00:54:42 Starting Camera v1.37 2/13/15 00:54:42 Startup delay was 0 sec 00:54:42 Process ID=1344 UTC is 2015-3-26 00:54:42.030; local time is 2015-3-26 00:54:42.030 Coordinated Universal Time (diff=0 min) 00:55:24 Camera selection is Andor FPI imager 00:55:24 Test panel operation: Initialize camera 00:55:24 Current directory is C:\PKZPrograms Length=14 00:55:29 Successfully initialized the camera 00:55:29 Detector size is 1024 X 1024 00:55:29 PCB version is 52428 Flex 10k file version is 52428 00:55:29 EPROM version is 0 COF file version is 0 00:55:29 Driver Revision number is 0 Driver version is 0 00:55:29 DLL revision is 98 DLL version is 2 00:55:29 GetNumberAmp returned 1 00:55:29 Amplifier 0 "Conventional" 00:55:29 GetAmpMaxSpeed 0 returned 5 00:55:29 GetAvailableCameras returned 1 00:55:29 GetCameraSerialNumber returned 17229 00:55:29 GetCapabilities (hex, except camera type): 00:55:29 AcqModes=2F CameraType=13 iKon EMGainCapability=0 Features=6A078F 00:55:29 FTReadModes=7 GetFunctions=800D PCICard=0 PixelMode=4 00:55:29 ReadModes=3F SetFunctions=7E67 Size=30 TriggerModes=13 00:55:29 SetFunctions: The vertical readout speed can be set with the SetVSSpeed function. The horizontal readout speed can be set with the SetHSSpeed function. The target temperature can be set using the SetTemperature function. Baseline clamp can be turned on or off with the SetBaselineClamp function. The vertical clock voltage can be set with the SetVSAmplitude function. The pre amp gain can be set with the SetPreAmpGain function. Crop mode can be selected using the SetCropMode or SetIsolatedCropMode functions. The DMA parameters can be set with the SetDMAParameters function. The horizontal binning can be set for the relative read mode. The multitrack horizontal range can be set using the SetMultiTrackHRange function. Random tracks can be set with no gaps in between with the SetRandomTracks or SetComplexImage functions. The current temperature can be determined using the GetTemperature function. The range of possible temperatures can be determined using the GetTemperatureRange function. The gain can be determined using the GetEMCCDGain function. 00:55:29 SetFunctions: The status of the current acquisition can be determined through the GetStatus function call. A Windows Event can be passed to the SDK to alert the user at certain stages of the Acquisition. See SetDriverEvent Acquisition Data can be made to spool to disk using the SetSpool function. Shutter settings can be adjusted through the SetShutter function. Fan settings can be adjusted through the SetFanMode function. It is possible to select a low fan setting through the SetFanMode function. It is possible to read the camera temperature during an acquisition with the GetTemperature function. It is possible to turn off keep cleans between scans. System supports photon counting. See SetPhotonCounting. Dual exposure mode. See SetDualExposureMode. 00:55:29 ControllerCardModel "USB" 00:55:29 Camera handle 0 00:55:29 Detector 1024 x 1024 00:55:29 EMCCDGain 0 00:55:29 EMGainRange 1 to 255 00:55:29 Fastest recommended vertical shift speed index=1 11.2875 usec per pixel shift 00:55:29 Filter mode 0 00:55:29 Head model "DU934P_BV" 00:55:29 Channel Depth (bits) Number of A/D channels=1 00:55:29 0 16 00:55:29 Number of pre-amp gains=3 00:55:29 Index Gain 00:55:29 0 1 00:55:29 1 2 00:55:29 2 4 00:55:29 Number of horizontal shift speeds for channel 0 type 0 is 4 00:55:29 Index Speed, MHz* Speed, usec/pixel Pre-amp gains 00:55:29 0 5 0.2 1.000000 2.000000 4.000000 00:55:29 1 3 0.333333 1.000000 2.000000 4.000000 00:55:29 2 1 1 1.000000 2.000000 4.000000 00:55:29 3 0.05 20 1.000000 2.000000 4.000000 00:55:29 GetNumberHSSpeeds error 20067 00:55:29 Number of vertical shift speeds is 5 00:55:29 Index Speed in MHz Speed in usec* 00:55:29 0 0.175747 5.69 00:55:29 1 0.088574 11.29 00:55:29 2 0.0444642 22.49 00:55:29 3 0.0222767 44.89 00:55:29 4 0.014861 67.29 00:55:29 Maximum binning horiz=1024 vert=1024 00:55:29 Maximum exposure time is 32768 sec 00:55:29 Pixel size 13 x 13 microns 00:55:52 Camera selection is Andor FPI imager 00:55:52 Test panel operation: Start acquisition 00:55:52 Rq exposure time=0.300000 Actual=0.300000 00:55:52 Requested horizontal shift speed of 16.000000 usec not available; using type 0 speed 20.000000 00:55:52 Pre-amp gain=1.000000 00:55:52 Requested vertical shift speed of 16.000000 usec not available; using 22.490000 00:55:53 Starting acquisition 00:56:09 Camera selection is Andor FPI imager 00:56:09 Test panel operation: Copy acquired data from camera to array 00:56:09 pImageArray=0 00:56:09 Data copied to 6C00040 00:56:21 Camera selection is Andor FPI imager 00:56:21 Test panel operation: Save acquired data to file 00:56:21 Output file C:\\TestImages\TestFile007.img opened for FPI-Andor image at 6C00040 00:56:21 Wrote 1024 header and 524288 image bytes 00:57:06 * END OF LOG *