21:16:59 Starting Camera v1.30  1/9/14
21:16:59 Startup delay was 0 sec
21:16:59 Process ID=3468  UTC is 2015-3-24  21:16:59.999; local time is 2015-3-24  21:16:59.999 Coordinated Universal Time (diff=0 min)
21:17:19 Camera selection is Andor FPI imager
21:17:19 Test panel operation: Initialize camera
21:17:19 Current directory is C:\PKZPrograms  Length=14
21:17:23 Successfully initialized the camera
21:17:23 Detector size is 1024 X 1024
21:17:23 PCB version is 4107

Flex 10k file version is 1461
21:17:23 EPROM version is 0   COF file version is 0
21:17:23 Driver Revision number is 0   Driver version is 0
21:17:23 DLL revision is 98   DLL version is 2
21:17:23 GetNumberAmp returned 1
21:17:23 Amplifier 0 "Conventional"
21:17:23 GetAmpMaxSpeed 0 returned 5
21:17:23 GetAvailableCameras returned 1
21:17:23 GetCameraSerialNumber returned 17229
21:17:23 GetCapabilities (hex, except camera type):
21:17:23 AcqModes=2F  CameraType=13 iKon  EMGainCapability=0  Features=6A078F
21:17:23 FTReadModes=7  GetFunctions=800D  PCICard=0  PixelMode=4
21:17:23 ReadModes=3F  SetFunctions=7E67  Size=30  TriggerModes=13
21:17:23 SetFunctions:
The vertical readout speed can be set with the SetVSSpeed function.
The horizontal readout speed can be set with the SetHSSpeed function.
The target temperature can be set using the SetTemperature function.
Baseline clamp can be turned on or off with the SetBaselineClamp function.
The vertical clock voltage can be set with the SetVSAmplitude function.
The pre amp gain can be set with the SetPreAmpGain function.
Crop mode can be selected using the SetCropMode or SetIsolatedCropMode functions.
The DMA parameters can be set with the SetDMAParameters function.
The horizontal binning can be set for the relative read mode.
The multitrack horizontal range can be set using the SetMultiTrackHRange function.
Random tracks can be set with no gaps in between with the SetRandomTracks or SetComplexImage functions.
The current temperature can be determined using the GetTemperature function.
The range of possible temperatures can be determined using the GetTemperatureRange function.
The gain can be determined using the GetEMCCDGain function.

21:17:23 SetFunctions:
The status of the current acquisition can be determined through the GetStatus function call.
A Windows Event can be passed to the SDK to alert the user at certain stages of the Acquisition. See SetDriverEvent
Acquisition Data can be made to spool to disk using the SetSpool function.
Shutter settings can be adjusted through the SetShutter function.
Fan settings can be adjusted through the SetFanMode function.
It is possible to select a low fan setting through the SetFanMode function.
It is possible to read the camera temperature during an acquisition with the GetTemperature function.
It is possible to turn off keep cleans between scans.
System supports photon counting. See SetPhotonCounting.
Dual exposure mode. See SetDualExposureMode.

21:17:23 ControllerCardModel "USB"
21:17:23 Camera handle 0
21:17:23 Detector 1024 x 1024
21:17:23 EMCCDGain 0
21:17:23 EMGainRange 1 to 255
21:17:23 Fastest recommended vertical shift speed index=1 11.2875 usec per pixel shift
21:17:23 Filter mode 0
21:17:23 Head model "DU934P_BV"
21:17:23 Channel  Depth (bits)  Number of A/D channels=1
21:17:23     0        16
21:17:23 Number of pre-amp gains=3
21:17:23 Index Gain
21:17:23  0        1
21:17:23  1        2
21:17:23  2        4
21:17:23 Number of horizontal shift speeds for channel 0 type 0 is 4
21:17:23 Index   Speed, MHz*    Speed, usec/pixel  Pre-amp gains
21:17:23  0             5             0.2          1.000000 2.000000 4.000000 
21:17:23  1             3        0.333333          1.000000 2.000000 4.000000 
21:17:23  2             1               1          1.000000 2.000000 4.000000 
21:17:23  3          0.05              20          1.000000 2.000000 4.000000 
21:17:23 GetNumberHSSpeeds error 20067
21:17:23 Number of vertical shift speeds is 5
21:17:23 Index   Speed in MHz  Speed in usec*
21:17:23  0      0.175747            5.69 
21:17:23  1      0.088574           11.29 
21:17:23  2      0.0444642           22.49 
21:17:23  3      0.0222767           44.89 
21:17:23  4      0.014861           67.29 
21:17:23 Maximum binning horiz=1024 vert=1024
21:17:23 Maximum exposure time is 32768 sec
21:17:23 Pixel size 13 x 13 microns
21:17:45 Camera selection is Andor FPI imager
21:17:45 Test panel operation: Start acquisition
21:17:45 Rq exposure time=1.000000  Actual=1.000000
21:17:45 Requested horizontal shift speed of 16.000000 usec not available; using type 0 speed 20.000000
21:17:45 Pre-amp gain=1.000000
21:17:45 Requested vertical shift speed of 16.000000 usec not available; using 22.490000
21:17:47 Starting acquisition
21:17:53 Camera selection is Andor FPI imager
21:17:53 Test panel operation: Copy acquired data from camera to array
21:17:53 pImageArray=0
21:17:53 Copy acquired data error 20072
21:18:04 Camera selection is Andor FPI imager
21:18:04 Test panel operation: Save acquired data to file
21:18:04 Output file C:\\TestImages\TestFile005.img opened for FPI-Andor image at 69E0040
21:18:04 Wrote 1024 header and 524288 image bytes
21:18:46 * END OF LOG *