set A/D encoding result=40 16:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:00 Set channel filter=0.000000e+000 result=40 16:00:00 Config A/D Result=40 16:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:00 Get A/D filter: -9.255963e+061 result=40 16:00:00 Get A/D value=-858993460 result=40 16:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:00 Parameters OK 16:00:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:00 Set A/D data flow result=40 16:00:00 Set A/D channel type result=40 16:00:00 Set A/D encoding result=40 16:00:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:00 Set channel filter=0.000000e+000 result=40 16:00:00 Config A/D Result=40 16:00:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:00 Get A/D filter: -9.255963e+061 result=40 16:00:00 Get A/D value=-858993460 result=40 16:00:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:00 Aux= 16:00:00 Message to Camera, serial 14033 queued 16:00:31 Received message from Master: op=PointingHead serial=14040 16:00:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:00:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:00:31 Point started: ret=0 16:00:31 point_skyscan result=0 16:00:32 Check angles 16:00:32 SkyScan query 16:00:32 SkyScan query done: ret=0 az=109.215<-7281 ze=-81.54<-17436 Statuses=0009 0009 16:00:32 Msec=0 True Az=109.215 Ze=-81.54 Az status=0009 Ze status=0009 16:00:32 Check angles 16:00:32 SkyScan query 16:00:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 16:00:33 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 16:00:33 Check angles 16:00:33 SkyScan query 16:00:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.42<-20228 Statuses=0008 0009 16:00:34 Msec=1500 True Az=112.995 Ze=-123.42 Az status=0008 Ze status=0009 16:00:34 Check angles 16:00:34 SkyScan query 16:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 16:00:35 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 16:00:35 Check angles 16:00:35 SkyScan query 16:00:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.33<-23022 Statuses=0008 0009 16:00:35 Msec=3000 True Az=112.995 Ze=-165.33 Az status=0008 Ze status=0009 16:00:35 Check angles 16:00:35 SkyScan query 16:00:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:00:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:00:36 Message to Master queued w/err=0: serial=14040 error=0 16:00:41 Received message from Master: op=Filter serial=14041 16:00:41 Color wheel filter change from 0 to 0 16:00:41 FLIGetFilterPos err=0 currentPosition=0 16:00:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:41 Filter is already there-color wheel unchanged 16:00:41 Received message from Master: op=Shutter serial=14042 16:00:41 Shutter LASER open 16:00:41 Received message from Camera: op=State serial=14044 16:00:41 GetSingleValue result=40 Value=cccccccc 16:00:41 SkyScan query 16:00:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:00:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:42 Parameters OK 16:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:42 Set A/D data flow result=40 16:00:42 Set A/D channel type result=40 16:00:42 Set A/D encoding result=40 16:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:42 Set channel filter=0.000000e+000 result=40 16:00:42 Config A/D Result=40 16:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:42 Get A/D filter: -9.255963e+061 result=40 16:00:42 Get A/D value=-858993460 result=40 16:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:42 Parameters OK 16:00:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:42 Set A/D data flow result=40 16:00:42 Set A/D channel type result=40 16:00:42 Set A/D encoding result=40 16:00:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:42 Set channel filter=0.000000e+000 result=40 16:00:42 Config A/D Result=40 16:00:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:42 Get A/D filter: -9.255963e+061 result=40 16:00:42 Get A/D value=-858993460 result=40 16:00:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:42 Aux= 16:00:42 Message to Camera, serial 14044 queued 16:00:44 Received message from Master: op=Shutter serial=14048 16:00:44 Shutter LASER close 16:00:45 Received message from Master: op=PointingHead serial=14052 16:00:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:00:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 [UTC 2018-12-4 16:00:45] 16:00:45 Point started: ret=0 16:00:45 point_skyscan result=0 16:00:46 Check angles 16:00:46 SkyScan query 16:00:47 SkyScan query done: ret=0 az=88.245<-5883 ze=155.325<-1645 Statuses=0009 0009 16:00:47 Msec=0 True Az=88.245 Ze=155.325 Az status=0009 Ze status=0009 16:00:47 Check angles 16:00:47 SkyScan query 16:00:47 SkyScan query done: ret=0 az=70.74<-4716 ze=134.31<-3046 Statuses=0009 0009 16:00:47 Msec=750 True Az=70.74 Ze=134.31 Az status=0009 Ze status=0009 16:00:48 Check angles 16:00:48 SkyScan query 16:00:48 SkyScan query done: ret=0 az=52.905<-3527 ze=112.965<-4469 Statuses=0009 0009 16:00:48 Msec=1500 True Az=52.905 Ze=112.965 Az status=0009 Ze status=0009 16:00:48 Check angles 16:00:48 SkyScan query 16:00:49 SkyScan query done: ret=0 az=41.055<-2737 ze=91.98<-5868 Statuses=0009 0009 16:00:49 Msec=2250 True Az=41.055 Ze=91.98 Az status=0009 Ze status=0009 16:00:49 Check angles 16:00:49 SkyScan query 16:00:50 SkyScan query done: ret=0 az=40.995<-2733 ze=71.055<-7263 Statuses=0008 0009 16:00:50 Msec=3000 True Az=40.995 Ze=71.055 Az status=0008 Ze status=0009 16:00:50 Check angles 16:00:50 SkyScan query 16:00:50 SkyScan query done: ret=0 az=40.995<-2733 ze=51.585<-8561 Statuses=0008 0009 16:00:50 Msec=3750 True Az=40.995 Ze=51.585 Az status=0008 Ze status=0009 16:00:51 Check angles 16:00:51 SkyScan query 16:00:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:00:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:00:51 Message to Master queued w/err=0: serial=14052 error=0 16:00:56 Received message from Master: op=Filter serial=14053 16:00:56 Color wheel filter change from 0 to 0 16:00:56 FLIGetFilterPos err=0 currentPosition=0 16:00:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:00:56 Filter is already there-color wheel unchanged 16:00:56 Received message from Master: op=Shutter serial=14054 16:00:56 Shutter LASER close 16:00:56 Received message from Camera: op=State serial=14056 16:00:56 GetSingleValue result=40 Value=cccccccc 16:00:56 SkyScan query 16:00:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:00:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:57 Parameters OK 16:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:57 Set A/D data flow result=40 16:00:57 Set A/D channel type result=40 16:00:57 Set A/D encoding result=40 16:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:57 Set channel filter=0.000000e+000 result=40 16:00:57 Config A/D Result=40 16:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:57 Get A/D filter: -9.255963e+061 result=40 16:00:57 Get A/D value=-858993460 result=40 16:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:00:57 Parameters OK 16:00:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:00:57 Set A/D data flow result=40 16:00:57 Set A/D channel type result=40 16:00:57 Set A/D encoding result=40 16:00:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:00:57 Set channel filter=0.000000e+000 result=40 16:00:57 Config A/D Result=40 16:00:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:00:57 Get A/D filter: -9.255963e+061 result=40 16:00:57 Get A/D value=-858993460 result=40 16:00:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:00:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:00:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:00:57 Aux= 16:00:57 Message to Camera, serial 14056 queued 16:01:28 Received message from Master: op=PointingHead serial=14063 16:01:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:01:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:01:28 Point started: ret=0 16:01:28 point_skyscan result=0 16:01:29 Check angles 16:01:29 SkyScan query 16:01:30 SkyScan query done: ret=0 az=64.455<-4297 ze=66.555<-7563 Statuses=0009 0008 16:01:30 Msec=0 True Az=64.455 Ze=66.555 Az status=0009 Ze status=0008 16:01:30 Check angles 16:01:30 SkyScan query 16:01:30 SkyScan query done: ret=0 az=82.05<-5470 ze=66.495<-7567 Statuses=0009 0008 16:01:30 Msec=750 True Az=82.05 Ze=66.495 Az status=0009 Ze status=0008 16:01:31 Check angles 16:01:31 SkyScan query 16:01:31 SkyScan query done: ret=0 az=99.6<-6640 ze=66.495<-7567 Statuses=0009 0008 16:01:31 Msec=1500 True Az=99.6 Ze=66.495 Az status=0009 Ze status=0008 16:01:31 Check angles 16:01:31 SkyScan query 16:01:32 SkyScan query done: ret=0 az=117.405<-7827 ze=66.495<-7567 Statuses=0009 0008 16:01:32 Msec=2250 True Az=117.405 Ze=66.495 Az status=0009 Ze status=0008 16:01:32 Check angles 16:01:32 SkyScan query 16:01:33 SkyScan query done: ret=0 az=134.91<-8994 ze=66.495<-7567 Statuses=0009 0008 16:01:33 Msec=3000 True Az=134.91 Ze=66.495 Az status=0009 Ze status=0008 16:01:33 Check angles 16:01:33 SkyScan query 16:01:33 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 16:01:33 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 16:01:34 Check angles 16:01:34 SkyScan query 16:01:34 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:01:34 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:01:34 Message to Master queued w/err=0: serial=14063 error=0 16:01:39 Received message from Master: op=Filter serial=14064 16:01:39 Color wheel filter change from 0 to 0 16:01:39 FLIGetFilterPos err=0 currentPosition=0 16:01:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:01:39 Filter is already there-color wheel unchanged 16:01:39 Received message from Master: op=Shutter serial=14065 16:01:39 Shutter LASER close 16:01:39 Received message from Camera: op=State serial=14067 16:01:39 GetSingleValue result=40 Value=cccccccc 16:01:39 SkyScan query 16:01:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:01:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:40 Parameters OK 16:01:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:40 Set A/D data flow result=40 16:01:40 Set A/D channel type result=40 16:01:40 Set A/D encoding result=40 16:01:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:40 Set channel filter=0.000000e+000 result=40 16:01:40 Config A/D Result=40 16:01:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:40 Get A/D filter: -9.255963e+061 result=40 16:01:40 Get A/D value=-858993460 result=40 16:01:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:01:40 Parameters OK 16:01:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:01:40 Set A/D data flow result=40 16:01:40 Set A/D channel type result=40 16:01:40 Set A/D encoding result=40 16:01:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:01:40 Set channel filter=0.000000e+000 result=40 16:01:40 Config A/D Result=40 16:01:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:01:40 Get A/D filter: -9.255963e+061 result=40 16:01:40 Get A/D value=-858993460 result=40 16:01:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:01:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:01:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:01:40 Aux= 16:01:40 Message to Camera, serial 14067 queued 16:02:11 Received message from Master: op=PointingHead serial=14074 16:02:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:02:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:02:11 Point started: ret=0 16:02:11 point_skyscan result=0 16:02:12 Check angles 16:02:12 SkyScan query 16:02:12 SkyScan query done: ret=0 az=135.045<-9003 ze=36.765<-9549 Statuses=0009 0009 16:02:12 Msec=0 True Az=135.045 Ze=36.765 Az status=0009 Ze status=0009 16:02:13 Check angles 16:02:13 SkyScan query 16:02:13 SkyScan query done: ret=0 az=117.555<-7837 ze=15.795<-10947 Statuses=0009 0009 16:02:13 Msec=750 True Az=117.555 Ze=15.795 Az status=0009 Ze status=0009 16:02:13 Check angles 16:02:13 SkyScan query 16:02:14 SkyScan query done: ret=0 az=100.155<-6677 ze=-5.16<-12344 Statuses=0009 0009 16:02:14 Msec=1500 True Az=100.155 Ze=-5.16 Az status=0009 Ze status=0009 16:02:14 Check angles 16:02:14 SkyScan query 16:02:15 SkyScan query done: ret=0 az=82.65<-5510 ze=-26.16<-13744 Statuses=0009 0009 16:02:15 Msec=2250 True Az=82.65 Ze=-26.16 Az status=0009 Ze status=0009 16:02:15 Check angles 16:02:15 SkyScan query 16:02:15 SkyScan query done: ret=0 az=65.16<-4344 ze=-38.565<-14571 Statuses=0009 0008 16:02:15 Msec=3000 True Az=65.16 Ze=-38.565 Az status=0009 Ze status=0008 16:02:16 Check angles 16:02:16 SkyScan query 16:02:16 SkyScan query done: ret=0 az=47.745<-3183 ze=-38.535<-14569 Statuses=0009 0008 16:02:16 Msec=3750 True Az=47.745 Ze=-38.535 Az status=0009 Ze status=0008 16:02:16 Check angles 16:02:16 SkyScan query 16:02:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:02:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:02:17 Message to Master queued w/err=0: serial=14074 error=0 16:02:22 Received message from Master: op=Filter serial=14075 16:02:22 Color wheel filter change from 0 to 0 16:02:22 FLIGetFilterPos err=0 currentPosition=0 16:02:22 FLIGetStepsRemaining err=0 RemainingSteps=0 16:02:22 Filter is already there-color wheel unchanged 16:02:22 Received message from Master: op=Shutter serial=14076 16:02:22 Shutter LASER close 16:02:22 Received message from Camera: op=State serial=14078 16:02:22 GetSingleValue result=40 Value=cccccccc 16:02:22 SkyScan query 16:02:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:02:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:23 Parameters OK 16:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:23 Set A/D data flow result=40 16:02:23 Set A/D channel type result=40 16:02:23 Set A/D encoding result=40 16:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:23 Set channel filter=0.000000e+000 result=40 16:02:23 Config A/D Result=40 16:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:23 Get A/D filter: -9.255963e+061 result=40 16:02:23 Get A/D value=-858993460 result=40 16:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:02:23 Parameters OK 16:02:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:02:23 Set A/D data flow result=40 16:02:23 Set A/D channel type result=40 16:02:23 Set A/D encoding result=40 16:02:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:02:23 Set channel filter=0.000000e+000 result=40 16:02:23 Config A/D Result=40 16:02:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:02:23 Get A/D filter: -9.255963e+061 result=40 16:02:23 Get A/D value=-858993460 result=40 16:02:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:02:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:02:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:02:23 Aux= 16:02:23 Message to Camera, serial 14078 queued 16:02:54 Received message from Master: op=PointingHead serial=14085 16:02:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:02:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:02:54 Point started: ret=0 16:02:54 point_skyscan result=0 16:02:55 Check angles 16:02:55 SkyScan query 16:02:55 SkyScan query done: ret=0 az=64.29<-4286 ze=-68.76<-16584 Statuses=0009 0009 16:02:55 Msec=0 True Az=64.29 Ze=-68.76 Az status=0009 Ze status=0009 16:02:55 Check angles 16:02:55 SkyScan query 16:02:56 SkyScan query done: ret=0 az=81.735<-5449 ze=-89.73<-17982 Statuses=0009 0009 16:02:56 Msec=750 True Az=81.735 Ze=-89.73 Az status=0009 Ze status=0009 16:02:56 Check angles 16:02:56 SkyScan query 16:02:57 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.67<-19378 Statuses=0009 0009 16:02:57 Msec=1500 True Az=99.285 Ze=-110.67 Az status=0009 Ze status=0009 16:02:57 Check angles 16:02:57 SkyScan query 16:02:58 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.64<-20776 Statuses=0009 0009 16:02:58 Msec=2250 True Az=116.76 Ze=-131.64 Az status=0009 Ze status=0009 16:02:58 Check angles 16:02:58 SkyScan query 16:02:58 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0009 0008 16:02:58 Msec=3000 True Az=131.01 Ze=-141.525 Az status=0009 Ze status=0008 16:02:58 Check angles 16:02:58 SkyScan query 16:02:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:02:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:02:59 Message to Master queued w/err=0: serial=14085 error=0 16:03:04 Received message from Master: op=Filter serial=14086 16:03:04 Color wheel filter change from 0 to 0 16:03:04 FLIGetFilterPos err=0 currentPosition=0 16:03:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:04 Filter is already there-color wheel unchanged 16:03:04 Received message from Master: op=Shutter serial=14087 16:03:04 Shutter LASER close 16:03:04 Received message from Camera: op=State serial=14089 16:03:04 GetSingleValue result=40 Value=cccccccc 16:03:04 SkyScan query 16:03:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:03:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:05 Parameters OK 16:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:05 Set A/D data flow result=40 16:03:05 Set A/D channel type result=40 16:03:05 Set A/D encoding result=40 16:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:05 Set channel filter=0.000000e+000 result=40 16:03:05 Config A/D Result=40 16:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:05 Get A/D filter: -9.255963e+061 result=40 16:03:05 Get A/D value=-858993460 result=40 16:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:05 Parameters OK 16:03:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:05 Set A/D data flow result=40 16:03:05 Set A/D channel type result=40 16:03:05 Set A/D encoding result=40 16:03:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:05 Set channel filter=0.000000e+000 result=40 16:03:05 Config A/D Result=40 16:03:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:05 Get A/D filter: -9.255963e+061 result=40 16:03:05 Get A/D value=-858993460 result=40 16:03:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:05 Aux= 16:03:05 Message to Camera, serial 14089 queued 16:03:36 Received message from Master: op=PointingHead serial=14096 16:03:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:03:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:03:36 Point started: ret=0 16:03:36 point_skyscan result=0 16:03:37 Check angles 16:03:37 SkyScan query 16:03:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.285<-23419 Statuses=0009 0009 16:03:37 Msec=0 True Az=113.01 Ze=-171.285 Az status=0009 Ze status=0009 16:03:38 Check angles 16:03:38 SkyScan query 16:03:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:03:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:03:38 Message to Master queued w/err=0: serial=14096 error=0 16:03:43 Received message from Master: op=Filter serial=14097 16:03:43 Color wheel filter change from 0 to 0 16:03:43 FLIGetFilterPos err=0 currentPosition=0 16:03:43 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:43 Filter is already there-color wheel unchanged 16:03:43 Received message from Master: op=Shutter serial=14098 16:03:43 Shutter LASER open 16:03:43 Received message from Camera: op=State serial=14100 16:03:43 GetSingleValue result=40 Value=cccccccc 16:03:43 SkyScan query 16:03:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:03:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:44 Parameters OK 16:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:44 Set A/D data flow result=40 16:03:44 Set A/D channel type result=40 16:03:44 Set A/D encoding result=40 16:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:44 Set channel filter=0.000000e+000 result=40 16:03:44 Config A/D Result=40 16:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:44 Get A/D filter: -9.255963e+061 result=40 16:03:44 Get A/D value=-858993460 result=40 16:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:44 Parameters OK 16:03:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:44 Set A/D data flow result=40 16:03:44 Set A/D channel type result=40 16:03:44 Set A/D encoding result=40 16:03:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:44 Set channel filter=0.000000e+000 result=40 16:03:44 Config A/D Result=40 16:03:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:44 Get A/D filter: -9.255963e+061 result=40 16:03:44 Get A/D value=-858993460 result=40 16:03:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:44 Aux= 16:03:44 Message to Camera, serial 14100 queued 16:03:46 Received message from Master: op=Shutter serial=14104 16:03:46 Shutter LASER close 16:03:47 Received message from Master: op=PointingHead serial=14108 16:03:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:03:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:03:47 Point started: ret=0 16:03:47 point_skyscan result=0 16:03:48 Check angles 16:03:48 SkyScan query 16:03:49 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.34<-21556 Statuses=0009 0009 16:03:49 Msec=0 True Az=135.855 Ze=-143.34 Az status=0009 Ze status=0009 16:03:49 Check angles 16:03:49 SkyScan query 16:03:50 SkyScan query done: ret=0 az=153.66<-10244 ze=-121.95<-20130 Statuses=0009 0009 16:03:50 Msec=750 True Az=153.66 Ze=-121.95 Az status=0009 Ze status=0009 16:03:50 Check angles 16:03:50 SkyScan query 16:03:50 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.025<-18735 Statuses=0009 0009 16:03:50 Msec=1500 True Az=171.075 Ze=-101.025 Az status=0009 Ze status=0009 16:03:50 Check angles 16:03:50 SkyScan query 16:03:51 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 16:03:51 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 16:03:51 Check angles 16:03:51 SkyScan query 16:03:52 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.115<-15941 Statuses=0008 0009 16:03:52 Msec=3000 True Az=176.01 Ze=-59.115 Az status=0008 Ze status=0009 16:03:52 Check angles 16:03:52 SkyScan query 16:03:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:03:53 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:03:53 Message to Master queued w/err=0: serial=14108 error=0 16:03:58 Received message from Master: op=Filter serial=14109 16:03:58 Color wheel filter change from 0 to 0 16:03:58 FLIGetFilterPos err=0 currentPosition=0 16:03:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:03:58 Filter is already there-color wheel unchanged 16:03:58 Received message from Master: op=Shutter serial=14110 16:03:58 Shutter LASER close 16:03:58 Received message from Camera: op=State serial=14112 16:03:58 GetSingleValue result=40 Value=cccccccc 16:03:58 SkyScan query 16:03:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:03:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:58 Parameters OK 16:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:58 Set A/D data flow result=40 16:03:58 Set A/D channel type result=40 16:03:58 Set A/D encoding result=40 16:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:58 Set channel filter=0.000000e+000 result=40 16:03:58 Config A/D Result=40 16:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:58 Get A/D filter: -9.255963e+061 result=40 16:03:58 Get A/D value=-858993460 result=40 16:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:03:58 Parameters OK 16:03:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:03:58 Set A/D data flow result=40 16:03:58 Set A/D channel type result=40 16:03:58 Set A/D encoding result=40 16:03:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:03:58 Set channel filter=0.000000e+000 result=40 16:03:58 Config A/D Result=40 16:03:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:03:58 Get A/D filter: -9.255963e+061 result=40 16:03:58 Get A/D value=-858993460 result=40 16:03:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:03:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:03:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:03:58 Aux= 16:03:58 Message to Camera, serial 14112 queued 16:04:29 Received message from Master: op=PointingHead serial=14119 16:04:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:04:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:04:30 Point started: ret=0 16:04:30 point_skyscan result=0 16:04:31 Check angles 16:04:31 SkyScan query 16:04:31 SkyScan query done: ret=0 az=152.655<-10177 ze=-21.315<-13421 Statuses=0009 0009 16:04:31 Msec=0 True Az=152.655 Ze=-21.315 Az status=0009 Ze status=0009 16:04:31 Check angles 16:04:31 SkyScan query 16:04:32 SkyScan query done: ret=0 az=134.79<-8986 ze=0.105<-11993 Statuses=0009 0009 16:04:32 Msec=750 True Az=134.79 Ze=0.105 Az status=0009 Ze status=0009 16:04:32 Check angles 16:04:32 SkyScan query 16:04:33 SkyScan query done: ret=0 az=117.24<-7816 ze=21.03<-10598 Statuses=0009 0009 16:04:33 Msec=1500 True Az=117.24 Ze=21.03 Az status=0009 Ze status=0009 16:04:33 Check angles 16:04:33 SkyScan query 16:04:33 SkyScan query done: ret=0 az=99.93<-6662 ze=42.015<-9199 Statuses=0009 0009 16:04:33 Msec=2250 True Az=99.93 Ze=42.015 Az status=0009 Ze status=0009 16:04:34 Check angles 16:04:34 SkyScan query 16:04:34 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:04:34 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:04:34 Check angles 16:04:34 SkyScan query 16:04:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:04:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:04:35 Message to Master queued w/err=0: serial=14119 error=0 16:04:40 Received message from Master: op=Filter serial=14120 16:04:40 Color wheel filter change from 0 to 0 16:04:40 FLIGetFilterPos err=0 currentPosition=0 16:04:40 FLIGetStepsRemaining err=0 RemainingSteps=0 16:04:40 Filter is already there-color wheel unchanged 16:04:40 Received message from Master: op=Shutter serial=14121 16:04:40 Shutter LASER close 16:04:40 Received message from Camera: op=State serial=14123 16:04:40 GetSingleValue result=40 Value=cccccccc 16:04:40 SkyScan query 16:04:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:04:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:41 Parameters OK 16:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:41 Set A/D data flow result=40 16:04:41 Set A/D channel type result=40 16:04:41 Set A/D encoding result=40 16:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:41 Set channel filter=0.000000e+000 result=40 16:04:41 Config A/D Result=40 16:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:41 Get A/D filter: -9.255963e+061 result=40 16:04:41 Get A/D value=-858993460 result=40 16:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:04:41 Parameters OK 16:04:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:04:41 Set A/D data flow result=40 16:04:41 Set A/D channel type result=40 16:04:41 Set A/D encoding result=40 16:04:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:04:41 Set channel filter=0.000000e+000 result=40 16:04:41 Config A/D Result=40 16:04:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:04:41 Get A/D filter: -9.255963e+061 result=40 16:04:41 Get A/D value=-858993460 result=40 16:04:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:04:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:04:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:04:41 Aux= 16:04:41 Message to Camera, serial 14123 queued 16:05:12 Received message from Master: op=PointingHead serial=14130 16:05:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:05:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:05:12 Point started: ret=0 16:05:12 point_skyscan result=0 16:05:13 Check angles 16:05:13 SkyScan query 16:05:13 SkyScan query done: ret=0 az=109.215<-7281 ze=38.49<-9434 Statuses=0009 0008 16:05:13 Msec=0 True Az=109.215 Ze=38.49 Az status=0009 Ze status=0008 16:05:13 Check angles 16:05:13 SkyScan query 16:05:14 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 16:05:14 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 16:05:14 Check angles 16:05:14 SkyScan query 16:05:15 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 16:05:15 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 16:05:15 Check angles 16:05:15 SkyScan query 16:05:15 SkyScan query done: ret=0 az=161.94<-10796 ze=38.505<-9433 Statuses=0009 0008 16:05:15 Msec=2250 True Az=161.94 Ze=38.505 Az status=0009 Ze status=0008 16:05:16 Check angles 16:05:16 SkyScan query 16:05:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:05:16 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:05:16 Check angles 16:05:16 SkyScan query 16:05:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:05:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:05:17 Message to Master queued w/err=0: serial=14130 error=0 16:05:22 Received message from Master: op=Filter serial=14131 16:05:22 Color wheel filter change from 0 to 0 16:05:22 FLIGetFilterPos err=0 currentPosition=0 16:05:22 FLIGetStepsRemaining err=0 RemainingSteps=0 16:05:22 Filter is already there-color wheel unchanged 16:05:22 Received message from Master: op=Shutter serial=14132 16:05:22 Shutter LASER close 16:05:22 Received message from Camera: op=State serial=14134 16:05:22 GetSingleValue result=40 Value=cccccccc 16:05:22 SkyScan query 16:05:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:05:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:23 Parameters OK 16:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:23 Set A/D data flow result=40 16:05:23 Set A/D channel type result=40 16:05:23 Set A/D encoding result=40 16:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:23 Set channel filter=0.000000e+000 result=40 16:05:23 Config A/D Result=40 16:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:23 Get A/D filter: -9.255963e+061 result=40 16:05:23 Get A/D value=-858993460 result=40 16:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:05:23 Parameters OK 16:05:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:05:23 Set A/D data flow result=40 16:05:23 Set A/D channel type result=40 16:05:23 Set A/D encoding result=40 16:05:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:05:23 Set channel filter=0.000000e+000 result=40 16:05:23 Config A/D Result=40 16:05:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:05:23 Get A/D filter: -9.255963e+061 result=40 16:05:23 Get A/D value=-858993460 result=40 16:05:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:05:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:05:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:05:23 Aux= 16:05:23 Message to Camera, serial 14134 queued 16:05:54 Received message from Master: op=PointingHead serial=14141 16:05:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:05:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:05:54 Point started: ret=0 16:05:54 point_skyscan result=0 16:05:55 Check angles 16:05:55 SkyScan query 16:05:55 SkyScan query done: ret=0 az=152.79<-10186 ze=8.49<-11434 Statuses=0009 0009 16:05:55 Msec=0 True Az=152.79 Ze=8.49 Az status=0009 Ze status=0009 16:05:55 Check angles 16:05:55 SkyScan query 16:05:56 SkyScan query done: ret=0 az=135.405<-9027 ze=-12.45<-12830 Statuses=0009 0009 16:05:56 Msec=750 True Az=135.405 Ze=-12.45 Az status=0009 Ze status=0009 16:05:56 Check angles 16:05:56 SkyScan query 16:05:57 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.405<-14227 Statuses=0009 0009 16:05:57 Msec=1500 True Az=117.825 Ze=-33.405 Az status=0009 Ze status=0009 16:05:57 Check angles 16:05:57 SkyScan query 16:05:58 SkyScan query done: ret=0 az=100.44<-6696 ze=-51.54<-15436 Statuses=0009 0009 16:05:58 Msec=2250 True Az=100.44 Ze=-51.54 Az status=0009 Ze status=0009 16:05:58 Check angles 16:05:58 SkyScan query 16:05:58 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 16:05:58 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 16:05:58 Check angles 16:05:58 SkyScan query 16:05:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:05:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:05:59 Message to Master queued w/err=0: serial=14141 error=0 16:06:04 Received message from Master: op=Filter serial=14142 16:06:04 Color wheel filter change from 0 to 0 16:06:04 FLIGetFilterPos err=0 currentPosition=0 16:06:04 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:04 Filter is already there-color wheel unchanged 16:06:04 Received message from Master: op=Shutter serial=14143 16:06:04 Shutter LASER close 16:06:04 Received message from Camera: op=State serial=14145 16:06:04 GetSingleValue result=40 Value=cccccccc 16:06:04 SkyScan query 16:06:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:06:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:05 Parameters OK 16:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:05 Set A/D data flow result=40 16:06:05 Set A/D channel type result=40 16:06:05 Set A/D encoding result=40 16:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:05 Set channel filter=0.000000e+000 result=40 16:06:05 Config A/D Result=40 16:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:05 Get A/D filter: -9.255963e+061 result=40 16:06:05 Get A/D value=-858993460 result=40 16:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:05 Parameters OK 16:06:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:05 Set A/D data flow result=40 16:06:05 Set A/D channel type result=40 16:06:05 Set A/D encoding result=40 16:06:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:05 Set channel filter=0.000000e+000 result=40 16:06:05 Config A/D Result=40 16:06:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:05 Get A/D filter: -9.255963e+061 result=40 16:06:05 Get A/D value=-858993460 result=40 16:06:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:05 Aux= 16:06:05 Message to Camera, serial 14145 queued 16:06:36 Received message from Master: op=PointingHead serial=14152 16:06:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:06:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:06:36 Point started: ret=0 16:06:36 point_skyscan result=0 16:06:37 Check angles 16:06:37 SkyScan query 16:06:37 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.735<-17449 Statuses=0009 0009 16:06:37 Msec=0 True Az=109.38 Ze=-81.735 Az status=0009 Ze status=0009 16:06:38 Check angles 16:06:38 SkyScan query 16:06:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-103.065<-18871 Statuses=0008 0009 16:06:38 Msec=750 True Az=112.995 Ze=-103.065 Az status=0008 Ze status=0009 16:06:38 Check angles 16:06:38 SkyScan query 16:06:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.005<-20267 Statuses=0008 0009 16:06:39 Msec=1500 True Az=112.995 Ze=-124.005 Az status=0008 Ze status=0009 16:06:39 Check angles 16:06:39 SkyScan query 16:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.975<-21665 Statuses=0008 0009 16:06:40 Msec=2250 True Az=112.995 Ze=-144.975 Az status=0008 Ze status=0009 16:06:40 Check angles 16:06:40 SkyScan query 16:06:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.885<-23059 Statuses=0008 0009 16:06:40 Msec=3000 True Az=112.995 Ze=-165.885 Az status=0008 Ze status=0009 16:06:41 Check angles 16:06:41 SkyScan query 16:06:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:06:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:06:41 Message to Master queued w/err=0: serial=14152 error=0 16:06:46 Received message from Master: op=Filter serial=14153 16:06:46 Color wheel filter change from 0 to 0 16:06:46 FLIGetFilterPos err=0 currentPosition=0 16:06:46 FLIGetStepsRemaining err=0 RemainingSteps=0 16:06:46 Filter is already there-color wheel unchanged 16:06:46 Received message from Master: op=Shutter serial=14154 16:06:46 Shutter LASER open 16:06:46 Received message from Camera: op=State serial=14156 16:06:46 GetSingleValue result=40 Value=cccccccc 16:06:46 SkyScan query 16:06:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:06:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:47 Parameters OK 16:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:47 Set A/D data flow result=40 16:06:47 Set A/D channel type result=40 16:06:47 Set A/D encoding result=40 16:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:47 Set channel filter=0.000000e+000 result=40 16:06:47 Config A/D Result=40 16:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:47 Get A/D filter: -9.255963e+061 result=40 16:06:47 Get A/D value=-858993460 result=40 16:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:06:47 Parameters OK 16:06:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:06:47 Set A/D data flow result=40 16:06:47 Set A/D channel type result=40 16:06:47 Set A/D encoding result=40 16:06:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:06:47 Set channel filter=0.000000e+000 result=40 16:06:47 Config A/D Result=40 16:06:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:06:47 Get A/D filter: -9.255963e+061 result=40 16:06:47 Get A/D value=-858993460 result=40 16:06:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:06:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:06:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:06:47 Aux= 16:06:47 Message to Camera, serial 14156 queued 16:06:49 Received message from Master: op=Shutter serial=14160 16:06:49 Shutter LASER close 16:06:50 Received message from Master: op=PointingHead serial=14164 16:06:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:06:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:06:50 Point started: ret=0 16:06:50 point_skyscan result=0 16:06:51 Check angles 16:06:51 SkyScan query 16:06:52 SkyScan query done: ret=0 az=90.06<-6004 ze=157.47<-1502 Statuses=0009 0009 16:06:52 Msec=0 True Az=90.06 Ze=157.47 Az status=0009 Ze status=0009 16:06:52 Check angles 16:06:52 SkyScan query 16:06:52 SkyScan query done: ret=0 az=72.105<-4807 ze=135.99<-2934 Statuses=0009 0009 16:06:52 Msec=750 True Az=72.105 Ze=135.99 Az status=0009 Ze status=0009 16:06:53 Check angles 16:06:53 SkyScan query 16:06:53 SkyScan query done: ret=0 az=54.585<-3639 ze=114.72<-4352 Statuses=0009 0009 16:06:53 Msec=1500 True Az=54.585 Ze=114.72 Az status=0009 Ze status=0009 16:06:53 Check angles 16:06:53 SkyScan query 16:06:54 SkyScan query done: ret=0 az=40.92<-2728 ze=93.735<-5751 Statuses=0009 0009 16:06:54 Msec=2250 True Az=40.92 Ze=93.735 Az status=0009 Ze status=0009 16:06:54 Check angles 16:06:54 SkyScan query 16:06:55 SkyScan query done: ret=0 az=40.995<-2733 ze=72.795<-7147 Statuses=0008 0009 16:06:55 Msec=3000 True Az=40.995 Ze=72.795 Az status=0008 Ze status=0009 16:06:55 Check angles 16:06:55 SkyScan query 16:06:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.455<-8503 Statuses=0008 0009 16:06:55 Msec=3750 True Az=40.995 Ze=52.455 Az status=0008 Ze status=0009 16:06:56 Check angles 16:06:56 SkyScan query 16:06:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:06:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:06:56 Message to Master queued w/err=0: serial=14164 error=0 16:07:01 Received message from Master: op=Filter serial=14165 16:07:01 Color wheel filter change from 0 to 0 16:07:01 FLIGetFilterPos err=0 currentPosition=0 16:07:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:01 Filter is already there-color wheel unchanged 16:07:01 Received message from Master: op=Shutter serial=14166 16:07:01 Shutter LASER close 16:07:01 Received message from Camera: op=State serial=14168 16:07:01 GetSingleValue result=40 Value=cccccccc 16:07:01 SkyScan query 16:07:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:07:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:02 Parameters OK 16:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:02 Set A/D data flow result=40 16:07:02 Set A/D channel type result=40 16:07:02 Set A/D encoding result=40 16:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:02 Set channel filter=0.000000e+000 result=40 16:07:02 Config A/D Result=40 16:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:02 Get A/D filter: -9.255963e+061 result=40 16:07:02 Get A/D value=-858993460 result=40 16:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:02 Parameters OK 16:07:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:02 Set A/D data flow result=40 16:07:02 Set A/D channel type result=40 16:07:02 Set A/D encoding result=40 16:07:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:02 Set channel filter=0.000000e+000 result=40 16:07:02 Config A/D Result=40 16:07:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:02 Get A/D filter: -9.255963e+061 result=40 16:07:02 Get A/D value=-858993460 result=40 16:07:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:02 Aux= 16:07:02 Message to Camera, serial 14168 queued 16:07:33 Received message from Master: op=PointingHead serial=14175 16:07:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:07:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:07:33 Point started: ret=0 16:07:33 point_skyscan result=0 16:07:34 Check angles 16:07:34 SkyScan query 16:07:35 SkyScan query done: ret=0 az=63.75<-4250 ze=66.555<-7563 Statuses=0009 0008 16:07:35 Msec=0 True Az=63.75 Ze=66.555 Az status=0009 Ze status=0008 16:07:35 Check angles 16:07:35 SkyScan query 16:07:35 SkyScan query done: ret=0 az=81.165<-5411 ze=66.495<-7567 Statuses=0009 0008 16:07:35 Msec=750 True Az=81.165 Ze=66.495 Az status=0009 Ze status=0008 16:07:35 Check angles 16:07:35 SkyScan query 16:07:36 SkyScan query done: ret=0 az=98.88<-6592 ze=66.495<-7567 Statuses=0009 0008 16:07:36 Msec=1500 True Az=98.88 Ze=66.495 Az status=0009 Ze status=0008 16:07:36 Check angles 16:07:36 SkyScan query 16:07:37 SkyScan query done: ret=0 az=116.295<-7753 ze=66.495<-7567 Statuses=0009 0008 16:07:37 Msec=2250 True Az=116.295 Ze=66.495 Az status=0009 Ze status=0008 16:07:37 Check angles 16:07:37 SkyScan query 16:07:38 SkyScan query done: ret=0 az=133.68<-8912 ze=66.495<-7567 Statuses=0009 0008 16:07:38 Msec=3000 True Az=133.68 Ze=66.495 Az status=0009 Ze status=0008 16:07:38 Check angles 16:07:38 SkyScan query 16:07:38 SkyScan query done: ret=0 az=151.095<-10073 ze=66.495<-7567 Statuses=0009 0008 16:07:38 Msec=3750 True Az=151.095 Ze=66.495 Az status=0009 Ze status=0008 16:07:38 Check angles 16:07:38 SkyScan query 16:07:39 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:07:39 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:07:39 Message to Master queued w/err=0: serial=14175 error=0 16:07:44 Received message from Master: op=Filter serial=14176 16:07:44 Color wheel filter change from 0 to 0 16:07:44 FLIGetFilterPos err=0 currentPosition=0 16:07:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:07:44 Filter is already there-color wheel unchanged 16:07:44 Received message from Master: op=Shutter serial=14177 16:07:44 Shutter LASER close 16:07:44 Received message from Camera: op=State serial=14179 16:07:44 GetSingleValue result=40 Value=cccccccc 16:07:44 SkyScan query 16:07:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:07:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:45 Parameters OK 16:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:45 Set A/D data flow result=40 16:07:45 Set A/D channel type result=40 16:07:45 Set A/D encoding result=40 16:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:45 Set channel filter=0.000000e+000 result=40 16:07:45 Config A/D Result=40 16:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:45 Get A/D filter: -9.255963e+061 result=40 16:07:45 Get A/D value=-858993460 result=40 16:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:07:45 Parameters OK 16:07:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:07:45 Set A/D data flow result=40 16:07:45 Set A/D channel type result=40 16:07:45 Set A/D encoding result=40 16:07:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:07:45 Set channel filter=0.000000e+000 result=40 16:07:45 Config A/D Result=40 16:07:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:07:45 Get A/D filter: -9.255963e+061 result=40 16:07:45 Get A/D value=-858993460 result=40 16:07:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:07:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:07:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:07:45 Aux= 16:07:45 Message to Camera, serial 14179 queued 16:08:16 Received message from Master: op=PointingHead serial=14186 16:08:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:08:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:08:16 Point started: ret=0 16:08:16 point_skyscan result=0 16:08:17 Check angles 16:08:17 SkyScan query 16:08:17 SkyScan query done: ret=0 az=134.745<-8983 ze=36.36<-9576 Statuses=0009 0009 16:08:17 Msec=0 True Az=134.745 Ze=36.36 Az status=0009 Ze status=0009 16:08:18 Check angles 16:08:18 SkyScan query 16:08:18 SkyScan query done: ret=0 az=117.225<-7815 ze=15.465<-10969 Statuses=0009 0009 16:08:18 Msec=750 True Az=117.225 Ze=15.465 Az status=0009 Ze status=0009 16:08:18 Check angles 16:08:18 SkyScan query 16:08:19 SkyScan query done: ret=0 az=99.9<-6660 ze=-5.505<-12367 Statuses=0009 0009 16:08:19 Msec=1500 True Az=99.9 Ze=-5.505 Az status=0009 Ze status=0009 16:08:19 Check angles 16:08:19 SkyScan query 16:08:20 SkyScan query done: ret=0 az=82.26<-5484 ze=-26.46<-13764 Statuses=0009 0009 16:08:20 Msec=2250 True Az=82.26 Ze=-26.46 Az status=0009 Ze status=0009 16:08:20 Check angles 16:08:20 SkyScan query 16:08:20 SkyScan query done: ret=0 az=64.89<-4326 ze=-38.565<-14571 Statuses=0009 0008 16:08:20 Msec=3000 True Az=64.89 Ze=-38.565 Az status=0009 Ze status=0008 16:08:21 Check angles 16:08:21 SkyScan query 16:08:21 SkyScan query done: ret=0 az=47.445<-3163 ze=-38.535<-14569 Statuses=0009 0008 16:08:21 Msec=3750 True Az=47.445 Ze=-38.535 Az status=0009 Ze status=0008 16:08:21 Check angles 16:08:21 SkyScan query 16:08:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:08:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:08:22 Message to Master queued w/err=0: serial=14186 error=0 16:08:27 Received message from Master: op=Filter serial=14187 16:08:27 Color wheel filter change from 0 to 0 16:08:27 FLIGetFilterPos err=0 currentPosition=0 16:08:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:08:27 Filter is already there-color wheel unchanged 16:08:27 Received message from Master: op=Shutter serial=14188 16:08:27 Shutter LASER close 16:08:27 Received message from Camera: op=State serial=14190 16:08:27 GetSingleValue result=40 Value=cccccccc 16:08:27 SkyScan query 16:08:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:08:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:28 Parameters OK 16:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:28 Set A/D data flow result=40 16:08:28 Set A/D channel type result=40 16:08:28 Set A/D encoding result=40 16:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:28 Set channel filter=0.000000e+000 result=40 16:08:28 Config A/D Result=40 16:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:28 Get A/D filter: -9.255963e+061 result=40 16:08:28 Get A/D value=-858993460 result=40 16:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:08:28 Parameters OK 16:08:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:08:28 Set A/D data flow result=40 16:08:28 Set A/D channel type result=40 16:08:28 Set A/D encoding result=40 16:08:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:08:28 Set channel filter=0.000000e+000 result=40 16:08:28 Config A/D Result=40 16:08:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:08:28 Get A/D filter: -9.255963e+061 result=40 16:08:28 Get A/D value=-858993460 result=40 16:08:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:08:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:08:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:08:28 Aux= 16:08:28 Message to Camera, serial 14190 queued 16:08:58 Received message from Master: op=PointingHead serial=14197 16:08:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:08:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:08:59 Point started: ret=0 16:08:59 point_skyscan result=0 16:09:00 Check angles 16:09:00 SkyScan query 16:09:00 SkyScan query done: ret=0 az=63.72<-4248 ze=-68.085<-16539 Statuses=0009 0009 16:09:00 Msec=0 True Az=63.72 Ze=-68.085 Az status=0009 Ze status=0009 16:09:00 Check angles 16:09:00 SkyScan query 16:09:01 SkyScan query done: ret=0 az=81.645<-5443 ze=-89.46<-17964 Statuses=0009 0009 16:09:01 Msec=750 True Az=81.645 Ze=-89.46 Az status=0009 Ze status=0009 16:09:01 Check angles 16:09:01 SkyScan query 16:09:02 SkyScan query done: ret=0 az=99.06<-6604 ze=-110.415<-19361 Statuses=0009 0009 16:09:02 Msec=1500 True Az=99.06 Ze=-110.415 Az status=0009 Ze status=0009 16:09:02 Check angles 16:09:02 SkyScan query 16:09:02 SkyScan query done: ret=0 az=116.58<-7772 ze=-131.34<-20756 Statuses=0009 0009 16:09:02 Msec=2250 True Az=116.58 Ze=-131.34 Az status=0009 Ze status=0009 16:09:03 Check angles 16:09:03 SkyScan query 16:09:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 16:09:03 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 16:09:03 Check angles 16:09:03 SkyScan query 16:09:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:09:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:09:04 Message to Master queued w/err=0: serial=14197 error=0 16:09:09 Received message from Master: op=Filter serial=14198 16:09:09 Color wheel filter change from 0 to 0 16:09:09 FLIGetFilterPos err=0 currentPosition=0 16:09:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:09 Filter is already there-color wheel unchanged 16:09:09 Received message from Master: op=Shutter serial=14199 16:09:09 Shutter LASER close 16:09:09 Received message from Camera: op=State serial=14201 16:09:09 GetSingleValue result=40 Value=cccccccc 16:09:09 SkyScan query 16:09:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:09:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:10 Parameters OK 16:09:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:10 Set A/D data flow result=40 16:09:10 Set A/D channel type result=40 16:09:10 Set A/D encoding result=40 16:09:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:10 Set channel filter=0.000000e+000 result=40 16:09:10 Config A/D Result=40 16:09:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:10 Get A/D filter: -9.255963e+061 result=40 16:09:10 Get A/D value=-858993460 result=40 16:09:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:10 Parameters OK 16:09:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:10 Set A/D data flow result=40 16:09:10 Set A/D channel type result=40 16:09:10 Set A/D encoding result=40 16:09:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:10 Set channel filter=0.000000e+000 result=40 16:09:10 Config A/D Result=40 16:09:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:10 Get A/D filter: -9.255963e+061 result=40 16:09:10 Get A/D value=-858993460 result=40 16:09:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 [UTC 2018-12-4 16:09:10] 16:09:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:10 Aux= 16:09:10 Message to Camera, serial 14201 queued 16:09:41 Received message from Master: op=PointingHead serial=14208 16:09:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:09:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:09:41 Point started: ret=0 16:09:41 point_skyscan result=0 16:09:42 Check angles 16:09:42 SkyScan query 16:09:42 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.36<-23424 Statuses=0009 0009 16:09:42 Msec=0 True Az=113.01 Ze=-171.36 Az status=0009 Ze status=0009 16:09:42 Check angles 16:09:42 SkyScan query 16:09:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:09:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:09:43 Message to Master queued w/err=0: serial=14208 error=0 16:09:48 Received message from Master: op=Filter serial=14209 16:09:48 Color wheel filter change from 0 to 0 16:09:48 FLIGetFilterPos err=0 currentPosition=0 16:09:48 FLIGetStepsRemaining err=0 RemainingSteps=0 16:09:48 Filter is already there-color wheel unchanged 16:09:48 Received message from Master: op=Shutter serial=14210 16:09:48 Shutter LASER open 16:09:48 Received message from Camera: op=State serial=14212 16:09:48 GetSingleValue result=40 Value=cccccccc 16:09:48 SkyScan query 16:09:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:09:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:49 Parameters OK 16:09:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:49 Set A/D data flow result=40 16:09:49 Set A/D channel type result=40 16:09:49 Set A/D encoding result=40 16:09:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:49 Set channel filter=0.000000e+000 result=40 16:09:49 Config A/D Result=40 16:09:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:49 Get A/D filter: -9.255963e+061 result=40 16:09:49 Get A/D value=-858993460 result=40 16:09:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:09:49 Parameters OK 16:09:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:09:49 Set A/D data flow result=40 16:09:49 Set A/D channel type result=40 16:09:49 Set A/D encoding result=40 16:09:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:09:49 Set channel filter=0.000000e+000 result=40 16:09:49 Config A/D Result=40 16:09:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:09:49 Get A/D filter: -9.255963e+061 result=40 16:09:49 Get A/D value=-858993460 result=40 16:09:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:09:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:09:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:09:49 Aux= 16:09:49 Message to Camera, serial 14212 queued 16:09:51 Received message from Master: op=Shutter serial=14216 16:09:51 Shutter LASER close 16:09:52 Received message from Master: op=PointingHead serial=14220 16:09:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:09:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:09:52 Point started: ret=0 16:09:52 point_skyscan result=0 16:09:53 Check angles 16:09:53 SkyScan query 16:09:54 SkyScan query done: ret=0 az=136.155<-9077 ze=-143.19<-21546 Statuses=0009 0009 16:09:54 Msec=0 True Az=136.155 Ze=-143.19 Az status=0009 Ze status=0009 16:09:54 Check angles 16:09:54 SkyScan query 16:09:54 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.205<-20147 Statuses=0009 0009 16:09:54 Msec=750 True Az=153.615 Ze=-122.205 Az status=0009 Ze status=0009 16:09:55 Check angles 16:09:55 SkyScan query 16:09:55 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.325<-18755 Statuses=0009 0009 16:09:55 Msec=1500 True Az=171.045 Ze=-101.325 Az status=0009 Ze status=0009 16:09:55 Check angles 16:09:55 SkyScan query 16:09:56 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.34<-17356 Statuses=0008 0009 16:09:56 Msec=2250 True Az=176.025 Ze=-80.34 Az status=0008 Ze status=0009 16:09:56 Check angles 16:09:56 SkyScan query 16:09:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.4<-15960 Statuses=0008 0009 16:09:57 Msec=3000 True Az=175.995 Ze=-59.4 Az status=0008 Ze status=0009 16:09:57 Check angles 16:09:57 SkyScan query 16:09:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:09:57 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:09:57 Message to Master queued w/err=0: serial=14220 error=0 16:10:02 Received message from Master: op=Filter serial=14221 16:10:02 Color wheel filter change from 0 to 0 16:10:02 FLIGetFilterPos err=0 currentPosition=0 16:10:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:02 Filter is already there-color wheel unchanged 16:10:03 Received message from Master: op=Shutter serial=14222 16:10:03 Shutter LASER close 16:10:03 Received message from Camera: op=State serial=14224 16:10:03 GetSingleValue result=40 Value=cccccccc 16:10:03 SkyScan query 16:10:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:10:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:03 Parameters OK 16:10:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:03 Set A/D data flow result=40 16:10:03 Set A/D channel type result=40 16:10:03 Set A/D encoding result=40 16:10:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:03 Set channel filter=0.000000e+000 result=40 16:10:03 Config A/D Result=40 16:10:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:03 Get A/D filter: -9.255963e+061 result=40 16:10:03 Get A/D value=-858993460 result=40 16:10:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:03 Parameters OK 16:10:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:03 Set A/D data flow result=40 16:10:03 Set A/D channel type result=40 16:10:03 Set A/D encoding result=40 16:10:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:03 Set channel filter=0.000000e+000 result=40 16:10:03 Config A/D Result=40 16:10:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:03 Get A/D filter: -9.255963e+061 result=40 16:10:03 Get A/D value=-858993460 result=40 16:10:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:03 Aux= 16:10:03 Message to Camera, serial 14224 queued 16:10:34 Received message from Master: op=PointingHead serial=14231 16:10:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:10:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:10:35 Point started: ret=0 16:10:35 point_skyscan result=0 16:10:35 Check angles 16:10:35 SkyScan query 16:10:36 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.75<-13450 Statuses=0009 0009 16:10:36 Msec=0 True Az=152.985 Ze=-21.75 Az status=0009 Ze status=0009 16:10:36 Check angles 16:10:36 SkyScan query 16:10:37 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.315<-12021 Statuses=0009 0009 16:10:37 Msec=750 True Az=135.12 Ze=-0.315 Az status=0009 Ze status=0009 16:10:37 Check angles 16:10:37 SkyScan query 16:10:37 SkyScan query done: ret=0 az=117.255<-7817 ze=21.045<-10597 Statuses=0009 0009 16:10:37 Msec=1500 True Az=117.255 Ze=21.045 Az status=0009 Ze status=0009 16:10:38 Check angles 16:10:38 SkyScan query 16:10:38 SkyScan query done: ret=0 az=99.84<-6656 ze=42.03<-9198 Statuses=0009 0009 16:10:38 Msec=2250 True Az=99.84 Ze=42.03 Az status=0009 Ze status=0009 16:10:38 Check angles 16:10:38 SkyScan query 16:10:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 16:10:39 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 16:10:39 Check angles 16:10:39 SkyScan query 16:10:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:10:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:10:40 Message to Master queued w/err=0: serial=14231 error=0 16:10:45 Received message from Master: op=Filter serial=14232 16:10:45 Color wheel filter change from 0 to 0 16:10:45 FLIGetFilterPos err=0 currentPosition=0 16:10:45 FLIGetStepsRemaining err=0 RemainingSteps=0 16:10:45 Filter is already there-color wheel unchanged 16:10:45 Received message from Master: op=Shutter serial=14233 16:10:45 Shutter LASER close 16:10:45 Received message from Camera: op=State serial=14235 16:10:45 GetSingleValue result=40 Value=cccccccc 16:10:45 SkyScan query 16:10:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:10:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:45 Parameters OK 16:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:45 Set A/D data flow result=40 16:10:45 Set A/D channel type result=40 16:10:45 Set A/D encoding result=40 16:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:45 Set channel filter=0.000000e+000 result=40 16:10:45 Config A/D Result=40 16:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:45 Get A/D filter: -9.255963e+061 result=40 16:10:45 Get A/D value=-858993460 result=40 16:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:10:45 Parameters OK 16:10:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:10:45 Set A/D data flow result=40 16:10:45 Set A/D channel type result=40 16:10:45 Set A/D encoding result=40 16:10:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:10:45 Set channel filter=0.000000e+000 result=40 16:10:45 Config A/D Result=40 16:10:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:10:45 Get A/D filter: -9.255963e+061 result=40 16:10:45 Get A/D value=-858993460 result=40 16:10:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:10:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:10:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:10:45 Aux= 16:10:45 Message to Camera, serial 14235 queued 16:11:16 Received message from Master: op=PointingHead serial=14242 16:11:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:11:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:11:17 Point started: ret=0 16:11:17 point_skyscan result=0 16:11:17 Check angles 16:11:17 SkyScan query 16:11:18 SkyScan query done: ret=0 az=108.975<-7265 ze=38.49<-9434 Statuses=0009 0008 16:11:18 Msec=0 True Az=108.975 Ze=38.49 Az status=0009 Ze status=0008 16:11:18 Check angles 16:11:18 SkyScan query 16:11:19 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 16:11:19 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 16:11:19 Check angles 16:11:19 SkyScan query 16:11:20 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 16:11:20 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 16:11:20 Check angles 16:11:20 SkyScan query 16:11:20 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 16:11:20 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 16:11:20 Check angles 16:11:20 SkyScan query 16:11:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:11:21 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:11:21 Check angles 16:11:21 SkyScan query 16:11:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:11:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:11:22 Message to Master queued w/err=0: serial=14242 error=0 16:11:27 Received message from Master: op=Filter serial=14243 16:11:27 Color wheel filter change from 0 to 0 16:11:27 FLIGetFilterPos err=0 currentPosition=0 16:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 16:11:27 Filter is already there-color wheel unchanged 16:11:27 Received message from Master: op=Shutter serial=14244 16:11:27 Shutter LASER close 16:11:27 Received message from Camera: op=State serial=14246 16:11:27 GetSingleValue result=40 Value=cccccccc 16:11:27 SkyScan query 16:11:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:28 Parameters OK 16:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:28 Set A/D data flow result=40 16:11:28 Set A/D channel type result=40 16:11:28 Set A/D encoding result=40 16:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:28 Set channel filter=0.000000e+000 result=40 16:11:28 Config A/D Result=40 16:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:28 Get A/D filter: -9.255963e+061 result=40 16:11:28 Get A/D value=-858993460 result=40 16:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:11:28 Parameters OK 16:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:11:28 Set A/D data flow result=40 16:11:28 Set A/D channel type result=40 16:11:28 Set A/D encoding result=40 16:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:11:28 Set channel filter=0.000000e+000 result=40 16:11:28 Config A/D Result=40 16:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:11:28 Get A/D filter: -9.255963e+061 result=40 16:11:28 Get A/D value=-858993460 result=40 16:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:11:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:11:28 Aux= 16:11:28 Message to Camera, serial 14246 queued 16:11:58 Received message from Master: op=PointingHead serial=14253 16:11:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:11:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:11:59 Point started: ret=0 16:11:59 point_skyscan result=0 16:12:00 Check angles 16:12:00 SkyScan query 16:12:00 SkyScan query done: ret=0 az=153.18<-10212 ze=8.88<-11408 Statuses=0009 0009 16:12:00 Msec=0 True Az=153.18 Ze=8.88 Az status=0009 Ze status=0009 16:12:00 Check angles 16:12:00 SkyScan query 16:12:01 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.495<-12833 Statuses=0009 0009 16:12:01 Msec=750 True Az=135.39 Ze=-12.495 Az status=0009 Ze status=0009 16:12:01 Check angles 16:12:01 SkyScan query 16:12:02 SkyScan query done: ret=0 az=117.705<-7847 ze=-33.42<-14228 Statuses=0009 0009 16:12:02 Msec=1500 True Az=117.705 Ze=-33.42 Az status=0009 Ze status=0009 16:12:02 Check angles 16:12:02 SkyScan query 16:12:02 SkyScan query done: ret=0 az=100.335<-6689 ze=-51.54<-15436 Statuses=0009 0009 16:12:02 Msec=2250 True Az=100.335 Ze=-51.54 Az status=0009 Ze status=0009 16:12:03 Check angles 16:12:03 SkyScan query 16:12:03 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:12:03 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:12:03 Check angles 16:12:03 SkyScan query 16:12:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:12:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:12:04 Message to Master queued w/err=0: serial=14253 error=0 [UTC 2018-12-4 16:12:09] 16:12:09 Received message from Master: op=Filter serial=14254 16:12:09 Color wheel filter change from 0 to 0 16:12:09 FLIGetFilterPos err=0 currentPosition=0 16:12:09 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:09 Filter is already there-color wheel unchanged 16:12:09 Received message from Master: op=Shutter serial=14255 16:12:09 Shutter LASER close 16:12:09 Received message from Camera: op=State serial=14257 16:12:09 GetSingleValue result=40 Value=cccccccc 16:12:09 SkyScan query 16:12:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:12:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:10 Parameters OK 16:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:10 Set A/D data flow result=40 16:12:10 Set A/D channel type result=40 16:12:10 Set A/D encoding result=40 16:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:10 Set channel filter=0.000000e+000 result=40 16:12:10 Config A/D Result=40 16:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:10 Get A/D filter: -9.255963e+061 result=40 16:12:10 Get A/D value=-858993460 result=40 16:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:10 Parameters OK 16:12:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:10 Set A/D data flow result=40 16:12:10 Set A/D channel type result=40 16:12:10 Set A/D encoding result=40 16:12:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:10 Set channel filter=0.000000e+000 result=40 16:12:10 Config A/D Result=40 16:12:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:10 Get A/D filter: -9.255963e+061 result=40 16:12:10 Get A/D value=-858993460 result=40 16:12:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:10 Aux= 16:12:10 Message to Camera, serial 14257 queued 16:12:40 Received message from Master: op=PointingHead serial=14264 16:12:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:12:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:12:41 Point started: ret=0 16:12:41 point_skyscan result=0 16:12:42 Check angles 16:12:42 SkyScan query 16:12:42 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.45<-17430 Statuses=0009 0009 16:12:42 Msec=0 True Az=109.17 Ze=-81.45 Az status=0009 Ze status=0009 16:12:42 Check angles 16:12:42 SkyScan query 16:12:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.405<-18827 Statuses=0008 0009 16:12:43 Msec=750 True Az=112.995 Ze=-102.405 Az status=0008 Ze status=0009 16:12:43 Check angles 16:12:43 SkyScan query 16:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.345<-20223 Statuses=0008 0009 16:12:44 Msec=1500 True Az=112.995 Ze=-123.345 Az status=0008 Ze status=0009 16:12:44 Check angles 16:12:44 SkyScan query 16:12:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 16:12:44 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 16:12:45 Check angles 16:12:45 SkyScan query 16:12:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.27<-23018 Statuses=0008 0009 16:12:45 Msec=3000 True Az=112.995 Ze=-165.27 Az status=0008 Ze status=0009 16:12:45 Check angles 16:12:45 SkyScan query 16:12:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:12:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:12:46 Message to Master queued w/err=0: serial=14264 error=0 16:12:51 Received message from Master: op=Filter serial=14265 16:12:51 Color wheel filter change from 0 to 0 16:12:51 FLIGetFilterPos err=0 currentPosition=0 16:12:51 FLIGetStepsRemaining err=0 RemainingSteps=0 16:12:51 Filter is already there-color wheel unchanged 16:12:51 Received message from Master: op=Shutter serial=14266 16:12:51 Shutter LASER open 16:12:51 Received message from Camera: op=State serial=14268 16:12:51 GetSingleValue result=40 Value=cccccccc 16:12:51 SkyScan query 16:12:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:12:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:52 Parameters OK 16:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:52 Set A/D data flow result=40 16:12:52 Set A/D channel type result=40 16:12:52 Set A/D encoding result=40 16:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:52 Set channel filter=0.000000e+000 result=40 16:12:52 Config A/D Result=40 16:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:52 Get A/D filter: -9.255963e+061 result=40 16:12:52 Get A/D value=-858993460 result=40 16:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:12:52 Parameters OK 16:12:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:12:52 Set A/D data flow result=40 16:12:52 Set A/D channel type result=40 16:12:52 Set A/D encoding result=40 16:12:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:12:52 Set channel filter=0.000000e+000 result=40 16:12:52 Config A/D Result=40 16:12:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:12:52 Get A/D filter: -9.255963e+061 result=40 16:12:52 Get A/D value=-858993460 result=40 16:12:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:12:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:12:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:12:52 Aux= 16:12:52 Message to Camera, serial 14268 queued 16:12:54 Received message from Master: op=Shutter serial=14272 16:12:54 Shutter LASER close 16:12:55 Received message from Master: op=PointingHead serial=14276 16:12:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:12:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:12:55 Point started: ret=0 16:12:55 point_skyscan result=0 16:12:56 Check angles 16:12:56 SkyScan query 16:12:56 SkyScan query done: ret=0 az=90.135<-6009 ze=157.44<-1504 Statuses=0009 0009 16:12:56 Msec=0 True Az=90.135 Ze=157.44 Az status=0009 Ze status=0009 16:12:57 Check angles 16:12:57 SkyScan query 16:12:57 SkyScan query done: ret=0 az=72.285<-4819 ze=136.035<-2931 Statuses=0009 0009 16:12:57 Msec=750 True Az=72.285 Ze=136.035 Az status=0009 Ze status=0009 16:12:57 Check angles 16:12:57 SkyScan query 16:12:58 SkyScan query done: ret=0 az=54.825<-3655 ze=115.11<-4326 Statuses=0009 0009 16:12:58 Msec=1500 True Az=54.825 Ze=115.11 Az status=0009 Ze status=0009 16:12:58 Check angles 16:12:58 SkyScan query 16:12:59 SkyScan query done: ret=0 az=40.86<-2724 ze=94.125<-5725 Statuses=0009 0009 16:12:59 Msec=2250 True Az=40.86 Ze=94.125 Az status=0009 Ze status=0009 16:12:59 Check angles 16:12:59 SkyScan query 16:12:59 SkyScan query done: ret=0 az=40.995<-2733 ze=72.735<-7151 Statuses=0008 0009 16:12:59 Msec=3000 True Az=40.995 Ze=72.735 Az status=0008 Ze status=0009 16:13:00 Check angles 16:13:00 SkyScan query 16:13:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.41<-8506 Statuses=0008 0009 16:13:00 Msec=3750 True Az=40.995 Ze=52.41 Az status=0008 Ze status=0009 16:13:00 Check angles 16:13:00 SkyScan query 16:13:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:13:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:13:01 Message to Master queued w/err=0: serial=14276 error=0 16:13:06 Received message from Master: op=Filter serial=14277 16:13:06 Color wheel filter change from 0 to 0 16:13:06 FLIGetFilterPos err=0 currentPosition=0 16:13:06 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:06 Filter is already there-color wheel unchanged 16:13:06 Received message from Master: op=Shutter serial=14278 16:13:06 Shutter LASER close 16:13:06 Received message from Camera: op=State serial=14280 16:13:06 GetSingleValue result=40 Value=cccccccc 16:13:06 SkyScan query 16:13:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:13:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:07 Parameters OK 16:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:07 Set A/D data flow result=40 16:13:07 Set A/D channel type result=40 16:13:07 Set A/D encoding result=40 16:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:07 Set channel filter=0.000000e+000 result=40 16:13:07 Config A/D Result=40 16:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:07 Get A/D filter: -9.255963e+061 result=40 16:13:07 Get A/D value=-858993460 result=40 16:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:07 Parameters OK 16:13:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:07 Set A/D data flow result=40 16:13:07 Set A/D channel type result=40 16:13:07 Set A/D encoding result=40 16:13:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:07 Set channel filter=0.000000e+000 result=40 16:13:07 Config A/D Result=40 16:13:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:07 Get A/D filter: -9.255963e+061 result=40 16:13:07 Get A/D value=-858993460 result=40 16:13:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:07 Aux= 16:13:07 Message to Camera, serial 14280 queued 16:13:38 Received message from Master: op=PointingHead serial=14287 16:13:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:13:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:13:38 Point started: ret=0 16:13:38 point_skyscan result=0 16:13:39 Check angles 16:13:39 SkyScan query 16:13:39 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 16:13:39 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 16:13:40 Check angles 16:13:40 SkyScan query 16:13:40 SkyScan query done: ret=0 az=81.645<-5443 ze=66.495<-7567 Statuses=0009 0008 16:13:40 Msec=750 True Az=81.645 Ze=66.495 Az status=0009 Ze status=0008 16:13:40 Check angles 16:13:40 SkyScan query 16:13:41 SkyScan query done: ret=0 az=99.285<-6619 ze=66.495<-7567 Statuses=0009 0008 16:13:41 Msec=1500 True Az=99.285 Ze=66.495 Az status=0009 Ze status=0008 16:13:41 Check angles 16:13:41 SkyScan query 16:13:42 SkyScan query done: ret=0 az=116.79<-7786 ze=66.495<-7567 Statuses=0009 0008 16:13:42 Msec=2250 True Az=116.79 Ze=66.495 Az status=0009 Ze status=0008 16:13:42 Check angles 16:13:42 SkyScan query 16:13:42 SkyScan query done: ret=0 az=134.25<-8950 ze=66.495<-7567 Statuses=0009 0008 16:13:42 Msec=3000 True Az=134.25 Ze=66.495 Az status=0009 Ze status=0008 16:13:43 Check angles 16:13:43 SkyScan query 16:13:43 SkyScan query done: ret=0 az=151.845<-10123 ze=66.495<-7567 Statuses=0009 0008 16:13:43 Msec=3750 True Az=151.845 Ze=66.495 Az status=0009 Ze status=0008 16:13:43 Check angles 16:13:43 SkyScan query 16:13:44 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:13:44 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:13:44 Message to Master queued w/err=0: serial=14287 error=0 16:13:49 Received message from Master: op=Filter serial=14288 16:13:49 Color wheel filter change from 0 to 0 16:13:49 FLIGetFilterPos err=0 currentPosition=0 16:13:49 FLIGetStepsRemaining err=0 RemainingSteps=0 16:13:49 Filter is already there-color wheel unchanged 16:13:49 Received message from Master: op=Shutter serial=14289 16:13:49 Shutter LASER close 16:13:49 Received message from Camera: op=State serial=14291 16:13:49 GetSingleValue result=40 Value=cccccccc 16:13:49 SkyScan query 16:13:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:13:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:50 Parameters OK 16:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:50 Set A/D data flow result=40 16:13:50 Set A/D channel type result=40 16:13:50 Set A/D encoding result=40 16:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:50 Set channel filter=0.000000e+000 result=40 16:13:50 Config A/D Result=40 16:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:50 Get A/D filter: -9.255963e+061 result=40 16:13:50 Get A/D value=-858993460 result=40 16:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:13:50 Parameters OK 16:13:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:13:50 Set A/D data flow result=40 16:13:50 Set A/D channel type result=40 16:13:50 Set A/D encoding result=40 16:13:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:13:50 Set channel filter=0.000000e+000 result=40 16:13:50 Config A/D Result=40 16:13:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:13:50 Get A/D filter: -9.255963e+061 result=40 16:13:50 Get A/D value=-858993460 result=40 16:13:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:13:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:13:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:13:50 Aux= 16:13:50 Message to Camera, serial 14291 queued 16:14:20 Received message from Master: op=PointingHead serial=14298 16:14:20 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:14:20 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:14:21 Point started: ret=0 16:14:21 point_skyscan result=0 16:14:22 Check angles 16:14:22 SkyScan query 16:14:22 SkyScan query done: ret=0 az=135.165<-9011 ze=36.93<-9538 Statuses=0009 0009 16:14:22 Msec=0 True Az=135.165 Ze=36.93 Az status=0009 Ze status=0009 16:14:22 Check angles 16:14:22 SkyScan query 16:14:23 SkyScan query done: ret=0 az=117.675<-7845 ze=15.96<-10936 Statuses=0009 0009 16:14:23 Msec=750 True Az=117.675 Ze=15.96 Az status=0009 Ze status=0009 16:14:23 Check angles 16:14:23 SkyScan query 16:14:24 SkyScan query done: ret=0 az=100.29<-6686 ze=-4.98<-12332 Statuses=0009 0009 16:14:24 Msec=1500 True Az=100.29 Ze=-4.98 Az status=0009 Ze status=0009 16:14:24 Check angles 16:14:24 SkyScan query 16:14:24 SkyScan query done: ret=0 az=82.815<-5521 ze=-25.965<-13731 Statuses=0009 0009 16:14:24 Msec=2250 True Az=82.815 Ze=-25.965 Az status=0009 Ze status=0009 16:14:25 Check angles 16:14:25 SkyScan query 16:14:25 SkyScan query done: ret=0 az=65.325<-4355 ze=-38.565<-14571 Statuses=0009 0008 16:14:25 Msec=3000 True Az=65.325 Ze=-38.565 Az status=0009 Ze status=0008 16:14:25 Check angles 16:14:25 SkyScan query 16:14:26 SkyScan query done: ret=0 az=47.895<-3193 ze=-38.535<-14569 Statuses=0009 0008 16:14:26 Msec=3750 True Az=47.895 Ze=-38.535 Az status=0009 Ze status=0008 16:14:26 Check angles 16:14:26 SkyScan query 16:14:27 SkyScan query done: ret=0 az=40.98<-2732 ze=-38.505<-14567 Statuses=0008 0008 16:14:27 Msec=4500 True Az=40.98 Ze=-38.505 Az status=0008 Ze status=0008 16:14:27 Message to Master queued w/err=0: serial=14298 error=0 16:14:32 Received message from Master: op=Filter serial=14299 16:14:32 Color wheel filter change from 0 to 0 16:14:32 FLIGetFilterPos err=0 currentPosition=0 16:14:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:14:32 Filter is already there-color wheel unchanged 16:14:32 Received message from Master: op=Shutter serial=14300 16:14:32 Shutter LASER close 16:14:32 Received message from Camera: op=State serial=14302 16:14:32 GetSingleValue result=40 Value=cccccccc 16:14:32 SkyScan query 16:14:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:14:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:32 Parameters OK 16:14:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:32 Set A/D data flow result=40 16:14:32 Set A/D channel type result=40 16:14:32 Set A/D encoding result=40 16:14:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:32 Set channel filter=0.000000e+000 result=40 16:14:32 Config A/D Result=40 16:14:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:32 Get A/D filter: -9.255963e+061 result=40 16:14:32 Get A/D value=-858993460 result=40 16:14:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:14:32 Parameters OK 16:14:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:14:32 Set A/D data flow result=40 16:14:32 Set A/D channel type result=40 16:14:32 Set A/D encoding result=40 16:14:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:14:32 Set channel filter=0.000000e+000 result=40 16:14:32 Config A/D Result=40 16:14:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:14:32 Get A/D filter: -9.255963e+061 result=40 16:14:32 Get A/D value=-858993460 result=40 16:14:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:14:32 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:14:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:14:32 Aux= 16:14:32 Message to Camera, serial 14302 queued 16:15:03 Received message from Master: op=PointingHead serial=14309 16:15:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:15:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:15:04 Point started: ret=0 16:15:04 point_skyscan result=0 16:15:04 Check angles 16:15:04 SkyScan query 16:15:05 SkyScan query done: ret=0 az=63.96<-4264 ze=-68.34<-16556 Statuses=0009 0009 16:15:05 Msec=0 True Az=63.96 Ze=-68.34 Az status=0009 Ze status=0009 16:15:05 Check angles 16:15:05 SkyScan query 16:15:06 SkyScan query done: ret=0 az=81.405<-5427 ze=-89.31<-17954 Statuses=0009 0009 16:15:06 Msec=750 True Az=81.405 Ze=-89.31 Az status=0009 Ze status=0009 16:15:06 Check angles 16:15:06 SkyScan query 16:15:06 SkyScan query done: ret=0 az=98.91<-6594 ze=-110.25<-19350 Statuses=0009 0009 16:15:06 Msec=1500 True Az=98.91 Ze=-110.25 Az status=0009 Ze status=0009 16:15:07 Check angles 16:15:07 SkyScan query 16:15:07 SkyScan query done: ret=0 az=116.385<-7759 ze=-131.19<-20746 Statuses=0009 0009 16:15:07 Msec=2250 True Az=116.385 Ze=-131.19 Az status=0009 Ze status=0009 16:15:07 Check angles 16:15:07 SkyScan query 16:15:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.54<-21436 Statuses=0009 0008 16:15:08 Msec=3000 True Az=130.995 Ze=-141.54 Az status=0009 Ze status=0008 16:15:08 Check angles 16:15:08 SkyScan query 16:15:09 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:15:09 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:15:09 Message to Master queued w/err=0: serial=14309 error=0 16:15:14 Received message from Master: op=Filter serial=14310 16:15:14 Color wheel filter change from 0 to 0 16:15:14 FLIGetFilterPos err=0 currentPosition=0 16:15:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:14 Filter is already there-color wheel unchanged 16:15:14 Received message from Master: op=Shutter serial=14311 16:15:14 Shutter LASER close 16:15:14 Received message from Camera: op=State serial=14313 16:15:14 GetSingleValue result=40 Value=cccccccc 16:15:14 SkyScan query 16:15:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:15:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:15 Parameters OK 16:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:15 Set A/D data flow result=40 16:15:15 Set A/D channel type result=40 16:15:15 Set A/D encoding result=40 16:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:15 Set channel filter=0.000000e+000 result=40 16:15:15 Config A/D Result=40 16:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:15 Get A/D filter: -9.255963e+061 result=40 16:15:15 Get A/D value=-858993460 result=40 16:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:15 Parameters OK 16:15:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:15 Set A/D data flow result=40 16:15:15 Set A/D channel type result=40 16:15:15 Set A/D encoding result=40 16:15:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:15 Set channel filter=0.000000e+000 result=40 16:15:15 Config A/D Result=40 16:15:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:15 Get A/D filter: -9.255963e+061 result=40 16:15:15 Get A/D value=-858993460 result=40 16:15:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:15 Aux= 16:15:15 Message to Camera, serial 14313 queued 16:15:45 Received message from Master: op=PointingHead serial=14320 16:15:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:15:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:15:46 Point started: ret=0 16:15:46 point_skyscan result=0 16:15:47 Check angles 16:15:47 SkyScan query 16:15:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.33<-23422 Statuses=0009 0009 16:15:47 Msec=0 True Az=113.01 Ze=-171.33 Az status=0009 Ze status=0009 16:15:47 Check angles 16:15:47 SkyScan query 16:15:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:15:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:15:48 Message to Master queued w/err=0: serial=14320 error=0 16:15:53 Received message from Master: op=Filter serial=14321 16:15:53 Color wheel filter change from 0 to 0 16:15:53 FLIGetFilterPos err=0 currentPosition=0 16:15:53 FLIGetStepsRemaining err=0 RemainingSteps=0 16:15:53 Filter is already there-color wheel unchanged 16:15:53 Received message from Master: op=Shutter serial=14322 16:15:53 Shutter LASER open 16:15:53 Received message from Camera: op=State serial=14324 16:15:53 GetSingleValue result=40 Value=cccccccc 16:15:53 SkyScan query 16:15:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:15:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:54 Parameters OK 16:15:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:54 Set A/D data flow result=40 16:15:54 Set A/D channel type result=40 16:15:54 Set A/D encoding result=40 16:15:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:54 Set channel filter=0.000000e+000 result=40 16:15:54 Config A/D Result=40 16:15:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:54 Get A/D filter: -9.255963e+061 result=40 16:15:54 Get A/D value=-858993460 result=40 16:15:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:15:54 Parameters OK 16:15:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:15:54 Set A/D data flow result=40 16:15:54 Set A/D channel type result=40 16:15:54 Set A/D encoding result=40 16:15:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:15:54 Set channel filter=0.000000e+000 result=40 16:15:54 Config A/D Result=40 16:15:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:15:54 Get A/D filter: -9.255963e+061 result=40 16:15:54 Get A/D value=-858993460 result=40 16:15:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:15:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:15:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:15:54 Aux= 16:15:54 Message to Camera, serial 14324 queued 16:15:56 Received message from Master: op=Shutter serial=14328 16:15:56 Shutter LASER close 16:15:57 Received message from Master: op=PointingHead serial=14332 16:15:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:15:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:15:57 Point started: ret=0 16:15:57 point_skyscan result=0 16:15:58 Check angles 16:15:58 SkyScan query 16:15:59 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.355<-21557 Statuses=0009 0009 16:15:59 Msec=0 True Az=135.9 Ze=-143.355 Az status=0009 Ze status=0009 16:15:59 Check angles 16:15:59 SkyScan query 16:15:59 SkyScan query done: ret=0 az=153.81<-10254 ze=-121.965<-20131 Statuses=0009 0009 16:15:59 Msec=750 True Az=153.81 Ze=-121.965 Az status=0009 Ze status=0009 16:15:59 Check angles 16:15:59 SkyScan query 16:16:00 SkyScan query done: ret=0 az=171.225<-11415 ze=-101.04<-18736 Statuses=0009 0009 16:16:00 Msec=1500 True Az=171.225 Ze=-101.04 Az status=0009 Ze status=0009 16:16:00 Check angles 16:16:00 SkyScan query 16:16:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.07<-17338 Statuses=0008 0009 16:16:01 Msec=2250 True Az=176.025 Ze=-80.07 Az status=0008 Ze status=0009 16:16:01 Check angles 16:16:01 SkyScan query 16:16:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.145<-15943 Statuses=0008 0009 16:16:02 Msec=3000 True Az=175.995 Ze=-59.145 Az status=0008 Ze status=0009 16:16:02 Check angles 16:16:02 SkyScan query 16:16:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:16:02 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:16:02 Message to Master queued w/err=0: serial=14332 error=0 16:16:07 Received message from Master: op=Filter serial=14333 16:16:07 Color wheel filter change from 0 to 0 16:16:07 FLIGetFilterPos err=0 currentPosition=0 16:16:07 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:07 Filter is already there-color wheel unchanged 16:16:07 Received message from Master: op=Shutter serial=14334 16:16:07 Shutter LASER close 16:16:08 Received message from Camera: op=State serial=14336 16:16:08 GetSingleValue result=40 Value=cccccccc 16:16:08 SkyScan query 16:16:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:16:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:08 Parameters OK 16:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:08 Set A/D data flow result=40 16:16:08 Set A/D channel type result=40 16:16:08 Set A/D encoding result=40 16:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:08 Set channel filter=0.000000e+000 result=40 16:16:08 Config A/D Result=40 16:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:08 Get A/D filter: -9.255963e+061 result=40 16:16:08 Get A/D value=-858993460 result=40 16:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:08 Parameters OK 16:16:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:08 Set A/D data flow result=40 16:16:08 Set A/D channel type result=40 16:16:08 Set A/D encoding result=40 16:16:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:08 Set channel filter=0.000000e+000 result=40 16:16:08 Config A/D Result=40 16:16:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:08 Get A/D filter: -9.255963e+061 result=40 16:16:08 Get A/D value=-858993460 result=40 16:16:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:08 Aux= 16:16:08 Message to Camera, serial 14336 queued 16:16:39 Received message from Master: op=PointingHead serial=14343 16:16:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:16:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:16:39 Point started: ret=0 16:16:39 point_skyscan result=0 16:16:40 Check angles 16:16:40 SkyScan query 16:16:41 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.765<-13451 Statuses=0009 0009 16:16:41 Msec=0 True Az=152.985 Ze=-21.765 Az status=0009 Ze status=0009 16:16:41 Check angles 16:16:41 SkyScan query 16:16:41 SkyScan query done: ret=0 az=135.105<-9007 ze=-0.315<-12021 Statuses=0009 0009 16:16:41 Msec=750 True Az=135.105 Ze=-0.315 Az status=0009 Ze status=0009 16:16:42 Check angles 16:16:42 SkyScan query 16:16:42 SkyScan query done: ret=0 az=117.24<-7816 ze=21.03<-10598 Statuses=0009 0009 16:16:42 Msec=1500 True Az=117.24 Ze=21.03 Az status=0009 Ze status=0009 16:16:42 Check angles 16:16:42 SkyScan query 16:16:43 SkyScan query done: ret=0 az=99.54<-6636 ze=42.435<-9171 Statuses=0009 0009 16:16:43 Msec=2250 True Az=99.54 Ze=42.435 Az status=0009 Ze status=0009 16:16:43 Check angles 16:16:43 SkyScan query 16:16:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 16:16:44 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 16:16:44 Check angles 16:16:44 SkyScan query 16:16:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:16:45 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:16:45 Message to Master queued w/err=0: serial=14343 error=0 16:16:50 Received message from Master: op=Filter serial=14344 16:16:50 Color wheel filter change from 0 to 0 16:16:50 FLIGetFilterPos err=0 currentPosition=0 16:16:50 FLIGetStepsRemaining err=0 RemainingSteps=0 16:16:50 Filter is already there-color wheel unchanged 16:16:50 Received message from Master: op=Shutter serial=14345 16:16:50 Shutter LASER close 16:16:50 Received message from Camera: op=State serial=14347 16:16:50 GetSingleValue result=40 Value=cccccccc 16:16:50 SkyScan query 16:16:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:16:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:50 Parameters OK 16:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:50 Set A/D data flow result=40 16:16:50 Set A/D channel type result=40 16:16:50 Set A/D encoding result=40 16:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:50 Set channel filter=0.000000e+000 result=40 16:16:50 Config A/D Result=40 16:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:50 Get A/D filter: -9.255963e+061 result=40 16:16:50 Get A/D value=-858993460 result=40 16:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:16:50 Parameters OK 16:16:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:16:50 Set A/D data flow result=40 16:16:50 Set A/D channel type result=40 16:16:50 Set A/D encoding result=40 16:16:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:16:50 Set channel filter=0.000000e+000 result=40 16:16:50 Config A/D Result=40 16:16:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:16:50 Get A/D filter: -9.255963e+061 result=40 16:16:50 Get A/D value=-858993460 result=40 16:16:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:16:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:16:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:16:50 Aux= 16:16:50 Message to Camera, serial 14347 queued 16:17:21 Received message from Master: op=PointingHead serial=14354 16:17:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:17:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:17:21 Point started: ret=0 16:17:21 point_skyscan result=0 16:17:22 Check angles 16:17:22 SkyScan query 16:17:23 SkyScan query done: ret=0 az=108.84<-7256 ze=38.49<-9434 Statuses=0009 0008 16:17:23 Msec=0 True Az=108.84 Ze=38.49 Az status=0009 Ze status=0008 16:17:23 Check angles 16:17:23 SkyScan query 16:17:24 SkyScan query done: ret=0 az=126.405<-8427 ze=38.505<-9433 Statuses=0009 0008 16:17:24 Msec=750 True Az=126.405 Ze=38.505 Az status=0009 Ze status=0008 16:17:24 Check angles 16:17:24 SkyScan query 16:17:24 SkyScan query done: ret=0 az=144.195<-9613 ze=38.505<-9433 Statuses=0009 0008 16:17:24 Msec=1500 True Az=144.195 Ze=38.505 Az status=0009 Ze status=0008 16:17:25 Check angles 16:17:25 SkyScan query 16:17:25 SkyScan query done: ret=0 az=161.595<-10773 ze=38.505<-9433 Statuses=0009 0008 16:17:25 Msec=2250 True Az=161.595 Ze=38.505 Az status=0009 Ze status=0008 16:17:25 Check angles 16:17:25 SkyScan query 16:17:26 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 16:17:26 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 16:17:26 Check angles 16:17:26 SkyScan query 16:17:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:17:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:17:27 Message to Master queued w/err=0: serial=14354 error=0 16:17:32 Received message from Master: op=Filter serial=14355 16:17:32 Color wheel filter change from 0 to 0 16:17:32 FLIGetFilterPos err=0 currentPosition=0 16:17:32 FLIGetStepsRemaining err=0 RemainingSteps=0 16:17:32 Filter is already there-color wheel unchanged 16:17:32 Received message from Master: op=Shutter serial=14356 16:17:32 Shutter LASER close 16:17:32 Received message from Camera: op=State serial=14358 16:17:32 GetSingleValue result=40 Value=cccccccc 16:17:32 SkyScan query 16:17:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:17:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:32 Parameters OK 16:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:32 Set A/D data flow result=40 16:17:32 Set A/D channel type result=40 16:17:32 Set A/D encoding result=40 16:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:32 Set channel filter=0.000000e+000 result=40 16:17:32 Config A/D Result=40 16:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:32 Get A/D filter: -9.255963e+061 result=40 16:17:32 Get A/D value=-858993460 result=40 16:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:17:32 Parameters OK 16:17:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:17:32 Set A/D data flow result=40 16:17:32 Set A/D channel type result=40 16:17:32 Set A/D encoding result=40 16:17:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:17:32 Set channel filter=0.000000e+000 result=40 16:17:32 Config A/D Result=40 16:17:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:17:32 Get A/D filter: -9.255963e+061 result=40 16:17:32 Get A/D value=-858993460 result=40 16:17:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:17:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:17:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:17:32 Aux= 16:17:32 Message to Camera, serial 14358 queued 16:18:03 Received message from Master: op=PointingHead serial=14365 16:18:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:18:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:18:04 Point started: ret=0 16:18:04 point_skyscan result=0 16:18:04 Check angles 16:18:04 SkyScan query 16:18:05 SkyScan query done: ret=0 az=152.985<-10199 ze=8.775<-11415 Statuses=0009 0009 16:18:05 Msec=0 True Az=152.985 Ze=8.775 Az status=0009 Ze status=0009 16:18:05 Check angles 16:18:05 SkyScan query 16:18:06 SkyScan query done: ret=0 az=135.705<-9047 ze=-12.165<-12811 Statuses=0009 0009 16:18:06 Msec=750 True Az=135.705 Ze=-12.165 Az status=0009 Ze status=0009 16:18:06 Check angles 16:18:06 SkyScan query 16:18:06 SkyScan query done: ret=0 az=118.125<-7875 ze=-33.105<-14207 Statuses=0009 0009 16:18:06 Msec=1500 True Az=118.125 Ze=-33.105 Az status=0009 Ze status=0009 16:18:07 Check angles 16:18:07 SkyScan query 16:18:07 SkyScan query done: ret=0 az=100.725<-6715 ze=-51.51<-15434 Statuses=0009 0009 16:18:07 Msec=2250 True Az=100.725 Ze=-51.51 Az status=0009 Ze status=0009 16:18:07 Check angles 16:18:07 SkyScan query 16:18:08 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 16:18:08 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 16:18:08 Check angles 16:18:08 SkyScan query 16:18:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 16:18:09 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 16:18:09 Message to Master queued w/err=0: serial=14365 error=0 16:18:14 Received message from Master: op=Filter serial=14366 16:18:14 Color wheel filter change from 0 to 0 16:18:14 FLIGetFilterPos err=0 currentPosition=0 16:18:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:14 Filter is already there-color wheel unchanged 16:18:14 Received message from Master: op=Shutter serial=14367 16:18:14 Shutter LASER close 16:18:14 Received message from Camera: op=State serial=14369 16:18:14 GetSingleValue result=40 Value=cccccccc 16:18:14 SkyScan query 16:18:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:18:14 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:14 Parameters OK 16:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:14 Set A/D data flow result=40 16:18:14 Set A/D channel type result=40 16:18:14 Set A/D encoding result=40 16:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:14 Set channel filter=0.000000e+000 result=40 16:18:14 Config A/D Result=40 16:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:14 Get A/D filter: -9.255963e+061 result=40 16:18:14 Get A/D value=-858993460 result=40 16:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:14 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:14 Parameters OK 16:18:14 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:14 Set A/D data flow result=40 16:18:14 Set A/D channel type result=40 16:18:14 Set A/D encoding result=40 16:18:14 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:14 Set channel filter=0.000000e+000 result=40 16:18:14 Config A/D Result=40 16:18:14 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:14 Get A/D filter: -9.255963e+061 result=40 16:18:14 Get A/D value=-858993460 result=40 16:18:14 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:14 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:14 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:14 Aux= 16:18:14 Message to Camera, serial 14369 queued 16:18:45 Received message from Master: op=PointingHead serial=14376 16:18:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:18:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:18:46 Point started: ret=0 16:18:46 point_skyscan result=0 16:18:46 Check angles 16:18:46 SkyScan query 16:18:47 SkyScan query done: ret=0 az=109.485<-7299 ze=-81.795<-17453 Statuses=0009 0009 16:18:47 Msec=0 True Az=109.485 Ze=-81.795 Az status=0009 Ze status=0009 16:18:47 Check angles 16:18:47 SkyScan query 16:18:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.735<-18849 Statuses=0008 0009 16:18:48 Msec=750 True Az=112.995 Ze=-102.735 Az status=0008 Ze status=0009 16:18:48 Check angles 16:18:48 SkyScan query 16:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 16:18:49 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 16:18:49 Check angles 16:18:49 SkyScan query 16:18:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.095<-21673 Statuses=0008 0009 16:18:49 Msec=2250 True Az=112.995 Ze=-145.095 Az status=0008 Ze status=0009 16:18:49 Check angles 16:18:49 SkyScan query 16:18:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 16:18:50 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 16:18:50 Check angles 16:18:50 SkyScan query 16:18:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:18:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:18:51 Message to Master queued w/err=0: serial=14376 error=0 16:18:56 Received message from Master: op=Filter serial=14377 16:18:56 Color wheel filter change from 0 to 0 16:18:56 FLIGetFilterPos err=0 currentPosition=0 16:18:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:18:56 Filter is already there-color wheel unchanged 16:18:56 Received message from Master: op=Shutter serial=14378 16:18:56 Shutter LASER open 16:18:56 Received message from Camera: op=State serial=14380 16:18:56 GetSingleValue result=40 Value=cccccccc 16:18:56 SkyScan query 16:18:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:18:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:57 Parameters OK 16:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:57 Set A/D data flow result=40 16:18:57 Set A/D channel type result=40 16:18:57 Set A/D encoding result=40 16:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:57 Set channel filter=0.000000e+000 result=40 16:18:57 Config A/D Result=40 16:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:57 Get A/D filter: -9.255963e+061 result=40 16:18:57 Get A/D value=-858993460 result=40 16:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:18:57 Parameters OK 16:18:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:18:57 Set A/D data flow result=40 16:18:57 Set A/D channel type result=40 16:18:57 Set A/D encoding result=40 16:18:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:18:57 Set channel filter=0.000000e+000 result=40 16:18:57 Config A/D Result=40 16:18:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:18:57 Get A/D filter: -9.255963e+061 result=40 16:18:57 Get A/D value=-858993460 result=40 16:18:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:18:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:18:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:18:57 Aux= 16:18:57 Message to Camera, serial 14380 queued 16:18:59 Received message from Master: op=Shutter serial=14384 16:18:59 Shutter LASER close 16:19:00 Received message from Master: op=PointingHead serial=14388 16:19:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:19:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:19:00 Point started: ret=0 16:19:00 point_skyscan result=0 16:19:01 Check angles 16:19:01 SkyScan query 16:19:01 SkyScan query done: ret=0 az=89.895<-5993 ze=157.275<-1515 Statuses=0009 0009 16:19:01 Msec=0 True Az=89.895 Ze=157.275 Az status=0009 Ze status=0009 16:19:01 Check angles 16:19:01 SkyScan query 16:19:02 SkyScan query done: ret=0 az=72.09<-4806 ze=135.855<-2943 Statuses=0009 0009 16:19:02 Msec=750 True Az=72.09 Ze=135.855 Az status=0009 Ze status=0009 16:19:02 Check angles 16:19:02 SkyScan query 16:19:03 SkyScan query done: ret=0 az=54.435<-3629 ze=114.48<-4368 Statuses=0009 0009 16:19:03 Msec=1500 True Az=54.435 Ze=114.48 Az status=0009 Ze status=0009 16:19:03 Check angles 16:19:03 SkyScan query 16:19:04 SkyScan query done: ret=0 az=40.95<-2730 ze=93.525<-5765 Statuses=0009 0009 16:19:04 Msec=2250 True Az=40.95 Ze=93.525 Az status=0009 Ze status=0009 16:19:04 Check angles 16:19:04 SkyScan query 16:19:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.555<-7163 Statuses=0008 0009 16:19:04 Msec=3000 True Az=40.995 Ze=72.555 Az status=0008 Ze status=0009 16:19:04 Check angles 16:19:04 SkyScan query 16:19:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.32<-8512 Statuses=0008 0009 16:19:05 Msec=3750 True Az=40.995 Ze=52.32 Az status=0008 Ze status=0009 16:19:05 Check angles 16:19:05 SkyScan query 16:19:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:19:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:19:06 Message to Master queued w/err=0: serial=14388 error=0 16:19:11 Received message from Master: op=Filter serial=14389 16:19:11 Color wheel filter change from 0 to 0 16:19:11 FLIGetFilterPos err=0 currentPosition=0 16:19:11 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:11 Filter is already there-color wheel unchanged 16:19:11 Received message from Master: op=Shutter serial=14390 16:19:11 Shutter LASER close 16:19:11 Received message from Camera: op=State serial=14392 16:19:11 GetSingleValue result=40 Value=cccccccc 16:19:11 SkyScan query 16:19:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:19:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:12 Parameters OK 16:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:12 Set A/D data flow result=40 16:19:12 Set A/D channel type result=40 16:19:12 Set A/D encoding result=40 16:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:12 Set channel filter=0.000000e+000 result=40 16:19:12 Config A/D Result=40 16:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:12 Get A/D filter: -9.255963e+061 result=40 16:19:12 Get A/D value=-858993460 result=40 16:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:12 Parameters OK 16:19:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:12 Set A/D data flow result=40 16:19:12 Set A/D channel type result=40 16:19:12 Set A/D encoding result=40 16:19:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:12 Set channel filter=0.000000e+000 result=40 16:19:12 Config A/D Result=40 16:19:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:12 Get A/D filter: -9.255963e+061 result=40 16:19:12 Get A/D value=-858993460 result=40 16:19:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:12 Aux= 16:19:12 Message to Camera, serial 14392 queued 16:19:43 Received message from Master: op=PointingHead serial=14399 16:19:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 16:19:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 16:19:43 Point started: ret=0 16:19:43 point_skyscan result=0 16:19:44 Check angles 16:19:44 SkyScan query 16:19:44 SkyScan query done: ret=0 az=64.17<-4278 ze=66.555<-7563 Statuses=0009 0008 16:19:44 Msec=0 True Az=64.17 Ze=66.555 Az status=0009 Ze status=0008 16:19:44 Check angles 16:19:44 SkyScan query 16:19:45 SkyScan query done: ret=0 az=81.675<-5445 ze=66.495<-7567 Statuses=0009 0008 16:19:45 Msec=750 True Az=81.675 Ze=66.495 Az status=0009 Ze status=0008 16:19:45 Check angles 16:19:45 SkyScan query 16:19:46 SkyScan query done: ret=0 az=99.15<-6610 ze=66.495<-7567 Statuses=0009 0008 16:19:46 Msec=1500 True Az=99.15 Ze=66.495 Az status=0009 Ze status=0008 16:19:46 Check angles 16:19:46 SkyScan query 16:19:46 SkyScan query done: ret=0 az=116.745<-7783 ze=66.495<-7567 Statuses=0009 0008 16:19:46 Msec=2250 True Az=116.745 Ze=66.495 Az status=0009 Ze status=0008 16:19:47 Check angles 16:19:47 SkyScan query 16:19:47 SkyScan query done: ret=0 az=134.205<-8947 ze=66.495<-7567 Statuses=0009 0008 16:19:47 Msec=3000 True Az=134.205 Ze=66.495 Az status=0009 Ze status=0008 16:19:47 Check angles 16:19:47 SkyScan query 16:19:48 SkyScan query done: ret=0 az=151.395<-10093 ze=66.495<-7567 Statuses=0009 0008 16:19:48 Msec=3750 True Az=151.395 Ze=66.495 Az status=0009 Ze status=0008 16:19:48 Check angles 16:19:48 SkyScan query 16:19:49 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 16:19:49 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 16:19:49 Message to Master queued w/err=0: serial=14399 error=0 16:19:54 Received message from Master: op=Filter serial=14400 16:19:54 Color wheel filter change from 0 to 0 16:19:54 FLIGetFilterPos err=0 currentPosition=0 16:19:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:19:54 Filter is already there-color wheel unchanged 16:19:54 Received message from Master: op=Shutter serial=14401 16:19:54 Shutter LASER close 16:19:54 Received message from Camera: op=State serial=14403 16:19:54 GetSingleValue result=40 Value=cccccccc 16:19:54 SkyScan query 16:19:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 16:19:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:55 Parameters OK 16:19:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:55 Set A/D data flow result=40 16:19:55 Set A/D channel type result=40 16:19:55 Set A/D encoding result=40 16:19:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:55 Set channel filter=0.000000e+000 result=40 16:19:55 Config A/D Result=40 16:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:55 Get A/D filter: -9.255963e+061 result=40 16:19:55 Get A/D value=-858993460 result=40 16:19:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:19:55 Parameters OK 16:19:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:19:55 Set A/D data flow result=40 16:19:55 Set A/D channel type result=40 16:19:55 Set A/D encoding result=40 16:19:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:19:55 Set channel filter=0.000000e+000 result=40 16:19:55 Config A/D Result=40 16:19:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:19:55 Get A/D filter: -9.255963e+061 result=40 16:19:55 Get A/D value=-858993460 result=40 16:19:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:19:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:19:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:19:55 Aux= 16:19:55 Message to Camera, serial 14403 queued 16:20:25 Received message from Master: op=PointingHead serial=14410 16:20:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:20:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:20:26 Point started: ret=0 16:20:26 point_skyscan result=0 16:20:27 Check angles 16:20:27 SkyScan query 16:20:27 SkyScan query done: ret=0 az=134.745<-8983 ze=36.39<-9574 Statuses=0009 0009 16:20:27 Msec=0 True Az=134.745 Ze=36.39 Az status=0009 Ze status=0009 16:20:27 Check angles 16:20:27 SkyScan query 16:20:28 SkyScan query done: ret=0 az=117.24<-7816 ze=15.465<-10969 Statuses=0009 0009 16:20:28 Msec=750 True Az=117.24 Ze=15.465 Az status=0009 Ze status=0009 16:20:28 Check angles 16:20:28 SkyScan query 16:20:29 SkyScan query done: ret=0 az=99.54<-6636 ze=-5.955<-12397 Statuses=0009 0009 16:20:29 Msec=1500 True Az=99.54 Ze=-5.955 Az status=0009 Ze status=0009 16:20:29 Check angles 16:20:29 SkyScan query 16:20:29 SkyScan query done: ret=0 az=82.035<-5469 ze=-26.865<-13791 Statuses=0009 0009 16:20:29 Msec=2250 True Az=82.035 Ze=-26.865 Az status=0009 Ze status=0009 16:20:30 Check angles 16:20:30 SkyScan query 16:20:30 SkyScan query done: ret=0 az=64.515<-4301 ze=-38.565<-14571 Statuses=0009 0008 16:20:30 Msec=3000 True Az=64.515 Ze=-38.565 Az status=0009 Ze status=0008 [UTC 2018-12-4 16:20:30] 16:20:30 Check angles 16:20:30 SkyScan query 16:20:31 SkyScan query done: ret=0 az=45.27<-3018 ze=-38.52<-14568 Statuses=0009 0008 16:20:31 Msec=3750 True Az=45.27 Ze=-38.52 Az status=0009 Ze status=0008 16:20:31 Check angles 16:20:31 SkyScan query 16:20:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:20:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 16:20:32 Message to Master queued w/err=0: serial=14410 error=0 16:20:37 Received message from Master: op=Filter serial=14411 16:20:37 Color wheel filter change from 0 to 0 16:20:37 FLIGetFilterPos err=0 currentPosition=0 16:20:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:20:37 Filter is already there-color wheel unchanged 16:20:37 Received message from Master: op=Shutter serial=14412 16:20:37 Shutter LASER close 16:20:37 Received message from Camera: op=State serial=14414 16:20:37 GetSingleValue result=40 Value=cccccccc 16:20:37 SkyScan query 16:20:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:20:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:37 Parameters OK 16:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:37 Set A/D data flow result=40 16:20:37 Set A/D channel type result=40 16:20:37 Set A/D encoding result=40 16:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:37 Set channel filter=0.000000e+000 result=40 16:20:37 Config A/D Result=40 16:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:37 Get A/D filter: -9.255963e+061 result=40 16:20:37 Get A/D value=-858993460 result=40 16:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:20:37 Parameters OK 16:20:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:20:37 Set A/D data flow result=40 16:20:37 Set A/D channel type result=40 16:20:37 Set A/D encoding result=40 16:20:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:20:37 Set channel filter=0.000000e+000 result=40 16:20:37 Config A/D Result=40 16:20:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:20:37 Get A/D filter: -9.255963e+061 result=40 16:20:37 Get A/D value=-858993460 result=40 16:20:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:20:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:20:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:20:37 Aux= 16:20:37 Message to Camera, serial 14414 queued 16:21:08 Received message from Master: op=PointingHead serial=14421 16:21:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:21:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:21:09 Point started: ret=0 16:21:09 point_skyscan result=0 16:21:09 Check angles 16:21:09 SkyScan query 16:21:10 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.175<-16545 Statuses=0009 0009 16:21:10 Msec=0 True Az=63.87 Ze=-68.175 Az status=0009 Ze status=0009 16:21:10 Check angles 16:21:10 SkyScan query 16:21:11 SkyScan query done: ret=0 az=81.33<-5422 ze=-89.13<-17942 Statuses=0009 0009 16:21:11 Msec=750 True Az=81.33 Ze=-89.13 Az status=0009 Ze status=0009 16:21:11 Check angles 16:21:11 SkyScan query 16:21:11 SkyScan query done: ret=0 az=98.715<-6581 ze=-110.055<-19337 Statuses=0009 0009 16:21:11 Msec=1500 True Az=98.715 Ze=-110.055 Az status=0009 Ze status=0009 16:21:12 Check angles 16:21:12 SkyScan query 16:21:12 SkyScan query done: ret=0 az=116.16<-7744 ze=-131.01<-20734 Statuses=0009 0009 16:21:12 Msec=2250 True Az=116.16 Ze=-131.01 Az status=0009 Ze status=0009 16:21:12 Check angles 16:21:12 SkyScan query 16:21:13 SkyScan query done: ret=0 az=130.965<-8731 ze=-141.54<-21436 Statuses=0009 0008 16:21:13 Msec=3000 True Az=130.965 Ze=-141.54 Az status=0009 Ze status=0008 16:21:13 Check angles 16:21:13 SkyScan query 16:21:14 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.525<-21435 Statuses=0008 0008 16:21:14 Msec=3750 True Az=130.995 Ze=-141.525 Az status=0008 Ze status=0008 16:21:14 Message to Master queued w/err=0: serial=14421 error=0 16:21:19 Received message from Master: op=Filter serial=14422 16:21:19 Color wheel filter change from 0 to 0 16:21:19 FLIGetFilterPos err=0 currentPosition=0 16:21:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:19 Filter is already there-color wheel unchanged 16:21:19 Received message from Master: op=Shutter serial=14423 16:21:19 Shutter LASER close 16:21:19 Received message from Camera: op=State serial=14425 16:21:19 GetSingleValue result=40 Value=cccccccc 16:21:19 SkyScan query 16:21:20 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:21:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:20 Parameters OK 16:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:20 Set A/D data flow result=40 16:21:20 Set A/D channel type result=40 16:21:20 Set A/D encoding result=40 16:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:20 Set channel filter=0.000000e+000 result=40 16:21:20 Config A/D Result=40 16:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:20 Get A/D filter: -9.255963e+061 result=40 16:21:20 Get A/D value=-858993460 result=40 16:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:20 Parameters OK 16:21:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:20 Set A/D data flow result=40 16:21:20 Set A/D channel type result=40 16:21:20 Set A/D encoding result=40 16:21:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:20 Set channel filter=0.000000e+000 result=40 16:21:20 Config A/D Result=40 16:21:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:20 Get A/D filter: -9.255963e+061 result=40 16:21:20 Get A/D value=-858993460 result=40 16:21:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:20 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:20 Aux= 16:21:20 Message to Camera, serial 14425 queued 16:21:49 Received message from Master: op=Identify serial=14427 16:21:50 Received message from Master: op=PointingHead serial=14435 16:21:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:21:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:21:51 Point started: ret=0 16:21:51 point_skyscan result=0 16:21:51 Check angles 16:21:51 SkyScan query 16:21:52 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.165<-23411 Statuses=0009 0009 16:21:52 Msec=0 True Az=113.025 Ze=-171.165 Az status=0009 Ze status=0009 16:21:52 Check angles 16:21:52 SkyScan query 16:21:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:21:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:21:53 Message to Master queued w/err=0: serial=14435 error=0 16:21:58 Received message from Master: op=Filter serial=14436 16:21:58 Color wheel filter change from 0 to 0 16:21:58 FLIGetFilterPos err=0 currentPosition=0 16:21:58 FLIGetStepsRemaining err=0 RemainingSteps=0 16:21:58 Filter is already there-color wheel unchanged 16:21:58 Received message from Master: op=Shutter serial=14437 16:21:58 Shutter LASER open 16:21:58 Received message from Camera: op=State serial=14439 16:21:58 GetSingleValue result=40 Value=cccccccc 16:21:58 SkyScan query 16:21:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:21:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:59 Parameters OK 16:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:59 Set A/D data flow result=40 16:21:59 Set A/D channel type result=40 16:21:59 Set A/D encoding result=40 16:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:59 Set channel filter=0.000000e+000 result=40 16:21:59 Config A/D Result=40 16:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:59 Get A/D filter: -9.255963e+061 result=40 16:21:59 Get A/D value=-858993460 result=40 16:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:21:59 Parameters OK 16:21:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:21:59 Set A/D data flow result=40 16:21:59 Set A/D channel type result=40 16:21:59 Set A/D encoding result=40 16:21:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:21:59 Set channel filter=0.000000e+000 result=40 16:21:59 Config A/D Result=40 16:21:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:21:59 Get A/D filter: -9.255963e+061 result=40 16:21:59 Get A/D value=-858993460 result=40 16:21:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:21:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:21:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:21:59 Aux= 16:21:59 Message to Camera, serial 14439 queued 16:22:01 Received message from Master: op=Shutter serial=14443 16:22:01 Shutter LASER close 16:22:02 Received message from Master: op=PointingHead serial=14447 16:22:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:22:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:22:02 Point started: ret=0 16:22:02 point_skyscan result=0 16:22:03 Check angles 16:22:03 SkyScan query 16:22:03 SkyScan query done: ret=0 az=136.485<-9099 ze=-142.74<-21516 Statuses=0009 0009 16:22:03 Msec=0 True Az=136.485 Ze=-142.74 Az status=0009 Ze status=0009 16:22:04 Check angles 16:22:04 SkyScan query 16:22:04 SkyScan query done: ret=0 az=153.9<-10260 ze=-121.77<-20118 Statuses=0009 0009 16:22:04 Msec=750 True Az=153.9 Ze=-121.77 Az status=0009 Ze status=0009 16:22:04 Check angles 16:22:04 SkyScan query 16:22:05 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.8<-18720 Statuses=0009 0009 16:22:05 Msec=1500 True Az=171.45 Ze=-100.8 Az status=0009 Ze status=0009 16:22:05 Check angles 16:22:05 SkyScan query 16:22:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.875<-17325 Statuses=0008 0009 16:22:06 Msec=2250 True Az=176.025 Ze=-79.875 Az status=0008 Ze status=0009 16:22:06 Check angles 16:22:06 SkyScan query 16:22:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.935<-15929 Statuses=0008 0009 16:22:06 Msec=3000 True Az=175.995 Ze=-58.935 Az status=0008 Ze status=0009 16:22:07 Check angles 16:22:07 SkyScan query 16:22:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:22:07 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:22:07 Message to Master queued w/err=0: serial=14447 error=0 16:22:12 Received message from Master: op=Filter serial=14448 16:22:12 Color wheel filter change from 0 to 0 16:22:12 FLIGetFilterPos err=0 currentPosition=0 16:22:12 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:12 Filter is already there-color wheel unchanged 16:22:12 Received message from Master: op=Shutter serial=14449 16:22:12 Shutter LASER close 16:22:13 Received message from Camera: op=State serial=14451 16:22:13 GetSingleValue result=40 Value=cccccccc 16:22:13 SkyScan query 16:22:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:22:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:13 Parameters OK 16:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:13 Set A/D data flow result=40 16:22:13 Set A/D channel type result=40 16:22:13 Set A/D encoding result=40 16:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:13 Set channel filter=0.000000e+000 result=40 16:22:13 Config A/D Result=40 16:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:13 Get A/D filter: -9.255963e+061 result=40 16:22:13 Get A/D value=-858993460 result=40 16:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:13 Parameters OK 16:22:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:13 Set A/D data flow result=40 16:22:13 Set A/D channel type result=40 16:22:13 Set A/D encoding result=40 16:22:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:13 Set channel filter=0.000000e+000 result=40 16:22:13 Config A/D Result=40 16:22:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:13 Get A/D filter: -9.255963e+061 result=40 16:22:13 Get A/D value=-858993460 result=40 16:22:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:13 Aux= 16:22:13 Message to Camera, serial 14451 queued 16:22:44 Received message from Master: op=PointingHead serial=14458 16:22:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:22:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:22:44 Point started: ret=0 16:22:44 point_skyscan result=0 16:22:45 Check angles 16:22:45 SkyScan query 16:22:46 SkyScan query done: ret=0 az=152.67<-10178 ze=-21.45<-13430 Statuses=0009 0009 16:22:46 Msec=0 True Az=152.67 Ze=-21.45 Az status=0009 Ze status=0009 16:22:46 Check angles 16:22:46 SkyScan query 16:22:46 SkyScan query done: ret=0 az=134.805<-8987 ze=-0.03<-12002 Statuses=0009 0009 16:22:46 Msec=750 True Az=134.805 Ze=-0.03 Az status=0009 Ze status=0009 16:22:47 Check angles 16:22:47 SkyScan query 16:22:47 SkyScan query done: ret=0 az=117.345<-7823 ze=20.91<-10606 Statuses=0009 0009 16:22:47 Msec=1500 True Az=117.345 Ze=20.91 Az status=0009 Ze status=0009 16:22:47 Check angles 16:22:47 SkyScan query 16:22:48 SkyScan query done: ret=0 az=99.96<-6664 ze=41.895<-9207 Statuses=0009 0009 16:22:48 Msec=2250 True Az=99.96 Ze=41.895 Az status=0009 Ze status=0009 16:22:48 Check angles 16:22:48 SkyScan query 16:22:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 16:22:49 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 16:22:49 Check angles 16:22:49 SkyScan query 16:22:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:22:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:22:49 Message to Master queued w/err=0: serial=14458 error=0 16:22:54 Received message from Master: op=Filter serial=14459 16:22:54 Color wheel filter change from 0 to 0 16:22:54 FLIGetFilterPos err=0 currentPosition=0 16:22:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:22:54 Filter is already there-color wheel unchanged 16:22:55 Received message from Master: op=Shutter serial=14460 16:22:55 Shutter LASER close 16:22:55 Received message from Camera: op=State serial=14462 16:22:55 GetSingleValue result=40 Value=cccccccc 16:22:55 SkyScan query 16:22:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:22:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:55 Parameters OK 16:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:55 Set A/D data flow result=40 16:22:55 Set A/D channel type result=40 16:22:55 Set A/D encoding result=40 16:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:55 Set channel filter=0.000000e+000 result=40 16:22:55 Config A/D Result=40 16:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:55 Get A/D filter: -9.255963e+061 result=40 16:22:55 Get A/D value=-858993460 result=40 16:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:22:55 Parameters OK 16:22:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:22:55 Set A/D data flow result=40 16:22:55 Set A/D channel type result=40 16:22:55 Set A/D encoding result=40 16:22:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:22:55 Set channel filter=0.000000e+000 result=40 16:22:55 Config A/D Result=40 16:22:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:22:55 Get A/D filter: -9.255963e+061 result=40 16:22:55 Get A/D value=-858993460 result=40 16:22:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:22:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:22:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:22:55 Aux= 16:22:55 Message to Camera, serial 14462 queued 16:23:26 Received message from Master: op=PointingHead serial=14469 16:23:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:23:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:23:26 Point started: ret=0 16:23:26 point_skyscan result=0 16:23:27 Check angles 16:23:27 SkyScan query 16:23:28 SkyScan query done: ret=0 az=108.72<-7248 ze=38.49<-9434 Statuses=0009 0008 16:23:28 Msec=0 True Az=108.72 Ze=38.49 Az status=0009 Ze status=0008 16:23:28 Check angles 16:23:28 SkyScan query 16:23:29 SkyScan query done: ret=0 az=126.6<-8440 ze=38.505<-9433 Statuses=0009 0008 16:23:29 Msec=750 True Az=126.6 Ze=38.505 Az status=0009 Ze status=0008 16:23:29 Check angles 16:23:29 SkyScan query 16:23:29 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 16:23:29 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 16:23:29 Check angles 16:23:29 SkyScan query 16:23:30 SkyScan query done: ret=0 az=161.475<-10765 ze=38.505<-9433 Statuses=0009 0008 16:23:30 Msec=2250 True Az=161.475 Ze=38.505 Az status=0009 Ze status=0008 16:23:30 Check angles 16:23:30 SkyScan query 16:23:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 16:23:31 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 16:23:31 Check angles 16:23:31 SkyScan query 16:23:32 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:23:32 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:23:32 Message to Master queued w/err=0: serial=14469 error=0 16:23:37 Received message from Master: op=Filter serial=14470 16:23:37 Color wheel filter change from 0 to 0 16:23:37 FLIGetFilterPos err=0 currentPosition=0 16:23:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:23:37 Filter is already there-color wheel unchanged 16:23:37 Received message from Master: op=Shutter serial=14471 16:23:37 Shutter LASER close 16:23:37 Received message from Camera: op=State serial=14473 16:23:37 GetSingleValue result=40 Value=cccccccc 16:23:37 SkyScan query 16:23:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:23:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:37 Parameters OK 16:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:37 Set A/D data flow result=40 16:23:37 Set A/D channel type result=40 16:23:37 Set A/D encoding result=40 16:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:37 Set channel filter=0.000000e+000 result=40 16:23:37 Config A/D Result=40 16:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:37 Get A/D filter: -9.255963e+061 result=40 16:23:37 Get A/D value=-858993460 result=40 16:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:23:37 Parameters OK 16:23:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:23:37 Set A/D data flow result=40 16:23:37 Set A/D channel type result=40 16:23:37 Set A/D encoding result=40 16:23:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:23:37 Set channel filter=0.000000e+000 result=40 16:23:37 Config A/D Result=40 16:23:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:23:37 Get A/D filter: -9.255963e+061 result=40 16:23:37 Get A/D value=-858993460 result=40 16:23:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:23:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:23:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:23:37 Aux= 16:23:37 Message to Camera, serial 14473 queued 16:24:08 Received message from Master: op=PointingHead serial=14480 16:24:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:24:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:24:09 Point started: ret=0 16:24:09 point_skyscan result=0 16:24:09 Check angles 16:24:09 SkyScan query 16:24:10 SkyScan query done: ret=0 az=153.18<-10212 ze=8.91<-11406 Statuses=0009 0009 16:24:10 Msec=0 True Az=153.18 Ze=8.91 Az status=0009 Ze status=0009 16:24:10 Check angles 16:24:10 SkyScan query 16:24:11 SkyScan query done: ret=0 az=135.39<-9026 ze=-12.465<-12831 Statuses=0009 0009 16:24:11 Msec=750 True Az=135.39 Ze=-12.465 Az status=0009 Ze status=0009 16:24:11 Check angles 16:24:11 SkyScan query 16:24:11 SkyScan query done: ret=0 az=117.465<-7831 ze=-33.825<-14255 Statuses=0009 0009 16:24:11 Msec=1500 True Az=117.465 Ze=-33.825 Az status=0009 Ze status=0009 16:24:12 Check angles 16:24:12 SkyScan query 16:24:12 SkyScan query done: ret=0 az=100.08<-6672 ze=-51.555<-15437 Statuses=0009 0009 16:24:12 Msec=2250 True Az=100.08 Ze=-51.555 Az status=0009 Ze status=0009 16:24:12 Check angles 16:24:12 SkyScan query 16:24:13 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:24:13 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:24:13 Check angles 16:24:13 SkyScan query 16:24:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:24:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:24:14 Message to Master queued w/err=0: serial=14480 error=0 16:24:19 Received message from Master: op=Filter serial=14481 16:24:19 Color wheel filter change from 0 to 0 16:24:19 FLIGetFilterPos err=0 currentPosition=0 16:24:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:24:19 Filter is already there-color wheel unchanged 16:24:19 Received message from Master: op=Shutter serial=14482 16:24:19 Shutter LASER close 16:24:19 Received message from Camera: op=State serial=14484 16:24:19 GetSingleValue result=40 Value=cccccccc 16:24:19 SkyScan query 16:24:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:24:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:19 Parameters OK 16:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:19 Set A/D data flow result=40 16:24:19 Set A/D channel type result=40 16:24:19 Set A/D encoding result=40 16:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:19 Set channel filter=0.000000e+000 result=40 16:24:19 Config A/D Result=40 16:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:19 Get A/D filter: -9.255963e+061 result=40 16:24:19 Get A/D value=-858993460 result=40 16:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:24:19 Parameters OK 16:24:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:24:19 Set A/D data flow result=40 16:24:19 Set A/D channel type result=40 16:24:19 Set A/D encoding result=40 16:24:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:24:19 Set channel filter=0.000000e+000 result=40 16:24:19 Config A/D Result=40 16:24:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:24:19 Get A/D filter: -9.255963e+061 result=40 16:24:19 Get A/D value=-858993460 result=40 16:24:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:24:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:24:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:24:19 Aux= 16:24:19 Message to Camera, serial 14484 queued 16:24:50 Received message from Master: op=PointingHead serial=14491 16:24:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:24:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:24:51 Point started: ret=0 16:24:51 point_skyscan result=0 16:24:51 Check angles 16:24:51 SkyScan query 16:24:52 SkyScan query done: ret=0 az=109.365<-7291 ze=-81.69<-17446 Statuses=0009 0009 16:24:52 Msec=0 True Az=109.365 Ze=-81.69 Az status=0009 Ze status=0009 16:24:52 Check angles 16:24:52 SkyScan query 16:24:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.63<-18842 Statuses=0008 0009 16:24:53 Msec=750 True Az=112.995 Ze=-102.63 Az status=0008 Ze status=0009 16:24:53 Check angles 16:24:53 SkyScan query 16:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.57<-20238 Statuses=0008 0009 16:24:54 Msec=1500 True Az=112.995 Ze=-123.57 Az status=0008 Ze status=0009 16:24:54 Check angles 16:24:54 SkyScan query 16:24:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.525<-21635 Statuses=0008 0009 16:24:54 Msec=2250 True Az=112.995 Ze=-144.525 Az status=0008 Ze status=0009 16:24:54 Check angles 16:24:54 SkyScan query 16:24:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.48<-23032 Statuses=0008 0009 16:24:55 Msec=3000 True Az=112.995 Ze=-165.48 Az status=0008 Ze status=0009 16:24:55 Check angles 16:24:55 SkyScan query 16:24:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:24:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:24:56 Message to Master queued w/err=0: serial=14491 error=0 16:25:01 Received message from Master: op=Filter serial=14492 16:25:01 Color wheel filter change from 0 to 0 16:25:01 FLIGetFilterPos err=0 currentPosition=0 16:25:01 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:01 Filter is already there-color wheel unchanged 16:25:01 Received message from Master: op=Shutter serial=14493 16:25:01 Shutter LASER open 16:25:01 Received message from Camera: op=State serial=14495 16:25:01 GetSingleValue result=40 Value=cccccccc 16:25:01 SkyScan query 16:25:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:25:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:02 Parameters OK 16:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:02 Set A/D data flow result=40 16:25:02 Set A/D channel type result=40 16:25:02 Set A/D encoding result=40 16:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:02 Set channel filter=0.000000e+000 result=40 16:25:02 Config A/D Result=40 16:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:02 Get A/D filter: -9.255963e+061 result=40 16:25:02 Get A/D value=-858993460 result=40 16:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:02 Parameters OK 16:25:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:02 Set A/D data flow result=40 16:25:02 Set A/D channel type result=40 16:25:02 Set A/D encoding result=40 16:25:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:02 Set channel filter=0.000000e+000 result=40 16:25:02 Config A/D Result=40 16:25:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:02 Get A/D filter: -9.255963e+061 result=40 16:25:02 Get A/D value=-858993460 result=40 16:25:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:02 Aux= 16:25:02 Message to Camera, serial 14495 queued 16:25:04 Received message from Master: op=Shutter serial=14499 16:25:04 Shutter LASER close 16:25:05 Received message from Master: op=PointingHead serial=14503 16:25:05 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:25:05 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:25:05 Point started: ret=0 16:25:05 point_skyscan result=0 16:25:06 Check angles 16:25:06 SkyScan query 16:25:06 SkyScan query done: ret=0 az=89.475<-5965 ze=156.78<-1548 Statuses=0009 0009 16:25:06 Msec=0 True Az=89.475 Ze=156.78 Az status=0009 Ze status=0009 16:25:06 Check angles 16:25:06 SkyScan query 16:25:07 SkyScan query done: ret=0 az=71.52<-4768 ze=135.36<-2976 Statuses=0009 0009 16:25:07 Msec=750 True Az=71.52 Ze=135.36 Az status=0009 Ze status=0009 16:25:07 Check angles 16:25:07 SkyScan query 16:25:08 SkyScan query done: ret=0 az=54.39<-3626 ze=114.405<-4373 Statuses=0009 0009 16:25:08 Msec=1500 True Az=54.39 Ze=114.405 Az status=0009 Ze status=0009 16:25:08 Check angles 16:25:08 SkyScan query 16:25:09 SkyScan query done: ret=0 az=40.95<-2730 ze=93.465<-5769 Statuses=0009 0009 16:25:09 Msec=2250 True Az=40.95 Ze=93.465 Az status=0009 Ze status=0009 16:25:09 Check angles 16:25:09 SkyScan query 16:25:09 SkyScan query done: ret=0 az=40.995<-2733 ze=72.51<-7166 Statuses=0008 0009 16:25:09 Msec=3000 True Az=40.995 Ze=72.51 Az status=0008 Ze status=0009 16:25:09 Check angles 16:25:09 SkyScan query 16:25:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.29<-8514 Statuses=0008 0009 16:25:10 Msec=3750 True Az=40.995 Ze=52.29 Az status=0008 Ze status=0009 16:25:10 Check angles 16:25:10 SkyScan query 16:25:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:25:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:25:11 Message to Master queued w/err=0: serial=14503 error=0 16:25:16 Received message from Master: op=Filter serial=14504 16:25:16 Color wheel filter change from 0 to 0 16:25:16 FLIGetFilterPos err=0 currentPosition=0 16:25:16 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:16 Filter is already there-color wheel unchanged 16:25:16 Received message from Master: op=Shutter serial=14505 16:25:16 Shutter LASER close 16:25:16 Received message from Camera: op=State serial=14507 16:25:16 GetSingleValue result=40 Value=cccccccc 16:25:16 SkyScan query 16:25:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:25:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:17 Parameters OK 16:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:17 Set A/D data flow result=40 16:25:17 Set A/D channel type result=40 16:25:17 Set A/D encoding result=40 16:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:17 Set channel filter=0.000000e+000 result=40 16:25:17 Config A/D Result=40 16:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:17 Get A/D filter: -9.255963e+061 result=40 16:25:17 Get A/D value=-858993460 result=40 16:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:17 Parameters OK 16:25:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:17 Set A/D data flow result=40 16:25:17 Set A/D channel type result=40 16:25:17 Set A/D encoding result=40 16:25:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:17 Set channel filter=0.000000e+000 result=40 16:25:17 Config A/D Result=40 16:25:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:17 Get A/D filter: -9.255963e+061 result=40 16:25:17 Get A/D value=-858993460 result=40 16:25:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:17 Aux= 16:25:17 Message to Camera, serial 14507 queued 16:25:48 Received message from Master: op=PointingHead serial=14514 16:25:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:25:48 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:25:48 Point started: ret=0 16:25:48 point_skyscan result=0 16:25:49 Check angles 16:25:49 SkyScan query 16:25:49 SkyScan query done: ret=0 az=40.995<-2733 ze=21.72<-10552 Statuses=0008 0009 16:25:49 Msec=0 True Az=40.995 Ze=21.72 Az status=0008 Ze status=0009 16:25:50 Check angles 16:25:50 SkyScan query 16:25:50 SkyScan query done: ret=0 az=40.995<-2733 ze=0.75<-11950 Statuses=0008 0009 16:25:50 Msec=750 True Az=40.995 Ze=0.75 Az status=0008 Ze status=0009 16:25:50 Check angles 16:25:50 SkyScan query 16:25:51 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.205<-13347 Statuses=0008 0009 16:25:51 Msec=1500 True Az=40.995 Ze=-20.205 Az status=0008 Ze status=0009 16:25:51 Check angles 16:25:51 SkyScan query 16:25:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0009 16:25:52 Msec=2250 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0009 16:25:52 Check angles 16:25:52 SkyScan query 16:25:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 16:25:52 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 16:25:52 Message to Master queued w/err=0: serial=14514 error=0 16:25:57 Received message from Master: op=Filter serial=14515 16:25:57 Color wheel filter change from 0 to 0 16:25:57 FLIGetFilterPos err=0 currentPosition=0 16:25:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:25:57 Filter is already there-color wheel unchanged 16:25:58 Received message from Master: op=Shutter serial=14516 16:25:58 Shutter LASER close 16:25:58 Received message from Camera: op=State serial=14518 16:25:58 GetSingleValue result=40 Value=cccccccc 16:25:58 SkyScan query 16:25:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:25:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:58 Parameters OK 16:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:58 Set A/D data flow result=40 16:25:58 Set A/D channel type result=40 16:25:58 Set A/D encoding result=40 16:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:58 Set channel filter=0.000000e+000 result=40 16:25:58 Config A/D Result=40 16:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:58 Get A/D filter: -9.255963e+061 result=40 16:25:58 Get A/D value=-858993460 result=40 16:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:25:58 Parameters OK 16:25:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:25:58 Set A/D data flow result=40 16:25:58 Set A/D channel type result=40 16:25:58 Set A/D encoding result=40 16:25:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:25:58 Set channel filter=0.000000e+000 result=40 16:25:58 Config A/D Result=40 16:25:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:25:58 Get A/D filter: -9.255963e+061 result=40 16:25:58 Get A/D value=-858993460 result=40 16:25:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:25:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:25:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:25:58 Aux= 16:25:58 Message to Camera, serial 14518 queued 16:26:29 Received message from Master: op=PointingHead serial=14525 16:26:29 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:26:29 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:26:29 Point started: ret=0 16:26:29 point_skyscan result=0 16:26:30 Check angles 16:26:30 SkyScan query 16:26:31 SkyScan query done: ret=0 az=63.855<-4257 ze=-68.235<-16549 Statuses=0009 0009 16:26:31 Msec=0 True Az=63.855 Ze=-68.235 Az status=0009 Ze status=0009 16:26:31 Check angles 16:26:31 SkyScan query 16:26:31 SkyScan query done: ret=0 az=81.87<-5458 ze=-89.64<-17976 Statuses=0009 0009 16:26:31 Msec=750 True Az=81.87 Ze=-89.64 Az status=0009 Ze status=0009 16:26:32 Check angles 16:26:32 SkyScan query 16:26:32 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.61<-19374 Statuses=0009 0009 16:26:32 Msec=1500 True Az=99.33 Ze=-110.61 Az status=0009 Ze status=0009 16:26:32 Check angles 16:26:32 SkyScan query 16:26:33 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.55<-20770 Statuses=0009 0009 16:26:33 Msec=2250 True Az=116.76 Ze=-131.55 Az status=0009 Ze status=0009 16:26:33 Check angles 16:26:33 SkyScan query 16:26:34 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:26:34 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:26:34 Check angles 16:26:34 SkyScan query 16:26:34 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:26:34 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:26:34 Message to Master queued w/err=0: serial=14525 error=0 16:26:39 Received message from Master: op=Filter serial=14526 16:26:39 Color wheel filter change from 0 to 0 16:26:39 FLIGetFilterPos err=0 currentPosition=0 16:26:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:26:39 Filter is already there-color wheel unchanged 16:26:40 Received message from Master: op=Shutter serial=14527 16:26:40 Shutter LASER close 16:26:40 Received message from Camera: op=State serial=14529 16:26:40 GetSingleValue result=40 Value=cccccccc 16:26:40 SkyScan query 16:26:40 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:26:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:40 Parameters OK 16:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:40 Set A/D data flow result=40 16:26:40 Set A/D channel type result=40 16:26:40 Set A/D encoding result=40 16:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:40 Set channel filter=0.000000e+000 result=40 16:26:40 Config A/D Result=40 16:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:40 Get A/D filter: -9.255963e+061 result=40 16:26:40 Get A/D value=-858993460 result=40 16:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:26:40 Parameters OK 16:26:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:26:40 Set A/D data flow result=40 16:26:40 Set A/D channel type result=40 16:26:40 Set A/D encoding result=40 16:26:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:26:40 Set channel filter=0.000000e+000 result=40 16:26:40 Config A/D Result=40 16:26:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:26:40 Get A/D filter: -9.255963e+061 result=40 16:26:40 Get A/D value=-858993460 result=40 16:26:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:26:40 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:26:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:26:40 Aux= 16:26:40 Message to Camera, serial 14529 queued 16:27:11 Received message from Master: op=PointingHead serial=14536 16:27:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:27:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:27:11 Point started: ret=0 16:27:11 point_skyscan result=0 16:27:12 Check angles 16:27:12 SkyScan query 16:27:13 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.195<-23413 Statuses=0009 0009 16:27:13 Msec=0 True Az=113.01 Ze=-171.195 Az status=0009 Ze status=0009 16:27:13 Check angles 16:27:13 SkyScan query 16:27:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:27:14 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:27:14 Message to Master queued w/err=0: serial=14536 error=0 16:27:19 Received message from Master: op=Filter serial=14537 16:27:19 Color wheel filter change from 0 to 0 16:27:19 FLIGetFilterPos err=0 currentPosition=0 16:27:19 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:19 Filter is already there-color wheel unchanged 16:27:19 Received message from Master: op=Shutter serial=14538 16:27:19 Shutter LASER open 16:27:19 Received message from Camera: op=State serial=14540 16:27:19 GetSingleValue result=40 Value=cccccccc 16:27:19 SkyScan query 16:27:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:27:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:19 Parameters OK 16:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:19 Set A/D data flow result=40 16:27:19 Set A/D channel type result=40 16:27:19 Set A/D encoding result=40 16:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:19 Set channel filter=0.000000e+000 result=40 16:27:19 Config A/D Result=40 16:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:19 Get A/D filter: -9.255963e+061 result=40 16:27:19 Get A/D value=-858993460 result=40 16:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:19 Parameters OK 16:27:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:19 Set A/D data flow result=40 16:27:19 Set A/D channel type result=40 16:27:19 Set A/D encoding result=40 16:27:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:19 Set channel filter=0.000000e+000 result=40 16:27:19 Config A/D Result=40 16:27:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:19 Get A/D filter: -9.255963e+061 result=40 16:27:19 Get A/D value=-858993460 result=40 16:27:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:19 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:19 Aux= 16:27:19 Message to Camera, serial 14540 queued 16:27:22 Received message from Master: op=Shutter serial=14544 16:27:22 Shutter LASER close 16:27:22 Received message from Master: op=PointingHead serial=14548 16:27:22 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:27:22 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:27:23 Point started: ret=0 16:27:23 point_skyscan result=0 16:27:24 Check angles 16:27:24 SkyScan query 16:27:24 SkyScan query done: ret=0 az=136.035<-9069 ze=-143.145<-21543 Statuses=0009 0009 16:27:24 Msec=0 True Az=136.035 Ze=-143.145 Az status=0009 Ze status=0009 16:27:24 Check angles 16:27:24 SkyScan query 16:27:25 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.175<-20145 Statuses=0009 0009 16:27:25 Msec=750 True Az=153.615 Ze=-122.175 Az status=0009 Ze status=0009 16:27:25 Check angles 16:27:25 SkyScan query 16:27:26 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.265<-18751 Statuses=0009 0009 16:27:26 Msec=1500 True Az=171.015 Ze=-101.265 Az status=0009 Ze status=0009 16:27:26 Check angles 16:27:26 SkyScan query 16:27:26 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.28<-17352 Statuses=0008 0009 16:27:26 Msec=2250 True Az=176.025 Ze=-80.28 Az status=0008 Ze status=0009 16:27:27 Check angles 16:27:27 SkyScan query 16:27:27 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.355<-15957 Statuses=0008 0009 16:27:27 Msec=3000 True Az=175.995 Ze=-59.355 Az status=0008 Ze status=0009 16:27:27 Check angles 16:27:27 SkyScan query 16:27:28 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:27:28 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:27:28 Message to Master queued w/err=0: serial=14548 error=0 16:27:33 Received message from Master: op=Filter serial=14549 16:27:33 Color wheel filter change from 0 to 0 16:27:33 FLIGetFilterPos err=0 currentPosition=0 16:27:33 FLIGetStepsRemaining err=0 RemainingSteps=0 16:27:33 Filter is already there-color wheel unchanged 16:27:33 Received message from Master: op=Shutter serial=14550 16:27:33 Shutter LASER close 16:27:33 Received message from Camera: op=State serial=14552 16:27:33 GetSingleValue result=40 Value=cccccccc 16:27:33 SkyScan query 16:27:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:27:34 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:34 Parameters OK 16:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:34 Set A/D data flow result=40 16:27:34 Set A/D channel type result=40 16:27:34 Set A/D encoding result=40 16:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:34 Set channel filter=0.000000e+000 result=40 16:27:34 Config A/D Result=40 16:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:34 Get A/D filter: -9.255963e+061 result=40 16:27:34 Get A/D value=-858993460 result=40 16:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:34 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:27:34 Parameters OK 16:27:34 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:27:34 Set A/D data flow result=40 16:27:34 Set A/D channel type result=40 16:27:34 Set A/D encoding result=40 16:27:34 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:27:34 Set channel filter=0.000000e+000 result=40 16:27:34 Config A/D Result=40 16:27:34 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:27:34 Get A/D filter: -9.255963e+061 result=40 16:27:34 Get A/D value=-858993460 result=40 16:27:34 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:27:34 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:27:34 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:27:34 Aux= 16:27:34 Message to Camera, serial 14552 queued 16:28:05 Received message from Master: op=PointingHead serial=14559 16:28:05 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:28:05 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:28:05 Point started: ret=0 16:28:05 point_skyscan result=0 16:28:06 Check angles 16:28:06 SkyScan query 16:28:06 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.795<-13453 Statuses=0009 0009 16:28:06 Msec=0 True Az=152.97 Ze=-21.795 Az status=0009 Ze status=0009 16:28:07 Check angles 16:28:07 SkyScan query 16:28:07 SkyScan query done: ret=0 az=135.6<-9040 ze=-0.795<-12053 Statuses=0009 0009 16:28:07 Msec=750 True Az=135.6 Ze=-0.795 Az status=0009 Ze status=0009 16:28:07 Check angles 16:28:07 SkyScan query 16:28:08 SkyScan query done: ret=0 az=118.11<-7874 ze=20.175<-10655 Statuses=0009 0009 16:28:08 Msec=1500 True Az=118.11 Ze=20.175 Az status=0009 Ze status=0009 16:28:08 Check angles 16:28:08 SkyScan query 16:28:09 SkyScan query done: ret=0 az=100.62<-6708 ze=41.1<-9260 Statuses=0009 0009 16:28:09 Msec=2250 True Az=100.62 Ze=41.1 Az status=0009 Ze status=0009 16:28:09 Check angles 16:28:09 SkyScan query 16:28:09 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:28:09 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:28:10 Check angles 16:28:10 SkyScan query 16:28:10 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:28:10 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:28:10 Message to Master queued w/err=0: serial=14559 error=0 16:28:15 Received message from Master: op=Filter serial=14560 16:28:15 Color wheel filter change from 0 to 0 16:28:15 FLIGetFilterPos err=0 currentPosition=0 16:28:15 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:15 Filter is already there-color wheel unchanged 16:28:15 Received message from Master: op=Shutter serial=14561 16:28:15 Shutter LASER close 16:28:15 Received message from Camera: op=State serial=14563 16:28:15 GetSingleValue result=40 Value=cccccccc 16:28:15 SkyScan query 16:28:16 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:28:16 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:16 Parameters OK 16:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:16 Set A/D data flow result=40 16:28:16 Set A/D channel type result=40 16:28:16 Set A/D encoding result=40 16:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:16 Set channel filter=0.000000e+000 result=40 16:28:16 Config A/D Result=40 16:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:16 Get A/D filter: -9.255963e+061 result=40 16:28:16 Get A/D value=-858993460 result=40 16:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:16 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:16 Parameters OK 16:28:16 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:16 Set A/D data flow result=40 16:28:16 Set A/D channel type result=40 16:28:16 Set A/D encoding result=40 16:28:16 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:16 Set channel filter=0.000000e+000 result=40 16:28:16 Config A/D Result=40 16:28:16 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:16 Get A/D filter: -9.255963e+061 result=40 16:28:16 Get A/D value=-858993460 result=40 16:28:16 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:16 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:16 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:16 Aux= 16:28:16 Message to Camera, serial 14563 queued 16:28:47 Received message from Master: op=PointingHead serial=14570 16:28:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:28:47 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:28:47 Point started: ret=0 16:28:47 point_skyscan result=0 16:28:48 Check angles 16:28:48 SkyScan query 16:28:48 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 16:28:48 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 16:28:49 Check angles 16:28:49 SkyScan query 16:28:49 SkyScan query done: ret=0 az=126.615<-8441 ze=38.505<-9433 Statuses=0009 0008 16:28:49 Msec=750 True Az=126.615 Ze=38.505 Az status=0009 Ze status=0008 16:28:49 Check angles 16:28:49 SkyScan query 16:28:50 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 16:28:50 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 16:28:50 Check angles 16:28:50 SkyScan query 16:28:51 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 16:28:51 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 16:28:51 Check angles 16:28:51 SkyScan query 16:28:51 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 16:28:51 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 16:28:52 Check angles 16:28:52 SkyScan query 16:28:52 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:28:52 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:28:52 Message to Master queued w/err=0: serial=14570 error=0 16:28:57 Received message from Master: op=Filter serial=14571 16:28:57 Color wheel filter change from 0 to 0 16:28:57 FLIGetFilterPos err=0 currentPosition=0 16:28:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:28:57 Filter is already there-color wheel unchanged 16:28:57 Received message from Master: op=Shutter serial=14572 16:28:57 Shutter LASER close 16:28:57 Received message from Camera: op=State serial=14574 16:28:57 GetSingleValue result=40 Value=cccccccc 16:28:57 SkyScan query 16:28:58 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:28:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:58 Parameters OK 16:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:58 Set A/D data flow result=40 16:28:58 Set A/D channel type result=40 16:28:58 Set A/D encoding result=40 16:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:58 Set channel filter=0.000000e+000 result=40 16:28:58 Config A/D Result=40 16:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 [UTC 2018-12-4 16:28:58] 16:28:58 Get A/D filter: -9.255963e+061 result=40 16:28:58 Get A/D value=-858993460 result=40 16:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:28:58 Parameters OK 16:28:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:28:58 Set A/D data flow result=40 16:28:58 Set A/D channel type result=40 16:28:58 Set A/D encoding result=40 16:28:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:28:58 Set channel filter=0.000000e+000 result=40 16:28:58 Config A/D Result=40 16:28:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:28:58 Get A/D filter: -9.255963e+061 result=40 16:28:58 Get A/D value=-858993460 result=40 16:28:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:28:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:28:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:28:58 Aux= 16:28:58 Message to Camera, serial 14574 queued 16:29:29 Received message from Master: op=PointingHead serial=14581 16:29:29 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:29:29 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:29:29 Point started: ret=0 16:29:29 point_skyscan result=0 16:29:30 Check angles 16:29:30 SkyScan query 16:29:30 SkyScan query done: ret=0 az=153.18<-10212 ze=8.895<-11407 Statuses=0009 0009 16:29:30 Msec=0 True Az=153.18 Ze=8.895 Az status=0009 Ze status=0009 16:29:31 Check angles 16:29:31 SkyScan query 16:29:31 SkyScan query done: ret=0 az=135.78<-9052 ze=-12.045<-12803 Statuses=0009 0009 16:29:31 Msec=750 True Az=135.78 Ze=-12.045 Az status=0009 Ze status=0009 16:29:31 Check angles 16:29:31 SkyScan query 16:29:32 SkyScan query done: ret=0 az=118.215<-7881 ze=-32.985<-14199 Statuses=0009 0009 16:29:32 Msec=1500 True Az=118.215 Ze=-32.985 Az status=0009 Ze status=0009 16:29:32 Check angles 16:29:32 SkyScan query 16:29:33 SkyScan query done: ret=0 az=100.365<-6691 ze=-51.54<-15436 Statuses=0009 0009 16:29:33 Msec=2250 True Az=100.365 Ze=-51.54 Az status=0009 Ze status=0009 16:29:33 Check angles 16:29:33 SkyScan query 16:29:34 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 16:29:34 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 16:29:34 Check angles 16:29:34 SkyScan query 16:29:34 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:29:34 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:29:34 Message to Master queued w/err=0: serial=14581 error=0 16:29:39 Received message from Master: op=Filter serial=14582 16:29:39 Color wheel filter change from 0 to 0 16:29:39 FLIGetFilterPos err=0 currentPosition=0 16:29:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:29:39 Filter is already there-color wheel unchanged 16:29:39 Received message from Master: op=Shutter serial=14583 16:29:39 Shutter LASER close 16:29:39 Received message from Camera: op=State serial=14585 16:29:39 GetSingleValue result=40 Value=cccccccc 16:29:39 SkyScan query 16:29:40 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:29:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:40 Parameters OK 16:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:40 Set A/D data flow result=40 16:29:40 Set A/D channel type result=40 16:29:40 Set A/D encoding result=40 16:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:40 Set channel filter=0.000000e+000 result=40 16:29:40 Config A/D Result=40 16:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:40 Get A/D filter: -9.255963e+061 result=40 16:29:40 Get A/D value=-858993460 result=40 16:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:29:40 Parameters OK 16:29:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:29:40 Set A/D data flow result=40 16:29:40 Set A/D channel type result=40 16:29:40 Set A/D encoding result=40 16:29:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:29:40 Set channel filter=0.000000e+000 result=40 16:29:40 Config A/D Result=40 16:29:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:29:40 Get A/D filter: -9.255963e+061 result=40 16:29:40 Get A/D value=-858993460 result=40 16:29:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:29:40 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:29:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:29:40 Aux= 16:29:40 Message to Camera, serial 14585 queued 16:30:11 Received message from Master: op=PointingHead serial=14592 16:30:11 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:30:11 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:30:11 Point started: ret=0 16:30:11 point_skyscan result=0 16:30:12 Check angles 16:30:12 SkyScan query 16:30:13 SkyScan query done: ret=0 az=108.915<-7261 ze=-81.165<-17411 Statuses=0009 0009 16:30:13 Msec=0 True Az=108.915 Ze=-81.165 Az status=0009 Ze status=0009 16:30:13 Check angles 16:30:13 SkyScan query 16:30:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.525<-18835 Statuses=0008 0009 16:30:13 Msec=750 True Az=112.995 Ze=-102.525 Az status=0008 Ze status=0009 16:30:14 Check angles 16:30:14 SkyScan query 16:30:14 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.48<-20232 Statuses=0008 0009 16:30:14 Msec=1500 True Az=112.995 Ze=-123.48 Az status=0008 Ze status=0009 16:30:14 Check angles 16:30:14 SkyScan query 16:30:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.45<-21630 Statuses=0008 0009 16:30:15 Msec=2250 True Az=112.995 Ze=-144.45 Az status=0008 Ze status=0009 16:30:15 Check angles 16:30:15 SkyScan query 16:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.825<-23055 Statuses=0008 0009 16:30:16 Msec=3000 True Az=112.995 Ze=-165.825 Az status=0008 Ze status=0009 16:30:16 Check angles 16:30:16 SkyScan query 16:30:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:30:16 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:30:16 Message to Master queued w/err=0: serial=14592 error=0 16:30:21 Received message from Master: op=Filter serial=14593 16:30:21 Color wheel filter change from 0 to 0 16:30:21 FLIGetFilterPos err=0 currentPosition=0 16:30:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:21 Filter is already there-color wheel unchanged 16:30:22 Received message from Master: op=Shutter serial=14594 16:30:22 Shutter LASER open 16:30:22 Received message from Camera: op=State serial=14596 16:30:22 GetSingleValue result=40 Value=cccccccc 16:30:22 SkyScan query 16:30:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:30:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:22 Parameters OK 16:30:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:22 Set A/D data flow result=40 16:30:22 Set A/D channel type result=40 16:30:22 Set A/D encoding result=40 16:30:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:22 Set channel filter=0.000000e+000 result=40 16:30:22 Config A/D Result=40 16:30:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:22 Get A/D filter: -9.255963e+061 result=40 16:30:22 Get A/D value=-858993460 result=40 16:30:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:22 Parameters OK 16:30:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:22 Set A/D data flow result=40 16:30:22 Set A/D channel type result=40 16:30:22 Set A/D encoding result=40 16:30:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:22 Set channel filter=0.000000e+000 result=40 16:30:22 Config A/D Result=40 16:30:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:22 Get A/D filter: -9.255963e+061 result=40 16:30:22 Get A/D value=-858993460 result=40 16:30:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:22 Aux= 16:30:22 Message to Camera, serial 14596 queued 16:30:25 Received message from Master: op=Shutter serial=14600 16:30:25 Shutter LASER close 16:30:25 Received message from Master: op=PointingHead serial=14604 16:30:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:30:25 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:30:26 Point started: ret=0 16:30:26 point_skyscan result=0 16:30:26 Check angles 16:30:26 SkyScan query 16:30:27 SkyScan query done: ret=0 az=89.85<-5990 ze=157.26<-1516 Statuses=0009 0009 16:30:27 Msec=0 True Az=89.85 Ze=157.26 Az status=0009 Ze status=0009 16:30:27 Check angles 16:30:27 SkyScan query 16:30:28 SkyScan query done: ret=0 az=72.39<-4826 ze=136.275<-2915 Statuses=0009 0009 16:30:28 Msec=750 True Az=72.39 Ze=136.275 Az status=0009 Ze status=0009 16:30:28 Check angles 16:30:28 SkyScan query 16:30:28 SkyScan query done: ret=0 az=54.99<-3666 ze=115.32<-4312 Statuses=0009 0009 16:30:28 Msec=1500 True Az=54.99 Ze=115.32 Az status=0009 Ze status=0009 16:30:29 Check angles 16:30:29 SkyScan query 16:30:29 SkyScan query done: ret=0 az=40.845<-2723 ze=94.335<-5711 Statuses=0009 0009 16:30:29 Msec=2250 True Az=40.845 Ze=94.335 Az status=0009 Ze status=0009 16:30:29 Check angles 16:30:29 SkyScan query 16:30:30 SkyScan query done: ret=0 az=40.995<-2733 ze=73.41<-7106 Statuses=0008 0009 16:30:30 Msec=3000 True Az=40.995 Ze=73.41 Az status=0008 Ze status=0009 16:30:30 Check angles 16:30:30 SkyScan query 16:30:31 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 16:30:31 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 16:30:31 Check angles 16:30:31 SkyScan query 16:30:31 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:30:31 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:30:31 Message to Master queued w/err=0: serial=14604 error=0 16:30:36 Received message from Master: op=Filter serial=14605 16:30:36 Color wheel filter change from 0 to 0 16:30:36 FLIGetFilterPos err=0 currentPosition=0 16:30:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:30:36 Filter is already there-color wheel unchanged 16:30:37 Received message from Master: op=Shutter serial=14606 16:30:37 Shutter LASER close 16:30:37 Received message from Camera: op=State serial=14608 16:30:37 GetSingleValue result=40 Value=cccccccc 16:30:37 SkyScan query 16:30:37 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:30:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:37 Parameters OK 16:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:37 Set A/D data flow result=40 16:30:37 Set A/D channel type result=40 16:30:37 Set A/D encoding result=40 16:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:37 Set channel filter=0.000000e+000 result=40 16:30:37 Config A/D Result=40 16:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:37 Get A/D filter: -9.255963e+061 result=40 16:30:37 Get A/D value=-858993460 result=40 16:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:30:37 Parameters OK 16:30:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:30:37 Set A/D data flow result=40 16:30:37 Set A/D channel type result=40 16:30:37 Set A/D encoding result=40 16:30:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:30:37 Set channel filter=0.000000e+000 result=40 16:30:37 Config A/D Result=40 16:30:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:30:37 Get A/D filter: -9.255963e+061 result=40 16:30:37 Get A/D value=-858993460 result=40 16:30:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:30:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:30:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:30:37 Aux= 16:30:37 Message to Camera, serial 14608 queued 16:31:08 Received message from Master: op=PointingHead serial=14615 16:31:08 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:31:08 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:31:09 Point started: ret=0 16:31:09 point_skyscan result=0 16:31:09 Check angles 16:31:09 SkyScan query 16:31:10 SkyScan query done: ret=0 az=40.995<-2733 ze=21.33<-10578 Statuses=0008 0009 16:31:10 Msec=0 True Az=40.995 Ze=21.33 Az status=0008 Ze status=0009 16:31:10 Check angles 16:31:10 SkyScan query 16:31:11 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.075<-12005 Statuses=0008 0009 16:31:11 Msec=750 True Az=40.995 Ze=-0.075 Az status=0008 Ze status=0009 16:31:11 Check angles 16:31:11 SkyScan query 16:31:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.015<-13401 Statuses=0008 0009 16:31:12 Msec=1500 True Az=40.995 Ze=-21.015 Az status=0008 Ze status=0009 16:31:12 Check angles 16:31:12 SkyScan query 16:31:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 16:31:12 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 16:31:12 Check angles 16:31:12 SkyScan query 16:31:13 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 16:31:13 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 16:31:13 Message to Master queued w/err=0: serial=14615 error=0 16:31:18 Received message from Master: op=Filter serial=14616 16:31:18 Color wheel filter change from 0 to 0 16:31:18 FLIGetFilterPos err=0 currentPosition=0 16:31:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:31:18 Filter is already there-color wheel unchanged 16:31:18 Received message from Master: op=Shutter serial=14617 16:31:18 Shutter LASER close 16:31:18 Received message from Camera: op=State serial=14619 16:31:18 GetSingleValue result=40 Value=cccccccc 16:31:18 SkyScan query 16:31:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:31:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:19 Parameters OK 16:31:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:19 Set A/D data flow result=40 16:31:19 Set A/D channel type result=40 16:31:19 Set A/D encoding result=40 16:31:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:19 Set channel filter=0.000000e+000 result=40 16:31:19 Config A/D Result=40 16:31:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:19 Get A/D filter: -9.255963e+061 result=40 16:31:19 Get A/D value=-858993460 result=40 16:31:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:31:19 Parameters OK 16:31:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:31:19 Set A/D data flow result=40 16:31:19 Set A/D channel type result=40 16:31:19 Set A/D encoding result=40 16:31:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:31:19 Set channel filter=0.000000e+000 result=40 16:31:19 Config A/D Result=40 16:31:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:31:19 Get A/D filter: -9.255963e+061 result=40 16:31:19 Get A/D value=-858993460 result=40 16:31:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:31:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:31:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:31:19 Aux= 16:31:19 Message to Camera, serial 14619 queued 16:31:50 Received message from Master: op=PointingHead serial=14626 16:31:50 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:31:50 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:31:50 Point started: ret=0 16:31:50 point_skyscan result=0 16:31:51 Check angles 16:31:51 SkyScan query 16:31:51 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.325<-16555 Statuses=0009 0009 16:31:51 Msec=0 True Az=63.87 Ze=-68.325 Az status=0009 Ze status=0009 16:31:52 Check angles 16:31:52 SkyScan query 16:31:52 SkyScan query done: ret=0 az=81.54<-5436 ze=-89.295<-17953 Statuses=0009 0009 16:31:52 Msec=750 True Az=81.54 Ze=-89.295 Az status=0009 Ze status=0009 16:31:52 Check angles 16:31:52 SkyScan query 16:31:53 SkyScan query done: ret=0 az=99.075<-6605 ze=-110.22<-19348 Statuses=0009 0009 16:31:53 Msec=1500 True Az=99.075 Ze=-110.22 Az status=0009 Ze status=0009 16:31:53 Check angles 16:31:53 SkyScan query 16:31:54 SkyScan query done: ret=0 az=116.505<-7767 ze=-131.175<-20745 Statuses=0009 0009 16:31:54 Msec=2250 True Az=116.505 Ze=-131.175 Az status=0009 Ze status=0009 16:31:54 Check angles 16:31:54 SkyScan query 16:31:54 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:31:54 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:31:55 Check angles 16:31:55 SkyScan query 16:31:55 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:31:55 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:31:55 Message to Master queued w/err=0: serial=14626 error=0 16:32:00 Received message from Master: op=Filter serial=14627 16:32:00 Color wheel filter change from 0 to 0 16:32:00 FLIGetFilterPos err=0 currentPosition=0 16:32:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:00 Filter is already there-color wheel unchanged 16:32:00 Received message from Master: op=Shutter serial=14628 16:32:00 Shutter LASER close 16:32:00 Received message from Camera: op=State serial=14630 16:32:00 GetSingleValue result=40 Value=cccccccc 16:32:00 SkyScan query 16:32:01 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:32:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:01 Parameters OK 16:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:01 Set A/D data flow result=40 16:32:01 Set A/D channel type result=40 16:32:01 Set A/D encoding result=40 16:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:01 Set channel filter=0.000000e+000 result=40 16:32:01 Config A/D Result=40 16:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:01 Get A/D filter: -9.255963e+061 result=40 16:32:01 Get A/D value=-858993460 result=40 16:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:01 Parameters OK 16:32:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:01 Set A/D data flow result=40 16:32:01 Set A/D channel type result=40 16:32:01 Set A/D encoding result=40 16:32:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:01 Set channel filter=0.000000e+000 result=40 16:32:01 Config A/D Result=40 16:32:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:01 Get A/D filter: -9.255963e+061 result=40 16:32:01 Get A/D value=-858993460 result=40 16:32:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:01 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:01 Aux= 16:32:01 Message to Camera, serial 14630 queued [UTC 2018-12-4 16:32:09] 16:32:32 Received message from Master: op=PointingHead serial=14637 16:32:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:32:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:32:32 Point started: ret=0 16:32:32 point_skyscan result=0 16:32:33 Check angles 16:32:33 SkyScan query 16:32:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.18<-23412 Statuses=0009 0009 16:32:33 Msec=0 True Az=113.01 Ze=-171.18 Az status=0009 Ze status=0009 16:32:34 Check angles 16:32:34 SkyScan query 16:32:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:32:34 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:32:34 Message to Master queued w/err=0: serial=14637 error=0 16:32:39 Received message from Master: op=Filter serial=14638 16:32:39 Color wheel filter change from 0 to 0 16:32:39 FLIGetFilterPos err=0 currentPosition=0 16:32:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:39 Filter is already there-color wheel unchanged 16:32:39 Received message from Master: op=Shutter serial=14639 16:32:39 Shutter LASER open 16:32:40 Received message from Camera: op=State serial=14641 16:32:40 GetSingleValue result=40 Value=cccccccc 16:32:40 SkyScan query 16:32:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:32:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:40 Parameters OK 16:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:40 Set A/D data flow result=40 16:32:40 Set A/D channel type result=40 16:32:40 Set A/D encoding result=40 16:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:40 Set channel filter=0.000000e+000 result=40 16:32:40 Config A/D Result=40 16:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:40 Get A/D filter: -9.255963e+061 result=40 16:32:40 Get A/D value=-858993460 result=40 16:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:40 Parameters OK 16:32:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:40 Set A/D data flow result=40 16:32:40 Set A/D channel type result=40 16:32:40 Set A/D encoding result=40 16:32:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:40 Set channel filter=0.000000e+000 result=40 16:32:40 Config A/D Result=40 16:32:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:40 Get A/D filter: -9.255963e+061 result=40 16:32:40 Get A/D value=-858993460 result=40 16:32:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:40 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:40 Aux= 16:32:40 Message to Camera, serial 14641 queued 16:32:43 Received message from Master: op=Shutter serial=14645 16:32:43 Shutter LASER close 16:32:43 Received message from Master: op=PointingHead serial=14649 16:32:43 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:32:43 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:32:43 Point started: ret=0 16:32:43 point_skyscan result=0 16:32:44 Check angles 16:32:44 SkyScan query 16:32:45 SkyScan query done: ret=0 az=136.155<-9077 ze=-142.935<-21529 Statuses=0009 0009 16:32:45 Msec=0 True Az=136.155 Ze=-142.935 Az status=0009 Ze status=0009 16:32:45 Check angles 16:32:45 SkyScan query 16:32:46 SkyScan query done: ret=0 az=154.14<-10276 ze=-121.53<-20102 Statuses=0009 0009 16:32:46 Msec=750 True Az=154.14 Ze=-121.53 Az status=0009 Ze status=0009 16:32:46 Check angles 16:32:46 SkyScan query 16:32:46 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.515<-18701 Statuses=0009 0009 16:32:46 Msec=1500 True Az=171.51 Ze=-100.515 Az status=0009 Ze status=0009 16:32:47 Check angles 16:32:47 SkyScan query 16:32:47 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.65<-17310 Statuses=0008 0009 16:32:47 Msec=2250 True Az=176.025 Ze=-79.65 Az status=0008 Ze status=0009 16:32:47 Check angles 16:32:47 SkyScan query 16:32:48 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.665<-15911 Statuses=0008 0009 16:32:48 Msec=3000 True Az=176.01 Ze=-58.665 Az status=0008 Ze status=0009 16:32:48 Check angles 16:32:48 SkyScan query 16:32:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:32:49 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:32:49 Message to Master queued w/err=0: serial=14649 error=0 16:32:54 Received message from Master: op=Filter serial=14650 16:32:54 Color wheel filter change from 0 to 0 16:32:54 FLIGetFilterPos err=0 currentPosition=0 16:32:54 FLIGetStepsRemaining err=0 RemainingSteps=0 16:32:54 Filter is already there-color wheel unchanged 16:32:54 Received message from Master: op=Shutter serial=14651 16:32:54 Shutter LASER close 16:32:54 Received message from Camera: op=State serial=14653 16:32:54 GetSingleValue result=40 Value=cccccccc 16:32:54 SkyScan query 16:32:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:32:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:55 Parameters OK 16:32:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:55 Set A/D data flow result=40 16:32:55 Set A/D channel type result=40 16:32:55 Set A/D encoding result=40 16:32:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:55 Set channel filter=0.000000e+000 result=40 16:32:55 Config A/D Result=40 16:32:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:55 Get A/D filter: -9.255963e+061 result=40 16:32:55 Get A/D value=-858993460 result=40 16:32:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:32:55 Parameters OK 16:32:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:32:55 Set A/D data flow result=40 16:32:55 Set A/D channel type result=40 16:32:55 Set A/D encoding result=40 16:32:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:32:55 Set channel filter=0.000000e+000 result=40 16:32:55 Config A/D Result=40 16:32:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:32:55 Get A/D filter: -9.255963e+061 result=40 16:32:55 Get A/D value=-858993460 result=40 16:32:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:32:55 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:32:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:32:55 Aux= 16:32:55 Message to Camera, serial 14653 queued 16:33:25 Received message from Master: op=PointingHead serial=14660 16:33:25 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:33:25 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:33:26 Point started: ret=0 16:33:26 point_skyscan result=0 16:33:26 Check angles 16:33:26 SkyScan query 16:33:27 SkyScan query done: ret=0 az=152.985<-10199 ze=-21.735<-13449 Statuses=0009 0009 16:33:27 Msec=0 True Az=152.985 Ze=-21.735 Az status=0009 Ze status=0009 16:33:27 Check angles 16:33:27 SkyScan query 16:33:28 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.75<-12050 Statuses=0009 0009 16:33:28 Msec=750 True Az=135.435 Ze=-0.75 Az status=0009 Ze status=0009 16:33:28 Check angles 16:33:28 SkyScan query 16:33:29 SkyScan query done: ret=0 az=118.035<-7869 ze=20.205<-10653 Statuses=0009 0009 16:33:29 Msec=1500 True Az=118.035 Ze=20.205 Az status=0009 Ze status=0009 16:33:29 Check angles 16:33:29 SkyScan query 16:33:29 SkyScan query done: ret=0 az=100.635<-6709 ze=41.145<-9257 Statuses=0009 0009 16:33:29 Msec=2250 True Az=100.635 Ze=41.145 Az status=0009 Ze status=0009 16:33:29 Check angles 16:33:29 SkyScan query 16:33:30 SkyScan query done: ret=0 az=86.025<-5735 ze=51.57<-8562 Statuses=0009 0008 16:33:30 Msec=3000 True Az=86.025 Ze=51.57 Az status=0009 Ze status=0008 16:33:30 Check angles 16:33:30 SkyScan query 16:33:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:33:31 Msec=3750 True Az=85.995 Ze=51.495 Az status=0008 Ze status=0008 16:33:31 Message to Master queued w/err=0: serial=14660 error=0 16:33:36 Received message from Master: op=Filter serial=14661 16:33:36 Color wheel filter change from 0 to 0 16:33:36 FLIGetFilterPos err=0 currentPosition=0 16:33:36 FLIGetStepsRemaining err=0 RemainingSteps=0 16:33:36 Filter is already there-color wheel unchanged 16:33:36 Received message from Master: op=Shutter serial=14662 16:33:36 Shutter LASER close 16:33:36 Received message from Camera: op=State serial=14664 16:33:36 GetSingleValue result=40 Value=cccccccc 16:33:36 SkyScan query 16:33:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:33:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:37 Parameters OK 16:33:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:37 Set A/D data flow result=40 16:33:37 Set A/D channel type result=40 16:33:37 Set A/D encoding result=40 16:33:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:37 Set channel filter=0.000000e+000 result=40 16:33:37 Config A/D Result=40 16:33:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:37 Get A/D filter: -9.255963e+061 result=40 16:33:37 Get A/D value=-858993460 result=40 16:33:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:33:37 Parameters OK 16:33:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:33:37 Set A/D data flow result=40 16:33:37 Set A/D channel type result=40 16:33:37 Set A/D encoding result=40 16:33:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:33:37 Set channel filter=0.000000e+000 result=40 16:33:37 Config A/D Result=40 16:33:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:33:37 Get A/D filter: -9.255963e+061 result=40 16:33:37 Get A/D value=-858993460 result=40 16:33:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:33:37 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:33:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:33:37 Aux= 16:33:37 Message to Camera, serial 14664 queued 16:34:07 Received message from Master: op=PointingHead serial=14671 16:34:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:34:07 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:34:08 Point started: ret=0 16:34:08 point_skyscan result=0 16:34:09 Check angles 16:34:09 SkyScan query 16:34:09 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 16:34:09 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 16:34:09 Check angles 16:34:09 SkyScan query 16:34:10 SkyScan query done: ret=0 az=127.185<-8479 ze=38.505<-9433 Statuses=0009 0008 16:34:10 Msec=750 True Az=127.185 Ze=38.505 Az status=0009 Ze status=0008 16:34:10 Check angles 16:34:10 SkyScan query 16:34:11 SkyScan query done: ret=0 az=144.63<-9642 ze=38.505<-9433 Statuses=0009 0008 16:34:11 Msec=1500 True Az=144.63 Ze=38.505 Az status=0009 Ze status=0008 16:34:11 Check angles 16:34:11 SkyScan query 16:34:11 SkyScan query done: ret=0 az=162.21<-10814 ze=38.505<-9433 Statuses=0009 0008 16:34:11 Msec=2250 True Az=162.21 Ze=38.505 Az status=0009 Ze status=0008 16:34:12 Check angles 16:34:12 SkyScan query 16:34:12 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:34:12 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:34:12 Check angles 16:34:12 SkyScan query 16:34:13 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:34:13 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:34:13 Message to Master queued w/err=0: serial=14671 error=0 16:34:18 Received message from Master: op=Filter serial=14672 16:34:18 Color wheel filter change from 0 to 0 16:34:18 FLIGetFilterPos err=0 currentPosition=0 16:34:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:34:18 Filter is already there-color wheel unchanged 16:34:18 Received message from Master: op=Shutter serial=14673 16:34:18 Shutter LASER close 16:34:18 Received message from Camera: op=State serial=14675 16:34:18 GetSingleValue result=40 Value=cccccccc 16:34:18 SkyScan query 16:34:19 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:34:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:19 Parameters OK 16:34:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:19 Set A/D data flow result=40 16:34:19 Set A/D channel type result=40 16:34:19 Set A/D encoding result=40 16:34:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:19 Set channel filter=0.000000e+000 result=40 16:34:19 Config A/D Result=40 16:34:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:19 Get A/D filter: -9.255963e+061 result=40 16:34:19 Get A/D value=-858993460 result=40 16:34:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:34:19 Parameters OK 16:34:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:34:19 Set A/D data flow result=40 16:34:19 Set A/D channel type result=40 16:34:19 Set A/D encoding result=40 16:34:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:34:19 Set channel filter=0.000000e+000 result=40 16:34:19 Config A/D Result=40 16:34:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:34:19 Get A/D filter: -9.255963e+061 result=40 16:34:19 Get A/D value=-858993460 result=40 16:34:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:34:19 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:34:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:34:19 Aux= 16:34:19 Message to Camera, serial 14675 queued 16:34:50 Received message from Master: op=PointingHead serial=14682 16:34:50 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:34:50 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:34:50 Point started: ret=0 16:34:50 point_skyscan result=0 16:34:51 Check angles 16:34:51 SkyScan query 16:34:51 SkyScan query done: ret=0 az=152.925<-10195 ze=8.505<-11433 Statuses=0009 0009 16:34:51 Msec=0 True Az=152.925 Ze=8.505 Az status=0009 Ze status=0009 16:34:51 Check angles 16:34:51 SkyScan query 16:34:52 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.435<-12829 Statuses=0009 0009 16:34:52 Msec=750 True Az=135.45 Ze=-12.435 Az status=0009 Ze status=0009 16:34:52 Check angles 16:34:52 SkyScan query 16:34:53 SkyScan query done: ret=0 az=117.45<-7830 ze=-33.78<-14252 Statuses=0009 0009 16:34:53 Msec=1500 True Az=117.45 Ze=-33.78 Az status=0009 Ze status=0009 16:34:53 Check angles 16:34:53 SkyScan query 16:34:54 SkyScan query done: ret=0 az=99.765<-6651 ze=-51.555<-15437 Statuses=0009 0009 16:34:54 Msec=2250 True Az=99.765 Ze=-51.555 Az status=0009 Ze status=0009 16:34:54 Check angles 16:34:54 SkyScan query 16:34:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 16:34:54 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 16:34:54 Check angles 16:34:54 SkyScan query 16:34:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:34:55 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:34:55 Message to Master queued w/err=0: serial=14682 error=0 16:35:00 Received message from Master: op=Filter serial=14683 16:35:00 Color wheel filter change from 0 to 0 16:35:00 FLIGetFilterPos err=0 currentPosition=0 16:35:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:00 Filter is already there-color wheel unchanged 16:35:00 Received message from Master: op=Shutter serial=14684 16:35:00 Shutter LASER close 16:35:00 Received message from Camera: op=State serial=14686 16:35:00 GetSingleValue result=40 Value=cccccccc 16:35:00 SkyScan query 16:35:01 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:35:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:01 Parameters OK 16:35:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:01 Set A/D data flow result=40 16:35:01 Set A/D channel type result=40 16:35:01 Set A/D encoding result=40 16:35:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:01 Set channel filter=0.000000e+000 result=40 16:35:01 Config A/D Result=40 16:35:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:01 Get A/D filter: -9.255963e+061 result=40 16:35:01 Get A/D value=-858993460 result=40 16:35:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:01 Parameters OK 16:35:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:01 Set A/D data flow result=40 16:35:01 Set A/D channel type result=40 16:35:01 Set A/D encoding result=40 16:35:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:01 Set channel filter=0.000000e+000 result=40 16:35:01 Config A/D Result=40 16:35:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:01 Get A/D filter: -9.255963e+061 result=40 16:35:01 Get A/D value=-858993460 result=40 16:35:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:01 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:01 Aux= 16:35:01 Message to Camera, serial 14686 queued 16:35:32 Received message from Master: op=PointingHead serial=14693 16:35:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:35:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:35:32 Point started: ret=0 16:35:32 point_skyscan result=0 16:35:33 Check angles 16:35:33 SkyScan query 16:35:33 SkyScan query done: ret=0 az=108.75<-7250 ze=-81.03<-17402 Statuses=0009 0009 16:35:33 Msec=0 True Az=108.75 Ze=-81.03 Az status=0009 Ze status=0009 16:35:33 Check angles 16:35:33 SkyScan query 16:35:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.985<-18799 Statuses=0008 0009 16:35:34 Msec=750 True Az=112.995 Ze=-101.985 Az status=0008 Ze status=0009 16:35:34 Check angles 16:35:34 SkyScan query 16:35:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.36<-20224 Statuses=0008 0009 16:35:35 Msec=1500 True Az=112.995 Ze=-123.36 Az status=0008 Ze status=0009 16:35:35 Check angles 16:35:35 SkyScan query 16:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.735<-21649 Statuses=0008 0009 16:35:36 Msec=2250 True Az=112.995 Ze=-144.735 Az status=0008 Ze status=0009 16:35:36 Check angles 16:35:36 SkyScan query 16:35:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.69<-23046 Statuses=0008 0009 16:35:36 Msec=3000 True Az=112.995 Ze=-165.69 Az status=0008 Ze status=0009 16:35:37 Check angles 16:35:37 SkyScan query 16:35:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:35:37 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:35:37 Message to Master queued w/err=0: serial=14693 error=0 16:35:42 Received message from Master: op=Filter serial=14694 16:35:42 Color wheel filter change from 0 to 0 16:35:42 FLIGetFilterPos err=0 currentPosition=0 16:35:42 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:42 Filter is already there-color wheel unchanged 16:35:42 Received message from Master: op=Shutter serial=14695 16:35:42 Shutter LASER open 16:35:42 Received message from Camera: op=State serial=14697 16:35:42 GetSingleValue result=40 Value=cccccccc 16:35:42 SkyScan query 16:35:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:35:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:43 Parameters OK 16:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:43 Set A/D data flow result=40 16:35:43 Set A/D channel type result=40 16:35:43 Set A/D encoding result=40 16:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:43 Set channel filter=0.000000e+000 result=40 16:35:43 Config A/D Result=40 16:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:43 Get A/D filter: -9.255963e+061 result=40 16:35:43 Get A/D value=-858993460 result=40 16:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:43 Parameters OK 16:35:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:43 Set A/D data flow result=40 16:35:43 Set A/D channel type result=40 16:35:43 Set A/D encoding result=40 16:35:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:43 Set channel filter=0.000000e+000 result=40 16:35:43 Config A/D Result=40 16:35:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:43 Get A/D filter: -9.255963e+061 result=40 16:35:43 Get A/D value=-858993460 result=40 16:35:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:43 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:43 Aux= 16:35:43 Message to Camera, serial 14697 queued 16:35:46 Received message from Master: op=Shutter serial=14701 16:35:46 Shutter LASER close 16:35:46 Received message from Master: op=PointingHead serial=14705 16:35:46 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:35:46 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:35:46 Point started: ret=0 16:35:46 point_skyscan result=0 16:35:47 Check angles 16:35:47 SkyScan query 16:35:48 SkyScan query done: ret=0 az=90.06<-6004 ze=157.455<-1503 Statuses=0009 0009 16:35:48 Msec=0 True Az=90.06 Ze=157.455 Az status=0009 Ze status=0009 16:35:48 Check angles 16:35:48 SkyScan query 16:35:48 SkyScan query done: ret=0 az=72.225<-4815 ze=136.02<-2932 Statuses=0009 0009 16:35:48 Msec=750 True Az=72.225 Ze=136.02 Az status=0009 Ze status=0009 16:35:49 Check angles 16:35:49 SkyScan query 16:35:49 SkyScan query done: ret=0 az=54.84<-3656 ze=115.125<-4325 Statuses=0009 0009 16:35:49 Msec=1500 True Az=54.84 Ze=115.125 Az status=0009 Ze status=0009 16:35:49 Check angles 16:35:49 SkyScan query 16:35:50 SkyScan query done: ret=0 az=40.86<-2724 ze=94.125<-5725 Statuses=0009 0009 16:35:50 Msec=2250 True Az=40.86 Ze=94.125 Az status=0009 Ze status=0009 16:35:50 Check angles 16:35:50 SkyScan query 16:35:51 SkyScan query done: ret=0 az=40.995<-2733 ze=73.185<-7121 Statuses=0008 0009 16:35:51 Msec=3000 True Az=40.995 Ze=73.185 Az status=0008 Ze status=0009 16:35:51 Check angles 16:35:51 SkyScan query 16:35:51 SkyScan query done: ret=0 az=40.995<-2733 ze=52.68<-8488 Statuses=0008 0009 16:35:51 Msec=3750 True Az=40.995 Ze=52.68 Az status=0008 Ze status=0009 16:35:52 Check angles 16:35:52 SkyScan query 16:35:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:35:52 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:35:52 Message to Master queued w/err=0: serial=14705 error=0 16:35:57 Received message from Master: op=Filter serial=14706 16:35:57 Color wheel filter change from 0 to 0 16:35:57 FLIGetFilterPos err=0 currentPosition=0 16:35:57 FLIGetStepsRemaining err=0 RemainingSteps=0 16:35:57 Filter is already there-color wheel unchanged 16:35:57 Received message from Master: op=Shutter serial=14707 16:35:57 Shutter LASER close 16:35:58 Received message from Camera: op=State serial=14709 16:35:58 GetSingleValue result=40 Value=cccccccc 16:35:58 SkyScan query 16:35:58 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:35:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:58 Parameters OK 16:35:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:58 Set A/D data flow result=40 16:35:58 Set A/D channel type result=40 16:35:58 Set A/D encoding result=40 16:35:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:58 Set channel filter=0.000000e+000 result=40 16:35:58 Config A/D Result=40 16:35:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:58 Get A/D filter: -9.255963e+061 result=40 16:35:58 Get A/D value=-858993460 result=40 16:35:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:35:58 Parameters OK 16:35:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:35:58 Set A/D data flow result=40 16:35:58 Set A/D channel type result=40 16:35:58 Set A/D encoding result=40 16:35:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:35:58 Set channel filter=0.000000e+000 result=40 16:35:58 Config A/D Result=40 16:35:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:35:58 Get A/D filter: -9.255963e+061 result=40 16:35:58 Get A/D value=-858993460 result=40 16:35:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:35:58 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:35:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:35:58 Aux= 16:35:58 Message to Camera, serial 14709 queued 16:36:29 Received message from Master: op=PointingHead serial=14716 16:36:29 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:36:29 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:36:29 Point started: ret=0 16:36:29 point_skyscan result=0 16:36:30 Check angles 16:36:30 SkyScan query 16:36:31 SkyScan query done: ret=0 az=40.995<-2733 ze=21.585<-10561 Statuses=0008 0009 16:36:31 Msec=0 True Az=40.995 Ze=21.585 Az status=0008 Ze status=0009 16:36:31 Check angles 16:36:31 SkyScan query 16:36:31 SkyScan query done: ret=0 az=40.995<-2733 ze=0.585<-11961 Statuses=0008 0009 16:36:31 Msec=750 True Az=40.995 Ze=0.585 Az status=0008 Ze status=0009 16:36:32 Check angles 16:36:32 SkyScan query 16:36:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.775<-13385 Statuses=0008 0009 16:36:32 Msec=1500 True Az=40.995 Ze=-20.775 Az status=0008 Ze status=0009 16:36:32 Check angles 16:36:32 SkyScan query 16:36:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 16:36:33 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 16:36:33 Check angles 16:36:33 SkyScan query 16:36:34 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 16:36:34 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 16:36:34 Message to Master queued w/err=0: serial=14716 error=0 16:36:39 Received message from Master: op=Filter serial=14717 16:36:39 Color wheel filter change from 0 to 0 16:36:39 FLIGetFilterPos err=0 currentPosition=0 16:36:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:36:39 Filter is already there-color wheel unchanged 16:36:39 Received message from Master: op=Shutter serial=14718 16:36:39 Shutter LASER close 16:36:39 Received message from Camera: op=State serial=14720 16:36:39 GetSingleValue result=40 Value=cccccccc 16:36:39 SkyScan query 16:36:40 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:36:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:40 Parameters OK 16:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:40 Set A/D data flow result=40 16:36:40 Set A/D channel type result=40 16:36:40 Set A/D encoding result=40 16:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:40 Set channel filter=0.000000e+000 result=40 16:36:40 Config A/D Result=40 16:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:40 Get A/D filter: -9.255963e+061 result=40 16:36:40 Get A/D value=-858993460 result=40 16:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:36:40 Parameters OK 16:36:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:36:40 Set A/D data flow result=40 16:36:40 Set A/D channel type result=40 16:36:40 Set A/D encoding result=40 16:36:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:36:40 Set channel filter=0.000000e+000 result=40 16:36:40 Config A/D Result=40 16:36:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:36:40 Get A/D filter: -9.255963e+061 result=40 16:36:40 Get A/D value=-858993460 result=40 16:36:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:36:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:36:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:36:40 Aux= 16:36:40 Message to Camera, serial 14720 queued 16:37:10 Received message from Master: op=PointingHead serial=14727 16:37:10 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:37:10 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:37:11 Point started: ret=0 16:37:11 point_skyscan result=0 16:37:12 Check angles 16:37:12 SkyScan query 16:37:12 SkyScan query done: ret=0 az=64.185<-4279 ze=-68.655<-16577 Statuses=0009 0009 16:37:12 Msec=0 True Az=64.185 Ze=-68.655 Az status=0009 Ze status=0009 16:37:12 Check angles 16:37:12 SkyScan query 16:37:13 SkyScan query done: ret=0 az=81.84<-5456 ze=-89.625<-17975 Statuses=0009 0009 16:37:13 Msec=750 True Az=81.84 Ze=-89.625 Az status=0009 Ze status=0009 16:37:13 Check angles 16:37:13 SkyScan query 16:37:14 SkyScan query done: ret=0 az=99.315<-6621 ze=-110.565<-19371 Statuses=0009 0009 16:37:14 Msec=1500 True Az=99.315 Ze=-110.565 Az status=0009 Ze status=0009 16:37:14 Check angles 16:37:14 SkyScan query 16:37:14 SkyScan query done: ret=0 az=117.09<-7806 ze=-131.94<-20796 Statuses=0009 0009 16:37:14 Msec=2250 True Az=117.09 Ze=-131.94 Az status=0009 Ze status=0009 16:37:15 Check angles 16:37:15 SkyScan query 16:37:15 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:37:15 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:37:15 Check angles 16:37:15 SkyScan query 16:37:16 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:37:16 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:37:16 Message to Master queued w/err=0: serial=14727 error=0 16:37:21 Received message from Master: op=Filter serial=14728 16:37:21 Color wheel filter change from 0 to 0 16:37:21 FLIGetFilterPos err=0 currentPosition=0 16:37:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:37:21 Filter is already there-color wheel unchanged 16:37:21 Received message from Master: op=Shutter serial=14729 16:37:21 Shutter LASER close 16:37:21 Received message from Camera: op=State serial=14731 16:37:21 GetSingleValue result=40 Value=cccccccc 16:37:21 SkyScan query 16:37:22 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:37:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:22 Parameters OK 16:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:22 Set A/D data flow result=40 16:37:22 Set A/D channel type result=40 16:37:22 Set A/D encoding result=40 16:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:22 Set channel filter=0.000000e+000 result=40 16:37:22 Config A/D Result=40 16:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:22 Get A/D filter: -9.255963e+061 result=40 16:37:22 Get A/D value=-858993460 result=40 16:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:37:22 Parameters OK 16:37:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:37:22 Set A/D data flow result=40 16:37:22 Set A/D channel type result=40 16:37:22 Set A/D encoding result=40 16:37:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:37:22 Set channel filter=0.000000e+000 result=40 16:37:22 Config A/D Result=40 16:37:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:37:22 Get A/D filter: -9.255963e+061 result=40 16:37:22 Get A/D value=-858993460 result=40 16:37:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:37:22 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:37:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:37:22 Aux= 16:37:22 Message to Camera, serial 14731 queued 16:37:52 Received message from Master: op=PointingHead serial=14738 16:37:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:37:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:37:53 Point started: ret=0 16:37:53 point_skyscan result=0 16:37:54 Check angles 16:37:54 SkyScan query 16:37:54 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.3<-23420 Statuses=0009 0009 16:37:54 Msec=0 True Az=113.01 Ze=-171.3 Az status=0009 Ze status=0009 16:37:54 Check angles 16:37:54 SkyScan query 16:37:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:37:55 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:37:55 Message to Master queued w/err=0: serial=14738 error=0 16:38:00 Received message from Master: op=Filter serial=14739 16:38:00 Color wheel filter change from 0 to 0 16:38:00 FLIGetFilterPos err=0 currentPosition=0 16:38:00 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:00 Filter is already there-color wheel unchanged 16:38:00 Received message from Master: op=Shutter serial=14740 16:38:00 Shutter LASER open 16:38:00 Received message from Camera: op=State serial=14742 16:38:00 GetSingleValue result=40 Value=cccccccc 16:38:00 SkyScan query 16:38:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:38:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:01 Parameters OK 16:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:01 Set A/D data flow result=40 16:38:01 Set A/D channel type result=40 16:38:01 Set A/D encoding result=40 16:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:01 Set channel filter=0.000000e+000 result=40 16:38:01 Config A/D Result=40 16:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:01 Get A/D filter: -9.255963e+061 result=40 16:38:01 Get A/D value=-858993460 result=40 16:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:01 Parameters OK 16:38:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:01 Set A/D data flow result=40 16:38:01 Set A/D channel type result=40 16:38:01 Set A/D encoding result=40 16:38:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:01 Set channel filter=0.000000e+000 result=40 16:38:01 Config A/D Result=40 16:38:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:01 Get A/D filter: -9.255963e+061 result=40 16:38:01 Get A/D value=-858993460 result=40 16:38:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:01 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:01 Aux= 16:38:01 Message to Camera, serial 14742 queued 16:38:03 Received message from Master: op=Shutter serial=14746 16:38:03 Shutter LASER close 16:38:04 Received message from Master: op=PointingHead serial=14750 16:38:04 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:38:04 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:38:04 Point started: ret=0 16:38:04 point_skyscan result=0 16:38:05 Check angles 16:38:05 SkyScan query 16:38:06 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.535<-21569 Statuses=0009 0009 16:38:06 Msec=0 True Az=135.72 Ze=-143.535 Az status=0009 Ze status=0009 16:38:06 Check angles 16:38:06 SkyScan query 16:38:06 SkyScan query done: ret=0 az=153.21<-10214 ze=-122.565<-20171 Statuses=0009 0009 16:38:06 Msec=750 True Az=153.21 Ze=-122.565 Az status=0009 Ze status=0009 16:38:06 Check angles 16:38:06 SkyScan query 16:38:07 SkyScan query done: ret=0 az=170.7<-11380 ze=-101.64<-18776 Statuses=0009 0009 16:38:07 Msec=1500 True Az=170.7 Ze=-101.64 Az status=0009 Ze status=0009 16:38:07 Check angles 16:38:07 SkyScan query 16:38:08 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.625<-17375 Statuses=0008 0009 16:38:08 Msec=2250 True Az=176.025 Ze=-80.625 Az status=0008 Ze status=0009 16:38:08 Check angles 16:38:08 SkyScan query 16:38:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.7<-15980 Statuses=0008 0009 16:38:09 Msec=3000 True Az=175.995 Ze=-59.7 Az status=0008 Ze status=0009 16:38:09 Check angles 16:38:09 SkyScan query 16:38:09 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 16:38:09 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 16:38:09 Message to Master queued w/err=0: serial=14750 error=0 16:38:14 Received message from Master: op=Filter serial=14751 16:38:14 Color wheel filter change from 0 to 0 16:38:14 FLIGetFilterPos err=0 currentPosition=0 16:38:14 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:14 Filter is already there-color wheel unchanged 16:38:14 Received message from Master: op=Shutter serial=14752 16:38:14 Shutter LASER close 16:38:15 Received message from Camera: op=State serial=14754 16:38:15 GetSingleValue result=40 Value=cccccccc 16:38:15 SkyScan query 16:38:15 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:38:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:15 Parameters OK 16:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:15 Set A/D data flow result=40 16:38:15 Set A/D channel type result=40 16:38:15 Set A/D encoding result=40 16:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:15 Set channel filter=0.000000e+000 result=40 16:38:15 Config A/D Result=40 16:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:15 Get A/D filter: -9.255963e+061 result=40 16:38:15 Get A/D value=-858993460 result=40 16:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:15 Parameters OK 16:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:15 Set A/D data flow result=40 16:38:15 Set A/D channel type result=40 16:38:15 Set A/D encoding result=40 16:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:15 Set channel filter=0.000000e+000 result=40 16:38:15 Config A/D Result=40 16:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:15 Get A/D filter: -9.255963e+061 result=40 16:38:15 Get A/D value=-858993460 result=40 16:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:15 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:15 Aux= 16:38:15 Message to Camera, serial 14754 queued 16:38:46 Received message from Master: op=PointingHead serial=14761 16:38:46 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:38:46 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:38:46 Point started: ret=0 16:38:46 point_skyscan result=0 16:38:47 Check angles 16:38:47 SkyScan query 16:38:48 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.035<-13469 Statuses=0009 0009 16:38:48 Msec=0 True Az=153.225 Ze=-22.035 Az status=0009 Ze status=0009 16:38:48 Check angles 16:38:48 SkyScan query 16:38:48 SkyScan query done: ret=0 az=135.855<-9057 ze=-1.08<-12072 Statuses=0009 0009 16:38:48 Msec=750 True Az=135.855 Ze=-1.08 Az status=0009 Ze status=0009 16:38:49 Check angles 16:38:49 SkyScan query 16:38:49 SkyScan query done: ret=0 az=118.275<-7885 ze=19.905<-10673 Statuses=0009 0009 16:38:49 Msec=1500 True Az=118.275 Ze=19.905 Az status=0009 Ze status=0009 16:38:49 Check angles 16:38:49 SkyScan query 16:38:50 SkyScan query done: ret=0 az=100.53<-6702 ze=41.25<-9250 Statuses=0009 0009 16:38:50 Msec=2250 True Az=100.53 Ze=41.25 Az status=0009 Ze status=0009 16:38:50 Check angles 16:38:50 SkyScan query 16:38:51 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 16:38:51 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 16:38:51 Check angles 16:38:51 SkyScan query 16:38:51 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:38:51 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:38:51 Message to Master queued w/err=0: serial=14761 error=0 16:38:56 Received message from Master: op=Filter serial=14762 16:38:56 Color wheel filter change from 0 to 0 16:38:56 FLIGetFilterPos err=0 currentPosition=0 16:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:38:56 Filter is already there-color wheel unchanged 16:38:57 Received message from Master: op=Shutter serial=14763 16:38:57 Shutter LASER close 16:38:57 Received message from Camera: op=State serial=14765 16:38:57 GetSingleValue result=40 Value=cccccccc 16:38:57 SkyScan query 16:38:57 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:57 Parameters OK 16:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:57 Set A/D data flow result=40 16:38:57 Set A/D channel type result=40 16:38:57 Set A/D encoding result=40 16:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:57 Set channel filter=0.000000e+000 result=40 16:38:57 Config A/D Result=40 16:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:57 Get A/D filter: -9.255963e+061 result=40 16:38:57 Get A/D value=-858993460 result=40 16:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:38:57 Parameters OK 16:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:38:57 Set A/D data flow result=40 16:38:57 Set A/D channel type result=40 16:38:57 Set A/D encoding result=40 16:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:38:57 Set channel filter=0.000000e+000 result=40 16:38:57 Config A/D Result=40 16:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:38:57 Get A/D filter: -9.255963e+061 result=40 16:38:57 Get A/D value=-858993460 result=40 16:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:38:57 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:38:57 Aux= 16:38:57 Message to Camera, serial 14765 queued 16:39:28 Received message from Master: op=PointingHead serial=14772 16:39:28 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:39:28 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:39:28 Point started: ret=0 16:39:28 point_skyscan result=0 16:39:29 Check angles 16:39:29 SkyScan query 16:39:30 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 16:39:30 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 16:39:30 Check angles 16:39:30 SkyScan query 16:39:31 SkyScan query done: ret=0 az=126.435<-8429 ze=38.505<-9433 Statuses=0009 0008 16:39:31 Msec=750 True Az=126.435 Ze=38.505 Az status=0009 Ze status=0008 16:39:31 Check angles 16:39:31 SkyScan query 16:39:31 SkyScan query done: ret=0 az=143.925<-9595 ze=38.505<-9433 Statuses=0009 0008 16:39:31 Msec=1500 True Az=143.925 Ze=38.505 Az status=0009 Ze status=0008 16:39:31 Check angles 16:39:31 SkyScan query 16:39:32 SkyScan query done: ret=0 az=161.295<-10753 ze=38.505<-9433 Statuses=0009 0008 16:39:32 Msec=2250 True Az=161.295 Ze=38.505 Az status=0009 Ze status=0008 16:39:32 Check angles 16:39:32 SkyScan query 16:39:33 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 16:39:33 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 16:39:33 Check angles 16:39:33 SkyScan query 16:39:34 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:39:34 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:39:34 Message to Master queued w/err=0: serial=14772 error=0 16:39:39 Received message from Master: op=Filter serial=14773 16:39:39 Color wheel filter change from 0 to 0 16:39:39 FLIGetFilterPos err=0 currentPosition=0 16:39:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:39:39 Filter is already there-color wheel unchanged 16:39:39 Received message from Master: op=Shutter serial=14774 16:39:39 Shutter LASER close 16:39:39 Received message from Camera: op=State serial=14776 16:39:39 GetSingleValue result=40 Value=cccccccc 16:39:39 SkyScan query 16:39:39 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:39:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:39 Parameters OK 16:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:39 Set A/D data flow result=40 16:39:39 Set A/D channel type result=40 16:39:39 Set A/D encoding result=40 16:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:39 Set channel filter=0.000000e+000 result=40 16:39:39 Config A/D Result=40 16:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:39 Get A/D filter: -9.255963e+061 result=40 16:39:39 Get A/D value=-858993460 result=40 16:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:39:39 Parameters OK 16:39:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:39:39 Set A/D data flow result=40 16:39:39 Set A/D channel type result=40 16:39:39 Set A/D encoding result=40 16:39:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:39:39 Set channel filter=0.000000e+000 result=40 16:39:39 Config A/D Result=40 16:39:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:39:39 Get A/D filter: -9.255963e+061 result=40 16:39:39 Get A/D value=-858993460 result=40 16:39:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:39:39 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:39:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:39:39 Aux= 16:39:39 Message to Camera, serial 14776 queued 16:40:10 Received message from Master: op=PointingHead serial=14783 16:40:10 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:40:10 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:40:11 Point started: ret=0 16:40:11 point_skyscan result=0 16:40:11 Check angles 16:40:11 SkyScan query 16:40:12 SkyScan query done: ret=0 az=152.805<-10187 ze=8.52<-11432 Statuses=0009 0009 16:40:12 Msec=0 True Az=152.805 Ze=8.52 Az status=0009 Ze status=0009 16:40:12 Check angles 16:40:12 SkyScan query 16:40:13 SkyScan query done: ret=0 az=135.24<-9016 ze=-12.87<-12858 Statuses=0009 0009 16:40:13 Msec=750 True Az=135.24 Ze=-12.87 Az status=0009 Ze status=0009 16:40:13 Check angles 16:40:13 SkyScan query 16:40:13 SkyScan query done: ret=0 az=117.9<-7860 ze=-33.375<-14225 Statuses=0009 0009 16:40:13 Msec=1500 True Az=117.9 Ze=-33.375 Az status=0009 Ze status=0009 16:40:14 Check angles 16:40:14 SkyScan query 16:40:14 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 16:40:14 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 16:40:14 Check angles 16:40:14 SkyScan query 16:40:15 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 16:40:15 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 16:40:15 Check angles 16:40:15 SkyScan query 16:40:16 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:40:16 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:40:16 Message to Master queued w/err=0: serial=14783 error=0 16:40:21 Received message from Master: op=Filter serial=14784 16:40:21 Color wheel filter change from 0 to 0 16:40:21 FLIGetFilterPos err=0 currentPosition=0 16:40:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:40:21 Filter is already there-color wheel unchanged 16:40:21 Received message from Master: op=Shutter serial=14785 16:40:21 Shutter LASER close 16:40:21 Received message from Camera: op=State serial=14787 16:40:21 GetSingleValue result=40 Value=cccccccc 16:40:21 SkyScan query 16:40:21 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:40:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:21 Parameters OK 16:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:21 Set A/D data flow result=40 16:40:21 Set A/D channel type result=40 16:40:21 Set A/D encoding result=40 16:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:21 Set channel filter=0.000000e+000 result=40 16:40:21 Config A/D Result=40 16:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:21 Get A/D filter: -9.255963e+061 result=40 16:40:21 Get A/D value=-858993460 result=40 16:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:40:21 Parameters OK 16:40:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:40:21 Set A/D data flow result=40 16:40:21 Set A/D channel type result=40 16:40:21 Set A/D encoding result=40 16:40:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:40:21 Set channel filter=0.000000e+000 result=40 16:40:21 Config A/D Result=40 16:40:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:40:21 Get A/D filter: -9.255963e+061 result=40 16:40:21 Get A/D value=-858993460 result=40 16:40:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:40:21 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:40:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:40:21 Aux= 16:40:21 Message to Camera, serial 14787 queued 16:40:52 Received message from Master: op=PointingHead serial=14794 16:40:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:40:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:40:53 Point started: ret=0 16:40:53 point_skyscan result=0 16:40:53 Check angles 16:40:53 SkyScan query 16:40:54 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.405<-17427 Statuses=0009 0009 16:40:54 Msec=0 True Az=109.17 Ze=-81.405 Az status=0009 Ze status=0009 16:40:54 Check angles 16:40:54 SkyScan query 16:40:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.36<-18824 Statuses=0008 0009 16:40:55 Msec=750 True Az=112.995 Ze=-102.36 Az status=0008 Ze status=0009 16:40:55 Check angles 16:40:55 SkyScan query 16:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.735<-20249 Statuses=0008 0009 16:40:56 Msec=1500 True Az=112.995 Ze=-123.735 Az status=0008 Ze status=0009 16:40:56 Check angles 16:40:56 SkyScan query 16:40:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.675<-21645 Statuses=0008 0009 16:40:56 Msec=2250 True Az=112.995 Ze=-144.675 Az status=0008 Ze status=0009 16:40:56 Check angles 16:40:56 SkyScan query 16:40:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.645<-23043 Statuses=0008 0009 16:40:57 Msec=3000 True Az=112.995 Ze=-165.645 Az status=0008 Ze status=0009 16:40:57 Check angles 16:40:57 SkyScan query 16:40:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:40:58 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:40:58 Message to Master queued w/err=0: serial=14794 error=0 16:41:03 Received message from Master: op=Filter serial=14795 [UTC 2018-12-4 16:41:03] 16:41:03 Color wheel filter change from 0 to 0 16:41:03 FLIGetFilterPos err=0 currentPosition=0 16:41:03 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:03 Filter is already there-color wheel unchanged 16:41:03 Received message from Master: op=Shutter serial=14796 16:41:03 Shutter LASER open 16:41:03 Received message from Camera: op=State serial=14798 16:41:03 GetSingleValue result=40 Value=cccccccc 16:41:03 SkyScan query 16:41:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:41:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:04 Parameters OK 16:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:04 Set A/D data flow result=40 16:41:04 Set A/D channel type result=40 16:41:04 Set A/D encoding result=40 16:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:04 Set channel filter=0.000000e+000 result=40 16:41:04 Config A/D Result=40 16:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:04 Get A/D filter: -9.255963e+061 result=40 16:41:04 Get A/D value=-858993460 result=40 16:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:04 Parameters OK 16:41:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:04 Set A/D data flow result=40 16:41:04 Set A/D channel type result=40 16:41:04 Set A/D encoding result=40 16:41:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:04 Set channel filter=0.000000e+000 result=40 16:41:04 Config A/D Result=40 16:41:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:04 Get A/D filter: -9.255963e+061 result=40 16:41:04 Get A/D value=-858993460 result=40 16:41:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:04 Aux= 16:41:04 Message to Camera, serial 14798 queued 16:41:06 Received message from Master: op=Shutter serial=14802 16:41:06 Shutter LASER close 16:41:07 Received message from Master: op=PointingHead serial=14806 16:41:07 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:41:07 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:41:07 Point started: ret=0 16:41:07 point_skyscan result=0 16:41:08 Check angles 16:41:08 SkyScan query 16:41:08 SkyScan query done: ret=0 az=89.88<-5992 ze=157.29<-1514 Statuses=0009 0009 16:41:08 Msec=0 True Az=89.88 Ze=157.29 Az status=0009 Ze status=0009 16:41:08 Check angles 16:41:08 SkyScan query 16:41:09 SkyScan query done: ret=0 az=72.36<-4824 ze=136.305<-2913 Statuses=0009 0009 16:41:09 Msec=750 True Az=72.36 Ze=136.305 Az status=0009 Ze status=0009 16:41:09 Check angles 16:41:09 SkyScan query 16:41:10 SkyScan query done: ret=0 az=55.005<-3667 ze=115.365<-4309 Statuses=0009 0009 16:41:10 Msec=1500 True Az=55.005 Ze=115.365 Az status=0009 Ze status=0009 16:41:10 Check angles 16:41:10 SkyScan query 16:41:11 SkyScan query done: ret=0 az=40.875<-2725 ze=93.945<-5737 Statuses=0009 0009 16:41:11 Msec=2250 True Az=40.875 Ze=93.945 Az status=0009 Ze status=0009 16:41:11 Check angles 16:41:11 SkyScan query 16:41:11 SkyScan query done: ret=0 az=41.01<-2734 ze=73.02<-7132 Statuses=0008 0009 16:41:11 Msec=3000 True Az=41.01 Ze=73.02 Az status=0008 Ze status=0009 16:41:12 Check angles 16:41:12 SkyScan query 16:41:12 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 16:41:12 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 16:41:12 Check angles 16:41:12 SkyScan query 16:41:13 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:41:13 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:41:13 Message to Master queued w/err=0: serial=14806 error=0 16:41:18 Received message from Master: op=Filter serial=14807 16:41:18 Color wheel filter change from 0 to 0 16:41:18 FLIGetFilterPos err=0 currentPosition=0 16:41:18 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:18 Filter is already there-color wheel unchanged 16:41:18 Received message from Master: op=Shutter serial=14808 16:41:18 Shutter LASER close 16:41:18 Received message from Camera: op=State serial=14810 16:41:18 GetSingleValue result=40 Value=cccccccc 16:41:18 SkyScan query 16:41:19 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:19 Parameters OK 16:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:19 Set A/D data flow result=40 16:41:19 Set A/D channel type result=40 16:41:19 Set A/D encoding result=40 16:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:19 Set channel filter=0.000000e+000 result=40 16:41:19 Config A/D Result=40 16:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:19 Get A/D filter: -9.255963e+061 result=40 16:41:19 Get A/D value=-858993460 result=40 16:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:41:19 Parameters OK 16:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:41:19 Set A/D data flow result=40 16:41:19 Set A/D channel type result=40 16:41:19 Set A/D encoding result=40 16:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:41:19 Set channel filter=0.000000e+000 result=40 16:41:19 Config A/D Result=40 16:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:41:19 Get A/D filter: -9.255963e+061 result=40 16:41:19 Get A/D value=-858993460 result=40 16:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:41:19 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:41:19 Aux= 16:41:19 Message to Camera, serial 14810 queued 16:41:50 Received message from Master: op=PointingHead serial=14817 16:41:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:41:50 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:41:50 Point started: ret=0 16:41:50 point_skyscan result=0 16:41:51 Check angles 16:41:51 SkyScan query 16:41:51 SkyScan query done: ret=0 az=40.995<-2733 ze=21.24<-10584 Statuses=0008 0009 16:41:51 Msec=0 True Az=40.995 Ze=21.24 Az status=0008 Ze status=0009 16:41:52 Check angles 16:41:52 SkyScan query 16:41:52 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.15<-12010 Statuses=0008 0009 16:41:52 Msec=750 True Az=40.995 Ze=-0.15 Az status=0008 Ze status=0009 16:41:52 Check angles 16:41:52 SkyScan query 16:41:53 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.105<-13407 Statuses=0008 0009 16:41:53 Msec=1500 True Az=40.995 Ze=-21.105 Az status=0008 Ze status=0009 16:41:53 Check angles 16:41:53 SkyScan query 16:41:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 16:41:54 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 16:41:54 Check angles 16:41:54 SkyScan query 16:41:54 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.535<-14569 Statuses=0008 0008 16:41:54 Msec=3000 True Az=40.995 Ze=-38.535 Az status=0008 Ze status=0008 16:41:54 Message to Master queued w/err=0: serial=14817 error=0 16:41:59 Received message from Master: op=Filter serial=14818 16:41:59 Color wheel filter change from 0 to 0 16:41:59 FLIGetFilterPos err=0 currentPosition=0 16:41:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:41:59 Filter is already there-color wheel unchanged 16:42:00 Received message from Master: op=Shutter serial=14819 16:42:00 Shutter LASER close 16:42:00 Received message from Camera: op=State serial=14821 16:42:00 GetSingleValue result=40 Value=cccccccc 16:42:00 SkyScan query 16:42:00 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:42:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:00 Parameters OK 16:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:00 Set A/D data flow result=40 16:42:00 Set A/D channel type result=40 16:42:00 Set A/D encoding result=40 16:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:00 Set channel filter=0.000000e+000 result=40 16:42:00 Config A/D Result=40 16:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:00 Get A/D filter: -9.255963e+061 result=40 16:42:00 Get A/D value=-858993460 result=40 16:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:00 Parameters OK 16:42:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:00 Set A/D data flow result=40 16:42:00 Set A/D channel type result=40 16:42:00 Set A/D encoding result=40 16:42:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:00 Set channel filter=0.000000e+000 result=40 16:42:00 Config A/D Result=40 16:42:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:00 Get A/D filter: -9.255963e+061 result=40 16:42:00 Get A/D value=-858993460 result=40 16:42:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:00 Aux= 16:42:00 Message to Camera, serial 14821 queued 16:42:31 Received message from Master: op=PointingHead serial=14828 16:42:31 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:42:31 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:42:31 Point started: ret=0 16:42:31 point_skyscan result=0 16:42:32 Check angles 16:42:32 SkyScan query 16:42:33 SkyScan query done: ret=0 az=63.75<-4250 ze=-68.19<-16546 Statuses=0009 0009 16:42:33 Msec=0 True Az=63.75 Ze=-68.19 Az status=0009 Ze status=0009 16:42:33 Check angles 16:42:33 SkyScan query 16:42:33 SkyScan query done: ret=0 az=81.27<-5418 ze=-89.16<-17944 Statuses=0009 0009 16:42:33 Msec=750 True Az=81.27 Ze=-89.16 Az status=0009 Ze status=0009 16:42:34 Check angles 16:42:34 SkyScan query 16:42:34 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.535<-19369 Statuses=0009 0009 16:42:34 Msec=1500 True Az=99.285 Ze=-110.535 Az status=0009 Ze status=0009 16:42:34 Check angles 16:42:34 SkyScan query 16:42:35 SkyScan query done: ret=0 az=116.715<-7781 ze=-131.49<-20766 Statuses=0009 0009 16:42:35 Msec=2250 True Az=116.715 Ze=-131.49 Az status=0009 Ze status=0009 16:42:35 Check angles 16:42:35 SkyScan query 16:42:36 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 16:42:36 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 16:42:36 Check angles 16:42:36 SkyScan query 16:42:37 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 16:42:37 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 16:42:37 Message to Master queued w/err=0: serial=14828 error=0 16:42:42 Received message from Master: op=Filter serial=14829 16:42:42 Color wheel filter change from 0 to 0 16:42:42 FLIGetFilterPos err=0 currentPosition=0 16:42:42 FLIGetStepsRemaining err=0 RemainingSteps=0 16:42:42 Filter is already there-color wheel unchanged 16:42:42 Received message from Master: op=Shutter serial=14830 16:42:42 Shutter LASER close 16:42:42 Received message from Camera: op=State serial=14832 16:42:42 GetSingleValue result=40 Value=cccccccc 16:42:42 SkyScan query 16:42:42 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:42:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:42 Parameters OK 16:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:42 Set A/D data flow result=40 16:42:42 Set A/D channel type result=40 16:42:42 Set A/D encoding result=40 16:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:42 Set channel filter=0.000000e+000 result=40 16:42:42 Config A/D Result=40 16:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:42 Get A/D filter: -9.255963e+061 result=40 16:42:42 Get A/D value=-858993460 result=40 16:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:42:42 Parameters OK 16:42:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:42:42 Set A/D data flow result=40 16:42:42 Set A/D channel type result=40 16:42:42 Set A/D encoding result=40 16:42:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:42:42 Set channel filter=0.000000e+000 result=40 16:42:42 Config A/D Result=40 16:42:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:42:42 Get A/D filter: -9.255963e+061 result=40 16:42:42 Get A/D value=-858993460 result=40 16:42:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:42:42 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:42:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:42:42 Aux= 16:42:42 Message to Camera, serial 14832 queued 16:43:13 Received message from Master: op=PointingHead serial=14839 16:43:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:43:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:43:14 Point started: ret=0 16:43:14 point_skyscan result=0 16:43:14 Check angles 16:43:14 SkyScan query 16:43:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-171.465<-23431 Statuses=0009 0009 16:43:15 Msec=0 True Az=112.995 Ze=-171.465 Az status=0009 Ze status=0009 16:43:15 Check angles 16:43:15 SkyScan query 16:43:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:43:16 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:43:16 Message to Master queued w/err=0: serial=14839 error=0 16:43:21 Received message from Master: op=Filter serial=14840 16:43:21 Color wheel filter change from 0 to 0 16:43:21 FLIGetFilterPos err=0 currentPosition=0 16:43:21 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:21 Filter is already there-color wheel unchanged 16:43:21 Received message from Master: op=Shutter serial=14841 16:43:21 Shutter LASER open 16:43:21 Received message from Camera: op=State serial=14843 16:43:21 GetSingleValue result=40 Value=cccccccc 16:43:21 SkyScan query 16:43:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:43:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:22 Parameters OK 16:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:22 Set A/D data flow result=40 16:43:22 Set A/D channel type result=40 16:43:22 Set A/D encoding result=40 16:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:22 Set channel filter=0.000000e+000 result=40 16:43:22 Config A/D Result=40 16:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:22 Get A/D filter: -9.255963e+061 result=40 16:43:22 Get A/D value=-858993460 result=40 16:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:22 Parameters OK 16:43:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:22 Set A/D data flow result=40 16:43:22 Set A/D channel type result=40 16:43:22 Set A/D encoding result=40 16:43:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:22 Set channel filter=0.000000e+000 result=40 16:43:22 Config A/D Result=40 16:43:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:22 Get A/D filter: -9.255963e+061 result=40 16:43:22 Get A/D value=-858993460 result=40 16:43:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:22 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:22 Aux= 16:43:22 Message to Camera, serial 14843 queued 16:43:24 Received message from Master: op=Shutter serial=14847 16:43:24 Shutter LASER close 16:43:25 Received message from Master: op=PointingHead serial=14851 16:43:25 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:43:25 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:43:25 Point started: ret=0 16:43:25 point_skyscan result=0 16:43:26 Check angles 16:43:26 SkyScan query 16:43:26 SkyScan query done: ret=0 az=136.365<-9091 ze=-142.77<-21518 Statuses=0009 0009 16:43:26 Msec=0 True Az=136.365 Ze=-142.77 Az status=0009 Ze status=0009 16:43:26 Check angles 16:43:26 SkyScan query 16:43:27 SkyScan query done: ret=0 az=154.23<-10282 ze=-121.395<-20093 Statuses=0009 0009 16:43:27 Msec=750 True Az=154.23 Ze=-121.395 Az status=0009 Ze status=0009 16:43:27 Check angles 16:43:27 SkyScan query 16:43:28 SkyScan query done: ret=0 az=171.66<-11444 ze=-100.395<-18693 Statuses=0009 0009 16:43:28 Msec=1500 True Az=171.66 Ze=-100.395 Az status=0009 Ze status=0009 16:43:28 Check angles 16:43:28 SkyScan query 16:43:29 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.455<-17297 Statuses=0008 0009 16:43:29 Msec=2250 True Az=176.025 Ze=-79.455 Az status=0008 Ze status=0009 16:43:29 Check angles 16:43:29 SkyScan query 16:43:29 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.485<-15899 Statuses=0008 0009 16:43:29 Msec=3000 True Az=176.01 Ze=-58.485 Az status=0008 Ze status=0009 16:43:29 Check angles 16:43:29 SkyScan query 16:43:30 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:43:30 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:43:30 Message to Master queued w/err=0: serial=14851 error=0 16:43:35 Received message from Master: op=Filter serial=14852 16:43:35 Color wheel filter change from 0 to 0 16:43:35 FLIGetFilterPos err=0 currentPosition=0 16:43:35 FLIGetStepsRemaining err=0 RemainingSteps=0 16:43:35 Filter is already there-color wheel unchanged 16:43:35 Received message from Master: op=Shutter serial=14853 16:43:35 Shutter LASER close 16:43:35 Received message from Camera: op=State serial=14855 16:43:35 GetSingleValue result=40 Value=cccccccc 16:43:35 SkyScan query 16:43:36 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:43:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:36 Parameters OK 16:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:36 Set A/D data flow result=40 16:43:36 Set A/D channel type result=40 16:43:36 Set A/D encoding result=40 16:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:36 Set channel filter=0.000000e+000 result=40 16:43:36 Config A/D Result=40 16:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:36 Get A/D filter: -9.255963e+061 result=40 16:43:36 Get A/D value=-858993460 result=40 16:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:43:36 Parameters OK 16:43:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:43:36 Set A/D data flow result=40 16:43:36 Set A/D channel type result=40 16:43:36 Set A/D encoding result=40 16:43:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:43:36 Set channel filter=0.000000e+000 result=40 16:43:36 Config A/D Result=40 16:43:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:43:36 Get A/D filter: -9.255963e+061 result=40 16:43:36 Get A/D value=-858993460 result=40 16:43:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:43:36 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:43:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:43:36 Aux= 16:43:36 Message to Camera, serial 14855 queued 16:44:07 Received message from Master: op=PointingHead serial=14862 16:44:07 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:44:07 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:44:07 Point started: ret=0 16:44:07 point_skyscan result=0 16:44:08 Check angles 16:44:08 SkyScan query 16:44:08 SkyScan query done: ret=0 az=152.685<-10179 ze=-21.39<-13426 Statuses=0009 0009 16:44:08 Msec=0 True Az=152.685 Ze=-21.39 Az status=0009 Ze status=0009 16:44:09 Check angles 16:44:09 SkyScan query 16:44:09 SkyScan query done: ret=0 az=135.24<-9016 ze=-0.375<-12025 Statuses=0009 0009 16:44:09 Msec=750 True Az=135.24 Ze=-0.375 Az status=0009 Ze status=0009 16:44:09 Check angles 16:44:09 SkyScan query 16:44:10 SkyScan query done: ret=0 az=117.315<-7821 ze=20.97<-10602 Statuses=0009 0009 16:44:10 Msec=1500 True Az=117.315 Ze=20.97 Az status=0009 Ze status=0009 16:44:10 Check angles 16:44:10 SkyScan query 16:44:11 SkyScan query done: ret=0 az=99.9<-6660 ze=41.955<-9203 Statuses=0009 0009 16:44:11 Msec=2250 True Az=99.9 Ze=41.955 Az status=0009 Ze status=0009 16:44:11 Check angles 16:44:11 SkyScan query 16:44:11 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:44:11 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:44:12 Check angles 16:44:12 SkyScan query 16:44:12 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:44:12 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:44:12 Message to Master queued w/err=0: serial=14862 error=0 16:44:17 Received message from Master: op=Filter serial=14863 16:44:17 Color wheel filter change from 0 to 0 16:44:17 FLIGetFilterPos err=0 currentPosition=0 16:44:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:17 Filter is already there-color wheel unchanged 16:44:17 Received message from Master: op=Shutter serial=14864 16:44:17 Shutter LASER close 16:44:17 Received message from Camera: op=State serial=14866 16:44:17 GetSingleValue result=40 Value=cccccccc 16:44:17 SkyScan query 16:44:18 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:44:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:18 Parameters OK 16:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:18 Set A/D data flow result=40 16:44:18 Set A/D channel type result=40 16:44:18 Set A/D encoding result=40 16:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:18 Set channel filter=0.000000e+000 result=40 16:44:18 Config A/D Result=40 16:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:18 Get A/D filter: -9.255963e+061 result=40 16:44:18 Get A/D value=-858993460 result=40 16:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:44:18 Parameters OK 16:44:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:44:18 Set A/D data flow result=40 16:44:18 Set A/D channel type result=40 16:44:18 Set A/D encoding result=40 16:44:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:44:18 Set channel filter=0.000000e+000 result=40 16:44:18 Config A/D Result=40 16:44:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:44:18 Get A/D filter: -9.255963e+061 result=40 16:44:18 Get A/D value=-858993460 result=40 16:44:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:44:18 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:44:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:44:18 Aux= 16:44:18 Message to Camera, serial 14866 queued 16:44:49 Received message from Master: op=PointingHead serial=14873 16:44:49 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:44:49 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:44:49 Point started: ret=0 16:44:49 point_skyscan result=0 16:44:50 Check angles 16:44:50 SkyScan query 16:44:51 SkyScan query done: ret=0 az=109.245<-7283 ze=38.49<-9434 Statuses=0009 0008 16:44:51 Msec=0 True Az=109.245 Ze=38.49 Az status=0009 Ze status=0008 16:44:51 Check angles 16:44:51 SkyScan query 16:44:51 SkyScan query done: ret=0 az=126.825<-8455 ze=38.505<-9433 Statuses=0009 0008 16:44:51 Msec=750 True Az=126.825 Ze=38.505 Az status=0009 Ze status=0008 16:44:52 Check angles 16:44:52 SkyScan query 16:44:52 SkyScan query done: ret=0 az=144.615<-9641 ze=38.505<-9433 Statuses=0009 0008 16:44:52 Msec=1500 True Az=144.615 Ze=38.505 Az status=0009 Ze status=0008 16:44:52 Check angles 16:44:52 SkyScan query 16:44:53 SkyScan query done: ret=0 az=162.03<-10802 ze=38.505<-9433 Statuses=0009 0008 16:44:53 Msec=2250 True Az=162.03 Ze=38.505 Az status=0009 Ze status=0008 16:44:53 Check angles 16:44:53 SkyScan query 16:44:54 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:44:54 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:44:54 Check angles 16:44:54 SkyScan query 16:44:54 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:44:54 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:44:54 Message to Master queued w/err=0: serial=14873 error=0 16:44:59 Received message from Master: op=Filter serial=14874 16:44:59 Color wheel filter change from 0 to 0 16:44:59 FLIGetFilterPos err=0 currentPosition=0 16:44:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:44:59 Filter is already there-color wheel unchanged 16:45:00 Received message from Master: op=Shutter serial=14875 16:45:00 Shutter LASER close 16:45:00 Received message from Camera: op=State serial=14877 16:45:00 GetSingleValue result=40 Value=cccccccc 16:45:00 SkyScan query 16:45:00 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:45:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:00 Parameters OK 16:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:00 Set A/D data flow result=40 16:45:00 Set A/D channel type result=40 16:45:00 Set A/D encoding result=40 16:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:00 Set channel filter=0.000000e+000 result=40 16:45:00 Config A/D Result=40 16:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:00 Get A/D filter: -9.255963e+061 result=40 16:45:00 Get A/D value=-858993460 result=40 16:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:00 Parameters OK 16:45:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:00 Set A/D data flow result=40 16:45:00 Set A/D channel type result=40 16:45:00 Set A/D encoding result=40 16:45:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:00 Set channel filter=0.000000e+000 result=40 16:45:00 Config A/D Result=40 16:45:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:00 Get A/D filter: -9.255963e+061 result=40 16:45:00 Get A/D value=-858993460 result=40 16:45:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:00 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:00 Aux= 16:45:00 Message to Camera, serial 14877 queued 16:45:31 Received message from Master: op=PointingHead serial=14884 16:45:31 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:45:31 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:45:31 Point started: ret=0 16:45:31 point_skyscan result=0 16:45:32 Check angles 16:45:32 SkyScan query 16:45:33 SkyScan query done: ret=0 az=153.225<-10215 ze=8.94<-11404 Statuses=0009 0009 16:45:33 Msec=0 True Az=153.225 Ze=8.94 Az status=0009 Ze status=0009 16:45:33 Check angles 16:45:33 SkyScan query 16:45:33 SkyScan query done: ret=0 az=135.825<-9055 ze=-11.985<-12799 Statuses=0009 0009 16:45:33 Msec=750 True Az=135.825 Ze=-11.985 Az status=0009 Ze status=0009 16:45:34 Check angles 16:45:34 SkyScan query 16:45:34 SkyScan query done: ret=0 az=118.32<-7888 ze=-32.955<-14197 Statuses=0009 0009 16:45:34 Msec=1500 True Az=118.32 Ze=-32.955 Az status=0009 Ze status=0009 16:45:34 Check angles 16:45:34 SkyScan query 16:45:35 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 16:45:35 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 16:45:35 Check angles 16:45:35 SkyScan query 16:45:36 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 16:45:36 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 16:45:36 Check angles 16:45:36 SkyScan query 16:45:36 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:45:36 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:45:36 Message to Master queued w/err=0: serial=14884 error=0 16:45:41 Received message from Master: op=Filter serial=14885 16:45:41 Color wheel filter change from 0 to 0 16:45:41 FLIGetFilterPos err=0 currentPosition=0 16:45:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:45:41 Filter is already there-color wheel unchanged 16:45:42 Received message from Master: op=Shutter serial=14886 16:45:42 Shutter LASER close 16:45:42 Received message from Camera: op=State serial=14888 16:45:42 GetSingleValue result=40 Value=cccccccc 16:45:42 SkyScan query 16:45:42 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:45:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:42 Parameters OK 16:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:42 Set A/D data flow result=40 16:45:42 Set A/D channel type result=40 16:45:42 Set A/D encoding result=40 16:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:42 Set channel filter=0.000000e+000 result=40 16:45:42 Config A/D Result=40 16:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:42 Get A/D filter: -9.255963e+061 result=40 16:45:42 Get A/D value=-858993460 result=40 16:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:45:42 Parameters OK 16:45:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:45:42 Set A/D data flow result=40 16:45:42 Set A/D channel type result=40 16:45:42 Set A/D encoding result=40 16:45:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:45:42 Set channel filter=0.000000e+000 result=40 16:45:42 Config A/D Result=40 16:45:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:45:42 Get A/D filter: -9.255963e+061 result=40 16:45:42 Get A/D value=-858993460 result=40 16:45:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:45:42 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:45:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:45:42 Aux= 16:45:42 Message to Camera, serial 14888 queued 16:46:13 Received message from Master: op=PointingHead serial=14895 16:46:13 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:46:13 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:46:14 Point started: ret=0 16:46:14 point_skyscan result=0 16:46:14 Check angles 16:46:14 SkyScan query 16:46:15 SkyScan query done: ret=0 az=109.425<-7295 ze=-81.78<-17452 Statuses=0009 0009 16:46:15 Msec=0 True Az=109.425 Ze=-81.78 Az status=0009 Ze status=0009 16:46:15 Check angles 16:46:15 SkyScan query 16:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.75<-18850 Statuses=0008 0009 16:46:16 Msec=750 True Az=112.995 Ze=-102.75 Az status=0008 Ze status=0009 16:46:16 Check angles 16:46:16 SkyScan query 16:46:16 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.69<-20246 Statuses=0008 0009 16:46:16 Msec=1500 True Az=112.995 Ze=-123.69 Az status=0008 Ze status=0009 16:46:17 Check angles 16:46:17 SkyScan query 16:46:17 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.615<-21641 Statuses=0008 0009 16:46:17 Msec=2250 True Az=112.995 Ze=-144.615 Az status=0008 Ze status=0009 16:46:17 Check angles 16:46:17 SkyScan query 16:46:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.02<-23068 Statuses=0008 0009 16:46:18 Msec=3000 True Az=112.995 Ze=-166.02 Az status=0008 Ze status=0009 16:46:18 Check angles 16:46:18 SkyScan query 16:46:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:46:19 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:46:19 Message to Master queued w/err=0: serial=14895 error=0 16:46:24 Received message from Master: op=Filter serial=14896 16:46:24 Color wheel filter change from 0 to 0 16:46:24 FLIGetFilterPos err=0 currentPosition=0 16:46:24 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:24 Filter is already there-color wheel unchanged 16:46:24 Received message from Master: op=Shutter serial=14897 16:46:24 Shutter LASER open 16:46:24 Received message from Camera: op=State serial=14899 16:46:24 GetSingleValue result=40 Value=cccccccc 16:46:24 SkyScan query 16:46:25 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:46:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:25 Parameters OK 16:46:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:25 Set A/D data flow result=40 16:46:25 Set A/D channel type result=40 16:46:25 Set A/D encoding result=40 16:46:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:25 Set channel filter=0.000000e+000 result=40 16:46:25 Config A/D Result=40 16:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:25 Get A/D filter: -9.255963e+061 result=40 16:46:25 Get A/D value=-858993460 result=40 16:46:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:25 Parameters OK 16:46:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:25 Set A/D data flow result=40 16:46:25 Set A/D channel type result=40 16:46:25 Set A/D encoding result=40 16:46:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:25 Set channel filter=0.000000e+000 result=40 16:46:25 Config A/D Result=40 16:46:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:25 Get A/D filter: -9.255963e+061 result=40 16:46:25 Get A/D value=-858993460 result=40 16:46:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:25 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:25 Aux= 16:46:25 Message to Camera, serial 14899 queued 16:46:27 Received message from Master: op=Shutter serial=14903 16:46:27 Shutter LASER close 16:46:27 Received message from Master: op=PointingHead serial=14907 16:46:27 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:46:27 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:46:28 Point started: ret=0 16:46:28 point_skyscan result=0 16:46:29 Check angles 16:46:29 SkyScan query 16:46:29 SkyScan query done: ret=0 az=89.925<-5995 ze=157.17<-1522 Statuses=0009 0009 16:46:29 Msec=0 True Az=89.925 Ze=157.17 Az status=0009 Ze status=0009 16:46:29 Check angles 16:46:29 SkyScan query 16:46:30 SkyScan query done: ret=0 az=71.97<-4798 ze=135.78<-2948 Statuses=0009 0009 16:46:30 Msec=750 True Az=71.97 Ze=135.78 Az status=0009 Ze status=0009 16:46:30 Check angles 16:46:30 SkyScan query 16:46:31 SkyScan query done: ret=0 az=54.735<-3649 ze=114.81<-4346 Statuses=0009 0009 16:46:31 Msec=1500 True Az=54.735 Ze=114.81 Az status=0009 Ze status=0009 16:46:31 Check angles 16:46:31 SkyScan query 16:46:31 SkyScan query done: ret=0 az=40.89<-2726 ze=93.87<-5742 Statuses=0009 0009 16:46:31 Msec=2250 True Az=40.89 Ze=93.87 Az status=0009 Ze status=0009 16:46:32 Check angles 16:46:32 SkyScan query 16:46:32 SkyScan query done: ret=0 az=40.995<-2733 ze=72.465<-7169 Statuses=0008 0009 16:46:32 Msec=3000 True Az=40.995 Ze=72.465 Az status=0008 Ze status=0009 16:46:32 Check angles 16:46:32 SkyScan query 16:46:33 SkyScan query done: ret=0 az=40.995<-2733 ze=52.275<-8515 Statuses=0008 0009 16:46:33 Msec=3750 True Az=40.995 Ze=52.275 Az status=0008 Ze status=0009 16:46:33 Check angles 16:46:33 SkyScan query 16:46:34 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:46:34 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:46:34 Message to Master queued w/err=0: serial=14907 error=0 16:46:39 Received message from Master: op=Filter serial=14908 16:46:39 Color wheel filter change from 0 to 0 16:46:39 FLIGetFilterPos err=0 currentPosition=0 16:46:39 FLIGetStepsRemaining err=0 RemainingSteps=0 16:46:39 Filter is already there-color wheel unchanged 16:46:39 Received message from Master: op=Shutter serial=14909 16:46:39 Shutter LASER close 16:46:39 Received message from Camera: op=State serial=14911 16:46:39 GetSingleValue result=40 Value=cccccccc 16:46:39 SkyScan query 16:46:40 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:46:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:40 Parameters OK 16:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:40 Set A/D data flow result=40 16:46:40 Set A/D channel type result=40 16:46:40 Set A/D encoding result=40 16:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:40 Set channel filter=0.000000e+000 result=40 16:46:40 Config A/D Result=40 16:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:40 Get A/D filter: -9.255963e+061 result=40 16:46:40 Get A/D value=-858993460 result=40 16:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:46:40 Parameters OK 16:46:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:46:40 Set A/D data flow result=40 16:46:40 Set A/D channel type result=40 16:46:40 Set A/D encoding result=40 16:46:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:46:40 Set channel filter=0.000000e+000 result=40 16:46:40 Config A/D Result=40 16:46:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:46:40 Get A/D filter: -9.255963e+061 result=40 16:46:40 Get A/D value=-858993460 result=40 16:46:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:46:40 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:46:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:46:40 Aux= 16:46:40 Message to Camera, serial 14911 queued 16:47:11 Received message from Master: op=PointingHead serial=14918 16:47:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:47:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:47:11 Point started: ret=0 16:47:11 point_skyscan result=0 16:47:12 Check angles 16:47:12 SkyScan query 16:47:12 SkyScan query done: ret=0 az=40.995<-2733 ze=21.42<-10572 Statuses=0008 0009 16:47:12 Msec=0 True Az=40.995 Ze=21.42 Az status=0008 Ze status=0009 16:47:12 Check angles 16:47:12 SkyScan query 16:47:13 SkyScan query done: ret=0 az=40.995<-2733 ze=0.015<-11999 Statuses=0008 0009 16:47:13 Msec=750 True Az=40.995 Ze=0.015 Az status=0008 Ze status=0009 16:47:13 Check angles 16:47:13 SkyScan query 16:47:14 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.925<-13395 Statuses=0008 0009 16:47:14 Msec=1500 True Az=40.995 Ze=-20.925 Az status=0008 Ze status=0009 16:47:14 Check angles 16:47:14 SkyScan query 16:47:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 16:47:15 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 16:47:15 Check angles 16:47:15 SkyScan query 16:47:15 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 16:47:15 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 16:47:15 Message to Master queued w/err=0: serial=14918 error=0 16:47:20 Received message from Master: op=Filter serial=14919 16:47:20 Color wheel filter change from 0 to 0 16:47:20 FLIGetFilterPos err=0 currentPosition=0 16:47:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:47:20 Filter is already there-color wheel unchanged 16:47:20 Received message from Master: op=Shutter serial=14920 16:47:20 Shutter LASER close 16:47:20 Received message from Camera: op=State serial=14922 16:47:20 GetSingleValue result=40 Value=cccccccc 16:47:20 SkyScan query 16:47:21 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:47:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:21 Parameters OK 16:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:21 Set A/D data flow result=40 16:47:21 Set A/D channel type result=40 16:47:21 Set A/D encoding result=40 16:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:21 Set channel filter=0.000000e+000 result=40 16:47:21 Config A/D Result=40 16:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:21 Get A/D filter: -9.255963e+061 result=40 16:47:21 Get A/D value=-858993460 result=40 16:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:47:21 Parameters OK 16:47:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:47:21 Set A/D data flow result=40 16:47:21 Set A/D channel type result=40 16:47:21 Set A/D encoding result=40 16:47:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:47:21 Set channel filter=0.000000e+000 result=40 16:47:21 Config A/D Result=40 16:47:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:47:21 Get A/D filter: -9.255963e+061 result=40 16:47:21 Get A/D value=-858993460 result=40 16:47:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:47:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:47:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:47:21 Aux= 16:47:21 Message to Camera, serial 14922 queued 16:47:52 Received message from Master: op=PointingHead serial=14929 16:47:52 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:47:52 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:47:52 Point started: ret=0 16:47:52 point_skyscan result=0 16:47:53 Check angles 16:47:53 SkyScan query 16:47:54 SkyScan query done: ret=0 az=64.215<-4281 ze=-68.91<-16594 Statuses=0009 0009 16:47:54 Msec=0 True Az=64.215 Ze=-68.91 Az status=0009 Ze status=0009 16:47:54 Check angles 16:47:54 SkyScan query 16:47:54 SkyScan query done: ret=0 az=82.065<-5471 ze=-89.865<-17991 Statuses=0009 0009 16:47:54 Msec=750 True Az=82.065 Ze=-89.865 Az status=0009 Ze status=0009 16:47:55 Check angles 16:47:55 SkyScan query 16:47:55 SkyScan query done: ret=0 az=99.51<-6634 ze=-110.805<-19387 Statuses=0009 0009 16:47:55 Msec=1500 True Az=99.51 Ze=-110.805 Az status=0009 Ze status=0009 16:47:55 Check angles 16:47:55 SkyScan query 16:47:56 SkyScan query done: ret=0 az=117<-7800 ze=-131.745<-20783 Statuses=0009 0009 16:47:56 Msec=2250 True Az=117 Ze=-131.745 Az status=0009 Ze status=0009 16:47:56 Check angles 16:47:56 SkyScan query 16:47:57 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 16:47:57 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 16:47:57 Check angles 16:47:57 SkyScan query 16:47:57 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:47:57 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:47:57 Message to Master queued w/err=0: serial=14929 error=0 16:48:02 Received message from Master: op=Filter serial=14930 16:48:02 Color wheel filter change from 0 to 0 16:48:02 FLIGetFilterPos err=0 currentPosition=0 16:48:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:02 Filter is already there-color wheel unchanged 16:48:03 Received message from Master: op=Shutter serial=14931 16:48:03 Shutter LASER close 16:48:03 Received message from Camera: op=State serial=14933 16:48:03 GetSingleValue result=40 Value=cccccccc 16:48:03 SkyScan query 16:48:03 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:48:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:03 Parameters OK 16:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:03 Set A/D data flow result=40 16:48:03 Set A/D channel type result=40 16:48:03 Set A/D encoding result=40 16:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:03 Set channel filter=0.000000e+000 result=40 16:48:03 Config A/D Result=40 16:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:03 Get A/D filter: -9.255963e+061 result=40 16:48:03 Get A/D value=-858993460 result=40 16:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:03 Parameters OK 16:48:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:03 Set A/D data flow result=40 16:48:03 Set A/D channel type result=40 16:48:03 Set A/D encoding result=40 16:48:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:03 Set channel filter=0.000000e+000 result=40 16:48:03 Config A/D Result=40 16:48:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:03 Get A/D filter: -9.255963e+061 result=40 16:48:03 Get A/D value=-858993460 result=40 16:48:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:03 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:03 Aux= 16:48:03 Message to Camera, serial 14933 queued 16:48:34 Received message from Master: op=PointingHead serial=14940 16:48:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:48:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:48:34 Point started: ret=0 16:48:34 point_skyscan result=0 16:48:35 Check angles 16:48:35 SkyScan query 16:48:36 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 16:48:36 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 16:48:36 Check angles 16:48:36 SkyScan query 16:48:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:48:36 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:48:36 Message to Master queued w/err=0: serial=14940 error=0 16:48:41 Received message from Master: op=Filter serial=14941 16:48:41 Color wheel filter change from 0 to 0 16:48:41 FLIGetFilterPos err=0 currentPosition=0 16:48:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:41 Filter is already there-color wheel unchanged 16:48:42 Received message from Master: op=Shutter serial=14942 16:48:42 Shutter LASER open 16:48:42 Received message from Camera: op=State serial=14944 16:48:42 GetSingleValue result=40 Value=cccccccc 16:48:42 SkyScan query 16:48:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:48:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:42 Parameters OK 16:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:42 Set A/D data flow result=40 16:48:42 Set A/D channel type result=40 16:48:42 Set A/D encoding result=40 16:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:42 Set channel filter=0.000000e+000 result=40 16:48:42 Config A/D Result=40 16:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:42 Get A/D filter: -9.255963e+061 result=40 16:48:42 Get A/D value=-858993460 result=40 16:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:42 Parameters OK 16:48:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:42 Set A/D data flow result=40 16:48:42 Set A/D channel type result=40 16:48:42 Set A/D encoding result=40 16:48:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:42 Set channel filter=0.000000e+000 result=40 16:48:42 Config A/D Result=40 16:48:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:42 Get A/D filter: -9.255963e+061 result=40 16:48:42 Get A/D value=-858993460 result=40 16:48:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:42 Aux= 16:48:42 Message to Camera, serial 14944 queued 16:48:45 Received message from Master: op=Shutter serial=14948 16:48:45 Shutter LASER close 16:48:45 Received message from Master: op=PointingHead serial=14952 16:48:45 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:48:45 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:48:46 Point started: ret=0 16:48:46 point_skyscan result=0 16:48:47 Check angles 16:48:47 SkyScan query 16:48:47 SkyScan query done: ret=0 az=136.185<-9079 ze=-142.935<-21529 Statuses=0009 0009 16:48:47 Msec=0 True Az=136.185 Ze=-142.935 Az status=0009 Ze status=0009 16:48:47 Check angles 16:48:47 SkyScan query 16:48:48 SkyScan query done: ret=0 az=153.69<-10246 ze=-121.95<-20130 Statuses=0009 0009 16:48:48 Msec=750 True Az=153.69 Ze=-121.95 Az status=0009 Ze status=0009 16:48:48 Check angles 16:48:48 SkyScan query 16:48:49 SkyScan query done: ret=0 az=171.18<-11412 ze=-101.04<-18736 Statuses=0009 0009 16:48:49 Msec=1500 True Az=171.18 Ze=-101.04 Az status=0009 Ze status=0009 16:48:49 Check angles 16:48:49 SkyScan query 16:48:49 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.085<-17339 Statuses=0008 0009 16:48:49 Msec=2250 True Az=176.025 Ze=-80.085 Az status=0008 Ze status=0009 16:48:50 Check angles 16:48:50 SkyScan query 16:48:50 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.16<-15944 Statuses=0008 0009 16:48:50 Msec=3000 True Az=175.995 Ze=-59.16 Az status=0008 Ze status=0009 16:48:50 Check angles 16:48:50 SkyScan query 16:48:51 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:48:51 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:48:51 Message to Master queued w/err=0: serial=14952 error=0 16:48:56 Received message from Master: op=Filter serial=14953 16:48:56 Color wheel filter change from 0 to 0 16:48:56 FLIGetFilterPos err=0 currentPosition=0 16:48:56 FLIGetStepsRemaining err=0 RemainingSteps=0 16:48:56 Filter is already there-color wheel unchanged 16:48:56 Received message from Master: op=Shutter serial=14954 16:48:56 Shutter LASER close 16:48:56 Received message from Camera: op=State serial=14956 16:48:56 GetSingleValue result=40 Value=cccccccc 16:48:56 SkyScan query 16:48:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:48:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:57 Parameters OK 16:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:57 Set A/D data flow result=40 16:48:57 Set A/D channel type result=40 16:48:57 Set A/D encoding result=40 16:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:57 Set channel filter=0.000000e+000 result=40 16:48:57 Config A/D Result=40 16:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:57 Get A/D filter: -9.255963e+061 result=40 16:48:57 Get A/D value=-858993460 result=40 16:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:48:57 Parameters OK 16:48:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:48:57 Set A/D data flow result=40 16:48:57 Set A/D channel type result=40 16:48:57 Set A/D encoding result=40 [UTC 2018-12-4 16:48:57] 16:48:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:48:57 Set channel filter=0.000000e+000 result=40 16:48:57 Config A/D Result=40 16:48:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:48:57 Get A/D filter: -9.255963e+061 result=40 16:48:57 Get A/D value=-858993460 result=40 16:48:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:48:57 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:48:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:48:57 Aux= 16:48:57 Message to Camera, serial 14956 queued 16:49:28 Received message from Master: op=PointingHead serial=14963 16:49:28 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:49:28 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:49:28 Point started: ret=0 16:49:28 point_skyscan result=0 16:49:29 Check angles 16:49:29 SkyScan query 16:49:29 SkyScan query done: ret=0 az=152.595<-10173 ze=-21.27<-13418 Statuses=0009 0009 16:49:29 Msec=0 True Az=152.595 Ze=-21.27 Az status=0009 Ze status=0009 16:49:30 Check angles 16:49:30 SkyScan query 16:49:30 SkyScan query done: ret=0 az=134.655<-8977 ze=0.135<-11991 Statuses=0009 0009 16:49:30 Msec=750 True Az=134.655 Ze=0.135 Az status=0009 Ze status=0009 16:49:30 Check angles 16:49:30 SkyScan query 16:49:31 SkyScan query done: ret=0 az=117.135<-7809 ze=21.09<-10594 Statuses=0009 0009 16:49:31 Msec=1500 True Az=117.135 Ze=21.09 Az status=0009 Ze status=0009 16:49:31 Check angles 16:49:31 SkyScan query 16:49:32 SkyScan query done: ret=0 az=99.735<-6649 ze=42.09<-9194 Statuses=0009 0009 16:49:32 Msec=2250 True Az=99.735 Ze=42.09 Az status=0009 Ze status=0009 16:49:32 Check angles 16:49:32 SkyScan query 16:49:32 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:49:32 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:49:33 Check angles 16:49:33 SkyScan query 16:49:33 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:49:33 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:49:33 Message to Master queued w/err=0: serial=14963 error=0 16:49:38 Received message from Master: op=Filter serial=14964 16:49:38 Color wheel filter change from 0 to 0 16:49:38 FLIGetFilterPos err=0 currentPosition=0 16:49:38 FLIGetStepsRemaining err=0 RemainingSteps=0 16:49:38 Filter is already there-color wheel unchanged 16:49:38 Received message from Master: op=Shutter serial=14965 16:49:38 Shutter LASER close 16:49:38 Received message from Camera: op=State serial=14967 16:49:38 GetSingleValue result=40 Value=cccccccc 16:49:38 SkyScan query 16:49:39 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:49:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:39 Parameters OK 16:49:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:39 Set A/D data flow result=40 16:49:39 Set A/D channel type result=40 16:49:39 Set A/D encoding result=40 16:49:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:39 Set channel filter=0.000000e+000 result=40 16:49:39 Config A/D Result=40 16:49:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:39 Get A/D filter: -9.255963e+061 result=40 16:49:39 Get A/D value=-858993460 result=40 16:49:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:49:39 Parameters OK 16:49:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:49:39 Set A/D data flow result=40 16:49:39 Set A/D channel type result=40 16:49:39 Set A/D encoding result=40 16:49:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:49:39 Set channel filter=0.000000e+000 result=40 16:49:39 Config A/D Result=40 16:49:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:49:39 Get A/D filter: -9.255963e+061 result=40 16:49:39 Get A/D value=-858993460 result=40 16:49:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:49:39 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:49:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:49:39 Aux= 16:49:39 Message to Camera, serial 14967 queued 16:50:10 Received message from Master: op=PointingHead serial=14974 16:50:10 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:50:10 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:50:10 Point started: ret=0 16:50:10 point_skyscan result=0 16:50:11 Check angles 16:50:11 SkyScan query 16:50:11 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 16:50:11 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 16:50:12 Check angles 16:50:12 SkyScan query 16:50:12 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 16:50:12 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 16:50:12 Check angles 16:50:12 SkyScan query 16:50:13 SkyScan query done: ret=0 az=144.015<-9601 ze=38.505<-9433 Statuses=0009 0008 16:50:13 Msec=1500 True Az=144.015 Ze=38.505 Az status=0009 Ze status=0008 16:50:13 Check angles 16:50:13 SkyScan query 16:50:14 SkyScan query done: ret=0 az=161.835<-10789 ze=38.505<-9433 Statuses=0009 0008 16:50:14 Msec=2250 True Az=161.835 Ze=38.505 Az status=0009 Ze status=0008 16:50:14 Check angles 16:50:14 SkyScan query 16:50:14 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 16:50:14 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 16:50:15 Check angles 16:50:15 SkyScan query 16:50:15 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:50:15 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:50:15 Message to Master queued w/err=0: serial=14974 error=0 16:50:20 Received message from Master: op=Filter serial=14975 16:50:20 Color wheel filter change from 0 to 0 16:50:20 FLIGetFilterPos err=0 currentPosition=0 16:50:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:50:20 Filter is already there-color wheel unchanged 16:50:20 Received message from Master: op=Shutter serial=14976 16:50:20 Shutter LASER close 16:50:20 Received message from Camera: op=State serial=14978 16:50:20 GetSingleValue result=40 Value=cccccccc 16:50:20 SkyScan query 16:50:21 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:50:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:21 Parameters OK 16:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:21 Set A/D data flow result=40 16:50:21 Set A/D channel type result=40 16:50:21 Set A/D encoding result=40 16:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:21 Set channel filter=0.000000e+000 result=40 16:50:21 Config A/D Result=40 16:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:21 Get A/D filter: -9.255963e+061 result=40 16:50:21 Get A/D value=-858993460 result=40 16:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:50:21 Parameters OK 16:50:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:50:21 Set A/D data flow result=40 16:50:21 Set A/D channel type result=40 16:50:21 Set A/D encoding result=40 16:50:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:50:21 Set channel filter=0.000000e+000 result=40 16:50:21 Config A/D Result=40 16:50:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:50:21 Get A/D filter: -9.255963e+061 result=40 16:50:21 Get A/D value=-858993460 result=40 16:50:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:50:21 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:50:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:50:21 Aux= 16:50:21 Message to Camera, serial 14978 queued 16:50:52 Received message from Master: op=PointingHead serial=14985 16:50:52 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:50:52 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:50:52 Point started: ret=0 16:50:52 point_skyscan result=0 16:50:53 Check angles 16:50:53 SkyScan query 16:50:54 SkyScan query done: ret=0 az=152.595<-10173 ze=8.31<-11446 Statuses=0009 0009 16:50:54 Msec=0 True Az=152.595 Ze=8.31 Az status=0009 Ze status=0009 16:50:54 Check angles 16:50:54 SkyScan query 16:50:54 SkyScan query done: ret=0 az=135.06<-9004 ze=-12.66<-12844 Statuses=0009 0009 16:50:54 Msec=750 True Az=135.06 Ze=-12.66 Az status=0009 Ze status=0009 16:50:55 Check angles 16:50:55 SkyScan query 16:50:55 SkyScan query done: ret=0 az=117.12<-7808 ze=-34.05<-14270 Statuses=0009 0009 16:50:55 Msec=1500 True Az=117.12 Ze=-34.05 Az status=0009 Ze status=0009 16:50:55 Check angles 16:50:55 SkyScan query 16:50:56 SkyScan query done: ret=0 az=99.705<-6647 ze=-51.555<-15437 Statuses=0009 0009 16:50:56 Msec=2250 True Az=99.705 Ze=-51.555 Az status=0009 Ze status=0009 16:50:56 Check angles 16:50:56 SkyScan query 16:50:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.525<-15435 Statuses=0009 0008 16:50:57 Msec=3000 True Az=85.995 Ze=-51.525 Az status=0009 Ze status=0008 16:50:57 Check angles 16:50:57 SkyScan query 16:50:57 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:50:57 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:50:57 Message to Master queued w/err=0: serial=14985 error=0 16:51:02 Received message from Master: op=Filter serial=14986 16:51:02 Color wheel filter change from 0 to 0 16:51:02 FLIGetFilterPos err=0 currentPosition=0 16:51:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:02 Filter is already there-color wheel unchanged 16:51:03 Received message from Master: op=Shutter serial=14987 16:51:03 Shutter LASER close 16:51:03 Received message from Camera: op=State serial=14989 16:51:03 GetSingleValue result=40 Value=cccccccc 16:51:03 SkyScan query 16:51:03 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:51:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:03 Parameters OK 16:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:03 Set A/D data flow result=40 16:51:03 Set A/D channel type result=40 16:51:03 Set A/D encoding result=40 16:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:03 Set channel filter=0.000000e+000 result=40 16:51:03 Config A/D Result=40 16:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:03 Get A/D filter: -9.255963e+061 result=40 16:51:03 Get A/D value=-858993460 result=40 16:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:03 Parameters OK 16:51:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:03 Set A/D data flow result=40 16:51:03 Set A/D channel type result=40 16:51:03 Set A/D encoding result=40 16:51:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:03 Set channel filter=0.000000e+000 result=40 16:51:03 Config A/D Result=40 16:51:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:03 Get A/D filter: -9.255963e+061 result=40 16:51:03 Get A/D value=-858993460 result=40 16:51:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:03 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:03 Aux= 16:51:03 Message to Camera, serial 14989 queued 16:51:34 Received message from Master: op=PointingHead serial=14996 16:51:34 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:51:34 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:51:34 Point started: ret=0 16:51:34 point_skyscan result=0 16:51:35 Check angles 16:51:35 SkyScan query 16:51:36 SkyScan query done: ret=0 az=108.9<-7260 ze=-81.18<-17412 Statuses=0009 0009 16:51:36 Msec=0 True Az=108.9 Ze=-81.18 Az status=0009 Ze status=0009 16:51:36 Check angles 16:51:36 SkyScan query 16:51:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.54<-18836 Statuses=0008 0009 16:51:36 Msec=750 True Az=112.995 Ze=-102.54 Az status=0008 Ze status=0009 16:51:37 Check angles 16:51:37 SkyScan query 16:51:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.495<-20233 Statuses=0008 0009 16:51:37 Msec=1500 True Az=112.995 Ze=-123.495 Az status=0008 Ze status=0009 16:51:37 Check angles 16:51:37 SkyScan query 16:51:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.435<-21629 Statuses=0008 0009 16:51:38 Msec=2250 True Az=112.995 Ze=-144.435 Az status=0008 Ze status=0009 16:51:38 Check angles 16:51:38 SkyScan query 16:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.42<-23028 Statuses=0008 0009 16:51:39 Msec=3000 True Az=112.995 Ze=-165.42 Az status=0008 Ze status=0009 16:51:39 Check angles 16:51:39 SkyScan query 16:51:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:51:39 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:51:39 Message to Master queued w/err=0: serial=14996 error=0 16:51:44 Received message from Master: op=Filter serial=14997 16:51:44 Color wheel filter change from 0 to 0 16:51:44 FLIGetFilterPos err=0 currentPosition=0 16:51:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:44 Filter is already there-color wheel unchanged 16:51:45 Received message from Master: op=Shutter serial=14998 16:51:45 Shutter LASER open 16:51:45 Received message from Camera: op=State serial=15000 16:51:45 GetSingleValue result=40 Value=cccccccc 16:51:45 SkyScan query 16:51:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:51:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:45 Parameters OK 16:51:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:45 Set A/D data flow result=40 16:51:45 Set A/D channel type result=40 16:51:45 Set A/D encoding result=40 16:51:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:45 Set channel filter=0.000000e+000 result=40 16:51:45 Config A/D Result=40 16:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:45 Get A/D filter: -9.255963e+061 result=40 16:51:45 Get A/D value=-858993460 result=40 16:51:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:51:45 Parameters OK 16:51:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:51:45 Set A/D data flow result=40 16:51:45 Set A/D channel type result=40 16:51:45 Set A/D encoding result=40 16:51:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:51:45 Set channel filter=0.000000e+000 result=40 16:51:45 Config A/D Result=40 16:51:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:51:45 Get A/D filter: -9.255963e+061 result=40 16:51:45 Get A/D value=-858993460 result=40 16:51:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:51:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:51:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:51:45 Aux= 16:51:45 Message to Camera, serial 15000 queued 16:51:48 Received message from Master: op=Shutter serial=15004 16:51:48 Shutter LASER close 16:51:48 Received message from Master: op=PointingHead serial=15008 16:51:48 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:51:48 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:51:49 Point started: ret=0 16:51:49 point_skyscan result=0 16:51:49 Received message from Master: op=Identify serial=15009 16:51:49 Check angles 16:51:49 SkyScan query 16:51:50 SkyScan query done: ret=0 az=89.64<-5976 ze=156.975<-1535 Statuses=0009 0009 16:51:50 Msec=0 True Az=89.64 Ze=156.975 Az status=0009 Ze status=0009 16:51:50 Check angles 16:51:50 SkyScan query 16:51:51 SkyScan query done: ret=0 az=72.12<-4808 ze=136.005<-2933 Statuses=0009 0009 16:51:51 Msec=750 True Az=72.12 Ze=136.005 Az status=0009 Ze status=0009 16:51:51 Check angles 16:51:51 SkyScan query 16:51:51 SkyScan query done: ret=0 az=54.48<-3632 ze=114.615<-4359 Statuses=0009 0009 16:51:51 Msec=1500 True Az=54.48 Ze=114.615 Az status=0009 Ze status=0009 16:51:52 Check angles 16:51:52 SkyScan query 16:51:52 SkyScan query done: ret=0 az=40.935<-2729 ze=93.66<-5756 Statuses=0009 0009 16:51:52 Msec=2250 True Az=40.935 Ze=93.66 Az status=0009 Ze status=0009 16:51:52 Check angles 16:51:52 SkyScan query 16:51:53 SkyScan query done: ret=0 az=40.995<-2733 ze=72.69<-7154 Statuses=0008 0009 16:51:53 Msec=3000 True Az=40.995 Ze=72.69 Az status=0008 Ze status=0009 16:51:53 Check angles 16:51:53 SkyScan query 16:51:54 SkyScan query done: ret=0 az=40.995<-2733 ze=52.185<-8521 Statuses=0008 0009 16:51:54 Msec=3750 True Az=40.995 Ze=52.185 Az status=0008 Ze status=0009 16:51:54 Check angles 16:51:54 SkyScan query 16:51:54 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:51:54 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:51:54 Message to Master queued w/err=0: serial=15008 error=0 16:51:59 Received message from Master: op=Filter serial=15012 16:51:59 Color wheel filter change from 0 to 0 16:51:59 FLIGetFilterPos err=0 currentPosition=0 16:51:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:51:59 Filter is already there-color wheel unchanged 16:52:00 Received message from Master: op=Shutter serial=15013 16:52:00 Shutter LASER close 16:52:00 Received message from Camera: op=State serial=15015 16:52:00 GetSingleValue result=40 Value=cccccccc 16:52:00 SkyScan query 16:52:00 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:52:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:00 Parameters OK 16:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:00 Set A/D data flow result=40 16:52:00 Set A/D channel type result=40 16:52:00 Set A/D encoding result=40 16:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:00 Set channel filter=0.000000e+000 result=40 16:52:00 Config A/D Result=40 16:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:00 Get A/D filter: -9.255963e+061 result=40 16:52:00 Get A/D value=-858993460 result=40 16:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:00 Parameters OK 16:52:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:00 Set A/D data flow result=40 16:52:00 Set A/D channel type result=40 16:52:00 Set A/D encoding result=40 16:52:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:00 Set channel filter=0.000000e+000 result=40 16:52:00 Config A/D Result=40 16:52:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:00 Get A/D filter: -9.255963e+061 result=40 16:52:00 Get A/D value=-858993460 result=40 16:52:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:00 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:00 Aux= 16:52:00 Message to Camera, serial 15015 queued [UTC 2018-12-4 16:52:09] 16:52:31 Received message from Master: op=PointingHead serial=15022 16:52:31 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:52:31 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:52:32 Point started: ret=0 16:52:32 point_skyscan result=0 16:52:33 Check angles 16:52:33 SkyScan query 16:52:33 SkyScan query done: ret=0 az=40.995<-2733 ze=21.18<-10588 Statuses=0008 0009 16:52:33 Msec=0 True Az=40.995 Ze=21.18 Az status=0008 Ze status=0009 16:52:33 Check angles 16:52:33 SkyScan query 16:52:34 SkyScan query done: ret=0 az=40.995<-2733 ze=0.21<-11986 Statuses=0008 0009 16:52:34 Msec=750 True Az=40.995 Ze=0.21 Az status=0008 Ze status=0009 16:52:34 Check angles 16:52:34 SkyScan query 16:52:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.73<-13382 Statuses=0008 0009 16:52:35 Msec=1500 True Az=40.995 Ze=-20.73 Az status=0008 Ze status=0009 16:52:35 Check angles 16:52:35 SkyScan query 16:52:35 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 16:52:35 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 16:52:36 Check angles 16:52:36 SkyScan query 16:52:36 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 16:52:36 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 16:52:36 Message to Master queued w/err=0: serial=15022 error=0 16:52:41 Received message from Master: op=Filter serial=15023 16:52:41 Color wheel filter change from 0 to 0 16:52:41 FLIGetFilterPos err=0 currentPosition=0 16:52:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:52:41 Filter is already there-color wheel unchanged 16:52:41 Received message from Master: op=Shutter serial=15024 16:52:41 Shutter LASER close 16:52:41 Received message from Camera: op=State serial=15026 16:52:41 GetSingleValue result=40 Value=cccccccc 16:52:41 SkyScan query 16:52:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:52:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:42 Parameters OK 16:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:42 Set A/D data flow result=40 16:52:42 Set A/D channel type result=40 16:52:42 Set A/D encoding result=40 16:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:42 Set channel filter=0.000000e+000 result=40 16:52:42 Config A/D Result=40 16:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:42 Get A/D filter: -9.255963e+061 result=40 16:52:42 Get A/D value=-858993460 result=40 16:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:52:42 Parameters OK 16:52:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:52:42 Set A/D data flow result=40 16:52:42 Set A/D channel type result=40 16:52:42 Set A/D encoding result=40 16:52:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:52:42 Set channel filter=0.000000e+000 result=40 16:52:42 Config A/D Result=40 16:52:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:52:42 Get A/D filter: -9.255963e+061 result=40 16:52:42 Get A/D value=-858993460 result=40 16:52:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:52:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:52:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:52:42 Aux= 16:52:42 Message to Camera, serial 15026 queued 16:53:13 Received message from Master: op=PointingHead serial=15033 16:53:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:53:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:53:13 Point started: ret=0 16:53:13 point_skyscan result=0 16:53:14 Check angles 16:53:14 SkyScan query 16:53:14 SkyScan query done: ret=0 az=64.245<-4283 ze=-68.73<-16582 Statuses=0009 0009 16:53:14 Msec=0 True Az=64.245 Ze=-68.73 Az status=0009 Ze status=0009 16:53:15 Check angles 16:53:15 SkyScan query 16:53:15 SkyScan query done: ret=0 az=81.975<-5465 ze=-89.7<-17980 Statuses=0009 0009 16:53:15 Msec=750 True Az=81.975 Ze=-89.7 Az status=0009 Ze status=0009 16:53:15 Check angles 16:53:15 SkyScan query 16:53:16 SkyScan query done: ret=0 az=99.405<-6627 ze=-110.64<-19376 Statuses=0009 0009 16:53:16 Msec=1500 True Az=99.405 Ze=-110.64 Az status=0009 Ze status=0009 16:53:16 Check angles 16:53:16 SkyScan query 16:53:17 SkyScan query done: ret=0 az=116.835<-7789 ze=-131.565<-20771 Statuses=0009 0009 16:53:17 Msec=2250 True Az=116.835 Ze=-131.565 Az status=0009 Ze status=0009 16:53:17 Check angles 16:53:17 SkyScan query 16:53:17 SkyScan query done: ret=0 az=131.115<-8741 ze=-141.54<-21436 Statuses=0009 0008 16:53:17 Msec=3000 True Az=131.115 Ze=-141.54 Az status=0009 Ze status=0008 16:53:18 Check angles 16:53:18 SkyScan query 16:53:18 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:53:18 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:53:18 Message to Master queued w/err=0: serial=15033 error=0 16:53:23 Received message from Master: op=Filter serial=15034 16:53:23 Color wheel filter change from 0 to 0 16:53:23 FLIGetFilterPos err=0 currentPosition=0 16:53:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:53:23 Filter is already there-color wheel unchanged 16:53:23 Received message from Master: op=Shutter serial=15035 16:53:23 Shutter LASER close 16:53:23 Received message from Camera: op=State serial=15037 16:53:23 GetSingleValue result=40 Value=cccccccc 16:53:23 SkyScan query 16:53:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:53:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:24 Parameters OK 16:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:24 Set A/D data flow result=40 16:53:24 Set A/D channel type result=40 16:53:24 Set A/D encoding result=40 16:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:24 Set channel filter=0.000000e+000 result=40 16:53:24 Config A/D Result=40 16:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:24 Get A/D filter: -9.255963e+061 result=40 16:53:24 Get A/D value=-858993460 result=40 16:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:53:24 Parameters OK 16:53:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:53:24 Set A/D data flow result=40 16:53:24 Set A/D channel type result=40 16:53:24 Set A/D encoding result=40 16:53:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:53:24 Set channel filter=0.000000e+000 result=40 16:53:24 Config A/D Result=40 16:53:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:53:24 Get A/D filter: -9.255963e+061 result=40 16:53:24 Get A/D value=-858993460 result=40 16:53:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:53:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:53:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:53:24 Aux= 16:53:24 Message to Camera, serial 15037 queued 16:53:55 Received message from Master: op=PointingHead serial=15044 16:53:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:53:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:53:55 Point started: ret=0 16:53:55 point_skyscan result=0 16:53:56 Check angles 16:53:56 SkyScan query 16:53:56 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.06<-23404 Statuses=0009 0009 16:53:56 Msec=0 True Az=113.01 Ze=-171.06 Az status=0009 Ze status=0009 16:53:57 Check angles 16:53:57 SkyScan query 16:53:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:53:57 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:53:57 Message to Master queued w/err=0: serial=15044 error=0 16:54:02 Received message from Master: op=Filter serial=15045 16:54:02 Color wheel filter change from 0 to 0 16:54:02 FLIGetFilterPos err=0 currentPosition=0 16:54:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:02 Filter is already there-color wheel unchanged 16:54:02 Received message from Master: op=Shutter serial=15046 16:54:02 Shutter LASER open 16:54:03 Received message from Camera: op=State serial=15048 16:54:03 GetSingleValue result=40 Value=cccccccc 16:54:03 SkyScan query 16:54:03 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:54:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:03 Parameters OK 16:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:03 Set A/D data flow result=40 16:54:03 Set A/D channel type result=40 16:54:03 Set A/D encoding result=40 16:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:03 Set channel filter=0.000000e+000 result=40 16:54:03 Config A/D Result=40 16:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:03 Get A/D filter: -9.255963e+061 result=40 16:54:03 Get A/D value=-858993460 result=40 16:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:03 Parameters OK 16:54:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:03 Set A/D data flow result=40 16:54:03 Set A/D channel type result=40 16:54:03 Set A/D encoding result=40 16:54:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:03 Set channel filter=0.000000e+000 result=40 16:54:03 Config A/D Result=40 16:54:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:03 Get A/D filter: -9.255963e+061 result=40 16:54:03 Get A/D value=-858993460 result=40 16:54:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:03 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:03 Aux= 16:54:03 Message to Camera, serial 15048 queued 16:54:06 Received message from Master: op=Shutter serial=15052 16:54:06 Shutter LASER close 16:54:06 Received message from Master: op=PointingHead serial=15056 16:54:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:54:06 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:54:07 Point started: ret=0 16:54:07 point_skyscan result=0 16:54:07 Check angles 16:54:07 SkyScan query 16:54:08 SkyScan query done: ret=0 az=135.72<-9048 ze=-143.505<-21567 Statuses=0009 0009 16:54:08 Msec=0 True Az=135.72 Ze=-143.505 Az status=0009 Ze status=0009 16:54:08 Check angles 16:54:08 SkyScan query 16:54:09 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.1<-20140 Statuses=0009 0009 16:54:09 Msec=750 True Az=153.585 Ze=-122.1 Az status=0009 Ze status=0009 16:54:09 Check angles 16:54:09 SkyScan query 16:54:09 SkyScan query done: ret=0 az=171.045<-11403 ze=-101.205<-18747 Statuses=0009 0009 16:54:09 Msec=1500 True Az=171.045 Ze=-101.205 Az status=0009 Ze status=0009 16:54:10 Check angles 16:54:10 SkyScan query 16:54:10 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.22<-17348 Statuses=0008 0009 16:54:10 Msec=2250 True Az=176.025 Ze=-80.22 Az status=0008 Ze status=0009 16:54:10 Check angles 16:54:10 SkyScan query 16:54:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.265<-15951 Statuses=0008 0009 16:54:11 Msec=3000 True Az=175.995 Ze=-59.265 Az status=0008 Ze status=0009 16:54:11 Check angles 16:54:11 SkyScan query 16:54:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:54:12 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:54:12 Message to Master queued w/err=0: serial=15056 error=0 16:54:17 Received message from Master: op=Filter serial=15057 16:54:17 Color wheel filter change from 0 to 0 16:54:17 FLIGetFilterPos err=0 currentPosition=0 16:54:17 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:17 Filter is already there-color wheel unchanged 16:54:17 Received message from Master: op=Shutter serial=15058 16:54:17 Shutter LASER close 16:54:17 Received message from Camera: op=State serial=15060 16:54:17 GetSingleValue result=40 Value=cccccccc 16:54:17 SkyScan query 16:54:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:54:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:18 Parameters OK 16:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:18 Set A/D data flow result=40 16:54:18 Set A/D channel type result=40 16:54:18 Set A/D encoding result=40 16:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:18 Set channel filter=0.000000e+000 result=40 16:54:18 Config A/D Result=40 16:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:18 Get A/D filter: -9.255963e+061 result=40 16:54:18 Get A/D value=-858993460 result=40 16:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:54:18 Parameters OK 16:54:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:54:18 Set A/D data flow result=40 16:54:18 Set A/D channel type result=40 16:54:18 Set A/D encoding result=40 16:54:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:54:18 Set channel filter=0.000000e+000 result=40 16:54:18 Config A/D Result=40 16:54:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:54:18 Get A/D filter: -9.255963e+061 result=40 16:54:18 Get A/D value=-858993460 result=40 16:54:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:54:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:54:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:54:18 Aux= 16:54:18 Message to Camera, serial 15060 queued 16:54:48 Received message from Master: op=PointingHead serial=15067 16:54:48 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 16:54:48 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 16:54:49 Point started: ret=0 16:54:49 point_skyscan result=0 16:54:49 Check angles 16:54:49 SkyScan query 16:54:50 SkyScan query done: ret=0 az=152.955<-10197 ze=-21.735<-13449 Statuses=0009 0009 16:54:50 Msec=0 True Az=152.955 Ze=-21.735 Az status=0009 Ze status=0009 16:54:50 Check angles 16:54:50 SkyScan query 16:54:51 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.75<-12050 Statuses=0009 0009 16:54:51 Msec=750 True Az=135.435 Ze=-0.75 Az status=0009 Ze status=0009 16:54:51 Check angles 16:54:51 SkyScan query 16:54:52 SkyScan query done: ret=0 az=117.99<-7866 ze=20.22<-10652 Statuses=0009 0009 16:54:52 Msec=1500 True Az=117.99 Ze=20.22 Az status=0009 Ze status=0009 16:54:52 Check angles 16:54:52 SkyScan query 16:54:52 SkyScan query done: ret=0 az=100.575<-6705 ze=41.16<-9256 Statuses=0009 0009 16:54:52 Msec=2250 True Az=100.575 Ze=41.16 Az status=0009 Ze status=0009 16:54:53 Check angles 16:54:53 SkyScan query 16:54:53 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 16:54:53 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 16:54:53 Check angles 16:54:53 SkyScan query 16:54:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 16:54:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 16:54:54 Message to Master queued w/err=0: serial=15067 error=0 16:54:59 Received message from Master: op=Filter serial=15068 16:54:59 Color wheel filter change from 0 to 0 16:54:59 FLIGetFilterPos err=0 currentPosition=0 16:54:59 FLIGetStepsRemaining err=0 RemainingSteps=0 16:54:59 Filter is already there-color wheel unchanged 16:54:59 Received message from Master: op=Shutter serial=15069 16:54:59 Shutter LASER close 16:54:59 Received message from Camera: op=State serial=15071 16:54:59 GetSingleValue result=40 Value=cccccccc 16:54:59 SkyScan query 16:55:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 16:55:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:00 Parameters OK 16:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:00 Set A/D data flow result=40 16:55:00 Set A/D channel type result=40 16:55:00 Set A/D encoding result=40 16:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:00 Set channel filter=0.000000e+000 result=40 16:55:00 Config A/D Result=40 16:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:00 Get A/D filter: -9.255963e+061 result=40 16:55:00 Get A/D value=-858993460 result=40 16:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:00 Parameters OK 16:55:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:00 Set A/D data flow result=40 16:55:00 Set A/D channel type result=40 16:55:00 Set A/D encoding result=40 16:55:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:00 Set channel filter=0.000000e+000 result=40 16:55:00 Config A/D Result=40 16:55:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:00 Get A/D filter: -9.255963e+061 result=40 16:55:00 Get A/D value=-858993460 result=40 16:55:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:00 Aux= 16:55:00 Message to Camera, serial 15071 queued 16:55:31 Received message from Master: op=PointingHead serial=15078 16:55:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 16:55:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 16:55:31 Point started: ret=0 16:55:31 point_skyscan result=0 16:55:32 Check angles 16:55:32 SkyScan query 16:55:32 SkyScan query done: ret=0 az=108.96<-7264 ze=38.49<-9434 Statuses=0009 0008 16:55:32 Msec=0 True Az=108.96 Ze=38.49 Az status=0009 Ze status=0008 16:55:32 Check angles 16:55:32 SkyScan query 16:55:33 SkyScan query done: ret=0 az=126.78<-8452 ze=38.49<-9434 Statuses=0009 0008 16:55:33 Msec=750 True Az=126.78 Ze=38.49 Az status=0009 Ze status=0008 16:55:33 Check angles 16:55:33 SkyScan query 16:55:34 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 16:55:34 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 16:55:34 Check angles 16:55:34 SkyScan query 16:55:35 SkyScan query done: ret=0 az=161.73<-10782 ze=38.505<-9433 Statuses=0009 0008 16:55:35 Msec=2250 True Az=161.73 Ze=38.505 Az status=0009 Ze status=0008 16:55:35 Check angles 16:55:35 SkyScan query 16:55:35 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 16:55:35 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 16:55:35 Check angles 16:55:35 SkyScan query 16:55:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 16:55:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 16:55:36 Message to Master queued w/err=0: serial=15078 error=0 16:55:41 Received message from Master: op=Filter serial=15079 16:55:41 Color wheel filter change from 0 to 0 16:55:41 FLIGetFilterPos err=0 currentPosition=0 16:55:41 FLIGetStepsRemaining err=0 RemainingSteps=0 16:55:41 Filter is already there-color wheel unchanged 16:55:41 Received message from Master: op=Shutter serial=15080 16:55:41 Shutter LASER close 16:55:41 Received message from Camera: op=State serial=15082 16:55:41 GetSingleValue result=40 Value=cccccccc 16:55:41 SkyScan query 16:55:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 16:55:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:42 Parameters OK 16:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:42 Set A/D data flow result=40 16:55:42 Set A/D channel type result=40 16:55:42 Set A/D encoding result=40 16:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:42 Set channel filter=0.000000e+000 result=40 16:55:42 Config A/D Result=40 16:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:42 Get A/D filter: -9.255963e+061 result=40 16:55:42 Get A/D value=-858993460 result=40 16:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:55:42 Parameters OK 16:55:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:55:42 Set A/D data flow result=40 16:55:42 Set A/D channel type result=40 16:55:42 Set A/D encoding result=40 16:55:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:55:42 Set channel filter=0.000000e+000 result=40 16:55:42 Config A/D Result=40 16:55:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:55:42 Get A/D filter: -9.255963e+061 result=40 16:55:42 Get A/D value=-858993460 result=40 16:55:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:55:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:55:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:55:42 Aux= 16:55:42 Message to Camera, serial 15082 queued 16:56:13 Received message from Master: op=PointingHead serial=15089 16:56:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 16:56:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 16:56:13 Point started: ret=0 16:56:13 point_skyscan result=0 16:56:14 Check angles 16:56:14 SkyScan query 16:56:14 SkyScan query done: ret=0 az=153.225<-10215 ze=8.955<-11403 Statuses=0009 0009 16:56:14 Msec=0 True Az=153.225 Ze=8.955 Az status=0009 Ze status=0009 16:56:14 Check angles 16:56:14 SkyScan query 16:56:15 SkyScan query done: ret=0 az=135.825<-9055 ze=-11.955<-12797 Statuses=0009 0009 16:56:15 Msec=750 True Az=135.825 Ze=-11.955 Az status=0009 Ze status=0009 16:56:15 Check angles 16:56:15 SkyScan query 16:56:16 SkyScan query done: ret=0 az=118.26<-7884 ze=-32.94<-14196 Statuses=0009 0009 16:56:16 Msec=1500 True Az=118.26 Ze=-32.94 Az status=0009 Ze status=0009 16:56:16 Check angles 16:56:16 SkyScan query 16:56:17 SkyScan query done: ret=0 az=100.875<-6725 ze=-51.495<-15433 Statuses=0009 0009 16:56:17 Msec=2250 True Az=100.875 Ze=-51.495 Az status=0009 Ze status=0009 16:56:17 Check angles 16:56:17 SkyScan query 16:56:17 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 16:56:17 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 16:56:17 Check angles 16:56:17 SkyScan query 16:56:18 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:56:18 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 16:56:18 Message to Master queued w/err=0: serial=15089 error=0 16:56:23 Received message from Master: op=Filter serial=15090 16:56:23 Color wheel filter change from 0 to 0 16:56:23 FLIGetFilterPos err=0 currentPosition=0 16:56:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:56:23 Filter is already there-color wheel unchanged 16:56:23 Received message from Master: op=Shutter serial=15091 16:56:23 Shutter LASER close 16:56:23 Received message from Camera: op=State serial=15093 16:56:23 GetSingleValue result=40 Value=cccccccc 16:56:23 SkyScan query 16:56:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 16:56:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:24 Parameters OK 16:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:24 Set A/D data flow result=40 16:56:24 Set A/D channel type result=40 16:56:24 Set A/D encoding result=40 16:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:24 Set channel filter=0.000000e+000 result=40 16:56:24 Config A/D Result=40 16:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:24 Get A/D filter: -9.255963e+061 result=40 16:56:24 Get A/D value=-858993460 result=40 16:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:56:24 Parameters OK 16:56:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:56:24 Set A/D data flow result=40 16:56:24 Set A/D channel type result=40 16:56:24 Set A/D encoding result=40 16:56:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:56:24 Set channel filter=0.000000e+000 result=40 16:56:24 Config A/D Result=40 16:56:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:56:24 Get A/D filter: -9.255963e+061 result=40 16:56:24 Get A/D value=-858993460 result=40 16:56:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:56:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:56:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:56:24 Aux= 16:56:24 Message to Camera, serial 15093 queued 16:56:55 Received message from Master: op=PointingHead serial=15100 16:56:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:56:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:56:55 Point started: ret=0 16:56:55 point_skyscan result=0 16:56:56 Check angles 16:56:56 SkyScan query 16:56:56 SkyScan query done: ret=0 az=109.17<-7278 ze=-81.375<-17425 Statuses=0009 0009 16:56:56 Msec=0 True Az=109.17 Ze=-81.375 Az status=0009 Ze status=0009 16:56:57 Check angles 16:56:57 SkyScan query 16:56:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 16:56:57 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 16:56:57 Check angles 16:56:57 SkyScan query 16:56:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.72<-20248 Statuses=0008 0009 16:56:58 Msec=1500 True Az=112.995 Ze=-123.72 Az status=0008 Ze status=0009 16:56:58 Check angles 16:56:58 SkyScan query 16:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.125<-21675 Statuses=0008 0009 16:56:59 Msec=2250 True Az=112.995 Ze=-145.125 Az status=0008 Ze status=0009 16:56:59 Check angles 16:56:59 SkyScan query 16:56:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.065<-23071 Statuses=0008 0009 16:56:59 Msec=3000 True Az=112.995 Ze=-166.065 Az status=0008 Ze status=0009 16:57:00 Check angles 16:57:00 SkyScan query 16:57:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 16:57:00 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 16:57:00 Message to Master queued w/err=0: serial=15100 error=0 16:57:05 Received message from Master: op=Filter serial=15101 16:57:05 Color wheel filter change from 0 to 0 16:57:05 FLIGetFilterPos err=0 currentPosition=0 16:57:05 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:05 Filter is already there-color wheel unchanged 16:57:05 Received message from Master: op=Shutter serial=15102 16:57:05 Shutter LASER open 16:57:05 Received message from Camera: op=State serial=15104 16:57:05 GetSingleValue result=40 Value=cccccccc 16:57:05 SkyScan query 16:57:06 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:57:06 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:06 Parameters OK 16:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:06 Set A/D data flow result=40 16:57:06 Set A/D channel type result=40 16:57:06 Set A/D encoding result=40 16:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:06 Set channel filter=0.000000e+000 result=40 16:57:06 Config A/D Result=40 16:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:06 Get A/D filter: -9.255963e+061 result=40 16:57:06 Get A/D value=-858993460 result=40 16:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:06 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:06 Parameters OK 16:57:06 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:06 Set A/D data flow result=40 16:57:06 Set A/D channel type result=40 16:57:06 Set A/D encoding result=40 16:57:06 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:06 Set channel filter=0.000000e+000 result=40 16:57:06 Config A/D Result=40 16:57:06 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:06 Get A/D filter: -9.255963e+061 result=40 16:57:06 Get A/D value=-858993460 result=40 16:57:06 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:06 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:06 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:06 Aux= 16:57:06 Message to Camera, serial 15104 queued 16:57:08 Received message from Master: op=Shutter serial=15108 16:57:09 Shutter LASER close 16:57:09 Received message from Master: op=PointingHead serial=15112 16:57:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 16:57:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 16:57:09 Point started: ret=0 16:57:09 point_skyscan result=0 16:57:10 Check angles 16:57:10 SkyScan query 16:57:11 SkyScan query done: ret=0 az=89.895<-5993 ze=157.41<-1506 Statuses=0009 0009 16:57:11 Msec=0 True Az=89.895 Ze=157.41 Az status=0009 Ze status=0009 16:57:11 Check angles 16:57:11 SkyScan query 16:57:11 SkyScan query done: ret=0 az=72.375<-4825 ze=136.425<-2905 Statuses=0009 0009 16:57:11 Msec=750 True Az=72.375 Ze=136.425 Az status=0009 Ze status=0009 16:57:12 Check angles 16:57:12 SkyScan query 16:57:12 SkyScan query done: ret=0 az=54.99<-3666 ze=115.485<-4301 Statuses=0009 0009 16:57:12 Msec=1500 True Az=54.99 Ze=115.485 Az status=0009 Ze status=0009 16:57:12 Check angles 16:57:12 SkyScan query 16:57:13 SkyScan query done: ret=0 az=40.845<-2723 ze=94.515<-5699 Statuses=0009 0009 16:57:13 Msec=2250 True Az=40.845 Ze=94.515 Az status=0009 Ze status=0009 16:57:13 Check angles 16:57:13 SkyScan query 16:57:14 SkyScan query done: ret=0 az=40.995<-2733 ze=73.59<-7094 Statuses=0008 0009 16:57:14 Msec=3000 True Az=40.995 Ze=73.59 Az status=0008 Ze status=0009 16:57:14 Check angles 16:57:14 SkyScan query 16:57:14 SkyScan query done: ret=0 az=40.995<-2733 ze=52.665<-8489 Statuses=0008 0009 16:57:14 Msec=3750 True Az=40.995 Ze=52.665 Az status=0008 Ze status=0009 16:57:15 Check angles 16:57:15 SkyScan query 16:57:15 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 16:57:15 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 16:57:15 Message to Master queued w/err=0: serial=15112 error=0 16:57:20 Received message from Master: op=Filter serial=15113 16:57:20 Color wheel filter change from 0 to 0 16:57:20 FLIGetFilterPos err=0 currentPosition=0 16:57:20 FLIGetStepsRemaining err=0 RemainingSteps=0 16:57:20 Filter is already there-color wheel unchanged 16:57:20 Received message from Master: op=Shutter serial=15114 16:57:20 Shutter LASER close 16:57:20 Received message from Camera: op=State serial=15116 16:57:20 GetSingleValue result=40 Value=cccccccc 16:57:20 SkyScan query 16:57:21 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 16:57:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:21 Parameters OK 16:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:21 Set A/D data flow result=40 16:57:21 Set A/D channel type result=40 16:57:21 Set A/D encoding result=40 16:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:21 Set channel filter=0.000000e+000 result=40 16:57:21 Config A/D Result=40 16:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:21 Get A/D filter: -9.255963e+061 result=40 16:57:21 Get A/D value=-858993460 result=40 16:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:57:21 Parameters OK 16:57:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:57:21 Set A/D data flow result=40 16:57:21 Set A/D channel type result=40 16:57:21 Set A/D encoding result=40 16:57:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:57:21 Set channel filter=0.000000e+000 result=40 16:57:21 Config A/D Result=40 16:57:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:57:21 Get A/D filter: -9.255963e+061 result=40 16:57:21 Get A/D value=-858993460 result=40 16:57:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:57:21 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:57:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:57:21 Aux= 16:57:21 Message to Camera, serial 15116 queued 16:57:52 Received message from Master: op=PointingHead serial=15123 16:57:52 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 16:57:52 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 16:57:52 Point started: ret=0 16:57:52 point_skyscan result=0 16:57:53 Check angles 16:57:53 SkyScan query 16:57:54 SkyScan query done: ret=0 az=40.995<-2733 ze=21.885<-10541 Statuses=0008 0009 16:57:54 Msec=0 True Az=40.995 Ze=21.885 Az status=0008 Ze status=0009 16:57:54 Check angles 16:57:54 SkyScan query 16:57:54 SkyScan query done: ret=0 az=40.995<-2733 ze=0.435<-11971 Statuses=0008 0009 16:57:54 Msec=750 True Az=40.995 Ze=0.435 Az status=0008 Ze status=0009 16:57:55 Check angles 16:57:55 SkyScan query 16:57:55 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.505<-13367 Statuses=0008 0009 16:57:55 Msec=1500 True Az=40.995 Ze=-20.505 Az status=0008 Ze status=0009 16:57:55 Check angles 16:57:55 SkyScan query 16:57:56 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 16:57:56 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 16:57:56 Check angles 16:57:56 SkyScan query 16:57:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 16:57:57 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 16:57:57 Message to Master queued w/err=0: serial=15123 error=0 16:58:02 Received message from Master: op=Filter serial=15124 16:58:02 Color wheel filter change from 0 to 0 16:58:02 FLIGetFilterPos err=0 currentPosition=0 16:58:02 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:02 Filter is already there-color wheel unchanged 16:58:02 Received message from Master: op=Shutter serial=15125 16:58:02 Shutter LASER close 16:58:02 Received message from Camera: op=State serial=15127 16:58:02 GetSingleValue result=40 Value=cccccccc 16:58:02 SkyScan query 16:58:02 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 16:58:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:02 Parameters OK 16:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:02 Set A/D data flow result=40 16:58:02 Set A/D channel type result=40 16:58:02 Set A/D encoding result=40 16:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:02 Set channel filter=0.000000e+000 result=40 16:58:02 Config A/D Result=40 16:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:02 Get A/D filter: -9.255963e+061 result=40 16:58:02 Get A/D value=-858993460 result=40 16:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:02 Parameters OK 16:58:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:02 Set A/D data flow result=40 16:58:02 Set A/D channel type result=40 16:58:02 Set A/D encoding result=40 16:58:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:02 Set channel filter=0.000000e+000 result=40 16:58:02 Config A/D Result=40 16:58:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:02 Get A/D filter: -9.255963e+061 result=40 16:58:02 Get A/D value=-858993460 result=40 16:58:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:02 Aux= 16:58:02 Message to Camera, serial 15127 queued 16:58:33 Received message from Master: op=PointingHead serial=15134 16:58:33 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 16:58:33 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 16:58:34 Point started: ret=0 16:58:34 point_skyscan result=0 16:58:34 Check angles 16:58:34 SkyScan query 16:58:35 SkyScan query done: ret=0 az=64.05<-4270 ze=-68.535<-16569 Statuses=0009 0009 16:58:35 Msec=0 True Az=64.05 Ze=-68.535 Az status=0009 Ze status=0009 16:58:35 Check angles 16:58:35 SkyScan query 16:58:36 SkyScan query done: ret=0 az=82.095<-5473 ze=-89.94<-17996 Statuses=0009 0009 16:58:36 Msec=750 True Az=82.095 Ze=-89.94 Az status=0009 Ze status=0009 16:58:36 Check angles 16:58:36 SkyScan query 16:58:37 SkyScan query done: ret=0 az=99.585<-6639 ze=-110.895<-19393 Statuses=0009 0009 16:58:37 Msec=1500 True Az=99.585 Ze=-110.895 Az status=0009 Ze status=0009 16:58:37 Check angles 16:58:37 SkyScan query 16:58:37 SkyScan query done: ret=0 az=116.985<-7799 ze=-131.85<-20790 Statuses=0009 0009 16:58:37 Msec=2250 True Az=116.985 Ze=-131.85 Az status=0009 Ze status=0009 16:58:37 Check angles 16:58:37 SkyScan query 16:58:38 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 16:58:38 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 16:58:38 Check angles 16:58:38 SkyScan query 16:58:39 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 16:58:39 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 16:58:39 Message to Master queued w/err=0: serial=15134 error=0 16:58:44 Received message from Master: op=Filter serial=15135 16:58:44 Color wheel filter change from 0 to 0 16:58:44 FLIGetFilterPos err=0 currentPosition=0 16:58:44 FLIGetStepsRemaining err=0 RemainingSteps=0 16:58:44 Filter is already there-color wheel unchanged 16:58:44 Received message from Master: op=Shutter serial=15136 16:58:44 Shutter LASER close 16:58:44 Received message from Camera: op=State serial=15138 16:58:44 GetSingleValue result=40 Value=cccccccc 16:58:44 SkyScan query 16:58:45 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 16:58:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:45 Parameters OK 16:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:45 Set A/D data flow result=40 16:58:45 Set A/D channel type result=40 16:58:45 Set A/D encoding result=40 16:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:45 Set channel filter=0.000000e+000 result=40 16:58:45 Config A/D Result=40 16:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:45 Get A/D filter: -9.255963e+061 result=40 16:58:45 Get A/D value=-858993460 result=40 16:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:58:45 Parameters OK 16:58:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:58:45 Set A/D data flow result=40 16:58:45 Set A/D channel type result=40 16:58:45 Set A/D encoding result=40 16:58:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:58:45 Set channel filter=0.000000e+000 result=40 16:58:45 Config A/D Result=40 16:58:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:58:45 Get A/D filter: -9.255963e+061 result=40 16:58:45 Get A/D value=-858993460 result=40 16:58:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:58:45 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:58:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:58:45 Aux= 16:58:45 Message to Camera, serial 15138 queued 16:59:15 Received message from Master: op=PointingHead serial=15145 16:59:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 16:59:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 16:59:16 Point started: ret=0 16:59:16 point_skyscan result=0 16:59:17 Check angles 16:59:17 SkyScan query 16:59:17 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.165<-23411 Statuses=0009 0009 16:59:17 Msec=0 True Az=113.01 Ze=-171.165 Az status=0009 Ze status=0009 16:59:17 Check angles 16:59:17 SkyScan query 16:59:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 16:59:18 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 16:59:18 Message to Master queued w/err=0: serial=15145 error=0 16:59:23 Received message from Master: op=Filter serial=15146 16:59:23 Color wheel filter change from 0 to 0 16:59:23 FLIGetFilterPos err=0 currentPosition=0 16:59:23 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:23 Filter is already there-color wheel unchanged 16:59:23 Received message from Master: op=Shutter serial=15147 16:59:23 Shutter LASER open 16:59:23 Received message from Camera: op=State serial=15149 16:59:23 GetSingleValue result=40 Value=cccccccc 16:59:23 SkyScan query 16:59:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 16:59:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:24 Parameters OK 16:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:24 Set A/D data flow result=40 16:59:24 Set A/D channel type result=40 16:59:24 Set A/D encoding result=40 16:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:24 Set channel filter=0.000000e+000 result=40 16:59:24 Config A/D Result=40 16:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:24 Get A/D filter: -9.255963e+061 result=40 16:59:24 Get A/D value=-858993460 result=40 16:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:24 Parameters OK 16:59:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:24 Set A/D data flow result=40 16:59:24 Set A/D channel type result=40 16:59:24 Set A/D encoding result=40 16:59:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:24 Set channel filter=0.000000e+000 result=40 16:59:24 Config A/D Result=40 16:59:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:24 Get A/D filter: -9.255963e+061 result=40 16:59:24 Get A/D value=-858993460 result=40 16:59:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:24 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:24 Aux= 16:59:24 Message to Camera, serial 15149 queued 16:59:26 Received message from Master: op=Shutter serial=15153 16:59:26 Shutter LASER close 16:59:27 Received message from Master: op=PointingHead serial=15157 16:59:27 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 16:59:27 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 16:59:27 Point started: ret=0 16:59:27 point_skyscan result=0 16:59:28 Check angles 16:59:28 SkyScan query 16:59:28 SkyScan query done: ret=0 az=135.705<-9047 ze=-143.505<-21567 Statuses=0009 0009 16:59:28 Msec=0 True Az=135.705 Ze=-143.505 Az status=0009 Ze status=0009 16:59:29 Check angles 16:59:29 SkyScan query 16:59:29 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.07<-20138 Statuses=0009 0009 16:59:29 Msec=750 True Az=153.66 Ze=-122.07 Az status=0009 Ze status=0009 16:59:29 Check angles 16:59:29 SkyScan query 16:59:30 SkyScan query done: ret=0 az=171.51<-11434 ze=-100.74<-18716 Statuses=0009 0009 16:59:30 Msec=1500 True Az=171.51 Ze=-100.74 Az status=0009 Ze status=0009 16:59:30 Check angles 16:59:30 SkyScan query 16:59:31 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.785<-17319 Statuses=0008 0009 16:59:31 Msec=2250 True Az=176.01 Ze=-79.785 Az status=0008 Ze status=0009 16:59:31 Check angles 16:59:31 SkyScan query 16:59:31 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.83<-15922 Statuses=0008 0009 16:59:31 Msec=3000 True Az=175.995 Ze=-58.83 Az status=0008 Ze status=0009 16:59:32 Check angles 16:59:32 SkyScan query 16:59:32 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 16:59:32 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 16:59:32 Message to Master queued w/err=0: serial=15157 error=0 16:59:37 Received message from Master: op=Filter serial=15158 16:59:37 Color wheel filter change from 0 to 0 16:59:37 FLIGetFilterPos err=0 currentPosition=0 16:59:37 FLIGetStepsRemaining err=0 RemainingSteps=0 16:59:37 Filter is already there-color wheel unchanged 16:59:37 Received message from Master: op=Shutter serial=15159 16:59:37 Shutter LASER close 16:59:38 Received message from Camera: op=State serial=15161 16:59:38 GetSingleValue result=40 Value=cccccccc 16:59:38 SkyScan query 16:59:38 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 16:59:38 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:38 Parameters OK 16:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:38 Set A/D data flow result=40 16:59:38 Set A/D channel type result=40 16:59:38 Set A/D encoding result=40 16:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:38 Set channel filter=0.000000e+000 result=40 16:59:38 Config A/D Result=40 16:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:38 Get A/D filter: -9.255963e+061 result=40 16:59:38 Get A/D value=-858993460 result=40 16:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:38 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 16:59:38 Parameters OK 16:59:38 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 16:59:38 Set A/D data flow result=40 16:59:38 Set A/D channel type result=40 16:59:38 Set A/D encoding result=40 16:59:38 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 16:59:38 Set channel filter=0.000000e+000 result=40 16:59:38 Config A/D Result=40 16:59:38 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 16:59:38 Get A/D filter: -9.255963e+061 result=40 16:59:38 Get A/D value=-858993460 result=40 16:59:38 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 16:59:38 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 16:59:38 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 16:59:38 Aux= 16:59:38 Message to Camera, serial 15161 queued 17:00:09 Received message from Master: op=PointingHead serial=15168 17:00:09 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:00:09 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:00:09 Point started: ret=0 17:00:09 point_skyscan result=0 17:00:10 Check angles 17:00:10 SkyScan query 17:00:11 SkyScan query done: ret=0 az=153.21<-10214 ze=-21.945<-13463 Statuses=0009 0009 17:00:11 Msec=0 True Az=153.21 Ze=-21.945 Az status=0009 Ze status=0009 17:00:11 Check angles 17:00:11 SkyScan query 17:00:11 SkyScan query done: ret=0 az=135.795<-9053 ze=-0.99<-12066 Statuses=0009 0009 17:00:11 Msec=750 True Az=135.795 Ze=-0.99 Az status=0009 Ze status=0009 17:00:12 Check angles 17:00:12 SkyScan query 17:00:12 SkyScan query done: ret=0 az=118.275<-7885 ze=19.995<-10667 Statuses=0009 0009 17:00:12 Msec=1500 True Az=118.275 Ze=19.995 Az status=0009 Ze status=0009 17:00:12 Check angles 17:00:12 SkyScan query 17:00:13 SkyScan query done: ret=0 az=100.845<-6723 ze=40.92<-9272 Statuses=0009 0009 17:00:13 Msec=2250 True Az=100.845 Ze=40.92 Az status=0009 Ze status=0009 17:00:13 Check angles 17:00:13 SkyScan query 17:00:14 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 17:00:14 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 17:00:14 Check angles 17:00:14 SkyScan query 17:00:14 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:00:14 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:00:14 Message to Master queued w/err=0: serial=15168 error=0 17:00:19 Received message from Master: op=Filter serial=15169 17:00:19 Color wheel filter change from 0 to 0 17:00:19 FLIGetFilterPos err=0 currentPosition=0 17:00:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:00:19 Filter is already there-color wheel unchanged 17:00:20 Received message from Master: op=Shutter serial=15170 17:00:20 Shutter LASER close 17:00:20 Received message from Camera: op=State serial=15172 17:00:20 GetSingleValue result=40 Value=cccccccc 17:00:20 SkyScan query 17:00:20 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:00:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:20 Parameters OK 17:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:20 Set A/D data flow result=40 17:00:20 Set A/D channel type result=40 17:00:20 Set A/D encoding result=40 17:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:20 Set channel filter=0.000000e+000 result=40 17:00:20 Config A/D Result=40 17:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:20 Get A/D filter: -9.255963e+061 result=40 17:00:20 Get A/D value=-858993460 result=40 17:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:00:20 Parameters OK 17:00:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:00:20 Set A/D data flow result=40 17:00:20 Set A/D channel type result=40 17:00:20 Set A/D encoding result=40 17:00:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:00:20 Set channel filter=0.000000e+000 result=40 17:00:20 Config A/D Result=40 17:00:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:00:20 Get A/D filter: -9.255963e+061 result=40 17:00:20 Get A/D value=-858993460 result=40 17:00:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:00:20 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:00:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:00:20 Aux= 17:00:20 Message to Camera, serial 15172 queued 17:00:51 Received message from Master: op=PointingHead serial=15179 17:00:51 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:00:51 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:00:52 Point started: ret=0 17:00:52 point_skyscan result=0 17:00:52 Check angles 17:00:52 SkyScan query 17:00:53 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 17:00:53 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 17:00:53 Check angles 17:00:53 SkyScan query 17:00:54 SkyScan query done: ret=0 az=126.975<-8465 ze=38.505<-9433 Statuses=0009 0008 17:00:54 Msec=750 True Az=126.975 Ze=38.505 Az status=0009 Ze status=0008 17:00:54 Check angles 17:00:54 SkyScan query 17:00:54 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 17:00:54 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 17:00:55 Check angles 17:00:55 SkyScan query 17:00:55 SkyScan query done: ret=0 az=161.925<-10795 ze=38.505<-9433 Statuses=0009 0008 17:00:55 Msec=2250 True Az=161.925 Ze=38.505 Az status=0009 Ze status=0008 17:00:55 Check angles 17:00:55 SkyScan query 17:00:56 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:00:56 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:00:56 Check angles 17:00:56 SkyScan query 17:00:57 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:00:57 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:00:57 Message to Master queued w/err=0: serial=15179 error=0 17:01:02 Received message from Master: op=Filter serial=15180 17:01:02 Color wheel filter change from 0 to 0 17:01:02 FLIGetFilterPos err=0 currentPosition=0 17:01:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:02 Filter is already there-color wheel unchanged [UTC 2018-12-4 17:01:02] 17:01:02 Received message from Master: op=Shutter serial=15181 17:01:02 Shutter LASER close 17:01:02 Received message from Camera: op=State serial=15183 17:01:02 GetSingleValue result=40 Value=cccccccc 17:01:02 SkyScan query 17:01:03 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:01:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:03 Parameters OK 17:01:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:03 Set A/D data flow result=40 17:01:03 Set A/D channel type result=40 17:01:03 Set A/D encoding result=40 17:01:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:03 Set channel filter=0.000000e+000 result=40 17:01:03 Config A/D Result=40 17:01:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:03 Get A/D filter: -9.255963e+061 result=40 17:01:03 Get A/D value=-858993460 result=40 17:01:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:03 Parameters OK 17:01:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:03 Set A/D data flow result=40 17:01:03 Set A/D channel type result=40 17:01:03 Set A/D encoding result=40 17:01:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:03 Set channel filter=0.000000e+000 result=40 17:01:03 Config A/D Result=40 17:01:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:03 Get A/D filter: -9.255963e+061 result=40 17:01:03 Get A/D value=-858993460 result=40 17:01:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:03 Aux= 17:01:03 Message to Camera, serial 15183 queued 17:01:33 Received message from Master: op=PointingHead serial=15190 17:01:33 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:01:33 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:01:34 Point started: ret=0 17:01:34 point_skyscan result=0 17:01:34 Check angles 17:01:34 SkyScan query 17:01:35 SkyScan query done: ret=0 az=152.985<-10199 ze=8.64<-11424 Statuses=0009 0009 17:01:35 Msec=0 True Az=152.985 Ze=8.64 Az status=0009 Ze status=0009 17:01:35 Check angles 17:01:35 SkyScan query 17:01:36 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.3<-12820 Statuses=0009 0009 17:01:36 Msec=750 True Az=135.45 Ze=-12.3 Az status=0009 Ze status=0009 17:01:36 Check angles 17:01:36 SkyScan query 17:01:37 SkyScan query done: ret=0 az=118.005<-7867 ze=-33.225<-14215 Statuses=0009 0009 17:01:37 Msec=1500 True Az=118.005 Ze=-33.225 Az status=0009 Ze status=0009 17:01:37 Check angles 17:01:37 SkyScan query 17:01:37 SkyScan query done: ret=0 az=100.245<-6683 ze=-51.555<-15437 Statuses=0009 0009 17:01:37 Msec=2250 True Az=100.245 Ze=-51.555 Az status=0009 Ze status=0009 17:01:37 Check angles 17:01:37 SkyScan query 17:01:38 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:01:38 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:01:38 Check angles 17:01:38 SkyScan query 17:01:39 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:01:39 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:01:39 Message to Master queued w/err=0: serial=15190 error=0 17:01:44 Received message from Master: op=Filter serial=15191 17:01:44 Color wheel filter change from 0 to 0 17:01:44 FLIGetFilterPos err=0 currentPosition=0 17:01:44 FLIGetStepsRemaining err=0 RemainingSteps=0 17:01:44 Filter is already there-color wheel unchanged 17:01:44 Received message from Master: op=Shutter serial=15192 17:01:44 Shutter LASER close 17:01:44 Received message from Camera: op=State serial=15194 17:01:44 GetSingleValue result=40 Value=cccccccc 17:01:44 SkyScan query 17:01:45 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:01:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:45 Parameters OK 17:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:45 Set A/D data flow result=40 17:01:45 Set A/D channel type result=40 17:01:45 Set A/D encoding result=40 17:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:45 Set channel filter=0.000000e+000 result=40 17:01:45 Config A/D Result=40 17:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:45 Get A/D filter: -9.255963e+061 result=40 17:01:45 Get A/D value=-858993460 result=40 17:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:01:45 Parameters OK 17:01:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:01:45 Set A/D data flow result=40 17:01:45 Set A/D channel type result=40 17:01:45 Set A/D encoding result=40 17:01:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:01:45 Set channel filter=0.000000e+000 result=40 17:01:45 Config A/D Result=40 17:01:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:01:45 Get A/D filter: -9.255963e+061 result=40 17:01:45 Get A/D value=-858993460 result=40 17:01:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:01:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:01:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:01:45 Aux= 17:01:45 Message to Camera, serial 15194 queued 17:02:15 Received message from Master: op=PointingHead serial=15201 17:02:15 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:02:15 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:02:16 Point started: ret=0 17:02:16 point_skyscan result=0 17:02:17 Check angles 17:02:17 SkyScan query 17:02:17 SkyScan query done: ret=0 az=108.96<-7264 ze=-81.12<-17408 Statuses=0009 0009 17:02:17 Msec=0 True Az=108.96 Ze=-81.12 Az status=0009 Ze status=0009 17:02:17 Check angles 17:02:17 SkyScan query 17:02:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.495<-18833 Statuses=0008 0009 17:02:18 Msec=750 True Az=112.995 Ze=-102.495 Az status=0008 Ze status=0009 17:02:18 Check angles 17:02:18 SkyScan query 17:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.885<-20259 Statuses=0008 0009 17:02:19 Msec=1500 True Az=112.995 Ze=-123.885 Az status=0008 Ze status=0009 17:02:19 Check angles 17:02:19 SkyScan query 17:02:19 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.81<-21654 Statuses=0008 0009 17:02:19 Msec=2250 True Az=112.995 Ze=-144.81 Az status=0008 Ze status=0009 17:02:20 Check angles 17:02:20 SkyScan query 17:02:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.78<-23052 Statuses=0008 0009 17:02:20 Msec=3000 True Az=112.995 Ze=-165.78 Az status=0008 Ze status=0009 17:02:20 Check angles 17:02:20 SkyScan query 17:02:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:02:21 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:02:21 Message to Master queued w/err=0: serial=15201 error=0 17:02:26 Received message from Master: op=Filter serial=15202 17:02:26 Color wheel filter change from 0 to 0 17:02:26 FLIGetFilterPos err=0 currentPosition=0 17:02:26 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:26 Filter is already there-color wheel unchanged 17:02:26 Received message from Master: op=Shutter serial=15203 17:02:26 Shutter LASER open 17:02:26 Received message from Camera: op=State serial=15205 17:02:26 GetSingleValue result=40 Value=cccccccc 17:02:26 SkyScan query 17:02:27 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:02:27 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:27 Parameters OK 17:02:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:27 Set A/D data flow result=40 17:02:27 Set A/D channel type result=40 17:02:27 Set A/D encoding result=40 17:02:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:27 Set channel filter=0.000000e+000 result=40 17:02:27 Config A/D Result=40 17:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:27 Get A/D filter: -9.255963e+061 result=40 17:02:27 Get A/D value=-858993460 result=40 17:02:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:27 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:27 Parameters OK 17:02:27 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:27 Set A/D data flow result=40 17:02:27 Set A/D channel type result=40 17:02:27 Set A/D encoding result=40 17:02:27 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:27 Set channel filter=0.000000e+000 result=40 17:02:27 Config A/D Result=40 17:02:27 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:27 Get A/D filter: -9.255963e+061 result=40 17:02:27 Get A/D value=-858993460 result=40 17:02:27 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:27 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:27 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:27 Aux= 17:02:27 Message to Camera, serial 15205 queued 17:02:29 Received message from Master: op=Shutter serial=15209 17:02:29 Shutter LASER close 17:02:30 Received message from Master: op=PointingHead serial=15213 17:02:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:02:30 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:02:30 Point started: ret=0 17:02:30 point_skyscan result=0 17:02:31 Check angles 17:02:31 SkyScan query 17:02:31 SkyScan query done: ret=0 az=90.06<-6004 ze=157.455<-1503 Statuses=0009 0009 17:02:31 Msec=0 True Az=90.06 Ze=157.455 Az status=0009 Ze status=0009 17:02:32 Check angles 17:02:32 SkyScan query 17:02:32 SkyScan query done: ret=0 az=72.72<-4848 ze=136.545<-2897 Statuses=0009 0009 17:02:32 Msec=750 True Az=72.72 Ze=136.545 Az status=0009 Ze status=0009 17:02:32 Check angles 17:02:32 SkyScan query 17:02:33 SkyScan query done: ret=0 az=55.155<-3677 ze=115.59<-4294 Statuses=0009 0009 17:02:33 Msec=1500 True Az=55.155 Ze=115.59 Az status=0009 Ze status=0009 17:02:33 Check angles 17:02:33 SkyScan query 17:02:34 SkyScan query done: ret=0 az=40.83<-2722 ze=94.62<-5692 Statuses=0009 0009 17:02:34 Msec=2250 True Az=40.83 Ze=94.62 Az status=0009 Ze status=0009 17:02:34 Check angles 17:02:34 SkyScan query 17:02:34 SkyScan query done: ret=0 az=40.995<-2733 ze=73.245<-7117 Statuses=0008 0009 17:02:34 Msec=3000 True Az=40.995 Ze=73.245 Az status=0008 Ze status=0009 17:02:35 Check angles 17:02:35 SkyScan query 17:02:35 SkyScan query done: ret=0 az=40.995<-2733 ze=52.74<-8484 Statuses=0008 0009 17:02:35 Msec=3750 True Az=40.995 Ze=52.74 Az status=0008 Ze status=0009 17:02:35 Check angles 17:02:35 SkyScan query 17:02:36 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:02:36 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:02:36 Message to Master queued w/err=0: serial=15213 error=0 17:02:41 Received message from Master: op=Filter serial=15214 17:02:41 Color wheel filter change from 0 to 0 17:02:41 FLIGetFilterPos err=0 currentPosition=0 17:02:41 FLIGetStepsRemaining err=0 RemainingSteps=0 17:02:41 Filter is already there-color wheel unchanged 17:02:41 Received message from Master: op=Shutter serial=15215 17:02:41 Shutter LASER close 17:02:41 Received message from Camera: op=State serial=15217 17:02:41 GetSingleValue result=40 Value=cccccccc 17:02:41 SkyScan query 17:02:42 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:02:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:42 Parameters OK 17:02:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:42 Set A/D data flow result=40 17:02:42 Set A/D channel type result=40 17:02:42 Set A/D encoding result=40 17:02:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:42 Set channel filter=0.000000e+000 result=40 17:02:42 Config A/D Result=40 17:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:42 Get A/D filter: -9.255963e+061 result=40 17:02:42 Get A/D value=-858993460 result=40 17:02:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:02:42 Parameters OK 17:02:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:02:42 Set A/D data flow result=40 17:02:42 Set A/D channel type result=40 17:02:42 Set A/D encoding result=40 17:02:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:02:42 Set channel filter=0.000000e+000 result=40 17:02:42 Config A/D Result=40 17:02:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:02:42 Get A/D filter: -9.255963e+061 result=40 17:02:42 Get A/D value=-858993460 result=40 17:02:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:02:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:02:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:02:42 Aux= 17:02:42 Message to Camera, serial 15217 queued 17:03:13 Received message from Master: op=PointingHead serial=15224 17:03:13 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:03:13 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:03:13 Point started: ret=0 17:03:13 point_skyscan result=0 17:03:14 Check angles 17:03:14 SkyScan query 17:03:14 SkyScan query done: ret=0 az=40.995<-2733 ze=21.735<-10551 Statuses=0008 0009 17:03:14 Msec=0 True Az=40.995 Ze=21.735 Az status=0008 Ze status=0009 17:03:15 Check angles 17:03:15 SkyScan query 17:03:15 SkyScan query done: ret=0 az=40.995<-2733 ze=0.75<-11950 Statuses=0008 0009 17:03:15 Msec=750 True Az=40.995 Ze=0.75 Az status=0008 Ze status=0009 17:03:15 Check angles 17:03:15 SkyScan query 17:03:16 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.61<-13374 Statuses=0008 0009 17:03:16 Msec=1500 True Az=40.995 Ze=-20.61 Az status=0008 Ze status=0009 17:03:16 Check angles 17:03:16 SkyScan query 17:03:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.565<-14571 Statuses=0008 0009 17:03:17 Msec=2250 True Az=40.995 Ze=-38.565 Az status=0008 Ze status=0009 17:03:17 Check angles 17:03:17 SkyScan query 17:03:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 17:03:17 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 17:03:17 Message to Master queued w/err=0: serial=15224 error=0 17:03:22 Received message from Master: op=Filter serial=15225 17:03:22 Color wheel filter change from 0 to 0 17:03:22 FLIGetFilterPos err=0 currentPosition=0 17:03:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:03:22 Filter is already there-color wheel unchanged 17:03:23 Received message from Master: op=Shutter serial=15226 17:03:23 Shutter LASER close 17:03:23 Received message from Camera: op=State serial=15228 17:03:23 GetSingleValue result=40 Value=cccccccc 17:03:23 SkyScan query 17:03:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:03:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:23 Parameters OK 17:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:23 Set A/D data flow result=40 17:03:23 Set A/D channel type result=40 17:03:23 Set A/D encoding result=40 17:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:23 Set channel filter=0.000000e+000 result=40 17:03:23 Config A/D Result=40 17:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:23 Get A/D filter: -9.255963e+061 result=40 17:03:23 Get A/D value=-858993460 result=40 17:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:03:23 Parameters OK 17:03:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:03:23 Set A/D data flow result=40 17:03:23 Set A/D channel type result=40 17:03:23 Set A/D encoding result=40 17:03:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:03:23 Set channel filter=0.000000e+000 result=40 17:03:23 Config A/D Result=40 17:03:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:03:23 Get A/D filter: -9.255963e+061 result=40 17:03:23 Get A/D value=-858993460 result=40 17:03:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:03:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:03:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:03:23 Aux= 17:03:23 Message to Camera, serial 15228 queued 17:03:54 Received message from Master: op=PointingHead serial=15235 17:03:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:03:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:03:54 Point started: ret=0 17:03:54 point_skyscan result=0 17:03:55 Check angles 17:03:55 SkyScan query 17:03:56 SkyScan query done: ret=0 az=63.765<-4251 ze=-68.16<-16544 Statuses=0009 0009 17:03:56 Msec=0 True Az=63.765 Ze=-68.16 Az status=0009 Ze status=0009 17:03:56 Check angles 17:03:56 SkyScan query 17:03:56 SkyScan query done: ret=0 az=81.825<-5455 ze=-89.55<-17970 Statuses=0009 0009 17:03:56 Msec=750 True Az=81.825 Ze=-89.55 Az status=0009 Ze status=0009 17:03:57 Check angles 17:03:57 SkyScan query 17:03:57 SkyScan query done: ret=0 az=99.615<-6641 ze=-110.94<-19396 Statuses=0009 0009 17:03:57 Msec=1500 True Az=99.615 Ze=-110.94 Az status=0009 Ze status=0009 17:03:57 Check angles 17:03:57 SkyScan query 17:03:58 SkyScan query done: ret=0 az=117.405<-7827 ze=-132.315<-20821 Statuses=0009 0009 17:03:58 Msec=2250 True Az=117.405 Ze=-132.315 Az status=0009 Ze status=0009 17:03:58 Check angles 17:03:58 SkyScan query 17:03:59 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 17:03:59 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 17:03:59 Check angles 17:03:59 SkyScan query 17:04:00 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:04:00 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:04:00 Message to Master queued w/err=0: serial=15235 error=0 17:04:05 Received message from Master: op=Filter serial=15236 17:04:05 Color wheel filter change from 0 to 0 17:04:05 FLIGetFilterPos err=0 currentPosition=0 17:04:05 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:05 Filter is already there-color wheel unchanged 17:04:05 Received message from Master: op=Shutter serial=15237 17:04:05 Shutter LASER close 17:04:05 Received message from Camera: op=State serial=15239 17:04:05 GetSingleValue result=40 Value=cccccccc 17:04:05 SkyScan query 17:04:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:04:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:05 Parameters OK 17:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:05 Set A/D data flow result=40 17:04:05 Set A/D channel type result=40 17:04:05 Set A/D encoding result=40 17:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:05 Set channel filter=0.000000e+000 result=40 17:04:05 Config A/D Result=40 17:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:05 Get A/D filter: -9.255963e+061 result=40 17:04:05 Get A/D value=-858993460 result=40 17:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:05 Parameters OK 17:04:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:05 Set A/D data flow result=40 17:04:05 Set A/D channel type result=40 17:04:05 Set A/D encoding result=40 17:04:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:05 Set channel filter=0.000000e+000 result=40 17:04:05 Config A/D Result=40 17:04:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:05 Get A/D filter: -9.255963e+061 result=40 17:04:05 Get A/D value=-858993460 result=40 17:04:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:05 Aux= 17:04:05 Message to Camera, serial 15239 queued 17:04:36 Received message from Master: op=PointingHead serial=15246 17:04:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:04:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:04:37 Point started: ret=0 17:04:37 point_skyscan result=0 17:04:37 Check angles 17:04:37 SkyScan query 17:04:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.435<-23429 Statuses=0009 0009 17:04:38 Msec=0 True Az=113.01 Ze=-171.435 Az status=0009 Ze status=0009 17:04:38 Check angles 17:04:38 SkyScan query 17:04:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:04:39 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:04:39 Message to Master queued w/err=0: serial=15246 error=0 17:04:44 Received message from Master: op=Filter serial=15247 17:04:44 Color wheel filter change from 0 to 0 17:04:44 FLIGetFilterPos err=0 currentPosition=0 17:04:44 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:44 Filter is already there-color wheel unchanged 17:04:44 Received message from Master: op=Shutter serial=15248 17:04:44 Shutter LASER open 17:04:44 Received message from Camera: op=State serial=15250 17:04:44 GetSingleValue result=40 Value=cccccccc 17:04:44 SkyScan query 17:04:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:04:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:45 Parameters OK 17:04:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:45 Set A/D data flow result=40 17:04:45 Set A/D channel type result=40 17:04:45 Set A/D encoding result=40 17:04:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:45 Set channel filter=0.000000e+000 result=40 17:04:45 Config A/D Result=40 17:04:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:45 Get A/D filter: -9.255963e+061 result=40 17:04:45 Get A/D value=-858993460 result=40 17:04:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:45 Parameters OK 17:04:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:45 Set A/D data flow result=40 17:04:45 Set A/D channel type result=40 17:04:45 Set A/D encoding result=40 17:04:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:45 Set channel filter=0.000000e+000 result=40 17:04:45 Config A/D Result=40 17:04:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:45 Get A/D filter: -9.255963e+061 result=40 17:04:45 Get A/D value=-858993460 result=40 17:04:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:45 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:45 Aux= 17:04:45 Message to Camera, serial 15250 queued 17:04:47 Received message from Master: op=Shutter serial=15254 17:04:47 Shutter LASER close 17:04:48 Received message from Master: op=PointingHead serial=15258 17:04:48 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:04:48 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:04:48 Point started: ret=0 17:04:48 point_skyscan result=0 17:04:49 Check angles 17:04:49 SkyScan query 17:04:49 SkyScan query done: ret=0 az=136.185<-9079 ze=-143.055<-21537 Statuses=0009 0009 17:04:49 Msec=0 True Az=136.185 Ze=-143.055 Az status=0009 Ze status=0009 17:04:49 Check angles 17:04:49 SkyScan query 17:04:50 SkyScan query done: ret=0 az=153.615<-10241 ze=-122.07<-20138 Statuses=0009 0009 17:04:50 Msec=750 True Az=153.615 Ze=-122.07 Az status=0009 Ze status=0009 17:04:50 Check angles 17:04:50 SkyScan query 17:04:51 SkyScan query done: ret=0 az=171.45<-11430 ze=-100.695<-18713 Statuses=0009 0009 17:04:51 Msec=1500 True Az=171.45 Ze=-100.695 Az status=0009 Ze status=0009 17:04:51 Check angles 17:04:51 SkyScan query 17:04:52 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.785<-17319 Statuses=0008 0009 17:04:52 Msec=2250 True Az=176.025 Ze=-79.785 Az status=0008 Ze status=0009 17:04:52 Check angles 17:04:52 SkyScan query 17:04:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.815<-15921 Statuses=0008 0009 17:04:52 Msec=3000 True Az=175.995 Ze=-58.815 Az status=0008 Ze status=0009 17:04:52 Check angles 17:04:52 SkyScan query 17:04:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 17:04:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 17:04:53 Message to Master queued w/err=0: serial=15258 error=0 17:04:58 Received message from Master: op=Filter serial=15259 17:04:58 Color wheel filter change from 0 to 0 17:04:58 FLIGetFilterPos err=0 currentPosition=0 17:04:58 FLIGetStepsRemaining err=0 RemainingSteps=0 17:04:58 Filter is already there-color wheel unchanged 17:04:58 Received message from Master: op=Shutter serial=15260 17:04:58 Shutter LASER close 17:04:58 Received message from Camera: op=State serial=15262 17:04:58 GetSingleValue result=40 Value=cccccccc 17:04:58 SkyScan query 17:04:59 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:04:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:59 Parameters OK 17:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:59 Set A/D data flow result=40 17:04:59 Set A/D channel type result=40 17:04:59 Set A/D encoding result=40 17:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:59 Set channel filter=0.000000e+000 result=40 17:04:59 Config A/D Result=40 17:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:59 Get A/D filter: -9.255963e+061 result=40 17:04:59 Get A/D value=-858993460 result=40 17:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:04:59 Parameters OK 17:04:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:04:59 Set A/D data flow result=40 17:04:59 Set A/D channel type result=40 17:04:59 Set A/D encoding result=40 17:04:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:04:59 Set channel filter=0.000000e+000 result=40 17:04:59 Config A/D Result=40 17:04:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:04:59 Get A/D filter: -9.255963e+061 result=40 17:04:59 Get A/D value=-858993460 result=40 17:04:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:04:59 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:04:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:04:59 Aux= 17:04:59 Message to Camera, serial 15262 queued 17:05:30 Received message from Master: op=PointingHead serial=15269 17:05:30 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:05:30 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:05:30 Point started: ret=0 17:05:30 point_skyscan result=0 17:05:31 Check angles 17:05:31 SkyScan query 17:05:32 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.93<-13462 Statuses=0009 0009 17:05:32 Msec=0 True Az=152.97 Ze=-21.93 Az status=0009 Ze status=0009 17:05:32 Check angles 17:05:32 SkyScan query 17:05:32 SkyScan query done: ret=0 az=135.585<-9039 ze=-0.945<-12063 Statuses=0009 0009 17:05:32 Msec=750 True Az=135.585 Ze=-0.945 Az status=0009 Ze status=0009 17:05:32 Check angles 17:05:32 SkyScan query 17:05:33 SkyScan query done: ret=0 az=118.08<-7872 ze=20.04<-10664 Statuses=0009 0009 17:05:33 Msec=1500 True Az=118.08 Ze=20.04 Az status=0009 Ze status=0009 17:05:33 Check angles 17:05:33 SkyScan query 17:05:34 SkyScan query done: ret=0 az=100.65<-6710 ze=40.95<-9270 Statuses=0009 0009 17:05:34 Msec=2250 True Az=100.65 Ze=40.95 Az status=0009 Ze status=0009 17:05:34 Check angles 17:05:34 SkyScan query 17:05:35 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 17:05:35 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 17:05:35 Check angles 17:05:35 SkyScan query 17:05:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:05:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:05:35 Message to Master queued w/err=0: serial=15269 error=0 17:05:40 Received message from Master: op=Filter serial=15270 17:05:40 Color wheel filter change from 0 to 0 17:05:40 FLIGetFilterPos err=0 currentPosition=0 17:05:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:05:40 Filter is already there-color wheel unchanged 17:05:40 Received message from Master: op=Shutter serial=15271 17:05:40 Shutter LASER close 17:05:41 Received message from Camera: op=State serial=15273 17:05:41 GetSingleValue result=40 Value=cccccccc 17:05:41 SkyScan query 17:05:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:05:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:41 Parameters OK 17:05:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:41 Set A/D data flow result=40 17:05:41 Set A/D channel type result=40 17:05:41 Set A/D encoding result=40 17:05:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:41 Set channel filter=0.000000e+000 result=40 17:05:41 Config A/D Result=40 17:05:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:41 Get A/D filter: -9.255963e+061 result=40 17:05:41 Get A/D value=-858993460 result=40 17:05:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:05:41 Parameters OK 17:05:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:05:41 Set A/D data flow result=40 17:05:41 Set A/D channel type result=40 17:05:41 Set A/D encoding result=40 17:05:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:05:41 Set channel filter=0.000000e+000 result=40 17:05:41 Config A/D Result=40 17:05:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:05:41 Get A/D filter: -9.255963e+061 result=40 17:05:41 Get A/D value=-858993460 result=40 17:05:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:05:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:05:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:05:41 Aux= 17:05:41 Message to Camera, serial 15273 queued 17:06:12 Received message from Master: op=PointingHead serial=15280 17:06:12 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:06:12 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:06:12 Point started: ret=0 17:06:12 point_skyscan result=0 17:06:13 Check angles 17:06:13 SkyScan query 17:06:14 SkyScan query done: ret=0 az=109.605<-7307 ze=38.49<-9434 Statuses=0009 0008 17:06:14 Msec=0 True Az=109.605 Ze=38.49 Az status=0009 Ze status=0008 17:06:14 Check angles 17:06:14 SkyScan query 17:06:14 SkyScan query done: ret=0 az=127.005<-8467 ze=38.505<-9433 Statuses=0009 0008 17:06:14 Msec=750 True Az=127.005 Ze=38.505 Az status=0009 Ze status=0008 17:06:15 Check angles 17:06:15 SkyScan query 17:06:15 SkyScan query done: ret=0 az=144.495<-9633 ze=38.505<-9433 Statuses=0009 0008 17:06:15 Msec=1500 True Az=144.495 Ze=38.505 Az status=0009 Ze status=0008 17:06:15 Check angles 17:06:15 SkyScan query 17:06:16 SkyScan query done: ret=0 az=161.985<-10799 ze=38.505<-9433 Statuses=0009 0008 17:06:16 Msec=2250 True Az=161.985 Ze=38.505 Az status=0009 Ze status=0008 17:06:16 Check angles 17:06:16 SkyScan query 17:06:17 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:06:17 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:06:17 Check angles 17:06:17 SkyScan query 17:06:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:06:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:06:17 Message to Master queued w/err=0: serial=15280 error=0 17:06:22 Received message from Master: op=Filter serial=15281 17:06:22 Color wheel filter change from 0 to 0 17:06:22 FLIGetFilterPos err=0 currentPosition=0 17:06:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:06:22 Filter is already there-color wheel unchanged 17:06:23 Received message from Master: op=Shutter serial=15282 17:06:23 Shutter LASER close 17:06:23 Received message from Camera: op=State serial=15284 17:06:23 GetSingleValue result=40 Value=cccccccc 17:06:23 SkyScan query 17:06:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:06:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:23 Parameters OK 17:06:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:23 Set A/D data flow result=40 17:06:23 Set A/D channel type result=40 17:06:23 Set A/D encoding result=40 17:06:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:23 Set channel filter=0.000000e+000 result=40 17:06:23 Config A/D Result=40 17:06:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:23 Get A/D filter: -9.255963e+061 result=40 17:06:23 Get A/D value=-858993460 result=40 17:06:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:06:23 Parameters OK 17:06:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:06:23 Set A/D data flow result=40 17:06:23 Set A/D channel type result=40 17:06:23 Set A/D encoding result=40 17:06:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:06:23 Set channel filter=0.000000e+000 result=40 17:06:23 Config A/D Result=40 17:06:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:06:23 Get A/D filter: -9.255963e+061 result=40 17:06:23 Get A/D value=-858993460 result=40 17:06:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:06:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:06:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:06:23 Aux= 17:06:23 Message to Camera, serial 15284 queued 17:06:54 Received message from Master: op=PointingHead serial=15291 17:06:54 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:06:54 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:06:54 Point started: ret=0 17:06:54 point_skyscan result=0 17:06:55 Check angles 17:06:55 SkyScan query 17:06:56 SkyScan query done: ret=0 az=153.255<-10217 ze=8.925<-11405 Statuses=0009 0009 17:06:56 Msec=0 True Az=153.255 Ze=8.925 Az status=0009 Ze status=0009 17:06:56 Check angles 17:06:56 SkyScan query 17:06:56 SkyScan query done: ret=0 az=135.78<-9052 ze=-11.985<-12799 Statuses=0009 0009 17:06:56 Msec=750 True Az=135.78 Ze=-11.985 Az status=0009 Ze status=0009 17:06:57 Check angles 17:06:57 SkyScan query 17:06:57 SkyScan query done: ret=0 az=117.87<-7858 ze=-33.345<-14223 Statuses=0009 0009 17:06:57 Msec=1500 True Az=117.87 Ze=-33.345 Az status=0009 Ze status=0009 17:06:57 Check angles 17:06:57 SkyScan query 17:06:58 SkyScan query done: ret=0 az=100.485<-6699 ze=-51.54<-15436 Statuses=0009 0009 17:06:58 Msec=2250 True Az=100.485 Ze=-51.54 Az status=0009 Ze status=0009 17:06:58 Check angles 17:06:58 SkyScan query 17:06:59 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:06:59 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:06:59 Check angles 17:06:59 SkyScan query 17:06:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:06:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:06:59 Message to Master queued w/err=0: serial=15291 error=0 17:07:04 Received message from Master: op=Filter serial=15292 17:07:04 Color wheel filter change from 0 to 0 17:07:04 FLIGetFilterPos err=0 currentPosition=0 17:07:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:04 Filter is already there-color wheel unchanged 17:07:05 Received message from Master: op=Shutter serial=15293 17:07:05 Shutter LASER close 17:07:05 Received message from Camera: op=State serial=15295 17:07:05 GetSingleValue result=40 Value=cccccccc 17:07:05 SkyScan query 17:07:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:07:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:05 Parameters OK 17:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:05 Set A/D data flow result=40 17:07:05 Set A/D channel type result=40 17:07:05 Set A/D encoding result=40 17:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:05 Set channel filter=0.000000e+000 result=40 17:07:05 Config A/D Result=40 17:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:05 Get A/D filter: -9.255963e+061 result=40 17:07:05 Get A/D value=-858993460 result=40 17:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:05 Parameters OK 17:07:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:05 Set A/D data flow result=40 17:07:05 Set A/D channel type result=40 17:07:05 Set A/D encoding result=40 17:07:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:05 Set channel filter=0.000000e+000 result=40 17:07:05 Config A/D Result=40 17:07:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:05 Get A/D filter: -9.255963e+061 result=40 17:07:05 Get A/D value=-858993460 result=40 17:07:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:05 Aux= 17:07:05 Message to Camera, serial 15295 queued 17:07:36 Received message from Master: op=PointingHead serial=15302 17:07:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:07:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:07:36 Point started: ret=0 17:07:36 point_skyscan result=0 17:07:37 Check angles 17:07:37 SkyScan query 17:07:38 SkyScan query done: ret=0 az=108.735<-7249 ze=-81.03<-17402 Statuses=0009 0009 17:07:38 Msec=0 True Az=108.735 Ze=-81.03 Az status=0009 Ze status=0009 17:07:38 Check angles 17:07:38 SkyScan query 17:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-101.97<-18798 Statuses=0008 0009 17:07:39 Msec=750 True Az=112.995 Ze=-101.97 Az status=0008 Ze status=0009 17:07:39 Check angles 17:07:39 SkyScan query 17:07:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.435<-20229 Statuses=0008 0009 17:07:39 Msec=1500 True Az=112.995 Ze=-123.435 Az status=0008 Ze status=0009 17:07:40 Check angles 17:07:40 SkyScan query 17:07:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.315<-21621 Statuses=0008 0009 17:07:40 Msec=2250 True Az=112.995 Ze=-144.315 Az status=0008 Ze status=0009 17:07:40 Check angles 17:07:40 SkyScan query 17:07:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.675<-23045 Statuses=0008 0009 17:07:41 Msec=3000 True Az=112.995 Ze=-165.675 Az status=0008 Ze status=0009 17:07:41 Check angles 17:07:41 SkyScan query 17:07:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:07:42 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:07:42 Message to Master queued w/err=0: serial=15302 error=0 17:07:47 Received message from Master: op=Filter serial=15303 17:07:47 Color wheel filter change from 0 to 0 17:07:47 FLIGetFilterPos err=0 currentPosition=0 17:07:47 FLIGetStepsRemaining err=0 RemainingSteps=0 17:07:47 Filter is already there-color wheel unchanged 17:07:47 Received message from Master: op=Shutter serial=15304 17:07:47 Shutter LASER open 17:07:47 Received message from Camera: op=State serial=15306 17:07:47 GetSingleValue result=40 Value=cccccccc 17:07:47 SkyScan query 17:07:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:07:48 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:48 Parameters OK 17:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:48 Set A/D data flow result=40 17:07:48 Set A/D channel type result=40 17:07:48 Set A/D encoding result=40 17:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:48 Set channel filter=0.000000e+000 result=40 17:07:48 Config A/D Result=40 17:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:48 Get A/D filter: -9.255963e+061 result=40 17:07:48 Get A/D value=-858993460 result=40 17:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:48 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:07:48 Parameters OK 17:07:48 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:07:48 Set A/D data flow result=40 17:07:48 Set A/D channel type result=40 17:07:48 Set A/D encoding result=40 17:07:48 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:07:48 Set channel filter=0.000000e+000 result=40 17:07:48 Config A/D Result=40 17:07:48 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:07:48 Get A/D filter: -9.255963e+061 result=40 17:07:48 Get A/D value=-858993460 result=40 17:07:48 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:07:48 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:07:48 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:07:48 Aux= 17:07:48 Message to Camera, serial 15306 queued 17:07:50 Received message from Master: op=Shutter serial=15310 17:07:50 Shutter LASER close 17:07:50 Received message from Master: op=PointingHead serial=15314 17:07:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:07:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:07:51 Point started: ret=0 17:07:51 point_skyscan result=0 17:07:51 Check angles 17:07:51 SkyScan query 17:07:52 SkyScan query done: ret=0 az=90.225<-6015 ze=157.56<-1496 Statuses=0009 0009 17:07:52 Msec=0 True Az=90.225 Ze=157.56 Az status=0009 Ze status=0009 17:07:52 Check angles 17:07:52 SkyScan query 17:07:53 SkyScan query done: ret=0 az=72.795<-4853 ze=136.605<-2893 Statuses=0009 0009 17:07:53 Msec=750 True Az=72.795 Ze=136.605 Az status=0009 Ze status=0009 17:07:53 Check angles 17:07:53 SkyScan query 17:07:54 SkyScan query done: ret=0 az=55.215<-3681 ze=115.635<-4291 Statuses=0009 0009 17:07:54 Msec=1500 True Az=55.215 Ze=115.635 Az status=0009 Ze status=0009 17:07:54 Check angles 17:07:54 SkyScan query 17:07:54 SkyScan query done: ret=0 az=40.845<-2723 ze=94.71<-5686 Statuses=0009 0009 17:07:54 Msec=2250 True Az=40.845 Ze=94.71 Az status=0009 Ze status=0009 17:07:54 Check angles 17:07:54 SkyScan query 17:07:55 SkyScan query done: ret=0 az=40.995<-2733 ze=73.74<-7084 Statuses=0008 0009 17:07:55 Msec=3000 True Az=40.995 Ze=73.74 Az status=0008 Ze status=0009 17:07:55 Check angles 17:07:55 SkyScan query 17:07:56 SkyScan query done: ret=0 az=40.995<-2733 ze=53.055<-8463 Statuses=0008 0009 17:07:56 Msec=3750 True Az=40.995 Ze=53.055 Az status=0008 Ze status=0009 17:07:56 Check angles 17:07:56 SkyScan query 17:07:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:07:57 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:07:57 Message to Master queued w/err=0: serial=15314 error=0 17:08:02 Received message from Master: op=Filter serial=15315 17:08:02 Color wheel filter change from 0 to 0 17:08:02 FLIGetFilterPos err=0 currentPosition=0 17:08:02 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:02 Filter is already there-color wheel unchanged 17:08:02 Received message from Master: op=Shutter serial=15316 17:08:02 Shutter LASER close 17:08:02 Received message from Camera: op=State serial=15318 17:08:02 GetSingleValue result=40 Value=cccccccc 17:08:02 SkyScan query 17:08:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:08:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:02 Parameters OK 17:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:02 Set A/D data flow result=40 17:08:02 Set A/D channel type result=40 17:08:02 Set A/D encoding result=40 17:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:02 Set channel filter=0.000000e+000 result=40 17:08:02 Config A/D Result=40 17:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:02 Get A/D filter: -9.255963e+061 result=40 17:08:02 Get A/D value=-858993460 result=40 17:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:02 Parameters OK 17:08:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:02 Set A/D data flow result=40 17:08:02 Set A/D channel type result=40 17:08:02 Set A/D encoding result=40 17:08:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:02 Set channel filter=0.000000e+000 result=40 17:08:02 Config A/D Result=40 17:08:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:02 Get A/D filter: -9.255963e+061 result=40 17:08:02 Get A/D value=-858993460 result=40 17:08:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:02 Aux= 17:08:02 Message to Camera, serial 15318 queued 17:08:33 Received message from Master: op=PointingHead serial=15325 17:08:33 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:08:33 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:08:34 Point started: ret=0 17:08:34 point_skyscan result=0 17:08:35 Check angles 17:08:35 SkyScan query 17:08:35 SkyScan query done: ret=0 az=40.995<-2733 ze=21.96<-10536 Statuses=0008 0009 17:08:35 Msec=0 True Az=40.995 Ze=21.96 Az status=0008 Ze status=0009 17:08:35 Check angles 17:08:35 SkyScan query 17:08:36 SkyScan query done: ret=0 az=40.995<-2733 ze=0.975<-11935 Statuses=0008 0009 17:08:36 Msec=750 True Az=40.995 Ze=0.975 Az status=0008 Ze status=0009 17:08:36 Check angles 17:08:36 SkyScan query 17:08:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.4<-13360 Statuses=0008 0009 17:08:37 Msec=1500 True Az=40.995 Ze=-20.4 Az status=0008 Ze status=0009 17:08:37 Check angles 17:08:37 SkyScan query 17:08:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 17:08:37 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 17:08:38 Check angles 17:08:38 SkyScan query 17:08:38 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 17:08:38 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 17:08:38 Message to Master queued w/err=0: serial=15325 error=0 17:08:43 Received message from Master: op=Filter serial=15326 17:08:43 Color wheel filter change from 0 to 0 17:08:43 FLIGetFilterPos err=0 currentPosition=0 17:08:43 FLIGetStepsRemaining err=0 RemainingSteps=0 17:08:43 Filter is already there-color wheel unchanged 17:08:43 Received message from Master: op=Shutter serial=15327 17:08:43 Shutter LASER close 17:08:43 Received message from Camera: op=State serial=15329 17:08:43 GetSingleValue result=40 Value=cccccccc 17:08:43 SkyScan query 17:08:44 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:08:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:44 Parameters OK 17:08:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:44 Set A/D data flow result=40 17:08:44 Set A/D channel type result=40 17:08:44 Set A/D encoding result=40 17:08:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:44 Set channel filter=0.000000e+000 result=40 17:08:44 Config A/D Result=40 17:08:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:44 Get A/D filter: -9.255963e+061 result=40 17:08:44 Get A/D value=-858993460 result=40 17:08:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:08:44 Parameters OK 17:08:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:08:44 Set A/D data flow result=40 17:08:44 Set A/D channel type result=40 17:08:44 Set A/D encoding result=40 17:08:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:08:44 Set channel filter=0.000000e+000 result=40 17:08:44 Config A/D Result=40 17:08:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:08:44 Get A/D filter: -9.255963e+061 result=40 17:08:44 Get A/D value=-858993460 result=40 17:08:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:08:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:08:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:08:44 Aux= 17:08:44 Message to Camera, serial 15329 queued 17:09:15 Received message from Master: op=PointingHead serial=15336 17:09:15 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:09:15 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:09:15 Point started: ret=0 17:09:15 point_skyscan result=0 17:09:16 Check angles 17:09:16 SkyScan query 17:09:17 SkyScan query done: ret=0 az=63.975<-4265 ze=-68.355<-16557 Statuses=0009 0009 17:09:17 Msec=0 True Az=63.975 Ze=-68.355 Az status=0009 Ze status=0009 17:09:17 Check angles 17:09:17 SkyScan query 17:09:17 SkyScan query done: ret=0 az=81.555<-5437 ze=-89.31<-17954 Statuses=0009 0009 17:09:17 Msec=750 True Az=81.555 Ze=-89.31 Az status=0009 Ze status=0009 17:09:17 Check angles 17:09:17 SkyScan query 17:09:18 SkyScan query done: ret=0 az=99.165<-6611 ze=-110.265<-19351 Statuses=0009 0009 17:09:18 Msec=1500 True Az=99.165 Ze=-110.265 Az status=0009 Ze status=0009 17:09:18 Check angles 17:09:18 SkyScan query 17:09:19 SkyScan query done: ret=0 az=116.55<-7770 ze=-131.19<-20746 Statuses=0009 0009 17:09:19 Msec=2250 True Az=116.55 Ze=-131.19 Az status=0009 Ze status=0009 17:09:19 Check angles 17:09:19 SkyScan query 17:09:20 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 17:09:20 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 17:09:20 Check angles 17:09:20 SkyScan query 17:09:20 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:09:20 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:09:20 Message to Master queued w/err=0: serial=15336 error=0 17:09:25 Received message from Master: op=Filter serial=15337 17:09:25 Color wheel filter change from 0 to 0 17:09:25 FLIGetFilterPos err=0 currentPosition=0 17:09:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:09:25 Filter is already there-color wheel unchanged 17:09:25 Received message from Master: op=Shutter serial=15338 17:09:25 Shutter LASER close 17:09:25 Received message from Camera: op=State serial=15340 17:09:25 GetSingleValue result=40 Value=cccccccc 17:09:25 SkyScan query 17:09:26 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:09:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:26 Parameters OK 17:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:26 Set A/D data flow result=40 17:09:26 Set A/D channel type result=40 17:09:26 Set A/D encoding result=40 17:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:26 Set channel filter=0.000000e+000 result=40 17:09:26 Config A/D Result=40 [UTC 2018-12-4 17:09:26] 17:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:26 Get A/D filter: -9.255963e+061 result=40 17:09:26 Get A/D value=-858993460 result=40 17:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:09:26 Parameters OK 17:09:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:09:26 Set A/D data flow result=40 17:09:26 Set A/D channel type result=40 17:09:26 Set A/D encoding result=40 17:09:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:09:26 Set channel filter=0.000000e+000 result=40 17:09:26 Config A/D Result=40 17:09:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:09:26 Get A/D filter: -9.255963e+061 result=40 17:09:26 Get A/D value=-858993460 result=40 17:09:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:09:26 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:09:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:09:26 Aux= 17:09:26 Message to Camera, serial 15340 queued 17:09:57 Received message from Master: op=PointingHead serial=15347 17:09:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:09:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:09:57 Point started: ret=0 17:09:57 point_skyscan result=0 17:09:58 Check angles 17:09:58 SkyScan query 17:09:59 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.925<-23395 Statuses=0009 0009 17:09:59 Msec=0 True Az=113.01 Ze=-170.925 Az status=0009 Ze status=0009 17:09:59 Check angles 17:09:59 SkyScan query 17:09:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:09:59 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:09:59 Message to Master queued w/err=0: serial=15347 error=0 17:10:04 Received message from Master: op=Filter serial=15348 17:10:04 Color wheel filter change from 0 to 0 17:10:04 FLIGetFilterPos err=0 currentPosition=0 17:10:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:04 Filter is already there-color wheel unchanged 17:10:05 Received message from Master: op=Shutter serial=15349 17:10:05 Shutter LASER open 17:10:05 Received message from Camera: op=State serial=15351 17:10:05 GetSingleValue result=40 Value=cccccccc 17:10:05 SkyScan query 17:10:05 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:10:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:05 Parameters OK 17:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:05 Set A/D data flow result=40 17:10:05 Set A/D channel type result=40 17:10:05 Set A/D encoding result=40 17:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:05 Set channel filter=0.000000e+000 result=40 17:10:05 Config A/D Result=40 17:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:05 Get A/D filter: -9.255963e+061 result=40 17:10:05 Get A/D value=-858993460 result=40 17:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:05 Parameters OK 17:10:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:05 Set A/D data flow result=40 17:10:05 Set A/D channel type result=40 17:10:05 Set A/D encoding result=40 17:10:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:05 Set channel filter=0.000000e+000 result=40 17:10:05 Config A/D Result=40 17:10:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:05 Get A/D filter: -9.255963e+061 result=40 17:10:05 Get A/D value=-858993460 result=40 17:10:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:05 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:05 Aux= 17:10:05 Message to Camera, serial 15351 queued 17:10:08 Received message from Master: op=Shutter serial=15355 17:10:08 Shutter LASER close 17:10:08 Received message from Master: op=PointingHead serial=15359 17:10:08 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:10:08 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:10:09 Point started: ret=0 17:10:09 point_skyscan result=0 17:10:09 Check angles 17:10:09 SkyScan query 17:10:10 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.145<-21543 Statuses=0009 0009 17:10:10 Msec=0 True Az=136.02 Ze=-143.145 Az status=0009 Ze status=0009 17:10:10 Check angles 17:10:10 SkyScan query 17:10:11 SkyScan query done: ret=0 az=153.585<-10239 ze=-122.16<-20144 Statuses=0009 0009 17:10:11 Msec=750 True Az=153.585 Ze=-122.16 Az status=0009 Ze status=0009 17:10:11 Check angles 17:10:11 SkyScan query 17:10:11 SkyScan query done: ret=0 az=170.925<-11395 ze=-101.265<-18751 Statuses=0009 0009 17:10:11 Msec=1500 True Az=170.925 Ze=-101.265 Az status=0009 Ze status=0009 17:10:12 Check angles 17:10:12 SkyScan query 17:10:12 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.28<-17352 Statuses=0008 0009 17:10:12 Msec=2250 True Az=176.025 Ze=-80.28 Az status=0008 Ze status=0009 17:10:12 Check angles 17:10:12 SkyScan query 17:10:13 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.355<-15957 Statuses=0008 0009 17:10:13 Msec=3000 True Az=176.01 Ze=-59.355 Az status=0008 Ze status=0009 17:10:13 Check angles 17:10:13 SkyScan query 17:10:14 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:10:14 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:10:14 Message to Master queued w/err=0: serial=15359 error=0 17:10:19 Received message from Master: op=Filter serial=15360 17:10:19 Color wheel filter change from 0 to 0 17:10:19 FLIGetFilterPos err=0 currentPosition=0 17:10:19 FLIGetStepsRemaining err=0 RemainingSteps=0 17:10:19 Filter is already there-color wheel unchanged 17:10:19 Received message from Master: op=Shutter serial=15361 17:10:19 Shutter LASER close 17:10:19 Received message from Camera: op=State serial=15363 17:10:19 GetSingleValue result=40 Value=cccccccc 17:10:19 SkyScan query 17:10:20 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:10:20 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:20 Parameters OK 17:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:20 Set A/D data flow result=40 17:10:20 Set A/D channel type result=40 17:10:20 Set A/D encoding result=40 17:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:20 Set channel filter=0.000000e+000 result=40 17:10:20 Config A/D Result=40 17:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:20 Get A/D filter: -9.255963e+061 result=40 17:10:20 Get A/D value=-858993460 result=40 17:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:20 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:10:20 Parameters OK 17:10:20 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:10:20 Set A/D data flow result=40 17:10:20 Set A/D channel type result=40 17:10:20 Set A/D encoding result=40 17:10:20 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:10:20 Set channel filter=0.000000e+000 result=40 17:10:20 Config A/D Result=40 17:10:20 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:10:20 Get A/D filter: -9.255963e+061 result=40 17:10:20 Get A/D value=-858993460 result=40 17:10:20 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:10:20 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:10:20 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:10:20 Aux= 17:10:20 Message to Camera, serial 15363 queued 17:10:51 Received message from Master: op=PointingHead serial=15370 17:10:51 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:10:51 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:10:51 Point started: ret=0 17:10:51 point_skyscan result=0 17:10:52 Check angles 17:10:52 SkyScan query 17:10:52 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.72<-13448 Statuses=0009 0009 17:10:52 Msec=0 True Az=152.925 Ze=-21.72 Az status=0009 Ze status=0009 17:10:52 Check angles 17:10:52 SkyScan query 17:10:53 SkyScan query done: ret=0 az=135.12<-9008 ze=-0.27<-12018 Statuses=0009 0009 17:10:53 Msec=750 True Az=135.12 Ze=-0.27 Az status=0009 Ze status=0009 17:10:53 Check angles 17:10:53 SkyScan query 17:10:54 SkyScan query done: ret=0 az=117.585<-7839 ze=20.64<-10624 Statuses=0009 0009 17:10:54 Msec=1500 True Az=117.585 Ze=20.64 Az status=0009 Ze status=0009 17:10:54 Check angles 17:10:54 SkyScan query 17:10:55 SkyScan query done: ret=0 az=100.215<-6681 ze=41.625<-9225 Statuses=0009 0009 17:10:55 Msec=2250 True Az=100.215 Ze=41.625 Az status=0009 Ze status=0009 17:10:55 Check angles 17:10:55 SkyScan query 17:10:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.54<-8564 Statuses=0009 0008 17:10:55 Msec=3000 True Az=85.995 Ze=51.54 Az status=0009 Ze status=0008 17:10:55 Check angles 17:10:55 SkyScan query 17:10:56 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:10:56 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:10:56 Message to Master queued w/err=0: serial=15370 error=0 17:11:01 Received message from Master: op=Filter serial=15371 17:11:01 Color wheel filter change from 0 to 0 17:11:01 FLIGetFilterPos err=0 currentPosition=0 17:11:01 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:01 Filter is already there-color wheel unchanged 17:11:01 Received message from Master: op=Shutter serial=15372 17:11:01 Shutter LASER close 17:11:01 Received message from Camera: op=State serial=15374 17:11:01 GetSingleValue result=40 Value=cccccccc 17:11:01 SkyScan query 17:11:02 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:11:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:02 Parameters OK 17:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:02 Set A/D data flow result=40 17:11:02 Set A/D channel type result=40 17:11:02 Set A/D encoding result=40 17:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:02 Set channel filter=0.000000e+000 result=40 17:11:02 Config A/D Result=40 17:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:02 Get A/D filter: -9.255963e+061 result=40 17:11:02 Get A/D value=-858993460 result=40 17:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:02 Parameters OK 17:11:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:02 Set A/D data flow result=40 17:11:02 Set A/D channel type result=40 17:11:02 Set A/D encoding result=40 17:11:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:02 Set channel filter=0.000000e+000 result=40 17:11:02 Config A/D Result=40 17:11:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:02 Get A/D filter: -9.255963e+061 result=40 17:11:02 Get A/D value=-858993460 result=40 17:11:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:02 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:02 Aux= 17:11:02 Message to Camera, serial 15374 queued 17:11:33 Received message from Master: op=PointingHead serial=15381 17:11:33 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:11:33 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:11:33 Point started: ret=0 17:11:33 point_skyscan result=0 17:11:34 Check angles 17:11:34 SkyScan query 17:11:34 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 17:11:34 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 17:11:35 Check angles 17:11:35 SkyScan query 17:11:35 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 17:11:35 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 17:11:35 Check angles 17:11:35 SkyScan query 17:11:36 SkyScan query done: ret=0 az=144.39<-9626 ze=38.505<-9433 Statuses=0009 0008 17:11:36 Msec=1500 True Az=144.39 Ze=38.505 Az status=0009 Ze status=0008 17:11:36 Check angles 17:11:36 SkyScan query 17:11:37 SkyScan query done: ret=0 az=162.255<-10817 ze=38.505<-9433 Statuses=0009 0008 17:11:37 Msec=2250 True Az=162.255 Ze=38.505 Az status=0009 Ze status=0008 17:11:37 Check angles 17:11:37 SkyScan query 17:11:37 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:11:37 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:11:38 Check angles 17:11:38 SkyScan query 17:11:38 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:11:38 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:11:38 Message to Master queued w/err=0: serial=15381 error=0 17:11:43 Received message from Master: op=Filter serial=15382 17:11:43 Color wheel filter change from 0 to 0 17:11:43 FLIGetFilterPos err=0 currentPosition=0 17:11:43 FLIGetStepsRemaining err=0 RemainingSteps=0 17:11:43 Filter is already there-color wheel unchanged 17:11:43 Received message from Master: op=Shutter serial=15383 17:11:43 Shutter LASER close 17:11:43 Received message from Camera: op=State serial=15385 17:11:43 GetSingleValue result=40 Value=cccccccc 17:11:43 SkyScan query 17:11:44 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:11:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:44 Parameters OK 17:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:44 Set A/D data flow result=40 17:11:44 Set A/D channel type result=40 17:11:44 Set A/D encoding result=40 17:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:44 Set channel filter=0.000000e+000 result=40 17:11:44 Config A/D Result=40 17:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:44 Get A/D filter: -9.255963e+061 result=40 17:11:44 Get A/D value=-858993460 result=40 17:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:11:44 Parameters OK 17:11:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:11:44 Set A/D data flow result=40 17:11:44 Set A/D channel type result=40 17:11:44 Set A/D encoding result=40 17:11:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:11:44 Set channel filter=0.000000e+000 result=40 17:11:44 Config A/D Result=40 17:11:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:11:44 Get A/D filter: -9.255963e+061 result=40 17:11:44 Get A/D value=-858993460 result=40 17:11:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:11:44 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:11:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:11:44 Aux= 17:11:44 Message to Camera, serial 15385 queued [UTC 2018-12-4 17:12:09] 17:12:15 Received message from Master: op=PointingHead serial=15392 17:12:15 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:12:15 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:12:15 Point started: ret=0 17:12:15 point_skyscan result=0 17:12:16 Check angles 17:12:16 SkyScan query 17:12:16 SkyScan query done: ret=0 az=153.21<-10214 ze=8.925<-11405 Statuses=0009 0009 17:12:16 Msec=0 True Az=153.21 Ze=8.925 Az status=0009 Ze status=0009 17:12:17 Check angles 17:12:17 SkyScan query 17:12:17 SkyScan query done: ret=0 az=135.84<-9056 ze=-12.015<-12801 Statuses=0009 0009 17:12:17 Msec=750 True Az=135.84 Ze=-12.015 Az status=0009 Ze status=0009 17:12:17 Check angles 17:12:17 SkyScan query 17:12:18 SkyScan query done: ret=0 az=118.23<-7882 ze=-32.97<-14198 Statuses=0009 0009 17:12:18 Msec=1500 True Az=118.23 Ze=-32.97 Az status=0009 Ze status=0009 17:12:18 Check angles 17:12:18 SkyScan query 17:12:19 SkyScan query done: ret=0 az=100.5<-6700 ze=-51.54<-15436 Statuses=0009 0009 17:12:19 Msec=2250 True Az=100.5 Ze=-51.54 Az status=0009 Ze status=0009 17:12:19 Check angles 17:12:19 SkyScan query 17:12:19 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:12:19 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:12:20 Check angles 17:12:20 SkyScan query 17:12:20 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:12:20 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 17:12:20 Message to Master queued w/err=0: serial=15392 error=0 17:12:25 Received message from Master: op=Filter serial=15393 17:12:25 Color wheel filter change from 0 to 0 17:12:25 FLIGetFilterPos err=0 currentPosition=0 17:12:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:12:25 Filter is already there-color wheel unchanged 17:12:25 Received message from Master: op=Shutter serial=15394 17:12:25 Shutter LASER close 17:12:25 Received message from Camera: op=State serial=15396 17:12:25 GetSingleValue result=40 Value=cccccccc 17:12:25 SkyScan query 17:12:26 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:12:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:26 Parameters OK 17:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:26 Set A/D data flow result=40 17:12:26 Set A/D channel type result=40 17:12:26 Set A/D encoding result=40 17:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:26 Set channel filter=0.000000e+000 result=40 17:12:26 Config A/D Result=40 17:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:26 Get A/D filter: -9.255963e+061 result=40 17:12:26 Get A/D value=-858993460 result=40 17:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:12:26 Parameters OK 17:12:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:12:26 Set A/D data flow result=40 17:12:26 Set A/D channel type result=40 17:12:26 Set A/D encoding result=40 17:12:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:12:26 Set channel filter=0.000000e+000 result=40 17:12:26 Config A/D Result=40 17:12:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:12:26 Get A/D filter: -9.255963e+061 result=40 17:12:26 Get A/D value=-858993460 result=40 17:12:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:12:26 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:12:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:12:26 Aux= 17:12:26 Message to Camera, serial 15396 queued 17:12:57 Received message from Master: op=PointingHead serial=15403 17:12:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:12:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:12:57 Point started: ret=0 17:12:57 point_skyscan result=0 17:12:58 Check angles 17:12:58 SkyScan query 17:12:59 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.24<-17416 Statuses=0009 0009 17:12:59 Msec=0 True Az=109.02 Ze=-81.24 Az status=0009 Ze status=0009 17:12:59 Check angles 17:12:59 SkyScan query 17:12:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.195<-18813 Statuses=0008 0009 17:12:59 Msec=750 True Az=112.995 Ze=-102.195 Az status=0008 Ze status=0009 17:12:59 Check angles 17:12:59 SkyScan query 17:13:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.135<-20209 Statuses=0008 0009 17:13:00 Msec=1500 True Az=112.995 Ze=-123.135 Az status=0008 Ze status=0009 17:13:00 Check angles 17:13:00 SkyScan query 17:13:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.09<-21606 Statuses=0008 0009 17:13:01 Msec=2250 True Az=112.995 Ze=-144.09 Az status=0008 Ze status=0009 17:13:01 Check angles 17:13:01 SkyScan query 17:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.06<-23004 Statuses=0008 0009 17:13:02 Msec=3000 True Az=112.995 Ze=-165.06 Az status=0008 Ze status=0009 17:13:02 Check angles 17:13:02 SkyScan query 17:13:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:13:02 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:13:02 Message to Master queued w/err=0: serial=15403 error=0 17:13:07 Received message from Master: op=Filter serial=15404 17:13:07 Color wheel filter change from 0 to 0 17:13:07 FLIGetFilterPos err=0 currentPosition=0 17:13:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:07 Filter is already there-color wheel unchanged 17:13:07 Received message from Master: op=Shutter serial=15405 17:13:07 Shutter LASER open 17:13:08 Received message from Camera: op=State serial=15407 17:13:08 GetSingleValue result=40 Value=cccccccc 17:13:08 SkyScan query 17:13:08 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:13:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:08 Parameters OK 17:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:08 Set A/D data flow result=40 17:13:08 Set A/D channel type result=40 17:13:08 Set A/D encoding result=40 17:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:08 Set channel filter=0.000000e+000 result=40 17:13:08 Config A/D Result=40 17:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:08 Get A/D filter: -9.255963e+061 result=40 17:13:08 Get A/D value=-858993460 result=40 17:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:08 Parameters OK 17:13:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:08 Set A/D data flow result=40 17:13:08 Set A/D channel type result=40 17:13:08 Set A/D encoding result=40 17:13:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:08 Set channel filter=0.000000e+000 result=40 17:13:08 Config A/D Result=40 17:13:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:08 Get A/D filter: -9.255963e+061 result=40 17:13:08 Get A/D value=-858993460 result=40 17:13:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:08 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:08 Aux= 17:13:08 Message to Camera, serial 15407 queued 17:13:11 Received message from Master: op=Shutter serial=15411 17:13:11 Shutter LASER close 17:13:11 Received message from Master: op=PointingHead serial=15415 17:13:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:13:11 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:13:11 Point started: ret=0 17:13:11 point_skyscan result=0 17:13:12 Check angles 17:13:12 SkyScan query 17:13:13 SkyScan query done: ret=0 az=89.985<-5999 ze=157.395<-1507 Statuses=0009 0009 17:13:13 Msec=0 True Az=89.985 Ze=157.395 Az status=0009 Ze status=0009 17:13:13 Check angles 17:13:13 SkyScan query 17:13:14 SkyScan query done: ret=0 az=72.195<-4813 ze=135.99<-2934 Statuses=0009 0009 17:13:14 Msec=750 True Az=72.195 Ze=135.99 Az status=0009 Ze status=0009 17:13:14 Check angles 17:13:14 SkyScan query 17:13:14 SkyScan query done: ret=0 az=54.585<-3639 ze=114.615<-4359 Statuses=0009 0009 17:13:14 Msec=1500 True Az=54.585 Ze=114.615 Az status=0009 Ze status=0009 17:13:14 Check angles 17:13:14 SkyScan query 17:13:15 SkyScan query done: ret=0 az=40.935<-2729 ze=93.645<-5757 Statuses=0009 0009 17:13:15 Msec=2250 True Az=40.935 Ze=93.645 Az status=0009 Ze status=0009 17:13:15 Check angles 17:13:15 SkyScan query 17:13:16 SkyScan query done: ret=0 az=41.01<-2734 ze=72.69<-7154 Statuses=0008 0009 17:13:16 Msec=3000 True Az=41.01 Ze=72.69 Az status=0008 Ze status=0009 17:13:16 Check angles 17:13:16 SkyScan query 17:13:17 SkyScan query done: ret=0 az=40.995<-2733 ze=52.38<-8508 Statuses=0008 0009 17:13:17 Msec=3750 True Az=40.995 Ze=52.38 Az status=0008 Ze status=0009 17:13:17 Check angles 17:13:17 SkyScan query 17:13:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:13:17 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:13:17 Message to Master queued w/err=0: serial=15415 error=0 17:13:22 Received message from Master: op=Filter serial=15416 17:13:22 Color wheel filter change from 0 to 0 17:13:22 FLIGetFilterPos err=0 currentPosition=0 17:13:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:13:22 Filter is already there-color wheel unchanged 17:13:22 Received message from Master: op=Shutter serial=15417 17:13:22 Shutter LASER close 17:13:23 Received message from Camera: op=State serial=15419 17:13:23 GetSingleValue result=40 Value=cccccccc 17:13:23 SkyScan query 17:13:23 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:13:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:23 Parameters OK 17:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:23 Set A/D data flow result=40 17:13:23 Set A/D channel type result=40 17:13:23 Set A/D encoding result=40 17:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:23 Set channel filter=0.000000e+000 result=40 17:13:23 Config A/D Result=40 17:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:23 Get A/D filter: -9.255963e+061 result=40 17:13:23 Get A/D value=-858993460 result=40 17:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:13:23 Parameters OK 17:13:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:13:23 Set A/D data flow result=40 17:13:23 Set A/D channel type result=40 17:13:23 Set A/D encoding result=40 17:13:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:13:23 Set channel filter=0.000000e+000 result=40 17:13:23 Config A/D Result=40 17:13:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:13:23 Get A/D filter: -9.255963e+061 result=40 17:13:23 Get A/D value=-858993460 result=40 17:13:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:13:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:13:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:13:23 Aux= 17:13:23 Message to Camera, serial 15419 queued 17:13:54 Received message from Master: op=PointingHead serial=15426 17:13:54 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:13:54 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:13:55 Point started: ret=0 17:13:55 point_skyscan result=0 17:13:55 Check angles 17:13:55 SkyScan query 17:13:56 SkyScan query done: ret=0 az=40.995<-2733 ze=21.165<-10589 Statuses=0008 0009 17:13:56 Msec=0 True Az=40.995 Ze=21.165 Az status=0008 Ze status=0009 17:13:56 Check angles 17:13:56 SkyScan query 17:13:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-0.21<-12014 Statuses=0008 0009 17:13:57 Msec=750 True Az=40.995 Ze=-0.21 Az status=0008 Ze status=0009 17:13:57 Check angles 17:13:57 SkyScan query 17:13:57 SkyScan query done: ret=0 az=40.995<-2733 ze=-21.6<-13440 Statuses=0008 0009 17:13:57 Msec=1500 True Az=40.995 Ze=-21.6 Az status=0008 Ze status=0009 17:13:58 Check angles 17:13:58 SkyScan query 17:13:58 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.58<-14572 Statuses=0008 0009 17:13:58 Msec=2250 True Az=40.995 Ze=-38.58 Az status=0008 Ze status=0009 17:13:58 Check angles 17:13:58 SkyScan query 17:13:59 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 17:13:59 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 17:13:59 Message to Master queued w/err=0: serial=15426 error=0 17:14:04 Received message from Master: op=Filter serial=15427 17:14:04 Color wheel filter change from 0 to 0 17:14:04 FLIGetFilterPos err=0 currentPosition=0 17:14:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:04 Filter is already there-color wheel unchanged 17:14:04 Received message from Master: op=Shutter serial=15428 17:14:04 Shutter LASER close 17:14:04 Received message from Camera: op=State serial=15430 17:14:04 GetSingleValue result=40 Value=cccccccc 17:14:04 SkyScan query 17:14:05 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:14:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:05 Parameters OK 17:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:05 Set A/D data flow result=40 17:14:05 Set A/D channel type result=40 17:14:05 Set A/D encoding result=40 17:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:05 Set channel filter=0.000000e+000 result=40 17:14:05 Config A/D Result=40 17:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:05 Get A/D filter: -9.255963e+061 result=40 17:14:05 Get A/D value=-858993460 result=40 17:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:05 Parameters OK 17:14:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:05 Set A/D data flow result=40 17:14:05 Set A/D channel type result=40 17:14:05 Set A/D encoding result=40 17:14:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:05 Set channel filter=0.000000e+000 result=40 17:14:05 Config A/D Result=40 17:14:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:05 Get A/D filter: -9.255963e+061 result=40 17:14:05 Get A/D value=-858993460 result=40 17:14:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:05 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:05 Aux= 17:14:05 Message to Camera, serial 15430 queued 17:14:36 Received message from Master: op=PointingHead serial=15437 17:14:36 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:14:36 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:14:36 Point started: ret=0 17:14:36 point_skyscan result=0 17:14:37 Check angles 17:14:37 SkyScan query 17:14:37 SkyScan query done: ret=0 az=64.23<-4282 ze=-68.76<-16584 Statuses=0009 0009 17:14:37 Msec=0 True Az=64.23 Ze=-68.76 Az status=0009 Ze status=0009 17:14:37 Check angles 17:14:37 SkyScan query 17:14:38 SkyScan query done: ret=0 az=81.96<-5464 ze=-89.745<-17983 Statuses=0009 0009 17:14:38 Msec=750 True Az=81.96 Ze=-89.745 Az status=0009 Ze status=0009 17:14:38 Check angles 17:14:38 SkyScan query 17:14:39 SkyScan query done: ret=0 az=99.75<-6650 ze=-111.12<-19408 Statuses=0009 0009 17:14:39 Msec=1500 True Az=99.75 Ze=-111.12 Az status=0009 Ze status=0009 17:14:39 Check angles 17:14:39 SkyScan query 17:14:39 SkyScan query done: ret=0 az=117.21<-7814 ze=-132.06<-20804 Statuses=0009 0009 17:14:39 Msec=2250 True Az=117.21 Ze=-132.06 Az status=0009 Ze status=0009 17:14:40 Check angles 17:14:40 SkyScan query 17:14:40 SkyScan query done: ret=0 az=131.1<-8740 ze=-141.54<-21436 Statuses=0009 0008 17:14:40 Msec=3000 True Az=131.1 Ze=-141.54 Az status=0009 Ze status=0008 17:14:40 Check angles 17:14:40 SkyScan query 17:14:41 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.51<-21434 Statuses=0008 0008 17:14:41 Msec=3750 True Az=131.01 Ze=-141.51 Az status=0008 Ze status=0008 17:14:41 Message to Master queued w/err=0: serial=15437 error=0 17:14:46 Received message from Master: op=Filter serial=15438 17:14:46 Color wheel filter change from 0 to 0 17:14:46 FLIGetFilterPos err=0 currentPosition=0 17:14:46 FLIGetStepsRemaining err=0 RemainingSteps=0 17:14:46 Filter is already there-color wheel unchanged 17:14:46 Received message from Master: op=Shutter serial=15439 17:14:46 Shutter LASER close 17:14:46 Received message from Camera: op=State serial=15441 17:14:46 GetSingleValue result=40 Value=cccccccc 17:14:46 SkyScan query 17:14:47 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:14:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:47 Parameters OK 17:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:47 Set A/D data flow result=40 17:14:47 Set A/D channel type result=40 17:14:47 Set A/D encoding result=40 17:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:47 Set channel filter=0.000000e+000 result=40 17:14:47 Config A/D Result=40 17:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:47 Get A/D filter: -9.255963e+061 result=40 17:14:47 Get A/D value=-858993460 result=40 17:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:14:47 Parameters OK 17:14:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:14:47 Set A/D data flow result=40 17:14:47 Set A/D channel type result=40 17:14:47 Set A/D encoding result=40 17:14:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:14:47 Set channel filter=0.000000e+000 result=40 17:14:47 Config A/D Result=40 17:14:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:14:47 Get A/D filter: -9.255963e+061 result=40 17:14:47 Get A/D value=-858993460 result=40 17:14:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:14:47 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:14:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:14:47 Aux= 17:14:47 Message to Camera, serial 15441 queued 17:15:18 Received message from Master: op=PointingHead serial=15448 17:15:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:15:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:15:18 Point started: ret=0 17:15:18 point_skyscan result=0 17:15:19 Check angles 17:15:19 SkyScan query 17:15:19 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.525<-23435 Statuses=0008 0009 17:15:19 Msec=0 True Az=113.01 Ze=-171.525 Az status=0008 Ze status=0009 17:15:20 Check angles 17:15:20 SkyScan query 17:15:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:15:20 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:15:20 Message to Master queued w/err=0: serial=15448 error=0 17:15:25 Received message from Master: op=Filter serial=15449 17:15:25 Color wheel filter change from 0 to 0 17:15:25 FLIGetFilterPos err=0 currentPosition=0 17:15:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:25 Filter is already there-color wheel unchanged 17:15:25 Received message from Master: op=Shutter serial=15450 17:15:25 Shutter LASER open 17:15:25 Received message from Camera: op=State serial=15452 17:15:25 GetSingleValue result=40 Value=cccccccc 17:15:25 SkyScan query 17:15:26 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:15:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:26 Parameters OK 17:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:26 Set A/D data flow result=40 17:15:26 Set A/D channel type result=40 17:15:26 Set A/D encoding result=40 17:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:26 Set channel filter=0.000000e+000 result=40 17:15:26 Config A/D Result=40 17:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:26 Get A/D filter: -9.255963e+061 result=40 17:15:26 Get A/D value=-858993460 result=40 17:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:26 Parameters OK 17:15:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:26 Set A/D data flow result=40 17:15:26 Set A/D channel type result=40 17:15:26 Set A/D encoding result=40 17:15:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:26 Set channel filter=0.000000e+000 result=40 17:15:26 Config A/D Result=40 17:15:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:26 Get A/D filter: -9.255963e+061 result=40 17:15:26 Get A/D value=-858993460 result=40 17:15:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:26 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:26 Aux= 17:15:26 Message to Camera, serial 15452 queued 17:15:28 Received message from Master: op=Shutter serial=15456 17:15:28 Shutter LASER close 17:15:29 Received message from Master: op=PointingHead serial=15460 17:15:29 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:15:29 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:15:30 Point started: ret=0 17:15:30 point_skyscan result=0 17:15:30 Check angles 17:15:30 SkyScan query 17:15:31 SkyScan query done: ret=0 az=136.02<-9068 ze=-143.115<-21541 Statuses=0009 0009 17:15:31 Msec=0 True Az=136.02 Ze=-143.115 Az status=0009 Ze status=0009 17:15:31 Check angles 17:15:31 SkyScan query 17:15:32 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.16<-20144 Statuses=0009 0009 17:15:32 Msec=750 True Az=153.66 Ze=-122.16 Az status=0009 Ze status=0009 17:15:32 Check angles 17:15:32 SkyScan query 17:15:32 SkyScan query done: ret=0 az=170.985<-11399 ze=-101.19<-18746 Statuses=0009 0009 17:15:32 Msec=1500 True Az=170.985 Ze=-101.19 Az status=0009 Ze status=0009 17:15:33 Check angles 17:15:33 SkyScan query 17:15:33 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.83<-17322 Statuses=0008 0009 17:15:33 Msec=2250 True Az=176.025 Ze=-79.83 Az status=0008 Ze status=0009 17:15:33 Check angles 17:15:33 SkyScan query 17:15:34 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.89<-15926 Statuses=0008 0009 17:15:34 Msec=3000 True Az=175.995 Ze=-58.89 Az status=0008 Ze status=0009 17:15:34 Check angles 17:15:34 SkyScan query 17:15:35 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:15:35 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:15:35 Message to Master queued w/err=0: serial=15460 error=0 17:15:40 Received message from Master: op=Filter serial=15461 17:15:40 Color wheel filter change from 0 to 0 17:15:40 FLIGetFilterPos err=0 currentPosition=0 17:15:40 FLIGetStepsRemaining err=0 RemainingSteps=0 17:15:40 Filter is already there-color wheel unchanged 17:15:40 Received message from Master: op=Shutter serial=15462 17:15:40 Shutter LASER close 17:15:40 Received message from Camera: op=State serial=15464 17:15:40 GetSingleValue result=40 Value=cccccccc 17:15:40 SkyScan query 17:15:41 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:15:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:41 Parameters OK 17:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:41 Set A/D data flow result=40 17:15:41 Set A/D channel type result=40 17:15:41 Set A/D encoding result=40 17:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:41 Set channel filter=0.000000e+000 result=40 17:15:41 Config A/D Result=40 17:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:41 Get A/D filter: -9.255963e+061 result=40 17:15:41 Get A/D value=-858993460 result=40 17:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:15:41 Parameters OK 17:15:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:15:41 Set A/D data flow result=40 17:15:41 Set A/D channel type result=40 17:15:41 Set A/D encoding result=40 17:15:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:15:41 Set channel filter=0.000000e+000 result=40 17:15:41 Config A/D Result=40 17:15:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:15:41 Get A/D filter: -9.255963e+061 result=40 17:15:41 Get A/D value=-858993460 result=40 17:15:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:15:41 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:15:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:15:41 Aux= 17:15:41 Message to Camera, serial 15464 queued 17:16:11 Received message from Master: op=PointingHead serial=15471 17:16:11 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:16:11 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:16:12 Point started: ret=0 17:16:12 point_skyscan result=0 17:16:12 Check angles 17:16:12 SkyScan query 17:16:13 SkyScan query done: ret=0 az=153.225<-10215 ze=-22.035<-13469 Statuses=0009 0009 17:16:13 Msec=0 True Az=153.225 Ze=-22.035 Az status=0009 Ze status=0009 17:16:13 Check angles 17:16:13 SkyScan query 17:16:14 SkyScan query done: ret=0 az=135.78<-9052 ze=-1.065<-12071 Statuses=0009 0009 17:16:14 Msec=750 True Az=135.78 Ze=-1.065 Az status=0009 Ze status=0009 17:16:14 Check angles 17:16:14 SkyScan query 17:16:15 SkyScan query done: ret=0 az=118.2<-7880 ze=19.89<-10674 Statuses=0009 0009 17:16:15 Msec=1500 True Az=118.2 Ze=19.89 Az status=0009 Ze status=0009 17:16:15 Check angles 17:16:15 SkyScan query 17:16:15 SkyScan query done: ret=0 az=100.83<-6722 ze=40.845<-9277 Statuses=0009 0009 17:16:15 Msec=2250 True Az=100.83 Ze=40.845 Az status=0009 Ze status=0009 17:16:16 Check angles 17:16:16 SkyScan query 17:16:16 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 17:16:16 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 17:16:16 Check angles 17:16:16 SkyScan query 17:16:17 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:16:17 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:16:17 Message to Master queued w/err=0: serial=15471 error=0 17:16:22 Received message from Master: op=Filter serial=15472 17:16:22 Color wheel filter change from 0 to 0 17:16:22 FLIGetFilterPos err=0 currentPosition=0 17:16:22 FLIGetStepsRemaining err=0 RemainingSteps=0 17:16:22 Filter is already there-color wheel unchanged 17:16:22 Received message from Master: op=Shutter serial=15473 17:16:22 Shutter LASER close 17:16:22 Received message from Camera: op=State serial=15475 17:16:22 GetSingleValue result=40 Value=cccccccc 17:16:22 SkyScan query 17:16:23 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:16:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:23 Parameters OK 17:16:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:23 Set A/D data flow result=40 17:16:23 Set A/D channel type result=40 17:16:23 Set A/D encoding result=40 17:16:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:23 Set channel filter=0.000000e+000 result=40 17:16:23 Config A/D Result=40 17:16:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:23 Get A/D filter: -9.255963e+061 result=40 17:16:23 Get A/D value=-858993460 result=40 17:16:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:16:23 Parameters OK 17:16:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:16:23 Set A/D data flow result=40 17:16:23 Set A/D channel type result=40 17:16:23 Set A/D encoding result=40 17:16:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:16:23 Set channel filter=0.000000e+000 result=40 17:16:23 Config A/D Result=40 17:16:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:16:23 Get A/D filter: -9.255963e+061 result=40 17:16:23 Get A/D value=-858993460 result=40 17:16:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:16:23 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:16:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:16:23 Aux= 17:16:23 Message to Camera, serial 15475 queued 17:16:53 Received message from Master: op=PointingHead serial=15482 17:16:53 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:16:53 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:16:54 Point started: ret=0 17:16:54 point_skyscan result=0 17:16:55 Check angles 17:16:55 SkyScan query 17:16:55 SkyScan query done: ret=0 az=109.02<-7268 ze=38.49<-9434 Statuses=0009 0008 17:16:55 Msec=0 True Az=109.02 Ze=38.49 Az status=0009 Ze status=0008 17:16:55 Check angles 17:16:55 SkyScan query 17:16:56 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 17:16:56 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 17:16:56 Check angles 17:16:56 SkyScan query 17:16:57 SkyScan query done: ret=0 az=143.955<-9597 ze=38.505<-9433 Statuses=0009 0008 17:16:57 Msec=1500 True Az=143.955 Ze=38.505 Az status=0009 Ze status=0008 17:16:57 Check angles 17:16:57 SkyScan query 17:16:57 SkyScan query done: ret=0 az=161.415<-10761 ze=38.505<-9433 Statuses=0009 0008 17:16:57 Msec=2250 True Az=161.415 Ze=38.505 Az status=0009 Ze status=0008 17:16:58 Check angles 17:16:58 SkyScan query 17:16:58 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 17:16:58 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 17:16:58 Check angles 17:16:58 SkyScan query 17:16:59 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:16:59 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:16:59 Message to Master queued w/err=0: serial=15482 error=0 17:17:04 Received message from Master: op=Filter serial=15483 17:17:04 Color wheel filter change from 0 to 0 17:17:04 FLIGetFilterPos err=0 currentPosition=0 17:17:04 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:04 Filter is already there-color wheel unchanged 17:17:04 Received message from Master: op=Shutter serial=15484 17:17:04 Shutter LASER close 17:17:04 Received message from Camera: op=State serial=15486 17:17:04 GetSingleValue result=40 Value=cccccccc 17:17:04 SkyScan query 17:17:05 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:17:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:05 Parameters OK 17:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:05 Set A/D data flow result=40 17:17:05 Set A/D channel type result=40 17:17:05 Set A/D encoding result=40 17:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:05 Set channel filter=0.000000e+000 result=40 17:17:05 Config A/D Result=40 17:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:05 Get A/D filter: -9.255963e+061 result=40 17:17:05 Get A/D value=-858993460 result=40 17:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:05 Parameters OK 17:17:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:05 Set A/D data flow result=40 17:17:05 Set A/D channel type result=40 17:17:05 Set A/D encoding result=40 17:17:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:05 Set channel filter=0.000000e+000 result=40 17:17:05 Config A/D Result=40 17:17:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:05 Get A/D filter: -9.255963e+061 result=40 17:17:05 Get A/D value=-858993460 result=40 17:17:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:05 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:05 Aux= 17:17:05 Message to Camera, serial 15486 queued 17:17:36 Received message from Master: op=PointingHead serial=15493 17:17:36 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 17:17:36 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 17:17:36 Point started: ret=0 17:17:36 point_skyscan result=0 17:17:37 Check angles 17:17:37 SkyScan query 17:17:37 SkyScan query done: ret=0 az=153.225<-10215 ze=8.865<-11409 Statuses=0009 0009 17:17:37 Msec=0 True Az=153.225 Ze=8.865 Az status=0009 Ze status=0009 17:17:37 Check angles 17:17:37 SkyScan query 17:17:38 SkyScan query done: ret=0 az=135.81<-9054 ze=-12.075<-12805 Statuses=0009 0009 17:17:38 Msec=750 True Az=135.81 Ze=-12.075 Az status=0009 Ze status=0009 17:17:38 Check angles 17:17:38 SkyScan query 17:17:39 SkyScan query done: ret=0 az=117.795<-7853 ze=-33.42<-14228 Statuses=0009 0009 17:17:39 Msec=1500 True Az=117.795 Ze=-33.42 Az status=0009 Ze status=0009 17:17:39 Check angles 17:17:39 SkyScan query 17:17:39 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 17:17:39 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 17:17:40 Check angles 17:17:40 SkyScan query 17:17:40 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 17:17:40 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 17:17:40 Check angles 17:17:40 SkyScan query 17:17:41 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 17:17:41 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 17:17:41 Message to Master queued w/err=0: serial=15493 error=0 17:17:46 Received message from Master: op=Filter serial=15494 17:17:46 Color wheel filter change from 0 to 0 17:17:46 FLIGetFilterPos err=0 currentPosition=0 17:17:46 FLIGetStepsRemaining err=0 RemainingSteps=0 17:17:46 Filter is already there-color wheel unchanged 17:17:46 Received message from Master: op=Shutter serial=15495 17:17:46 Shutter LASER close 17:17:46 Received message from Camera: op=State serial=15497 17:17:46 GetSingleValue result=40 Value=cccccccc 17:17:46 SkyScan query 17:17:47 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 17:17:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:47 Parameters OK 17:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:47 Set A/D data flow result=40 17:17:47 Set A/D channel type result=40 17:17:47 Set A/D encoding result=40 17:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:47 Set channel filter=0.000000e+000 result=40 17:17:47 Config A/D Result=40 17:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:47 Get A/D filter: -9.255963e+061 result=40 17:17:47 Get A/D value=-858993460 result=40 17:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:17:47 Parameters OK 17:17:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:17:47 Set A/D data flow result=40 17:17:47 Set A/D channel type result=40 17:17:47 Set A/D encoding result=40 17:17:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:17:47 Set channel filter=0.000000e+000 result=40 17:17:47 Config A/D Result=40 17:17:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:17:47 Get A/D filter: -9.255963e+061 result=40 17:17:47 Get A/D value=-858993460 result=40 17:17:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:17:47 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:17:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:17:47 Aux= 17:17:47 Message to Camera, serial 15497 queued 17:18:18 Received message from Master: op=PointingHead serial=15504 17:18:18 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:18:18 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:18:18 Point started: ret=0 17:18:18 point_skyscan result=0 17:18:19 Check angles 17:18:19 SkyScan query 17:18:19 SkyScan query done: ret=0 az=109.02<-7268 ze=-81.375<-17425 Statuses=0009 0009 17:18:19 Msec=0 True Az=109.02 Ze=-81.375 Az status=0009 Ze status=0009 17:18:19 Check angles 17:18:19 SkyScan query 17:18:20 SkyScan query done: ret=0 az=112.995<-7533 ze=-102.345<-18823 Statuses=0008 0009 17:18:20 Msec=750 True Az=112.995 Ze=-102.345 Az status=0008 Ze status=0009 17:18:20 Check angles 17:18:20 SkyScan query 17:18:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.285<-20219 Statuses=0008 0009 17:18:21 Msec=1500 True Az=112.995 Ze=-123.285 Az status=0008 Ze status=0009 17:18:21 Check angles 17:18:21 SkyScan query 17:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.66<-21644 Statuses=0008 0009 17:18:22 Msec=2250 True Az=112.995 Ze=-144.66 Az status=0008 Ze status=0009 17:18:22 Check angles 17:18:22 SkyScan query 17:18:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.6<-23040 Statuses=0008 0009 17:18:22 Msec=3000 True Az=112.995 Ze=-165.6 Az status=0008 Ze status=0009 17:18:22 Check angles 17:18:22 SkyScan query 17:18:23 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 17:18:23 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 17:18:23 Message to Master queued w/err=0: serial=15504 error=0 17:18:28 Received message from Master: op=Filter serial=15505 17:18:28 Color wheel filter change from 0 to 0 17:18:28 FLIGetFilterPos err=0 currentPosition=0 17:18:28 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:28 Filter is already there-color wheel unchanged 17:18:28 Received message from Master: op=Shutter serial=15506 17:18:28 Shutter LASER open 17:18:28 Received message from Camera: op=State serial=15508 17:18:28 GetSingleValue result=40 Value=cccccccc 17:18:28 SkyScan query 17:18:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:18:29 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:29 Parameters OK 17:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:29 Set A/D data flow result=40 17:18:29 Set A/D channel type result=40 17:18:29 Set A/D encoding result=40 17:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:29 Set channel filter=0.000000e+000 result=40 17:18:29 Config A/D Result=40 17:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:29 Get A/D filter: -9.255963e+061 result=40 17:18:29 Get A/D value=-858993460 result=40 17:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:29 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:29 Parameters OK 17:18:29 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:29 Set A/D data flow result=40 17:18:29 Set A/D channel type result=40 17:18:29 Set A/D encoding result=40 17:18:29 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:29 Set channel filter=0.000000e+000 result=40 17:18:29 Config A/D Result=40 17:18:29 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:29 Get A/D filter: -9.255963e+061 result=40 17:18:29 Get A/D value=-858993460 result=40 17:18:29 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:29 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:29 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:29 Aux= 17:18:29 Message to Camera, serial 15508 queued 17:18:31 Received message from Master: op=Shutter serial=15512 17:18:31 Shutter LASER close 17:18:32 Received message from Master: op=PointingHead serial=15516 17:18:32 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 17:18:32 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 17:18:32 Point started: ret=0 17:18:32 point_skyscan result=0 17:18:33 Check angles 17:18:33 SkyScan query 17:18:34 SkyScan query done: ret=0 az=89.85<-5990 ze=157.23<-1518 Statuses=0009 0009 17:18:34 Msec=0 True Az=89.85 Ze=157.23 Az status=0009 Ze status=0009 17:18:34 Check angles 17:18:34 SkyScan query 17:18:34 SkyScan query done: ret=0 az=72.36<-4824 ze=136.26<-2916 Statuses=0009 0009 17:18:34 Msec=750 True Az=72.36 Ze=136.26 Az status=0009 Ze status=0009 17:18:34 Check angles 17:18:34 SkyScan query 17:18:35 SkyScan query done: ret=0 az=54.945<-3663 ze=115.305<-4313 Statuses=0009 0009 17:18:35 Msec=1500 True Az=54.945 Ze=115.305 Az status=0009 Ze status=0009 17:18:35 Check angles 17:18:35 SkyScan query 17:18:36 SkyScan query done: ret=0 az=40.845<-2723 ze=94.335<-5711 Statuses=0009 0009 17:18:36 Msec=2250 True Az=40.845 Ze=94.335 Az status=0009 Ze status=0009 17:18:36 Check angles 17:18:36 SkyScan query 17:18:37 SkyScan query done: ret=0 az=40.995<-2733 ze=73.38<-7108 Statuses=0008 0009 17:18:37 Msec=3000 True Az=40.995 Ze=73.38 Az status=0008 Ze status=0009 17:18:37 Check angles 17:18:37 SkyScan query 17:18:37 SkyScan query done: ret=0 az=40.995<-2733 ze=52.83<-8478 Statuses=0008 0009 17:18:37 Msec=3750 True Az=40.995 Ze=52.83 Az status=0008 Ze status=0009 17:18:37 Check angles 17:18:37 SkyScan query 17:18:38 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 17:18:38 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 17:18:38 Message to Master queued w/err=0: serial=15516 error=0 17:18:43 Received message from Master: op=Filter serial=15517 17:18:43 Color wheel filter change from 0 to 0 17:18:43 FLIGetFilterPos err=0 currentPosition=0 17:18:43 FLIGetStepsRemaining err=0 RemainingSteps=0 17:18:43 Filter is already there-color wheel unchanged 17:18:43 Received message from Master: op=Shutter serial=15518 17:18:43 Shutter LASER close 17:18:43 Received message from Camera: op=State serial=15520 17:18:43 GetSingleValue result=40 Value=cccccccc 17:18:43 SkyScan query 17:18:44 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 17:18:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:44 Parameters OK 17:18:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:44 Set A/D data flow result=40 17:18:44 Set A/D channel type result=40 17:18:44 Set A/D encoding result=40 17:18:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:44 Set channel filter=0.000000e+000 result=40 17:18:44 Config A/D Result=40 17:18:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:44 Get A/D filter: -9.255963e+061 result=40 17:18:44 Get A/D value=-858993460 result=40 17:18:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:18:44 Parameters OK 17:18:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:18:44 Set A/D data flow result=40 17:18:44 Set A/D channel type result=40 17:18:44 Set A/D encoding result=40 17:18:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:18:44 Set channel filter=0.000000e+000 result=40 17:18:44 Config A/D Result=40 17:18:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:18:44 Get A/D filter: -9.255963e+061 result=40 17:18:44 Get A/D value=-858993460 result=40 17:18:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:18:44 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:18:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:18:44 Aux= 17:18:44 Message to Camera, serial 15520 queued 17:19:15 Received message from Master: op=PointingHead serial=15527 17:19:15 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 17:19:15 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 17:19:15 Point started: ret=0 17:19:15 point_skyscan result=0 17:19:16 Check angles 17:19:16 SkyScan query 17:19:17 SkyScan query done: ret=0 az=40.995<-2733 ze=21.645<-10557 Statuses=0008 0009 17:19:17 Msec=0 True Az=40.995 Ze=21.645 Az status=0008 Ze status=0009 17:19:17 Check angles 17:19:17 SkyScan query 17:19:17 SkyScan query done: ret=0 az=40.995<-2733 ze=0.675<-11955 Statuses=0008 0009 17:19:17 Msec=750 True Az=40.995 Ze=0.675 Az status=0008 Ze status=0009 17:19:18 Check angles 17:19:18 SkyScan query 17:19:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-20.28<-13352 Statuses=0008 0009 17:19:18 Msec=1500 True Az=40.995 Ze=-20.28 Az status=0008 Ze status=0009 17:19:18 Check angles 17:19:18 SkyScan query 17:19:19 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0009 17:19:19 Msec=2250 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0009 17:19:19 Check angles 17:19:19 SkyScan query 17:19:20 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.55<-14570 Statuses=0008 0008 17:19:20 Msec=3000 True Az=40.995 Ze=-38.55 Az status=0008 Ze status=0008 17:19:20 Message to Master queued w/err=0: serial=15527 error=0 17:19:25 Received message from Master: op=Filter serial=15528 17:19:25 Color wheel filter change from 0 to 0 17:19:25 FLIGetFilterPos err=0 currentPosition=0 17:19:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:19:25 Filter is already there-color wheel unchanged 17:19:25 Received message from Master: op=Shutter serial=15529 17:19:25 Shutter LASER close 17:19:25 Received message from Camera: op=State serial=15531 17:19:25 GetSingleValue result=40 Value=cccccccc 17:19:25 SkyScan query 17:19:25 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 17:19:25 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:25 Parameters OK 17:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:25 Set A/D data flow result=40 17:19:25 Set A/D channel type result=40 17:19:25 Set A/D encoding result=40 17:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:25 Set channel filter=0.000000e+000 result=40 17:19:25 Config A/D Result=40 17:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:25 Get A/D filter: -9.255963e+061 result=40 17:19:25 Get A/D value=-858993460 result=40 17:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:25 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:19:25 Parameters OK 17:19:25 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:19:25 Set A/D data flow result=40 17:19:25 Set A/D channel type result=40 17:19:25 Set A/D encoding result=40 17:19:25 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:19:25 Set channel filter=0.000000e+000 result=40 17:19:25 Config A/D Result=40 17:19:25 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:19:25 Get A/D filter: -9.255963e+061 result=40 17:19:25 Get A/D value=-858993460 result=40 17:19:25 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:19:25 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:19:25 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:19:25 Aux= 17:19:25 Message to Camera, serial 15531 queued 17:19:56 Received message from Master: op=PointingHead serial=15538 17:19:56 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 17:19:56 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 17:19:57 Point started: ret=0 17:19:57 point_skyscan result=0 17:19:57 Check angles 17:19:57 SkyScan query 17:19:58 SkyScan query done: ret=0 az=64.38<-4292 ze=-68.79<-16586 Statuses=0009 0009 17:19:58 Msec=0 True Az=64.38 Ze=-68.79 Az status=0009 Ze status=0009 17:19:58 Check angles 17:19:58 SkyScan query 17:19:59 SkyScan query done: ret=0 az=82.08<-5472 ze=-89.76<-17984 Statuses=0009 0009 17:19:59 Msec=750 True Az=82.08 Ze=-89.76 Az status=0009 Ze status=0009 17:19:59 Check angles 17:19:59 SkyScan query 17:20:00 SkyScan query done: ret=0 az=99.825<-6655 ze=-111.15<-19410 Statuses=0009 0009 17:20:00 Msec=1500 True Az=99.825 Ze=-111.15 Az status=0009 Ze status=0009 17:20:00 Check angles 17:20:00 SkyScan query 17:20:00 SkyScan query done: ret=0 az=117.6<-7840 ze=-132.525<-20835 Statuses=0009 0009 17:20:00 Msec=2250 True Az=117.6 Ze=-132.525 Az status=0009 Ze status=0009 17:20:00 Check angles 17:20:00 SkyScan query 17:20:01 SkyScan query done: ret=0 az=131.055<-8737 ze=-141.54<-21436 Statuses=0009 0008 17:20:01 Msec=3000 True Az=131.055 Ze=-141.54 Az status=0009 Ze status=0008 17:20:01 Check angles 17:20:01 SkyScan query 17:20:02 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 17:20:02 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 17:20:02 Message to Master queued w/err=0: serial=15538 error=0 17:20:07 Received message from Master: op=Filter serial=15539 17:20:07 Color wheel filter change from 0 to 0 17:20:07 FLIGetFilterPos err=0 currentPosition=0 17:20:07 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:07 Filter is already there-color wheel unchanged 17:20:07 Received message from Master: op=Shutter serial=15540 17:20:07 Shutter LASER close 17:20:07 Received message from Camera: op=State serial=15542 17:20:07 GetSingleValue result=40 Value=cccccccc 17:20:07 SkyScan query 17:20:08 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 17:20:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:08 Parameters OK 17:20:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:08 Set A/D data flow result=40 17:20:08 Set A/D channel type result=40 17:20:08 Set A/D encoding result=40 17:20:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:08 Set channel filter=0.000000e+000 result=40 17:20:08 Config A/D Result=40 17:20:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:08 Get A/D filter: -9.255963e+061 result=40 17:20:08 Get A/D value=-858993460 result=40 17:20:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:08 Parameters OK 17:20:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:08 Set A/D data flow result=40 17:20:08 Set A/D channel type result=40 17:20:08 Set A/D encoding result=40 17:20:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:08 Set channel filter=0.000000e+000 result=40 17:20:08 Config A/D Result=40 17:20:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:08 Get A/D filter: -9.255963e+061 result=40 17:20:08 Get A/D value=-858993460 result=40 17:20:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:08 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:08 Aux= 17:20:08 Message to Camera, serial 15542 queued 17:20:38 Received message from Master: op=PointingHead serial=15549 17:20:38 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:20:38 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:20:39 Point started: ret=0 17:20:39 point_skyscan result=0 17:20:40 Check angles 17:20:40 SkyScan query 17:20:40 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.225<-23415 Statuses=0009 0009 17:20:40 Msec=0 True Az=113.01 Ze=-171.225 Az status=0009 Ze status=0009 17:20:40 Check angles 17:20:40 SkyScan query 17:20:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 17:20:41 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 17:20:41 Message to Master queued w/err=0: serial=15549 error=0 17:20:46 Received message from Master: op=Filter serial=15550 [UTC 2018-12-4 17:20:46] 17:20:46 Color wheel filter change from 0 to 0 17:20:46 FLIGetFilterPos err=0 currentPosition=0 17:20:46 FLIGetStepsRemaining err=0 RemainingSteps=0 17:20:46 Filter is already there-color wheel unchanged 17:20:46 Received message from Master: op=Shutter serial=15551 17:20:46 Shutter LASER open 17:20:46 Received message from Camera: op=State serial=15553 17:20:46 GetSingleValue result=40 Value=cccccccc 17:20:46 SkyScan query 17:20:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:20:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:47 Parameters OK 17:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:47 Set A/D data flow result=40 17:20:47 Set A/D channel type result=40 17:20:47 Set A/D encoding result=40 17:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:47 Set channel filter=0.000000e+000 result=40 17:20:47 Config A/D Result=40 17:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:47 Get A/D filter: -9.255963e+061 result=40 17:20:47 Get A/D value=-858993460 result=40 17:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:20:47 Parameters OK 17:20:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:20:47 Set A/D data flow result=40 17:20:47 Set A/D channel type result=40 17:20:47 Set A/D encoding result=40 17:20:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:20:47 Set channel filter=0.000000e+000 result=40 17:20:47 Config A/D Result=40 17:20:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:20:47 Get A/D filter: -9.255963e+061 result=40 17:20:47 Get A/D value=-858993460 result=40 17:20:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:20:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:20:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:20:47 Aux= 17:20:47 Message to Camera, serial 15553 queued 17:20:49 Received message from Master: op=Shutter serial=15557 17:20:49 Shutter LASER close 17:20:50 Received message from Master: op=PointingHead serial=15561 17:20:50 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 17:20:50 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 17:20:50 Point started: ret=0 17:20:50 point_skyscan result=0 17:20:51 Check angles 17:20:51 SkyScan query 17:20:52 SkyScan query done: ret=0 az=135.9<-9060 ze=-143.265<-21551 Statuses=0009 0009 17:20:52 Msec=0 True Az=135.9 Ze=-143.265 Az status=0009 Ze status=0009 17:20:52 Check angles 17:20:52 SkyScan query 17:20:52 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.31<-20154 Statuses=0009 0009 17:20:52 Msec=750 True Az=153.435 Ze=-122.31 Az status=0009 Ze status=0009 17:20:53 Check angles 17:20:53 SkyScan query 17:20:53 SkyScan query done: ret=0 az=170.835<-11389 ze=-101.4<-18760 Statuses=0009 0009 17:20:53 Msec=1500 True Az=170.835 Ze=-101.4 Az status=0009 Ze status=0009 17:20:53 Check angles 17:20:53 SkyScan query 17:20:54 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.4<-17360 Statuses=0008 0009 17:20:54 Msec=2250 True Az=176.025 Ze=-80.4 Az status=0008 Ze status=0009 17:20:54 Check angles 17:20:54 SkyScan query 17:20:55 SkyScan query done: ret=0 az=176.01<-11734 ze=-59.475<-15965 Statuses=0008 0009 17:20:55 Msec=3000 True Az=176.01 Ze=-59.475 Az status=0008 Ze status=0009 17:20:55 Check angles 17:20:55 SkyScan query 17:20:55 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 17:20:55 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 17:20:55 Message to Master queued w/err=0: serial=15561 error=0 17:21:00 Received message from Master: op=Filter serial=15562 17:21:00 Color wheel filter change from 0 to 0 17:21:00 FLIGetFilterPos err=0 currentPosition=0 17:21:00 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:00 Filter is already there-color wheel unchanged 17:21:01 Received message from Master: op=Shutter serial=15563 17:21:01 Shutter LASER close 17:21:01 Received message from Camera: op=State serial=15565 17:21:01 GetSingleValue result=40 Value=cccccccc 17:21:01 SkyScan query 17:21:01 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 17:21:01 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:01 Parameters OK 17:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:01 Set A/D data flow result=40 17:21:01 Set A/D channel type result=40 17:21:01 Set A/D encoding result=40 17:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:01 Set channel filter=0.000000e+000 result=40 17:21:01 Config A/D Result=40 17:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:01 Get A/D filter: -9.255963e+061 result=40 17:21:01 Get A/D value=-858993460 result=40 17:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:01 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:01 Parameters OK 17:21:01 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:01 Set A/D data flow result=40 17:21:01 Set A/D channel type result=40 17:21:01 Set A/D encoding result=40 17:21:01 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:01 Set channel filter=0.000000e+000 result=40 17:21:01 Config A/D Result=40 17:21:01 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:01 Get A/D filter: -9.255963e+061 result=40 17:21:01 Get A/D value=-858993460 result=40 17:21:01 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:01 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:01 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:01 Aux= 17:21:01 Message to Camera, serial 15565 queued 17:21:32 Received message from Master: op=PointingHead serial=15572 17:21:32 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 17:21:32 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 17:21:33 Point started: ret=0 17:21:33 point_skyscan result=0 17:21:33 Check angles 17:21:33 SkyScan query 17:21:34 SkyScan query done: ret=0 az=152.94<-10196 ze=-21.645<-13443 Statuses=0009 0009 17:21:34 Msec=0 True Az=152.94 Ze=-21.645 Az status=0009 Ze status=0009 17:21:34 Check angles 17:21:34 SkyScan query 17:21:35 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.645<-12043 Statuses=0009 0009 17:21:35 Msec=750 True Az=135.42 Ze=-0.645 Az status=0009 Ze status=0009 17:21:35 Check angles 17:21:35 SkyScan query 17:21:35 SkyScan query done: ret=0 az=117.54<-7836 ze=20.7<-10620 Statuses=0009 0009 17:21:35 Msec=1500 True Az=117.54 Ze=20.7 Az status=0009 Ze status=0009 17:21:36 Check angles 17:21:36 SkyScan query 17:21:36 SkyScan query done: ret=0 az=99.735<-6649 ze=42.12<-9192 Statuses=0009 0009 17:21:36 Msec=2250 True Az=99.735 Ze=42.12 Az status=0009 Ze status=0009 17:21:36 Check angles 17:21:36 SkyScan query 17:21:37 SkyScan query done: ret=0 az=85.995<-5733 ze=51.555<-8563 Statuses=0009 0008 17:21:37 Msec=3000 True Az=85.995 Ze=51.555 Az status=0009 Ze status=0008 17:21:37 Check angles 17:21:37 SkyScan query 17:21:38 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 17:21:38 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 17:21:38 Message to Master queued w/err=0: serial=15572 error=0 17:21:43 Received message from Master: op=Filter serial=15573 17:21:43 Color wheel filter change from 0 to 0 17:21:43 FLIGetFilterPos err=0 currentPosition=0 17:21:43 FLIGetStepsRemaining err=0 RemainingSteps=0 17:21:43 Filter is already there-color wheel unchanged 17:21:43 Received message from Master: op=Shutter serial=15574 17:21:43 Shutter LASER close 17:21:43 Received message from Camera: op=State serial=15576 17:21:43 GetSingleValue result=40 Value=cccccccc 17:21:43 SkyScan query 17:21:43 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 17:21:43 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:43 Parameters OK 17:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:43 Set A/D data flow result=40 17:21:43 Set A/D channel type result=40 17:21:43 Set A/D encoding result=40 17:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:43 Set channel filter=0.000000e+000 result=40 17:21:43 Config A/D Result=40 17:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:43 Get A/D filter: -9.255963e+061 result=40 17:21:43 Get A/D value=-858993460 result=40 17:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:43 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:21:43 Parameters OK 17:21:43 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:21:43 Set A/D data flow result=40 17:21:43 Set A/D channel type result=40 17:21:43 Set A/D encoding result=40 17:21:43 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:21:43 Set channel filter=0.000000e+000 result=40 17:21:43 Config A/D Result=40 17:21:43 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:21:43 Get A/D filter: -9.255963e+061 result=40 17:21:43 Get A/D value=-858993460 result=40 17:21:43 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:21:43 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:21:43 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:21:43 Aux= 17:21:43 Message to Camera, serial 15576 queued 17:21:49 Received message from Master: op=Identify serial=15577 17:22:14 Received message from Master: op=PointingHead serial=15586 17:22:14 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 17:22:14 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 17:22:15 Point started: ret=0 17:22:15 point_skyscan result=0 17:22:15 Check angles 17:22:15 SkyScan query 17:22:16 SkyScan query done: ret=0 az=109.2<-7280 ze=38.49<-9434 Statuses=0009 0008 17:22:16 Msec=0 True Az=109.2 Ze=38.49 Az status=0009 Ze status=0008 17:22:16 Check angles 17:22:16 SkyScan query 17:22:17 SkyScan query done: ret=0 az=126.63<-8442 ze=38.505<-9433 Statuses=0009 0008 17:22:17 Msec=750 True Az=126.63 Ze=38.505 Az status=0009 Ze status=0008 17:22:17 Check angles 17:22:17 SkyScan query 17:22:17 SkyScan query done: ret=0 az=144.435<-9629 ze=38.505<-9433 Statuses=0009 0008 17:22:17 Msec=1500 True Az=144.435 Ze=38.505 Az status=0009 Ze status=0008 17:22:18 Check angles 17:22:18 SkyScan query 17:22:18 SkyScan query done: ret=0 az=161.97<-10798 ze=38.505<-9433 Statuses=0009 0008 17:22:18 Msec=2250 True Az=161.97 Ze=38.505 Az status=0009 Ze status=0008 17:22:18 Check angles 17:22:18 SkyScan query 17:22:19 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 17:22:19 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 17:22:19 Check angles 17:22:19 SkyScan query 17:22:20 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 17:22:20 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 17:22:20 Message to Master queued w/err=0: serial=15586 error=0 17:22:25 Received message from Master: op=Filter serial=15587 17:22:25 Color wheel filter change from 0 to 0 17:22:25 FLIGetFilterPos err=0 currentPosition=0 17:22:25 FLIGetStepsRemaining err=0 RemainingSteps=0 17:22:25 Filter is already there-color wheel unchanged 17:22:25 Received message from Master: op=Shutter serial=15588 17:22:25 Shutter LASER close 17:22:25 Received message from Camera: op=State serial=15590 17:22:25 GetSingleValue result=40 Value=cccccccc 17:22:25 SkyScan query 17:22:26 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 17:22:26 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:26 Parameters OK 17:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:26 Set A/D data flow result=40 17:22:26 Set A/D channel type result=40 17:22:26 Set A/D encoding result=40 17:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:26 Set channel filter=0.000000e+000 result=40 17:22:26 Config A/D Result=40 17:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:26 Get A/D filter: -9.255963e+061 result=40 17:22:26 Get A/D value=-858993460 result=40 17:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:26 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:22:26 Parameters OK 17:22:26 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:22:26 Set A/D data flow result=40 17:22:26 Set A/D channel type result=40 17:22:26 Set A/D encoding result=40 17:22:26 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:22:26 Set channel filter=0.000000e+000 result=40 17:22:26 Config A/D Result=40 17:22:26 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:22:26 Get A/D filter: -9.255963e+061 result=40 17:22:26 Get A/D value=-858993460 result=40 17:22:26 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:22:26 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:22:26 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:22:26 Aux= 17:22:26 Message to Camera, serial 15590 queued 17:22:57 Received message from Master: op=PointingHead serial=15597 17:22:57 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:22:57 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:22:58 Point started: ret=0 17:22:58 point_skyscan result=0 17:22:59 Check angles 17:22:59 SkyScan query 17:22:59 SkyScan query done: ret=0 az=152.61<-10174 ze=68.82<-7412 Statuses=0009 0009 17:22:59 Msec=0 True Az=152.61 Ze=68.82 Az status=0009 Ze status=0009 17:22:59 Check angles 17:22:59 SkyScan query 17:23:00 SkyScan query done: ret=0 az=135.18<-9012 ze=89.82<-6012 Statuses=0009 0009 17:23:00 Msec=750 True Az=135.18 Ze=89.82 Az status=0009 Ze status=0009 17:23:00 Check angles 17:23:00 SkyScan query 17:23:01 SkyScan query done: ret=0 az=117.555<-7837 ze=110.73<-4618 Statuses=0009 0009 17:23:01 Msec=1500 True Az=117.555 Ze=110.73 Az status=0009 Ze status=0009 17:23:01 Check angles 17:23:01 SkyScan query 17:23:01 SkyScan query done: ret=0 az=112.995<-7533 ze=131.7<-3220 Statuses=0008 0009 17:23:01 Msec=2250 True Az=112.995 Ze=131.7 Az status=0008 Ze status=0009 17:23:02 Check angles 17:23:02 SkyScan query 17:23:02 SkyScan query done: ret=0 az=112.995<-7533 ze=152.625<-1825 Statuses=0008 0009 17:23:02 Msec=3000 True Az=112.995 Ze=152.625 Az status=0008 Ze status=0009 17:23:02 Check angles 17:23:02 SkyScan query 17:23:03 SkyScan query done: ret=0 az=112.995<-7533 ze=173.625<-425 Statuses=0008 0009 17:23:03 Msec=3750 True Az=112.995 Ze=173.625 Az status=0008 Ze status=0009 17:23:03 Check angles 17:23:03 SkyScan query 17:23:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.935<-23529 Statuses=0008 0008 17:23:04 Msec=4500 True Az=112.995 Ze=-172.935 Az status=0008 Ze status=0008 17:23:04 Message to Master queued w/err=0: serial=15597 error=0 17:23:09 Received message from Master: op=Filter serial=15598 17:23:09 Color wheel filter change from 0 to 2 17:23:09 FLIGetFilterPos err=0 currentPosition=0 17:23:09 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:12 FLISetFilterPos err=0 rqPosition=2 17:23:12 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:12 Check after 0.00 sec for filter wheel DIn/CWh=0 17:23:12 FLIGetFilterPos err=0 currentPosition=2 17:23:12 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:12 Received message from Master: op=Shutter serial=15599 17:23:12 Shutter LASER close 17:23:12 Received message from Camera: op=State serial=15601 17:23:12 GetSingleValue result=40 Value=cccccccc 17:23:12 SkyScan query 17:23:13 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:13 Parameters OK 17:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:13 Set A/D data flow result=40 17:23:13 Set A/D channel type result=40 17:23:13 Set A/D encoding result=40 17:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:13 Set channel filter=0.000000e+000 result=40 17:23:13 Config A/D Result=40 17:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:13 Get A/D filter: -9.255963e+061 result=40 17:23:13 Get A/D value=-858993460 result=40 17:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:13 Parameters OK 17:23:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:13 Set A/D data flow result=40 17:23:13 Set A/D channel type result=40 17:23:13 Set A/D encoding result=40 17:23:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:13 Set channel filter=0.000000e+000 result=40 17:23:13 Config A/D Result=40 17:23:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:13 Get A/D filter: -9.255963e+061 result=40 17:23:13 Get A/D value=-858993460 result=40 17:23:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:13 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:13 Aux= 17:23:13 Message to Camera, serial 15601 queued 17:23:14 Received message from Master: op=PointingHead serial=15607 17:23:14 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:23:14 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:23:14 Point started: ret=0 17:23:14 point_skyscan result=0 17:23:15 Check angles 17:23:15 SkyScan query 17:23:15 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:15 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:23:15 Message to Master queued w/err=0: serial=15607 error=0 17:23:20 Received message from Master: op=Filter serial=15608 17:23:20 Color wheel filter change from 2 to 2 17:23:20 FLIGetFilterPos err=0 currentPosition=2 17:23:20 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:20 Filter is already there-color wheel unchanged 17:23:20 Received message from Master: op=Shutter serial=15609 17:23:20 Shutter LASER close 17:23:21 Received message from Camera: op=State serial=15611 17:23:21 GetSingleValue result=40 Value=cccccccc 17:23:21 SkyScan query 17:23:21 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:21 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:21 Parameters OK 17:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:21 Set A/D data flow result=40 17:23:21 Set A/D channel type result=40 17:23:21 Set A/D encoding result=40 17:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:21 Set channel filter=0.000000e+000 result=40 17:23:21 Config A/D Result=40 17:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:21 Get A/D filter: -9.255963e+061 result=40 17:23:21 Get A/D value=-858993460 result=40 17:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:21 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:23:21 Parameters OK 17:23:21 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:23:21 Set A/D data flow result=40 17:23:21 Set A/D channel type result=40 17:23:21 Set A/D encoding result=40 17:23:21 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:23:21 Set channel filter=0.000000e+000 result=40 17:23:21 Config A/D Result=40 17:23:21 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:23:21 Get A/D filter: -9.255963e+061 result=40 17:23:21 Get A/D value=-858993460 result=40 17:23:21 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:23:21 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:23:21 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:23:21 Aux= 17:23:21 Message to Camera, serial 15611 queued 17:23:52 Received message from Master: op=PointingHead serial=15618 17:23:52 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 17:23:52 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 17:23:52 Point started: ret=0 17:23:52 point_skyscan result=0 17:23:53 Check angles 17:23:53 SkyScan query 17:23:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:23:54 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 17:23:54 Message to Master queued w/err=0: serial=15618 error=0 17:23:59 Received message from Master: op=Filter serial=15619 17:23:59 Color wheel filter change from 2 to 2 17:23:59 FLIGetFilterPos err=0 currentPosition=2 17:23:59 FLIGetStepsRemaining err=0 RemainingSteps=0 17:23:59 Filter is already there-color wheel unchanged 17:23:59 Received message from Master: op=Shutter serial=15620 17:23:59 Shutter LASER close 17:23:59 Received message from Camera: op=State serial=15622 17:23:59 GetSingleValue result=40 Value=cccccccc 17:23:59 SkyScan query 17:24:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 17:24:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:00 Parameters OK 17:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:00 Set A/D data flow result=40 17:24:00 Set A/D channel type result=40 17:24:00 Set A/D encoding result=40 17:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:00 Set channel filter=0.000000e+000 result=40 17:24:00 Config A/D Result=40 17:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:00 Get A/D filter: -9.255963e+061 result=40 17:24:00 Get A/D value=-858993460 result=40 17:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 17:24:00 Parameters OK 17:24:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 17:24:00 Set A/D data flow result=40 17:24:00 Set A/D channel type result=40 17:24:00 Set A/D encoding result=40 17:24:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 17:24:00 Set channel filter=0.000000e+000 result=40 17:24:00 Config A/D Result=40 17:24:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 17:24:00 Get A/D filter: -9.255963e+061 result=40 17:24:00 Get A/D value=-858993460 result=40 17:24:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 17:24:00 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 17:24:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 17:24:00 Aux= 17:24:00 Message to Camera, serial 15622 queued 17:24:03 Received message from Master: op=Log close serial=15631 17:24:03 Log file close 17:24:03 * END OF LOG *