[UTC 2018-12-3 17:22:28] 17:22:28 Received message from Master: op=Log open serial=17618 17:22:28 Log file open: Observatory C:\PKZPrograms\Logs\20181203 \ PKZ20181203172228_Observatory.txt 17:22:28 Previous log file: 17:22:32 Received message from Master: op=Log directory change serial=17620 17:22:32 Log file directory remains C:\PKZPrograms\Logs\20181203 17:22:32 Log file name is PKZ20181203172232_Observatory.txt [UTC 2018-12-3 17:32:09] 17:32:32 No messages received for 10 min. 6569 sent since last one of these. 17:32:32 MsgArea H: nextMessageSerial=17628 startMsgs=68 nextFree=27744 maxMsg=65468 17:32:32 MsgArea Q: Master=-1:-1 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 17:32:32 MsgArea S: 17:42:27 Received message from Master: op=Identify serial=17628 [UTC 2018-12-3 17:52:09] 17:52:27 No messages received for 10 min. 1 sent since last one of these. 17:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 17:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 17:52:27 MsgArea S: 18:02:27 No messages received for 10 min. 0 sent since last one of these. 18:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 18:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 18:02:27 MsgArea S: [UTC 2018-12-3 18:12:09] 18:12:27 No messages received for 10 min. 0 sent since last one of these. 18:12:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 18:12:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 18:12:27 MsgArea S: 18:22:27 No messages received for 10 min. 0 sent since last one of these. 18:22:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 18:22:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 18:22:27 MsgArea S: [UTC 2018-12-3 18:32:09] 18:32:27 No messages received for 10 min. 0 sent since last one of these. 18:32:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 18:32:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 18:32:27 MsgArea S: 18:42:27 No messages received for 10 min. 0 sent since last one of these. 18:42:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 18:42:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 18:42:27 MsgArea S: [UTC 2018-12-3 18:52:09] 18:52:27 No messages received for 10 min. 0 sent since last one of these. 18:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 18:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 18:52:27 MsgArea S: 19:02:27 No messages received for 10 min. 0 sent since last one of these. 19:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 19:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 19:02:27 MsgArea S: [UTC 2018-12-3 19:12:09] 19:12:27 No messages received for 10 min. 0 sent since last one of these. 19:12:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 19:12:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 19:12:27 MsgArea S: 19:22:27 No messages received for 10 min. 0 sent since last one of these. 19:22:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 19:22:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 19:22:27 MsgArea S: [UTC 2018-12-3 19:32:09] 19:32:27 No messages received for 10 min. 0 sent since last one of these. 19:32:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 19:32:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 19:32:27 MsgArea S: 19:42:27 No messages received for 10 min. 0 sent since last one of these. 19:42:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 19:42:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 19:42:27 MsgArea S: [UTC 2018-12-3 19:52:09] 19:52:27 No messages received for 10 min. 0 sent since last one of these. 19:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 19:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 19:52:27 MsgArea S: 20:02:27 No messages received for 10 min. 0 sent since last one of these. 20:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 20:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 20:02:27 MsgArea S: [UTC 2018-12-3 20:12:09] 20:12:27 No messages received for 10 min. 0 sent since last one of these. 20:12:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 20:12:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 20:12:27 MsgArea S: 20:22:27 No messages received for 10 min. 0 sent since last one of these. 20:22:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 20:22:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 20:22:27 MsgArea S: [UTC 2018-12-3 20:32:09] 20:32:27 No messages received for 10 min. 0 sent since last one of these. 20:32:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 20:32:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 20:32:27 MsgArea S: 20:42:27 No messages received for 10 min. 0 sent since last one of these. 20:42:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 20:42:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 20:42:27 MsgArea S: [UTC 2018-12-3 20:52:09] 20:52:27 No messages received for 10 min. 0 sent since last one of these. 20:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 20:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 20:52:27 MsgArea S: 21:02:27 No messages received for 10 min. 0 sent since last one of these. 21:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 21:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 21:02:27 MsgArea S: [UTC 2018-12-3 21:12:09] 21:12:27 No messages received for 10 min. 0 sent since last one of these. 21:12:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 21:12:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 21:12:27 MsgArea S: 21:22:27 No messages received for 10 min. 0 sent since last one of these. 21:22:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 21:22:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 21:22:27 MsgArea S: [UTC 2018-12-3 21:32:09] 21:32:27 No messages received for 10 min. 0 sent since last one of these. 21:32:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 21:32:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 21:32:27 MsgArea S: 21:42:27 No messages received for 10 min. 0 sent since last one of these. 21:42:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 21:42:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 21:42:27 MsgArea S: [UTC 2018-12-3 21:52:09] 21:52:27 No messages received for 10 min. 0 sent since last one of these. 21:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 21:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 21:52:27 MsgArea S: 22:02:27 No messages received for 10 min. 0 sent since last one of these. 22:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 22:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 22:02:27 MsgArea S: [UTC 2018-12-3 22:12:09] 22:12:27 No messages received for 10 min. 0 sent since last one of these. 22:12:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 22:12:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 22:12:27 MsgArea S: 22:22:27 No messages received for 10 min. 0 sent since last one of these. 22:22:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 22:22:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 22:22:27 MsgArea S: [UTC 2018-12-3 22:32:09] 22:32:27 No messages received for 10 min. 0 sent since last one of these. 22:32:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 22:32:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 22:32:27 MsgArea S: 22:42:27 No messages received for 10 min. 0 sent since last one of these. 22:42:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 22:42:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 22:42:27 MsgArea S: [UTC 2018-12-3 22:52:09] 22:52:27 No messages received for 10 min. 0 sent since last one of these. 22:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 22:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 22:52:27 MsgArea S: 23:02:27 No messages received for 10 min. 0 sent since last one of these. 23:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 23:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 23:02:27 MsgArea S: [UTC 2018-12-3 23:12:09] 23:12:27 No messages received for 10 min. 0 sent since last one of these. 23:12:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 23:12:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 23:12:27 MsgArea S: 23:22:27 No messages received for 10 min. 0 sent since last one of these. 23:22:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 23:22:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 23:22:27 MsgArea S: [UTC 2018-12-3 23:32:09] 23:32:27 No messages received for 10 min. 0 sent since last one of these. 23:32:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 23:32:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 23:32:27 MsgArea S: 23:42:27 No messages received for 10 min. 0 sent since last one of these. 23:42:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 23:42:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 23:42:27 MsgArea S: [UTC 2018-12-3 23:52:09] 23:52:27 No messages received for 10 min. 0 sent since last one of these. 23:52:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 23:52:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 23:52:27 MsgArea S: 00:02:27 No messages received for 10 min. 0 sent since last one of these. 00:02:27 MsgArea H: nextMessageSerial=17631 startMsgs=68 nextFree=28968 maxMsg=65468 00:02:27 MsgArea Q: Master=28356:28764 Camera=-1:-1 Observatory=-1:-1 Communicate=1020:1020 Analyze=-1:-1 00:02:27 MsgArea S: 00:10:23 Received message from Master: op=PointingHead serial=17632 00:10:23 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:10:23 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:10:23 Point started: ret=0 00:10:23 point_skyscan result=0 00:10:24 Check angles 00:10:24 SkyScan query 00:10:24 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:10:24 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:10:24 Message to Master queued w/err=0: serial=17632 error=0 00:10:29 Received message from Master: op=Filter serial=17633 00:10:29 Color wheel filter change from 2 to 2 00:10:29 FLIGetFilterPos err=0 currentPosition=2 00:10:29 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:29 Filter is already there-color wheel unchanged 00:10:29 Received message from Master: op=Shutter serial=17634 00:10:29 Shutter LASER close 00:10:30 Received message from Camera: op=State serial=17636 00:10:30 GetSingleValue result=40 Value=cccccccc 00:10:30 SkyScan query 00:10:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:10:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:31 Parameters OK 00:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:31 Set A/D data flow result=40 00:10:31 Set A/D channel type result=40 00:10:31 Set A/D encoding result=40 00:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:31 Set channel filter=0.000000e+000 result=40 00:10:31 Config A/D Result=40 00:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:31 Get A/D filter: -9.255963e+061 result=40 00:10:31 Get A/D value=-858993460 result=40 00:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:31 Parameters OK 00:10:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:31 Set A/D data flow result=40 00:10:31 Set A/D channel type result=40 00:10:31 Set A/D encoding result=40 00:10:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:31 Set channel filter=0.000000e+000 result=40 00:10:31 Config A/D Result=40 00:10:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:31 Get A/D filter: -9.255963e+061 result=40 00:10:31 Get A/D value=-858993460 result=40 00:10:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:31 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:31 Aux= 00:10:31 Message to Camera, serial 17636 queued 00:10:32 Received message from Master: op=PointingHead serial=17642 00:10:32 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:10:32 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:10:32 Point started: ret=0 00:10:32 point_skyscan result=0 00:10:33 Check angles 00:10:33 SkyScan query 00:10:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:10:33 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:10:33 Message to Master queued w/err=0: serial=17642 error=0 00:10:38 Received message from Master: op=Filter serial=17643 00:10:38 Color wheel filter change from 2 to 2 00:10:38 FLIGetFilterPos err=0 currentPosition=2 00:10:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:10:38 Filter is already there-color wheel unchanged 00:10:39 Received message from Master: op=Shutter serial=17644 00:10:39 Shutter LASER close 00:10:39 Received message from Camera: op=State serial=17646 00:10:39 GetSingleValue result=40 Value=cccccccc 00:10:39 SkyScan query 00:10:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:10:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:39 Parameters OK 00:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:39 Set A/D data flow result=40 00:10:39 Set A/D channel type result=40 00:10:39 Set A/D encoding result=40 00:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:39 Set channel filter=0.000000e+000 result=40 00:10:39 Config A/D Result=40 00:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:39 Get A/D filter: -9.255963e+061 result=40 00:10:39 Get A/D value=-858993460 result=40 00:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:10:39 Parameters OK 00:10:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:10:39 Set A/D data flow result=40 00:10:39 Set A/D channel type result=40 00:10:39 Set A/D encoding result=40 00:10:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:10:39 Set channel filter=0.000000e+000 result=40 00:10:39 Config A/D Result=40 00:10:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:10:39 Get A/D filter: -9.255963e+061 result=40 00:10:39 Get A/D value=-858993460 result=40 00:10:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:10:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:10:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:10:39 Aux= 00:10:39 Message to Camera, serial 17646 queued 00:11:10 Received message from Master: op=PointingHead serial=17653 00:11:10 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:11:10 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:11:11 Point started: ret=0 00:11:11 point_skyscan result=0 00:11:11 Check angles 00:11:11 SkyScan query 00:11:12 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:12 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:11:12 Message to Master queued w/err=0: serial=17653 error=0 00:11:17 Received message from Master: op=Filter serial=17654 00:11:17 Color wheel filter change from 2 to 2 00:11:17 FLIGetFilterPos err=0 currentPosition=2 00:11:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:17 Filter is already there-color wheel unchanged 00:11:17 Received message from Master: op=Shutter serial=17655 00:11:17 Shutter LASER open 00:11:17 Received message from Camera: op=State serial=17657 00:11:17 GetSingleValue result=40 Value=cccccccc 00:11:17 SkyScan query 00:11:18 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:18 Parameters OK 00:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:18 Set A/D data flow result=40 00:11:18 Set A/D channel type result=40 00:11:18 Set A/D encoding result=40 00:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:18 Set channel filter=0.000000e+000 result=40 00:11:18 Config A/D Result=40 00:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:18 Get A/D filter: -9.255963e+061 result=40 00:11:18 Get A/D value=-858993460 result=40 00:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:18 Parameters OK 00:11:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:18 Set A/D data flow result=40 00:11:18 Set A/D channel type result=40 00:11:18 Set A/D encoding result=40 00:11:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:18 Set channel filter=0.000000e+000 result=40 00:11:18 Config A/D Result=40 00:11:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:18 Get A/D filter: -9.255963e+061 result=40 00:11:18 Get A/D value=-858993460 result=40 00:11:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:18 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:18 Aux= 00:11:18 Message to Camera, serial 17657 queued 00:11:20 Received message from Master: op=Shutter serial=17661 00:11:20 Shutter LASER close 00:11:21 Received message from Master: op=PointingHead serial=17665 00:11:21 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:11:21 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:11:21 Point started: ret=0 00:11:21 point_skyscan result=0 00:11:22 Check angles 00:11:22 SkyScan query 00:11:22 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:22 Msec=0 True Az=112.995 Ze=-172.995 Az status=0008 Ze status=0008 00:11:22 Message to Master queued w/err=0: serial=17665 error=0 00:11:27 Received message from Master: op=Filter serial=17666 00:11:27 Color wheel filter change from 2 to 2 00:11:27 FLIGetFilterPos err=0 currentPosition=2 00:11:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:27 Filter is already there-color wheel unchanged 00:11:27 Received message from Master: op=Shutter serial=17667 00:11:27 Shutter LASER close 00:11:28 Received message from Camera: op=State serial=17669 00:11:28 GetSingleValue result=40 Value=cccccccc 00:11:28 SkyScan query 00:11:28 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:11:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:28 Parameters OK 00:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:28 Set A/D data flow result=40 00:11:28 Set A/D channel type result=40 00:11:28 Set A/D encoding result=40 00:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:28 Set channel filter=0.000000e+000 result=40 00:11:28 Config A/D Result=40 00:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:28 Get A/D filter: -9.255963e+061 result=40 00:11:28 Get A/D value=-858993460 result=40 00:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:28 Parameters OK 00:11:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:28 Set A/D data flow result=40 00:11:28 Set A/D channel type result=40 00:11:28 Set A/D encoding result=40 00:11:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:28 Set channel filter=0.000000e+000 result=40 00:11:28 Config A/D Result=40 00:11:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:28 Get A/D filter: -9.255963e+061 result=40 00:11:28 Get A/D value=-858993460 result=40 00:11:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:28 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:28 Aux= 00:11:28 Message to Camera, serial 17669 queued 00:11:31 Received message from Master: op=PointingHead serial=17676 00:11:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:11:31 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:11:32 Point started: ret=0 00:11:32 point_skyscan result=0 00:11:32 Check angles 00:11:32 SkyScan query 00:11:33 SkyScan query done: ret=0 az=136.065<-9071 ze=-143.355<-21557 Statuses=0009 0009 00:11:33 Msec=0 True Az=136.065 Ze=-143.355 Az status=0009 Ze status=0009 00:11:33 Check angles 00:11:33 SkyScan query 00:11:34 SkyScan query done: ret=0 az=153.435<-10229 ze=-122.4<-20160 Statuses=0009 0009 00:11:34 Msec=750 True Az=153.435 Ze=-122.4 Az status=0009 Ze status=0009 00:11:34 Check angles 00:11:34 SkyScan query 00:11:34 SkyScan query done: ret=0 az=171.315<-11421 ze=-101.01<-18734 Statuses=0009 0009 00:11:34 Msec=1500 True Az=171.315 Ze=-101.01 Az status=0009 Ze status=0009 00:11:35 Check angles 00:11:35 SkyScan query 00:11:35 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.62<-17308 Statuses=0008 0009 00:11:35 Msec=2250 True Az=176.01 Ze=-79.62 Az status=0008 Ze status=0009 00:11:35 Check angles 00:11:35 SkyScan query 00:11:36 SkyScan query done: ret=0 az=176.01<-11734 ze=-58.65<-15910 Statuses=0008 0009 00:11:36 Msec=3000 True Az=176.01 Ze=-58.65 Az status=0008 Ze status=0009 00:11:36 Check angles 00:11:36 SkyScan query 00:11:37 SkyScan query done: ret=0 az=176.01<-11734 ze=-51.465<-15431 Statuses=0008 0008 00:11:37 Msec=3750 True Az=176.01 Ze=-51.465 Az status=0008 Ze status=0008 00:11:37 Message to Master queued w/err=0: serial=17676 error=0 00:11:42 Received message from Master: op=Filter serial=17677 00:11:42 Color wheel filter change from 2 to 0 00:11:42 FLIGetFilterPos err=0 currentPosition=2 00:11:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:48 FLISetFilterPos err=0 rqPosition=0 00:11:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:48 Check after 0.00 sec for filter wheel DIn/CWh=0 00:11:48 FLIGetFilterPos err=0 currentPosition=0 00:11:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:11:48 Received message from Master: op=Shutter serial=17678 00:11:48 Shutter LASER close 00:11:48 Received message from Camera: op=State serial=17680 00:11:48 GetSingleValue result=40 Value=cccccccc 00:11:48 SkyScan query 00:11:49 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:11:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:49 Parameters OK 00:11:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:49 Set A/D data flow result=40 00:11:49 Set A/D channel type result=40 00:11:49 Set A/D encoding result=40 00:11:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:49 Set channel filter=0.000000e+000 result=40 00:11:49 Config A/D Result=40 00:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:49 Get A/D filter: -9.255963e+061 result=40 00:11:49 Get A/D value=-858993460 result=40 00:11:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:11:49 Parameters OK 00:11:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:11:49 Set A/D data flow result=40 00:11:49 Set A/D channel type result=40 00:11:49 Set A/D encoding result=40 00:11:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:11:49 Set channel filter=0.000000e+000 result=40 00:11:49 Config A/D Result=40 00:11:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:11:49 Get A/D filter: -9.255963e+061 result=40 00:11:49 Get A/D value=-858993460 result=40 00:11:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:11:49 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:11:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:11:49 Aux= 00:11:49 Message to Camera, serial 17680 queued [UTC 2018-12-4 00:12:09] 00:12:20 Received message from Master: op=PointingHead serial=17687 00:12:20 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:12:20 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:12:20 Point started: ret=0 00:12:20 point_skyscan result=0 00:12:21 Check angles 00:12:21 SkyScan query 00:12:21 SkyScan query done: ret=0 az=152.925<-10195 ze=-21.72<-13448 Statuses=0009 0009 00:12:21 Msec=0 True Az=152.925 Ze=-21.72 Az status=0009 Ze status=0009 00:12:21 Check angles 00:12:21 SkyScan query 00:12:22 SkyScan query done: ret=0 az=135.57<-9038 ze=-0.75<-12050 Statuses=0009 0009 00:12:22 Msec=750 True Az=135.57 Ze=-0.75 Az status=0009 Ze status=0009 00:12:22 Check angles 00:12:22 SkyScan query 00:12:23 SkyScan query done: ret=0 az=118.05<-7870 ze=20.205<-10653 Statuses=0009 0009 00:12:23 Msec=1500 True Az=118.05 Ze=20.205 Az status=0009 Ze status=0009 00:12:23 Check angles 00:12:23 SkyScan query 00:12:24 SkyScan query done: ret=0 az=100.59<-6706 ze=41.16<-9256 Statuses=0009 0009 00:12:24 Msec=2250 True Az=100.59 Ze=41.16 Az status=0009 Ze status=0009 00:12:24 Check angles 00:12:24 SkyScan query 00:12:24 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:12:24 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:12:24 Check angles 00:12:24 SkyScan query 00:12:25 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:12:25 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:12:25 Message to Master queued w/err=0: serial=17687 error=0 00:12:27 Received message from Master: op=Identify serial=17688 00:12:30 Received message from Master: op=Filter serial=17691 00:12:30 Color wheel filter change from 0 to 0 00:12:30 FLIGetFilterPos err=0 currentPosition=0 00:12:30 FLIGetStepsRemaining err=0 RemainingSteps=0 00:12:30 Filter is already there-color wheel unchanged 00:12:30 Received message from Master: op=Shutter serial=17692 00:12:30 Shutter LASER close 00:12:30 Received message from Camera: op=State serial=17694 00:12:30 GetSingleValue result=40 Value=cccccccc 00:12:30 SkyScan query 00:12:31 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:12:31 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:31 Parameters OK 00:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:31 Set A/D data flow result=40 00:12:31 Set A/D channel type result=40 00:12:31 Set A/D encoding result=40 00:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:31 Set channel filter=0.000000e+000 result=40 00:12:31 Config A/D Result=40 00:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:31 Get A/D filter: -9.255963e+061 result=40 00:12:31 Get A/D value=-858993460 result=40 00:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:31 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:12:31 Parameters OK 00:12:31 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:12:31 Set A/D data flow result=40 00:12:31 Set A/D channel type result=40 00:12:31 Set A/D encoding result=40 00:12:31 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:12:31 Set channel filter=0.000000e+000 result=40 00:12:31 Config A/D Result=40 00:12:31 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:12:31 Get A/D filter: -9.255963e+061 result=40 00:12:31 Get A/D value=-858993460 result=40 00:12:31 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:12:31 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:12:31 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:12:31 Aux= 00:12:31 Message to Camera, serial 17694 queued 00:13:02 Received message from Master: op=PointingHead serial=17701 00:13:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:13:02 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:13:02 Point started: ret=0 00:13:02 point_skyscan result=0 00:13:03 Check angles 00:13:03 SkyScan query 00:13:03 SkyScan query done: ret=0 az=109.38<-7292 ze=38.49<-9434 Statuses=0009 0008 00:13:03 Msec=0 True Az=109.38 Ze=38.49 Az status=0009 Ze status=0008 00:13:04 Check angles 00:13:04 SkyScan query 00:13:04 SkyScan query done: ret=0 az=127.17<-8478 ze=38.505<-9433 Statuses=0009 0008 00:13:04 Msec=750 True Az=127.17 Ze=38.505 Az status=0009 Ze status=0008 00:13:04 Check angles 00:13:04 SkyScan query 00:13:05 SkyScan query done: ret=0 az=145.05<-9670 ze=38.505<-9433 Statuses=0009 0008 00:13:05 Msec=1500 True Az=145.05 Ze=38.505 Az status=0009 Ze status=0008 00:13:05 Check angles 00:13:05 SkyScan query 00:13:06 SkyScan query done: ret=0 az=162.525<-10835 ze=38.505<-9433 Statuses=0009 0008 00:13:06 Msec=2250 True Az=162.525 Ze=38.505 Az status=0009 Ze status=0008 00:13:06 Check angles 00:13:06 SkyScan query 00:13:06 SkyScan query done: ret=0 az=175.98<-11732 ze=38.505<-9433 Statuses=0009 0008 00:13:06 Msec=3000 True Az=175.98 Ze=38.505 Az status=0009 Ze status=0008 00:13:07 Check angles 00:13:07 SkyScan query 00:13:07 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:13:07 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:13:07 Message to Master queued w/err=0: serial=17701 error=0 00:13:12 Received message from Master: op=Filter serial=17702 00:13:12 Color wheel filter change from 0 to 0 00:13:12 FLIGetFilterPos err=0 currentPosition=0 00:13:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:12 Filter is already there-color wheel unchanged 00:13:12 Received message from Master: op=Shutter serial=17703 00:13:12 Shutter LASER close 00:13:12 Received message from Camera: op=State serial=17705 00:13:12 GetSingleValue result=40 Value=cccccccc 00:13:12 SkyScan query 00:13:13 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:13:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:13 Parameters OK 00:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:13 Set A/D data flow result=40 00:13:13 Set A/D channel type result=40 00:13:13 Set A/D encoding result=40 00:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:13 Set channel filter=0.000000e+000 result=40 00:13:13 Config A/D Result=40 00:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:13 Get A/D filter: -9.255963e+061 result=40 00:13:13 Get A/D value=-858993460 result=40 00:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:13 Parameters OK 00:13:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:13 Set A/D data flow result=40 00:13:13 Set A/D channel type result=40 00:13:13 Set A/D encoding result=40 00:13:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:13 Set channel filter=0.000000e+000 result=40 00:13:13 Config A/D Result=40 00:13:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:13 Get A/D filter: -9.255963e+061 result=40 00:13:13 Get A/D value=-858993460 result=40 00:13:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:13 Aux= 00:13:13 Message to Camera, serial 17705 queued 00:13:44 Received message from Master: op=PointingHead serial=17712 00:13:44 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:13:44 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:13:44 Point started: ret=0 00:13:44 point_skyscan result=0 00:13:45 Check angles 00:13:45 SkyScan query 00:13:45 SkyScan query done: ret=0 az=153.12<-10208 ze=8.805<-11413 Statuses=0009 0009 00:13:45 Msec=0 True Az=153.12 Ze=8.805 Az status=0009 Ze status=0009 00:13:46 Check angles 00:13:46 SkyScan query 00:13:46 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.585<-12839 Statuses=0009 0009 00:13:46 Msec=750 True Az=135.345 Ze=-12.585 Az status=0009 Ze status=0009 00:13:46 Check angles 00:13:46 SkyScan query 00:13:47 SkyScan query done: ret=0 az=117.645<-7843 ze=-33.525<-14235 Statuses=0009 0009 00:13:47 Msec=1500 True Az=117.645 Ze=-33.525 Az status=0009 Ze status=0009 00:13:47 Check angles 00:13:47 SkyScan query 00:13:48 SkyScan query done: ret=0 az=100.41<-6694 ze=-51.54<-15436 Statuses=0009 0009 00:13:48 Msec=2250 True Az=100.41 Ze=-51.54 Az status=0009 Ze status=0009 00:13:48 Check angles 00:13:48 SkyScan query 00:13:48 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:13:48 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:13:49 Check angles 00:13:49 SkyScan query 00:13:49 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.51<-15434 Statuses=0008 0008 00:13:49 Msec=3750 True Az=85.995 Ze=-51.51 Az status=0008 Ze status=0008 00:13:49 Message to Master queued w/err=0: serial=17712 error=0 00:13:54 Received message from Master: op=Filter serial=17713 00:13:54 Color wheel filter change from 0 to 0 00:13:54 FLIGetFilterPos err=0 currentPosition=0 00:13:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:13:54 Filter is already there-color wheel unchanged 00:13:54 Received message from Master: op=Shutter serial=17714 00:13:54 Shutter LASER close 00:13:54 Received message from Camera: op=State serial=17716 00:13:54 GetSingleValue result=40 Value=cccccccc 00:13:54 SkyScan query 00:13:55 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:13:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:55 Parameters OK 00:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:55 Set A/D data flow result=40 00:13:55 Set A/D channel type result=40 00:13:55 Set A/D encoding result=40 00:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:55 Set channel filter=0.000000e+000 result=40 00:13:55 Config A/D Result=40 00:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:55 Get A/D filter: -9.255963e+061 result=40 00:13:55 Get A/D value=-858993460 result=40 00:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:13:55 Parameters OK 00:13:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:13:55 Set A/D data flow result=40 00:13:55 Set A/D channel type result=40 00:13:55 Set A/D encoding result=40 00:13:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:13:55 Set channel filter=0.000000e+000 result=40 00:13:55 Config A/D Result=40 00:13:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:13:55 Get A/D filter: -9.255963e+061 result=40 00:13:55 Get A/D value=-858993460 result=40 00:13:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:13:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:13:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:13:55 Aux= 00:13:55 Message to Camera, serial 17716 queued 00:14:26 Received message from Master: op=PointingHead serial=17723 00:14:26 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:14:26 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:14:26 Point started: ret=0 00:14:26 point_skyscan result=0 00:14:27 Check angles 00:14:27 SkyScan query 00:14:28 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.12<-17408 Statuses=0009 0009 00:14:28 Msec=0 True Az=108.84 Ze=-81.12 Az status=0009 Ze status=0009 00:14:28 Check angles 00:14:28 SkyScan query 00:14:28 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.075<-18805 Statuses=0008 0009 00:14:28 Msec=750 True Az=113.01 Ze=-102.075 Az status=0008 Ze status=0009 00:14:28 Check angles 00:14:28 SkyScan query 00:14:29 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.03<-20202 Statuses=0008 0009 00:14:29 Msec=1500 True Az=112.995 Ze=-123.03 Az status=0008 Ze status=0009 00:14:29 Check angles 00:14:29 SkyScan query 00:14:30 SkyScan query done: ret=0 az=112.995<-7533 ze=-143.97<-21598 Statuses=0008 0009 00:14:30 Msec=2250 True Az=112.995 Ze=-143.97 Az status=0008 Ze status=0009 00:14:30 Check angles 00:14:30 SkyScan query 00:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.375<-23025 Statuses=0008 0009 00:14:31 Msec=3000 True Az=112.995 Ze=-165.375 Az status=0008 Ze status=0009 00:14:31 Check angles 00:14:31 SkyScan query 00:14:31 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:14:31 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:14:31 Message to Master queued w/err=0: serial=17723 error=0 00:14:36 Received message from Master: op=Filter serial=17724 00:14:36 Color wheel filter change from 0 to 0 00:14:36 FLIGetFilterPos err=0 currentPosition=0 00:14:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:36 Filter is already there-color wheel unchanged 00:14:36 Received message from Master: op=Shutter serial=17725 00:14:36 Shutter LASER open 00:14:37 Received message from Camera: op=State serial=17727 00:14:37 GetSingleValue result=40 Value=cccccccc 00:14:37 SkyScan query 00:14:37 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:14:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:37 Parameters OK 00:14:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:37 Set A/D data flow result=40 00:14:37 Set A/D channel type result=40 00:14:37 Set A/D encoding result=40 00:14:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:37 Set channel filter=0.000000e+000 result=40 00:14:37 Config A/D Result=40 00:14:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:37 Get A/D filter: -9.255963e+061 result=40 00:14:37 Get A/D value=-858993460 result=40 00:14:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:37 Parameters OK 00:14:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:37 Set A/D data flow result=40 00:14:37 Set A/D channel type result=40 00:14:37 Set A/D encoding result=40 00:14:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:37 Set channel filter=0.000000e+000 result=40 00:14:37 Config A/D Result=40 00:14:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:37 Get A/D filter: -9.255963e+061 result=40 00:14:37 Get A/D value=-858993460 result=40 00:14:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:37 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:37 Aux= 00:14:37 Message to Camera, serial 17727 queued 00:14:40 Received message from Master: op=Shutter serial=17731 00:14:40 Shutter LASER close 00:14:40 Received message from Master: op=PointingHead serial=17735 00:14:40 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:14:40 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:14:40 Point started: ret=0 00:14:40 point_skyscan result=0 00:14:41 Check angles 00:14:41 SkyScan query 00:14:42 SkyScan query done: ret=0 az=90.24<-6016 ze=157.53<-1498 Statuses=0009 0009 00:14:42 Msec=0 True Az=90.24 Ze=157.53 Az status=0009 Ze status=0009 00:14:42 Check angles 00:14:42 SkyScan query 00:14:42 SkyScan query done: ret=0 az=72.375<-4825 ze=136.14<-2924 Statuses=0009 0009 00:14:42 Msec=750 True Az=72.375 Ze=136.14 Az status=0009 Ze status=0009 00:14:43 Check angles 00:14:43 SkyScan query 00:14:43 SkyScan query done: ret=0 az=54.855<-3657 ze=115.185<-4321 Statuses=0009 0009 00:14:43 Msec=1500 True Az=54.855 Ze=115.185 Az status=0009 Ze status=0009 00:14:43 Check angles 00:14:43 SkyScan query 00:14:44 SkyScan query done: ret=0 az=40.815<-2721 ze=94.215<-5719 Statuses=0009 0009 00:14:44 Msec=2250 True Az=40.815 Ze=94.215 Az status=0009 Ze status=0009 00:14:44 Check angles 00:14:44 SkyScan query 00:14:45 SkyScan query done: ret=0 az=40.995<-2733 ze=72.84<-7144 Statuses=0008 0009 00:14:45 Msec=3000 True Az=40.995 Ze=72.84 Az status=0008 Ze status=0009 00:14:45 Check angles 00:14:45 SkyScan query 00:14:46 SkyScan query done: ret=0 az=40.995<-2733 ze=52.245<-8517 Statuses=0008 0009 00:14:46 Msec=3750 True Az=40.995 Ze=52.245 Az status=0008 Ze status=0009 00:14:46 Check angles 00:14:46 SkyScan query 00:14:46 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:14:46 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:14:46 Message to Master queued w/err=0: serial=17735 error=0 00:14:51 Received message from Master: op=Filter serial=17736 00:14:51 Color wheel filter change from 0 to 0 00:14:51 FLIGetFilterPos err=0 currentPosition=0 00:14:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:14:51 Filter is already there-color wheel unchanged 00:14:51 Received message from Master: op=Shutter serial=17737 00:14:51 Shutter LASER close 00:14:52 Received message from Camera: op=State serial=17739 00:14:52 GetSingleValue result=40 Value=cccccccc 00:14:52 SkyScan query 00:14:52 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:14:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:52 Parameters OK 00:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:52 Set A/D data flow result=40 00:14:52 Set A/D channel type result=40 00:14:52 Set A/D encoding result=40 00:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:52 Set channel filter=0.000000e+000 result=40 00:14:52 Config A/D Result=40 00:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:52 Get A/D filter: -9.255963e+061 result=40 00:14:52 Get A/D value=-858993460 result=40 00:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:14:52 Parameters OK 00:14:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:14:52 Set A/D data flow result=40 00:14:52 Set A/D channel type result=40 00:14:52 Set A/D encoding result=40 00:14:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:14:52 Set channel filter=0.000000e+000 result=40 00:14:52 Config A/D Result=40 00:14:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:14:52 Get A/D filter: -9.255963e+061 result=40 00:14:52 Get A/D value=-858993460 result=40 00:14:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:14:52 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:14:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:14:52 Aux= 00:14:52 Message to Camera, serial 17739 queued 00:15:23 Received message from Master: op=PointingHead serial=17746 00:15:23 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:15:23 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:15:23 Point started: ret=0 00:15:23 point_skyscan result=0 00:15:24 Check angles 00:15:24 SkyScan query 00:15:25 SkyScan query done: ret=0 az=63.855<-4257 ze=66.555<-7563 Statuses=0009 0008 00:15:25 Msec=0 True Az=63.855 Ze=66.555 Az status=0009 Ze status=0008 00:15:25 Check angles 00:15:25 SkyScan query 00:15:25 SkyScan query done: ret=0 az=81.87<-5458 ze=66.495<-7567 Statuses=0009 0008 00:15:25 Msec=750 True Az=81.87 Ze=66.495 Az status=0009 Ze status=0008 00:15:26 Check angles 00:15:26 SkyScan query 00:15:26 SkyScan query done: ret=0 az=99.69<-6646 ze=66.495<-7567 Statuses=0009 0008 00:15:26 Msec=1500 True Az=99.69 Ze=66.495 Az status=0009 Ze status=0008 00:15:26 Check angles 00:15:26 SkyScan query 00:15:27 SkyScan query done: ret=0 az=117<-7800 ze=66.495<-7567 Statuses=0009 0008 00:15:27 Msec=2250 True Az=117 Ze=66.495 Az status=0009 Ze status=0008 00:15:27 Check angles 00:15:27 SkyScan query 00:15:28 SkyScan query done: ret=0 az=134.97<-8998 ze=66.495<-7567 Statuses=0009 0008 00:15:28 Msec=3000 True Az=134.97 Ze=66.495 Az status=0009 Ze status=0008 00:15:28 Check angles 00:15:28 SkyScan query 00:15:29 SkyScan query done: ret=0 az=152.625<-10175 ze=66.495<-7567 Statuses=0009 0008 00:15:29 Msec=3750 True Az=152.625 Ze=66.495 Az status=0009 Ze status=0008 00:15:29 Check angles 00:15:29 SkyScan query 00:15:29 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:15:29 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:15:29 Message to Master queued w/err=0: serial=17746 error=0 00:15:34 Received message from Master: op=Filter serial=17747 00:15:34 Color wheel filter change from 0 to 0 00:15:34 FLIGetFilterPos err=0 currentPosition=0 00:15:34 FLIGetStepsRemaining err=0 RemainingSteps=0 00:15:34 Filter is already there-color wheel unchanged 00:15:34 Received message from Master: op=Shutter serial=17748 00:15:34 Shutter LASER close 00:15:34 Received message from Camera: op=State serial=17750 00:15:34 GetSingleValue result=40 Value=cccccccc 00:15:34 SkyScan query 00:15:35 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:15:35 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:35 Parameters OK 00:15:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:35 Set A/D data flow result=40 00:15:35 Set A/D channel type result=40 00:15:35 Set A/D encoding result=40 00:15:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:35 Set channel filter=0.000000e+000 result=40 00:15:35 Config A/D Result=40 00:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:35 Get A/D filter: -9.255963e+061 result=40 00:15:35 Get A/D value=-858993460 result=40 00:15:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:35 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:15:35 Parameters OK 00:15:35 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:15:35 Set A/D data flow result=40 00:15:35 Set A/D channel type result=40 00:15:35 Set A/D encoding result=40 00:15:35 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:15:35 Set channel filter=0.000000e+000 result=40 00:15:35 Config A/D Result=40 00:15:35 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:15:35 Get A/D filter: -9.255963e+061 result=40 00:15:35 Get A/D value=-858993460 result=40 00:15:35 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:15:35 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:15:35 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:15:35 Aux= 00:15:35 Message to Camera, serial 17750 queued 00:16:06 Received message from Master: op=PointingHead serial=17757 00:16:06 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:16:06 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:16:06 Point started: ret=0 00:16:06 point_skyscan result=0 00:16:07 Check angles 00:16:07 SkyScan query 00:16:08 SkyScan query done: ret=0 az=135.15<-9010 ze=36.885<-9541 Statuses=0009 0009 00:16:08 Msec=0 True Az=135.15 Ze=36.885 Az status=0009 Ze status=0009 00:16:08 Check angles 00:16:08 SkyScan query 00:16:08 SkyScan query done: ret=0 az=117.63<-7842 ze=15.915<-10939 Statuses=0009 0009 00:16:08 Msec=750 True Az=117.63 Ze=15.915 Az status=0009 Ze status=0009 00:16:08 Check angles 00:16:08 SkyScan query 00:16:09 SkyScan query done: ret=0 az=100.23<-6682 ze=-5.04<-12336 Statuses=0009 0009 00:16:09 Msec=1500 True Az=100.23 Ze=-5.04 Az status=0009 Ze status=0009 00:16:09 Check angles 00:16:09 SkyScan query 00:16:10 SkyScan query done: ret=0 az=82.77<-5518 ze=-26.01<-13734 Statuses=0009 0009 00:16:10 Msec=2250 True Az=82.77 Ze=-26.01 Az status=0009 Ze status=0009 00:16:10 Check angles 00:16:10 SkyScan query 00:16:11 SkyScan query done: ret=0 az=64.935<-4329 ze=-38.55<-14570 Statuses=0009 0008 00:16:11 Msec=3000 True Az=64.935 Ze=-38.55 Az status=0009 Ze status=0008 00:16:11 Check angles 00:16:11 SkyScan query 00:16:11 SkyScan query done: ret=0 az=47.535<-3169 ze=-38.535<-14569 Statuses=0009 0008 00:16:11 Msec=3750 True Az=47.535 Ze=-38.535 Az status=0009 Ze status=0008 00:16:12 Check angles 00:16:12 SkyScan query 00:16:12 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:16:12 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:16:12 Message to Master queued w/err=0: serial=17757 error=0 00:16:17 Received message from Master: op=Filter serial=17758 00:16:17 Color wheel filter change from 0 to 0 00:16:17 FLIGetFilterPos err=0 currentPosition=0 00:16:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:17 Filter is already there-color wheel unchanged 00:16:17 Received message from Master: op=Shutter serial=17759 00:16:17 Shutter LASER close 00:16:17 Received message from Camera: op=State serial=17761 00:16:17 GetSingleValue result=40 Value=cccccccc 00:16:17 SkyScan query 00:16:18 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:16:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:18 Parameters OK 00:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:18 Set A/D data flow result=40 00:16:18 Set A/D channel type result=40 00:16:18 Set A/D encoding result=40 00:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:18 Set channel filter=0.000000e+000 result=40 00:16:18 Config A/D Result=40 00:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:18 Get A/D filter: -9.255963e+061 result=40 00:16:18 Get A/D value=-858993460 result=40 00:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:16:18 Parameters OK 00:16:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:16:18 Set A/D data flow result=40 00:16:18 Set A/D channel type result=40 00:16:18 Set A/D encoding result=40 00:16:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:16:18 Set channel filter=0.000000e+000 result=40 00:16:18 Config A/D Result=40 00:16:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:16:18 Get A/D filter: -9.255963e+061 result=40 00:16:18 Get A/D value=-858993460 result=40 00:16:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:16:18 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:16:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:16:18 Aux= 00:16:18 Message to Camera, serial 17761 queued 00:16:49 Received message from Master: op=PointingHead serial=17768 00:16:49 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:16:49 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:16:49 Point started: ret=0 00:16:49 point_skyscan result=0 00:16:50 Check angles 00:16:50 SkyScan query 00:16:50 SkyScan query done: ret=0 az=64.095<-4273 ze=-68.55<-16570 Statuses=0009 0009 00:16:50 Msec=0 True Az=64.095 Ze=-68.55 Az status=0009 Ze status=0009 00:16:51 Check angles 00:16:51 SkyScan query 00:16:51 SkyScan query done: ret=0 az=81.915<-5461 ze=-89.505<-17967 Statuses=0009 0009 00:16:51 Msec=750 True Az=81.915 Ze=-89.505 Az status=0009 Ze status=0009 00:16:51 Check angles 00:16:51 SkyScan query 00:16:52 SkyScan query done: ret=0 az=99.315<-6621 ze=-110.46<-19364 Statuses=0009 0009 00:16:52 Msec=1500 True Az=99.315 Ze=-110.46 Az status=0009 Ze status=0009 00:16:52 Check angles 00:16:52 SkyScan query 00:16:53 SkyScan query done: ret=0 az=116.565<-7771 ze=-131.4<-20760 Statuses=0009 0009 00:16:53 Msec=2250 True Az=116.565 Ze=-131.4 Az status=0009 Ze status=0009 00:16:53 Check angles 00:16:53 SkyScan query 00:16:53 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 00:16:53 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 00:16:54 Check angles 00:16:54 SkyScan query 00:16:54 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:16:54 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:16:54 Message to Master queued w/err=0: serial=17768 error=0 00:16:59 Received message from Master: op=Filter serial=17769 00:16:59 Color wheel filter change from 0 to 0 00:16:59 FLIGetFilterPos err=0 currentPosition=0 00:16:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:16:59 Filter is already there-color wheel unchanged 00:16:59 Received message from Master: op=Shutter serial=17770 00:16:59 Shutter LASER close 00:16:59 Received message from Camera: op=State serial=17772 00:16:59 GetSingleValue result=40 Value=cccccccc 00:16:59 SkyScan query 00:17:00 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:17:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:00 Parameters OK 00:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:00 Set A/D data flow result=40 00:17:00 Set A/D channel type result=40 00:17:00 Set A/D encoding result=40 00:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:00 Set channel filter=0.000000e+000 result=40 00:17:00 Config A/D Result=40 00:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:00 Get A/D filter: -9.255963e+061 result=40 00:17:00 Get A/D value=-858993460 result=40 00:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:00 Parameters OK 00:17:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:00 Set A/D data flow result=40 00:17:00 Set A/D channel type result=40 00:17:00 Set A/D encoding result=40 00:17:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:00 Set channel filter=0.000000e+000 result=40 00:17:00 Config A/D Result=40 00:17:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:00 Get A/D filter: -9.255963e+061 result=40 00:17:00 Get A/D value=-858993460 result=40 00:17:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:00 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:00 Aux= 00:17:00 Message to Camera, serial 17772 queued 00:17:31 Received message from Master: op=PointingHead serial=17779 00:17:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:17:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:17:31 Point started: ret=0 00:17:31 point_skyscan result=0 00:17:32 Check angles 00:17:32 SkyScan query 00:17:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-171<-23400 Statuses=0009 0009 00:17:33 Msec=0 True Az=113.01 Ze=-171 Az status=0009 Ze status=0009 00:17:33 Check angles 00:17:33 SkyScan query 00:17:33 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:17:33 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:17:33 Message to Master queued w/err=0: serial=17779 error=0 00:17:38 Received message from Master: op=Filter serial=17780 00:17:38 Color wheel filter change from 0 to 0 00:17:38 FLIGetFilterPos err=0 currentPosition=0 00:17:38 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:38 Filter is already there-color wheel unchanged 00:17:38 Received message from Master: op=Shutter serial=17781 00:17:38 Shutter LASER open 00:17:39 Received message from Camera: op=State serial=17783 00:17:39 GetSingleValue result=40 Value=cccccccc 00:17:39 SkyScan query 00:17:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:17:39 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:39 Parameters OK 00:17:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:39 Set A/D data flow result=40 00:17:39 Set A/D channel type result=40 00:17:39 Set A/D encoding result=40 00:17:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:39 Set channel filter=0.000000e+000 result=40 00:17:39 Config A/D Result=40 00:17:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:39 Get A/D filter: -9.255963e+061 result=40 00:17:39 Get A/D value=-858993460 result=40 00:17:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:39 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:39 Parameters OK 00:17:39 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:39 Set A/D data flow result=40 00:17:39 Set A/D channel type result=40 00:17:39 Set A/D encoding result=40 00:17:39 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:39 Set channel filter=0.000000e+000 result=40 00:17:39 Config A/D Result=40 00:17:39 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:39 Get A/D filter: -9.255963e+061 result=40 00:17:39 Get A/D value=-858993460 result=40 00:17:39 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:39 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:39 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:39 Aux= 00:17:39 Message to Camera, serial 17783 queued 00:17:42 Received message from Master: op=Shutter serial=17787 00:17:42 Shutter LASER close 00:17:42 Received message from Master: op=PointingHead serial=17791 00:17:42 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:17:42 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:17:43 Point started: ret=0 00:17:43 point_skyscan result=0 00:17:43 Check angles 00:17:43 SkyScan query 00:17:44 SkyScan query done: ret=0 az=136.395<-9093 ze=-142.83<-21522 Statuses=0009 0009 00:17:44 Msec=0 True Az=136.395 Ze=-142.83 Az status=0009 Ze status=0009 00:17:44 Check angles 00:17:44 SkyScan query 00:17:45 SkyScan query done: ret=0 az=153.915<-10261 ze=-121.86<-20124 Statuses=0009 0009 00:17:45 Msec=750 True Az=153.915 Ze=-121.86 Az status=0009 Ze status=0009 00:17:45 Check angles 00:17:45 SkyScan query 00:17:45 SkyScan query done: ret=0 az=171.255<-11417 ze=-100.935<-18729 Statuses=0009 0009 00:17:45 Msec=1500 True Az=171.255 Ze=-100.935 Az status=0009 Ze status=0009 00:17:46 Check angles 00:17:46 SkyScan query 00:17:46 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.965<-17331 Statuses=0008 0009 00:17:46 Msec=2250 True Az=176.01 Ze=-79.965 Az status=0008 Ze status=0009 00:17:46 Check angles 00:17:46 SkyScan query 00:17:47 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 00:17:47 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 00:17:47 Check angles 00:17:47 SkyScan query 00:17:48 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:17:48 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:17:48 Message to Master queued w/err=0: serial=17791 error=0 00:17:53 Received message from Master: op=Filter serial=17792 00:17:53 Color wheel filter change from 0 to 0 00:17:53 FLIGetFilterPos err=0 currentPosition=0 00:17:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:17:53 Filter is already there-color wheel unchanged 00:17:53 Received message from Master: op=Shutter serial=17793 00:17:53 Shutter LASER close 00:17:53 Received message from Camera: op=State serial=17795 00:17:53 GetSingleValue result=40 Value=cccccccc 00:17:53 SkyScan query 00:17:54 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:17:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:54 Parameters OK 00:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:54 Set A/D data flow result=40 00:17:54 Set A/D channel type result=40 00:17:54 Set A/D encoding result=40 00:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:54 Set channel filter=0.000000e+000 result=40 00:17:54 Config A/D Result=40 00:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:54 Get A/D filter: -9.255963e+061 result=40 00:17:54 Get A/D value=-858993460 result=40 00:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:17:54 Parameters OK 00:17:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:17:54 Set A/D data flow result=40 00:17:54 Set A/D channel type result=40 00:17:54 Set A/D encoding result=40 00:17:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:17:54 Set channel filter=0.000000e+000 result=40 00:17:54 Config A/D Result=40 00:17:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:17:54 Get A/D filter: -9.255963e+061 result=40 00:17:54 Get A/D value=-858993460 result=40 00:17:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:17:54 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:17:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:17:54 Aux= 00:17:54 Message to Camera, serial 17795 queued 00:18:24 Received message from Master: op=PointingHead serial=17802 00:18:24 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:18:24 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:18:25 Point started: ret=0 00:18:25 point_skyscan result=0 00:18:25 Check angles 00:18:25 SkyScan query 00:18:26 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.765<-13451 Statuses=0009 0009 00:18:26 Msec=0 True Az=153.105 Ze=-21.765 Az status=0009 Ze status=0009 00:18:26 Check angles 00:18:26 SkyScan query 00:18:27 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.81<-12054 Statuses=0009 0009 00:18:27 Msec=750 True Az=135.66 Ze=-0.81 Az status=0009 Ze status=0009 00:18:27 Check angles 00:18:27 SkyScan query 00:18:28 SkyScan query done: ret=0 az=118.08<-7872 ze=20.145<-10657 Statuses=0009 0009 00:18:28 Msec=1500 True Az=118.08 Ze=20.145 Az status=0009 Ze status=0009 00:18:28 Check angles 00:18:28 SkyScan query 00:18:28 SkyScan query done: ret=0 az=100.68<-6712 ze=41.085<-9261 Statuses=0009 0009 00:18:28 Msec=2250 True Az=100.68 Ze=41.085 Az status=0009 Ze status=0009 00:18:28 Check angles 00:18:28 SkyScan query 00:18:29 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:18:29 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:18:29 Check angles 00:18:29 SkyScan query 00:18:30 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:18:30 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:18:30 Message to Master queued w/err=0: serial=17802 error=0 00:18:35 Received message from Master: op=Filter serial=17803 00:18:35 Color wheel filter change from 0 to 0 00:18:35 FLIGetFilterPos err=0 currentPosition=0 00:18:35 FLIGetStepsRemaining err=0 RemainingSteps=0 00:18:35 Filter is already there-color wheel unchanged 00:18:35 Received message from Master: op=Shutter serial=17804 00:18:35 Shutter LASER close 00:18:35 Received message from Camera: op=State serial=17806 00:18:35 GetSingleValue result=40 Value=cccccccc 00:18:35 SkyScan query 00:18:36 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:18:36 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:36 Parameters OK 00:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:36 Set A/D data flow result=40 00:18:36 Set A/D channel type result=40 00:18:36 Set A/D encoding result=40 00:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:36 Set channel filter=0.000000e+000 result=40 00:18:36 Config A/D Result=40 00:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:36 Get A/D filter: -9.255963e+061 result=40 00:18:36 Get A/D value=-858993460 result=40 00:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:36 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:18:36 Parameters OK 00:18:36 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:18:36 Set A/D data flow result=40 00:18:36 Set A/D channel type result=40 00:18:36 Set A/D encoding result=40 00:18:36 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:18:36 Set channel filter=0.000000e+000 result=40 00:18:36 Config A/D Result=40 00:18:36 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:18:36 Get A/D filter: -9.255963e+061 result=40 00:18:36 Get A/D value=-858993460 result=40 00:18:36 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:18:36 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:18:36 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:18:36 Aux= 00:18:36 Message to Camera, serial 17806 queued 00:19:06 Received message from Master: op=PointingHead serial=17813 00:19:06 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:19:06 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:19:07 Point started: ret=0 00:19:07 point_skyscan result=0 00:19:08 Check angles 00:19:08 SkyScan query 00:19:08 SkyScan query done: ret=0 az=109.035<-7269 ze=38.49<-9434 Statuses=0009 0008 00:19:08 Msec=0 True Az=109.035 Ze=38.49 Az status=0009 Ze status=0008 00:19:08 Check angles 00:19:08 SkyScan query 00:19:09 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 00:19:09 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 00:19:09 Check angles 00:19:09 SkyScan query 00:19:10 SkyScan query done: ret=0 az=144.075<-9605 ze=38.505<-9433 Statuses=0009 0008 00:19:10 Msec=1500 True Az=144.075 Ze=38.505 Az status=0009 Ze status=0008 00:19:10 Check angles 00:19:10 SkyScan query 00:19:10 SkyScan query done: ret=0 az=161.49<-10766 ze=38.505<-9433 Statuses=0009 0008 00:19:10 Msec=2250 True Az=161.49 Ze=38.505 Az status=0009 Ze status=0008 00:19:11 Check angles 00:19:11 SkyScan query 00:19:11 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:19:11 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:19:11 Check angles 00:19:11 SkyScan query 00:19:12 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:19:12 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:19:12 Message to Master queued w/err=0: serial=17813 error=0 00:19:17 Received message from Master: op=Filter serial=17814 00:19:17 Color wheel filter change from 0 to 0 00:19:17 FLIGetFilterPos err=0 currentPosition=0 00:19:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:17 Filter is already there-color wheel unchanged 00:19:17 Received message from Master: op=Shutter serial=17815 00:19:17 Shutter LASER close 00:19:17 Received message from Camera: op=State serial=17817 00:19:17 GetSingleValue result=40 Value=cccccccc 00:19:17 SkyScan query 00:19:18 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:19:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:18 Parameters OK 00:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:18 Set A/D data flow result=40 00:19:18 Set A/D channel type result=40 00:19:18 Set A/D encoding result=40 00:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:18 Set channel filter=0.000000e+000 result=40 00:19:18 Config A/D Result=40 00:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:18 Get A/D filter: -9.255963e+061 result=40 00:19:18 Get A/D value=-858993460 result=40 00:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:19:18 Parameters OK 00:19:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:19:18 Set A/D data flow result=40 00:19:18 Set A/D channel type result=40 00:19:18 Set A/D encoding result=40 00:19:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:19:18 Set channel filter=0.000000e+000 result=40 00:19:18 Config A/D Result=40 00:19:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:19:18 Get A/D filter: -9.255963e+061 result=40 00:19:18 Get A/D value=-858993460 result=40 00:19:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:19:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:19:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:19:18 Aux= 00:19:18 Message to Camera, serial 17817 queued 00:19:49 Received message from Master: op=PointingHead serial=17824 00:19:49 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:19:49 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:19:49 Point started: ret=0 00:19:49 point_skyscan result=0 00:19:50 Check angles 00:19:50 SkyScan query 00:19:50 SkyScan query done: ret=0 az=152.745<-10183 ze=8.355<-11443 Statuses=0009 0009 00:19:50 Msec=0 True Az=152.745 Ze=8.355 Az status=0009 Ze status=0009 00:19:50 Check angles 00:19:50 SkyScan query 00:19:51 SkyScan query done: ret=0 az=134.91<-8994 ze=-13.02<-12868 Statuses=0009 0009 00:19:51 Msec=750 True Az=134.91 Ze=-13.02 Az status=0009 Ze status=0009 00:19:51 Check angles 00:19:51 SkyScan query 00:19:52 SkyScan query done: ret=0 az=117<-7800 ze=-34.425<-14295 Statuses=0009 0009 00:19:52 Msec=1500 True Az=117 Ze=-34.425 Az status=0009 Ze status=0009 00:19:52 Check angles 00:19:52 SkyScan query 00:19:53 SkyScan query done: ret=0 az=99.6<-6640 ze=-51.555<-15437 Statuses=0009 0009 00:19:53 Msec=2250 True Az=99.6 Ze=-51.555 Az status=0009 Ze status=0009 00:19:53 Check angles 00:19:53 SkyScan query 00:19:53 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:19:53 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:19:53 Check angles 00:19:53 SkyScan query 00:19:54 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:19:54 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:19:54 Message to Master queued w/err=0: serial=17824 error=0 00:19:59 Received message from Master: op=Filter serial=17825 00:19:59 Color wheel filter change from 0 to 0 00:19:59 FLIGetFilterPos err=0 currentPosition=0 00:19:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:19:59 Filter is already there-color wheel unchanged 00:19:59 Received message from Master: op=Shutter serial=17826 00:19:59 Shutter LASER close 00:19:59 Received message from Camera: op=State serial=17828 00:19:59 GetSingleValue result=40 Value=cccccccc 00:19:59 SkyScan query 00:20:00 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:20:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:00 Parameters OK 00:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:00 Set A/D data flow result=40 00:20:00 Set A/D channel type result=40 00:20:00 Set A/D encoding result=40 00:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:00 Set channel filter=0.000000e+000 result=40 00:20:00 Config A/D Result=40 00:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:00 Get A/D filter: -9.255963e+061 result=40 00:20:00 Get A/D value=-858993460 result=40 00:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:00 Parameters OK 00:20:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:00 Set A/D data flow result=40 00:20:00 Set A/D channel type result=40 00:20:00 Set A/D encoding result=40 00:20:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:00 Set channel filter=0.000000e+000 result=40 00:20:00 Config A/D Result=40 00:20:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:00 Get A/D filter: -9.255963e+061 result=40 00:20:00 Get A/D value=-858993460 result=40 00:20:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:00 Aux= 00:20:00 Message to Camera, serial 17828 queued 00:20:31 Received message from Master: op=PointingHead serial=17835 00:20:31 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:20:31 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:20:31 Point started: ret=0 00:20:31 point_skyscan result=0 00:20:32 Check angles 00:20:32 SkyScan query 00:20:32 SkyScan query done: ret=0 az=109.035<-7269 ze=-81.285<-17419 Statuses=0009 0009 00:20:32 Msec=0 True Az=109.035 Ze=-81.285 Az status=0009 Ze status=0009 00:20:33 Check angles 00:20:33 SkyScan query 00:20:33 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.66<-18844 Statuses=0008 0009 00:20:33 Msec=750 True Az=113.01 Ze=-102.66 Az status=0008 Ze status=0009 00:20:33 Check angles 00:20:33 SkyScan query 00:20:34 SkyScan query done: ret=0 az=112.995<-7533 ze=-123.63<-20242 Statuses=0008 0009 00:20:34 Msec=1500 True Az=112.995 Ze=-123.63 Az status=0008 Ze status=0009 00:20:34 Check angles 00:20:34 SkyScan query 00:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.63<-21642 Statuses=0008 0009 00:20:35 Msec=2250 True Az=112.995 Ze=-144.63 Az status=0008 Ze status=0009 00:20:35 Check angles 00:20:35 SkyScan query 00:20:35 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.945<-23063 Statuses=0008 0009 00:20:35 Msec=3000 True Az=112.995 Ze=-165.945 Az status=0008 Ze status=0009 00:20:36 Check angles 00:20:36 SkyScan query 00:20:36 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:20:36 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:20:36 Message to Master queued w/err=0: serial=17835 error=0 00:20:41 Received message from Master: op=Filter serial=17836 00:20:41 Color wheel filter change from 0 to 0 00:20:41 FLIGetFilterPos err=0 currentPosition=0 00:20:41 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:41 Filter is already there-color wheel unchanged 00:20:41 Received message from Master: op=Shutter serial=17837 00:20:41 Shutter LASER open 00:20:41 Received message from Camera: op=State serial=17839 00:20:41 GetSingleValue result=40 Value=cccccccc 00:20:41 SkyScan query 00:20:42 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:20:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:42 Parameters OK 00:20:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:42 Set A/D data flow result=40 00:20:42 Set A/D channel type result=40 00:20:42 Set A/D encoding result=40 00:20:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:42 Set channel filter=0.000000e+000 result=40 00:20:42 Config A/D Result=40 00:20:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:42 Get A/D filter: -9.255963e+061 result=40 00:20:42 Get A/D value=-858993460 result=40 00:20:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:42 Parameters OK 00:20:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:42 Set A/D data flow result=40 00:20:42 Set A/D channel type result=40 00:20:42 Set A/D encoding result=40 00:20:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:42 Set channel filter=0.000000e+000 result=40 00:20:42 Config A/D Result=40 00:20:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:42 Get A/D filter: -9.255963e+061 result=40 00:20:42 Get A/D value=-858993460 result=40 00:20:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:42 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:42 Aux= 00:20:42 Message to Camera, serial 17839 queued 00:20:44 Received message from Master: op=Shutter serial=17843 00:20:44 Shutter LASER close 00:20:45 Received message from Master: op=PointingHead serial=17847 00:20:45 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) [UTC 2018-12-4 00:20:45] 00:20:45 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:20:45 Point started: ret=0 00:20:45 point_skyscan result=0 00:20:46 Check angles 00:20:46 SkyScan query 00:20:47 SkyScan query done: ret=0 az=89.94<-5996 ze=157.35<-1510 Statuses=0009 0009 00:20:47 Msec=0 True Az=89.94 Ze=157.35 Az status=0009 Ze status=0009 00:20:47 Check angles 00:20:47 SkyScan query 00:20:47 SkyScan query done: ret=0 az=72.165<-4811 ze=135.945<-2937 Statuses=0009 0009 00:20:47 Msec=750 True Az=72.165 Ze=135.945 Az status=0009 Ze status=0009 00:20:48 Check angles 00:20:48 SkyScan query 00:20:48 SkyScan query done: ret=0 az=54.705<-3647 ze=115.035<-4331 Statuses=0009 0009 00:20:48 Msec=1500 True Az=54.705 Ze=115.035 Az status=0009 Ze status=0009 00:20:48 Check angles 00:20:48 SkyScan query 00:20:49 SkyScan query done: ret=0 az=40.995<-2733 ze=93.6<-5760 Statuses=0009 0009 00:20:49 Msec=2250 True Az=40.995 Ze=93.6 Az status=0009 Ze status=0009 00:20:49 Check angles 00:20:49 SkyScan query 00:20:50 SkyScan query done: ret=0 az=40.995<-2733 ze=72.645<-7157 Statuses=0008 0009 00:20:50 Msec=3000 True Az=40.995 Ze=72.645 Az status=0008 Ze status=0009 00:20:50 Check angles 00:20:50 SkyScan query 00:20:50 SkyScan query done: ret=0 az=40.995<-2733 ze=52.365<-8509 Statuses=0008 0009 00:20:50 Msec=3750 True Az=40.995 Ze=52.365 Az status=0008 Ze status=0009 00:20:51 Check angles 00:20:51 SkyScan query 00:20:51 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:20:51 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:20:51 Message to Master queued w/err=0: serial=17847 error=0 00:20:56 Received message from Master: op=Filter serial=17848 00:20:56 Color wheel filter change from 0 to 0 00:20:56 FLIGetFilterPos err=0 currentPosition=0 00:20:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:20:56 Filter is already there-color wheel unchanged 00:20:56 Received message from Master: op=Shutter serial=17849 00:20:56 Shutter LASER close 00:20:57 Received message from Camera: op=State serial=17851 00:20:57 GetSingleValue result=40 Value=cccccccc 00:20:57 SkyScan query 00:20:57 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:20:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:57 Parameters OK 00:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:57 Set A/D data flow result=40 00:20:57 Set A/D channel type result=40 00:20:57 Set A/D encoding result=40 00:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:57 Set channel filter=0.000000e+000 result=40 00:20:57 Config A/D Result=40 00:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:57 Get A/D filter: -9.255963e+061 result=40 00:20:57 Get A/D value=-858993460 result=40 00:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:20:57 Parameters OK 00:20:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:20:57 Set A/D data flow result=40 00:20:57 Set A/D channel type result=40 00:20:57 Set A/D encoding result=40 00:20:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:20:57 Set channel filter=0.000000e+000 result=40 00:20:57 Config A/D Result=40 00:20:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:20:57 Get A/D filter: -9.255963e+061 result=40 00:20:57 Get A/D value=-858993460 result=40 00:20:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:20:57 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:20:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:20:57 Aux= 00:20:57 Message to Camera, serial 17851 queued 00:21:28 Received message from Master: op=PointingHead serial=17858 00:21:28 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:21:28 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:21:28 Point started: ret=0 00:21:28 point_skyscan result=0 00:21:29 Check angles 00:21:29 SkyScan query 00:21:30 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 00:21:30 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 00:21:30 Check angles 00:21:30 SkyScan query 00:21:30 SkyScan query done: ret=0 az=82.245<-5483 ze=66.495<-7567 Statuses=0009 0008 00:21:30 Msec=750 True Az=82.245 Ze=66.495 Az status=0009 Ze status=0008 00:21:31 Check angles 00:21:31 SkyScan query 00:21:31 SkyScan query done: ret=0 az=99.555<-6637 ze=66.495<-7567 Statuses=0009 0008 00:21:31 Msec=1500 True Az=99.555 Ze=66.495 Az status=0009 Ze status=0008 00:21:31 Check angles 00:21:31 SkyScan query 00:21:32 SkyScan query done: ret=0 az=117.345<-7823 ze=66.495<-7567 Statuses=0009 0008 00:21:32 Msec=2250 True Az=117.345 Ze=66.495 Az status=0009 Ze status=0008 00:21:32 Check angles 00:21:32 SkyScan query 00:21:33 SkyScan query done: ret=0 az=134.94<-8996 ze=66.495<-7567 Statuses=0009 0008 00:21:33 Msec=3000 True Az=134.94 Ze=66.495 Az status=0009 Ze status=0008 00:21:33 Check angles 00:21:33 SkyScan query 00:21:33 SkyScan query done: ret=0 az=152.19<-10146 ze=66.495<-7567 Statuses=0009 0008 00:21:33 Msec=3750 True Az=152.19 Ze=66.495 Az status=0009 Ze status=0008 00:21:34 Check angles 00:21:34 SkyScan query 00:21:34 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 00:21:34 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 00:21:34 Message to Master queued w/err=0: serial=17858 error=0 00:21:39 Received message from Master: op=Filter serial=17859 00:21:39 Color wheel filter change from 0 to 0 00:21:39 FLIGetFilterPos err=0 currentPosition=0 00:21:39 FLIGetStepsRemaining err=0 RemainingSteps=0 00:21:39 Filter is already there-color wheel unchanged 00:21:39 Received message from Master: op=Shutter serial=17860 00:21:39 Shutter LASER close 00:21:39 Received message from Camera: op=State serial=17862 00:21:39 GetSingleValue result=40 Value=cccccccc 00:21:39 SkyScan query 00:21:40 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:21:40 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:40 Parameters OK 00:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:40 Set A/D data flow result=40 00:21:40 Set A/D channel type result=40 00:21:40 Set A/D encoding result=40 00:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:40 Set channel filter=0.000000e+000 result=40 00:21:40 Config A/D Result=40 00:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:40 Get A/D filter: -9.255963e+061 result=40 00:21:40 Get A/D value=-858993460 result=40 00:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:40 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:21:40 Parameters OK 00:21:40 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:21:40 Set A/D data flow result=40 00:21:40 Set A/D channel type result=40 00:21:40 Set A/D encoding result=40 00:21:40 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:21:40 Set channel filter=0.000000e+000 result=40 00:21:40 Config A/D Result=40 00:21:40 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:21:40 Get A/D filter: -9.255963e+061 result=40 00:21:40 Get A/D value=-858993460 result=40 00:21:40 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:21:40 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:21:40 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:21:40 Aux= 00:21:40 Message to Camera, serial 17862 queued 00:22:11 Received message from Master: op=PointingHead serial=17869 00:22:11 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:22:11 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:22:11 Point started: ret=0 00:22:11 point_skyscan result=0 00:22:12 Check angles 00:22:12 SkyScan query 00:22:12 SkyScan query done: ret=0 az=134.73<-8982 ze=36.435<-9571 Statuses=0009 0009 00:22:12 Msec=0 True Az=134.73 Ze=36.435 Az status=0009 Ze status=0009 00:22:13 Check angles 00:22:13 SkyScan query 00:22:13 SkyScan query done: ret=0 az=117.21<-7814 ze=15.48<-10968 Statuses=0009 0009 00:22:13 Msec=750 True Az=117.21 Ze=15.48 Az status=0009 Ze status=0009 00:22:13 Check angles 00:22:13 SkyScan query 00:22:14 SkyScan query done: ret=0 az=99.855<-6657 ze=-5.505<-12367 Statuses=0009 0009 00:22:14 Msec=1500 True Az=99.855 Ze=-5.505 Az status=0009 Ze status=0009 00:22:14 Check angles 00:22:14 SkyScan query 00:22:15 SkyScan query done: ret=0 az=82.365<-5491 ze=-26.46<-13764 Statuses=0009 0009 00:22:15 Msec=2250 True Az=82.365 Ze=-26.46 Az status=0009 Ze status=0009 00:22:15 Check angles 00:22:15 SkyScan query 00:22:15 SkyScan query done: ret=0 az=64.92<-4328 ze=-38.565<-14571 Statuses=0009 0008 00:22:15 Msec=3000 True Az=64.92 Ze=-38.565 Az status=0009 Ze status=0008 00:22:16 Check angles 00:22:16 SkyScan query 00:22:16 SkyScan query done: ret=0 az=47.46<-3164 ze=-38.535<-14569 Statuses=0009 0008 00:22:16 Msec=3750 True Az=47.46 Ze=-38.535 Az status=0009 Ze status=0008 00:22:16 Check angles 00:22:16 SkyScan query 00:22:17 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:22:17 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:22:17 Message to Master queued w/err=0: serial=17869 error=0 00:22:22 Received message from Master: op=Filter serial=17870 00:22:22 Color wheel filter change from 0 to 0 00:22:22 FLIGetFilterPos err=0 currentPosition=0 00:22:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:22:22 Filter is already there-color wheel unchanged 00:22:22 Received message from Master: op=Shutter serial=17871 00:22:22 Shutter LASER close 00:22:22 Received message from Camera: op=State serial=17873 00:22:22 GetSingleValue result=40 Value=cccccccc 00:22:22 SkyScan query 00:22:23 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:22:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:23 Parameters OK 00:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:23 Set A/D data flow result=40 00:22:23 Set A/D channel type result=40 00:22:23 Set A/D encoding result=40 00:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:23 Set channel filter=0.000000e+000 result=40 00:22:23 Config A/D Result=40 00:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:23 Get A/D filter: -9.255963e+061 result=40 00:22:23 Get A/D value=-858993460 result=40 00:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:22:23 Parameters OK 00:22:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:22:23 Set A/D data flow result=40 00:22:23 Set A/D channel type result=40 00:22:23 Set A/D encoding result=40 00:22:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:22:23 Set channel filter=0.000000e+000 result=40 00:22:23 Config A/D Result=40 00:22:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:22:23 Get A/D filter: -9.255963e+061 result=40 00:22:23 Get A/D value=-858993460 result=40 00:22:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:22:23 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:22:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:22:23 Aux= 00:22:23 Message to Camera, serial 17873 queued 00:22:54 Received message from Master: op=PointingHead serial=17880 00:22:54 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:22:54 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:22:54 Point started: ret=0 00:22:54 point_skyscan result=0 00:22:55 Check angles 00:22:55 SkyScan query 00:22:55 SkyScan query done: ret=0 az=63.84<-4256 ze=-68.265<-16551 Statuses=0009 0009 00:22:55 Msec=0 True Az=63.84 Ze=-68.265 Az status=0009 Ze status=0009 00:22:55 Check angles 00:22:55 SkyScan query 00:22:56 SkyScan query done: ret=0 az=81.45<-5430 ze=-89.25<-17950 Statuses=0009 0009 00:22:56 Msec=750 True Az=81.45 Ze=-89.25 Az status=0009 Ze status=0009 00:22:56 Check angles 00:22:56 SkyScan query 00:22:57 SkyScan query done: ret=0 az=99<-6600 ze=-110.175<-19345 Statuses=0009 0009 00:22:57 Msec=1500 True Az=99 Ze=-110.175 Az status=0009 Ze status=0009 00:22:57 Check angles 00:22:57 SkyScan query 00:22:58 SkyScan query done: ret=0 az=116.34<-7756 ze=-131.145<-20743 Statuses=0009 0009 00:22:58 Msec=2250 True Az=116.34 Ze=-131.145 Az status=0009 Ze status=0009 00:22:58 Check angles 00:22:58 SkyScan query 00:22:58 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 00:22:58 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 00:22:58 Check angles 00:22:58 SkyScan query 00:22:59 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:22:59 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:22:59 Message to Master queued w/err=0: serial=17880 error=0 00:23:04 Received message from Master: op=Filter serial=17881 00:23:04 Color wheel filter change from 0 to 0 00:23:04 FLIGetFilterPos err=0 currentPosition=0 00:23:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:04 Filter is already there-color wheel unchanged 00:23:04 Received message from Master: op=Shutter serial=17882 00:23:04 Shutter LASER close 00:23:04 Received message from Camera: op=State serial=17884 00:23:04 GetSingleValue result=40 Value=cccccccc 00:23:04 SkyScan query 00:23:05 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:23:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:05 Parameters OK 00:23:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:05 Set A/D data flow result=40 00:23:05 Set A/D channel type result=40 00:23:05 Set A/D encoding result=40 00:23:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:05 Set channel filter=0.000000e+000 result=40 00:23:05 Config A/D Result=40 00:23:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:05 Get A/D filter: -9.255963e+061 result=40 00:23:05 Get A/D value=-858993460 result=40 00:23:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:05 Parameters OK 00:23:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:05 Set A/D data flow result=40 00:23:05 Set A/D channel type result=40 00:23:05 Set A/D encoding result=40 00:23:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:05 Set channel filter=0.000000e+000 result=40 00:23:05 Config A/D Result=40 00:23:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:05 Get A/D filter: -9.255963e+061 result=40 00:23:05 Get A/D value=-858993460 result=40 00:23:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:05 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:05 Aux= 00:23:05 Message to Camera, serial 17884 queued 00:23:36 Received message from Master: op=PointingHead serial=17891 00:23:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:23:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:23:36 Point started: ret=0 00:23:36 point_skyscan result=0 00:23:37 Check angles 00:23:37 SkyScan query 00:23:37 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.48<-23432 Statuses=0009 0009 00:23:37 Msec=0 True Az=113.01 Ze=-171.48 Az status=0009 Ze status=0009 00:23:38 Check angles 00:23:38 SkyScan query 00:23:38 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:23:38 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:23:38 Message to Master queued w/err=0: serial=17891 error=0 00:23:43 Received message from Master: op=Filter serial=17892 00:23:43 Color wheel filter change from 0 to 0 00:23:43 FLIGetFilterPos err=0 currentPosition=0 00:23:43 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:43 Filter is already there-color wheel unchanged 00:23:43 Received message from Master: op=Shutter serial=17893 00:23:43 Shutter LASER open 00:23:43 Received message from Camera: op=State serial=17895 00:23:43 GetSingleValue result=40 Value=cccccccc 00:23:43 SkyScan query 00:23:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:23:44 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:44 Parameters OK 00:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:44 Set A/D data flow result=40 00:23:44 Set A/D channel type result=40 00:23:44 Set A/D encoding result=40 00:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:44 Set channel filter=0.000000e+000 result=40 00:23:44 Config A/D Result=40 00:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:44 Get A/D filter: -9.255963e+061 result=40 00:23:44 Get A/D value=-858993460 result=40 00:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:44 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:44 Parameters OK 00:23:44 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:44 Set A/D data flow result=40 00:23:44 Set A/D channel type result=40 00:23:44 Set A/D encoding result=40 00:23:44 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:44 Set channel filter=0.000000e+000 result=40 00:23:44 Config A/D Result=40 00:23:44 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:44 Get A/D filter: -9.255963e+061 result=40 00:23:44 Get A/D value=-858993460 result=40 00:23:44 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:44 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:44 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:44 Aux= 00:23:44 Message to Camera, serial 17895 queued 00:23:46 Received message from Master: op=Shutter serial=17899 00:23:46 Shutter LASER close 00:23:47 Received message from Master: op=PointingHead serial=17903 00:23:47 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:23:47 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:23:47 Point started: ret=0 00:23:47 point_skyscan result=0 00:23:48 Check angles 00:23:48 SkyScan query 00:23:49 SkyScan query done: ret=0 az=135.78<-9052 ze=-143.4<-21560 Statuses=0009 0009 00:23:49 Msec=0 True Az=135.78 Ze=-143.4 Az status=0009 Ze status=0009 00:23:49 Check angles 00:23:49 SkyScan query 00:23:50 SkyScan query done: ret=0 az=153.675<-10245 ze=-121.995<-20133 Statuses=0009 0009 00:23:50 Msec=750 True Az=153.675 Ze=-121.995 Az status=0009 Ze status=0009 00:23:50 Check angles 00:23:50 SkyScan query 00:23:50 SkyScan query done: ret=0 az=171.075<-11405 ze=-101.07<-18738 Statuses=0009 0009 00:23:50 Msec=1500 True Az=171.075 Ze=-101.07 Az status=0009 Ze status=0009 00:23:50 Check angles 00:23:50 SkyScan query 00:23:51 SkyScan query done: ret=0 az=176.01<-11734 ze=-80.13<-17342 Statuses=0008 0009 00:23:51 Msec=2250 True Az=176.01 Ze=-80.13 Az status=0008 Ze status=0009 00:23:51 Check angles 00:23:51 SkyScan query 00:23:52 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.71<-15914 Statuses=0008 0009 00:23:52 Msec=3000 True Az=175.995 Ze=-58.71 Az status=0008 Ze status=0009 00:23:52 Check angles 00:23:52 SkyScan query 00:23:53 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:23:53 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:23:53 Message to Master queued w/err=0: serial=17903 error=0 00:23:58 Received message from Master: op=Filter serial=17904 00:23:58 Color wheel filter change from 0 to 0 00:23:58 FLIGetFilterPos err=0 currentPosition=0 00:23:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:23:58 Filter is already there-color wheel unchanged 00:23:58 Received message from Master: op=Shutter serial=17905 00:23:58 Shutter LASER close 00:23:58 Received message from Camera: op=State serial=17907 00:23:58 GetSingleValue result=40 Value=cccccccc 00:23:58 SkyScan query 00:23:58 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:23:58 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:58 Parameters OK 00:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:58 Set A/D data flow result=40 00:23:58 Set A/D channel type result=40 00:23:58 Set A/D encoding result=40 00:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:58 Set channel filter=0.000000e+000 result=40 00:23:58 Config A/D Result=40 00:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:58 Get A/D filter: -9.255963e+061 result=40 00:23:58 Get A/D value=-858993460 result=40 00:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:58 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:23:58 Parameters OK 00:23:58 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:23:58 Set A/D data flow result=40 00:23:58 Set A/D channel type result=40 00:23:58 Set A/D encoding result=40 00:23:58 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:23:58 Set channel filter=0.000000e+000 result=40 00:23:58 Config A/D Result=40 00:23:58 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:23:58 Get A/D filter: -9.255963e+061 result=40 00:23:58 Get A/D value=-858993460 result=40 00:23:58 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:23:58 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:23:58 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:23:58 Aux= 00:23:58 Message to Camera, serial 17907 queued 00:24:29 Received message from Master: op=PointingHead serial=17914 00:24:29 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:24:29 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:24:30 Point started: ret=0 00:24:30 point_skyscan result=0 00:24:30 Check angles 00:24:30 SkyScan query 00:24:31 SkyScan query done: ret=0 az=152.775<-10185 ze=-21.63<-13442 Statuses=0009 0009 00:24:31 Msec=0 True Az=152.775 Ze=-21.63 Az status=0009 Ze status=0009 00:24:31 Check angles 00:24:31 SkyScan query 00:24:32 SkyScan query done: ret=0 az=135.45<-9030 ze=-0.645<-12043 Statuses=0009 0009 00:24:32 Msec=750 True Az=135.45 Ze=-0.645 Az status=0009 Ze status=0009 00:24:32 Check angles 00:24:32 SkyScan query 00:24:32 SkyScan query done: ret=0 az=117.81<-7854 ze=20.295<-10647 Statuses=0009 0009 00:24:32 Msec=1500 True Az=117.81 Ze=20.295 Az status=0009 Ze status=0009 00:24:33 Check angles 00:24:33 SkyScan query 00:24:33 SkyScan query done: ret=0 az=100.425<-6695 ze=41.235<-9251 Statuses=0009 0009 00:24:33 Msec=2250 True Az=100.425 Ze=41.235 Az status=0009 Ze status=0009 00:24:33 Check angles 00:24:33 SkyScan query 00:24:34 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:24:34 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:24:34 Check angles 00:24:34 SkyScan query 00:24:35 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:24:35 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:24:35 Message to Master queued w/err=0: serial=17914 error=0 00:24:40 Received message from Master: op=Filter serial=17915 00:24:40 Color wheel filter change from 0 to 0 00:24:40 FLIGetFilterPos err=0 currentPosition=0 00:24:40 FLIGetStepsRemaining err=0 RemainingSteps=0 00:24:40 Filter is already there-color wheel unchanged 00:24:40 Received message from Master: op=Shutter serial=17916 00:24:40 Shutter LASER close 00:24:40 Received message from Camera: op=State serial=17918 00:24:40 GetSingleValue result=40 Value=cccccccc 00:24:40 SkyScan query 00:24:41 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:24:41 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:41 Parameters OK 00:24:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:41 Set A/D data flow result=40 00:24:41 Set A/D channel type result=40 00:24:41 Set A/D encoding result=40 00:24:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:41 Set channel filter=0.000000e+000 result=40 00:24:41 Config A/D Result=40 00:24:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:41 Get A/D filter: -9.255963e+061 result=40 00:24:41 Get A/D value=-858993460 result=40 00:24:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:41 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:24:41 Parameters OK 00:24:41 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:24:41 Set A/D data flow result=40 00:24:41 Set A/D channel type result=40 00:24:41 Set A/D encoding result=40 00:24:41 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:24:41 Set channel filter=0.000000e+000 result=40 00:24:41 Config A/D Result=40 00:24:41 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:24:41 Get A/D filter: -9.255963e+061 result=40 00:24:41 Get A/D value=-858993460 result=40 00:24:41 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:24:41 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:24:41 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:24:41 Aux= 00:24:41 Message to Camera, serial 17918 queued 00:25:11 Received message from Master: op=PointingHead serial=17925 00:25:11 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:25:11 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:25:12 Point started: ret=0 00:25:12 point_skyscan result=0 00:25:12 Check angles 00:25:12 SkyScan query 00:25:13 SkyScan query done: ret=0 az=108.765<-7251 ze=38.49<-9434 Statuses=0009 0008 00:25:13 Msec=0 True Az=108.765 Ze=38.49 Az status=0009 Ze status=0008 00:25:13 Check angles 00:25:13 SkyScan query 00:25:14 SkyScan query done: ret=0 az=126.3<-8420 ze=38.505<-9433 Statuses=0009 0008 00:25:14 Msec=750 True Az=126.3 Ze=38.505 Az status=0009 Ze status=0008 00:25:14 Check angles 00:25:14 SkyScan query 00:25:15 SkyScan query done: ret=0 az=144.045<-9603 ze=38.505<-9433 Statuses=0009 0008 00:25:15 Msec=1500 True Az=144.045 Ze=38.505 Az status=0009 Ze status=0008 00:25:15 Check angles 00:25:15 SkyScan query 00:25:15 SkyScan query done: ret=0 az=161.82<-10788 ze=38.505<-9433 Statuses=0009 0008 00:25:15 Msec=2250 True Az=161.82 Ze=38.505 Az status=0009 Ze status=0008 00:25:15 Check angles 00:25:15 SkyScan query 00:25:16 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0009 0008 00:25:16 Msec=3000 True Az=175.995 Ze=38.505 Az status=0009 Ze status=0008 00:25:16 Check angles 00:25:16 SkyScan query 00:25:17 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:25:17 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:25:17 Message to Master queued w/err=0: serial=17925 error=0 00:25:22 Received message from Master: op=Filter serial=17926 00:25:22 Color wheel filter change from 0 to 0 00:25:22 FLIGetFilterPos err=0 currentPosition=0 00:25:22 FLIGetStepsRemaining err=0 RemainingSteps=0 00:25:22 Filter is already there-color wheel unchanged 00:25:22 Received message from Master: op=Shutter serial=17927 00:25:22 Shutter LASER close 00:25:22 Received message from Camera: op=State serial=17929 00:25:22 GetSingleValue result=40 Value=cccccccc 00:25:22 SkyScan query 00:25:23 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:25:23 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:23 Parameters OK 00:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:23 Set A/D data flow result=40 00:25:23 Set A/D channel type result=40 00:25:23 Set A/D encoding result=40 00:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:23 Set channel filter=0.000000e+000 result=40 00:25:23 Config A/D Result=40 00:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:23 Get A/D filter: -9.255963e+061 result=40 00:25:23 Get A/D value=-858993460 result=40 00:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:23 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:25:23 Parameters OK 00:25:23 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:25:23 Set A/D data flow result=40 00:25:23 Set A/D channel type result=40 00:25:23 Set A/D encoding result=40 00:25:23 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:25:23 Set channel filter=0.000000e+000 result=40 00:25:23 Config A/D Result=40 00:25:23 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:25:23 Get A/D filter: -9.255963e+061 result=40 00:25:23 Get A/D value=-858993460 result=40 00:25:23 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:25:23 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:25:23 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:25:23 Aux= 00:25:23 Message to Camera, serial 17929 queued 00:25:53 Received message from Master: op=PointingHead serial=17936 00:25:53 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:25:53 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:25:54 Point started: ret=0 00:25:54 point_skyscan result=0 00:25:55 Check angles 00:25:55 SkyScan query 00:25:55 SkyScan query done: ret=0 az=152.925<-10195 ze=8.565<-11429 Statuses=0009 0009 00:25:55 Msec=0 True Az=152.925 Ze=8.565 Az status=0009 Ze status=0009 00:25:55 Check angles 00:25:55 SkyScan query 00:25:56 SkyScan query done: ret=0 az=135.45<-9030 ze=-12.375<-12825 Statuses=0009 0009 00:25:56 Msec=750 True Az=135.45 Ze=-12.375 Az status=0009 Ze status=0009 00:25:56 Check angles 00:25:56 SkyScan query 00:25:57 SkyScan query done: ret=0 az=117.825<-7855 ze=-33.33<-14222 Statuses=0009 0009 00:25:57 Msec=1500 True Az=117.825 Ze=-33.33 Az status=0009 Ze status=0009 00:25:57 Check angles 00:25:57 SkyScan query 00:25:57 SkyScan query done: ret=0 az=100.17<-6678 ze=-51.54<-15436 Statuses=0009 0009 00:25:57 Msec=2250 True Az=100.17 Ze=-51.54 Az status=0009 Ze status=0009 00:25:58 Check angles 00:25:58 SkyScan query 00:25:58 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 00:25:58 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 00:25:58 Check angles 00:25:58 SkyScan query 00:25:59 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:25:59 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:25:59 Message to Master queued w/err=0: serial=17936 error=0 00:26:04 Received message from Master: op=Filter serial=17937 00:26:04 Color wheel filter change from 0 to 0 00:26:04 FLIGetFilterPos err=0 currentPosition=0 00:26:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:04 Filter is already there-color wheel unchanged 00:26:04 Received message from Master: op=Shutter serial=17938 00:26:04 Shutter LASER close 00:26:04 Received message from Camera: op=State serial=17940 00:26:04 GetSingleValue result=40 Value=cccccccc 00:26:04 SkyScan query 00:26:05 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:26:05 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:05 Parameters OK 00:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:05 Set A/D data flow result=40 00:26:05 Set A/D channel type result=40 00:26:05 Set A/D encoding result=40 00:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:05 Set channel filter=0.000000e+000 result=40 00:26:05 Config A/D Result=40 00:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:05 Get A/D filter: -9.255963e+061 result=40 00:26:05 Get A/D value=-858993460 result=40 00:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:05 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:05 Parameters OK 00:26:05 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:05 Set A/D data flow result=40 00:26:05 Set A/D channel type result=40 00:26:05 Set A/D encoding result=40 00:26:05 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:05 Set channel filter=0.000000e+000 result=40 00:26:05 Config A/D Result=40 00:26:05 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:05 Get A/D filter: -9.255963e+061 result=40 00:26:05 Get A/D value=-858993460 result=40 00:26:05 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:05 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:05 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:05 Aux= 00:26:05 Message to Camera, serial 17940 queued 00:26:36 Received message from Master: op=PointingHead serial=17947 00:26:36 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:26:36 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:26:36 Point started: ret=0 00:26:36 point_skyscan result=0 00:26:37 Check angles 00:26:37 SkyScan query 00:26:37 SkyScan query done: ret=0 az=109.395<-7293 ze=-81.69<-17446 Statuses=0009 0009 00:26:37 Msec=0 True Az=109.395 Ze=-81.69 Az status=0009 Ze status=0009 00:26:37 Check angles 00:26:37 SkyScan query 00:26:38 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.66<-18844 Statuses=0008 0009 00:26:38 Msec=750 True Az=113.01 Ze=-102.66 Az status=0008 Ze status=0009 00:26:38 Check angles 00:26:38 SkyScan query 00:26:39 SkyScan query done: ret=0 az=113.01<-7534 ze=-123.585<-20239 Statuses=0008 0009 00:26:39 Msec=1500 True Az=113.01 Ze=-123.585 Az status=0008 Ze status=0009 00:26:39 Check angles 00:26:39 SkyScan query 00:26:39 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.555<-21637 Statuses=0008 0009 00:26:39 Msec=2250 True Az=112.995 Ze=-144.555 Az status=0008 Ze status=0009 00:26:40 Check angles 00:26:40 SkyScan query 00:26:40 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.465<-23031 Statuses=0008 0009 00:26:40 Msec=3000 True Az=112.995 Ze=-165.465 Az status=0008 Ze status=0009 00:26:40 Check angles 00:26:40 SkyScan query 00:26:41 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:26:41 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:26:41 Message to Master queued w/err=0: serial=17947 error=0 00:26:46 Received message from Master: op=Filter serial=17948 00:26:46 Color wheel filter change from 0 to 0 00:26:46 FLIGetFilterPos err=0 currentPosition=0 00:26:46 FLIGetStepsRemaining err=0 RemainingSteps=0 00:26:46 Filter is already there-color wheel unchanged 00:26:46 Received message from Master: op=Shutter serial=17949 00:26:46 Shutter LASER open 00:26:46 Received message from Camera: op=State serial=17951 00:26:46 GetSingleValue result=40 Value=cccccccc 00:26:46 SkyScan query 00:26:47 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:26:47 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:47 Parameters OK 00:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:47 Set A/D data flow result=40 00:26:47 Set A/D channel type result=40 00:26:47 Set A/D encoding result=40 00:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:47 Set channel filter=0.000000e+000 result=40 00:26:47 Config A/D Result=40 00:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:47 Get A/D filter: -9.255963e+061 result=40 00:26:47 Get A/D value=-858993460 result=40 00:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:47 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:26:47 Parameters OK 00:26:47 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:26:47 Set A/D data flow result=40 00:26:47 Set A/D channel type result=40 00:26:47 Set A/D encoding result=40 00:26:47 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:26:47 Set channel filter=0.000000e+000 result=40 00:26:47 Config A/D Result=40 00:26:47 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:26:47 Get A/D filter: -9.255963e+061 result=40 00:26:47 Get A/D value=-858993460 result=40 00:26:47 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:26:47 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:26:47 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:26:47 Aux= 00:26:47 Message to Camera, serial 17951 queued 00:26:49 Received message from Master: op=Shutter serial=17955 00:26:49 Shutter LASER close 00:26:50 Received message from Master: op=PointingHead serial=17959 00:26:50 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:26:50 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:26:50 Point started: ret=0 00:26:50 point_skyscan result=0 00:26:51 Check angles 00:26:51 SkyScan query 00:26:51 SkyScan query done: ret=0 az=90.195<-6013 ze=157.47<-1502 Statuses=0009 0009 00:26:51 Msec=0 True Az=90.195 Ze=157.47 Az status=0009 Ze status=0009 00:26:52 Check angles 00:26:52 SkyScan query 00:26:52 SkyScan query done: ret=0 az=72.315<-4821 ze=136.065<-2929 Statuses=0009 0009 00:26:52 Msec=750 True Az=72.315 Ze=136.065 Az status=0009 Ze status=0009 00:26:52 Check angles 00:26:52 SkyScan query 00:26:53 SkyScan query done: ret=0 az=54.9<-3660 ze=115.11<-4326 Statuses=0009 0009 00:26:53 Msec=1500 True Az=54.9 Ze=115.11 Az status=0009 Ze status=0009 00:26:53 Check angles 00:26:53 SkyScan query 00:26:54 SkyScan query done: ret=0 az=41.025<-2735 ze=94.155<-5723 Statuses=0009 0009 00:26:54 Msec=2250 True Az=41.025 Ze=94.155 Az status=0009 Ze status=0009 00:26:54 Check angles 00:26:54 SkyScan query 00:26:54 SkyScan query done: ret=0 az=40.995<-2733 ze=73.2<-7120 Statuses=0008 0009 00:26:54 Msec=3000 True Az=40.995 Ze=73.2 Az status=0008 Ze status=0009 00:26:55 Check angles 00:26:55 SkyScan query 00:26:55 SkyScan query done: ret=0 az=40.995<-2733 ze=52.695<-8487 Statuses=0008 0009 00:26:55 Msec=3750 True Az=40.995 Ze=52.695 Az status=0008 Ze status=0009 00:26:55 Check angles 00:26:55 SkyScan query 00:26:56 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:26:56 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:26:56 Message to Master queued w/err=0: serial=17959 error=0 00:27:01 Received message from Master: op=Filter serial=17960 00:27:01 Color wheel filter change from 0 to 0 00:27:01 FLIGetFilterPos err=0 currentPosition=0 00:27:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:01 Filter is already there-color wheel unchanged 00:27:01 Received message from Master: op=Shutter serial=17961 00:27:01 Shutter LASER close 00:27:01 Received message from Camera: op=State serial=17963 00:27:01 GetSingleValue result=40 Value=cccccccc 00:27:01 SkyScan query 00:27:02 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:27:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:02 Parameters OK 00:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:02 Set A/D data flow result=40 00:27:02 Set A/D channel type result=40 00:27:02 Set A/D encoding result=40 00:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:02 Set channel filter=0.000000e+000 result=40 00:27:02 Config A/D Result=40 00:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:02 Get A/D filter: -9.255963e+061 result=40 00:27:02 Get A/D value=-858993460 result=40 00:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:02 Parameters OK 00:27:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:02 Set A/D data flow result=40 00:27:02 Set A/D channel type result=40 00:27:02 Set A/D encoding result=40 00:27:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:02 Set channel filter=0.000000e+000 result=40 00:27:02 Config A/D Result=40 00:27:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:02 Get A/D filter: -9.255963e+061 result=40 00:27:02 Get A/D value=-858993460 result=40 00:27:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:02 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:02 Aux= 00:27:02 Message to Camera, serial 17963 queued 00:27:33 Received message from Master: op=PointingHead serial=17970 00:27:33 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:27:33 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:27:33 Point started: ret=0 00:27:33 point_skyscan result=0 00:27:34 Check angles 00:27:34 SkyScan query 00:27:34 SkyScan query done: ret=0 az=64.275<-4285 ze=66.54<-7564 Statuses=0009 0008 00:27:34 Msec=0 True Az=64.275 Ze=66.54 Az status=0009 Ze status=0008 00:27:35 Check angles 00:27:35 SkyScan query 00:27:35 SkyScan query done: ret=0 az=82.455<-5497 ze=66.51<-7566 Statuses=0009 0008 00:27:35 Msec=750 True Az=82.455 Ze=66.51 Az status=0009 Ze status=0008 00:27:35 Check angles 00:27:35 SkyScan query 00:27:36 SkyScan query done: ret=0 az=99.72<-6648 ze=66.495<-7567 Statuses=0009 0008 00:27:36 Msec=1500 True Az=99.72 Ze=66.495 Az status=0009 Ze status=0008 00:27:36 Check angles 00:27:36 SkyScan query 00:27:37 SkyScan query done: ret=0 az=117.135<-7809 ze=66.495<-7567 Statuses=0009 0008 00:27:37 Msec=2250 True Az=117.135 Ze=66.495 Az status=0009 Ze status=0008 00:27:37 Check angles 00:27:37 SkyScan query 00:27:37 SkyScan query done: ret=0 az=135.075<-9005 ze=66.495<-7567 Statuses=0009 0008 00:27:37 Msec=3000 True Az=135.075 Ze=66.495 Az status=0009 Ze status=0008 00:27:38 Check angles 00:27:38 SkyScan query 00:27:38 SkyScan query done: ret=0 az=152.37<-10158 ze=66.495<-7567 Statuses=0009 0008 00:27:38 Msec=3750 True Az=152.37 Ze=66.495 Az status=0009 Ze status=0008 00:27:38 Check angles 00:27:38 SkyScan query 00:27:39 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:27:39 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:27:39 Message to Master queued w/err=0: serial=17970 error=0 00:27:44 Received message from Master: op=Filter serial=17971 00:27:44 Color wheel filter change from 0 to 0 00:27:44 FLIGetFilterPos err=0 currentPosition=0 00:27:44 FLIGetStepsRemaining err=0 RemainingSteps=0 00:27:44 Filter is already there-color wheel unchanged 00:27:44 Received message from Master: op=Shutter serial=17972 00:27:44 Shutter LASER close 00:27:44 Received message from Camera: op=State serial=17974 00:27:44 GetSingleValue result=40 Value=cccccccc 00:27:44 SkyScan query 00:27:45 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:27:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:45 Parameters OK 00:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:45 Set A/D data flow result=40 00:27:45 Set A/D channel type result=40 00:27:45 Set A/D encoding result=40 00:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:45 Set channel filter=0.000000e+000 result=40 00:27:45 Config A/D Result=40 00:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:45 Get A/D filter: -9.255963e+061 result=40 00:27:45 Get A/D value=-858993460 result=40 00:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:27:45 Parameters OK 00:27:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:27:45 Set A/D data flow result=40 00:27:45 Set A/D channel type result=40 00:27:45 Set A/D encoding result=40 00:27:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:27:45 Set channel filter=0.000000e+000 result=40 00:27:45 Config A/D Result=40 00:27:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:27:45 Get A/D filter: -9.255963e+061 result=40 00:27:45 Get A/D value=-858993460 result=40 00:27:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:27:45 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:27:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:27:45 Aux= 00:27:45 Message to Camera, serial 17974 queued 00:28:16 Received message from Master: op=PointingHead serial=17981 00:28:16 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:28:16 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:28:16 Point started: ret=0 00:28:16 point_skyscan result=0 00:28:17 Check angles 00:28:17 SkyScan query 00:28:17 SkyScan query done: ret=0 az=134.58<-8972 ze=36.15<-9590 Statuses=0009 0009 00:28:17 Msec=0 True Az=134.58 Ze=36.15 Az status=0009 Ze status=0009 00:28:18 Check angles 00:28:18 SkyScan query 00:28:18 SkyScan query done: ret=0 az=116.595<-7773 ze=14.79<-11014 Statuses=0009 0009 00:28:18 Msec=750 True Az=116.595 Ze=14.79 Az status=0009 Ze status=0009 00:28:18 Check angles 00:28:18 SkyScan query 00:28:19 SkyScan query done: ret=0 az=99.225<-6615 ze=-6.165<-12411 Statuses=0009 0009 00:28:19 Msec=1500 True Az=99.225 Ze=-6.165 Az status=0009 Ze status=0009 00:28:19 Check angles 00:28:19 SkyScan query 00:28:20 SkyScan query done: ret=0 az=81.75<-5450 ze=-27.135<-13809 Statuses=0009 0009 00:28:20 Msec=2250 True Az=81.75 Ze=-27.135 Az status=0009 Ze status=0009 00:28:20 Check angles 00:28:20 SkyScan query 00:28:20 SkyScan query done: ret=0 az=64.26<-4284 ze=-38.565<-14571 Statuses=0009 0008 00:28:20 Msec=3000 True Az=64.26 Ze=-38.565 Az status=0009 Ze status=0008 00:28:21 Check angles 00:28:21 SkyScan query 00:28:21 SkyScan query done: ret=0 az=46.8<-3120 ze=-38.535<-14569 Statuses=0009 0008 00:28:21 Msec=3750 True Az=46.8 Ze=-38.535 Az status=0009 Ze status=0008 00:28:21 Check angles 00:28:21 SkyScan query 00:28:22 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:28:22 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:28:22 Message to Master queued w/err=0: serial=17981 error=0 00:28:27 Received message from Master: op=Filter serial=17982 00:28:27 Color wheel filter change from 0 to 0 00:28:27 FLIGetFilterPos err=0 currentPosition=0 00:28:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:28:27 Filter is already there-color wheel unchanged 00:28:27 Received message from Master: op=Shutter serial=17983 00:28:27 Shutter LASER close 00:28:27 Received message from Camera: op=State serial=17985 00:28:27 GetSingleValue result=40 Value=cccccccc 00:28:27 SkyScan query 00:28:28 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:28:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:28 Parameters OK 00:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:28 Set A/D data flow result=40 00:28:28 Set A/D channel type result=40 00:28:28 Set A/D encoding result=40 00:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:28 Set channel filter=0.000000e+000 result=40 00:28:28 Config A/D Result=40 00:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:28 Get A/D filter: -9.255963e+061 result=40 00:28:28 Get A/D value=-858993460 result=40 00:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:28:28 Parameters OK 00:28:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:28:28 Set A/D data flow result=40 00:28:28 Set A/D channel type result=40 00:28:28 Set A/D encoding result=40 00:28:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:28:28 Set channel filter=0.000000e+000 result=40 00:28:28 Config A/D Result=40 00:28:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:28:28 Get A/D filter: -9.255963e+061 result=40 00:28:28 Get A/D value=-858993460 result=40 00:28:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:28:28 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:28:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:28:28 Aux= 00:28:28 Message to Camera, serial 17985 queued 00:28:58 Received message from Master: op=PointingHead serial=17992 00:28:58 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:28:58 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:28:59 Point started: ret=0 00:28:59 point_skyscan result=0 00:29:00 Check angles 00:29:00 SkyScan query 00:29:00 SkyScan query done: ret=0 az=63.885<-4259 ze=-68.295<-16553 Statuses=0009 0009 00:29:00 Msec=0 True Az=63.885 Ze=-68.295 Az status=0009 Ze status=0009 00:29:00 Check angles 00:29:00 SkyScan query 00:29:01 SkyScan query done: ret=0 az=81.465<-5431 ze=-89.265<-17951 Statuses=0009 0009 00:29:01 Msec=750 True Az=81.465 Ze=-89.265 Az status=0009 Ze status=0009 00:29:01 Check angles 00:29:01 SkyScan query 00:29:02 SkyScan query done: ret=0 az=99.33<-6622 ze=-110.64<-19376 Statuses=0009 0009 00:29:02 Msec=1500 True Az=99.33 Ze=-110.64 Az status=0009 Ze status=0009 00:29:02 Check angles 00:29:02 SkyScan query 00:29:02 SkyScan query done: ret=0 az=116.76<-7784 ze=-131.595<-20773 Statuses=0009 0009 00:29:02 Msec=2250 True Az=116.76 Ze=-131.595 Az status=0009 Ze status=0009 00:29:03 Check angles 00:29:03 SkyScan query 00:29:03 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.54<-21436 Statuses=0009 0008 00:29:03 Msec=3000 True Az=131.085 Ze=-141.54 Az status=0009 Ze status=0008 00:29:03 Check angles 00:29:03 SkyScan query 00:29:04 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:29:04 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:29:04 Message to Master queued w/err=0: serial=17992 error=0 00:29:09 Received message from Master: op=Filter serial=17993 00:29:09 Color wheel filter change from 0 to 0 00:29:09 FLIGetFilterPos err=0 currentPosition=0 00:29:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:09 Filter is already there-color wheel unchanged 00:29:09 Received message from Master: op=Shutter serial=17994 00:29:09 Shutter LASER close 00:29:09 Received message from Camera: op=State serial=17996 00:29:09 GetSingleValue result=40 Value=cccccccc 00:29:09 SkyScan query 00:29:10 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:29:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:10 Parameters OK 00:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:10 Set A/D data flow result=40 00:29:10 Set A/D channel type result=40 00:29:10 Set A/D encoding result=40 00:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:10 Set channel filter=0.000000e+000 result=40 00:29:10 Config A/D Result=40 00:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:10 Get A/D filter: -9.255963e+061 result=40 00:29:10 Get A/D value=-858993460 result=40 00:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:10 Parameters OK 00:29:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:10 Set A/D data flow result=40 00:29:10 Set A/D channel type result=40 00:29:10 Set A/D encoding result=40 00:29:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:10 Set channel filter=0.000000e+000 result=40 00:29:10 Config A/D Result=40 00:29:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:10 Get A/D filter: -9.255963e+061 result=40 00:29:10 Get A/D value=-858993460 result=40 [UTC 2018-12-4 00:29:10] 00:29:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:10 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:10 Aux= 00:29:10 Message to Camera, serial 17996 queued 00:29:41 Received message from Master: op=PointingHead serial=18003 00:29:41 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:29:41 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:29:41 Point started: ret=0 00:29:41 point_skyscan result=0 00:29:42 Check angles 00:29:42 SkyScan query 00:29:42 SkyScan query done: ret=0 az=113.025<-7535 ze=-171.39<-23426 Statuses=0009 0009 00:29:42 Msec=0 True Az=113.025 Ze=-171.39 Az status=0009 Ze status=0009 00:29:42 Check angles 00:29:42 SkyScan query 00:29:43 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:29:43 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:29:43 Message to Master queued w/err=0: serial=18003 error=0 00:29:48 Received message from Master: op=Filter serial=18004 00:29:48 Color wheel filter change from 0 to 0 00:29:48 FLIGetFilterPos err=0 currentPosition=0 00:29:48 FLIGetStepsRemaining err=0 RemainingSteps=0 00:29:48 Filter is already there-color wheel unchanged 00:29:48 Received message from Master: op=Shutter serial=18005 00:29:48 Shutter LASER open 00:29:48 Received message from Camera: op=State serial=18007 00:29:48 GetSingleValue result=40 Value=cccccccc 00:29:48 SkyScan query 00:29:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:29:49 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:49 Parameters OK 00:29:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:49 Set A/D data flow result=40 00:29:49 Set A/D channel type result=40 00:29:49 Set A/D encoding result=40 00:29:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:49 Set channel filter=0.000000e+000 result=40 00:29:49 Config A/D Result=40 00:29:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:49 Get A/D filter: -9.255963e+061 result=40 00:29:49 Get A/D value=-858993460 result=40 00:29:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:49 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:29:49 Parameters OK 00:29:49 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:29:49 Set A/D data flow result=40 00:29:49 Set A/D channel type result=40 00:29:49 Set A/D encoding result=40 00:29:49 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:29:49 Set channel filter=0.000000e+000 result=40 00:29:49 Config A/D Result=40 00:29:49 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:29:49 Get A/D filter: -9.255963e+061 result=40 00:29:49 Get A/D value=-858993460 result=40 00:29:49 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:29:49 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:29:49 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:29:49 Aux= 00:29:49 Message to Camera, serial 18007 queued 00:29:51 Received message from Master: op=Shutter serial=18011 00:29:51 Shutter LASER close 00:29:52 Received message from Master: op=PointingHead serial=18015 00:29:52 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:29:52 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:29:52 Point started: ret=0 00:29:52 point_skyscan result=0 00:29:53 Check angles 00:29:53 SkyScan query 00:29:54 SkyScan query done: ret=0 az=136.05<-9070 ze=-143.055<-21537 Statuses=0009 0009 00:29:54 Msec=0 True Az=136.05 Ze=-143.055 Az status=0009 Ze status=0009 00:29:54 Check angles 00:29:54 SkyScan query 00:29:54 SkyScan query done: ret=0 az=153.63<-10242 ze=-122.055<-20137 Statuses=0009 0009 00:29:54 Msec=750 True Az=153.63 Ze=-122.055 Az status=0009 Ze status=0009 00:29:55 Check angles 00:29:55 SkyScan query 00:29:55 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.145<-18743 Statuses=0009 0009 00:29:55 Msec=1500 True Az=171.015 Ze=-101.145 Az status=0009 Ze status=0009 00:29:55 Check angles 00:29:55 SkyScan query 00:29:56 SkyScan query done: ret=0 az=176.01<-11734 ze=-79.74<-17316 Statuses=0008 0009 00:29:56 Msec=2250 True Az=176.01 Ze=-79.74 Az status=0008 Ze status=0009 00:29:56 Check angles 00:29:56 SkyScan query 00:29:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-58.77<-15918 Statuses=0008 0009 00:29:57 Msec=3000 True Az=175.995 Ze=-58.77 Az status=0008 Ze status=0009 00:29:57 Check angles 00:29:57 SkyScan query 00:29:57 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:29:57 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:29:57 Message to Master queued w/err=0: serial=18015 error=0 00:30:02 Received message from Master: op=Filter serial=18016 00:30:02 Color wheel filter change from 0 to 0 00:30:02 FLIGetFilterPos err=0 currentPosition=0 00:30:02 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:02 Filter is already there-color wheel unchanged 00:30:03 Received message from Master: op=Shutter serial=18017 00:30:03 Shutter LASER close 00:30:03 Received message from Camera: op=State serial=18019 00:30:03 GetSingleValue result=40 Value=cccccccc 00:30:03 SkyScan query 00:30:03 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:30:03 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:03 Parameters OK 00:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:03 Set A/D data flow result=40 00:30:03 Set A/D channel type result=40 00:30:03 Set A/D encoding result=40 00:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:03 Set channel filter=0.000000e+000 result=40 00:30:03 Config A/D Result=40 00:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:03 Get A/D filter: -9.255963e+061 result=40 00:30:03 Get A/D value=-858993460 result=40 00:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:03 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:03 Parameters OK 00:30:03 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:03 Set A/D data flow result=40 00:30:03 Set A/D channel type result=40 00:30:03 Set A/D encoding result=40 00:30:03 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:03 Set channel filter=0.000000e+000 result=40 00:30:03 Config A/D Result=40 00:30:03 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:03 Get A/D filter: -9.255963e+061 result=40 00:30:03 Get A/D value=-858993460 result=40 00:30:03 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:03 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:03 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:03 Aux= 00:30:03 Message to Camera, serial 18019 queued 00:30:34 Received message from Master: op=PointingHead serial=18026 00:30:34 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:30:34 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:30:34 Point started: ret=0 00:30:34 point_skyscan result=0 00:30:35 Check angles 00:30:35 SkyScan query 00:30:36 SkyScan query done: ret=0 az=153.105<-10207 ze=-21.945<-13463 Statuses=0009 0009 00:30:36 Msec=0 True Az=153.105 Ze=-21.945 Az status=0009 Ze status=0009 00:30:36 Check angles 00:30:36 SkyScan query 00:30:37 SkyScan query done: ret=0 az=135.66<-9044 ze=-0.975<-12065 Statuses=0009 0009 00:30:37 Msec=750 True Az=135.66 Ze=-0.975 Az status=0009 Ze status=0009 00:30:37 Check angles 00:30:37 SkyScan query 00:30:37 SkyScan query done: ret=0 az=117.75<-7850 ze=20.415<-10639 Statuses=0009 0009 00:30:37 Msec=1500 True Az=117.75 Ze=20.415 Az status=0009 Ze status=0009 00:30:38 Check angles 00:30:38 SkyScan query 00:30:38 SkyScan query done: ret=0 az=100.005<-6667 ze=41.79<-9214 Statuses=0009 0009 00:30:38 Msec=2250 True Az=100.005 Ze=41.79 Az status=0009 Ze status=0009 00:30:38 Check angles 00:30:38 SkyScan query 00:30:39 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:30:39 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:30:39 Check angles 00:30:39 SkyScan query 00:30:40 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:30:40 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:30:40 Message to Master queued w/err=0: serial=18026 error=0 00:30:45 Received message from Master: op=Filter serial=18027 00:30:45 Color wheel filter change from 0 to 0 00:30:45 FLIGetFilterPos err=0 currentPosition=0 00:30:45 FLIGetStepsRemaining err=0 RemainingSteps=0 00:30:45 Filter is already there-color wheel unchanged 00:30:45 Received message from Master: op=Shutter serial=18028 00:30:45 Shutter LASER close 00:30:45 Received message from Camera: op=State serial=18030 00:30:45 GetSingleValue result=40 Value=cccccccc 00:30:45 SkyScan query 00:30:45 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:30:45 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:45 Parameters OK 00:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:45 Set A/D data flow result=40 00:30:45 Set A/D channel type result=40 00:30:45 Set A/D encoding result=40 00:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:45 Set channel filter=0.000000e+000 result=40 00:30:45 Config A/D Result=40 00:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:45 Get A/D filter: -9.255963e+061 result=40 00:30:45 Get A/D value=-858993460 result=40 00:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:45 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:30:45 Parameters OK 00:30:45 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:30:45 Set A/D data flow result=40 00:30:45 Set A/D channel type result=40 00:30:45 Set A/D encoding result=40 00:30:45 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:30:45 Set channel filter=0.000000e+000 result=40 00:30:45 Config A/D Result=40 00:30:45 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:30:45 Get A/D filter: -9.255963e+061 result=40 00:30:45 Get A/D value=-858993460 result=40 00:30:45 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:30:45 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:30:45 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:30:45 Aux= 00:30:45 Message to Camera, serial 18030 queued 00:31:16 Received message from Master: op=PointingHead serial=18037 00:31:16 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:31:16 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:31:17 Point started: ret=0 00:31:17 point_skyscan result=0 00:31:17 Check angles 00:31:17 SkyScan query 00:31:18 SkyScan query done: ret=0 az=108.795<-7253 ze=38.49<-9434 Statuses=0009 0008 00:31:18 Msec=0 True Az=108.795 Ze=38.49 Az status=0009 Ze status=0008 00:31:18 Check angles 00:31:18 SkyScan query 00:31:19 SkyScan query done: ret=0 az=126.42<-8428 ze=38.505<-9433 Statuses=0009 0008 00:31:19 Msec=750 True Az=126.42 Ze=38.505 Az status=0009 Ze status=0008 00:31:19 Check angles 00:31:19 SkyScan query 00:31:19 SkyScan query done: ret=0 az=143.745<-9583 ze=38.505<-9433 Statuses=0009 0008 00:31:19 Msec=1500 True Az=143.745 Ze=38.505 Az status=0009 Ze status=0008 00:31:20 Check angles 00:31:20 SkyScan query 00:31:20 SkyScan query done: ret=0 az=161.145<-10743 ze=38.505<-9433 Statuses=0009 0008 00:31:20 Msec=2250 True Az=161.145 Ze=38.505 Az status=0009 Ze status=0008 00:31:20 Check angles 00:31:20 SkyScan query 00:31:21 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 00:31:21 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 00:31:21 Check angles 00:31:21 SkyScan query 00:31:22 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:31:22 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:31:22 Message to Master queued w/err=0: serial=18037 error=0 00:31:27 Received message from Master: op=Filter serial=18038 00:31:27 Color wheel filter change from 0 to 0 00:31:27 FLIGetFilterPos err=0 currentPosition=0 00:31:27 FLIGetStepsRemaining err=0 RemainingSteps=0 00:31:27 Filter is already there-color wheel unchanged 00:31:27 Received message from Master: op=Shutter serial=18039 00:31:27 Shutter LASER close 00:31:27 Received message from Camera: op=State serial=18041 00:31:27 GetSingleValue result=40 Value=cccccccc 00:31:27 SkyScan query 00:31:28 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:31:28 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:28 Parameters OK 00:31:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:28 Set A/D data flow result=40 00:31:28 Set A/D channel type result=40 00:31:28 Set A/D encoding result=40 00:31:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:28 Set channel filter=0.000000e+000 result=40 00:31:28 Config A/D Result=40 00:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:28 Get A/D filter: -9.255963e+061 result=40 00:31:28 Get A/D value=-858993460 result=40 00:31:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:28 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:31:28 Parameters OK 00:31:28 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:31:28 Set A/D data flow result=40 00:31:28 Set A/D channel type result=40 00:31:28 Set A/D encoding result=40 00:31:28 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:31:28 Set channel filter=0.000000e+000 result=40 00:31:28 Config A/D Result=40 00:31:28 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:31:28 Get A/D filter: -9.255963e+061 result=40 00:31:28 Get A/D value=-858993460 result=40 00:31:28 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:31:28 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:31:28 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:31:28 Aux= 00:31:28 Message to Camera, serial 18041 queued 00:31:58 Received message from Master: op=PointingHead serial=18048 00:31:58 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:31:58 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:31:59 Point started: ret=0 00:31:59 point_skyscan result=0 00:31:59 Check angles 00:31:59 SkyScan query 00:32:00 SkyScan query done: ret=0 az=153.165<-10211 ze=8.895<-11407 Statuses=0009 0009 00:32:00 Msec=0 True Az=153.165 Ze=8.895 Az status=0009 Ze status=0009 00:32:00 Check angles 00:32:00 SkyScan query 00:32:01 SkyScan query done: ret=0 az=135.345<-9023 ze=-12.48<-12832 Statuses=0009 0009 00:32:01 Msec=750 True Az=135.345 Ze=-12.48 Az status=0009 Ze status=0009 00:32:01 Check angles 00:32:01 SkyScan query 00:32:02 SkyScan query done: ret=0 az=117.855<-7857 ze=-33.435<-14229 Statuses=0009 0009 00:32:02 Msec=1500 True Az=117.855 Ze=-33.435 Az status=0009 Ze status=0009 00:32:02 Check angles 00:32:02 SkyScan query 00:32:02 SkyScan query done: ret=0 az=100.47<-6698 ze=-51.54<-15436 Statuses=0009 0009 00:32:02 Msec=2250 True Az=100.47 Ze=-51.54 Az status=0009 Ze status=0009 00:32:02 Check angles 00:32:02 SkyScan query 00:32:03 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.525<-15435 Statuses=0009 0008 00:32:03 Msec=3000 True Az=86.025 Ze=-51.525 Az status=0009 Ze status=0008 00:32:03 Check angles 00:32:03 SkyScan query 00:32:04 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:32:04 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:32:04 Message to Master queued w/err=0: serial=18048 error=0 [UTC 2018-12-4 00:32:09] 00:32:09 Received message from Master: op=Filter serial=18049 00:32:09 Color wheel filter change from 0 to 0 00:32:09 FLIGetFilterPos err=0 currentPosition=0 00:32:09 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:09 Filter is already there-color wheel unchanged 00:32:09 Received message from Master: op=Shutter serial=18050 00:32:09 Shutter LASER close 00:32:09 Received message from Camera: op=State serial=18052 00:32:09 GetSingleValue result=40 Value=cccccccc 00:32:09 SkyScan query 00:32:10 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:32:10 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:10 Parameters OK 00:32:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:10 Set A/D data flow result=40 00:32:10 Set A/D channel type result=40 00:32:10 Set A/D encoding result=40 00:32:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:10 Set channel filter=0.000000e+000 result=40 00:32:10 Config A/D Result=40 00:32:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:10 Get A/D filter: -9.255963e+061 result=40 00:32:10 Get A/D value=-858993460 result=40 00:32:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:10 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:10 Parameters OK 00:32:10 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:10 Set A/D data flow result=40 00:32:10 Set A/D channel type result=40 00:32:10 Set A/D encoding result=40 00:32:10 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:10 Set channel filter=0.000000e+000 result=40 00:32:10 Config A/D Result=40 00:32:10 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:10 Get A/D filter: -9.255963e+061 result=40 00:32:10 Get A/D value=-858993460 result=40 00:32:10 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:10 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:10 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:10 Aux= 00:32:10 Message to Camera, serial 18052 queued 00:32:40 Received message from Master: op=PointingHead serial=18059 00:32:40 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:32:40 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:32:41 Point started: ret=0 00:32:41 point_skyscan result=0 00:32:41 Check angles 00:32:41 SkyScan query 00:32:42 SkyScan query done: ret=0 az=108.855<-7257 ze=-81.105<-17407 Statuses=0009 0009 00:32:42 Msec=0 True Az=108.855 Ze=-81.105 Az status=0009 Ze status=0009 00:32:42 Check angles 00:32:42 SkyScan query 00:32:43 SkyScan query done: ret=0 az=113.025<-7535 ze=-102.045<-18803 Statuses=0008 0009 00:32:43 Msec=750 True Az=113.025 Ze=-102.045 Az status=0008 Ze status=0009 00:32:43 Check angles 00:32:43 SkyScan query 00:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-123<-20200 Statuses=0008 0009 00:32:44 Msec=1500 True Az=112.995 Ze=-123 Az status=0008 Ze status=0009 00:32:44 Check angles 00:32:44 SkyScan query 00:32:44 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.39<-21626 Statuses=0008 0009 00:32:44 Msec=2250 True Az=112.995 Ze=-144.39 Az status=0008 Ze status=0009 00:32:45 Check angles 00:32:45 SkyScan query 00:32:45 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 00:32:45 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 00:32:45 Check angles 00:32:45 SkyScan query 00:32:46 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:32:46 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:32:46 Message to Master queued w/err=0: serial=18059 error=0 00:32:51 Received message from Master: op=Filter serial=18060 00:32:51 Color wheel filter change from 0 to 0 00:32:51 FLIGetFilterPos err=0 currentPosition=0 00:32:51 FLIGetStepsRemaining err=0 RemainingSteps=0 00:32:51 Filter is already there-color wheel unchanged 00:32:51 Received message from Master: op=Shutter serial=18061 00:32:51 Shutter LASER open 00:32:51 Received message from Camera: op=State serial=18063 00:32:51 GetSingleValue result=40 Value=cccccccc 00:32:51 SkyScan query 00:32:52 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:32:52 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:52 Parameters OK 00:32:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:52 Set A/D data flow result=40 00:32:52 Set A/D channel type result=40 00:32:52 Set A/D encoding result=40 00:32:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:52 Set channel filter=0.000000e+000 result=40 00:32:52 Config A/D Result=40 00:32:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:52 Get A/D filter: -9.255963e+061 result=40 00:32:52 Get A/D value=-858993460 result=40 00:32:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:52 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:32:52 Parameters OK 00:32:52 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:32:52 Set A/D data flow result=40 00:32:52 Set A/D channel type result=40 00:32:52 Set A/D encoding result=40 00:32:52 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:32:52 Set channel filter=0.000000e+000 result=40 00:32:52 Config A/D Result=40 00:32:52 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:32:52 Get A/D filter: -9.255963e+061 result=40 00:32:52 Get A/D value=-858993460 result=40 00:32:52 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:32:52 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:32:52 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:32:52 Aux= 00:32:52 Message to Camera, serial 18063 queued 00:32:54 Received message from Master: op=Shutter serial=18067 00:32:54 Shutter LASER close 00:32:55 Received message from Master: op=PointingHead serial=18071 00:32:55 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:32:55 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:32:55 Point started: ret=0 00:32:55 point_skyscan result=0 00:32:56 Check angles 00:32:56 SkyScan query 00:32:56 SkyScan query done: ret=0 az=89.925<-5995 ze=157.245<-1517 Statuses=0009 0009 00:32:56 Msec=0 True Az=89.925 Ze=157.245 Az status=0009 Ze status=0009 00:32:57 Check angles 00:32:57 SkyScan query 00:32:57 SkyScan query done: ret=0 az=72.405<-4827 ze=136.305<-2913 Statuses=0009 0009 00:32:57 Msec=750 True Az=72.405 Ze=136.305 Az status=0009 Ze status=0009 00:32:57 Check angles 00:32:57 SkyScan query 00:32:58 SkyScan query done: ret=0 az=54.885<-3659 ze=115.365<-4309 Statuses=0009 0009 00:32:58 Msec=1500 True Az=54.885 Ze=115.365 Az status=0009 Ze status=0009 00:32:58 Check angles 00:32:58 SkyScan query 00:32:59 SkyScan query done: ret=0 az=40.995<-2733 ze=93.96<-5736 Statuses=0009 0009 00:32:59 Msec=2250 True Az=40.995 Ze=93.96 Az status=0009 Ze status=0009 00:32:59 Check angles 00:32:59 SkyScan query 00:32:59 SkyScan query done: ret=0 az=40.995<-2733 ze=72.99<-7134 Statuses=0008 0009 00:32:59 Msec=3000 True Az=40.995 Ze=72.99 Az status=0008 Ze status=0009 00:33:00 Check angles 00:33:00 SkyScan query 00:33:00 SkyScan query done: ret=0 az=40.995<-2733 ze=52.56<-8496 Statuses=0008 0009 00:33:00 Msec=3750 True Az=40.995 Ze=52.56 Az status=0008 Ze status=0009 00:33:00 Check angles 00:33:00 SkyScan query 00:33:01 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:33:01 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:33:01 Message to Master queued w/err=0: serial=18071 error=0 00:33:06 Received message from Master: op=Filter serial=18072 00:33:06 Color wheel filter change from 0 to 0 00:33:06 FLIGetFilterPos err=0 currentPosition=0 00:33:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:06 Filter is already there-color wheel unchanged 00:33:06 Received message from Master: op=Shutter serial=18073 00:33:06 Shutter LASER close 00:33:06 Received message from Camera: op=State serial=18075 00:33:06 GetSingleValue result=40 Value=cccccccc 00:33:06 SkyScan query 00:33:07 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:33:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:07 Parameters OK 00:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:07 Set A/D data flow result=40 00:33:07 Set A/D channel type result=40 00:33:07 Set A/D encoding result=40 00:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:07 Set channel filter=0.000000e+000 result=40 00:33:07 Config A/D Result=40 00:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:07 Get A/D filter: -9.255963e+061 result=40 00:33:07 Get A/D value=-858993460 result=40 00:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:07 Parameters OK 00:33:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:07 Set A/D data flow result=40 00:33:07 Set A/D channel type result=40 00:33:07 Set A/D encoding result=40 00:33:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:07 Set channel filter=0.000000e+000 result=40 00:33:07 Config A/D Result=40 00:33:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:07 Get A/D filter: -9.255963e+061 result=40 00:33:07 Get A/D value=-858993460 result=40 00:33:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:07 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:07 Aux= 00:33:07 Message to Camera, serial 18075 queued 00:33:38 Received message from Master: op=PointingHead serial=18082 00:33:38 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:33:38 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:33:38 Point started: ret=0 00:33:38 point_skyscan result=0 00:33:39 Check angles 00:33:39 SkyScan query 00:33:39 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 00:33:39 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 00:33:40 Check angles 00:33:40 SkyScan query 00:33:40 SkyScan query done: ret=0 az=81.525<-5435 ze=66.495<-7567 Statuses=0009 0008 00:33:40 Msec=750 True Az=81.525 Ze=66.495 Az status=0009 Ze status=0008 00:33:40 Check angles 00:33:40 SkyScan query 00:33:41 SkyScan query done: ret=0 az=99.12<-6608 ze=66.495<-7567 Statuses=0009 0008 00:33:41 Msec=1500 True Az=99.12 Ze=66.495 Az status=0009 Ze status=0008 00:33:41 Check angles 00:33:41 SkyScan query 00:33:42 SkyScan query done: ret=0 az=116.505<-7767 ze=66.495<-7567 Statuses=0009 0008 00:33:42 Msec=2250 True Az=116.505 Ze=66.495 Az status=0009 Ze status=0008 00:33:42 Check angles 00:33:42 SkyScan query 00:33:42 SkyScan query done: ret=0 az=134.265<-8951 ze=66.495<-7567 Statuses=0009 0008 00:33:42 Msec=3000 True Az=134.265 Ze=66.495 Az status=0009 Ze status=0008 00:33:43 Check angles 00:33:43 SkyScan query 00:33:43 SkyScan query done: ret=0 az=151.605<-10107 ze=66.495<-7567 Statuses=0009 0008 00:33:43 Msec=3750 True Az=151.605 Ze=66.495 Az status=0009 Ze status=0008 00:33:43 Check angles 00:33:43 SkyScan query 00:33:44 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 00:33:44 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 00:33:44 Message to Master queued w/err=0: serial=18082 error=0 00:33:49 Received message from Master: op=Filter serial=18083 00:33:49 Color wheel filter change from 0 to 0 00:33:49 FLIGetFilterPos err=0 currentPosition=0 00:33:49 FLIGetStepsRemaining err=0 RemainingSteps=0 00:33:49 Filter is already there-color wheel unchanged 00:33:49 Received message from Master: op=Shutter serial=18084 00:33:49 Shutter LASER close 00:33:49 Received message from Camera: op=State serial=18086 00:33:49 GetSingleValue result=40 Value=cccccccc 00:33:49 SkyScan query 00:33:50 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:33:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:50 Parameters OK 00:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:50 Set A/D data flow result=40 00:33:50 Set A/D channel type result=40 00:33:50 Set A/D encoding result=40 00:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:50 Set channel filter=0.000000e+000 result=40 00:33:50 Config A/D Result=40 00:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:50 Get A/D filter: -9.255963e+061 result=40 00:33:50 Get A/D value=-858993460 result=40 00:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:33:50 Parameters OK 00:33:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:33:50 Set A/D data flow result=40 00:33:50 Set A/D channel type result=40 00:33:50 Set A/D encoding result=40 00:33:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:33:50 Set channel filter=0.000000e+000 result=40 00:33:50 Config A/D Result=40 00:33:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:33:50 Get A/D filter: -9.255963e+061 result=40 00:33:50 Get A/D value=-858993460 result=40 00:33:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:33:50 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:33:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:33:50 Aux= 00:33:50 Message to Camera, serial 18086 queued 00:34:21 Received message from Master: op=PointingHead serial=18093 00:34:21 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:34:21 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:34:21 Point started: ret=0 00:34:21 point_skyscan result=0 00:34:22 Check angles 00:34:22 SkyScan query 00:34:22 SkyScan query done: ret=0 az=134.88<-8992 ze=36.66<-9556 Statuses=0009 0009 00:34:22 Msec=0 True Az=134.88 Ze=36.66 Az status=0009 Ze status=0009 00:34:22 Check angles 00:34:22 SkyScan query 00:34:23 SkyScan query done: ret=0 az=117.465<-7831 ze=15.72<-10952 Statuses=0009 0009 00:34:23 Msec=750 True Az=117.465 Ze=15.72 Az status=0009 Ze status=0009 00:34:23 Check angles 00:34:23 SkyScan query 00:34:24 SkyScan query done: ret=0 az=99.795<-6653 ze=-5.685<-12379 Statuses=0009 0009 00:34:24 Msec=1500 True Az=99.795 Ze=-5.685 Az status=0009 Ze status=0009 00:34:24 Check angles 00:34:24 SkyScan query 00:34:24 SkyScan query done: ret=0 az=82.245<-5483 ze=-26.64<-13776 Statuses=0009 0009 00:34:24 Msec=2250 True Az=82.245 Ze=-26.64 Az status=0009 Ze status=0009 00:34:25 Check angles 00:34:25 SkyScan query 00:34:25 SkyScan query done: ret=0 az=64.755<-4317 ze=-38.58<-14572 Statuses=0009 0008 00:34:25 Msec=3000 True Az=64.755 Ze=-38.58 Az status=0009 Ze status=0008 00:34:25 Check angles 00:34:25 SkyScan query 00:34:26 SkyScan query done: ret=0 az=46.98<-3132 ze=-38.52<-14568 Statuses=0009 0008 00:34:26 Msec=3750 True Az=46.98 Ze=-38.52 Az status=0009 Ze status=0008 00:34:26 Check angles 00:34:26 SkyScan query 00:34:27 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:34:27 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:34:27 Message to Master queued w/err=0: serial=18093 error=0 00:34:32 Received message from Master: op=Filter serial=18094 00:34:32 Color wheel filter change from 0 to 0 00:34:32 FLIGetFilterPos err=0 currentPosition=0 00:34:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:34:32 Filter is already there-color wheel unchanged 00:34:32 Received message from Master: op=Shutter serial=18095 00:34:32 Shutter LASER close 00:34:32 Received message from Camera: op=State serial=18097 00:34:32 GetSingleValue result=40 Value=cccccccc 00:34:32 SkyScan query 00:34:33 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:34:33 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:33 Parameters OK 00:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:33 Set A/D data flow result=40 00:34:33 Set A/D channel type result=40 00:34:33 Set A/D encoding result=40 00:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:33 Set channel filter=0.000000e+000 result=40 00:34:33 Config A/D Result=40 00:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:33 Get A/D filter: -9.255963e+061 result=40 00:34:33 Get A/D value=-858993460 result=40 00:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:33 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:34:33 Parameters OK 00:34:33 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:34:33 Set A/D data flow result=40 00:34:33 Set A/D channel type result=40 00:34:33 Set A/D encoding result=40 00:34:33 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:34:33 Set channel filter=0.000000e+000 result=40 00:34:33 Config A/D Result=40 00:34:33 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:34:33 Get A/D filter: -9.255963e+061 result=40 00:34:33 Get A/D value=-858993460 result=40 00:34:33 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:34:33 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:34:33 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:34:33 Aux= 00:34:33 Message to Camera, serial 18097 queued 00:35:03 Received message from Master: op=PointingHead serial=18104 00:35:03 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:35:03 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:35:04 Point started: ret=0 00:35:04 point_skyscan result=0 00:35:05 Check angles 00:35:05 SkyScan query 00:35:05 SkyScan query done: ret=0 az=63.81<-4254 ze=-68.22<-16548 Statuses=0009 0009 00:35:05 Msec=0 True Az=63.81 Ze=-68.22 Az status=0009 Ze status=0009 00:35:05 Check angles 00:35:05 SkyScan query 00:35:06 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.61<-17974 Statuses=0009 0009 00:35:06 Msec=750 True Az=81.855 Ze=-89.61 Az status=0009 Ze status=0009 00:35:06 Check angles 00:35:06 SkyScan query 00:35:07 SkyScan query done: ret=0 az=99.285<-6619 ze=-110.58<-19372 Statuses=0009 0009 00:35:07 Msec=1500 True Az=99.285 Ze=-110.58 Az status=0009 Ze status=0009 00:35:07 Check angles 00:35:07 SkyScan query 00:35:07 SkyScan query done: ret=0 az=116.7<-7780 ze=-131.505<-20767 Statuses=0009 0009 00:35:07 Msec=2250 True Az=116.7 Ze=-131.505 Az status=0009 Ze status=0009 00:35:08 Check angles 00:35:08 SkyScan query 00:35:08 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 00:35:08 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 00:35:08 Check angles 00:35:08 SkyScan query 00:35:09 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:35:09 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:35:09 Message to Master queued w/err=0: serial=18104 error=0 00:35:14 Received message from Master: op=Filter serial=18105 00:35:14 Color wheel filter change from 0 to 0 00:35:14 FLIGetFilterPos err=0 currentPosition=0 00:35:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:14 Filter is already there-color wheel unchanged 00:35:14 Received message from Master: op=Shutter serial=18106 00:35:14 Shutter LASER close 00:35:14 Received message from Camera: op=State serial=18108 00:35:14 GetSingleValue result=40 Value=cccccccc 00:35:14 SkyScan query 00:35:15 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:35:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:15 Parameters OK 00:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:15 Set A/D data flow result=40 00:35:15 Set A/D channel type result=40 00:35:15 Set A/D encoding result=40 00:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:15 Set channel filter=0.000000e+000 result=40 00:35:15 Config A/D Result=40 00:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:15 Get A/D filter: -9.255963e+061 result=40 00:35:15 Get A/D value=-858993460 result=40 00:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:15 Parameters OK 00:35:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:15 Set A/D data flow result=40 00:35:15 Set A/D channel type result=40 00:35:15 Set A/D encoding result=40 00:35:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:15 Set channel filter=0.000000e+000 result=40 00:35:15 Config A/D Result=40 00:35:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:15 Get A/D filter: -9.255963e+061 result=40 00:35:15 Get A/D value=-858993460 result=40 00:35:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:15 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:15 Aux= 00:35:15 Message to Camera, serial 18108 queued 00:35:46 Received message from Master: op=PointingHead serial=18115 00:35:46 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:35:46 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:35:46 Point started: ret=0 00:35:46 point_skyscan result=0 00:35:47 Check angles 00:35:47 SkyScan query 00:35:47 SkyScan query done: ret=0 az=113.01<-7534 ze=-170.895<-23393 Statuses=0009 0009 00:35:47 Msec=0 True Az=113.01 Ze=-170.895 Az status=0009 Ze status=0009 00:35:47 Check angles 00:35:47 SkyScan query 00:35:48 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:35:48 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:35:48 Message to Master queued w/err=0: serial=18115 error=0 00:35:53 Received message from Master: op=Filter serial=18116 00:35:53 Color wheel filter change from 0 to 0 00:35:53 FLIGetFilterPos err=0 currentPosition=0 00:35:53 FLIGetStepsRemaining err=0 RemainingSteps=0 00:35:53 Filter is already there-color wheel unchanged 00:35:53 Received message from Master: op=Shutter serial=18117 00:35:53 Shutter LASER open 00:35:53 Received message from Camera: op=State serial=18119 00:35:53 GetSingleValue result=40 Value=cccccccc 00:35:53 SkyScan query 00:35:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:35:54 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:54 Parameters OK 00:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:54 Set A/D data flow result=40 00:35:54 Set A/D channel type result=40 00:35:54 Set A/D encoding result=40 00:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:54 Set channel filter=0.000000e+000 result=40 00:35:54 Config A/D Result=40 00:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:54 Get A/D filter: -9.255963e+061 result=40 00:35:54 Get A/D value=-858993460 result=40 00:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:54 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:35:54 Parameters OK 00:35:54 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:35:54 Set A/D data flow result=40 00:35:54 Set A/D channel type result=40 00:35:54 Set A/D encoding result=40 00:35:54 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:35:54 Set channel filter=0.000000e+000 result=40 00:35:54 Config A/D Result=40 00:35:54 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:35:54 Get A/D filter: -9.255963e+061 result=40 00:35:54 Get A/D value=-858993460 result=40 00:35:54 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:35:54 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:35:54 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:35:54 Aux= 00:35:54 Message to Camera, serial 18119 queued 00:35:56 Received message from Master: op=Shutter serial=18123 00:35:56 Shutter LASER close 00:35:57 Received message from Master: op=PointingHead serial=18127 00:35:57 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:35:57 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:35:57 Point started: ret=0 00:35:57 point_skyscan result=0 00:35:58 Check angles 00:35:58 SkyScan query 00:35:59 SkyScan query done: ret=0 az=136.215<-9081 ze=-142.845<-21523 Statuses=0009 0009 00:35:59 Msec=0 True Az=136.215 Ze=-142.845 Az status=0009 Ze status=0009 00:35:59 Check angles 00:35:59 SkyScan query 00:35:59 SkyScan query done: ret=0 az=153.78<-10252 ze=-121.875<-20125 Statuses=0009 0009 00:35:59 Msec=750 True Az=153.78 Ze=-121.875 Az status=0009 Ze status=0009 00:35:59 Check angles 00:35:59 SkyScan query 00:36:00 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.935<-18729 Statuses=0009 0009 00:36:00 Msec=1500 True Az=171.27 Ze=-100.935 Az status=0009 Ze status=0009 00:36:00 Check angles 00:36:00 SkyScan query 00:36:01 SkyScan query done: ret=0 az=176.025<-11735 ze=-79.98<-17332 Statuses=0008 0009 00:36:01 Msec=2250 True Az=176.025 Ze=-79.98 Az status=0008 Ze status=0009 00:36:01 Check angles 00:36:01 SkyScan query 00:36:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.025<-15935 Statuses=0008 0009 00:36:02 Msec=3000 True Az=175.995 Ze=-59.025 Az status=0008 Ze status=0009 00:36:02 Check angles 00:36:02 SkyScan query 00:36:02 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:36:02 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:36:02 Message to Master queued w/err=0: serial=18127 error=0 00:36:07 Received message from Master: op=Filter serial=18128 00:36:07 Color wheel filter change from 0 to 0 00:36:07 FLIGetFilterPos err=0 currentPosition=0 00:36:07 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:07 Filter is already there-color wheel unchanged 00:36:07 Received message from Master: op=Shutter serial=18129 00:36:07 Shutter LASER close 00:36:08 Received message from Camera: op=State serial=18131 00:36:08 GetSingleValue result=40 Value=cccccccc 00:36:08 SkyScan query 00:36:08 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:36:08 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:08 Parameters OK 00:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:08 Set A/D data flow result=40 00:36:08 Set A/D channel type result=40 00:36:08 Set A/D encoding result=40 00:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:08 Set channel filter=0.000000e+000 result=40 00:36:08 Config A/D Result=40 00:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:08 Get A/D filter: -9.255963e+061 result=40 00:36:08 Get A/D value=-858993460 result=40 00:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:08 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:08 Parameters OK 00:36:08 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:08 Set A/D data flow result=40 00:36:08 Set A/D channel type result=40 00:36:08 Set A/D encoding result=40 00:36:08 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:08 Set channel filter=0.000000e+000 result=40 00:36:08 Config A/D Result=40 00:36:08 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:08 Get A/D filter: -9.255963e+061 result=40 00:36:08 Get A/D value=-858993460 result=40 00:36:08 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:08 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:08 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:08 Aux= 00:36:08 Message to Camera, serial 18131 queued 00:36:39 Received message from Master: op=PointingHead serial=18138 00:36:39 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:36:39 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:36:39 Point started: ret=0 00:36:39 point_skyscan result=0 00:36:40 Check angles 00:36:40 SkyScan query 00:36:41 SkyScan query done: ret=0 az=152.97<-10198 ze=-21.72<-13448 Statuses=0009 0009 00:36:41 Msec=0 True Az=152.97 Ze=-21.72 Az status=0009 Ze status=0009 00:36:41 Check angles 00:36:41 SkyScan query 00:36:41 SkyScan query done: ret=0 az=135.435<-9029 ze=-0.735<-12049 Statuses=0009 0009 00:36:41 Msec=750 True Az=135.435 Ze=-0.735 Az status=0009 Ze status=0009 00:36:42 Check angles 00:36:42 SkyScan query 00:36:42 SkyScan query done: ret=0 az=117.57<-7838 ze=20.625<-10625 Statuses=0009 0009 00:36:42 Msec=1500 True Az=117.57 Ze=20.625 Az status=0009 Ze status=0009 00:36:42 Check angles 00:36:42 SkyScan query 00:36:43 SkyScan query done: ret=0 az=100.2<-6680 ze=41.58<-9228 Statuses=0009 0009 00:36:43 Msec=2250 True Az=100.2 Ze=41.58 Az status=0009 Ze status=0009 00:36:43 Check angles 00:36:43 SkyScan query 00:36:44 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:36:44 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:36:44 Check angles 00:36:44 SkyScan query 00:36:44 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:36:44 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:36:44 Message to Master queued w/err=0: serial=18138 error=0 00:36:49 Received message from Master: op=Filter serial=18139 00:36:49 Color wheel filter change from 0 to 0 00:36:49 FLIGetFilterPos err=0 currentPosition=0 00:36:49 FLIGetStepsRemaining err=0 RemainingSteps=0 00:36:49 Filter is already there-color wheel unchanged 00:36:50 Received message from Master: op=Shutter serial=18140 00:36:50 Shutter LASER close 00:36:50 Received message from Camera: op=State serial=18142 00:36:50 GetSingleValue result=40 Value=cccccccc 00:36:50 SkyScan query 00:36:50 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:36:50 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:50 Parameters OK 00:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:50 Set A/D data flow result=40 00:36:50 Set A/D channel type result=40 00:36:50 Set A/D encoding result=40 00:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:50 Set channel filter=0.000000e+000 result=40 00:36:50 Config A/D Result=40 00:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:50 Get A/D filter: -9.255963e+061 result=40 00:36:50 Get A/D value=-858993460 result=40 00:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:50 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:36:50 Parameters OK 00:36:50 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:36:50 Set A/D data flow result=40 00:36:50 Set A/D channel type result=40 00:36:50 Set A/D encoding result=40 00:36:50 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:36:50 Set channel filter=0.000000e+000 result=40 00:36:50 Config A/D Result=40 00:36:50 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:36:50 Get A/D filter: -9.255963e+061 result=40 00:36:50 Get A/D value=-858993460 result=40 00:36:50 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:36:50 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:36:50 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:36:50 Aux= 00:36:50 Message to Camera, serial 18142 queued 00:37:21 Received message from Master: op=PointingHead serial=18149 00:37:21 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:37:21 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:37:21 Point started: ret=0 00:37:21 point_skyscan result=0 00:37:22 Check angles 00:37:22 SkyScan query 00:37:23 SkyScan query done: ret=0 az=108.915<-7261 ze=38.49<-9434 Statuses=0009 0008 00:37:23 Msec=0 True Az=108.915 Ze=38.49 Az status=0009 Ze status=0008 00:37:23 Check angles 00:37:23 SkyScan query 00:37:24 SkyScan query done: ret=0 az=126.54<-8436 ze=38.505<-9433 Statuses=0009 0008 00:37:24 Msec=750 True Az=126.54 Ze=38.505 Az status=0009 Ze status=0008 00:37:24 Check angles 00:37:24 SkyScan query 00:37:24 SkyScan query done: ret=0 az=143.895<-9593 ze=38.505<-9433 Statuses=0009 0008 00:37:24 Msec=1500 True Az=143.895 Ze=38.505 Az status=0009 Ze status=0008 00:37:24 Check angles 00:37:24 SkyScan query 00:37:25 SkyScan query done: ret=0 az=161.4<-10760 ze=38.505<-9433 Statuses=0009 0008 00:37:25 Msec=2250 True Az=161.4 Ze=38.505 Az status=0009 Ze status=0008 00:37:25 Check angles 00:37:25 SkyScan query 00:37:26 SkyScan query done: ret=0 az=176.025<-11735 ze=38.505<-9433 Statuses=0009 0008 00:37:26 Msec=3000 True Az=176.025 Ze=38.505 Az status=0009 Ze status=0008 00:37:26 Check angles 00:37:26 SkyScan query 00:37:27 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:37:27 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:37:27 Message to Master queued w/err=0: serial=18149 error=0 00:37:32 Received message from Master: op=Filter serial=18150 00:37:32 Color wheel filter change from 0 to 0 00:37:32 FLIGetFilterPos err=0 currentPosition=0 00:37:32 FLIGetStepsRemaining err=0 RemainingSteps=0 00:37:32 Filter is already there-color wheel unchanged 00:37:32 Received message from Master: op=Shutter serial=18151 00:37:32 Shutter LASER close 00:37:32 Received message from Camera: op=State serial=18153 00:37:32 GetSingleValue result=40 Value=cccccccc 00:37:32 SkyScan query 00:37:32 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:37:32 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:32 Parameters OK 00:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:32 Set A/D data flow result=40 00:37:32 Set A/D channel type result=40 00:37:32 Set A/D encoding result=40 00:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:32 Set channel filter=0.000000e+000 result=40 00:37:32 Config A/D Result=40 00:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:32 Get A/D filter: -9.255963e+061 result=40 00:37:32 Get A/D value=-858993460 result=40 00:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:32 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:37:32 Parameters OK 00:37:32 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:37:32 Set A/D data flow result=40 00:37:32 Set A/D channel type result=40 00:37:32 Set A/D encoding result=40 00:37:32 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:37:32 Set channel filter=0.000000e+000 result=40 00:37:32 Config A/D Result=40 00:37:32 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:37:32 Get A/D filter: -9.255963e+061 result=40 00:37:32 Get A/D value=-858993460 result=40 00:37:32 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:37:32 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:37:32 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:37:32 Aux= 00:37:32 Message to Camera, serial 18153 queued 00:38:03 Received message from Master: op=PointingHead serial=18160 00:38:03 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:38:03 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:38:04 Point started: ret=0 00:38:04 point_skyscan result=0 00:38:04 Check angles 00:38:04 SkyScan query 00:38:05 SkyScan query done: ret=0 az=152.49<-10166 ze=8.205<-11453 Statuses=0009 0009 00:38:05 Msec=0 True Az=152.49 Ze=8.205 Az status=0009 Ze status=0009 00:38:05 Check angles 00:38:05 SkyScan query 00:38:06 SkyScan query done: ret=0 az=135.03<-9002 ze=-12.75<-12850 Statuses=0009 0009 00:38:06 Msec=750 True Az=135.03 Ze=-12.75 Az status=0009 Ze status=0009 00:38:06 Check angles 00:38:06 SkyScan query 00:38:06 SkyScan query done: ret=0 az=117.105<-7807 ze=-34.14<-14276 Statuses=0009 0009 00:38:06 Msec=1500 True Az=117.105 Ze=-34.14 Az status=0009 Ze status=0009 00:38:07 Check angles 00:38:07 SkyScan query 00:38:07 SkyScan query done: ret=0 az=99.69<-6646 ze=-51.555<-15437 Statuses=0009 0009 00:38:07 Msec=2250 True Az=99.69 Ze=-51.555 Az status=0009 Ze status=0009 00:38:07 Check angles 00:38:07 SkyScan query 00:38:08 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.525<-15435 Statuses=0009 0008 00:38:08 Msec=3000 True Az=86.01 Ze=-51.525 Az status=0009 Ze status=0008 00:38:08 Check angles 00:38:08 SkyScan query 00:38:09 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:38:09 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:38:09 Message to Master queued w/err=0: serial=18160 error=0 00:38:14 Received message from Master: op=Filter serial=18161 00:38:14 Color wheel filter change from 0 to 0 00:38:14 FLIGetFilterPos err=0 currentPosition=0 00:38:14 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:14 Filter is already there-color wheel unchanged 00:38:14 Received message from Master: op=Shutter serial=18162 00:38:14 Shutter LASER close 00:38:14 Received message from Camera: op=State serial=18164 00:38:14 GetSingleValue result=40 Value=cccccccc 00:38:14 SkyScan query 00:38:15 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:38:15 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:15 Parameters OK 00:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:15 Set A/D data flow result=40 00:38:15 Set A/D channel type result=40 00:38:15 Set A/D encoding result=40 00:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:15 Set channel filter=0.000000e+000 result=40 00:38:15 Config A/D Result=40 00:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:15 Get A/D filter: -9.255963e+061 result=40 00:38:15 Get A/D value=-858993460 result=40 00:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:15 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:15 Parameters OK 00:38:15 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:15 Set A/D data flow result=40 00:38:15 Set A/D channel type result=40 00:38:15 Set A/D encoding result=40 00:38:15 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:15 Set channel filter=0.000000e+000 result=40 00:38:15 Config A/D Result=40 00:38:15 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:15 Get A/D filter: -9.255963e+061 result=40 00:38:15 Get A/D value=-858993460 result=40 00:38:15 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:15 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:15 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:15 Aux= 00:38:15 Message to Camera, serial 18164 queued 00:38:45 Received message from Master: op=PointingHead serial=18171 00:38:45 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:38:45 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:38:46 Point started: ret=0 00:38:46 point_skyscan result=0 00:38:46 Check angles 00:38:46 SkyScan query 00:38:47 SkyScan query done: ret=0 az=108.84<-7256 ze=-81.09<-17406 Statuses=0009 0009 00:38:47 Msec=0 True Az=108.84 Ze=-81.09 Az status=0009 Ze status=0009 00:38:47 Check angles 00:38:47 SkyScan query 00:38:48 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.045<-18803 Statuses=0008 0009 00:38:48 Msec=750 True Az=113.01 Ze=-102.045 Az status=0008 Ze status=0009 00:38:48 Check angles 00:38:48 SkyScan query 00:38:49 SkyScan query done: ret=0 az=113.01<-7534 ze=-123<-20200 Statuses=0008 0009 00:38:49 Msec=1500 True Az=113.01 Ze=-123 Az status=0008 Ze status=0009 00:38:49 Check angles 00:38:49 SkyScan query 00:38:49 SkyScan query done: ret=0 az=112.995<-7533 ze=-144.36<-21624 Statuses=0008 0009 00:38:49 Msec=2250 True Az=112.995 Ze=-144.36 Az status=0008 Ze status=0009 00:38:49 Check angles 00:38:49 SkyScan query 00:38:50 SkyScan query done: ret=0 az=112.995<-7533 ze=-165.345<-23023 Statuses=0008 0009 00:38:50 Msec=3000 True Az=112.995 Ze=-165.345 Az status=0008 Ze status=0009 00:38:50 Check angles 00:38:50 SkyScan query 00:38:51 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:38:51 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:38:51 Message to Master queued w/err=0: serial=18171 error=0 00:38:56 Received message from Master: op=Filter serial=18172 00:38:56 Color wheel filter change from 0 to 0 00:38:56 FLIGetFilterPos err=0 currentPosition=0 00:38:56 FLIGetStepsRemaining err=0 RemainingSteps=0 00:38:56 Filter is already there-color wheel unchanged 00:38:56 Received message from Master: op=Shutter serial=18173 00:38:56 Shutter LASER open 00:38:56 Received message from Camera: op=State serial=18175 00:38:56 GetSingleValue result=40 Value=cccccccc 00:38:56 SkyScan query 00:38:57 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:38:57 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:57 Parameters OK 00:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:57 Set A/D data flow result=40 00:38:57 Set A/D channel type result=40 00:38:57 Set A/D encoding result=40 00:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:57 Set channel filter=0.000000e+000 result=40 00:38:57 Config A/D Result=40 00:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:57 Get A/D filter: -9.255963e+061 result=40 00:38:57 Get A/D value=-858993460 result=40 00:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:57 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:38:57 Parameters OK 00:38:57 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:38:57 Set A/D data flow result=40 00:38:57 Set A/D channel type result=40 00:38:57 Set A/D encoding result=40 00:38:57 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:38:57 Set channel filter=0.000000e+000 result=40 00:38:57 Config A/D Result=40 00:38:57 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:38:57 Get A/D filter: -9.255963e+061 result=40 00:38:57 Get A/D value=-858993460 result=40 00:38:57 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:38:57 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:38:57 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:38:57 Aux= 00:38:57 Message to Camera, serial 18175 queued 00:38:59 Received message from Master: op=Shutter serial=18179 00:38:59 Shutter LASER close 00:39:00 Received message from Master: op=PointingHead serial=18183 00:39:00 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:39:00 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:39:00 Point started: ret=0 00:39:00 point_skyscan result=0 00:39:01 Check angles 00:39:01 SkyScan query 00:39:01 SkyScan query done: ret=0 az=90.195<-6013 ze=157.455<-1503 Statuses=0009 0009 00:39:01 Msec=0 True Az=90.195 Ze=157.455 Az status=0009 Ze status=0009 00:39:01 Check angles 00:39:01 SkyScan query 00:39:02 SkyScan query done: ret=0 az=72.705<-4847 ze=136.5<-2900 Statuses=0009 0009 00:39:02 Msec=750 True Az=72.705 Ze=136.5 Az status=0009 Ze status=0009 00:39:02 Check angles 00:39:02 SkyScan query 00:39:03 SkyScan query done: ret=0 az=54.9<-3660 ze=115.11<-4326 Statuses=0009 0009 00:39:03 Msec=1500 True Az=54.9 Ze=115.11 Az status=0009 Ze status=0009 00:39:03 Check angles 00:39:03 SkyScan query 00:39:04 SkyScan query done: ret=0 az=41.025<-2735 ze=94.14<-5724 Statuses=0009 0009 00:39:04 Msec=2250 True Az=41.025 Ze=94.14 Az status=0009 Ze status=0009 00:39:04 Check angles 00:39:04 SkyScan query 00:39:04 SkyScan query done: ret=0 az=40.995<-2733 ze=72.75<-7150 Statuses=0008 0009 00:39:04 Msec=3000 True Az=40.995 Ze=72.75 Az status=0008 Ze status=0009 00:39:04 Check angles 00:39:04 SkyScan query 00:39:05 SkyScan query done: ret=0 az=40.995<-2733 ze=52.425<-8505 Statuses=0008 0009 00:39:05 Msec=3750 True Az=40.995 Ze=52.425 Az status=0008 Ze status=0009 00:39:05 Check angles 00:39:05 SkyScan query 00:39:06 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:39:06 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:39:06 Message to Master queued w/err=0: serial=18183 error=0 00:39:11 Received message from Master: op=Filter serial=18184 00:39:11 Color wheel filter change from 0 to 0 00:39:11 FLIGetFilterPos err=0 currentPosition=0 00:39:11 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:11 Filter is already there-color wheel unchanged 00:39:11 Received message from Master: op=Shutter serial=18185 00:39:11 Shutter LASER close 00:39:11 Received message from Camera: op=State serial=18187 00:39:11 GetSingleValue result=40 Value=cccccccc 00:39:11 SkyScan query 00:39:12 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:39:12 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:12 Parameters OK 00:39:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:12 Set A/D data flow result=40 00:39:12 Set A/D channel type result=40 00:39:12 Set A/D encoding result=40 00:39:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:12 Set channel filter=0.000000e+000 result=40 00:39:12 Config A/D Result=40 00:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:12 Get A/D filter: -9.255963e+061 result=40 00:39:12 Get A/D value=-858993460 result=40 00:39:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:12 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:12 Parameters OK 00:39:12 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:12 Set A/D data flow result=40 00:39:12 Set A/D channel type result=40 00:39:12 Set A/D encoding result=40 00:39:12 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:12 Set channel filter=0.000000e+000 result=40 00:39:12 Config A/D Result=40 00:39:12 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:12 Get A/D filter: -9.255963e+061 result=40 00:39:12 Get A/D value=-858993460 result=40 00:39:12 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:12 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:12 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:12 Aux= 00:39:12 Message to Camera, serial 18187 queued 00:39:43 Received message from Master: op=PointingHead serial=18194 00:39:43 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:39:43 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:39:43 Point started: ret=0 00:39:43 point_skyscan result=0 00:39:44 Check angles 00:39:44 SkyScan query 00:39:44 SkyScan query done: ret=0 az=64.2<-4280 ze=66.555<-7563 Statuses=0009 0008 00:39:44 Msec=0 True Az=64.2 Ze=66.555 Az status=0009 Ze status=0008 00:39:44 Check angles 00:39:44 SkyScan query 00:39:45 SkyScan query done: ret=0 az=82.23<-5482 ze=66.495<-7567 Statuses=0009 0008 00:39:45 Msec=750 True Az=82.23 Ze=66.495 Az status=0009 Ze status=0008 00:39:45 Check angles 00:39:45 SkyScan query 00:39:46 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 00:39:46 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 00:39:46 Check angles 00:39:46 SkyScan query 00:39:46 SkyScan query done: ret=0 az=117.03<-7802 ze=66.495<-7567 Statuses=0009 0008 00:39:46 Msec=2250 True Az=117.03 Ze=66.495 Az status=0009 Ze status=0008 00:39:47 Check angles 00:39:47 SkyScan query 00:39:47 SkyScan query done: ret=0 az=134.94<-8996 ze=66.495<-7567 Statuses=0009 0008 00:39:47 Msec=3000 True Az=134.94 Ze=66.495 Az status=0009 Ze status=0008 00:39:47 Check angles 00:39:47 SkyScan query 00:39:48 SkyScan query done: ret=0 az=152.565<-10171 ze=66.495<-7567 Statuses=0009 0008 00:39:48 Msec=3750 True Az=152.565 Ze=66.495 Az status=0009 Ze status=0008 00:39:48 Check angles 00:39:48 SkyScan query 00:39:49 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 00:39:49 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 00:39:49 Message to Master queued w/err=0: serial=18194 error=0 00:39:54 Received message from Master: op=Filter serial=18195 00:39:54 Color wheel filter change from 0 to 0 00:39:54 FLIGetFilterPos err=0 currentPosition=0 00:39:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:39:54 Filter is already there-color wheel unchanged 00:39:54 Received message from Master: op=Shutter serial=18196 00:39:54 Shutter LASER close 00:39:54 Received message from Camera: op=State serial=18198 00:39:54 GetSingleValue result=40 Value=cccccccc 00:39:54 SkyScan query 00:39:55 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:39:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:55 Parameters OK 00:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:55 Set A/D data flow result=40 00:39:55 Set A/D channel type result=40 00:39:55 Set A/D encoding result=40 00:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:55 Set channel filter=0.000000e+000 result=40 00:39:55 Config A/D Result=40 00:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:55 Get A/D filter: -9.255963e+061 result=40 00:39:55 Get A/D value=-858993460 result=40 00:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:39:55 Parameters OK 00:39:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:39:55 Set A/D data flow result=40 00:39:55 Set A/D channel type result=40 00:39:55 Set A/D encoding result=40 00:39:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:39:55 Set channel filter=0.000000e+000 result=40 00:39:55 Config A/D Result=40 00:39:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:39:55 Get A/D filter: -9.255963e+061 result=40 00:39:55 Get A/D value=-858993460 result=40 00:39:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:39:55 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:39:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:39:55 Aux= 00:39:55 Message to Camera, serial 18198 queued 00:40:25 Received message from Master: op=PointingHead serial=18205 00:40:25 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:40:25 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:40:26 Point started: ret=0 00:40:26 point_skyscan result=0 00:40:27 Check angles 00:40:27 SkyScan query 00:40:27 SkyScan query done: ret=0 az=134.64<-8976 ze=36.225<-9585 Statuses=0009 0009 00:40:27 Msec=0 True Az=134.64 Ze=36.225 Az status=0009 Ze status=0009 00:40:27 Check angles 00:40:27 SkyScan query 00:40:28 SkyScan query done: ret=0 az=117.075<-7805 ze=15.285<-10981 Statuses=0009 0009 00:40:28 Msec=750 True Az=117.075 Ze=15.285 Az status=0009 Ze status=0009 00:40:28 Check angles 00:40:28 SkyScan query 00:40:29 SkyScan query done: ret=0 az=99.66<-6644 ze=-5.79<-12386 Statuses=0009 0009 00:40:29 Msec=1500 True Az=99.66 Ze=-5.79 Az status=0009 Ze status=0009 00:40:29 Check angles 00:40:29 SkyScan query 00:40:29 SkyScan query done: ret=0 az=81.825<-5455 ze=-27.06<-13804 Statuses=0009 0009 00:40:29 Msec=2250 True Az=81.825 Ze=-27.06 Az status=0009 Ze status=0009 00:40:30 Check angles 00:40:30 SkyScan query 00:40:30 SkyScan query done: ret=0 az=64.44<-4296 ze=-38.565<-14571 Statuses=0009 0008 00:40:30 Msec=3000 True Az=64.44 Ze=-38.565 Az status=0009 Ze status=0008 [UTC 2018-12-4 00:40:30] 00:40:30 Check angles 00:40:30 SkyScan query 00:40:31 SkyScan query done: ret=0 az=45.51<-3034 ze=-38.52<-14568 Statuses=0009 0008 00:40:31 Msec=3750 True Az=45.51 Ze=-38.52 Az status=0009 Ze status=0008 00:40:31 Check angles 00:40:31 SkyScan query 00:40:32 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:40:32 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:40:32 Message to Master queued w/err=0: serial=18205 error=0 00:40:37 Received message from Master: op=Filter serial=18206 00:40:37 Color wheel filter change from 0 to 0 00:40:37 FLIGetFilterPos err=0 currentPosition=0 00:40:37 FLIGetStepsRemaining err=0 RemainingSteps=0 00:40:37 Filter is already there-color wheel unchanged 00:40:37 Received message from Master: op=Shutter serial=18207 00:40:37 Shutter LASER close 00:40:37 Received message from Camera: op=State serial=18209 00:40:37 GetSingleValue result=40 Value=cccccccc 00:40:37 SkyScan query 00:40:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:40:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:37 Parameters OK 00:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:37 Set A/D data flow result=40 00:40:37 Set A/D channel type result=40 00:40:37 Set A/D encoding result=40 00:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:37 Set channel filter=0.000000e+000 result=40 00:40:37 Config A/D Result=40 00:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:37 Get A/D filter: -9.255963e+061 result=40 00:40:37 Get A/D value=-858993460 result=40 00:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:40:37 Parameters OK 00:40:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:40:37 Set A/D data flow result=40 00:40:37 Set A/D channel type result=40 00:40:37 Set A/D encoding result=40 00:40:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:40:37 Set channel filter=0.000000e+000 result=40 00:40:37 Config A/D Result=40 00:40:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:40:37 Get A/D filter: -9.255963e+061 result=40 00:40:37 Get A/D value=-858993460 result=40 00:40:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:40:37 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:40:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:40:37 Aux= 00:40:37 Message to Camera, serial 18209 queued 00:41:08 Received message from Master: op=PointingHead serial=18216 00:41:08 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:41:08 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:41:09 Point started: ret=0 00:41:09 point_skyscan result=0 00:41:09 Check angles 00:41:09 SkyScan query 00:41:10 SkyScan query done: ret=0 az=63.795<-4253 ze=-68.025<-16535 Statuses=0009 0009 00:41:10 Msec=0 True Az=63.795 Ze=-68.025 Az status=0009 Ze status=0009 00:41:10 Check angles 00:41:10 SkyScan query 00:41:11 SkyScan query done: ret=0 az=81.165<-5411 ze=-88.98<-17932 Statuses=0009 0009 00:41:11 Msec=750 True Az=81.165 Ze=-88.98 Az status=0009 Ze status=0009 00:41:11 Check angles 00:41:11 SkyScan query 00:41:11 SkyScan query done: ret=0 az=98.805<-6587 ze=-109.92<-19328 Statuses=0009 0009 00:41:11 Msec=1500 True Az=98.805 Ze=-109.92 Az status=0009 Ze status=0009 00:41:12 Check angles 00:41:12 SkyScan query 00:41:12 SkyScan query done: ret=0 az=116.13<-7742 ze=-130.89<-20726 Statuses=0009 0009 00:41:12 Msec=2250 True Az=116.13 Ze=-130.89 Az status=0009 Ze status=0009 00:41:12 Check angles 00:41:12 SkyScan query 00:41:13 SkyScan query done: ret=0 az=131.07<-8738 ze=-141.525<-21435 Statuses=0009 0008 00:41:13 Msec=3000 True Az=131.07 Ze=-141.525 Az status=0009 Ze status=0008 00:41:13 Check angles 00:41:13 SkyScan query 00:41:14 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:41:14 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:41:14 Message to Master queued w/err=0: serial=18216 error=0 00:41:19 Received message from Master: op=Filter serial=18217 00:41:19 Color wheel filter change from 0 to 0 00:41:19 FLIGetFilterPos err=0 currentPosition=0 00:41:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:19 Filter is already there-color wheel unchanged 00:41:19 Received message from Master: op=Shutter serial=18218 00:41:19 Shutter LASER close 00:41:19 Received message from Camera: op=State serial=18220 00:41:19 GetSingleValue result=40 Value=cccccccc 00:41:19 SkyScan query 00:41:19 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:41:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:19 Parameters OK 00:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:19 Set A/D data flow result=40 00:41:19 Set A/D channel type result=40 00:41:19 Set A/D encoding result=40 00:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:19 Set channel filter=0.000000e+000 result=40 00:41:19 Config A/D Result=40 00:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:19 Get A/D filter: -9.255963e+061 result=40 00:41:19 Get A/D value=-858993460 result=40 00:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:19 Parameters OK 00:41:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:19 Set A/D data flow result=40 00:41:19 Set A/D channel type result=40 00:41:19 Set A/D encoding result=40 00:41:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:19 Set channel filter=0.000000e+000 result=40 00:41:19 Config A/D Result=40 00:41:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:19 Get A/D filter: -9.255963e+061 result=40 00:41:19 Get A/D value=-858993460 result=40 00:41:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:19 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:19 Aux= 00:41:19 Message to Camera, serial 18220 queued 00:41:50 Received message from Master: op=PointingHead serial=18227 00:41:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:41:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:41:51 Point started: ret=0 00:41:51 point_skyscan result=0 00:41:51 Check angles 00:41:51 SkyScan query 00:41:52 SkyScan query done: ret=0 az=113.01<-7534 ze=-171.405<-23427 Statuses=0009 0009 00:41:52 Msec=0 True Az=113.01 Ze=-171.405 Az status=0009 Ze status=0009 00:41:52 Check angles 00:41:52 SkyScan query 00:41:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:41:53 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:41:53 Message to Master queued w/err=0: serial=18227 error=0 00:41:58 Received message from Master: op=Filter serial=18228 00:41:58 Color wheel filter change from 0 to 0 00:41:58 FLIGetFilterPos err=0 currentPosition=0 00:41:58 FLIGetStepsRemaining err=0 RemainingSteps=0 00:41:58 Filter is already there-color wheel unchanged 00:41:58 Received message from Master: op=Shutter serial=18229 00:41:58 Shutter LASER open 00:41:58 Received message from Camera: op=State serial=18231 00:41:58 GetSingleValue result=40 Value=cccccccc 00:41:58 SkyScan query 00:41:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:41:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:59 Parameters OK 00:41:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:59 Set A/D data flow result=40 00:41:59 Set A/D channel type result=40 00:41:59 Set A/D encoding result=40 00:41:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:59 Set channel filter=0.000000e+000 result=40 00:41:59 Config A/D Result=40 00:41:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:59 Get A/D filter: -9.255963e+061 result=40 00:41:59 Get A/D value=-858993460 result=40 00:41:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:41:59 Parameters OK 00:41:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:41:59 Set A/D data flow result=40 00:41:59 Set A/D channel type result=40 00:41:59 Set A/D encoding result=40 00:41:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:41:59 Set channel filter=0.000000e+000 result=40 00:41:59 Config A/D Result=40 00:41:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:41:59 Get A/D filter: -9.255963e+061 result=40 00:41:59 Get A/D value=-858993460 result=40 00:41:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:41:59 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:41:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:41:59 Aux= 00:41:59 Message to Camera, serial 18231 queued 00:42:01 Received message from Master: op=Shutter serial=18235 00:42:01 Shutter LASER close 00:42:02 Received message from Master: op=PointingHead serial=18239 00:42:02 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:42:02 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:42:02 Point started: ret=0 00:42:02 point_skyscan result=0 00:42:03 Check angles 00:42:03 SkyScan query 00:42:03 SkyScan query done: ret=0 az=136.065<-9071 ze=-143.07<-21538 Statuses=0009 0009 00:42:03 Msec=0 True Az=136.065 Ze=-143.07 Az status=0009 Ze status=0009 00:42:04 Check angles 00:42:04 SkyScan query 00:42:04 SkyScan query done: ret=0 az=153.66<-10244 ze=-122.085<-20139 Statuses=0009 0009 00:42:04 Msec=750 True Az=153.66 Ze=-122.085 Az status=0009 Ze status=0009 00:42:04 Check angles 00:42:04 SkyScan query 00:42:05 SkyScan query done: ret=0 az=171.015<-11401 ze=-101.175<-18745 Statuses=0009 0009 00:42:05 Msec=1500 True Az=171.015 Ze=-101.175 Az status=0009 Ze status=0009 00:42:05 Check angles 00:42:05 SkyScan query 00:42:06 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.205<-17347 Statuses=0008 0009 00:42:06 Msec=2250 True Az=176.025 Ze=-80.205 Az status=0008 Ze status=0009 00:42:06 Check angles 00:42:06 SkyScan query 00:42:06 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.235<-15949 Statuses=0008 0009 00:42:06 Msec=3000 True Az=175.995 Ze=-59.235 Az status=0008 Ze status=0009 00:42:07 Check angles 00:42:07 SkyScan query 00:42:07 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.465<-15431 Statuses=0008 0008 00:42:07 Msec=3750 True Az=175.995 Ze=-51.465 Az status=0008 Ze status=0008 00:42:07 Message to Master queued w/err=0: serial=18239 error=0 00:42:12 Received message from Master: op=Filter serial=18240 00:42:12 Color wheel filter change from 0 to 0 00:42:12 FLIGetFilterPos err=0 currentPosition=0 00:42:12 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:12 Filter is already there-color wheel unchanged 00:42:12 Received message from Master: op=Shutter serial=18241 00:42:12 Shutter LASER close 00:42:12 Received message from Camera: op=State serial=18243 00:42:12 GetSingleValue result=40 Value=cccccccc 00:42:12 SkyScan query 00:42:13 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:42:13 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:13 Parameters OK 00:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:13 Set A/D data flow result=40 00:42:13 Set A/D channel type result=40 00:42:13 Set A/D encoding result=40 00:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:13 Set channel filter=0.000000e+000 result=40 00:42:13 Config A/D Result=40 00:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:13 Get A/D filter: -9.255963e+061 result=40 00:42:13 Get A/D value=-858993460 result=40 00:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:13 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:13 Parameters OK 00:42:13 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:13 Set A/D data flow result=40 00:42:13 Set A/D channel type result=40 00:42:13 Set A/D encoding result=40 00:42:13 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:13 Set channel filter=0.000000e+000 result=40 00:42:13 Config A/D Result=40 00:42:13 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:13 Get A/D filter: -9.255963e+061 result=40 00:42:13 Get A/D value=-858993460 result=40 00:42:13 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:13 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:13 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:13 Aux= 00:42:13 Message to Camera, serial 18243 queued 00:42:27 Received message from Master: op=Identify serial=18244 00:42:44 Received message from Master: op=PointingHead serial=18253 00:42:44 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:42:44 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:42:44 Point started: ret=0 00:42:44 point_skyscan result=0 00:42:45 Check angles 00:42:45 SkyScan query 00:42:46 SkyScan query done: ret=0 az=153.18<-10212 ze=-21.96<-13464 Statuses=0009 0009 00:42:46 Msec=0 True Az=153.18 Ze=-21.96 Az status=0009 Ze status=0009 00:42:46 Check angles 00:42:46 SkyScan query 00:42:46 SkyScan query done: ret=0 az=135.735<-9049 ze=-0.99<-12066 Statuses=0009 0009 00:42:46 Msec=750 True Az=135.735 Ze=-0.99 Az status=0009 Ze status=0009 00:42:46 Check angles 00:42:46 SkyScan query 00:42:47 SkyScan query done: ret=0 az=118.26<-7884 ze=19.965<-10669 Statuses=0009 0009 00:42:47 Msec=1500 True Az=118.26 Ze=19.965 Az status=0009 Ze status=0009 00:42:47 Check angles 00:42:47 SkyScan query 00:42:48 SkyScan query done: ret=0 az=100.815<-6721 ze=40.905<-9273 Statuses=0009 0009 00:42:48 Msec=2250 True Az=100.815 Ze=40.905 Az status=0009 Ze status=0009 00:42:48 Check angles 00:42:48 SkyScan query 00:42:49 SkyScan query done: ret=0 az=86.01<-5734 ze=51.555<-8563 Statuses=0009 0008 00:42:49 Msec=3000 True Az=86.01 Ze=51.555 Az status=0009 Ze status=0008 00:42:49 Check angles 00:42:49 SkyScan query 00:42:49 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:42:49 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:42:49 Message to Master queued w/err=0: serial=18253 error=0 00:42:54 Received message from Master: op=Filter serial=18254 00:42:54 Color wheel filter change from 0 to 0 00:42:54 FLIGetFilterPos err=0 currentPosition=0 00:42:54 FLIGetStepsRemaining err=0 RemainingSteps=0 00:42:54 Filter is already there-color wheel unchanged 00:42:55 Received message from Master: op=Shutter serial=18255 00:42:55 Shutter LASER close 00:42:55 Received message from Camera: op=State serial=18257 00:42:55 GetSingleValue result=40 Value=cccccccc 00:42:55 SkyScan query 00:42:55 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:42:55 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:55 Parameters OK 00:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:55 Set A/D data flow result=40 00:42:55 Set A/D channel type result=40 00:42:55 Set A/D encoding result=40 00:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:55 Set channel filter=0.000000e+000 result=40 00:42:55 Config A/D Result=40 00:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:55 Get A/D filter: -9.255963e+061 result=40 00:42:55 Get A/D value=-858993460 result=40 00:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:55 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:42:55 Parameters OK 00:42:55 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:42:55 Set A/D data flow result=40 00:42:55 Set A/D channel type result=40 00:42:55 Set A/D encoding result=40 00:42:55 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:42:55 Set channel filter=0.000000e+000 result=40 00:42:55 Config A/D Result=40 00:42:55 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:42:55 Get A/D filter: -9.255963e+061 result=40 00:42:55 Get A/D value=-858993460 result=40 00:42:55 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:42:55 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:42:55 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:42:55 Aux= 00:42:55 Message to Camera, serial 18257 queued 00:43:26 Received message from Master: op=PointingHead serial=18264 00:43:26 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:43:26 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:43:26 Point started: ret=0 00:43:26 point_skyscan result=0 00:43:27 Check angles 00:43:27 SkyScan query 00:43:28 SkyScan query done: ret=0 az=109.155<-7277 ze=38.49<-9434 Statuses=0009 0008 00:43:28 Msec=0 True Az=109.155 Ze=38.49 Az status=0009 Ze status=0008 00:43:28 Check angles 00:43:28 SkyScan query 00:43:28 SkyScan query done: ret=0 az=126.57<-8438 ze=38.505<-9433 Statuses=0009 0008 00:43:28 Msec=750 True Az=126.57 Ze=38.505 Az status=0009 Ze status=0008 00:43:29 Check angles 00:43:29 SkyScan query 00:43:29 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 00:43:29 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 00:43:29 Check angles 00:43:29 SkyScan query 00:43:30 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 00:43:30 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 00:43:30 Check angles 00:43:30 SkyScan query 00:43:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:43:31 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:43:31 Check angles 00:43:31 SkyScan query 00:43:31 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:43:31 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:43:31 Message to Master queued w/err=0: serial=18264 error=0 00:43:36 Received message from Master: op=Filter serial=18265 00:43:36 Color wheel filter change from 0 to 0 00:43:36 FLIGetFilterPos err=0 currentPosition=0 00:43:36 FLIGetStepsRemaining err=0 RemainingSteps=0 00:43:36 Filter is already there-color wheel unchanged 00:43:37 Received message from Master: op=Shutter serial=18266 00:43:37 Shutter LASER close 00:43:37 Received message from Camera: op=State serial=18268 00:43:37 GetSingleValue result=40 Value=cccccccc 00:43:37 SkyScan query 00:43:37 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:43:37 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:37 Parameters OK 00:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:37 Set A/D data flow result=40 00:43:37 Set A/D channel type result=40 00:43:37 Set A/D encoding result=40 00:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:37 Set channel filter=0.000000e+000 result=40 00:43:37 Config A/D Result=40 00:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:37 Get A/D filter: -9.255963e+061 result=40 00:43:37 Get A/D value=-858993460 result=40 00:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:37 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:43:37 Parameters OK 00:43:37 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:43:37 Set A/D data flow result=40 00:43:37 Set A/D channel type result=40 00:43:37 Set A/D encoding result=40 00:43:37 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:43:37 Set channel filter=0.000000e+000 result=40 00:43:37 Config A/D Result=40 00:43:37 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:43:37 Get A/D filter: -9.255963e+061 result=40 00:43:37 Get A/D value=-858993460 result=40 00:43:37 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:43:37 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:43:37 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:43:37 Aux= 00:43:37 Message to Camera, serial 18268 queued 00:44:08 Received message from Master: op=PointingHead serial=18275 00:44:08 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:44:08 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:44:08 Point started: ret=0 00:44:08 point_skyscan result=0 00:44:09 Check angles 00:44:09 SkyScan query 00:44:10 SkyScan query done: ret=0 az=152.97<-10198 ze=8.73<-11418 Statuses=0009 0009 00:44:10 Msec=0 True Az=152.97 Ze=8.73 Az status=0009 Ze status=0009 00:44:10 Check angles 00:44:10 SkyScan query 00:44:11 SkyScan query done: ret=0 az=135.15<-9010 ze=-12.66<-12844 Statuses=0009 0009 00:44:11 Msec=750 True Az=135.15 Ze=-12.66 Az status=0009 Ze status=0009 00:44:11 Check angles 00:44:11 SkyScan query 00:44:11 SkyScan query done: ret=0 az=117.615<-7841 ze=-33.585<-14239 Statuses=0009 0009 00:44:11 Msec=1500 True Az=117.615 Ze=-33.585 Az status=0009 Ze status=0009 00:44:11 Check angles 00:44:11 SkyScan query 00:44:12 SkyScan query done: ret=0 az=100.23<-6682 ze=-51.54<-15436 Statuses=0009 0009 00:44:12 Msec=2250 True Az=100.23 Ze=-51.54 Az status=0009 Ze status=0009 00:44:12 Check angles 00:44:12 SkyScan query 00:44:13 SkyScan query done: ret=0 az=86.025<-5735 ze=-51.54<-15436 Statuses=0009 0008 00:44:13 Msec=3000 True Az=86.025 Ze=-51.54 Az status=0009 Ze status=0008 00:44:13 Check angles 00:44:13 SkyScan query 00:44:14 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:44:14 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:44:14 Message to Master queued w/err=0: serial=18275 error=0 00:44:19 Received message from Master: op=Filter serial=18276 00:44:19 Color wheel filter change from 0 to 0 00:44:19 FLIGetFilterPos err=0 currentPosition=0 00:44:19 FLIGetStepsRemaining err=0 RemainingSteps=0 00:44:19 Filter is already there-color wheel unchanged 00:44:19 Received message from Master: op=Shutter serial=18277 00:44:19 Shutter LASER close 00:44:19 Received message from Camera: op=State serial=18279 00:44:19 GetSingleValue result=40 Value=cccccccc 00:44:19 SkyScan query 00:44:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:44:19 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:19 Parameters OK 00:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:19 Set A/D data flow result=40 00:44:19 Set A/D channel type result=40 00:44:19 Set A/D encoding result=40 00:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:19 Set channel filter=0.000000e+000 result=40 00:44:19 Config A/D Result=40 00:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:19 Get A/D filter: -9.255963e+061 result=40 00:44:19 Get A/D value=-858993460 result=40 00:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:19 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:44:19 Parameters OK 00:44:19 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:44:19 Set A/D data flow result=40 00:44:19 Set A/D channel type result=40 00:44:19 Set A/D encoding result=40 00:44:19 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:44:19 Set channel filter=0.000000e+000 result=40 00:44:19 Config A/D Result=40 00:44:19 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:44:19 Get A/D filter: -9.255963e+061 result=40 00:44:19 Get A/D value=-858993460 result=40 00:44:19 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:44:19 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:44:19 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:44:19 Aux= 00:44:19 Message to Camera, serial 18279 queued 00:44:50 Received message from Master: op=PointingHead serial=18286 00:44:50 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:44:50 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:44:51 Point started: ret=0 00:44:51 point_skyscan result=0 00:44:51 Check angles 00:44:51 SkyScan query 00:44:52 SkyScan query done: ret=0 az=109.68<-7312 ze=-81.81<-17454 Statuses=0009 0009 00:44:52 Msec=0 True Az=109.68 Ze=-81.81 Az status=0009 Ze status=0009 00:44:52 Check angles 00:44:52 SkyScan query 00:44:53 SkyScan query done: ret=0 az=113.025<-7535 ze=-103.17<-18878 Statuses=0008 0009 00:44:53 Msec=750 True Az=113.025 Ze=-103.17 Az status=0008 Ze status=0009 00:44:53 Check angles 00:44:53 SkyScan query 00:44:53 SkyScan query done: ret=0 az=112.995<-7533 ze=-124.14<-20276 Statuses=0008 0009 00:44:53 Msec=1500 True Az=112.995 Ze=-124.14 Az status=0008 Ze status=0009 00:44:54 Check angles 00:44:54 SkyScan query 00:44:54 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.08<-21672 Statuses=0008 0009 00:44:54 Msec=2250 True Az=112.995 Ze=-145.08 Az status=0008 Ze status=0009 00:44:54 Check angles 00:44:54 SkyScan query 00:44:55 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.47<-23098 Statuses=0008 0009 00:44:55 Msec=3000 True Az=112.995 Ze=-166.47 Az status=0008 Ze status=0009 00:44:55 Check angles 00:44:55 SkyScan query 00:44:56 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:44:56 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:44:56 Message to Master queued w/err=0: serial=18286 error=0 00:45:01 Received message from Master: op=Filter serial=18287 00:45:01 Color wheel filter change from 0 to 0 00:45:01 FLIGetFilterPos err=0 currentPosition=0 00:45:01 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:01 Filter is already there-color wheel unchanged 00:45:01 Received message from Master: op=Shutter serial=18288 00:45:01 Shutter LASER open 00:45:01 Received message from Camera: op=State serial=18290 00:45:01 GetSingleValue result=40 Value=cccccccc 00:45:01 SkyScan query 00:45:02 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:45:02 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:02 Parameters OK 00:45:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:02 Set A/D data flow result=40 00:45:02 Set A/D channel type result=40 00:45:02 Set A/D encoding result=40 00:45:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:02 Set channel filter=0.000000e+000 result=40 00:45:02 Config A/D Result=40 00:45:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:02 Get A/D filter: -9.255963e+061 result=40 00:45:02 Get A/D value=-858993460 result=40 00:45:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:02 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:02 Parameters OK 00:45:02 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:02 Set A/D data flow result=40 00:45:02 Set A/D channel type result=40 00:45:02 Set A/D encoding result=40 00:45:02 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:02 Set channel filter=0.000000e+000 result=40 00:45:02 Config A/D Result=40 00:45:02 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:02 Get A/D filter: -9.255963e+061 result=40 00:45:02 Get A/D value=-858993460 result=40 00:45:02 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:02 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:02 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:02 Aux= 00:45:02 Message to Camera, serial 18290 queued 00:45:04 Received message from Master: op=Shutter serial=18294 00:45:04 Shutter LASER close 00:45:04 Received message from Master: op=PointingHead serial=18298 00:45:04 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:45:04 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:45:05 Point started: ret=0 00:45:05 point_skyscan result=0 00:45:06 Check angles 00:45:06 SkyScan query 00:45:06 SkyScan query done: ret=0 az=89.835<-5989 ze=157.17<-1522 Statuses=0009 0009 00:45:06 Msec=0 True Az=89.835 Ze=157.17 Az status=0009 Ze status=0009 00:45:06 Check angles 00:45:06 SkyScan query 00:45:07 SkyScan query done: ret=0 az=72.375<-4825 ze=136.185<-2921 Statuses=0009 0009 00:45:07 Msec=750 True Az=72.375 Ze=136.185 Az status=0009 Ze status=0009 00:45:07 Check angles 00:45:07 SkyScan query 00:45:08 SkyScan query done: ret=0 az=54.915<-3661 ze=115.26<-4316 Statuses=0009 0009 00:45:08 Msec=1500 True Az=54.915 Ze=115.26 Az status=0009 Ze status=0009 00:45:08 Check angles 00:45:08 SkyScan query 00:45:08 SkyScan query done: ret=0 az=41.01<-2734 ze=94.29<-5714 Statuses=0009 0009 00:45:08 Msec=2250 True Az=41.01 Ze=94.29 Az status=0009 Ze status=0009 00:45:09 Check angles 00:45:09 SkyScan query 00:45:09 SkyScan query done: ret=0 az=40.995<-2733 ze=73.335<-7111 Statuses=0008 0009 00:45:09 Msec=3000 True Az=40.995 Ze=73.335 Az status=0008 Ze status=0009 00:45:09 Check angles 00:45:09 SkyScan query 00:45:10 SkyScan query done: ret=0 az=40.995<-2733 ze=52.5<-8500 Statuses=0008 0009 00:45:10 Msec=3750 True Az=40.995 Ze=52.5 Az status=0008 Ze status=0009 00:45:10 Check angles 00:45:10 SkyScan query 00:45:11 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:45:11 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:45:11 Message to Master queued w/err=0: serial=18298 error=0 00:45:16 Received message from Master: op=Filter serial=18299 00:45:16 Color wheel filter change from 0 to 0 00:45:16 FLIGetFilterPos err=0 currentPosition=0 00:45:16 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:16 Filter is already there-color wheel unchanged 00:45:16 Received message from Master: op=Shutter serial=18300 00:45:16 Shutter LASER close 00:45:16 Received message from Camera: op=State serial=18302 00:45:16 GetSingleValue result=40 Value=cccccccc 00:45:16 SkyScan query 00:45:17 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:45:17 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:17 Parameters OK 00:45:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:17 Set A/D data flow result=40 00:45:17 Set A/D channel type result=40 00:45:17 Set A/D encoding result=40 00:45:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:17 Set channel filter=0.000000e+000 result=40 00:45:17 Config A/D Result=40 00:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:17 Get A/D filter: -9.255963e+061 result=40 00:45:17 Get A/D value=-858993460 result=40 00:45:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:17 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:17 Parameters OK 00:45:17 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:17 Set A/D data flow result=40 00:45:17 Set A/D channel type result=40 00:45:17 Set A/D encoding result=40 00:45:17 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:17 Set channel filter=0.000000e+000 result=40 00:45:17 Config A/D Result=40 00:45:17 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:17 Get A/D filter: -9.255963e+061 result=40 00:45:17 Get A/D value=-858993460 result=40 00:45:17 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:17 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:17 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:17 Aux= 00:45:17 Message to Camera, serial 18302 queued 00:45:47 Received message from Master: op=PointingHead serial=18309 00:45:47 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:45:47 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:45:48 Point started: ret=0 00:45:48 point_skyscan result=0 00:45:49 Check angles 00:45:49 SkyScan query 00:45:49 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 00:45:49 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 00:45:49 Check angles 00:45:49 SkyScan query 00:45:50 SkyScan query done: ret=0 az=81.96<-5464 ze=66.495<-7567 Statuses=0009 0008 00:45:50 Msec=750 True Az=81.96 Ze=66.495 Az status=0009 Ze status=0008 00:45:50 Check angles 00:45:50 SkyScan query 00:45:51 SkyScan query done: ret=0 az=99.585<-6639 ze=66.495<-7567 Statuses=0009 0008 00:45:51 Msec=1500 True Az=99.585 Ze=66.495 Az status=0009 Ze status=0008 00:45:51 Check angles 00:45:51 SkyScan query 00:45:51 SkyScan query done: ret=0 az=116.985<-7799 ze=66.495<-7567 Statuses=0009 0008 00:45:51 Msec=2250 True Az=116.985 Ze=66.495 Az status=0009 Ze status=0008 00:45:52 Check angles 00:45:52 SkyScan query 00:45:52 SkyScan query done: ret=0 az=134.475<-8965 ze=66.495<-7567 Statuses=0009 0008 00:45:52 Msec=3000 True Az=134.475 Ze=66.495 Az status=0009 Ze status=0008 00:45:52 Check angles 00:45:52 SkyScan query 00:45:53 SkyScan query done: ret=0 az=151.695<-10113 ze=66.495<-7567 Statuses=0009 0008 00:45:53 Msec=3750 True Az=151.695 Ze=66.495 Az status=0009 Ze status=0008 00:45:53 Check angles 00:45:53 SkyScan query 00:45:54 SkyScan query done: ret=0 az=158.025<-10535 ze=66.495<-7567 Statuses=0008 0008 00:45:54 Msec=4500 True Az=158.025 Ze=66.495 Az status=0008 Ze status=0008 00:45:54 Message to Master queued w/err=0: serial=18309 error=0 00:45:59 Received message from Master: op=Filter serial=18310 00:45:59 Color wheel filter change from 0 to 0 00:45:59 FLIGetFilterPos err=0 currentPosition=0 00:45:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:45:59 Filter is already there-color wheel unchanged 00:45:59 Received message from Master: op=Shutter serial=18311 00:45:59 Shutter LASER close 00:45:59 Received message from Camera: op=State serial=18313 00:45:59 GetSingleValue result=40 Value=cccccccc 00:45:59 SkyScan query 00:45:59 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:45:59 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:59 Parameters OK 00:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:59 Set A/D data flow result=40 00:45:59 Set A/D channel type result=40 00:45:59 Set A/D encoding result=40 00:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:59 Set channel filter=0.000000e+000 result=40 00:45:59 Config A/D Result=40 00:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:59 Get A/D filter: -9.255963e+061 result=40 00:45:59 Get A/D value=-858993460 result=40 00:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:59 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:45:59 Parameters OK 00:45:59 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:45:59 Set A/D data flow result=40 00:45:59 Set A/D channel type result=40 00:45:59 Set A/D encoding result=40 00:45:59 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:45:59 Set channel filter=0.000000e+000 result=40 00:45:59 Config A/D Result=40 00:45:59 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:45:59 Get A/D filter: -9.255963e+061 result=40 00:45:59 Get A/D value=-858993460 result=40 00:45:59 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:45:59 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:45:59 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:45:59 Aux= 00:45:59 Message to Camera, serial 18313 queued 00:46:30 Received message from Master: op=PointingHead serial=18320 00:46:30 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=-4.500000e+001 (-3.850000e+001) 00:46:30 SkyScan point: az=41->2733 ze=-38.5->14567 Resp=0 00:46:31 Point started: ret=0 00:46:31 point_skyscan result=0 00:46:31 Check angles 00:46:31 SkyScan query 00:46:32 SkyScan query done: ret=0 az=134.85<-8990 ze=36.585<-9561 Statuses=0009 0009 00:46:32 Msec=0 True Az=134.85 Ze=36.585 Az status=0009 Ze status=0009 00:46:32 Check angles 00:46:32 SkyScan query 00:46:33 SkyScan query done: ret=0 az=117.06<-7804 ze=15.21<-10986 Statuses=0009 0009 00:46:33 Msec=750 True Az=117.06 Ze=15.21 Az status=0009 Ze status=0009 00:46:33 Check angles 00:46:33 SkyScan query 00:46:34 SkyScan query done: ret=0 az=99.255<-6617 ze=-6.18<-12412 Statuses=0009 0009 00:46:34 Msec=1500 True Az=99.255 Ze=-6.18 Az status=0009 Ze status=0009 00:46:34 Check angles 00:46:34 SkyScan query 00:46:34 SkyScan query done: ret=0 az=81.48<-5432 ze=-27.585<-13839 Statuses=0009 0009 00:46:34 Msec=2250 True Az=81.48 Ze=-27.585 Az status=0009 Ze status=0009 00:46:34 Check angles 00:46:34 SkyScan query 00:46:35 SkyScan query done: ret=0 az=64.02<-4268 ze=-38.565<-14571 Statuses=0009 0008 00:46:35 Msec=3000 True Az=64.02 Ze=-38.565 Az status=0009 Ze status=0008 00:46:35 Check angles 00:46:35 SkyScan query 00:46:36 SkyScan query done: ret=0 az=46.575<-3105 ze=-38.535<-14569 Statuses=0009 0008 00:46:36 Msec=3750 True Az=46.575 Ze=-38.535 Az status=0009 Ze status=0008 00:46:36 Check angles 00:46:36 SkyScan query 00:46:37 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:46:37 Msec=4500 True Az=40.995 Ze=-38.505 Az status=0008 Ze status=0008 00:46:37 Message to Master queued w/err=0: serial=18320 error=0 00:46:42 Received message from Master: op=Filter serial=18321 00:46:42 Color wheel filter change from 0 to 0 00:46:42 FLIGetFilterPos err=0 currentPosition=0 00:46:42 FLIGetStepsRemaining err=0 RemainingSteps=0 00:46:42 Filter is already there-color wheel unchanged 00:46:42 Received message from Master: op=Shutter serial=18322 00:46:42 Shutter LASER close 00:46:42 Received message from Camera: op=State serial=18324 00:46:42 GetSingleValue result=40 Value=cccccccc 00:46:42 SkyScan query 00:46:42 SkyScan query done: ret=0 az=40.995<-2733 ze=-38.505<-14567 Statuses=0008 0008 00:46:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:42 Parameters OK 00:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:42 Set A/D data flow result=40 00:46:42 Set A/D channel type result=40 00:46:42 Set A/D encoding result=40 00:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:42 Set channel filter=0.000000e+000 result=40 00:46:42 Config A/D Result=40 00:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:42 Get A/D filter: -9.255963e+061 result=40 00:46:42 Get A/D value=-858993460 result=40 00:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:46:42 Parameters OK 00:46:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:46:42 Set A/D data flow result=40 00:46:42 Set A/D channel type result=40 00:46:42 Set A/D encoding result=40 00:46:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:46:42 Set channel filter=0.000000e+000 result=40 00:46:42 Config A/D Result=40 00:46:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:46:42 Get A/D filter: -9.255963e+061 result=40 00:46:42 Get A/D value=-858993460 result=40 00:46:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:46:42 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=-38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:46:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:46:42 Aux= 00:46:42 Message to Camera, serial 18324 queued 00:47:13 Received message from Master: op=PointingHead serial=18331 00:47:13 Move0 PH to az=-4.500000e+001 (-4.900000e+001) zen=1.350000e+002 (1.415000e+002) 00:47:13 SkyScan point: az=-49->8733 ze=141.5->21433 Resp=0 00:47:13 Point started: ret=0 00:47:13 point_skyscan result=0 00:47:14 Check angles 00:47:14 SkyScan query 00:47:15 SkyScan query done: ret=0 az=63.87<-4258 ze=-68.16<-16544 Statuses=0009 0009 00:47:15 Msec=0 True Az=63.87 Ze=-68.16 Az status=0009 Ze status=0009 00:47:15 Check angles 00:47:15 SkyScan query 00:47:16 SkyScan query done: ret=0 az=81.855<-5457 ze=-89.535<-17969 Statuses=0009 0009 00:47:16 Msec=750 True Az=81.855 Ze=-89.535 Az status=0009 Ze status=0009 00:47:16 Check angles 00:47:16 SkyScan query 00:47:16 SkyScan query done: ret=0 az=99.27<-6618 ze=-110.505<-19367 Statuses=0009 0009 00:47:16 Msec=1500 True Az=99.27 Ze=-110.505 Az status=0009 Ze status=0009 00:47:17 Check angles 00:47:17 SkyScan query 00:47:17 SkyScan query done: ret=0 az=116.97<-7798 ze=-131.88<-20792 Statuses=0009 0009 00:47:17 Msec=2250 True Az=116.97 Ze=-131.88 Az status=0009 Ze status=0009 00:47:17 Check angles 00:47:17 SkyScan query 00:47:18 SkyScan query done: ret=0 az=131.085<-8739 ze=-141.525<-21435 Statuses=0009 0008 00:47:18 Msec=3000 True Az=131.085 Ze=-141.525 Az status=0009 Ze status=0008 00:47:18 Check angles 00:47:18 SkyScan query 00:47:19 SkyScan query done: ret=0 az=131.01<-8734 ze=-141.525<-21435 Statuses=0008 0008 00:47:19 Msec=3750 True Az=131.01 Ze=-141.525 Az status=0008 Ze status=0008 00:47:19 Message to Master queued w/err=0: serial=18331 error=0 00:47:24 Received message from Master: op=Filter serial=18332 00:47:24 Color wheel filter change from 0 to 0 00:47:24 FLIGetFilterPos err=0 currentPosition=0 00:47:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:47:24 Filter is already there-color wheel unchanged 00:47:24 Received message from Master: op=Shutter serial=18333 00:47:24 Shutter LASER close 00:47:24 Received message from Camera: op=State serial=18335 00:47:24 GetSingleValue result=40 Value=cccccccc 00:47:24 SkyScan query 00:47:24 SkyScan query done: ret=0 az=130.995<-8733 ze=-141.495<-21433 Statuses=0008 0008 00:47:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:24 Parameters OK 00:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:24 Set A/D data flow result=40 00:47:24 Set A/D channel type result=40 00:47:24 Set A/D encoding result=40 00:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:24 Set channel filter=0.000000e+000 result=40 00:47:24 Config A/D Result=40 00:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:24 Get A/D filter: -9.255963e+061 result=40 00:47:24 Get A/D value=-858993460 result=40 00:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:47:24 Parameters OK 00:47:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:47:24 Set A/D data flow result=40 00:47:24 Set A/D channel type result=40 00:47:24 Set A/D encoding result=40 00:47:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:47:24 Set channel filter=0.000000e+000 result=40 00:47:24 Config A/D Result=40 00:47:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:47:24 Get A/D filter: -9.255963e+061 result=40 00:47:24 Get A/D value=-858993460 result=40 00:47:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:47:24 PH type=1 Digital in=000000 Instrument Az=130.994995 deg Ze=-141.494995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:47:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:47:24 Aux= 00:47:24 Message to Camera, serial 18335 queued 00:47:55 Received message from Master: op=PointingHead serial=18342 00:47:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:47:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:47:56 Point started: ret=0 00:47:56 point_skyscan result=0 00:47:56 Check angles 00:47:56 SkyScan query 00:47:57 SkyScan query done: ret=0 az=113.025<-7535 ze=-170.955<-23397 Statuses=0009 0009 00:47:57 Msec=0 True Az=113.025 Ze=-170.955 Az status=0009 Ze status=0009 00:47:57 Check angles 00:47:57 SkyScan query 00:47:58 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.01<-23534 Statuses=0008 0008 00:47:58 Msec=750 True Az=112.995 Ze=-173.01 Az status=0008 Ze status=0008 00:47:58 Message to Master queued w/err=0: serial=18342 error=0 00:48:03 Received message from Master: op=Filter serial=18343 00:48:03 Color wheel filter change from 0 to 0 00:48:03 FLIGetFilterPos err=0 currentPosition=0 00:48:03 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:03 Filter is already there-color wheel unchanged 00:48:03 Received message from Master: op=Shutter serial=18344 00:48:03 Shutter LASER open 00:48:03 Received message from Camera: op=State serial=18346 00:48:03 GetSingleValue result=40 Value=cccccccc 00:48:03 SkyScan query 00:48:04 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:48:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:04 Parameters OK 00:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:04 Set A/D data flow result=40 00:48:04 Set A/D channel type result=40 00:48:04 Set A/D encoding result=40 00:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:04 Set channel filter=0.000000e+000 result=40 00:48:04 Config A/D Result=40 00:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:04 Get A/D filter: -9.255963e+061 result=40 00:48:04 Get A/D value=-858993460 result=40 00:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:04 Parameters OK 00:48:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:04 Set A/D data flow result=40 00:48:04 Set A/D channel type result=40 00:48:04 Set A/D encoding result=40 00:48:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:04 Set channel filter=0.000000e+000 result=40 00:48:04 Config A/D Result=40 00:48:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:04 Get A/D filter: -9.255963e+061 result=40 00:48:04 Get A/D value=-858993460 result=40 00:48:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:04 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:04 Aux= 00:48:04 Message to Camera, serial 18346 queued 00:48:06 Received message from Master: op=Shutter serial=18350 00:48:06 Shutter LASER close 00:48:07 Received message from Master: op=PointingHead serial=18354 00:48:07 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=4.500000e+001 (5.150000e+001) 00:48:07 SkyScan point: az=-4->11733 ze=51.5->15433 Resp=0 00:48:07 Point started: ret=0 00:48:07 point_skyscan result=0 00:48:08 Check angles 00:48:08 SkyScan query 00:48:08 SkyScan query done: ret=0 az=135.855<-9057 ze=-143.295<-21553 Statuses=0009 0009 00:48:08 Msec=0 True Az=135.855 Ze=-143.295 Az status=0009 Ze status=0009 00:48:08 Check angles 00:48:08 SkyScan query 00:48:09 SkyScan query done: ret=0 az=153.735<-10249 ze=-121.89<-20126 Statuses=0009 0009 00:48:09 Msec=750 True Az=153.735 Ze=-121.89 Az status=0009 Ze status=0009 00:48:09 Check angles 00:48:09 SkyScan query 00:48:10 SkyScan query done: ret=0 az=171.27<-11418 ze=-100.965<-18731 Statuses=0009 0009 00:48:10 Msec=1500 True Az=171.27 Ze=-100.965 Az status=0009 Ze status=0009 00:48:10 Check angles 00:48:10 SkyScan query 00:48:11 SkyScan query done: ret=0 az=176.025<-11735 ze=-80.01<-17334 Statuses=0008 0009 00:48:11 Msec=2250 True Az=176.025 Ze=-80.01 Az status=0008 Ze status=0009 00:48:11 Check angles 00:48:11 SkyScan query 00:48:11 SkyScan query done: ret=0 az=175.995<-11733 ze=-59.04<-15936 Statuses=0008 0009 00:48:11 Msec=3000 True Az=175.995 Ze=-59.04 Az status=0008 Ze status=0009 00:48:11 Check angles 00:48:11 SkyScan query 00:48:12 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.45<-15430 Statuses=0008 0008 00:48:12 Msec=3750 True Az=175.995 Ze=-51.45 Az status=0008 Ze status=0008 00:48:12 Message to Master queued w/err=0: serial=18354 error=0 00:48:17 Received message from Master: op=Filter serial=18355 00:48:17 Color wheel filter change from 0 to 0 00:48:17 FLIGetFilterPos err=0 currentPosition=0 00:48:17 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:17 Filter is already there-color wheel unchanged 00:48:17 Received message from Master: op=Shutter serial=18356 00:48:17 Shutter LASER close 00:48:17 Received message from Camera: op=State serial=18358 00:48:17 GetSingleValue result=40 Value=cccccccc 00:48:17 SkyScan query 00:48:18 SkyScan query done: ret=0 az=175.995<-11733 ze=-51.495<-15433 Statuses=0008 0008 00:48:18 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:18 Parameters OK 00:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:18 Set A/D data flow result=40 00:48:18 Set A/D channel type result=40 00:48:18 Set A/D encoding result=40 00:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:18 Set channel filter=0.000000e+000 result=40 00:48:18 Config A/D Result=40 00:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:18 Get A/D filter: -9.255963e+061 result=40 00:48:18 Get A/D value=-858993460 result=40 00:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:18 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:48:18 Parameters OK 00:48:18 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:48:18 Set A/D data flow result=40 00:48:18 Set A/D channel type result=40 00:48:18 Set A/D encoding result=40 00:48:18 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:48:18 Set channel filter=0.000000e+000 result=40 00:48:18 Config A/D Result=40 00:48:18 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:48:18 Get A/D filter: -9.255963e+061 result=40 00:48:18 Get A/D value=-858993460 result=40 00:48:18 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:48:18 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:48:18 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:48:18 Aux= 00:48:18 Message to Camera, serial 18358 queued 00:48:49 Received message from Master: op=PointingHead serial=18365 00:48:49 Move0 PH to az=9.000000e+001 (8.600000e+001) zen=4.500000e+001 (5.150000e+001) 00:48:49 SkyScan point: az=86->5733 ze=51.5->8567 Resp=0 00:48:49 Point started: ret=0 00:48:49 point_skyscan result=0 00:48:50 Check angles 00:48:50 SkyScan query 00:48:51 SkyScan query done: ret=0 az=152.76<-10184 ze=-21.57<-13438 Statuses=0009 0009 00:48:51 Msec=0 True Az=152.76 Ze=-21.57 Az status=0009 Ze status=0009 00:48:51 Check angles 00:48:51 SkyScan query 00:48:51 SkyScan query done: ret=0 az=135.42<-9028 ze=-0.585<-12039 Statuses=0009 0009 00:48:51 Msec=750 True Az=135.42 Ze=-0.585 Az status=0009 Ze status=0009 00:48:52 Check angles 00:48:52 SkyScan query 00:48:52 SkyScan query done: ret=0 az=117.78<-7852 ze=20.355<-10643 Statuses=0009 0009 00:48:52 Msec=1500 True Az=117.78 Ze=20.355 Az status=0009 Ze status=0009 00:48:52 Check angles 00:48:52 SkyScan query 00:48:53 SkyScan query done: ret=0 az=100.095<-6673 ze=41.745<-9217 Statuses=0009 0009 00:48:53 Msec=2250 True Az=100.095 Ze=41.745 Az status=0009 Ze status=0009 00:48:53 Check angles 00:48:53 SkyScan query 00:48:54 SkyScan query done: ret=0 az=86.025<-5735 ze=51.555<-8563 Statuses=0009 0008 00:48:54 Msec=3000 True Az=86.025 Ze=51.555 Az status=0009 Ze status=0008 00:48:54 Check angles 00:48:54 SkyScan query 00:48:54 SkyScan query done: ret=0 az=85.995<-5733 ze=51.51<-8566 Statuses=0008 0008 00:48:54 Msec=3750 True Az=85.995 Ze=51.51 Az status=0008 Ze status=0008 00:48:54 Message to Master queued w/err=0: serial=18365 error=0 00:48:59 Received message from Master: op=Filter serial=18366 00:48:59 Color wheel filter change from 0 to 0 00:48:59 FLIGetFilterPos err=0 currentPosition=0 00:48:59 FLIGetStepsRemaining err=0 RemainingSteps=0 00:48:59 Filter is already there-color wheel unchanged 00:49:00 Received message from Master: op=Shutter serial=18367 00:49:00 Shutter LASER close 00:49:00 Received message from Camera: op=State serial=18369 00:49:00 GetSingleValue result=40 Value=cccccccc [UTC 2018-12-4 00:49:00] 00:49:00 SkyScan query 00:49:00 SkyScan query done: ret=0 az=85.995<-5733 ze=51.495<-8567 Statuses=0008 0008 00:49:00 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:00 Parameters OK 00:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:00 Set A/D data flow result=40 00:49:00 Set A/D channel type result=40 00:49:00 Set A/D encoding result=40 00:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:00 Set channel filter=0.000000e+000 result=40 00:49:00 Config A/D Result=40 00:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:00 Get A/D filter: -9.255963e+061 result=40 00:49:00 Get A/D value=-858993460 result=40 00:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:00 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:00 Parameters OK 00:49:00 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:00 Set A/D data flow result=40 00:49:00 Set A/D channel type result=40 00:49:00 Set A/D encoding result=40 00:49:00 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:00 Set channel filter=0.000000e+000 result=40 00:49:00 Config A/D Result=40 00:49:00 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:00 Get A/D filter: -9.255963e+061 result=40 00:49:00 Get A/D value=-858993460 result=40 00:49:00 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:00 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:00 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:00 Aux= 00:49:00 Message to Camera, serial 18369 queued 00:49:31 Received message from Master: op=PointingHead serial=18376 00:49:31 Move0 PH to az=0.000000e+000 (-4.000000e+000) zen=-4.500000e+001 (-3.850000e+001) 00:49:31 SkyScan point: az=-4->11733 ze=-38.5->9433 Resp=0 00:49:31 Point started: ret=0 00:49:31 point_skyscan result=0 00:49:32 Check angles 00:49:32 SkyScan query 00:49:33 SkyScan query done: ret=0 az=108.735<-7249 ze=38.49<-9434 Statuses=0009 0008 00:49:33 Msec=0 True Az=108.735 Ze=38.49 Az status=0009 Ze status=0008 00:49:33 Check angles 00:49:33 SkyScan query 00:49:33 SkyScan query done: ret=0 az=126.585<-8439 ze=38.505<-9433 Statuses=0009 0008 00:49:33 Msec=750 True Az=126.585 Ze=38.505 Az status=0009 Ze status=0008 00:49:34 Check angles 00:49:34 SkyScan query 00:49:34 SkyScan query done: ret=0 az=144.03<-9602 ze=38.505<-9433 Statuses=0009 0008 00:49:34 Msec=1500 True Az=144.03 Ze=38.505 Az status=0009 Ze status=0008 00:49:34 Check angles 00:49:34 SkyScan query 00:49:35 SkyScan query done: ret=0 az=161.445<-10763 ze=38.505<-9433 Statuses=0009 0008 00:49:35 Msec=2250 True Az=161.445 Ze=38.505 Az status=0009 Ze status=0008 00:49:35 Check angles 00:49:35 SkyScan query 00:49:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0009 0008 00:49:36 Msec=3000 True Az=176.01 Ze=38.505 Az status=0009 Ze status=0008 00:49:36 Check angles 00:49:36 SkyScan query 00:49:36 SkyScan query done: ret=0 az=176.01<-11734 ze=38.505<-9433 Statuses=0008 0008 00:49:36 Msec=3750 True Az=176.01 Ze=38.505 Az status=0008 Ze status=0008 00:49:36 Message to Master queued w/err=0: serial=18376 error=0 00:49:41 Received message from Master: op=Filter serial=18377 00:49:41 Color wheel filter change from 0 to 0 00:49:41 FLIGetFilterPos err=0 currentPosition=0 00:49:41 FLIGetStepsRemaining err=0 RemainingSteps=0 00:49:41 Filter is already there-color wheel unchanged 00:49:42 Received message from Master: op=Shutter serial=18378 00:49:42 Shutter LASER close 00:49:42 Received message from Camera: op=State serial=18380 00:49:42 GetSingleValue result=40 Value=cccccccc 00:49:42 SkyScan query 00:49:42 SkyScan query done: ret=0 az=175.995<-11733 ze=38.505<-9433 Statuses=0008 0008 00:49:42 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:42 Parameters OK 00:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:42 Set A/D data flow result=40 00:49:42 Set A/D channel type result=40 00:49:42 Set A/D encoding result=40 00:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:42 Set channel filter=0.000000e+000 result=40 00:49:42 Config A/D Result=40 00:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:42 Get A/D filter: -9.255963e+061 result=40 00:49:42 Get A/D value=-858993460 result=40 00:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:42 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:49:42 Parameters OK 00:49:42 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:49:42 Set A/D data flow result=40 00:49:42 Set A/D channel type result=40 00:49:42 Set A/D encoding result=40 00:49:42 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:49:42 Set channel filter=0.000000e+000 result=40 00:49:42 Config A/D Result=40 00:49:42 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:49:42 Get A/D filter: -9.255963e+061 result=40 00:49:42 Get A/D value=-858993460 result=40 00:49:42 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:49:42 PH type=1 Digital in=000000 Instrument Az=175.994995 deg Ze=38.505001 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:49:42 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:49:42 Aux= 00:49:42 Message to Camera, serial 18380 queued 00:50:13 Received message from Master: op=PointingHead serial=18387 00:50:13 Move0 PH to az=-9.000000e+001 (-9.400000e+001) zen=4.500000e+001 (5.150000e+001) 00:50:13 SkyScan point: az=-94->5733 ze=51.5->15433 Resp=0 00:50:13 Point started: ret=0 00:50:13 point_skyscan result=0 00:50:14 Check angles 00:50:14 SkyScan query 00:50:15 SkyScan query done: ret=0 az=152.91<-10194 ze=8.565<-11429 Statuses=0009 0009 00:50:15 Msec=0 True Az=152.91 Ze=8.565 Az status=0009 Ze status=0009 00:50:15 Check angles 00:50:15 SkyScan query 00:50:16 SkyScan query done: ret=0 az=135.135<-9009 ze=-12.81<-12854 Statuses=0009 0009 00:50:16 Msec=750 True Az=135.135 Ze=-12.81 Az status=0009 Ze status=0009 00:50:16 Check angles 00:50:16 SkyScan query 00:50:16 SkyScan query done: ret=0 az=117.57<-7838 ze=-33.735<-14249 Statuses=0009 0009 00:50:16 Msec=1500 True Az=117.57 Ze=-33.735 Az status=0009 Ze status=0009 00:50:16 Check angles 00:50:16 SkyScan query 00:50:17 SkyScan query done: ret=0 az=99.825<-6655 ze=-51.555<-15437 Statuses=0009 0009 00:50:17 Msec=2250 True Az=99.825 Ze=-51.555 Az status=0009 Ze status=0009 00:50:17 Check angles 00:50:17 SkyScan query 00:50:18 SkyScan query done: ret=0 az=86.01<-5734 ze=-51.54<-15436 Statuses=0009 0008 00:50:18 Msec=3000 True Az=86.01 Ze=-51.54 Az status=0009 Ze status=0008 00:50:18 Check angles 00:50:18 SkyScan query 00:50:19 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:50:19 Msec=3750 True Az=85.995 Ze=-51.495 Az status=0008 Ze status=0008 00:50:19 Message to Master queued w/err=0: serial=18387 error=0 00:50:24 Received message from Master: op=Filter serial=18388 00:50:24 Color wheel filter change from 0 to 0 00:50:24 FLIGetFilterPos err=0 currentPosition=0 00:50:24 FLIGetStepsRemaining err=0 RemainingSteps=0 00:50:24 Filter is already there-color wheel unchanged 00:50:24 Received message from Master: op=Shutter serial=18389 00:50:24 Shutter LASER close 00:50:24 Received message from Camera: op=State serial=18391 00:50:24 GetSingleValue result=40 Value=cccccccc 00:50:24 SkyScan query 00:50:24 SkyScan query done: ret=0 az=85.995<-5733 ze=-51.495<-15433 Statuses=0008 0008 00:50:24 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:24 Parameters OK 00:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:24 Set A/D data flow result=40 00:50:24 Set A/D channel type result=40 00:50:24 Set A/D encoding result=40 00:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:24 Set channel filter=0.000000e+000 result=40 00:50:24 Config A/D Result=40 00:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:24 Get A/D filter: -9.255963e+061 result=40 00:50:24 Get A/D value=-858993460 result=40 00:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:24 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:50:24 Parameters OK 00:50:24 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:50:24 Set A/D data flow result=40 00:50:24 Set A/D channel type result=40 00:50:24 Set A/D encoding result=40 00:50:24 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:50:24 Set channel filter=0.000000e+000 result=40 00:50:24 Config A/D Result=40 00:50:24 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:50:24 Get A/D filter: -9.255963e+061 result=40 00:50:24 Get A/D value=-858993460 result=40 00:50:24 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:50:24 PH type=1 Digital in=000000 Instrument Az=85.995003 deg Ze=-51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:50:24 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:50:24 Aux= 00:50:24 Message to Camera, serial 18391 queued 00:50:55 Received message from Master: op=PointingHead serial=18398 00:50:55 Move0 PH to az=1.170000e+002 (1.130000e+002) zen=-1.795000e+002 (-1.730000e+002) 00:50:55 SkyScan point: az=113->7533 ze=-173->23533 Resp=0 00:50:56 Point started: ret=0 00:50:56 point_skyscan result=0 00:50:56 Check angles 00:50:56 SkyScan query 00:50:57 SkyScan query done: ret=0 az=109.38<-7292 ze=-81.75<-17450 Statuses=0009 0009 00:50:57 Msec=0 True Az=109.38 Ze=-81.75 Az status=0009 Ze status=0009 00:50:57 Check angles 00:50:57 SkyScan query 00:50:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-102.78<-18852 Statuses=0008 0009 00:50:58 Msec=750 True Az=113.01 Ze=-102.78 Az status=0008 Ze status=0009 00:50:58 Check angles 00:50:58 SkyScan query 00:50:58 SkyScan query done: ret=0 az=113.01<-7534 ze=-124.065<-20271 Statuses=0008 0009 00:50:58 Msec=1500 True Az=113.01 Ze=-124.065 Az status=0008 Ze status=0009 00:50:59 Check angles 00:50:59 SkyScan query 00:50:59 SkyScan query done: ret=0 az=112.995<-7533 ze=-145.485<-21699 Statuses=0008 0009 00:50:59 Msec=2250 True Az=112.995 Ze=-145.485 Az status=0008 Ze status=0009 00:50:59 Check angles 00:50:59 SkyScan query 00:51:00 SkyScan query done: ret=0 az=112.995<-7533 ze=-166.875<-23125 Statuses=0008 0009 00:51:00 Msec=3000 True Az=112.995 Ze=-166.875 Az status=0008 Ze status=0009 00:51:00 Check angles 00:51:00 SkyScan query 00:51:01 SkyScan query done: ret=0 az=112.995<-7533 ze=-173.025<-23535 Statuses=0008 0008 00:51:01 Msec=3750 True Az=112.995 Ze=-173.025 Az status=0008 Ze status=0008 00:51:01 Message to Master queued w/err=0: serial=18398 error=0 00:51:06 Received message from Master: op=Filter serial=18399 00:51:06 Color wheel filter change from 0 to 0 00:51:06 FLIGetFilterPos err=0 currentPosition=0 00:51:06 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:06 Filter is already there-color wheel unchanged 00:51:06 Received message from Master: op=Shutter serial=18400 00:51:06 Shutter LASER open 00:51:06 Received message from Camera: op=State serial=18402 00:51:06 GetSingleValue result=40 Value=cccccccc 00:51:06 SkyScan query 00:51:07 SkyScan query done: ret=0 az=112.995<-7533 ze=-172.995<-23533 Statuses=0008 0008 00:51:07 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:07 Parameters OK 00:51:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:07 Set A/D data flow result=40 00:51:07 Set A/D channel type result=40 00:51:07 Set A/D encoding result=40 00:51:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:07 Set channel filter=0.000000e+000 result=40 00:51:07 Config A/D Result=40 00:51:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:07 Get A/D filter: -9.255963e+061 result=40 00:51:07 Get A/D value=-858993460 result=40 00:51:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:07 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:07 Parameters OK 00:51:07 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:07 Set A/D data flow result=40 00:51:07 Set A/D channel type result=40 00:51:07 Set A/D encoding result=40 00:51:07 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:07 Set channel filter=0.000000e+000 result=40 00:51:07 Config A/D Result=40 00:51:07 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:07 Get A/D filter: -9.255963e+061 result=40 00:51:07 Get A/D value=-858993460 result=40 00:51:07 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:07 PH type=1 Digital in=000000 Instrument Az=112.995003 deg Ze=-172.994995 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:07 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:07 Aux= 00:51:07 Message to Camera, serial 18402 queued 00:51:09 Received message from Master: op=Shutter serial=18406 00:51:09 Shutter LASER close 00:51:09 Received message from Master: op=PointingHead serial=18410 00:51:09 Move0 PH to az=4.500000e+001 (4.100000e+001) zen=4.500000e+001 (5.150000e+001) 00:51:09 SkyScan point: az=41->2733 ze=51.5->8567 Resp=0 00:51:10 Point started: ret=0 00:51:10 point_skyscan result=0 00:51:11 Check angles 00:51:11 SkyScan query 00:51:11 SkyScan query done: ret=0 az=89.685<-5979 ze=157.065<-1529 Statuses=0009 0009 00:51:11 Msec=0 True Az=89.685 Ze=157.065 Az status=0009 Ze status=0009 00:51:11 Check angles 00:51:11 SkyScan query 00:51:12 SkyScan query done: ret=0 az=71.79<-4786 ze=135.63<-2958 Statuses=0009 0009 00:51:12 Msec=750 True Az=71.79 Ze=135.63 Az status=0009 Ze status=0009 00:51:12 Check angles 00:51:12 SkyScan query 00:51:13 SkyScan query done: ret=0 az=54.585<-3639 ze=114.63<-4358 Statuses=0009 0009 00:51:13 Msec=1500 True Az=54.585 Ze=114.63 Az status=0009 Ze status=0009 00:51:13 Check angles 00:51:13 SkyScan query 00:51:13 SkyScan query done: ret=0 az=40.875<-2725 ze=93.735<-5751 Statuses=0009 0009 00:51:13 Msec=2250 True Az=40.875 Ze=93.735 Az status=0009 Ze status=0009 00:51:14 Check angles 00:51:14 SkyScan query 00:51:14 SkyScan query done: ret=0 az=40.995<-2733 ze=72.33<-7178 Statuses=0008 0009 00:51:14 Msec=3000 True Az=40.995 Ze=72.33 Az status=0008 Ze status=0009 00:51:14 Check angles 00:51:14 SkyScan query 00:51:15 SkyScan query done: ret=0 az=40.995<-2733 ze=52.035<-8531 Statuses=0008 0009 00:51:15 Msec=3750 True Az=40.995 Ze=52.035 Az status=0008 Ze status=0009 00:51:15 Check angles 00:51:15 SkyScan query 00:51:16 SkyScan query done: ret=0 az=40.995<-2733 ze=51.48<-8568 Statuses=0008 0008 00:51:16 Msec=4500 True Az=40.995 Ze=51.48 Az status=0008 Ze status=0008 00:51:16 Message to Master queued w/err=0: serial=18410 error=0 00:51:21 Received message from Master: op=Filter serial=18411 00:51:21 Color wheel filter change from 0 to 0 00:51:21 FLIGetFilterPos err=0 currentPosition=0 00:51:21 FLIGetStepsRemaining err=0 RemainingSteps=0 00:51:21 Filter is already there-color wheel unchanged 00:51:21 Received message from Master: op=Shutter serial=18412 00:51:21 Shutter LASER close 00:51:21 Received message from Camera: op=State serial=18414 00:51:21 GetSingleValue result=40 Value=cccccccc 00:51:21 SkyScan query 00:51:22 SkyScan query done: ret=0 az=40.995<-2733 ze=51.495<-8567 Statuses=0008 0008 00:51:22 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:22 Parameters OK 00:51:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:22 Set A/D data flow result=40 00:51:22 Set A/D channel type result=40 00:51:22 Set A/D encoding result=40 00:51:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:22 Set channel filter=0.000000e+000 result=40 00:51:22 Config A/D Result=40 00:51:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:22 Get A/D filter: -9.255963e+061 result=40 00:51:22 Get A/D value=-858993460 result=40 00:51:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:22 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:51:22 Parameters OK 00:51:22 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:51:22 Set A/D data flow result=40 00:51:22 Set A/D channel type result=40 00:51:22 Set A/D encoding result=40 00:51:22 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:51:22 Set channel filter=0.000000e+000 result=40 00:51:22 Config A/D Result=40 00:51:22 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:51:22 Get A/D filter: -9.255963e+061 result=40 00:51:22 Get A/D value=-858993460 result=40 00:51:22 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:51:22 PH type=1 Digital in=000000 Instrument Az=40.994999 deg Ze=51.494999 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:51:22 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:51:22 Aux= 00:51:22 Message to Camera, serial 18414 queued 00:51:52 Received message from Master: op=PointingHead serial=18421 00:51:52 Move0 PH to az=1.620000e+002 (1.580000e+002) zen=6.000000e+001 (6.650000e+001) 00:51:52 SkyScan point: az=158->10533 ze=66.5->7567 Resp=0 00:51:53 Point started: ret=0 00:51:53 point_skyscan result=0 00:51:53 Check angles 00:51:53 SkyScan query 00:51:54 SkyScan query done: ret=0 az=64.005<-4267 ze=66.555<-7563 Statuses=0009 0008 00:51:54 Msec=0 True Az=64.005 Ze=66.555 Az status=0009 Ze status=0008 00:51:54 Check angles 00:51:54 SkyScan query 00:51:55 SkyScan query done: ret=0 az=81.975<-5465 ze=66.495<-7567 Statuses=0009 0008 00:51:55 Msec=750 True Az=81.975 Ze=66.495 Az status=0009 Ze status=0008 00:51:55 Check angles 00:51:55 SkyScan query 00:51:56 SkyScan query done: ret=0 az=99.705<-6647 ze=66.495<-7567 Statuses=0009 0008 00:51:56 Msec=1500 True Az=99.705 Ze=66.495 Az status=0009 Ze status=0008 00:51:56 Check angles 00:51:56 SkyScan query 00:51:56 SkyScan query done: ret=0 az=117.12<-7808 ze=66.495<-7567 Statuses=0009 0008 00:51:56 Msec=2250 True Az=117.12 Ze=66.495 Az status=0009 Ze status=0008 00:51:57 Check angles 00:51:57 SkyScan query 00:51:57 SkyScan query done: ret=0 az=134.64<-8976 ze=66.495<-7567 Statuses=0009 0008 00:51:57 Msec=3000 True Az=134.64 Ze=66.495 Az status=0009 Ze status=0008 00:51:57 Check angles 00:51:57 SkyScan query 00:51:58 SkyScan query done: ret=0 az=151.965<-10131 ze=66.495<-7567 Statuses=0009 0008 00:51:58 Msec=3750 True Az=151.965 Ze=66.495 Az status=0009 Ze status=0008 00:51:58 Check angles 00:51:58 SkyScan query 00:51:59 SkyScan query done: ret=0 az=158.01<-10534 ze=66.495<-7567 Statuses=0008 0008 00:51:59 Msec=4500 True Az=158.01 Ze=66.495 Az status=0008 Ze status=0008 00:51:59 Message to Master queued w/err=0: serial=18421 error=0 00:52:04 Received message from Master: op=Filter serial=18422 00:52:04 Color wheel filter change from 0 to 0 00:52:04 FLIGetFilterPos err=0 currentPosition=0 00:52:04 FLIGetStepsRemaining err=0 RemainingSteps=0 00:52:04 Filter is already there-color wheel unchanged 00:52:04 Received message from Master: op=Shutter serial=18423 00:52:04 Shutter LASER close 00:52:04 Received message from Camera: op=State serial=18425 00:52:04 GetSingleValue result=40 Value=cccccccc 00:52:04 SkyScan query 00:52:04 SkyScan query done: ret=0 az=157.995<-10533 ze=66.495<-7567 Statuses=0008 0008 00:52:04 GetVoltage: Channel=3 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:04 Parameters OK 00:52:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:04 Set A/D data flow result=40 00:52:04 Set A/D channel type result=40 00:52:04 Set A/D encoding result=40 00:52:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:04 Set channel filter=0.000000e+000 result=40 00:52:04 Config A/D Result=40 00:52:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:04 Get A/D filter: -9.255963e+061 result=40 00:52:04 Get A/D value=-858993460 result=40 00:52:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:04 GetVoltage: Channel=2 Type=S Range=0.000000e+000 - 1.000000e+001 Cutoff filter freq=0.000000e+000 00:52:04 Parameters OK 00:52:04 Calc range=-1.000000e+001 - 1.000000e+001 Gain=1.000000e+000 00:52:04 Set A/D data flow result=40 00:52:04 Set A/D channel type result=40 00:52:04 Set A/D encoding result=40 00:52:04 Set A/D range -1.000000e+001 - 1.000000e+001 result=40 00:52:04 Set channel filter=0.000000e+000 result=40 00:52:04 Config A/D Result=40 00:52:04 Get A/D range: -9.255963e+061 - -9.255963e+061 result=40 00:52:04 Get A/D filter: -9.255963e+061 result=40 00:52:04 Get A/D value=-858993460 result=40 00:52:04 Get analog voltage Code=-858993460 (2s' comp) Voltage=-4.194304e+006 Result=40 00:52:04 PH type=1 Digital in=000000 Instrument Az=157.994995 deg Ze=66.495003 deg T=-60.000000 deg p=-10.000000 Err=0 Statuses=08 08 00:52:04 ParCount=11 Vn=163 DShFSR=6.286000e+003 Lat=6.511900e+001 Lon=-1.474300e+002 Ht=2.000000e+002 Sta=5 00:52:04 Aux= 00:52:04 Message to Camera, serial 18425 queued