14:19:59 Starting Camera v1.37  2/13/15
14:19:59 Startup delay was 0 sec
14:19:59 Process ID=13616  UTC is 2015-5-8  14:19:59.580; local time is 2015-5-8  14:19:59.580 Coordinated Universal Time (diff=0 min)
14:20:11 Camera selection is Andor FPI imager
14:20:11 Test panel operation: Initialize camera
14:20:11 Current directory is C:\PKZPrograms  Length=14
14:20:19 Successfully initialized the camera
14:20:19 Detector size is 1024 X 1024
14:20:19 PCB version is 52428

Flex 10k file version is 52428
14:20:19 EPROM version is 0   COF file version is 0
14:20:19 Driver Revision number is 0   Driver version is 0
14:20:19 DLL revision is 98   DLL version is 2
14:20:19 GetNumberAmp returned 1
14:20:19 Amplifier 0 "Conventional"
14:20:19 GetAmpMaxSpeed 0 returned 5
14:20:19 GetAvailableCameras returned 1
14:20:19 GetCameraSerialNumber returned 17229
14:20:19 GetCapabilities (hex, except camera type):
14:20:19 AcqModes=2F  CameraType=13 iKon  EMGainCapability=0  Features=6A078F
14:20:19 FTReadModes=7  GetFunctions=800D  PCICard=0  PixelMode=4
14:20:19 ReadModes=3F  SetFunctions=7E67  Size=30  TriggerModes=13
14:20:19 SetFunctions:
The vertical readout speed can be set with the SetVSSpeed function.
The horizontal readout speed can be set with the SetHSSpeed function.
The target temperature can be set using the SetTemperature function.
Baseline clamp can be turned on or off with the SetBaselineClamp function.
The vertical clock voltage can be set with the SetVSAmplitude function.
The pre amp gain can be set with the SetPreAmpGain function.
Crop mode can be selected using the SetCropMode or SetIsolatedCropMode functions.
The DMA parameters can be set with the SetDMAParameters function.
The horizontal binning can be set for the relative read mode.
The multitrack horizontal range can be set using the SetMultiTrackHRange function.
Random tracks can be set with no gaps in between with the SetRandomTracks or SetComplexImage functions.
The current temperature can be determined using the GetTemperature function.
The range of possible temperatures can be determined using the GetTemperatureRange function.
The gain can be determined using the GetEMCCDGain function.

14:20:19 SetFunctions:
The status of the current acquisition can be determined through the GetStatus function call.
A Windows Event can be passed to the SDK to alert the user at certain stages of the Acquisition. See SetDriverEvent
Acquisition Data can be made to spool to disk using the SetSpool function.
Shutter settings can be adjusted through the SetShutter function.
Fan settings can be adjusted through the SetFanMode function.
It is possible to select a low fan setting through the SetFanMode function.
It is possible to read the camera temperature during an acquisition with the GetTemperature function.
It is possible to turn off keep cleans between scans.
System supports photon counting. See SetPhotonCounting.
Dual exposure mode. See SetDualExposureMode.

14:20:19 ControllerCardModel "USB"
14:20:19 Camera handle 0
14:20:19 Detector 1024 x 1024
14:20:19 EMCCDGain 0
14:20:19 EMGainRange 1 to 255
14:20:19 Fastest recommended vertical shift speed index=1 11.2875 usec per pixel shift
14:20:19 Filter mode 0
14:20:19 Head model "DU934P_BV"
14:20:19 Channel  Depth (bits)  Number of A/D channels=1
14:20:19     0        16
14:20:19 Number of pre-amp gains=3
14:20:19 Index Gain
14:20:19  0        1
14:20:19  1        2
14:20:19  2        4
14:20:19 Number of horizontal shift speeds for channel 0 type 0 is 4
14:20:19 Index   Speed, MHz*    Speed, usec/pixel  Pre-amp gains
14:20:19  0             5             0.2          1.000000 2.000000 4.000000 
14:20:19  1             3        0.333333          1.000000 2.000000 4.000000 
14:20:19  2             1               1          1.000000 2.000000 4.000000 
14:20:19  3          0.05              20          1.000000 2.000000 4.000000 
14:20:19 GetNumberHSSpeeds error 20067
14:20:19 Number of vertical shift speeds is 5
14:20:19 Index   Speed in MHz  Speed in usec*
14:20:19  0      0.175747            5.69 
14:20:19  1      0.088574           11.29 
14:20:19  2      0.0444642           22.49 
14:20:19  3      0.0222767           44.89 
14:20:19  4      0.014861           67.29 
14:20:19 Maximum binning horiz=1024 vert=1024
14:20:19 Maximum exposure time is 32768 sec
14:20:19 Pixel size 13 x 13 microns
14:20:34 Camera selection is Andor FPI imager
14:20:34 Test panel operation: Get temperature
14:20:34 Get Temperature status: Temperature is OFF
14:20:34 Current temperature is 22 (C)
14:20:47 * END OF LOG *