// CameraControlFile.txt: Parameters for the Camera functions FPIMake Andor // using Andor camera SkyMonMake SBIG //not in system here at Poker TestImageDirectory "C:\\TestImages" // name for location of images generated by tests from interface panel ReadMode rm_Image // rm_FVB, rm_MT, rm_RT, rm_ST, rm_Image AcqMode am_SS // am_DONT, am_SS, am_ACC, am_KS TrigMode tm_INT // tm_INT/, tm_EXT ShiftSpeedH 16 // Speed in micro-seconds per horizontal pixel shift ShiftSpeedV 16 // Speed in micro-seconds per vertical pixel shift ShutterMode sm_AUTO // sm_AUTO, sm_OPEN, sm_CLOSE ShutterModeExt sm_AUTO ShutterType st_TLL_HI // st_TLL_LO, st_TLL_HI ShutterOpenT 30 // Time shutter takes to open, in milli seconds ShutterCloseT 30 // Time shutter takes to close, in milli seconds FinalTemp -80 // The temperature for cooling AccumCycleT 0 // The accumulation cycle time in seconds DDGGateStep 0 // Gate step in picoseconds ExposureTime 10 // the length of time the CCD collects light prior to readout, in seconds FKHeight 0 // Sub-area height in rows FKNumber 0 // Number is series FKExposureT 0 // Exposure time in seconds FKBinMode 0 // Binning mode (0-vertical binning ON, 4-vertical binning OFF) KineticCycleT 0 // The kinetic cycle time in seconds FKVShiftSpeed 0 // Speed in micro-secons per pixel shift HorizonBin 2 // Number of pixels to bin horizontally VerticalBin 2 // Number of pixels to bin vertically FullImageCol0 1 // Start column (inclusive) FullImageCol1 1024 // End column (inclusive) FullImageRow0 1 // Start row (inclusive) FullImageRow1 1024 // End row (inclusive) MultiTrackNum 0 // Number tracks, valid values 1 to number of vertical pixels MultiTrackHeight 0 // Height of each track, valid values > 0 (maximum depends on number of tracks) MultiTrackOffset 0 // Vertical displacement of tracks, MultiTrackBottom 0 // First pixels row of the first track MultiTrackGap 0 // Number of rows between each track AccumScanNum 0 // Number of scans to accumulate KineticScanNum 0 // Number of scans to store RandomTrackNum 0 // Number tracks, valid values 1 to number of vertical pixel/2 SingleTrackCenter 0 // Centre row of track, valid range 0 to number of vertical pixels SingleTrackHeight 0 // Height of track, valid range > 1 USBPort 1 // which USB port the sky monitor is connected to PreAmpGain 1 ADChannel 0 OutputAmpType 0 // standard EMCCD gain register EMAdvanced 0 // disable access to higher EM gain levels EMGainMode 0 // EM gain controlled by DAC settings in the range 0-255 EMCCDGain 4 CoolerMode 1 // cooler maintains temperature even after shutdown